| Age | Commit message (Collapse) | Author |
|---|
|
* pm-cpuidle:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
|
|
Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after
programming IRTE"), smatch warns:
drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode()
warn: variable dereferenced before check 'entry' (see line 3867)
Fix this by moving the @valid assignment to after @entry has been checked
for NULL.
Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There have been some reports of "bad bp value" warnings printed by the
frame pointer unwinder:
WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is a fix for the first chunk size calculation where the variable
length array incorrectly used the number of longs instead of bytes of
longs.
This came in as a code fix and not a bug report, so I don't think it
was widely problematic. I believe it worked out due to it being
memblock memory and alignment requirements working in our favor"
* 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: fix first chunk size calculation for populated bitmap
|
|
Pull drm fixes from Dave Airlie:
"A bunch of small fixes, some of the i915 ones have been out for a
while and got better commit msg explaining some better reasoning
behind them (hopefully this trend continues).
Otherwise there a few AMD related ones mostly small, one radeon PLL
regression fix and a bunch of small mediatek fixes.
amdgpu:
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
amdkfd:
- Fix a GPU reset crash
- Fix a memory leak
radeon:
- Revert a PLL fix that broke other boards
i915:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
mediatek:
- Fix scrolling of panel
- Remove duplicated include
- Use CPU when fail to get cmdq event
- Add missing put_device() call"
* tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amd/display: Don't log hdcp module warnings in dmesg
drm/amdgpu: declare ta firmware for navy_flounder
drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()
drm/mediatek: Add missing put_device() call in mtk_drm_kms_init()
drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail
drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init()
drm/mediatek: Use CPU when fail to get cmdq event
drm/mediatek: Remove duplicated include
drm/i915: Filter wake_flags passed to default_wake_function
drm/i915: Be wary of data races when reading the active execlists
drm/i915/gem: Reduce context termination list iteration guard to RCU
drm/i915/gem: Delay tracking the GEM context until it is registered
drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is
drm/radeon: revert "Prefer lower feedback dividers"
drm/amdgpu: Include sienna_cichlid in USBC PD FW support.
drm/amd/display: update nv1x stutter latencies
drm/amd/display: Don't use DRM_ERROR() for DTM add topology
drm/amd/pm: support runtime pptable update for sienna_cichlid etc.
drm/amdkfd: fix a memory leak issue
drm/kfd: fix a system crash issue during GPU recovery
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.9
1. Fix scrolling of panel
2. Remove duplicated include
3. Use CPU when fail to get cmdq event
4. Add missing put_device() call
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
|
|
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc6:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.9-2020-09-17:
amdgpu:
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
amdkfd:
- Fix a GPU reset crash
- Fix a memory leak
radeon:
- Revert a PLL fix that broke other boards
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com
|
|
i2c_acpi_register_devices()
Some ACPI i2c-devices _STA method (which is used to detect if the device
is present) use autodetection code which probes which device is present
over i2c. This requires the I2C ACPI OpRegion handler to be registered
before we enumerate i2c-clients under the i2c-adapter.
This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and
ThinkBook 15 IIL not getting an i2c-client instantiated and thus not
working.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Two small fixes for SNI machines"
* tag 'mips_fixes_5.9_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: SNI: Fix spurious interrupts
MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
|
|
Variable populated, which is a member of struct pcpu_chunk, is used as a
unit of size of unsigned long.
However, size of populated is miscounted. So, I fix this minor part.
Fixes: 8ab16c43ea79 ("percpu: change the number of pages marked in the first_chunk pop bitmap")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Sunghyun Jin <mcsmonk@gmail.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made
the page locking entirely fair, in that if a waiter came in while the
lock was held, the lock would be transferred to the lockers strictly in
order.
That was intended to finally get rid of the long-reported watchdog
failures that involved the page lock under extreme load, where a process
could end up waiting essentially forever, as other page lockers stole
the lock from under it.
It also improved some benchmarks, but it ended up causing huge
performance regressions on others, simply because fair lock behavior
doesn't end up giving out the lock as aggressively, causing better
worst-case latency, but potentially much worse average latencies and
throughput.
Instead of reverting that change entirely, this introduces a controlled
amount of unfairness, with a sysctl knob to tune it if somebody needs
to. But the default value should hopefully be good for any normal load,
allowing a few rounds of lock stealing, but enforcing the strict
ordering before the lock has been stolen too many times.
There is also a hint from Matthieu Baerts that the fair page coloring
may end up exposing an ABBA deadlock that is hidden by the usual
optimistic lock stealing, and while the unfairness doesn't fix the
fundamental issue (and I'm still looking at that), it avoids it in
practice.
The amount of unfairness can be modified by writing a new value to the
'sysctl_page_lock_unfairness' variable (default value of 5, exposed
through /proc/sys/vm/page_lock_unfairness), but that is hopefully
something we'd use mainly for debugging rather than being necessary for
any deep system tuning.
This whole issue has exposed just how critical the page lock can be, and
how contended it gets under certain locks. And the main contention
doesn't really seem to be anything related to IO (which was the origin
of this lock), but for things like just verifying that the page file
mapping is stable while faulting in the page into a page table.
Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/
Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1
Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/
Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Steal time initialization requires mapping a memory region which
invokes a memory allocation. Doing this at CPU starting time results
in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at mm/slab.h:498
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1
Call trace:
dump_backtrace+0x0/0x208
show_stack+0x1c/0x28
dump_stack+0xc4/0x11c
___might_sleep+0xf8/0x130
__might_sleep+0x58/0x90
slab_pre_alloc_hook.constprop.101+0xd0/0x118
kmem_cache_alloc_node_trace+0x84/0x270
__get_vm_area_node+0x88/0x210
get_vm_area_caller+0x38/0x40
__ioremap_caller+0x70/0xf8
ioremap_cache+0x78/0xb0
memremap+0x9c/0x1a8
init_stolen_time_cpu+0x54/0xf0
cpuhp_invoke_callback+0xa8/0x720
notify_cpu_starting+0xc8/0xd8
secondary_start_kernel+0x114/0x180
CPU1: Booted secondary processor 0x0000000001 [0x431f0a11]
However we don't need to initialize steal time at CPU starting time.
We can simply wait until CPU online time, just sacrificing a bit of
accuracy by returning zero for steal time until we know better.
While at it, add __init to the functions that are only called by
pv_time_init() which is __init.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
read() needs to check whether the device has been
disconnected before it tries to talk to the device.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Running the eBPF test_verifier leads to random errors looking like this:
[ 6525.735488] Unexpected kernel BRK exception at EL1
[ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP
[ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x
[ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47
[ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020
[ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.820832] sp : ffff8000130cbb80
[ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000
[ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000
[ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038
[ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080
[ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000
[ 6525.850682] x19: 0000000000000000 x18: 0000000000000000
[ 6525.855990] x17: 0000000000000000 x16: 0000000000000000
[ 6525.861298] x15: 0000000000000000 x14: 0000000000000000
[ 6525.866606] x13: 0000000000000000 x12: 0000000000000000
[ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c
[ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38
[ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881
[ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f
[ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374
[ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009
[ 6525.903760] Call trace:
[ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20
[ 6525.920398] bpf_test_run+0x70/0x1b0
[ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190
[ 6525.928326] __do_sys_bpf+0xc88/0x1b28
[ 6525.932072] __arm64_sys_bpf+0x24/0x30
[ 6525.935820] el0_svc_common.constprop.0+0x70/0x168
[ 6525.940607] do_el0_svc+0x28/0x88
[ 6525.943920] el0_sync_handler+0x88/0x190
[ 6525.947838] el0_sync+0x140/0x180
[ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000)
[ 6525.957249] ---[ end trace cecc3f93b14927e2 ]---
The reason is the offset[] creation and later usage, while building
the eBPF body. The code currently omits the first instruction, since
build_insn() will increase our ctx->idx before saving it.
That was fine up until bounded eBPF loops were introduced. After that
introduction, offset[0] must be the offset of the end of prologue which
is the start of the 1st insn while, offset[n] holds the
offset of the end of n-th insn.
When "taken loop with back jump to 1st insn" test runs, it will
eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is
permitted, the current outcome depends on the value stored in
ctx->offset[-1], which has nothing to do with our array.
If the value happens to be 0 the tests will work. If not this error
triggers.
commit 7c2e988f400e ("bpf: fix x64 JIT code generation for jmp to 1st insn")
fixed an indentical bug on x86 when eBPF bounded loops were introduced.
So let's fix it by creating the ctx->offset[] differently. Track the
beginning of instruction and account for the extra instruction while
calculating the arm instruction offsets.
Fixes: 2589726d12a1 ("bpf: introduce bounded loops")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The CRC calculation done by genksyms is triggered when the parser hits
EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the
types of the function parameters, and uses that as the input for the CRC
calculation. In the case of forward-declared structs, the type expands
to 'UNKNOWN'. Following this, it appears that the result of the
expansion of each type is cached somewhere, and seems to be re-used
when/if the same type is seen again for another exported symbol in the
same C file.
Unfortunately, this can cause CRC 'stability' issues when a struct
definition becomes visible in the middle of a C file. For example, let's
assume code with the following pattern:
struct foo;
int bar(struct foo *arg)
{
/* Do work ... */
}
EXPORT_SYMBOL_GPL(bar);
/* This contains struct foo's definition */
#include "foo.h"
int baz(struct foo *arg)
{
/* Do more work ... */
}
EXPORT_SYMBOL_GPL(baz);
Here, baz's CRC will be computed using the expansion of struct foo that
was cached after bar's CRC calculation ('UNKOWN' here). But if
EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol
trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded
late, during baz's CRC calculation, which now has visibility over the
full struct definition, hence resulting in a different CRC for baz.
The proper fix for this certainly is in genksyms, but that will take me
some time to get right. In the meantime, we have seen one occurrence of
this in the ehci-hcd code which hits this problem because of the way it
includes C files halfway through the code together with an unlucky mix
of symbol trimming.
In order to workaround this, move the include done in ehci-hub.c early
in ehci-hcd.c, hence making sure the struct definitions are visible to
the entire file. This improves CRC stability of the ehci-hcd exports
even when symbol trimming is enabled.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()
[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The firmware provided via MODULE_FIRMWARE appears in the
module information. External tools(eg. dracut) may use the
list of fw files to include them as appropriate in an initramfs,
thus missing declaration will lead to request firmware failure
in boot time.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it
fail, previous successive init component is not proccessed.
Thus uninitialize valid component and put their device if component
init failed.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: d0afe37f5209 ("drm/mediatek: support CMDQ interface in ddp component")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Even though cmdq client is created successfully, without the cmdq event,
cmdq could not work correctly, so use CPU when fail to get cmdq event.
Fixes: 60fa8c13ab1a ("drm/mediatek: Move gce event property to mutex device node")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Remove mtk_drm_ddp.h which is included more than once
Fixes: 9aef5867c86c ("drm/mediatek: drop use of drmP.h")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.
Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Set PERF_SAMPLE_PERIOD if attr->freq is set.
- Remove trailing commas from AMD JSON vendor event files.
- Don't clear event's period if set by a event definition term.
- Leader sampling shouldn't clear sample period in 'perf test'.
- Fix the "signal" test inline assembly when built with DEBUG=1.
- Fix memory leaks detected by ASAN, some in normal paths, some in
error paths.
- Fix 2 memory sanitizer warnings in 'perf bench'.
- Fix the ratio comments of miss-events in 'perf stat'.
- Prevent override of attr->sample_period for libpfm4 events.
- Sync kvm.h and in.h headers with the kernel sources.
* tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Fix the ratio comments of miss-events
perf test: Free formats for perf pmu parse test
perf metric: Do not free metric when failed to resolve
perf metric: Free metric when it failed to resolve
perf metric: Release expr_parse_ctx after testing
perf test: Fix memory leaks in parse-metric test
perf parse-event: Fix memory leak in evsel->unit
perf evlist: Fix cpu/thread map leak
perf metric: Fix some memory leaks - part 2
perf metric: Fix some memory leaks
perf test: Free aliases for PMU event map aliases test
perf vendor events amd: Remove trailing commas
perf test: Leader sampling shouldn't clear sample period
perf record: Don't clear event's period if set by a term
tools headers UAPI: update linux/in.h copy
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Prevent override of attr->sample_period for libpfm4 events
perf record: Set PERF_RECORD_PERIOD if attr->freq is set.
perf bench: Fix 2 memory sanitizer warnings
perf test: Fix the "signal" test inline assembly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"A handful of clk driver fixes. Mostly they're for error paths or
improper memory allocations sizes. Nothing as exciting as a wildfire"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe()
clk: versatile: Add of_node_put() before return statement
clk: bcm: dvp: Select the reset framework
clk: rockchip: Fix initialization of mux_pll_src_4plls_p
clk: davinci: Use the correct size when allocating memory
|
|
Max's and Shravan's usernames were changed while @mellanox.com emails
were transferred to be @nvidia.com.
Fixes: f6da70d99c96 ("MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The C3 BusMaster idle code takes lock in a number of places, some deep
inside the ACPI code. Instead of wrapping it all in RCU_NONIDLE, have
the driver take over RCU-idle duty and avoid flipping RCU state back
and forth a lot.
( by marking 'C3 && bm_check' as RCU_IDLE, we _must_ call enter_bm() for
that combination, otherwise we'll loose RCU-idle, this requires
shuffling some code around )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make acpi_processor_idle use the common broadcast code, there's no
reason not to. This also removes some RCU usage after
rcu_idle_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
|
|
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache,
iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is
caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all
L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache
accesses" seems better.
The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are
fixed in the same way.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
syzbot is reporting OOB read at fbcon_resize() [1], for
commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change
from causing potential out-of-bounds access") is by error using
registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was
set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains
zero for that display).
We could remove tricky userfont flag [2], for we can determine it by
comparing address of the font data and addresses of built-in font data.
But since that commit is failing to fix the original OOB read [3], this
patch keeps the change minimal in case we decide to revert altogether.
[1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920
[2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000
[3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9
Reported-by: syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simply add Lakefield model ID. No additional changes are needed.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Minor subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
These serial ports are exposed by the OOB-management-engine on
RealManage-enabled network cards (e.g. AMD DASH enabled systems using
Realtek cards).
Because these have 3 BARs, they fail the "num_iomem <= 1" check in
serial_pci_guess_board.
I've manually checked the two IOMEM regions and BAR 2 doesn't seem to
respond to reads, but BAR 4 seems to be an MMIO version of the IO ports
(untested).
With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A
0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A
lspci output:
02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550])
Subsystem: 17aa:5082
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 82
IOMMU group: 11
Region 0: I/O ports at 2200 [size=256]
Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [170 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [178 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
02:00.2 0700: 10ec:816b (rev 0e)
[...same...]
Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the port-lock initialisation regression introduced by commit
a3cb39d258ef ("serial: core: Allow detach and attach serial device for
console") by making sure that the lock is again initialised during
console setup.
The console may be registered before the serial controller has been
probed in which case the port lock needs to be initialised during
console setup by a call to uart_set_options(). The console-detach
changes introduced a regression in several drivers by effectively
removing that initialisation by not initialising the lock when the port
is used as a console (which is always the case during console setup).
Add back the early lock initialisation and instead use a new
console-reinit flag to handle the case where a console is being
re-attached through sysfs.
The question whether the console-detach interface should have been added
in the first place is left for another discussion.
Note that the console-enabled check in uart_set_options() is not
redundant because of kgdboc, which can end up reinitialising an already
enabled console (see commit 42b6a1baa3ec ("serial_core: Don't
re-initialize a previously initialized spinlock.")).
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit f743061a85f5 ("serial: core: Initialise spin lock before use in
uart_configure_port()") tried to work around a breakage introduced by
commit a3cb39d258ef ("serial: core: Allow detach and attach serial
device for console") by adding a second initialisation of the port lock
when registering the port.
As reported by the build robots [1], this doesn't really solve the
regression introduced by the console-detach changes and also adds a
second redundant initialisation of the lock for normal ports.
Start cleaning up this mess by removing the redundant initialisation and
making sure that the port lock is again initialised once-only for ports
that aren't already in use as a console.
[1] https://lore.kernel.org/r/20200802054852.GR23458@shao2-debian
Fixes: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()")
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check and return if there are errors. The response bits are valid
only on no errors.
Fixes: b7404a29cd3d ("usb: typec: intel_pmc_mux: Definitions for response status bits")
Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916091102.27118-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook.
This notebook come with usb touchpad. And we would like to disable
touchpad wakeup on this notebook by default.
Signed-off-by: Penghao <penghao@uniontech.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SCSI layer can go into an ugly loop if you ignore that a device is
gone. You need to report an error in the command rather than in the
return value of the queue method.
We need to specifically check for ENODEV. The issue goes back to the
introduction of the driver.
Fixes: 115bb1ffa54c3 ("USB: Add UAS driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes the embedded controller firmware does not
terminate the list of alternate modes that the partner
supports in its response to the GET_ALTERNATE_MODES command.
Instead the firmware returns the supported alternate modes
over and over again until the driver stops requesting them.
If that happens, the number of modes for each alternate mode
will exceed the maximum 6 that is defined in the USB Power
Delivery specification. Making sure that can't happen by
adding a check for it.
This fixes NULL pointer dereference that is caused by the
overrun.
Fixes: ad74b8649beaf ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-by: Zwane Mwaikambo <zwanem@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UCSI specification quite clearly states that if a command
can't be completed in 10ms, the firmware must notify
about BUSY condition. Unfortunately almost none of the
platforms (the firmware on them) generate the BUSY
notification even if a command can't be completed in time.
The driver already considered that, and used a timeout
value of 5 seconds, but processing especially the alternate
mode discovery commands takes often considerable amount of
time from the firmware, much more than the 5 seconds. That
happens especially after bootup when devices are already
connected to the USB Type-C connector. For now on those
platforms the alternate mode discovery has simply failed
because of the timeout.
To improve the situation, increasing the timeout value for
the command completion to 1 minute. That should give enough
time for even the slowest firmware to process the commands.
Fixes: f56de278e8ec ("usb: typec: ucsi: acpi: Move to the new API")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110
Fixes: ef4688497512 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f4b3c395540aa3d4f5a6275c5bdd83ab89034806)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b4d9145b0154f8c71dafc2db5fd445f1f3db9426)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 736e785f9b28cd9ef2d16a80960a04fd00e64b22)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: CQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa387171 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eb4dedae920a07c485328af3da2202ec5184fb17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
