summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-16ring-buffer: Add integrity check at end of iter readSteven Rostedt
There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16ring-buffer: Make addition of pages in ring buffer atomicVaibhav Nagarnaik
This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16ring-buffer: Make removal of ring buffer pages atomicVaibhav Nagarnaik
This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16tracing: Clean up tracing_mark_write()Steven Rostedt
On gcc 4.5 the function tracing_mark_write() would give a warning of page2 being uninitialized. This is due to a bug in gcc because the logic prevents page2 from being used uninitialized, and gcc 4.6+ does not complain (correctly). Instead of adding a "unitialized" around page2, which could show a bug later on, I combined page1 and page2 into an array map_pages[]. This binds the two and the two are modified according to nr_pages (what gcc 4.5 seems to ignore). This no longer gives a warning with gcc 4.5 nor with gcc 4.6. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-14perf/x86/ibs: Fix undefined reference to `get_ibs_caps'Robert Richter
Fixing i386 allnoconfig built errors: arch/x86/built-in.o: In function `amd_pmu_hw_config': perf_event_amd.c:(.text+0xc3e1): undefined reference to `get_ibs_caps' Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-14Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Arjan & Linus Annotation Edition - Fix indirect calls beautifier, reported by Linus. - Use the objdump comments to nuke specificities about how access to a well know variable is encoded, suggested by Linus. - Show the number of places that jump to a target, requested by Arjan. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-12perf annotate browser: Add key bindings help windowArnaldo Carvalho de Melo
Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1txmtzf71eqie5xcukbfxors@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12perf annotate browser: Show 'jumpy' functionsArnaldo Carvalho de Melo
Just press 'J' and see how many places jump to jump targets. The hottest jump target appears in red, targets with more than one source have a different color than single source jump targets. Suggested-by: Arjan van de Ven <arjan@infradead.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7452y0dmc02a20ooins7rn79@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12perf annotate browser: Count the numbers of jump sources to a targetArnaldo Carvalho de Melo
Instead of simply marking an offset as a jump target. So that we can implement a new feature: showing "jumpy" targets, I.e. addresses that lots of places jump to. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vc7b0u5yxgrubig0q61ayhxf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12perf annotate: Introduce ->free() method in ins_opsArnaldo Carvalho de Melo
So that we don't special case disasm_line__free, allowing each instruction class to provide an specialized destructor, like is needed for 'lock'. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-xxw4vs5n077tf35jsvjzylhb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12perf annotate: Augment lock instruction outputArnaldo Carvalho de Melo
It just chops off the 'lock' and uses the ins__find, etc machinery to call instruction specific parsers/beautifiers. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-4913ba2dzakz5rivgumosqbh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11perf annotate: Resolve symbols using objdump comment for single op insArnaldo Carvalho de Melo
Starting with inc, incl, dec, decl. Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-jvh0jspefr5jyn0l7qko12st@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11perf annotate: Resolve symbols using objdump commentArnaldo Carvalho de Melo
This: mov 0x95bbb6(%rip),%ecx # ffffffff81ae8d04 <d_hash_shift> Becomes: mov d_hash_shift,%ecx Ditto for many more instructions that take two operands. Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-i5opbyai2x6mn9e5yjmhx9k6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11perf annotate: Use raw form for register indirect call instructionsArnaldo Carvalho de Melo
callq *0x10(%rax) was being rendered in simplified mode as: callq *10 I.e. hexa, but without the 0x and omitting the register. In such cases just use the raw form. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-m91tv004h2m1fkfgu6ovx3hb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Fixes and improvements for perf/core: - perf_target: abstraction for --uid, --pid, --tid, --cpu, --all-cpus handling, eliminating code duplicated in the tools, having constraints that apply to all of them, from Namhyung Kim - Fixes for handling fallback to cpu-clock on PPC, from David Ahern - Fix for processing events with unknown size, from Jiri Olsa - Compilation fix on 32-bit, from Jiri Olsa Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-10perf hists browser: Use '/' for search/filter instead of 's'Arnaldo Carvalho de Melo
That is what is used in vi and mutt, and as well on the 'annotate' browser. Eventually we can have keymappings to make people used to other key associations more confortable. Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-fyln9286b8gx5q4n277l0djs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
2012-05-09perf annotate: shorten helpline so it fits in visible spaceDavid Ahern
Additional toggles have pushed the help line out of view on a modestly sized terminal (120 columns wide). Shorten it to just reminders. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1336510879-64610-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09perf record: Reset event name when falling back to cpu-clockDavid Ahern
perf-record defaults to the H/W cycles event and if it is not supported falls back to cpu-clock. Reset the event name as well. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1336495811-58461-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09perf top: Update event name when falling back to cpu-clockDavid Ahern
The 'perf top' command falls back to cpu-clock if the H/W cycles event is not supported, but the event name is not updated leading to a misleading header: PerfTop: 8 irqs/sec kernel:75.0% exact: 0.0% [1000Hz cycles], ... Update the event name when the event type is changed so that the header displays correctly: PerfTop: 794 irqs/sec kernel:100.0% exact: 0.0% [1000Hz cpu-clock], ... Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1336495789-58420-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09perf stat: handle ENXIO error for perf_event_openDavid Ahern
perf stat on PPC currently fails to run: $ perf stat -- sleep 1 Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. The problem is that until 2.6.37 (behavior changed with commit b0a873e) perf on PPC returns ENXIO when hw_perf_event_init() fails. With this patch we get the expected behavior: $ perf stat -v -- sleep 1 cycles event is not supported by the kernel. stalled-cycles-frontend event is not supported by the kernel. stalled-cycles-backend event is not supported by the kernel. instructions event is not supported by the kernel. branches event is not supported by the kernel. branch-misses event is not supported by the kernel. ... Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09perf record: Fix fallback to cpu-clock on ppcDavid Ahern
perf-record on PPC is not falling back to cpu-clock: $ perf record -ag -fo /tmp/perf.data -- sleep 1 Error: sys_perf_event_open() syscall returned with 6 (No such device or address). /bin/dmesg may provide additional information. Fatal: No CONFIG_PERF_EVENTS=y kernel support configured? The problem is that until 2.6.37 (behavior changed with commit b0a873e) perf on PPC returns ENXIO when hw_perf_event_init() fails. With this patch we get the expected behavior: $ perf record -ag -fo /tmp/perf.data -v -- sleep 1 Old kernel, cannot exclude guest or host samples. The cycles event is not supported, trying to fall back to cpu-clock-ticks [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.151 MB /tmp/perf.data (~6592 samples) ] Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1336490937-57106-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09perf report: Fix format string for x86-32 compilationJiri Olsa
Using PRIu64 for printing out u64 nr_events to fix compilation for x86 32 bits. Cc: Arun Sharma <asharma@fb.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank C. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1335958638-5160-7-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09sched, perf: Use a single callback into the schedulerPeter Zijlstra
We can easily use a single callback for both sched-in and sched-out. This reduces the code footprint in the scheduler path as well as removes the PMU black spot otherwise present between the out and in callback. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-o56ajxp1edwqg6x9d31wb805@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Fix usage of IBS op current countRobert Richter
The value of IbsOpCurCnt rolls over when it reaches IbsOpMaxCnt. Thus, it is reset to zero by hardware. To get the correct count we need to add the max count to it in case we received an ibs sample (valid bit set). Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-13-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Catch spurious interrupts after stopping IBSRobert Richter
After disabling IBS there could be still incomming NMIs with samples that even have the valid bit cleared. Mark all this NMIs as handled to avoid spurious interrupt messages. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-12-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Implement workaround for IBS erratum #420Robert Richter
When disabling ibs there might be the case where hardware continuously generates interrupts. This is described in erratum #420 (Instruction- Based Sampling Engine May Generate Interrupt that Cannot Be Cleared). To avoid this we must clear the counter mask first and then clear the enable bit. This patch implements this. See Revision Guide for AMD Family 10h Processors, Publication #41322. Note: We now keep track of the last read ibs config value which is then used to disable ibs. To update the config value we pass now a pointer to the functions reading it. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-11-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Extend hw period that triggers overflowRobert Richter
If the last hw period is too short we might hit the irq handler which biases the results. Thus try to have a max last period that triggers the sw overflow. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-10-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Trigger overflow if remaining period is too smallRobert Richter
There are cases where the remaining period is smaller than the minimal possible value. In this case the counter is restarted with the minimal period. This is of no use as the interrupt handler will trigger immediately again and most likely hits itself. This biases the results. So, if the remaining period is within the min range, we better do not restart the counter and instead trigger the overflow. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-9-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Rename some variablesRobert Richter
Simple patch that just renames some variables for better understanding. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-8-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Precise event sampling with IBS for AMD CPUsRobert Richter
This patch adds support for precise event sampling with IBS. There are two counting modes to count either cycles or micro-ops. If the corresponding performance counter events (hw events) are setup with the precise flag set, the request is redirected to the ibs pmu: perf record -a -e cpu-cycles:p ... # use ibs op counting cycle count perf record -a -e r076:p ... # same as -e cpu-cycles:p perf record -a -e r0C1:p ... # use ibs op counting micro-ops Each ibs sample contains a linear address that points to the instruction that was causing the sample to trigger. With ibs we have skid 0. Thus, ibs supports precise levels 1 and 2. Samples are marked with the PERF_EFLAGS_EXACT flag set. In rare cases the rip is invalid when IBS was not able to record the rip correctly. Then the PERF_EFLAGS_EXACT flag is cleared and the rip is taken from pt_regs. V2: * don't drop samples in precise level 2 if rip is invalid, instead support the PERF_EFLAGS_EXACT flag Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120502103309.GP18810@erda.amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Take instruction pointer from ibs sampleRobert Richter
Each IBS sample contains a linear address of the instruction that caused the sample to trigger. This address is more precise than the rip that was taken from the interrupt handler's stack. Update the rip with that address. We use this in the next patch to implement precise-event sampling on AMD systems using IBS. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-6-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Fix frequency profilingRobert Richter
Fixing profiling at a fixed frequency, in this case the freq value and sample period was setup incorrectly. Since sampling periods are adjusted we also allow periods that have lower 4 bits set. Another fix is the setup of the hw counter: If we modify hwc->sample_period, we also need to update hwc->last_period and hwc->period_left. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-5-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Enable ibs op micro-ops counting modeRobert Richter
Allow enabling ibs op micro-ops counting mode. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-4-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf: Pass last sampling period to perf_sample_data_init()Robert Richter
We always need to pass the last sample period to perf_sample_data_init(), otherwise the event distribution will be wrong. Thus, modifiyng the function interface with the required period as argument. So basically a pattern like this: perf_sample_data_init(&data, ~0ULL); data.period = event->hw.last_period; will now be like that: perf_sample_data_init(&data, ~0ULL, event->hw.last_period); Avoids unininitialized data.period and simplifies code. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09perf/x86-ibs: Fix update of periodRobert Richter
The last sw period was not correctly updated on overflow and thus led to wrong distribution of events. We always need to properly initialize data.period in struct perf_sample_data. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-2-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-09Merge branch 'perf/x86-ibs' into perf/coreIngo Molnar
2012-05-08tracing: Remove ftrace_disable/enable_cpu()Steven Rostedt
The ftrace_disable_cpu() and ftrace_enable_cpu() functions were needed back before the ring buffer was lockless. Now that the ring buffer is lockless (and has been for some time), these functions serve no purpose, and unnecessarily slow down operations of the tracer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-08tracing: Use seq_*_private interface for some seq filesJiri Olsa
It's appropriate to use __seq_open_private interface to open some of trace seq files, because it covers all steps we are duplicating in tracing code - zallocating the iterator and setting it as seq_file's private. Using this for following files: trace available_filter_functions enabled_functions Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> [ Fixed warnings for: kernel/trace/trace.c: In function '__tracing_open': kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable] kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable] ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-08Merge branch 'perf/annotate' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Perf annotate browser improvements: - Get back the line separating the overheads from the disassembly, requested by Peter Zijlstra, Linus agreed now that it is a solid line and more column real state was harvested. Also it has the jump->arrow lines separated from it by the address/jump target column. - Don't change asm line color when toggling source code view. Requested by Peter Zijlstra. Current snapshot: avtab_search_node │ push %rbp │ mov %rsp,%rbp │ → callq mcount │ movzwl 0x6(%rsi),%edx │ and $0x7fff,%dx │ test %rdi,%rdi │ ↓ jne 20 0.42 │17:┌─→xor %eax,%eax │19:│ leaveq 0.42 │ │← retq │ │ nopl 0x0(%rax,%rax,1) │20:│ mov (%rdi),%rax 0.08 │ │ test %rax,%rax │ └──je 17 │ movzwl (%rsi),%ecx │ movzwl 0x2(%rsi),%r9d │ movzwl 0x4(%rsi),%r8d │ movzwl %cx,%esi │ movzwl %r9w,%r10d │ shl $0x9,%esi │ lea (%rsi,%r10,4),%esi │ lea (%r8,%rsi,1),%esi │ and 0x10(%rdi),%si │ movzwl %si,%esi │ mov (%rax,%rsi,8),%rax 1.01 │ test %rax,%rax │ ↑ je 19 │ nopw 0x0(%rax,%rax,1) 3.19 │60: cmp %cx,(%rax) │ ↓ jne 7e 0.08 │ cmp %r9w,0x2(%rax) │ ↓ jne 7e │ cmp %r8w,0x4(%rax) │ ↓ jne 79 │ test %dx,0x6(%rax) │ ↑ jne 19 │79: cmp %r8w,0x4(%rax) 83.45 │7e: ↑ ja 17 3.36 │ mov 0x10(%rax),%rax 7.98 │ test %rax,%rax │ ↑ jne 60 │ leaveq │ ← retq Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08perf top: Default to system wide using perf_target methodsArnaldo Carvalho de Melo
Additionally we were not checking if a cpu list had been provided by the user. Fix that. Reported-by: David Ahern <dsahern@gmail.com> Reported-by: Namhyung Kim <namhyung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ao3zrouylwmt7h9ikj0krubi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-08tracing: Prevent wasting time evaluating parameters in trace_preempt_on/offMinho Ban
This fixes spending time for evaluating parameters in trace_preempt_on/off when the tracer config is off. The patch mainly inspired by Steven Rostedt, thanks Steven. Link: http://lkml.kernel.org/r/4FA73510.7070705@samsung.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Minho Ban <mhban@samsung.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-07perf annotate browser: Compact 'nop' outputArnaldo Carvalho de Melo
Just suppress the nop operands, future infrastructure that will record the instruction lenght (and its contents) in struct ins will allow rendering them as nopN, i.e. nop5 for a 5-byte nop. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qddbeglfzqdlal8vj2yaj67y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf annotate browser: Do raw printing in 'o'ffset in a single placeArnaldo Carvalho de Melo
Instead of doing the same in all ins scnprintf methods. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-8mfairi2n1nentoa852alazv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf stat: Use perf_evlist__create_mapsNamhyung Kim
Use same function with perf record and top to share the code checks combinations of different switches. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-8-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf target: Consolidate target task/cpu checkingNamhyung Kim
There are places that check whether target task/cpu is given or not and some of them didn't check newly introduced uid or cpu list. Add and use three of helper functions to treat them properly. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-7-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf tools: Introduce perf_target__strerror()Namhyung Kim
The perf_target__strerror() sets @buf to a string that describes the (perf_target-specific) error condition that is passed via @errnum. This is similar to strerror_r() and does same thing if @errnum has a standard errno value. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-6-git-send-email-namhyung.kim@lge.com [ committer note: No need to use PERF_ERRNO_TARGET__SUCCESS, use shorter idiom ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf target: Introduce perf_target__parse_uid()Namhyung Kim
Add and use the modern perf_target__parse_uid() and get rid of the old parse_target_uid(). Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-5-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf target: Introduce perf_target_errnoNamhyung Kim
The perf_target_errno enumerations are used to indicate specific error cases on perf target operations. It'd help libperf being a more generic library. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-4-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07perf evlist: Fix creation of cpu mapNamhyung Kim
Currently, 'perf record -- sleep 1' creates a cpu map for all online cpus since it turns out calling cpu_map__new(NULL). Fix it. Also it is guaranteed that cpu_list is NULL if PID/TID is given by calling perf_target__validate(), so we can make the conditional bit simpler. This also fixes perf test 7 (Validate) failure on my 6 core machine: $ cat /sys/devices/system/cpu/online 0-11 $ ./perf test -v 7 7: Validate PERF_RECORD_* events & perf_sample fields: --- start --- perf_evlist__mmap: Operation not permitted ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: FAILED! Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1336367344-28071-3-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-26 11:48:49 +0000