summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-26V4L/DVB (8483): Remove obsolete owner field from video_device struct.Hans Verkuil
According to an old comment this should have been removed in 2.6.15. Better late than never... Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8482): videodev: move all ioctl callbacks to a new v4l2_ioctl_ops ↵Hans Verkuil
struct All ioctl callbacks are now stored in a new v4l2_ioctl_ops struct. Drivers fill in a const struct v4l2_ioctl_ops and video_device just contains a const pointer to it. This ensures a clean separation between the const ops struct and the non-const video_device struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8479): tveeprom/ivtv: fix usage of has_ir fieldHans Verkuil
has_ir was set to and compared to -1 in several cases, even though it is an u32. ivtv also contained a FIXME for an old kernel that could be removed. Thanks to Roel Kluin for creating an initial patch for this. Although I chose a different solution here it did help in pointing out the problem. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8477): v4l: remove obsolete audiochip.hHans Verkuil
Converted the last users of audiochip.h to the v4l2-chip-ident.h header and remove the now unused audiochip.h header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8475): pvrusb2: Cosmetic macro fix (benign)Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8474): pvrusb2: Enable IR chip on HVR-1900 class devicesMike Isely
The Zilog IR chip on HVR-1900 devices is held in reset when the device initializes. We have to bring this chip out of reset before LIRC has any chance of operating the chip. So do it. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8472): cx23885: SRAM changes for the 885 and 887 silicon parts.Steven Toth
In a previous patch I merged both memory maps into a single struct, believing that they could be combined. We've since found problems with streaming multiple channels on the 885. I'm restoring the multiple memory map structs - in line with the windows driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8471): cx23885: Reallocated the sram to avoid concurrent VIDB/C issues.Steven Toth
This may be cx23885 chip specific and may not work on the cx23887. Analog and mpeg encoder streaming are still to be tested. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8470): cx23885: Add DViCO HDTV7 Dual Express tuner callback support.Steven Toth
Ensure the correct tuner gets reset on demand. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8469): cx23885: FusionHDTV7 Dual Express toggle reset.Steven Toth
Ensure the tuners and demods are brought in and out of reset during driver startup. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8468): cx23885: Ensure the second transport port is enabled for ↵Steven Toth
streaming. It was previously disabled pending a bugfix, which has since been resolved. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8467): cx23885: Minor cleanup to the debuging output for a specific ↵Steven Toth
register. Don't display the register when it's not appropriate for the specific port. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8466): cx23885: Bugfix - DVB Transport cards using DVB port ↵Steven Toth
VIDB/TS1 did not stream. Certain DVB cards that have demodulators on TS1/VIDB were not streaming packets. This ensure the pin directions on PAD_CTRL are set correctly, solving the issue. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8465): cx23885: Ensure PAD_CTRL is always reset to a sensible defaultSteven Toth
PAD_CTRL controls TS1 and TS2 input and output states, if the register became corrupt the driver was never able to recover. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8464): cx23885: Bugfix for concurrent use of /dev/video0 and ↵Steven Toth
/dev/video1 With the HVR1800, trying to use video0 and video1 simultaneously caused buffer corruption in the PCIe bridge. This fix reallocates video1 buffer locations to avoid the issue. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8462): cx18: Lock the aux PLL to the video pixle rate for analog ↵Andy Walls
captures cx18: Lock the aux PLL to the video pixel rate for analog captures. The datasheet for the CX25840 says this is important for MPEG encoding applications. To ensure the PLL locking was correct, also fixed the aux PLL's multiplier to be computed based on a precise crystal freq of 4.5 MHz/286 * 455/2 * 8 = 28636363.6363... instead of the imporperly rounded 28636363. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8461): cx18: Fix 32 kHz audio sample output rate for analog tuner ↵Andy Walls
SIF input cx18: Fix 32 kHz audio sample output rate for analog tuner SIF input so it works. The AUX_PLL VCO was being operated at 196.6 MHz out of the spec'ed 200-600 MHz range. Fixed the multipler and post dividers to operate the VCO within specification and added comments on how magic numbers are derived. Thanks to Hans Verkuil for pointing out this interesting problem to solve. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8458): gspca_sonixb remove one more no longer needed special case ↵Hans de Goede
from the code gspca_sonixb remove one more no longer needed special case from the code Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8457): gspca_sonixb remove some no longer needed sn9c103+ov7630 ↵Andoni Zubimendi
special cases gspca_sonixb remove some no longer needed sn9c103+ov7630 special cases Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8456): gspca_sonixb remove non working ovXXXX contrast, hue and ↵Hans de Goede
saturation ctrls gspca_sonixb remove non working ovXXXX contrast, hue and saturation ctrls Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8455): gspca_sonixb sn9c103 + ov7630 autoexposure and cleanupHans de Goede
Andoni Zubimendi has been doing some testing with his sn9c103 cam with ov7630 sensor, and with this patch the exposure setting and autoexposure now work. This patch also removes some special cases in the shared ov6650 / ov7630 code which now are handled the same for both sensors and it adds a new special case which stops us from changing the hsync / vsync polarity settings from their default on the ov7630 (which we were doing as a side-effect of using the ov6650 exposure code for the ov7630). Last this patch removes the superficial difference between the OV7630 and OV7630_3 sensors. Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8453): sms1xxx: dvb/siano/: cleanupsAdrian Bunk
This patch contains the following cleanups: - mark smscore_module_init() as __init - mark smscore_module_exit as __exit - make the following needlessly global code static: - smscoreapi.c: struct g_smscore_notifyees - smscoreapi.c: struct g_smscore_devices - smscoreapi.c: struct g_smscore_deviceslock - smscoreapi.c: struct g_smscore_registry - smscoreapi.c: struct g_smscore_registrylock - smscoreapi.c: smscore_module_init() - smscoreapi.c: smscore_module_exit() - smsdvb.c: struct g_smsdvb_clients - smsdvb.c: struct g_smsdvb_clientslock Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-25V4L/DVB (8451): dw2102: fix in-kernel compilationMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-24Merge ../linux-2.6Mauro Carvalho Chehab
2008-07-24V4L/DVB (8234a): uvcvideo: Fix build for uvc inputMauro Carvalho Chehab
Fix a bug introduced by some trouble on my -git tree that resulted on a hunk to be lost (probably caused by some rebase). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23Merge branch 'x86/auditsc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: i386 syscall audit fast-path x86_64 ia32 syscall audit fast-path x86_64 syscall audit fast-path x86_64: remove bogus optimization in sysret_signal
2008-07-23Merge branch 'sched/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: hrtick_enabled() should use cpu_active() sched, x86: clean up hrtick implementation sched: fix build error, provide partition_sched_domains() unconditionally sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed cpu hotplug: Make cpu_active_map synchronization dependency clear cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) sched: rework of "prioritize non-migratable tasks over migratable ones" sched: reduce stack size in isolated_cpu_setup() Revert parts of "ftrace: do not trace scheduler functions" Fixed up conflicts in include/asm-x86/thread_info.h (due to the TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr() introduction).
2008-07-23Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) NR_CPUS: Replace NR_CPUS in speedstep-centrino.c cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP NR_CPUS: Replace NR_CPUS in cpufreq userspace routines NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target cpumask: Provide a generic set of CPUMASK_ALLOC macros cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr Revert "cpumask: introduce new APIs" cpumask: make for_each_cpu_mask a bit smaller net: Pass reference to cpumask variable in net/sunrpc/svc.c ... Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23Merge branch 'core/softlockup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: fix invalid proc_handler for softlockup_panic softlockup: fix watchdog task wakeup frequency softlockup: fix watchdog task wakeup frequency softlockup: show irqtrace softlockup: print a module list on being stuck softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds softlockup: fix softlockup_thresh fix softlockup: fix softlockup_thresh unaligned access and disable detection at runtime softlockup: allow panic on lockup
2008-07-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-23i386 syscall audit fast-pathRoland McGrath
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23x86_64 ia32 syscall audit fast-pathRoland McGrath
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23x86_64 syscall audit fast-pathRoland McGrath
This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23x86_64: remove bogus optimization in sysret_signalRoland McGrath
This short-circuit path in sysret_signal looks wrong to me. AFAICT, in practice the branch is never taken--and if it were, it would go wrong. To wit, try loading a module whose init function does set_thread_flag(TIF_IRET), and see insmod crash (presumably with a wrong user stack pointer). This is because the FIXUP_TOP_OF_STACK work hasn't been done yet when we jump around the call to ptregscall_common and get to int_with_check--where it expects the user RSP,SS,CS and EFLAGS to have been stored by FIXUP_TOP_OF_STACK. I don't think it's normally possible to get to sysret_signal with no _TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are already superfluous. If it ever did happen, it is harmless to call do_notify_resume with nothing for it to do. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23V4L/DVB (8442): gspca: Remove the version from the subdrivers.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8441): gspca: Bad handling of start of frames in sonixj.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8440): gspca: Makes some needlessly global functions static.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8438): gspca: Lack of matrix for zc3xx - tas5130c (vf0250).Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8436): gspca: Version number only in the main driver.Jean-Francois Moine
The version numbers of the subrivers will be removed as these ones will be changed for any other purpose. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8435): gspca: Delay after reset for ov7660 and USB traces in sonixj.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8434): Fix x86_64 compilation and move some macros to v4l2-ioctl.hMauro Carvalho Chehab
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to ↵Hans Verkuil
v4l2-common.h or v4l2-ioctl.h The functions in a header should not belong to another module. The prio functions belong to v4l2-common.c, so move them to v4l2-common.h. The ioctl functions belong to v4l2-ioctl.c, so create a new v4l2-ioctl.h header and move those functions to it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8433): Fix macro name at z0194a.hMauro Carvalho Chehab
As reported by Hans Verkuil: In file included from /home/v4l/master/v4l/dw2102.c:14: /home/v4l/master/v4l/z0194a.h:93: error: 'STV0229_LOCKOUTPUT_1' undeclared here (not in a function) This is due to some typos that were fixed on stv0299. This patch renames it in accord with that fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8429): videodev: renamed 'class_dev' to 'dev'Hans Verkuil
The class_dev field is a normal device, not a class device. This is very confusing and now that the old 'dev' field has been renamed to 'parent' we can rename 'class_dev' to just 'dev'. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8428): videodev: rename 'dev' to 'parent'Hans Verkuil
The field 'dev' is not the video device, but the parent of the video device. Rename accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8427): videodev: split off the ioctl handling into v4l2-ioctl.cHans Verkuil
videodev.c became top-heavy so all the ioctl processing has been split off into v4l2-ioctl.c. This means videodev.c is back to its original purpose: creating and registering v4l devices. Since videodev.c and v4l2-ioctl.c should still remain one module (as least for now) I also had to rename videodev.c to v4l2-dev.c to prevent a circular dependency when building a videodev.ko module. This is not a bad thing, since the source and header now have the same name. And the v4l2- prefix is useful to see which sources are generic v4l2 support code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: highmem capable PIO routines sg: reimplement sg mapping iterator mmc_test: print message when attaching to card mmc: Remove Russell as primecell mci maintainer mmc_block: bounce buffer highmem support sdhci: fix bad warning from commit c8b3e02 sdhci: add warnings for bad buffers in ADMA path mmc_test: test oversized sg lists mmc_test: highmem tests s3cmci: ensure host stopped on machine shutdown au1xmmc: suspend/resume implementation s3cmci: fixes for section mismatch warnings pxamci: trivial fix of DMA alignment register bit clearing
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits) I/OAT: I/OAT version 3.0 support I/OAT: tcp_dma_copybreak default value dependent on I/OAT version I/OAT: Add watchdog/reset functionality to ioatdma iop_adma: cleanup iop_chan_xor_slot_count iop_adma: document how to calculate the minimum descriptor pool size iop_adma: directly reclaim descriptors on allocation failure async_tx: make async_tx_test_ack a boolean routine async_tx: remove depend_tx from async_tx_sync_epilog async_tx: export async_tx_quiesce async_tx: fix handling of the "out of descriptor" condition in async_xor async_tx: ensure the xor destination buffer remains dma-mapped async_tx: list_for_each_entry_rcu() cleanup dmaengine: Driver for the Synopsys DesignWare DMA controller dmaengine: Add slave DMA interface dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap dmaengine: Add dma_client parameter to device_alloc_chan_resources dmatest: Simple DMA memcpy test client dmaengine: DMA engine driver for Marvell XOR engine iop-adma: fix platform driver hotplug/coldplug dmaengine: track the number of clients using a channel ... Fixed up conflict in drivers/dca/dca-sysfs.c manually
2008-07-23Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: kgdboc console poll hooks for mpsc uart kgdb: kgdboc console poll hooks for cpm uart kgdb, powerpc: arch specific powerpc kgdb support kgdb: support for ARCH=arm kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable
2008-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (60 commits) ide: small whitespace fixes ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings ide: ide-cd.c fix sparse endianness warnings ide-cd: convert to using the new atapi_flags ide: remove unused PC_FLAG_DRQ_INTERRUPT ide-scsi: convert to using the new atapi_flags ide-tape: convert to using the new atapi_flags ide-floppy: convert to using the new atapi_flags (take 2) ide: add per-device flags ide: use rq->cmd instead of pc->c in atapi common code ide-scsi: pass packet command in rq->cmd ide-tape: pass packet command in rq->cmd ide-tape: make room for packet command ids in rq->cmd ide-floppy: pass packet command in rq->cmd ide: remove pc->callback member from ide_atapi_pc ide-scsi: use drive->pc_callback instead of pc->callback ide-tape: use drive->pc_callback instead of pc->callback ide-floppy: use drive->pc_callback instead of pc->callback ide: push pc callback pointer into the ide_drive_t structure drivers/ide/ide-tape.c: remove double kfree ...
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-29 00:39:41 +0000