summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-14llc: Fix races between llc2 handler use and (un)registrationBen Hutchings
When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Call llc_station_exit() on llc2_init() failure pathBen Hutchings
Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Fix silent failure of llc_station_init()Ben Hutchings
llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: ipv6: proc: Fix error handlingIgor Maravic
Fix error handling in case making of dir dev_snmp6 failes Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14ipv4: Cache local output routesYan, Zheng
Commit caacf05e5ad1abf causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: sierra_net: replace whitelist with ifnumber matchBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: compress device_id list using macrosBjørn Mork
Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: add Sierra Wireless devicesBjørn Mork
Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: use fixed interface number matchingBjørn Mork
This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole.txt: revision of examples for the receiver of kernel messagesDirk Gouders
There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: re-enable irq in poll_napi()Amerigo Wang
napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: handle vlan tags in netpoll tx and rx pathAmerigo Wang
Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up vlan_dev_hard_start_xmit()Amerigo Wang
Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up some variable namesAmerigo Wang
To be consistent, s/info/vlan/. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: convert several functions to boolAmerigo Wang
These functions are just boolean, let them return bool instead of int. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: check netpoll tx status on the right deviceAmerigo Wang
Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: use list_for_each_entry() in netpoll functionsAmerigo Wang
We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: add some comments for NETDEV_RELEASEAmerigo Wang
Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()Amerigo Wang
This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use netpoll_rx_on() in netpoll_rx()Amerigo Wang
The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_rx()Amerigo Wang
In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole: do not release spin_lock when calling __netpoll_cleanupAmerigo Wang
With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: make __netpoll_cleanup non-blockAmerigo Wang
Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex Deucher writes: This is the current set of radeon fixes for 3.6. Nothing too major. Highlights: - various display fixes - some SI fixes - new SI pci ids - major VM fix - CS checker support for MSAA I've tested on a number of cards across generations and noticed no problems. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: add MSAA texture support for r600-evergreenMarek Olšák
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: reorder code in r600_check_texture_resourceMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fence virtual address and free it once idle v4Jerome Glisse
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix some missing parens in asic macrosAlex Deucher
Better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: add some new SI pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix ordering in pll picking on dce4+Alex Deucher
No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse
It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix bank tiling parameters on caymanAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on evergreenAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on SIChristian König
The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König <deathsimple@vodafone.de> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: properly handle crtc powergatingAlex Deucher
Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: properly handle SS overrides on TN (v2)Alex Deucher
The IntegratedSystemInfo table changed versions on TN. Update the SS override lookup to handle it. v2: fix copy-paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/dce4+: set a more reasonable cursor watermarkAlex Deucher
Set a more reasonable default cursor watermark. The recommended default value is 4. This should reduce urgency requests to the MC form the display hw. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix handling for ddc type 5 on combiosAlex Deucher
When ddc type is 5, need to look up the i2c channel in the i2c table. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull leds fixes/revert from Bryan Wu. * 'fixes-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: renesas: fix error handling Revert "leds: use led_set_brightness in led_trigger_event" leds: lp8788: Fix updating scale configuration bits
2012-08-13leds: renesas: fix error handlingArnd Bergmann
bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path" introduced a possible case in which r_tpu_probe calls iounmap on a wild pointer. This changes the one case that was missed in the same way as the other error paths. Without this patch, building kota2_defconfig results in: drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe': drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Revert "leds: use led_set_brightness in led_trigger_event"Fabio Baltieri
This reverts commit a0193cbee0809d65362a0767b2d50306b145b2f5. The problem with the original commit was that it caused a warning with the MMC trigger calling del_timer_sync from hard-irq context. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "Most importantly this should cure the ipv4-mapped ipv6 socket TCP crashes some people were seeing, otherwise: 1) Fix e1000e autonegotiation handling regression, from Tushar Dave. 2) Fix TX data corruption race on e1000e down, also from Tushar Dave. 3) Fix bfin_sir IRDA driver build, from Sonic Zhang. 4) AF_PACKET mmap() tests a flag in the TX ring shared between userspace and the kernel for an internal consistency check. It really shouldn't do this to validate the kernel's own behavior because the user can corrupt it to be any value at all. From Daniel Borkmann. 5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet. 6) Orphan the anonymous TCP socket from the SKB in ip_send_unicast_reply() so that the rest of the stack needn't see it. Otherwise we get selinux problems of all sorts, from Eric Dumazet. This is the best way to fix this since the socket is just a place holder for sending packets in a context where we have no real socket at all. 7) Fix TUN detach crashes, from Stanislav Kinsbursky. 8) dev_set_alias() leaks memory on krealloc() failure, from Alexey Khoroshilov. 9) FIB trie must use call_rcu() not call_rcu_bh(), because this code is not universally invoked from software interrupts. From Eric Dumazet. 10) PPTP looks up ipv4 routes with the wrong network namespace, fix from Gao Feng." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) bnx2x: Fix compiler warnings af_packet: remove BUG statement in tpacket_destruct_skb macvtap: rcu_dereference outside read-lock section codel: refine one condition to avoid a nul rec_inv_sqrt ixgbe: add missing braces ipv4: fix ip_send_skb() net: tcp: ipv6_mapped needs sk_rx_dst_set method ipv4: tcp: unicast_sock should not land outside of TCP stack bnx2x: Fix recovery flow cleanup during probe bnx2x: fix unload previous driver flow when flr-capable tun: don't zeroize sock->file on detach igb: Fix register defines for all non-82575 hardware e1000e: fix panic while dumping packets on Tx hang with IOMMU igb: fix panic while dumping packets on Tx hang with IOMMU tcp: must free metrics at net dismantle net/stmmac: mark probe function as __devinit lpc_eth: remove obsolete ifdefs net/core: Fix potential memory leak in dev_set_alias() cdc-phonet: Don't leak in usbpn_open batman-adv: Fix mem leak in the batadv_tt_local_event() function ...
2012-08-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull tcm_vhost level target fabric driver from Nicholas Bellinger: "Here is the PULL request for the initial merge of tcm_vhost based on RFC-v5 code with MST's ACK appended to the initial merge commit." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_vhost: Initial merge for vhost level target fabric driver
2012-08-12bnx2x: Fix compiler warningsJoren Van Onder
Fix the following compiler warnings: - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Joren Van Onder <joren.vanonder@gmail.com> Acked-By: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-28 09:46:05 +0000