summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-07skge: convert to hw_featuresMichał Mirosław
just IP_CSUM. This needs testing and so is not changed here. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: call FLR after setup wol in be_shutdownAjit Khaparde
Calling setup_wol after a reset is inconsequential. The WOL setting should be programmed before FLR. And yes, FLR does not erase wol information. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: dynamically allocate adapter->vf_cfgAjit Khaparde
Instead of a fixed sized array for vf_cfg, allocate the size dynamically depending on number of VFs the device supports. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: fix to get max VFs supported from adapterAjit Khaparde
The user supplied num_vfs value need not be compared against a static BE_MAX_VF, but can be checked against the actual VFs that the device can support. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: use common method to check for sriov function typeAjit Khaparde
Lancer and BE can both use SLI_INTF_REG to check a VF or a PF. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: add rxhash supportAjit Khaparde
Add rxhash support, Based on initial work by Eric Dumazet. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_main.c
2011-04-07ipv4: Fix "Set rt->rt_iif more sanely on output routes."OGAWA Hirofumi
Commit 1018b5c01636c7c6bda31a719bda34fc631db29a ("Set rt->rt_iif more sanely on output routes.") breaks rt_is_{output,input}_route. This became the cause to return "IP_PKTINFO's ->ipi_ifindex == 0". To fix it, this does: 1) Add "int rt_route_iif;" to struct rtable 2) For input routes, always set rt_route_iif to same value as rt_iif 3) For output routes, always set rt_route_iif to zero. Set rt_iif as it is done currently. 4) Change rt_is_{output,input}_route() to test rt_route_iif Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06net: fix skb_add_data_nocache() to calc csum correctlyWei Yongjun
commit c6e1a0d12ca7b4f22c58e55a16beacfb7d3d8462 broken the calc (net: Allow no-cache copy from user on transmit) of checksum, which may cause some tcp packets be dropped because incorrect checksum. ssh does not work under today's net-next-2.6 tree. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06ewrk3: convert to set_phys_idstephen hemminger
Use ethtool infrastructure for blinking, which is now does locking at higher level. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: convert to set_phys_idstephen hemminger
Convert driver to use new ethtool set_phys_id. Not completely sure that this is correct for all cases of device up/down and doing operation. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06net: netxen: convert to hw_featuresMichał Mirosław
Rather simple conversion to hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06capi: Perform scheduled capifs removalJan Kiszka
udev fully replaces this special file system that only contains CAPI NCCI TTY device nodes. User space (pppdcapiplugin) works without noticing the difference. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Signed bit field; int have_hotplug_status_watch:1Ian Campbell
Fixes error from sparse: CHECK drivers/net/xen-netback/xenbus.c drivers/net/xen-netback/xenbus.c:29:40: error: dubious one-bit signed bitfield int have_hotplug_status_watch:1; Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06MAINTAINERS: add entry for Xen network backendIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Fix suspend/resume operationPadmanabh Ratnakar
eq_next_idx is not getting reset to zero during suspend. This causes resume to fail. Added the fix. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Rename some struct members for clarityPadmanabh Ratnakar
Renamed msix_vec_idx to eq_idx in be_eq_obj struct. Renamed msix_vec_next_idx to eq_next_idx in be_adapter structure. These members are used in INTX mode also. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06s2io: convert to set_phys_id (v2)stephen hemminger
Convert to new ethtool set physical id model. Remove no longer used timer, and fix docbook comment. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06niu: convert to new ethtool set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06pcnet32: convert to set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06benet: convert to set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2x: convert to set_phys_idstephen hemminger
Also cleanup error codes to no lie about things that driver doesn't support. If device is down report -EAGAIN (same as Broadcom), and if port doesn't blink then error as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2: convert to set_phys_idstephen hemminger
In this case, need to add element to device private to hold original led state. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06vxge: convert to set_phys_idstephen hemminger
Also fix up incorrect docbook comment Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06cxgb3: implement set_phys_idstephen hemminger
Implement new ethtool set_phys_id on Chelsio cxgb3 board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: implement ethtool set_phys_idstephen hemminger
Implement control of LED via set_phys_id. Note: since PHY is powered off if device is down, this board only allows blinking if device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06skge: implement set_phys_idstephen hemminger
Implement set_phys_id led control on SysKonnect board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06sky2: support ethtool set_phys_idstephen hemminger
Use ethtool set_phys_id to control LED. Fixes issues with RTNL being held for extended periods. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_devUlrich Weber
otherwise we loop forever if a PPPoE socket was set to PPPOX_ZOMBIE state by a PADT message when the ethernet device is going down afterwards. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-06dsa/mv88e6131: add support for mv88e6085 switchPeter Korsgaard
The mv88e6085 is identical to the mv88e6095, except that all ports are 10/100 Mb/s, so use the existing setup code except for the cpu/dsa speed selection in _setup_port(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)Neil Horman
properly record sk_rxhash in ipv6 sockets (v2) Noticed while working on another project that flows to sockets which I had open on a test systems weren't getting steered properly when I had RFS enabled. Looking more closely I found that: 1) The affected sockets were all ipv6 2) They weren't getting steered because sk->sk_rxhash was never set from the incomming skbs on that socket. This was occuring because there are several points in the IPv4 tcp and udp code which save the rxhash value when a new connection is established. Those calls to sock_rps_save_rxhash were never added to the corresponding ipv6 code paths. This patch adds those calls. Tested by myself to properly enable RFS functionalty on ipv6. Change notes: v2: Filtered UDP to only arm RFS on bound sockets (Eric Dumazet) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Update version number to 5.0.16Anirban Chakraborty
Bumped up version number to 5.0.16 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Fix LRO disableRajesh Borundia
o In dev->open LRO was enabled by default, enable it depending upon netdev->features , kernel may have disabled it. o Configure LRO when interface is up. Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Use flt method to determine flash fw regionSritej Velaga
Use flash layout table to get flash fw starting address and its size. If that fails, use legacy method. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Remove unused codeAnirban Chakraborty
Cleaned up unused codes for interrupt coalescence settings Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Changes to VLAN codeAnirban Chakraborty
Made changes to VLAN code comply with new VLAN infrastructure in kernel Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Code optimization patchAnirban Chakraborty
Optimized code resulted in achieving lower CPU utilization on transmit path and higher throughput for small packet sizes (64 bytes). Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Cleanup patchAnirban Chakraborty
1. Changed adapter structure to move away from embedding hardware and receive context structs and use pointers to those objects 2. Packed all the structs that interface with FW 3. Removed unused code and structs Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Memory leak fixSony Chacko
Fix a memory leak in error path of pci info. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Make PCI info available in all modesSony Chacko
Before this fix, PCI info was available only when multiple NIC functions are present on the same port. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Fix a potential crash during shutdown.Ajit Khaparde
adapter could remain uninitialized if probe fails for some reason. A null pointer access could cause a crash if be_shutdown is called after that. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bna: Fix for handling firmware heartbeat failureRasesh Mody
This patch contains a fix for gracefully handling firmware heartbeat failure instead of forcing panic. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06can: convert protocol handling to RCUOliver Hartkopp
This patch removes spin_locks at CAN socket creation time by using RCU. Inspired by the discussion with Kurt van Dijck and Eric Dumazet the RCU code was partly derived from af_phonet.c Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-04-06can: mcp251x: Allow pass IRQ flags through platform data.Enric Balletbo i Serra
When an interrupt occurs, the INT pin is driven low by the MCP251x controller (falling edge) but in some cases the INT pin can be connected to the MPU through a transistor or level translator which inverts this signal. In this case interrupt should be configured in rising edge. This patch adds support to pass the IRQ flags via mcp251x_platform_data. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06smsc911x: fix mac_lock acquision before calling smsc911x_mac_readEnric Balletbo i Serra
When SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls smsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock spinlock This patch fixes following warning smsc911x: Driver version 2008-10-21. ------------[ cut here ]------------ WARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220() Modules linked in: [<c0060858>] (unwind_backtrace+0x0/0xe0) from [<c009322c>] (warn_slowpath_common+0x4c/0x64) [<c009322c>] (warn_slowpath_common+0x4c/0x64) from [<c009325c>] (warn_slowpath_null+0x18/0x1c) [<c009325c>] (warn_slowpath_null+0x18/0x1c) from [<c0324bec>] (smsc911x_mac_read+0x24/0x220) [<c0324bec>] (smsc911x_mac_read+0x24/0x220) from [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) from [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) from [<c02d3e54>] (platform_drv_probe+0x14/0x18) [<c02d3e54>] (platform_drv_probe+0x14/0x18) from [<c02d2d60>] (driver_probe_device+0xc8/0x184) [<c02d2d60>] (driver_probe_device+0xc8/0x184) from [<c02d2e84>] (__driver_attach+0x68/0x8c) [<c02d2e84>] (__driver_attach+0x68/0x8c) from [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) from [<c02d2660>] (bus_add_driver+0x9c/0x228) [<c02d2660>] (bus_add_driver+0x9c/0x228) from [<c02d3598>] (driver_register+0xa0/0x124) [<c02d3598>] (driver_register+0xa0/0x124) from [<c0050668>] (do_one_initcall+0x94/0x168) [<c0050668>] (do_one_initcall+0x94/0x168) from [<c0008984>] (kernel_init+0xa0/0x154) [<c0008984>] (kernel_init+0xa0/0x154) from [<c005afac>] (kernel_thread_exit+0x0/0x8) ---[ end trace 2c931a35b7885770 ]--- Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Support 4mb flash sizes for 5717 and 5719Matt Carlson
If a 5717 or 5719 NVRAM part is manually strapped and is 2mb in size, the driver needs to look at the NVRAM size field rather than infer it from the strapping itself. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Enable 5720 supportMatt Carlson
This patch adds the 5720 device ID to the PCI table, thus enabling 5720 support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 PHY IDMatt Carlson
This patch adds the 5720 PHY ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-16 01:56:18 +0000