summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net/mlx4_en: remove NETDEV_TX_BUSYEric Dumazet
Drivers should avoid NETDEV_TX_BUSY as much as possible. They should stop the tx queue before qdisc even tries to push another packet, to avoid requeues. For a driver supporting skb->xmit_more, this is likely to be a prereq anyway, otherwise we could have a tx deadlock : We need to force a doorbell if TX ring is full. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: bcmgenet: fix Tx ring priority programmingPetri Gynther
GENET MAC has three Tx ring priority registers: - GENET_x_TDMA_PRIORITY0 for queues 0-5 - GENET_x_TDMA_PRIORITY1 for queues 6-11 - GENET_x_TDMA_PRIORITY2 for queues 12-16 Fix bcmgenet_init_multiq() to program them correctly. Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: phy: adjust fixed_phy_register() return valuePetri Gynther
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net_sched: fix unused variables in __gnet_stats_copy_basic_cpu()WANG Cong
Probably not a big deal, but we'd better just use the one we get in retry loop. Fixes: commit 22e0f8b9322cb1a48b1357e8 ("net: sched: make bstats per cpu and estimator RCU safe") Reported-by: Joe Perches <joe@perches.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07openvswitch: fix a compilation error when CONFIG_INET is not setW!Andy Zhou
Fix a openvswitch compilation error when CONFIG_INET is not set: ===================================================== In file included from include/net/geneve.h:4:0, from net/openvswitch/flow_netlink.c:45: include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads': >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration] >> return iptunnel_handle_offloads(skb, udp_csum, type); >> ^ >> >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast >> >> cc1: some warnings being treated as errors ===================================================== Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07openvswitch: fix a sparse warningAndy Zhou
Fix a sparse warning introduced by commit: f5796684069e0c71c65bce6a6d4766114aec1396 (openvswitch: Add support for Geneve tunneling.) caught by kbuild test robot: reproduce: # apt-get install sparse # git checkout f5796684069e0c71c65bce6a6d4766114aec1396 # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/openvswitch/vport-geneve.c:109:15: sparse: incorrect type in assignment (different base types) # net/openvswitch/vport-geneve.c:109:15: expected restricted __be16 [usertype] sport # net/openvswitch/vport-geneve.c:109:15: got int # >> net/openvswitch/vport-geneve.c:110:56: sparse: incorrect type in argument 3 (different base types) # net/openvswitch/vport-geneve.c:110:56: expected unsigned short [unsigned] [usertype] value # net/openvswitch/vport-geneve.c:110:56: got restricted __be16 [usertype] sport Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: fix a sparse warningAndy Zhou
Fix a sparse warning introduced by Commit 0b5e8b8eeae40bae6ad7c7e91c97c3c0d0e57882 (net: Add Geneve tunneling protocol driver) caught by kbuild test robot: # apt-get install sparse # git checkout 0b5e8b8eeae40bae6ad7c7e91c97c3c0d0e57882 # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/ipv4/geneve.c:230:42: sparse: incorrect type in assignment (different base types) # net/ipv4/geneve.c:230:42: expected restricted __be32 [addressable] [assigned] [usertype] s_addr # net/ipv4/geneve.c:230:42: got unsigned long [unsigned] <noident> # Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07Merge branch 'ipv6-next'David S. Miller
Hannes Frederic Sowa says: ==================== ipv6: cleanup after rt6_genid removal Leftover patches after rt6_genid removal after 705f1c869d577c ("ipv6: remove rt6i_genid"). Major two changes are: * keep fib6_sernum per namespace to reduce number of flushes in case system has high number of namespaces * make fn_sernum updates cheaper v2: Incorporated feedback from Cong Wang, thanks a lot! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: don't walk node's leaf during serial number updateHannes Frederic Sowa
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: make fib6 serial number per namespaceHannes Frederic Sowa
Try to reduce number of possible fn_sernum mutation by constraining them to their namespace. Also remove rt_genid which I forgot to remove in 705f1c869d577c ("ipv6: remove rt6i_genid"). Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: only generate one new serial number per fib mutationHannes Frederic Sowa
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: make rt_sernum atomic and serial number fields ordinary intsHannes Frederic Sowa
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: minor fib6 cleanups like type safety, bool conversion, inline removalHannes Frederic Sowa
Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t to fib6_walk_state as recommended by Cong Wang. Cc: Cong Wang <cwang@twopensource.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: validate_xmit_vlan() is staticEric Dumazet
Marking this as static allows compiler to inline it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: fix rcu access on phonet_routesFabian Frederick
-Add __rcu annotation on table to fix sparse warnings: net/phonet/pn_dev.c:279:25: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:279:25: expected struct net_device *<noident> net/phonet/pn_dev.c:279:25: got void [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:376:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:376:17: expected struct net_device *volatile <noident> net/phonet/pn_dev.c:376:17: got struct net_device [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:392:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:392:17: expected struct net_device *<noident> net/phonet/pn_dev.c:392:17: got void [noderef] <asn:4>*<noident> -Access table with rcu_access_pointer (fixes the following sparse errors): net/phonet/pn_dev.c:278:25: error: incompatible types in comparison expression (different address spaces) net/phonet/pn_dev.c:391:17: error: incompatible types in comparison expression (different address spaces) Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06Merge branch 'net_sched-next'David S. Miller
John Fastabend says: ==================== net sched rcu updates This fixes the use of tcf_proto from RCU callbacks it requires moving the unbind calls out of the callbacks and removing the tcf_proto argument from the tcf_em_tree_destroy(). This is a rework of two previous series and addresses comments from Cong. And should apply against latest net-next. The previous series links below for reference: (1/2) net: sched: do not use tcf_proto 'tp' argument from call_rcu http://patchwork.ozlabs.org/patch/396149/ (2/2) net: sched: replace ematch calls to use struct net http://patchwork.ozlabs.org/patch/396150/ net: sched: cls_cgroup tear down exts and ematch from rcu callback http://patchwork.ozlabs.org/patch/396307/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: sched: do not use tcf_proto 'tp' argument from call_rcuJohn Fastabend
Using the tcf_proto pointer 'tp' from inside the classifiers callback is not valid because it may have been cleaned up by another call_rcu occuring on another CPU. 'tp' is currently being used by tcf_unbind_filter() in this patch we move instances of tcf_unbind_filter outside of the call_rcu() context. This is safe to do because any running schedulers will either read the valid class field or it will be zeroed. And all schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. Reported-by: Cong Wang <xiyou.wangconf@gmail.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: sched: cls_cgroup tear down exts and ematch from rcu callbackJohn Fastabend
It is not RCU safe to destroy the action chain while there is a possibility of readers accessing it. Move this code into the rcu callback using the same rcu callback used in the code patch to make a change to head. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: sched: remove tcf_proto from ematch callsJohn Fastabend
This removes the tcf_proto argument from the ematch code paths that only need it to reference the net namespace. This allows simplifying qdisc code paths especially when we need to tear down the ematch from an RCU callback. In this case we can not guarentee that the tcf_proto structure is still valid. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: introduce netdevice gso_min_segs attributeEric Dumazet
Some TSO engines might have a too heavy setup cost, that impacts performance on hosts sending small bursts (2 MSS per packet). This patch adds a device gso_min_segs, allowing drivers to set a minimum segment size for TSO packets, according to the NIC performance. Tested on a mlx4 NIC, this allows to get a ~110% increase of throughput when sending 2 MSS per packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06r8152: nway reset after setting eeehayeswang
Restart autonegotiation is necessary after setting EEE. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06ipv4: igmp: fix v3 general query drop monitor false positiveDaniel Borkmann
In case we find a general query with non-zero number of sources, we are dropping the skb as it's malformed. RFC3376, section 4.1.8. Number of Sources (N): This number is zero in a General Query or a Group-Specific Query, and non-zero in a Group-and-Source-Specific Query. Therefore, reflect that by using kfree_skb() instead of consume_skb(). Fixes: d679c5324d9a ("igmp: avoid drop_monitor false positives") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06bonding: Simplify the xmit function for modes that use xmit_hashMahesh Bandewar
Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06bonding: display xmit_hash_policy for non-dynamic-tlb modeMahesh Bandewar
It's a trivial fix to display xmit_hash_policy for this new TLB mode since it uses transmit-hash-poilicy as part of bonding-master info (/proc/net/bonding/<bonding-interface). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06Merge branch 'mlx4-next'David S. Miller
Amir Vadai says: ==================== net/mlx4_en: Optimizations to TX flow This patchset contains optimizations to TX flow in mlx4_en driver. It also introduce setting/getting tx copybreak, to enable controlling inline threshold dynamically. TX flow optimizations was authored and posted to the mailing list by Eric Dumazet [1] as a single patch. I splitted this patch to smaller patches, Reviewed it and tested. Changed from original patch: - s/iowrite32be/iowrite32/, since ring->doorbell_qpn is stored as be32 The tx copybreak patch was also suggested by Eric Dumazet, and was edited and reviewed by me. User space patch will be sent after kernel code is ready. I am sending this patchset now since the merge window is near and don't want to miss it. More work need to do: - Disable BF when xmit_more is in use - Make TSO use xmit_more too. Maybe by splitting small TSO packets in the driver itself, to avoid extra cpu/memory costs of GSO before the driver - Fix mlx4_en_xmit buggy handling of queue full in the middle of a burst partially posted to send queue using xmit_more Eric, I edited the patches to have you as the Author and the first signed-off-by. I hope it is ok with you (I wasn't sure if it is ok to sign by you), anyway all the credit to those changes should go to you. Patchset was tested and applied over commit 1e203c1 "(net: sched: suspicious RCU usage in qdisc_watchdog") [1] - https://patchwork.ozlabs.org/patch/394256/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Use the new tx_copybreak to set inline thresholdEric Dumazet
Instead of setting inline threshold using module parameter only on driver load, use set_tunable() to set it dynamically. No need to store the threshold per ring, using instead the netdev global priv->prof->inline_thold Initial value still is set using the module parameter, therefore backward compatability is kept. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06ethtool: Ethtool parameter to dynamically change tx_copybreakEric Dumazet
Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Enable the compiler to make is_inline() inlinedEric Dumazet
Reorganize code to call is_inline() once, so compiler can inline it Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: tx_info->ts_requested was not clearedEric Dumazet
Properly clear tx_info->ts_requested Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Use local var for skb_headlen(skb)Eric Dumazet
Access skb_headlen() once in tx flow Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Use local var in tx flow for skb_shinfo(skb)Eric Dumazet
Acces skb_shinfo(skb) once in tx flow. Also, rename @i variable to @i_frag to avoid confusion, as the "goto tx_drop_unmap;" relied on this @i variable. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: mlx4_en_xmit() reads ring->cons once, and ahead of time to ↵Eric Dumazet
avoid stalls Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Avoid false sharing in mlx4_en_en_process_tx_cq()Eric Dumazet
mlx4_en_process_tx_cq() carefully fetches and writes ring->last_nr_txbb and ring->cons only one time to avoid false sharing Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Use prefetch in tx pathEric Dumazet
mlx4_en_free_tx_desc() uses a prefetchw(&skb->users) to speed up consume_skb() prefetchw(&ring->tx_queue->dql) to speed up BQL update Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Avoid a cache line miss in TX completion for single frag skb'sEric Dumazet
Add frag0_dma/frag0_byte_count into mlx4_en_tx_info to avoid a cache line miss in TX completion for frames having one dma element. (We avoid reading back the tx descriptor) Note this could be extended to 2/3 dma elements later, as we have free room in mlx4_en_tx_info Also, mlx4_en_free_tx_desc() no longer accesses skb_shinfo(). We use a new nr_maps fields in mlx4_en_tx_info to avoid 2 or 3 cache misses. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: tx_info allocated with kmalloc() instead of vmalloc()Eric Dumazet
Try to allocate using kmalloc_node() first, only on failure use vmalloc() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Avoid calling bswap in tx fast pathEric Dumazet
- doorbell_qpn is stored in the cpu_to_be32() way to avoid bswap() in fast path. - mdev->mr.key stored in ring->mr_key to also avoid bswap() and access to cold cache line. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Align tx path structures to cache linesEric Dumazet
Reorganize struct mlx4_en_tx_ring to have: - One cache line containing last_nr_txbb & cons & wake_queue, used by tx completion. - One cache line containing fields dirtied by mlx4_en_xmit() - Following part is read mostly and shared by cpus. Align struct mlx4_en_tx_info to a cache line Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Code cleanups in tx pathEric Dumazet
- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: sched: avoid costly atomic operation in fq_dequeue()Eric Dumazet
Standard qdisc API to setup a timer implies an atomic operation on every packet dequeue : qdisc_unthrottled() It turns out this is not really needed for FQ, as FQ has no concept of global qdisc throttling, being a qdisc handling many different flows, some of them can be throttled, while others are not. Fix is straightforward : add a 'bool throttle' to qdisc_watchdog_schedule_ns(), and remove calls to qdisc_unthrottled() in sch_fq. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06fec: Fix fec_enet_alloc_buffers() error pathFabio Estevam
When fec_enet_alloc_buffers() fails we should better undo the previous actions, which consists of: disabling the FEC clocks and putting the FEC pins into inactive state. The error path for fec_enet_mii_probe() is kept unchanged. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06drivers/net/phy/Kconfig: Let MDIO_BCM_UNIMAC depend on HAS_IOMEMChen Gang
MDIO_BCM_UNIMAC needs HAS_IOMEM, so depend on it, the related error ( with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: skb_segment() provides list head and tailEric Dumazet
Its unfortunate we have to walk again skb list to find the tail after segmentation, even if data is probably hot in cpu caches. skb_segment() can store the tail of the list into segs->prev, and validate_xmit_skb_list() can immediately get the tail. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06Merge branch 'geneve'David S. Miller
Andy Zhou says: ==================== Add Geneve tunnel protocol support This patch series adds kernel support for Geneve (Generic Network Virtualization Encapsulation) based on Geneve IETF draft: http://www.ietf.org/id/draft-gross-geneve-01.txt Patch 1 implements Geneve tunneling protocol driver Patch 2-6 adds openvswitch support for creating and using Geneve tunnels by OVS user space. v1->v2: Style fixes: use tab instead space for Kconfig Patch 2-6 are reviewed by Pravin Shetty, add him to acked-by Patch 6 was reviewed by Thomas Graf when commiting to openvswitch.org, add him to acked-by. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Add support for Geneve tunneling.Jesse Gross
The Openvswitch implementation is completely agnostic to the options that are in use and can handle newly defined options without further work. It does this by simply matching on a byte array of options and allowing userspace to setup flows on this array. Signed-off-by: Jesse Gross <jesse@nicira.com> Singed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Factor out allocation and verification of actions.Jesse Gross
As the size of the flow key grows, it can put some pressure on the stack. This is particularly true in ovs_flow_cmd_set(), which needs several copies of the key on the stack. One of those uses is logically separate, so this factors it out to reduce stack pressure and improve readibility. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure.Jesse Gross
Currently, the flow information that is matched for tunnels and the tunnel data passed around with packets is the same. However, as additional information is added this is not necessarily desirable, as in the case of pointers. This adds a new structure for tunnel metadata which currently contains only the existing struct. This change is purely internal to the kernel since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version of OVS_KEY_ATTR_TUNNEL that is translated at flow setup. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Add support for matching on OAM packets.Jesse Gross
Some tunnel formats have mechanisms for indicating that packets are OAM frames that should be handled specially (either as high priority or not forwarded beyond an endpoint). This provides support for allowing those types of packets to be matched. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Eliminate memset() from flow_extract.Jesse Gross
As new protocols are added, the size of the flow key tends to increase although few protocols care about all of the fields. In order to optimize this for hashing and matching, OVS uses a variable length portion of the key. However, when fields are extracted from the packet we must still zero out the entire key. This is no longer necessary now that OVS implements masking. Any fields (or holes in the structure) which are not part of a given protocol will be by definition not part of the mask and zeroed out during lookup. Furthermore, since masking already uses variable length keys this zeroing operation automatically benefits as well. In principle, the only thing that needs to be done at this point is remove the memset() at the beginning of flow. However, some fields assume that they are initialized to zero, which now must be done explicitly. In addition, in the event of an error we must also zero out corresponding fields to signal that there is no valid data present. These increase the total amount of code but very little of it is executed in non-error situations. Removing the memset() reduces the profile of ovs_flow_extract() from 0.64% to 0.56% when tested with large packets on a 10G link. Suggested-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-27 12:53:06 +0000