summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-12->splice_write() via ->write_iter()Al Viro
iter_file_splice_write() - a ->splice_write() instance that gathers the pipe buffers, builds a bio_vec-based iov_iter covering those and feeds it to ->write_iter(). A bunch of simple cases coverted to that... [AV: fixed the braino spotted by Cyrill] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06bio_vec-backed iov_iterAl Viro
New variant of iov_iter - ITER_BVEC in iter->type, backed with bio_vec array instead of iovec one. Primitives taught to deal with such beasts, __swap_write() switched to using that kind of iov_iter. Note that bio_vec is just a <page, offset, length> triple - there's nothing block-specific about it. I've left the definition where it was, but took it from under ifdef CONFIG_BLOCK. Next target: ->splice_write()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06optimize copy_page_{to,from}_iter()Al Viro
if we'd ended up in the end of a segment, jump to the beginning of the next one (iov_offset = 0, iov++), rather than having the next primitive deal with that. Ought to be folded back... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06bury generic_file_aio_{read,write}Al Viro
no callers left Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06lustre: get rid of messing with iovecsAl Viro
* switch to ->read_iter/->write_iter * keep a pointer to iov_iter instead of iov/nr_segs * do not modify iovecs; use iov_iter_truncate()/iov_iter_advance() and a new primitive - iov_iter_reexpand() (expand previously truncated iterator) istead. * (racy) check for lustre VMAs intersecting with iovecs kept for now as for_each_iov() loop. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ceph: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ceph_sync_direct_write: stop poking into iov_iter gutsAl Viro
all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ceph_sync_read: stop poking into iov_iter gutsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: copy_page_from_iter()Al Viro
parallel to copy_page_to_iter(). pipe_write() switched to it (and became ->write_iter()). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06fuse: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06btrfs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ocfs2: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06xfs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06afs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06gfs2: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06nfs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ubifs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06bury __generic_file_aio_write()Al Viro
all users converted to __generic_file_write_iter() now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06cifs: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06udf: switch to ->write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06convert ext4 to ->write_iter()Al Viro
unfortunately, Ted's changes to ext4_file_write() are *still* an incomplete fix - playing with rlimits can let you smuggle an unaligned request past the checks. So there almost certainly will be more merge PITA around that place... [fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06Merge ext4 changes in ext4_file_write() into for-nextAl Viro
From ext4.git#dev, needed for switch of ext4 to ->write_iter() ;-/
2014-05-06blkdev_aio_write() - turn into blkdev_write_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06write_iter variants of {__,}generic_file_aio_write()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ceph: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06nfs: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06fs/block_dev.c: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06shmem: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06pipe: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06cifs: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06fuse_file_aio_read(): convert to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ocfs2: switch to ->read_iter()Al Viro
tracepoints are evil, exhibit #6969... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06ecryptfs: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06xfs: switch to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch simple generic_file_aio_read() users to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new methods: ->read_iter() and ->write_iter()Al Viro
Beginning to introduce those. Just the callers for now, and it's clumsier than it'll eventually become; once we finish converting aio_read and aio_write instances, the things will get nicer. For now, these guys are in parallel to ->aio_read() and ->aio_write(); they take iocb and iov_iter, with everything in iov_iter already validated. File offset is passed in iocb->ki_pos, iov/nr_segs - in iov_iter. Main concerns in that series are stack footprint and ability to split the damn thing cleanly. [fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06replace checking for ->read/->aio_read presence with check in ->f_modeAl Viro
Since we are about to introduce new methods (read_iter/write_iter), the tests in a bunch of places would have to grow inconveniently. Check once (at open() time) and store results in ->f_mode as FMODE_CAN_READ and FMODE_CAN_WRITE resp. It might end up being a temporary measure - once everything switches from ->aio_{read,write} to ->{read,write}_iter it might make sense to return to open-coded checks. We'll see... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06xfs: trim the argument lists of xfs_file_{dio,buffered}_aio_write()Al Viro
pos is redundant (it's iocb->ki_pos), and iov/nr_segs/count are taken care of by lifting iov_iter into the caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06blkdev_aio_read(): switch to generic_file_read_iter(), get rid of iov_shorten()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06iov_iter_truncate()Al Viro
Now It Can Be Done(tm) - we don't need to do iov_shorten() in generic_file_direct_write() anymore, now that all ->direct_IO() instances are converted to proper iov_iter methods and honour iter->count and iter->iov_offset properly. Get rid of count/ocount arguments of generic_file_direct_write(), while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06btrfs: switch check_direct_IO() to iov_iterAl Viro
... and don't open-code iov_iter_alignment() there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: iov_iter_get_pages_alloc()Al Viro
same as iov_iter_get_pages(), except that pages array is allocated (kmalloc if possible, vmalloc if that fails) and left for caller to free. Lustre and NFS ->direct_IO() switched to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: iov_iter_npages()Al Viro
counts the pages covered by iov_iter, up to given limit. do_block_direct_io() and fuse_iter_npages() switched to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06f2fs: switch to iov_iter_alignment()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06fuse: switch to iov_iter_get_pages()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06fuse: pull iov_iter initializations upAl Viro
... to fuse_direct_{read,write}(). ->direct_IO() path uses the iov_iter passed by the caller instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: iov_iter_get_pages()Al Viro
iov_iter_get_pages(iter, pages, maxsize, &start) grabs references pinning the pages of up to maxsize of (contiguous) data from iter. Returns the amount of memory grabbed or -error. In case of success, the requested area begins at offset start in pages[0] and runs through pages[1], etc. Less than requested amount might be returned - either because the contiguous area in the beginning of iterator is smaller than requested, or because the kernel failed to pin that many pages. direct-io.c switched to using iov_iter_get_pages() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06dio: take updating ->result into do_direct_IO()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06start adding the tag to iov_iterAl Viro
For now, just use the same thing we pass to ->direct_IO() - it's all iovec-based at the moment. Pass it explicitly to iov_iter_init() and account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO() uses. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: generic_file_read_iter()Al Viro
iov_iter-using variant of generic_file_aio_read(). Some callers converted. Note that it's still not quite there for use as ->read_iter() - we depend on having zero iter->iov_offset in O_DIRECT case. Fortunately, that's true for all converted callers (and for generic_file_aio_read() itself). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-21 02:23:59 +0000