| Age | Commit message (Collapse) | Author |
|---|
|
The default rx buffer water marks for XOFF/XON are for 1500 MTU. At
larger MTUs, these water marks need to be adjusted for effective
flow control.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some quad-port cards that cannot support WoL on all ports due
to excessive power consumption, the driver needs to restrict WoL
on some ports by checking VAUX_PRESET bit.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using read_pnet() and write_pnet() in neighbour code ease the reading
of code.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can shrink size of "struct inet_bind_bucket" by 50%, using
read_pnet() and write_pnet()
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces two helpers that deal with reading and writing
struct net pointers in various network structures.
Their implementation depends on CONFIG_NET_NS
For symmetry, both functions work with "struct net **pnet".
Their usage should reduce the number of #ifdef CONFIG_NET_NS,
without adding many helpers for each network structure
that hold a "struct net *pointer"
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides a missing link in the code chain, as several features implicitly
depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector
feature, but also Ack Ratio and Send Loss Event Rate (also taken care of).
For Send Ack Vector, the situation is as follows:
* since CCID2 mandates the use of Ack Vectors, there is no point in allowing
endpoints which use CCID2 to disable Ack Vector features such a connection;
* a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer
with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4);
* for all other CCIDs, the use of (Send) Ack Vector is optional and thus
negotiable. However, this implies that the code negotiating the use of Ack
Vectors also supports it (i.e. is able to supply and to either parse or
ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack
Vector support), the use of Ack Vectors is here disabled, with a comment
in the source code.
An analogous consideration arises for the Send Loss Event Rate feature,
since the CCID-3 implementation does not support the loss interval options
of RFC 4342. To make such use explicit, corresponding feature-negotiation
options are inserted which signal the use of the loss event rate option,
as it is used by the CCID3 code.
Lastly, the values of the Ack Ratio feature are matched to the choice of CCID.
The patch implements this as a function which is called after the user has
made all other registrations for changing default values of features.
The table is variable-length, the reserved (and hence for feature-negotiation
invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0'
is used to mark the end of the table.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides a data structure to record which CCIDs are locally supported
and three accessor functions:
- a test function for internal use which is used to validate CCID requests
made by the user;
- a copy function so that the list can be used for feature-negotiation;
- documented getsockopt() support so that the user can query capabilities.
The data structure is a table which is filled in at compile-time with the
list of available CCIDs (which in turn depends on the Kconfig choices).
Using the copy function for cloning the list of supported CCIDs is useful for
feature negotiation, since the negotiation is now with the full list of available
CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation
will not fail if the peer requests to use CCID3 instead of CCID2.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two registration routines, for SP and NN features, are provided by this patch,
replacing a previous routine which was used for both feature types.
These are internal-only routines and therefore start with `__feat_register'.
It further exports the known limits of Sequence Window and Ack Ratio as symbolic
constants.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch limits feature (capability) negotation to the connection setup phase:
1. Although it is theoretically possible to perform feature negotiation at any
time (and RFC 4340 supports this), in practice this is prohibitively complex,
as it requires to put traffic on hold for each new negotiation.
2. As a byproduct of restricting feature negotiation to connection setup, the
feature-negotiation retransmit timer is no longer required. This part is now
mapped onto the protocol-level retransmission.
Details indicating why timers are no longer needed can be found on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
implementation_notes.html
This patch disables anytime negotiation, subsequent patches work out full
feature negotiation support for connection setup.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unused after kmem_cache_zalloc() conversion.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
->pde isn't actually needed, since name is stashed in ->id.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/message/fusion/mptlan.c
drivers/net/sfc/ethtool.c
net/mac80211/debugfs_sta.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: handle HRTIMER_CB_IRQSAFE_UNLOCKED correctly from softirq context
nohz: disable tick_nohz_kick_tick() for now
irq: call __irq_enter() before calling the tick_idle_check
x86: HPET: enter hpet_interrupt_handler with interrupts disabled
x86: HPET: read from HPET_Tn_CMP() not HPET_T0_CMP
x86: HPET: convert WARN_ON to WARN_ON_ONCE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: release buddies on yield
fix for account_group_exec_runtime(), make sure ->signal can't be freed under rq->lock
sched: clean up debug info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring-buffer: prevent infinite looping on time stamping
ftrace: disable tracing on resize
ftrace: fix breakage in bin_fmt results
ftrace: ftrace.txt version update
ftrace: update txt document
|
|
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
[XFS] XFS: Check for valid transaction headers in recovery
[XFS] handle memory allocation failures during log initialisation
[XFS] Account for allocated blocks when expanding directories
[XFS] Wait for all I/O on truncate to zero file size
[XFS] Fix use-after-free with log and quotas
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (21 commits)
ocfs2: Check search result in ocfs2_xattr_block_get()
ocfs2: fix printk related build warnings in xattr.c
ocfs2: truncate outstanding block after direct io failure
ocfs2/xattr: Proper hash collision handle in bucket division
ocfs2: return 0 in page_mkwrite to let VFS retry.
ocfs2: Set journal descriptor to NULL after journal shutdown
ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c.
ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails
ocfs2: Fix checking of return value of new_inode()
ocfs2: Fix check of return value of ocfs2_start_trans()
ocfs2: Fix some typos in xattr annotations.
ocfs2: Remove unused ocfs2_restore_xattr_block().
ocfs2: Don't repeat ocfs2_xattr_block_find()
ocfs2: Specify appropriate journal access for new xattr buckets.
ocfs2: Check errors from ocfs2_xattr_update_xattr_search()
ocfs2: Don't return -EFAULT from a corrupt xattr entry.
ocfs2: Check xattr block signatures properly.
ocfs2: add handler_map array bounds checking
ocfs2: remove duplicate definition in xattr
ocfs2: fix function declaration and definition in xattr
...
|
|
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (35 commits)
V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to work_queue
V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx.
V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx.
V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name.
V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup
V4L/DVB (9493): kconfig patch
V4L/DVB (9527): af9015: fix compile warnings
V4L/DVB (9524): af9013: fix bug in status reading
V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call
V4L/DVB (9510): cx18: Fix write retries for registers that always change - part 2.
V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not.
V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + de-alloc fix
V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-users
V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fix
V4L/DVB (9494): anysee: initialize anysee_usb_mutex statically
V4L/DVB (9492): unplug oops from dvb_frontend_init...
V4L/DVB (9486): ivtv/ivtvfb: no longer experimental
V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependency
V4L/DVB (9482): Documentation, especially regarding audio and informational links
V4L/DVB (9475): cx18: Disable write retries for registers that always change - part 1.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: Update desktop/server defconfigs
powerpc: Fix msr check in compat_sys_swapcontext
powerpc: Repair device bindings documentation
powerpc: Updated Freescale PPC related defconfigs
powerpc: Update QE/CPM2 usb_ctlr structures for USB support
powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS
powerpc: Fix Book-E watchdog timer interval setting
powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/i915: Move legacy breadcrumb out of the reserved status page area
drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA
drm/radeon: map registers at load time
drm: Remove infrastructure for supporting i915's vblank swapping.
i915: Remove racy delayed vblank swap ioctl.
i915: Don't whine when pci_enable_msi() fails.
i915: Don't attempt to short-circuit object_wait_rendering by checking domains.
i915: Clean up sarea pointers on leavevt
i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: fix last_reset timestamp handling
libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127
[libata] pata_pcmcia: another memory card support
[libata] pata_sch: notice attached slave devices
[libata] pata_cs553*.c: cleanup kernel-doc
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Update defconfig.
Revert "sparc: correct section of current_pc()"
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
dsa: fix master interface allmulti/promisc handling
dsa: fix skb->pkt_type when mac address of slave interface differs
net: fix setting of skb->tail in skb_recycle_check()
net: fix /proc/net/snmp as memory corruptor
mac80211: fix a buffer overrun in station debug code
netfilter: payload_len is be16, add size of struct rather than size of pointer
ipv6: fix ip6_mr_init error path
[4/4] dca: fixup initialization dependency
[3/4] I/OAT: fix async_tx.callback checking
[2/4] I/OAT: fix dma_pin_iovec_pages() error handling
[1/4] I/OAT: fix channel resources free for not allocated channels
ssb: Fix DMA-API compilation for non-PCI systems
SSB: hide empty sub menu
vlan: Fix typos in proc output string
[netdrvr] usb/hso: Cleanup rfkill error handling
sfc: Correct address of gPXE boot configuration in EEPROM
el3_common_init() should be __devinit, not __init
hso: rfkill type should be WWAN
mlx4_en: Start port error flow bug fix
af_key: mark policy as dead before destroying
|
|
Clear buddies on yield, so that the buddy rules don't schedule them
despite them being placed right-most.
This fixed a performance regression with yield-happy binary JVMs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Lin Ming <ming.m.lin@intel.com>
|
|
work_queue
cx18: Move DVB buffer transfer handling from irq handler to work_queue thread.
In order to properly lock the epu2cpu mailbox for driver to CX23418 commands,
the DVB/TS buffer handling needs to be moved from the IRQ handler and IRQ
context to a work queue. This work_queue implmentation is strikingly similar
to the ivtv implementation - for better or worse.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
- touch only one register for brightness change
- no quality control
- don't probe again at streamon time.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This patch fixes the H flip and the R & B color inversion of mode 320x240.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
handling cleanup
cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup.
The SCB field definitions for Ack IRQ's for mailboxes were inconsistent with
the bitmasks being loaded into those SCB fields and the SW2 Ack IRQ handling
logic. Renamed fields in SCB to make things consistent and did misc IRQ
handling cleanups: removing legacy ivtv dma_reg_lock, HPU IRQ flags, etc.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Ok I made a patch that converts gspca kconfig file to a more standard=
one, with tabs + 2 white spaces, so that if a warning is added it still
compiles
please find it attached
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
- use static to avoid compile warnings
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
- ! has a higher precedence than &
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call.
Give the encoder time to complete the MDL release before destroying the
encoder internal task. This avoids an encoder lockup on the next digital
capture and error messages about buffers being returned for an inactive
encoder task handle.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
part 2.
cx18: Fix write retries for registers that always change - part 2.
Some registers, especially interrupt related ones, will never read
back the value just written. Modified interrupt register readback
checks to make sure the intended effect was achieved.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
de-alloc fix
Final fix for when analogue only is selected
for compilation (ie, !CX88_DVB)
This tidies up previous fix and adds missing
de-alloc memory leak on fault (eg, if fe1 fails to alloc
where fe0 was allocated).
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Allows multiple access to the mpeg device
Signed-off-by: Frederic CAND <frederic.cand@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Starts encoder not only on a read call but also on a poll command.
Signed-off-by: Frederic CAND <frederic.cand@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
anysee_usb_mutex is initialized at every time the anysee device is probed.
If the second anysee device is probed while anysee_usb_mutex is locked by
the first anysee device, the mutex is broken.
This patch fixes by initialize anysee_usb_mutex statically rather
than initialize at probe time.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with
2.6.24, I was met with an oops [1]. The problem is relevant to
2.6.25/26-rc also.
dvb_frontend_init() was called either from re-creation of the kdvb-fe0
thread - seems unlikely, or someone called
dvb_frontend_reinitialise(), causing this path in the thread - really
unlikely, as I can't find any call-site for it.
Either way, quite a number of drivers call dvb_usb_generic_rw() [2]
without checking the validity of the relevant member in the
dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw()
sanity-check and fail (rather than loading from 0x120) seems
reasonable defensive programming [3], in light of it being called in
this way.
The problem with this, is that drivers don't check the return code of
the init call [4]. Does it make sense to cook a patch which allows the
failure to be propagated back up, or am I missing something else?
Thanks,
Daniel
<whoops, hot unplug>
[83711.538485] dvb-usb: bulk message failed: -71 (1/0)
[83711.538875] dvb-usb: bulk message failed: -71 (1/0)
[83711.538899] usb 7-5: USB disconnect, address 3
[83711.538905] dvb-usb: bulk message failed: -22 (1/0)
[83711.538924] dvb-usb: bulk message failed: -22 (1/0)
[83711.538943] dvb-usb: bulk message failed: -22 (1/0)
[83711.588979] dvb-usb: bulk message failed: -22 (1/0)
[83711.589031] dvb-usb: bulk message failed: -22 (1/0)
[83711.589078] dvb-usb: bulk message failed: -22 (1/0)
[83711.589122] dvb-usb: bulk message failed: -22 (1/0)
[83711.589167] dvb-usb: bulk message failed: -22 (1/0)
[83711.639233] dvb-usb: bulk message failed: -22 (1/0)
[83711.639282] dvb-usb: bulk message failed: -22 (1/0)
[83711.639330] dvb-usb: bulk message failed: -22 (1/0)
[83711.639374] dvb-usb: bulk message failed: -22 (1/0)
[83711.639421] dvb-usb: bulk message failed: -22 (1/0)
[83711.658391] dvb-usb: bulk message failed: -22 (1/0)
[83768.174281] dvb-usb: bulk message failed: -22 (2/-32512)
[83768.174350] Unable to handle kernel NULL pointer
dereference<6>dvb-usb: WideView WT-220U PenType Receiver
(Typhoon/Freecom) successfully deinitialized and disconnected.
[83768.174459] at 0000000000000120 RIP:
[83768.174459] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0
[83768.174580] PGD 0
[83768.174643] Oops: 0000 [1] SMP
[83768.174723] CPU 0
[83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd
nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq
sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp
iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle
iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop
ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core
sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm
snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6
button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci
ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore
e1000 thermal processor fan fbcon tileblit font bitblit softcursor
fuse
[83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1
[83768.177009] RIP: 0010:[<ffffffff88339b4f>] [<ffffffff88339b4f>]
:dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0
[83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286
[83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000
[83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000
[83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400
[83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000
[83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000)
knlGS:0000000000000000
[83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0
[83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo
ffff810021938000, task ffff81003bd1b7a0)
[83768.177629] Stack: ffff81003e9b6828 0000000000000000
ffff8100378369f8 0000000000000000
[83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30
ffff81003c10b400
[83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0
ffffffff88342452
[83768.178054] Call Trace:
[83768.178130] [<ffffffff88342452>] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30
[83768.178178] [<ffffffff88339f6a>] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50
[83768.178229] [<ffffffff88325c41>] :dvb_core:dvb_frontend_init+0x21/0x70
[83768.178278] [<ffffffff8832746b>] :dvb_core:dvb_frontend_thread+0x8b/0x370
[83768.178329] [<ffffffff883273e0>] :dvb_core:dvb_frontend_thread+0x0/0x370
[83768.178382] [<ffffffff80253e3b>] kthread+0x4b/0x80
[83768.178427] [<ffffffff8020d198>] child_rip+0xa/0x12
[83768.178473] [<ffffffff80253df0>] kthread+0x0/0x80
[83768.178514] [<ffffffff8020d18e>] child_rip+0x0/0x12
[83768.178557]
[83768.178594]
[83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0
0f 84 ad 00
[83768.179167] RIP [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0
[83768.179234] RSP <ffff810021939df0>
[83768.179271] CR2: 0000000000000120
[83768.179419] ---[ end trace dba8483163cb1700 ]---
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Remove the EXPERIMENTAL tag.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
ivtv used tvaudio in the past and at the time tvaudio required V4L1.
Since tvaudio is no longer dependent on V4L1 and since ivtv actually
no longer uses tvaudio at all, this is no removed from Kconfig.
Without this patch ivtv won't be build if V4L1 is disabled.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
links
This patch adds a recommendation to select SND_USB_AUDIO for listing and
adds a documentation file for si470x.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
- part 1.
cx18: Disable write retries for registers that always change - part 1.
Interrupt related registers will likely not read back the value we just wrote.
Disable retries for these registers for now to avoid accidently discarding
interrupts. More intelligent read back verification criteria are needed for
these and other registers (e.g. GPIO line registers), which will be addressed in
subsequent changes.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
* Apparently the author of the saa7110 driver was confused by the
number of outputs returned by DECODER_GET_CAPABILITIES. Of course a
decoder chip has no analog ouputs, but it must have at least one
digital output.
* Fix an off-by-one error when checking the input value of
DECODER_SET_INPUT.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
