| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to the pidfd test"
* tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd_test: Remove the erroneous ','
selftests: pidfd: Fix compling warnings
ksefltests: pidfd: Fix wait_states: Test terminated by timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix an endian thinko in the asm-generic compat_arg_u64() which led to
syscall arguments being swapped for some compat syscalls.
- Fix syscall wrapper handling of syscalls with 64-bit arguments on
32-bit kernels, which led to syscall arguments being misplaced.
- A build fix for amdgpu on Book3E with AltiVec disabled.
Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.
* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Select ARCH_SPLIT_ARG64
powerpc/32: fix syscall wrappers with 64-bit arguments
asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
|
|
Dexuan Cui says:
====================
vsock: remove an unused variable and fix infinite sleep
Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================
Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().
Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().
Fixes: b3f7fd54881b ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove the unused variable introduced by 19c1b90e1979.
Fixes: 19c1b90e1979 ("af_vsock: separate receive data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.
After the fix:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:aa:bb:cc:dd:ee master br0 static
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:
KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
<TASK>
neigh_table_clear+0x94/0x2d0
ndisc_cleanup+0x27/0x40 [ipv6]
inet6_init+0x21c/0x2cb [ipv6]
do_one_initcall+0xd3/0x4d0
do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception
When ipv6 initialization fails, it will try to cleanup and calls:
neigh_table_clear()
neigh_ifdown(tbl, NULL)
pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
# dev_net(NULL) triggers null-ptr-deref.
Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.
Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 194730a9beb5 ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950dd71> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Fixes: 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) netlink socket notifier might win race to release objects that are
already pending to be released via commit release path, reported by
syzbot.
2) No need to postpone flow rule release to commit release path, this
triggered the syzbot report, complementary fix to previous patch.
3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.
4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.
5) Incorrect error path handling when BPF NAT fails to register, from
Chen Zhongjin.
6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.
Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
ipvs: fix WARNING in ip_vs_app_net_cleanup()
ipvs: fix WARNING in __ip_vs_cleanup_batch()
ipvs: use explicitly signed chars
netfilter: nf_tables: release flow rule object from commit path
netfilter: nf_tables: netlink notifier might race to release objects
====================
Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth 2022-11-02
- Fix memory leak in hci_vhci driver
- Fix handling of skb on virtio_bt driver
- Fix accepting connection for invalid L2CAP PSM
- Fix attemting to access uninitialized memory
- Fix use-after-free in l2cap_reassemble_sdu
- Fix use-after-free in l2cap_conn_del
- Fix handling of destination address type for CIS
- Fix not restoring ISO buffer count on disconnect
* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================
Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.
CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>
|
|
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
[...]
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
[<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
[<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
[<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
[<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
[<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
[<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
[<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
[<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
[<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().
Fixes: 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length")
Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/
Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
l2cap_chan_unlock(chan) will trigger UAF issue.
The process is as follows:
Receive data:
l2cap_data_channel()
a2mp_channel_create() --->channel ref is 2
l2cap_chan_put() --->channel ref is 1
Triger event:
hci_error_reset()
hci_dev_do_close()
...
l2cap_disconn_cfm()
l2cap_conn_del()
l2cap_chan_hold() --->channel ref is 2
l2cap_chan_del() --->channel ref is 1
a2mp_chan_close_cb() --->channel ref is 0, release channel
l2cap_chan_unlock() --->UAF of channel
The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
print_report.cold+0x2ba/0x719
kasan_report+0xb1/0x1e0
kasan_check_range+0x140/0x190
__mutex_unlock_slowpath+0xa6/0x5e0
l2cap_conn_del+0x404/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 7593:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0xa9/0xd0
l2cap_chan_create+0x40/0x930
amp_mgr_create+0x96/0x990
a2mp_channel_create+0x7d/0x150
l2cap_recv_frame+0x51b8/0x9a70
l2cap_recv_acldata+0xaa3/0xc00
hci_rx_work+0x702/0x1220
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Freed by task 7593:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x167/0x1c0
slab_free_freelist_hook+0x89/0x1c0
kfree+0xe2/0x580
l2cap_chan_put+0x22a/0x2d0
l2cap_conn_del+0x3fc/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:
BUG: unable to handle page fault for address: ffffed1021de29ff
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Fix the race condition between the following two flows that run in
parallel:
1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
__sock_queue_rcv_skb.
2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
Freed by task 27920:
kasan_save_stack (mm/kasan/common.c:39)
kasan_set_track (mm/kasan/common.c:45)
kasan_set_free_info (mm/kasan/generic.c:372)
____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
slab_free_freelist_hook (mm/slub.c:1780)
kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
sock_read_iter (net/socket.c:1087)
new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
vfs_read (fs/read_write.c:482)
ksys_read (fs/read_write.c:620)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This mostly handles oddities with the serial port 8250_gsc.c driver.
Although the name suggests it's just for serial ports on the GSC bus
(e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
PCI devices (e.g. on the SuperIO chip) as well.
Thus this renames the driver to 8250_parisc and fixes the config
dependencies.
The other change is a cleanup on how the device IDs of devices in a
PA-RISC machine are shown at startup"
* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid printing the hardware path twice
parisc: Export iosapic_serial_irq() symbol for serial port driver
MAINTAINERS: adjust entry after renaming parisc serial driver
parisc: Use signed char for hardware path in pdc.h
parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
|
|
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set.
Fixes: ccf0a4b7fc68 ("netfilter: ipset: Add bucketsize parameter to all hash types")
Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull NFS client bugfixes from Anna Schumaker:
- Fix some coccicheck warnings
- Avoid memcpy() run-time warning
- Fix up various state reclaim / RECLAIM_COMPLETE errors
- Fix a null pointer dereference in sysfs
- Fix LOCK races
- Fix gss_unwrap_resp_integ() crasher
- Fix zero length clones
- Fix memleak when allocate slot fails
* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: Fix kmemleak when allocate slot failed
NFSv4.2: Fixup CLONE dest file size for zero-length count
SUNRPC: Fix crasher in gss_unwrap_resp_integ()
NFSv4: Retry LOCK on OLD_STATEID during delegation return
SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
NFSv4: Fix a potential state reclaim deadlock
NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
nfs: Remove redundant null checks before kfree
|
|
Pull rdma fixes from Jason Gunthorpe:
"Fix a few more of the usual sorts of bugs:
- Another regression with source route validation in CMA, introduced
this merge window
- Crash in hfi1 due to faulty list operations
- PCI ID updates for EFA
- Disable LOCAL_INV in hns because it causes a HW hang
- Crash in hns due to missing initialization
- Memory leak in rxe
- Missing error unwind during ib_core module loading
- Missing error handling in qedr around work queue creation during
startup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: clean up work queue on failure in qedr_alloc_resources()
RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
RDMA/rxe: Fix mr leak in RESPST_ERR_RNR
RDMA/hns: Fix NULL pointer problem in free_mr_init()
RDMA/hns: Disable local invalidate operation
RDMA/efa: Add EFA 0xefa2 PCI ID
IB/hfi1: Correctly move list in sc_disable()
RDMA/cma: Use output interface for net_dev check
|
|
Yang Yingliang says:
====================
two fixes for mISDN
This patchset fixes two issues when device_add() returns error.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The class is set in mISDN_register_device(), but if device_add() returns
error, it will lead to delete a device without added, fix this by using
device_is_registered() to check if the device is registered.
Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
add put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
Set device class before put_device() to avoid null release() function
WARN message in device_release().
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The syzkaller reported an issue:
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: rcu_gp srcu_invoke_callbacks
RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101
Call Trace:
<IRQ>
rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255
rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009
rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
[...]
</IRQ>
It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is
called in the rose_send_frame(). It's the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and
the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr.
It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf
("rose: Fix Null pointer dereference in rose_send_frame()") ever.
But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8
("rose: check NULL rose_loopback_neigh->loopback") again.
We fix it by add NULL check in rose_transmit_clear_request(). When
the 'dev' in 'neigh' is NULL, we don't reply the request and just
clear it.
syzkaller don't provide repro, and I provide a syz repro like:
r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2)
ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201})
r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40)
connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)
Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In nf_nat_init(), register_nf_nat_bpf() can fail and return directly
without any error handling.
Then nf_nat_bysource will leak and registering of &nat_net_ops,
&follow_master_nat and nf_nat_hook won't be reverted.
This leaves wild ops in linkedlists and when another module tries to
call register_pernet_operations() or nf_ct_helper_expectfn_register()
it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 820dc0523e05 ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove the erroneous ',', otherwise it might result in wrong output
and report:
...
Bail out! (errno %d)
test: Unexpected epoll_wait result (c=4208480, events=2)
...
Fixes: 740378dc7834 ("pidfd: add polling selftests")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
During the initialization of ip_vs_app_net_init(), if file ip_vs_app
fails to be created, the initialization is successful by default.
Therefore, the ip_vs_app file doesn't be found during the remove in
ip_vs_app_net_cleanup(). It will cause WRNING.
The following is the stack information:
name 'ip_vs_app'
WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 457c4cbc5a3d ("[NET]: Make /proc/net per network namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn
or ip_vs_conn_sync fails to be created, the initialization is successful
by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't
be found during the remove.
The following is the stack information:
name 'ip_vs_conn_sync'
WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712
remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
__ip_vs_cleanup_batch+0x7d/0x120
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The `char` type with no explicit sign is sometimes signed and sometimes
unsigned. This code will break on platforms such as arm, where char is
unsigned. So mark it here as explicitly signed, so that the
todrop_counter decrement and subsequent comparison is correct.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Jakub reported that the addition of the "network_byte_order"
member in struct nla_policy increases size of 32bit platforms.
Instead of scraping the bit from elsewhere Johannes suggested
to add explicit NLA_BE types instead, so do this here.
NLA_POLICY_MAX_BE() macro is removed again, there is no need
for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing.
NLA_BE64 can be added later.
Fixes: 08724ef69907 ("netlink: introduce NLA_POLICY_MAX_BE")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When lan966x was receiving a frame, then it was building the skb and
after that it was calling dma_unmap_single with frame size as the
length. This actually has 2 issues:
1. It is using a length to map and a different length to unmap.
2. When the unmap was happening, the data was sync for cpu but it could
be that this will overwrite what build_skb was initializing.
The fix for these two problems is to change the order of operations.
First to sync the frame for cpu, then to build the skb and in the end to
unmap using the correct size but without sync the frame again for cpu.
Fixes: c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Horatiu Vultur says:
====================
net: lan966x: Fixes for when MTU is changed
There were multiple problems in different parts of the driver when
the MTU was changed.
The first problem was that the HW was missing to configure the correct
value, it was missing ETH_HLEN and ETH_FCS_LEN. The second problem was
when vlan filtering was enabled/disabled, the MRU was not adjusted
corretly. While the last issue was that the FDMA was calculated wrongly
the correct maximum MTU.
====================
Link: https://lore.kernel.org/r/20221030213636.1031408-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When MTU is changed, FDMA is required to calculate what is the maximum
size of the frame that it can received. So it can calculate what is the
page order needed to allocate for the received frames.
The first problem was that, when the max MTU was calculated it was
reading the value from dev and not from HW, so in this way it was
missing L2 header + the FCS.
The other problem was that once the skb is created using
__build_skb_around, it would reserve some space for skb_shared_info.
So if we received a frame which size is at the limit of the page order
then the creating will failed because it would not have space to put all
the data.
Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vlan filtering is enabled/disabled, it is required to adjust the
maximum received frame size that it can received. When vlan filtering is
enabled, it would all to receive extra 4 bytes, that are the vlan tag.
So the maximum frame size would be 1522 with a vlan tag. If vlan
filtering is disabled then the maximum frame size would be 1518
regardless if there is or not a vlan tag.
Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MTU was changed, the lan966x didn't take in consideration
the L2 header and the FCS. So the HW was configured with a smaller
value than what was desired. Therefore the correct value to configure
the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN.
The vlan tag is not considered here, because at the time when the
blamed commit was added, there was no vlan filtering support. The
vlan fix will be part of the next patch.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull documentation fixes from Jonathan Corbet:
"Four small fixes for the docs tree"
* tag 'docs-6.1-fixes' of git://git.lwn.net/linux:
docs/process/howto: Replace C89 with C11
Documentation: Fix spelling mistake in hacking.rst
Documentation: process: replace outdated LTS table w/ link
tracing/histogram: Update document for KEYS_MAX size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a loop that occurs when using multiple net namespaces
* tag 'nfsd-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix net-namespace logic in __nfsd_file_cache_purge
|
|
If the namespace doesn't match the one in "net", then we'll continue,
but that doesn't cause another rhashtable_walk_next call, so it will
loop infinitely.
Fixes: ce502f81ba88 ("NFSD: Convert the filecache to use rhashtable")
Reported-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/ltp/Y1%2FP8gDAcWC%2F+VR3@pevik/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
"This contains a couple of fixes for string-function bugs"
* tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc/string: Fix memcmp() implementation
tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- fix use after free in exar driver
- spelling fix in comment
* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
drivers: watchdog: exar_wdt.c fix use after free
watchdog: sp805_wdt: fix spelling typo in comment
|
|
If an error occurs after the first kzalloc() the corresponding memory
allocation is never freed.
Add the missing kfree() in the error handling path, as already done in the
remove() function.
Fixes: 7e773594dada ("sfc: Separate efx_nic memory from net_device memory")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/dc114193121c52c8fa3779e49bdd99d4b41344a9.1667077009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
