summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-17mm/page_ref: add tracepoint to track down page reference manipulationJoonsoo Kim
CMA allocation should be guaranteed to succeed by definition, but, unfortunately, it would be failed sometimes. It is hard to track down the problem, because it is related to page reference manipulation and we don't have any facility to analyze it. This patch adds tracepoints to track down page reference manipulation. With it, we can find exact reason of failure and can fix the problem. Following is an example of tracepoint output. (note: this example is stale version that printing flags as the number. Recent version will print it as human readable string.) <...>-9018 [004] 92.678375: page_ref_set: pfn=0x17ac9 flags=0x0 count=1 mapcount=0 mapping=(nil) mt=4 val=1 <...>-9018 [004] 92.678378: kernel_stack: => get_page_from_freelist (ffffffff81176659) => __alloc_pages_nodemask (ffffffff81176d22) => alloc_pages_vma (ffffffff811bf675) => handle_mm_fault (ffffffff8119e693) => __do_page_fault (ffffffff810631ea) => trace_do_page_fault (ffffffff81063543) => do_async_page_fault (ffffffff8105c40a) => async_page_fault (ffffffff817581d8) [snip] <...>-9018 [004] 92.678379: page_ref_mod: pfn=0x17ac9 flags=0x40048 count=2 mapcount=1 mapping=0xffff880015a78dc1 mt=4 val=1 [snip] ... ... <...>-9131 [001] 93.174468: test_pages_isolated: start_pfn=0x17800 end_pfn=0x17c00 fin_pfn=0x17ac9 ret=fail [snip] <...>-9018 [004] 93.174843: page_ref_mod_and_test: pfn=0x17ac9 flags=0x40068 count=0 mapcount=0 mapping=0xffff880015a78dc1 mt=4 val=-1 ret=1 => release_pages (ffffffff8117c9e4) => free_pages_and_swap_cache (ffffffff811b0697) => tlb_flush_mmu_free (ffffffff81199616) => tlb_finish_mmu (ffffffff8119a62c) => exit_mmap (ffffffff811a53f7) => mmput (ffffffff81073f47) => do_exit (ffffffff810794e9) => do_group_exit (ffffffff81079def) => SyS_exit_group (ffffffff81079e74) => entry_SYSCALL_64_fastpath (ffffffff817560b6) This output shows that problem comes from exit path. In exit path, to improve performance, pages are not freed immediately. They are gathered and processed by batch. During this process, migration cannot be possible and CMA allocation is failed. This problem is hard to find without this page reference tracepoint facility. Enabling this feature bloat kernel text 30 KB in my configuration. text data bss dec hex filename 12127327 2243616 1507328 15878271 f2487f vmlinux_disabled 12157208 2258880 1507328 15923416 f2f8d8 vmlinux_enabled Note that, due to header file dependency problem between mm.h and tracepoint.h, this feature has to open code the static key functions for tracepoints. Proposed by Steven Rostedt in following link. https://lkml.org/lkml/2015/12/9/699 [arnd@arndb.de: crypto/async_pq: use __free_page() instead of put_page()] [iamjoonsoo.kim@lge.com: fix build failure for xtensa] [akpm@linux-foundation.org: tweak Kconfig text, per Vlastimil] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: introduce page reference manipulation functionsJoonsoo Kim
The success of CMA allocation largely depends on the success of migration and key factor of it is page reference count. Until now, page reference is manipulated by direct calling atomic functions so we cannot follow up who and where manipulate it. Then, it is hard to find actual reason of CMA allocation failure. CMA allocation should be guaranteed to succeed so finding offending place is really important. In this patch, call sites where page reference is manipulated are converted to introduced wrapper function. This is preparation step to add tracepoint to each page reference manipulation function. With this facility, we can easily find reason of CMA allocation failure. There is no functional change in this patch. In addition, this patch also converts reference read sites. It will help a second step that renames page._count to something else and prevents later attempt to direct access to it (Suggested by Andrew). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: thp: set THP defrag by default to madvise and add a stall-free defrag optionMel Gorman
THP defrag is enabled by default to direct reclaim/compact but not wake kswapd in the event of a THP allocation failure. The problem is that THP allocation requests potentially enter reclaim/compaction. This potentially incurs a severe stall that is not guaranteed to be offset by reduced TLB misses. While there has been considerable effort to reduce the impact of reclaim/compaction, it is still a high cost and workloads that should fit in memory fail to do so. Specifically, a simple anon/file streaming workload will enter direct reclaim on NUMA at least even though the working set size is 80% of RAM. It's been years and it's time to throw in the towel. First, this patch defines THP defrag as follows; madvise: A failed allocation will direct reclaim/compact if the application requests it never: Neither reclaim/compact nor wake kswapd defer: A failed allocation will wake kswapd/kcompactd always: A failed allocation will direct reclaim/compact (historical behaviour) khugepaged defrag will enter direct/reclaim but not wake kswapd. Next it sets the default defrag option to be "madvise" to only enter direct reclaim/compaction for applications that specifically requested it. Lastly, it removes a check from the page allocator slowpath that is related to __GFP_THISNODE to allow "defer" to work. The callers that really cares are slub/slab and they are updated accordingly. The slab one may be surprising because it also corrects a comment as kswapd was never woken up by that path. This means that a THP fault will no longer stall for most applications by default and the ideal for most users that get THP if they are immediately available. There are still options for users that prefer a stall at startup of a new application by either restoring historical behaviour with "always" or pick a half-way point with "defer" where kswapd does some of the work in the background and wakes kcompactd if necessary. THP defrag for khugepaged remains enabled and will enter direct/reclaim but no wakeup kswapd or kcompactd. After this patch a THP allocation failure will quickly fallback and rely on khugepaged to recover the situation at some time in the future. In some cases, this will reduce THP usage but the benefit of THP is hard to measure and not a universal win where as a stall to reclaim/compaction is definitely measurable and can be painful. The first test for this is using "usemem" to read a large file and write a large anonymous mapping (to avoid the zero page) multiple times. The total size of the mappings is 80% of RAM and the benchmark simply measures how long it takes to complete. It uses multiple threads to see if that is a factor. On UMA, the performance is almost identical so is not reported but on NUMA, we see this usemem 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Amean System-1 102.86 ( 0.00%) 46.81 ( 54.50%) Amean System-4 37.85 ( 0.00%) 34.02 ( 10.12%) Amean System-7 48.12 ( 0.00%) 46.89 ( 2.56%) Amean System-12 51.98 ( 0.00%) 56.96 ( -9.57%) Amean System-21 80.16 ( 0.00%) 79.05 ( 1.39%) Amean System-30 110.71 ( 0.00%) 107.17 ( 3.20%) Amean System-48 127.98 ( 0.00%) 124.83 ( 2.46%) Amean Elapsd-1 185.84 ( 0.00%) 105.51 ( 43.23%) Amean Elapsd-4 26.19 ( 0.00%) 25.58 ( 2.33%) Amean Elapsd-7 21.65 ( 0.00%) 21.62 ( 0.16%) Amean Elapsd-12 18.58 ( 0.00%) 17.94 ( 3.43%) Amean Elapsd-21 17.53 ( 0.00%) 16.60 ( 5.33%) Amean Elapsd-30 17.45 ( 0.00%) 17.13 ( 1.84%) Amean Elapsd-48 15.40 ( 0.00%) 15.27 ( 0.82%) For a single thread, the benchmark completes 43.23% faster with this patch applied with smaller benefits as the thread increases. Similar, notice the large reduction in most cases in system CPU usage. The overall CPU time is 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 User 10357.65 10438.33 System 3988.88 3543.94 Elapsed 2203.01 1634.41 Which is substantial. Now, the reclaim figures 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 128458477 278352931 Major Faults 2174976 225 Swap Ins 16904701 0 Swap Outs 17359627 0 Allocation stalls 43611 0 DMA allocs 0 0 DMA32 allocs 19832646 19448017 Normal allocs 614488453 580941839 Movable allocs 0 0 Direct pages scanned 24163800 0 Kswapd pages scanned 0 0 Kswapd pages reclaimed 0 0 Direct pages reclaimed 20691346 0 Compaction stalls 42263 0 Compaction success 938 0 Compaction failures 41325 0 This patch eliminates almost all swapping and direct reclaim activity. There is still overhead but it's from NUMA balancing which does not identify that it's pointless trying to do anything with this workload. I also tried the thpscale benchmark which forces a corner case where compaction can be used heavily and measures the latency of whether base or huge pages were used thpscale Fault Latencies 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Amean fault-base-1 5288.84 ( 0.00%) 2817.12 ( 46.73%) Amean fault-base-3 6365.53 ( 0.00%) 3499.11 ( 45.03%) Amean fault-base-5 6526.19 ( 0.00%) 4363.06 ( 33.15%) Amean fault-base-7 7142.25 ( 0.00%) 4858.08 ( 31.98%) Amean fault-base-12 13827.64 ( 0.00%) 10292.11 ( 25.57%) Amean fault-base-18 18235.07 ( 0.00%) 13788.84 ( 24.38%) Amean fault-base-24 21597.80 ( 0.00%) 24388.03 (-12.92%) Amean fault-base-30 26754.15 ( 0.00%) 19700.55 ( 26.36%) Amean fault-base-32 26784.94 ( 0.00%) 19513.57 ( 27.15%) Amean fault-huge-1 4223.96 ( 0.00%) 2178.57 ( 48.42%) Amean fault-huge-3 2194.77 ( 0.00%) 2149.74 ( 2.05%) Amean fault-huge-5 2569.60 ( 0.00%) 2346.95 ( 8.66%) Amean fault-huge-7 3612.69 ( 0.00%) 2997.70 ( 17.02%) Amean fault-huge-12 3301.75 ( 0.00%) 6727.02 (-103.74%) Amean fault-huge-18 6696.47 ( 0.00%) 6685.72 ( 0.16%) Amean fault-huge-24 8000.72 ( 0.00%) 9311.43 (-16.38%) Amean fault-huge-30 13305.55 ( 0.00%) 9750.45 ( 26.72%) Amean fault-huge-32 9981.71 ( 0.00%) 10316.06 ( -3.35%) The average time to fault pages is substantially reduced in the majority of caseds but with the obvious caveat that fewer THPs are actually used in this adverse workload 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Percentage huge-1 0.71 ( 0.00%) 14.04 (1865.22%) Percentage huge-3 10.77 ( 0.00%) 33.05 (206.85%) Percentage huge-5 60.39 ( 0.00%) 38.51 (-36.23%) Percentage huge-7 45.97 ( 0.00%) 34.57 (-24.79%) Percentage huge-12 68.12 ( 0.00%) 40.07 (-41.17%) Percentage huge-18 64.93 ( 0.00%) 47.82 (-26.35%) Percentage huge-24 62.69 ( 0.00%) 44.23 (-29.44%) Percentage huge-30 43.49 ( 0.00%) 55.38 ( 27.34%) Percentage huge-32 50.72 ( 0.00%) 51.90 ( 2.35%) 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 37429143 47564000 Major Faults 1916 1558 Swap Ins 1466 1079 Swap Outs 2936863 149626 Allocation stalls 62510 3 DMA allocs 0 0 DMA32 allocs 6566458 6401314 Normal allocs 216361697 216538171 Movable allocs 0 0 Direct pages scanned 25977580 17998 Kswapd pages scanned 0 3638931 Kswapd pages reclaimed 0 207236 Direct pages reclaimed 8833714 88 Compaction stalls 103349 5 Compaction success 270 4 Compaction failures 103079 1 Note again that while this does swap as it's an aggressive workload, the direct relcim activity and allocation stalls is substantially reduced. There is some kswapd activity but ftrace showed that the kswapd activity was due to normal wakeups from 4K pages being allocated. Compaction-related stalls and activity are almost eliminated. I also tried the stutter benchmark. For this, I do not have figures for NUMA but it's something that does impact UMA so I'll report what is available stutter 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Min mmap 7.3571 ( 0.00%) 7.3438 ( 0.18%) 1st-qrtle mmap 7.5278 ( 0.00%) 17.9200 (-138.05%) 2nd-qrtle mmap 7.6818 ( 0.00%) 21.6055 (-181.25%) 3rd-qrtle mmap 11.0889 ( 0.00%) 21.8881 (-97.39%) Max-90% mmap 27.8978 ( 0.00%) 22.1632 ( 20.56%) Max-93% mmap 28.3202 ( 0.00%) 22.3044 ( 21.24%) Max-95% mmap 28.5600 ( 0.00%) 22.4580 ( 21.37%) Max-99% mmap 29.6032 ( 0.00%) 25.5216 ( 13.79%) Max mmap 4109.7289 ( 0.00%) 4813.9832 (-17.14%) Mean mmap 12.4474 ( 0.00%) 19.3027 (-55.07%) This benchmark is trying to fault an anonymous mapping while there is a heavy IO load -- a scenario that desktop users used to complain about frequently. This shows a mix because the ideal case of mapping with THP is not hit as often. However, note that 99% of the mappings complete 13.79% faster. The CPU usage here is particularly interesting 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 User 67.50 0.99 System 1327.88 91.30 Elapsed 2079.00 2128.98 And once again we look at the reclaim figures 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 335241922 1314582827 Major Faults 715 819 Swap Ins 0 0 Swap Outs 0 0 Allocation stalls 532723 0 DMA allocs 0 0 DMA32 allocs 1822364341 1177950222 Normal allocs 1815640808 1517844854 Movable allocs 0 0 Direct pages scanned 21892772 0 Kswapd pages scanned 20015890 41879484 Kswapd pages reclaimed 19961986 41822072 Direct pages reclaimed 21892741 0 Compaction stalls 1065755 0 Compaction success 514 0 Compaction failures 1065241 0 Allocation stalls and all direct reclaim activity is eliminated as well as compaction-related stalls. THP gives impressive gains in some cases but only if they are quickly available. We're not going to reach the point where they are completely free so lets take the costs out of the fast paths finally and defer the cost to kswapd, kcompactd and khugepaged where it belongs. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, mempool: only set __GFP_NOMEMALLOC if there are free elementsDavid Rientjes
If an oom killed thread calls mempool_alloc(), it is possible that it'll loop forever if there are no elements on the freelist since __GFP_NOMEMALLOC prevents it from accessing needed memory reserves in oom conditions. Only set __GFP_NOMEMALLOC if there are elements on the freelist. If there are no free elements, allow allocations without the bit set so that memory reserves can be accessed if needed. Additionally, using mempool_alloc() with __GFP_NOMEMALLOC is not supported since the implementation can loop forever without accessing memory reserves when needed. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: remove unnecessary description about a non-exist gfp flagSatoru Takeuchi
Since __GFP_NOACCOUNT was removed by commit 20b5c3039863 ("Revert 'gfp: add __GFP_NOACCOUNT'"), its description is not necessary. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: scale kswapd watermarks in proportion to memoryJohannes Weiner
In machines with 140G of memory and enterprise flash storage, we have seen read and write bursts routinely exceed the kswapd watermarks and cause thundering herds in direct reclaim. Unfortunately, the only way to tune kswapd aggressiveness is through adjusting min_free_kbytes - the system's emergency reserves - which is entirely unrelated to the system's latency requirements. In order to get kswapd to maintain a 250M buffer of free memory, the emergency reserves need to be set to 1G. That is a lot of memory wasted for no good reason. On the other hand, it's reasonable to assume that allocation bursts and overall allocation concurrency scale with memory capacity, so it makes sense to make kswapd aggressiveness a function of that as well. Change the kswapd watermark scale factor from the currently fixed 25% of the tunable emergency reserve to a tunable 0.1% of memory. Beyond 1G of memory, this will produce bigger watermark steps than the current formula in default settings. Ensure that the new formula never chooses steps smaller than that, i.e. 25% of the emergency reserve. On a 140G machine, this raises the default watermark steps - the distance between min and low, and low and high - from 16M to 143M. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: cleanup *pte_alloc* interfacesKirill A. Shutemov
There are few things about *pte_alloc*() helpers worth cleaning up: - 'vma' argument is unused, let's drop it; - most __pte_alloc() callers do speculative check for pmd_none(), before taking ptl: let's introduce pte_alloc() macro which does the check. The only direct user of __pte_alloc left is userfaultfd, which has different expectation about atomicity wrt pmd. - pte_alloc_map() and pte_alloc_map_lock() are redefined using pte_alloc(). [sudeep.holla@arm.com: fix build for arm64 hugetlbpage] [sfr@canb.auug.org.au: fix arch/arm/mm/mmu.c some more] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17virtio_balloon: export 'available' memory to balloon statisticsIgor Redko
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory statistics protocol, corresponding to 'Available' in /proc/meminfo. It indicates to the hypervisor how big the balloon can be inflated without pushing the guest system to swap. Signed-off-by: Igor Redko <redkoi@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm/page_alloc.c: calculate 'available' memory in a separate functionIgor Redko
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory statistics protocol, corresponding to 'Available' in /proc/meminfo. It indicates to the hypervisor how big the balloon can be inflated without pushing the guest system to swap. This metric would be very useful in VM orchestration software to improve memory management of different VMs under overcommit. This patch (of 2): Factor out calculation of the available memory counter into a separate exportable function, in order to be able to use it in other parts of the kernel. In particular, it appears a relevant metric to report to the hypervisor via virtio-balloon statistics interface (in a followup patch). Signed-off-by: Igor Redko <redkoi@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm/Kconfig: remove redundant arch depend for memory hotplugYang Shi
MEMORY_HOTPLUG already depends on ARCH_ENABLE_MEMORY_HOTPLUG which is selected by the supported architectures, so the following arch depend is unnecessary. Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17ARC, thp: remove infrastructure for handling splitting PMDsVineet Gupta
With THP refcounting work, no need to mark PMDs splitting. (ARC got missed under the sweeping arch change as THP support was likely not present in orig baseline) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm/thp/migration: switch from flush_tlb_range to flush_pmd_tlb_rangeAneesh Kumar K.V
We remove one instace of flush_tlb_range here. That was added by commit f714f4f20e59 ("mm: numa: call MMU notifiers on THP migration"). But the pmdp_huge_clear_flush_notify should have done the require flush for us. Hence remove the extra flush. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, tracing: refresh __def_vmaflag_namesKirill A. Shutemov
Get list of VMA flags up-to-date and sort it to match VM_* definition order. [vbabka@suse.cz: add a note above vmaflag definitions to update the names when changing] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: deduplicate memory overcommitment codeAndrey Ryabinin
Currently we have two copies of the same code which implements memory overcommitment logic. Let's move it into mm/util.c and hence avoid duplication. No functional changes here. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: move max_map_count bits into mm.hAndrey Ryabinin
max_map_count sysctl unrelated to scheduler. Move its bits from include/linux/sched/sysctl.h to include/linux/mm.h. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17thp, vmstats: count deferred split eventsKirill A. Shutemov
Count how many times we put a THP in split queue. Currently, it happens on partial unmap of a THP. Rapidly growing value can indicate that an application behaves unfriendly wrt THP: often fault in huge page and then unmap part of it. This leads to unnecessary memory fragmentation and the application may require tuning. The event also can help with debugging kernel [mis-]behaviour. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: workingset: make shadow node shrinker memcg awareVladimir Davydov
Workingset code was recently made memcg aware, but shadow node shrinker is still global. As a result, one small cgroup can consume all memory available for shadow nodes, possibly hurting other cgroups by reclaiming their shadow nodes, even though reclaim distances stored in its shadow nodes have no effect. To avoid this, we need to make shadow node shrinker memcg aware. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: workingset: size shadow nodes lru basing on file cache sizeVladimir Davydov
A page is activated on refault if the refault distance stored in the corresponding shadow entry is less than the number of active file pages. Since active file pages can't occupy more than half memory, we assume that the maximal effective refault distance can't be greater than half the number of present pages and size the shadow nodes lru list appropriately. Generally speaking, this assumption is correct, but it can result in wasting a considerable chunk of memory on stale shadow nodes in case the portion of file pages is small, e.g. if a workload mostly uses anonymous memory. To sort this out, we need to compute the size of shadow nodes lru basing not on the maximal possible, but the current size of file cache. We could take the size of active file lru for the maximal refault distance, but active lru is pretty unstable - it can shrink dramatically at runtime possibly disrupting workingset detection logic. Instead we assume that the maximal refault distance equals half the total number of file cache pages. This will protect us against active file lru size fluctuations while still being correct, because size of active lru is normally maintained lower than size of inactive lru. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17radix-tree: account radix_tree_node to memory cgroupVladimir Davydov
Allocation of radix_tree_node objects can be easily triggered from userspace, so we should account them to memory cgroup. Besides, we need them accounted for making shadow node shrinker per memcg (see mm/workingset.c). A tricky thing about accounting radix_tree_node objects is that they are mostly allocated through radix_tree_preload(), so we can't just set SLAB_ACCOUNT for radix_tree_node_cachep - that would likely result in a lot of unrelated cgroups using objects from each other's caches. One way to overcome this would be making radix tree preloads per memcg, but that would probably look cumbersome and overcomplicated. Instead, we make radix_tree_node_alloc() first try to allocate from the cache with __GFP_ACCOUNT, no matter if the caller has preloaded or not, and only if it fails fall back on using per cpu preloads. This should make most allocations accounted. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: zap memcg_kmem_online helperVladimir Davydov
As kmem accounting is now either enabled for all cgroups or disabled system-wide, there's no point in having memcg_kmem_online() helper - instead one can use memcg_kmem_enabled() and mem_cgroup_online(), as shrink_slab() now does. There are only two places left where this helper is used - __memcg_kmem_charge() and memcg_create_kmem_cache(). The former can only be called if memcg_kmem_enabled() returned true. Since the cgroup it operates on is online, mem_cgroup_is_root() check will be enough. memcg_create_kmem_cache() can't use mem_cgroup_online() helper instead of memcg_kmem_online(), because it relies on the fact that in memcg_offline_kmem() memcg->kmem_state is changed before memcg_deactivate_kmem_caches() is called, but there we can just open-code the check. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: vmscan: pass root_mem_cgroup instead of NULL to memcg aware shrinkerVladimir Davydov
It's just convenient to implement a memcg aware shrinker when you know that shrink_control->memcg != NULL unless memcg_kmem_enabled() returns false. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: enable kmem accounting for all cgroups in the legacy hierarchyVladimir Davydov
Workingset code was recently made memcg aware, but shadow node shrinker is still global. As a result, one small cgroup can consume all memory available for shadow nodes, possibly hurting other cgroups by reclaiming their shadow nodes, even though reclaim distances stored in its shadow nodes have no effect. To avoid this, we need to make shadow node shrinker memcg aware. The actual work is done in patch 6 of the series. Patches 1 and 2 prepare memcg/shrinker infrastructure for the change. Patch 3 is just a collateral cleanup. Patch 4 makes radix_tree_node accounted, which is necessary for making shadow node shrinker memcg aware. Patch 5 reduces shadow nodes overhead in case workload mostly uses anonymous pages. This patch: Currently, in the legacy hierarchy kmem accounting is off for all cgroups by default and must be enabled explicitly by writing something to memory.kmem.limit_in_bytes. Since we don't support reclaim on hitting kmem limit, nor do we have any plans to implement it, this is likely to be -1, just to enable kmem accounting and limit kernel memory consumption by the memory.limit_in_bytes along with user memory. This user API was introduced when the implementation of kmem accounting lacked slab shrinker support and hence was useless in practice. Things have changed since then - slab shrinkers were made memcg aware, the accounting overhead seems to be negligible, and a failure to charge a kmem allocation should not have critical consequences, because we only account those kernel objects that should be safe to fail. That's why kmem accounting is enabled by default for all cgroups in the default hierarchy, which will eventually replace the legacy one. The ability to enable kmem accounting for some cgroups while keeping it disabled for others is getting difficult to maintain. E.g. to make shadow node shrinker memcg aware (see mm/workingset.c), we need to know the relationship between the number of shadow nodes allocated for a cgroup and the size of its lru list. If kmem accounting is enabled for all cgroups there is no problem, but what should we do if kmem accounting is enabled only for half of cgroups? We've no other choice but use global lru stats while scanning root cgroup's shadow nodes, but that would be wrong if kmem accounting was enabled for all cgroups (which is the case if the unified hierarchy is used), in which case we should use lru stats of the root cgroup's lruvec. That being said, let's enable kmem accounting for all memory cgroups by default. If one finds it unstable or too costly, it can always be disabled system-wide by passing cgroup.memory=nokmem to the kernel at boot time. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17include/linux/page-flags.h: force inlining of selected page flag modificationsDenys Vlasenko
Sometimes gcc mysteriously doesn't inline very small functions we expect to be inlined. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 With this .config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os, the following functions get deinlined many times. Examples of disassembly: <SetPageUptodate> (43 copies, 141 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 0f 08 lock orb $0x8,(%rdi) 5d pop %rbp c3 retq <PagePrivate> (10 copies, 134 calls): 48 8b 07 mov (%rdi),%rax 55 push %rbp 48 89 e5 mov %rsp,%rbp 48 c1 e8 0b shr $0xb,%rax 83 e0 01 and $0x1,%eax 5d pop %rbp c3 retq This patch fixes this via s/inline/__always_inline/. Code size decrease after the patch is ~7k: text data bss dec hex filename 92125002 20826048 36417536 149368586 8e72f0a vmlinux 92118087 20826112 36417536 149361735 8e71447 vmlinux7_pageops_after Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17bufferhead: force inlining of buffer head flag operationsDenys Vlasenko
With both gcc 4.7.2 and 4.9.2, sometimes gcc mysteriously doesn't inline very small functions we expect to be inlined. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 With this .config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os, set_buffer_foo(), clear_buffer_foo() and similar functions get deinlined about 60 times. Examples of disassembly: <set_buffer_mapped> (14 copies, 43 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 0f 20 lock orb $0x20,(%rdi) 5d pop %rbp c3 retq <buffer_mapped> (3 copies, 34 calls): 48 8b 07 mov (%rdi),%rax 55 push %rbp 48 89 e5 mov %rsp,%rbp 48 c1 e8 05 shr $0x5,%rax 83 e0 01 and $0x1,%eax 5d pop %rbp c3 retq <set_buffer_new> (5 copies, 13 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 0f 40 lock orb $0x40,(%rdi) 5d pop %rbp c3 retq This patch fixes this via s/inline/__always_inline/. This decreases vmlinux by about 3 kbytes. text data bss dec hex filename 88200439 19905208 36421632 144527279 89d4faf vmlinux2 88197239 19905240 36421632 144524111 89d434f vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17tools/vm/page-types.c: add memory cgroup dumping and filteringKonstantin Khlebnikov
This adds two command line keys: -c|--cgroup path|@inode Walk only pages owned by this memory cgroup -C|--list-cgroup Show memory cgroup inodes [vdavydov@virtuozzo.com: opt_cgroup should be uint64_t. Fix conflicts with "tools/vm/page-types.c: support swap entry"] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, kswapd: replace kswapd compaction with waking up kcompactdVlastimil Babka
Similarly to direct reclaim/compaction, kswapd attempts to combine reclaim and compaction to attempt making memory allocation of given order available. The details differ from direct reclaim e.g. in having high watermark as a goal. The code involved in kswapd's reclaim/compaction decisions has evolved to be quite complex. Testing reveals that it doesn't actually work in at least one scenario, and closer inspection suggests that it could be greatly simplified without compromising on the goal (make high-order page available) or efficiency (don't reclaim too much). The simplification relieas of doing all compaction in kcompactd, which is simply woken up when high watermarks are reached by kswapd's reclaim. The scenario where kswapd compaction doesn't work was found with mmtests test stress-highalloc configured to attempt order-9 allocations without direct reclaim, just waking up kswapd. There was no compaction attempt from kswapd during the whole test. Some added instrumentation shows what happens: - balance_pgdat() sets end_zone to Normal, as it's not balanced - reclaim is attempted on DMA zone, which sets nr_attempted to 99, but it cannot reclaim anything, so sc.nr_reclaimed is 0 - for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so it merely checks if high watermarks were reached for base pages. This is true, so no reclaim is attempted. For DMA, testorder=0 wasn't used, as compaction_suitable() returned COMPACT_SKIPPED - even though the pgdat_needs_compaction flag wasn't set to false, no compaction happens due to the condition sc.nr_reclaimed > nr_attempted being false (as 0 < 99) - priority-- due to nr_reclaimed being 0, repeat until priority reaches 0 pgdat_balanced() is false as only the small zone DMA appears balanced (curiously in that check, watermark appears OK and compaction_suitable() returns COMPACT_PARTIAL, because a lower classzone_idx is used there) Now, even if it was decided that reclaim shouldn't be attempted on the DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 > nr_attempted=0) is also false. The condition really should use >= as the comment suggests. Then there is a mismatch in the check for setting pgdat_needs_compaction to false using low watermark, while the rest uses high watermark, and who knows what other subtlety. Hopefully this demonstrates that this is unsustainable. Luckily we can simplify this a lot. The reclaim/compaction decisions make sense for direct reclaim scenario, but in kswapd, our primary goal is to reach high watermark in order-0 pages. Afterwards we can attempt compaction just once. Unlike direct reclaim, we don't reclaim extra pages (over the high watermark), the current code already disallows it for good reasons. After this patch, we simply wake up kcompactd to process the pgdat, after we have either succeeded or failed to reach the high watermarks in kswapd, which goes to sleep. We pass kswapd's order and classzone_idx, so kcompactd can apply the same criteria to determine which zones are worth compacting. Note that we use the classzone_idx from wakeup_kswapd(), not balanced_classzone_idx which can include higher zones that kswapd tried to balance too, but didn't consider them in pgdat_balanced(). Since kswapd now cannot create high-order pages itself, we need to adjust how it determines the zones to be balanced. The key element here is adding a "highorder" parameter to zone_balanced, which, when set to false, makes it consider only order-0 watermark instead of the desired higher order (this was done previously by kswapd_shrink_zone(), but not elsewhere). This false is passed for example in pgdat_balanced(). Importantly, wakeup_kswapd() uses true to make sure kswapd and thus kcompactd are woken up for a high-order allocation failure. The last thing is to decide what to do with pageblock_skip bitmap handling. Compaction maintains a pageblock_skip bitmap to record pageblocks where isolation recently failed. This bitmap can be reset by three ways: 1) direct compaction is restarting after going through the full deferred cycle 2) kswapd goes to sleep, and some other direct compaction has previously finished scanning the whole zone and set zone->compact_blockskip_flush. Note that a successful direct compaction clears this flag. 3) compaction was invoked manually via trigger in /proc The case 2) is somewhat fuzzy to begin with, but after introducing kcompactd we should update it. The check for direct compaction in 1), and to set the flush flag in 2) use current_is_kswapd(), which doesn't work for kcompactd. Thus, this patch adds bool direct_compaction to compact_control to use in 2). For the case 1) we remove the check completely - unlike the former kswapd compaction, kcompactd does use the deferred compaction functionality, so flushing tied to restarting from deferred compaction makes sense here. Note that when kswapd goes to sleep, kcompactd is woken up, so it will see the flushed pageblock_skip bits. This is different from when the former kswapd compaction observed the bits and I believe it makes more sense. Kcompactd can afford to be more thorough than a direct compaction trying to limit allocation latency, or kswapd whose primary goal is to reclaim. For testing, I used stress-highalloc configured to do order-9 allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in phases 1 and 2 work as usual): stress-highalloc 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%) Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%) Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%) Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%) Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%) Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%) Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%) User 3166.67 3181.09 System 1153.37 1158.25 Elapsed 1768.53 1799.37 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Direct pages scanned 32938 32797 Kswapd pages scanned 2183166 2202613 Kswapd pages reclaimed 2152359 2143524 Direct pages reclaimed 32735 32545 Percentage direct scans 1% 1% THP fault alloc 579 612 THP collapse alloc 304 316 THP splits 0 0 THP fault fallback 793 778 THP collapse fail 11 16 Compaction stalls 1013 1007 Compaction success 92 67 Compaction failures 920 939 Page migrate success 238457 721374 Page migrate failure 23021 23469 Compaction pages isolated 504695 1479924 Compaction migrate scanned 661390 8812554 Compaction free scanned 13476658 84327916 Compaction cost 262 838 After this patch we see improvements in allocation success rate (especially for phase 3) along with increased compaction activity. The compaction stalls (direct compaction) in the interfering kernel builds (probably THP's) also decreased somewhat thanks to kcompactd activity, yet THP alloc successes improved a bit. Note that elapsed and user time isn't so useful for this benchmark, because of the background interference being unpredictable. It's just to quickly spot some major unexpected differences. System time is somewhat more useful and that didn't increase. Also (after adjusting mmtests' ftrace monitor): Time kswapd awake 2547781 2269241 Time kcompactd awake 0 119253 Time direct compacting 939937 557649 Time kswapd compacting 0 0 Time kcompactd compacting 0 119099 The decrease of overal time spent compacting appears to not match the increased compaction stats. I suspect the tasks get rescheduled and since the ftrace monitor doesn't see that, the reported time is wall time, not CPU time. But arguably direct compactors care about overall latency anyway, whether busy compacting or waiting for CPU doesn't matter. And that latency seems to almost halved. It's also interesting how much time kswapd spent awake just going through all the priorities and failing to even try compacting, over and over. We can also configure stress-highalloc to perform both direct reclaim/compaction and wakeup kswapd/kcompactd, by using GFP_KERNEL|__GFP_HIGH|__GFP_COMP: stress-highalloc 4.5-rc1+before 4.5-rc1+after -direct -direct Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%) Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%) Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%) Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%) Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%) Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%) Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%) User 3344.73 3246.04 System 1194.24 1172.29 Elapsed 1838.04 1836.76 4.5-rc1+before 4.5-rc1+after -direct -direct Direct pages scanned 125146 120966 Kswapd pages scanned 2119757 2135012 Kswapd pages reclaimed 2073183 2108388 Direct pages reclaimed 124909 120577 Percentage direct scans 5% 5% THP fault alloc 599 652 THP collapse alloc 323 354 THP splits 0 0 THP fault fallback 806 793 THP collapse fail 17 16 Compaction stalls 2457 2025 Compaction success 906 518 Compaction failures 1551 1507 Page migrate success 2031423 2360608 Page migrate failure 32845 40852 Compaction pages isolated 4129761 4802025 Compaction migrate scanned 11996712 21750613 Compaction free scanned 214970969 344372001 Compaction cost 2271 2694 In this scenario, this patch doesn't change the overall success rate as direct compaction already tries all it can. There's however significant reduction in direct compaction stalls (that is, the number of allocations that went into direct compaction). The number of successes (i.e. direct compaction stalls that ended up with successful allocation) is reduced by the same number. This means the offload to kcompactd is working as expected, and direct compaction is reduced either due to detecting contention, or compaction deferred by kcompactd. In the previous version of this patchset there was some apparent reduction of success rate, but the changes in this version (such as using sync compaction only), new baseline kernel, and/or averaging results from 5 executions (my bet), made this go away. Ftrace-based stats seem to roughly agree: Time kswapd awake 2532984 2326824 Time kcompactd awake 0 257916 Time direct compacting 864839 735130 Time kswapd compacting 0 0 Time kcompactd compacting 0 257585 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, memory hotplug: small cleanup in online_pages()Vlastimil Babka
We can reuse the nid we've determined instead of repeated pfn_to_nid() usages. Also zone_to_nid() should be a bit cheaper in general than pfn_to_nid(). Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, compaction: introduce kcompactdVlastimil Babka
Memory compaction can be currently performed in several contexts: - kswapd balancing a zone after a high-order allocation failure - direct compaction to satisfy a high-order allocation, including THP page fault attemps - khugepaged trying to collapse a hugepage - manually from /proc The purpose of compaction is two-fold. The obvious purpose is to satisfy a (pending or future) high-order allocation, and is easy to evaluate. The other purpose is to keep overal memory fragmentation low and help the anti-fragmentation mechanism. The success wrt the latter purpose is more The current situation wrt the purposes has a few drawbacks: - compaction is invoked only when a high-order page or hugepage is not available (or manually). This might be too late for the purposes of keeping memory fragmentation low. - direct compaction increases latency of allocations. Again, it would be better if compaction was performed asynchronously to keep fragmentation low, before the allocation itself comes. - (a special case of the previous) the cost of compaction during THP page faults can easily offset the benefits of THP. - kswapd compaction appears to be complex, fragile and not working in some scenarios. It could also end up compacting for a high-order allocation request when it should be reclaiming memory for a later order-0 request. To improve the situation, we should be able to benefit from an equivalent of kswapd, but for compaction - i.e. a background thread which responds to fragmentation and the need for high-order allocations (including hugepages) somewhat proactively. One possibility is to extend the responsibilities of kswapd, which could however complicate its design too much. It should be better to let kswapd handle reclaim, as order-0 allocations are often more critical than high-order ones. Another possibility is to extend khugepaged, but this kthread is a single instance and tied to THP configs. This patch goes with the option of a new set of per-node kthreads called kcompactd, and lays the foundations, without introducing any new tunables. The lifecycle mimics kswapd kthreads, including the memory hotplug hooks. For compaction, kcompactd uses the standard compaction_suitable() and ompact_finished() criteria and the deferred compaction functionality. Unlike direct compaction, it uses only sync compaction, as there's no allocation latency to minimize. This patch doesn't yet add a call to wakeup_kcompactd. The kswapd compact/reclaim loop for high-order pages will be replaced by waking up kcompactd in the next patch with the description of what's wrong with the old approach. Waking up of the kcompactd threads is also tied to kswapd activity and follows these rules: - we don't want to affect any fastpaths, so wake up kcompactd only from the slowpath, as it's done for kswapd - if kswapd is doing reclaim, it's more important than compaction, so don't invoke kcompactd until kswapd goes to sleep - the target order used for kswapd is passed to kcompactd Future possible future uses for kcompactd include the ability to wake up kcompactd on demand in special situations, such as when hugepages are not available (currently not done due to __GFP_NO_KSWAPD) or when a fragmentation event (i.e. __rmqueue_fallback()) occurs. It's also possible to perform periodic compaction with kcompactd. [arnd@arndb.de: fix build errors with kcompactd] [paul.gortmaker@windriver.com: don't use modular references for non modular code] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm, kswapd: remove bogus check of balance_classzone_idxVlastimil Babka
During work on kcompactd integration I have spotted a confusing check of balance_classzone_idx, which I believe is bogus. The balanced_classzone_idx is filled by balance_pgdat() as the highest zone it attempted to balance. This was introduced by commit dc83edd941f4 ("mm: kswapd: use the classzone idx that kswapd was using for sleeping_prematurely()"). The intention is that (as expressed in today's function names), the value used for kswapd_shrink_zone() calls in balance_pgdat() is the same as for the decisions in kswapd_try_to_sleep(). An unwanted side-effect of that commit was breaking the checks in kswapd() whether there was another kswapd_wakeup with a tighter (=lower) classzone_idx. Commits 215ddd6664ce ("mm: vmscan: only read new_classzone_idx from pgdat when reclaiming successfully") and d2ebd0f6b895 ("kswapd: avoid unnecessary rebalance after an unsuccessful balancing") tried to fixed, but apparently introduced a bogus check that this patch removes. Consider zone indexes X < Y < Z, where: - Z is the value used for the first kswapd wakeup. - Y is returned as balanced_classzone_idx, which means zones with index higher than Y (including Z) were found to be unreclaimable. - X is the value used for the second kswapd wakeup The new wakeup with value X means that kswapd is now supposed to balance harder all zones with index <= X. But instead, due to Y < Z, it will go sleep and won't read the new value X. This is subtly wrong. The effect of this patch is that kswapd will react better in some situations, where e.g. the first wakeup is for ZONE_DMA32, the second is for ZONE_DMA, and due to unreclaimable ZONE_NORMAL. Before this patch, kswapd would go sleep instead of reclaiming ZONE_DMA harder. I expect these situations are very rare, and more value is in better maintainability due to the removal of confusing and bogus check. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17tile: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim
We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17powerpc: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim
We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17sound: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim
We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. [akpm@linux-foundation.org: export _debug_pagealloc_enabled to modules] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm/slub: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim
We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. [akpm@linux-foundation.org: clean up code, per Christian] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm/vmalloc: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim
As CONFIG_DEBUG_PAGEALLOC can be enabled/disabled via kernel parameters we can optimize some cases by checking the enablement state. This is follow-up work for Christian's Optimize CONFIG_DEBUG_PAGEALLOC: https://lkml.org/lkml/2016/1/27/194 Remaining work is to make sparc to be aware of this but it looks not easy for me so I skip that in this series. This patch (of 5): We can disable debug_pagealloc processing even if the code is complied with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. [akpm@linux-foundation.org: update comment, per David. Adjust comment to use 80 cols] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17tools/vm/page-types.c: support swap entryNaoya Horiguchi
/proc/pid/pagemap (pte_to_pagemap_entry() internally) already reports about swap entry, so let's make the in-kernel utility aware of it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17/proc/kpageflags: return KPF_SLAB for slab tail pagesNaoya Horiguchi
Currently /proc/kpageflags returns just KPF_COMPOUND_TAIL for slab tail pages, which is inconvenient when grasping how slab pages are distributed (userspace always needs to check which kind of tail pages by itself). This patch sets KPF_SLAB for such pages. With this patch: $ grep Slab /proc/meminfo ; tools/vm/page-types -b slab Slab: 64880 kB flags page-count MB symbolic-flags long-symbolic-flags 0x0000000000000080 16220 63 _______S__________________________________ slab total 16220 63 16220 pages equals to 64880 kB, so returned result is consistent with the global counter. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17/proc/kpageflags: return KPF_BUDDY for "tail" buddy pagesNaoya Horiguchi
Currently /proc/kpageflags returns nothing for "tail" buddy pages, which is inconvenient when grasping how free pages are distributed. This patch sets KPF_BUDDY for such pages. With this patch: $ grep MemFree /proc/meminfo ; tools/vm/page-types -b buddy MemFree: 3134992 kB flags page-count MB symbolic-flags long-symbolic-flags 0x0000000000000400 779272 3044 __________B_______________________________ buddy 0x0000000000000c00 4385 17 __________BM______________________________ buddy,mmap total 783657 3061 783657 pages is 3134628 kB (roughly consistent with the global counter,) so it's OK. [akpm@linux-foundation.org: update comment, per Naoya] Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: report kernel stack usage in cgroup2 memory.statVladimir Davydov
Show how much memory is allocated to kernel stacks. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: report slab usage in cgroup2 memory.statVladimir Davydov
Show how much memory is used for storing reclaimable and unreclaimable in-kernel data structures allocated from slab caches. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: make tree_{stat,events} fetch all statsVladimir Davydov
Currently, tree_{stat,events} helpers can only get one stat index at a time, so when there are a lot of stats to be reported one has to call it over and over again (see memory_stat_show). This is neither effective, nor does it look good. Instead, let's make these helpers take a snapshot of all available counters. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: memcontrol: do not bypass slab charge if memcg is offlineVladimir Davydov
Slab pages are charged in two steps. First, an appropriate per memcg cache is selected (see memcg_kmem_get_cache) basing on the current context, then the new slab page is charged to the memory cgroup which the selected cache was created for (see memcg_charge_slab -> __memcg_kmem_charge_memcg). It is OK to bypass kmemcg charge at step 1, but if step 1 succeeded and we successfully allocated a new slab page, step 2 must be performed, otherwise we would get a per memcg kmem cache which contains a slab that does not hold a reference to the memory cgroup owning the cache. Since per memcg kmem caches are destroyed on memcg css free, this could result in freeing a cache while there are still active objects in it. However, currently we will bypass slab page charge if the memory cgroup owning the cache is offline (see __memcg_kmem_charge_memcg). This is very unlikely to occur in practice, because for this to happen a process must be migrated to a different cgroup and the old cgroup must be removed while the process is in kmalloc somewhere between steps 1 and 2 (e.g. trying to allocate a new page). Nevertheless, it's still better to eliminate such a possibility. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: oom_kill: don't ignore oom score on exiting tasksJohannes Weiner
When the OOM killer scans tasks and encounters a PF_EXITING one, it force-selects that task regardless of the score. The problem is that if that task got stuck waiting for some state the allocation site is holding, the OOM reaper can not move on to the next best victim. Frankly, I don't even know why we check for exiting tasks in the OOM killer. We've tried direct reclaim at least 15 times by the time we decide the system is OOM, there was plenty of time to exit and free memory; and a task might exit voluntarily right after we issue a kill. This is testing pure noise. Remove it. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17watchdog: don't run proc_watchdog_update if new value is same as oldJoshua Hunt
While working on a script to restore all sysctl params before a series of tests I found that writing any value into the /proc/sys/kernel/{nmi_watchdog,soft_watchdog,watchdog,watchdog_thresh} causes them to call proc_watchdog_update(). NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. There doesn't appear to be a reason for doing this work every time a write occurs, so only do it when the values change. Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: <stable@vger.kernel.org> [4.1.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17drivers/firmware/broadcom/bcm47xx_nvram.c: fix incorrect __ioread32_copyAaro Koskinen
Commit 1f330c327900 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use __ioread32_copy() instead of open-coding") switched to use a generic copy function, but failed to notice that the header pointer is updated between the two copies, resulting in bogus data being copied in the latter one. Fix by keeping the old header pointer. The patch fixes totally broken networking on WRT54GL router (both LAN and WLAN interfaces fail to probe). Fixes: 1f330c327900 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use __ioread32_copy() instead of open-coding") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> [4.4.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17ia64: define ioremap_uc()Luis R. Rodriguez
All architectures now need ioremap_uc(), ia64 seems defines this already through its ioremap_nocache() and it already ensures it *only* uses UC. This is needed since v4.3 to complete an allyesconfig compile on ia64, there were others archs that needed this, and this one seems to have fallen through the cracks. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16Merge tag 'fbdev-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - Miscallaneous small fixes to various fbdev drivers - Remove fb_rotate, which was never used - pmag fb improvements * tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (21 commits) xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND" video: fbdev: sis: remove unused variable drivers/video: make fbdev/sunxvr2500.c explicitly non-modular drivers/video: make fbdev/sunxvr1000.c explicitly non-modular drivers/video: make fbdev/sunxvr500.c explicitly non-modular video: exynos: fix modular build fbdev: da8xx-fb: fix videomodes of lcd panels fbdev: kill fb_rotate video: fbdev: bt431: Correct cursor format control macro video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressing video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handling video: fbdev: bt455: Remove unneeded colormap helpers for cursor support video: fbdev: pmag-aa-fb: Report video timings video: fbdev: pmag-aa-fb: Enable building as a module video: fbdev: pmag-aa-fb: Adapt to current APIs video: fbdev: pmag-ba-fb: Fix the lower margin size fbdev: sh_mobile_lcdc: Use ARCH_RENESAS fbdev: n411: check return value fbdev: exynos: fix IS_ERR_VALUE usage video: Use bool instead int pointer for get_opt_bool() argument ...
2016-03-16Merge tag 'media/v4.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Added support for some new video formats - mn88473 DVB frontend driver got promoted from staging - several improvements at the VSP1 driver - several cleanups and improvements at the Media Controller - added Media Controller support to snd-usb-audio. Currently, enabled only for au0828-based V4L2/DVB boards - Several improvements at nuvoton-cir: it now supports wake up codes - Add media controller support to em28xx and saa7134 drivers - coda driver now accepts NXP distributed firmware files - Some legacy SoC camera drivers will be moving to staging, as they're outdated and nobody so far is willing to fix and convert them to use the current media framework - As usual, lots of cleanups, improvements and new board additions. * tag 'media/v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (381 commits) media: au0828 disable tuner to demod link in au0828_media_device_register() [media] touptek: cast char types on %x printk [media] touptek: don't DMA at the stack [media] mceusb: use %*ph for small buffer dumps [media] v4l: exynos4-is: Drop unneeded check when setting up fimc-lite links [media] v4l: vsp1: Check if an entity is a subdev with the right function [media] hide unused functions for !MEDIA_CONTROLLER [media] em28xx: fix Terratec Grabby AC97 codec detection [media] media: add prefixes to interface types [media] media: rc: nuvoton: switch attribute wakeup_data to text [media] v4l2-ioctl: fix YUV422P pixel format description [media] media: fix null pointer dereference in v4l_vb2q_enable_media_source() [media] v4l2-mc.h: fix yet more compiler errors [media] staging/media: add missing TODO files [media] media.h: always start with 1 for the audio entities [media] sound/usb: Use meaninful names for goto labels [media] v4l2-mc.h: fix compiler warnings [media] media: au0828 audio mixer isn't connected to decoder [media] sound/usb: Use Media Controller API to share media resources [media] dw2102: add support for TeVii S662 ...
2016-03-16Merge tag 'libnvdimm-for-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Asynchronous address range scrub: Given the capacities of next generation persistent memory devices a scrub operation to find all poison may take 10s of seconds. We want this scrub work to be done asynchronously with the rest of system initialization, so we move it out of line from the NFIT probing, i.e. acpi_nfit_add(). - Clear poison: ACPI 6.1 introduces the ability to send "clear error" commands to the ACPI0012:00 device representing the root of an "nvdimm bus". Similar to relocating a bad block on a disk, this support clears media errors in response to a write. - Persistent memory resource tracking: A persistent memory range may be designated as simply "reserved" by platform firmware in the efi/e820 memory map. Later when the NFIT driver loads it discovers that the range is "Persistent Memory". The NFIT bus driver inserts a resource to advertise that "persistent" attribute in the system resource tree for /proc/iomem and kernel-internal usages. - Miscellaneous cleanups and fixes: Workaround section misaligned pmem ranges when allocating a struct page memmap, fix handling of the read-only case in the ioctl path, and clean up block device major number allocation. * tag 'libnvdimm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits) libnvdimm, pmem: clear poison on write libnvdimm, pmem: fix kmap_atomic() leak in error path nvdimm/btt: don't allocate unused major device number nvdimm/blk: don't allocate unused major device number pmem: don't allocate unused major device number ACPI: Change NFIT driver to insert new resource resource: Export insert_resource and remove_resource resource: Add remove_resource interface resource: Change __request_region to inherit from immediate parent libnvdimm, pmem: fix ia64 build, use PHYS_PFN nfit, libnvdimm: clear poison command support libnvdimm, pfn: 'resource'-address and 'size' attributes for pfn devices libnvdimm, pmem: adjust for section collisions with 'System RAM' libnvdimm, pmem: fix 'pfn' support for section-misaligned namespaces libnvdimm: Fix security issue with DSM IOCTL. libnvdimm: Clean-up access mode check. tools/testing/nvdimm: expand ars unit testing nfit: disable userspace initiated ars during scrub nfit: scrub and register regions in a workqueue nfit, libnvdimm: async region scrub workqueue ...
2016-03-16Merge tag 'dm-4.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Most attention this cycle went to optimizing blk-mq request-based DM (dm-mq) that is used exclussively by DM multipath: - A stable fix for dm-mq that eliminates excessive context switching offers the biggest performance improvement (for both IOPs and throughput). - But more work is needed, during the next cycle, to reduce spinlock contention in DM multipath on large NUMA systems. - A stable fix for a NULL pointer seen when DM stats is enabled on a DM multipath device that must requeue an IO due to path failure. - A stable fix for DM snapshot to disallow the COW and origin devices from being identical. This amounts to graceful failure in the face of userspace error because these devices shouldn't ever be identical. - Stable fixes for DM cache and DM thin provisioning to address crashes seen if/when their respective metadata device experiences failures that cause the transition to 'fail_io' mode. - The DM cache 'mq' policy is now an alias for the 'smq' policy. The 'smq' policy proved to be consistently better than 'mq'. As such 'mq', with all its complex user-facing tunables, has been eliminated. - Improve DM thin provisioning to consistently return -ENOSPC once the thin-pool's data volume is out of space. - Improve DM core to properly handle error propagation if bio_integrity_clone() fails in clone_bio(). - Other small cleanups and improvements to DM core. * tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits) dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request() dm thin: consistently return -ENOSPC if pool has run out of data space dm cache: bump the target version dm cache: make sure every metadata function checks fail_io dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO dm cache policy smq: clarify that mq registration failure was for 'mq' dm: return error if bio_integrity_clone() fails in clone_bio() dm thin metadata: don't issue prefetches if a transaction abort has failed dm snapshot: disallow the COW and origin devices from being identical dm cache: make the 'mq' policy an alias for 'smq' dm: drop unnecessary assignment of md->queue dm: reorder 'struct mapped_device' members to fix alignment and holes dm: remove dummy definition of 'struct dm_table' dm: add 'dm_numa_node' module parameter dm thin metadata: remove needless newline from subtree_dec() DMERR message dm mpath: cleanup reinstate_path() et al based on code review dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate dm round robin: use percpu 'repeat_count' and 'current_path' dm path selector: remove 'repeat_count' return from .select_path hook ...
2016-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This pull includes driver updates from the usual suspects (stex, hpsa, ncr5380, scsi_dh, qla2xxx, be2iscsi, hisi_sas, cxlflash, aacraid, mp3sas, megaraid_sas, ibmvscsi, ufs) plus an assortment of miscellaneous fixes. The major user visible change of this pull is that we've moved from monotonically increasing host number to an ida allocated one (meaning the numbers get re-used) because someone managed to wrap the count in an iscsi system. We don't believe there will be any adverse consequences of this" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (230 commits) MAINTAINERS: use new email address for James Bottomley mpt3sas: Remove unnecessary synchronize_irq() before free_irq() sg: fix dxferp in from_to case cxlflash: Increase cmd_per_lun for better throughput cxlflash: Fix to avoid unnecessary scan with internal LUNs cxlflash: Reorder user context initialization cxlflash: Simplify attach path error cleanup cxlflash: Split out context initialization cxlflash: Unmap problem state area before detaching master context cxlflash: Simplify PCI registration scsi: storvsc: fix SRB_STATUS_ABORTED handling be2iscsi: set the boot_kset pointer to NULL in case of failure sd: Fix discard granularity when LBPRZ=1 be2iscsi: Remove unnecessary synchronize_irq() before free_irq() scsi_sysfs: call 'device_add' after attaching device handler scsi_dh_emc: update 'access_state' field scsi_dh_rdac: update 'access_state' field scsi_dh_alua: update 'access_state' field scsi_dh_alua: use common definitions for ALUA state scsi: Add 'access_state' and 'preferred_path' attribute ...