summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rw-r--r--tools/testing/selftests/livepatch/functions.sh37
-rw-r--r--tools/testing/selftests/rseq/basic_percpu_ops_test.c14
-rw-r--r--tools/testing/selftests/rseq/param_test.c22
-rw-r--r--tools/testing/selftests/seccomp/seccomp_benchmark.c104
4 files changed, 109 insertions, 68 deletions
diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh
index c8416c54b463..b1fd7362c2fe 100644
--- a/tools/testing/selftests/livepatch/functions.sh
+++ b/tools/testing/selftests/livepatch/functions.sh
@@ -42,17 +42,6 @@ function die() {
exit 1
}
-# save existing dmesg so we can detect new content
-function save_dmesg() {
- SAVED_DMESG=$(mktemp --tmpdir -t klp-dmesg-XXXXXX)
- dmesg > "$SAVED_DMESG"
-}
-
-# cleanup temporary dmesg file from save_dmesg()
-function cleanup_dmesg_file() {
- rm -f "$SAVED_DMESG"
-}
-
function push_config() {
DYNAMIC_DEBUG=$(grep '^kernel/livepatch' /sys/kernel/debug/dynamic_debug/control | \
awk -F'[: ]' '{print "file " $1 " line " $2 " " $4}')
@@ -99,7 +88,6 @@ function set_ftrace_enabled() {
function cleanup() {
pop_config
- cleanup_dmesg_file
}
# setup_config - save the current config and set a script exit trap that
@@ -280,7 +268,15 @@ function set_pre_patch_ret {
function start_test {
local test="$1"
- save_dmesg
+ # Dump something unique into the dmesg log, then stash the entry
+ # in LAST_DMESG. The check_result() function will use it to
+ # find new kernel messages since the test started.
+ local last_dmesg_msg="livepatch kselftest timestamp: $(date --rfc-3339=ns)"
+ log "$last_dmesg_msg"
+ loop_until 'dmesg | grep -q "$last_dmesg_msg"' ||
+ die "buffer busy? can't find canary dmesg message: $last_dmesg_msg"
+ LAST_DMESG=$(dmesg | grep "$last_dmesg_msg")
+
echo -n "TEST: $test ... "
log "===== TEST: $test ====="
}
@@ -291,23 +287,24 @@ function check_result {
local expect="$*"
local result
- # Note: when comparing dmesg output, the kernel log timestamps
- # help differentiate repeated testing runs. Remove them with a
- # post-comparison sed filter.
-
- result=$(dmesg | comm --nocheck-order -13 "$SAVED_DMESG" - | \
+ # Test results include any new dmesg entry since LAST_DMESG, then:
+ # - include lines matching keywords
+ # - exclude lines matching keywords
+ # - filter out dmesg timestamp prefixes
+ result=$(dmesg | awk -v last_dmesg="$LAST_DMESG" 'p; $0 == last_dmesg { p=1 }' | \
grep -e 'livepatch:' -e 'test_klp' | \
grep -v '\(tainting\|taints\) kernel' | \
sed 's/^\[[ 0-9.]*\] //')
if [[ "$expect" == "$result" ]] ; then
echo "ok"
+ elif [[ "$result" == "" ]] ; then
+ echo -e "not ok\n\nbuffer overrun? can't find canary dmesg entry: $LAST_DMESG\n"
+ die "livepatch kselftest(s) failed"
else
echo -e "not ok\n\n$(diff -upr --label expected --label result <(echo "$expect") <(echo "$result"))\n"
die "livepatch kselftest(s) failed"
fi
-
- cleanup_dmesg_file
}
# check_sysfs_rights(modname, rel_path, expected_rights) - check sysfs
diff --git a/tools/testing/selftests/rseq/basic_percpu_ops_test.c b/tools/testing/selftests/rseq/basic_percpu_ops_test.c
index 887542961968..2348d2c20d0a 100644
--- a/tools/testing/selftests/rseq/basic_percpu_ops_test.c
+++ b/tools/testing/selftests/rseq/basic_percpu_ops_test.c
@@ -24,6 +24,11 @@ bool rseq_validate_cpu_id(void)
{
return rseq_mm_cid_available();
}
+static
+bool rseq_use_cpu_index(void)
+{
+ return false; /* Use mm_cid */
+}
#else
# define RSEQ_PERCPU RSEQ_PERCPU_CPU_ID
static
@@ -36,6 +41,11 @@ bool rseq_validate_cpu_id(void)
{
return rseq_current_cpu_raw() >= 0;
}
+static
+bool rseq_use_cpu_index(void)
+{
+ return true; /* Use cpu_id as index. */
+}
#endif
struct percpu_lock_entry {
@@ -274,7 +284,7 @@ void test_percpu_list(void)
/* Generate list entries for every usable cpu. */
sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus);
for (i = 0; i < CPU_SETSIZE; i++) {
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
for (j = 1; j <= 100; j++) {
struct percpu_list_node *node;
@@ -299,7 +309,7 @@ void test_percpu_list(void)
for (i = 0; i < CPU_SETSIZE; i++) {
struct percpu_list_node *node;
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
while ((node = __percpu_list_pop(&list, i))) {
diff --git a/tools/testing/selftests/rseq/param_test.c b/tools/testing/selftests/rseq/param_test.c
index 20403d58345c..2f37961240ca 100644
--- a/tools/testing/selftests/rseq/param_test.c
+++ b/tools/testing/selftests/rseq/param_test.c
@@ -288,6 +288,11 @@ bool rseq_validate_cpu_id(void)
{
return rseq_mm_cid_available();
}
+static
+bool rseq_use_cpu_index(void)
+{
+ return false; /* Use mm_cid */
+}
# ifdef TEST_MEMBARRIER
/*
* Membarrier does not currently support targeting a mm_cid, so
@@ -312,6 +317,11 @@ bool rseq_validate_cpu_id(void)
{
return rseq_current_cpu_raw() >= 0;
}
+static
+bool rseq_use_cpu_index(void)
+{
+ return true; /* Use cpu_id as index. */
+}
# ifdef TEST_MEMBARRIER
static
int rseq_membarrier_expedited(int cpu)
@@ -715,7 +725,7 @@ void test_percpu_list(void)
/* Generate list entries for every usable cpu. */
sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus);
for (i = 0; i < CPU_SETSIZE; i++) {
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
for (j = 1; j <= 100; j++) {
struct percpu_list_node *node;
@@ -752,7 +762,7 @@ void test_percpu_list(void)
for (i = 0; i < CPU_SETSIZE; i++) {
struct percpu_list_node *node;
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
while ((node = __percpu_list_pop(&list, i))) {
@@ -902,7 +912,7 @@ void test_percpu_buffer(void)
/* Generate list entries for every usable cpu. */
sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus);
for (i = 0; i < CPU_SETSIZE; i++) {
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
/* Worse-case is every item in same CPU. */
buffer.c[i].array =
@@ -952,7 +962,7 @@ void test_percpu_buffer(void)
for (i = 0; i < CPU_SETSIZE; i++) {
struct percpu_buffer_node *node;
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
while ((node = __percpu_buffer_pop(&buffer, i))) {
@@ -1113,7 +1123,7 @@ void test_percpu_memcpy_buffer(void)
/* Generate list entries for every usable cpu. */
sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus);
for (i = 0; i < CPU_SETSIZE; i++) {
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
/* Worse-case is every item in same CPU. */
buffer.c[i].array =
@@ -1160,7 +1170,7 @@ void test_percpu_memcpy_buffer(void)
for (i = 0; i < CPU_SETSIZE; i++) {
struct percpu_memcpy_buffer_node item;
- if (!CPU_ISSET(i, &allowed_cpus))
+ if (rseq_use_cpu_index() && !CPU_ISSET(i, &allowed_cpus))
continue;
while (__percpu_memcpy_buffer_pop(&buffer, &item, i)) {
diff --git a/tools/testing/selftests/seccomp/seccomp_benchmark.c b/tools/testing/selftests/seccomp/seccomp_benchmark.c
index 5b5c9d558dee..97b86980b768 100644
--- a/tools/testing/selftests/seccomp/seccomp_benchmark.c
+++ b/tools/testing/selftests/seccomp/seccomp_benchmark.c
@@ -38,10 +38,10 @@ unsigned long long timing(clockid_t clk_id, unsigned long long samples)
i *= 1000000000ULL;
i += finish.tv_nsec - start.tv_nsec;
- printf("%lu.%09lu - %lu.%09lu = %llu (%.1fs)\n",
- finish.tv_sec, finish.tv_nsec,
- start.tv_sec, start.tv_nsec,
- i, (double)i / 1000000000.0);
+ ksft_print_msg("%lu.%09lu - %lu.%09lu = %llu (%.1fs)\n",
+ finish.tv_sec, finish.tv_nsec,
+ start.tv_sec, start.tv_nsec,
+ i, (double)i / 1000000000.0);
return i;
}
@@ -53,7 +53,7 @@ unsigned long long calibrate(void)
pid_t pid, ret;
int seconds = 15;
- printf("Calibrating sample size for %d seconds worth of syscalls ...\n", seconds);
+ ksft_print_msg("Calibrating sample size for %d seconds worth of syscalls ...\n", seconds);
samples = 0;
pid = getpid();
@@ -98,24 +98,36 @@ bool le(int i_one, int i_two)
}
long compare(const char *name_one, const char *name_eval, const char *name_two,
- unsigned long long one, bool (*eval)(int, int), unsigned long long two)
+ unsigned long long one, bool (*eval)(int, int), unsigned long long two,
+ bool skip)
{
bool good;
- printf("\t%s %s %s (%lld %s %lld): ", name_one, name_eval, name_two,
- (long long)one, name_eval, (long long)two);
+ if (skip) {
+ ksft_test_result_skip("%s %s %s\n", name_one, name_eval,
+ name_two);
+ return 0;
+ }
+
+ ksft_print_msg("\t%s %s %s (%lld %s %lld): ", name_one, name_eval, name_two,
+ (long long)one, name_eval, (long long)two);
if (one > INT_MAX) {
- printf("Miscalculation! Measurement went negative: %lld\n", (long long)one);
- return 1;
+ ksft_print_msg("Miscalculation! Measurement went negative: %lld\n", (long long)one);
+ good = false;
+ goto out;
}
if (two > INT_MAX) {
- printf("Miscalculation! Measurement went negative: %lld\n", (long long)two);
- return 1;
+ ksft_print_msg("Miscalculation! Measurement went negative: %lld\n", (long long)two);
+ good = false;
+ goto out;
}
good = eval(one, two);
printf("%s\n", good ? "✔️" : "❌");
+out:
+ ksft_test_result(good, "%s %s %s\n", name_one, name_eval, name_two);
+
return good ? 0 : 1;
}
@@ -142,15 +154,22 @@ int main(int argc, char *argv[])
unsigned long long samples, calc;
unsigned long long native, filter1, filter2, bitmap1, bitmap2;
unsigned long long entry, per_filter1, per_filter2;
+ bool skip = false;
setbuf(stdout, NULL);
- printf("Running on:\n");
+ ksft_print_header();
+ ksft_set_plan(7);
+
+ ksft_print_msg("Running on:\n");
+ ksft_print_msg("");
system("uname -a");
- printf("Current BPF sysctl settings:\n");
+ ksft_print_msg("Current BPF sysctl settings:\n");
/* Avoid using "sysctl" which may not be installed. */
+ ksft_print_msg("");
system("grep -H . /proc/sys/net/core/bpf_jit_enable");
+ ksft_print_msg("");
system("grep -H . /proc/sys/net/core/bpf_jit_harden");
if (argc > 1)
@@ -158,11 +177,11 @@ int main(int argc, char *argv[])
else
samples = calibrate();
- printf("Benchmarking %llu syscalls...\n", samples);
+ ksft_print_msg("Benchmarking %llu syscalls...\n", samples);
/* Native call */
native = timing(CLOCK_PROCESS_CPUTIME_ID, samples) / samples;
- printf("getpid native: %llu ns\n", native);
+ ksft_print_msg("getpid native: %llu ns\n", native);
ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
assert(ret == 0);
@@ -172,35 +191,37 @@ int main(int argc, char *argv[])
assert(ret == 0);
bitmap1 = timing(CLOCK_PROCESS_CPUTIME_ID, samples) / samples;
- printf("getpid RET_ALLOW 1 filter (bitmap): %llu ns\n", bitmap1);
+ ksft_print_msg("getpid RET_ALLOW 1 filter (bitmap): %llu ns\n", bitmap1);
/* Second filter resulting in a bitmap */
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &bitmap_prog);
assert(ret == 0);
bitmap2 = timing(CLOCK_PROCESS_CPUTIME_ID, samples) / samples;
- printf("getpid RET_ALLOW 2 filters (bitmap): %llu ns\n", bitmap2);
+ ksft_print_msg("getpid RET_ALLOW 2 filters (bitmap): %llu ns\n", bitmap2);
/* Third filter, can no longer be converted to bitmap */
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog);
assert(ret == 0);
filter1 = timing(CLOCK_PROCESS_CPUTIME_ID, samples) / samples;
- printf("getpid RET_ALLOW 3 filters (full): %llu ns\n", filter1);
+ ksft_print_msg("getpid RET_ALLOW 3 filters (full): %llu ns\n", filter1);
/* Fourth filter, can not be converted to bitmap because of filter 3 */
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &bitmap_prog);
assert(ret == 0);
filter2 = timing(CLOCK_PROCESS_CPUTIME_ID, samples) / samples;
- printf("getpid RET_ALLOW 4 filters (full): %llu ns\n", filter2);
+ ksft_print_msg("getpid RET_ALLOW 4 filters (full): %llu ns\n", filter2);
/* Estimations */
#define ESTIMATE(fmt, var, what) do { \
var = (what); \
- printf("Estimated " fmt ": %llu ns\n", var); \
- if (var > INT_MAX) \
- goto more_samples; \
+ ksft_print_msg("Estimated " fmt ": %llu ns\n", var); \
+ if (var > INT_MAX) { \
+ skip = true; \
+ ret |= 1; \
+ } \
} while (0)
ESTIMATE("total seccomp overhead for 1 bitmapped filter", calc,
@@ -218,31 +239,34 @@ int main(int argc, char *argv[])
ESTIMATE("seccomp per-filter overhead (filters / 4)", per_filter2,
(filter2 - native - entry) / 4);
- printf("Expectations:\n");
- ret |= compare("native", "≤", "1 bitmap", native, le, bitmap1);
- bits = compare("native", "≤", "1 filter", native, le, filter1);
+ ksft_print_msg("Expectations:\n");
+ ret |= compare("native", "≤", "1 bitmap", native, le, bitmap1,
+ skip);
+ bits = compare("native", "≤", "1 filter", native, le, filter1,
+ skip);
if (bits)
- goto more_samples;
+ skip = true;
ret |= compare("per-filter (last 2 diff)", "≈", "per-filter (filters / 4)",
- per_filter1, approx, per_filter2);
+ per_filter1, approx, per_filter2, skip);
bits = compare("1 bitmapped", "≈", "2 bitmapped",
- bitmap1 - native, approx, bitmap2 - native);
+ bitmap1 - native, approx, bitmap2 - native, skip);
if (bits) {
- printf("Skipping constant action bitmap expectations: they appear unsupported.\n");
- goto out;
+ ksft_print_msg("Skipping constant action bitmap expectations: they appear unsupported.\n");
+ skip = true;
}
- ret |= compare("entry", "≈", "1 bitmapped", entry, approx, bitmap1 - native);
- ret |= compare("entry", "≈", "2 bitmapped", entry, approx, bitmap2 - native);
+ ret |= compare("entry", "≈", "1 bitmapped", entry, approx,
+ bitmap1 - native, skip);
+ ret |= compare("entry", "≈", "2 bitmapped", entry, approx,
+ bitmap2 - native, skip);
ret |= compare("native + entry + (per filter * 4)", "≈", "4 filters total",
- entry + (per_filter1 * 4) + native, approx, filter2);
- if (ret == 0)
- goto out;
+ entry + (per_filter1 * 4) + native, approx, filter2,
+ skip);
-more_samples:
- printf("Saw unexpected benchmark result. Try running again with more samples?\n");
-out:
- return 0;
+ if (ret)
+ ksft_print_msg("Saw unexpected benchmark result. Try running again with more samples?\n");
+
+ ksft_finished();
}
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-25 07:48:47 +0000