summaryrefslogtreecommitdiff
path: root/tools/power
diff options
context:
space:
mode:
Diffstat (limited to 'tools/power')
-rw-r--r--tools/power/x86/turbostat/turbostat.87
-rw-r--r--tools/power/x86/turbostat/turbostat.c105
2 files changed, 52 insertions, 60 deletions
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index e8fb1e02d121..a08de27713e0 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -53,8 +53,7 @@ name as necessary to disambiguate it from others is necessary. Note that option
.PP
\fB--Dump\fP displays the raw counter values.
.PP
-\fB--debug\fP displays additional system configuration information. Invoking this parameter
-more than once may also enable internal turbostat debug information.
+\fB--quiet\fP Do not decode and print the system configuration header information.
.PP
\fB--interval seconds\fP overrides the default 5.0 second measurement interval.
.PP
@@ -124,7 +123,6 @@ Or a command may be specified as in "FORK EXAMPLE" below.
.fi
.SH DEBUG EXAMPLE
-The "--debug" option prints additional system information before measurements:
The first row of statistics is a summary for the entire system.
For residency % columns, the summary is a weighted average.
@@ -188,9 +186,6 @@ should be sustainable on all CPUs indefinitely, given nominal power and cooling.
The remaining rows show what maximum turbo frequency is possible
depending on the number of idle cores. Note that not all information is
available on all processors.
-.PP
-The --debug option adds additional columns to the measurement ouput, including CPU idle power-state residency processor temperature sensor readinds.
-See the field definitions above.
.SH FORK EXAMPLE
If turbostat is invoked with a command, it will fork that command
and output the statistics gathered after the command exits.
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index c50b452a404e..6867557596af 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -49,6 +49,7 @@ FILE *outf;
int *fd_percpu;
struct timespec interval_ts = {5, 0};
unsigned int debug;
+unsigned int quiet;
unsigned int rapl_joules;
unsigned int summary_only;
unsigned int dump_only;
@@ -3114,7 +3115,7 @@ void rapl_probe(unsigned int family, unsigned int model)
tdp = get_tdp(model);
rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp;
- if (debug)
+ if (!quiet)
fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp);
return;
@@ -3239,11 +3240,9 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr))
return -1;
- if (debug) {
- fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx "
- "(%f Watts, %f Joules, %f sec.)\n", cpu, msr,
- rapl_power_units, rapl_energy_units, rapl_time_units);
- }
+ fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr,
+ rapl_power_units, rapl_energy_units, rapl_time_units);
+
if (do_rapl & RAPL_PKG_POWER_INFO) {
if (get_msr(cpu, MSR_PKG_POWER_INFO, &msr))
@@ -3264,7 +3263,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
return -9;
fprintf(outf, "cpu%d: MSR_PKG_POWER_LIMIT: 0x%08llx (%slocked)\n",
- cpu, msr, (msr >> 63) & 1 ? "": "UN");
+ cpu, msr, (msr >> 63) & 1 ? "" : "UN");
print_power_limit_msr(cpu, msr, "PKG Limit #1");
fprintf(outf, "cpu%d: PKG Limit #2: %sabled (%f Watts, %f* sec, clamp %sabled)\n",
@@ -3290,40 +3289,34 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
if (get_msr(cpu, MSR_DRAM_POWER_LIMIT, &msr))
return -9;
fprintf(outf, "cpu%d: MSR_DRAM_POWER_LIMIT: 0x%08llx (%slocked)\n",
- cpu, msr, (msr >> 31) & 1 ? "": "UN");
+ cpu, msr, (msr >> 31) & 1 ? "" : "UN");
print_power_limit_msr(cpu, msr, "DRAM Limit");
}
if (do_rapl & RAPL_CORE_POLICY) {
- if (debug) {
- if (get_msr(cpu, MSR_PP0_POLICY, &msr))
- return -7;
+ if (get_msr(cpu, MSR_PP0_POLICY, &msr))
+ return -7;
- fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF);
- }
+ fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF);
}
if (do_rapl & RAPL_CORES_POWER_LIMIT) {
- if (debug) {
- if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr))
- return -9;
- fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n",
- cpu, msr, (msr >> 31) & 1 ? "": "UN");
- print_power_limit_msr(cpu, msr, "Cores Limit");
- }
+ if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr))
+ return -9;
+ fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n",
+ cpu, msr, (msr >> 31) & 1 ? "" : "UN");
+ print_power_limit_msr(cpu, msr, "Cores Limit");
}
if (do_rapl & RAPL_GFX) {
- if (debug) {
- if (get_msr(cpu, MSR_PP1_POLICY, &msr))
- return -8;
+ if (get_msr(cpu, MSR_PP1_POLICY, &msr))
+ return -8;
- fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF);
+ fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF);
- if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr))
- return -9;
- fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n",
- cpu, msr, (msr >> 31) & 1 ? "": "UN");
- print_power_limit_msr(cpu, msr, "GFX Limit");
- }
+ if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr))
+ return -9;
+ fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n",
+ cpu, msr, (msr >> 31) & 1 ? "" : "UN");
+ print_power_limit_msr(cpu, msr, "GFX Limit");
}
return 0;
}
@@ -3469,7 +3462,7 @@ double slm_bclk(void)
}
freq = slm_freq_table[i];
- if (debug)
+ if (!quiet)
fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq);
return freq;
@@ -3533,7 +3526,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk
target_c_local = (msr >> 16) & 0xFF;
- if (debug)
+ if (!quiet)
fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n",
cpu, msr, target_c_local);
@@ -3648,7 +3641,7 @@ void process_cpuid()
if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
genuine_intel = 1;
- if (debug)
+ if (!quiet)
fprintf(outf, "CPUID(0): %.4s%.4s%.4s ",
(char *)&ebx, (char *)&edx, (char *)&ecx);
@@ -3659,7 +3652,7 @@ void process_cpuid()
if (family == 6 || family == 0xf)
model += ((fms >> 16) & 0xf) << 4;
- if (debug) {
+ if (!quiet) {
fprintf(outf, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
max_level, family, model, stepping, family, model, stepping);
fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s\n",
@@ -3721,7 +3714,7 @@ void process_cpuid()
has_hwp_pkg = eax & (1 << 11);
has_epb = ecx & (1 << 3);
- if (debug)
+ if (!quiet)
fprintf(outf, "CPUID(6): %sAPERF, %sTURBO, %sDTS, %sPTM, %sHWP, "
"%sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n",
has_aperf ? "" : "No-",
@@ -3735,11 +3728,11 @@ void process_cpuid()
has_hwp_pkg ? "" : "No-",
has_epb ? "" : "No-");
- if (debug)
+ if (!quiet)
decode_misc_enable_msr();
- if (max_level >= 0x7 && debug) {
+ if (max_level >= 0x7 && !quiet) {
int has_sgx;
ecx = 0;
@@ -3765,7 +3758,7 @@ void process_cpuid()
if (ebx_tsc != 0) {
- if (debug && (ebx != 0))
+ if (!quiet && (ebx != 0))
fprintf(outf, "CPUID(0x15): eax_crystal: %d ebx_tsc: %d ecx_crystal_hz: %d\n",
eax_crystal, ebx_tsc, crystal_hz);
@@ -3790,7 +3783,7 @@ void process_cpuid()
if (crystal_hz) {
tsc_hz = (unsigned long long) crystal_hz * ebx_tsc / eax_crystal;
- if (debug)
+ if (!quiet)
fprintf(outf, "TSC: %lld MHz (%d Hz * %d / %d / 1000000)\n",
tsc_hz / 1000000, crystal_hz, ebx_tsc, eax_crystal);
}
@@ -3805,7 +3798,7 @@ void process_cpuid()
base_mhz = max_mhz = bus_mhz = edx = 0;
__cpuid(0x16, base_mhz, max_mhz, bus_mhz, edx);
- if (debug)
+ if (!quiet)
fprintf(outf, "CPUID(0x16): base_mhz: %d max_mhz: %d bus_mhz: %d\n",
base_mhz, max_mhz, bus_mhz);
}
@@ -3845,16 +3838,16 @@ void process_cpuid()
do_slm_cstates = is_slm(family, model);
do_knl_cstates = is_knl(family, model);
- if (debug)
+ if (!quiet)
decode_misc_pwr_mgmt_msr();
- if (debug && has_slv_msrs(family, model))
+ if (!quiet && has_slv_msrs(family, model))
decode_c6_demotion_policy_msr();
rapl_probe(family, model);
perf_limit_reasons_probe(family, model);
- if (debug)
+ if (!quiet)
dump_cstate_pstate_config_info(family, model);
if (has_skl_msrs(family, model))
@@ -3866,7 +3859,7 @@ void process_cpuid()
if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK))
BIC_PRESENT(BIC_GFXMHz);
- if (debug)
+ if (!quiet)
decode_misc_feature_control();
return;
@@ -3883,7 +3876,7 @@ void help()
"to print statistics, until interrupted.\n"
"--add add a counter\n"
" eg. --add msr0x10,u64,cpu,delta,MY_TSC\n"
- "--debug run in \"debug\" mode\n"
+ "--quiet skip decoding system configuration header\n"
"--interval sec Override default 5-second measurement interval\n"
"--help print this help message\n"
"--out file create or truncate \"file\" for all output\n"
@@ -4136,24 +4129,24 @@ void turbostat_init()
process_cpuid();
- if (debug)
+ if (!quiet)
for_all_cpus(print_hwp, ODD_COUNTERS);
- if (debug)
+ if (!quiet)
for_all_cpus(print_epb, ODD_COUNTERS);
- if (debug)
+ if (!quiet)
for_all_cpus(print_perf_limit, ODD_COUNTERS);
- if (debug)
+ if (!quiet)
for_all_cpus(print_rapl, ODD_COUNTERS);
for_all_cpus(set_temperature_target, ODD_COUNTERS);
- if (debug)
+ if (!quiet)
for_all_cpus(print_thermal, ODD_COUNTERS);
- if (debug && do_irtl_snb)
+ if (!quiet && do_irtl_snb)
print_irtl();
}
@@ -4429,7 +4422,7 @@ void cmdline(int argc, char **argv)
static struct option long_options[] = {
{"add", required_argument, 0, 'a'},
{"Dump", no_argument, 0, 'D'},
- {"debug", no_argument, 0, 'd'},
+ {"debug", no_argument, 0, 'd'}, /* internal, not documented */
{"interval", required_argument, 0, 'i'},
{"help", no_argument, 0, 'h'},
{"hide", required_argument, 0, 'H'}, // meh, -h taken by --help
@@ -4437,6 +4430,7 @@ void cmdline(int argc, char **argv)
{"out", required_argument, 0, 'o'},
{"Package", no_argument, 0, 'p'},
{"processor", no_argument, 0, 'p'},
+ {"quiet", no_argument, 0, 'q'},
{"show", required_argument, 0, 's'},
{"Summary", no_argument, 0, 'S'},
{"TCC", required_argument, 0, 'T'},
@@ -4446,7 +4440,7 @@ void cmdline(int argc, char **argv)
progname = argv[0];
- while ((opt = getopt_long_only(argc, argv, "+C:c:Ddhi:JM:m:o:PpST:v",
+ while ((opt = getopt_long_only(argc, argv, "+C:c:Ddhi:JM:m:o:PpqST:v",
long_options, &option_index)) != -1) {
switch (opt) {
case 'a':
@@ -4491,6 +4485,9 @@ void cmdline(int argc, char **argv)
case 'p':
show_core_only++;
break;
+ case 'q':
+ quiet = 1;
+ break;
case 's':
parse_show_hide(optarg, SHOW_LIST);
break;
@@ -4514,7 +4511,7 @@ int main(int argc, char **argv)
cmdline(argc, argv);
- if (debug)
+ if (!quiet)
print_version();
turbostat_init();
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-25 17:42:42 +0000