diff options
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/soc/codecs/Kconfig | 5 | ||||
| -rw-r--r-- | sound/soc/codecs/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/sirf-audio-codec.c | 4 | ||||
| -rw-r--r-- | sound/soc/codecs/spdif_transmitter.c | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/tas2552.c | 544 | ||||
| -rw-r--r-- | sound/soc/codecs/tas2552.h | 129 | ||||
| -rw-r--r-- | sound/soc/codecs/tas5086.c | 67 | ||||
| -rw-r--r-- | sound/soc/sirf/Kconfig | 6 | ||||
| -rw-r--r-- | sound/soc/sirf/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/sirf/sirf-usp.c | 415 | ||||
| -rw-r--r-- | sound/soc/sirf/sirf-usp.h | 293 |
11 files changed, 1457 insertions, 12 deletions
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index a445b448d41d..1090135de0ba 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -94,6 +94,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STA350 if I2C select SND_SOC_STA529 if I2C select SND_SOC_STAC9766 if SND_SOC_AC97_BUS + select SND_SOC_TAS2552 if I2C select SND_SOC_TAS5086 if I2C select SND_SOC_TLV320AIC23_I2C if I2C select SND_SOC_TLV320AIC23_SPI if SPI_MASTER @@ -539,6 +540,10 @@ config SND_SOC_STA529 config SND_SOC_STAC9766 tristate +config SND_SOC_TAS2552 + tristate "Texas Instruments TAS2552 Mono Audio amplifier" + depends on I2C + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a29da79a4359..20afe0f0c5be 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -165,6 +165,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o # Amp snd-soc-max9877-objs := max9877.o snd-soc-tpa6130a2-objs := tpa6130a2.o +snd-soc-tas2552-objs := tas2552.o obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AB8500_CODEC) += snd-soc-ab8500-codec.o @@ -261,6 +262,7 @@ obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA350) += snd-soc-sta350.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o +obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o diff --git a/sound/soc/codecs/sirf-audio-codec.c b/sound/soc/codecs/sirf-audio-codec.c index d90cb0fafcb2..06ba4923fd5a 100644 --- a/sound/soc/codecs/sirf-audio-codec.c +++ b/sound/soc/codecs/sirf-audio-codec.c @@ -471,8 +471,8 @@ static int sirf_audio_codec_driver_probe(struct platform_device *pdev) mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, mem_res); - if (base == NULL) - return -ENOMEM; + if (IS_ERR(base)) + return PTR_ERR(base); sirf_audio_codec->regmap = devm_regmap_init_mmio(&pdev->dev, base, &sirf_audio_codec_regmap_config); diff --git a/sound/soc/codecs/spdif_transmitter.c b/sound/soc/codecs/spdif_transmitter.c index a078aa31052a..e0df537dd4b7 100644 --- a/sound/soc/codecs/spdif_transmitter.c +++ b/sound/soc/codecs/spdif_transmitter.c @@ -24,7 +24,7 @@ #define DRV_NAME "spdif-dit" -#define STUB_RATES SNDRV_PCM_RATE_8000_96000 +#define STUB_RATES SNDRV_PCM_RATE_8000_192000 #define STUB_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_LE) diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c new file mode 100644 index 000000000000..23b32960ff1d --- /dev/null +++ b/sound/soc/codecs/tas2552.c @@ -0,0 +1,544 @@ +/* + * tas2552.c - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/tas2552-plat.h> + +#include "tas2552.h" + +static struct reg_default tas2552_reg_defs[] = { + {TAS2552_CFG_1, 0x22}, + {TAS2552_CFG_3, 0x80}, + {TAS2552_DOUT, 0x00}, + {TAS2552_OUTPUT_DATA, 0xc0}, + {TAS2552_PDM_CFG, 0x01}, + {TAS2552_PGA_GAIN, 0x00}, + {TAS2552_BOOST_PT_CTRL, 0x0f}, + {TAS2552_RESERVED_0D, 0x00}, + {TAS2552_LIMIT_RATE_HYS, 0x08}, + {TAS2552_CFG_2, 0xef}, + {TAS2552_SER_CTRL_1, 0x00}, + {TAS2552_SER_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_1, 0x10}, + {TAS2552_PLL_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_3, 0x00}, + {TAS2552_BTIP, 0x8f}, + {TAS2552_BTS_CTRL, 0x80}, + {TAS2552_LIMIT_RELEASE, 0x04}, + {TAS2552_LIMIT_INT_COUNT, 0x00}, + {TAS2552_EDGE_RATE_CTRL, 0x40}, + {TAS2552_VBAT_DATA, 0x00}, +}; + +#define TAS2552_NUM_SUPPLIES 3 +static const char *tas2552_supply_names[TAS2552_NUM_SUPPLIES] = { + "vbat", /* vbat voltage */ + "iovdd", /* I/O Voltage */ + "avdd", /* Analog DAC Voltage */ +}; + +struct tas2552_data { + struct snd_soc_codec *codec; + struct regmap *regmap; + struct i2c_client *tas2552_client; + struct regulator_bulk_data supplies[TAS2552_NUM_SUPPLIES]; + struct gpio_desc *enable_gpio; + unsigned char regs[TAS2552_VBAT_DATA]; + unsigned int mclk; +}; + +static void tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) +{ + u8 cfg1_reg; + + if (sw_shutdown) + cfg1_reg = 0; + else + cfg1_reg = TAS2552_SWS_MASK; + + snd_soc_update_bits(tas_data->codec, TAS2552_CFG_1, + TAS2552_SWS_MASK, cfg1_reg); +} + +static int tas2552_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct tas2552_data *tas2552 = dev_get_drvdata(codec->dev); + int sample_rate, pll_clk; + int d; + u8 p, j; + + /* Turn on Class D amplifier */ + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN_MASK, + TAS2552_CLASSD_EN); + + if (!tas2552->mclk) + return -EINVAL; + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0); + + if (tas2552->mclk == TAS2552_245MHZ_CLK || + tas2552->mclk == TAS2552_225MHZ_CLK) { + /* By pass the PLL configuration */ + snd_soc_update_bits(codec, TAS2552_PLL_CTRL_2, + TAS2552_PLL_BYPASS_MASK, + TAS2552_PLL_BYPASS); + } else { + /* Fill in the PLL control registers for J & D + * PLL_CLK = (.5 * freq * J.D) / 2^p + * Need to fill in J and D here based on incoming freq + */ + p = snd_soc_read(codec, TAS2552_PLL_CTRL_1); + p = (p >> 7); + sample_rate = params_rate(params); + + if (sample_rate == 48000) + pll_clk = TAS2552_245MHZ_CLK; + else if (sample_rate == 44100) + pll_clk = TAS2552_225MHZ_CLK; + else { + dev_vdbg(codec->dev, "Substream sample rate is not found %i\n", + params_rate(params)); + return -EINVAL; + } + + j = (pll_clk * 2 * (1 << p)) / tas2552->mclk; + d = (pll_clk * 2 * (1 << p)) % tas2552->mclk; + + snd_soc_update_bits(codec, TAS2552_PLL_CTRL_1, + TAS2552_PLL_J_MASK, j); + snd_soc_write(codec, TAS2552_PLL_CTRL_2, + (d >> 7) & TAS2552_PLL_D_UPPER_MASK); + snd_soc_write(codec, TAS2552_PLL_CTRL_3, + d & TAS2552_PLL_D_LOWER_MASK); + + } + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, + TAS2552_PLL_ENABLE); + + return 0; +} + +static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + u8 serial_format; + u8 serial_control_mask; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + serial_format = 0x00; + break; + case SND_SOC_DAIFMT_CBS_CFM: + serial_format = TAS2552_WORD_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFS: + serial_format = TAS2552_BIT_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFM: + serial_format = (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK); + break; + default: + dev_vdbg(codec->dev, "DAI Format master is not found\n"); + return -EINVAL; + } + + serial_control_mask = TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + serial_format &= TAS2552_DAIFMT_I2S_MASK; + break; + case SND_SOC_DAIFMT_DSP_A: + serial_format |= TAS2552_DAIFMT_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + serial_format |= TAS2552_DAIFMT_RIGHT_J; + break; + case SND_SOC_DAIFMT_LEFT_J: + serial_format |= TAS2552_DAIFMT_LEFT_J; + break; + default: + dev_vdbg(codec->dev, "DAI Format is not found\n"); + return -EINVAL; + } + + if (fmt & SND_SOC_DAIFMT_FORMAT_MASK) + serial_control_mask |= TAS2552_DATA_FORMAT_MASK; + + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, serial_control_mask, + serial_format); + + return 0; +} + +static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct tas2552_data *tas2552 = dev_get_drvdata(codec->dev); + + tas2552->mclk = freq; + + return 0; +} + +static int tas2552_mute(struct snd_soc_dai *dai, int mute) +{ + u8 cfg1_reg; + struct snd_soc_codec *codec = dai->codec; + + if (mute) + cfg1_reg = TAS2552_MUTE_MASK; + else + cfg1_reg = ~TAS2552_MUTE_MASK; + + snd_soc_update_bits(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK, cfg1_reg); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int tas2552_runtime_suspend(struct device *dev) +{ + struct tas2552_data *tas2552 = dev_get_drvdata(dev); + + tas2552_sw_shutdown(tas2552, 0); + + regcache_cache_only(tas2552->regmap, true); + regcache_mark_dirty(tas2552->regmap); + + if (tas2552->enable_gpio) + gpiod_set_value(tas2552->enable_gpio, 0); + + return 0; +} + +static int tas2552_runtime_resume(struct device *dev) +{ + struct tas2552_data *tas2552 = dev_get_drvdata(dev); + + if (tas2552->enable_gpio) + gpiod_set_value(tas2552->enable_gpio, 1); + + tas2552_sw_shutdown(tas2552, 1); + + regcache_cache_only(tas2552->regmap, false); + regcache_sync(tas2552->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops tas2552_pm = { + SET_RUNTIME_PM_OPS(tas2552_runtime_suspend, tas2552_runtime_resume, + NULL) +}; + +static void tas2552_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0); +} + +static struct snd_soc_dai_ops tas2552_speaker_dai_ops = { + .hw_params = tas2552_hw_params, + .set_sysclk = tas2552_set_dai_sysclk, + .set_fmt = tas2552_set_dai_fmt, + .shutdown = tas2552_shutdown, + .digital_mute = tas2552_mute, +}; + +/* Formats supported by TAS2552 driver. */ +#define TAS2552_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +/* TAS2552 dai structure. */ +static struct snd_soc_dai_driver tas2552_dai[] = { + { + .name = "tas2552-amplifier", + .playback = { + .stream_name = "Speaker", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = TAS2552_FORMATS, + }, + .ops = &tas2552_speaker_dai_ops, + }, +}; + +/* + * DAC digital volumes. From -7 to 24 dB in 1 dB steps + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 24); + +static const struct snd_kcontrol_new tas2552_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Driver Playback Volume", + TAS2552_PGA_GAIN, 0, 0x1f, 1, dac_tlv), +}; + +static const struct reg_default tas2552_init_regs[] = { + { TAS2552_RESERVED_0D, 0xc0 }, +}; + +static int tas2552_codec_probe(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + tas2552->codec = codec; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", + ret); + return ret; + } + + if (tas2552->enable_gpio) + gpiod_set_value(tas2552->enable_gpio, 1); + + ret = pm_runtime_get_sync(codec->dev); + if (ret < 0) { + dev_err(codec->dev, "Enabling device failed: %d\n", + ret); + goto probe_fail; + } + + snd_soc_write(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK | + TAS2552_PLL_SRC_BCLK); + snd_soc_write(codec, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL | + TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ); + snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I); + snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8); + snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL); + snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 | + TAS2552_APT_THRESH_2_1_7); + + ret = regmap_register_patch(tas2552->regmap, tas2552_init_regs, + ARRAY_SIZE(tas2552_init_regs)); + if (ret != 0) { + dev_err(codec->dev, "Failed to write init registers: %d\n", + ret); + goto patch_fail; + } + + snd_soc_write(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN | + TAS2552_BOOST_EN | TAS2552_APT_EN | + TAS2552_LIM_EN); + return 0; + +patch_fail: + pm_runtime_put(codec->dev); +probe_fail: + if (tas2552->enable_gpio) + gpiod_set_value(tas2552->enable_gpio, 0); + + regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + return -EIO; +} + +static int tas2552_codec_remove(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + pm_runtime_put(codec->dev); + + if (tas2552->enable_gpio) + gpiod_set_value(tas2552->enable_gpio, 0); + + return 0; +}; + +#ifdef CONFIG_PM +static int tas2552_suspend(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) + dev_err(codec->dev, "Failed to disable supplies: %d\n", + ret); + return 0; +} + +static int tas2552_resume(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", + ret); + } + + return 0; +} +#else +#define tas2552_suspend NULL +#define tas2552_resume NULL +#endif + +static struct snd_soc_codec_driver soc_codec_dev_tas2552 = { + .probe = tas2552_codec_probe, + .remove = tas2552_codec_remove, + .suspend = tas2552_suspend, + .resume = tas2552_resume, + .controls = tas2552_snd_controls, + .num_controls = ARRAY_SIZE(tas2552_snd_controls), +}; + +static const struct regmap_config tas2552_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS2552_MAX_REG, + .reg_defaults = tas2552_reg_defs, + .num_reg_defaults = ARRAY_SIZE(tas2552_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +static int tas2552_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev; + struct tas2552_data *data; + int ret; + int i; + + dev = &client->dev; + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->enable_gpio = devm_gpiod_get(dev, "enable"); + if (IS_ERR(data->enable_gpio)) { + ret = PTR_ERR(data->enable_gpio); + if (ret != -ENOENT && ret != -ENOSYS) + return ret; + + data->enable_gpio = NULL; + } else { + gpiod_direction_output(data->enable_gpio, 0); + } + + data->tas2552_client = client; + data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data->supplies); i++) + data->supplies[i].supply = tas2552_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies), + data->supplies); + if (ret != 0) { + dev_err(dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + pm_runtime_set_active(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_enable(&client->dev); + pm_runtime_mark_last_busy(&client->dev); + pm_runtime_put_sync_autosuspend(&client->dev); + + dev_set_drvdata(&client->dev, data); + + ret = snd_soc_register_codec(&client->dev, + &soc_codec_dev_tas2552, + tas2552_dai, ARRAY_SIZE(tas2552_dai)); + if (ret < 0) + dev_err(&client->dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static int tas2552_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id tas2552_id[] = { + { "tas2552", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas2552_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tas2552_of_match[] = { + { .compatible = "ti,tas2552", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tas2552_of_match); +#endif + +static struct i2c_driver tas2552_i2c_driver = { + .driver = { + .name = "tas2552", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tas2552_of_match), + .pm = &tas2552_pm, + }, + .probe = tas2552_probe, + .remove = tas2552_i2c_remove, + .id_table = tas2552_id, +}; + +module_i2c_driver(tas2552_i2c_driver); + +MODULE_AUTHOR("Dan Muprhy <dmurphy@ti.com>"); +MODULE_DESCRIPTION("TAS2552 Audio amplifier driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h new file mode 100644 index 000000000000..6cea8f31bf88 --- /dev/null +++ b/sound/soc/codecs/tas2552.h @@ -0,0 +1,129 @@ +/* + * tas2552.h - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __TAS2552_H__ +#define __TAS2552_H__ + +/* Register Address Map */ +#define TAS2552_DEVICE_STATUS 0x00 +#define TAS2552_CFG_1 0x01 +#define TAS2552_CFG_2 0x02 +#define TAS2552_CFG_3 0x03 +#define TAS2552_DOUT 0x04 +#define TAS2552_SER_CTRL_1 0x05 +#define TAS2552_SER_CTRL_2 0x06 +#define TAS2552_OUTPUT_DATA 0x07 +#define TAS2552_PLL_CTRL_1 0x08 +#define TAS2552_PLL_CTRL_2 0x09 +#define TAS2552_PLL_CTRL_3 0x0a +#define TAS2552_BTIP 0x0b +#define TAS2552_BTS_CTRL 0x0c +#define TAS2552_RESERVED_0D 0x0d +#define TAS2552_LIMIT_RATE_HYS 0x0e +#define TAS2552_LIMIT_RELEASE 0x0f +#define TAS2552_LIMIT_INT_COUNT 0x10 +#define TAS2552_PDM_CFG 0x11 +#define TAS2552_PGA_GAIN 0x12 +#define TAS2552_EDGE_RATE_CTRL 0x13 +#define TAS2552_BOOST_PT_CTRL 0x14 +#define TAS2552_VER_NUM 0x16 +#define TAS2552_VBAT_DATA 0x19 +#define TAS2552_MAX_REG 0x20 + +/* CFG1 Register Masks */ +#define TAS2552_MUTE_MASK (1 << 2) +#define TAS2552_SWS_MASK (1 << 1) +#define TAS2552_WCLK_MASK 0x07 +#define TAS2552_CLASSD_EN_MASK (1 << 7) + +/* CFG2 Register Masks */ +#define TAS2552_CLASSD_EN (1 << 7) +#define TAS2552_BOOST_EN (1 << 6) +#define TAS2552_APT_EN (1 << 5) +#define TAS2552_PLL_ENABLE (1 << 3) +#define TAS2552_LIM_EN (1 << 2) +#define TAS2552_IVSENSE_EN (1 << 1) + +/* CFG3 Register Masks */ +#define TAS2552_WORD_CLK_MASK (1 << 7) +#define TAS2552_BIT_CLK_MASK (1 << 6) +#define TAS2552_DATA_FORMAT_MASK (0x11 << 2) + +#define TAS2552_DAIFMT_I2S_MASK 0xf3 +#define TAS2552_DAIFMT_DSP (1 << 3) +#define TAS2552_DAIFMT_RIGHT_J (1 << 4) +#define TAS2552_DAIFMT_LEFT_J (0x11 << 3) + +#define TAS2552_PLL_SRC_MCLK 0x00 +#define TAS2552_PLL_SRC_BCLK (1 << 3) +#define TAS2552_PLL_SRC_IVCLKIN (1 << 4) +#define TAS2552_PLL_SRC_1_8_FIXED (0x11 << 3) + +#define TAS2552_DIN_SRC_SEL_MUTED 0x00 +#define TAS2552_DIN_SRC_SEL_LEFT (1 << 4) +#define TAS2552_DIN_SRC_SEL_RIGHT (1 << 5) +#define TAS2552_DIN_SRC_SEL_AVG_L_R (0x11 << 4) + +#define TAS2552_PDM_IN_SEL (1 << 5) +#define TAS2552_I2S_OUT_SEL (1 << 6) +#define TAS2552_ANALOG_IN_SEL (1 << 7) + +/* CFG3 WCLK Dividers */ +#define TAS2552_8KHZ 0x00 +#define TAS2552_11_12KHZ (1 << 1) +#define TAS2552_16KHZ (1 << 2) +#define TAS2552_22_24KHZ (1 << 3) +#define TAS2552_32KHZ (1 << 4) +#define TAS2552_44_48KHZ (1 << 5) +#define TAS2552_88_96KHZ (1 << 6) +#define TAS2552_176_192KHZ (1 << 7) + +/* OUTPUT_DATA register */ +#define TAS2552_PDM_DATA_I 0x00 +#define TAS2552_PDM_DATA_V (1 << 6) +#define TAS2552_PDM_DATA_I_V (1 << 7) +#define TAS2552_PDM_DATA_V_I (0x11 << 6) + +/* PDM CFG Register */ +#define TAS2552_PDM_DATA_ES_RISE 0x4 + +#define TAS2552_PDM_PLL_CLK_SEL 0x00 +#define TAS2552_PDM_IV_CLK_SEL (1 << 1) +#define TAS2552_PDM_BCLK_SEL (1 << 2) +#define TAS2552_PDM_MCLK_SEL (1 << 3) + +/* Boost pass-through register */ +#define TAS2552_APT_DELAY_50 0x00 +#define TAS2552_APT_DELAY_75 (1 << 1) +#define TAS2552_APT_DELAY_125 (1 << 2) +#define TAS2552_APT_DELAY_200 (1 << 3) + +#define TAS2552_APT_THRESH_2_5 0x00 +#define TAS2552_APT_THRESH_1_7 (1 << 3) +#define TAS2552_APT_THRESH_1_4_1_1 (1 << 4) +#define TAS2552_APT_THRESH_2_1_7 (0x11 << 2) + +/* PLL Control Register */ +#define TAS2552_245MHZ_CLK 24576000 +#define TAS2552_225MHZ_CLK 22579200 +#define TAS2552_PLL_J_MASK 0x7f +#define TAS2552_PLL_D_UPPER_MASK 0x3f +#define TAS2552_PLL_D_LOWER_MASK 0xff +#define TAS2552_PLL_BYPASS_MASK 0x80 +#define TAS2552_PLL_BYPASS 0x80 + +#endif diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c index d48491a4a19d..be7194b43b7a 100644 --- a/sound/soc/codecs/tas5086.c +++ b/sound/soc/codecs/tas5086.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/spi/spi.h> #include <linux/of.h> #include <linux/of_device.h> @@ -240,6 +241,10 @@ static int tas5086_reg_read(void *context, unsigned int reg, return 0; } +static const char * const supply_names[] = { + "dvdd", "avdd" +}; + struct tas5086_private { struct regmap *regmap; unsigned int mclk, sclk; @@ -251,6 +256,7 @@ struct tas5086_private { int rate; /* GPIO driving Reset pin, if any */ int gpio_nreset; + struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; }; static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; @@ -773,6 +779,8 @@ static int tas5086_soc_suspend(struct snd_soc_codec *codec) if (ret < 0) return ret; + regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); + return 0; } @@ -781,6 +789,10 @@ static int tas5086_soc_resume(struct snd_soc_codec *codec) struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int ret; + ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); + if (ret < 0) + return ret; + tas5086_reset(priv); regcache_mark_dirty(priv->regmap); @@ -812,6 +824,12 @@ static int tas5086_probe(struct snd_soc_codec *codec) struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int i, ret; + ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); + if (ret < 0) { + dev_err(codec->dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + priv->pwm_start_mid_z = 0; priv->charge_period = 1300000; /* hardware default is 1300 ms */ @@ -832,16 +850,22 @@ static int tas5086_probe(struct snd_soc_codec *codec) } } + tas5086_reset(priv); ret = tas5086_init(codec->dev, priv); if (ret < 0) - return ret; + goto exit_disable_regulators; /* set master volume to 0 dB */ ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); if (ret < 0) - return ret; + goto exit_disable_regulators; return 0; + +exit_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); + + return ret; } static int tas5086_remove(struct snd_soc_codec *codec) @@ -852,6 +876,8 @@ static int tas5086_remove(struct snd_soc_codec *codec) /* Set codec to the reset state */ gpio_set_value(priv->gpio_nreset, 0); + regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); + return 0; }; @@ -900,6 +926,16 @@ static int tas5086_i2c_probe(struct i2c_client *i2c, if (!priv) return -ENOMEM; + for (i = 0; i < ARRAY_SIZE(supply_names); i++) + priv->supplies[i].supply = supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies), + priv->supplies); + if (ret < 0) { + dev_err(dev, "Failed to get regulators: %d\n", ret); + return ret; + } + priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap); if (IS_ERR(priv->regmap)) { ret = PTR_ERR(priv->regmap); @@ -919,21 +955,34 @@ static int tas5086_i2c_probe(struct i2c_client *i2c, gpio_nreset = -EINVAL; priv->gpio_nreset = gpio_nreset; + + ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); + if (ret < 0) { + dev_err(dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + tas5086_reset(priv); /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); - if (ret < 0) - return ret; - - if (i != 0x3) { + if (ret == 0 && i != 0x3) { dev_err(dev, "Failed to identify TAS5086 codec (got %02x)\n", i); - return -ENODEV; + ret = -ENODEV; } - return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, - &tas5086_dai, 1); + /* + * The chip has been identified, so we can turn off the power + * again until the dai link is set up. + */ + regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); + + if (ret == 0) + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, + &tas5086_dai, 1); + + return ret; } static int tas5086_i2c_remove(struct i2c_client *i2c) diff --git a/sound/soc/sirf/Kconfig b/sound/soc/sirf/Kconfig index 89e89429b04a..840058dcad09 100644 --- a/sound/soc/sirf/Kconfig +++ b/sound/soc/sirf/Kconfig @@ -12,3 +12,9 @@ config SND_SOC_SIRF_AUDIO config SND_SOC_SIRF_AUDIO_PORT select REGMAP_MMIO tristate + +config SND_SOC_SIRF_USP + tristate "SoC Audio (I2S protocol) for SiRF SoC USP interface" + depends on SND_SOC_SIRF + select REGMAP_MMIO + tristate diff --git a/sound/soc/sirf/Makefile b/sound/soc/sirf/Makefile index 913b93231d4e..dd917f20f12f 100644 --- a/sound/soc/sirf/Makefile +++ b/sound/soc/sirf/Makefile @@ -1,5 +1,7 @@ snd-soc-sirf-audio-objs := sirf-audio.o snd-soc-sirf-audio-port-objs := sirf-audio-port.o +snd-soc-sirf-usp-objs := sirf-usp.o obj-$(CONFIG_SND_SOC_SIRF_AUDIO) += snd-soc-sirf-audio.o obj-$(CONFIG_SND_SOC_SIRF_AUDIO_PORT) += snd-soc-sirf-audio-port.o +obj-$(CONFIG_SND_SOC_SIRF_USP) += snd-soc-sirf-usp.o diff --git a/sound/soc/sirf/sirf-usp.c b/sound/soc/sirf/sirf-usp.c new file mode 100644 index 000000000000..3a730374e259 --- /dev/null +++ b/sound/soc/sirf/sirf-usp.c @@ -0,0 +1,415 @@ +/* + * SiRF USP in I2S/DSP mode + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> +#include <sound/dmaengine_pcm.h> + +#include "sirf-usp.h" + +struct sirf_usp { + struct regmap *regmap; + struct clk *clk; + u32 mode1_reg; + u32 mode2_reg; + int daifmt_format; + struct snd_dmaengine_dai_dma_data playback_dma_data; + struct snd_dmaengine_dai_dma_data capture_dma_data; +}; + +static void sirf_usp_tx_enable(struct sirf_usp *usp) +{ + regmap_update_bits(usp->regmap, USP_TX_FIFO_OP, + USP_TX_FIFO_RESET, USP_TX_FIFO_RESET); + regmap_write(usp->regmap, USP_TX_FIFO_OP, 0); + + regmap_update_bits(usp->regmap, USP_TX_FIFO_OP, + USP_TX_FIFO_START, USP_TX_FIFO_START); + + regmap_update_bits(usp->regmap, USP_TX_RX_ENABLE, + USP_TX_ENA, USP_TX_ENA); +} + +static void sirf_usp_tx_disable(struct sirf_usp *usp) +{ + regmap_update_bits(usp->regmap, USP_TX_RX_ENABLE, + USP_TX_ENA, ~USP_TX_ENA); + /* FIFO stop */ + regmap_write(usp->regmap, USP_TX_FIFO_OP, 0); +} + +static void sirf_usp_rx_enable(struct sirf_usp *usp) +{ + regmap_update_bits(usp->regmap, USP_RX_FIFO_OP, + USP_RX_FIFO_RESET, USP_RX_FIFO_RESET); + regmap_write(usp->regmap, USP_RX_FIFO_OP, 0); + + regmap_update_bits(usp->regmap, USP_RX_FIFO_OP, + USP_RX_FIFO_START, USP_RX_FIFO_START); + + regmap_update_bits(usp->regmap, USP_TX_RX_ENABLE, + USP_RX_ENA, USP_RX_ENA); +} + +static void sirf_usp_rx_disable(struct sirf_usp *usp) +{ + regmap_update_bits(usp->regmap, USP_TX_RX_ENABLE, + USP_RX_ENA, ~USP_RX_ENA); + /* FIFO stop */ + regmap_write(usp->regmap, USP_RX_FIFO_OP, 0); +} + +static int sirf_usp_pcm_dai_probe(struct snd_soc_dai *dai) +{ + struct sirf_usp *usp = snd_soc_dai_get_drvdata(dai); + snd_soc_dai_init_dma_data(dai, &usp->playback_dma_data, + &usp->capture_dma_data); + return 0; +} + +static int sirf_usp_pcm_set_dai_fmt(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct sirf_usp *usp = snd_soc_dai_get_drvdata(dai); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + break; + default: + dev_err(dai->dev, "Only CBM and CFM supported\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_DSP_A: + usp->daifmt_format = (fmt & SND_SOC_DAIFMT_FORMAT_MASK); + break; + default: + dev_err(dai->dev, "Only I2S and DSP_A format supported\n"); + return -EINVAL; + } + + return 0; +} + +static void sirf_usp_i2s_init(struct sirf_usp *usp) +{ + /* Configure RISC mode */ + regmap_update_bits(usp->regmap, USP_RISC_DSP_MODE, + USP_RISC_DSP_SEL, ~USP_RISC_DSP_SEL); + + /* + * Configure DMA IO Length register + * Set no limit, USP can receive data continuously until it is diabled + */ + regmap_write(usp->regmap, USP_TX_DMA_IO_LEN, 0); + regmap_write(usp->regmap, USP_RX_DMA_IO_LEN, 0); + + /* Configure Mode2 register */ + regmap_write(usp->regmap, USP_MODE2, (1 << USP_RXD_DELAY_LEN_OFFSET) | + (0 << USP_TXD_DELAY_LEN_OFFSET) | + USP_TFS_CLK_SLAVE_MODE | USP_RFS_CLK_SLAVE_MODE); + + /* Configure Mode1 register */ + regmap_write(usp->regmap, USP_MODE1, + USP_SYNC_MODE | USP_EN | USP_TXD_ACT_EDGE_FALLING | + USP_RFS_ACT_LEVEL_LOGIC1 | USP_TFS_ACT_LEVEL_LOGIC1 | + USP_TX_UFLOW_REPEAT_ZERO | USP_CLOCK_MODE_SLAVE); + + /* Configure RX DMA IO Control register */ + regmap_write(usp->regmap, USP_RX_DMA_IO_CTRL, 0); + + /* Congiure RX FIFO Control register */ + regmap_write(usp->regmap, USP_RX_FIFO_CTRL, + (USP_RX_FIFO_THRESHOLD << USP_RX_FIFO_THD_OFFSET) | + (USP_TX_RX_FIFO_WIDTH_DWORD << USP_RX_FIFO_WIDTH_OFFSET)); + + /* Congiure RX FIFO Level Check register */ + regmap_write(usp->regmap, USP_RX_FIFO_LEVEL_CHK, + RX_FIFO_SC(0x04) | RX_FIFO_LC(0x0E) | RX_FIFO_HC(0x1B)); + + /* Configure TX DMA IO Control register*/ + regmap_write(usp->regmap, USP_TX_DMA_IO_CTRL, 0); + + /* Configure TX FIFO Control register */ + regmap_write(usp->regmap, USP_TX_FIFO_CTRL, + (USP_TX_FIFO_THRESHOLD << USP_TX_FIFO_THD_OFFSET) | + (USP_TX_RX_FIFO_WIDTH_DWORD << USP_TX_FIFO_WIDTH_OFFSET)); + /* Congiure TX FIFO Level Check register */ + regmap_write(usp->regmap, USP_TX_FIFO_LEVEL_CHK, + TX_FIFO_SC(0x1B) | TX_FIFO_LC(0x0E) | TX_FIFO_HC(0x04)); +} + +static int sirf_usp_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct sirf_usp *usp = snd_soc_dai_get_drvdata(dai); + u32 data_len, frame_len, shifter_len; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + data_len = 16; + frame_len = 16; + break; + case SNDRV_PCM_FORMAT_S24_LE: + data_len = 24; + frame_len = 32; + break; + case SNDRV_PCM_FORMAT_S24_3LE: + data_len = 24; + frame_len = 24; + break; + default: + dev_err(dai->dev, "Format unsupported\n"); + return -EINVAL; + } + + shifter_len = data_len; + + switch (usp->daifmt_format) { + case SND_SOC_DAIFMT_I2S: + regmap_update_bits(usp->regmap, USP_RX_FRAME_CTRL, + USP_I2S_SYNC_CHG, USP_I2S_SYNC_CHG); + break; + case SND_SOC_DAIFMT_DSP_A: + regmap_update_bits(usp->regmap, USP_RX_FRAME_CTRL, + USP_I2S_SYNC_CHG, 0); + frame_len = data_len * params_channels(params); + data_len = frame_len; + break; + default: + dev_err(dai->dev, "Only support I2S and DSP_A mode\n"); + return -EINVAL; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + regmap_update_bits(usp->regmap, USP_TX_FRAME_CTRL, + USP_TXC_DATA_LEN_MASK | USP_TXC_FRAME_LEN_MASK + | USP_TXC_SHIFTER_LEN_MASK | USP_TXC_SLAVE_CLK_SAMPLE, + ((data_len - 1) << USP_TXC_DATA_LEN_OFFSET) + | ((frame_len - 1) << USP_TXC_FRAME_LEN_OFFSET) + | ((shifter_len - 1) << USP_TXC_SHIFTER_LEN_OFFSET) + | USP_TXC_SLAVE_CLK_SAMPLE); + else + regmap_update_bits(usp->regmap, USP_RX_FRAME_CTRL, + USP_RXC_DATA_LEN_MASK | USP_RXC_FRAME_LEN_MASK + | USP_RXC_SHIFTER_LEN_MASK | USP_SINGLE_SYNC_MODE, + ((data_len - 1) << USP_RXC_DATA_LEN_OFFSET) + | ((frame_len - 1) << USP_RXC_FRAME_LEN_OFFSET) + | ((shifter_len - 1) << USP_RXC_SHIFTER_LEN_OFFSET) + | USP_SINGLE_SYNC_MODE); + + return 0; +} + +static int sirf_usp_pcm_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct sirf_usp *usp = snd_soc_dai_get_drvdata(dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + sirf_usp_tx_enable(usp); + else + sirf_usp_rx_enable(usp); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + sirf_usp_tx_disable(usp); + else + sirf_usp_rx_disable(usp); + break; + } + + return 0; +} + +static const struct snd_soc_dai_ops sirf_usp_pcm_dai_ops = { + .trigger = sirf_usp_pcm_trigger, + .set_fmt = sirf_usp_pcm_set_dai_fmt, + .hw_params = sirf_usp_pcm_hw_params, +}; + +static struct snd_soc_dai_driver sirf_usp_pcm_dai = { + .probe = sirf_usp_pcm_dai_probe, + .name = "sirf-usp-pcm", + .id = 0, + .playback = { + .stream_name = "SiRF USP PCM Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S24_3LE, + }, + .capture = { + .stream_name = "SiRF USP PCM Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S24_3LE, + }, + .ops = &sirf_usp_pcm_dai_ops, +}; + +static int sirf_usp_pcm_runtime_suspend(struct device *dev) +{ + struct sirf_usp *usp = dev_get_drvdata(dev); + clk_disable_unprepare(usp->clk); + return 0; +} + +static int sirf_usp_pcm_runtime_resume(struct device *dev) +{ + struct sirf_usp *usp = dev_get_drvdata(dev); + int ret; + ret = clk_prepare_enable(usp->clk); + if (ret) { + dev_err(dev, "clk_enable failed: %d\n", ret); + return ret; + } + sirf_usp_i2s_init(usp); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sirf_usp_pcm_suspend(struct device *dev) +{ + struct sirf_usp *usp = dev_get_drvdata(dev); + + if (!pm_runtime_status_suspended(dev)) { + regmap_read(usp->regmap, USP_MODE1, &usp->mode1_reg); + regmap_read(usp->regmap, USP_MODE2, &usp->mode2_reg); + sirf_usp_pcm_runtime_suspend(dev); + } + return 0; +} + +static int sirf_usp_pcm_resume(struct device *dev) +{ + struct sirf_usp *usp = dev_get_drvdata(dev); + int ret; + + if (!pm_runtime_status_suspended(dev)) { + ret = sirf_usp_pcm_runtime_resume(dev); + if (ret) + return ret; + regmap_write(usp->regmap, USP_MODE1, usp->mode1_reg); + regmap_write(usp->regmap, USP_MODE2, usp->mode2_reg); + } + return 0; +} +#endif + +static const struct snd_soc_component_driver sirf_usp_component = { + .name = "sirf-usp", +}; + +static const struct regmap_config sirf_usp_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = USP_RX_FIFO_DATA, + .cache_type = REGCACHE_NONE, +}; + +static int sirf_usp_pcm_probe(struct platform_device *pdev) +{ + int ret; + struct sirf_usp *usp; + void __iomem *base; + struct resource *mem_res; + + usp = devm_kzalloc(&pdev->dev, sizeof(struct sirf_usp), + GFP_KERNEL); + if (!usp) + return -ENOMEM; + + platform_set_drvdata(pdev, usp); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap(&pdev->dev, mem_res->start, + resource_size(mem_res)); + if (base == NULL) + return -ENOMEM; + usp->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &sirf_usp_regmap_config); + if (IS_ERR(usp->regmap)) + return PTR_ERR(usp->regmap); + + usp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(usp->clk)) { + dev_err(&pdev->dev, "Get clock failed.\n"); + return PTR_ERR(usp->clk); + } + + pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + ret = sirf_usp_pcm_runtime_resume(&pdev->dev); + if (ret) + return ret; + } + + ret = devm_snd_soc_register_component(&pdev->dev, &sirf_usp_component, + &sirf_usp_pcm_dai, 1); + if (ret) { + dev_err(&pdev->dev, "Register Audio SoC dai failed.\n"); + return ret; + } + return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); +} + +static int sirf_usp_pcm_remove(struct platform_device *pdev) +{ + if (!pm_runtime_enabled(&pdev->dev)) + sirf_usp_pcm_runtime_suspend(&pdev->dev); + else + pm_runtime_disable(&pdev->dev); + return 0; +} + +static const struct of_device_id sirf_usp_pcm_of_match[] = { + { .compatible = "sirf,prima2-usp-pcm", }, + {} +}; +MODULE_DEVICE_TABLE(of, sirf_usp_pcm_of_match); + +static const struct dev_pm_ops sirf_usp_pcm_pm_ops = { + SET_RUNTIME_PM_OPS(sirf_usp_pcm_runtime_suspend, + sirf_usp_pcm_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(sirf_usp_pcm_suspend, sirf_usp_pcm_resume) +}; + +static struct platform_driver sirf_usp_pcm_driver = { + .driver = { + .name = "sirf-usp-pcm", + .owner = THIS_MODULE, + .of_match_table = sirf_usp_pcm_of_match, + .pm = &sirf_usp_pcm_pm_ops, + }, + .probe = sirf_usp_pcm_probe, + .remove = sirf_usp_pcm_remove, +}; + +module_platform_driver(sirf_usp_pcm_driver); + +MODULE_DESCRIPTION("SiRF SoC USP PCM bus driver"); +MODULE_AUTHOR("RongJun Ying <Rongjun.Ying@csr.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/sirf/sirf-usp.h b/sound/soc/sirf/sirf-usp.h new file mode 100644 index 000000000000..bf0201cb15bc --- /dev/null +++ b/sound/soc/sirf/sirf-usp.h @@ -0,0 +1,293 @@ +/* + * arch/arm/mach-prima2/include/mach/sirfsoc_usp.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _SIRF_USP_H +#define _SIRF_USP_H + +/* USP Registers */ +#define USP_MODE1 0x00 +#define USP_MODE2 0x04 +#define USP_TX_FRAME_CTRL 0x08 +#define USP_RX_FRAME_CTRL 0x0C +#define USP_TX_RX_ENABLE 0x10 +#define USP_INT_ENABLE 0x14 +#define USP_INT_STATUS 0x18 +#define USP_PIN_IO_DATA 0x1C +#define USP_RISC_DSP_MODE 0x20 +#define USP_AYSNC_PARAM_REG 0x24 +#define USP_IRDA_X_MODE_DIV 0x28 +#define USP_SM_CFG 0x2C +#define USP_TX_DMA_IO_CTRL 0x100 +#define USP_TX_DMA_IO_LEN 0x104 +#define USP_TX_FIFO_CTRL 0x108 +#define USP_TX_FIFO_LEVEL_CHK 0x10C +#define USP_TX_FIFO_OP 0x110 +#define USP_TX_FIFO_STATUS 0x114 +#define USP_TX_FIFO_DATA 0x118 +#define USP_RX_DMA_IO_CTRL 0x120 +#define USP_RX_DMA_IO_LEN 0x124 +#define USP_RX_FIFO_CTRL 0x128 +#define USP_RX_FIFO_LEVEL_CHK 0x12C +#define USP_RX_FIFO_OP 0x130 +#define USP_RX_FIFO_STATUS 0x134 +#define USP_RX_FIFO_DATA 0x138 + +/* USP MODE register-1 */ +#define USP_SYNC_MODE 0x00000001 +#define USP_CLOCK_MODE_SLAVE 0x00000002 +#define USP_LOOP_BACK_EN 0x00000004 +#define USP_HPSIR_EN 0x00000008 +#define USP_ENDIAN_CTRL_LSBF 0x00000010 +#define USP_EN 0x00000020 +#define USP_RXD_ACT_EDGE_FALLING 0x00000040 +#define USP_TXD_ACT_EDGE_FALLING 0x00000080 +#define USP_RFS_ACT_LEVEL_LOGIC1 0x00000100 +#define USP_TFS_ACT_LEVEL_LOGIC1 0x00000200 +#define USP_SCLK_IDLE_MODE_TOGGLE 0x00000400 +#define USP_SCLK_IDLE_LEVEL_LOGIC1 0x00000800 +#define USP_SCLK_PIN_MODE_IO 0x00001000 +#define USP_RFS_PIN_MODE_IO 0x00002000 +#define USP_TFS_PIN_MODE_IO 0x00004000 +#define USP_RXD_PIN_MODE_IO 0x00008000 +#define USP_TXD_PIN_MODE_IO 0x00010000 +#define USP_SCLK_IO_MODE_INPUT 0x00020000 +#define USP_RFS_IO_MODE_INPUT 0x00040000 +#define USP_TFS_IO_MODE_INPUT 0x00080000 +#define USP_RXD_IO_MODE_INPUT 0x00100000 +#define USP_TXD_IO_MODE_INPUT 0x00200000 +#define USP_IRDA_WIDTH_DIV_MASK 0x3FC00000 +#define USP_IRDA_WIDTH_DIV_OFFSET 0 +#define USP_IRDA_IDLE_LEVEL_HIGH 0x40000000 +#define USP_TX_UFLOW_REPEAT_ZERO 0x80000000 +#define USP_TX_ENDIAN_MODE 0x00000020 +#define USP_RX_ENDIAN_MODE 0x00000020 + +/* USP Mode Register-2 */ +#define USP_RXD_DELAY_LEN_MASK 0x000000FF +#define USP_RXD_DELAY_LEN_OFFSET 0 + +#define USP_TXD_DELAY_LEN_MASK 0x0000FF00 +#define USP_TXD_DELAY_LEN_OFFSET 8 + +#define USP_ENA_CTRL_MODE 0x00010000 +#define USP_FRAME_CTRL_MODE 0x00020000 +#define USP_TFS_SOURCE_MODE 0x00040000 +#define USP_TFS_MS_MODE 0x00080000 +#define USP_CLK_DIVISOR_MASK 0x7FE00000 +#define USP_CLK_DIVISOR_OFFSET 21 + +#define USP_TFS_CLK_SLAVE_MODE (1<<20) +#define USP_RFS_CLK_SLAVE_MODE (1<<19) + +#define USP_IRDA_DATA_WIDTH 0x80000000 + +/* USP Transmit Frame Control Register */ + +#define USP_TXC_DATA_LEN_MASK 0x000000FF +#define USP_TXC_DATA_LEN_OFFSET 0 + +#define USP_TXC_SYNC_LEN_MASK 0x0000FF00 +#define USP_TXC_SYNC_LEN_OFFSET 8 + +#define USP_TXC_FRAME_LEN_MASK 0x00FF0000 +#define USP_TXC_FRAME_LEN_OFFSET 16 + +#define USP_TXC_SHIFTER_LEN_MASK 0x1F000000 +#define USP_TXC_SHIFTER_LEN_OFFSET 24 + +#define USP_TXC_SLAVE_CLK_SAMPLE 0x20000000 + +#define USP_TXC_CLK_DIVISOR_MASK 0xC0000000 +#define USP_TXC_CLK_DIVISOR_OFFSET 30 + +/* USP Receive Frame Control Register */ + +#define USP_RXC_DATA_LEN_MASK 0x000000FF +#define USP_RXC_DATA_LEN_OFFSET 0 + +#define USP_RXC_FRAME_LEN_MASK 0x0000FF00 +#define USP_RXC_FRAME_LEN_OFFSET 8 + +#define USP_RXC_SHIFTER_LEN_MASK 0x001F0000 +#define USP_RXC_SHIFTER_LEN_OFFSET 16 + +#define USP_START_EDGE_MODE 0x00800000 +#define USP_I2S_SYNC_CHG 0x00200000 + +#define USP_RXC_CLK_DIVISOR_MASK 0x0F000000 +#define USP_RXC_CLK_DIVISOR_OFFSET 24 +#define USP_SINGLE_SYNC_MODE 0x00400000 + +/* Tx - RX Enable Register */ + +#define USP_RX_ENA 0x00000001 +#define USP_TX_ENA 0x00000002 + +/* USP Interrupt Enable and status Register */ +#define USP_RX_DONE_INT 0x00000001 +#define USP_TX_DONE_INT 0x00000002 +#define USP_RX_OFLOW_INT 0x00000004 +#define USP_TX_UFLOW_INT 0x00000008 +#define USP_RX_IO_DMA_INT 0x00000010 +#define USP_TX_IO_DMA_INT 0x00000020 +#define USP_RXFIFO_FULL_INT 0x00000040 +#define USP_TXFIFO_EMPTY_INT 0x00000080 +#define USP_RXFIFO_THD_INT 0x00000100 +#define USP_TXFIFO_THD_INT 0x00000200 +#define USP_UART_FRM_ERR_INT 0x00000400 +#define USP_RX_TIMEOUT_INT 0x00000800 +#define USP_TX_ALLOUT_INT 0x00001000 +#define USP_RXD_BREAK_INT 0x00008000 + +/* All possible TX interruots */ +#define USP_TX_INTERRUPT (USP_TX_DONE_INT|USP_TX_UFLOW_INT|\ + USP_TX_IO_DMA_INT|\ + USP_TXFIFO_EMPTY_INT|\ + USP_TXFIFO_THD_INT) +/* All possible RX interruots */ +#define USP_RX_INTERRUPT (USP_RX_DONE_INT|USP_RX_OFLOW_INT|\ + USP_RX_IO_DMA_INT|\ + USP_RXFIFO_FULL_INT|\ + USP_RXFIFO_THD_INT|\ + USP_RXFIFO_THD_INT|USP_RX_TIMEOUT_INT) + +#define USP_INT_ALL 0x1FFF + +/* USP Pin I/O Data Register */ + +#define USP_RFS_PIN_VALUE_MASK 0x00000001 +#define USP_TFS_PIN_VALUE_MASK 0x00000002 +#define USP_RXD_PIN_VALUE_MASK 0x00000004 +#define USP_TXD_PIN_VALUE_MASK 0x00000008 +#define USP_SCLK_PIN_VALUE_MASK 0x00000010 + +/* USP RISC/DSP Mode Register */ +#define USP_RISC_DSP_SEL 0x00000001 + +/* USP ASYNC PARAMETER Register*/ + +#define USP_ASYNC_TIMEOUT_MASK 0x0000FFFF +#define USP_ASYNC_TIMEOUT_OFFSET 0 +#define USP_ASYNC_TIMEOUT(x) (((x)&USP_ASYNC_TIMEOUT_MASK) \ + <<USP_ASYNC_TIMEOUT_OFFSET) + +#define USP_ASYNC_DIV2_MASK 0x003F0000 +#define USP_ASYNC_DIV2_OFFSET 16 + +/* USP TX DMA I/O MODE Register */ +#define USP_TX_MODE_IO 0x00000001 + +/* USP TX DMA I/O Length Register */ +#define USP_TX_DATA_LEN_MASK 0xFFFFFFFF +#define USP_TX_DATA_LEN_OFFSET 0 + +/* USP TX FIFO Control Register */ +#define USP_TX_FIFO_WIDTH_MASK 0x00000003 +#define USP_TX_FIFO_WIDTH_OFFSET 0 + +#define USP_TX_FIFO_THD_MASK 0x000001FC +#define USP_TX_FIFO_THD_OFFSET 2 + +/* USP TX FIFO Level Check Register */ +#define USP_TX_FIFO_LEVEL_CHECK_MASK 0x1F +#define USP_TX_FIFO_SC_OFFSET 0 +#define USP_TX_FIFO_LC_OFFSET 10 +#define USP_TX_FIFO_HC_OFFSET 20 + +#define TX_FIFO_SC(x) (((x) & USP_TX_FIFO_LEVEL_CHECK_MASK) \ + << USP_TX_FIFO_SC_OFFSET) +#define TX_FIFO_LC(x) (((x) & USP_TX_FIFO_LEVEL_CHECK_MASK) \ + << USP_TX_FIFO_LC_OFFSET) +#define TX_FIFO_HC(x) (((x) & USP_TX_FIFO_LEVEL_CHECK_MASK) \ + << USP_TX_FIFO_HC_OFFSET) + +/* USP TX FIFO Operation Register */ +#define USP_TX_FIFO_RESET 0x00000001 +#define USP_TX_FIFO_START 0x00000002 + +/* USP TX FIFO Status Register */ +#define USP_TX_FIFO_LEVEL_MASK 0x0000007F +#define USP_TX_FIFO_LEVEL_OFFSET 0 + +#define USP_TX_FIFO_FULL 0x00000080 +#define USP_TX_FIFO_EMPTY 0x00000100 + +/* USP TX FIFO Data Register */ +#define USP_TX_FIFO_DATA_MASK 0xFFFFFFFF +#define USP_TX_FIFO_DATA_OFFSET 0 + +/* USP RX DMA I/O MODE Register */ +#define USP_RX_MODE_IO 0x00000001 +#define USP_RX_DMA_FLUSH 0x00000004 + +/* USP RX DMA I/O Length Register */ +#define USP_RX_DATA_LEN_MASK 0xFFFFFFFF +#define USP_RX_DATA_LEN_OFFSET 0 + +/* USP RX FIFO Control Register */ +#define USP_RX_FIFO_WIDTH_MASK 0x00000003 +#define USP_RX_FIFO_WIDTH_OFFSET 0 + +#define USP_RX_FIFO_THD_MASK 0x000001FC +#define USP_RX_FIFO_THD_OFFSET 2 + +/* USP RX FIFO Level Check Register */ + +#define USP_RX_FIFO_LEVEL_CHECK_MASK 0x1F +#define USP_RX_FIFO_SC_OFFSET 0 +#define USP_RX_FIFO_LC_OFFSET 10 +#define USP_RX_FIFO_HC_OFFSET 20 + +#define RX_FIFO_SC(x) (((x) & USP_RX_FIFO_LEVEL_CHECK_MASK) \ + << USP_RX_FIFO_SC_OFFSET) +#define RX_FIFO_LC(x) (((x) & USP_RX_FIFO_LEVEL_CHECK_MASK) \ + << USP_RX_FIFO_LC_OFFSET) +#define RX_FIFO_HC(x) (((x) & USP_RX_FIFO_LEVEL_CHECK_MASK) \ + << USP_RX_FIFO_HC_OFFSET) + +/* USP RX FIFO Operation Register */ +#define USP_RX_FIFO_RESET 0x00000001 +#define USP_RX_FIFO_START 0x00000002 + +/* USP RX FIFO Status Register */ + +#define USP_RX_FIFO_LEVEL_MASK 0x0000007F +#define USP_RX_FIFO_LEVEL_OFFSET 0 + +#define USP_RX_FIFO_FULL 0x00000080 +#define USP_RX_FIFO_EMPTY 0x00000100 + +/* USP RX FIFO Data Register */ + +#define USP_RX_FIFO_DATA_MASK 0xFFFFFFFF +#define USP_RX_FIFO_DATA_OFFSET 0 + +/* + * When rx thd irq occur, sender just disable tx empty irq, + * Remaining data in tx fifo wil also be sent out. + */ +#define USP_FIFO_SIZE 128 +#define USP_TX_FIFO_THRESHOLD (USP_FIFO_SIZE/2) +#define USP_RX_FIFO_THRESHOLD (USP_FIFO_SIZE/2) + +/* FIFO_WIDTH for the USP_TX_FIFO_CTRL and USP_RX_FIFO_CTRL registers */ +#define USP_FIFO_WIDTH_BYTE 0x00 +#define USP_FIFO_WIDTH_WORD 0x01 +#define USP_FIFO_WIDTH_DWORD 0x02 + +#define USP_ASYNC_DIV2 16 + +#define USP_PLUGOUT_RETRY_CNT 2 + +#define USP_TX_RX_FIFO_WIDTH_DWORD 2 + +#define SIRF_USP_DIV_MCLK 0 + +#define SIRF_USP_I2S_TFS_SYNC 0 +#define SIRF_USP_I2S_RFS_SYNC 1 +#endif |