diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
| -rw-r--r-- | sound/soc/codecs/wm_hubs.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index e93af7edd8f7..891effe220fe 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -85,7 +85,7 @@ static void wait_for_dc_servo(struct snd_soc_component *component, unsigned int else msleep(1); - reg = snd_soc_component_read32(component, WM8993_DC_SERVO_0); + reg = snd_soc_component_read(component, WM8993_DC_SERVO_0); dev_dbg(component->dev, "DC servo: %x\n", reg); } while (reg & op && count < timeout); @@ -109,7 +109,7 @@ static bool wm_hubs_dac_hp_direct(struct snd_soc_component *component) int reg; /* If we're going via the mixer we'll need to do additional checks */ - reg = snd_soc_component_read32(component, WM8993_OUTPUT_MIXER1); + reg = snd_soc_component_read(component, WM8993_OUTPUT_MIXER1); if (!(reg & WM8993_DACL_TO_HPOUT1L)) { if (reg & ~WM8993_DACL_TO_MIXOUTL) { dev_vdbg(component->dev, "Analogue paths connected: %x\n", @@ -122,7 +122,7 @@ static bool wm_hubs_dac_hp_direct(struct snd_soc_component *component) dev_vdbg(component->dev, "HPL connected to DAC\n"); } - reg = snd_soc_component_read32(component, WM8993_OUTPUT_MIXER2); + reg = snd_soc_component_read(component, WM8993_OUTPUT_MIXER2); if (!(reg & WM8993_DACR_TO_HPOUT1R)) { if (reg & ~WM8993_DACR_TO_MIXOUTR) { dev_vdbg(component->dev, "Analogue paths connected: %x\n", @@ -152,10 +152,10 @@ static bool wm_hubs_dcs_cache_get(struct snd_soc_component *component, struct wm_hubs_dcs_cache *cache; unsigned int left, right; - left = snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME); + left = snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME); left &= WM8993_HPOUT1L_VOL_MASK; - right = snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME); + right = snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME); right &= WM8993_HPOUT1R_VOL_MASK; list_for_each_entry(cache, &hubs->dcs_cache, list) { @@ -181,10 +181,10 @@ static void wm_hubs_dcs_cache_set(struct snd_soc_component *component, u16 dcs_c if (!cache) return; - cache->left = snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME); + cache->left = snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME); cache->left &= WM8993_HPOUT1L_VOL_MASK; - cache->right = snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME); + cache->right = snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME); cache->right &= WM8993_HPOUT1R_VOL_MASK; cache->dcs_cfg = dcs_cfg; @@ -216,14 +216,14 @@ static int wm_hubs_read_dc_servo(struct snd_soc_component *component, */ switch (hubs->dcs_readback_mode) { case 0: - *reg_l = snd_soc_component_read32(component, WM8993_DC_SERVO_READBACK_1) + *reg_l = snd_soc_component_read(component, WM8993_DC_SERVO_READBACK_1) & WM8993_DCS_INTEG_CHAN_0_MASK; - *reg_r = snd_soc_component_read32(component, WM8993_DC_SERVO_READBACK_2) + *reg_r = snd_soc_component_read(component, WM8993_DC_SERVO_READBACK_2) & WM8993_DCS_INTEG_CHAN_1_MASK; break; case 2: case 1: - reg = snd_soc_component_read32(component, dcs_reg); + reg = snd_soc_component_read(component, dcs_reg); *reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK) >> WM8993_DCS_DAC_WR_VAL_1_SHIFT; *reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK; @@ -342,7 +342,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, return ret; /* Only need to do this if the outputs are active */ - if (snd_soc_component_read32(component, WM8993_POWER_MANAGEMENT_1) + if (snd_soc_component_read(component, WM8993_POWER_MANAGEMENT_1) & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA)) snd_soc_component_update_bits(component, WM8993_DC_SERVO_0, @@ -538,7 +538,7 @@ static int hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - unsigned int reg = snd_soc_component_read32(component, WM8993_ANALOGUE_HP_0); + unsigned int reg = snd_soc_component_read(component, WM8993_ANALOGUE_HP_0); switch (event) { case SND_SOC_DAPM_POST_PMU: @@ -590,7 +590,7 @@ static int earpiece_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *control, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - u16 reg = snd_soc_component_read32(component, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA; + u16 reg = snd_soc_component_read(component, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA; switch (event) { case SND_SOC_DAPM_PRE_PMU: @@ -680,9 +680,9 @@ void wm_hubs_update_class_w(struct snd_soc_component *component) WM8993_CP_DYN_V | WM8993_CP_DYN_FREQ, enable); snd_soc_component_write(component, WM8993_LEFT_OUTPUT_VOLUME, - snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME)); + snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME)); snd_soc_component_write(component, WM8993_RIGHT_OUTPUT_VOLUME, - snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME)); + snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME)); } EXPORT_SYMBOL_GPL(wm_hubs_update_class_w); |