diff options
Diffstat (limited to 'sound/soc/at32/at32-ssc.c')
| -rw-r--r-- | sound/soc/at32/at32-ssc.c | 849 |
1 files changed, 849 insertions, 0 deletions
diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c new file mode 100644 index 000000000000..4ef6492c902e --- /dev/null +++ b/sound/soc/at32/at32-ssc.c @@ -0,0 +1,849 @@ +/* sound/soc/at32/at32-ssc.c + * ASoC platform driver for AT32 using SSC as DAI + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that this is basically a port of the sound/soc/at91-ssc.c to + * the AVR32 kernel. Thanks to Frank Mandarino for that code. + */ + +/* #define DEBUG */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "at32-pcm.h" +#include "at32-ssc.h" + + + +/*-------------------------------------------------------------------------*\ + * Constants +\*-------------------------------------------------------------------------*/ +#define NUM_SSC_DEVICES 3 + +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + + + +/*-------------------------------------------------------------------------*\ + * Module data +\*-------------------------------------------------------------------------*/ +/* + * SSC PDC registered required by the PCM DMA engine + */ +static struct at32_pdc_regs pdc_tx_reg = { + .xpr = SSC_PDC_TPR, + .xcr = SSC_PDC_TCR, + .xnpr = SSC_PDC_TNPR, + .xncr = SSC_PDC_TNCR, +}; + + + +static struct at32_pdc_regs pdc_rx_reg = { + .xpr = SSC_PDC_RPR, + .xcr = SSC_PDC_RCR, + .xnpr = SSC_PDC_RNPR, + .xncr = SSC_PDC_RNCR, +}; + + + +/* + * SSC and PDC status bits for transmit and receive + */ +static struct at32_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), + .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), +}; + + + +static struct at32_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), + .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), +}; + + + +/* + * DMA parameters for each SSC + */ +static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + { + { + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, + { + { + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, + { + { + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, +}; + + + +static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +}; + + + + +/*-------------------------------------------------------------------------*\ + * ISR +\*-------------------------------------------------------------------------*/ +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt + * handler in the PCM driver. + */ +static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) +{ + struct at32_ssc_info *ssc_p = dev_id; + struct at32_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & + ssc_readl(ssc_p->ssc->regs, IMR)); + + /* + * Loop through substreams attached to this SSC. If a DMA-related + * interrupt occured on that substream, call the DMA interrupt + * handler function, if one has been registered in the dma_param + * structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int at32_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + + + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void at32_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct at32_pcm_dma_params *dma_params; + int dir_mask; + + dma_params = ssc_p->dma_params[substream->stream]; + + if (dma_params != NULL) { + ssc_writel(dma_params->ssc->regs, CR, + dma_params->mask->ssc_disable); + pr_debug("%s disabled SSC_SR=0x%08x\n", + (substream->stream ? "receiver" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[substream->stream] = NULL; + } + + + dir_mask = 1 << substream->stream; + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock */ + pr_debug("at32-ssc: Stopping user %d clock\n", + ssc_p->ssc->user); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + /* clear the SSC dividers */ + ssc_p->cmr_div = 0; + ssc_p->tcmr_period = 0; + ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + + +/* + * Set the SSC system clock rate + */ +static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + /* TODO: What the heck do I do here? */ + return 0; +} + + + +/* + * Record DAI format for use by hw_params() + */ +static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + + + +/* + * Record SSC clock dividers for use in hw_params() + */ +static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case AT32_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case AT32_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case AT32_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + + + +/* + * Configure the SSC + */ +static int at32_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int id = rtd->dai->cpu_dai->id; + struct at32_ssc_info *ssc_p = &ssc_info[id]; + struct at32_pcm_dma_params *dma_params; + int channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + + /* + * Currently, there is only one set of dma_params for each direction. + * If more are added, this code will have to be changed to select + * the proper set + */ + dma_params = &ssc_dma_params[id][substream->stream]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[substream->stream] = dma_params; + + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the PCM driver's hw_params() + * function. It should not be used for other purposes as it + * is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + + /* + * Determine sample size in bits and the PDC increment + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + + case SNDRV_PCM_FORMAT_S16: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + + case SNDRV_PCM_FORMAT_S24: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + + case SNDRV_PCM_FORMAT_S32: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + + default: + pr_warning("at32-ssc: Unsupported PCM format %d", + params_format(params)); + return -EINVAL; + } + pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", + bits, dma_params->pdc_xfer_size, channels); + + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) + if (bits > 16) { + pr_warning("at32-ssc: " + "sample size %d is too large for I2S\n", + bits); + return -EINVAL; + } + + + /* + * Compute the SSC register settings + */ + switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_MASTER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRS clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output on the SSC TK line + */ + pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); + rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | + SSC_BF(RCMR_STTDLY, START_DELAY) | + SSC_BF(RCMR_START, SSC_START_FALLING_RF) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_DIV)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | + SSC_BF(RFMR_FSLEN, bits - 1) | + SSC_BF(RFMR_DATNB, channels - 1) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | + SSC_BF(TCMR_STTDLY, START_DELAY) | + SSC_BF(TCMR_START, SSC_START_FALLING_RF) | + SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | + SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | + SSC_BF(TCMR_CKS, SSC_CKS_DIV)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | + SSC_BF(TFMR_FSLEN, bits - 1) | + SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | + SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clock. + * + * The SSC transmit clock is obtained from the BCLK signal + * on the TK line, and the SSC receive clock is generated from + * the transmit clock. + * + * For single channel data, one sample is transferred on the + * falling edge of the LRC clock. For two channel data, one + * sample is transferred on both edges of the LRC clock. + */ + pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); + start_event = ((channels == 1) ? + SSC_START_FALLING_RF : SSC_START_EDGE_RF); + + rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | + SSC_BF(RCMR_START, start_event) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | + SSC_BF(TCMR_START, start_event) | + SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | + SSC_BF(TCMR_CKO, SSC_CKO_NONE) | + SSC_BF(TCMR_CKS, SSC_CKS_PIN)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | + SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output on the SSC TK line + */ + pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); + rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | + SSC_BF(RCMR_STTDLY, 1) | + SSC_BF(RCMR_START, SSC_START_RISING_RF) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_DIV)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | + SSC_BF(RFMR_DATNB, channels - 1) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | + SSC_BF(TCMR_STTDLY, 1) | + SSC_BF(TCMR_START, SSC_START_RISING_RF) | + SSC_BF(TCMR_CKI, SSC_CKI_RISING) | + SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | + SSC_BF(TCMR_CKS, SSC_CKS_DIV)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | + SSC_BF(TFMR_DATNB, channels - 1) | + SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + pr_warning("at32-ssc: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + + if (!ssc_p->initialized) { + /* enable peripheral clock */ + pr_debug("at32-ssc: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + pr_warning("at32-ssc: request irq failed (%d)\n", ret); + pr_debug("at32-ssc: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* Set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("at32-ssc: SSC initialized\n"); + return 0; +} + + + +static int at32_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct at32_pcm_dma_params *dma_params; + + dma_params = ssc_p->dma_params[substream->stream]; + + ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); + + return 0; +} + + + +#ifdef CONFIG_PM +static int at32_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int at32_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define at32_ssc_suspend NULL +# define at32_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define AT32_SSC_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + + +#define AT32_SSC_FORMATS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ + SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) + + +struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { + { + .name = "at32-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[0], + }, + { + .name = "at32-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[1], + }, + { + .name = "at32-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[2], + }, +}; +EXPORT_SYMBOL_GPL(at32_ssc_dai); + + +MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); +MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); +MODULE_LICENSE("GPL"); |