1 files changed, 23 insertions, 43 deletions

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 607684c47d55..43a45cf00e06 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -27,22 +27,15 @@
 
 #define IEEE80211_PROBE_DELAY (HZ / 33)
 #define IEEE80211_CHANNEL_TIME (HZ / 33)
-#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)
-
-static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss)
-{
-	struct ieee80211_bss *bss = (void *)cbss->priv;
-
-	kfree(bss_mesh_id(bss));
-	kfree(bss_mesh_cfg(bss));
-}
+#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 9)
 
 void ieee80211_rx_bss_put(struct ieee80211_local *local,
 			  struct ieee80211_bss *bss)
 {
 	if (!bss)
 		return;
-	cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv));
+	cfg80211_put_bss(local->hw.wiphy,
+			 container_of((void *)bss, struct cfg80211_bss, priv));
 }
 
 static bool is_uapsd_supported(struct ieee802_11_elems *elems)
@@ -85,10 +78,12 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 	if (!cbss)
 		return NULL;
 
-	cbss->free_priv = ieee80211_rx_bss_free;
 	bss = (void *)cbss->priv;
 
-	bss->device_ts = rx_status->device_timestamp;
+	if (beacon)
+		bss->device_ts_beacon = rx_status->device_timestamp;
+	else
+		bss->device_ts_presp = rx_status->device_timestamp;
 
 	if (elems->parse_error) {
 		if (beacon)
@@ -146,9 +141,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 			bss->valid_data |= IEEE80211_BSS_VALID_WMM;
 	}
 
-	if (!beacon)
-		bss->last_probe_resp = jiffies;
-
 	return bss;
 }
 
@@ -342,6 +334,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
 
 	ieee80211_offchannel_stop_vifs(local);
 
+	/* ensure nullfunc is transmitted before leaving operating channel */
+	drv_flush(local, false);
+
 	ieee80211_configure_filter(local);
 
 	/* We need to set power level at maximum rate for scanning. */
@@ -356,6 +351,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
 static bool ieee80211_can_scan(struct ieee80211_local *local,
 			       struct ieee80211_sub_if_data *sdata)
 {
+	if (local->radar_detect_enabled)
+		return false;
+
 	if (!list_empty(&local->roc_list))
 		return false;
 
@@ -390,6 +388,11 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
 	int i;
 	struct ieee80211_sub_if_data *sdata;
 	enum ieee80211_band band = local->hw.conf.channel->band;
+	u32 tx_flags;
+
+	tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
+	if (local->scan_req->no_cck)
+		tx_flags |= IEEE80211_TX_CTL_NO_CCK_RATE;
 
 	sdata = rcu_dereference_protected(local->scan_sdata,
 					  lockdep_is_held(&local->mtx));
@@ -401,8 +404,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
 			local->scan_req->ssids[i].ssid_len,
 			local->scan_req->ie, local->scan_req->ie_len,
 			local->scan_req->rates[band], false,
-			local->scan_req->no_cck,
-			local->hw.conf.channel, true);
+			tx_flags, local->hw.conf.channel, true);
 
 	/*
 	 * After sending probe requests, wait for probe responses
@@ -546,8 +548,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
 	bool associated = false;
 	bool tx_empty = true;
 	bool bad_latency;
-	bool listen_int_exceeded;
-	unsigned long min_beacon_int = 0;
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_channel *next_chan;
 	enum mac80211_scan_state next_scan_state;
@@ -566,11 +566,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
 			if (sdata->u.mgd.associated) {
 				associated = true;
 
-				if (sdata->vif.bss_conf.beacon_int <
-				    min_beacon_int || min_beacon_int == 0)
-					min_beacon_int =
-						sdata->vif.bss_conf.beacon_int;
-
 				if (!qdisc_all_tx_empty(sdata->dev)) {
 					tx_empty = false;
 					break;
@@ -587,34 +582,19 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
 	 * see if we can scan another channel without interfering
 	 * with the current traffic situation.
 	 *
-	 * Since we don't know if the AP has pending frames for us
-	 * we can only check for our tx queues and use the current
-	 * pm_qos requirements for rx. Hence, if no tx traffic occurs
-	 * at all we will scan as many channels in a row as the pm_qos
-	 * latency allows us to. Additionally we also check for the
-	 * currently negotiated listen interval to prevent losing
-	 * frames unnecessarily.
-	 *
-	 * Otherwise switch back to the operating channel.
+	 * Keep good latency, do not stay off-channel more than 125 ms.
 	 */
 
 	bad_latency = time_after(jiffies +
-			ieee80211_scan_get_channel_time(next_chan),
-			local->leave_oper_channel_time +
-			usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY)));
-
-	listen_int_exceeded = time_after(jiffies +
-			ieee80211_scan_get_channel_time(next_chan),
-			local->leave_oper_channel_time +
-			usecs_to_jiffies(min_beacon_int * 1024) *
-			local->hw.conf.listen_interval);
+				 ieee80211_scan_get_channel_time(next_chan),
+				 local->leave_oper_channel_time + HZ / 8);
 
 	if (associated && !tx_empty) {
 		if (local->scan_req->flags & NL80211_SCAN_FLAG_LOW_PRIORITY)
 			next_scan_state = SCAN_ABORT;
 		else
 			next_scan_state = SCAN_SUSPEND;
-	} else if (associated && (bad_latency || listen_int_exceeded)) {
+	} else if (associated && bad_latency) {
 		next_scan_state = SCAN_SUSPEND;
 	} else {
 		next_scan_state = SCAN_SET_CHANNEL;