diff options
Diffstat (limited to 'mm')
| -rw-r--r-- | mm/Makefile | 4 | ||||
| -rw-r--r-- | mm/allocpercpu.c | 177 | ||||
| -rw-r--r-- | mm/percpu.c | 24 | ||||
| -rw-r--r-- | mm/slab.c | 18 | ||||
| -rw-r--r-- | mm/vmalloc.c | 4 | ||||
| -rw-r--r-- | mm/vmstat.c | 7 |
6 files changed, 36 insertions, 198 deletions
diff --git a/mm/Makefile b/mm/Makefile index ebf849042ed3..82131d0f8d85 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -34,11 +34,7 @@ obj-$(CONFIG_FAILSLAB) += failslab.o obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o obj-$(CONFIG_FS_XIP) += filemap_xip.o obj-$(CONFIG_MIGRATION) += migrate.o -ifndef CONFIG_HAVE_LEGACY_PER_CPU_AREA obj-$(CONFIG_SMP) += percpu.o -else -obj-$(CONFIG_SMP) += allocpercpu.o -endif obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c deleted file mode 100644 index df34ceae0c67..000000000000 --- a/mm/allocpercpu.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * linux/mm/allocpercpu.c - * - * Separated from slab.c August 11, 2006 Christoph Lameter - */ -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/bootmem.h> -#include <asm/sections.h> - -#ifndef cache_line_size -#define cache_line_size() L1_CACHE_BYTES -#endif - -/** - * percpu_depopulate - depopulate per-cpu data for given cpu - * @__pdata: per-cpu data to depopulate - * @cpu: depopulate per-cpu data for this cpu - * - * Depopulating per-cpu data for a cpu going offline would be a typical - * use case. You need to register a cpu hotplug handler for that purpose. - */ -static void percpu_depopulate(void *__pdata, int cpu) -{ - struct percpu_data *pdata = __percpu_disguise(__pdata); - - kfree(pdata->ptrs[cpu]); - pdata->ptrs[cpu] = NULL; -} - -/** - * percpu_depopulate_mask - depopulate per-cpu data for some cpu's - * @__pdata: per-cpu data to depopulate - * @mask: depopulate per-cpu data for cpu's selected through mask bits - */ -static void __percpu_depopulate_mask(void *__pdata, const cpumask_t *mask) -{ - int cpu; - for_each_cpu_mask_nr(cpu, *mask) - percpu_depopulate(__pdata, cpu); -} - -#define percpu_depopulate_mask(__pdata, mask) \ - __percpu_depopulate_mask((__pdata), &(mask)) - -/** - * percpu_populate - populate per-cpu data for given cpu - * @__pdata: per-cpu data to populate further - * @size: size of per-cpu object - * @gfp: may sleep or not etc. - * @cpu: populate per-data for this cpu - * - * Populating per-cpu data for a cpu coming online would be a typical - * use case. You need to register a cpu hotplug handler for that purpose. - * Per-cpu object is populated with zeroed buffer. - */ -static void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu) -{ - struct percpu_data *pdata = __percpu_disguise(__pdata); - int node = cpu_to_node(cpu); - - /* - * We should make sure each CPU gets private memory. - */ - size = roundup(size, cache_line_size()); - - BUG_ON(pdata->ptrs[cpu]); - if (node_online(node)) - pdata->ptrs[cpu] = kmalloc_node(size, gfp|__GFP_ZERO, node); - else - pdata->ptrs[cpu] = kzalloc(size, gfp); - return pdata->ptrs[cpu]; -} - -/** - * percpu_populate_mask - populate per-cpu data for more cpu's - * @__pdata: per-cpu data to populate further - * @size: size of per-cpu object - * @gfp: may sleep or not etc. - * @mask: populate per-cpu data for cpu's selected through mask bits - * - * Per-cpu objects are populated with zeroed buffers. - */ -static int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp, - cpumask_t *mask) -{ - cpumask_t populated; - int cpu; - - cpus_clear(populated); - for_each_cpu_mask_nr(cpu, *mask) - if (unlikely(!percpu_populate(__pdata, size, gfp, cpu))) { - __percpu_depopulate_mask(__pdata, &populated); - return -ENOMEM; - } else - cpu_set(cpu, populated); - return 0; -} - -#define percpu_populate_mask(__pdata, size, gfp, mask) \ - __percpu_populate_mask((__pdata), (size), (gfp), &(mask)) - -/** - * alloc_percpu - initial setup of per-cpu data - * @size: size of per-cpu object - * @align: alignment - * - * Allocate dynamic percpu area. Percpu objects are populated with - * zeroed buffers. - */ -void *__alloc_percpu(size_t size, size_t align) -{ - /* - * We allocate whole cache lines to avoid false sharing - */ - size_t sz = roundup(nr_cpu_ids * sizeof(void *), cache_line_size()); - void *pdata = kzalloc(sz, GFP_KERNEL); - void *__pdata = __percpu_disguise(pdata); - - /* - * Can't easily make larger alignment work with kmalloc. WARN - * on it. Larger alignment should only be used for module - * percpu sections on SMP for which this path isn't used. - */ - WARN_ON_ONCE(align > SMP_CACHE_BYTES); - - if (unlikely(!pdata)) - return NULL; - if (likely(!__percpu_populate_mask(__pdata, size, GFP_KERNEL, - &cpu_possible_map))) - return __pdata; - kfree(pdata); - return NULL; -} -EXPORT_SYMBOL_GPL(__alloc_percpu); - -/** - * free_percpu - final cleanup of per-cpu data - * @__pdata: object to clean up - * - * We simply clean up any per-cpu object left. No need for the client to - * track and specify through a bis mask which per-cpu objects are to free. - */ -void free_percpu(void *__pdata) -{ - if (unlikely(!__pdata)) - return; - __percpu_depopulate_mask(__pdata, cpu_possible_mask); - kfree(__percpu_disguise(__pdata)); -} -EXPORT_SYMBOL_GPL(free_percpu); - -/* - * Generic percpu area setup. - */ -#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA -unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; - -EXPORT_SYMBOL(__per_cpu_offset); - -void __init setup_per_cpu_areas(void) -{ - unsigned long size, i; - char *ptr; - unsigned long nr_possible_cpus = num_possible_cpus(); - - /* Copy section for each CPU (we discard the original) */ - size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE); - ptr = alloc_bootmem_pages(size * nr_possible_cpus); - - for_each_possible_cpu(i) { - __per_cpu_offset[i] = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - ptr += size; - } -} -#endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */ diff --git a/mm/percpu.c b/mm/percpu.c index 5adfc268b408..442010cc91c6 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -46,8 +46,6 @@ * * To use this allocator, arch code should do the followings. * - * - drop CONFIG_HAVE_LEGACY_PER_CPU_AREA - * * - define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() to translate * regular address to percpu pointer and back if they need to be * different from the default @@ -74,6 +72,7 @@ #include <asm/cacheflush.h> #include <asm/sections.h> #include <asm/tlbflush.h> +#include <asm/io.h> #define PCPU_SLOT_BASE_SHIFT 5 /* 1-31 shares the same slot */ #define PCPU_DFL_MAP_ALLOC 16 /* start a map with 16 ents */ @@ -1302,6 +1301,27 @@ void free_percpu(void *ptr) } EXPORT_SYMBOL_GPL(free_percpu); +/** + * per_cpu_ptr_to_phys - convert translated percpu address to physical address + * @addr: the address to be converted to physical address + * + * Given @addr which is dereferenceable address obtained via one of + * percpu access macros, this function translates it into its physical + * address. The caller is responsible for ensuring @addr stays valid + * until this function finishes. + * + * RETURNS: + * The physical address for @addr. + */ +phys_addr_t per_cpu_ptr_to_phys(void *addr) +{ + if ((unsigned long)addr < VMALLOC_START || + (unsigned long)addr >= VMALLOC_END) + return __pa(addr); + else + return page_to_phys(vmalloc_to_page(addr)); +} + static inline size_t pcpu_calc_fc_sizes(size_t static_size, size_t reserved_size, ssize_t *dyn_sizep) diff --git a/mm/slab.c b/mm/slab.c index a6c9166996a9..29b09599af7c 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -697,7 +697,7 @@ static inline void init_lock_keys(void) static DEFINE_MUTEX(cache_chain_mutex); static struct list_head cache_chain; -static DEFINE_PER_CPU(struct delayed_work, reap_work); +static DEFINE_PER_CPU(struct delayed_work, slab_reap_work); static inline struct array_cache *cpu_cache_get(struct kmem_cache *cachep) { @@ -838,7 +838,7 @@ __setup("noaliencache", noaliencache_setup); * objects freed on different nodes from which they were allocated) and the * flushing of remote pcps by calling drain_node_pages. */ -static DEFINE_PER_CPU(unsigned long, reap_node); +static DEFINE_PER_CPU(unsigned long, slab_reap_node); static void init_reap_node(int cpu) { @@ -848,17 +848,17 @@ static void init_reap_node(int cpu) if (node == MAX_NUMNODES) node = first_node(node_online_map); - per_cpu(reap_node, cpu) = node; + per_cpu(slab_reap_node, cpu) = node; } static void next_reap_node(void) { - int node = __get_cpu_var(reap_node); + int node = __get_cpu_var(slab_reap_node); node = next_node(node, node_online_map); if (unlikely(node >= MAX_NUMNODES)) node = first_node(node_online_map); - __get_cpu_var(reap_node) = node; + __get_cpu_var(slab_reap_node) = node; } #else @@ -875,7 +875,7 @@ static void next_reap_node(void) */ static void __cpuinit start_cpu_timer(int cpu) { - struct delayed_work *reap_work = &per_cpu(reap_work, cpu); + struct delayed_work *reap_work = &per_cpu(slab_reap_work, cpu); /* * When this gets called from do_initcalls via cpucache_init(), @@ -1039,7 +1039,7 @@ static void __drain_alien_cache(struct kmem_cache *cachep, */ static void reap_alien(struct kmem_cache *cachep, struct kmem_list3 *l3) { - int node = __get_cpu_var(reap_node); + int node = __get_cpu_var(slab_reap_node); if (l3->alien) { struct array_cache *ac = l3->alien[node]; @@ -1300,9 +1300,9 @@ static int __cpuinit cpuup_callback(struct notifier_block *nfb, * anything expensive but will only modify reap_work * and reschedule the timer. */ - cancel_rearming_delayed_work(&per_cpu(reap_work, cpu)); + cancel_rearming_delayed_work(&per_cpu(slab_reap_work, cpu)); /* Now the cache_reaper is guaranteed to be not running. */ - per_cpu(reap_work, cpu).work.func = NULL; + per_cpu(slab_reap_work, cpu).work.func = NULL; break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 0f551a4a44cd..9b08d790df6f 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -761,7 +761,7 @@ static struct vmap_block *new_vmap_block(gfp_t gfp_mask) spin_lock(&vbq->lock); list_add(&vb->free_list, &vbq->free); spin_unlock(&vbq->lock); - put_cpu_var(vmap_cpu_blocks); + put_cpu_var(vmap_block_queue); return vb; } @@ -826,7 +826,7 @@ again: } spin_unlock(&vb->lock); } - put_cpu_var(vmap_cpu_blocks); + put_cpu_var(vmap_block_queue); rcu_read_unlock(); if (!addr) { diff --git a/mm/vmstat.c b/mm/vmstat.c index c81321f9feec..dad2327e4580 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -883,11 +883,10 @@ static void vmstat_update(struct work_struct *w) static void __cpuinit start_cpu_timer(int cpu) { - struct delayed_work *vmstat_work = &per_cpu(vmstat_work, cpu); + struct delayed_work *work = &per_cpu(vmstat_work, cpu); - INIT_DELAYED_WORK_DEFERRABLE(vmstat_work, vmstat_update); - schedule_delayed_work_on(cpu, vmstat_work, - __round_jiffies_relative(HZ, cpu)); + INIT_DELAYED_WORK_DEFERRABLE(work, vmstat_update); + schedule_delayed_work_on(cpu, work, __round_jiffies_relative(HZ, cpu)); } /* |