diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/Kconfig.debug | 147 | ||||
| -rw-r--r-- | lib/assoc_array.c | 51 | ||||
| -rw-r--r-- | lib/digsig.c | 6 | ||||
| -rw-r--r-- | lib/idr.c | 4 | ||||
| -rw-r--r-- | lib/kobject_uevent.c | 49 | ||||
| -rw-r--r-- | lib/locking-selftest.c | 2 | ||||
| -rw-r--r-- | lib/lz4/lz4_decompress.c | 4 | ||||
| -rw-r--r-- | lib/ratelimit.c | 4 | ||||
| -rw-r--r-- | lib/ts_fsm.c | 2 | ||||
| -rw-r--r-- | lib/ts_kmp.c | 2 |
10 files changed, 148 insertions, 123 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 2689b7c50c52..dfdad67d8f6c 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1092,8 +1092,8 @@ config PROVE_LOCKING select DEBUG_MUTEXES select DEBUG_RT_MUTEXES if RT_MUTEXES select DEBUG_LOCK_ALLOC - select LOCKDEP_CROSSRELEASE - select LOCKDEP_COMPLETIONS + select LOCKDEP_CROSSRELEASE if BROKEN + select LOCKDEP_COMPLETIONS if BROKEN select TRACE_IRQFLAGS default n help @@ -1590,6 +1590,54 @@ config LATENCYTOP source kernel/trace/Kconfig +config PROVIDE_OHCI1394_DMA_INIT + bool "Remote debugging over FireWire early on boot" + depends on PCI && X86 + help + If you want to debug problems which hang or crash the kernel early + on boot and the crashing machine has a FireWire port, you can use + this feature to remotely access the memory of the crashed machine + over FireWire. This employs remote DMA as part of the OHCI1394 + specification which is now the standard for FireWire controllers. + + With remote DMA, you can monitor the printk buffer remotely using + firescope and access all memory below 4GB using fireproxy from gdb. + Even controlling a kernel debugger is possible using remote DMA. + + Usage: + + If ohci1394_dma=early is used as boot parameter, it will initialize + all OHCI1394 controllers which are found in the PCI config space. + + As all changes to the FireWire bus such as enabling and disabling + devices cause a bus reset and thereby disable remote DMA for all + devices, be sure to have the cable plugged and FireWire enabled on + the debugging host before booting the debug target for debugging. + + This code (~1k) is freed after boot. By then, the firewire stack + in charge of the OHCI-1394 controllers should be used instead. + + See Documentation/debugging-via-ohci1394.txt for more information. + +config DMA_API_DEBUG + bool "Enable debugging of DMA-API usage" + depends on HAVE_DMA_API_DEBUG + help + Enable this option to debug the use of the DMA API by device drivers. + With this option you will be able to detect common bugs in device + drivers like double-freeing of DMA mappings or freeing mappings that + were never allocated. + + This also attempts to catch cases where a page owned by DMA is + accessed by the cpu in a way that could cause data corruption. For + example, this enables cow_user_page() to check that the source page is + not undergoing DMA. + + This option causes a performance degradation. Use only if you want to + debug device drivers and dma interactions. + + If unsure, say N. + menu "Runtime Testing" config LKDTM @@ -1749,56 +1797,6 @@ config TEST_PARMAN If unsure, say N. -endmenu # runtime tests - -config PROVIDE_OHCI1394_DMA_INIT - bool "Remote debugging over FireWire early on boot" - depends on PCI && X86 - help - If you want to debug problems which hang or crash the kernel early - on boot and the crashing machine has a FireWire port, you can use - this feature to remotely access the memory of the crashed machine - over FireWire. This employs remote DMA as part of the OHCI1394 - specification which is now the standard for FireWire controllers. - - With remote DMA, you can monitor the printk buffer remotely using - firescope and access all memory below 4GB using fireproxy from gdb. - Even controlling a kernel debugger is possible using remote DMA. - - Usage: - - If ohci1394_dma=early is used as boot parameter, it will initialize - all OHCI1394 controllers which are found in the PCI config space. - - As all changes to the FireWire bus such as enabling and disabling - devices cause a bus reset and thereby disable remote DMA for all - devices, be sure to have the cable plugged and FireWire enabled on - the debugging host before booting the debug target for debugging. - - This code (~1k) is freed after boot. By then, the firewire stack - in charge of the OHCI-1394 controllers should be used instead. - - See Documentation/debugging-via-ohci1394.txt for more information. - -config DMA_API_DEBUG - bool "Enable debugging of DMA-API usage" - depends on HAVE_DMA_API_DEBUG - help - Enable this option to debug the use of the DMA API by device drivers. - With this option you will be able to detect common bugs in device - drivers like double-freeing of DMA mappings or freeing mappings that - were never allocated. - - This also attempts to catch cases where a page owned by DMA is - accessed by the cpu in a way that could cause data corruption. For - example, this enables cow_user_page() to check that the source page is - not undergoing DMA. - - This option causes a performance degradation. Use only if you want to - debug device drivers and dma interactions. - - If unsure, say N. - config TEST_LKM tristate "Test module loading with 'hello world' module" default n @@ -1873,18 +1871,6 @@ config TEST_UDELAY If unsure, say N. -config MEMTEST - bool "Memtest" - depends on HAVE_MEMBLOCK - ---help--- - This option adds a kernel parameter 'memtest', which allows memtest - to be set. - memtest=0, mean disabled; -- default - memtest=1, mean do 1 test pattern; - ... - memtest=17, mean do 17 test patterns. - If you are unsure how to answer this question, answer N. - config TEST_STATIC_KEYS tristate "Test static keys" default n @@ -1894,16 +1880,6 @@ config TEST_STATIC_KEYS If unsure, say N. -config BUG_ON_DATA_CORRUPTION - bool "Trigger a BUG when data corruption is detected" - select DEBUG_LIST - help - Select this option if the kernel should BUG when it encounters - data corruption in kernel memory structures when they get checked - for validity. - - If unsure, say N. - config TEST_KMOD tristate "kmod stress tester" default n @@ -1941,6 +1917,29 @@ config TEST_DEBUG_VIRTUAL If unsure, say N. +endmenu # runtime tests + +config MEMTEST + bool "Memtest" + depends on HAVE_MEMBLOCK + ---help--- + This option adds a kernel parameter 'memtest', which allows memtest + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=17, mean do 17 test patterns. + If you are unsure how to answer this question, answer N. + +config BUG_ON_DATA_CORRUPTION + bool "Trigger a BUG when data corruption is detected" + select DEBUG_LIST + help + Select this option if the kernel should BUG when it encounters + data corruption in kernel memory structures when they get checked + for validity. + + If unsure, say N. source "samples/Kconfig" diff --git a/lib/assoc_array.c b/lib/assoc_array.c index 155c55d8db5f..4e53be8bc590 100644 --- a/lib/assoc_array.c +++ b/lib/assoc_array.c @@ -598,21 +598,31 @@ static bool assoc_array_insert_into_terminal_node(struct assoc_array_edit *edit, if ((edit->segment_cache[ASSOC_ARRAY_FAN_OUT] ^ base_seg) == 0) goto all_leaves_cluster_together; - /* Otherwise we can just insert a new node ahead of the old - * one. + /* Otherwise all the old leaves cluster in the same slot, but + * the new leaf wants to go into a different slot - so we + * create a new node (n0) to hold the new leaf and a pointer to + * a new node (n1) holding all the old leaves. + * + * This can be done by falling through to the node splitting + * path. */ - goto present_leaves_cluster_but_not_new_leaf; + pr_devel("present leaves cluster but not new leaf\n"); } split_node: pr_devel("split node\n"); - /* We need to split the current node; we know that the node doesn't - * simply contain a full set of leaves that cluster together (it - * contains meta pointers and/or non-clustering leaves). + /* We need to split the current node. The node must contain anything + * from a single leaf (in the one leaf case, this leaf will cluster + * with the new leaf) and the rest meta-pointers, to all leaves, some + * of which may cluster. + * + * It won't contain the case in which all the current leaves plus the + * new leaves want to cluster in the same slot. * * We need to expel at least two leaves out of a set consisting of the - * leaves in the node and the new leaf. + * leaves in the node and the new leaf. The current meta pointers can + * just be copied as they shouldn't cluster with any of the leaves. * * We need a new node (n0) to replace the current one and a new node to * take the expelled nodes (n1). @@ -717,33 +727,6 @@ found_slot_for_multiple_occupancy: pr_devel("<--%s() = ok [split node]\n", __func__); return true; -present_leaves_cluster_but_not_new_leaf: - /* All the old leaves cluster in the same slot, but the new leaf wants - * to go into a different slot, so we create a new node to hold the new - * leaf and a pointer to a new node holding all the old leaves. - */ - pr_devel("present leaves cluster but not new leaf\n"); - - new_n0->back_pointer = node->back_pointer; - new_n0->parent_slot = node->parent_slot; - new_n0->nr_leaves_on_branch = node->nr_leaves_on_branch; - new_n1->back_pointer = assoc_array_node_to_ptr(new_n0); - new_n1->parent_slot = edit->segment_cache[0]; - new_n1->nr_leaves_on_branch = node->nr_leaves_on_branch; - edit->adjust_count_on = new_n0; - - for (i = 0; i < ASSOC_ARRAY_FAN_OUT; i++) - new_n1->slots[i] = node->slots[i]; - - new_n0->slots[edit->segment_cache[0]] = assoc_array_node_to_ptr(new_n0); - edit->leaf_p = &new_n0->slots[edit->segment_cache[ASSOC_ARRAY_FAN_OUT]]; - - edit->set[0].ptr = &assoc_array_ptr_to_node(node->back_pointer)->slots[node->parent_slot]; - edit->set[0].to = assoc_array_node_to_ptr(new_n0); - edit->excised_meta[0] = assoc_array_node_to_ptr(node); - pr_devel("<--%s() = ok [insert node before]\n", __func__); - return true; - all_leaves_cluster_together: /* All the leaves, new and old, want to cluster together in this node * in the same slot, so we have to replace this node with a shortcut to diff --git a/lib/digsig.c b/lib/digsig.c index 03d7c63837ae..6ba6fcd92dd1 100644 --- a/lib/digsig.c +++ b/lib/digsig.c @@ -87,6 +87,12 @@ static int digsig_verify_rsa(struct key *key, down_read(&key->sem); ukp = user_key_payload_locked(key); + if (!ukp) { + /* key was revoked before we acquired its semaphore */ + err = -EKEYREVOKED; + goto err1; + } + if (ukp->datalen < sizeof(*pkh)) goto err1; diff --git a/lib/idr.c b/lib/idr.c index f9adf4805fd7..edd9b2be1651 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -146,8 +146,8 @@ EXPORT_SYMBOL(idr_get_next_ext); * idr_alloc() and idr_remove() (as long as the ID being removed is not * the one being replaced!). * - * Returns: 0 on success. %-ENOENT indicates that @id was not found. - * %-EINVAL indicates that @id or @ptr were not valid. + * Returns: the old value on success. %-ENOENT indicates that @id was not + * found. %-EINVAL indicates that @id or @ptr were not valid. */ void *idr_replace(struct idr *idr, void *ptr, int id) { diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index e590523ea476..f237a09a5862 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -294,6 +294,26 @@ static void cleanup_uevent_env(struct subprocess_info *info) } #endif +static void zap_modalias_env(struct kobj_uevent_env *env) +{ + static const char modalias_prefix[] = "MODALIAS="; + int i; + + for (i = 0; i < env->envp_idx;) { + if (strncmp(env->envp[i], modalias_prefix, + sizeof(modalias_prefix) - 1)) { + i++; + continue; + } + + if (i != env->envp_idx - 1) + memmove(&env->envp[i], &env->envp[i + 1], + sizeof(env->envp[i]) * env->envp_idx - 1); + + env->envp_idx--; + } +} + /** * kobject_uevent_env - send an uevent with environmental data * @@ -409,16 +429,29 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, } } - /* - * Mark "add" and "remove" events in the object to ensure proper - * events to userspace during automatic cleanup. If the object did - * send an "add" event, "remove" will automatically generated by - * the core, if not already done by the caller. - */ - if (action == KOBJ_ADD) + switch (action) { + case KOBJ_ADD: + /* + * Mark "add" event so we can make sure we deliver "remove" + * event to userspace during automatic cleanup. If + * the object did send an "add" event, "remove" will + * automatically generated by the core, if not already done + * by the caller. + */ kobj->state_add_uevent_sent = 1; - else if (action == KOBJ_REMOVE) + break; + + case KOBJ_REMOVE: kobj->state_remove_uevent_sent = 1; + break; + + case KOBJ_UNBIND: + zap_modalias_env(env); + break; + + default: + break; + } mutex_lock(&uevent_sock_mutex); /* we will send an event, so request a new sequence number */ diff --git a/lib/locking-selftest.c b/lib/locking-selftest.c index cd0b5c964bd0..2b827b8a1d8c 100644 --- a/lib/locking-selftest.c +++ b/lib/locking-selftest.c @@ -2031,11 +2031,13 @@ void locking_selftest(void) print_testname("mixed read-lock/lock-write ABBA"); pr_cont(" |"); dotest(rlock_ABBA1, FAILURE, LOCKTYPE_RWLOCK); +#ifdef CONFIG_PROVE_LOCKING /* * Lockdep does indeed fail here, but there's nothing we can do about * that now. Don't kill lockdep for it. */ unexpected_testcase_failures--; +#endif pr_cont(" |"); dotest(rwsem_ABBA1, FAILURE, LOCKTYPE_RWSEM); diff --git a/lib/lz4/lz4_decompress.c b/lib/lz4/lz4_decompress.c index bd3574312b82..141734d255e4 100644 --- a/lib/lz4/lz4_decompress.c +++ b/lib/lz4/lz4_decompress.c @@ -85,8 +85,8 @@ static FORCE_INLINE int LZ4_decompress_generic( const BYTE * const lowLimit = lowPrefix - dictSize; const BYTE * const dictEnd = (const BYTE *)dictStart + dictSize; - const unsigned int dec32table[] = { 0, 1, 2, 1, 4, 4, 4, 4 }; - const int dec64table[] = { 0, 0, 0, -1, 0, 1, 2, 3 }; + static const unsigned int dec32table[] = { 0, 1, 2, 1, 4, 4, 4, 4 }; + static const int dec64table[] = { 0, 0, 0, -1, 0, 1, 2, 3 }; const int safeDecode = (endOnInput == endOnInputSize); const int checkOffset = ((safeDecode) && (dictSize < (int)(64 * KB))); diff --git a/lib/ratelimit.c b/lib/ratelimit.c index 08f8043cac61..d01f47135239 100644 --- a/lib/ratelimit.c +++ b/lib/ratelimit.c @@ -48,7 +48,9 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func) if (time_is_before_jiffies(rs->begin + rs->interval)) { if (rs->missed) { if (!(rs->flags & RATELIMIT_MSG_ON_RELEASE)) { - pr_warn("%s: %d callbacks suppressed\n", func, rs->missed); + printk_deferred(KERN_WARNING + "%s: %d callbacks suppressed\n", + func, rs->missed); rs->missed = 0; } } diff --git a/lib/ts_fsm.c b/lib/ts_fsm.c index 5696a35184e4..69557c74ef9f 100644 --- a/lib/ts_fsm.c +++ b/lib/ts_fsm.c @@ -11,7 +11,7 @@ * ========================================================================== * * A finite state machine consists of n states (struct ts_fsm_token) - * representing the pattern as a finite automation. The data is read + * representing the pattern as a finite automaton. The data is read * sequentially on an octet basis. Every state token specifies the number * of recurrences and the type of value accepted which can be either a * specific character or ctype based set of characters. The available diff --git a/lib/ts_kmp.c b/lib/ts_kmp.c index 632f783e65f1..ffbe66cbb0ed 100644 --- a/lib/ts_kmp.c +++ b/lib/ts_kmp.c @@ -27,7 +27,7 @@ * * [1] Cormen, Leiserson, Rivest, Stein * Introdcution to Algorithms, 2nd Edition, MIT Press - * [2] See finite automation theory + * [2] See finite automaton theory */ #include <linux/module.h> |