13 files changed, 1989 insertions, 10 deletions

diff --git a/lib/mpi/Makefile b/lib/mpi/Makefile
index 43b8fce14079..477debd7ed50 100644
--- a/lib/mpi/Makefile
+++ b/lib/mpi/Makefile
@@ -14,9 +14,14 @@ mpi-y = \
 	generic_mpih-sub1.o		\
 	generic_mpih-add1.o		\
 	mpicoder.o			\
+	mpi-add.o			\
 	mpi-bit.o			\
 	mpi-cmp.o			\
 	mpi-sub-ui.o			\
+	mpi-div.o			\
+	mpi-inv.o			\
+	mpi-mod.o			\
+	mpi-mul.o			\
 	mpih-cmp.o			\
 	mpih-div.o			\
 	mpih-mul.o			\
diff --git a/lib/mpi/mpi-add.c b/lib/mpi/mpi-add.c
new file mode 100644
index 000000000000..2cdae54c1bd0
--- /dev/null
+++ b/lib/mpi/mpi-add.c
@@ -0,0 +1,155 @@
+/* mpi-add.c  -  MPI functions
+ * Copyright (C) 1994, 1996, 1998, 2001, 2002,
+ *               2003 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+#include "mpi-internal.h"
+
+/****************
+ * Add the unsigned integer V to the mpi-integer U and store the
+ * result in W. U and V may be the same.
+ */
+void mpi_add_ui(MPI w, MPI u, unsigned long v)
+{
+	mpi_ptr_t wp, up;
+	mpi_size_t usize, wsize;
+	int usign, wsign;
+
+	usize = u->nlimbs;
+	usign = u->sign;
+	wsign = 0;
+
+	/* If not space for W (and possible carry), increase space.  */
+	wsize = usize + 1;
+	if (w->alloced < wsize)
+		mpi_resize(w, wsize);
+
+	/* These must be after realloc (U may be the same as W).  */
+	up = u->d;
+	wp = w->d;
+
+	if (!usize) {  /* simple */
+		wp[0] = v;
+		wsize = v ? 1:0;
+	} else if (!usign) {  /* mpi is not negative */
+		mpi_limb_t cy;
+		cy = mpihelp_add_1(wp, up, usize, v);
+		wp[usize] = cy;
+		wsize = usize + cy;
+	} else {
+		/* The signs are different.  Need exact comparison to determine
+		 * which operand to subtract from which.
+		 */
+		if (usize == 1 && up[0] < v) {
+			wp[0] = v - up[0];
+			wsize = 1;
+		} else {
+			mpihelp_sub_1(wp, up, usize, v);
+			/* Size can decrease with at most one limb. */
+			wsize = usize - (wp[usize-1] == 0);
+			wsign = 1;
+		}
+	}
+
+	w->nlimbs = wsize;
+	w->sign   = wsign;
+}
+
+
+void mpi_add(MPI w, MPI u, MPI v)
+{
+	mpi_ptr_t wp, up, vp;
+	mpi_size_t usize, vsize, wsize;
+	int usign, vsign, wsign;
+
+	if (u->nlimbs < v->nlimbs) { /* Swap U and V. */
+		usize = v->nlimbs;
+		usign = v->sign;
+		vsize = u->nlimbs;
+		vsign = u->sign;
+		wsize = usize + 1;
+		RESIZE_IF_NEEDED(w, wsize);
+		/* These must be after realloc (u or v may be the same as w).  */
+		up = v->d;
+		vp = u->d;
+	} else {
+		usize = u->nlimbs;
+		usign = u->sign;
+		vsize = v->nlimbs;
+		vsign = v->sign;
+		wsize = usize + 1;
+		RESIZE_IF_NEEDED(w, wsize);
+		/* These must be after realloc (u or v may be the same as w).  */
+		up = u->d;
+		vp = v->d;
+	}
+	wp = w->d;
+	wsign = 0;
+
+	if (!vsize) {  /* simple */
+		MPN_COPY(wp, up, usize);
+		wsize = usize;
+		wsign = usign;
+	} else if (usign != vsign) { /* different sign */
+		/* This test is right since USIZE >= VSIZE */
+		if (usize != vsize) {
+			mpihelp_sub(wp, up, usize, vp, vsize);
+			wsize = usize;
+			MPN_NORMALIZE(wp, wsize);
+			wsign = usign;
+		} else if (mpihelp_cmp(up, vp, usize) < 0) {
+			mpihelp_sub_n(wp, vp, up, usize);
+			wsize = usize;
+			MPN_NORMALIZE(wp, wsize);
+			if (!usign)
+				wsign = 1;
+		} else {
+			mpihelp_sub_n(wp, up, vp, usize);
+			wsize = usize;
+			MPN_NORMALIZE(wp, wsize);
+			if (usign)
+				wsign = 1;
+		}
+	} else { /* U and V have same sign. Add them. */
+		mpi_limb_t cy = mpihelp_add(wp, up, usize, vp, vsize);
+		wp[usize] = cy;
+		wsize = usize + cy;
+		if (usign)
+			wsign = 1;
+	}
+
+	w->nlimbs = wsize;
+	w->sign = wsign;
+}
+EXPORT_SYMBOL_GPL(mpi_add);
+
+void mpi_sub(MPI w, MPI u, MPI v)
+{
+	MPI vv = mpi_copy(v);
+	vv->sign = !vv->sign;
+	mpi_add(w, u, vv);
+	mpi_free(vv);
+}
+
+
+void mpi_addm(MPI w, MPI u, MPI v, MPI m)
+{
+	mpi_add(w, u, v);
+	mpi_mod(w, w, m);
+}
+EXPORT_SYMBOL_GPL(mpi_addm);
+
+void mpi_subm(MPI w, MPI u, MPI v, MPI m)
+{
+	mpi_sub(w, u, v);
+	mpi_mod(w, w, m);
+}
+EXPORT_SYMBOL_GPL(mpi_subm);
diff --git a/lib/mpi/mpi-bit.c b/lib/mpi/mpi-bit.c
index 503537e08436..a5119a2bcdd4 100644
--- a/lib/mpi/mpi-bit.c
+++ b/lib/mpi/mpi-bit.c
@@ -32,6 +32,7 @@ void mpi_normalize(MPI a)
 	for (; a->nlimbs && !a->d[a->nlimbs - 1]; a->nlimbs--)
 		;
 }
+EXPORT_SYMBOL_GPL(mpi_normalize);
 
 /****************
  * Return the number of bits in A.
@@ -54,3 +55,253 @@ unsigned mpi_get_nbits(MPI a)
 	return n;
 }
 EXPORT_SYMBOL_GPL(mpi_get_nbits);
+
+/****************
+ * Test whether bit N is set.
+ */
+int mpi_test_bit(MPI a, unsigned int n)
+{
+	unsigned int limbno, bitno;
+	mpi_limb_t limb;
+
+	limbno = n / BITS_PER_MPI_LIMB;
+	bitno  = n % BITS_PER_MPI_LIMB;
+
+	if (limbno >= a->nlimbs)
+		return 0; /* too far left: this is a 0 */
+	limb = a->d[limbno];
+	return (limb & (A_LIMB_1 << bitno)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(mpi_test_bit);
+
+/****************
+ * Set bit N of A.
+ */
+void mpi_set_bit(MPI a, unsigned int n)
+{
+	unsigned int i, limbno, bitno;
+
+	limbno = n / BITS_PER_MPI_LIMB;
+	bitno  = n % BITS_PER_MPI_LIMB;
+
+	if (limbno >= a->nlimbs) {
+		for (i = a->nlimbs; i < a->alloced; i++)
+			a->d[i] = 0;
+		mpi_resize(a, limbno+1);
+		a->nlimbs = limbno+1;
+	}
+	a->d[limbno] |= (A_LIMB_1<<bitno);
+}
+
+/****************
+ * Set bit N of A. and clear all bits above
+ */
+void mpi_set_highbit(MPI a, unsigned int n)
+{
+	unsigned int i, limbno, bitno;
+
+	limbno = n / BITS_PER_MPI_LIMB;
+	bitno  = n % BITS_PER_MPI_LIMB;
+
+	if (limbno >= a->nlimbs) {
+		for (i = a->nlimbs; i < a->alloced; i++)
+			a->d[i] = 0;
+		mpi_resize(a, limbno+1);
+		a->nlimbs = limbno+1;
+	}
+	a->d[limbno] |= (A_LIMB_1<<bitno);
+	for (bitno++; bitno < BITS_PER_MPI_LIMB; bitno++)
+		a->d[limbno] &= ~(A_LIMB_1 << bitno);
+	a->nlimbs = limbno+1;
+}
+EXPORT_SYMBOL_GPL(mpi_set_highbit);
+
+/****************
+ * clear bit N of A and all bits above
+ */
+void mpi_clear_highbit(MPI a, unsigned int n)
+{
+	unsigned int limbno, bitno;
+
+	limbno = n / BITS_PER_MPI_LIMB;
+	bitno  = n % BITS_PER_MPI_LIMB;
+
+	if (limbno >= a->nlimbs)
+		return; /* not allocated, therefore no need to clear bits :-) */
+
+	for ( ; bitno < BITS_PER_MPI_LIMB; bitno++)
+		a->d[limbno] &= ~(A_LIMB_1 << bitno);
+	a->nlimbs = limbno+1;
+}
+
+/****************
+ * Clear bit N of A.
+ */
+void mpi_clear_bit(MPI a, unsigned int n)
+{
+	unsigned int limbno, bitno;
+
+	limbno = n / BITS_PER_MPI_LIMB;
+	bitno  = n % BITS_PER_MPI_LIMB;
+
+	if (limbno >= a->nlimbs)
+		return; /* Don't need to clear this bit, it's far too left.  */
+	a->d[limbno] &= ~(A_LIMB_1 << bitno);
+}
+EXPORT_SYMBOL_GPL(mpi_clear_bit);
+
+
+/****************
+ * Shift A by COUNT limbs to the right
+ * This is used only within the MPI library
+ */
+void mpi_rshift_limbs(MPI a, unsigned int count)
+{
+	mpi_ptr_t ap = a->d;
+	mpi_size_t n = a->nlimbs;
+	unsigned int i;
+
+	if (count >= n) {
+		a->nlimbs = 0;
+		return;
+	}
+
+	for (i = 0; i < n - count; i++)
+		ap[i] = ap[i+count];
+	ap[i] = 0;
+	a->nlimbs -= count;
+}
+
+/*
+ * Shift A by N bits to the right.
+ */
+void mpi_rshift(MPI x, MPI a, unsigned int n)
+{
+	mpi_size_t xsize;
+	unsigned int i;
+	unsigned int nlimbs = (n/BITS_PER_MPI_LIMB);
+	unsigned int nbits = (n%BITS_PER_MPI_LIMB);
+
+	if (x == a) {
+		/* In-place operation.  */
+		if (nlimbs >= x->nlimbs) {
+			x->nlimbs = 0;
+			return;
+		}
+
+		if (nlimbs) {
+			for (i = 0; i < x->nlimbs - nlimbs; i++)
+				x->d[i] = x->d[i+nlimbs];
+			x->d[i] = 0;
+			x->nlimbs -= nlimbs;
+		}
+		if (x->nlimbs && nbits)
+			mpihelp_rshift(x->d, x->d, x->nlimbs, nbits);
+	} else if (nlimbs) {
+		/* Copy and shift by more or equal bits than in a limb. */
+		xsize = a->nlimbs;
+		x->sign = a->sign;
+		RESIZE_IF_NEEDED(x, xsize);
+		x->nlimbs = xsize;
+		for (i = 0; i < a->nlimbs; i++)
+			x->d[i] = a->d[i];
+		x->nlimbs = i;
+
+		if (nlimbs >= x->nlimbs) {
+			x->nlimbs = 0;
+			return;
+		}
+
+		if (nlimbs) {
+			for (i = 0; i < x->nlimbs - nlimbs; i++)
+				x->d[i] = x->d[i+nlimbs];
+			x->d[i] = 0;
+			x->nlimbs -= nlimbs;
+		}
+
+		if (x->nlimbs && nbits)
+			mpihelp_rshift(x->d, x->d, x->nlimbs, nbits);
+	} else {
+		/* Copy and shift by less than bits in a limb.  */
+		xsize = a->nlimbs;
+		x->sign = a->sign;
+		RESIZE_IF_NEEDED(x, xsize);
+		x->nlimbs = xsize;
+
+		if (xsize) {
+			if (nbits)
+				mpihelp_rshift(x->d, a->d, x->nlimbs, nbits);
+			else {
+				/* The rshift helper function is not specified for
+				 * NBITS==0, thus we do a plain copy here.
+				 */
+				for (i = 0; i < x->nlimbs; i++)
+					x->d[i] = a->d[i];
+			}
+		}
+	}
+	MPN_NORMALIZE(x->d, x->nlimbs);
+}
+
+/****************
+ * Shift A by COUNT limbs to the left
+ * This is used only within the MPI library
+ */
+void mpi_lshift_limbs(MPI a, unsigned int count)
+{
+	mpi_ptr_t ap;
+	int n = a->nlimbs;
+	int i;
+
+	if (!count || !n)
+		return;
+
+	RESIZE_IF_NEEDED(a, n+count);
+
+	ap = a->d;
+	for (i = n-1; i >= 0; i--)
+		ap[i+count] = ap[i];
+	for (i = 0; i < count; i++)
+		ap[i] = 0;
+	a->nlimbs += count;
+}
+
+/*
+ * Shift A by N bits to the left.
+ */
+void mpi_lshift(MPI x, MPI a, unsigned int n)
+{
+	unsigned int nlimbs = (n/BITS_PER_MPI_LIMB);
+	unsigned int nbits = (n%BITS_PER_MPI_LIMB);
+
+	if (x == a && !n)
+		return;  /* In-place shift with an amount of zero.  */
+
+	if (x != a) {
+		/* Copy A to X.  */
+		unsigned int alimbs = a->nlimbs;
+		int asign = a->sign;
+		mpi_ptr_t xp, ap;
+
+		RESIZE_IF_NEEDED(x, alimbs+nlimbs+1);
+		xp = x->d;
+		ap = a->d;
+		MPN_COPY(xp, ap, alimbs);
+		x->nlimbs = alimbs;
+		x->flags = a->flags;
+		x->sign = asign;
+	}
+
+	if (nlimbs && !nbits) {
+		/* Shift a full number of limbs.  */
+		mpi_lshift_limbs(x, nlimbs);
+	} else if (n) {
+		/* We use a very dump approach: Shift left by the number of
+		 * limbs plus one and than fix it up by an rshift.
+		 */
+		mpi_lshift_limbs(x, nlimbs+1);
+		mpi_rshift(x, x, BITS_PER_MPI_LIMB - nbits);
+	}
+
+	MPN_NORMALIZE(x->d, x->nlimbs);
+}
diff --git a/lib/mpi/mpi-cmp.c b/lib/mpi/mpi-cmp.c
index d25e9e96c310..c4cfa3ff0581 100644
--- a/lib/mpi/mpi-cmp.c
+++ b/lib/mpi/mpi-cmp.c
@@ -41,28 +41,54 @@ int mpi_cmp_ui(MPI u, unsigned long v)
 }
 EXPORT_SYMBOL_GPL(mpi_cmp_ui);
 
-int mpi_cmp(MPI u, MPI v)
+static int do_mpi_cmp(MPI u, MPI v, int absmode)
 {
-	mpi_size_t usize, vsize;
+	mpi_size_t usize;
+	mpi_size_t vsize;
+	int usign;
+	int vsign;
 	int cmp;
 
 	mpi_normalize(u);
 	mpi_normalize(v);
+
 	usize = u->nlimbs;
 	vsize = v->nlimbs;
-	if (!u->sign && v->sign)
+	usign = absmode ? 0 : u->sign;
+	vsign = absmode ? 0 : v->sign;
+
+	/* Compare sign bits.  */
+
+	if (!usign && vsign)
 		return 1;
-	if (u->sign && !v->sign)
+	if (usign && !vsign)
 		return -1;
-	if (usize != vsize && !u->sign && !v->sign)
+
+	/* U and V are either both positive or both negative.  */
+
+	if (usize != vsize && !usign && !vsign)
 		return usize - vsize;
-	if (usize != vsize && u->sign && v->sign)
-		return vsize - usize;
+	if (usize != vsize && usign && vsign)
+		return vsize + usize;
 	if (!usize)
 		return 0;
 	cmp = mpihelp_cmp(u->d, v->d, usize);
-	if (u->sign)
-		return -cmp;
-	return cmp;
+	if (!cmp)
+		return 0;
+	if ((cmp < 0?1:0) == (usign?1:0))
+		return 1;
+
+	return -1;
+}
+
+int mpi_cmp(MPI u, MPI v)
+{
+	return do_mpi_cmp(u, v, 0);
 }
 EXPORT_SYMBOL_GPL(mpi_cmp);
+
+int mpi_cmpabs(MPI u, MPI v)
+{
+	return do_mpi_cmp(u, v, 1);
+}
+EXPORT_SYMBOL_GPL(mpi_cmpabs);
diff --git a/lib/mpi/mpi-div.c b/lib/mpi/mpi-div.c
new file mode 100644
index 000000000000..21332dab97d4
--- /dev/null
+++ b/lib/mpi/mpi-div.c
@@ -0,0 +1,238 @@
+/* mpi-div.c  -  MPI functions
+ * Copyright (C) 1994, 1996, 1998, 2001, 2002,
+ *               2003 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+#include "mpi-internal.h"
+#include "longlong.h"
+
+void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den);
+void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor);
+
+void mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor)
+{
+	int divisor_sign = divisor->sign;
+	MPI temp_divisor = NULL;
+
+	/* We need the original value of the divisor after the remainder has been
+	 * preliminary calculated.	We have to copy it to temporary space if it's
+	 * the same variable as REM.
+	 */
+	if (rem == divisor) {
+		temp_divisor = mpi_copy(divisor);
+		divisor = temp_divisor;
+	}
+
+	mpi_tdiv_r(rem, dividend, divisor);
+
+	if (((divisor_sign?1:0) ^ (dividend->sign?1:0)) && rem->nlimbs)
+		mpi_add(rem, rem, divisor);
+
+	if (temp_divisor)
+		mpi_free(temp_divisor);
+}
+
+void mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor)
+{
+	MPI tmp = mpi_alloc(mpi_get_nlimbs(quot));
+	mpi_fdiv_qr(quot, tmp, dividend, divisor);
+	mpi_free(tmp);
+}
+
+void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor)
+{
+	int divisor_sign = divisor->sign;
+	MPI temp_divisor = NULL;
+
+	if (quot == divisor || rem == divisor) {
+		temp_divisor = mpi_copy(divisor);
+		divisor = temp_divisor;
+	}
+
+	mpi_tdiv_qr(quot, rem, dividend, divisor);
+
+	if ((divisor_sign ^ dividend->sign) && rem->nlimbs) {
+		mpi_sub_ui(quot, quot, 1);
+		mpi_add(rem, rem, divisor);
+	}
+
+	if (temp_divisor)
+		mpi_free(temp_divisor);
+}
+
+/* If den == quot, den needs temporary storage.
+ * If den == rem, den needs temporary storage.
+ * If num == quot, num needs temporary storage.
+ * If den has temporary storage, it can be normalized while being copied,
+ *   i.e no extra storage should be allocated.
+ */
+
+void mpi_tdiv_r(MPI rem, MPI num, MPI den)
+{
+	mpi_tdiv_qr(NULL, rem, num, den);
+}
+
+void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den)
+{
+	mpi_ptr_t np, dp;
+	mpi_ptr_t qp, rp;
+	mpi_size_t nsize = num->nlimbs;
+	mpi_size_t dsize = den->nlimbs;
+	mpi_size_t qsize, rsize;
+	mpi_size_t sign_remainder = num->sign;
+	mpi_size_t sign_quotient = num->sign ^ den->sign;
+	unsigned int normalization_steps;
+	mpi_limb_t q_limb;
+	mpi_ptr_t marker[5];
+	unsigned int marker_nlimbs[5];
+	int markidx = 0;
+
+	/* Ensure space is enough for quotient and remainder.
+	 * We need space for an extra limb in the remainder, because it's
+	 * up-shifted (normalized) below.
+	 */
+	rsize = nsize + 1;
+	mpi_resize(rem, rsize);
+
+	qsize = rsize - dsize;	  /* qsize cannot be bigger than this.	*/
+	if (qsize <= 0) {
+		if (num != rem) {
+			rem->nlimbs = num->nlimbs;
+			rem->sign = num->sign;
+			MPN_COPY(rem->d, num->d, nsize);
+		}
+		if (quot) {
+			/* This needs to follow the assignment to rem, in case the
+			 * numerator and quotient are the same.
+			 */
+			quot->nlimbs = 0;
+			quot->sign = 0;
+		}
+		return;
+	}
+
+	if (quot)
+		mpi_resize(quot, qsize);
+
+	/* Read pointers here, when reallocation is finished.  */
+	np = num->d;
+	dp = den->d;
+	rp = rem->d;
+
+	/* Optimize division by a single-limb divisor.  */
+	if (dsize == 1) {
+		mpi_limb_t rlimb;
+		if (quot) {
+			qp = quot->d;
+			rlimb = mpihelp_divmod_1(qp, np, nsize, dp[0]);
+			qsize -= qp[qsize - 1] == 0;
+			quot->nlimbs = qsize;
+			quot->sign = sign_quotient;
+		} else
+			rlimb = mpihelp_mod_1(np, nsize, dp[0]);
+		rp[0] = rlimb;
+		rsize = rlimb != 0?1:0;
+		rem->nlimbs = rsize;
+		rem->sign = sign_remainder;
+		return;
+	}
+
+
+	if (quot) {
+		qp = quot->d;
+		/* Make sure QP and NP point to different objects.  Otherwise the
+		 * numerator would be gradually overwritten by the quotient limbs.
+		 */
+		if (qp == np) { /* Copy NP object to temporary space.  */
+			marker_nlimbs[markidx] = nsize;
+			np = marker[markidx++] = mpi_alloc_limb_space(nsize);
+			MPN_COPY(np, qp, nsize);
+		}
+	} else /* Put quotient at top of remainder. */
+		qp = rp + dsize;
+
+	normalization_steps = count_leading_zeros(dp[dsize - 1]);
+
+	/* Normalize the denominator, i.e. make its most significant bit set by
+	 * shifting it NORMALIZATION_STEPS bits to the left.  Also shift the
+	 * numerator the same number of steps (to keep the quotient the same!).
+	 */
+	if (normalization_steps) {
+		mpi_ptr_t tp;
+		mpi_limb_t nlimb;
+
+		/* Shift up the denominator setting the most significant bit of
+		 * the most significant word.  Use temporary storage not to clobber
+		 * the original contents of the denominator.
+		 */
+		marker_nlimbs[markidx] = dsize;
+		tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
+		mpihelp_lshift(tp, dp, dsize, normalization_steps);
+		dp = tp;
+
+		/* Shift up the numerator, possibly introducing a new most
+		 * significant word.  Move the shifted numerator in the remainder
+		 * meanwhile.
+		 */
+		nlimb = mpihelp_lshift(rp, np, nsize, normalization_steps);
+		if (nlimb) {
+			rp[nsize] = nlimb;
+			rsize = nsize + 1;
+		} else
+			rsize = nsize;
+	} else {
+		/* The denominator is already normalized, as required.	Copy it to
+		 * temporary space if it overlaps with the quotient or remainder.
+		 */
+		if (dp == rp || (quot && (dp == qp))) {
+			mpi_ptr_t tp;
+
+			marker_nlimbs[markidx] = dsize;
+			tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
+			MPN_COPY(tp, dp, dsize);
+			dp = tp;
+		}
+
+		/* Move the numerator to the remainder.  */
+		if (rp != np)
+			MPN_COPY(rp, np, nsize);
+
+		rsize = nsize;
+	}
+
+	q_limb = mpihelp_divrem(qp, 0, rp, rsize, dp, dsize);
+
+	if (quot) {
+		qsize = rsize - dsize;
+		if (q_limb) {
+			qp[qsize] = q_limb;
+			qsize += 1;
+		}
+
+		quot->nlimbs = qsize;
+		quot->sign = sign_quotient;
+	}
+
+	rsize = dsize;
+	MPN_NORMALIZE(rp, rsize);
+
+	if (normalization_steps && rsize) {
+		mpihelp_rshift(rp, rp, rsize, normalization_steps);
+		rsize -= rp[rsize - 1] == 0?1:0;
+	}
+
+	rem->nlimbs = rsize;
+	rem->sign	= sign_remainder;
+	while (markidx) {
+		markidx--;
+		mpi_free_limb_space(marker[markidx]);
+	}
+}
diff --git a/lib/mpi/mpi-internal.h b/lib/mpi/mpi-internal.h
index 91df5f0b70f2..d29c4537c3a3 100644
--- a/lib/mpi/mpi-internal.h
+++ b/lib/mpi/mpi-internal.h
@@ -52,6 +52,12 @@
 typedef mpi_limb_t *mpi_ptr_t;	/* pointer to a limb */
 typedef int mpi_size_t;		/* (must be a signed type) */
 
+#define RESIZE_IF_NEEDED(a, b)			\
+	do {					\
+		if ((a)->alloced < (b))		\
+			mpi_resize((a), (b));	\
+	} while (0)
+
 /* Copy N limbs from S to D.  */
 #define MPN_COPY(d, s, n) \
 	do {					\
@@ -60,6 +66,14 @@ typedef int mpi_size_t;		/* (must be a signed type) */
 			(d)[_i] = (s)[_i];	\
 	} while (0)
 
+#define MPN_COPY_INCR(d, s, n)		\
+	do {					\
+		mpi_size_t _i;			\
+		for (_i = 0; _i < (n); _i++)	\
+			(d)[_i] = (s)[_i];	\
+	} while (0)
+
+
 #define MPN_COPY_DECR(d, s, n) \
 	do {					\
 		mpi_size_t _i;			\
@@ -92,6 +106,38 @@ typedef int mpi_size_t;		/* (must be a signed type) */
 			mul_n(prodp, up, vp, size, tspace);	\
 	} while (0);
 
+/* Divide the two-limb number in (NH,,NL) by D, with DI being the largest
+ * limb not larger than (2**(2*BITS_PER_MP_LIMB))/D - (2**BITS_PER_MP_LIMB).
+ * If this would yield overflow, DI should be the largest possible number
+ * (i.e., only ones).  For correct operation, the most significant bit of D
+ * has to be set.  Put the quotient in Q and the remainder in R.
+ */
+#define UDIV_QRNND_PREINV(q, r, nh, nl, d, di)				\
+	do {								\
+		mpi_limb_t _ql;						\
+		mpi_limb_t _q, _r;					\
+		mpi_limb_t _xh, _xl;					\
+		umul_ppmm(_q, _ql, (nh), (di));				\
+		_q += (nh);	/* DI is 2**BITS_PER_MPI_LIMB too small */ \
+		umul_ppmm(_xh, _xl, _q, (d));				\
+		sub_ddmmss(_xh, _r, (nh), (nl), _xh, _xl);		\
+		if (_xh) {						\
+			sub_ddmmss(_xh, _r, _xh, _r, 0, (d));		\
+			_q++;						\
+			if (_xh) {					\
+				sub_ddmmss(_xh, _r, _xh, _r, 0, (d));	\
+				_q++;					\
+			}						\
+		}							\
+		if (_r >= (d)) {					\
+			_r -= (d);					\
+			_q++;						\
+		}							\
+		(r) = _r;						\
+		(q) = _q;						\
+	} while (0)
+
+
 /*-- mpiutil.c --*/
 mpi_ptr_t mpi_alloc_limb_space(unsigned nlimbs);
 void mpi_free_limb_space(mpi_ptr_t a);
@@ -135,6 +181,8 @@ int mpihelp_mul(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t usize,
 void mpih_sqr_n_basecase(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t size);
 void mpih_sqr_n(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t size,
 		mpi_ptr_t tspace);
+void mpihelp_mul_n(mpi_ptr_t prodp,
+		mpi_ptr_t up, mpi_ptr_t vp, mpi_size_t size);
 
 int mpihelp_mul_karatsuba_case(mpi_ptr_t prodp,
 			       mpi_ptr_t up, mpi_size_t usize,
@@ -146,9 +194,14 @@ mpi_limb_t mpihelp_mul_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
 			 mpi_size_t s1_size, mpi_limb_t s2_limb);
 
 /*-- mpih-div.c --*/
+mpi_limb_t mpihelp_mod_1(mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+			 mpi_limb_t divisor_limb);
 mpi_limb_t mpihelp_divrem(mpi_ptr_t qp, mpi_size_t qextra_limbs,
 			  mpi_ptr_t np, mpi_size_t nsize,
 			  mpi_ptr_t dp, mpi_size_t dsize);
+mpi_limb_t mpihelp_divmod_1(mpi_ptr_t quot_ptr,
+			    mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+			    mpi_limb_t divisor_limb);
 
 /*-- generic_mpih-[lr]shift.c --*/
 mpi_limb_t mpihelp_lshift(mpi_ptr_t wp, mpi_ptr_t up, mpi_size_t usize,
diff --git a/lib/mpi/mpi-inv.c b/lib/mpi/mpi-inv.c
new file mode 100644
index 000000000000..61e37d18f793
--- /dev/null
+++ b/lib/mpi/mpi-inv.c
@@ -0,0 +1,143 @@
+/* mpi-inv.c  -  MPI functions
+ *	Copyright (C) 1998, 2001, 2002, 2003 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "mpi-internal.h"
+
+/****************
+ * Calculate the multiplicative inverse X of A mod N
+ * That is: Find the solution x for
+ *		1 = (a*x) mod n
+ */
+int mpi_invm(MPI x, MPI a, MPI n)
+{
+	/* Extended Euclid's algorithm (See TAOCP Vol II, 4.5.2, Alg X)
+	 * modified according to Michael Penk's solution for Exercise 35
+	 * with further enhancement
+	 */
+	MPI u, v, u1, u2 = NULL, u3, v1, v2 = NULL, v3, t1, t2 = NULL, t3;
+	unsigned int k;
+	int sign;
+	int odd;
+
+	if (!mpi_cmp_ui(a, 0))
+		return 0; /* Inverse does not exists.  */
+	if (!mpi_cmp_ui(n, 1))
+		return 0; /* Inverse does not exists.  */
+
+	u = mpi_copy(a);
+	v = mpi_copy(n);
+
+	for (k = 0; !mpi_test_bit(u, 0) && !mpi_test_bit(v, 0); k++) {
+		mpi_rshift(u, u, 1);
+		mpi_rshift(v, v, 1);
+	}
+	odd = mpi_test_bit(v, 0);
+
+	u1 = mpi_alloc_set_ui(1);
+	if (!odd)
+		u2 = mpi_alloc_set_ui(0);
+	u3 = mpi_copy(u);
+	v1 = mpi_copy(v);
+	if (!odd) {
+		v2 = mpi_alloc(mpi_get_nlimbs(u));
+		mpi_sub(v2, u1, u); /* U is used as const 1 */
+	}
+	v3 = mpi_copy(v);
+	if (mpi_test_bit(u, 0)) { /* u is odd */
+		t1 = mpi_alloc_set_ui(0);
+		if (!odd) {
+			t2 = mpi_alloc_set_ui(1);
+			t2->sign = 1;
+		}
+		t3 = mpi_copy(v);
+		t3->sign = !t3->sign;
+		goto Y4;
+	} else {
+		t1 = mpi_alloc_set_ui(1);
+		if (!odd)
+			t2 = mpi_alloc_set_ui(0);
+		t3 = mpi_copy(u);
+	}
+
+	do {
+		do {
+			if (!odd) {
+				if (mpi_test_bit(t1, 0) || mpi_test_bit(t2, 0)) {
+					/* one is odd */
+					mpi_add(t1, t1, v);
+					mpi_sub(t2, t2, u);
+				}
+				mpi_rshift(t1, t1, 1);
+				mpi_rshift(t2, t2, 1);
+				mpi_rshift(t3, t3, 1);
+			} else {
+				if (mpi_test_bit(t1, 0))
+					mpi_add(t1, t1, v);
+				mpi_rshift(t1, t1, 1);
+				mpi_rshift(t3, t3, 1);
+			}
+Y4:
+			;
+		} while (!mpi_test_bit(t3, 0)); /* while t3 is even */
+
+		if (!t3->sign) {
+			mpi_set(u1, t1);
+			if (!odd)
+				mpi_set(u2, t2);
+			mpi_set(u3, t3);
+		} else {
+			mpi_sub(v1, v, t1);
+			sign = u->sign; u->sign = !u->sign;
+			if (!odd)
+				mpi_sub(v2, u, t2);
+			u->sign = sign;
+			sign = t3->sign; t3->sign = !t3->sign;
+			mpi_set(v3, t3);
+			t3->sign = sign;
+		}
+		mpi_sub(t1, u1, v1);
+		if (!odd)
+			mpi_sub(t2, u2, v2);
+		mpi_sub(t3, u3, v3);
+		if (t1->sign) {
+			mpi_add(t1, t1, v);
+			if (!odd)
+				mpi_sub(t2, t2, u);
+		}
+	} while (mpi_cmp_ui(t3, 0)); /* while t3 != 0 */
+	/* mpi_lshift( u3, k ); */
+	mpi_set(x, u1);
+
+	mpi_free(u1);
+	mpi_free(v1);
+	mpi_free(t1);
+	if (!odd) {
+		mpi_free(u2);
+		mpi_free(v2);
+		mpi_free(t2);
+	}
+	mpi_free(u3);
+	mpi_free(v3);
+	mpi_free(t3);
+
+	mpi_free(u);
+	mpi_free(v);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(mpi_invm);
diff --git a/lib/mpi/mpi-mod.c b/lib/mpi/mpi-mod.c
new file mode 100644
index 000000000000..47bc59edd4ff
--- /dev/null
+++ b/lib/mpi/mpi-mod.c
@@ -0,0 +1,155 @@
+/* mpi-mod.c -  Modular reduction
+ * Copyright (C) 1998, 1999, 2001, 2002, 2003,
+ *               2007  Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ */
+
+
+#include "mpi-internal.h"
+#include "longlong.h"
+
+/* Context used with Barrett reduction.  */
+struct barrett_ctx_s {
+	MPI m;   /* The modulus - may not be modified. */
+	int m_copied;   /* If true, M needs to be released.  */
+	int k;
+	MPI y;
+	MPI r1;  /* Helper MPI. */
+	MPI r2;  /* Helper MPI. */
+	MPI r3;  /* Helper MPI allocated on demand. */
+};
+
+
+
+void mpi_mod(MPI rem, MPI dividend, MPI divisor)
+{
+	mpi_fdiv_r(rem, dividend, divisor);
+}
+
+/* This function returns a new context for Barrett based operations on
+ * the modulus M.  This context needs to be released using
+ * _gcry_mpi_barrett_free.  If COPY is true M will be transferred to
+ * the context and the user may change M.  If COPY is false, M may not
+ * be changed until gcry_mpi_barrett_free has been called.
+ */
+mpi_barrett_t mpi_barrett_init(MPI m, int copy)
+{
+	mpi_barrett_t ctx;
+	MPI tmp;
+
+	mpi_normalize(m);
+	ctx = kcalloc(1, sizeof(*ctx), GFP_KERNEL);
+
+	if (copy) {
+		ctx->m = mpi_copy(m);
+		ctx->m_copied = 1;
+	} else
+		ctx->m = m;
+
+	ctx->k = mpi_get_nlimbs(m);
+	tmp = mpi_alloc(ctx->k + 1);
+
+	/* Barrett precalculation: y = floor(b^(2k) / m). */
+	mpi_set_ui(tmp, 1);
+	mpi_lshift_limbs(tmp, 2 * ctx->k);
+	mpi_fdiv_q(tmp, tmp, m);
+
+	ctx->y  = tmp;
+	ctx->r1 = mpi_alloc(2 * ctx->k + 1);
+	ctx->r2 = mpi_alloc(2 * ctx->k + 1);
+
+	return ctx;
+}
+
+void mpi_barrett_free(mpi_barrett_t ctx)
+{
+	if (ctx) {
+		mpi_free(ctx->y);
+		mpi_free(ctx->r1);
+		mpi_free(ctx->r2);
+		if (ctx->r3)
+			mpi_free(ctx->r3);
+		if (ctx->m_copied)
+			mpi_free(ctx->m);
+		kfree(ctx);
+	}
+}
+
+
+/* R = X mod M
+ *
+ * Using Barrett reduction.  Before using this function
+ * _gcry_mpi_barrett_init must have been called to do the
+ * precalculations.  CTX is the context created by this precalculation
+ * and also conveys M.  If the Barret reduction could no be done a
+ * straightforward reduction method is used.
+ *
+ * We assume that these conditions are met:
+ * Input:  x =(x_2k-1 ...x_0)_b
+ *     m =(m_k-1 ....m_0)_b	  with m_k-1 != 0
+ * Output: r = x mod m
+ */
+void mpi_mod_barrett(MPI r, MPI x, mpi_barrett_t ctx)
+{
+	MPI m = ctx->m;
+	int k = ctx->k;
+	MPI y = ctx->y;
+	MPI r1 = ctx->r1;
+	MPI r2 = ctx->r2;
+	int sign;
+
+	mpi_normalize(x);
+	if (mpi_get_nlimbs(x) > 2*k) {
+		mpi_mod(r, x, m);
+		return;
+	}
+
+	sign = x->sign;
+	x->sign = 0;
+
+	/* 1. q1 = floor( x / b^k-1)
+	 *    q2 = q1 * y
+	 *    q3 = floor( q2 / b^k+1 )
+	 * Actually, we don't need qx, we can work direct on r2
+	 */
+	mpi_set(r2, x);
+	mpi_rshift_limbs(r2, k-1);
+	mpi_mul(r2, r2, y);
+	mpi_rshift_limbs(r2, k+1);
+
+	/* 2. r1 = x mod b^k+1
+	 *	r2 = q3 * m mod b^k+1
+	 *	r  = r1 - r2
+	 * 3. if r < 0 then  r = r + b^k+1
+	 */
+	mpi_set(r1, x);
+	if (r1->nlimbs > k+1) /* Quick modulo operation.  */
+		r1->nlimbs = k+1;
+	mpi_mul(r2, r2, m);
+	if (r2->nlimbs > k+1) /* Quick modulo operation. */
+		r2->nlimbs = k+1;
+	mpi_sub(r, r1, r2);
+
+	if (mpi_has_sign(r)) {
+		if (!ctx->r3) {
+			ctx->r3 = mpi_alloc(k + 2);
+			mpi_set_ui(ctx->r3, 1);
+			mpi_lshift_limbs(ctx->r3, k + 1);
+		}
+		mpi_add(r, r, ctx->r3);
+	}
+
+	/* 4. while r >= m do r = r - m */
+	while (mpi_cmp(r, m) >= 0)
+		mpi_sub(r, r, m);
+
+	x->sign = sign;
+}
+
+
+void mpi_mul_barrett(MPI w, MPI u, MPI v, mpi_barrett_t ctx)
+{
+	mpi_mul(w, u, v);
+	mpi_mod_barrett(w, w, ctx);
+}
diff --git a/lib/mpi/mpi-mul.c b/lib/mpi/mpi-mul.c
new file mode 100644
index 000000000000..587e6335cc12
--- /dev/null
+++ b/lib/mpi/mpi-mul.c
@@ -0,0 +1,94 @@
+/* mpi-mul.c  -  MPI functions
+ * Copyright (C) 1994, 1996, 1998, 2001, 2002,
+ *               2003 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+#include "mpi-internal.h"
+
+void mpi_mul(MPI w, MPI u, MPI v)
+{
+	mpi_size_t usize, vsize, wsize;
+	mpi_ptr_t up, vp, wp;
+	mpi_limb_t cy;
+	int usign, vsign, sign_product;
+	int assign_wp = 0;
+	mpi_ptr_t tmp_limb = NULL;
+	unsigned int tmp_limb_nlimbs = 0;
+
+	if (u->nlimbs < v->nlimbs) {
+		/* Swap U and V. */
+		usize = v->nlimbs;
+		usign = v->sign;
+		up    = v->d;
+		vsize = u->nlimbs;
+		vsign = u->sign;
+		vp    = u->d;
+	} else {
+		usize = u->nlimbs;
+		usign = u->sign;
+		up    = u->d;
+		vsize = v->nlimbs;
+		vsign = v->sign;
+		vp    = v->d;
+	}
+	sign_product = usign ^ vsign;
+	wp = w->d;
+
+	/* Ensure W has space enough to store the result.  */
+	wsize = usize + vsize;
+	if (w->alloced < wsize) {
+		if (wp == up || wp == vp) {
+			wp = mpi_alloc_limb_space(wsize);
+			assign_wp = 1;
+		} else {
+			mpi_resize(w, wsize);
+			wp = w->d;
+		}
+	} else { /* Make U and V not overlap with W.	*/
+		if (wp == up) {
+			/* W and U are identical.  Allocate temporary space for U. */
+			tmp_limb_nlimbs = usize;
+			up = tmp_limb = mpi_alloc_limb_space(usize);
+			/* Is V identical too?  Keep it identical with U.  */
+			if (wp == vp)
+				vp = up;
+			/* Copy to the temporary space.  */
+			MPN_COPY(up, wp, usize);
+		} else if (wp == vp) {
+			/* W and V are identical.  Allocate temporary space for V. */
+			tmp_limb_nlimbs = vsize;
+			vp = tmp_limb = mpi_alloc_limb_space(vsize);
+			/* Copy to the temporary space.  */
+			MPN_COPY(vp, wp, vsize);
+		}
+	}
+
+	if (!vsize)
+		wsize = 0;
+	else {
+		mpihelp_mul(wp, up, usize, vp, vsize, &cy);
+		wsize -= cy ? 0:1;
+	}
+
+	if (assign_wp)
+		mpi_assign_limb_space(w, wp, wsize);
+	w->nlimbs = wsize;
+	w->sign = sign_product;
+	if (tmp_limb)
+		mpi_free_limb_space(tmp_limb);
+}
+
+void mpi_mulm(MPI w, MPI u, MPI v, MPI m)
+{
+	mpi_mul(w, u, v);
+	mpi_tdiv_r(w, w, m);
+}
+EXPORT_SYMBOL_GPL(mpi_mulm);
diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c
index eead4b339466..7ea225b2204f 100644
--- a/lib/mpi/mpicoder.c
+++ b/lib/mpi/mpicoder.c
@@ -25,6 +25,7 @@
 #include <linux/string.h>
 #include "mpi-internal.h"
 
+#define MAX_EXTERN_SCAN_BYTES (16*1024*1024)
 #define MAX_EXTERN_MPI_BITS 16384
 
 /**
@@ -109,6 +110,112 @@ MPI mpi_read_from_buffer(const void *xbuffer, unsigned *ret_nread)
 }
 EXPORT_SYMBOL_GPL(mpi_read_from_buffer);
 
+/****************
+ * Fill the mpi VAL from the hex string in STR.
+ */
+int mpi_fromstr(MPI val, const char *str)
+{
+	int sign = 0;
+	int prepend_zero = 0;
+	int i, j, c, c1, c2;
+	unsigned int nbits, nbytes, nlimbs;
+	mpi_limb_t a;
+
+	if (*str == '-') {
+		sign = 1;
+		str++;
+	}
+
+	/* Skip optional hex prefix.  */
+	if (*str == '0' && str[1] == 'x')
+		str += 2;
+
+	nbits = strlen(str);
+	if (nbits > MAX_EXTERN_SCAN_BYTES) {
+		mpi_clear(val);
+		return -EINVAL;
+	}
+	nbits *= 4;
+	if ((nbits % 8))
+		prepend_zero = 1;
+
+	nbytes = (nbits+7) / 8;
+	nlimbs = (nbytes+BYTES_PER_MPI_LIMB-1) / BYTES_PER_MPI_LIMB;
+
+	if (val->alloced < nlimbs)
+		mpi_resize(val, nlimbs);
+
+	i = BYTES_PER_MPI_LIMB - (nbytes % BYTES_PER_MPI_LIMB);
+	i %= BYTES_PER_MPI_LIMB;
+	j = val->nlimbs = nlimbs;
+	val->sign = sign;
+	for (; j > 0; j--) {
+		a = 0;
+		for (; i < BYTES_PER_MPI_LIMB; i++) {
+			if (prepend_zero) {
+				c1 = '0';
+				prepend_zero = 0;
+			} else
+				c1 = *str++;
+
+			if (!c1) {
+				mpi_clear(val);
+				return -EINVAL;
+			}
+			c2 = *str++;
+			if (!c2) {
+				mpi_clear(val);
+				return -EINVAL;
+			}
+			if (c1 >= '0' && c1 <= '9')
+				c = c1 - '0';
+			else if (c1 >= 'a' && c1 <= 'f')
+				c = c1 - 'a' + 10;
+			else if (c1 >= 'A' && c1 <= 'F')
+				c = c1 - 'A' + 10;
+			else {
+				mpi_clear(val);
+				return -EINVAL;
+			}
+			c <<= 4;
+			if (c2 >= '0' && c2 <= '9')
+				c |= c2 - '0';
+			else if (c2 >= 'a' && c2 <= 'f')
+				c |= c2 - 'a' + 10;
+			else if (c2 >= 'A' && c2 <= 'F')
+				c |= c2 - 'A' + 10;
+			else {
+				mpi_clear(val);
+				return -EINVAL;
+			}
+			a <<= 8;
+			a |= c;
+		}
+		i = 0;
+		val->d[j-1] = a;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mpi_fromstr);
+
+MPI mpi_scanval(const char *string)
+{
+	MPI a;
+
+	a = mpi_alloc(0);
+	if (!a)
+		return NULL;
+
+	if (mpi_fromstr(a, string)) {
+		mpi_free(a);
+		return NULL;
+	}
+	mpi_normalize(a);
+	return a;
+}
+EXPORT_SYMBOL_GPL(mpi_scanval);
+
 static int count_lzeros(MPI a)
 {
 	mpi_limb_t alimb;
@@ -413,3 +520,232 @@ MPI mpi_read_raw_from_sgl(struct scatterlist *sgl, unsigned int nbytes)
 	return val;
 }
 EXPORT_SYMBOL_GPL(mpi_read_raw_from_sgl);
+
+/* Perform a two's complement operation on buffer P of size N bytes.  */
+static void twocompl(unsigned char *p, unsigned int n)
+{
+	int i;
+
+	for (i = n-1; i >= 0 && !p[i]; i--)
+		;
+	if (i >= 0) {
+		if ((p[i] & 0x01))
+			p[i] = (((p[i] ^ 0xfe) | 0x01) & 0xff);
+		else if ((p[i] & 0x02))
+			p[i] = (((p[i] ^ 0xfc) | 0x02) & 0xfe);
+		else if ((p[i] & 0x04))
+			p[i] = (((p[i] ^ 0xf8) | 0x04) & 0xfc);
+		else if ((p[i] & 0x08))
+			p[i] = (((p[i] ^ 0xf0) | 0x08) & 0xf8);
+		else if ((p[i] & 0x10))
+			p[i] = (((p[i] ^ 0xe0) | 0x10) & 0xf0);
+		else if ((p[i] & 0x20))
+			p[i] = (((p[i] ^ 0xc0) | 0x20) & 0xe0);
+		else if ((p[i] & 0x40))
+			p[i] = (((p[i] ^ 0x80) | 0x40) & 0xc0);
+		else
+			p[i] = 0x80;
+
+		for (i--; i >= 0; i--)
+			p[i] ^= 0xff;
+	}
+}
+
+int mpi_print(enum gcry_mpi_format format, unsigned char *buffer,
+			size_t buflen, size_t *nwritten, MPI a)
+{
+	unsigned int nbits = mpi_get_nbits(a);
+	size_t len;
+	size_t dummy_nwritten;
+	int negative;
+
+	if (!nwritten)
+		nwritten = &dummy_nwritten;
+
+	/* Libgcrypt does no always care to set clear the sign if the value
+	 * is 0.  For printing this is a bit of a surprise, in particular
+	 * because if some of the formats don't support negative numbers but
+	 * should be able to print a zero.  Thus we need this extra test
+	 * for a negative number.
+	 */
+	if (a->sign && mpi_cmp_ui(a, 0))
+		negative = 1;
+	else
+		negative = 0;
+
+	len = buflen;
+	*nwritten = 0;
+	if (format == GCRYMPI_FMT_STD) {
+		unsigned char *tmp;
+		int extra = 0;
+		unsigned int n;
+
+		tmp = mpi_get_buffer(a, &n, NULL);
+		if (!tmp)
+			return -EINVAL;
+
+		if (negative) {
+			twocompl(tmp, n);
+			if (!(*tmp & 0x80)) {
+				/* Need to extend the sign.  */
+				n++;
+				extra = 2;
+			}
+		} else if (n && (*tmp & 0x80)) {
+			/* Positive but the high bit of the returned buffer is set.
+			 * Thus we need to print an extra leading 0x00 so that the
+			 * output is interpreted as a positive number.
+			 */
+			n++;
+			extra = 1;
+		}
+
+		if (buffer && n > len) {
+			/* The provided buffer is too short. */
+			kfree(tmp);
+			return -E2BIG;
+		}
+		if (buffer) {
+			unsigned char *s = buffer;
+
+			if (extra == 1)
+				*s++ = 0;
+			else if (extra)
+				*s++ = 0xff;
+			memcpy(s, tmp, n-!!extra);
+		}
+		kfree(tmp);
+		*nwritten = n;
+		return 0;
+	} else if (format == GCRYMPI_FMT_USG) {
+		unsigned int n = (nbits + 7)/8;
+
+		/* Note:  We ignore the sign for this format.  */
+		/* FIXME: for performance reasons we should put this into
+		 * mpi_aprint because we can then use the buffer directly.
+		 */
+
+		if (buffer && n > len)
+			return -E2BIG;
+		if (buffer) {
+			unsigned char *tmp;
+
+			tmp = mpi_get_buffer(a, &n, NULL);
+			if (!tmp)
+				return -EINVAL;
+			memcpy(buffer, tmp, n);
+			kfree(tmp);
+		}
+		*nwritten = n;
+		return 0;
+	} else if (format == GCRYMPI_FMT_PGP) {
+		unsigned int n = (nbits + 7)/8;
+
+		/* The PGP format can only handle unsigned integers.  */
+		if (negative)
+			return -EINVAL;
+
+		if (buffer && n+2 > len)
+			return -E2BIG;
+
+		if (buffer) {
+			unsigned char *tmp;
+			unsigned char *s = buffer;
+
+			s[0] = nbits >> 8;
+			s[1] = nbits;
+
+			tmp = mpi_get_buffer(a, &n, NULL);
+			if (!tmp)
+				return -EINVAL;
+			memcpy(s+2, tmp, n);
+			kfree(tmp);
+		}
+		*nwritten = n+2;
+		return 0;
+	} else if (format == GCRYMPI_FMT_SSH) {
+		unsigned char *tmp;
+		int extra = 0;
+		unsigned int n;
+
+		tmp = mpi_get_buffer(a, &n, NULL);
+		if (!tmp)
+			return -EINVAL;
+
+		if (negative) {
+			twocompl(tmp, n);
+			if (!(*tmp & 0x80)) {
+				/* Need to extend the sign.  */
+				n++;
+				extra = 2;
+			}
+		} else if (n && (*tmp & 0x80)) {
+			n++;
+			extra = 1;
+		}
+
+		if (buffer && n+4 > len) {
+			kfree(tmp);
+			return -E2BIG;
+		}
+
+		if (buffer) {
+			unsigned char *s = buffer;
+
+			*s++ = n >> 24;
+			*s++ = n >> 16;
+			*s++ = n >> 8;
+			*s++ = n;
+			if (extra == 1)
+				*s++ = 0;
+			else if (extra)
+				*s++ = 0xff;
+			memcpy(s, tmp, n-!!extra);
+		}
+		kfree(tmp);
+		*nwritten = 4+n;
+		return 0;
+	} else if (format == GCRYMPI_FMT_HEX) {
+		unsigned char *tmp;
+		int i;
+		int extra = 0;
+		unsigned int n = 0;
+
+		tmp = mpi_get_buffer(a, &n, NULL);
+		if (!tmp)
+			return -EINVAL;
+		if (!n || (*tmp & 0x80))
+			extra = 2;
+
+		if (buffer && 2*n + extra + negative + 1 > len) {
+			kfree(tmp);
+			return -E2BIG;
+		}
+		if (buffer) {
+			unsigned char *s = buffer;
+
+			if (negative)
+				*s++ = '-';
+			if (extra) {
+				*s++ = '0';
+				*s++ = '0';
+			}
+
+			for (i = 0; i < n; i++) {
+				unsigned int c = tmp[i];
+
+				*s++ = (c >> 4) < 10 ? '0'+(c>>4) : 'A'+(c>>4)-10;
+				c &= 15;
+				*s++ = c < 10 ? '0'+c : 'A'+c-10;
+			}
+			*s++ = 0;
+			*nwritten = s - buffer;
+		} else {
+			*nwritten = 2*n + extra + negative + 1;
+		}
+		kfree(tmp);
+		return 0;
+	} else
+		return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mpi_print);
diff --git a/lib/mpi/mpih-div.c b/lib/mpi/mpih-div.c
index 913a519eb005..182a656a1ba0 100644
--- a/lib/mpi/mpih-div.c
+++ b/lib/mpi/mpih-div.c
@@ -24,6 +24,150 @@
 #define UDIV_TIME UMUL_TIME
 #endif
 
+
+mpi_limb_t
+mpihelp_mod_1(mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+			mpi_limb_t divisor_limb)
+{
+	mpi_size_t i;
+	mpi_limb_t n1, n0, r;
+	mpi_limb_t dummy;
+
+	/* Botch: Should this be handled at all?  Rely on callers?	*/
+	if (!dividend_size)
+		return 0;
+
+	/* If multiplication is much faster than division, and the
+	 * dividend is large, pre-invert the divisor, and use
+	 * only multiplications in the inner loop.
+	 *
+	 * This test should be read:
+	 *	 Does it ever help to use udiv_qrnnd_preinv?
+	 *	   && Does what we save compensate for the inversion overhead?
+	 */
+	if (UDIV_TIME > (2 * UMUL_TIME + 6)
+			&& (UDIV_TIME - (2 * UMUL_TIME + 6)) * dividend_size > UDIV_TIME) {
+		int normalization_steps;
+
+		normalization_steps = count_leading_zeros(divisor_limb);
+		if (normalization_steps) {
+			mpi_limb_t divisor_limb_inverted;
+
+			divisor_limb <<= normalization_steps;
+
+			/* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB.  The
+			 * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
+			 * most significant bit (with weight 2**N) implicit.
+			 *
+			 * Special case for DIVISOR_LIMB == 100...000.
+			 */
+			if (!(divisor_limb << 1))
+				divisor_limb_inverted = ~(mpi_limb_t)0;
+			else
+				udiv_qrnnd(divisor_limb_inverted, dummy,
+						-divisor_limb, 0, divisor_limb);
+
+			n1 = dividend_ptr[dividend_size - 1];
+			r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
+
+			/* Possible optimization:
+			 * if (r == 0
+			 * && divisor_limb > ((n1 << normalization_steps)
+			 *		       | (dividend_ptr[dividend_size - 2] >> ...)))
+			 * ...one division less...
+			 */
+			for (i = dividend_size - 2; i >= 0; i--) {
+				n0 = dividend_ptr[i];
+				UDIV_QRNND_PREINV(dummy, r, r,
+						((n1 << normalization_steps)
+						 | (n0 >> (BITS_PER_MPI_LIMB - normalization_steps))),
+						divisor_limb, divisor_limb_inverted);
+				n1 = n0;
+			}
+			UDIV_QRNND_PREINV(dummy, r, r,
+					n1 << normalization_steps,
+					divisor_limb, divisor_limb_inverted);
+			return r >> normalization_steps;
+		} else {
+			mpi_limb_t divisor_limb_inverted;
+
+			/* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB.  The
+			 * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
+			 * most significant bit (with weight 2**N) implicit.
+			 *
+			 * Special case for DIVISOR_LIMB == 100...000.
+			 */
+			if (!(divisor_limb << 1))
+				divisor_limb_inverted = ~(mpi_limb_t)0;
+			else
+				udiv_qrnnd(divisor_limb_inverted, dummy,
+						-divisor_limb, 0, divisor_limb);
+
+			i = dividend_size - 1;
+			r = dividend_ptr[i];
+
+			if (r >= divisor_limb)
+				r = 0;
+			else
+				i--;
+
+			for ( ; i >= 0; i--) {
+				n0 = dividend_ptr[i];
+				UDIV_QRNND_PREINV(dummy, r, r,
+						n0, divisor_limb, divisor_limb_inverted);
+			}
+			return r;
+		}
+	} else {
+		if (UDIV_NEEDS_NORMALIZATION) {
+			int normalization_steps;
+
+			normalization_steps = count_leading_zeros(divisor_limb);
+			if (normalization_steps) {
+				divisor_limb <<= normalization_steps;
+
+				n1 = dividend_ptr[dividend_size - 1];
+				r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
+
+				/* Possible optimization:
+				 * if (r == 0
+				 * && divisor_limb > ((n1 << normalization_steps)
+				 *		   | (dividend_ptr[dividend_size - 2] >> ...)))
+				 * ...one division less...
+				 */
+				for (i = dividend_size - 2; i >= 0; i--) {
+					n0 = dividend_ptr[i];
+					udiv_qrnnd(dummy, r, r,
+						((n1 << normalization_steps)
+						 | (n0 >> (BITS_PER_MPI_LIMB - normalization_steps))),
+						divisor_limb);
+					n1 = n0;
+				}
+				udiv_qrnnd(dummy, r, r,
+						n1 << normalization_steps,
+						divisor_limb);
+				return r >> normalization_steps;
+			}
+		}
+		/* No normalization needed, either because udiv_qrnnd doesn't require
+		 * it, or because DIVISOR_LIMB is already normalized.
+		 */
+		i = dividend_size - 1;
+		r = dividend_ptr[i];
+
+		if (r >= divisor_limb)
+			r = 0;
+		else
+			i--;
+
+		for (; i >= 0; i--) {
+			n0 = dividend_ptr[i];
+			udiv_qrnnd(dummy, r, r, n0, divisor_limb);
+		}
+		return r;
+	}
+}
+
 /* Divide num (NP/NSIZE) by den (DP/DSIZE) and write
  * the NSIZE-DSIZE least significant quotient limbs at QP
  * and the DSIZE long remainder at NP.	If QEXTRA_LIMBS is
@@ -221,3 +365,153 @@ q_test:
 
 	return most_significant_q_limb;
 }
+
+/****************
+ * Divide (DIVIDEND_PTR,,DIVIDEND_SIZE) by DIVISOR_LIMB.
+ * Write DIVIDEND_SIZE limbs of quotient at QUOT_PTR.
+ * Return the single-limb remainder.
+ * There are no constraints on the value of the divisor.
+ *
+ * QUOT_PTR and DIVIDEND_PTR might point to the same limb.
+ */
+
+mpi_limb_t
+mpihelp_divmod_1(mpi_ptr_t quot_ptr,
+		mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+		mpi_limb_t divisor_limb)
+{
+	mpi_size_t i;
+	mpi_limb_t n1, n0, r;
+	mpi_limb_t dummy;
+
+	if (!dividend_size)
+		return 0;
+
+	/* If multiplication is much faster than division, and the
+	 * dividend is large, pre-invert the divisor, and use
+	 * only multiplications in the inner loop.
+	 *
+	 * This test should be read:
+	 * Does it ever help to use udiv_qrnnd_preinv?
+	 * && Does what we save compensate for the inversion overhead?
+	 */
+	if (UDIV_TIME > (2 * UMUL_TIME + 6)
+			&& (UDIV_TIME - (2 * UMUL_TIME + 6)) * dividend_size > UDIV_TIME) {
+		int normalization_steps;
+
+		normalization_steps = count_leading_zeros(divisor_limb);
+		if (normalization_steps) {
+			mpi_limb_t divisor_limb_inverted;
+
+			divisor_limb <<= normalization_steps;
+
+			/* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB.  The
+			 * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
+			 * most significant bit (with weight 2**N) implicit.
+			 */
+			/* Special case for DIVISOR_LIMB == 100...000.  */
+			if (!(divisor_limb << 1))
+				divisor_limb_inverted = ~(mpi_limb_t)0;
+			else
+				udiv_qrnnd(divisor_limb_inverted, dummy,
+						-divisor_limb, 0, divisor_limb);
+
+			n1 = dividend_ptr[dividend_size - 1];
+			r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
+
+			/* Possible optimization:
+			 * if (r == 0
+			 * && divisor_limb > ((n1 << normalization_steps)
+			 *		       | (dividend_ptr[dividend_size - 2] >> ...)))
+			 * ...one division less...
+			 */
+			for (i = dividend_size - 2; i >= 0; i--) {
+				n0 = dividend_ptr[i];
+				UDIV_QRNND_PREINV(quot_ptr[i + 1], r, r,
+						((n1 << normalization_steps)
+						 | (n0 >> (BITS_PER_MPI_LIMB - normalization_steps))),
+						divisor_limb, divisor_limb_inverted);
+				n1 = n0;
+			}
+			UDIV_QRNND_PREINV(quot_ptr[0], r, r,
+					n1 << normalization_steps,
+					divisor_limb, divisor_limb_inverted);
+			return r >> normalization_steps;
+		} else {
+			mpi_limb_t divisor_limb_inverted;
+
+			/* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB.  The
+			 * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
+			 * most significant bit (with weight 2**N) implicit.
+			 */
+			/* Special case for DIVISOR_LIMB == 100...000.  */
+			if (!(divisor_limb << 1))
+				divisor_limb_inverted = ~(mpi_limb_t) 0;
+			else
+				udiv_qrnnd(divisor_limb_inverted, dummy,
+						-divisor_limb, 0, divisor_limb);
+
+			i = dividend_size - 1;
+			r = dividend_ptr[i];
+
+			if (r >= divisor_limb)
+				r = 0;
+			else
+				quot_ptr[i--] = 0;
+
+			for ( ; i >= 0; i--) {
+				n0 = dividend_ptr[i];
+				UDIV_QRNND_PREINV(quot_ptr[i], r, r,
+						n0, divisor_limb, divisor_limb_inverted);
+			}
+			return r;
+		}
+	} else {
+		if (UDIV_NEEDS_NORMALIZATION) {
+			int normalization_steps;
+
+			normalization_steps = count_leading_zeros(divisor_limb);
+			if (normalization_steps) {
+				divisor_limb <<= normalization_steps;
+
+				n1 = dividend_ptr[dividend_size - 1];
+				r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
+
+				/* Possible optimization:
+				 * if (r == 0
+				 * && divisor_limb > ((n1 << normalization_steps)
+				 *		   | (dividend_ptr[dividend_size - 2] >> ...)))
+				 * ...one division less...
+				 */
+				for (i = dividend_size - 2; i >= 0; i--) {
+					n0 = dividend_ptr[i];
+					udiv_qrnnd(quot_ptr[i + 1], r, r,
+						((n1 << normalization_steps)
+						 | (n0 >> (BITS_PER_MPI_LIMB - normalization_steps))),
+						divisor_limb);
+					n1 = n0;
+				}
+				udiv_qrnnd(quot_ptr[0], r, r,
+						n1 << normalization_steps,
+						divisor_limb);
+				return r >> normalization_steps;
+			}
+		}
+		/* No normalization needed, either because udiv_qrnnd doesn't require
+		 * it, or because DIVISOR_LIMB is already normalized.
+		 */
+		i = dividend_size - 1;
+		r = dividend_ptr[i];
+
+		if (r >= divisor_limb)
+			r = 0;
+		else
+			quot_ptr[i--] = 0;
+
+		for (; i >= 0; i--) {
+			n0 = dividend_ptr[i];
+			udiv_qrnnd(quot_ptr[i], r, r, n0, divisor_limb);
+		}
+		return r;
+	}
+}
diff --git a/lib/mpi/mpih-mul.c b/lib/mpi/mpih-mul.c
index a93647564054..e5f1c84e3c48 100644
--- a/lib/mpi/mpih-mul.c
+++ b/lib/mpi/mpih-mul.c
@@ -317,6 +317,31 @@ mpih_sqr_n(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t size, mpi_ptr_t tspace)
 	}
 }
 
+
+void mpihelp_mul_n(mpi_ptr_t prodp,
+		mpi_ptr_t up, mpi_ptr_t vp, mpi_size_t size)
+{
+	if (up == vp) {
+		if (size < KARATSUBA_THRESHOLD)
+			mpih_sqr_n_basecase(prodp, up, size);
+		else {
+			mpi_ptr_t tspace;
+			tspace = mpi_alloc_limb_space(2 * size);
+			mpih_sqr_n(prodp, up, size, tspace);
+			mpi_free_limb_space(tspace);
+		}
+	} else {
+		if (size < KARATSUBA_THRESHOLD)
+			mul_n_basecase(prodp, up, vp, size);
+		else {
+			mpi_ptr_t tspace;
+			tspace = mpi_alloc_limb_space(2 * size);
+			mul_n(prodp, up, vp, size, tspace);
+			mpi_free_limb_space(tspace);
+		}
+	}
+}
+
 int
 mpihelp_mul_karatsuba_case(mpi_ptr_t prodp,
 			   mpi_ptr_t up, mpi_size_t usize,
diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c
index 4cd2b335cb7f..3c63710c20c6 100644
--- a/lib/mpi/mpiutil.c
+++ b/lib/mpi/mpiutil.c
@@ -20,6 +20,63 @@
 
 #include "mpi-internal.h"
 
+/* Constants allocated right away at startup.  */
+static MPI constants[MPI_NUMBER_OF_CONSTANTS];
+
+/* Initialize the MPI subsystem.  This is called early and allows to
+ * do some initialization without taking care of threading issues.
+ */
+static int __init mpi_init(void)
+{
+	int idx;
+	unsigned long value;
+
+	for (idx = 0; idx < MPI_NUMBER_OF_CONSTANTS; idx++) {
+		switch (idx) {
+		case MPI_C_ZERO:
+			value = 0;
+			break;
+		case MPI_C_ONE:
+			value = 1;
+			break;
+		case MPI_C_TWO:
+			value = 2;
+			break;
+		case MPI_C_THREE:
+			value = 3;
+			break;
+		case MPI_C_FOUR:
+			value = 4;
+			break;
+		case MPI_C_EIGHT:
+			value = 8;
+			break;
+		default:
+			pr_err("MPI: invalid mpi_const selector %d\n", idx);
+			return -EFAULT;
+		}
+		constants[idx] = mpi_alloc_set_ui(value);
+		constants[idx]->flags = (16|32);
+	}
+
+	return 0;
+}
+postcore_initcall(mpi_init);
+
+/* Return a constant MPI descripbed by NO which is one of the
+ * MPI_C_xxx macros.  There is no need to copy this returned value; it
+ * may be used directly.
+ */
+MPI mpi_const(enum gcry_mpi_constants no)
+{
+	if ((int)no < 0 || no > MPI_NUMBER_OF_CONSTANTS)
+		pr_err("MPI: invalid mpi_const selector %d\n", no);
+	if (!constants[no])
+		pr_err("MPI: MPI subsystem not initialized\n");
+	return constants[no];
+}
+EXPORT_SYMBOL_GPL(mpi_const);
+
 /****************
  * Note:  It was a bad idea to use the number of limbs to allocate
  *	  because on a alpha the limbs are large but we normally need
@@ -106,6 +163,15 @@ int mpi_resize(MPI a, unsigned nlimbs)
 	return 0;
 }
 
+void mpi_clear(MPI a)
+{
+	if (!a)
+		return;
+	a->nlimbs = 0;
+	a->flags = 0;
+}
+EXPORT_SYMBOL_GPL(mpi_clear);
+
 void mpi_free(MPI a)
 {
 	if (!a)
@@ -122,5 +188,143 @@ void mpi_free(MPI a)
 }
 EXPORT_SYMBOL_GPL(mpi_free);
 
+/****************
+ * Note: This copy function should not interpret the MPI
+ *	 but copy it transparently.
+ */
+MPI mpi_copy(MPI a)
+{
+	int i;
+	MPI b;
+
+	if (a) {
+		b = mpi_alloc(a->nlimbs);
+		b->nlimbs = a->nlimbs;
+		b->sign = a->sign;
+		b->flags = a->flags;
+		b->flags &= ~(16|32); /* Reset the immutable and constant flags. */
+		for (i = 0; i < b->nlimbs; i++)
+			b->d[i] = a->d[i];
+	} else
+		b = NULL;
+	return b;
+}
+
+/****************
+ * This function allocates an MPI which is optimized to hold
+ * a value as large as the one given in the argument and allocates it
+ * with the same flags as A.
+ */
+MPI mpi_alloc_like(MPI a)
+{
+	MPI b;
+
+	if (a) {
+		b = mpi_alloc(a->nlimbs);
+		b->nlimbs = 0;
+		b->sign = 0;
+		b->flags = a->flags;
+	} else
+		b = NULL;
+
+	return b;
+}
+
+
+/* Set U into W and release U.  If W is NULL only U will be released. */
+void mpi_snatch(MPI w, MPI u)
+{
+	if (w) {
+		mpi_assign_limb_space(w, u->d, u->alloced);
+		w->nlimbs = u->nlimbs;
+		w->sign   = u->sign;
+		w->flags  = u->flags;
+		u->alloced = 0;
+		u->nlimbs = 0;
+		u->d = NULL;
+	}
+	mpi_free(u);
+}
+
+
+MPI mpi_set(MPI w, MPI u)
+{
+	mpi_ptr_t wp, up;
+	mpi_size_t usize = u->nlimbs;
+	int usign = u->sign;
+
+	if (!w)
+		w = mpi_alloc(mpi_get_nlimbs(u));
+	RESIZE_IF_NEEDED(w, usize);
+	wp = w->d;
+	up = u->d;
+	MPN_COPY(wp, up, usize);
+	w->nlimbs = usize;
+	w->flags = u->flags;
+	w->flags &= ~(16|32); /* Reset the immutable and constant flags.  */
+	w->sign = usign;
+	return w;
+}
+EXPORT_SYMBOL_GPL(mpi_set);
+
+MPI mpi_set_ui(MPI w, unsigned long u)
+{
+	if (!w)
+		w = mpi_alloc(1);
+	/* FIXME: If U is 0 we have no need to resize and thus possible
+	 * allocating the the limbs.
+	 */
+	RESIZE_IF_NEEDED(w, 1);
+	w->d[0] = u;
+	w->nlimbs = u ? 1 : 0;
+	w->sign = 0;
+	w->flags = 0;
+	return w;
+}
+EXPORT_SYMBOL_GPL(mpi_set_ui);
+
+MPI mpi_alloc_set_ui(unsigned long u)
+{
+	MPI w = mpi_alloc(1);
+	w->d[0] = u;
+	w->nlimbs = u ? 1 : 0;
+	w->sign = 0;
+	return w;
+}
+
+/****************
+ * Swap the value of A and B, when SWAP is 1.
+ * Leave the value when SWAP is 0.
+ * This implementation should be constant-time regardless of SWAP.
+ */
+void mpi_swap_cond(MPI a, MPI b, unsigned long swap)
+{
+	mpi_size_t i;
+	mpi_size_t nlimbs;
+	mpi_limb_t mask = ((mpi_limb_t)0) - swap;
+	mpi_limb_t x;
+
+	if (a->alloced > b->alloced)
+		nlimbs = b->alloced;
+	else
+		nlimbs = a->alloced;
+	if (a->nlimbs > nlimbs || b->nlimbs > nlimbs)
+		return;
+
+	for (i = 0; i < nlimbs; i++) {
+		x = mask & (a->d[i] ^ b->d[i]);
+		a->d[i] = a->d[i] ^ x;
+		b->d[i] = b->d[i] ^ x;
+	}
+
+	x = mask & (a->nlimbs ^ b->nlimbs);
+	a->nlimbs = a->nlimbs ^ x;
+	b->nlimbs = b->nlimbs ^ x;
+
+	x = mask & (a->sign ^ b->sign);
+	a->sign = a->sign ^ x;
+	b->sign = b->sign ^ x;
+}
+
 MODULE_DESCRIPTION("Multiprecision maths library");
 MODULE_LICENSE("GPL");