diff options
Diffstat (limited to 'kernel/time')
| -rw-r--r-- | kernel/time/clocksource.c | 45 | ||||
| -rw-r--r-- | kernel/time/sched_clock.c | 111 |
2 files changed, 91 insertions, 65 deletions
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index 50a8736757f3..637a14af6c21 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -537,40 +537,55 @@ static u32 clocksource_max_adjustment(struct clocksource *cs) } /** - * clocksource_max_deferment - Returns max time the clocksource can be deferred - * @cs: Pointer to clocksource - * + * clocks_calc_max_nsecs - Returns maximum nanoseconds that can be converted + * @mult: cycle to nanosecond multiplier + * @shift: cycle to nanosecond divisor (power of two) + * @maxadj: maximum adjustment value to mult (~11%) + * @mask: bitmask for two's complement subtraction of non 64 bit counters */ -static u64 clocksource_max_deferment(struct clocksource *cs) +u64 clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask) { u64 max_nsecs, max_cycles; /* * Calculate the maximum number of cycles that we can pass to the * cyc2ns function without overflowing a 64-bit signed result. The - * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj) + * maximum number of cycles is equal to ULLONG_MAX/(mult+maxadj) * which is equivalent to the below. - * max_cycles < (2^63)/(cs->mult + cs->maxadj) - * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj))) - * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj)) - * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj)) - * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj)) + * max_cycles < (2^63)/(mult + maxadj) + * max_cycles < 2^(log2((2^63)/(mult + maxadj))) + * max_cycles < 2^(log2(2^63) - log2(mult + maxadj)) + * max_cycles < 2^(63 - log2(mult + maxadj)) + * max_cycles < 1 << (63 - log2(mult + maxadj)) * Please note that we add 1 to the result of the log2 to account for * any rounding errors, ensure the above inequality is satisfied and * no overflow will occur. */ - max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1)); + max_cycles = 1ULL << (63 - (ilog2(mult + maxadj) + 1)); /* * The actual maximum number of cycles we can defer the clocksource is - * determined by the minimum of max_cycles and cs->mask. + * determined by the minimum of max_cycles and mask. * Note: Here we subtract the maxadj to make sure we don't sleep for * too long if there's a large negative adjustment. */ - max_cycles = min_t(u64, max_cycles, (u64) cs->mask); - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj, - cs->shift); + max_cycles = min(max_cycles, mask); + max_nsecs = clocksource_cyc2ns(max_cycles, mult - maxadj, shift); + + return max_nsecs; +} + +/** + * clocksource_max_deferment - Returns max time the clocksource can be deferred + * @cs: Pointer to clocksource + * + */ +static u64 clocksource_max_deferment(struct clocksource *cs) +{ + u64 max_nsecs; + max_nsecs = clocks_calc_max_nsecs(cs->mult, cs->shift, cs->maxadj, + cs->mask); /* * To ensure that the clocksource does not wrap whilst we are idle, * limit the time the clocksource can be deferred by 12.5%. Please diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c index 0b479a6a22bb..f388baeaf2b6 100644 --- a/kernel/time/sched_clock.c +++ b/kernel/time/sched_clock.c @@ -8,25 +8,28 @@ #include <linux/clocksource.h> #include <linux/init.h> #include <linux/jiffies.h> +#include <linux/ktime.h> #include <linux/kernel.h> #include <linux/moduleparam.h> #include <linux/sched.h> #include <linux/syscore_ops.h> -#include <linux/timer.h> +#include <linux/hrtimer.h> #include <linux/sched_clock.h> +#include <linux/seqlock.h> +#include <linux/bitops.h> struct clock_data { + ktime_t wrap_kt; u64 epoch_ns; - u32 epoch_cyc; - u32 epoch_cyc_copy; + u64 epoch_cyc; + seqcount_t seq; unsigned long rate; u32 mult; u32 shift; bool suspended; }; -static void sched_clock_poll(unsigned long wrap_ticks); -static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static struct hrtimer sched_clock_timer; static int irqtime = -1; core_param(irqtime, irqtime, int, 0400); @@ -35,14 +38,25 @@ static struct clock_data cd = { .mult = NSEC_PER_SEC / HZ, }; -static u32 __read_mostly sched_clock_mask = 0xffffffff; +static u64 __read_mostly sched_clock_mask; -static u32 notrace jiffy_sched_clock_read(void) +static u64 notrace jiffy_sched_clock_read(void) { - return (u32)(jiffies - INITIAL_JIFFIES); + /* + * We don't need to use get_jiffies_64 on 32-bit arches here + * because we register with BITS_PER_LONG + */ + return (u64)(jiffies - INITIAL_JIFFIES); } -static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; +static u32 __read_mostly (*read_sched_clock_32)(void); + +static u64 notrace read_sched_clock_32_wrapper(void) +{ + return read_sched_clock_32(); +} + +static u64 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) { @@ -52,25 +66,18 @@ static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) static unsigned long long notrace sched_clock_32(void) { u64 epoch_ns; - u32 epoch_cyc; - u32 cyc; + u64 epoch_cyc; + u64 cyc; + unsigned long seq; if (cd.suspended) return cd.epoch_ns; - /* - * Load the epoch_cyc and epoch_ns atomically. We do this by - * ensuring that we always write epoch_cyc, epoch_ns and - * epoch_cyc_copy in strict order, and read them in strict order. - * If epoch_cyc and epoch_cyc_copy are not equal, then we're in - * the middle of an update, and we should repeat the load. - */ do { + seq = read_seqcount_begin(&cd.seq); epoch_cyc = cd.epoch_cyc; - smp_rmb(); epoch_ns = cd.epoch_ns; - smp_rmb(); - } while (epoch_cyc != cd.epoch_cyc_copy); + } while (read_seqcount_retry(&cd.seq, seq)); cyc = read_sched_clock(); cyc = (cyc - epoch_cyc) & sched_clock_mask; @@ -83,49 +90,46 @@ static unsigned long long notrace sched_clock_32(void) static void notrace update_sched_clock(void) { unsigned long flags; - u32 cyc; + u64 cyc; u64 ns; cyc = read_sched_clock(); ns = cd.epoch_ns + cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask, cd.mult, cd.shift); - /* - * Write epoch_cyc and epoch_ns in a way that the update is - * detectable in cyc_to_fixed_sched_clock(). - */ + raw_local_irq_save(flags); - cd.epoch_cyc_copy = cyc; - smp_wmb(); + write_seqcount_begin(&cd.seq); cd.epoch_ns = ns; - smp_wmb(); cd.epoch_cyc = cyc; + write_seqcount_end(&cd.seq); raw_local_irq_restore(flags); } -static void sched_clock_poll(unsigned long wrap_ticks) +static enum hrtimer_restart sched_clock_poll(struct hrtimer *hrt) { - mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); update_sched_clock(); + hrtimer_forward_now(hrt, cd.wrap_kt); + return HRTIMER_RESTART; } -void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) +void __init sched_clock_register(u64 (*read)(void), int bits, + unsigned long rate) { - unsigned long r, w; + unsigned long r; u64 res, wrap; char r_unit; if (cd.rate > rate) return; - BUG_ON(bits > 32); WARN_ON(!irqs_disabled()); read_sched_clock = read; - sched_clock_mask = (1ULL << bits) - 1; + sched_clock_mask = CLOCKSOURCE_MASK(bits); cd.rate = rate; /* calculate the mult/shift to convert counter ticks to ns. */ - clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); + clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 3600); r = rate; if (r >= 4000000) { @@ -138,20 +142,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) r_unit = ' '; /* calculate how many ns until we wrap */ - wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift); - do_div(wrap, NSEC_PER_MSEC); - w = wrap; + wrap = clocks_calc_max_nsecs(cd.mult, cd.shift, 0, sched_clock_mask); + cd.wrap_kt = ns_to_ktime(wrap - (wrap >> 3)); /* calculate the ns resolution of this counter */ res = cyc_to_ns(1ULL, cd.mult, cd.shift); - pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n", - bits, r, r_unit, res, w); + pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lluns\n", + bits, r, r_unit, res, wrap); - /* - * Start the timer to keep sched_clock() properly updated and - * sets the initial epoch. - */ - sched_clock_timer.data = msecs_to_jiffies(w - (w / 10)); update_sched_clock(); /* @@ -166,6 +164,12 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) pr_debug("Registered %pF as sched_clock source\n", read); } +void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) +{ + read_sched_clock_32 = read; + sched_clock_register(read_sched_clock_32_wrapper, bits, rate); +} + unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32; unsigned long long notrace sched_clock(void) @@ -180,14 +184,22 @@ void __init sched_clock_postinit(void) * make it the final one one. */ if (read_sched_clock == jiffy_sched_clock_read) - setup_sched_clock(jiffy_sched_clock_read, 32, HZ); + sched_clock_register(jiffy_sched_clock_read, BITS_PER_LONG, HZ); - sched_clock_poll(sched_clock_timer.data); + update_sched_clock(); + + /* + * Start the timer to keep sched_clock() properly updated and + * sets the initial epoch. + */ + hrtimer_init(&sched_clock_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + sched_clock_timer.function = sched_clock_poll; + hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL); } static int sched_clock_suspend(void) { - sched_clock_poll(sched_clock_timer.data); + sched_clock_poll(&sched_clock_timer); cd.suspended = true; return 0; } @@ -195,7 +207,6 @@ static int sched_clock_suspend(void) static void sched_clock_resume(void) { cd.epoch_cyc = read_sched_clock(); - cd.epoch_cyc_copy = cd.epoch_cyc; cd.suspended = false; } |