diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/.gitignore | 2 | ||||
| -rw-r--r-- | init/Kconfig | 54 | ||||
| -rw-r--r-- | init/Makefile | 57 | ||||
| -rwxr-xr-x | init/build-version | 10 | ||||
| -rw-r--r-- | init/do_mounts_initrd.c | 10 | ||||
| -rw-r--r-- | init/main.c | 28 | ||||
| -rw-r--r-- | init/version-timestamp.c | 31 | ||||
| -rw-r--r-- | init/version.c | 37 |
8 files changed, 161 insertions, 68 deletions
diff --git a/init/.gitignore b/init/.gitignore new file mode 100644 index 000000000000..cbbe270cec00 --- /dev/null +++ b/init/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +/utsversion-tmp.h diff --git a/init/Kconfig b/init/Kconfig index b5799347fb52..694f7c160c9c 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -60,6 +60,17 @@ config LLD_VERSION default $(ld-version) if LD_IS_LLD default 0 +config RUST_IS_AVAILABLE + def_bool $(success,$(srctree)/scripts/rust_is_available.sh) + help + This shows whether a suitable Rust toolchain is available (found). + + Please see Documentation/rust/quick-start.rst for instructions on how + to satify the build requirements of Rust support. + + In particular, the Makefile target 'rustavailable' is useful to check + why the Rust toolchain is not being detected. + config CC_CAN_LINK bool default $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(m64-flag)) if 64BIT @@ -147,7 +158,8 @@ config WERROR default COMPILE_TEST help A kernel build should not cause any compiler warnings, and this - enables the '-Werror' flag to enforce that rule by default. + enables the '-Werror' (for C) and '-Dwarnings' (for Rust) flags + to enforce that rule by default. However, if you have a new (or very old) compiler with odd and unusual warnings, or you have some architecture with problems, @@ -461,8 +473,7 @@ config VIRT_CPU_ACCOUNTING choice prompt "Cputime accounting" - default TICK_CPU_ACCOUNTING if !PPC64 - default VIRT_CPU_ACCOUNTING_NATIVE if PPC64 + default TICK_CPU_ACCOUNTING # Kind of a stub config for the pure tick based cputime accounting config TICK_CPU_ACCOUNTING @@ -958,11 +969,6 @@ config MEMCG help Provides control over the memory footprint of tasks in a cgroup. -config MEMCG_SWAP - bool - depends on MEMCG && SWAP - default y - config MEMCG_KMEM bool depends on MEMCG && !SLOB @@ -1900,6 +1906,38 @@ config PROFILING Say Y here to enable the extended profiling support mechanisms used by profilers. +config RUST + bool "Rust support" + depends on HAVE_RUST + depends on RUST_IS_AVAILABLE + depends on !MODVERSIONS + depends on !GCC_PLUGINS + depends on !RANDSTRUCT + depends on !DEBUG_INFO_BTF + select CONSTRUCTORS + help + Enables Rust support in the kernel. + + This allows other Rust-related options, like drivers written in Rust, + to be selected. + + It is also required to be able to load external kernel modules + written in Rust. + + See Documentation/rust/ for more information. + + If unsure, say N. + +config RUSTC_VERSION_TEXT + string + depends on RUST + default $(shell,command -v $(RUSTC) >/dev/null 2>&1 && $(RUSTC) --version || echo n) + +config BINDGEN_VERSION_TEXT + string + depends on RUST + default $(shell,command -v $(BINDGEN) >/dev/null 2>&1 && $(BINDGEN) --version || echo n) + # # Place an empty function call at each tracepoint site. Can be # dynamically changed for a probe function. diff --git a/init/Makefile b/init/Makefile index d82623d7fc8e..8316c23bead2 100644 --- a/init/Makefile +++ b/init/Makefile @@ -19,20 +19,43 @@ mounts-y := do_mounts.o mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o -# dependencies on generated files need to be listed explicitly -$(obj)/version.o: include/generated/compile.h - -# compile.h changes depending on hostname, generation number, etc, -# so we regenerate it always. -# mkcompile_h will make sure to only update the -# actual file if its content has changed. - -quiet_cmd_compile.h = CHK $@ - cmd_compile.h = \ - $(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \ - "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT_BUILD)" \ - "$(CONFIG_PREEMPT_DYNAMIC)" "$(CONFIG_PREEMPT_RT)" \ - "$(CONFIG_CC_VERSION_TEXT)" "$(LD)" - -include/generated/compile.h: FORCE - $(call cmd,compile.h) +# +# UTS_VERSION +# + +smp-flag-$(CONFIG_SMP) := SMP +preempt-flag-$(CONFIG_PREEMPT_BUILD) := PREEMPT +preempt-flag-$(CONFIG_PREEMPT_DYNAMIC) := PREEMPT_DYNAMIC +preempt-flag-$(CONFIG_PREEMPT_RT) := PREEMPT_RT + +build-version = $(or $(KBUILD_BUILD_VERSION), $(build-version-auto)) +build-timestamp = $(or $(KBUILD_BUILD_TIMESTAMP), $(build-timestamp-auto)) + +# Maximum length of UTS_VERSION is 64 chars +filechk_uts_version = \ + utsver=$$(echo '$(pound)'"$(build-version)" $(smp-flag-y) $(preempt-flag-y) "$(build-timestamp)" | cut -b -64); \ + echo '$(pound)'define UTS_VERSION \""$${utsver}"\" + +# +# Build version.c with temporary UTS_VERSION +# + +$(obj)/utsversion-tmp.h: FORCE + $(call filechk,uts_version) + +clean-files += utsversion-tmp.h + +$(obj)/version.o: $(obj)/utsversion-tmp.h +CFLAGS_version.o := -include $(obj)/utsversion-tmp.h + +# +# Build version-timestamp.c with final UTS_VERSION +# + +include/generated/utsversion.h: build-version-auto = $(shell $(srctree)/$(src)/build-version) +include/generated/utsversion.h: build-timestamp-auto = $(shell LC_ALL=C date) +include/generated/utsversion.h: FORCE + $(call filechk,uts_version) + +$(obj)/version-timestamp.o: include/generated/utsversion.h +CFLAGS_version-timestamp.o := -include include/generated/utsversion.h diff --git a/init/build-version b/init/build-version new file mode 100755 index 000000000000..537d45815083 --- /dev/null +++ b/init/build-version @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +prev_ver=$(cat .version 2>/dev/null) && +ver=$(expr ${prev_ver} + 1 2>/dev/null) || +ver=1 + +echo ${ver} > .version + +echo ${ver} diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index 327962ea354c..34731241377d 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -99,19 +99,11 @@ static void __init handle_initrd(void) init_mkdir("/old", 0700); init_chdir("/old"); - /* - * In case that a resume from disk is carried out by linuxrc or one of - * its children, we need to tell the freezer not to wait for us. - */ - current->flags |= PF_FREEZER_SKIP; - info = call_usermodehelper_setup("/linuxrc", argv, envp_init, GFP_KERNEL, init_linuxrc, NULL, NULL); if (!info) return; - call_usermodehelper_exec(info, UMH_WAIT_PROC); - - current->flags &= ~PF_FREEZER_SKIP; + call_usermodehelper_exec(info, UMH_WAIT_PROC|UMH_FREEZABLE); /* move initrd to rootfs' /old */ init_mount("..", ".", NULL, MS_MOVE, NULL); diff --git a/init/main.c b/init/main.c index 22255723599b..aa21add5f7c5 100644 --- a/init/main.c +++ b/init/main.c @@ -34,6 +34,7 @@ #include <linux/percpu.h> #include <linux/kmod.h> #include <linux/kprobes.h> +#include <linux/kmsan.h> #include <linux/vmalloc.h> #include <linux/kernel_stat.h> #include <linux/start_kernel.h> @@ -117,6 +118,7 @@ static int kernel_init(void *); extern void init_IRQ(void); extern void radix_tree_init(void); +extern void maple_tree_init(void); /* * Debug helper: via this flag we know that we are in 'early bootup code' @@ -836,6 +838,7 @@ static void __init mm_init(void) init_mem_debugging_and_hardening(); kfence_alloc_pool(); report_meminit(); + kmsan_init_shadow(); stack_depot_early_init(); mem_init(); mem_init_print_info(); @@ -849,10 +852,14 @@ static void __init mm_init(void) pgtable_init(); debug_objects_mem_init(); vmalloc_init(); + /* Should be run after vmap initialization */ + if (early_page_ext_enabled()) + page_ext_init(); /* Should be run before the first non-init thread is created */ init_espfix_bsp(); /* Should be run after espfix64 is set up. */ pti_init(); + kmsan_init_runtime(); } #ifdef CONFIG_RANDOMIZE_KSTACK_OFFSET @@ -976,6 +983,9 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) parse_args("Setting extra init args", extra_init_args, NULL, 0, -1, -1, NULL, set_init_arg); + /* Architectural and non-timekeeping rng init, before allocator init */ + random_init_early(command_line); + /* * These use large bootmem allocations and must precede * kmem_cache_init() @@ -1002,6 +1012,7 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) "Interrupts were enabled *very* early, fixing it\n")) local_irq_disable(); radix_tree_init(); + maple_tree_init(); /* * Set up housekeeping before setting up workqueues to allow the unbound @@ -1035,17 +1046,13 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) hrtimers_init(); softirq_init(); timekeeping_init(); - kfence_init(); time_init(); - /* - * For best initial stack canary entropy, prepare it after: - * - setup_arch() for any UEFI RNG entropy and boot cmdline access - * - timekeeping_init() for ktime entropy used in random_init() - * - time_init() for making random_get_entropy() work on some platforms - * - random_init() to initialize the RNG from from early entropy sources - */ - random_init(command_line); + /* This must be after timekeeping is initialized */ + random_init(); + + /* These make use of the fully initialized rng */ + kfence_init(); boot_init_stack_canary(); perf_event_init(); @@ -1618,7 +1625,8 @@ static noinline void __init kernel_init_freeable(void) padata_init(); page_alloc_init_late(); /* Initialize page ext after all struct pages are initialized. */ - page_ext_init(); + if (!early_page_ext_enabled()) + page_ext_init(); do_basic_setup(); diff --git a/init/version-timestamp.c b/init/version-timestamp.c new file mode 100644 index 000000000000..179e93bae539 --- /dev/null +++ b/init/version-timestamp.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <generated/compile.h> +#include <generated/utsrelease.h> +#include <linux/version.h> +#include <linux/proc_ns.h> +#include <linux/refcount.h> +#include <linux/uts.h> +#include <linux/utsname.h> + +struct uts_namespace init_uts_ns = { + .ns.count = REFCOUNT_INIT(2), + .name = { + .sysname = UTS_SYSNAME, + .nodename = UTS_NODENAME, + .release = UTS_RELEASE, + .version = UTS_VERSION, + .machine = UTS_MACHINE, + .domainname = UTS_DOMAINNAME, + }, + .user_ns = &init_user_ns, + .ns.inum = PROC_UTS_INIT_INO, +#ifdef CONFIG_UTS_NS + .ns.ops = &utsns_operations, +#endif +}; + +/* FIXED STRINGS! Don't touch! */ +const char linux_banner[] = + "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" + LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n"; diff --git a/init/version.c b/init/version.c index b7f9559d417c..01d4ab05f0ba 100644 --- a/init/version.c +++ b/init/version.c @@ -16,27 +16,8 @@ #include <linux/uts.h> #include <linux/utsname.h> #include <generated/utsrelease.h> -#include <linux/version.h> #include <linux/proc_ns.h> -struct uts_namespace init_uts_ns = { - .ns.count = REFCOUNT_INIT(2), - .name = { - .sysname = UTS_SYSNAME, - .nodename = UTS_NODENAME, - .release = UTS_RELEASE, - .version = UTS_VERSION, - .machine = UTS_MACHINE, - .domainname = UTS_DOMAINNAME, - }, - .user_ns = &init_user_ns, - .ns.inum = PROC_UTS_INIT_INO, -#ifdef CONFIG_UTS_NS - .ns.ops = &utsns_operations, -#endif -}; -EXPORT_SYMBOL_GPL(init_uts_ns); - static int __init early_hostname(char *arg) { size_t bufsize = sizeof(init_uts_ns.name.nodename); @@ -52,11 +33,6 @@ static int __init early_hostname(char *arg) } early_param("hostname", early_hostname); -/* FIXED STRINGS! Don't touch! */ -const char linux_banner[] = - "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" - LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n"; - const char linux_proc_banner[] = "%s version %s" " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")" @@ -64,3 +40,16 @@ const char linux_proc_banner[] = BUILD_SALT; BUILD_LTO_INFO; + +/* + * init_uts_ns and linux_banner contain the build version and timestamp, + * which are really fixed at the very last step of build process. + * They are compiled with __weak first, and without __weak later. + */ + +struct uts_namespace init_uts_ns __weak; +const char linux_banner[] __weak; + +#include "version-timestamp.c" + +EXPORT_SYMBOL_GPL(init_uts_ns); |