diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/platform_data/max310x.h | 64 | ||||
| -rw-r--r-- | include/linux/platform_data/serial-imx.h | 2 | ||||
| -rw-r--r-- | include/linux/serial_bcm63xx.h | 2 | ||||
| -rw-r--r-- | include/linux/serial_sci.h | 93 | ||||
| -rw-r--r-- | include/linux/tty.h | 2 | ||||
| -rw-r--r-- | include/linux/tty_ldisc.h | 1 |
6 files changed, 61 insertions, 103 deletions
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h deleted file mode 100644 index dd11dcd1a184..000000000000 --- a/include/linux/platform_data/max310x.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver - * - * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> - * - * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> - * Based on max3110.c, by Feng Tang <feng.tang@intel.com> - * Based on max3107.c, by Aavamobile - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _MAX310X_H_ -#define _MAX310X_H_ - -/* - * Example board initialization data: - * - * static struct max310x_pdata max3107_pdata = { - * .driver_flags = MAX310X_EXT_CLK, - * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL, - * .frequency = 3686400, - * .gpio_base = -1, - * }; - * - * static struct spi_board_info spi_device_max3107[] = { - * { - * .modalias = "max3107", - * .irq = IRQ_EINT3, - * .bus_num = 1, - * .chip_select = 1, - * .platform_data = &max3107_pdata, - * }, - * }; - */ - -#define MAX310X_MAX_UARTS 4 - -/* MAX310X platform data structure */ -struct max310x_pdata { - /* Flags global to driver */ - const u8 driver_flags; -#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ - /* Flags global to UART port */ - const u8 uart_flags[MAX310X_MAX_UARTS]; -#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */ -#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */ -#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction - * control (RS-485) - */ - /* Frequency (extrenal clock or crystal) */ - const int frequency; - /* GPIO base number (can be negative) */ - const int gpio_base; - /* Called during startup */ - void (*init)(void); - /* Called before finish */ - void (*exit)(void); -}; - -#endif diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h index 4adec9b154dd..3cc2e3c40914 100644 --- a/include/linux/platform_data/serial-imx.h +++ b/include/linux/platform_data/serial-imx.h @@ -23,8 +23,6 @@ #define IMXUART_IRDA (1<<1) struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); unsigned int flags; void (*irda_enable)(int enable); unsigned int irda_inv_rx:1; diff --git a/include/linux/serial_bcm63xx.h b/include/linux/serial_bcm63xx.h index 570e964dc899..a80aa1a5bee2 100644 --- a/include/linux/serial_bcm63xx.h +++ b/include/linux/serial_bcm63xx.h @@ -116,4 +116,6 @@ UART_FIFO_PARERR_MASK | \ UART_FIFO_BRKDET_MASK) +#define UART_REG_SIZE 24 + #endif /* _LINUX_SERIAL_BCM63XX_H */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 22b3640c9424..6c5e3bb282b0 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -10,45 +10,59 @@ #define SCIx_NOT_SUPPORTED (-1) -#define SCSCR_TIE (1 << 7) -#define SCSCR_RIE (1 << 6) -#define SCSCR_TE (1 << 5) -#define SCSCR_RE (1 << 4) -#define SCSCR_REIE (1 << 3) /* not supported by all parts */ -#define SCSCR_TOIE (1 << 2) /* not supported by all parts */ -#define SCSCR_CKE1 (1 << 1) -#define SCSCR_CKE0 (1 << 0) - -/* SCxSR SCI */ -#define SCI_TDRE 0x80 -#define SCI_RDRF 0x40 -#define SCI_ORER 0x20 -#define SCI_FER 0x10 -#define SCI_PER 0x08 -#define SCI_TEND 0x04 +/* SCSMR (Serial Mode Register) */ +#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ +#define SCSMR_PE (1 << 5) /* Parity Enable */ +#define SCSMR_ODD (1 << 4) /* Odd Parity */ +#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Control Register (@ = not supported by all parts) */ +#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ +#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ +#define SCSCR_TE (1 << 5) /* Transmit Enable */ +#define SCSCR_RE (1 << 4) /* Receive Enable */ +#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */ +#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ +#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ +#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ +/* SCIFA/SCIFB only */ +#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ +#define SCI_RDRF 0x40 /* Receive Data Register Full */ +#define SCI_ORER 0x20 /* Overrun Error */ +#define SCI_FER 0x10 /* Framing Error */ +#define SCI_PER 0x08 /* Parity Error */ +#define SCI_TEND 0x04 /* Transmit End */ #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) -/* SCxSR SCIF, HSCIF */ -#define SCIF_ER 0x0080 -#define SCIF_TEND 0x0040 -#define SCIF_TDFE 0x0020 -#define SCIF_BRK 0x0010 -#define SCIF_FER 0x0008 -#define SCIF_PER 0x0004 -#define SCIF_RDF 0x0002 -#define SCIF_DR 0x0001 +/* SCxSR (Serial Status Register) on SCIF, HSCIF */ +#define SCIF_ER 0x0080 /* Receive Error */ +#define SCIF_TEND 0x0040 /* Transmission End */ +#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SCIF_BRK 0x0010 /* Break Detect */ +#define SCIF_FER 0x0008 /* Framing Error */ +#define SCIF_PER 0x0004 /* Parity Error */ +#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ +#define SCIF_DR 0x0001 /* Receive Data Ready */ #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -/* SCSPTR, optional */ -#define SCSPTR_RTSIO (1 << 7) -#define SCSPTR_CTSIO (1 << 5) -#define SCSPTR_SPB2IO (1 << 1) -#define SCSPTR_SPB2DT (1 << 0) +/* SCFCR (FIFO Control Register) */ +#define SCFCR_LOOP (1 << 0) /* Loopback Test */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ /* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 +#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ enum { SCIx_PROBE_REGTYPE, @@ -73,10 +87,19 @@ enum { * Not all registers will exist on all parts. */ enum { - SCSMR, SCBRR, SCSCR, SCxSR, - SCFCR, SCFDR, SCxTDR, SCxRDR, - SCLSR, SCTFDR, SCRFDR, SCSPTR, - HSSRR, + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ SCIx_NR_REGS, }; diff --git a/include/linux/tty.h b/include/linux/tty.h index 90b4fdc8a61f..b90b5c221ff0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -208,7 +208,7 @@ struct tty_port { wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ unsigned char console:1, /* port is a console */ - low_latency:1; /* direct buffer flush */ + low_latency:1; /* optional: tune for latency */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index b8347c207cb8..add26da2faeb 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -126,7 +126,6 @@ #include <linux/fs.h> #include <linux/wait.h> -#include <linux/wait.h> /* |