diff options
Diffstat (limited to 'include')
40 files changed, 265 insertions, 231 deletions
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index f4c38d8c6674..2292d1af9d70 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -685,9 +685,15 @@ __SYSCALL(__NR_syncfs, sys_syncfs) __SYSCALL(__NR_setns, sys_setns) #define __NR_sendmmsg 269 __SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg) +#define __NR_process_vm_readv 270 +__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ + compat_sys_process_vm_readv) +#define __NR_process_vm_writev 271 +__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ + compat_sys_process_vm_writev) #undef __NR_syscalls -#define __NR_syscalls 270 +#define __NR_syscalls 272 /* * All syscalls below here should go away really, diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index f81676f1b310..14b6cd022284 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -182,8 +182,11 @@ {0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -195,8 +198,18 @@ {0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ @@ -238,6 +251,7 @@ {0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x68fa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -480,6 +494,8 @@ {0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ @@ -494,6 +510,8 @@ {0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 1d161cb3aca5..12050434d57a 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -32,17 +32,16 @@ /** * User-desired buffer creation information structure. * - * @size: requested size for the object. + * @size: user-desired memory allocation size. * - this size value would be page-aligned internally. * @flags: user request for setting memory type or cache attributes. - * @handle: returned handle for the object. - * @pad: just padding to be 64-bit aligned. + * @handle: returned a handle to created gem object. + * - this handle will be set by gem module of kernel side. */ struct drm_exynos_gem_create { - unsigned int size; + uint64_t size; unsigned int flags; unsigned int handle; - unsigned int pad; }; /** diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c7a6d3b5bc7b..94acd8172b5b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -805,9 +805,6 @@ extern void blk_unprep_request(struct request *); */ extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id); -extern struct request_queue *blk_init_allocated_queue_node(struct request_queue *, - request_fn_proc *, - spinlock_t *, int node_id); extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *); extern struct request_queue *blk_init_allocated_queue(struct request_queue *, request_fn_proc *, spinlock_t *); diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 139c4db55f17..081147da0564 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -71,7 +71,7 @@ struct timecounter { /** * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds - * @tc: Pointer to cycle counter. + * @cc: Pointer to cycle counter. * @cycles: Cycles * * XXX - This could use some mult_lxl_ll() asm optimization. Same code @@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc); * time base as values returned by * timecounter_read() * @tc: Pointer to time counter. - * @cycle: a value returned by tc->cc->read() + * @cycle_tstamp: a value returned by tc->cc->read() * * Cycle counts that are converted correctly as long as they * fall into the interval [-1/2 max cycle count, +1/2 max cycle count], @@ -156,10 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) + * @maxadj: maximum adjustment value to mult (~11%) * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary * @resume: resume function for the clocksource, if necessary + * @cycle_last: most recent cycle counter value seen by ::read() */ struct clocksource { /* @@ -172,7 +174,7 @@ struct clocksource { u32 mult; u32 shift; u64 max_idle_ns; - + u32 maxadj; #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA struct arch_clocksource_data archdata; #endif @@ -186,6 +188,7 @@ struct clocksource { void (*suspend)(struct clocksource *cs); void (*resume)(struct clocksource *cs); + /* private: */ #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ struct list_head wd_list; @@ -260,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) /** * clocksource_cyc2ns - converts clocksource cycles to nanoseconds + * @cycles: cycles + * @mult: cycle to nanosecond multiplier + * @shift: cycle to nanosecond divisor (power of two) * * Converts cycles to nanoseconds, using the given mult and shift. * diff --git a/include/linux/compat.h b/include/linux/compat.h index 154bf5683015..66ed067fb729 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -552,5 +552,14 @@ extern ssize_t compat_rw_copy_check_uvector(int type, extern void __user *compat_alloc_user_space(unsigned long len); +asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); +asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4df926199369..ed9f74f6c519 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -339,7 +339,8 @@ extern int d_validate(struct dentry *, struct dentry *); */ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); -extern char *__d_path(const struct path *path, struct path *root, char *, int); +extern char *__d_path(const struct path *, const struct path *, char *, int); +extern char *d_absolute_path(const struct path *, char *, int); extern char *d_path(const struct path *, char *, int); extern char *d_path_with_unreachable(const struct path *, char *, int); extern char *dentry_path_raw(struct dentry *, char *, int); diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h index ef90cbd8e173..57c9a8ae4f2d 100644 --- a/include/linux/dma_remapping.h +++ b/include/linux/dma_remapping.h @@ -31,6 +31,7 @@ extern void free_dmar_iommu(struct intel_iommu *iommu); extern int iommu_calculate_agaw(struct intel_iommu *iommu); extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu); extern int dmar_disabled; +extern int intel_iommu_enabled; #else static inline int iommu_calculate_agaw(struct intel_iommu *iommu) { @@ -44,6 +45,7 @@ static inline void free_dmar_iommu(struct intel_iommu *iommu) { } #define dmar_disabled (1) +#define intel_iommu_enabled (0) #endif diff --git a/include/linux/fs.h b/include/linux/fs.h index e3130220ce3e..e0bc4ffb8e7f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -393,8 +393,8 @@ struct inodes_stat_t { #include <linux/semaphore.h> #include <linux/fiemap.h> #include <linux/rculist_bl.h> -#include <linux/shrinker.h> #include <linux/atomic.h> +#include <linux/shrinker.h> #include <asm/byteorder.h> @@ -1942,6 +1942,7 @@ extern int fd_statfs(int, struct kstatfs *); extern int statfs_by_dentry(struct dentry *, struct kstatfs *); extern int freeze_super(struct super_block *super); extern int thaw_super(struct super_block *super); +extern bool our_mnt(struct vfsmount *mnt); extern int current_umask(void); diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 96efa6794ea5..c3da42dd22ba 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -172,6 +172,7 @@ enum { TRACE_EVENT_FL_FILTERED_BIT, TRACE_EVENT_FL_RECORDED_CMD_BIT, TRACE_EVENT_FL_CAP_ANY_BIT, + TRACE_EVENT_FL_NO_SET_FILTER_BIT, }; enum { @@ -179,6 +180,7 @@ enum { TRACE_EVENT_FL_FILTERED = (1 << TRACE_EVENT_FL_FILTERED_BIT), TRACE_EVENT_FL_RECORDED_CMD = (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT), TRACE_EVENT_FL_CAP_ANY = (1 << TRACE_EVENT_FL_CAP_ANY_BIT), + TRACE_EVENT_FL_NO_SET_FILTER = (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT), }; struct ftrace_event_call { diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 94b1e356c02a..32574eef9394 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -126,6 +126,8 @@ extern struct cred init_cred; # define INIT_PERF_EVENTS(tsk) #endif +#define INIT_TASK_COMM "swapper" + /* * INIT_TASK is used to set up the first task table, touch at * your own risk!. Base=0, limit=0x1fffff (=2MB) @@ -162,7 +164,7 @@ extern struct cred init_cred; .group_leader = &tsk, \ RCU_INIT_POINTER(.real_cred, &init_cred), \ RCU_INIT_POINTER(.cred, &init_cred), \ - .comm = "swapper", \ + .comm = INIT_TASK_COMM, \ .thread = INIT_THREAD, \ .fs = &init_fs, \ .files = &init_files, \ diff --git a/include/linux/log2.h b/include/linux/log2.h index 25b808631cd9..fd7ff3d91e6a 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -185,7 +185,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n) #define rounddown_pow_of_two(n) \ ( \ __builtin_constant_p(n) ? ( \ - (n == 1) ? 0 : \ (1UL << ilog2(n))) : \ __rounddown_pow_of_two(n) \ ) diff --git a/include/linux/mm.h b/include/linux/mm.h index 3dc3a8c2c485..4baadd18f4ad 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -10,6 +10,7 @@ #include <linux/mmzone.h> #include <linux/rbtree.h> #include <linux/prio_tree.h> +#include <linux/atomic.h> #include <linux/debug_locks.h> #include <linux/mm_types.h> #include <linux/range.h> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 415f2db414e1..c8ef9bc54d50 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -218,6 +218,7 @@ struct mmc_card { #define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */ #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ +#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 @@ -433,6 +434,11 @@ static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c) return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512; } +static inline int mmc_card_long_read_time(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LONG_READ_TIME; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index cbeb5867cff7..a82ad4dd306a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index e3d0b3890249..7ef68724f0f0 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -12,7 +12,7 @@ struct pci_ats { unsigned int is_enabled:1; /* Enable bit is set */ }; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); @@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return dev->ats && dev->ats->is_enabled; } -#else /* CONFIG_PCI_IOV */ +#else /* CONFIG_PCI_ATS */ static inline int pci_enable_ats(struct pci_dev *dev, int ps) { @@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return 0; } -#endif /* CONFIG_PCI_IOV */ +#endif /* CONFIG_PCI_ATS */ #ifdef CONFIG_PCI_PRI diff --git a/include/linux/pci.h b/include/linux/pci.h index 337df0d5d5f7..7cda65b5f798 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_dev { struct list_head msi_list; #endif struct pci_vpd *vpd; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* SR-IOV capability related */ struct pci_dev *physfn; /* the PF this VF is associated with */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 172ba70306d1..2aaee0ca9da8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -517,8 +517,12 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 #define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 1e9ebe5e0091..b1f89122bf6a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -822,6 +822,7 @@ struct perf_event { int mmap_locked; struct user_struct *mmap_user; struct ring_buffer *rb; + struct list_head rb_entry; /* poll related */ wait_queue_head_t waitq; diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index c5336705921f..7281d5acf2f9 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -30,7 +30,7 @@ */ struct tc_stats { - __u64 bytes; /* NUmber of enqueues bytes */ + __u64 bytes; /* Number of enqueued bytes */ __u32 packets; /* Number of enqueued packets */ __u32 drops; /* Packets dropped because of lack of resources */ __u32 overlimits; /* Number of throttle events when this @@ -297,7 +297,7 @@ struct tc_htb_glob { __u32 debug; /* debug flags */ /* stats */ - __u32 direct_pkts; /* count of non shapped packets */ + __u32 direct_pkts; /* count of non shaped packets */ }; enum { TCA_HTB_UNSPEC, @@ -503,7 +503,7 @@ enum { }; #define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) -/* State transition probablities for 4 state model */ +/* State transition probabilities for 4 state model */ struct tc_netem_gimodel { __u32 p13; __u32 p31; diff --git a/include/linux/pm.h b/include/linux/pm.h index 5c4c8b18c8b7..3f3ed83a9aa5 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -54,118 +54,145 @@ typedef struct pm_message { /** * struct dev_pm_ops - device PM callbacks * - * Several driver power state transitions are externally visible, affecting + * Several device power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be - * internal transitions to various low power modes, which are transparent + * internal transitions to various low-power modes which are transparent * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * - * The externally visible transitions are handled with the help of the following - * callbacks included in this structure: - * - * @prepare: Prepare the device for the upcoming transition, but do NOT change - * its hardware state. Prevent new children of the device from being - * registered after @prepare() returns (the driver's subsystem and - * generally the rest of the kernel is supposed to prevent new calls to the - * probe method from being made too once @prepare() has succeeded). If - * @prepare() detects a situation it cannot handle (e.g. registration of a - * child already in progress), it may return -EAGAIN, so that the PM core - * can execute it once again (e.g. after the new child has been registered) - * to recover from the race condition. This method is executed for all - * kinds of suspend transitions and is followed by one of the suspend - * callbacks: @suspend(), @freeze(), or @poweroff(). - * The PM core executes @prepare() for all devices before starting to - * execute suspend callbacks for any of them, so drivers may assume all of - * the other devices to be present and functional while @prepare() is being - * executed. In particular, it is safe to make GFP_KERNEL memory - * allocations from within @prepare(). However, drivers may NOT assume - * anything about the availability of the user space at that time and it - * is not correct to request firmware from within @prepare() (it's too - * late to do that). [To work around this limitation, drivers may - * register suspend and hibernation notifiers that are executed before the - * freezing of tasks.] + * The externally visible transitions are handled with the help of callbacks + * included in this structure in such a way that two levels of callbacks are + * involved. First, the PM core executes callbacks provided by PM domains, + * device types, classes and bus types. They are the subsystem-level callbacks + * supposed to execute callbacks provided by device drivers, although they may + * choose not to do that. If the driver callbacks are executed, they have to + * collaborate with the subsystem-level callbacks to achieve the goals + * appropriate for the given system transition, given transition phase and the + * subsystem the device belongs to. + * + * @prepare: The principal role of this callback is to prevent new children of + * the device from being registered after it has returned (the driver's + * subsystem and generally the rest of the kernel is supposed to prevent + * new calls to the probe method from being made too once @prepare() has + * succeeded). If @prepare() detects a situation it cannot handle (e.g. + * registration of a child already in progress), it may return -EAGAIN, so + * that the PM core can execute it once again (e.g. after a new child has + * been registered) to recover from the race condition. + * This method is executed for all kinds of suspend transitions and is + * followed by one of the suspend callbacks: @suspend(), @freeze(), or + * @poweroff(). The PM core executes subsystem-level @prepare() for all + * devices before starting to invoke suspend callbacks for any of them, so + * generally devices may be assumed to be functional or to respond to + * runtime resume requests while @prepare() is being executed. However, + * device drivers may NOT assume anything about the availability of user + * space at that time and it is NOT valid to request firmware from within + * @prepare() (it's too late to do that). It also is NOT valid to allocate + * substantial amounts of memory from @prepare() in the GFP_KERNEL mode. + * [To work around these limitations, drivers may register suspend and + * hibernation notifiers to be executed before the freezing of tasks.] * * @complete: Undo the changes made by @prepare(). This method is executed for * all kinds of resume transitions, following one of the resume callbacks: * @resume(), @thaw(), @restore(). Also called if the state transition - * fails before the driver's suspend callback (@suspend(), @freeze(), - * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * fails before the driver's suspend callback: @suspend(), @freeze() or + * @poweroff(), can be executed (e.g. if the suspend callback fails for one * of the other devices that the PM core has unsuccessfully attempted to * suspend earlier). - * The PM core executes @complete() after it has executed the appropriate - * resume callback for all devices. + * The PM core executes subsystem-level @complete() after it has executed + * the appropriate resume callbacks for all devices. * * @suspend: Executed before putting the system into a sleep state in which the - * contents of main memory are preserved. Quiesce the device, put it into - * a low power state appropriate for the upcoming system state (such as - * PCI_D3hot), and enable wakeup events as appropriate. + * contents of main memory are preserved. The exact action to perform + * depends on the device's subsystem (PM domain, device type, class or bus + * type), but generally the device must be quiescent after subsystem-level + * @suspend() has returned, so that it doesn't do any I/O or DMA. + * Subsystem-level @suspend() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @resume: Executed after waking the system up from a sleep state in which the - * contents of main memory were preserved. Put the device into the - * appropriate state, according to the information saved in memory by the - * preceding @suspend(). The driver starts working again, responding to - * hardware events and software requests. The hardware may have gone - * through a power-off reset, or it may have maintained state from the - * previous suspend() which the driver may rely on while resuming. On most - * platforms, there are no restrictions on availability of resources like - * clocks during @resume(). + * contents of main memory were preserved. The exact action to perform + * depends on the device's subsystem, but generally the driver is expected + * to start working again, responding to hardware events and software + * requests (the device itself may be left in a low-power state, waiting + * for a runtime resume to occur). The state of the device at the time its + * driver's @resume() callback is run depends on the platform and subsystem + * the device belongs to. On most platforms, there are no restrictions on + * availability of resources like clocks during @resume(). + * Subsystem-level @resume() is executed for all devices after invoking + * subsystem-level @resume_noirq() for all of them. * * @freeze: Hibernation-specific, executed before creating a hibernation image. - * Quiesce operations so that a consistent image can be created, but do NOT - * otherwise put the device into a low power device state and do NOT emit - * system wakeup events. Save in main memory the device settings to be - * used by @restore() during the subsequent resume from hibernation or by - * the subsequent @thaw(), if the creation of the image or the restoration - * of main memory contents from it fails. + * Analogous to @suspend(), but it should not enable the device to signal + * wakeup events or change its power state. The majority of subsystems + * (with the notable exception of the PCI bus type) expect the driver-level + * @freeze() to save the device settings in memory to be used by @restore() + * during the subsequent resume from hibernation. + * Subsystem-level @freeze() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @thaw: Hibernation-specific, executed after creating a hibernation image OR - * if the creation of the image fails. Also executed after a failing + * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. * Undo the changes made by the preceding @freeze(), so the device can be * operated in the same way as immediately before the call to @freeze(). + * Subsystem-level @thaw() is executed for all devices after invoking + * subsystem-level @thaw_noirq() for all of them. It also may be executed + * directly after @freeze() in case of a transition error. * * @poweroff: Hibernation-specific, executed after saving a hibernation image. - * Quiesce the device, put it into a low power state appropriate for the - * upcoming system state (such as PCI_D3hot), and enable wakeup events as - * appropriate. + * Analogous to @suspend(), but it need not save the device's settings in + * memory. + * Subsystem-level @poweroff() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @restore: Hibernation-specific, executed after restoring the contents of main - * memory from a hibernation image. Driver starts working again, - * responding to hardware events and software requests. Drivers may NOT - * make ANY assumptions about the hardware state right prior to @restore(). - * On most platforms, there are no restrictions on availability of - * resources like clocks during @restore(). - * - * @suspend_noirq: Complete the operations of ->suspend() by carrying out any - * actions required for suspending the device that need interrupts to be - * disabled - * - * @resume_noirq: Prepare for the execution of ->resume() by carrying out any - * actions required for resuming the device that need interrupts to be - * disabled - * - * @freeze_noirq: Complete the operations of ->freeze() by carrying out any - * actions required for freezing the device that need interrupts to be - * disabled - * - * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any - * actions required for thawing the device that need interrupts to be - * disabled - * - * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any - * actions required for handling the device that need interrupts to be - * disabled - * - * @restore_noirq: Prepare for the execution of ->restore() by carrying out any - * actions required for restoring the operations of the device that need - * interrupts to be disabled + * memory from a hibernation image, analogous to @resume(). + * + * @suspend_noirq: Complete the actions started by @suspend(). Carry out any + * additional operations required for suspending the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @suspend_noirq() is being executed. + * It generally is expected that the device will be in a low-power state + * (appropriate for the target system sleep state) after subsystem-level + * @suspend_noirq() has returned successfully. If the device can generate + * system wakeup signals and is enabled to wake up the system, it should be + * configured to do so at that time. However, depending on the platform + * and device's subsystem, @suspend() may be allowed to put the device into + * the low-power state and configure it to generate wakeup signals, in + * which case it generally is not necessary to define @suspend_noirq(). + * + * @resume_noirq: Prepare for the execution of @resume() by carrying out any + * operations required for resuming the device that might be racing with + * its driver's interrupt handler, which is guaranteed not to run while + * @resume_noirq() is being executed. + * + * @freeze_noirq: Complete the actions started by @freeze(). Carry out any + * additional operations required for freezing the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @freeze_noirq() is being executed. + * The power state of the device should not be changed by either @freeze() + * or @freeze_noirq() and it should not be configured to signal system + * wakeup by any of these callbacks. + * + * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @thaw_noirq() is being executed. + * + * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to + * @suspend_noirq(), but it need not save the device's settings in memory. + * + * @restore_noirq: Prepare for the execution of @restore() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @restore_noirq() is being executed. Analogous to @resume_noirq(). * * All of the above callbacks, except for @complete(), return error codes. * However, the error codes returned by the resume operations, @resume(), - * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do + * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do * not cause the PM core to abort the resume transition during which they are - * returned. The error codes returned in that cases are only printed by the PM + * returned. The error codes returned in those cases are only printed by the PM * core to the system logs for debugging purposes. Still, it is recommended * that drivers only return error codes from their resume methods in case of an * unrecoverable failure (i.e. when the device being handled refuses to resume @@ -174,31 +201,43 @@ typedef struct pm_message { * their children. * * It is allowed to unregister devices while the above callbacks are being - * executed. However, it is not allowed to unregister a device from within any - * of its own callbacks. + * executed. However, a callback routine must NOT try to unregister the device + * it was called for, although it may unregister children of that device (for + * example, if it detects that a child was unplugged while the system was + * asleep). + * + * Refer to Documentation/power/devices.txt for more information about the role + * of the above callbacks in the system suspend process. * - * There also are the following callbacks related to run-time power management - * of devices: + * There also are callbacks related to runtime power management of devices. + * Again, these callbacks are executed by the PM core only for subsystems + * (PM domains, device types, classes and bus types) and the subsystem-level + * callbacks are supposed to invoke the driver callbacks. Moreover, the exact + * actions to be performed by a device driver's callbacks generally depend on + * the platform and subsystem the device belongs to. * * @runtime_suspend: Prepare the device for a condition in which it won't be * able to communicate with the CPU(s) and RAM due to power management. - * This need not mean that the device should be put into a low power state. + * This need not mean that the device should be put into a low-power state. * For example, if the device is behind a link which is about to be turned * off, the device may remain at full power. If the device does go to low - * power and is capable of generating run-time wake-up events, remote - * wake-up (i.e., a hardware mechanism allowing the device to request a - * change of its power state via a wake-up event, such as PCI PME) should - * be enabled for it. + * power and is capable of generating runtime wakeup events, remote wakeup + * (i.e., a hardware mechanism allowing the device to request a change of + * its power state via an interrupt) should be enabled for it. * * @runtime_resume: Put the device into the fully active state in response to a - * wake-up event generated by hardware or at the request of software. If - * necessary, put the device into the full power state and restore its + * wakeup event generated by hardware or at the request of software. If + * necessary, put the device into the full-power state and restore its * registers, so that it is fully operational. * - * @runtime_idle: Device appears to be inactive and it might be put into a low - * power state if all of the necessary conditions are satisfied. Check + * @runtime_idle: Device appears to be inactive and it might be put into a + * low-power state if all of the necessary conditions are satisfied. Check * these conditions and handle the device as appropriate, possibly queueing * a suspend request for it. The return value is ignored by the PM core. + * + * Refer to Documentation/power/runtime_pm.txt for more information about the + * role of the above callbacks in device runtime power management. + * */ struct dev_pm_ops { diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ea567321ae3c..2ca8cde5459d 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -35,10 +35,12 @@ struct pstore_info { spinlock_t buf_lock; /* serialize access to 'buf' */ char *buf; size_t bufsize; + struct mutex read_mutex; /* serialize open/read/close */ int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); int (*write)(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index a83833a1f7a2..07ceb97d53fa 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -35,7 +35,7 @@ struct shrinker { /* These are for internal use */ struct list_head list; - long nr; /* objs pending delete */ + atomic_long_t nr_in_batch; /* objs pending delete */ }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ extern void register_shrinker(struct shrinker *); diff --git a/include/linux/sigma.h b/include/linux/sigma.h index e2accb3164d8..d0de882c0d96 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -24,7 +24,7 @@ struct sigma_firmware { struct sigma_firmware_header { unsigned char magic[7]; u8 version; - u32 crc; + __le32 crc; }; enum { @@ -40,19 +40,14 @@ enum { struct sigma_action { u8 instr; u8 len_hi; - u16 len; - u16 addr; + __le16 len; + __be16 addr; unsigned char payload[]; }; static inline u32 sigma_action_len(struct sigma_action *sa) { - return (sa->len_hi << 16) | sa->len; -} - -static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len) -{ - return sizeof(*sa) + payload_len + (payload_len % 2); + return (sa->len_hi << 16) | le16_to_cpu(sa->len); } extern int process_sigma_firmware(struct i2c_client *client, const char *name); diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index add4790b21fe..e9e72bda1b72 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -85,6 +85,8 @@ * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again + * Device must not be reset from its vq/config callbacks, or in + * parallel with being added/removed. * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device * nvqs: the number of virtqueues to find diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h index 27c7edefbc86..5c7b6f0daef8 100644 --- a/include/linux/virtio_mmio.h +++ b/include/linux/virtio_mmio.h @@ -63,7 +63,7 @@ #define VIRTIO_MMIO_GUEST_FEATURES 0x020 /* Activated features set selector - Write Only */ -#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024 +#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 /* Guest's memory page size in bytes - Write Only */ #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index b1377b931eb7..5fb2c3d10c05 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -254,7 +254,7 @@ unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl, static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); return icd ? icd->vdev : NULL; } @@ -279,6 +279,11 @@ static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobu return container_of(vq, struct soc_camera_device, vb_vidq); } +static inline u32 soc_camera_grp_id(const struct soc_camera_device *icd) +{ + return (icd->iface << 8) | (icd->devnum + 1); +} + void soc_camera_lock(struct vb2_queue *vq); void soc_camera_unlock(struct vb2_queue *vq); diff --git a/include/net/dst.h b/include/net/dst.h index 4fb6c4381791..6faec1a60216 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -205,12 +205,7 @@ dst_feature(const struct dst_entry *dst, u32 feature) static inline u32 dst_mtu(const struct dst_entry *dst) { - u32 mtu = dst_metric_raw(dst, RTAX_MTU); - - if (!mtu) - mtu = dst->ops->default_mtu(dst); - - return mtu; + return dst->ops->mtu(dst); } /* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */ diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 9adb99845a56..e1c2ee0eef47 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -17,7 +17,7 @@ struct dst_ops { int (*gc)(struct dst_ops *ops); struct dst_entry * (*check)(struct dst_entry *, __u32 cookie); unsigned int (*default_advmss)(const struct dst_entry *); - unsigned int (*default_mtu)(const struct dst_entry *); + unsigned int (*mtu)(const struct dst_entry *); u32 * (*cow_metrics)(struct dst_entry *, unsigned long); void (*destroy)(struct dst_entry *); void (*ifdown)(struct dst_entry *, diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index b897d6e6d0a5..f941964a9931 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -31,6 +31,7 @@ /** struct ip_options - IP Options * * @faddr - Saved first hop address + * @nexthop - Saved nexthop address in LSRR and SSRR * @is_data - Options in __data, rather than skb * @is_strictroute - Strict source route * @srr_is_hit - Packet destination addr was our one @@ -41,6 +42,7 @@ */ struct ip_options { __be32 faddr; + __be32 nexthop; unsigned char optlen; unsigned char srr; unsigned char rr; diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index 78c83e62218f..e9ff3fc5e688 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -35,6 +35,7 @@ struct inet_peer { u32 metrics[RTAX_MAX]; u32 rate_tokens; /* rate limiting for ICMP */ + int redirect_genid; unsigned long rate_last; unsigned long pmtu_expires; u32 pmtu_orig; diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 4283508b3e18..a88fb6939387 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -67,18 +67,18 @@ struct nf_ct_event_notifier { int (*fcn)(unsigned int events, struct nf_ct_event *item); }; -extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; -extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); -extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); +extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb); extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_ecache *e; - if (nf_conntrack_event_cb == NULL) + if (net->ct.nf_conntrack_event_cb == NULL) return; e = nf_ct_ecache_find(ct); @@ -95,11 +95,12 @@ nf_conntrack_eventmask_report(unsigned int eventmask, int report) { int ret = 0; + struct net *net = nf_ct_net(ct); struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -164,9 +165,8 @@ struct nf_exp_event_notifier { int (*fcn)(unsigned int events, struct nf_exp_event *item); }; -extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb; -extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); -extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); +extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -174,11 +174,12 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { + struct net *net = nf_ct_exp_net(exp); struct nf_exp_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_expect_event_cb); + notify = rcu_dereference(net->ct.nf_expect_event_cb); if (notify == NULL) goto out_unlock; diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 0249399e51a7..7a911eca0f18 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -18,6 +18,8 @@ struct netns_ct { struct hlist_nulls_head unconfirmed; struct hlist_nulls_head dying; struct ip_conntrack_stat __percpu *stat; + struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; + struct nf_exp_event_notifier __rcu *nf_expect_event_cb; int sysctl_events; unsigned int sysctl_events_retry_timeout; int sysctl_acct; diff --git a/include/net/red.h b/include/net/red.h index 3319f16b3beb..b72a3b833936 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -116,7 +116,7 @@ struct red_parms { u32 qR; /* Cached random number */ unsigned long qavg; /* Average queue length: A scaled */ - psched_time_t qidlestart; /* Start of current idle period */ + ktime_t qidlestart; /* Start of current idle period */ }; static inline u32 red_rmask(u8 Plog) @@ -148,17 +148,17 @@ static inline void red_set_parms(struct red_parms *p, static inline int red_is_idling(struct red_parms *p) { - return p->qidlestart != PSCHED_PASTPERFECT; + return p->qidlestart.tv64 != 0; } static inline void red_start_of_idle_period(struct red_parms *p) { - p->qidlestart = psched_get_time(); + p->qidlestart = ktime_get(); } static inline void red_end_of_idle_period(struct red_parms *p) { - p->qidlestart = PSCHED_PASTPERFECT; + p->qidlestart.tv64 = 0; } static inline void red_restart(struct red_parms *p) @@ -170,13 +170,10 @@ static inline void red_restart(struct red_parms *p) static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p) { - psched_time_t now; - long us_idle; + s64 delta = ktime_us_delta(ktime_get(), p->qidlestart); + long us_idle = min_t(s64, delta, p->Scell_max); int shift; - now = psched_get_time(); - us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max); - /* * The problem: ideally, average length queue recalcultion should * be done over constant clock intervals. This is too expensive, so diff --git a/include/net/route.h b/include/net/route.h index db7b3432f07c..91855d185b53 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -71,12 +71,12 @@ struct rtable { struct fib_info *fi; /* for client ref to shared metrics */ }; -static inline bool rt_is_input_route(struct rtable *rt) +static inline bool rt_is_input_route(const struct rtable *rt) { return rt->rt_route_iif != 0; } -static inline bool rt_is_output_route(struct rtable *rt) +static inline bool rt_is_output_route(const struct rtable *rt) { return rt->rt_route_iif == 0; } diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index d1e95c6ac776..5a35a2a2d3c5 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -147,6 +147,7 @@ struct fcoe_ctlr { u8 map_dest; u8 spma; u8 probe_tries; + u8 priority; u8 dest_addr[ETH_ALEN]; u8 ctl_src_addr[ETH_ALEN]; @@ -301,6 +302,7 @@ struct fcoe_percpu_s { * @lport: The associated local port * @fcoe_pending_queue: The pending Rx queue of skbs * @fcoe_pending_queue_active: Indicates if the pending queue is active + * @priority: Packet priority (DCB) * @max_queue_depth: Max queue depth of pending queue * @min_queue_depth: Min queue depth of pending queue * @timer: The queue timer @@ -316,6 +318,7 @@ struct fcoe_port { struct fc_lport *lport; struct sk_buff_head fcoe_pending_queue; u8 fcoe_pending_queue_active; + u8 priority; u32 max_queue_depth; u32 min_queue_depth; struct timer_list timer; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 7f5fed3c89e1..6873c7dd9145 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,9 +103,10 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, - SCF_SE_CMD_FAILED = 0x00000400, + SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, + SCF_BIDI = 0x00002000, SCF_SENT_CHECK_CONDITION = 0x00004000, SCF_OVERFLOW_BIT = 0x00008000, SCF_UNDERFLOW_BIT = 0x00010000, @@ -154,6 +155,7 @@ enum tcm_sense_reason_table { TCM_CHECK_CONDITION_ABORT_CMD = 0x0d, TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e, TCM_CHECK_CONDITION_NOT_READY = 0x0f, + TCM_RESERVATION_CONFLICT = 0x10, }; struct se_obj { @@ -211,7 +213,6 @@ struct t10_alua_lu_gp { u16 lu_gp_id; int lu_gp_valid_id; u32 lu_gp_members; - atomic_t lu_gp_shutdown; atomic_t lu_gp_ref_cnt; spinlock_t lu_gp_lock; struct config_group lu_gp_group; @@ -422,11 +423,9 @@ struct se_cmd { int sam_task_attr; /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; - /* Transport specific error status */ - int transport_error_status; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ - int check_release:1; - int cmd_wait_set:1; + unsigned check_release:1; + unsigned cmd_wait_set:1; /* See se_cmd_flags_table */ u32 se_cmd_flags; u32 se_ordered_id; @@ -441,13 +440,10 @@ struct se_cmd { /* Used for sense data */ void *sense_buffer; struct list_head se_delayed_node; - struct list_head se_ordered_node; struct list_head se_lun_node; struct list_head se_qf_node; struct se_device *se_dev; struct se_dev_entry *se_deve; - struct se_device *se_obj_ptr; - struct se_device *se_orig_obj_ptr; struct se_lun *se_lun; /* Only used for internal passthrough and legacy TCM fabric modules */ struct se_session *se_sess; @@ -463,8 +459,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - int t_tasks_fua; - bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; atomic_t t_se_count; @@ -489,14 +483,6 @@ struct se_cmd { struct work_struct work; - /* - * Used for pre-registered fabric SGL passthrough WRITE and READ - * with the special SCF_PASSTHROUGH_CONTIG_TO_SG case for TCM_Loop - * and other HW target mode fabric modules. - */ - struct scatterlist *t_task_pt_sgl; - u32 t_task_pt_sgl_num; - struct scatterlist *t_data_sg; unsigned int t_data_nents; struct scatterlist *t_bidi_data_sg; @@ -562,7 +548,7 @@ struct se_node_acl { } ____cacheline_aligned; struct se_session { - int sess_tearing_down:1; + unsigned sess_tearing_down:1; u64 sess_bin_isid; struct se_node_acl *se_node_acl; struct se_portal_group *se_tpg; @@ -683,7 +669,6 @@ struct se_subsystem_dev { struct t10_reservation t10_pr; spinlock_t se_dev_lock; void *se_dev_su_ptr; - struct list_head se_dev_node; struct config_group se_dev_group; /* For T10 Reservations */ struct config_group se_dev_pr_group; @@ -692,9 +677,6 @@ struct se_subsystem_dev { } ____cacheline_aligned; struct se_device { - /* Set to 1 if thread is NOT sleeping on thread_sem */ - u8 thread_active; - u8 dev_status_timer_flags; /* RELATIVE TARGET PORT IDENTIFER Counter */ u16 dev_rpti_counter; /* Used for SAM Task Attribute ordering */ @@ -719,14 +701,10 @@ struct se_device { u64 write_bytes; spinlock_t stats_lock; /* Active commands on this virtual SE device */ - atomic_t active_cmds; atomic_t simple_cmds; atomic_t depth_left; atomic_t dev_ordered_id; - atomic_t dev_tur_active; atomic_t execute_tasks; - atomic_t dev_status_thr_count; - atomic_t dev_hoq_count; atomic_t dev_ordered_sync; atomic_t dev_qf_count; struct se_obj dev_obj; @@ -734,14 +712,9 @@ struct se_device { struct se_obj dev_export_obj; struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; - spinlock_t ordered_cmd_lock; spinlock_t execute_task_lock; - spinlock_t state_task_lock; - spinlock_t dev_alua_lock; spinlock_t dev_reservation_lock; - spinlock_t dev_state_lock; spinlock_t dev_status_lock; - spinlock_t dev_status_thr_lock; spinlock_t se_port_lock; spinlock_t se_tmr_lock; spinlock_t qf_cmd_lock; @@ -753,14 +726,10 @@ struct se_device { struct t10_pr_registration *dev_pr_res_holder; struct list_head dev_sep_list; struct list_head dev_tmr_list; - struct timer_list dev_status_timer; /* Pointer to descriptor for processing thread */ struct task_struct *process_thread; - pid_t process_thread_pid; - struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; - struct list_head ordered_cmd_list; struct list_head execute_task_list; struct list_head state_task_list; struct list_head qf_cmd_list; @@ -771,8 +740,6 @@ struct se_device { struct se_subsystem_api *transport; /* Linked list for struct se_hba struct se_device list */ struct list_head dev_list; - /* Linked list for struct se_global->g_se_dev_list */ - struct list_head g_se_dev_list; } ____cacheline_aligned; struct se_hba { @@ -834,7 +801,6 @@ struct se_port { u32 sep_index; struct scsi_port_stats sep_stats; /* Used for ALUA Target Port Groups membership */ - atomic_t sep_tg_pt_gp_active; atomic_t sep_tg_pt_secondary_offline; /* Used for PR ALL_TG_PT=1 */ atomic_t sep_tg_pt_ref_cnt; diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index c16e9431dd01..dac4f2d859fd 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -10,29 +10,6 @@ #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */ -#define PYX_TRANSPORT_SENT_TO_TRANSPORT 0 -#define PYX_TRANSPORT_WRITE_PENDING 1 - -#define PYX_TRANSPORT_UNKNOWN_SAM_OPCODE -1 -#define PYX_TRANSPORT_HBA_QUEUE_FULL -2 -#define PYX_TRANSPORT_REQ_TOO_MANY_SECTORS -3 -#define PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES -4 -#define PYX_TRANSPORT_INVALID_CDB_FIELD -5 -#define PYX_TRANSPORT_INVALID_PARAMETER_LIST -6 -#define PYX_TRANSPORT_LU_COMM_FAILURE -7 -#define PYX_TRANSPORT_UNKNOWN_MODE_PAGE -8 -#define PYX_TRANSPORT_WRITE_PROTECTED -9 -#define PYX_TRANSPORT_RESERVATION_CONFLICT -10 -#define PYX_TRANSPORT_ILLEGAL_REQUEST -11 -#define PYX_TRANSPORT_USE_SENSE_REASON -12 - -#ifndef SAM_STAT_RESERVATION_CONFLICT -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#endif - -#define TRANSPORT_PLUGIN_FREE 0 -#define TRANSPORT_PLUGIN_REGISTERED 1 - #define TRANSPORT_PLUGIN_PHBA_PDEV 1 #define TRANSPORT_PLUGIN_VHBA_PDEV 2 #define TRANSPORT_PLUGIN_VHBA_VDEV 3 @@ -158,7 +135,6 @@ extern int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); extern int transport_handle_cdb_direct(struct se_cmd *); extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); -extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); extern bool target_stop_task(struct se_task *task, unsigned long *flags); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, diff --git a/include/video/omapdss.h b/include/video/omapdss.h index b66ebb2032c6..378c7ed6760b 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -307,15 +307,8 @@ struct omap_dss_board_info { void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask); }; -#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) /* Init with the board info */ extern int omap_display_init(struct omap_dss_board_info *board_data); -#else -static inline int omap_display_init(struct omap_dss_board_info *board_data) -{ - return 0; -} -#endif struct omap_display_platform_data { struct omap_dss_board_info *board_data; diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h index f0b6890370be..f6f07aa35af5 100644 --- a/include/xen/interface/io/xs_wire.h +++ b/include/xen/interface/io/xs_wire.h @@ -29,8 +29,7 @@ enum xsd_sockmsg_type XS_IS_DOMAIN_INTRODUCED, XS_RESUME, XS_SET_TARGET, - XS_RESTRICT, - XS_RESET_WATCHES + XS_RESTRICT }; #define XS_WRITE_NONE "NONE" |