diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/bcd.h | 17 | ||||
| -rw-r--r-- | include/linux/fsl_devices.h | 2 | ||||
| -rw-r--r-- | include/linux/usb.h | 32 | ||||
| -rw-r--r-- | include/linux/usb/ch11.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 97 | ||||
| -rw-r--r-- | include/linux/usb/ehci_def.h | 35 | ||||
| -rw-r--r-- | include/linux/usb/ehci_pdriver.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/ezusb.h | 16 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 33 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/nop-usb-xceiv.h | 24 | ||||
| -rw-r--r-- | include/linux/usb/ohci_pdriver.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/omap_usb.h | 46 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 236 | ||||
| -rw-r--r-- | include/linux/usb/phy.h | 233 | ||||
| -rw-r--r-- | include/linux/usb/phy_companion.h | 34 | ||||
| -rw-r--r-- | include/linux/usb/quirks.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 32 | ||||
| -rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 80 | ||||
| -rw-r--r-- | include/linux/usb_usual.h | 24 | ||||
| -rw-r--r-- | include/linux/usbdevice_fs.h | 14 | ||||
| -rw-r--r-- | include/xen/interface/physdev.h | 16 |
22 files changed, 652 insertions, 347 deletions
diff --git a/include/linux/bcd.h b/include/linux/bcd.h index 22ea563ba3eb..18fff11fb3ea 100644 --- a/include/linux/bcd.h +++ b/include/linux/bcd.h @@ -3,7 +3,20 @@ #include <linux/compiler.h> -unsigned bcd2bin(unsigned char val) __attribute_const__; -unsigned char bin2bcd(unsigned val) __attribute_const__; +#define bcd2bin(x) \ + (__builtin_constant_p((u8 )(x)) ? \ + const_bcd2bin(x) : \ + _bcd2bin(x)) + +#define bin2bcd(x) \ + (__builtin_constant_p((u8 )(x)) ? \ + const_bin2bcd(x) : \ + _bin2bcd(x)) + +#define const_bcd2bin(x) (((x) & 0x0f) + ((x) >> 4) * 10) +#define const_bin2bcd(x) ((((x) / 10) << 4) + (x) % 10) + +unsigned _bcd2bin(unsigned char val) __attribute_const__; +unsigned char _bin2bcd(unsigned val) __attribute_const__; #endif /* _BCD_H */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 15be561e7397..a82296af413f 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -19,9 +19,11 @@ #define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI PHY CLK to become stable - 10ms*/ +#define FSL_USB_PHY_CLK_TIMEOUT 10000 /* uSec */ #define FSL_USB_VER_OLD 0 #define FSL_USB_VER_1_6 1 #define FSL_USB_VER_2_2 2 +#define FSL_USB_VER_2_4 3 #include <linux/types.h> diff --git a/include/linux/usb.h b/include/linux/usb.h index 30d1ae38eab1..07915a32fb9d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -384,6 +384,13 @@ enum usb_device_removable { USB_DEVICE_FIXED, }; +enum usb_port_connect_type { + USB_PORT_CONNECT_TYPE_UNKNOWN = 0, + USB_PORT_CONNECT_TYPE_HOT_PLUG, + USB_PORT_CONNECT_TYPE_HARD_WIRED, + USB_PORT_NOT_USED, +}; + /* * USB 3.0 Link Power Management (LPM) parameters. * @@ -469,7 +476,6 @@ struct usb3_lpm_parameters { * access from userspace * @usbfs_dentry: usbfs dentry entry for the device * @maxchild: number of ports if hub - * @children: child devices - USB devices that are attached to this hub * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended @@ -543,7 +549,6 @@ struct usb_device { struct list_head filelist; int maxchild; - struct usb_device **children; u32 quirks; atomic_t urbnum; @@ -572,6 +577,19 @@ static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf) extern struct usb_device *usb_get_dev(struct usb_device *dev); extern void usb_put_dev(struct usb_device *dev); +extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1); + +/** + * usb_hub_for_each_child - iterate over all child devices on the hub + * @hdev: USB device belonging to the usb hub + * @port1: portnum associated with child device + * @child: child device pointer + */ +#define usb_hub_for_each_child(hdev, port1, child) \ + for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) /* USB device locking */ #define usb_lock_device(udev) device_lock(&(udev)->dev) @@ -584,6 +602,16 @@ extern int usb_lock_device_for_reset(struct usb_device *udev, extern int usb_reset_device(struct usb_device *dev); extern void usb_queue_reset_device(struct usb_interface *dev); +#ifdef CONFIG_ACPI +extern int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable); +extern bool usb_acpi_power_manageable(struct usb_device *hdev, int index); +#else +static inline int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable) { return 0; } +static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) + { return true; } +#endif /* USB autosuspend and autoresume */ #ifdef CONFIG_USB_SUSPEND diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index b6c2863b2c94..7692dc69ccf7 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -236,8 +236,8 @@ struct usb_hub_descriptor { struct { __u8 bHubHdrDecLat; - __u16 wHubDelay; - __u16 DeviceRemovable; + __le16 wHubDelay; + __le16 DeviceRemovable; } __attribute__ ((packed)) ss; } u; } __attribute__ ((packed)); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 9d8c3b634493..f8dda0621800 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -34,6 +34,8 @@ * the composite model the host can use both functions at the same time. */ +#include <linux/bcd.h> +#include <linux/version.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -46,6 +48,9 @@ */ #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ +/* big enough to hold our biggest descriptor */ +#define USB_COMP_EP0_BUFSIZ 1024 + struct usb_configuration; /** @@ -245,24 +250,31 @@ int usb_add_config(struct usb_composite_dev *, void usb_remove_config(struct usb_composite_dev *, struct usb_configuration *); +/* predefined index for usb_composite_driver */ +enum { + USB_GADGET_MANUFACTURER_IDX = 0, + USB_GADGET_PRODUCT_IDX, + USB_GADGET_SERIAL_IDX, + USB_GADGET_FIRST_AVAIL_IDX, +}; + /** * struct usb_composite_driver - groups configurations into a gadget * @name: For diagnostics, identifies the driver. - * @iProduct: Used as iProduct override if @dev->iProduct is not set. - * If NULL value of @name is taken. - * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is - * not set. If NULL a default "<system> <release> with <udc>" value - * will be used. - * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is - * not set. * @dev: Template descriptor for the device, including default device * identifiers. - * @strings: tables of strings, keyed by identifiers assigned during bind() - * and language IDs provided in control requests + * @strings: tables of strings, keyed by identifiers assigned during @bind + * and language IDs provided in control requests. Note: The first entries + * are predefined. The first entry that may be used is + * USB_GADGET_FIRST_AVAIL_IDX * @max_speed: Highest speed the driver supports. * @needs_serial: set to 1 if the gadget needs userspace to provide * a serial number. If one is not provided, warning will be printed. - * @unbind: Reverses bind; called as a side effect of unregistering + * @bind: (REQUIRED) Used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind; called as a side effect of unregistering * this driver. * @disconnect: optional driver disconnect method * @suspend: Notifies when the host stops sending USB traffic, @@ -271,9 +283,9 @@ void usb_remove_config(struct usb_composite_dev *, * before function notifications * * Devices default to reporting self powered operation. Devices which rely - * on bus powered operation should report this in their @bind() method. + * on bus powered operation should report this in their @bind method. * - * Before returning from bind, various fields in the template descriptor + * Before returning from @bind, various fields in the template descriptor * may be overridden. These include the idVendor/idProduct/bcdDevice values * normally to bind the appropriate host side driver, and the three strings * (iManufacturer, iProduct, iSerialNumber) normally used to provide user @@ -283,14 +295,12 @@ void usb_remove_config(struct usb_composite_dev *, */ struct usb_composite_driver { const char *name; - const char *iProduct; - const char *iManufacturer; - const char *iSerialNumber; const struct usb_device_descriptor *dev; struct usb_gadget_strings **strings; enum usb_device_speed max_speed; unsigned needs_serial:1; + int (*bind)(struct usb_composite_dev *cdev); int (*unbind)(struct usb_composite_dev *); void (*disconnect)(struct usb_composite_dev *); @@ -298,10 +308,10 @@ struct usb_composite_driver { /* global suspend hooks */ void (*suspend)(struct usb_composite_dev *); void (*resume)(struct usb_composite_dev *); + struct usb_gadget_driver gadget_driver; }; -extern int usb_composite_probe(struct usb_composite_driver *driver, - int (*bind)(struct usb_composite_dev *cdev)); +extern int usb_composite_probe(struct usb_composite_driver *driver); extern void usb_composite_unregister(struct usb_composite_driver *driver); extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); @@ -310,7 +320,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); * struct usb_composite_device - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated - * @bufsiz: size of buffer pre-allocated in @req * @config: the currently active configuration * * One of these devices is allocated and initialized before the @@ -341,7 +350,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); struct usb_composite_dev { struct usb_gadget *gadget; struct usb_request *req; - unsigned bufsiz; struct usb_configuration *config; @@ -352,9 +360,7 @@ struct usb_composite_dev { struct list_head configs; struct usb_composite_driver *driver; u8 next_string_id; - u8 manufacturer_override; - u8 product_override; - u8 serial_override; + char *def_manufacturer; /* the gadget driver won't enable the data pullup * while the deactivation count is nonzero. @@ -375,6 +381,53 @@ extern int usb_string_ids_tab(struct usb_composite_dev *c, struct usb_string *str); extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); +/* + * Some systems will need runtime overrides for the product identifiers + * published in the device descriptor, either numbers or strings or both. + * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). + */ +struct usb_composite_overwrite { + u16 idVendor; + u16 idProduct; + u16 bcdDevice; + char *serial_number; + char *manufacturer; + char *product; +}; +#define USB_GADGET_COMPOSITE_OPTIONS() \ + static struct usb_composite_overwrite coverwrite; \ + \ + module_param_named(idVendor, coverwrite.idVendor, ushort, S_IRUGO); \ + MODULE_PARM_DESC(idVendor, "USB Vendor ID"); \ + \ + module_param_named(idProduct, coverwrite.idProduct, ushort, S_IRUGO); \ + MODULE_PARM_DESC(idProduct, "USB Product ID"); \ + \ + module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \ + MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); \ + \ + module_param_named(iSerialNumber, coverwrite.serial_number, charp, \ + S_IRUGO); \ + MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); \ + \ + module_param_named(iManufacturer, coverwrite.manufacturer, charp, \ + S_IRUGO); \ + MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); \ + \ + module_param_named(iProduct, coverwrite.product, charp, S_IRUGO); \ + MODULE_PARM_DESC(iProduct, "USB Product string") + +void usb_composite_overwrite_options(struct usb_composite_dev *cdev, + struct usb_composite_overwrite *covr); + +static inline u16 get_default_bcdDevice(void) +{ + u16 bcdDevice; + + bcdDevice = bin2bcd((LINUX_VERSION_CODE >> 16 & 0xff)) << 8; + bcdDevice |= bin2bcd((LINUX_VERSION_CODE >> 8 & 0xff)); + return bcdDevice; +} /* messaging utils */ #define DBG(d, fmt, args...) \ diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index de4b9ed5d5dd..daec99af5d54 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -171,18 +171,18 @@ struct ehci_regs { #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ - u32 reserved4[7]; + u32 reserved4[6]; /* Moorestown has some non-standard registers, partially due to the fact that * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ /* HOSTPC: offset 0x84 */ - u32 hostpc[0]; /* HOSTPC extension */ + u32 hostpc[1]; /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ - u32 reserved5[17]; + u32 reserved5[16]; /* USBMODE_EX: offset 0xc8 */ u32 usbmode_ex; /* USB Device mode extension */ @@ -221,18 +221,35 @@ extern int __init early_dbgp_init(char *s); extern struct console early_dbgp_console; #endif /* CONFIG_EARLY_PRINTK_DBGP */ +struct usb_hcd; + +#ifdef CONFIG_XEN_DOM0 +extern int xen_dbgp_reset_prep(struct usb_hcd *); +extern int xen_dbgp_external_startup(struct usb_hcd *); +#else +static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return 1; /* Shouldn't this be 0? */ +} + +static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return -1; +} +#endif + #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ -extern int dbgp_external_startup(void); -extern int dbgp_reset_prep(void); +extern int dbgp_external_startup(struct usb_hcd *); +extern int dbgp_reset_prep(struct usb_hcd *hcd); #else -static inline int dbgp_reset_prep(void) +static inline int dbgp_reset_prep(struct usb_hcd *hcd) { - return 1; + return xen_dbgp_reset_prep(hcd); } -static inline int dbgp_external_startup(void) +static inline int dbgp_external_startup(struct usb_hcd *hcd) { - return -1; + return xen_dbgp_external_startup(hcd); } #endif diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index 1894f42fe3f7..c9d09f8b7ff2 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -41,6 +41,14 @@ struct usb_ehci_pdata { unsigned big_endian_mmio:1; unsigned port_power_on:1; unsigned port_power_off:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); + /* Turn off all power and clocks */ + void (*power_off)(struct platform_device *pdev); + /* Turn on only VBUS suspend power and hotplug detection, + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); }; #endif /* __USB_CORE_EHCI_PDRIVER_H */ diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h new file mode 100644 index 000000000000..fc618d8d1e92 --- /dev/null +++ b/include/linux/usb/ezusb.h @@ -0,0 +1,16 @@ +#ifndef __EZUSB_H +#define __EZUSB_H + + +extern int ezusb_writememory(struct usb_device *dev, int address, + unsigned char *data, int length, __u8 bRequest); + +extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit); +extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit); + +extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path); +extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path); + +#endif /* __EZUSB_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 9517466ababb..5b6e50888248 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -474,7 +474,8 @@ struct usb_gadget_ops { /* Those two are deprecated */ int (*start)(struct usb_gadget_driver *, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, + struct usb_gadget_driver *driver)); int (*stop)(struct usb_gadget_driver *); }; @@ -502,6 +503,8 @@ struct usb_gadget_ops { * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. * @dev: Driver model state for this abstract device. + * @out_epnum: last used out ep number + * @in_epnum: last used in ep number * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -536,6 +539,8 @@ struct usb_gadget { unsigned a_alt_hnp_support:1; const char *name; struct device dev; + unsigned out_epnum; + unsigned in_epnum; }; static inline void set_gadget_data(struct usb_gadget *gadget, void *data) @@ -558,14 +563,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) */ static inline int gadget_is_dualspeed(struct usb_gadget *g) { -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->max_speed" ... that might be - * useful to work around hardware bugs, but is mostly pointless - */ - return 1; -#else - return 0; -#endif + return g->max_speed >= USB_SPEED_HIGH; } /** @@ -575,15 +573,7 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -#ifdef CONFIG_USB_GADGET_SUPERSPEED - /* - * runtime test would check "g->max_speed" ... that might be - * useful to work around hardware bugs, but is mostly pointless - */ - return 1; -#else - return 0; -#endif + return g->max_speed >= USB_SPEED_SUPER; } /** @@ -781,6 +771,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) * when the host is disconnected. May be called in_interrupt; this * may not sleep. Some devices can't detect disconnect, so this might * not be called except as part of controller shutdown. + * @bind: the driver's bind callback * @unbind: Invoked when the driver is unbound from a gadget, * usually from rmmod (after a disconnect is reported). * Called in a context that permits sleeping. @@ -835,6 +826,8 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) struct usb_gadget_driver { char *function; enum usb_device_speed max_speed; + int (*bind)(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); @@ -860,7 +853,6 @@ struct usb_gadget_driver { /** * usb_gadget_probe_driver - probe a gadget driver * @driver: the driver being registered - * @bind: the driver's bind callback * Context: can sleep * * Call this in your gadget driver's module initialization function, @@ -869,8 +861,7 @@ struct usb_gadget_driver { * registration call returns. It's expected that the @bind() function will * be in init sections. */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); +int usb_gadget_probe_driver(struct usb_gadget_driver *driver); /** * usb_gadget_unregister_driver - unregister a gadget driver diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index c5fdb148fc02..608050b2545f 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -135,8 +135,8 @@ struct usb_hcd { unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ - u64 rsrc_start; /* memory/io resource start */ - u64 rsrc_len; /* memory/io resource length */ + resource_size_t rsrc_start; /* memory/io resource start */ + resource_size_t rsrc_len; /* memory/io resource length */ unsigned power_budget; /* in mA, 0 = no limit */ /* bandwidth_mutex should be taken before adding or removing diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h new file mode 100644 index 000000000000..28884c717411 --- /dev/null +++ b/include/linux/usb/nop-usb-xceiv.h @@ -0,0 +1,24 @@ +#ifndef __LINUX_USB_NOP_XCEIV_H +#define __LINUX_USB_NOP_XCEIV_H + +#include <linux/usb/otg.h> + +struct nop_usb_xceiv_platform_data { + enum usb_phy_type type; +}; + +#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) +/* sometimes transceivers are accessed only through e.g. ULPI */ +extern void usb_nop_xceiv_register(void); +extern void usb_nop_xceiv_unregister(void); +#else +static inline void usb_nop_xceiv_register(void) +{ +} + +static inline void usb_nop_xceiv_unregister(void) +{ +} +#endif + +#endif /* __LINUX_USB_NOP_XCEIV_H */ diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h index 2808f2a9cce8..74e7755168b7 100644 --- a/include/linux/usb/ohci_pdriver.h +++ b/include/linux/usb/ohci_pdriver.h @@ -33,6 +33,14 @@ struct usb_ohci_pdata { unsigned big_endian_desc:1; unsigned big_endian_mmio:1; unsigned no_big_frame_no:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); + /* Turn off all power and clocks */ + void (*power_off)(struct platform_device *pdev); + /* Turn on only VBUS suspend power and hotplug detection, + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); }; #endif /* __USB_CORE_OHCI_PDRIVER_H */ diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h new file mode 100644 index 000000000000..0ea17f8ae820 --- /dev/null +++ b/include/linux/usb/omap_usb.h @@ -0,0 +1,46 @@ +/* + * omap_usb.h -- omap usb2 phy header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_USB2_H +#define __DRIVERS_OMAP_USB2_H + +#include <linux/usb/otg.h> + +struct omap_usb { + struct usb_phy phy; + struct phy_companion *comparator; + struct device *dev; + u32 __iomem *control_dev; + struct clk *wkupclk; + u8 is_suspended:1; +}; + +#define PHY_PD 0x1 + +#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) + +#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) +extern int omap_usb2_set_comparator(struct phy_companion *comparator); +#else +static inline int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + return -ENODEV; +} +#endif + +#endif /* __DRIVERS_OMAP_USB_H */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 45824be0a2f9..e8a5fe87c6bd 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -9,56 +9,7 @@ #ifndef __LINUX_USB_OTG_H #define __LINUX_USB_OTG_H -#include <linux/notifier.h> - -/* OTG defines lots of enumeration states before device reset */ -enum usb_otg_state { - OTG_STATE_UNDEFINED = 0, - - /* single-role peripheral, and dual-role default-b */ - OTG_STATE_B_IDLE, - OTG_STATE_B_SRP_INIT, - OTG_STATE_B_PERIPHERAL, - - /* extra dual-role default-b states */ - OTG_STATE_B_WAIT_ACON, - OTG_STATE_B_HOST, - - /* dual-role default-a */ - OTG_STATE_A_IDLE, - OTG_STATE_A_WAIT_VRISE, - OTG_STATE_A_WAIT_BCON, - OTG_STATE_A_HOST, - OTG_STATE_A_SUSPEND, - OTG_STATE_A_PERIPHERAL, - OTG_STATE_A_WAIT_VFALL, - OTG_STATE_A_VBUS_ERR, -}; - -enum usb_phy_events { - USB_EVENT_NONE, /* no events or cable disconnected */ - USB_EVENT_VBUS, /* vbus valid event */ - USB_EVENT_ID, /* id was grounded */ - USB_EVENT_CHARGER, /* usb dedicated charger */ - USB_EVENT_ENUMERATED, /* gadget driver enumerated */ -}; - -/* associate a type with PHY */ -enum usb_phy_type { - USB_PHY_TYPE_UNDEFINED, - USB_PHY_TYPE_USB2, - USB_PHY_TYPE_USB3, -}; - -struct usb_phy; - -/* for transceivers connected thru an ULPI interface, the user must - * provide access ops - */ -struct usb_phy_io_ops { - int (*read)(struct usb_phy *x, u32 reg); - int (*write)(struct usb_phy *x, u32 val, u32 reg); -}; +#include <linux/usb/phy.h> struct usb_otg { u8 default_a; @@ -85,134 +36,9 @@ struct usb_otg { }; -/* - * the otg driver needs to interact with both device side and host side - * usb controllers. it decides which controller is active at a given - * moment, using the transceiver, ID signal, HNP and sometimes static - * configuration information (including "board isn't wired for otg"). - */ -struct usb_phy { - struct device *dev; - const char *label; - unsigned int flags; - - enum usb_phy_type type; - enum usb_otg_state state; - enum usb_phy_events last_event; - - struct usb_otg *otg; - - struct device *io_dev; - struct usb_phy_io_ops *io_ops; - void __iomem *io_priv; - - /* for notification of usb_phy_events */ - struct atomic_notifier_head notifier; - - /* to pass extra port status to the root hub */ - u16 port_status; - u16 port_change; - - /* to support controllers that have multiple transceivers */ - struct list_head head; - - /* initialize/shutdown the OTG controller */ - int (*init)(struct usb_phy *x); - void (*shutdown)(struct usb_phy *x); - - /* effective for B devices, ignored for A-peripheral */ - int (*set_power)(struct usb_phy *x, - unsigned mA); - - /* for non-OTG B devices: set transceiver into suspend mode */ - int (*set_suspend)(struct usb_phy *x, - int suspend); - - /* notify phy connect status change */ - int (*notify_connect)(struct usb_phy *x, int port); - int (*notify_disconnect)(struct usb_phy *x, int port); -}; - - -/* for board-specific init logic */ -extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); -extern void usb_remove_phy(struct usb_phy *); - -#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) -/* sometimes transceivers are accessed only through e.g. ULPI */ -extern void usb_nop_xceiv_register(void); -extern void usb_nop_xceiv_unregister(void); -#else -static inline void usb_nop_xceiv_register(void) -{ -} - -static inline void usb_nop_xceiv_unregister(void) -{ -} -#endif - -/* helpers for direct access thru low-level io interface */ -static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) -{ - if (x->io_ops && x->io_ops->read) - return x->io_ops->read(x, reg); - - return -EINVAL; -} - -static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) -{ - if (x->io_ops && x->io_ops->write) - return x->io_ops->write(x, val, reg); - - return -EINVAL; -} - -static inline int -usb_phy_init(struct usb_phy *x) -{ - if (x->init) - return x->init(x); - - return 0; -} - -static inline void -usb_phy_shutdown(struct usb_phy *x) -{ - if (x->shutdown) - x->shutdown(x); -} - -/* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_phy(enum usb_phy_type type); -extern struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type); -extern void usb_put_phy(struct usb_phy *); -extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) -{ - return NULL; -} - -static inline struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type) -{ - return NULL; -} - -static inline void usb_put_phy(struct usb_phy *x) -{ -} - -static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) -{ -} - static inline const char *otg_state_string(enum usb_otg_state state) { return NULL; @@ -262,42 +88,6 @@ otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph) } static inline int -usb_phy_set_power(struct usb_phy *x, unsigned mA) -{ - if (x && x->set_power) - return x->set_power(x, mA); - return 0; -} - -/* Context: can sleep */ -static inline int -usb_phy_set_suspend(struct usb_phy *x, int suspend) -{ - if (x->set_suspend != NULL) - return x->set_suspend(x, suspend); - else - return 0; -} - -static inline int -usb_phy_notify_connect(struct usb_phy *x, int port) -{ - if (x->notify_connect) - return x->notify_connect(x, port); - else - return 0; -} - -static inline int -usb_phy_notify_disconnect(struct usb_phy *x, int port) -{ - if (x->notify_disconnect) - return x->notify_disconnect(x, port); - else - return 0; -} - -static inline int otg_start_srp(struct usb_otg *otg) { if (otg && otg->start_srp) @@ -306,31 +96,7 @@ otg_start_srp(struct usb_otg *otg) return -ENOTSUPP; } -/* notifiers */ -static inline int -usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - return atomic_notifier_chain_register(&x->notifier, nb); -} - -static inline void -usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - atomic_notifier_chain_unregister(&x->notifier, nb); -} - /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); -static inline const char *usb_phy_type_string(enum usb_phy_type type) -{ - switch (type) { - case USB_PHY_TYPE_USB2: - return "USB2 PHY"; - case USB_PHY_TYPE_USB3: - return "USB3 PHY"; - default: - return "UNKNOWN PHY TYPE"; - } -} #endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h new file mode 100644 index 000000000000..06b5bae35b29 --- /dev/null +++ b/include/linux/usb/phy.h @@ -0,0 +1,233 @@ +/* USB OTG (On The Go) defines */ +/* + * + * These APIs may be used between USB controllers. USB device drivers + * (for either host or peripheral roles) don't use these calls; they + * continue to use just usb_device and usb_gadget. + */ + +#ifndef __LINUX_USB_PHY_H +#define __LINUX_USB_PHY_H + +#include <linux/notifier.h> + +enum usb_phy_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + +/* OTG defines lots of enumeration states before device reset */ +enum usb_otg_state { + OTG_STATE_UNDEFINED = 0, + + /* single-role peripheral, and dual-role default-b */ + OTG_STATE_B_IDLE, + OTG_STATE_B_SRP_INIT, + OTG_STATE_B_PERIPHERAL, + + /* extra dual-role default-b states */ + OTG_STATE_B_WAIT_ACON, + OTG_STATE_B_HOST, + + /* dual-role default-a */ + OTG_STATE_A_IDLE, + OTG_STATE_A_WAIT_VRISE, + OTG_STATE_A_WAIT_BCON, + OTG_STATE_A_HOST, + OTG_STATE_A_SUSPEND, + OTG_STATE_A_PERIPHERAL, + OTG_STATE_A_WAIT_VFALL, + OTG_STATE_A_VBUS_ERR, +}; + +struct usb_phy; +struct usb_otg; + +/* for transceivers connected thru an ULPI interface, the user must + * provide access ops + */ +struct usb_phy_io_ops { + int (*read)(struct usb_phy *x, u32 reg); + int (*write)(struct usb_phy *x, u32 val, u32 reg); +}; + +struct usb_phy { + struct device *dev; + const char *label; + unsigned int flags; + + enum usb_phy_type type; + enum usb_otg_state state; + enum usb_phy_events last_event; + + struct usb_otg *otg; + + struct device *io_dev; + struct usb_phy_io_ops *io_ops; + void __iomem *io_priv; + + /* for notification of usb_phy_events */ + struct atomic_notifier_head notifier; + + /* to pass extra port status to the root hub */ + u16 port_status; + u16 port_change; + + /* to support controllers that have multiple transceivers */ + struct list_head head; + + /* initialize/shutdown the OTG controller */ + int (*init)(struct usb_phy *x); + void (*shutdown)(struct usb_phy *x); + + /* effective for B devices, ignored for A-peripheral */ + int (*set_power)(struct usb_phy *x, + unsigned mA); + + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct usb_phy *x, + int suspend); + + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); +}; + + +/* for board-specific init logic */ +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); + +/* helpers for direct access thru low-level io interface */ +static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) +{ + if (x->io_ops && x->io_ops->read) + return x->io_ops->read(x, reg); + + return -EINVAL; +} + +static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) +{ + if (x->io_ops && x->io_ops->write) + return x->io_ops->write(x, val, reg); + + return -EINVAL; +} + +static inline int +usb_phy_init(struct usb_phy *x) +{ + if (x->init) + return x->init(x); + + return 0; +} + +static inline void +usb_phy_shutdown(struct usb_phy *x) +{ + if (x->shutdown) + x->shutdown(x); +} + +/* for usb host and peripheral controller drivers */ +#ifdef CONFIG_USB_OTG_UTILS +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); +extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); +#else +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + return NULL; +} + +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) +{ + return NULL; +} + +static inline void usb_put_phy(struct usb_phy *x) +{ +} + +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) +{ +} + +#endif + +static inline int +usb_phy_set_power(struct usb_phy *x, unsigned mA) +{ + if (x && x->set_power) + return x->set_power(x, mA); + return 0; +} + +/* Context: can sleep */ +static inline int +usb_phy_set_suspend(struct usb_phy *x, int suspend) +{ + if (x->set_suspend != NULL) + return x->set_suspend(x, suspend); + else + return 0; +} + +static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +/* notifiers */ +static inline int +usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&x->notifier, nb); +} + +static inline void +usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&x->notifier, nb); +} + +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} +#endif /* __LINUX_USB_PHY_H */ diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h new file mode 100644 index 000000000000..edd2ec23d282 --- /dev/null +++ b/include/linux/usb/phy_companion.h @@ -0,0 +1,34 @@ +/* + * phy-companion.h -- phy companion to indicate the comparator part of PHY + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_PHY_COMPANION_H +#define __DRIVERS_PHY_COMPANION_H + +#include <linux/usb/otg.h> + +/* phy_companion to take care of VBUS, ID and srp capabilities */ +struct phy_companion { + + /* effective for A-peripheral, ignored for B devices */ + int (*set_vbus)(struct phy_companion *x, bool enabled); + + /* for B devices only: start session with A-Host */ + int (*start_srp)(struct phy_companion *x); +}; + +#endif /* __DRIVERS_PHY_COMPANION_H */ diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 3e93de7ecbc3..52f944dfe2fd 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -19,8 +19,8 @@ /* device can't handle its Configuration or Interface strings */ #define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 -/*device will morph if reset, don't use reset for handling errors */ -#define USB_QUIRK_RESET_MORPHS 0x00000010 +/* device can't be reset(e.g morph devices), don't use reset */ +#define USB_QUIRK_RESET 0x00000010 /* device has more interface descriptions than the bNumInterfaces count, and can't handle talking to these interfaces */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 86c0b451745d..ef9be7e1e190 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -301,17 +301,13 @@ extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); extern int usb_serial_resume(struct usb_interface *intf); -extern int ezusb_writememory(struct usb_serial *serial, int address, - unsigned char *data, int length, __u8 bRequest); -extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); - /* USB Serial console functions */ #ifdef CONFIG_USB_SERIAL_CONSOLE -extern void usb_serial_console_init(int debug, int minor); +extern void usb_serial_console_init(int minor); extern void usb_serial_console_exit(void); extern void usb_serial_console_disconnect(struct usb_serial *serial); #else -static inline void usb_serial_console_init(int debug, int minor) { } +static inline void usb_serial_console_init(int minor) { } static inline void usb_serial_console_exit(void) { } static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} #endif @@ -333,7 +329,7 @@ extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); extern void usb_serial_generic_disconnect(struct usb_serial *serial); extern void usb_serial_generic_release(struct usb_serial *serial); -extern int usb_serial_generic_register(int debug); +extern int usb_serial_generic_register(void); extern void usb_serial_generic_deregister(void); extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); @@ -355,30 +351,14 @@ extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; -static inline void usb_serial_debug_data(int debug, - struct device *dev, +static inline void usb_serial_debug_data(struct device *dev, const char *function, int size, const unsigned char *data) { - int i; - - if (debug) { - dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", - function, size); - for (i = 0; i < size; ++i) - printk("%.2x ", data[i]); - printk("\n"); - } + dev_dbg(dev, "%s - length = %d, data = %*ph\n", + function, size, size, data); } -/* Use our own dbg macro */ -#undef dbg -#define dbg(format, arg...) \ -do { \ - if (debug) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) - /* * Macro for reporting errors in write path to avoid inifinite loop * when port is used as a console. diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h new file mode 100644 index 000000000000..176b1ca06ae4 --- /dev/null +++ b/include/linux/usb/tegra_usb_phy.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_USB_PHY_H +#define __TEGRA_USB_PHY_H + +#include <linux/clk.h> +#include <linux/usb/otg.h> + +struct tegra_utmip_config { + u8 hssync_start_delay; + u8 elastic_limit; + u8 idle_wait_delay; + u8 term_range_adj; + u8 xcvr_setup; + u8 xcvr_lsfslew; + u8 xcvr_lsrslew; +}; + +struct tegra_ulpi_config { + int reset_gpio; + const char *clk; +}; + +enum tegra_usb_phy_port_speed { + TEGRA_USB_PHY_PORT_SPEED_FULL = 0, + TEGRA_USB_PHY_PORT_SPEED_LOW, + TEGRA_USB_PHY_PORT_SPEED_HIGH, +}; + +enum tegra_usb_phy_mode { + TEGRA_USB_PHY_MODE_DEVICE, + TEGRA_USB_PHY_MODE_HOST, +}; + +struct tegra_xtal_freq; + +struct tegra_usb_phy { + int instance; + const struct tegra_xtal_freq *freq; + void __iomem *regs; + void __iomem *pad_regs; + struct clk *clk; + struct clk *pll_u; + struct clk *pad_clk; + enum tegra_usb_phy_mode mode; + void *config; + struct usb_phy *ulpi; + struct usb_phy u_phy; + struct device *dev; +}; + +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode); + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy); + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy); + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed); + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy); + +#endif /* __TEGRA_USB_PHY_H */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index e84e769aaddc..bf99cd01be20 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -72,33 +72,9 @@ enum { US_DO_ALL_FLAGS }; #undef US_FLAG -/* - * The bias field for libusual and friends. - */ -#define USB_US_TYPE_NONE 0 -#define USB_US_TYPE_STOR 1 /* usb-storage */ -#define USB_US_TYPE_UB 2 /* ub */ - -#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF) -#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF) - #include <linux/usb/storage.h> -/* - */ extern int usb_usual_ignore_device(struct usb_interface *intf); extern struct usb_device_id usb_storage_usb_ids[]; -#ifdef CONFIG_USB_LIBUSUAL - -extern void usb_usual_set_present(int type); -extern void usb_usual_clear_present(int type); -extern int usb_usual_check_type(const struct usb_device_id *, int type); -#else - -#define usb_usual_set_present(t) do { } while(0) -#define usb_usual_clear_present(t) do { } while(0) -#define usb_usual_check_type(id, t) (0) -#endif /* CONFIG_USB_LIBUSUAL */ - #endif /* __LINUX_USB_USUAL_H */ diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 3b74666be027..4abe28e41cbc 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -131,6 +131,19 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 #define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 +/* USBDEVFS_DISCONNECT_CLAIM flags & struct */ + +/* disconnect-and-claim if the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01 +/* disconnect-and-claim except when the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02 + +struct usbdevfs_disconnect_claim { + unsigned int interface; + unsigned int flags; + char driver[USBDEVFS_MAXDRIVERNAME + 1]; +}; + #ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -211,5 +224,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) +#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index 9ce788d8cf49..bfa1d50fe15b 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -258,6 +258,22 @@ struct physdev_pci_device { uint8_t devfn; }; +#define PHYSDEVOP_DBGP_RESET_PREPARE 1 +#define PHYSDEVOP_DBGP_RESET_DONE 2 + +#define PHYSDEVOP_DBGP_BUS_UNKNOWN 0 +#define PHYSDEVOP_DBGP_BUS_PCI 1 + +#define PHYSDEVOP_dbgp_op 29 +struct physdev_dbgp_op { + /* IN */ + uint8_t op; + uint8_t bus; + union { + struct physdev_pci_device pci; + } u; +}; + /* * Notify that some PIRQ-bound event channels have been unmasked. * ** This command is obsolete since interface version 0x00030202 and is ** |