diff options
Diffstat (limited to 'include/uapi/sound/emu10k1.h')
| -rw-r--r-- | include/uapi/sound/emu10k1.h | 150 |
1 files changed, 96 insertions, 54 deletions
diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h index 1c1f1dd44611..c8e131d6da00 100644 --- a/include/uapi/sound/emu10k1.h +++ b/include/uapi/sound/emu10k1.h @@ -15,9 +15,6 @@ * ---- FX8010 ---- */ -#define EMU10K1_CARD_CREATIVE 0x00000000 -#define EMU10K1_CARD_EMUAPS 0x00000001 - #define EMU10K1_FX8010_PCM_COUNT 8 /* @@ -46,6 +43,19 @@ #define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */ #define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */ +#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */ +#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */ +#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */ +#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */ +#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */ + +/* Audigy Soundcards have a different instruction format */ +#define A_LOWORD_OPX_MASK 0x007ff000 +#define A_LOWORD_OPY_MASK 0x000007ff +#define A_HIWORD_OPCODE_MASK 0x0f000000 +#define A_HIWORD_RESULT_MASK 0x007ff000 +#define A_HIWORD_OPA_MASK 0x000007ff + /* GPRs */ #define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */ #define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */ @@ -53,6 +63,16 @@ #define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */ /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */ +#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ +#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ +#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ +#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ +#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ +#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" */ +#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_01 - _0F" */ +#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x1f "EMU32_IN_00 - _1F" - Only when .device = 0x0008 */ +#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x1f "EMU32_OUT_00 - _1F" - Only when .device = 0x0008 */ + #define C_00000000 0x40 #define C_00000001 0x41 #define C_00000002 0x42 @@ -81,12 +101,66 @@ #define GPR_NOISE1 0x59 /* noise source */ #define GPR_IRQ 0x5a /* IRQ register */ #define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */ + +/* Audigy constants */ +#define A_C_00000000 0xc0 +#define A_C_00000001 0xc1 +#define A_C_00000002 0xc2 +#define A_C_00000003 0xc3 +#define A_C_00000004 0xc4 +#define A_C_00000008 0xc5 +#define A_C_00000010 0xc6 +#define A_C_00000020 0xc7 +#define A_C_00000100 0xc8 +#define A_C_00010000 0xc9 +#define A_C_00000800 0xca +#define A_C_10000000 0xcb +#define A_C_20000000 0xcc +#define A_C_40000000 0xcd +#define A_C_80000000 0xce +#define A_C_7fffffff 0xcf +#define A_C_ffffffff 0xd0 +#define A_C_fffffffe 0xd1 +#define A_C_c0000000 0xd2 +#define A_C_4f1bbcdc 0xd3 +#define A_C_5a7ef9db 0xd4 +#define A_C_00100000 0xd5 +#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ +#define A_GPR_COND 0xd7 /* CCR, condition register */ +#define A_GPR_NOISE0 0xd8 /* noise source */ +#define A_GPR_NOISE1 0xd9 /* noise source */ +#define A_GPR_IRQ 0xda /* IRQ register */ +#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ +#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ + +/* Each FX general purpose register is 32 bits in length, all bits are used */ +#define FXGPREGBASE 0x100 /* FX general purpose registers base */ +#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ + +#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */ +#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */ + +/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */ +/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */ +/* locations are for external TRAM. */ +#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */ +#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */ + +/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */ +#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */ +#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ +#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ +#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ +#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ +#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ + #define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */ #define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ #define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ +#define A_GPR(x) (A_FXGPREGBASE + (x)) #define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ #define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ @@ -94,17 +168,6 @@ #define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ -#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ -#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ -#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ -#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ -#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ -#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */ -#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */ -#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x3f "EMU32_IN_00 - _3F" - Only when .device = 0x0008 */ -#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_00 - _3F" - Only when .device = 0x0008 */ -#define A_GPR(x) (A_FXGPREGBASE + (x)) - /* cc_reg constants */ #define CC_REG_NORMALIZED C_00000001 #define CC_REG_BORROW C_00000002 @@ -113,7 +176,17 @@ #define CC_REG_SATURATE C_00000010 #define CC_REG_NONZERO C_00000100 +#define A_CC_REG_NORMALIZED A_C_00000001 +#define A_CC_REG_BORROW A_C_00000002 +#define A_CC_REG_MINUS A_C_00000004 +#define A_CC_REG_ZERO A_C_00000008 +#define A_CC_REG_SATURATE A_C_00000010 +#define A_CC_REG_NONZERO A_C_00000100 + /* FX buses */ +// These are arbitrary mappings; our DSP code simply expects +// the config files to route the channels this way. +// The numbers are documented in {audigy,sb-live}-mixer.rst. #define FXBUS_PCM_LEFT 0x00 #define FXBUS_PCM_RIGHT 0x01 #define FXBUS_PCM_LEFT_REAR 0x02 @@ -203,38 +276,7 @@ #define A_EXTOUT_ADC_CAP_R 0x17 /* right */ #define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */ -/* Audigy constants */ -#define A_C_00000000 0xc0 -#define A_C_00000001 0xc1 -#define A_C_00000002 0xc2 -#define A_C_00000003 0xc3 -#define A_C_00000004 0xc4 -#define A_C_00000008 0xc5 -#define A_C_00000010 0xc6 -#define A_C_00000020 0xc7 -#define A_C_00000100 0xc8 -#define A_C_00010000 0xc9 -#define A_C_00000800 0xca -#define A_C_10000000 0xcb -#define A_C_20000000 0xcc -#define A_C_40000000 0xcd -#define A_C_80000000 0xce -#define A_C_7fffffff 0xcf -#define A_C_ffffffff 0xd0 -#define A_C_fffffffe 0xd1 -#define A_C_c0000000 0xd2 -#define A_C_4f1bbcdc 0xd3 -#define A_C_5a7ef9db 0xd4 -#define A_C_00100000 0xd5 -#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ -#define A_GPR_COND 0xd7 /* CCR, condition register */ -#define A_GPR_NOISE0 0xd8 /* noise source */ -#define A_GPR_NOISE1 0xd9 /* noise source */ -#define A_GPR_IRQ 0xda /* IRQ register */ -#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ -#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ - -/* definitions for debug register */ +/* Definitions for debug register. Note that these are for emu10k1 ONLY. */ #define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */ #define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */ #define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */ @@ -243,14 +285,14 @@ #define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */ #define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */ -/* tank memory address line */ -#ifndef __KERNEL__ -#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ -#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ -#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ -#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ -#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ -#endif +/* Definitions for emu10k2 debug register. */ +#define A_DBG_ZC 0x40000000 /* zero tram counter */ +#define A_DBG_SATURATION_OCCURED 0x20000000 +#define A_DBG_SATURATION_ADDR 0x0ffc0000 +#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */ +#define A_DBG_STEP 0x00010000 +#define A_DBG_CONDITION_CODE 0x0000f800 +#define A_DBG_STEP_ADDR 0x000003ff struct snd_emu10k1_fx8010_info { unsigned int internal_tram_size; /* in samples */ |