diff options
Diffstat (limited to 'include/soc/at91/at91rm9200_sdramc.h')
| -rw-r--r-- | include/soc/at91/at91rm9200_sdramc.h | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/include/soc/at91/at91rm9200_sdramc.h b/include/soc/at91/at91rm9200_sdramc.h new file mode 100644 index 000000000000..aa047f458f1b --- /dev/null +++ b/include/soc/at91/at91rm9200_sdramc.h @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Memory Controllers (SDRAMC only) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SDRAMC_H +#define AT91RM9200_SDRAMC_H + +/* SDRAM Controller registers */ +#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ +#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) +#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) +#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) +#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) +#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) +#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ +#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) +#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) + +#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ +#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ + +#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ +#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91RM9200_SDRAMC_NC_8 (0 << 0) +#define AT91RM9200_SDRAMC_NC_9 (1 << 0) +#define AT91RM9200_SDRAMC_NC_10 (2 << 0) +#define AT91RM9200_SDRAMC_NC_11 (3 << 0) +#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91RM9200_SDRAMC_NR_11 (0 << 2) +#define AT91RM9200_SDRAMC_NR_12 (1 << 2) +#define AT91RM9200_SDRAMC_NR_13 (2 << 2) +#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91RM9200_SDRAMC_NB_2 (0 << 4) +#define AT91RM9200_SDRAMC_NB_4 (1 << 4) +#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) +#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ +#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ +#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ +#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ +#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ +#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ + +#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ +#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ +#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ +#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ +#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ +#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ + +#endif |