diff options
Diffstat (limited to 'include/rdma/ib_verbs.h')
| -rw-r--r-- | include/rdma/ib_verbs.h | 203 |
1 files changed, 116 insertions, 87 deletions
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 43c1cf01c84b..7845fae6f2df 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -48,6 +48,7 @@ #include <linux/rwsem.h> #include <linux/scatterlist.h> #include <linux/workqueue.h> +#include <linux/socket.h> #include <uapi/linux/if_ether.h> #include <linux/atomic.h> @@ -64,6 +65,12 @@ union ib_gid { } global; }; +extern union ib_gid zgid; + +struct ib_gid_attr { + struct net_device *ndev; +}; + enum rdma_node_type { /* IB values map to NodeInfo:NodeType. */ RDMA_NODE_IB_CA = 1, @@ -284,7 +291,7 @@ enum ib_port_cap_flags { IB_PORT_BOOT_MGMT_SUP = 1 << 23, IB_PORT_LINK_LATENCY_SUP = 1 << 24, IB_PORT_CLIENT_REG_SUP = 1 << 25, - IB_PORT_IP_BASED_GIDS = 1 << 26 + IB_PORT_IP_BASED_GIDS = 1 << 26, }; enum ib_port_width { @@ -556,20 +563,18 @@ __attribute_const__ int ib_rate_to_mult(enum ib_rate rate); */ __attribute_const__ int ib_rate_to_mbps(enum ib_rate rate); -enum ib_mr_create_flags { - IB_MR_SIGNATURE_EN = 1, -}; /** - * ib_mr_init_attr - Memory region init attributes passed to routine - * ib_create_mr. - * @max_reg_descriptors: max number of registration descriptors that - * may be used with registration work requests. - * @flags: MR creation flags bit mask. + * enum ib_mr_type - memory region type + * @IB_MR_TYPE_MEM_REG: memory region that is used for + * normal registration + * @IB_MR_TYPE_SIGNATURE: memory region that is used for + * signature operations (data-integrity + * capable regions) */ -struct ib_mr_init_attr { - int max_reg_descriptors; - u32 flags; +enum ib_mr_type { + IB_MR_TYPE_MEM_REG, + IB_MR_TYPE_SIGNATURE, }; /** @@ -1252,9 +1257,11 @@ struct ib_udata { }; struct ib_pd { + u32 local_dma_lkey; struct ib_device *device; struct ib_uobject *uobject; atomic_t usecnt; /* count all resources */ + struct ib_mr *local_mr; }; struct ib_xrcd { @@ -1488,7 +1495,7 @@ struct ib_cache { rwlock_t lock; struct ib_event_handler event_handler; struct ib_pkey_cache **pkey_cache; - struct ib_gid_cache **gid_cache; + struct ib_gid_table **gid_cache; u8 *lmc_cache; }; @@ -1550,6 +1557,8 @@ struct ib_device { spinlock_t client_data_lock; struct list_head core_list; + /* Access to the client_data_list is protected by the client_data_lock + * spinlock and the lists_rwsem read-write semaphore */ struct list_head client_data_list; struct ib_cache cache; @@ -1572,9 +1581,47 @@ struct ib_device { struct ib_port_attr *port_attr); enum rdma_link_layer (*get_link_layer)(struct ib_device *device, u8 port_num); + /* When calling get_netdev, the HW vendor's driver should return the + * net device of device @device at port @port_num or NULL if such + * a net device doesn't exist. The vendor driver should call dev_hold + * on this net device. The HW vendor's device driver must guarantee + * that this function returns NULL before the net device reaches + * NETDEV_UNREGISTER_FINAL state. + */ + struct net_device *(*get_netdev)(struct ib_device *device, + u8 port_num); int (*query_gid)(struct ib_device *device, u8 port_num, int index, union ib_gid *gid); + /* When calling add_gid, the HW vendor's driver should + * add the gid of device @device at gid index @index of + * port @port_num to be @gid. Meta-info of that gid (for example, + * the network device related to this gid is available + * at @attr. @context allows the HW vendor driver to store extra + * information together with a GID entry. The HW vendor may allocate + * memory to contain this information and store it in @context when a + * new GID entry is written to. Params are consistent until the next + * call of add_gid or delete_gid. The function should return 0 on + * success or error otherwise. The function could be called + * concurrently for different ports. This function is only called + * when roce_gid_table is used. + */ + int (*add_gid)(struct ib_device *device, + u8 port_num, + unsigned int index, + const union ib_gid *gid, + const struct ib_gid_attr *attr, + void **context); + /* When calling del_gid, the HW vendor's driver should delete the + * gid of device @device at gid index @index of port @port_num. + * Upon the deletion of a GID entry, the HW vendor must free any + * allocated memory. The caller will clear @context afterwards. + * This function is only called when roce_gid_table is used. + */ + int (*del_gid)(struct ib_device *device, + u8 port_num, + unsigned int index, + void **context); int (*query_pkey)(struct ib_device *device, u8 port_num, u16 index, u16 *pkey); int (*modify_device)(struct ib_device *device, @@ -1668,11 +1715,9 @@ struct ib_device { int (*query_mr)(struct ib_mr *mr, struct ib_mr_attr *mr_attr); int (*dereg_mr)(struct ib_mr *mr); - int (*destroy_mr)(struct ib_mr *mr); - struct ib_mr * (*create_mr)(struct ib_pd *pd, - struct ib_mr_init_attr *mr_init_attr); - struct ib_mr * (*alloc_fast_reg_mr)(struct ib_pd *pd, - int max_page_list_len); + struct ib_mr * (*alloc_mr)(struct ib_pd *pd, + enum ib_mr_type mr_type, + u32 max_num_sg); struct ib_fast_reg_page_list * (*alloc_fast_reg_page_list)(struct ib_device *device, int page_list_len); void (*free_fast_reg_page_list)(struct ib_fast_reg_page_list *page_list); @@ -1724,6 +1769,7 @@ struct ib_device { int (*destroy_flow)(struct ib_flow *flow_id); int (*check_mr_status)(struct ib_mr *mr, u32 check_mask, struct ib_mr_status *mr_status); + void (*disassociate_ucontext)(struct ib_ucontext *ibcontext); struct ib_dma_mapping_ops *dma_ops; @@ -1761,8 +1807,30 @@ struct ib_device { struct ib_client { char *name; void (*add) (struct ib_device *); - void (*remove)(struct ib_device *); - + void (*remove)(struct ib_device *, void *client_data); + + /* Returns the net_dev belonging to this ib_client and matching the + * given parameters. + * @dev: An RDMA device that the net_dev use for communication. + * @port: A physical port number on the RDMA device. + * @pkey: P_Key that the net_dev uses if applicable. + * @gid: A GID that the net_dev uses to communicate. + * @addr: An IP address the net_dev is configured with. + * @client_data: The device's client data set by ib_set_client_data(). + * + * An ib_client that implements a net_dev on top of RDMA devices + * (such as IP over IB) should implement this callback, allowing the + * rdma_cm module to find the right net_dev for a given request. + * + * The caller is responsible for calling dev_put on the returned + * netdev. */ + struct net_device *(*get_net_dev_by_params)( + struct ib_device *dev, + u8 port, + u16 pkey, + const union ib_gid *gid, + const struct sockaddr *addr, + void *client_data); struct list_head list; }; @@ -2071,34 +2139,6 @@ static inline bool rdma_cap_eth_ah(const struct ib_device *device, u8 port_num) } /** - * rdma_cap_read_multi_sge - Check if the port of device has the capability - * RDMA Read Multiple Scatter-Gather Entries. - * @device: Device to check - * @port_num: Port number to check - * - * iWARP has a restriction that RDMA READ requests may only have a single - * Scatter/Gather Entry (SGE) in the work request. - * - * NOTE: although the linux kernel currently assumes all devices are either - * single SGE RDMA READ devices or identical SGE maximums for RDMA READs and - * WRITEs, according to Tom Talpey, this is not accurate. There are some - * devices out there that support more than a single SGE on RDMA READ - * requests, but do not support the same number of SGEs as they do on - * RDMA WRITE requests. The linux kernel would need rearchitecting to - * support these imbalanced READ/WRITE SGEs allowed devices. So, for now, - * suffice with either the device supports the same READ/WRITE SGEs, or - * it only gets one READ sge. - * - * Return: true for any device that allows more than one SGE in RDMA READ - * requests. - */ -static inline bool rdma_cap_read_multi_sge(struct ib_device *device, - u8 port_num) -{ - return !(device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_PROT_IWARP); -} - -/** * rdma_max_mad_size - Return the max MAD size required by this RDMA Port. * * @device: Device @@ -2115,6 +2155,26 @@ static inline size_t rdma_max_mad_size(const struct ib_device *device, u8 port_n return device->port_immutable[port_num].max_mad_size; } +/** + * rdma_cap_roce_gid_table - Check if the port of device uses roce_gid_table + * @device: Device to check + * @port_num: Port number to check + * + * RoCE GID table mechanism manages the various GIDs for a device. + * + * NOTE: if allocating the port's GID table has failed, this call will still + * return true, but any RoCE GID table API will fail. + * + * Return: true if the port uses RoCE GID table mechanism in order to manage + * its GIDs. + */ +static inline bool rdma_cap_roce_gid_table(const struct ib_device *device, + u8 port_num) +{ + return rdma_protocol_roce(device, port_num) && + device->add_gid && device->del_gid; +} + int ib_query_gid(struct ib_device *device, u8 port_num, int index, union ib_gid *gid); @@ -2135,20 +2195,9 @@ int ib_find_gid(struct ib_device *device, union ib_gid *gid, int ib_find_pkey(struct ib_device *device, u8 port_num, u16 pkey, u16 *index); -/** - * ib_alloc_pd - Allocates an unused protection domain. - * @device: The device on which to allocate the protection domain. - * - * A protection domain object provides an association between QPs, shared - * receive queues, address handles, memory regions, and memory windows. - */ struct ib_pd *ib_alloc_pd(struct ib_device *device); -/** - * ib_dealloc_pd - Deallocates a protection domain. - * @pd: The protection domain to deallocate. - */ -int ib_dealloc_pd(struct ib_pd *pd); +void ib_dealloc_pd(struct ib_pd *pd); /** * ib_create_ah - Creates an address handle for the given address vector. @@ -2775,33 +2824,9 @@ int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr); */ int ib_dereg_mr(struct ib_mr *mr); - -/** - * ib_create_mr - Allocates a memory region that may be used for - * signature handover operations. - * @pd: The protection domain associated with the region. - * @mr_init_attr: memory region init attributes. - */ -struct ib_mr *ib_create_mr(struct ib_pd *pd, - struct ib_mr_init_attr *mr_init_attr); - -/** - * ib_destroy_mr - Destroys a memory region that was created using - * ib_create_mr and removes it from HW translation tables. - * @mr: The memory region to destroy. - * - * This function can fail, if the memory region has memory windows bound to it. - */ -int ib_destroy_mr(struct ib_mr *mr); - -/** - * ib_alloc_fast_reg_mr - Allocates memory region usable with the - * IB_WR_FAST_REG_MR send work request. - * @pd: The protection domain associated with the region. - * @max_page_list_len: requested max physical buffer list length to be - * used with fast register work requests for this MR. - */ -struct ib_mr *ib_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len); +struct ib_mr *ib_alloc_mr(struct ib_pd *pd, + enum ib_mr_type mr_type, + u32 max_num_sg); /** * ib_alloc_fast_reg_page_list - Allocates a page list array @@ -2994,4 +3019,8 @@ static inline int ib_check_mr_access(int flags) int ib_check_mr_status(struct ib_mr *mr, u32 check_mask, struct ib_mr_status *mr_status); +struct net_device *ib_get_net_dev_by_params(struct ib_device *dev, u8 port, + u16 pkey, const union ib_gid *gid, + const struct sockaddr *addr); + #endif /* IB_VERBS_H */ |