diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/cpuhotplug.h | 2 | ||||
-rw-r--r-- | include/linux/device.h | 2 | ||||
-rw-r--r-- | include/linux/i2c.h | 3 | ||||
-rw-r--r-- | include/linux/mlx4/device.h | 1 | ||||
-rw-r--r-- | include/linux/mlx5/qp.h | 1 | ||||
-rw-r--r-- | include/linux/mm_types.h | 64 | ||||
-rw-r--r-- | include/linux/mtd/nand.h | 6 | ||||
-rw-r--r-- | include/linux/pci.h | 1 | ||||
-rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 4 | ||||
-rw-r--r-- | include/linux/ptp_clock_kernel.h | 20 |
10 files changed, 68 insertions, 36 deletions
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index b56573bf440d..82b30e638430 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -39,8 +39,6 @@ enum cpuhp_state { CPUHP_PCI_XGENE_DEAD, CPUHP_IOMMU_INTEL_DEAD, CPUHP_LUSTRE_CFS_DEAD, - CPUHP_SCSI_BNX2FC_DEAD, - CPUHP_SCSI_BNX2I_DEAD, CPUHP_WORKQUEUE_PREP, CPUHP_POWER_NUMA_PREPARE, CPUHP_HRTIMERS_PREPARE, diff --git a/include/linux/device.h b/include/linux/device.h index 723cd54b94da..beabdbc08420 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -843,7 +843,7 @@ struct dev_links_info { * hibernation, system resume and during runtime PM transitions * along with subsystem-level and driver-level callbacks. * @pins: For device pin management. - * See Documentation/pinctrl.txt for details. + * See Documentation/driver-api/pinctl.rst for details. * @msi_list: Hosts MSI descriptors * @msi_domain: The generic MSI domain this device is using. * @numa_node: NUMA node this device is close to. diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ca5b86a753..d501d3956f13 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -689,7 +689,8 @@ i2c_unlock_adapter(struct i2c_adapter *adapter) #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ #define I2C_CLASS_SPD (1<<7) /* Memory modules */ -#define I2C_CLASS_DEPRECATED (1<<8) /* Warn users that adapter will stop using classes */ +/* Warn users that the adapter doesn't support classes anymore */ +#define I2C_CLASS_DEPRECATED (1<<8) /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index aad5d81dfb44..b54517c05e9a 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -620,6 +620,7 @@ struct mlx4_caps { u32 dmfs_high_rate_qpn_base; u32 dmfs_high_rate_qpn_range; u32 vf_caps; + bool wol_port[MLX4_MAX_PORTS + 1]; struct mlx4_rate_limit_caps rl_caps; }; diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index 6f41270d80c0..f378dc0e7eaf 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -212,7 +212,6 @@ struct mlx5_wqe_ctrl_seg { #define MLX5_WQE_CTRL_OPCODE_MASK 0xff #define MLX5_WQE_CTRL_WQE_INDEX_MASK 0x00ffff00 #define MLX5_WQE_CTRL_WQE_INDEX_SHIFT 8 -#define MLX5_WQE_AV_EXT 0x80000000 enum { MLX5_ETH_WQE_L3_INNER_CSUM = 1 << 4, diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 7f384bb62d8e..3cadee0a3508 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -487,14 +487,12 @@ struct mm_struct { /* numa_scan_seq prevents two threads setting pte_numa */ int numa_scan_seq; #endif -#if defined(CONFIG_NUMA_BALANCING) || defined(CONFIG_COMPACTION) /* * An operation with batched TLB flushing is going on. Anything that * can move process memory needs to flush the TLB when moving a * PROT_NONE or PROT_NUMA mapped page. */ - bool tlb_flush_pending; -#endif + atomic_t tlb_flush_pending; #ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH /* See flush_tlb_batched_pending() */ bool tlb_flush_batched; @@ -522,46 +520,60 @@ static inline cpumask_t *mm_cpumask(struct mm_struct *mm) return mm->cpu_vm_mask_var; } -#if defined(CONFIG_NUMA_BALANCING) || defined(CONFIG_COMPACTION) +struct mmu_gather; +extern void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end); +extern void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end); + /* * Memory barriers to keep this state in sync are graciously provided by * the page table locks, outside of which no page table modifications happen. - * The barriers below prevent the compiler from re-ordering the instructions - * around the memory barriers that are already present in the code. + * The barriers are used to ensure the order between tlb_flush_pending updates, + * which happen while the lock is not taken, and the PTE updates, which happen + * while the lock is taken, are serialized. */ static inline bool mm_tlb_flush_pending(struct mm_struct *mm) { - barrier(); - return mm->tlb_flush_pending; + return atomic_read(&mm->tlb_flush_pending) > 0; +} + +/* + * Returns true if there are two above TLB batching threads in parallel. + */ +static inline bool mm_tlb_flush_nested(struct mm_struct *mm) +{ + return atomic_read(&mm->tlb_flush_pending) > 1; +} + +static inline void init_tlb_flush_pending(struct mm_struct *mm) +{ + atomic_set(&mm->tlb_flush_pending, 0); } -static inline void set_tlb_flush_pending(struct mm_struct *mm) + +static inline void inc_tlb_flush_pending(struct mm_struct *mm) { - mm->tlb_flush_pending = true; + atomic_inc(&mm->tlb_flush_pending); /* - * Guarantee that the tlb_flush_pending store does not leak into the + * Guarantee that the tlb_flush_pending increase does not leak into the * critical section updating the page tables */ smp_mb__before_spinlock(); } + /* Clearing is done after a TLB flush, which also provides a barrier. */ -static inline void clear_tlb_flush_pending(struct mm_struct *mm) -{ - barrier(); - mm->tlb_flush_pending = false; -} -#else -static inline bool mm_tlb_flush_pending(struct mm_struct *mm) -{ - return false; -} -static inline void set_tlb_flush_pending(struct mm_struct *mm) -{ -} -static inline void clear_tlb_flush_pending(struct mm_struct *mm) +static inline void dec_tlb_flush_pending(struct mm_struct *mm) { + /* + * Guarantee that the tlb_flush_pending does not not leak into the + * critical section, since we must order the PTE change and changes to + * the pending TLB flush indication. We could have relied on TLB flush + * as a memory barrier, but this behavior is not clearly documented. + */ + smp_mb__before_atomic(); + atomic_dec(&mm->tlb_flush_pending); } -#endif struct vm_fault; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 892148c448cc..5216d2eb2289 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -681,10 +681,10 @@ struct nand_buffers { * @tWW_min: WP# transition to WE# low */ struct nand_sdr_timings { - u32 tBERS_max; + u64 tBERS_max; u32 tCCS_min; - u32 tPROG_max; - u32 tR_max; + u64 tPROG_max; + u64 tR_max; u32 tALH_min; u32 tADL_min; u32 tALS_min; diff --git a/include/linux/pci.h b/include/linux/pci.h index 4869e66dd659..a75c13673852 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1067,6 +1067,7 @@ void pcie_flr(struct pci_dev *dev); int __pci_reset_function(struct pci_dev *dev); int __pci_reset_function_locked(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev); +int pci_reset_function_locked(struct pci_dev *dev); int pci_try_reset_function(struct pci_dev *dev); int pci_probe_reset_slot(struct pci_slot *slot); int pci_reset_slot(struct pci_slot *slot); diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 231d3075815a..e91d1b6a260d 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -81,8 +81,8 @@ * it. * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a * value on the line. Use argument 1 to indicate high level, argument 0 to - * indicate low level. (Please see Documentation/pinctrl.txt, section - * "GPIO mode pitfalls" for a discussion around this parameter.) + * indicate low level. (Please see Documentation/driver-api/pinctl.rst, + * section "GPIO mode pitfalls" for a discussion around this parameter.) * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index a026bfd089db..51349d124ee5 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -99,6 +99,11 @@ struct system_device_crosststamp; * parameter func: the desired function to use. * parameter chan: the function channel index to use. * + * @do_work: Request driver to perform auxiliary (periodic) operations + * Driver should return delay of the next auxiliary work scheduling + * time (>=0) or negative value in case further scheduling + * is not required. + * * Drivers should embed their ptp_clock_info within a private * structure, obtaining a reference to it using container_of(). * @@ -126,6 +131,7 @@ struct ptp_clock_info { struct ptp_clock_request *request, int on); int (*verify)(struct ptp_clock_info *ptp, unsigned int pin, enum ptp_pin_function func, unsigned int chan); + long (*do_aux_work)(struct ptp_clock_info *ptp); }; struct ptp_clock; @@ -211,6 +217,16 @@ extern int ptp_clock_index(struct ptp_clock *ptp); int ptp_find_pin(struct ptp_clock *ptp, enum ptp_pin_function func, unsigned int chan); +/** + * ptp_schedule_worker() - schedule ptp auxiliary work + * + * @ptp: The clock obtained from ptp_clock_register(). + * @delay: number of jiffies to wait before queuing + * See kthread_queue_delayed_work() for more info. + */ + +int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay); + #else static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, struct device *parent) @@ -225,6 +241,10 @@ static inline int ptp_clock_index(struct ptp_clock *ptp) static inline int ptp_find_pin(struct ptp_clock *ptp, enum ptp_pin_function func, unsigned int chan) { return -1; } +static inline int ptp_schedule_worker(struct ptp_clock *ptp, + unsigned long delay) +{ return -EOPNOTSUPP; } + #endif #endif |