diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/iio/buffer-dma.h | 152 | ||||
-rw-r--r-- | include/linux/iio/buffer-dmaengine.h | 18 | ||||
-rw-r--r-- | include/linux/iio/buffer.h | 16 | ||||
-rw-r--r-- | include/linux/iio/configfs.h | 15 | ||||
-rw-r--r-- | include/linux/iio/iio.h | 2 | ||||
-rw-r--r-- | include/linux/iio/sw_trigger.h | 70 | ||||
-rw-r--r-- | include/linux/mfd/palmas.h | 75 |
7 files changed, 324 insertions, 24 deletions
diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h new file mode 100644 index 000000000000..767467d886de --- /dev/null +++ b/include/linux/iio/buffer-dma.h @@ -0,0 +1,152 @@ +/* + * Copyright 2013-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __INDUSTRIALIO_DMA_BUFFER_H__ +#define __INDUSTRIALIO_DMA_BUFFER_H__ + +#include <linux/list.h> +#include <linux/kref.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/iio/buffer.h> + +struct iio_dma_buffer_queue; +struct iio_dma_buffer_ops; +struct device; + +struct iio_buffer_block { + u32 size; + u32 bytes_used; +}; + +/** + * enum iio_block_state - State of a struct iio_dma_buffer_block + * @IIO_BLOCK_STATE_DEQUEUED: Block is not queued + * @IIO_BLOCK_STATE_QUEUED: Block is on the incoming queue + * @IIO_BLOCK_STATE_ACTIVE: Block is currently being processed by the DMA + * @IIO_BLOCK_STATE_DONE: Block is on the outgoing queue + * @IIO_BLOCK_STATE_DEAD: Block has been marked as to be freed + */ +enum iio_block_state { + IIO_BLOCK_STATE_DEQUEUED, + IIO_BLOCK_STATE_QUEUED, + IIO_BLOCK_STATE_ACTIVE, + IIO_BLOCK_STATE_DONE, + IIO_BLOCK_STATE_DEAD, +}; + +/** + * struct iio_dma_buffer_block - IIO buffer block + * @head: List head + * @size: Total size of the block in bytes + * @bytes_used: Number of bytes that contain valid data + * @vaddr: Virutal address of the blocks memory + * @phys_addr: Physical address of the blocks memory + * @queue: Parent DMA buffer queue + * @kref: kref used to manage the lifetime of block + * @state: Current state of the block + */ +struct iio_dma_buffer_block { + /* May only be accessed by the owner of the block */ + struct list_head head; + size_t bytes_used; + + /* + * Set during allocation, constant thereafter. May be accessed read-only + * by anybody holding a reference to the block. + */ + void *vaddr; + dma_addr_t phys_addr; + size_t size; + struct iio_dma_buffer_queue *queue; + + /* Must not be accessed outside the core. */ + struct kref kref; + /* + * Must not be accessed outside the core. Access needs to hold + * queue->list_lock if the block is not owned by the core. + */ + enum iio_block_state state; +}; + +/** + * struct iio_dma_buffer_queue_fileio - FileIO state for the DMA buffer + * @blocks: Buffer blocks used for fileio + * @active_block: Block being used in read() + * @pos: Read offset in the active block + * @block_size: Size of each block + */ +struct iio_dma_buffer_queue_fileio { + struct iio_dma_buffer_block *blocks[2]; + struct iio_dma_buffer_block *active_block; + size_t pos; + size_t block_size; +}; + +/** + * struct iio_dma_buffer_queue - DMA buffer base structure + * @buffer: IIO buffer base structure + * @dev: Parent device + * @ops: DMA buffer callbacks + * @lock: Protects the incoming list, active and the fields in the fileio + * substruct + * @list_lock: Protects lists that contain blocks which can be modified in + * atomic context as well as blocks on those lists. This is the outgoing queue + * list and typically also a list of active blocks in the part that handles + * the DMA controller + * @incoming: List of buffers on the incoming queue + * @outgoing: List of buffers on the outgoing queue + * @active: Whether the buffer is currently active + * @fileio: FileIO state + */ +struct iio_dma_buffer_queue { + struct iio_buffer buffer; + struct device *dev; + const struct iio_dma_buffer_ops *ops; + + struct mutex lock; + spinlock_t list_lock; + struct list_head incoming; + struct list_head outgoing; + + bool active; + + struct iio_dma_buffer_queue_fileio fileio; +}; + +/** + * struct iio_dma_buffer_ops - DMA buffer callback operations + * @submit: Called when a block is submitted to the DMA controller + * @abort: Should abort all pending transfers + */ +struct iio_dma_buffer_ops { + int (*submit)(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block); + void (*abort)(struct iio_dma_buffer_queue *queue); +}; + +void iio_dma_buffer_block_done(struct iio_dma_buffer_block *block); +void iio_dma_buffer_block_list_abort(struct iio_dma_buffer_queue *queue, + struct list_head *list); + +int iio_dma_buffer_enable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_disable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, + char __user *user_buffer); +size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); +int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_request_update(struct iio_buffer *buffer); + +int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, + struct device *dma_dev, const struct iio_dma_buffer_ops *ops); +void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue); +void iio_dma_buffer_release(struct iio_dma_buffer_queue *queue); + +#endif diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h new file mode 100644 index 000000000000..5dcddf427bb0 --- /dev/null +++ b/include/linux/iio/buffer-dmaengine.h @@ -0,0 +1,18 @@ +/* + * Copyright 2014-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_DMAENGINE_H__ +#define __IIO_DMAENGINE_H__ + +struct iio_buffer; +struct device; + +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, + const char *channel); +void iio_dmaengine_buffer_free(struct iio_buffer *buffer); + +#endif diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 1600c55828e0..2ec3ad58e8a0 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -18,6 +18,12 @@ struct iio_buffer; /** + * INDIO_BUFFER_FLAG_FIXED_WATERMARK - Watermark level of the buffer can not be + * configured. It has a fixed value which will be buffer specific. + */ +#define INDIO_BUFFER_FLAG_FIXED_WATERMARK BIT(0) + +/** * struct iio_buffer_access_funcs - access functions for buffers. * @store_to: actually store stuff to the buffer * @read_first_n: try to get a specified number of bytes (must exist) @@ -27,9 +33,15 @@ struct iio_buffer; * storage. * @set_bytes_per_datum:set number of bytes per datum * @set_length: set number of datums in buffer + * @enable: called if the buffer is attached to a device and the + * device starts sampling. Calls are balanced with + * @disable. + * @disable: called if the buffer is attached to a device and the + * device stops sampling. Calles are balanced with @enable. * @release: called when the last reference to the buffer is dropped, * should free all resources allocated by the buffer. * @modes: Supported operating modes by this buffer type + * @flags: A bitmask combination of INDIO_BUFFER_FLAG_* * * The purpose of this structure is to make the buffer element * modular as event for a given driver, different usecases may require @@ -51,9 +63,13 @@ struct iio_buffer_access_funcs { int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); int (*set_length)(struct iio_buffer *buffer, int length); + int (*enable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + int (*disable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + void (*release)(struct iio_buffer *buffer); unsigned int modes; + unsigned int flags; }; /** diff --git a/include/linux/iio/configfs.h b/include/linux/iio/configfs.h new file mode 100644 index 000000000000..93befd67c15c --- /dev/null +++ b/include/linux/iio/configfs.h @@ -0,0 +1,15 @@ +/* + * Industrial I/O configfs support + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __IIO_CONFIGFS +#define __IIO_CONFIGFS + +extern struct configfs_subsystem iio_configfs_subsys; + +#endif /* __IIO_CONFIGFS */ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 19c94c9acc81..b5894118755f 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -636,6 +636,8 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) } #endif +ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals); + int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, int *fract); diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h new file mode 100644 index 000000000000..5198f8ed08a4 --- /dev/null +++ b/include/linux/iio/sw_trigger.h @@ -0,0 +1,70 @@ +/* + * Industrial I/O software trigger interface + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __IIO_SW_TRIGGER +#define __IIO_SW_TRIGGER + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/iio/iio.h> +#include <linux/configfs.h> + +#define module_iio_sw_trigger_driver(__iio_sw_trigger_type) \ + module_driver(__iio_sw_trigger_type, iio_register_sw_trigger_type, \ + iio_unregister_sw_trigger_type) + +struct iio_sw_trigger_ops; + +struct iio_sw_trigger_type { + const char *name; + struct module *owner; + const struct iio_sw_trigger_ops *ops; + struct list_head list; + struct config_group *group; +}; + +struct iio_sw_trigger { + struct iio_trigger *trigger; + struct iio_sw_trigger_type *trigger_type; + struct config_group group; +}; + +struct iio_sw_trigger_ops { + struct iio_sw_trigger* (*probe)(const char *); + int (*remove)(struct iio_sw_trigger *); +}; + +static inline +struct iio_sw_trigger *to_iio_sw_trigger(struct config_item *item) +{ + return container_of(to_config_group(item), struct iio_sw_trigger, + group); +} + +int iio_register_sw_trigger_type(struct iio_sw_trigger_type *tt); +void iio_unregister_sw_trigger_type(struct iio_sw_trigger_type *tt); + +struct iio_sw_trigger *iio_sw_trigger_create(const char *, const char *); +void iio_sw_trigger_destroy(struct iio_sw_trigger *); + +int iio_sw_trigger_type_configfs_register(struct iio_sw_trigger_type *tt); +void iio_sw_trigger_type_configfs_unregister(struct iio_sw_trigger_type *tt); + +static inline +void iio_swt_group_init_type_name(struct iio_sw_trigger *t, + const char *name, + struct config_item_type *type) +{ +#ifdef CONFIG_CONFIGFS_FS + config_group_init_type_name(&t->group, name, type); +#endif +} + +#endif /* __IIO_SW_TRIGGER */ diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 13e1d96935ed..c800dbc42079 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -134,21 +134,32 @@ struct palmas_pmic_driver_data { struct regulator_config config); }; +struct palmas_adc_wakeup_property { + int adc_channel_number; + int adc_high_threshold; + int adc_low_threshold; +}; + struct palmas_gpadc_platform_data { /* Channel 3 current source is only enabled during conversion */ - int ch3_current; + int ch3_current; /* 0: off; 1: 10uA; 2: 400uA; 3: 800 uA */ /* Channel 0 current source can be used for battery detection. * If used for battery detection this will cause a permanent current * consumption depending on current level set here. */ - int ch0_current; + int ch0_current; /* 0: off; 1: 5uA; 2: 15uA; 3: 20 uA */ + bool extended_delay; /* use extended delay for conversion */ /* default BAT_REMOVAL_DAT setting on device probe */ int bat_removal; /* Sets the START_POLARITY bit in the RT_CTRL register */ int start_polarity; + + int auto_conversion_period_ms; + struct palmas_adc_wakeup_property *adc_wakeup1_data; + struct palmas_adc_wakeup_property *adc_wakeup2_data; }; struct palmas_reg_init { @@ -405,28 +416,7 @@ struct palmas_gpadc_calibration { s32 offset_error; }; -struct palmas_gpadc { - struct device *dev; - struct palmas *palmas; - - int ch3_current; - int ch0_current; - - int gpadc_force; - - int bat_removal; - - struct mutex reading_lock; - struct completion irq_complete; - - int eoc_sw_irq; - - struct palmas_gpadc_calibration *palmas_cal_tbl; - - int conv0_channel; - int conv1_channel; - int rt_channel; -}; +#define PALMAS_DATASHEET_NAME(_name) "palmas-gpadc-chan-"#_name struct palmas_gpadc_result { s32 raw_code; @@ -520,6 +510,43 @@ enum palmas_irqs { PALMAS_NUM_IRQ, }; +/* Palmas GPADC Channels */ +enum { + PALMAS_ADC_CH_IN0, + PALMAS_ADC_CH_IN1, + PALMAS_ADC_CH_IN2, + PALMAS_ADC_CH_IN3, + PALMAS_ADC_CH_IN4, + PALMAS_ADC_CH_IN5, + PALMAS_ADC_CH_IN6, + PALMAS_ADC_CH_IN7, + PALMAS_ADC_CH_IN8, + PALMAS_ADC_CH_IN9, + PALMAS_ADC_CH_IN10, + PALMAS_ADC_CH_IN11, + PALMAS_ADC_CH_IN12, + PALMAS_ADC_CH_IN13, + PALMAS_ADC_CH_IN14, + PALMAS_ADC_CH_IN15, + PALMAS_ADC_CH_MAX, +}; + +/* Palmas GPADC Channel0 Current Source */ +enum { + PALMAS_ADC_CH0_CURRENT_SRC_0, + PALMAS_ADC_CH0_CURRENT_SRC_5, + PALMAS_ADC_CH0_CURRENT_SRC_15, + PALMAS_ADC_CH0_CURRENT_SRC_20, +}; + +/* Palmas GPADC Channel3 Current Source */ +enum { + PALMAS_ADC_CH3_CURRENT_SRC_0, + PALMAS_ADC_CH3_CURRENT_SRC_10, + PALMAS_ADC_CH3_CURRENT_SRC_400, + PALMAS_ADC_CH3_CURRENT_SRC_800, +}; + struct palmas_pmic { struct palmas *palmas; struct device *dev; |