diff options
Diffstat (limited to 'include/linux/rmi.h')
| -rw-r--r-- | include/linux/rmi.h | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/include/linux/rmi.h b/include/linux/rmi.h new file mode 100644 index 000000000000..c748fa302067 --- /dev/null +++ b/include/linux/rmi.h @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2011-2016 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _RMI_H +#define _RMI_H +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/types.h> + +#define NAME_BUFFER_SIZE 256 + +/** + * struct rmi_f01_power - override default power management settings. + * + */ +enum rmi_f01_nosleep { + RMI_F01_NOSLEEP_DEFAULT = 0, + RMI_F01_NOSLEEP_OFF = 1, + RMI_F01_NOSLEEP_ON = 2 +}; + +/** + * struct rmi_f01_power_management -When non-zero, these values will be written + * to the touch sensor to override the default firmware settigns. For a + * detailed explanation of what each field does, see the corresponding + * documention in the RMI4 specification. + * + * @nosleep - specifies whether the device is permitted to sleep or doze (that + * is, enter a temporary low power state) when no fingers are touching the + * sensor. + * @wakeup_threshold - controls the capacitance threshold at which the touch + * sensor will decide to wake up from that low power state. + * @doze_holdoff - controls how long the touch sensor waits after the last + * finger lifts before entering the doze state, in units of 100ms. + * @doze_interval - controls the interval between checks for finger presence + * when the touch sensor is in doze mode, in units of 10ms. + */ +struct rmi_f01_power_management { + enum rmi_f01_nosleep nosleep; + u8 wakeup_threshold; + u8 doze_holdoff; + u8 doze_interval; +}; + +/** + * struct rmi_device_platform_data - system specific configuration info. + * + * @reset_delay_ms - after issuing a reset command to the touch sensor, the + * driver waits a few milliseconds to give the firmware a chance to + * to re-initialize. You can override the default wait period here. + */ +struct rmi_device_platform_data { + int reset_delay_ms; + + /* function handler pdata */ + struct rmi_f01_power_management power_management; +}; + +/** + * struct rmi_function_descriptor - RMI function base addresses + * + * @query_base_addr: The RMI Query base address + * @command_base_addr: The RMI Command base address + * @control_base_addr: The RMI Control base address + * @data_base_addr: The RMI Data base address + * @interrupt_source_count: The number of irqs this RMI function needs + * @function_number: The RMI function number + * + * This struct is used when iterating the Page Description Table. The addresses + * are 16-bit values to include the current page address. + * + */ +struct rmi_function_descriptor { + u16 query_base_addr; + u16 command_base_addr; + u16 control_base_addr; + u16 data_base_addr; + u8 interrupt_source_count; + u8 function_number; + u8 function_version; +}; + +struct rmi_device; + +/** + * struct rmi_transport_dev - represent an RMI transport device + * + * @dev: Pointer to the communication device, e.g. i2c or spi + * @rmi_dev: Pointer to the RMI device + * @proto_name: name of the transport protocol (SPI, i2c, etc) + * @ops: pointer to transport operations implementation + * + * The RMI transport device implements the glue between different communication + * buses such as I2C and SPI. + * + */ +struct rmi_transport_dev { + struct device *dev; + struct rmi_device *rmi_dev; + + const char *proto_name; + const struct rmi_transport_ops *ops; + + struct rmi_device_platform_data pdata; + + struct input_dev *input; + + void *attn_data; + int attn_size; +}; + +/** + * struct rmi_transport_ops - defines transport protocol operations. + * + * @write_block: Writing a block of data to the specified address + * @read_block: Read a block of data from the specified address. + */ +struct rmi_transport_ops { + int (*write_block)(struct rmi_transport_dev *xport, u16 addr, + const void *buf, size_t len); + int (*read_block)(struct rmi_transport_dev *xport, u16 addr, + void *buf, size_t len); + int (*reset)(struct rmi_transport_dev *xport, u16 reset_addr); +}; + +/** + * struct rmi_driver - driver for an RMI4 sensor on the RMI bus. + * + * @driver: Device driver model driver + * @reset_handler: Called when a reset is detected. + * @clear_irq_bits: Clear the specified bits in the current interrupt mask. + * @set_irq_bist: Set the specified bits in the current interrupt mask. + * @store_productid: Callback for cache product id from function 01 + * @data: Private data pointer + * + */ +struct rmi_driver { + struct device_driver driver; + + int (*reset_handler)(struct rmi_device *rmi_dev); + int (*clear_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask); + int (*set_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask); + int (*store_productid)(struct rmi_device *rmi_dev); + int (*set_input_params)(struct rmi_device *rmi_dev, + struct input_dev *input); + void *data; +}; + +/** + * struct rmi_device - represents an RMI4 sensor device on the RMI bus. + * + * @dev: The device created for the RMI bus + * @number: Unique number for the device on the bus. + * @driver: Pointer to associated driver + * @xport: Pointer to the transport interface + * + */ +struct rmi_device { + struct device dev; + int number; + + struct rmi_driver *driver; + struct rmi_transport_dev *xport; + +}; + +struct rmi_driver_data { + struct list_head function_list; + + struct rmi_device *rmi_dev; + + struct rmi_function *f01_container; + bool f01_bootloader_mode; + + u32 attn_count; + int num_of_irq_regs; + int irq_count; + unsigned long *irq_status; + unsigned long *fn_irq_bits; + unsigned long *current_irq_mask; + unsigned long *new_irq_mask; + struct mutex irq_mutex; + struct input_dev *input; + + u8 pdt_props; + u8 bsr; + + bool enabled; + + void *data; +}; + +int rmi_register_transport_device(struct rmi_transport_dev *xport); +void rmi_unregister_transport_device(struct rmi_transport_dev *xport); +int rmi_process_interrupt_requests(struct rmi_device *rmi_dev); + +int rmi_driver_suspend(struct rmi_device *rmi_dev); +int rmi_driver_resume(struct rmi_device *rmi_dev); +#endif |