4 files changed, 68 insertions, 13 deletions
diff --git a/include/linux/platform_data/asoc-poodle.h b/include/linux/platform_data/asoc-poodle.h
new file mode 100644
index 000000000000..2052fad55c5c
--- /dev/null
+++ b/include/linux/platform_data/asoc-poodle.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_PLATFORM_DATA_POODLE_AUDIO
+#define __LINUX_PLATFORM_DATA_POODLE_AUDIO
+
+/* locomo is not a proper gpio driver, and uses its own api */
+struct poodle_audio_platform_data {
+	struct device	*locomo_dev;
+
+	int		gpio_amp_on;
+	int		gpio_mute_l;
+	int		gpio_mute_r;
+	int		gpio_232vcc_on;
+	int		gpio_jk_b;
+};
+
+#endif
diff --git a/include/linux/platform_data/asoc-pxa.h b/include/linux/platform_data/asoc-pxa.h
new file mode 100644
index 000000000000..327454cd8246
--- /dev/null
+++ b/include/linux/platform_data/asoc-pxa.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_PXA_AUDIO_H__
+#define __SOC_PXA_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
+typedef struct {
+	int (*startup)(struct snd_pcm_substream *, void *);
+	void (*shutdown)(struct snd_pcm_substream *, void *);
+	void (*suspend)(void *);
+	void (*resume)(void *);
+	void *priv;
+	int reset_gpio;
+	void *codec_pdata[AC97_BUS_MAX_DEVICES];
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/include/linux/platform_data/pcmcia-pxa2xx_viper.h b/include/linux/platform_data/pcmcia-pxa2xx_viper.h
deleted file mode 100644
index a23b58aff9e1..000000000000
--- a/include/linux/platform_data/pcmcia-pxa2xx_viper.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h
index b3d574778326..6333bac166a5 100644
--- a/include/linux/platform_data/video-pxafb.h
+++ b/include/linux/platform_data/video-pxafb.h
@@ -8,7 +8,6 @@
  */
 
 #include <linux/fb.h>
-#include <mach/regs-lcd.h>
 
 /*
  * Supported LCD connections
@@ -153,6 +152,27 @@ struct pxafb_mach_info {
 void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
+/* smartpanel related */
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY		(0x6 << 9)
+#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
+
 #ifdef CONFIG_FB_PXA_SMARTPANEL
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
 extern int pxafb_smart_flush(struct fb_info *info);