diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 3604 | ||||
| -rw-r--r-- | include/linux/mfd/lp87565.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/rk808.h | 175 |
3 files changed, 3061 insertions, 720 deletions
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index dcec96f01879..fa397722f17e 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -1,28 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Host communication command constants for ChromeOS EC * * Copyright (C) 2012 Google, Inc * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * The ChromeOS EC multi function device is used to mux all the requests - * to the EC device for its multiple features: keyboard controller, - * battery charging and regulator control, firmware update. - * - * NOTE: This file is copied verbatim from the ChromeOS EC Open Source - * project in an attempt to make future updates easy to make. + * NOTE: This file is auto-generated from ChromeOS EC Open Source code from + * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h */ +/* Host communication command constants for Chrome EC */ + #ifndef __CROS_EC_COMMANDS_H #define __CROS_EC_COMMANDS_H + + + +#define BUILD_ASSERT(_cond) + /* * Current version of this protocol * @@ -33,7 +28,7 @@ #define EC_PROTO_VERSION 0x00000002 /* Command version mask */ -#define EC_VER_MASK(version) (1UL << (version)) +#define EC_VER_MASK(version) BIT(version) /* I/O addresses for ACPI commands */ #define EC_LPC_ADDR_ACPI_DATA 0x62 @@ -47,25 +42,28 @@ /* Protocol version 2 */ #define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ #define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is - * EC_PROTO2_MAX_PARAM_SIZE */ + * EC_PROTO2_MAX_PARAM_SIZE + */ /* Protocol version 3 */ #define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ #define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ -/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff - * and they tell the kernel that so we have to think of it as two parts. */ +/* + * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff + * and they tell the kernel that so we have to think of it as two parts. + */ #define EC_HOST_CMD_REGION0 0x800 #define EC_HOST_CMD_REGION1 0x880 #define EC_HOST_CMD_REGION_SIZE 0x80 /* EC command register bit functions */ -#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ -#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */ -#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */ -#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */ -#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */ -#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */ -#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */ +#define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */ +#define EC_LPC_CMDR_PENDING BIT(1) /* Write pending to EC */ +#define EC_LPC_CMDR_BUSY BIT(2) /* EC is busy processing a command */ +#define EC_LPC_CMDR_CMD BIT(3) /* Last host write was a command */ +#define EC_LPC_CMDR_ACPI_BRST BIT(4) /* Burst mode (not used) */ +#define EC_LPC_CMDR_SCI BIT(5) /* SCI event is pending */ +#define EC_LPC_CMDR_SMI BIT(6) /* SMI event is pending */ #define EC_LPC_ADDR_MEMMAP 0x900 #define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ @@ -85,13 +83,15 @@ /* Unused 0x28 - 0x2f */ #define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ /* Unused 0x31 - 0x33 */ -#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ -/* Reserve 0x38 - 0x3f for additional host event-related stuff */ -/* Battery values are all 32 bits */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 64 bits */ +/* Battery values are all 32 bits, unless otherwise noted. */ #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ -#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */ +#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, see below (8-bit) */ +#define EC_MEMMAP_BATT_COUNT 0x4d /* Battery Count (8-bit) */ +#define EC_MEMMAP_BATT_INDEX 0x4e /* Current Battery Data Index (8-bit) */ +/* Unused 0x4f */ #define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ @@ -105,15 +105,24 @@ /* Unused 0x84 - 0x8f */ #define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ /* Unused 0x91 */ -#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometers data 0x92 - 0x9f */ +/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */ +/* 0x94 - 0x99: 1st Accelerometer */ +/* 0x9a - 0x9f: 2nd Accelerometer */ #define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ -/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */ +/* Unused 0xa6 - 0xdf */ +/* + * ACPI is unable to access memory mapped data at or above this offset due to + * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe + * which might be needed by ACPI. + */ +#define EC_MEMMAP_NO_ACPI 0xe0 /* Define the format of the accelerometer mapped memory status byte. */ #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f -#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) -#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT BIT(4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT BIT(7) /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -157,6 +166,8 @@ #define EC_BATT_FLAG_DISCHARGING 0x04 #define EC_BATT_FLAG_CHARGING 0x08 #define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 +/* Set if some of the static/dynamic data is invalid (or outdated). */ +#define EC_BATT_FLAG_INVALID_DATA 0x20 /* Switch flags at EC_MEMMAP_SWITCHES */ #define EC_SWITCH_LID_OPEN 0x01 @@ -182,20 +193,242 @@ #define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ #define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ +/*****************************************************************************/ +/* + * ACPI commands + * + * These are valid ONLY on the ACPI command/data port. + */ + +/* + * ACPI Read Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_DATA bit to set + * - Read value from EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_READ 0x0080 + +/* + * ACPI Write Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write value to EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_WRITE 0x0081 + +/* + * ACPI Burst Enable Embedded Controller + * + * This enables burst mode on the EC to allow the host to issue several + * commands back-to-back. While in this mode, writes to mapped multi-byte + * data are locked out to ensure data consistency. + */ +#define EC_CMD_ACPI_BURST_ENABLE 0x0082 + +/* + * ACPI Burst Disable Embedded Controller + * + * This disables burst mode on the EC and stops preventing EC writes to mapped + * multi-byte data. + */ +#define EC_CMD_ACPI_BURST_DISABLE 0x0083 + +/* + * ACPI Query Embedded Controller + * + * This clears the lowest-order bit in the currently pending host events, and + * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, + * event 0x80000000 = 32), or 0 if no event was pending. + */ +#define EC_CMD_ACPI_QUERY_EVENT 0x0084 + +/* Valid addresses in ACPI memory space, for read/write commands */ + +/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ +#define EC_ACPI_MEM_VERSION 0x00 +/* + * Test location; writing value here updates test compliment byte to (0xff - + * value). + */ +#define EC_ACPI_MEM_TEST 0x01 +/* Test compliment; writes here are ignored. */ +#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + +/* Keyboard backlight brightness percent (0 - 100) */ +#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK BIT(0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK BIT(1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ + +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff + +/* + * Report device orientation + * Bits Definition + * 3:1 Device DPTF Profile Number (DDPN) + * 0 = Reserved for backward compatibility (indicates no valid + * profile number. Host should fall back to using TBMD). + * 1..7 = DPTF Profile number to indicate to host which table needs + * to be loaded. + * 0 Tablet Mode Device Indicator (TBMD) + */ +#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09 +#define EC_ACPI_MEM_TBMD_SHIFT 0 +#define EC_ACPI_MEM_TBMD_MASK 0x1 +#define EC_ACPI_MEM_DDPN_SHIFT 1 +#define EC_ACPI_MEM_DDPN_MASK 0x7 + +/* + * Report device features. Uses the same format as the host command, except: + * + * bit 0 (EC_FEATURE_LIMITED) changes meaning from "EC code has a limited set + * of features", which is of limited interest when the system is already + * interpreting ACPI bytecode, to "EC_FEATURES[0-7] is not supported". Since + * these are supported, it defaults to 0. + * This allows detecting the presence of this field since older versions of + * the EC codebase would simply return 0xff to that unknown address. Check + * FEATURES0 != 0xff (or FEATURES0[0] == 0) to make sure that the other bits + * are valid. + */ +#define EC_ACPI_MEM_DEVICE_FEATURES0 0x0a +#define EC_ACPI_MEM_DEVICE_FEATURES1 0x0b +#define EC_ACPI_MEM_DEVICE_FEATURES2 0x0c +#define EC_ACPI_MEM_DEVICE_FEATURES3 0x0d +#define EC_ACPI_MEM_DEVICE_FEATURES4 0x0e +#define EC_ACPI_MEM_DEVICE_FEATURES5 0x0f +#define EC_ACPI_MEM_DEVICE_FEATURES6 0x10 +#define EC_ACPI_MEM_DEVICE_FEATURES7 0x11 + +#define EC_ACPI_MEM_BATTERY_INDEX 0x12 + +/* + * USB Port Power. Each bit indicates whether the corresponding USB ports' power + * is enabled (1) or disabled (0). + * bit 0 USB port ID 0 + * ... + * bit 7 USB port ID 7 + */ +#define EC_ACPI_MEM_USB_PORT_POWER 0x13 + +/* + * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf. This data + * is read-only from the AP. Added in EC_ACPI_MEM_VERSION 2. + */ +#define EC_ACPI_MEM_MAPPED_BEGIN 0x20 +#define EC_ACPI_MEM_MAPPED_SIZE 0xe0 + +/* Current version of ACPI memory address space */ +#define EC_ACPI_MEM_VERSION_CURRENT 2 + + /* * This header file is used in coreboot both in C and ACPI code. The ACPI code * is pre-processed to handle constants but the ASL compiler is unable to * handle actual C code so keep it separate. */ -#ifndef __ACPI__ + /* - * Define __packed if someone hasn't beat us to it. Linux kernel style - * checking prefers __packed over __attribute__((packed)). + * Attributes for EC request and response packets. Just defining __packed + * results in inefficient assembly code on ARM, if the structure is actually + * 32-bit aligned, as it should be for all buffers. + * + * Be very careful when adding these to existing structures. They will round + * up the structure size to the specified boundary. + * + * Also be very careful to make that if a structure is included in some other + * parent structure that the alignment will still be true given the packing of + * the parent structure. This is particularly important if the sub-structure + * will be passed as a pointer to another function, since that function will + * not know about the misaligment caused by the parent structure's packing. + * + * Also be very careful using __packed - particularly when nesting non-packed + * structures inside packed ones. In fact, DO NOT use __packed directly; + * always use one of these attributes. + * + * Once everything is annotated properly, the following search strings should + * not return ANY matches in this file other than right here: + * + * "__packed" - generates inefficient code; all sub-structs must also be packed + * + * "struct [^_]" - all structs should be annotated, except for structs that are + * members of other structs/unions (and their original declarations should be + * annotated). + */ + +/* + * Packed structures make no assumption about alignment, so they do inefficient + * byte-wise reads. */ -#ifndef __packed -#define __packed __attribute__((packed)) -#endif +#define __ec_align1 __packed +#define __ec_align2 __packed +#define __ec_align4 __packed +#define __ec_align_size1 __packed +#define __ec_align_offset1 __packed +#define __ec_align_offset2 __packed +#define __ec_todo_packed __packed +#define __ec_todo_unpacked + /* LPC command status byte masks */ /* EC has written a byte in the data register and host hasn't read it yet */ @@ -206,7 +439,7 @@ #define EC_LPC_STATUS_PROCESSING 0x04 /* Last write to EC was a command, not data */ #define EC_LPC_STATUS_LAST_CMD 0x08 -/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */ +/* EC is in burst mode */ #define EC_LPC_STATUS_BURST_MODE 0x10 /* SCI event is pending (requesting SCI query) */ #define EC_LPC_STATUS_SCI_PENDING 0x20 @@ -222,7 +455,10 @@ #define EC_LPC_STATUS_BUSY_MASK \ (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) -/* Host command response codes */ +/* + * Host command response codes (16-bit). Note that response codes should be + * stored in a uint16_t rather than directly in a value of this type. + */ enum ec_status { EC_RES_SUCCESS = 0, EC_RES_INVALID_COMMAND = 1, @@ -238,7 +474,13 @@ enum ec_status { EC_RES_OVERFLOW = 11, /* Table / data overflow */ EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ - EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ + EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */ + EC_RES_BUS_ERROR = 15, /* Communications bus error */ + EC_RES_BUSY = 16, /* Up but too busy. Should retry */ + EC_RES_INVALID_HEADER_VERSION = 17, /* Header version invalid */ + EC_RES_INVALID_HEADER_CRC = 18, /* Header CRC invalid */ + EC_RES_INVALID_DATA_CRC = 19, /* Data CRC invalid */ + EC_RES_DUP_UNAVAILABLE = 20, /* Can't resend response */ }; /* @@ -258,7 +500,8 @@ enum host_event_code { EC_HOST_EVENT_BATTERY_CRITICAL = 7, EC_HOST_EVENT_BATTERY = 8, EC_HOST_EVENT_THERMAL_THRESHOLD = 9, - EC_HOST_EVENT_THERMAL_OVERLOAD = 10, + /* Event generated by a device attached to the EC */ + EC_HOST_EVENT_DEVICE = 10, EC_HOST_EVENT_THERMAL = 11, EC_HOST_EVENT_USB_CHARGER = 12, EC_HOST_EVENT_KEY_PRESSED = 13, @@ -285,15 +528,34 @@ enum host_event_code { EC_HOST_EVENT_HANG_DETECT = 20, /* Hang detect logic detected a hang and warm rebooted the AP */ EC_HOST_EVENT_HANG_REBOOT = 21, + /* PD MCU triggering host event */ EC_HOST_EVENT_PD_MCU = 22, - /* EC desires to change state of host-controlled USB mux */ - EC_HOST_EVENT_USB_MUX = 28, + /* Battery Status flags have changed */ + EC_HOST_EVENT_BATTERY_STATUS = 23, + + /* EC encountered a panic, triggering a reset */ + EC_HOST_EVENT_PANIC = 24, + + /* Keyboard fastboot combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25, /* EC RTC event occurred */ EC_HOST_EVENT_RTC = 26, + /* Emulate MKBP event */ + EC_HOST_EVENT_MKBP = 27, + + /* EC desires to change state of host-controlled USB mux */ + EC_HOST_EVENT_USB_MUX = 28, + + /* TABLET/LAPTOP mode or detachable base attach/detach event */ + EC_HOST_EVENT_MODE_CHANGE = 29, + + /* Keyboard recovery combo with hardware reinitialization */ + EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30, + /* * The high bit of the event mask is not used as a host event code. If * it reads back as set, then the entire event mask should be @@ -304,7 +566,7 @@ enum host_event_code { EC_HOST_EVENT_INVALID = 32 }; /* Host event mask */ -#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) +#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1) /** * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS @@ -319,7 +581,7 @@ struct ec_lpc_host_args { uint8_t command_version; uint8_t data_size; uint8_t checksum; -} __packed; +} __ec_align4; /* Flags for ec_lpc_host_args.flags */ /* @@ -329,7 +591,7 @@ struct ec_lpc_host_args { * If EC gets a command and this flag is not set, this is an old-style command. * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with * unknown length. EC must respond with an old-style response (that is, - * withouth setting EC_HOST_ARGS_FLAG_TO_HOST). + * without setting EC_HOST_ARGS_FLAG_TO_HOST). */ #define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 /* @@ -490,7 +752,7 @@ struct ec_host_request { uint8_t command_version; uint8_t reserved; uint16_t data_len; -} __packed; +} __ec_align4; #define EC_HOST_RESPONSE_VERSION 3 @@ -509,18 +771,151 @@ struct ec_host_response { uint16_t result; uint16_t data_len; uint16_t reserved; -} __packed; +} __ec_align4; + +/*****************************************************************************/ + +/* + * Host command protocol V4. + * + * Packets always start with a request or response header. They are followed + * by data_len bytes of data. If the data_crc_present flag is set, the data + * bytes are followed by a CRC-8 of that data, using using x^8 + x^2 + x + 1 + * polynomial. + * + * Host algorithm when sending a request q: + * + * 101) tries_left=(some value, e.g. 3); + * 102) q.seq_num++ + * 103) q.seq_dup=0 + * 104) Calculate q.header_crc. + * 105) Send request q to EC. + * 106) Wait for response r. Go to 201 if received or 301 if timeout. + * + * 201) If r.struct_version != 4, go to 301. + * 202) If r.header_crc mismatches calculated CRC for r header, go to 301. + * 203) If r.data_crc_present and r.data_crc mismatches, go to 301. + * 204) If r.seq_num != q.seq_num, go to 301. + * 205) If r.seq_dup == q.seq_dup, return success. + * 207) If r.seq_dup == 1, go to 301. + * 208) Return error. + * + * 301) If --tries_left <= 0, return error. + * 302) If q.seq_dup == 1, go to 105. + * 303) q.seq_dup = 1 + * 304) Go to 104. + * + * EC algorithm when receiving a request q. + * EC has response buffer r, error buffer e. + * + * 101) If q.struct_version != 4, set e.result = EC_RES_INVALID_HEADER_VERSION + * and go to 301 + * 102) If q.header_crc mismatches calculated CRC, set e.result = + * EC_RES_INVALID_HEADER_CRC and go to 301 + * 103) If q.data_crc_present, calculate data CRC. If that mismatches the CRC + * byte at the end of the packet, set e.result = EC_RES_INVALID_DATA_CRC + * and go to 301. + * 104) If q.seq_dup == 0, go to 201. + * 105) If q.seq_num != r.seq_num, go to 201. + * 106) If q.seq_dup == r.seq_dup, go to 205, else go to 203. + * + * 201) Process request q into response r. + * 202) r.seq_num = q.seq_num + * 203) r.seq_dup = q.seq_dup + * 204) Calculate r.header_crc + * 205) If r.data_len > 0 and data is no longer available, set e.result = + * EC_RES_DUP_UNAVAILABLE and go to 301. + * 206) Send response r. + * + * 301) e.seq_num = q.seq_num + * 302) e.seq_dup = q.seq_dup + * 303) Calculate e.header_crc. + * 304) Send error response e. + */ + +/* Version 4 request from host */ +struct ec_host_request4 { + /* + * bits 0-3: struct_version: Structure version (=4) + * bit 4: is_response: Is response (=0) + * bits 5-6: seq_num: Sequence number + * bit 7: seq_dup: Sequence duplicate flag + */ + uint8_t fields0; + + /* + * bits 0-4: command_version: Command version + * bits 5-6: Reserved (set 0, ignore on read) + * bit 7: data_crc_present: Is data CRC present after data + */ + uint8_t fields1; + + /* Command code (EC_CMD_*) */ + uint16_t command; + + /* Length of data which follows this header (not including data CRC) */ + uint16_t data_len; + + /* Reserved (set 0, ignore on read) */ + uint8_t reserved; + + /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ + uint8_t header_crc; +} __ec_align4; + +/* Version 4 response from EC */ +struct ec_host_response4 { + /* + * bits 0-3: struct_version: Structure version (=4) + * bit 4: is_response: Is response (=1) + * bits 5-6: seq_num: Sequence number + * bit 7: seq_dup: Sequence duplicate flag + */ + uint8_t fields0; + + /* + * bits 0-6: Reserved (set 0, ignore on read) + * bit 7: data_crc_present: Is data CRC present after data + */ + uint8_t fields1; + + /* Result code (EC_RES_*) */ + uint16_t result; + + /* Length of data which follows this header (not including data CRC) */ + uint16_t data_len; + + /* Reserved (set 0, ignore on read) */ + uint8_t reserved; + + /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ + uint8_t header_crc; +} __ec_align4; + +/* Fields in fields0 byte */ +#define EC_PACKET4_0_STRUCT_VERSION_MASK 0x0f +#define EC_PACKET4_0_IS_RESPONSE_MASK 0x10 +#define EC_PACKET4_0_SEQ_NUM_SHIFT 5 +#define EC_PACKET4_0_SEQ_NUM_MASK 0x60 +#define EC_PACKET4_0_SEQ_DUP_MASK 0x80 + +/* Fields in fields1 byte */ +#define EC_PACKET4_1_COMMAND_VERSION_MASK 0x1f /* (request only) */ +#define EC_PACKET4_1_DATA_CRC_PRESENT_MASK 0x80 /*****************************************************************************/ /* * Notes on commands: * * Each command is an 16-bit command value. Commands which take params or - * return response data specify structs for that data. If no struct is + * return response data specify structures for that data. If no structure is * specified, the command does not input or output data, respectively. * Parameter/response length is implicit in the structs. Some underlying * communication protocols (I2C, SPI) may add length or checksum headers, but * those are implementation-dependent and not defined here. + * + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. */ /*****************************************************************************/ @@ -530,7 +925,7 @@ struct ec_host_response { * Get protocol version, used to deal with non-backward compatible protocol * changes. */ -#define EC_CMD_PROTO_VERSION 0x00 +#define EC_CMD_PROTO_VERSION 0x0000 /** * struct ec_response_proto_version - Response to the proto version command. @@ -538,13 +933,13 @@ struct ec_host_response { */ struct ec_response_proto_version { uint32_t version; -} __packed; +} __ec_align4; /* * Hello. This is a simple command to test the EC is responsive to * commands. */ -#define EC_CMD_HELLO 0x01 +#define EC_CMD_HELLO 0x0001 /** * struct ec_params_hello - Parameters to the hello command. @@ -552,7 +947,7 @@ struct ec_response_proto_version { */ struct ec_params_hello { uint32_t in_data; -} __packed; +} __ec_align4; /** * struct ec_response_hello - Response to the hello command. @@ -560,10 +955,10 @@ struct ec_params_hello { */ struct ec_response_hello { uint32_t out_data; -} __packed; +} __ec_align4; /* Get version number */ -#define EC_CMD_GET_VERSION 0x02 +#define EC_CMD_GET_VERSION 0x0002 enum ec_current_image { EC_IMAGE_UNKNOWN = 0, @@ -583,10 +978,10 @@ struct ec_response_get_version { char version_string_rw[32]; char reserved[32]; uint32_t current_image; -} __packed; +} __ec_align4; /* Read test */ -#define EC_CMD_READ_TEST 0x03 +#define EC_CMD_READ_TEST 0x0003 /** * struct ec_params_read_test - Parameters for the read test command. @@ -596,7 +991,7 @@ struct ec_response_get_version { struct ec_params_read_test { uint32_t offset; uint32_t size; -} __packed; +} __ec_align4; /** * struct ec_response_read_test - Response to the read test command. @@ -604,17 +999,17 @@ struct ec_params_read_test { */ struct ec_response_read_test { uint32_t data[32]; -} __packed; +} __ec_align4; /* * Get build information * * Response is null-terminated string. */ -#define EC_CMD_GET_BUILD_INFO 0x04 +#define EC_CMD_GET_BUILD_INFO 0x0004 /* Get chip info */ -#define EC_CMD_GET_CHIP_INFO 0x05 +#define EC_CMD_GET_CHIP_INFO 0x0005 /** * struct ec_response_get_chip_info - Response to the get chip info command. @@ -626,10 +1021,10 @@ struct ec_response_get_chip_info { char vendor[32]; char name[32]; char revision[32]; -} __packed; +} __ec_align4; /* Get board HW version */ -#define EC_CMD_GET_BOARD_VERSION 0x06 +#define EC_CMD_GET_BOARD_VERSION 0x0006 /** * struct ec_response_board_version - Response to the board version command. @@ -637,7 +1032,7 @@ struct ec_response_get_chip_info { */ struct ec_response_board_version { uint16_t board_version; -} __packed; +} __ec_align2; /* * Read memory-mapped data. @@ -647,7 +1042,7 @@ struct ec_response_board_version { * * Response is params.size bytes of data. */ -#define EC_CMD_READ_MEMMAP 0x07 +#define EC_CMD_READ_MEMMAP 0x0007 /** * struct ec_params_read_memmap - Parameters for the read memory map command. @@ -657,10 +1052,10 @@ struct ec_response_board_version { struct ec_params_read_memmap { uint8_t offset; uint8_t size; -} __packed; +} __ec_align1; /* Read versions supported for a command */ -#define EC_CMD_GET_CMD_VERSIONS 0x08 +#define EC_CMD_GET_CMD_VERSIONS 0x0008 /** * struct ec_params_get_cmd_versions - Parameters for the get command versions. @@ -668,7 +1063,7 @@ struct ec_params_read_memmap { */ struct ec_params_get_cmd_versions { uint8_t cmd; -} __packed; +} __ec_align1; /** * struct ec_params_get_cmd_versions_v1 - Parameters for the get command @@ -677,7 +1072,7 @@ struct ec_params_get_cmd_versions { */ struct ec_params_get_cmd_versions_v1 { uint16_t cmd; -} __packed; +} __ec_align2; /** * struct ec_response_get_cmd_version - Response to the get command versions. @@ -686,20 +1081,20 @@ struct ec_params_get_cmd_versions_v1 { */ struct ec_response_get_cmd_versions { uint32_t version_mask; -} __packed; +} __ec_align4; /* - * Check EC communcations status (busy). This is needed on i2c/spi but not + * Check EC communications status (busy). This is needed on i2c/spi but not * on lpc since it has its own out-of-band busy indicator. * * lpc must read the status from the command register. Attempting this on * lpc will overwrite the args/parameter space and corrupt its data. */ -#define EC_CMD_GET_COMMS_STATUS 0x09 +#define EC_CMD_GET_COMMS_STATUS 0x0009 /* Avoid using ec_status which is for return values */ enum ec_comms_status { - EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ + EC_COMMS_STATUS_PROCESSING = BIT(0), /* Processing cmd */ }; /** @@ -709,29 +1104,29 @@ enum ec_comms_status { */ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ -} __packed; +} __ec_align4; /* Fake a variety of responses, purely for testing purposes. */ -#define EC_CMD_TEST_PROTOCOL 0x0a +#define EC_CMD_TEST_PROTOCOL 0x000A /* Tell the EC what to send back to us. */ struct ec_params_test_protocol { uint32_t ec_result; uint32_t ret_len; uint8_t buf[32]; -} __packed; +} __ec_align4; /* Here it comes... */ struct ec_response_test_protocol { uint8_t buf[32]; -} __packed; +} __ec_align4; -/* Get prococol information */ -#define EC_CMD_GET_PROTOCOL_INFO 0x0b +/* Get protocol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x000B /* Flags for ec_response_get_protocol_info.flags */ /* EC_RES_IN_PROGRESS may be returned if a command is slow */ -#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0) /** * struct ec_response_get_protocol_info - Response to the get protocol info. @@ -747,7 +1142,7 @@ struct ec_response_get_protocol_info { uint16_t max_request_packet_size; uint16_t max_response_packet_size; uint32_t flags; -} __packed; +} __ec_align4; /*****************************************************************************/ @@ -765,19 +1160,19 @@ struct ec_response_get_protocol_info { struct ec_params_get_set_value { uint32_t flags; uint32_t value; -} __packed; +} __ec_align4; struct ec_response_get_set_value { uint32_t flags; uint32_t value; -} __packed; +} __ec_align4; -/* More than one command can use these structs to get/set paramters. */ -#define EC_CMD_GSV_PAUSE_IN_S5 0x0c +/* More than one command can use these structs to get/set parameters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x000C /*****************************************************************************/ /* List the features supported by the firmware */ -#define EC_CMD_GET_FEATURES 0x0d +#define EC_CMD_GET_FEATURES 0x000D /* Supported features */ enum ec_feature_code { @@ -884,24 +1279,36 @@ enum ec_feature_code { EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37, /* EC supports audio codec. */ EC_FEATURE_AUDIO_CODEC = 38, - /* EC Supports SCP. */ + /* The MCU is a System Companion Processor (SCP). */ EC_FEATURE_SCP = 39, /* The MCU is an Integrated Sensor Hub */ EC_FEATURE_ISH = 40, }; -#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) -#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32)) +#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) +#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32) struct ec_response_get_features { uint32_t flags[2]; -} __packed; +} __ec_align4; + +/*****************************************************************************/ +/* Get the board's SKU ID from EC */ +#define EC_CMD_GET_SKU_ID 0x000E + +/* Set SKU ID from AP */ +#define EC_CMD_SET_SKU_ID 0x000F + +struct ec_sku_id_info { + uint32_t sku_id; +} __ec_align4; /*****************************************************************************/ /* Flash commands */ /* Get flash info */ -#define EC_CMD_FLASH_INFO 0x10 +#define EC_CMD_FLASH_INFO 0x0010 +#define EC_VER_FLASH_INFO 2 /** * struct ec_response_flash_info - Response to the flash info command. @@ -920,11 +1327,22 @@ struct ec_response_flash_info { uint32_t write_block_size; uint32_t erase_block_size; uint32_t protect_block_size; -} __packed; +} __ec_align4; -/* Flags for version 1+ flash info command */ -/* EC flash erases bits to 0 instead of 1 */ -#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) +/* + * Flags for version 1+ flash info command + * EC flash erases bits to 0 instead of 1. + */ +#define EC_FLASH_INFO_ERASE_TO_0 BIT(0) + +/* + * Flash must be selected for read/write/erase operations to succeed. This may + * be necessary on a chip where write/erase can be corrupted by other board + * activity, or where the chip needs to enable some sort of programming voltage, + * or where the read/write/erase operations require cleanly suspending other + * chip functionality. + */ +#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1) /** * struct ec_response_flash_info_1 - Response to the flash info v1 command. @@ -946,7 +1364,14 @@ struct ec_response_flash_info { * fields following. * * gcc anonymous structs don't seem to get along with the __packed directive; - * if they did we'd define the version 0 struct as a sub-struct of this one. + * if they did we'd define the version 0 structure as a sub-structure of this + * one. + * + * Version 2 supports flash banks of different sizes: + * The caller specified the number of banks it has preallocated + * (num_banks_desc) + * The EC returns the number of banks describing the flash memory. + * It adds banks descriptions up to num_banks_desc. */ struct ec_response_flash_info_1 { /* Version 0 fields; see above for description */ @@ -958,14 +1383,50 @@ struct ec_response_flash_info_1 { /* Version 1 adds these fields: */ uint32_t write_ideal_size; uint32_t flags; -} __packed; +} __ec_align4; + +struct ec_params_flash_info_2 { + /* Number of banks to describe */ + uint16_t num_banks_desc; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +} __ec_align4; + +struct ec_flash_bank { + /* Number of sector is in this bank. */ + uint16_t count; + /* Size in power of 2 of each sector (8 --> 256 bytes) */ + uint8_t size_exp; + /* Minimal write size for the sectors in this bank */ + uint8_t write_size_exp; + /* Erase size for the sectors in this bank */ + uint8_t erase_size_exp; + /* Size for write protection, usually identical to erase size. */ + uint8_t protect_size_exp; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +}; + +struct ec_response_flash_info_2 { + /* Total flash in the EC. */ + uint32_t flash_size; + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; + /* Maximum size to use to send data to write to the EC. */ + uint32_t write_ideal_size; + /* Number of banks present in the EC. */ + uint16_t num_banks_total; + /* Number of banks described in banks array. */ + uint16_t num_banks_desc; + struct ec_flash_bank banks[0]; +} __ec_align4; /* * Read flash * * Response is params.size bytes of data. */ -#define EC_CMD_FLASH_READ 0x11 +#define EC_CMD_FLASH_READ 0x0011 /** * struct ec_params_flash_read - Parameters for the flash read command. @@ -975,10 +1436,10 @@ struct ec_response_flash_info_1 { struct ec_params_flash_read { uint32_t offset; uint32_t size; -} __packed; +} __ec_align4; /* Write flash */ -#define EC_CMD_FLASH_WRITE 0x12 +#define EC_CMD_FLASH_WRITE 0x0012 #define EC_VER_FLASH_WRITE 1 /* Version 0 of the flash command supported only 64 bytes of data */ @@ -993,20 +1454,57 @@ struct ec_params_flash_write { uint32_t offset; uint32_t size; /* Followed by data to write */ -} __packed; +} __ec_align4; /* Erase flash */ -#define EC_CMD_FLASH_ERASE 0x13 +#define EC_CMD_FLASH_ERASE 0x0013 /** - * struct ec_params_flash_erase - Parameters for the flash erase command. + * struct ec_params_flash_erase - Parameters for the flash erase command, v0. * @offset: Byte offset to erase. * @size: Size to erase in bytes. */ struct ec_params_flash_erase { uint32_t offset; uint32_t size; -} __packed; +} __ec_align4; + +/* + * v1 add async erase: + * subcommands can returns: + * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below). + * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary. + * EC_RES_ERROR : other errors. + * EC_RES_BUSY : an existing erase operation is in progress. + * EC_RES_ACCESS_DENIED: Trying to erase running image. + * + * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just + * properly queued. The user must call ERASE_GET_RESULT subcommand to get + * the proper result. + * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send + * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC. + * ERASE_GET_RESULT command may timeout on EC where flash access is not + * permitted while erasing. (For instance, STM32F4). + */ +enum ec_flash_erase_cmd { + FLASH_ERASE_SECTOR, /* Erase and wait for result */ + FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */ + FLASH_ERASE_GET_RESULT, /* Ask for last erase result */ +}; + +/** + * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1. + * @cmd: One of ec_flash_erase_cmd. + * @reserved: Pad byte; currently always contains 0. + * @flag: No flags defined yet; set to 0. + * @params: Same as v0 parameters. + */ +struct ec_params_flash_erase_v1 { + uint8_t cmd; + uint8_t reserved; + uint16_t flag; + struct ec_params_flash_erase params; +} __ec_align4; /* * Get/set flash protection. @@ -1018,31 +1516,40 @@ struct ec_params_flash_erase { * * If mask=0, simply returns the current flags state. */ -#define EC_CMD_FLASH_PROTECT 0x15 +#define EC_CMD_FLASH_PROTECT 0x0015 #define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ /* Flags for flash protection */ /* RO flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0) +#define EC_FLASH_PROTECT_RO_AT_BOOT BIT(0) /* * RO flash code protected now. If this bit is set, at-boot status cannot * be changed. */ -#define EC_FLASH_PROTECT_RO_NOW (1 << 1) +#define EC_FLASH_PROTECT_RO_NOW BIT(1) /* Entire flash code protected now, until reboot. */ -#define EC_FLASH_PROTECT_ALL_NOW (1 << 2) +#define EC_FLASH_PROTECT_ALL_NOW BIT(2) /* Flash write protect GPIO is asserted now */ -#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3) +#define EC_FLASH_PROTECT_GPIO_ASSERTED BIT(3) /* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ -#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4) +#define EC_FLASH_PROTECT_ERROR_STUCK BIT(4) /* * Error - flash protection is in inconsistent state. At least one bank of * flash which should be protected is not protected. Usually fixed by * re-requesting the desired flags, or by a hard reset if that fails. */ -#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) -/* Entile flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) +#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5) +/* Entire flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6) +/* RW flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RW_AT_BOOT BIT(7) +/* RW flash code protected now. */ +#define EC_FLASH_PROTECT_RW_NOW BIT(8) +/* Rollback information flash region protected when the EC boots */ +#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT BIT(9) +/* Rollback information flash region protected now */ +#define EC_FLASH_PROTECT_ROLLBACK_NOW BIT(10) + /** * struct ec_params_flash_protect - Parameters for the flash protect command. @@ -1052,7 +1559,7 @@ struct ec_params_flash_erase { struct ec_params_flash_protect { uint32_t mask; uint32_t flags; -} __packed; +} __ec_align4; /** * struct ec_response_flash_protect - Response to the flash protect command. @@ -1067,7 +1574,7 @@ struct ec_response_flash_protect { uint32_t flags; uint32_t valid_flags; uint32_t writable_flags; -} __packed; +} __ec_align4; /* * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash @@ -1075,22 +1582,37 @@ struct ec_response_flash_protect { */ /* Get the region offset/size */ -#define EC_CMD_FLASH_REGION_INFO 0x16 +#define EC_CMD_FLASH_REGION_INFO 0x0016 #define EC_VER_FLASH_REGION_INFO 1 enum ec_flash_region { /* Region which holds read-only EC image */ EC_FLASH_REGION_RO = 0, - /* Region which holds rewritable EC image */ - EC_FLASH_REGION_RW, + /* + * Region which holds active RW image. 'Active' is different from + * 'running'. Active means 'scheduled-to-run'. Since RO image always + * scheduled to run, active/non-active applies only to RW images (for + * the same reason 'update' applies only to RW images. It's a state of + * an image on a flash. Running image can be RO, RW_A, RW_B but active + * image can only be RW_A or RW_B. In recovery mode, an active RW image + * doesn't enter 'running' state but it's still active on a flash. + */ + EC_FLASH_REGION_ACTIVE, /* * Region which should be write-protected in the factory (a superset of * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Region which holds updatable (non-active) RW image */ + EC_FLASH_REGION_UPDATE, /* Number of regions */ EC_FLASH_REGION_COUNT, }; +/* + * 'RW' is vague if there are multiple RW images; we mean the active one, + * so the old constant is deprecated. + */ +#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE /** * struct ec_params_flash_region_info - Parameters for the flash region info @@ -1099,15 +1621,15 @@ enum ec_flash_region { */ struct ec_params_flash_region_info { uint32_t region; -} __packed; +} __ec_align4; struct ec_response_flash_region_info { uint32_t offset; uint32_t size; -} __packed; +} __ec_align4; /* Read/write VbNvContext */ -#define EC_CMD_VBNV_CONTEXT 0x17 +#define EC_CMD_VBNV_CONTEXT 0x0017 #define EC_VER_VBNV_CONTEXT 1 #define EC_VBNV_BLOCK_SIZE 16 @@ -1119,52 +1641,99 @@ enum ec_vbnvcontext_op { struct ec_params_vbnvcontext { uint32_t op; uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __packed; +} __ec_align4; struct ec_response_vbnvcontext { uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __packed; +} __ec_align4; + + +/* Get SPI flash information */ +#define EC_CMD_FLASH_SPI_INFO 0x0018 + +struct ec_response_flash_spi_info { + /* JEDEC info from command 0x9F (manufacturer, memory type, size) */ + uint8_t jedec[3]; + + /* Pad byte; currently always contains 0 */ + uint8_t reserved0; + + /* Manufacturer / device ID from command 0x90 */ + uint8_t mfr_dev_id[2]; + + /* Status registers from command 0x05 and 0x35 */ + uint8_t sr1, sr2; +} __ec_align1; + + +/* Select flash during flash operations */ +#define EC_CMD_FLASH_SELECT 0x0019 + +/** + * struct ec_params_flash_select - Parameters for the flash select command. + * @select: 1 to select flash, 0 to deselect flash + */ +struct ec_params_flash_select { + uint8_t select; +} __ec_align4; + /*****************************************************************************/ /* PWM commands */ /* Get fan target RPM */ -#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 +#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020 struct ec_response_pwm_get_fan_rpm { uint32_t rpm; -} __packed; +} __ec_align4; /* Set target fan RPM */ -#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21 +#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021 + +/* Version 0 of input params */ +struct ec_params_pwm_set_fan_target_rpm_v0 { + uint32_t rpm; +} __ec_align4; -struct ec_params_pwm_set_fan_target_rpm { +/* Version 1 of input params */ +struct ec_params_pwm_set_fan_target_rpm_v1 { uint32_t rpm; -} __packed; + uint8_t fan_idx; +} __ec_align_size1; /* Get keyboard backlight */ -#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022 struct ec_response_pwm_get_keyboard_backlight { uint8_t percent; uint8_t enabled; -} __packed; +} __ec_align1; /* Set keyboard backlight */ -#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023 struct ec_params_pwm_set_keyboard_backlight { uint8_t percent; -} __packed; +} __ec_align1; /* Set target fan PWM duty cycle */ -#define EC_CMD_PWM_SET_FAN_DUTY 0x24 +#define EC_CMD_PWM_SET_FAN_DUTY 0x0024 -struct ec_params_pwm_set_fan_duty { +/* Version 0 of input params */ +struct ec_params_pwm_set_fan_duty_v0 { uint32_t percent; -} __packed; +} __ec_align4; -#define EC_CMD_PWM_SET_DUTY 0x25 +/* Version 1 of input params */ +struct ec_params_pwm_set_fan_duty_v1 { + uint32_t percent; + uint8_t fan_idx; +} __ec_align_size1; + +#define EC_CMD_PWM_SET_DUTY 0x0025 /* 16 bit duty cycle, 0xffff = 100% */ #define EC_PWM_MAX_DUTY 0xffff @@ -1182,18 +1751,18 @@ struct ec_params_pwm_set_duty { uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ uint8_t pwm_type; /* ec_pwm_type */ uint8_t index; /* Type-specific index, or 0 if unique */ -} __packed; +} __ec_align4; -#define EC_CMD_PWM_GET_DUTY 0x26 +#define EC_CMD_PWM_GET_DUTY 0x0026 struct ec_params_pwm_get_duty { uint8_t pwm_type; /* ec_pwm_type */ uint8_t index; /* Type-specific index, or 0 if unique */ -} __packed; +} __ec_align1; struct ec_response_pwm_get_duty { uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ -} __packed; +} __ec_align2; /*****************************************************************************/ /* @@ -1202,11 +1771,11 @@ struct ec_response_pwm_get_duty { * into a subcommand. We'll make separate structs for subcommands with * different input args, so that we know how much to expect. */ -#define EC_CMD_LIGHTBAR_CMD 0x28 +#define EC_CMD_LIGHTBAR_CMD 0x0028 struct rgb_s { uint8_t r, g, b; -}; +} __ec_todo_unpacked; #define LB_BATTERY_LEVELS 4 @@ -1246,7 +1815,7 @@ struct lightbar_params_v0 { /* Color palette */ struct rgb_s color[8]; /* 0-3 are Google colors */ -} __packed; +} __ec_todo_packed; struct lightbar_params_v1 { /* Timing */ @@ -1259,9 +1828,72 @@ struct lightbar_params_v1 { int32_t s3_sleep_for; int32_t s3_ramp_up; int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; + int32_t tap_tick_delay; + int32_t tap_gate_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __ec_todo_packed; + +/* Lightbar command params v2 + * crbug.com/467716 + * + * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by + * logical groups to make it more manageable ( < 120 bytes). + * + * NOTE: Each of these groups must be less than 120 bytes. + */ + +struct lightbar_params_v2_timing { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; int32_t tap_tick_delay; + int32_t tap_gate_delay; int32_t tap_display_time; +} __ec_todo_packed; +struct lightbar_params_v2_tap { /* Tap-for-battery params */ uint8_t tap_pct_red; uint8_t tap_pct_green; @@ -1269,102 +1901,140 @@ struct lightbar_params_v1 { uint8_t tap_seg_max_on; uint8_t tap_seg_osc; uint8_t tap_idx[3]; +} __ec_todo_packed; +struct lightbar_params_v2_oscillation { /* Oscillation */ uint8_t osc_min[2]; /* AC=0/1 */ uint8_t osc_max[2]; /* AC=0/1 */ uint8_t w_ofs[2]; /* AC=0/1 */ +} __ec_todo_packed; +struct lightbar_params_v2_brightness { /* Brightness limits based on the backlight and AC. */ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ uint8_t bright_bl_on_min[2]; /* AC=0/1 */ uint8_t bright_bl_on_max[2]; /* AC=0/1 */ +} __ec_todo_packed; +struct lightbar_params_v2_thresholds { /* Battery level thresholds */ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; +} __ec_todo_packed; +struct lightbar_params_v2_colors { /* Map [AC][battery_level] to color index */ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + /* Color palette */ struct rgb_s color[8]; /* 0-3 are Google colors */ -} __packed; +} __ec_todo_packed; -/* Lightbar program */ +/* Lightbar program. */ #define EC_LB_PROG_LEN 192 struct lightbar_program { uint8_t size; uint8_t data[EC_LB_PROG_LEN]; -}; +} __ec_todo_unpacked; struct ec_params_lightbar { uint8_t cmd; /* Command (see enum lightbar_command) */ union { - struct { - /* no args */ - } dump, off, on, init, get_seq, get_params_v0, get_params_v1, - version, get_brightness, get_demo, suspend, resume; + /* + * The following commands have no args: + * + * dump, off, on, init, get_seq, get_params_v0, get_params_v1, + * version, get_brightness, get_demo, suspend, resume, + * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc, + * get_params_v2_bright, get_params_v2_thlds, + * get_params_v2_colors + * + * Don't use an empty struct, because C++ hates that. + */ - struct { + struct __ec_todo_unpacked { uint8_t num; } set_brightness, seq, demo; - struct { + struct __ec_todo_unpacked { uint8_t ctrl, reg, value; } reg; - struct { + struct __ec_todo_unpacked { uint8_t led, red, green, blue; } set_rgb; - struct { + struct __ec_todo_unpacked { uint8_t led; } get_rgb; - struct { + struct __ec_todo_unpacked { uint8_t enable; } manual_suspend_ctrl; struct lightbar_params_v0 set_params_v0; struct lightbar_params_v1 set_params_v1; + + struct lightbar_params_v2_timing set_v2par_timing; + struct lightbar_params_v2_tap set_v2par_tap; + struct lightbar_params_v2_oscillation set_v2par_osc; + struct lightbar_params_v2_brightness set_v2par_bright; + struct lightbar_params_v2_thresholds set_v2par_thlds; + struct lightbar_params_v2_colors set_v2par_colors; + struct lightbar_program set_program; }; -} __packed; +} __ec_todo_packed; struct ec_response_lightbar { union { - struct { - struct { + struct __ec_todo_unpacked { + struct __ec_todo_unpacked { uint8_t reg; uint8_t ic0; uint8_t ic1; } vals[23]; } dump; - struct { + struct __ec_todo_unpacked { uint8_t num; } get_seq, get_brightness, get_demo; struct lightbar_params_v0 get_params_v0; struct lightbar_params_v1 get_params_v1; - struct { + + struct lightbar_params_v2_timing get_params_v2_timing; + struct lightbar_params_v2_tap get_params_v2_tap; + struct lightbar_params_v2_oscillation get_params_v2_osc; + struct lightbar_params_v2_brightness get_params_v2_bright; + struct lightbar_params_v2_thresholds get_params_v2_thlds; + struct lightbar_params_v2_colors get_params_v2_colors; + + struct __ec_todo_unpacked { uint32_t num; uint32_t flags; } version; - struct { + struct __ec_todo_unpacked { uint8_t red, green, blue; } get_rgb; - struct { - /* no return params */ - } off, on, init, set_brightness, seq, reg, set_rgb, - demo, set_params_v0, set_params_v1, - set_program, manual_suspend_ctrl, suspend, resume; + /* + * The following commands have no response: + * + * off, on, init, set_brightness, seq, reg, set_rgb, demo, + * set_params_v0, set_params_v1, set_program, + * manual_suspend_ctrl, suspend, resume, set_v2par_timing, + * set_v2par_tap, set_v2par_osc, set_v2par_bright, + * set_v2par_thlds, set_v2par_colors + */ }; -} __packed; +} __ec_todo_packed; /* Lightbar commands */ enum lightbar_command { @@ -1390,13 +2060,25 @@ enum lightbar_command { LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19, LIGHTBAR_CMD_SUSPEND = 20, LIGHTBAR_CMD_RESUME = 21, + LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22, + LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23, + LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24, + LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25, + LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26, + LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27, + LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28, + LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29, + LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30, + LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31, + LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32, + LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33, LIGHTBAR_NUM_CMDS }; /*****************************************************************************/ /* LED control commands */ -#define EC_CMD_LED_CONTROL 0x29 +#define EC_CMD_LED_CONTROL 0x0029 enum ec_led_id { /* LED to indicate battery state of charge */ @@ -1408,13 +2090,21 @@ enum ec_led_id { EC_LED_ID_POWER_LED, /* LED on power adapter or its plug */ EC_LED_ID_ADAPTER_LED, + /* LED to indicate left side */ + EC_LED_ID_LEFT_LED, + /* LED to indicate right side */ + EC_LED_ID_RIGHT_LED, + /* LED to indicate recovery mode with HW_REINIT */ + EC_LED_ID_RECOVERY_HW_REINIT_LED, + /* LED to indicate sysrq debug mode. */ + EC_LED_ID_SYSRQ_DEBUG_LED, EC_LED_ID_COUNT }; /* LED control flags */ -#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */ -#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */ +#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */ +#define EC_LED_FLAGS_AUTO BIT(1) /* Switch LED back to automatic control */ enum ec_led_colors { EC_LED_COLOR_RED = 0, @@ -1422,6 +2112,7 @@ enum ec_led_colors { EC_LED_COLOR_BLUE, EC_LED_COLOR_YELLOW, EC_LED_COLOR_WHITE, + EC_LED_COLOR_AMBER, EC_LED_COLOR_COUNT }; @@ -1431,7 +2122,7 @@ struct ec_params_led_control { uint8_t flags; /* Control flags */ uint8_t brightness[EC_LED_COLOR_COUNT]; -} __packed; +} __ec_align1; struct ec_response_led_control { /* @@ -1442,7 +2133,7 @@ struct ec_response_led_control { * Other values means the LED is control by PWM. */ uint8_t brightness_range[EC_LED_COLOR_COUNT]; -} __packed; +} __ec_align1; /*****************************************************************************/ /* Verified boot commands */ @@ -1453,7 +2144,7 @@ struct ec_response_led_control { */ /* Verified boot hash command */ -#define EC_CMD_VBOOT_HASH 0x2A +#define EC_CMD_VBOOT_HASH 0x002A struct ec_params_vboot_hash { uint8_t cmd; /* enum ec_vboot_hash_cmd */ @@ -1463,7 +2154,7 @@ struct ec_params_vboot_hash { uint32_t offset; /* Offset in flash to hash */ uint32_t size; /* Number of bytes to hash */ uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ -} __packed; +} __ec_align4; struct ec_response_vboot_hash { uint8_t status; /* enum ec_vboot_hash_status */ @@ -1473,7 +2164,7 @@ struct ec_response_vboot_hash { uint32_t offset; /* Offset in flash which was hashed */ uint32_t size; /* Number of bytes hashed */ uint8_t hash_digest[64]; /* Hash digest data */ -} __packed; +} __ec_align4; enum ec_vboot_hash_cmd { EC_VBOOT_HASH_GET = 0, /* Get current hash status */ @@ -1497,15 +2188,22 @@ enum ec_vboot_hash_status { * If one of these is specified, the EC will automatically update offset and * size to the correct values for the specified image (RO or RW). */ -#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe -#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd +#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe +#define EC_VBOOT_HASH_OFFSET_ACTIVE 0xfffffffd +#define EC_VBOOT_HASH_OFFSET_UPDATE 0xfffffffc + +/* + * 'RW' is vague if there are multiple RW images; we mean the active one, + * so the old constant is deprecated. + */ +#define EC_VBOOT_HASH_OFFSET_RW EC_VBOOT_HASH_OFFSET_ACTIVE /*****************************************************************************/ /* * Motion sense commands. We'll make separate structs for sub-commands with * different input args, so that we know how much to expect. */ -#define EC_CMD_MOTION_SENSE_CMD 0x2B +#define EC_CMD_MOTION_SENSE_CMD 0x002B /* Motion sense commands */ enum motionsense_command { @@ -1524,7 +2222,13 @@ enum motionsense_command { /* * EC Rate command is a setter/getter command for the EC sampling rate - * of all motion sensors in milliseconds. + * in milliseconds. + * It is per sensor, the EC run sample task at the minimum of all + * sensors EC_RATE. + * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR + * to collect all the sensor samples. + * For sensor with hardware FIFO, EC_RATE is used as the maximal delay + * to process of all motion sensors in milliseconds. */ MOTIONSENSE_CMD_EC_RATE = 2, @@ -1555,32 +2259,76 @@ enum motionsense_command { MOTIONSENSE_CMD_DATA = 6, /* - * Perform low level calibration.. On sensors that support it, ask to - * do offset calibration. + * Return sensor fifo info. + */ + MOTIONSENSE_CMD_FIFO_INFO = 7, + + /* + * Insert a flush element in the fifo and return sensor fifo info. + * The host can use that element to synchronize its operation. + */ + MOTIONSENSE_CMD_FIFO_FLUSH = 8, + + /* + * Return a portion of the fifo. + */ + MOTIONSENSE_CMD_FIFO_READ = 9, + + /* + * Perform low level calibration. + * On sensors that support it, ask to do offset calibration. */ MOTIONSENSE_CMD_PERFORM_CALIB = 10, /* - * Sensor Offset command is a setter/getter command for the offset used - * for calibration. The offsets can be calculated by the host, or via + * Sensor Offset command is a setter/getter command for the offset + * used for calibration. + * The offsets can be calculated by the host, or via * PERFORM_CALIB command. */ MOTIONSENSE_CMD_SENSOR_OFFSET = 11, - /* Number of motionsense sub-commands. */ - MOTIONSENSE_NUM_CMDS -}; + /* + * List available activities for a MOTION sensor. + * Indicates if they are enabled or disabled. + */ + MOTIONSENSE_CMD_LIST_ACTIVITIES = 12, -enum motionsensor_id { - EC_MOTION_SENSOR_ACCEL_BASE = 0, - EC_MOTION_SENSOR_ACCEL_LID = 1, - EC_MOTION_SENSOR_GYRO = 2, + /* + * Activity management + * Enable/Disable activity recognition. + */ + MOTIONSENSE_CMD_SET_ACTIVITY = 13, /* - * Note, if more sensors are added and this count changes, the padding - * in ec_response_motion_sense dump command must be modified. + * Lid Angle */ - EC_MOTION_SENSOR_COUNT = 3 + MOTIONSENSE_CMD_LID_ANGLE = 14, + + /* + * Allow the FIFO to trigger interrupt via MKBP events. + * By default the FIFO does not send interrupt to process the FIFO + * until the AP is ready or it is coming from a wakeup sensor. + */ + MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15, + + /* + * Spoof the readings of the sensors. The spoofed readings can be set + * to arbitrary values, or will lock to the last read actual values. + */ + MOTIONSENSE_CMD_SPOOF = 16, + + /* Set lid angle for tablet mode detection. */ + MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE = 17, + + /* + * Sensor Scale command is a setter/getter command for the calibration + * scale. + */ + MOTIONSENSE_CMD_SENSOR_SCALE = 18, + + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS }; /* List of motion sensor types. */ @@ -1592,6 +2340,7 @@ enum motionsensor_type { MOTIONSENSE_TYPE_LIGHT = 4, MOTIONSENSE_TYPE_ACTIVITY = 5, MOTIONSENSE_TYPE_BARO = 6, + MOTIONSENSE_TYPE_SYNC = 7, MOTIONSENSE_TYPE_MAX, }; @@ -1599,19 +2348,116 @@ enum motionsensor_type { enum motionsensor_location { MOTIONSENSE_LOC_BASE = 0, MOTIONSENSE_LOC_LID = 1, + MOTIONSENSE_LOC_CAMERA = 2, MOTIONSENSE_LOC_MAX, }; /* List of motion sensor chips. */ enum motionsensor_chip { MOTIONSENSE_CHIP_KXCJ9 = 0, + MOTIONSENSE_CHIP_LSM6DS0 = 1, + MOTIONSENSE_CHIP_BMI160 = 2, + MOTIONSENSE_CHIP_SI1141 = 3, + MOTIONSENSE_CHIP_SI1142 = 4, + MOTIONSENSE_CHIP_SI1143 = 5, + MOTIONSENSE_CHIP_KX022 = 6, + MOTIONSENSE_CHIP_L3GD20H = 7, + MOTIONSENSE_CHIP_BMA255 = 8, + MOTIONSENSE_CHIP_BMP280 = 9, + MOTIONSENSE_CHIP_OPT3001 = 10, + MOTIONSENSE_CHIP_BH1730 = 11, + MOTIONSENSE_CHIP_GPIO = 12, + MOTIONSENSE_CHIP_LIS2DH = 13, + MOTIONSENSE_CHIP_LSM6DSM = 14, + MOTIONSENSE_CHIP_LIS2DE = 15, + MOTIONSENSE_CHIP_LIS2MDL = 16, + MOTIONSENSE_CHIP_LSM6DS3 = 17, + MOTIONSENSE_CHIP_LSM6DSO = 18, + MOTIONSENSE_CHIP_LNG2DM = 19, + MOTIONSENSE_CHIP_MAX, }; +/* List of orientation positions */ +enum motionsensor_orientation { + MOTIONSENSE_ORIENTATION_LANDSCAPE = 0, + MOTIONSENSE_ORIENTATION_PORTRAIT = 1, + MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_PORTRAIT = 2, + MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_LANDSCAPE = 3, + MOTIONSENSE_ORIENTATION_UNKNOWN = 4, +}; + +struct ec_response_motion_sensor_data { + /* Flags for each sensor. */ + uint8_t flags; + /* Sensor number the data comes from. */ + uint8_t sensor_num; + /* Each sensor is up to 3-axis. */ + union { + int16_t data[3]; + struct __ec_todo_packed { + uint16_t reserved; + uint32_t timestamp; + }; + struct __ec_todo_unpacked { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; + int16_t add_info[2]; + }; + }; +} __ec_todo_packed; + +/* Note: used in ec_response_get_next_data */ +struct ec_response_motion_sense_fifo_info { + /* Size of the fifo */ + uint16_t size; + /* Amount of space used in the fifo */ + uint16_t count; + /* Timestamp recorded in us. + * aka accurate timestamp when host event was triggered. + */ + uint32_t timestamp; + /* Total amount of vector lost */ + uint16_t total_lost; + /* Lost events since the last fifo_info, per sensors */ + uint16_t lost[0]; +} __ec_todo_packed; + +struct ec_response_motion_sense_fifo_data { + uint32_t number_data; + struct ec_response_motion_sensor_data data[0]; +} __ec_todo_packed; + +/* List supported activity recognition */ +enum motionsensor_activity { + MOTIONSENSE_ACTIVITY_RESERVED = 0, + MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, + MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, + MOTIONSENSE_ACTIVITY_ORIENTATION = 3, +}; + +struct ec_motion_sense_activity { + uint8_t sensor_num; + uint8_t activity; /* one of enum motionsensor_activity */ + uint8_t enable; /* 1: enable, 0: disable */ + uint8_t reserved; + uint16_t parameters[3]; /* activity dependent parameters */ +} __ec_todo_unpacked; + /* Module flag masks used for the dump sub-command. */ -#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) +#define MOTIONSENSE_MODULE_FLAG_ACTIVE BIT(0) /* Sensor flag masks used for the dump sub-command. */ -#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) +#define MOTIONSENSE_SENSOR_FLAG_PRESENT BIT(0) + +/* + * Flush entry for synchronization. + * data contains time stamp + */ +#define MOTIONSENSE_SENSOR_FLAG_FLUSH BIT(0) +#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP BIT(1) +#define MOTIONSENSE_SENSOR_FLAG_WAKEUP BIT(2) +#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE BIT(3) +#define MOTIONSENSE_SENSOR_FLAG_ODR BIT(4) /* * Send this value for the data element to only perform a read. If you @@ -1622,48 +2468,79 @@ enum motionsensor_chip { #define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000 +/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */ /* Set Calibration information */ -#define MOTION_SENSE_SET_OFFSET 1 +#define MOTION_SENSE_SET_OFFSET BIT(0) -struct ec_response_motion_sensor_data { - /* Flags for each sensor. */ - uint8_t flags; - /* Sensor number the data comes from */ - uint8_t sensor_num; - /* Each sensor is up to 3-axis. */ - union { - int16_t data[3]; - struct { - uint16_t rsvd; - uint32_t timestamp; - } __packed; - struct { - uint8_t activity; /* motionsensor_activity */ - uint8_t state; - int16_t add_info[2]; - }; - }; -} __packed; +/* Default Scale value, factor 1. */ +#define MOTION_SENSE_DEFAULT_SCALE BIT(15) + +#define LID_ANGLE_UNRELIABLE 500 + +enum motionsense_spoof_mode { + /* Disable spoof mode. */ + MOTIONSENSE_SPOOF_MODE_DISABLE = 0, + + /* Enable spoof mode, but use provided component values. */ + MOTIONSENSE_SPOOF_MODE_CUSTOM, + + /* Enable spoof mode, but use the current sensor values. */ + MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT, + + /* Query the current spoof mode status for the sensor. */ + MOTIONSENSE_SPOOF_MODE_QUERY, +}; struct ec_params_motion_sense { uint8_t cmd; union { /* Used for MOTIONSENSE_CMD_DUMP. */ - struct { - /* no args */ + struct __ec_todo_unpacked { + /* + * Maximal number of sensor the host is expecting. + * 0 means the host is only interested in the number + * of sensors controlled by the EC. + */ + uint8_t max_sensor_count; } dump; /* - * Used for MOTIONSENSE_CMD_EC_RATE and - * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE. */ - struct { - /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + struct __ec_todo_unpacked { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. + * kb_wake_angle: angle to wakup AP. + */ int16_t data; - } ec_rate, kb_wake_angle; + } kb_wake_angle; + + /* + * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA + * and MOTIONSENSE_CMD_PERFORM_CALIB. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + } info, info_3, data, fifo_flush, perform_calib, + list_activities; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR + * and MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } ec_rate, sensor_odr, sensor_range; /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ - struct { + struct __ec_todo_packed { uint8_t sensor_num; /* @@ -1689,36 +2566,102 @@ struct ec_params_motion_sense { * Compass: 1/16 uT */ int16_t offset[3]; - } __packed sensor_offset; + } sensor_offset; - /* Used for MOTIONSENSE_CMD_INFO. */ - struct { + /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ + struct __ec_todo_packed { uint8_t sensor_num; - } info; - /* - * Used for MOTIONSENSE_CMD_SENSOR_ODR and - * MOTIONSENSE_CMD_SENSOR_RANGE. - */ - struct { - /* Should be element of enum motionsensor_id. */ - uint8_t sensor_num; + /* + * bit 0: If set (MOTION_SENSE_SET_OFFSET), set + * the calibration information in the EC. + * If unset, just retrieve calibration information. + */ + uint16_t flags; - /* Rounding flag, true for round-up, false for down. */ - uint8_t roundup; + /* + * Temperature at calibration, in units of 0.01 C + * 0x8000: invalid / unknown. + * 0x0: 0C + * 0x7fff: +327.67C + */ + int16_t temp; - uint16_t reserved; + /* + * Scale for calibration: + * By default scale is 1, it is encoded on 16bits: + * 1 = BIT(15) + * ~2 = 0xFFFF + * ~0 = 0. + */ + uint16_t scale[3]; + } sensor_scale; - /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ - int32_t data; - } sensor_odr, sensor_range; + + /* Used for MOTIONSENSE_CMD_FIFO_INFO */ + /* (no params) */ + + /* Used for MOTIONSENSE_CMD_FIFO_READ */ + struct __ec_todo_unpacked { + /* + * Number of expected vector to return. + * EC may return less or 0 if none available. + */ + uint32_t max_data_vector; + } fifo_read; + + struct ec_motion_sense_activity set_activity; + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + /* (no params) */ + + /* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */ + struct __ec_todo_unpacked { + /* + * 1: enable, 0 disable fifo, + * EC_MOTION_SENSE_NO_VALUE return value. + */ + int8_t enable; + } fifo_int_enable; + + /* Used for MOTIONSENSE_CMD_SPOOF */ + struct __ec_todo_packed { + uint8_t sensor_id; + + /* See enum motionsense_spoof_mode. */ + uint8_t spoof_enable; + + /* Ignored, used for alignment. */ + uint8_t reserved; + + /* Individual component values to spoof. */ + int16_t components[3]; + } spoof; + + /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ + struct __ec_todo_unpacked { + /* + * Lid angle threshold for switching between tablet and + * clamshell mode. + */ + int16_t lid_angle; + + /* + * Hysteresis degree to prevent fluctuations between + * clamshell and tablet mode if lid angle keeps + * changing around the threshold. Lid motion driver will + * use lid_angle + hys_degree to trigger tablet mode and + * lid_angle - hys_degree to trigger clamshell mode. + */ + int16_t hys_degree; + } tablet_mode_threshold; }; -} __packed; +} __ec_todo_packed; struct ec_response_motion_sense { union { - /* Used for MOTIONSENSE_CMD_DUMP. */ - struct { + /* Used for MOTIONSENSE_CMD_DUMP */ + struct __ec_todo_unpacked { /* Flags representing the motion sensor module. */ uint8_t module_flags; @@ -1733,7 +2676,7 @@ struct ec_response_motion_sense { } dump; /* Used for MOTIONSENSE_CMD_INFO. */ - struct { + struct __ec_todo_unpacked { /* Should be element of enum motionsensor_type. */ uint8_t type; @@ -1744,37 +2687,129 @@ struct ec_response_motion_sense { uint8_t chip; } info; + /* Used for MOTIONSENSE_CMD_INFO version 3 */ + struct __ec_todo_unpacked { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + + /* Minimum sensor sampling frequency */ + uint32_t min_frequency; + + /* Maximum sensor sampling frequency */ + uint32_t max_frequency; + + /* Max number of sensor events that could be in fifo */ + uint32_t fifo_max_event_count; + } info_3; + /* Used for MOTIONSENSE_CMD_DATA */ struct ec_response_motion_sensor_data data; /* * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, - * MOTIONSENSE_CMD_SENSOR_RANGE, and - * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + * MOTIONSENSE_CMD_SENSOR_RANGE, + * MOTIONSENSE_CMD_KB_WAKE_ANGLE, + * MOTIONSENSE_CMD_FIFO_INT_ENABLE and + * MOTIONSENSE_CMD_SPOOF. */ - struct { + struct __ec_todo_unpacked { /* Current value of the parameter queried. */ int32_t ret; - } ec_rate, sensor_odr, sensor_range, kb_wake_angle; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle, + fifo_int_enable, spoof; - /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ - struct { + /* + * Used for MOTIONSENSE_CMD_SENSOR_OFFSET, + * PERFORM_CALIB. + */ + struct __ec_todo_unpacked { int16_t temp; int16_t offset[3]; } sensor_offset, perform_calib; + + /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ + struct __ec_todo_unpacked { + int16_t temp; + uint16_t scale[3]; + } sensor_scale; + + struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush; + + struct ec_response_motion_sense_fifo_data fifo_read; + + struct __ec_todo_packed { + uint16_t reserved; + uint32_t enabled; + uint32_t disabled; + } list_activities; + + /* No params for set activity */ + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + struct __ec_todo_unpacked { + /* + * Angle between 0 and 360 degree if available, + * LID_ANGLE_UNRELIABLE otherwise. + */ + uint16_t value; + } lid_angle; + + /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ + struct __ec_todo_unpacked { + /* + * Lid angle threshold for switching between tablet and + * clamshell mode. + */ + uint16_t lid_angle; + + /* Hysteresis degree. */ + uint16_t hys_degree; + } tablet_mode_threshold; + }; -} __packed; +} __ec_todo_packed; + +/*****************************************************************************/ +/* Force lid open command */ + +/* Make lid event always open */ +#define EC_CMD_FORCE_LID_OPEN 0x002C + +struct ec_params_force_lid_open { + uint8_t enabled; +} __ec_align1; + +/*****************************************************************************/ +/* Configure the behavior of the power button */ +#define EC_CMD_CONFIG_POWER_BUTTON 0x002D + +enum ec_config_power_button_flags { + /* Enable/Disable power button pulses for x86 devices */ + EC_POWER_BUTTON_ENABLE_PULSE = BIT(0), +}; + +struct ec_params_config_power_button { + /* See enum ec_config_power_button_flags */ + uint8_t flags; +} __ec_align1; /*****************************************************************************/ /* USB charging control commands */ /* Set USB port charging mode */ -#define EC_CMD_USB_CHARGE_SET_MODE 0x30 +#define EC_CMD_USB_CHARGE_SET_MODE 0x0030 struct ec_params_usb_charge_set_mode { uint8_t usb_port_id; - uint8_t mode; -} __packed; + uint8_t mode:7; + uint8_t inhibit_charge:1; +} __ec_align1; /*****************************************************************************/ /* Persistent storage for host */ @@ -1783,35 +2818,35 @@ struct ec_params_usb_charge_set_mode { #define EC_PSTORE_SIZE_MAX 64 /* Get persistent storage info */ -#define EC_CMD_PSTORE_INFO 0x40 +#define EC_CMD_PSTORE_INFO 0x0040 struct ec_response_pstore_info { /* Persistent storage size, in bytes */ uint32_t pstore_size; /* Access size; read/write offset and size must be a multiple of this */ uint32_t access_size; -} __packed; +} __ec_align4; /* * Read persistent storage * * Response is params.size bytes of data. */ -#define EC_CMD_PSTORE_READ 0x41 +#define EC_CMD_PSTORE_READ 0x0041 struct ec_params_pstore_read { uint32_t offset; /* Byte offset to read */ uint32_t size; /* Size to read in bytes */ -} __packed; +} __ec_align4; /* Write persistent storage */ -#define EC_CMD_PSTORE_WRITE 0x42 +#define EC_CMD_PSTORE_WRITE 0x0042 struct ec_params_pstore_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ uint8_t data[EC_PSTORE_SIZE_MAX]; -} __packed; +} __ec_align4; /*****************************************************************************/ /* Real-time clock */ @@ -1819,21 +2854,21 @@ struct ec_params_pstore_write { /* RTC params and response structures */ struct ec_params_rtc { uint32_t time; -} __packed; +} __ec_align4; struct ec_response_rtc { uint32_t time; -} __packed; +} __ec_align4; /* These use ec_response_rtc */ -#define EC_CMD_RTC_GET_VALUE 0x44 -#define EC_CMD_RTC_GET_ALARM 0x45 +#define EC_CMD_RTC_GET_VALUE 0x0044 +#define EC_CMD_RTC_GET_ALARM 0x0045 /* These all use ec_params_rtc */ -#define EC_CMD_RTC_SET_VALUE 0x46 -#define EC_CMD_RTC_SET_ALARM 0x47 +#define EC_CMD_RTC_SET_VALUE 0x0046 +#define EC_CMD_RTC_SET_ALARM 0x0047 -/* Pass as param to SET_ALARM to clear the current alarm */ +/* Pass as time param to SET_ALARM to clear the current alarm */ #define EC_RTC_ALARM_CLEAR 0 /*****************************************************************************/ @@ -1843,8 +2878,8 @@ struct ec_response_rtc { #define EC_PORT80_SIZE_MAX 32 /* Get last port80 code from previous boot */ -#define EC_CMD_PORT80_LAST_BOOT 0x48 -#define EC_CMD_PORT80_READ 0x48 +#define EC_CMD_PORT80_LAST_BOOT 0x0048 +#define EC_CMD_PORT80_READ 0x0048 enum ec_port80_subcmd { EC_PORT80_GET_INFO = 0, @@ -1854,29 +2889,72 @@ enum ec_port80_subcmd { struct ec_params_port80_read { uint16_t subcmd; union { - struct { + struct __ec_todo_unpacked { uint32_t offset; uint32_t num_entries; } read_buffer; }; -} __packed; +} __ec_todo_packed; struct ec_response_port80_read { union { - struct { + struct __ec_todo_unpacked { uint32_t writes; uint32_t history_size; uint32_t last_boot; } get_info; - struct { + struct __ec_todo_unpacked { uint16_t codes[EC_PORT80_SIZE_MAX]; } data; }; -} __packed; +} __ec_todo_packed; struct ec_response_port80_last_boot { uint16_t code; -} __packed; +} __ec_align2; + +/*****************************************************************************/ +/* Temporary secure storage for host verified boot use */ + +/* Number of bytes in a vstore slot */ +#define EC_VSTORE_SLOT_SIZE 64 + +/* Maximum number of vstore slots */ +#define EC_VSTORE_SLOT_MAX 32 + +/* Get persistent storage info */ +#define EC_CMD_VSTORE_INFO 0x0049 +struct ec_response_vstore_info { + /* Indicates which slots are locked */ + uint32_t slot_locked; + /* Total number of slots available */ + uint8_t slot_count; +} __ec_align_size1; + +/* + * Read temporary secure storage + * + * Response is EC_VSTORE_SLOT_SIZE bytes of data. + */ +#define EC_CMD_VSTORE_READ 0x004A + +struct ec_params_vstore_read { + uint8_t slot; /* Slot to read from */ +} __ec_align1; + +struct ec_response_vstore_read { + uint8_t data[EC_VSTORE_SLOT_SIZE]; +} __ec_align1; + +/* + * Write temporary secure storage and lock it. + */ +#define EC_CMD_VSTORE_WRITE 0x004B + +struct ec_params_vstore_write { + uint8_t slot; /* Slot to write to */ + uint8_t data[EC_VSTORE_SLOT_SIZE]; +} __ec_align1; /*****************************************************************************/ /* Thermal engine commands. Note that there are two implementations. We'll @@ -1885,8 +2963,8 @@ struct ec_response_port80_last_boot { * Version 1 separates the CPU thermal limits from the fan control. */ -#define EC_CMD_THERMAL_SET_THRESHOLD 0x50 -#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 +#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051 /* The version 0 structs are opaque. You have to know what they are for * the get/set commands to make any sense. @@ -1897,17 +2975,17 @@ struct ec_params_thermal_set_threshold { uint8_t sensor_type; uint8_t threshold_id; uint16_t value; -} __packed; +} __ec_align2; /* Version 0 - get */ struct ec_params_thermal_get_threshold { uint8_t sensor_type; uint8_t threshold_id; -} __packed; +} __ec_align1; struct ec_response_thermal_get_threshold { uint16_t value; -} __packed; +} __ec_align2; /* The version 1 structs are visible. */ @@ -1919,71 +2997,124 @@ enum ec_temp_thresholds { EC_TEMP_THRESH_COUNT }; -/* Thermal configuration for one temperature sensor. Temps are in degrees K. +/* + * Thermal configuration for one temperature sensor. Temps are in degrees K. * Zero values will be silently ignored by the thermal task. + * + * Set 'temp_host' value allows thermal task to trigger some event with 1 degree + * hysteresis. + * For example, + * temp_host[EC_TEMP_THRESH_HIGH] = 300 K + * temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K + * EC will throttle ap when temperature >= 301 K, and release throttling when + * temperature <= 299 K. + * + * Set 'temp_host_release' value allows thermal task has a custom hysteresis. + * For example, + * temp_host[EC_TEMP_THRESH_HIGH] = 300 K + * temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K + * EC will throttle ap when temperature >= 301 K, and release throttling when + * temperature <= 294 K. + * + * Note that this structure is a sub-structure of + * ec_params_thermal_set_threshold_v1, but maintains its alignment there. */ struct ec_thermal_config { uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */ uint32_t temp_fan_off; /* no active cooling needed */ uint32_t temp_fan_max; /* max active cooling needed */ -} __packed; +} __ec_align4; /* Version 1 - get config for one sensor. */ struct ec_params_thermal_get_threshold_v1 { uint32_t sensor_num; -} __packed; +} __ec_align4; /* This returns a struct ec_thermal_config */ -/* Version 1 - set config for one sensor. - * Use read-modify-write for best results! */ +/* + * Version 1 - set config for one sensor. + * Use read-modify-write for best results! + */ struct ec_params_thermal_set_threshold_v1 { uint32_t sensor_num; struct ec_thermal_config cfg; -} __packed; +} __ec_align4; /* This returns no data */ /****************************************************************************/ /* Toggle automatic fan control */ -#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 +#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 -/* Get TMP006 calibration data */ -#define EC_CMD_TMP006_GET_CALIBRATION 0x53 +/* Version 1 of input params */ +struct ec_params_auto_fan_ctrl_v1 { + uint8_t fan_idx; +} __ec_align1; +/* Get/Set TMP006 calibration data */ +#define EC_CMD_TMP006_GET_CALIBRATION 0x0053 +#define EC_CMD_TMP006_SET_CALIBRATION 0x0054 + +/* + * The original TMP006 calibration only needed four params, but now we need + * more. Since the algorithm is nothing but magic numbers anyway, we'll leave + * the params opaque. The v1 "get" response will include the algorithm number + * and how many params it requires. That way we can change the EC code without + * needing to update this file. We can also use a different algorithm on each + * sensor. + */ + +/* This is the same struct for both v0 and v1. */ struct ec_params_tmp006_get_calibration { uint8_t index; -} __packed; +} __ec_align1; -struct ec_response_tmp006_get_calibration { +/* Version 0 */ +struct ec_response_tmp006_get_calibration_v0 { float s0; float b0; float b1; float b2; -} __packed; - -/* Set TMP006 calibration data */ -#define EC_CMD_TMP006_SET_CALIBRATION 0x54 +} __ec_align4; -struct ec_params_tmp006_set_calibration { +struct ec_params_tmp006_set_calibration_v0 { uint8_t index; - uint8_t reserved[3]; /* Reserved; set 0 */ + uint8_t reserved[3]; float s0; float b0; float b1; float b2; -} __packed; +} __ec_align4; + +/* Version 1 */ +struct ec_response_tmp006_get_calibration_v1 { + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved[2]; + float val[0]; +} __ec_align4; + +struct ec_params_tmp006_set_calibration_v1 { + uint8_t index; + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved; + float val[0]; +} __ec_align4; + /* Read raw TMP006 data */ -#define EC_CMD_TMP006_GET_RAW 0x55 +#define EC_CMD_TMP006_GET_RAW 0x0055 struct ec_params_tmp006_get_raw { uint8_t index; -} __packed; +} __ec_align1; struct ec_response_tmp006_get_raw { int32_t t; /* In 1/100 K */ int32_t v; /* In nV */ -}; +} __ec_align4; /*****************************************************************************/ /* MKBP - Matrix KeyBoard Protocol */ @@ -1998,24 +3129,24 @@ struct ec_response_tmp006_get_raw { * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. */ -#define EC_CMD_MKBP_STATE 0x60 +#define EC_CMD_MKBP_STATE 0x0060 /* * Provide information about various MKBP things. See enum ec_mkbp_info_type. */ -#define EC_CMD_MKBP_INFO 0x61 +#define EC_CMD_MKBP_INFO 0x0061 struct ec_response_mkbp_info { uint32_t rows; uint32_t cols; /* Formerly "switches", which was 0. */ uint8_t reserved; -} __packed; +} __ec_align_size1; struct ec_params_mkbp_info { uint8_t info_type; uint8_t event_type; -} __packed; +} __ec_align1; enum ec_mkbp_info_type { /* @@ -2057,17 +3188,28 @@ enum ec_mkbp_info_type { }; /* Simulate key press */ -#define EC_CMD_MKBP_SIMULATE_KEY 0x62 +#define EC_CMD_MKBP_SIMULATE_KEY 0x0062 struct ec_params_mkbp_simulate_key { uint8_t col; uint8_t row; uint8_t pressed; -} __packed; +} __ec_align1; + +#define EC_CMD_GET_KEYBOARD_ID 0x0063 + +struct ec_response_keyboard_id { + uint32_t keyboard_id; +} __ec_align4; + +enum keyboard_id { + KEYBOARD_ID_UNSUPPORTED = 0, + KEYBOARD_ID_UNREADABLE = 0xffffffff, +}; /* Configure keyboard scanning */ -#define EC_CMD_MKBP_SET_CONFIG 0x64 -#define EC_CMD_MKBP_GET_CONFIG 0x65 +#define EC_CMD_MKBP_SET_CONFIG 0x0064 +#define EC_CMD_MKBP_GET_CONFIG 0x0065 /* flags */ enum mkbp_config_flags { @@ -2075,16 +3217,21 @@ enum mkbp_config_flags { }; enum mkbp_config_valid { - EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, - EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, - EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, - EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, - EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, - EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, - EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, + EC_MKBP_VALID_SCAN_PERIOD = BIT(0), + EC_MKBP_VALID_POLL_TIMEOUT = BIT(1), + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = BIT(3), + EC_MKBP_VALID_OUTPUT_SETTLE = BIT(4), + EC_MKBP_VALID_DEBOUNCE_DOWN = BIT(5), + EC_MKBP_VALID_DEBOUNCE_UP = BIT(6), + EC_MKBP_VALID_FIFO_MAX_DEPTH = BIT(7), }; -/* Configuration for our key scanning algorithm */ +/* + * Configuration for our key scanning algorithm. + * + * Note that this is used as a sub-structure of + * ec_{params/response}_mkbp_get_config. + */ struct ec_mkbp_config { uint32_t valid_mask; /* valid fields */ uint8_t flags; /* some flags (enum mkbp_config_flags) */ @@ -2104,18 +3251,18 @@ struct ec_mkbp_config { uint16_t debounce_up_us; /* time for debounce on key up */ /* maximum depth to allow for fifo (0 = no keyscan output) */ uint8_t fifo_max_depth; -} __packed; +} __ec_align_size1; struct ec_params_mkbp_set_config { struct ec_mkbp_config config; -} __packed; +} __ec_align_size1; struct ec_response_mkbp_get_config { struct ec_mkbp_config config; -} __packed; +} __ec_align_size1; /* Run the key scan emulation */ -#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 +#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066 enum ec_keyscan_seq_cmd { EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ @@ -2130,23 +3277,23 @@ enum ec_collect_flags { * Indicates this scan was processed by the EC. Due to timing, some * scans may be skipped. */ - EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, + EC_KEYSCAN_SEQ_FLAG_DONE = BIT(0), }; struct ec_collect_item { uint8_t flags; /* some flags (enum ec_collect_flags) */ -}; +} __ec_align1; struct ec_params_keyscan_seq_ctrl { uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ union { - struct { + struct __ec_align1 { uint8_t active; /* still active */ uint8_t num_items; /* number of items */ /* Current item being presented */ uint8_t cur_item; } status; - struct { + struct __ec_todo_unpacked { /* * Absolute time for this scan, measured from the * start of the sequence. @@ -2154,29 +3301,40 @@ struct ec_params_keyscan_seq_ctrl { uint32_t time_us; uint8_t scan[0]; /* keyscan data */ } add; - struct { + struct __ec_align1 { uint8_t start_item; /* First item to return */ uint8_t num_items; /* Number of items to return */ } collect; }; -} __packed; +} __ec_todo_packed; struct ec_result_keyscan_seq_ctrl { union { - struct { + struct __ec_todo_unpacked { uint8_t num_items; /* Number of items */ /* Data for each item */ struct ec_collect_item item[0]; } collect; }; -} __packed; +} __ec_todo_packed; /* - * Command for retrieving the next pending MKBP event from the EC device + * Get the next pending MKBP event. * - * The device replies with UNAVAILABLE if there aren't any pending events. + * Returns EC_RES_UNAVAILABLE if there is no event pending. + */ +#define EC_CMD_GET_NEXT_EVENT 0x0067 + +#define EC_MKBP_HAS_MORE_EVENTS_SHIFT 7 + +/* + * We use the most significant bit of the event type to indicate to the host + * that the EC has more MKBP events available to provide. */ -#define EC_CMD_GET_NEXT_EVENT 0x67 +#define EC_MKBP_HAS_MORE_EVENTS BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) + +/* The mask to apply to get the raw event type */ +#define EC_MKBP_EVENT_TYPE_MASK (BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - 1) enum ec_mkbp_event { /* Keyboard matrix changed. The event data is the new matrix state. */ @@ -2194,9 +3352,21 @@ enum ec_mkbp_event { /* The state of the switches have changed. */ EC_MKBP_EVENT_SWITCH = 4, - /* EC sent a sysrq command */ + /* New Fingerprint sensor event, the event data is fp_events bitmap. */ + EC_MKBP_EVENT_FINGERPRINT = 5, + + /* + * Sysrq event: send emulated sysrq. The event data is sysrq, + * corresponding to the key to be pressed. + */ EC_MKBP_EVENT_SYSRQ = 6, + /* + * New 64-bit host event. + * The event data is 8 bytes of host event flags. + */ + EC_MKBP_EVENT_HOST_EVENT64 = 7, + /* Notify the AP that something happened on CEC */ EC_MKBP_EVENT_CEC_EVENT = 8, @@ -2206,65 +3376,140 @@ enum ec_mkbp_event { /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; +BUILD_ASSERT(EC_MKBP_EVENT_COUNT <= EC_MKBP_EVENT_TYPE_MASK); -union ec_response_get_next_data { - uint8_t key_matrix[13]; +union __ec_align_offset1 ec_response_get_next_data { + uint8_t key_matrix[13]; /* Unaligned */ - uint32_t host_event; + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; - uint32_t buttons; - uint32_t switches; - uint32_t sysrq; -} __packed; + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; +}; -union ec_response_get_next_data_v1 { +union __ec_align_offset1 ec_response_get_next_data_v1 { uint8_t key_matrix[16]; + + /* Unaligned */ uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + uint32_t buttons; + uint32_t switches; + + uint32_t fp_events; + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ uint32_t cec_events; + uint8_t cec_message[16]; -} __packed; +}; +BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16); struct ec_response_get_next_event { uint8_t event_type; /* Followed by event data if any */ union ec_response_get_next_data data; -} __packed; +} __ec_align1; struct ec_response_get_next_event_v1 { uint8_t event_type; /* Followed by event data if any */ union ec_response_get_next_data_v1 data; -} __packed; +} __ec_align1; /* Bit indices for buttons and switches.*/ /* Buttons */ #define EC_MKBP_POWER_BUTTON 0 #define EC_MKBP_VOL_UP 1 #define EC_MKBP_VOL_DOWN 2 +#define EC_MKBP_RECOVERY 3 /* Switches */ #define EC_MKBP_LID_OPEN 0 #define EC_MKBP_TABLET_MODE 1 #define EC_MKBP_BASE_ATTACHED 2 +/* Run keyboard factory test scanning */ +#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068 + +struct ec_response_keyboard_factory_test { + uint16_t shorted; /* Keyboard pins are shorted */ +} __ec_align2; + +/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */ +#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF) +#define EC_MKBP_FP_ERRCODE(fp_events) ((fp_events) & 0x0000000F) +#define EC_MKBP_FP_ENROLL_PROGRESS_OFFSET 4 +#define EC_MKBP_FP_ENROLL_PROGRESS(fpe) (((fpe) & 0x00000FF0) \ + >> EC_MKBP_FP_ENROLL_PROGRESS_OFFSET) +#define EC_MKBP_FP_MATCH_IDX_OFFSET 12 +#define EC_MKBP_FP_MATCH_IDX_MASK 0x0000F000 +#define EC_MKBP_FP_MATCH_IDX(fpe) (((fpe) & EC_MKBP_FP_MATCH_IDX_MASK) \ + >> EC_MKBP_FP_MATCH_IDX_OFFSET) +#define EC_MKBP_FP_ENROLL BIT(27) +#define EC_MKBP_FP_MATCH BIT(28) +#define EC_MKBP_FP_FINGER_DOWN BIT(29) +#define EC_MKBP_FP_FINGER_UP BIT(30) +#define EC_MKBP_FP_IMAGE_READY BIT(31) +/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_ENROLL is set */ +#define EC_MKBP_FP_ERR_ENROLL_OK 0 +#define EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY 1 +#define EC_MKBP_FP_ERR_ENROLL_IMMOBILE 2 +#define EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE 3 +#define EC_MKBP_FP_ERR_ENROLL_INTERNAL 5 +/* Can be used to detect if image was usable for enrollment or not. */ +#define EC_MKBP_FP_ERR_ENROLL_PROBLEM_MASK 1 +/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_MATCH is set */ +#define EC_MKBP_FP_ERR_MATCH_NO 0 +#define EC_MKBP_FP_ERR_MATCH_NO_INTERNAL 6 +#define EC_MKBP_FP_ERR_MATCH_NO_TEMPLATES 7 +#define EC_MKBP_FP_ERR_MATCH_NO_LOW_QUALITY 2 +#define EC_MKBP_FP_ERR_MATCH_NO_LOW_COVERAGE 4 +#define EC_MKBP_FP_ERR_MATCH_YES 1 +#define EC_MKBP_FP_ERR_MATCH_YES_UPDATED 3 +#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5 + + /*****************************************************************************/ /* Temperature sensor commands */ /* Read temperature sensor info */ -#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 +#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070 struct ec_params_temp_sensor_get_info { uint8_t id; -} __packed; +} __ec_align1; struct ec_response_temp_sensor_get_info { char sensor_name[32]; uint8_t sensor_type; -} __packed; +} __ec_align1; /*****************************************************************************/ @@ -2277,49 +3522,131 @@ struct ec_response_temp_sensor_get_info { /*****************************************************************************/ /* Host event commands */ + +/* Obsolete. New implementation should use EC_CMD_HOST_EVENT instead */ /* * Host event mask params and response structures, shared by all of the host * event commands below. */ struct ec_params_host_event_mask { uint32_t mask; -} __packed; +} __ec_align4; struct ec_response_host_event_mask { uint32_t mask; -} __packed; +} __ec_align4; /* These all use ec_response_host_event_mask */ -#define EC_CMD_HOST_EVENT_GET_B 0x87 -#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 -#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 -#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d +#define EC_CMD_HOST_EVENT_GET_B 0x0087 +#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088 +#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089 +#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D /* These all use ec_params_host_event_mask */ -#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a -#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b -#define EC_CMD_HOST_EVENT_CLEAR 0x8c -#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e -#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f +#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A +#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B +#define EC_CMD_HOST_EVENT_CLEAR 0x008C +#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E +#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F + +/* + * Unified host event programming interface - Should be used by newer versions + * of BIOS/OS to program host events and masks + */ + +struct ec_params_host_event { + + /* Action requested by host - one of enum ec_host_event_action. */ + uint8_t action; + + /* + * Mask type that the host requested the action on - one of + * enum ec_host_event_mask_type. + */ + uint8_t mask_type; + + /* Set to 0, ignore on read */ + uint16_t reserved; + + /* Value to be used in case of set operations. */ + uint64_t value; +} __ec_align4; + +/* + * Response structure returned by EC_CMD_HOST_EVENT. + * Update the value on a GET request. Set to 0 on GET/CLEAR + */ + +struct ec_response_host_event { + + /* Mask value in case of get operation */ + uint64_t value; +} __ec_align4; + +enum ec_host_event_action { + /* + * params.value is ignored. Value of mask_type populated + * in response.value + */ + EC_HOST_EVENT_GET, + + /* Bits in params.value are set */ + EC_HOST_EVENT_SET, + + /* Bits in params.value are cleared */ + EC_HOST_EVENT_CLEAR, +}; + +enum ec_host_event_mask_type { + + /* Main host event copy */ + EC_HOST_EVENT_MAIN, + + /* Copy B of host events */ + EC_HOST_EVENT_B, + + /* SCI Mask */ + EC_HOST_EVENT_SCI_MASK, + + /* SMI Mask */ + EC_HOST_EVENT_SMI_MASK, + + /* Mask of events that should be always reported in hostevents */ + EC_HOST_EVENT_ALWAYS_REPORT_MASK, + + /* Active wake mask */ + EC_HOST_EVENT_ACTIVE_WAKE_MASK, + + /* Lazy wake mask for S0ix */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX, + + /* Lazy wake mask for S3 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S3, + + /* Lazy wake mask for S5 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S5, +}; + +#define EC_CMD_HOST_EVENT 0x00A4 /*****************************************************************************/ /* Switch commands */ /* Enable/disable LCD backlight */ -#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 +#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090 struct ec_params_switch_enable_backlight { uint8_t enabled; -} __packed; +} __ec_align1; /* Enable/disable WLAN/Bluetooth */ -#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 +#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091 #define EC_VER_SWITCH_ENABLE_WIRELESS 1 /* Version 0 params; no response */ struct ec_params_switch_enable_wireless_v0 { uint8_t enabled; -} __packed; +} __ec_align1; /* Version 1 params */ struct ec_params_switch_enable_wireless_v1 { @@ -2338,7 +3665,7 @@ struct ec_params_switch_enable_wireless_v1 { /* Which flags to copy from suspend_flags */ uint8_t suspend_mask; -} __packed; +} __ec_align1; /* Version 1 response */ struct ec_response_switch_enable_wireless_v1 { @@ -2347,55 +3674,56 @@ struct ec_response_switch_enable_wireless_v1 { /* Flags to leave enabled in S3 */ uint8_t suspend_flags; -} __packed; +} __ec_align1; /*****************************************************************************/ /* GPIO commands. Only available on EC if write protect has been disabled. */ /* Set GPIO output value */ -#define EC_CMD_GPIO_SET 0x92 +#define EC_CMD_GPIO_SET 0x0092 struct ec_params_gpio_set { char name[32]; uint8_t val; -} __packed; +} __ec_align1; /* Get GPIO value */ -#define EC_CMD_GPIO_GET 0x93 +#define EC_CMD_GPIO_GET 0x0093 /* Version 0 of input params and response */ struct ec_params_gpio_get { char name[32]; -} __packed; +} __ec_align1; + struct ec_response_gpio_get { uint8_t val; -} __packed; +} __ec_align1; /* Version 1 of input params and response */ struct ec_params_gpio_get_v1 { uint8_t subcmd; union { - struct { + struct __ec_align1 { char name[32]; } get_value_by_name; - struct { + struct __ec_align1 { uint8_t index; } get_info; }; -} __packed; +} __ec_align1; struct ec_response_gpio_get_v1 { union { - struct { + struct __ec_align1 { uint8_t val; } get_value_by_name, get_count; - struct { + struct __ec_todo_unpacked { uint8_t val; char name[32]; uint32_t flags; } get_info; }; -} __packed; +} __ec_todo_packed; enum gpio_get_subcmd { EC_GPIO_GET_BY_NAME = 0, @@ -2407,25 +3735,28 @@ enum gpio_get_subcmd { /* I2C commands. Only available when flash write protect is unlocked. */ /* - * TODO(crosbug.com/p/23570): These commands are deprecated, and will be - * removed soon. Use EC_CMD_I2C_XFER instead. + * CAUTION: These commands are deprecated, and are not supported anymore in EC + * builds >= 8398.0.0 (see crosbug.com/p/23570). + * + * Use EC_CMD_I2C_PASSTHRU instead. */ /* Read I2C bus */ -#define EC_CMD_I2C_READ 0x94 +#define EC_CMD_I2C_READ 0x0094 struct ec_params_i2c_read { uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t read_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; -} __packed; +} __ec_align_size1; + struct ec_response_i2c_read { uint16_t data; -} __packed; +} __ec_align2; /* Write I2C bus */ -#define EC_CMD_I2C_WRITE 0x95 +#define EC_CMD_I2C_WRITE 0x0095 struct ec_params_i2c_write { uint16_t data; @@ -2433,7 +3764,7 @@ struct ec_params_i2c_write { uint8_t write_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; -} __packed; +} __ec_align_size1; /*****************************************************************************/ /* Charge state commands. Only available when flash write protect unlocked. */ @@ -2441,7 +3772,7 @@ struct ec_params_i2c_write { /* Force charge state machine to stop charging the battery or force it to * discharge the battery. */ -#define EC_CMD_CHARGE_CONTROL 0x96 +#define EC_CMD_CHARGE_CONTROL 0x0096 #define EC_VER_CHARGE_CONTROL 1 enum ec_charge_control_mode { @@ -2452,13 +3783,12 @@ enum ec_charge_control_mode { struct ec_params_charge_control { uint32_t mode; /* enum charge_control_mode */ -} __packed; +} __ec_align4; /*****************************************************************************/ -/* Console commands. Only available when flash write protect is unlocked. */ /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ -#define EC_CMD_CONSOLE_SNAPSHOT 0x97 +#define EC_CMD_CONSOLE_SNAPSHOT 0x0097 /* * Read data from the saved snapshot. If the subcmd parameter is @@ -2472,7 +3802,7 @@ struct ec_params_charge_control { * Response is null-terminated string. Empty string, if there is no more * remaining output. */ -#define EC_CMD_CONSOLE_READ 0x98 +#define EC_CMD_CONSOLE_READ 0x0098 enum ec_console_read_subcmd { CONSOLE_READ_NEXT = 0, @@ -2481,7 +3811,7 @@ enum ec_console_read_subcmd { struct ec_params_console_read_v1 { uint8_t subcmd; /* enum ec_console_read_subcmd */ -} __packed; +} __ec_align1; /*****************************************************************************/ @@ -2492,14 +3822,13 @@ struct ec_params_console_read_v1 { * EC_RES_SUCCESS if the command was successful. * EC_RES_ERROR if the cut off command failed. */ +#define EC_CMD_BATTERY_CUT_OFF 0x0099 -#define EC_CMD_BATTERY_CUT_OFF 0x99 - -#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN BIT(0) struct ec_params_battery_cutoff { uint8_t flags; -} __packed; +} __ec_align1; /*****************************************************************************/ /* USB port mux control. */ @@ -2507,11 +3836,11 @@ struct ec_params_battery_cutoff { /* * Switch USB mux or return to automatic switching. */ -#define EC_CMD_USB_MUX 0x9a +#define EC_CMD_USB_MUX 0x009A struct ec_params_usb_mux { uint8_t mux; -} __packed; +} __ec_align1; /*****************************************************************************/ /* LDOs / FETs control. */ @@ -2524,25 +3853,25 @@ enum ec_ldo_state { /* * Switch on/off a LDO. */ -#define EC_CMD_LDO_SET 0x9b +#define EC_CMD_LDO_SET 0x009B struct ec_params_ldo_set { uint8_t index; uint8_t state; -} __packed; +} __ec_align1; /* * Get LDO state. */ -#define EC_CMD_LDO_GET 0x9c +#define EC_CMD_LDO_GET 0x009C struct ec_params_ldo_get { uint8_t index; -} __packed; +} __ec_align1; struct ec_response_ldo_get { uint8_t state; -} __packed; +} __ec_align1; /*****************************************************************************/ /* Power info. */ @@ -2550,7 +3879,7 @@ struct ec_response_ldo_get { /* * Get power info. */ -#define EC_CMD_POWER_INFO 0x9d +#define EC_CMD_POWER_INFO 0x009D struct ec_response_power_info { uint32_t usb_dev_type; @@ -2558,21 +3887,21 @@ struct ec_response_power_info { uint16_t voltage_system; uint16_t current_system; uint16_t usb_current_limit; -} __packed; +} __ec_align4; /*****************************************************************************/ /* I2C passthru command */ -#define EC_CMD_I2C_PASSTHRU 0x9e +#define EC_CMD_I2C_PASSTHRU 0x009E /* Read data; if not present, message is a write */ -#define EC_I2C_FLAG_READ (1 << 15) +#define EC_I2C_FLAG_READ BIT(15) /* Mask for address */ #define EC_I2C_ADDR_MASK 0x3ff -#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ -#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ +#define EC_I2C_STATUS_NAK BIT(0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT BIT(1) /* Timeout during transfer */ /* Any error */ #define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) @@ -2580,49 +3909,49 @@ struct ec_response_power_info { struct ec_params_i2c_passthru_msg { uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ uint16_t len; /* Number of bytes to read or write */ -} __packed; +} __ec_align2; struct ec_params_i2c_passthru { uint8_t port; /* I2C port number */ uint8_t num_msgs; /* Number of messages */ struct ec_params_i2c_passthru_msg msg[]; /* Data to write for all messages is concatenated here */ -} __packed; +} __ec_align2; struct ec_response_i2c_passthru { uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ uint8_t num_msgs; /* Number of messages processed */ uint8_t data[]; /* Data read by messages concatenated here */ -} __packed; +} __ec_align1; /*****************************************************************************/ /* Power button hang detect */ -#define EC_CMD_HANG_DETECT 0x9f +#define EC_CMD_HANG_DETECT 0x009F /* Reasons to start hang detection timer */ /* Power button pressed */ -#define EC_HANG_START_ON_POWER_PRESS (1 << 0) +#define EC_HANG_START_ON_POWER_PRESS BIT(0) /* Lid closed */ -#define EC_HANG_START_ON_LID_CLOSE (1 << 1) +#define EC_HANG_START_ON_LID_CLOSE BIT(1) /* Lid opened */ -#define EC_HANG_START_ON_LID_OPEN (1 << 2) +#define EC_HANG_START_ON_LID_OPEN BIT(2) /* Start of AP S3->S0 transition (booting or resuming from suspend) */ -#define EC_HANG_START_ON_RESUME (1 << 3) +#define EC_HANG_START_ON_RESUME BIT(3) /* Reasons to cancel hang detection */ /* Power button released */ -#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) +#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8) /* Any host command from AP received */ -#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) +#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9) /* Stop on end of AP S0->S3 transition (suspending or shutting down) */ -#define EC_HANG_STOP_ON_SUSPEND (1 << 10) +#define EC_HANG_STOP_ON_SUSPEND BIT(10) /* * If this flag is set, all the other fields are ignored, and the hang detect @@ -2630,14 +3959,14 @@ struct ec_response_i2c_passthru { * without reconfiguring any of the other hang detect settings. Note that * you must previously have configured the timeouts. */ -#define EC_HANG_START_NOW (1 << 30) +#define EC_HANG_START_NOW BIT(30) /* * If this flag is set, all the other fields are ignored (including * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer * without reconfiguring any of the other hang detect settings. */ -#define EC_HANG_STOP_NOW (1 << 31) +#define EC_HANG_STOP_NOW BIT(31) struct ec_params_hang_detect { /* Flags; see EC_HANG_* */ @@ -2648,7 +3977,7 @@ struct ec_params_hang_detect { /* Timeout in msec before generating warm reboot, if enabled */ uint16_t warm_reboot_timeout_msec; -} __packed; +} __ec_align4; /*****************************************************************************/ /* Commands for battery charging */ @@ -2657,7 +3986,7 @@ struct ec_params_hang_detect { * This is the single catch-all host command to exchange data regarding the * charge state machine (v2 and up). */ -#define EC_CMD_CHARGE_STATE 0xa0 +#define EC_CMD_CHARGE_STATE 0x00A0 /* Subcommands for this host command */ enum charge_state_command { @@ -2677,6 +4006,11 @@ enum charge_state_params { CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ CS_PARAM_CHG_STATUS, /* charger-specific status */ CS_PARAM_CHG_OPTION, /* charger-specific options */ + CS_PARAM_LIMIT_POWER, /* + * Check if power is limited due to + * low battery and / or a weak external + * charger. READ ONLY. + */ /* How many so far? */ CS_NUM_BASE_PARAMS, @@ -2684,30 +4018,39 @@ enum charge_state_params { CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + /* Range for CONFIG_CHARGE_STATE_DEBUG params */ + CS_PARAM_DEBUG_MIN = 0x20000, + CS_PARAM_DEBUG_CTL_MODE = 0x20000, + CS_PARAM_DEBUG_MANUAL_MODE, + CS_PARAM_DEBUG_SEEMS_DEAD, + CS_PARAM_DEBUG_SEEMS_DISCONNECTED, + CS_PARAM_DEBUG_BATT_REMOVED, + CS_PARAM_DEBUG_MANUAL_CURRENT, + CS_PARAM_DEBUG_MANUAL_VOLTAGE, + CS_PARAM_DEBUG_MAX = 0x2ffff, + /* Other custom param ranges go here... */ }; struct ec_params_charge_state { uint8_t cmd; /* enum charge_state_command */ union { - struct { - /* no args */ - } get_state; + /* get_state has no args */ - struct { + struct __ec_todo_unpacked { uint32_t param; /* enum charge_state_param */ } get_param; - struct { + struct __ec_todo_unpacked { uint32_t param; /* param to set */ uint32_t value; /* value to set */ } set_param; }; -} __packed; +} __ec_todo_packed; struct ec_response_charge_state { union { - struct { + struct __ec_align4 { int ac; int chg_voltage; int chg_current; @@ -2715,24 +4058,23 @@ struct ec_response_charge_state { int batt_state_of_charge; } get_state; - struct { + struct __ec_align4 { uint32_t value; } get_param; - struct { - /* no return values */ - } set_param; + + /* set_param returns no args */ }; -} __packed; +} __ec_align4; /* * Set maximum battery charging current. */ -#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 +#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1 struct ec_params_current_limit { uint32_t limit; /* in mA */ -} __packed; +} __ec_align4; /* * Set maximum external voltage / current. @@ -2743,23 +4085,69 @@ struct ec_params_current_limit { struct ec_params_external_power_limit_v1 { uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */ uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */ -} __packed; +} __ec_align2; #define EC_POWER_LIMIT_NONE 0xffff +/* + * Set maximum voltage & current of a dedicated charge port + */ +#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3 + +struct ec_params_dedicated_charger_limit { + uint16_t current_lim; /* in mA */ + uint16_t voltage_lim; /* in mV */ +} __ec_align2; + +/*****************************************************************************/ +/* Hibernate/Deep Sleep Commands */ + +/* Set the delay before going into hibernation. */ +#define EC_CMD_HIBERNATION_DELAY 0x00A8 + +struct ec_params_hibernation_delay { + /* + * Seconds to wait in G3 before hibernate. Pass in 0 to read the + * current settings without changing them. + */ + uint32_t seconds; +} __ec_align4; + +struct ec_response_hibernation_delay { + /* + * The current time in seconds in which the system has been in the G3 + * state. This value is reset if the EC transitions out of G3. + */ + uint32_t time_g3; + + /* + * The current time remaining in seconds until the EC should hibernate. + * This value is also reset if the EC transitions out of G3. + */ + uint32_t time_remaining; + + /* + * The current time in seconds that the EC should wait in G3 before + * hibernating. + */ + uint32_t hibernate_delay; +} __ec_align4; + /* Inform the EC when entering a sleep state */ -#define EC_CMD_HOST_SLEEP_EVENT 0xa9 +#define EC_CMD_HOST_SLEEP_EVENT 0x00A9 enum host_sleep_event { HOST_SLEEP_EVENT_S3_SUSPEND = 1, HOST_SLEEP_EVENT_S3_RESUME = 2, HOST_SLEEP_EVENT_S0IX_SUSPEND = 3, - HOST_SLEEP_EVENT_S0IX_RESUME = 4 + HOST_SLEEP_EVENT_S0IX_RESUME = 4, + /* S3 suspend with additional enabled wake sources */ + HOST_SLEEP_EVENT_S3_WAKEABLE_SUSPEND = 5, }; struct ec_params_host_sleep_event { uint8_t sleep_event; -} __packed; +} __ec_align1; /* * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep @@ -2790,7 +4178,7 @@ struct ec_params_host_sleep_event_v1 { /* No parameters for non-suspend messages. */ }; -} __packed; +} __ec_align2; /* A timeout occurred when this bit is set */ #define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000 @@ -2816,42 +4204,72 @@ struct ec_response_host_sleep_event_v1 { /* No response fields for non-resume messages. */ }; -} __packed; +} __ec_align4; + +/*****************************************************************************/ +/* Device events */ +#define EC_CMD_DEVICE_EVENT 0x00AA + +enum ec_device_event { + EC_DEVICE_EVENT_TRACKPAD, + EC_DEVICE_EVENT_DSP, + EC_DEVICE_EVENT_WIFI, +}; + +enum ec_device_event_param { + /* Get and clear pending device events */ + EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS, + /* Get device event mask */ + EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS, + /* Set device event mask */ + EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS, +}; + +#define EC_DEVICE_EVENT_MASK(event_code) BIT(event_code % 32) + +struct ec_params_device_event { + uint32_t event_mask; + uint8_t param; +} __ec_align_size1; + +struct ec_response_device_event { + uint32_t event_mask; +} __ec_align4; /*****************************************************************************/ /* Smart battery pass-through */ /* Get / Set 16-bit smart battery registers */ -#define EC_CMD_SB_READ_WORD 0xb0 -#define EC_CMD_SB_WRITE_WORD 0xb1 +#define EC_CMD_SB_READ_WORD 0x00B0 +#define EC_CMD_SB_WRITE_WORD 0x00B1 /* Get / Set string smart battery parameters * formatted as SMBUS "block". */ -#define EC_CMD_SB_READ_BLOCK 0xb2 -#define EC_CMD_SB_WRITE_BLOCK 0xb3 +#define EC_CMD_SB_READ_BLOCK 0x00B2 +#define EC_CMD_SB_WRITE_BLOCK 0x00B3 struct ec_params_sb_rd { uint8_t reg; -} __packed; +} __ec_align1; struct ec_response_sb_rd_word { uint16_t value; -} __packed; +} __ec_align2; struct ec_params_sb_wr_word { uint8_t reg; uint16_t value; -} __packed; +} __ec_align1; struct ec_response_sb_rd_block { uint8_t data[32]; -} __packed; +} __ec_align1; struct ec_params_sb_wr_block { uint8_t reg; uint16_t data[32]; -} __packed; +} __ec_align1; /*****************************************************************************/ /* Battery vendor parameters @@ -2862,7 +4280,7 @@ struct ec_params_sb_wr_block { * requested value. */ -#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 +#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4 enum ec_battery_vendor_param_mode { BATTERY_VENDOR_PARAM_MODE_GET = 0, @@ -2873,16 +4291,187 @@ struct ec_params_battery_vendor_param { uint32_t param; uint32_t value; uint8_t mode; -} __packed; +} __ec_align_size1; struct ec_response_battery_vendor_param { uint32_t value; -} __packed; +} __ec_align4; /*****************************************************************************/ +/* + * Smart Battery Firmware Update Commands + */ +#define EC_CMD_SB_FW_UPDATE 0x00B5 + +enum ec_sb_fw_update_subcmd { + EC_SB_FW_UPDATE_PREPARE = 0x0, + EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */ + EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */ + EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */ + EC_SB_FW_UPDATE_END = 0x4, + EC_SB_FW_UPDATE_STATUS = 0x5, + EC_SB_FW_UPDATE_PROTECT = 0x6, + EC_SB_FW_UPDATE_MAX = 0x7, +}; + +#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32 +#define SB_FW_UPDATE_CMD_STATUS_SIZE 2 +#define SB_FW_UPDATE_CMD_INFO_SIZE 8 + +struct ec_sb_fw_update_header { + uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */ + uint16_t fw_id; /* firmware id */ +} __ec_align4; + +struct ec_params_sb_fw_update { + struct ec_sb_fw_update_header hdr; + union { + /* EC_SB_FW_UPDATE_PREPARE = 0x0 */ + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + /* EC_SB_FW_UPDATE_BEGIN = 0x2 */ + /* EC_SB_FW_UPDATE_END = 0x4 */ + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + /* EC_SB_FW_UPDATE_PROTECT = 0x6 */ + /* Those have no args */ + + /* EC_SB_FW_UPDATE_WRITE = 0x3 */ + struct __ec_align4 { + uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE]; + } write; + }; +} __ec_align4; + +struct ec_response_sb_fw_update { + union { + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE]; + } info; + + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE]; + } status; + }; +} __ec_align1; + +/* + * Entering Verified Boot Mode Command + * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. + * Valid Modes are: normal, developer, and recovery. + */ +#define EC_CMD_ENTERING_MODE 0x00B6 + +struct ec_params_entering_mode { + int vboot_mode; +} __ec_align4; + +#define VBOOT_MODE_NORMAL 0 +#define VBOOT_MODE_DEVELOPER 1 +#define VBOOT_MODE_RECOVERY 2 + +/*****************************************************************************/ +/* + * I2C passthru protection command: Protects I2C tunnels against access on + * certain addresses (board-specific). + */ +#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7 + +enum ec_i2c_passthru_protect_subcmd { + EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0, + EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1, +}; + +struct ec_params_i2c_passthru_protect { + uint8_t subcmd; + uint8_t port; /* I2C port number */ +} __ec_align1; + +struct ec_response_i2c_passthru_protect { + uint8_t status; /* Status flags (0: unlocked, 1: locked) */ +} __ec_align1; + + +/*****************************************************************************/ +/* + * HDMI CEC commands + * + * These commands are for sending and receiving message via HDMI CEC + */ + +#define MAX_CEC_MSG_LEN 16 + +/* CEC message from the AP to be written on the CEC bus */ +#define EC_CMD_CEC_WRITE_MSG 0x00B8 + +/** + * struct ec_params_cec_write - Message to write to the CEC bus + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write { + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* Set various CEC parameters */ +#define EC_CMD_CEC_SET 0x00BA + +/** + * struct ec_params_cec_set - CEC parameters set + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC + * or 1 to enable CEC functionality, in case cmd is + * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical + * address between 0 and 15 or 0xff to unregister + */ +struct ec_params_cec_set { + uint8_t cmd; /* enum cec_command */ + uint8_t val; +} __ec_align1; + +/* Read various CEC parameters */ +#define EC_CMD_CEC_GET 0x00BB + +/** + * struct ec_params_cec_get - CEC parameters get + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + */ +struct ec_params_cec_get { + uint8_t cmd; /* enum cec_command */ +} __ec_align1; + +/** + * struct ec_response_cec_get - CEC parameters get response + * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is + * disabled or 1 if CEC functionality is enabled, + * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the + * configured logical address between 0 and 15 or 0xff if unregistered + */ +struct ec_response_cec_get { + uint8_t val; +} __ec_align1; + +/* CEC parameters command */ +enum cec_command { + /* CEC reading, writing and events enable */ + CEC_CMD_ENABLE, + /* CEC logical address */ + CEC_CMD_LOGICAL_ADDRESS, +}; + +/* Events from CEC to AP */ +enum mkbp_cec_event { + /* Outgoing message was acknowledged by a follower */ + EC_MKBP_CEC_SEND_OK = BIT(0), + /* Outgoing message was not acknowledged */ + EC_MKBP_CEC_SEND_FAILED = BIT(1), +}; + +/*****************************************************************************/ + /* Commands for I2S recording on audio codec. */ #define EC_CMD_CODEC_I2S 0x00BC +#define EC_WOV_I2S_SAMPLE_RATE 48000 enum ec_codec_i2s_subcmd { EC_CODEC_SET_SAMPLE_DEPTH = 0x0, @@ -2892,6 +4481,7 @@ enum ec_codec_i2s_subcmd { EC_CODEC_I2S_SET_CONFIG = 0x4, EC_CODEC_I2S_SET_TDM_CONFIG = 0x5, EC_CODEC_I2S_SET_BCLK = 0x6, + EC_CODEC_I2S_SUBCMD_COUNT = 0x7, }; enum ec_sample_depth_value { @@ -2908,10 +4498,23 @@ enum ec_i2s_config { EC_DAI_FMT_PCM_TDM = 5, }; -struct ec_param_codec_i2s { - /* - * enum ec_codec_i2s_subcmd - */ +/* + * For subcommand EC_CODEC_GET_GAIN. + */ +struct __ec_align1 ec_codec_i2s_gain { + uint8_t left; + uint8_t right; +}; + +struct __ec_todo_unpacked ec_param_codec_i2s_tdm { + int16_t ch0_delay; /* 0 to 496 */ + int16_t ch1_delay; /* -1 to 496 */ + uint8_t adjacent_to_ch0; + uint8_t adjacent_to_ch1; +}; + +struct __ec_todo_packed ec_param_codec_i2s { + /* enum ec_codec_i2s_subcmd */ uint8_t cmd; union { /* @@ -2924,10 +4527,7 @@ struct ec_param_codec_i2s { * EC_CODEC_SET_GAIN * Value should be 0~43 for both channels. */ - struct ec_param_codec_i2s_set_gain { - uint8_t left; - uint8_t right; - } __packed gain; + struct ec_codec_i2s_gain gain; /* * EC_CODEC_I2S_ENABLE @@ -2936,7 +4536,7 @@ struct ec_param_codec_i2s { uint8_t i2s_enable; /* - * EC_CODEC_I2S_SET_COFNIG + * EC_CODEC_I2S_SET_CONFIG * Value should be one of ec_i2s_config. */ uint8_t i2s_config; @@ -2945,33 +4545,15 @@ struct ec_param_codec_i2s { * EC_CODEC_I2S_SET_TDM_CONFIG * Value should be one of ec_i2s_config. */ - struct ec_param_codec_i2s_tdm { - /* - * 0 to 496 - */ - int16_t ch0_delay; - /* - * -1 to 496 - */ - int16_t ch1_delay; - uint8_t adjacent_to_ch0; - uint8_t adjacent_to_ch1; - } __packed tdm_param; + struct ec_param_codec_i2s_tdm tdm_param; /* * EC_CODEC_I2S_SET_BCLK */ uint32_t bclk; }; -} __packed; +}; -/* - * For subcommand EC_CODEC_GET_GAIN. - */ -struct ec_response_codec_gain { - uint8_t left; - uint8_t right; -} __packed; /*****************************************************************************/ /* System commands */ @@ -2980,27 +4562,29 @@ struct ec_response_codec_gain { * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't * necessarily reboot the EC. Rename to "image" or something similar? */ -#define EC_CMD_REBOOT_EC 0xd2 +#define EC_CMD_REBOOT_EC 0x00D2 /* Command */ enum ec_reboot_cmd { EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ - EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ + EC_REBOOT_JUMP_RW = 2, /* Jump to active RW without rebooting */ /* (command 3 was jump to RW-B) */ EC_REBOOT_COLD = 4, /* Cold-reboot */ EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ - EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */ + EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */ + EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */ }; /* Flags for ec_params_reboot_ec.reboot_flags */ -#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ -#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ +#define EC_REBOOT_FLAG_RESERVED0 BIT(0) /* Was recovery request */ +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1) /* Reboot after AP shutdown */ +#define EC_REBOOT_FLAG_SWITCH_RW_SLOT BIT(2) /* Switch RW slot */ struct ec_params_reboot_ec { uint8_t cmd; /* enum ec_reboot_cmd */ uint8_t flags; /* See EC_REBOOT_FLAG_* */ -} __packed; +} __ec_align1; /* * Get information on last EC panic. @@ -3008,196 +4592,7 @@ struct ec_params_reboot_ec { * Returns variable-length platform-dependent panic information. See panic.h * for details. */ -#define EC_CMD_GET_PANIC_INFO 0xd3 - -/*****************************************************************************/ -/* - * ACPI commands - * - * These are valid ONLY on the ACPI command/data port. - */ - -/* - * ACPI Read Embedded Controller - * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). - * - * Use the following sequence: - * - * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_DATA bit to set - * - Read value from EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_READ 0x80 - -/* - * ACPI Write Embedded Controller - * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). - * - * Use the following sequence: - * - * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write value to EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_WRITE 0x81 - -/* - * ACPI Query Embedded Controller - * - * This clears the lowest-order bit in the currently pending host events, and - * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, - * event 0x80000000 = 32), or 0 if no event was pending. - */ -#define EC_CMD_ACPI_QUERY_EVENT 0x84 - -/* Valid addresses in ACPI memory space, for read/write commands */ - -/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ -#define EC_ACPI_MEM_VERSION 0x00 -/* - * Test location; writing value here updates test compliment byte to (0xff - - * value). - */ -#define EC_ACPI_MEM_TEST 0x01 -/* Test compliment; writes here are ignored. */ -#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 - -/* Keyboard backlight brightness percent (0 - 100) */ -#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 -/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ -#define EC_ACPI_MEM_FAN_DUTY 0x04 - -/* - * DPTF temp thresholds. Any of the EC's temp sensors can have up to two - * independent thresholds attached to them. The current value of the ID - * register determines which sensor is affected by the THRESHOLD and COMMIT - * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme - * as the memory-mapped sensors. The COMMIT register applies those settings. - * - * The spec does not mandate any way to read back the threshold settings - * themselves, but when a threshold is crossed the AP needs a way to determine - * which sensor(s) are responsible. Each reading of the ID register clears and - * returns one sensor ID that has crossed one of its threshold (in either - * direction) since the last read. A value of 0xFF means "no new thresholds - * have tripped". Setting or enabling the thresholds for a sensor will clear - * the unread event count for that sensor. - */ -#define EC_ACPI_MEM_TEMP_ID 0x05 -#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 -#define EC_ACPI_MEM_TEMP_COMMIT 0x07 -/* - * Here are the bits for the COMMIT register: - * bit 0 selects the threshold index for the chosen sensor (0/1) - * bit 1 enables/disables the selected threshold (0 = off, 1 = on) - * Each write to the commit register affects one threshold. - */ -#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) -#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) -/* - * Example: - * - * Set the thresholds for sensor 2 to 50 C and 60 C: - * write 2 to [0x05] -- select temp sensor 2 - * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET - * write 0x2 to [0x07] -- enable threshold 0 with this value - * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET - * write 0x3 to [0x07] -- enable threshold 1 with this value - * - * Disable the 60 C threshold, leaving the 50 C threshold unchanged: - * write 2 to [0x05] -- select temp sensor 2 - * write 0x1 to [0x07] -- disable threshold 1 - */ - -/* DPTF battery charging current limit */ -#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 - -/* Charging limit is specified in 64 mA steps */ -#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 -/* Value to disable DPTF battery charging limit */ -#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff - -/* Current version of ACPI memory address space */ -#define EC_ACPI_MEM_VERSION_CURRENT 1 - - -/*****************************************************************************/ -/* - * HDMI CEC commands - * - * These commands are for sending and receiving message via HDMI CEC - */ -#define EC_MAX_CEC_MSG_LEN 16 - -/* CEC message from the AP to be written on the CEC bus */ -#define EC_CMD_CEC_WRITE_MSG 0x00B8 - -/** - * struct ec_params_cec_write - Message to write to the CEC bus - * @msg: message content to write to the CEC bus - */ -struct ec_params_cec_write { - uint8_t msg[EC_MAX_CEC_MSG_LEN]; -} __packed; - -/* Set various CEC parameters */ -#define EC_CMD_CEC_SET 0x00BA - -/** - * struct ec_params_cec_set - CEC parameters set - * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS - * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC - * or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS, - * this field encodes the requested logical address between 0 and 15 - * or 0xff to unregister - */ -struct ec_params_cec_set { - uint8_t cmd; /* enum cec_command */ - uint8_t val; -} __packed; - -/* Read various CEC parameters */ -#define EC_CMD_CEC_GET 0x00BB - -/** - * struct ec_params_cec_get - CEC parameters get - * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS - */ -struct ec_params_cec_get { - uint8_t cmd; /* enum cec_command */ -} __packed; - -/** - * struct ec_response_cec_get - CEC parameters get response - * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is - * disabled or 1 if CEC functionality is enabled, - * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the - * configured logical address between 0 and 15 or 0xff if unregistered - */ -struct ec_response_cec_get { - uint8_t val; -} __packed; - -/* CEC parameters command */ -enum ec_cec_command { - /* CEC reading, writing and events enable */ - CEC_CMD_ENABLE, - /* CEC logical address */ - CEC_CMD_LOGICAL_ADDRESS, -}; - -/* Events from CEC to AP */ -enum mkbp_cec_event { - /* Outgoing message was acknowledged by a follower */ - EC_MKBP_CEC_SEND_OK = BIT(0), - /* Outgoing message was not acknowledged */ - EC_MKBP_CEC_SEND_FAILED = BIT(1), -}; +#define EC_CMD_GET_PANIC_INFO 0x00D3 /*****************************************************************************/ /* @@ -3216,7 +4611,7 @@ enum mkbp_cec_event { * * Use EC_CMD_REBOOT_EC to reboot the EC more politely. */ -#define EC_CMD_REBOOT 0xd1 /* Think "die" */ +#define EC_CMD_REBOOT 0x00D1 /* Think "die" */ /* * Resend last response (not supported on LPC). @@ -3225,7 +4620,7 @@ enum mkbp_cec_event { * there was no previous command, or the previous command's response was too * big to save. */ -#define EC_CMD_RESEND_RESPONSE 0xdb +#define EC_CMD_RESEND_RESPONSE 0x00DB /* * This header byte on a command indicate version 0. Any header byte less @@ -3237,9 +4632,7 @@ enum mkbp_cec_event { * * The old EC interface must not use commands 0xdc or higher. */ -#define EC_CMD_VERSION0 0xdc - -#endif /* !__ACPI__ */ +#define EC_CMD_VERSION0 0x00DC /*****************************************************************************/ /* @@ -3249,21 +4642,56 @@ enum mkbp_cec_event { */ /* EC to PD MCU exchange status command */ -#define EC_CMD_PD_EXCHANGE_STATUS 0x100 +#define EC_CMD_PD_EXCHANGE_STATUS 0x0100 +#define EC_VER_PD_EXCHANGE_STATUS 2 + +enum pd_charge_state { + PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */ + PD_CHARGE_NONE, /* No charging allowed */ + PD_CHARGE_5V, /* 5V charging only */ + PD_CHARGE_MAX /* Charge at max voltage */ +}; /* Status of EC being sent to PD */ +#define EC_STATUS_HIBERNATING BIT(0) + struct ec_params_pd_status { - int8_t batt_soc; /* battery state of charge */ -} __packed; + uint8_t status; /* EC status */ + int8_t batt_soc; /* battery state of charge */ + uint8_t charge_state; /* charging state (from enum pd_charge_state) */ +} __ec_align1; /* Status of PD being sent back to EC */ +#define PD_STATUS_HOST_EVENT BIT(0) /* Forward host event to AP */ +#define PD_STATUS_IN_RW BIT(1) /* Running RW image */ +#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */ +#define PD_STATUS_TCPC_ALERT_0 BIT(3) /* Alert active in port 0 TCPC */ +#define PD_STATUS_TCPC_ALERT_1 BIT(4) /* Alert active in port 1 TCPC */ +#define PD_STATUS_TCPC_ALERT_2 BIT(5) /* Alert active in port 2 TCPC */ +#define PD_STATUS_TCPC_ALERT_3 BIT(6) /* Alert active in port 3 TCPC */ +#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \ + PD_STATUS_TCPC_ALERT_1 | \ + PD_STATUS_HOST_EVENT) struct ec_response_pd_status { - int8_t status; /* PD MCU status */ - uint32_t curr_lim_ma; /* input current limit */ -} __packed; + uint32_t curr_lim_ma; /* input current limit */ + uint16_t status; /* PD MCU status */ + int8_t active_charge_port; /* active charging port */ +} __ec_align_size1; + +/* AP to PD MCU host event status command, cleared on read */ +#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104 + +/* PD MCU host event status bits */ +#define PD_EVENT_UPDATE_DEVICE BIT(0) +#define PD_EVENT_POWER_CHANGE BIT(1) +#define PD_EVENT_IDENTITY_RECEIVED BIT(2) +#define PD_EVENT_DATA_SWAP BIT(3) +struct ec_response_host_event_status { + uint32_t status; /* PD MCU host event status */ +} __ec_align4; /* Set USB type-C port role and muxes */ -#define EC_CMD_USB_PD_CONTROL 0x101 +#define EC_CMD_USB_PD_CONTROL 0x0101 enum usb_pd_control_role { USB_PD_CTRL_ROLE_NO_CHANGE = 0, @@ -3271,6 +4699,8 @@ enum usb_pd_control_role { USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, USB_PD_CTRL_ROLE_FORCE_SINK = 3, USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, + USB_PD_CTRL_ROLE_FREEZE = 5, + USB_PD_CTRL_ROLE_COUNT }; enum usb_pd_control_mux { @@ -3280,6 +4710,7 @@ enum usb_pd_control_mux { USB_PD_CTRL_MUX_DP = 3, USB_PD_CTRL_MUX_DOCK = 4, USB_PD_CTRL_MUX_AUTO = 5, + USB_PD_CTRL_MUX_COUNT }; enum usb_pd_control_swap { @@ -3295,11 +4726,11 @@ struct ec_params_usb_pd_control { uint8_t role; uint8_t mux; uint8_t swap; -} __packed; +} __ec_align1; -#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */ -#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */ -#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */ +#define PD_CTRL_RESP_ENABLED_COMMS BIT(0) /* Communication enabled */ +#define PD_CTRL_RESP_ENABLED_CONNECTED BIT(1) /* Device connected */ +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */ #define PD_CTRL_RESP_ROLE_POWER BIT(0) /* 0=SNK/1=SRC */ #define PD_CTRL_RESP_ROLE_DATA BIT(1) /* 0=UFP/1=DFP */ @@ -3309,28 +4740,54 @@ struct ec_params_usb_pd_control { #define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */ #define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */ +struct ec_response_usb_pd_control { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + uint8_t state; +} __ec_align1; + struct ec_response_usb_pd_control_v1 { uint8_t enabled; uint8_t role; uint8_t polarity; char state[32]; -} __packed; +} __ec_align1; + +/* Values representing usbc PD CC state */ +#define USBC_PD_CC_NONE 0 /* No accessory connected */ +#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */ +#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */ +#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */ +#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ +#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ + +struct ec_response_usb_pd_control_v2 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; + uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */ + uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ + /* CL:1500994 Current cable type */ + uint8_t reserved_cable_type; +} __ec_align1; -#define EC_CMD_USB_PD_PORTS 0x102 +#define EC_CMD_USB_PD_PORTS 0x0102 /* Maximum number of PD ports on a device, num_ports will be <= this */ #define EC_USB_PD_MAX_PORTS 8 struct ec_response_usb_pd_ports { uint8_t num_ports; -} __packed; +} __ec_align1; -#define EC_CMD_USB_PD_POWER_INFO 0x103 +#define EC_CMD_USB_PD_POWER_INFO 0x0103 #define PD_POWER_CHARGING_PORT 0xff struct ec_params_usb_pd_power_info { uint8_t port; -} __packed; +} __ec_align1; enum usb_chg_type { USB_CHG_TYPE_NONE, @@ -3343,6 +4800,7 @@ enum usb_chg_type { USB_CHG_TYPE_OTHER, USB_CHG_TYPE_VBUS, USB_CHG_TYPE_UNKNOWN, + USB_CHG_TYPE_DEDICATED, }; enum usb_power_roles { USB_PD_PORT_POWER_DISCONNECTED, @@ -3356,7 +4814,7 @@ struct usb_chg_measures { uint16_t voltage_now; uint16_t current_max; uint16_t current_lim; -} __packed; +} __ec_align2; struct ec_response_usb_pd_power_info { uint8_t role; @@ -3365,11 +4823,8 @@ struct ec_response_usb_pd_power_info { uint8_t reserved1; struct usb_chg_measures meas; uint32_t max_power; -} __packed; +} __ec_align4; -struct ec_params_usb_pd_info_request { - uint8_t port; -} __packed; /* * This command will return the number of USB PD charge port + the number @@ -3379,7 +4834,47 @@ struct ec_params_usb_pd_info_request { #define EC_CMD_CHARGE_PORT_COUNT 0x0105 struct ec_response_charge_port_count { uint8_t port_count; -} __packed; +} __ec_align1; + +/* Write USB-PD device FW */ +#define EC_CMD_USB_PD_FW_UPDATE 0x0110 + +enum usb_pd_fw_update_cmds { + USB_PD_FW_REBOOT, + USB_PD_FW_FLASH_ERASE, + USB_PD_FW_FLASH_WRITE, + USB_PD_FW_ERASE_SIG, +}; + +struct ec_params_usb_pd_fw_update { + uint16_t dev_id; + uint8_t cmd; + uint8_t port; + uint32_t size; /* Size to write in bytes */ + /* Followed by data to write */ +} __ec_align4; + +/* Write USB-PD Accessory RW_HASH table entry */ +#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111 +/* RW hash is first 20 bytes of SHA-256 of RW section */ +#define PD_RW_HASH_SIZE 20 +struct ec_params_usb_pd_rw_hash_entry { + uint16_t dev_id; + uint8_t dev_rw_hash[PD_RW_HASH_SIZE]; + uint8_t reserved; /* + * For alignment of current_image + * TODO(rspangler) but it's not aligned! + * Should have been reserved[2]. + */ + uint32_t current_image; /* One of ec_current_image */ +} __ec_align1; + +/* Read USB-PD Accessory info */ +#define EC_CMD_USB_PD_DEV_INFO 0x0112 + +struct ec_params_usb_pd_info_request { + uint8_t port; +} __ec_align1; /* Read USB-PD Device discovery info */ #define EC_CMD_USB_PD_DISCOVERY 0x0113 @@ -3387,7 +4882,7 @@ struct ec_params_usb_pd_discovery_entry { uint16_t vid; /* USB-IF VID */ uint16_t pid; /* USB-IF PID */ uint8_t ptype; /* product type (hub,periph,cable,ama) */ -} __packed; +} __ec_align_size1; /* Override default charge behavior */ #define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114 @@ -3401,9 +4896,13 @@ enum usb_pd_override_ports { struct ec_params_charge_port_override { int16_t override_port; /* Override port# */ -} __packed; +} __ec_align2; -/* Read (and delete) one entry of PD event log */ +/* + * Read (and delete) one entry of PD event log. + * TODO(crbug.com/751742): Make this host command more generic to accommodate + * future non-PD logs that use the same internal EC event_log. + */ #define EC_CMD_PD_GET_LOG_ENTRY 0x0115 struct ec_response_pd_log { @@ -3412,7 +4911,7 @@ struct ec_response_pd_log { uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ uint16_t data; /* type-defined data payload */ uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */ -} __packed; +} __ec_align4; /* The timestamp is the microsecond counter shifted to get about a ms. */ #define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */ @@ -3478,35 +4977,698 @@ struct mcdp_version { uint8_t major; uint8_t minor; uint16_t build; -} __packed; +} __ec_align4; struct mcdp_info { uint8_t family[2]; uint8_t chipid[2]; struct mcdp_version irom; struct mcdp_version fw; -} __packed; +} __ec_align4; /* struct mcdp_info field decoding */ #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) #define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) +/* Get/Set USB-PD Alternate mode info */ +#define EC_CMD_USB_PD_GET_AMODE 0x0116 +struct ec_params_usb_pd_get_mode_request { + uint16_t svid_idx; /* SVID index to get */ + uint8_t port; /* port */ +} __ec_align_size1; + +struct ec_params_usb_pd_get_mode_response { + uint16_t svid; /* SVID */ + uint16_t opos; /* Object Position */ + uint32_t vdo[6]; /* Mode VDOs */ +} __ec_align4; + +#define EC_CMD_USB_PD_SET_AMODE 0x0117 + +enum pd_mode_cmd { + PD_EXIT_MODE = 0, + PD_ENTER_MODE = 1, + /* Not a command. Do NOT remove. */ + PD_MODE_CMD_COUNT, +}; + +struct ec_params_usb_pd_set_mode_request { + uint32_t cmd; /* enum pd_mode_cmd */ + uint16_t svid; /* SVID to set */ + uint8_t opos; /* Object Position */ + uint8_t port; /* port */ +} __ec_align4; + +/* Ask the PD MCU to record a log of a requested type */ +#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118 + +struct ec_params_pd_write_log_entry { + uint8_t type; /* event type : see PD_EVENT_xx above */ + uint8_t port; /* port#, or 0 for events unrelated to a given port */ +} __ec_align1; + + +/* Control USB-PD chip */ +#define EC_CMD_PD_CONTROL 0x0119 + +enum ec_pd_control_cmd { + PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */ + PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */ + PD_RESET, /* Force reset the PD chip */ + PD_CONTROL_DISABLE, /* Disable further calls to this command */ + PD_CHIP_ON, /* Power on the PD chip */ +}; + +struct ec_params_pd_control { + uint8_t chip; /* chip id */ + uint8_t subcmd; +} __ec_align1; + /* Get info about USB-C SS muxes */ -#define EC_CMD_USB_PD_MUX_INFO 0x11a +#define EC_CMD_USB_PD_MUX_INFO 0x011A struct ec_params_usb_pd_mux_info { uint8_t port; /* USB-C port number */ -} __packed; +} __ec_align1; /* Flags representing mux state */ -#define USB_PD_MUX_USB_ENABLED (1 << 0) -#define USB_PD_MUX_DP_ENABLED (1 << 1) -#define USB_PD_MUX_POLARITY_INVERTED (1 << 2) -#define USB_PD_MUX_HPD_IRQ (1 << 3) +#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ +#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ +#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ +#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ +#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ struct ec_response_usb_pd_mux_info { uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ -} __packed; +} __ec_align1; + +#define EC_CMD_PD_CHIP_INFO 0x011B + +struct ec_params_pd_chip_info { + uint8_t port; /* USB-C port number */ + uint8_t renew; /* Force renewal */ +} __ec_align1; + +struct ec_response_pd_chip_info { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; +} __ec_align2; + +struct ec_response_pd_chip_info_v1 { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; + union { + uint8_t min_req_fw_version_string[8]; + uint64_t min_req_fw_version_number; + }; +} __ec_align2; + +/* Run RW signature verification and get status */ +#define EC_CMD_RWSIG_CHECK_STATUS 0x011C + +struct ec_response_rwsig_check_status { + uint32_t status; +} __ec_align4; + +/* For controlling RWSIG task */ +#define EC_CMD_RWSIG_ACTION 0x011D + +enum rwsig_action { + RWSIG_ACTION_ABORT = 0, /* Abort RWSIG and prevent jumping */ + RWSIG_ACTION_CONTINUE = 1, /* Jump to RW immediately */ +}; + +struct ec_params_rwsig_action { + uint32_t action; +} __ec_align4; + +/* Run verification on a slot */ +#define EC_CMD_EFS_VERIFY 0x011E + +struct ec_params_efs_verify { + uint8_t region; /* enum ec_flash_region */ +} __ec_align1; + +/* + * Retrieve info from Cros Board Info store. Response is based on the data + * type. Integers return a uint32. Strings return a string, using the response + * size to determine how big it is. + */ +#define EC_CMD_GET_CROS_BOARD_INFO 0x011F +/* + * Write info into Cros Board Info on EEPROM. Write fails if the board has + * hardware write-protect enabled. + */ +#define EC_CMD_SET_CROS_BOARD_INFO 0x0120 + +enum cbi_data_tag { + CBI_TAG_BOARD_VERSION = 0, /* uint32_t or smaller */ + CBI_TAG_OEM_ID = 1, /* uint32_t or smaller */ + CBI_TAG_SKU_ID = 2, /* uint32_t or smaller */ + CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */ + CBI_TAG_OEM_NAME = 4, /* variable length ascii, nul terminated. */ + CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */ + CBI_TAG_COUNT, +}; + +/* + * Flags to control read operation + * + * RELOAD: Invalidate cache and read data from EEPROM. Useful to verify + * write was successful without reboot. + */ +#define CBI_GET_RELOAD BIT(0) + +struct ec_params_get_cbi { + uint32_t tag; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_GET_* */ +} __ec_align4; + +/* + * Flags to control write behavior. + * + * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's + * useful when writing multiple fields in a row. + * INIT: Need to be set when creating a new CBI from scratch. All fields + * will be initialized to zero first. + */ +#define CBI_SET_NO_SYNC BIT(0) +#define CBI_SET_INIT BIT(1) + +struct ec_params_set_cbi { + uint32_t tag; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_SET_* */ + uint32_t size; /* Data size */ + uint8_t data[]; /* For string and raw data */ +} __ec_align1; + +/* + * Information about resets of the AP by the EC and the EC's own uptime. + */ +#define EC_CMD_GET_UPTIME_INFO 0x0121 + +struct ec_response_uptime_info { + /* + * Number of milliseconds since the last EC boot. Sysjump resets + * typically do not restart the EC's time_since_boot epoch. + * + * WARNING: The EC's sense of time is much less accurate than the AP's + * sense of time, in both phase and frequency. This timebase is similar + * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error. + */ + uint32_t time_since_ec_boot_ms; + + /* + * Number of times the AP was reset by the EC since the last EC boot. + * Note that the AP may be held in reset by the EC during the initial + * boot sequence, such that the very first AP boot may count as more + * than one here. + */ + uint32_t ap_resets_since_ec_boot; + + /* + * The set of flags which describe the EC's most recent reset. See + * include/system.h RESET_FLAG_* for details. + */ + uint32_t ec_reset_flags; + + /* Empty log entries have both the cause and timestamp set to zero. */ + struct ap_reset_log_entry { + /* + * See include/chipset.h: enum chipset_{reset,shutdown}_reason + * for details. + */ + uint16_t reset_cause; + + /* Reserved for protocol growth. */ + uint16_t reserved; + + /* + * The time of the reset's assertion, in milliseconds since the + * last EC boot, in the same epoch as time_since_ec_boot_ms. + * Set to zero if the log entry is empty. + */ + uint32_t reset_time_ms; + } recent_ap_reset[4]; +} __ec_align4; + +/* + * Add entropy to the device secret (stored in the rollback region). + * + * Depending on the chip, the operation may take a long time (e.g. to erase + * flash), so the commands are asynchronous. + */ +#define EC_CMD_ADD_ENTROPY 0x0122 + +enum add_entropy_action { + /* Add entropy to the current secret. */ + ADD_ENTROPY_ASYNC = 0, + /* + * Add entropy, and also make sure that the previous secret is erased. + * (this can be implemented by adding entropy multiple times until + * all rolback blocks have been overwritten). + */ + ADD_ENTROPY_RESET_ASYNC = 1, + /* Read back result from the previous operation. */ + ADD_ENTROPY_GET_RESULT = 2, +}; + +struct ec_params_rollback_add_entropy { + uint8_t action; +} __ec_align1; + +/* + * Perform a single read of a given ADC channel. + */ +#define EC_CMD_ADC_READ 0x0123 + +struct ec_params_adc_read { + uint8_t adc_channel; +} __ec_align1; + +struct ec_response_adc_read { + int32_t adc_value; +} __ec_align4; + +/* + * Read back rollback info + */ +#define EC_CMD_ROLLBACK_INFO 0x0124 + +struct ec_response_rollback_info { + int32_t id; /* Incrementing number to indicate which region to use. */ + int32_t rollback_min_version; + int32_t rw_rollback_version; +} __ec_align4; + + +/* Issue AP reset */ +#define EC_CMD_AP_RESET 0x0125 + +/*****************************************************************************/ +/* The command range 0x200-0x2FF is reserved for Rotor. */ + +/*****************************************************************************/ +/* + * Reserve a range of host commands for the CR51 firmware. + */ +#define EC_CMD_CR51_BASE 0x0300 +#define EC_CMD_CR51_LAST 0x03FF + +/*****************************************************************************/ +/* Fingerprint MCU commands: range 0x0400-0x040x */ + +/* Fingerprint SPI sensor passthru command: prototyping ONLY */ +#define EC_CMD_FP_PASSTHRU 0x0400 + +#define EC_FP_FLAG_NOT_COMPLETE 0x1 + +struct ec_params_fp_passthru { + uint16_t len; /* Number of bytes to write then read */ + uint16_t flags; /* EC_FP_FLAG_xxx */ + uint8_t data[]; /* Data to send */ +} __ec_align2; + +/* Configure the Fingerprint MCU behavior */ +#define EC_CMD_FP_MODE 0x0402 + +/* Put the sensor in its lowest power mode */ +#define FP_MODE_DEEPSLEEP BIT(0) +/* Wait to see a finger on the sensor */ +#define FP_MODE_FINGER_DOWN BIT(1) +/* Poll until the finger has left the sensor */ +#define FP_MODE_FINGER_UP BIT(2) +/* Capture the current finger image */ +#define FP_MODE_CAPTURE BIT(3) +/* Finger enrollment session on-going */ +#define FP_MODE_ENROLL_SESSION BIT(4) +/* Enroll the current finger image */ +#define FP_MODE_ENROLL_IMAGE BIT(5) +/* Try to match the current finger image */ +#define FP_MODE_MATCH BIT(6) +/* Reset and re-initialize the sensor. */ +#define FP_MODE_RESET_SENSOR BIT(7) +/* special value: don't change anything just read back current mode */ +#define FP_MODE_DONT_CHANGE BIT(31) + +#define FP_VALID_MODES (FP_MODE_DEEPSLEEP | \ + FP_MODE_FINGER_DOWN | \ + FP_MODE_FINGER_UP | \ + FP_MODE_CAPTURE | \ + FP_MODE_ENROLL_SESSION | \ + FP_MODE_ENROLL_IMAGE | \ + FP_MODE_MATCH | \ + FP_MODE_RESET_SENSOR | \ + FP_MODE_DONT_CHANGE) + +/* Capture types defined in bits [30..28] */ +#define FP_MODE_CAPTURE_TYPE_SHIFT 28 +#define FP_MODE_CAPTURE_TYPE_MASK (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT) +/* + * This enum must remain ordered, if you add new values you must ensure that + * FP_CAPTURE_TYPE_MAX is still the last one. + */ +enum fp_capture_type { + /* Full blown vendor-defined capture (produces 'frame_size' bytes) */ + FP_CAPTURE_VENDOR_FORMAT = 0, + /* Simple raw image capture (produces width x height x bpp bits) */ + FP_CAPTURE_SIMPLE_IMAGE = 1, + /* Self test pattern (e.g. checkerboard) */ + FP_CAPTURE_PATTERN0 = 2, + /* Self test pattern (e.g. inverted checkerboard) */ + FP_CAPTURE_PATTERN1 = 3, + /* Capture for Quality test with fixed contrast */ + FP_CAPTURE_QUALITY_TEST = 4, + /* Capture for pixel reset value test */ + FP_CAPTURE_RESET_TEST = 5, + FP_CAPTURE_TYPE_MAX, +}; +/* Extracts the capture type from the sensor 'mode' word */ +#define FP_CAPTURE_TYPE(mode) (((mode) & FP_MODE_CAPTURE_TYPE_MASK) \ + >> FP_MODE_CAPTURE_TYPE_SHIFT) + +struct ec_params_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ +} __ec_align4; + +struct ec_response_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ +} __ec_align4; + +/* Retrieve Fingerprint sensor information */ +#define EC_CMD_FP_INFO 0x0403 + +/* Number of dead pixels detected on the last maintenance */ +#define FP_ERROR_DEAD_PIXELS(errors) ((errors) & 0x3FF) +/* Unknown number of dead pixels detected on the last maintenance */ +#define FP_ERROR_DEAD_PIXELS_UNKNOWN (0x3FF) +/* No interrupt from the sensor */ +#define FP_ERROR_NO_IRQ BIT(12) +/* SPI communication error */ +#define FP_ERROR_SPI_COMM BIT(13) +/* Invalid sensor Hardware ID */ +#define FP_ERROR_BAD_HWID BIT(14) +/* Sensor initialization failed */ +#define FP_ERROR_INIT_FAIL BIT(15) + +struct ec_response_fp_info_v0 { + /* Sensor identification */ + uint32_t vendor_id; + uint32_t product_id; + uint32_t model_id; + uint32_t version; + /* Image frame characteristics */ + uint32_t frame_size; + uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ + uint16_t width; + uint16_t height; + uint16_t bpp; + uint16_t errors; /* see FP_ERROR_ flags above */ +} __ec_align4; + +struct ec_response_fp_info { + /* Sensor identification */ + uint32_t vendor_id; + uint32_t product_id; + uint32_t model_id; + uint32_t version; + /* Image frame characteristics */ + uint32_t frame_size; + uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ + uint16_t width; + uint16_t height; + uint16_t bpp; + uint16_t errors; /* see FP_ERROR_ flags above */ + /* Template/finger current information */ + uint32_t template_size; /* max template size in bytes */ + uint16_t template_max; /* maximum number of fingers/templates */ + uint16_t template_valid; /* number of valid fingers/templates */ + uint32_t template_dirty; /* bitmap of templates with MCU side changes */ + uint32_t template_version; /* version of the template format */ +} __ec_align4; + +/* Get the last captured finger frame or a template content */ +#define EC_CMD_FP_FRAME 0x0404 + +/* constants defining the 'offset' field which also contains the frame index */ +#define FP_FRAME_INDEX_SHIFT 28 +/* Frame buffer where the captured image is stored */ +#define FP_FRAME_INDEX_RAW_IMAGE 0 +/* First frame buffer holding a template */ +#define FP_FRAME_INDEX_TEMPLATE 1 +#define FP_FRAME_GET_BUFFER_INDEX(offset) ((offset) >> FP_FRAME_INDEX_SHIFT) +#define FP_FRAME_OFFSET_MASK 0x0FFFFFFF + +/* Version of the format of the encrypted templates. */ +#define FP_TEMPLATE_FORMAT_VERSION 3 + +/* Constants for encryption parameters */ +#define FP_CONTEXT_NONCE_BYTES 12 +#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t)) +#define FP_CONTEXT_TAG_BYTES 16 +#define FP_CONTEXT_SALT_BYTES 16 +#define FP_CONTEXT_TPM_BYTES 32 + +struct ec_fp_template_encryption_metadata { + /* + * Version of the structure format (N=3). + */ + uint16_t struct_version; + /* Reserved bytes, set to 0. */ + uint16_t reserved; + /* + * The salt is *only* ever used for key derivation. The nonce is unique, + * a different one is used for every message. + */ + uint8_t nonce[FP_CONTEXT_NONCE_BYTES]; + uint8_t salt[FP_CONTEXT_SALT_BYTES]; + uint8_t tag[FP_CONTEXT_TAG_BYTES]; +}; + +struct ec_params_fp_frame { + /* + * The offset contains the template index or FP_FRAME_INDEX_RAW_IMAGE + * in the high nibble, and the real offset within the frame in + * FP_FRAME_OFFSET_MASK. + */ + uint32_t offset; + uint32_t size; +} __ec_align4; + +/* Load a template into the MCU */ +#define EC_CMD_FP_TEMPLATE 0x0405 + +/* Flag in the 'size' field indicating that the full template has been sent */ +#define FP_TEMPLATE_COMMIT 0x80000000 + +struct ec_params_fp_template { + uint32_t offset; + uint32_t size; + uint8_t data[]; +} __ec_align4; + +/* Clear the current fingerprint user context and set a new one */ +#define EC_CMD_FP_CONTEXT 0x0406 + +struct ec_params_fp_context { + uint32_t userid[FP_CONTEXT_USERID_WORDS]; +} __ec_align4; + +#define EC_CMD_FP_STATS 0x0407 + +#define FPSTATS_CAPTURE_INV BIT(0) +#define FPSTATS_MATCHING_INV BIT(1) + +struct ec_response_fp_stats { + uint32_t capture_time_us; + uint32_t matching_time_us; + uint32_t overall_time_us; + struct { + uint32_t lo; + uint32_t hi; + } overall_t0; + uint8_t timestamps_invalid; + int8_t template_matched; +} __ec_align2; + +#define EC_CMD_FP_SEED 0x0408 +struct ec_params_fp_seed { + /* + * Version of the structure format (N=3). + */ + uint16_t struct_version; + /* Reserved bytes, set to 0. */ + uint16_t reserved; + /* Seed from the TPM. */ + uint8_t seed[FP_CONTEXT_TPM_BYTES]; +} __ec_align4; + +/*****************************************************************************/ +/* Touchpad MCU commands: range 0x0500-0x05FF */ + +/* Perform touchpad self test */ +#define EC_CMD_TP_SELF_TEST 0x0500 + +/* Get number of frame types, and the size of each type */ +#define EC_CMD_TP_FRAME_INFO 0x0501 + +struct ec_response_tp_frame_info { + uint32_t n_frames; + uint32_t frame_sizes[0]; +} __ec_align4; + +/* Create a snapshot of current frame readings */ +#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502 + +/* Read the frame */ +#define EC_CMD_TP_FRAME_GET 0x0503 + +struct ec_params_tp_frame_get { + uint32_t frame_index; + uint32_t offset; + uint32_t size; +} __ec_align4; + +/*****************************************************************************/ +/* EC-EC communication commands: range 0x0600-0x06FF */ + +#define EC_COMM_TEXT_MAX 8 + +/* + * Get battery static information, i.e. information that never changes, or + * very infrequently. + */ +#define EC_CMD_BATTERY_GET_STATIC 0x0600 + +/** + * struct ec_params_battery_static_info - Battery static info parameters + * @index: Battery index. + */ +struct ec_params_battery_static_info { + uint8_t index; +} __ec_align_size1; + +/** + * struct ec_response_battery_static_info - Battery static info response + * @design_capacity: Battery Design Capacity (mAh) + * @design_voltage: Battery Design Voltage (mV) + * @manufacturer: Battery Manufacturer String + * @model: Battery Model Number String + * @serial: Battery Serial Number String + * @type: Battery Type String + * @cycle_count: Battery Cycle Count + */ +struct ec_response_battery_static_info { + uint16_t design_capacity; + uint16_t design_voltage; + char manufacturer[EC_COMM_TEXT_MAX]; + char model[EC_COMM_TEXT_MAX]; + char serial[EC_COMM_TEXT_MAX]; + char type[EC_COMM_TEXT_MAX]; + /* TODO(crbug.com/795991): Consider moving to dynamic structure. */ + uint32_t cycle_count; +} __ec_align4; + +/* + * Get battery dynamic information, i.e. information that is likely to change + * every time it is read. + */ +#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601 + +/** + * struct ec_params_battery_dynamic_info - Battery dynamic info parameters + * @index: Battery index. + */ +struct ec_params_battery_dynamic_info { + uint8_t index; +} __ec_align_size1; + +/** + * struct ec_response_battery_dynamic_info - Battery dynamic info response + * @actual_voltage: Battery voltage (mV) + * @actual_current: Battery current (mA); negative=discharging + * @remaining_capacity: Remaining capacity (mAh) + * @full_capacity: Capacity (mAh, might change occasionally) + * @flags: Flags, see EC_BATT_FLAG_* + * @desired_voltage: Charging voltage desired by battery (mV) + * @desired_current: Charging current desired by battery (mA) + */ +struct ec_response_battery_dynamic_info { + int16_t actual_voltage; + int16_t actual_current; + int16_t remaining_capacity; + int16_t full_capacity; + int16_t flags; + int16_t desired_voltage; + int16_t desired_current; +} __ec_align2; + +/* + * Control charger chip. Used to control charger chip on the slave. + */ +#define EC_CMD_CHARGER_CONTROL 0x0602 + +/** + * struct ec_params_charger_control - Charger control parameters + * @max_current: Charger current (mA). Positive to allow base to draw up to + * max_current and (possibly) charge battery, negative to request current + * from base (OTG). + * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is + * >= 0. + * @allow_charging: Allow base battery charging (only makes sense if + * max_current > 0). + */ +struct ec_params_charger_control { + int16_t max_current; + uint16_t otg_voltage; + uint8_t allow_charging; +} __ec_align_size1; + +/*****************************************************************************/ +/* + * Reserve a range of host commands for board-specific, experimental, or + * special purpose features. These can be (re)used without updating this file. + * + * CAUTION: Don't go nuts with this. Shipping products should document ALL + * their EC commands for easier development, testing, debugging, and support. + * + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. + * + * In your experimental code, you may want to do something like this: + * + * #define EC_CMD_MAGIC_FOO 0x0000 + * #define EC_CMD_MAGIC_BAR 0x0001 + * #define EC_CMD_MAGIC_HEY 0x0002 + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler, + * EC_VER_MASK(0); + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler, + * EC_VER_MASK(0); + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler, + * EC_VER_MASK(0); + */ +#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00 +#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF + +/* + * Given the private host command offset, calculate the true private host + * command value. + */ +#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \ + (EC_CMD_BOARD_SPECIFIC_BASE + (command)) /*****************************************************************************/ /* @@ -3546,4 +5708,6 @@ struct ec_response_usb_pd_mux_info { #define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 #define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE + + #endif /* __CROS_EC_COMMANDS_H */ diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h index d0c91ba65525..976447607ea2 100644 --- a/include/linux/mfd/lp87565.h +++ b/include/linux/mfd/lp87565.h @@ -17,6 +17,7 @@ enum lp87565_device_type { LP87565_DEVICE_TYPE_UNKNOWN = 0, + LP87565_DEVICE_TYPE_LP87561_Q1, LP87565_DEVICE_TYPE_LP87565_Q1, }; @@ -249,6 +250,7 @@ enum LP87565_regulator_id { LP87565_BUCK_3, LP87565_BUCK_10, LP87565_BUCK_23, + LP87565_BUCK_3210, }; /** diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index d3156594674c..2a9cd01691b2 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -382,6 +382,7 @@ enum rk805_reg { #define SWITCH1_EN BIT(5) #define DEV_OFF_RST BIT(3) #define DEV_OFF BIT(0) +#define RTC_STOP BIT(0) #define VB_LO_ACT BIT(4) #define VB_LO_SEL_3500MV (7 << 0) @@ -395,7 +396,179 @@ enum rk805_reg { #define SHUTDOWN_FUN (0x2 << 2) #define SLEEP_FUN (0x1 << 2) #define RK8XX_ID_MSK 0xfff0 +#define PWM_MODE_MSK BIT(7) #define FPWM_MODE BIT(7) +#define AUTO_PWM_MODE 0 + +enum rk817_reg_id { + RK817_ID_DCDC1 = 0, + RK817_ID_DCDC2, + RK817_ID_DCDC3, + RK817_ID_DCDC4, + RK817_ID_LDO1, + RK817_ID_LDO2, + RK817_ID_LDO3, + RK817_ID_LDO4, + RK817_ID_LDO5, + RK817_ID_LDO6, + RK817_ID_LDO7, + RK817_ID_LDO8, + RK817_ID_LDO9, + RK817_ID_BOOST, + RK817_ID_BOOST_OTG_SW, + RK817_NUM_REGULATORS +}; + +enum rk809_reg_id { + RK809_ID_DCDC5 = RK817_ID_BOOST, + RK809_ID_SW1, + RK809_ID_SW2, + RK809_NUM_REGULATORS +}; + +#define RK817_SECONDS_REG 0x00 +#define RK817_MINUTES_REG 0x01 +#define RK817_HOURS_REG 0x02 +#define RK817_DAYS_REG 0x03 +#define RK817_MONTHS_REG 0x04 +#define RK817_YEARS_REG 0x05 +#define RK817_WEEKS_REG 0x06 +#define RK817_ALARM_SECONDS_REG 0x07 +#define RK817_ALARM_MINUTES_REG 0x08 +#define RK817_ALARM_HOURS_REG 0x09 +#define RK817_ALARM_DAYS_REG 0x0a +#define RK817_ALARM_MONTHS_REG 0x0b +#define RK817_ALARM_YEARS_REG 0x0c +#define RK817_RTC_CTRL_REG 0xd +#define RK817_RTC_STATUS_REG 0xe +#define RK817_RTC_INT_REG 0xf +#define RK817_RTC_COMP_LSB_REG 0x10 +#define RK817_RTC_COMP_MSB_REG 0x11 + +#define RK817_POWER_EN_REG(i) (0xb1 + (i)) +#define RK817_POWER_SLP_EN_REG(i) (0xb5 + (i)) + +#define RK817_POWER_CONFIG (0xb9) + +#define RK817_BUCK_CONFIG_REG(i) (0xba + (i) * 3) + +#define RK817_BUCK1_ON_VSEL_REG 0xBB +#define RK817_BUCK1_SLP_VSEL_REG 0xBC + +#define RK817_BUCK2_CONFIG_REG 0xBD +#define RK817_BUCK2_ON_VSEL_REG 0xBE +#define RK817_BUCK2_SLP_VSEL_REG 0xBF + +#define RK817_BUCK3_CONFIG_REG 0xC0 +#define RK817_BUCK3_ON_VSEL_REG 0xC1 +#define RK817_BUCK3_SLP_VSEL_REG 0xC2 + +#define RK817_BUCK4_CONFIG_REG 0xC3 +#define RK817_BUCK4_ON_VSEL_REG 0xC4 +#define RK817_BUCK4_SLP_VSEL_REG 0xC5 + +#define RK817_LDO_ON_VSEL_REG(idx) (0xcc + (idx) * 2) +#define RK817_BOOST_OTG_CFG (0xde) + +#define RK817_ID_MSB 0xed +#define RK817_ID_LSB 0xee + +#define RK817_SYS_STS 0xf0 +#define RK817_SYS_CFG(i) (0xf1 + (i)) + +#define RK817_ON_SOURCE_REG 0xf5 +#define RK817_OFF_SOURCE_REG 0xf6 + +/* INTERRUPT REGISTER */ +#define RK817_INT_STS_REG0 0xf8 +#define RK817_INT_STS_MSK_REG0 0xf9 +#define RK817_INT_STS_REG1 0xfa +#define RK817_INT_STS_MSK_REG1 0xfb +#define RK817_INT_STS_REG2 0xfc +#define RK817_INT_STS_MSK_REG2 0xfd +#define RK817_GPIO_INT_CFG 0xfe + +/* IRQ Definitions */ +#define RK817_IRQ_PWRON_FALL 0 +#define RK817_IRQ_PWRON_RISE 1 +#define RK817_IRQ_PWRON 2 +#define RK817_IRQ_PWMON_LP 3 +#define RK817_IRQ_HOTDIE 4 +#define RK817_IRQ_RTC_ALARM 5 +#define RK817_IRQ_RTC_PERIOD 6 +#define RK817_IRQ_VB_LO 7 +#define RK817_IRQ_PLUG_IN 8 +#define RK817_IRQ_PLUG_OUT 9 +#define RK817_IRQ_CHRG_TERM 10 +#define RK817_IRQ_CHRG_TIME 11 +#define RK817_IRQ_CHRG_TS 12 +#define RK817_IRQ_USB_OV 13 +#define RK817_IRQ_CHRG_IN_CLMP 14 +#define RK817_IRQ_BAT_DIS_ILIM 15 +#define RK817_IRQ_GATE_GPIO 16 +#define RK817_IRQ_TS_GPIO 17 +#define RK817_IRQ_CODEC_PD 18 +#define RK817_IRQ_CODEC_PO 19 +#define RK817_IRQ_CLASSD_MUTE_DONE 20 +#define RK817_IRQ_CLASSD_OCP 21 +#define RK817_IRQ_BAT_OVP 22 +#define RK817_IRQ_CHRG_BAT_HI 23 +#define RK817_IRQ_END (RK817_IRQ_CHRG_BAT_HI + 1) + +/* + * rtc_ctrl 0xd + * same as 808, except bit4 + */ +#define RK817_RTC_CTRL_RSV4 BIT(4) + +/* power config 0xb9 */ +#define RK817_BUCK3_FB_RES_MSK BIT(6) +#define RK817_BUCK3_FB_RES_INTER BIT(6) +#define RK817_BUCK3_FB_RES_EXT 0 + +/* buck config 0xba */ +#define RK817_RAMP_RATE_OFFSET 6 +#define RK817_RAMP_RATE_MASK (0x3 << RK817_RAMP_RATE_OFFSET) +#define RK817_RAMP_RATE_3MV_PER_US (0x0 << RK817_RAMP_RATE_OFFSET) +#define RK817_RAMP_RATE_6_3MV_PER_US (0x1 << RK817_RAMP_RATE_OFFSET) +#define RK817_RAMP_RATE_12_5MV_PER_US (0x2 << RK817_RAMP_RATE_OFFSET) +#define RK817_RAMP_RATE_25MV_PER_US (0x3 << RK817_RAMP_RATE_OFFSET) + +/* sys_cfg1 0xf2 */ +#define RK817_HOTDIE_TEMP_MSK (0x3 << 4) +#define RK817_HOTDIE_85 (0x0 << 4) +#define RK817_HOTDIE_95 (0x1 << 4) +#define RK817_HOTDIE_105 (0x2 << 4) +#define RK817_HOTDIE_115 (0x3 << 4) + +#define RK817_TSD_TEMP_MSK BIT(6) +#define RK817_TSD_140 0 +#define RK817_TSD_160 BIT(6) + +#define RK817_CLK32KOUT2_EN BIT(7) + +/* sys_cfg3 0xf4 */ +#define RK817_SLPPIN_FUNC_MSK (0x3 << 3) +#define SLPPIN_NULL_FUN (0x0 << 3) +#define SLPPIN_SLP_FUN (0x1 << 3) +#define SLPPIN_DN_FUN (0x2 << 3) +#define SLPPIN_RST_FUN (0x3 << 3) + +#define RK817_RST_FUNC_MSK (0x3 << 6) +#define RK817_RST_FUNC_SFT (6) +#define RK817_RST_FUNC_CNT (3) +#define RK817_RST_FUNC_DEV (0) /* reset the dev */ +#define RK817_RST_FUNC_REG (0x1 << 6) /* reset the reg only */ + +#define RK817_SLPPOL_MSK BIT(5) +#define RK817_SLPPOL_H BIT(5) +#define RK817_SLPPOL_L (0) + +/* gpio&int 0xfe */ +#define RK817_INT_POL_MSK BIT(1) +#define RK817_INT_POL_H BIT(1) +#define RK817_INT_POL_L 0 +#define RK809_BUCK5_CONFIG(i) (RK817_BOOST_OTG_CFG + (i) * 1) enum { BUCK_ILMIN_50MA, @@ -443,6 +616,8 @@ enum { enum { RK805_ID = 0x8050, RK808_ID = 0x0000, + RK809_ID = 0x8090, + RK817_ID = 0x8170, RK818_ID = 0x8181, }; |