diff options
Diffstat (limited to 'include/linux/dlm.h')
| -rw-r--r-- | include/linux/dlm.h | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/include/linux/dlm.h b/include/linux/dlm.h new file mode 100644 index 000000000000..1b1dcb9a40bb --- /dev/null +++ b/include/linux/dlm.h @@ -0,0 +1,302 @@ +/****************************************************************************** +******************************************************************************* +** +** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. +** Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved. +** +** This copyrighted material is made available to anyone wishing to use, +** modify, copy, or redistribute it subject to the terms and conditions +** of the GNU General Public License v.2. +** +******************************************************************************* +******************************************************************************/ + +#ifndef __DLM_DOT_H__ +#define __DLM_DOT_H__ + +/* + * Interface to Distributed Lock Manager (DLM) + * routines and structures to use DLM lockspaces + */ + +/* + * Lock Modes + */ + +#define DLM_LOCK_IV -1 /* invalid */ +#define DLM_LOCK_NL 0 /* null */ +#define DLM_LOCK_CR 1 /* concurrent read */ +#define DLM_LOCK_CW 2 /* concurrent write */ +#define DLM_LOCK_PR 3 /* protected read */ +#define DLM_LOCK_PW 4 /* protected write */ +#define DLM_LOCK_EX 5 /* exclusive */ + +/* + * Maximum size in bytes of a dlm_lock name + */ + +#define DLM_RESNAME_MAXLEN 64 + +/* + * Flags to dlm_lock + * + * DLM_LKF_NOQUEUE + * + * Do not queue the lock request on the wait queue if it cannot be granted + * immediately. If the lock cannot be granted because of this flag, DLM will + * either return -EAGAIN from the dlm_lock call or will return 0 from + * dlm_lock and -EAGAIN in the lock status block when the AST is executed. + * + * DLM_LKF_CANCEL + * + * Used to cancel a pending lock request or conversion. A converting lock is + * returned to its previously granted mode. + * + * DLM_LKF_CONVERT + * + * Indicates a lock conversion request. For conversions the name and namelen + * are ignored and the lock ID in the LKSB is used to identify the lock. + * + * DLM_LKF_VALBLK + * + * Requests DLM to return the current contents of the lock value block in the + * lock status block. When this flag is set in a lock conversion from PW or EX + * modes, DLM assigns the value specified in the lock status block to the lock + * value block of the lock resource. The LVB is a DLM_LVB_LEN size array + * containing application-specific information. + * + * DLM_LKF_QUECVT + * + * Force a conversion request to be queued, even if it is compatible with + * the granted modes of other locks on the same resource. + * + * DLM_LKF_IVVALBLK + * + * Invalidate the lock value block. + * + * DLM_LKF_CONVDEADLK + * + * Allows the dlm to resolve conversion deadlocks internally by demoting the + * granted mode of a converting lock to NL. The DLM_SBF_DEMOTED flag is + * returned for a conversion that's been effected by this. + * + * DLM_LKF_PERSISTENT + * + * Only relevant to locks originating in userspace. A persistent lock will not + * be removed if the process holding the lock exits. + * + * DLM_LKF_NODLKWT + * DLM_LKF_NODLCKBLK + * + * net yet implemented + * + * DLM_LKF_EXPEDITE + * + * Used only with new requests for NL mode locks. Tells the lock manager + * to grant the lock, ignoring other locks in convert and wait queues. + * + * DLM_LKF_NOQUEUEBAST + * + * Send blocking AST's before returning -EAGAIN to the caller. It is only + * used along with the NOQUEUE flag. Blocking AST's are not sent for failed + * NOQUEUE requests otherwise. + * + * DLM_LKF_HEADQUE + * + * Add a lock to the head of the convert or wait queue rather than the tail. + * + * DLM_LKF_NOORDER + * + * Disregard the standard grant order rules and grant a lock as soon as it + * is compatible with other granted locks. + * + * DLM_LKF_ORPHAN + * + * not yet implemented + * + * DLM_LKF_ALTPR + * + * If the requested mode cannot be granted immediately, try to grant the lock + * in PR mode instead. If this alternate mode is granted instead of the + * requested mode, DLM_SBF_ALTMODE is returned in the lksb. + * + * DLM_LKF_ALTCW + * + * The same as ALTPR, but the alternate mode is CW. + * + * DLM_LKF_FORCEUNLOCK + * + * Unlock the lock even if it is converting or waiting or has sublocks. + * Only really for use by the userland device.c code. + * + */ + +#define DLM_LKF_NOQUEUE 0x00000001 +#define DLM_LKF_CANCEL 0x00000002 +#define DLM_LKF_CONVERT 0x00000004 +#define DLM_LKF_VALBLK 0x00000008 +#define DLM_LKF_QUECVT 0x00000010 +#define DLM_LKF_IVVALBLK 0x00000020 +#define DLM_LKF_CONVDEADLK 0x00000040 +#define DLM_LKF_PERSISTENT 0x00000080 +#define DLM_LKF_NODLCKWT 0x00000100 +#define DLM_LKF_NODLCKBLK 0x00000200 +#define DLM_LKF_EXPEDITE 0x00000400 +#define DLM_LKF_NOQUEUEBAST 0x00000800 +#define DLM_LKF_HEADQUE 0x00001000 +#define DLM_LKF_NOORDER 0x00002000 +#define DLM_LKF_ORPHAN 0x00004000 +#define DLM_LKF_ALTPR 0x00008000 +#define DLM_LKF_ALTCW 0x00010000 +#define DLM_LKF_FORCEUNLOCK 0x00020000 + +/* + * Some return codes that are not in errno.h + */ + +#define DLM_ECANCEL 0x10001 +#define DLM_EUNLOCK 0x10002 + +typedef void dlm_lockspace_t; + +/* + * Lock status block + * + * Use this structure to specify the contents of the lock value block. For a + * conversion request, this structure is used to specify the lock ID of the + * lock. DLM writes the status of the lock request and the lock ID assigned + * to the request in the lock status block. + * + * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests. + * It is available when dlm_lock returns. + * + * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules + * shown for the DLM_LKF_VALBLK flag. + * + * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock, + * it was first demoted to NL to avoid conversion deadlock. + * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid. + * + * sb_status: the returned status of the lock request set prior to AST + * execution. Possible return values: + * + * 0 if lock request was successful + * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE + * -ENOMEM if there is no memory to process request + * -EINVAL if there are invalid parameters + * -DLM_EUNLOCK if unlock request was successful + * -DLM_ECANCEL if a cancel completed successfully + */ + +#define DLM_SBF_DEMOTED 0x01 +#define DLM_SBF_VALNOTVALID 0x02 +#define DLM_SBF_ALTMODE 0x04 + +struct dlm_lksb { + int sb_status; + uint32_t sb_lkid; + char sb_flags; + char * sb_lvbptr; +}; + + +#ifdef __KERNEL__ + +#define DLM_LSFL_NODIR 0x00000001 + +/* + * dlm_new_lockspace + * + * Starts a lockspace with the given name. If the named lockspace exists in + * the cluster, the calling node joins it. + */ + +int dlm_new_lockspace(char *name, int namelen, dlm_lockspace_t **lockspace, + uint32_t flags, int lvblen); + +/* + * dlm_release_lockspace + * + * Stop a lockspace. + */ + +int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force); + +/* + * dlm_lock + * + * Make an asyncronous request to acquire or convert a lock on a named + * resource. + * + * lockspace: context for the request + * mode: the requested mode of the lock (DLM_LOCK_) + * lksb: lock status block for input and async return values + * flags: input flags (DLM_LKF_) + * name: name of the resource to lock, can be binary + * namelen: the length in bytes of the resource name (MAX_RESNAME_LEN) + * parent: the lock ID of a parent lock or 0 if none + * lockast: function DLM executes when it completes processing the request + * astarg: argument passed to lockast and bast functions + * bast: function DLM executes when this lock later blocks another request + * + * Returns: + * 0 if request is successfully queued for processing + * -EINVAL if any input parameters are invalid + * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE + * -ENOMEM if there is no memory to process request + * -ENOTCONN if there is a communication error + * + * If the call to dlm_lock returns an error then the operation has failed and + * the AST routine will not be called. If dlm_lock returns 0 it is still + * possible that the lock operation will fail. The AST routine will be called + * when the locking is complete and the status is returned in the lksb. + * + * If the AST routines or parameter are passed to a conversion operation then + * they will overwrite those values that were passed to a previous dlm_lock + * call. + * + * AST routines should not block (at least not for long), but may make + * any locking calls they please. + */ + +int dlm_lock(dlm_lockspace_t *lockspace, + int mode, + struct dlm_lksb *lksb, + uint32_t flags, + void *name, + unsigned int namelen, + uint32_t parent_lkid, + void (*lockast) (void *astarg), + void *astarg, + void (*bast) (void *astarg, int mode)); + +/* + * dlm_unlock + * + * Asynchronously release a lock on a resource. The AST routine is called + * when the resource is successfully unlocked. + * + * lockspace: context for the request + * lkid: the lock ID as returned in the lksb + * flags: input flags (DLM_LKF_) + * lksb: if NULL the lksb parameter passed to last lock request is used + * astarg: the arg used with the completion ast for the unlock + * + * Returns: + * 0 if request is successfully queued for processing + * -EINVAL if any input parameters are invalid + * -ENOTEMPTY if the lock still has sublocks + * -EBUSY if the lock is waiting for a remote lock operation + * -ENOTCONN if there is a communication error + */ + +int dlm_unlock(dlm_lockspace_t *lockspace, + uint32_t lkid, + uint32_t flags, + struct dlm_lksb *lksb, + void *astarg); + +#endif /* __KERNEL__ */ + +#endif /* __DLM_DOT_H__ */ + |