summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/rtc/Kconfig58
-rw-r--r--drivers/rtc/Makefile5
-rw-r--r--drivers/rtc/dev.c5
-rw-r--r--drivers/rtc/lib.c6
-rw-r--r--drivers/rtc/rtc-88pm80x.c21
-rw-r--r--drivers/rtc/rtc-88pm860x.c21
-rw-r--r--drivers/rtc/rtc-ab-eoz9.c465
-rw-r--r--drivers/rtc/rtc-abx80x.c71
-rw-r--r--drivers/rtc/rtc-cadence.c423
-rw-r--r--drivers/rtc/rtc-coh901331.c6
-rw-r--r--drivers/rtc/rtc-ds1307.c707
-rw-r--r--drivers/rtc/rtc-ds1672.c3
-rw-r--r--drivers/rtc/rtc-hym8563.c2
-rw-r--r--drivers/rtc/rtc-imx-sc.c21
-rw-r--r--drivers/rtc/rtc-isl1208.c167
-rw-r--r--drivers/rtc/rtc-mc146818-lib.c2
-rw-r--r--drivers/rtc/rtc-meson.c407
-rw-r--r--drivers/rtc/rtc-pcf85063.c46
-rw-r--r--drivers/rtc/rtc-pcf8523.c29
-rw-r--r--drivers/rtc/rtc-pic32.c34
-rw-r--r--drivers/rtc/rtc-pm8xxx.c6
-rw-r--r--drivers/rtc/rtc-rs5c372.c76
-rw-r--r--drivers/rtc/rtc-rv3028.c732
-rw-r--r--drivers/rtc/rtc-rv8803.c15
-rw-r--r--drivers/rtc/rtc-rx8581.c114
-rw-r--r--drivers/rtc/rtc-s3c.c87
-rw-r--r--drivers/rtc/rtc-sd3078.c231
-rw-r--r--drivers/rtc/rtc-snvs.c6
-rw-r--r--drivers/rtc/rtc-tx4939.c26
-rw-r--r--drivers/rtc/rtc-zynqmp.c18
30 files changed, 3232 insertions, 578 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 225b0b8516f3..e1a1f2b1cbba 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -185,6 +185,16 @@ config RTC_DRV_ABB5ZES3
This driver can also be built as a module. If so, the module
will be called rtc-ab-b5ze-s3.
+config RTC_DRV_ABEOZ9
+ select REGMAP_I2C
+ tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
+ help
+ If you say yes here you get support for the Abracon
+ AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ab-e0z9.
+
config RTC_DRV_ABX80X
tristate "Abracon ABx80x"
select WATCHDOG_CORE if WATCHDOG
@@ -601,9 +611,10 @@ config RTC_DRV_RX8010
will be called rtc-rx8010.
config RTC_DRV_RX8581
- tristate "Epson RX-8581"
+ tristate "Epson RX-8571/RX-8581"
help
- If you say yes here you will get support for the Epson RX-8581.
+ If you say yes here you will get support for the Epson RX-8571/
+ RX-8581.
This driver can also be built as a module. If so the module
will be called rtc-rx8581.
@@ -626,6 +637,15 @@ config RTC_DRV_EM3027
This driver can also be built as a module. If so, the module
will be called rtc-em3027.
+config RTC_DRV_RV3028
+ tristate "Micro Crystal RV3028"
+ help
+ If you say yes here you get support for the Micro Crystal
+ RV3028.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rv3028.
+
config RTC_DRV_RV8803
tristate "Micro Crystal RV8803, Epson RX8900"
help
@@ -646,6 +666,15 @@ config RTC_DRV_S5M
This driver can also be built as a module. If so, the module
will be called rtc-s5m.
+config RTC_DRV_SD3078
+ tristate "ZXW Crystal SD3078"
+ help
+ If you say yes here you get support for the ZXW Crystal
+ SD3078 RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-sd3078
+
endif # I2C
comment "SPI RTC drivers"
@@ -1285,6 +1314,17 @@ config RTC_DRV_IMXDI
This driver can also be built as a module, if so, the module
will be called "rtc-imxdi".
+config RTC_DRV_MESON
+ tristate "Amlogic Meson RTC"
+ depends on (ARM && ARCH_MESON) || COMPILE_TEST
+ select REGMAP_MMIO
+ help
+ Support for the RTC block on the Amlogic Meson6, Meson8, Meson8b
+ and Meson8m2 SoCs.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-meson".
+
config RTC_DRV_OMAP
tristate "TI OMAP Real Time Clock"
depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
@@ -1508,6 +1548,16 @@ config RTC_DRV_ARMADA38X
This driver can also be built as a module. If so, the module
will be called armada38x-rtc.
+config RTC_DRV_CADENCE
+ tristate "Cadence RTC driver"
+ depends on OF && HAS_IOMEM
+ help
+ If you say Y here you will get access to Cadence RTC IP
+ found on certain SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-cadence.
+
config RTC_DRV_FTRTC010
tristate "Faraday Technology FTRTC010 RTC"
depends on HAS_IOMEM
@@ -1679,6 +1729,7 @@ config RTC_DRV_SNVS
config RTC_DRV_IMX_SC
depends on IMX_SCU
+ depends on HAVE_ARM_SMCCC
tristate "NXP i.MX System Controller RTC support"
help
If you say yes here you get support for the NXP i.MX System
@@ -1795,8 +1846,7 @@ comment "HID Sensor RTC drivers"
config RTC_DRV_HID_SENSOR_TIME
tristate "HID Sensor Time"
depends on USB_HID
- select IIO
- select HID_SENSOR_HUB
+ depends on HID_SENSOR_HUB && IIO
select HID_SENSOR_IIO_COMMON
help
Say yes here to build support for the HID Sensors of type Time.
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index df022d820bee..1bf9f75a7865 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABEOZ9) += rtc-ab-eoz9.o
obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o
obj-$(CONFIG_RTC_DRV_AC100) += rtc-ac100.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o
obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
obj-$(CONFIG_RTC_DRV_BRCMSTB) += rtc-brcmstb-waketimer.o
+obj-$(CONFIG_RTC_DRV_CADENCE) += rtc-cadence.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o
obj-$(CONFIG_RTC_DRV_CPCAP) += rtc-cpcap.o
@@ -100,6 +102,7 @@ obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
obj-$(CONFIG_RTC_DRV_MAX8998) += rtc-max8998.o
obj-$(CONFIG_RTC_DRV_MC13XXX) += rtc-mc13xxx.o
obj-$(CONFIG_RTC_DRV_MCP795) += rtc-mcp795.o
+obj-$(CONFIG_RTC_DRV_MESON) += rtc-meson.o
obj-$(CONFIG_RTC_DRV_MOXART) += rtc-moxart.o
obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o
obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o
@@ -137,6 +140,7 @@ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
obj-$(CONFIG_RTC_DRV_RTD119X) += rtc-rtd119x.o
+obj-$(CONFIG_RTC_DRV_RV3028) += rtc-rv3028.o
obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o
obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
@@ -149,6 +153,7 @@ obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
obj-$(CONFIG_RTC_DRV_SC27XX) += rtc-sc27xx.o
+obj-$(CONFIG_RTC_DRV_SD3078) += rtc-sd3078.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
obj-$(CONFIG_RTC_DRV_SIRFSOC) += rtc-sirfsoc.o
obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o
diff --git a/drivers/rtc/dev.c b/drivers/rtc/dev.c
index 43d962a9c210..1d006ef4bb57 100644
--- a/drivers/rtc/dev.c
+++ b/drivers/rtc/dev.c
@@ -178,11 +178,6 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
remove_wait_queue(&rtc->irq_queue, &wait);
if (ret == 0) {
- /* Check for any data updates */
- if (rtc->ops->read_callback)
- data = rtc->ops->read_callback(rtc->dev.parent,
- data);
-
if (sizeof(int) != sizeof(long) &&
count == sizeof(unsigned int))
ret = put_user(data, (unsigned int __user *)buf) ?:
diff --git a/drivers/rtc/lib.c b/drivers/rtc/lib.c
index ef160da84220..9714cb3d1e29 100644
--- a/drivers/rtc/lib.c
+++ b/drivers/rtc/lib.c
@@ -100,7 +100,7 @@ int rtc_valid_tm(struct rtc_time *tm)
if (tm->tm_year < 70
|| ((unsigned)tm->tm_mon) >= 12
|| tm->tm_mday < 1
- || tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900)
+ || tm->tm_mday > rtc_month_days(tm->tm_mon, ((unsigned)tm->tm_year + 1900))
|| ((unsigned)tm->tm_hour) >= 24
|| ((unsigned)tm->tm_min) >= 60
|| ((unsigned)tm->tm_sec) >= 60)
@@ -116,8 +116,8 @@ EXPORT_SYMBOL(rtc_valid_tm);
*/
time64_t rtc_tm_to_time64(struct rtc_time *tm)
{
- return mktime64(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
+ return mktime64(((unsigned)tm->tm_year + 1900), tm->tm_mon + 1,
+ tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec);
}
EXPORT_SYMBOL(rtc_tm_to_time64);
diff --git a/drivers/rtc/rtc-88pm80x.c b/drivers/rtc/rtc-88pm80x.c
index cab293cb2bf0..1fc48ebd3cd0 100644
--- a/drivers/rtc/rtc-88pm80x.c
+++ b/drivers/rtc/rtc-88pm80x.c
@@ -114,12 +114,14 @@ static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
unsigned char buf[4];
unsigned long ticks, base, data;
regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
- base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
/* load 32-bit read-only counter */
regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -137,7 +139,8 @@ static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
/* load 32-bit read-only counter */
regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
base = ticks - data;
dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -158,11 +161,13 @@ static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
int ret;
regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
- base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -185,12 +190,14 @@ static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
- base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
/* load 32-bit read-only counter */
regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index 01ffc0ef8033..d25282b4a7dd 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -115,11 +115,13 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+ base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+ (buf[5] << 8) | buf[7];
/* load 32-bit read-only counter */
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -145,7 +147,8 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
/* load 32-bit read-only counter */
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
base = ticks - data;
dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -170,10 +173,12 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+ base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+ (buf[5] << 8) | buf[7];
pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
@@ -198,11 +203,13 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+ base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+ (buf[5] << 8) | buf[7];
/* load 32-bit read-only counter */
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
ticks = base + data;
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
base, data, ticks);
diff --git a/drivers/rtc/rtc-ab-eoz9.c b/drivers/rtc/rtc-ab-eoz9.c
new file mode 100644
index 000000000000..e4f6e0061ccf
--- /dev/null
+++ b/drivers/rtc/rtc-ab-eoz9.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock driver for AB-RTCMC-32.768kHz-EOZ9 chip.
+ * Copyright (C) 2019 Orolia
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ABEOZ9_REG_CTRL1 0x00
+#define ABEOZ9_REG_CTRL1_MASK GENMASK(7, 0)
+#define ABEOZ9_REG_CTRL1_WE BIT(0)
+#define ABEOZ9_REG_CTRL1_TE BIT(1)
+#define ABEOZ9_REG_CTRL1_TAR BIT(2)
+#define ABEOZ9_REG_CTRL1_EERE BIT(3)
+#define ABEOZ9_REG_CTRL1_SRON BIT(4)
+#define ABEOZ9_REG_CTRL1_TD0 BIT(5)
+#define ABEOZ9_REG_CTRL1_TD1 BIT(6)
+#define ABEOZ9_REG_CTRL1_CLKINT BIT(7)
+
+#define ABEOZ9_REG_CTRL_INT 0x01
+#define ABEOZ9_REG_CTRL_INT_AIE BIT(0)
+#define ABEOZ9_REG_CTRL_INT_TIE BIT(1)
+#define ABEOZ9_REG_CTRL_INT_V1IE BIT(2)
+#define ABEOZ9_REG_CTRL_INT_V2IE BIT(3)
+#define ABEOZ9_REG_CTRL_INT_SRIE BIT(4)
+
+#define ABEOZ9_REG_CTRL_INT_FLAG 0x02
+#define ABEOZ9_REG_CTRL_INT_FLAG_AF BIT(0)
+#define ABEOZ9_REG_CTRL_INT_FLAG_TF BIT(1)
+#define ABEOZ9_REG_CTRL_INT_FLAG_V1IF BIT(2)
+#define ABEOZ9_REG_CTRL_INT_FLAG_V2IF BIT(3)
+#define ABEOZ9_REG_CTRL_INT_FLAG_SRF BIT(4)
+
+#define ABEOZ9_REG_CTRL_STATUS 0x03
+#define ABEOZ9_REG_CTRL_STATUS_V1F BIT(2)
+#define ABEOZ9_REG_CTRL_STATUS_V2F BIT(3)
+#define ABEOZ9_REG_CTRL_STATUS_SR BIT(4)
+#define ABEOZ9_REG_CTRL_STATUS_PON BIT(5)
+#define ABEOZ9_REG_CTRL_STATUS_EEBUSY BIT(7)
+
+#define ABEOZ9_REG_SEC 0x08
+#define ABEOZ9_REG_MIN 0x09
+#define ABEOZ9_REG_HOURS 0x0A
+#define ABEOZ9_HOURS_PM BIT(6)
+#define ABEOZ9_REG_DAYS 0x0B
+#define ABEOZ9_REG_WEEKDAYS 0x0C
+#define ABEOZ9_REG_MONTHS 0x0D
+#define ABEOZ9_REG_YEARS 0x0E
+
+#define ABEOZ9_SEC_LEN 7
+
+#define ABEOZ9_REG_REG_TEMP 0x20
+#define ABEOZ953_TEMP_MAX 120
+#define ABEOZ953_TEMP_MIN -60
+
+#define ABEOZ9_REG_EEPROM 0x30
+#define ABEOZ9_REG_EEPROM_MASK GENMASK(8, 0)
+#define ABEOZ9_REG_EEPROM_THP BIT(0)
+#define ABEOZ9_REG_EEPROM_THE BIT(1)
+#define ABEOZ9_REG_EEPROM_FD0 BIT(2)
+#define ABEOZ9_REG_EEPROM_FD1 BIT(3)
+#define ABEOZ9_REG_EEPROM_R1K BIT(4)
+#define ABEOZ9_REG_EEPROM_R5K BIT(5)
+#define ABEOZ9_REG_EEPROM_R20K BIT(6)
+#define ABEOZ9_REG_EEPROM_R80K BIT(7)
+
+struct abeoz9_rtc_data {
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+ struct device *hwmon_dev;
+};
+
+static int abeoz9_check_validity(struct device *dev)
+{
+ struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ int ret;
+ int val;
+
+ ret = regmap_read(regmap, ABEOZ9_REG_CTRL_STATUS, &val);
+ if (ret < 0) {
+ dev_err(dev,
+ "unable to get CTRL_STATUS register (%d)\n", ret);
+ return ret;
+ }
+
+ if (val & ABEOZ9_REG_CTRL_STATUS_PON) {
+ dev_warn(dev, "power-on reset detected, date is invalid\n");
+ return -EINVAL;
+ }
+
+ if (val & ABEOZ9_REG_CTRL_STATUS_V1F) {
+ dev_warn(dev,
+ "voltage drops below VLOW1 threshold, date is invalid\n");
+ return -EINVAL;
+ }
+
+ if ((val & ABEOZ9_REG_CTRL_STATUS_V2F)) {
+ dev_warn(dev,
+ "voltage drops below VLOW2 threshold, date is invalid\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int abeoz9_reset_validity(struct regmap *regmap)
+{
+ return regmap_update_bits(regmap, ABEOZ9_REG_CTRL_STATUS,
+ ABEOZ9_REG_CTRL_STATUS_V1F |
+ ABEOZ9_REG_CTRL_STATUS_V2F |
+ ABEOZ9_REG_CTRL_STATUS_PON,
+ 0);
+}
+
+static int abeoz9_rtc_get_time(struct device *dev, struct rtc_time *tm)
+{
+ struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+ u8 regs[ABEOZ9_SEC_LEN];
+ int ret;
+
+ ret = abeoz9_check_validity(dev);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, ABEOZ9_REG_SEC,
+ regs,
+ sizeof(regs));
+ if (ret) {
+ dev_err(dev, "reading RTC time failed (%d)\n", ret);
+ return ret;
+ }
+
+ tm->tm_sec = bcd2bin(regs[ABEOZ9_REG_SEC - ABEOZ9_REG_SEC] & 0x7F);
+ tm->tm_min = bcd2bin(regs[ABEOZ9_REG_MIN - ABEOZ9_REG_SEC] & 0x7F);
+
+ if (regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & ABEOZ9_HOURS_PM) {
+ tm->tm_hour =
+ bcd2bin(regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & 0x1f);
+ if (regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & ABEOZ9_HOURS_PM)
+ tm->tm_hour += 12;
+ } else {
+ tm->tm_hour = bcd2bin(regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC]);
+ }
+
+ tm->tm_mday = bcd2bin(regs[ABEOZ9_REG_DAYS - ABEOZ9_REG_SEC]);
+ tm->tm_wday = bcd2bin(regs[ABEOZ9_REG_WEEKDAYS - ABEOZ9_REG_SEC]);
+ tm->tm_mon = bcd2bin(regs[ABEOZ9_REG_MONTHS - ABEOZ9_REG_SEC]) - 1;
+ tm->tm_year = bcd2bin(regs[ABEOZ9_REG_YEARS - ABEOZ9_REG_SEC]) + 100;
+
+ return ret;
+}
+
+static int abeoz9_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ u8 regs[ABEOZ9_SEC_LEN];
+ int ret;
+
+ regs[ABEOZ9_REG_SEC - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_sec);
+ regs[ABEOZ9_REG_MIN - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_min);
+ regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_hour);
+ regs[ABEOZ9_REG_DAYS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_mday);
+ regs[ABEOZ9_REG_WEEKDAYS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_wday);
+ regs[ABEOZ9_REG_MONTHS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_mon + 1);
+ regs[ABEOZ9_REG_YEARS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_year - 100);
+
+ ret = regmap_bulk_write(data->regmap, ABEOZ9_REG_SEC,
+ regs,
+ sizeof(regs));
+
+ if (ret) {
+ dev_err(dev, "set RTC time failed (%d)\n", ret);
+ return ret;
+ }
+
+ return abeoz9_reset_validity(regmap);
+}
+
+static int abeoz9_trickle_parse_dt(struct device_node *node)
+{
+ u32 ohms = 0;
+
+ if (of_property_read_u32(node, "trickle-resistor-ohms", &ohms))
+ return 0;
+
+ switch (ohms) {
+ case 1000:
+ return ABEOZ9_REG_EEPROM_R1K;
+ case 5000:
+ return ABEOZ9_REG_EEPROM_R5K;
+ case 20000:
+ return ABEOZ9_REG_EEPROM_R20K;
+ case 80000:
+ return ABEOZ9_REG_EEPROM_R80K;
+ default:
+ return 0;
+ }
+}
+
+static int abeoz9_rtc_setup(struct device *dev, struct device_node *node)
+{
+ struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ int ret;
+
+ /* Enable Self Recovery, Clock for Watch and EEPROM refresh functions */
+ ret = regmap_update_bits(regmap, ABEOZ9_REG_CTRL1,
+ ABEOZ9_REG_CTRL1_MASK,
+ ABEOZ9_REG_CTRL1_WE |
+ ABEOZ9_REG_CTRL1_EERE |
+ ABEOZ9_REG_CTRL1_SRON);
+ if (ret < 0) {
+ dev_err(dev, "unable to set CTRL_1 register (%d)\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(regmap, ABEOZ9_REG_CTRL_INT, 0);
+ if (ret < 0) {
+ dev_err(dev,
+ "unable to set control CTRL_INT register (%d)\n",
+ ret);
+ return ret;
+ }
+
+ ret = regmap_write(regmap, ABEOZ9_REG_CTRL_INT_FLAG, 0);
+ if (ret < 0) {
+ dev_err(dev,
+ "unable to set control CTRL_INT_FLAG register (%d)\n",
+ ret);
+ return ret;
+ }
+
+ ret = abeoz9_trickle_parse_dt(node);
+
+ /* Enable built-in termometer */
+ ret |= ABEOZ9_REG_EEPROM_THE;
+
+ ret = regmap_update_bits(regmap, ABEOZ9_REG_EEPROM,
+ ABEOZ9_REG_EEPROM_MASK,
+ ret);
+ if (ret < 0) {
+ dev_err(dev, "unable to set EEPROM register (%d)\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+ .read_time = abeoz9_rtc_get_time,
+ .set_time = abeoz9_rtc_set_time,
+};
+
+static const struct regmap_config abeoz9_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+#if IS_REACHABLE(CONFIG_HWMON)
+
+static int abeoz9z3_temp_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *temp)
+{
+ struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(regmap, ABEOZ9_REG_CTRL_STATUS, &val);
+ if (ret < 0)
+ return ret;
+
+ if ((val & ABEOZ9_REG_CTRL_STATUS_V1F) ||
+ (val & ABEOZ9_REG_CTRL_STATUS_V2F)) {
+ dev_err(dev,
+ "thermometer might be disabled due to low voltage\n");
+ return -EINVAL;
+ }
+
+ switch (attr) {
+ case hwmon_temp_input:
+ ret = regmap_read(regmap, ABEOZ9_REG_REG_TEMP, &val);
+ if (ret < 0)
+ return ret;
+ *temp = 1000 * (val + ABEOZ953_TEMP_MIN);
+ return 0;
+ case hwmon_temp_max:
+ *temp = 1000 * ABEOZ953_TEMP_MAX;
+ return 0;
+ case hwmon_temp_min:
+ *temp = 1000 * ABEOZ953_TEMP_MIN;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t abeoz9_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_max:
+ case hwmon_temp_min:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static const u32 abeoz9_chip_config[] = {
+ HWMON_C_REGISTER_TZ,
+ 0
+};
+
+static const struct hwmon_channel_info abeoz9_chip = {
+ .type = hwmon_chip,
+ .config = abeoz9_chip_config,
+};
+
+static const u32 abeoz9_temp_config[] = {
+ HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN,
+ 0
+};
+
+static const struct hwmon_channel_info abeoz9_temp = {
+ .type = hwmon_temp,
+ .config = abeoz9_temp_config,
+};
+
+static const struct hwmon_channel_info *abeoz9_info[] = {
+ &abeoz9_chip,
+ &abeoz9_temp,
+ NULL
+};
+
+static const struct hwmon_ops abeoz9_hwmon_ops = {
+ .is_visible = abeoz9_is_visible,
+ .read = abeoz9z3_temp_read,
+};
+
+static const struct hwmon_chip_info abeoz9_chip_info = {
+ .ops = &abeoz9_hwmon_ops,
+ .info = abeoz9_info,
+};
+
+static void abeoz9_hwmon_register(struct device *dev,
+ struct abeoz9_rtc_data *data)
+{
+ data->hwmon_dev =
+ devm_hwmon_device_register_with_info(dev,
+ "abeoz9",
+ data,
+ &abeoz9_chip_info,
+ NULL);
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_warn(dev, "unable to register hwmon device %ld\n",
+ PTR_ERR(data->hwmon_dev));
+ }
+}
+
+#else
+
+static void abeoz9_hwmon_register(struct device *dev,
+ struct abeoz9_rtc_data *data)
+{
+}
+
+#endif
+
+static int abeoz9_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct abeoz9_rtc_data *data = NULL;
+ struct device *dev = &client->dev;
+ struct regmap *regmap;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &abeoz9_rtc_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "regmap allocation failed: %d\n", ret);
+ goto err;
+ }
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->regmap = regmap;
+ dev_set_drvdata(dev, data);
+
+ ret = abeoz9_rtc_setup(dev, client->dev.of_node);
+ if (ret)
+ goto err;
+
+ data->rtc = devm_rtc_allocate_device(dev);
+ ret = PTR_ERR_OR_ZERO(data->rtc);
+ if (ret)
+ goto err;
+
+ data->rtc->ops = &rtc_ops;
+ data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ data->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+ ret = rtc_register_device(data->rtc);
+ if (ret)
+ goto err;
+
+ abeoz9_hwmon_register(dev, data);
+ return 0;
+
+err:
+ dev_err(dev, "unable to register RTC device (%d)\n", ret);
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id abeoz9_dt_match[] = {
+ { .compatible = "abracon,abeoz9" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, abeoz9_dt_match);
+#endif
+
+static const struct i2c_device_id abeoz9_id[] = {
+ { "abeoz9", 0 },
+ { }
+};
+
+static struct i2c_driver abeoz9_driver = {
+ .driver = {
+ .name = "rtc-ab-eoz9",
+ .of_match_table = of_match_ptr(abeoz9_dt_match),
+ },
+ .probe = abeoz9_probe,
+ .id_table = abeoz9_id,
+};
+
+module_i2c_driver(abeoz9_driver);
+
+MODULE_AUTHOR("Artem Panfilov <panfilov.artyom@gmail.com>");
+MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-EOZ9 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 4d24f7288ad7..6ddcad642d1e 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -5,7 +5,7 @@
* Copyright 2014-2015 Macq S.A.
*
* Author: Philippe De Muyter <phdm@macqel.be>
- * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -46,6 +46,9 @@
#define ABX8XX_CTRL_ARST BIT(2)
#define ABX8XX_CTRL_12_24 BIT(6)
+#define ABX8XX_REG_CTRL2 0x11
+#define ABX8XX_CTRL2_RSVD BIT(5)
+
#define ABX8XX_REG_IRQ 0x12
#define ABX8XX_IRQ_AIE BIT(2)
#define ABX8XX_IRQ_IM_1_4 (0x3 << 5)
@@ -78,6 +81,9 @@
#define ABX8XX_REG_ID0 0x28
+#define ABX8XX_REG_OUT_CTRL 0x30
+#define ABX8XX_OUT_CTRL_EXDS BIT(4)
+
#define ABX8XX_REG_TRICKLE 0x20
#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0
#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
@@ -86,7 +92,7 @@
static u8 trickle_resistors[] = {0, 3, 6, 11};
enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
- AB1801, AB1803, AB1804, AB1805, ABX80X};
+ AB1801, AB1803, AB1804, AB1805, RV1805, ABX80X};
struct abx80x_cap {
u16 pn;
@@ -103,6 +109,7 @@ static struct abx80x_cap abx80x_caps[] = {
[AB1803] = {.pn = 0x1803},
[AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true},
[AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
+ [RV1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
[ABX80X] = {.pn = 0}
};
@@ -723,6 +730,62 @@ static int abx80x_probe(struct i2c_client *client,
return -EIO;
}
+ /* Configure RV1805 specifics */
+ if (part == RV1805) {
+ /*
+ * Avoid accidentally entering test mode. This can happen
+ * on the RV1805 in case the reserved bit 5 in control2
+ * register is set. RV-1805-C3 datasheet indicates that
+ * the bit should be cleared in section 11h - Control2.
+ */
+ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL2);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "Unable to read control2 register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL2,
+ data & ~ABX8XX_CTRL2_RSVD);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write control2 register\n");
+ return -EIO;
+ }
+
+ /*
+ * Avoid extra power leakage. The RV1805 uses smaller
+ * 10pin package and the EXTI input is not present.
+ * Disable it to avoid leakage.
+ */
+ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OUT_CTRL);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "Unable to read output control register\n");
+ return -EIO;
+ }
+
+ /*
+ * Write the configuration key register to enable access to
+ * the config2 register
+ */
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_MISC);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write configuration key\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL,
+ data | ABX8XX_OUT_CTRL_EXDS);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write output control register\n");
+ return -EIO;
+ }
+ }
+
/* part autodetection */
if (part == ABX80X) {
for (i = 0; abx80x_caps[i].pn; i++)
@@ -826,7 +889,7 @@ static const struct i2c_device_id abx80x_id[] = {
{ "ab1803", AB1803 },
{ "ab1804", AB1804 },
{ "ab1805", AB1805 },
- { "rv1805", AB1805 },
+ { "rv1805", RV1805 },
{ }
};
MODULE_DEVICE_TABLE(i2c, abx80x_id);
@@ -843,6 +906,6 @@ static struct i2c_driver abx80x_driver = {
module_i2c_driver(abx80x_driver);
MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
-MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
MODULE_DESCRIPTION("Abracon ABX80X RTC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-cadence.c b/drivers/rtc/rtc-cadence.c
new file mode 100644
index 000000000000..3b7d643c8a63
--- /dev/null
+++ b/drivers/rtc/rtc-cadence.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2019 Cadence
+ *
+ * Authors:
+ * Jan Kotas <jank@cadence.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/rtc.h>
+#include <linux/clk.h>
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/interrupt.h>
+#include <linux/pm_wakeirq.h>
+
+/* Registers */
+#define CDNS_RTC_CTLR 0x00
+#define CDNS_RTC_HMR 0x04
+#define CDNS_RTC_TIMR 0x08
+#define CDNS_RTC_CALR 0x0C
+#define CDNS_RTC_TIMAR 0x10
+#define CDNS_RTC_CALAR 0x14
+#define CDNS_RTC_AENR 0x18
+#define CDNS_RTC_EFLR 0x1C
+#define CDNS_RTC_IENR 0x20
+#define CDNS_RTC_IDISR 0x24
+#define CDNS_RTC_IMSKR 0x28
+#define CDNS_RTC_STSR 0x2C
+#define CDNS_RTC_KRTCR 0x30
+
+/* Control */
+#define CDNS_RTC_CTLR_TIME BIT(0)
+#define CDNS_RTC_CTLR_CAL BIT(1)
+#define CDNS_RTC_CTLR_TIME_CAL (CDNS_RTC_CTLR_TIME | CDNS_RTC_CTLR_CAL)
+
+/* Status */
+#define CDNS_RTC_STSR_VT BIT(0)
+#define CDNS_RTC_STSR_VC BIT(1)
+#define CDNS_RTC_STSR_VTA BIT(2)
+#define CDNS_RTC_STSR_VCA BIT(3)
+#define CDNS_RTC_STSR_VT_VC (CDNS_RTC_STSR_VT | CDNS_RTC_STSR_VC)
+#define CDNS_RTC_STSR_VTA_VCA (CDNS_RTC_STSR_VTA | CDNS_RTC_STSR_VCA)
+
+/* Keep RTC */
+#define CDNS_RTC_KRTCR_KRTC BIT(0)
+
+/* Alarm, Event, Interrupt */
+#define CDNS_RTC_AEI_HOS BIT(0)
+#define CDNS_RTC_AEI_SEC BIT(1)
+#define CDNS_RTC_AEI_MIN BIT(2)
+#define CDNS_RTC_AEI_HOUR BIT(3)
+#define CDNS_RTC_AEI_DATE BIT(4)
+#define CDNS_RTC_AEI_MNTH BIT(5)
+#define CDNS_RTC_AEI_ALRM BIT(6)
+
+/* Time */
+#define CDNS_RTC_TIME_H GENMASK(7, 0)
+#define CDNS_RTC_TIME_S GENMASK(14, 8)
+#define CDNS_RTC_TIME_M GENMASK(22, 16)
+#define CDNS_RTC_TIME_HR GENMASK(29, 24)
+#define CDNS_RTC_TIME_PM BIT(30)
+#define CDNS_RTC_TIME_CH BIT(31)
+
+/* Calendar */
+#define CDNS_RTC_CAL_DAY GENMASK(2, 0)
+#define CDNS_RTC_CAL_M GENMASK(7, 3)
+#define CDNS_RTC_CAL_D GENMASK(13, 8)
+#define CDNS_RTC_CAL_Y GENMASK(23, 16)
+#define CDNS_RTC_CAL_C GENMASK(29, 24)
+#define CDNS_RTC_CAL_CH BIT(31)
+
+#define CDNS_RTC_MAX_REGS_TRIES 3
+
+struct cdns_rtc {
+ struct rtc_device *rtc_dev;
+ struct clk *pclk;
+ struct clk *ref_clk;
+ void __iomem *regs;
+ int irq;
+};
+
+static void cdns_rtc_set_enabled(struct cdns_rtc *crtc, bool enabled)
+{
+ u32 reg = enabled ? 0x0 : CDNS_RTC_CTLR_TIME_CAL;
+
+ writel(reg, crtc->regs + CDNS_RTC_CTLR);
+}
+
+static bool cdns_rtc_get_enabled(struct cdns_rtc *crtc)
+{
+ return !(readl(crtc->regs + CDNS_RTC_CTLR) & CDNS_RTC_CTLR_TIME_CAL);
+}
+
+static irqreturn_t cdns_rtc_irq_handler(int irq, void *id)
+{
+ struct device *dev = id;
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+
+ /* Reading the register clears it */
+ if (!(readl(crtc->regs + CDNS_RTC_EFLR) & CDNS_RTC_AEI_ALRM))
+ return IRQ_NONE;
+
+ rtc_update_irq(crtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static u32 cdns_rtc_time2reg(struct rtc_time *tm)
+{
+ return FIELD_PREP(CDNS_RTC_TIME_S, bin2bcd(tm->tm_sec))
+ | FIELD_PREP(CDNS_RTC_TIME_M, bin2bcd(tm->tm_min))
+ | FIELD_PREP(CDNS_RTC_TIME_HR, bin2bcd(tm->tm_hour));
+}
+
+static void cdns_rtc_reg2time(u32 reg, struct rtc_time *tm)
+{
+ tm->tm_sec = bcd2bin(FIELD_GET(CDNS_RTC_TIME_S, reg));
+ tm->tm_min = bcd2bin(FIELD_GET(CDNS_RTC_TIME_M, reg));
+ tm->tm_hour = bcd2bin(FIELD_GET(CDNS_RTC_TIME_HR, reg));
+}
+
+static int cdns_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+ u32 reg;
+
+ /* If the RTC is disabled, assume the values are invalid */
+ if (!cdns_rtc_get_enabled(crtc))
+ return -EINVAL;
+
+ cdns_rtc_set_enabled(crtc, false);
+
+ reg = readl(crtc->regs + CDNS_RTC_TIMR);
+ cdns_rtc_reg2time(reg, tm);
+
+ reg = readl(crtc->regs + CDNS_RTC_CALR);
+ tm->tm_mday = bcd2bin(FIELD_GET(CDNS_RTC_CAL_D, reg));
+ tm->tm_mon = bcd2bin(FIELD_GET(CDNS_RTC_CAL_M, reg)) - 1;
+ tm->tm_year = bcd2bin(FIELD_GET(CDNS_RTC_CAL_Y, reg))
+ + bcd2bin(FIELD_GET(CDNS_RTC_CAL_C, reg)) * 100 - 1900;
+ tm->tm_wday = bcd2bin(FIELD_GET(CDNS_RTC_CAL_DAY, reg)) - 1;
+
+ cdns_rtc_set_enabled(crtc, true);
+ return 0;
+}
+
+static int cdns_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+ u32 timr, calr, stsr;
+ int ret = -EIO;
+ int year = tm->tm_year + 1900;
+ int tries;
+
+ cdns_rtc_set_enabled(crtc, false);
+
+ timr = cdns_rtc_time2reg(tm);
+
+ calr = FIELD_PREP(CDNS_RTC_CAL_D, bin2bcd(tm->tm_mday))
+ | FIELD_PREP(CDNS_RTC_CAL_M, bin2bcd(tm->tm_mon + 1))
+ | FIELD_PREP(CDNS_RTC_CAL_Y, bin2bcd(year % 100))
+ | FIELD_PREP(CDNS_RTC_CAL_C, bin2bcd(year / 100))
+ | FIELD_PREP(CDNS_RTC_CAL_DAY, tm->tm_wday + 1);
+
+ /* Update registers, check valid flags */
+ for (tries = 0; tries < CDNS_RTC_MAX_REGS_TRIES; tries++) {
+ writel(timr, crtc->regs + CDNS_RTC_TIMR);
+ writel(calr, crtc->regs + CDNS_RTC_CALR);
+ stsr = readl(crtc->regs + CDNS_RTC_STSR);
+
+ if ((stsr & CDNS_RTC_STSR_VT_VC) == CDNS_RTC_STSR_VT_VC) {
+ ret = 0;
+ break;
+ }
+ }
+
+ cdns_rtc_set_enabled(crtc, true);
+ return ret;
+}
+
+static int cdns_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+
+ if (enabled) {
+ writel((CDNS_RTC_AEI_SEC | CDNS_RTC_AEI_MIN | CDNS_RTC_AEI_HOUR
+ | CDNS_RTC_AEI_DATE | CDNS_RTC_AEI_MNTH),
+ crtc->regs + CDNS_RTC_AENR);
+ writel(CDNS_RTC_AEI_ALRM, crtc->regs + CDNS_RTC_IENR);
+ } else {
+ writel(0, crtc->regs + CDNS_RTC_AENR);
+ writel(CDNS_RTC_AEI_ALRM, crtc->regs + CDNS_RTC_IDISR);
+ }
+
+ return 0;
+}
+
+static int cdns_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+ u32 reg;
+
+ reg = readl(crtc->regs + CDNS_RTC_TIMAR);
+ cdns_rtc_reg2time(reg, &alarm->time);
+
+ reg = readl(crtc->regs + CDNS_RTC_CALAR);
+ alarm->time.tm_mday = bcd2bin(FIELD_GET(CDNS_RTC_CAL_D, reg));
+ alarm->time.tm_mon = bcd2bin(FIELD_GET(CDNS_RTC_CAL_M, reg)) - 1;
+
+ return 0;
+}
+
+static int cdns_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+ int ret = -EIO;
+ int tries;
+ u32 timar, calar, stsr;
+
+ cdns_rtc_alarm_irq_enable(dev, 0);
+
+ timar = cdns_rtc_time2reg(&alarm->time);
+ calar = FIELD_PREP(CDNS_RTC_CAL_D, bin2bcd(alarm->time.tm_mday))
+ | FIELD_PREP(CDNS_RTC_CAL_M, bin2bcd(alarm->time.tm_mon + 1));
+
+ /* Update registers, check valid alarm flags */
+ for (tries = 0; tries < CDNS_RTC_MAX_REGS_TRIES; tries++) {
+ writel(timar, crtc->regs + CDNS_RTC_TIMAR);
+ writel(calar, crtc->regs + CDNS_RTC_CALAR);
+ stsr = readl(crtc->regs + CDNS_RTC_STSR);
+
+ if ((stsr & CDNS_RTC_STSR_VTA_VCA) == CDNS_RTC_STSR_VTA_VCA) {
+ ret = 0;
+ break;
+ }
+ }
+
+ if (!ret)
+ cdns_rtc_alarm_irq_enable(dev, alarm->enabled);
+ return ret;
+}
+
+static const struct rtc_class_ops cdns_rtc_ops = {
+ .read_time = cdns_rtc_read_time,
+ .set_time = cdns_rtc_set_time,
+ .read_alarm = cdns_rtc_read_alarm,
+ .set_alarm = cdns_rtc_set_alarm,
+ .alarm_irq_enable = cdns_rtc_alarm_irq_enable,
+};
+
+static int cdns_rtc_probe(struct platform_device *pdev)
+{
+ struct cdns_rtc *crtc;
+ struct resource *res;
+ int ret;
+ unsigned long ref_clk_freq;
+
+ crtc = devm_kzalloc(&pdev->dev, sizeof(*crtc), GFP_KERNEL);
+ if (!crtc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ crtc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(crtc->regs))
+ return PTR_ERR(crtc->regs);
+
+ crtc->irq = platform_get_irq(pdev, 0);
+ if (crtc->irq < 0)
+ return -EINVAL;
+
+ crtc->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(crtc->pclk)) {
+ ret = PTR_ERR(crtc->pclk);
+ dev_err(&pdev->dev,
+ "Failed to retrieve the peripheral clock, %d\n", ret);
+ return ret;
+ }
+
+ crtc->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (IS_ERR(crtc->ref_clk)) {
+ ret = PTR_ERR(crtc->ref_clk);
+ dev_err(&pdev->dev,
+ "Failed to retrieve the reference clock, %d\n", ret);
+ return ret;
+ }
+
+ crtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(crtc->rtc_dev)) {
+ ret = PTR_ERR(crtc->rtc_dev);
+ dev_err(&pdev->dev,
+ "Failed to allocate the RTC device, %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, crtc);
+
+ ret = clk_prepare_enable(crtc->pclk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable the peripheral clock, %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(crtc->ref_clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable the reference clock, %d\n", ret);
+ goto err_disable_pclk;
+ }
+
+ ref_clk_freq = clk_get_rate(crtc->ref_clk);
+ if ((ref_clk_freq != 1) && (ref_clk_freq != 100)) {
+ dev_err(&pdev->dev,
+ "Invalid reference clock frequency %lu Hz.\n",
+ ref_clk_freq);
+ ret = -EINVAL;
+ goto err_disable_ref_clk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, crtc->irq,
+ cdns_rtc_irq_handler, 0,
+ dev_name(&pdev->dev), &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request interrupt for the device, %d\n",
+ ret);
+ goto err_disable_ref_clk;
+ }
+
+ /* The RTC supports 01.01.1900 - 31.12.2999 */
+ crtc->rtc_dev->range_min = mktime64(1900, 1, 1, 0, 0, 0);
+ crtc->rtc_dev->range_max = mktime64(2999, 12, 31, 23, 59, 59);
+
+ crtc->rtc_dev->ops = &cdns_rtc_ops;
+ device_init_wakeup(&pdev->dev, true);
+
+ /* Always use 24-hour mode and keep the RTC values */
+ writel(0, crtc->regs + CDNS_RTC_HMR);
+ writel(CDNS_RTC_KRTCR_KRTC, crtc->regs + CDNS_RTC_KRTCR);
+
+ ret = rtc_register_device(crtc->rtc_dev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to register the RTC device, %d\n", ret);
+ goto err_disable_wakeup;
+ }
+
+ return 0;
+
+err_disable_wakeup:
+ device_init_wakeup(&pdev->dev, false);
+
+err_disable_ref_clk:
+ clk_disable_unprepare(crtc->ref_clk);
+
+err_disable_pclk:
+ clk_disable_unprepare(crtc->pclk);
+
+ return ret;
+}
+
+static int cdns_rtc_remove(struct platform_device *pdev)
+{
+ struct cdns_rtc *crtc = platform_get_drvdata(pdev);
+
+ cdns_rtc_alarm_irq_enable(&pdev->dev, 0);
+ device_init_wakeup(&pdev->dev, 0);
+
+ clk_disable_unprepare(crtc->pclk);
+ clk_disable_unprepare(crtc->ref_clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cdns_rtc_suspend(struct device *dev)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(crtc->irq);
+
+ return 0;
+}
+
+static int cdns_rtc_resume(struct device *dev)
+{
+ struct cdns_rtc *crtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(crtc->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cdns_rtc_pm_ops, cdns_rtc_suspend, cdns_rtc_resume);
+
+static const struct of_device_id cdns_rtc_of_match[] = {
+ { .compatible = "cdns,rtc-r109v3" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, cdns_rtc_of_match);
+
+static struct platform_driver cdns_rtc_driver = {
+ .driver = {
+ .name = "cdns-rtc",
+ .of_match_table = cdns_rtc_of_match,
+ .pm = &cdns_rtc_pm_ops,
+ },
+ .probe = cdns_rtc_probe,
+ .remove = cdns_rtc_remove,
+};
+module_platform_driver(cdns_rtc_driver);
+
+MODULE_AUTHOR("Jan Kotas <jank@cadence.com>");
+MODULE_DESCRIPTION("Cadence RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cdns-rtc");
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index fc5cf5c44ae7..0b232c84f674 100644
--- a/drivers/rtc/rtc-coh901331.c
+++ b/drivers/rtc/rtc-coh901331.c
@@ -235,9 +235,13 @@ static int coh901331_suspend(struct device *dev)
static int coh901331_resume(struct device *dev)
{
+ int ret;
struct coh901331_port *rtap = dev_get_drvdata(dev);
- clk_prepare(rtap->clk);
+ ret = clk_prepare(rtap->clk);
+ if (ret)
+ return ret;
+
if (device_may_wakeup(dev)) {
disable_irq_wake(rtap->irq);
} else {
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 74b31dce484f..07530fe1da2a 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -114,6 +114,33 @@ enum ds_type {
# define RX8025_BIT_VDET 0x40
# define RX8025_BIT_XST 0x20
+#define RX8130_REG_ALARM_MIN 0x17
+#define RX8130_REG_ALARM_HOUR 0x18
+#define RX8130_REG_ALARM_WEEK_OR_DAY 0x19
+#define RX8130_REG_EXTENSION 0x1c
+#define RX8130_REG_EXTENSION_WADA BIT(3)
+#define RX8130_REG_FLAG 0x1d
+#define RX8130_REG_FLAG_VLF BIT(1)
+#define RX8130_REG_FLAG_AF BIT(3)
+#define RX8130_REG_CONTROL0 0x1e
+#define RX8130_REG_CONTROL0_AIE BIT(3)
+
+#define MCP794XX_REG_CONTROL 0x07
+# define MCP794XX_BIT_ALM0_EN 0x10
+# define MCP794XX_BIT_ALM1_EN 0x20
+#define MCP794XX_REG_ALARM0_BASE 0x0a
+#define MCP794XX_REG_ALARM0_CTRL 0x0d
+#define MCP794XX_REG_ALARM1_BASE 0x11
+#define MCP794XX_REG_ALARM1_CTRL 0x14
+# define MCP794XX_BIT_ALMX_IF BIT(3)
+# define MCP794XX_BIT_ALMX_C0 BIT(4)
+# define MCP794XX_BIT_ALMX_C1 BIT(5)
+# define MCP794XX_BIT_ALMX_C2 BIT(6)
+# define MCP794XX_BIT_ALMX_POL BIT(7)
+# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
+ MCP794XX_BIT_ALMX_C1 | \
+ MCP794XX_BIT_ALMX_C2)
+
#define M41TXX_REG_CONTROL 0x07
# define M41TXX_BIT_OUT BIT(7)
# define M41TXX_BIT_FT BIT(6)
@@ -158,289 +185,7 @@ struct chip_desc {
bool);
};
-static int ds1307_get_time(struct device *dev, struct rtc_time *t);
-static int ds1307_set_time(struct device *dev, struct rtc_time *t);
-static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled);
-static u8 do_trickle_setup_ds1339(struct ds1307 *, u32 ohms, bool diode);
-static irqreturn_t rx8130_irq(int irq, void *dev_id);
-static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled);
-static irqreturn_t mcp794xx_irq(int irq, void *dev_id);
-static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t);
-static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled);
-static int m41txx_rtc_read_offset(struct device *dev, long *offset);
-static int m41txx_rtc_set_offset(struct device *dev, long offset);
-
-static const struct rtc_class_ops rx8130_rtc_ops = {
- .read_time = ds1307_get_time,
- .set_time = ds1307_set_time,
- .read_alarm = rx8130_read_alarm,
- .set_alarm = rx8130_set_alarm,
- .alarm_irq_enable = rx8130_alarm_irq_enable,
-};
-
-static const struct rtc_class_ops mcp794xx_rtc_ops = {
- .read_time = ds1307_get_time,
- .set_time = ds1307_set_time,
- .read_alarm = mcp794xx_read_alarm,
- .set_alarm = mcp794xx_set_alarm,
- .alarm_irq_enable = mcp794xx_alarm_irq_enable,
-};
-
-static const struct rtc_class_ops m41txx_rtc_ops = {
- .read_time = ds1307_get_time,
- .set_time = ds1307_set_time,
- .read_alarm = ds1337_read_alarm,
- .set_alarm = ds1337_set_alarm,
- .alarm_irq_enable = ds1307_alarm_irq_enable,
- .read_offset = m41txx_rtc_read_offset,
- .set_offset = m41txx_rtc_set_offset,
-};
-
-static const struct chip_desc chips[last_ds_type] = {
- [ds_1307] = {
- .nvram_offset = 8,
- .nvram_size = 56,
- },
- [ds_1308] = {
- .nvram_offset = 8,
- .nvram_size = 56,
- },
- [ds_1337] = {
- .alarm = 1,
- .century_reg = DS1307_REG_MONTH,
- .century_bit = DS1337_BIT_CENTURY,
- },
- [ds_1338] = {
- .nvram_offset = 8,
- .nvram_size = 56,
- },
- [ds_1339] = {
- .alarm = 1,
- .century_reg = DS1307_REG_MONTH,
- .century_bit = DS1337_BIT_CENTURY,
- .bbsqi_bit = DS1339_BIT_BBSQI,
- .trickle_charger_reg = 0x10,
- .do_trickle_setup = &do_trickle_setup_ds1339,
- },
- [ds_1340] = {
- .century_reg = DS1307_REG_HOUR,
- .century_enable_bit = DS1340_BIT_CENTURY_EN,
- .century_bit = DS1340_BIT_CENTURY,
- .do_trickle_setup = &do_trickle_setup_ds1339,
- .trickle_charger_reg = 0x08,
- },
- [ds_1341] = {
- .century_reg = DS1307_REG_MONTH,
- .century_bit = DS1337_BIT_CENTURY,
- },
- [ds_1388] = {
- .offset = 1,
- .trickle_charger_reg = 0x0a,
- },
- [ds_3231] = {
- .alarm = 1,
- .century_reg = DS1307_REG_MONTH,
- .century_bit = DS1337_BIT_CENTURY,
- .bbsqi_bit = DS3231_BIT_BBSQW,
- },
- [rx_8130] = {
- .alarm = 1,
- /* this is battery backed SRAM */
- .nvram_offset = 0x20,
- .nvram_size = 4, /* 32bit (4 word x 8 bit) */
- .offset = 0x10,
- .irq_handler = rx8130_irq,
- .rtc_ops = &rx8130_rtc_ops,
- },
- [m41t0] = {
- .rtc_ops = &m41txx_rtc_ops,
- },
- [m41t00] = {
- .rtc_ops = &m41txx_rtc_ops,
- },
- [m41t11] = {
- /* this is battery backed SRAM */
- .nvram_offset = 8,
- .nvram_size = 56,
- .rtc_ops = &m41txx_rtc_ops,
- },
- [mcp794xx] = {
- .alarm = 1,
- /* this is battery backed SRAM */
- .nvram_offset = 0x20,
- .nvram_size = 0x40,
- .irq_handler = mcp794xx_irq,
- .rtc_ops = &mcp794xx_rtc_ops,
- },
-};
-
-static const struct i2c_device_id ds1307_id[] = {
- { "ds1307", ds_1307 },
- { "ds1308", ds_1308 },
- { "ds1337", ds_1337 },
- { "ds1338", ds_1338 },
- { "ds1339", ds_1339 },
- { "ds1388", ds_1388 },
- { "ds1340", ds_1340 },
- { "ds1341", ds_1341 },
- { "ds3231", ds_3231 },
- { "m41t0", m41t0 },
- { "m41t00", m41t00 },
- { "m41t11", m41t11 },
- { "mcp7940x", mcp794xx },
- { "mcp7941x", mcp794xx },
- { "pt7c4338", ds_1307 },
- { "rx8025", rx_8025 },
- { "isl12057", ds_1337 },
- { "rx8130", rx_8130 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ds1307_id);
-
-#ifdef CONFIG_OF
-static const struct of_device_id ds1307_of_match[] = {
- {
- .compatible = "dallas,ds1307",
- .data = (void *)ds_1307
- },
- {
- .compatible = "dallas,ds1308",
- .data = (void *)ds_1308
- },
- {
- .compatible = "dallas,ds1337",
- .data = (void *)ds_1337
- },
- {
- .compatible = "dallas,ds1338",
- .data = (void *)ds_1338
- },
- {
- .compatible = "dallas,ds1339",
- .data = (void *)ds_1339
- },
- {
- .compatible = "dallas,ds1388",
- .data = (void *)ds_1388
- },
- {
- .compatible = "dallas,ds1340",
- .data = (void *)ds_1340
- },
- {
- .compatible = "dallas,ds1341",
- .data = (void *)ds_1341
- },
- {
- .compatible = "maxim,ds3231",
- .data = (void *)ds_3231
- },
- {
- .compatible = "st,m41t0",
- .data = (void *)m41t0
- },
- {
- .compatible = "st,m41t00",
- .data = (void *)m41t00
- },
- {
- .compatible = "st,m41t11",
- .data = (void *)m41t11
- },
- {
- .compatible = "microchip,mcp7940x",
- .data = (void *)mcp794xx
- },
- {
- .compatible = "microchip,mcp7941x",
- .data = (void *)mcp794xx
- },
- {
- .compatible = "pericom,pt7c4338",
- .data = (void *)ds_1307
- },
- {
- .compatible = "epson,rx8025",
- .data = (void *)rx_8025
- },
- {
- .compatible = "isil,isl12057",
- .data = (void *)ds_1337
- },
- {
- .compatible = "epson,rx8130",
- .data = (void *)rx_8130
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, ds1307_of_match);
-#endif
-
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id ds1307_acpi_ids[] = {
- { .id = "DS1307", .driver_data = ds_1307 },
- { .id = "DS1308", .driver_data = ds_1308 },
- { .id = "DS1337", .driver_data = ds_1337 },
- { .id = "DS1338", .driver_data = ds_1338 },
- { .id = "DS1339", .driver_data = ds_1339 },
- { .id = "DS1388", .driver_data = ds_1388 },
- { .id = "DS1340", .driver_data = ds_1340 },
- { .id = "DS1341", .driver_data = ds_1341 },
- { .id = "DS3231", .driver_data = ds_3231 },
- { .id = "M41T0", .driver_data = m41t0 },
- { .id = "M41T00", .driver_data = m41t00 },
- { .id = "M41T11", .driver_data = m41t11 },
- { .id = "MCP7940X", .driver_data = mcp794xx },
- { .id = "MCP7941X", .driver_data = mcp794xx },
- { .id = "PT7C4338", .driver_data = ds_1307 },
- { .id = "RX8025", .driver_data = rx_8025 },
- { .id = "ISL12057", .driver_data = ds_1337 },
- { .id = "RX8130", .driver_data = rx_8130 },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
-#endif
-
-/*
- * The ds1337 and ds1339 both have two alarms, but we only use the first
- * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
- * signal; ds1339 chips have only one alarm signal.
- */
-static irqreturn_t ds1307_irq(int irq, void *dev_id)
-{
- struct ds1307 *ds1307 = dev_id;
- struct mutex *lock = &ds1307->rtc->ops_lock;
- int stat, ret;
-
- mutex_lock(lock);
- ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
- if (ret)
- goto out;
-
- if (stat & DS1337_BIT_A1I) {
- stat &= ~DS1337_BIT_A1I;
- regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
-
- ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
- DS1337_BIT_A1IE, 0);
- if (ret)
- goto out;
-
- rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
- }
-
-out:
- mutex_unlock(lock);
-
- return IRQ_HANDLED;
-}
-
-/*----------------------------------------------------------------------*/
+static const struct chip_desc chips[last_ds_type];
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
@@ -449,6 +194,20 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
const struct chip_desc *chip = &chips[ds1307->type];
u8 regs[7];
+ if (ds1307->type == rx_8130) {
+ unsigned int regflag;
+ ret = regmap_read(ds1307->regmap, RX8130_REG_FLAG, &regflag);
+ if (ret) {
+ dev_err(dev, "%s error %d\n", "read", ret);
+ return ret;
+ }
+
+ if (regflag & RX8130_REG_FLAG_VLF) {
+ dev_warn_once(dev, "oscillator failed, set time!\n");
+ return -EINVAL;
+ }
+ }
+
/* read the RTC date and time registers all at once */
ret = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
sizeof(regs));
@@ -548,6 +307,17 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
dev_err(dev, "%s error %d\n", "write", result);
return result;
}
+
+ if (ds1307->type == rx_8130) {
+ /* clear Voltage Loss Flag as data is available now */
+ result = regmap_write(ds1307->regmap, RX8130_REG_FLAG,
+ ~(u8)RX8130_REG_FLAG_VLF);
+ if (result) {
+ dev_err(dev, "%s error %d\n", "write", result);
+ return result;
+ }
+ }
+
return 0;
}
@@ -666,29 +436,28 @@ static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
enabled ? DS1337_BIT_A1IE : 0);
}
-static const struct rtc_class_ops ds13xx_rtc_ops = {
- .read_time = ds1307_get_time,
- .set_time = ds1307_set_time,
- .read_alarm = ds1337_read_alarm,
- .set_alarm = ds1337_set_alarm,
- .alarm_irq_enable = ds1307_alarm_irq_enable,
-};
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Alarm support for rx8130 devices.
- */
+static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
+{
+ u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
+ DS1307_TRICKLE_CHARGER_NO_DIODE;
-#define RX8130_REG_ALARM_MIN 0x07
-#define RX8130_REG_ALARM_HOUR 0x08
-#define RX8130_REG_ALARM_WEEK_OR_DAY 0x09
-#define RX8130_REG_EXTENSION 0x0c
-#define RX8130_REG_EXTENSION_WADA BIT(3)
-#define RX8130_REG_FLAG 0x0d
-#define RX8130_REG_FLAG_AF BIT(3)
-#define RX8130_REG_CONTROL0 0x0e
-#define RX8130_REG_CONTROL0_AIE BIT(3)
+ switch (ohms) {
+ case 250:
+ setup |= DS1307_TRICKLE_CHARGER_250_OHM;
+ break;
+ case 2000:
+ setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
+ break;
+ case 4000:
+ setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
+ break;
+ default:
+ dev_warn(ds1307->dev,
+ "Unsupported ohm value %u in dt\n", ohms);
+ return 0;
+ }
+ return setup;
+}
static irqreturn_t rx8130_irq(int irq, void *dev_id)
{
@@ -785,8 +554,8 @@ static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
if (ret < 0)
return ret;
- ctl[0] &= ~RX8130_REG_EXTENSION_WADA;
- ctl[1] |= RX8130_REG_FLAG_AF;
+ ctl[0] &= RX8130_REG_EXTENSION_WADA;
+ ctl[1] &= ~RX8130_REG_FLAG_AF;
ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
@@ -809,8 +578,7 @@ static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
ctl[2] |= RX8130_REG_CONTROL0_AIE;
- return regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
- sizeof(ctl));
+ return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, ctl[2]);
}
static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
@@ -833,28 +601,6 @@ static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
}
-/*----------------------------------------------------------------------*/
-
-/*
- * Alarm support for mcp794xx devices.
- */
-
-#define MCP794XX_REG_CONTROL 0x07
-# define MCP794XX_BIT_ALM0_EN 0x10
-# define MCP794XX_BIT_ALM1_EN 0x20
-#define MCP794XX_REG_ALARM0_BASE 0x0a
-#define MCP794XX_REG_ALARM0_CTRL 0x0d
-#define MCP794XX_REG_ALARM1_BASE 0x11
-#define MCP794XX_REG_ALARM1_CTRL 0x14
-# define MCP794XX_BIT_ALMX_IF BIT(3)
-# define MCP794XX_BIT_ALMX_C0 BIT(4)
-# define MCP794XX_BIT_ALMX_C1 BIT(5)
-# define MCP794XX_BIT_ALMX_C2 BIT(6)
-# define MCP794XX_BIT_ALMX_POL BIT(7)
-# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
- MCP794XX_BIT_ALMX_C1 | \
- MCP794XX_BIT_ALMX_C2)
-
static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
{
struct ds1307 *ds1307 = dev_id;
@@ -1050,6 +796,281 @@ static int m41txx_rtc_set_offset(struct device *dev, long offset)
ctrl_reg);
}
+static const struct rtc_class_ops rx8130_rtc_ops = {
+ .read_time = ds1307_get_time,
+ .set_time = ds1307_set_time,
+ .read_alarm = rx8130_read_alarm,
+ .set_alarm = rx8130_set_alarm,
+ .alarm_irq_enable = rx8130_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops mcp794xx_rtc_ops = {
+ .read_time = ds1307_get_time,
+ .set_time = ds1307_set_time,
+ .read_alarm = mcp794xx_read_alarm,
+ .set_alarm = mcp794xx_set_alarm,
+ .alarm_irq_enable = mcp794xx_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops m41txx_rtc_ops = {
+ .read_time = ds1307_get_time,
+ .set_time = ds1307_set_time,
+ .read_alarm = ds1337_read_alarm,
+ .set_alarm = ds1337_set_alarm,
+ .alarm_irq_enable = ds1307_alarm_irq_enable,
+ .read_offset = m41txx_rtc_read_offset,
+ .set_offset = m41txx_rtc_set_offset,
+};
+
+static const struct chip_desc chips[last_ds_type] = {
+ [ds_1307] = {
+ .nvram_offset = 8,
+ .nvram_size = 56,
+ },
+ [ds_1308] = {
+ .nvram_offset = 8,
+ .nvram_size = 56,
+ },
+ [ds_1337] = {
+ .alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
+ },
+ [ds_1338] = {
+ .nvram_offset = 8,
+ .nvram_size = 56,
+ },
+ [ds_1339] = {
+ .alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
+ .bbsqi_bit = DS1339_BIT_BBSQI,
+ .trickle_charger_reg = 0x10,
+ .do_trickle_setup = &do_trickle_setup_ds1339,
+ },
+ [ds_1340] = {
+ .century_reg = DS1307_REG_HOUR,
+ .century_enable_bit = DS1340_BIT_CENTURY_EN,
+ .century_bit = DS1340_BIT_CENTURY,
+ .do_trickle_setup = &do_trickle_setup_ds1339,
+ .trickle_charger_reg = 0x08,
+ },
+ [ds_1341] = {
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
+ },
+ [ds_1388] = {
+ .offset = 1,
+ .trickle_charger_reg = 0x0a,
+ },
+ [ds_3231] = {
+ .alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
+ .bbsqi_bit = DS3231_BIT_BBSQW,
+ },
+ [rx_8130] = {
+ .alarm = 1,
+ /* this is battery backed SRAM */
+ .nvram_offset = 0x20,
+ .nvram_size = 4, /* 32bit (4 word x 8 bit) */
+ .offset = 0x10,
+ .irq_handler = rx8130_irq,
+ .rtc_ops = &rx8130_rtc_ops,
+ },
+ [m41t0] = {
+ .rtc_ops = &m41txx_rtc_ops,
+ },
+ [m41t00] = {
+ .rtc_ops = &m41txx_rtc_ops,
+ },
+ [m41t11] = {
+ /* this is battery backed SRAM */
+ .nvram_offset = 8,
+ .nvram_size = 56,
+ .rtc_ops = &m41txx_rtc_ops,
+ },
+ [mcp794xx] = {
+ .alarm = 1,
+ /* this is battery backed SRAM */
+ .nvram_offset = 0x20,
+ .nvram_size = 0x40,
+ .irq_handler = mcp794xx_irq,
+ .rtc_ops = &mcp794xx_rtc_ops,
+ },
+};
+
+static const struct i2c_device_id ds1307_id[] = {
+ { "ds1307", ds_1307 },
+ { "ds1308", ds_1308 },
+ { "ds1337", ds_1337 },
+ { "ds1338", ds_1338 },
+ { "ds1339", ds_1339 },
+ { "ds1388", ds_1388 },
+ { "ds1340", ds_1340 },
+ { "ds1341", ds_1341 },
+ { "ds3231", ds_3231 },
+ { "m41t0", m41t0 },
+ { "m41t00", m41t00 },
+ { "m41t11", m41t11 },
+ { "mcp7940x", mcp794xx },
+ { "mcp7941x", mcp794xx },
+ { "pt7c4338", ds_1307 },
+ { "rx8025", rx_8025 },
+ { "isl12057", ds_1337 },
+ { "rx8130", rx_8130 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1307_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1307_of_match[] = {
+ {
+ .compatible = "dallas,ds1307",
+ .data = (void *)ds_1307
+ },
+ {
+ .compatible = "dallas,ds1308",
+ .data = (void *)ds_1308
+ },
+ {
+ .compatible = "dallas,ds1337",
+ .data = (void *)ds_1337
+ },
+ {
+ .compatible = "dallas,ds1338",
+ .data = (void *)ds_1338
+ },
+ {
+ .compatible = "dallas,ds1339",
+ .data = (void *)ds_1339
+ },
+ {
+ .compatible = "dallas,ds1388",
+ .data = (void *)ds_1388
+ },
+ {
+ .compatible = "dallas,ds1340",
+ .data = (void *)ds_1340
+ },
+ {
+ .compatible = "dallas,ds1341",
+ .data = (void *)ds_1341
+ },
+ {
+ .compatible = "maxim,ds3231",
+ .data = (void *)ds_3231
+ },
+ {
+ .compatible = "st,m41t0",
+ .data = (void *)m41t0
+ },
+ {
+ .compatible = "st,m41t00",
+ .data = (void *)m41t00
+ },
+ {
+ .compatible = "st,m41t11",
+ .data = (void *)m41t11
+ },
+ {
+ .compatible = "microchip,mcp7940x",
+ .data = (void *)mcp794xx
+ },
+ {
+ .compatible = "microchip,mcp7941x",
+ .data = (void *)mcp794xx
+ },
+ {
+ .compatible = "pericom,pt7c4338",
+ .data = (void *)ds_1307
+ },
+ {
+ .compatible = "epson,rx8025",
+ .data = (void *)rx_8025
+ },
+ {
+ .compatible = "isil,isl12057",
+ .data = (void *)ds_1337
+ },
+ {
+ .compatible = "epson,rx8130",
+ .data = (void *)rx_8130
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ds1307_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ds1307_acpi_ids[] = {
+ { .id = "DS1307", .driver_data = ds_1307 },
+ { .id = "DS1308", .driver_data = ds_1308 },
+ { .id = "DS1337", .driver_data = ds_1337 },
+ { .id = "DS1338", .driver_data = ds_1338 },
+ { .id = "DS1339", .driver_data = ds_1339 },
+ { .id = "DS1388", .driver_data = ds_1388 },
+ { .id = "DS1340", .driver_data = ds_1340 },
+ { .id = "DS1341", .driver_data = ds_1341 },
+ { .id = "DS3231", .driver_data = ds_3231 },
+ { .id = "M41T0", .driver_data = m41t0 },
+ { .id = "M41T00", .driver_data = m41t00 },
+ { .id = "M41T11", .driver_data = m41t11 },
+ { .id = "MCP7940X", .driver_data = mcp794xx },
+ { .id = "MCP7941X", .driver_data = mcp794xx },
+ { .id = "PT7C4338", .driver_data = ds_1307 },
+ { .id = "RX8025", .driver_data = rx_8025 },
+ { .id = "ISL12057", .driver_data = ds_1337 },
+ { .id = "RX8130", .driver_data = rx_8130 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
+#endif
+
+/*
+ * The ds1337 and ds1339 both have two alarms, but we only use the first
+ * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
+ * signal; ds1339 chips have only one alarm signal.
+ */
+static irqreturn_t ds1307_irq(int irq, void *dev_id)
+{
+ struct ds1307 *ds1307 = dev_id;
+ struct mutex *lock = &ds1307->rtc->ops_lock;
+ int stat, ret;
+
+ mutex_lock(lock);
+ ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
+ if (ret)
+ goto out;
+
+ if (stat & DS1337_BIT_A1I) {
+ stat &= ~DS1337_BIT_A1I;
+ regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
+
+ ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+ DS1337_BIT_A1IE, 0);
+ if (ret)
+ goto out;
+
+ rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+ }
+
+out:
+ mutex_unlock(lock);
+
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static const struct rtc_class_ops ds13xx_rtc_ops = {
+ .read_time = ds1307_get_time,
+ .set_time = ds1307_set_time,
+ .read_alarm = ds1337_read_alarm,
+ .set_alarm = ds1337_set_alarm,
+ .alarm_irq_enable = ds1307_alarm_irq_enable,
+};
+
static ssize_t frequency_test_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -1137,30 +1158,6 @@ static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
/*----------------------------------------------------------------------*/
-static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307,
- u32 ohms, bool diode)
-{
- u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
- DS1307_TRICKLE_CHARGER_NO_DIODE;
-
- switch (ohms) {
- case 250:
- setup |= DS1307_TRICKLE_CHARGER_250_OHM;
- break;
- case 2000:
- setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
- break;
- case 4000:
- setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
- break;
- default:
- dev_warn(ds1307->dev,
- "Unsupported ohm value %u in dt\n", ohms);
- return 0;
- }
- return setup;
-}
-
static u8 ds1307_trickle_init(struct ds1307 *ds1307,
const struct chip_desc *chip)
{
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c
index 9caaccccaa57..b1ebca099b0d 100644
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@@ -58,7 +58,8 @@ static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
"%s: raw read data - counters=%02x,%02x,%02x,%02x\n",
__func__, buf[0], buf[1], buf[2], buf[3]);
- time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ time = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
rtc_time_to_tm(time, tm);
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index e5ad527cb75e..d03f5d212eea 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -109,6 +109,8 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
}
ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
+ if (ret < 0)
+ return ret;
tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
diff --git a/drivers/rtc/rtc-imx-sc.c b/drivers/rtc/rtc-imx-sc.c
index 7ff08544532a..19642bfd913a 100644
--- a/drivers/rtc/rtc-imx-sc.c
+++ b/drivers/rtc/rtc-imx-sc.c
@@ -3,6 +3,7 @@
* Copyright 2018 NXP.
*/
+#include <linux/arm-smccc.h>
#include <linux/firmware/imx/sci.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -12,6 +13,9 @@
#define IMX_SC_TIMER_FUNC_GET_RTC_SEC1970 9
#define IMX_SC_TIMER_FUNC_SET_RTC_TIME 6
+#define IMX_SIP_SRTC 0xC2000002
+#define IMX_SIP_SRTC_SET_TIME 0x0
+
static struct imx_sc_ipc *rtc_ipc_handle;
static struct rtc_device *imx_sc_rtc;
@@ -37,13 +41,28 @@ static int imx_sc_rtc_read_time(struct device *dev, struct rtc_time *tm)
return ret;
}
- rtc_time_to_tm(msg.time, tm);
+ rtc_time64_to_tm(msg.time, tm);
return 0;
}
+static int imx_sc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct arm_smccc_res res;
+
+ /* pack 2 time parameters into 1 register, 16 bits for each */
+ arm_smccc_smc(IMX_SIP_SRTC, IMX_SIP_SRTC_SET_TIME,
+ ((tm->tm_year + 1900) << 16) | (tm->tm_mon + 1),
+ (tm->tm_mday << 16) | tm->tm_hour,
+ (tm->tm_min << 16) | tm->tm_sec,
+ 0, 0, 0, &res);
+
+ return res.a0;
+}
+
static const struct rtc_class_ops imx_sc_rtc_ops = {
.read_time = imx_sc_rtc_read_time,
+ .set_time = imx_sc_rtc_set_time,
};
static int imx_sc_rtc_probe(struct platform_device *pdev)
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 37ab3e1d25f5..471e395b20db 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -13,6 +13,7 @@
#include <linux/bcd.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/rtc.h>
@@ -73,10 +74,50 @@
static struct i2c_driver isl1208_driver;
/* ISL1208 various variants */
-enum {
+enum isl1208_id {
TYPE_ISL1208 = 0,
+ TYPE_ISL1209,
TYPE_ISL1218,
TYPE_ISL1219,
+ ISL_LAST_ID
+};
+
+/* Chip capabilities table */
+static const struct isl1208_config {
+ const char name[8];
+ unsigned int nvmem_length;
+ unsigned has_tamper:1;
+ unsigned has_timestamp:1;
+} isl1208_configs[] = {
+ [TYPE_ISL1208] = { "isl1208", 2, false, false },
+ [TYPE_ISL1209] = { "isl1209", 2, true, false },
+ [TYPE_ISL1218] = { "isl1218", 8, false, false },
+ [TYPE_ISL1219] = { "isl1219", 2, true, true },
+};
+
+static const struct i2c_device_id isl1208_id[] = {
+ { "isl1208", TYPE_ISL1208 },
+ { "isl1209", TYPE_ISL1209 },
+ { "isl1218", TYPE_ISL1218 },
+ { "isl1219", TYPE_ISL1219 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, isl1208_id);
+
+static const struct of_device_id isl1208_of_match[] = {
+ { .compatible = "isil,isl1208", .data = &isl1208_configs[TYPE_ISL1208] },
+ { .compatible = "isil,isl1209", .data = &isl1208_configs[TYPE_ISL1209] },
+ { .compatible = "isil,isl1218", .data = &isl1208_configs[TYPE_ISL1218] },
+ { .compatible = "isil,isl1219", .data = &isl1208_configs[TYPE_ISL1219] },
+ { }
+};
+MODULE_DEVICE_TABLE(of, isl1208_of_match);
+
+/* Device state */
+struct isl1208_state {
+ struct nvmem_config nvmem_config;
+ struct rtc_device *rtc;
+ const struct isl1208_config *config;
};
/* block read */
@@ -161,6 +202,7 @@ isl1208_i2c_get_atr(struct i2c_client *client)
return atr;
}
+/* returns adjustment value + 100 */
static int
isl1208_i2c_get_dtr(struct i2c_client *client)
{
@@ -171,7 +213,7 @@ isl1208_i2c_get_dtr(struct i2c_client *client)
/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
- return dtr;
+ return dtr + 100;
}
static int
@@ -248,8 +290,8 @@ isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
(sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
dtr = isl1208_i2c_get_dtr(client);
- if (dtr >= 0 - 1)
- seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+ if (dtr >= 0)
+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
atr = isl1208_i2c_get_atr(client);
if (atr >= 0)
@@ -556,7 +598,7 @@ isl1208_rtc_interrupt(int irq, void *data)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
struct i2c_client *client = data;
- struct rtc_device *rtc = i2c_get_clientdata(client);
+ struct isl1208_state *isl1208 = i2c_get_clientdata(client);
int handled = 0, sr, err;
/*
@@ -579,7 +621,7 @@ isl1208_rtc_interrupt(int irq, void *data)
if (sr & ISL1208_REG_SR_ALM) {
dev_dbg(&client->dev, "alarm!\n");
- rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+ rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
/* Clear the alarm */
sr &= ~ISL1208_REG_SR_ALM;
@@ -596,11 +638,12 @@ isl1208_rtc_interrupt(int irq, void *data)
return err;
}
- if (sr & ISL1208_REG_SR_EVT) {
- sysfs_notify(&rtc->dev.kobj, NULL,
- dev_attr_timestamp0.attr.name);
+ if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
dev_warn(&client->dev, "event detected");
handled = 1;
+ if (isl1208->config->has_timestamp)
+ sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
+ dev_attr_timestamp0.attr.name);
}
return handled ? IRQ_HANDLED : IRQ_NONE;
@@ -637,7 +680,7 @@ isl1208_sysfs_show_dtrim(struct device *dev,
if (dtr < 0)
return dtr;
- return sprintf(buf, "%d ppm\n", dtr);
+ return sprintf(buf, "%d ppm\n", dtr - 100);
}
static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
@@ -700,6 +743,46 @@ static const struct attribute_group isl1219_rtc_sysfs_files = {
.attrs = isl1219_rtc_attrs,
};
+static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
+ size_t count)
+{
+ struct isl1208_state *isl1208 = priv;
+ struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
+ int ret;
+
+ /* nvmem sanitizes offset/count for us, but count==0 is possible */
+ if (!count)
+ return count;
+ ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
+ count);
+ return ret == 0 ? count : ret;
+}
+
+static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
+ size_t count)
+{
+ struct isl1208_state *isl1208 = priv;
+ struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
+ int ret;
+
+ /* nvmem sanitizes off/count for us, but count==0 is possible */
+ if (!count)
+ return count;
+ ret = isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
+ count);
+
+ return ret == 0 ? count : ret;
+}
+
+static const struct nvmem_config isl1208_nvmem_config = {
+ .name = "isl1208_nvram",
+ .word_size = 1,
+ .stride = 1,
+ /* .size from chip specific config */
+ .reg_read = isl1208_nvmem_read,
+ .reg_write = isl1208_nvmem_write,
+};
+
static int isl1208_setup_irq(struct i2c_client *client, int irq)
{
int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
@@ -722,7 +805,7 @@ static int
isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
int rc = 0;
- struct rtc_device *rtc;
+ struct isl1208_state *isl1208;
int evdet_irq = -1;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
@@ -731,13 +814,33 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (isl1208_i2c_validate_client(client) < 0)
return -ENODEV;
- rtc = devm_rtc_allocate_device(&client->dev);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
+ /* Allocate driver state, point i2c client data to it */
+ isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
+ if (!isl1208)
+ return -ENOMEM;
+ i2c_set_clientdata(client, isl1208);
+
+ /* Determine which chip we have */
+ if (client->dev.of_node) {
+ isl1208->config = of_device_get_match_data(&client->dev);
+ if (!isl1208->config)
+ return -ENODEV;
+ } else {
+ if (id->driver_data >= ISL_LAST_ID)
+ return -ENODEV;
+ isl1208->config = &isl1208_configs[id->driver_data];
+ }
+
+ isl1208->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(isl1208->rtc))
+ return PTR_ERR(isl1208->rtc);
- rtc->ops = &isl1208_rtc_ops;
+ isl1208->rtc->ops = &isl1208_rtc_ops;
- i2c_set_clientdata(client, rtc);
+ /* Setup nvmem configuration in driver state struct */
+ isl1208->nvmem_config = isl1208_nvmem_config;
+ isl1208->nvmem_config.size = isl1208->config->nvmem_length;
+ isl1208->nvmem_config.priv = isl1208;
rc = isl1208_i2c_get_sr(client);
if (rc < 0) {
@@ -749,7 +852,7 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
dev_warn(&client->dev, "rtc power failure detected, "
"please set clock.\n");
- if (id->driver_data == TYPE_ISL1219) {
+ if (isl1208->config->has_tamper) {
struct device_node *np = client->dev.of_node;
u32 evienb;
@@ -770,13 +873,15 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
dev_err(&client->dev, "could not enable tamper detection\n");
return rc;
}
- rc = rtc_add_group(rtc, &isl1219_rtc_sysfs_files);
+ evdet_irq = of_irq_get_byname(np, "evdet");
+ }
+ if (isl1208->config->has_timestamp) {
+ rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
if (rc)
return rc;
- evdet_irq = of_irq_get_byname(np, "evdet");
}
- rc = rtc_add_group(rtc, &isl1208_rtc_sysfs_files);
+ rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
if (rc)
return rc;
@@ -790,24 +895,12 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (rc)
return rc;
- return rtc_register_device(rtc);
-}
-
-static const struct i2c_device_id isl1208_id[] = {
- { "isl1208", TYPE_ISL1208 },
- { "isl1218", TYPE_ISL1218 },
- { "isl1219", TYPE_ISL1219 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, isl1208_id);
+ rc = rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
+ if (rc)
+ return rc;
-static const struct of_device_id isl1208_of_match[] = {
- { .compatible = "isil,isl1208" },
- { .compatible = "isil,isl1218" },
- { .compatible = "isil,isl1219" },
- { }
-};
-MODULE_DEVICE_TABLE(of, isl1208_of_match);
+ return rtc_register_device(isl1208->rtc);
+}
static struct i2c_driver isl1208_driver = {
.driver = {
diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c
index 2f1772a358ca..18a6f15e313d 100644
--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -82,7 +82,7 @@ unsigned int mc146818_get_time(struct rtc_time *time)
time->tm_year += real_year - 72;
#endif
- if (century)
+ if (century > 20)
time->tm_year += (century - 19) * 100;
/*
diff --git a/drivers/rtc/rtc-meson.c b/drivers/rtc/rtc-meson.c
new file mode 100644
index 000000000000..e08b981dfc21
--- /dev/null
+++ b/drivers/rtc/rtc-meson.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8,
+ * Meson8b and Meson8m2 SoCs.
+ *
+ * The RTC is split in to two parts, the AHB front end and a simple serial
+ * connection to the actual registers. This driver manages both parts.
+ *
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd
+ * Based on origin by Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/rtc.h>
+
+/* registers accessed from cpu bus */
+#define RTC_ADDR0 0x00
+ #define RTC_ADDR0_LINE_SCLK BIT(0)
+ #define RTC_ADDR0_LINE_SEN BIT(1)
+ #define RTC_ADDR0_LINE_SDI BIT(2)
+ #define RTC_ADDR0_START_SER BIT(17)
+ #define RTC_ADDR0_WAIT_SER BIT(22)
+ #define RTC_ADDR0_DATA GENMASK(31, 24)
+
+#define RTC_ADDR1 0x04
+ #define RTC_ADDR1_SDO BIT(0)
+ #define RTC_ADDR1_S_READY BIT(1)
+
+#define RTC_ADDR2 0x08
+#define RTC_ADDR3 0x0c
+
+#define RTC_REG4 0x10
+ #define RTC_REG4_STATIC_VALUE GENMASK(7, 0)
+
+/* rtc registers accessed via rtc-serial interface */
+#define RTC_COUNTER (0)
+#define RTC_SEC_ADJ (2)
+#define RTC_REGMEM_0 (4)
+#define RTC_REGMEM_1 (5)
+#define RTC_REGMEM_2 (6)
+#define RTC_REGMEM_3 (7)
+
+#define RTC_ADDR_BITS (3) /* number of address bits to send */
+#define RTC_DATA_BITS (32) /* number of data bits to tx/rx */
+
+#define MESON_STATIC_BIAS_CUR (0x5 << 1)
+#define MESON_STATIC_VOLTAGE (0x3 << 11)
+#define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE)
+
+struct meson_rtc {
+ struct rtc_device *rtc; /* rtc device we created */
+ struct device *dev; /* device we bound from */
+ struct reset_control *reset; /* reset source */
+ struct regulator *vdd; /* voltage input */
+ struct regmap *peripheral; /* peripheral registers */
+ struct regmap *serial; /* serial registers */
+};
+
+static const struct regmap_config meson_rtc_peripheral_regmap_config = {
+ .name = "peripheral-registers",
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = RTC_REG4,
+ .fast_io = true,
+};
+
+/* RTC front-end serialiser controls */
+
+static void meson_rtc_sclk_pulse(struct meson_rtc *rtc)
+{
+ udelay(5);
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0);
+ udelay(5);
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK,
+ RTC_ADDR0_LINE_SCLK);
+}
+
+static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit)
+{
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI,
+ bit ? RTC_ADDR0_LINE_SDI : 0);
+ meson_rtc_sclk_pulse(rtc);
+}
+
+static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data,
+ unsigned int nr)
+{
+ u32 bit = 1 << (nr - 1);
+
+ while (bit) {
+ meson_rtc_send_bit(rtc, data & bit);
+ bit >>= 1;
+ }
+}
+
+static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode)
+{
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0);
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
+ meson_rtc_send_bit(rtc, mode);
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
+}
+
+static u32 meson_rtc_get_data(struct meson_rtc *rtc)
+{
+ u32 tmp, val = 0;
+ int bit;
+
+ for (bit = 0; bit < RTC_DATA_BITS; bit++) {
+ meson_rtc_sclk_pulse(rtc);
+ val <<= 1;
+
+ regmap_read(rtc->peripheral, RTC_ADDR1, &tmp);
+ val |= tmp & RTC_ADDR1_SDO;
+ }
+
+ return val;
+}
+
+static int meson_rtc_get_bus(struct meson_rtc *rtc)
+{
+ int ret, retries = 3;
+ u32 val;
+
+ /* prepare bus for transfers, set all lines low */
+ val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK;
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0);
+
+ for (retries = 0; retries < 3; retries++) {
+ /* wait for the bus to be ready */
+ if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val,
+ val & RTC_ADDR1_S_READY, 10,
+ 10000))
+ return 0;
+
+ dev_warn(rtc->dev, "failed to get bus, resetting RTC\n");
+
+ ret = reset_control_reset(rtc->reset);
+ if (ret)
+ return ret;
+ }
+
+ dev_err(rtc->dev, "bus is not ready\n");
+ return -ETIMEDOUT;
+}
+
+static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg,
+ unsigned int *data)
+{
+ struct meson_rtc *rtc = context;
+ int ret;
+
+ ret = meson_rtc_get_bus(rtc);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
+ RTC_ADDR0_LINE_SEN);
+ meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
+ meson_rtc_set_dir(rtc, 0);
+ *data = meson_rtc_get_data(rtc);
+
+ return 0;
+}
+
+static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg,
+ unsigned int data)
+{
+ struct meson_rtc *rtc = context;
+ int ret;
+
+ ret = meson_rtc_get_bus(rtc);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
+ RTC_ADDR0_LINE_SEN);
+ meson_rtc_send_bits(rtc, data, RTC_DATA_BITS);
+ meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
+ meson_rtc_set_dir(rtc, 1);
+
+ return 0;
+}
+
+static const struct regmap_bus meson_rtc_serial_bus = {
+ .reg_read = meson_rtc_serial_bus_reg_read,
+ .reg_write = meson_rtc_serial_bus_reg_write,
+};
+
+static const struct regmap_config meson_rtc_serial_regmap_config = {
+ .name = "serial-registers",
+ .reg_bits = 4,
+ .reg_stride = 1,
+ .val_bits = 32,
+ .max_register = RTC_REGMEM_3,
+ .fast_io = false,
+};
+
+static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data)
+{
+ u32 tmp;
+
+ regmap_write(rtc->peripheral, RTC_REG4,
+ FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8)));
+
+ /* write the static value and start the auto serializer */
+ tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER;
+ regmap_update_bits(rtc->peripheral, RTC_ADDR0,
+ RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp);
+
+ /* wait for the auto serializer to complete */
+ return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp,
+ !(tmp & RTC_ADDR0_WAIT_SER), 10,
+ 10000);
+}
+
+/* RTC interface layer functions */
+
+static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm)
+{
+ struct meson_rtc *rtc = dev_get_drvdata(dev);
+ u32 time;
+ int ret;
+
+ ret = regmap_read(rtc->serial, RTC_COUNTER, &time);
+ if (!ret)
+ rtc_time64_to_tm(time, tm);
+
+ return ret;
+}
+
+static int meson_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ struct meson_rtc *rtc = dev_get_drvdata(dev);
+
+ return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm));
+}
+
+static const struct rtc_class_ops meson_rtc_ops = {
+ .read_time = meson_rtc_gettime,
+ .set_time = meson_rtc_settime,
+};
+
+/* NVMEM interface layer functions */
+
+static int meson_rtc_regmem_read(void *context, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct meson_rtc *rtc = context;
+ unsigned int read_offset, read_size;
+
+ read_offset = RTC_REGMEM_0 + (offset / 4);
+ read_size = bytes / 4;
+
+ return regmap_bulk_read(rtc->serial, read_offset, buf, read_size);
+}
+
+static int meson_rtc_regmem_write(void *context, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct meson_rtc *rtc = context;
+ unsigned int write_offset, write_size;
+
+ write_offset = RTC_REGMEM_0 + (offset / 4);
+ write_size = bytes / 4;
+
+ return regmap_bulk_write(rtc->serial, write_offset, buf, write_size);
+}
+
+static int meson_rtc_probe(struct platform_device *pdev)
+{
+ struct nvmem_config meson_rtc_nvmem_config = {
+ .name = "meson-rtc-regmem",
+ .type = NVMEM_TYPE_BATTERY_BACKED,
+ .word_size = 4,
+ .stride = 4,
+ .size = 4 * 4,
+ .reg_read = meson_rtc_regmem_read,
+ .reg_write = meson_rtc_regmem_write,
+ };
+ struct device *dev = &pdev->dev;
+ struct meson_rtc *rtc;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+ u32 tm;
+
+ rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ rtc->rtc = devm_rtc_allocate_device(dev);
+ if (IS_ERR(rtc->rtc))
+ return PTR_ERR(rtc->rtc);
+
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->dev = dev;
+
+ rtc->rtc->ops = &meson_rtc_ops;
+ rtc->rtc->range_max = U32_MAX;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ rtc->peripheral = devm_regmap_init_mmio(dev, base,
+ &meson_rtc_peripheral_regmap_config);
+ if (IS_ERR(rtc->peripheral)) {
+ dev_err(dev, "failed to create peripheral regmap\n");
+ return PTR_ERR(rtc->peripheral);
+ }
+
+ rtc->reset = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(rtc->reset)) {
+ dev_err(dev, "missing reset line\n");
+ return PTR_ERR(rtc->reset);
+ }
+
+ rtc->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(rtc->vdd)) {
+ dev_err(dev, "failed to get the vdd-supply\n");
+ return PTR_ERR(rtc->vdd);
+ }
+
+ ret = regulator_enable(rtc->vdd);
+ if (ret) {
+ dev_err(dev, "failed to enable vdd-supply\n");
+ return ret;
+ }
+
+ ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT);
+ if (ret) {
+ dev_err(dev, "failed to set static values\n");
+ goto out_disable_vdd;
+ }
+
+ rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc,
+ &meson_rtc_serial_regmap_config);
+ if (IS_ERR(rtc->serial)) {
+ dev_err(dev, "failed to create serial regmap\n");
+ ret = PTR_ERR(rtc->serial);
+ goto out_disable_vdd;
+ }
+
+ /*
+ * check if we can read RTC counter, if not then the RTC is probably
+ * not functional. If it isn't probably best to not bind.
+ */
+ ret = regmap_read(rtc->serial, RTC_COUNTER, &tm);
+ if (ret) {
+ dev_err(dev, "cannot read RTC counter, RTC not functional\n");
+ goto out_disable_vdd;
+ }
+
+ meson_rtc_nvmem_config.priv = rtc;
+ ret = rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config);
+ if (ret)
+ goto out_disable_vdd;
+
+ ret = rtc_register_device(rtc->rtc);
+ if (ret)
+ goto out_disable_vdd;
+
+ return 0;
+
+out_disable_vdd:
+ regulator_disable(rtc->vdd);
+ return ret;
+}
+
+static const struct of_device_id meson_rtc_dt_match[] = {
+ { .compatible = "amlogic,meson6-rtc", },
+ { .compatible = "amlogic,meson8-rtc", },
+ { .compatible = "amlogic,meson8b-rtc", },
+ { .compatible = "amlogic,meson8m2-rtc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, meson_rtc_dt_match);
+
+static struct platform_driver meson_rtc_driver = {
+ .probe = meson_rtc_probe,
+ .driver = {
+ .name = "meson-rtc",
+ .of_match_table = of_match_ptr(meson_rtc_dt_match),
+ },
+};
+module_platform_driver(meson_rtc_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson RTC Driver");
+MODULE_AUTHOR("Ben Dooks <ben.doosk@codethink.co.uk>");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:meson-rtc");
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 283c2335b01b..f6ce63c443a0 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -27,17 +27,11 @@
*/
#define PCF85063_REG_CTRL1 0x00 /* status */
+#define PCF85063_REG_CTRL1_CAP_SEL BIT(0)
#define PCF85063_REG_CTRL1_STOP BIT(5)
-#define PCF85063_REG_CTRL2 0x01
#define PCF85063_REG_SC 0x04 /* datetime */
#define PCF85063_REG_SC_OS 0x80
-#define PCF85063_REG_MN 0x05
-#define PCF85063_REG_HR 0x06
-#define PCF85063_REG_DM 0x07
-#define PCF85063_REG_DW 0x08
-#define PCF85063_REG_MO 0x09
-#define PCF85063_REG_YR 0x0A
static struct i2c_driver pcf85063_driver;
@@ -180,6 +174,39 @@ static const struct rtc_class_ops pcf85063_rtc_ops = {
.set_time = pcf85063_rtc_set_time
};
+static int pcf85063_load_capacitance(struct i2c_client *client)
+{
+ u32 load;
+ int rc;
+ u8 reg;
+
+ rc = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
+ if (rc < 0)
+ return rc;
+
+ reg = rc;
+ load = 7000;
+ of_property_read_u32(client->dev.of_node, "quartz-load-femtofarads",
+ &load);
+
+ switch (load) {
+ default:
+ dev_warn(&client->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 7000",
+ load);
+ /* fall through */
+ case 7000:
+ reg &= ~PCF85063_REG_CTRL1_CAP_SEL;
+ break;
+ case 12500:
+ reg |= PCF85063_REG_CTRL1_CAP_SEL;
+ break;
+ }
+
+ rc = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, reg);
+
+ return rc;
+}
+
static int pcf85063_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -197,6 +224,11 @@ static int pcf85063_probe(struct i2c_client *client,
return err;
}
+ err = pcf85063_load_capacitance(client);
+ if (err < 0)
+ dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
+ err);
+
rtc = devm_rtc_device_register(&client->dev,
pcf85063_driver.driver.name,
&pcf85063_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index 3fcd2cbafc84..b5c61a70b5df 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -97,8 +97,9 @@ static int pcf8523_voltage_low(struct i2c_client *client)
return !!(value & REG_CONTROL3_BLF);
}
-static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
+static int pcf8523_load_capacitance(struct i2c_client *client)
{
+ u32 load;
u8 value;
int err;
@@ -106,14 +107,24 @@ static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
if (err < 0)
return err;
- if (!high)
- value &= ~REG_CONTROL1_CAP_SEL;
- else
+ load = 12500;
+ of_property_read_u32(client->dev.of_node, "quartz-load-femtofarads",
+ &load);
+
+ switch (load) {
+ default:
+ dev_warn(&client->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 12500",
+ load);
+ /* fall through */
+ case 12500:
value |= REG_CONTROL1_CAP_SEL;
+ break;
+ case 7000:
+ value &= ~REG_CONTROL1_CAP_SEL;
+ break;
+ }
err = pcf8523_write(client, REG_CONTROL1, value);
- if (err < 0)
- return err;
return err;
}
@@ -347,9 +358,10 @@ static int pcf8523_probe(struct i2c_client *client,
if (!pcf)
return -ENOMEM;
- err = pcf8523_select_capacitance(client, true);
+ err = pcf8523_load_capacitance(client);
if (err < 0)
- return err;
+ dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
+ err);
err = pcf8523_set_pm(client, 0);
if (err < 0)
@@ -374,6 +386,7 @@ MODULE_DEVICE_TABLE(i2c, pcf8523_id);
#ifdef CONFIG_OF
static const struct of_device_id pcf8523_of_match[] = {
{ .compatible = "nxp,pcf8523" },
+ { .compatible = "microcrystal,rv8523" },
{ }
};
MODULE_DEVICE_TABLE(of, pcf8523_of_match);
diff --git a/drivers/rtc/rtc-pic32.c b/drivers/rtc/rtc-pic32.c
index d7ef0a6f8931..1c4de6e90da0 100644
--- a/drivers/rtc/rtc-pic32.c
+++ b/drivers/rtc/rtc-pic32.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* PIC32 RTC driver
*
* Joshua Henderson <joshua.henderson@microchip.com>
* Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
*/
#include <linux/init.h>
#include <linux/module.h>
@@ -180,22 +172,16 @@ static int pic32_rtc_settime(struct device *dev, struct rtc_time *tm)
{
struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
void __iomem *base = pdata->reg_base;
- int year = tm->tm_year - 100;
dev_dbg(dev, "set time %ptR\n", tm);
- if (year < 0 || year >= 100) {
- dev_err(dev, "rtc only supports 100 years\n");
- return -EINVAL;
- }
-
clk_enable(pdata->clk);
writeb(bin2bcd(tm->tm_sec), base + PIC32_RTCSEC);
writeb(bin2bcd(tm->tm_min), base + PIC32_RTCMIN);
writeb(bin2bcd(tm->tm_hour), base + PIC32_RTCHOUR);
writeb(bin2bcd(tm->tm_mday), base + PIC32_RTCDAY);
writeb(bin2bcd(tm->tm_mon + 1), base + PIC32_RTCMON);
- writeb(bin2bcd(year), base + PIC32_RTCYEAR);
+ writeb(bin2bcd(tm->tm_year - 100), base + PIC32_RTCYEAR);
clk_disable(pdata->clk);
return 0;
@@ -348,13 +334,17 @@ static int pic32_rtc_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
- pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
- &pic32_rtcops,
- THIS_MODULE);
- if (IS_ERR(pdata->rtc)) {
- ret = PTR_ERR(pdata->rtc);
+ pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(pdata->rtc))
+ return PTR_ERR(pdata->rtc);
+
+ pdata->rtc->ops = &pic32_rtcops;
+ pdata->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ pdata->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+ ret = rtc_register_device(pdata->rtc);
+ if (ret)
goto err_nortc;
- }
pdata->rtc->max_user_freq = 128;
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 1074e3dbfc1d..cda020700744 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -213,7 +213,8 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
}
}
- secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+ ((unsigned long)value[3] << 24);
rtc_time_to_tm(secs, tm);
@@ -284,7 +285,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
return rc;
}
- secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+ ((unsigned long)value[3] << 24);
rtc_time_to_tm(secs, &alarm->time);
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index c5038329058c..66a473a3c3fe 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -52,8 +52,10 @@
# define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */
#define RS5C_REG_CTRL2 15
# define RS5C372_CTRL2_24 (1 << 5)
-# define R2025_CTRL2_XST (1 << 5)
-# define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2025S/D */
+# define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2x2x */
+# define R2x2x_CTRL2_VDET (1 << 6) /* only if R2x2x */
+# define R2x2x_CTRL2_XSTP (1 << 5) /* only if R2x2x */
+# define R2x2x_CTRL2_PON (1 << 4) /* only if R2x2x */
# define RS5C_CTRL2_CTFG (1 << 2)
# define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */
# define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */
@@ -212,10 +214,27 @@ static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
int status = rs5c_get_regs(rs5c);
+ unsigned char ctrl2 = rs5c->regs[RS5C_REG_CTRL2];
if (status < 0)
return status;
+ switch (rs5c->type) {
+ case rtc_r2025sd:
+ case rtc_r2221tl:
+ if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) ||
+ (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) {
+ dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ if (ctrl2 & RS5C_CTRL2_XSTP) {
+ dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
+ return -EINVAL;
+ }
+ }
+
tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
@@ -243,6 +262,7 @@ static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf[7];
+ unsigned char ctrl2;
int addr;
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
@@ -261,7 +281,32 @@ static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
buf[6] = bin2bcd(tm->tm_year - 100);
if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) {
- dev_err(&client->dev, "%s: write error\n", __func__);
+ dev_dbg(&client->dev, "%s: write error in line %i\n",
+ __func__, __LINE__);
+ return -EIO;
+ }
+
+ addr = RS5C_ADDR(RS5C_REG_CTRL2);
+ ctrl2 = i2c_smbus_read_byte_data(client, addr);
+
+ /* clear rtc warning bits */
+ switch (rs5c->type) {
+ case rtc_r2025sd:
+ case rtc_r2221tl:
+ ctrl2 &= ~(R2x2x_CTRL2_VDET | R2x2x_CTRL2_PON);
+ if (rs5c->type == rtc_r2025sd)
+ ctrl2 |= R2x2x_CTRL2_XSTP;
+ else
+ ctrl2 &= ~R2x2x_CTRL2_XSTP;
+ break;
+ default:
+ ctrl2 &= ~RS5C_CTRL2_XSTP;
+ break;
+ }
+
+ if (i2c_smbus_write_byte_data(client, addr, ctrl2) < 0) {
+ dev_dbg(&client->dev, "%s: write error in line %i\n",
+ __func__, __LINE__);
return -EIO;
}
@@ -519,20 +564,25 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
unsigned char buf[2];
int addr, i, ret = 0;
- if (rs5c372->type == rtc_r2025sd) {
- if (rs5c372->regs[RS5C_REG_CTRL2] & R2025_CTRL2_XST)
- return ret;
- rs5c372->regs[RS5C_REG_CTRL2] |= R2025_CTRL2_XST;
- } else {
- if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP))
- return ret;
- rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
- }
-
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c372->regs[RS5C_REG_CTRL1];
buf[1] = rs5c372->regs[RS5C_REG_CTRL2];
+ switch (rs5c372->type) {
+ case rtc_r2025sd:
+ if (buf[1] & R2x2x_CTRL2_XSTP)
+ return ret;
+ break;
+ case rtc_r2221tl:
+ if (!(buf[1] & R2x2x_CTRL2_XSTP))
+ return ret;
+ break;
+ default:
+ if (!(buf[1] & RS5C_CTRL2_XSTP))
+ return ret;
+ break;
+ }
+
/* use 24hr mode */
switch (rs5c372->type) {
case rtc_rs5c372a:
diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c
new file mode 100644
index 000000000000..06884ebb7a61
--- /dev/null
+++ b/drivers/rtc/rtc-rv3028.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the Micro Crystal RV3028
+ *
+ * Copyright (C) 2019 Micro Crystal SA
+ *
+ * Alexandre Belloni <alexandre.belloni@bootlin.com>
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RV3028_SEC 0x00
+#define RV3028_MIN 0x01
+#define RV3028_HOUR 0x02
+#define RV3028_WDAY 0x03
+#define RV3028_DAY 0x04
+#define RV3028_MONTH 0x05
+#define RV3028_YEAR 0x06
+#define RV3028_ALARM_MIN 0x07
+#define RV3028_ALARM_HOUR 0x08
+#define RV3028_ALARM_DAY 0x09
+#define RV3028_STATUS 0x0E
+#define RV3028_CTRL1 0x0F
+#define RV3028_CTRL2 0x10
+#define RV3028_EVT_CTRL 0x13
+#define RV3028_TS_COUNT 0x14
+#define RV3028_TS_SEC 0x15
+#define RV3028_RAM1 0x1F
+#define RV3028_EEPROM_ADDR 0x25
+#define RV3028_EEPROM_DATA 0x26
+#define RV3028_EEPROM_CMD 0x27
+#define RV3028_CLKOUT 0x35
+#define RV3028_OFFSET 0x36
+#define RV3028_BACKUP 0x37
+
+#define RV3028_STATUS_PORF BIT(0)
+#define RV3028_STATUS_EVF BIT(1)
+#define RV3028_STATUS_AF BIT(2)
+#define RV3028_STATUS_TF BIT(3)
+#define RV3028_STATUS_UF BIT(4)
+#define RV3028_STATUS_BSF BIT(5)
+#define RV3028_STATUS_CLKF BIT(6)
+#define RV3028_STATUS_EEBUSY BIT(7)
+
+#define RV3028_CTRL1_EERD BIT(3)
+#define RV3028_CTRL1_WADA BIT(5)
+
+#define RV3028_CTRL2_RESET BIT(0)
+#define RV3028_CTRL2_12_24 BIT(1)
+#define RV3028_CTRL2_EIE BIT(2)
+#define RV3028_CTRL2_AIE BIT(3)
+#define RV3028_CTRL2_TIE BIT(4)
+#define RV3028_CTRL2_UIE BIT(5)
+#define RV3028_CTRL2_TSE BIT(7)
+
+#define RV3028_EVT_CTRL_TSR BIT(2)
+
+#define RV3028_EEPROM_CMD_WRITE 0x21
+#define RV3028_EEPROM_CMD_READ 0x22
+
+#define RV3028_EEBUSY_POLL 10000
+#define RV3028_EEBUSY_TIMEOUT 100000
+
+#define RV3028_BACKUP_TCE BIT(5)
+#define RV3028_BACKUP_TCR_MASK GENMASK(1,0)
+
+#define OFFSET_STEP_PPT 953674
+
+enum rv3028_type {
+ rv_3028,
+};
+
+struct rv3028_data {
+ struct regmap *regmap;
+ struct rtc_device *rtc;
+ enum rv3028_type type;
+};
+
+static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
+
+static ssize_t timestamp0_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
+
+ regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR,
+ RV3028_EVT_CTRL_TSR);
+
+ return count;
+};
+
+static ssize_t timestamp0_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
+ struct rtc_time tm;
+ int ret, count;
+ u8 date[6];
+
+ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
+ if (ret)
+ return ret;
+
+ if (!count)
+ return 0;
+
+ ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date,
+ sizeof(date));
+ if (ret)
+ return ret;
+
+ tm.tm_sec = bcd2bin(date[0]);
+ tm.tm_min = bcd2bin(date[1]);
+ tm.tm_hour = bcd2bin(date[2]);
+ tm.tm_mday = bcd2bin(date[3]);
+ tm.tm_mon = bcd2bin(date[4]) - 1;
+ tm.tm_year = bcd2bin(date[5]) + 100;
+
+ ret = rtc_valid_tm(&tm);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)rtc_tm_to_time64(&tm));
+};
+
+static DEVICE_ATTR_RW(timestamp0);
+
+static ssize_t timestamp0_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
+ int ret, count;
+
+ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", count);
+};
+
+static DEVICE_ATTR_RO(timestamp0_count);
+
+static struct attribute *rv3028_attrs[] = {
+ &dev_attr_timestamp0.attr,
+ &dev_attr_timestamp0_count.attr,
+ NULL
+};
+
+static const struct attribute_group rv3028_attr_group = {
+ .attrs = rv3028_attrs,
+};
+
+static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
+{
+ struct rv3028_data *rv3028 = dev_id;
+ unsigned long events = 0;
+ u32 status = 0, ctrl = 0;
+
+ if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 ||
+ status == 0) {
+ return IRQ_NONE;
+ }
+
+ if (status & RV3028_STATUS_PORF)
+ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
+
+ if (status & RV3028_STATUS_TF) {
+ status |= RV3028_STATUS_TF;
+ ctrl |= RV3028_CTRL2_TIE;
+ events |= RTC_PF;
+ }
+
+ if (status & RV3028_STATUS_AF) {
+ status |= RV3028_STATUS_AF;
+ ctrl |= RV3028_CTRL2_AIE;
+ events |= RTC_AF;
+ }
+
+ if (status & RV3028_STATUS_UF) {
+ status |= RV3028_STATUS_UF;
+ ctrl |= RV3028_CTRL2_UIE;
+ events |= RTC_UF;
+ }
+
+ if (events) {
+ rtc_update_irq(rv3028->rtc, 1, events);
+ regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0);
+ regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0);
+ }
+
+ if (status & RV3028_STATUS_EVF) {
+ sysfs_notify(&rv3028->rtc->dev.kobj, NULL,
+ dev_attr_timestamp0.attr.name);
+ dev_warn(&rv3028->rtc->dev, "event detected");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int rv3028_get_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ u8 date[7];
+ int ret, status;
+
+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & RV3028_STATUS_PORF) {
+ dev_warn(dev, "Voltage low, data is invalid.\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date));
+ if (ret)
+ return ret;
+
+ tm->tm_sec = bcd2bin(date[RV3028_SEC] & 0x7f);
+ tm->tm_min = bcd2bin(date[RV3028_MIN] & 0x7f);
+ tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f);
+ tm->tm_wday = ilog2(date[RV3028_WDAY] & 0x7f);
+ tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f);
+ tm->tm_mon = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1;
+ tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100;
+
+ return 0;
+}
+
+static int rv3028_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ u8 date[7];
+ int ret;
+
+ date[RV3028_SEC] = bin2bcd(tm->tm_sec);
+ date[RV3028_MIN] = bin2bcd(tm->tm_min);
+ date[RV3028_HOUR] = bin2bcd(tm->tm_hour);
+ date[RV3028_WDAY] = 1 << (tm->tm_wday);
+ date[RV3028_DAY] = bin2bcd(tm->tm_mday);
+ date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1);
+ date[RV3028_YEAR] = bin2bcd(tm->tm_year - 100);
+
+ /*
+ * Writing to the Seconds register has the same effect as setting RESET
+ * bit to 1
+ */
+ ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date,
+ sizeof(date));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
+ RV3028_STATUS_PORF, 0);
+
+ return ret;
+}
+
+static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ u8 alarmvals[3];
+ int status, ctrl, ret;
+
+ ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
+ sizeof(alarmvals));
+ if (ret)
+ return ret;
+
+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl);
+ if (ret < 0)
+ return ret;
+
+ alrm->time.tm_sec = 0;
+ alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
+ alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
+ alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
+
+ alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE);
+ alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled;
+
+ return 0;
+}
+
+static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ u8 alarmvals[3];
+ u8 ctrl = 0;
+ int ret;
+
+ /* The alarm has no seconds, round up to nearest minute */
+ if (alrm->time.tm_sec) {
+ time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
+
+ alarm_time += 60 - alrm->time.tm_sec;
+ rtc_time64_to_tm(alarm_time, &alrm->time);
+ }
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
+ RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0);
+ if (ret)
+ return ret;
+
+ alarmvals[0] = bin2bcd(alrm->time.tm_min);
+ alarmvals[1] = bin2bcd(alrm->time.tm_hour);
+ alarmvals[2] = bin2bcd(alrm->time.tm_mday);
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
+ RV3028_STATUS_AF, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
+ sizeof(alarmvals));
+ if (ret)
+ return ret;
+
+ if (alrm->enabled) {
+ if (rv3028->rtc->uie_rtctimer.enabled)
+ ctrl |= RV3028_CTRL2_UIE;
+ if (rv3028->rtc->aie_timer.enabled)
+ ctrl |= RV3028_CTRL2_AIE;
+ }
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
+ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
+
+ return ret;
+}
+
+static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ int ctrl = 0, ret;
+
+ if (enabled) {
+ if (rv3028->rtc->uie_rtctimer.enabled)
+ ctrl |= RV3028_CTRL2_UIE;
+ if (rv3028->rtc->aie_timer.enabled)
+ ctrl |= RV3028_CTRL2_AIE;
+ }
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
+ RV3028_STATUS_AF | RV3028_STATUS_UF, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
+ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rv3028_read_offset(struct device *dev, long *offset)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ int ret, value, steps;
+
+ ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value);
+ if (ret < 0)
+ return ret;
+
+ steps = sign_extend32(value << 1, 8);
+
+ ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value);
+ if (ret < 0)
+ return ret;
+
+ steps += value >> 7;
+
+ *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
+
+ return 0;
+}
+
+static int rv3028_set_offset(struct device *dev, long offset)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ int ret;
+
+ offset = clamp(offset, -244141L, 243187L) * 1000;
+ offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
+
+ ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
+ if (ret < 0)
+ return ret;
+
+ return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
+ offset << 7);
+}
+
+static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+ int status, ret = 0;
+
+ switch (cmd) {
+ case RTC_VL_READ:
+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & RV3028_STATUS_PORF)
+ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
+
+ status &= RV3028_STATUS_PORF;
+
+ if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+
+ case RTC_VL_CLR:
+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
+ RV3028_STATUS_PORF, 0);
+
+ return ret;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int rv3028_nvram_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes);
+}
+
+static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes);
+}
+
+static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ u32 status, ctrl1;
+ int i, ret, err;
+ u8 *buf = val;
+
+ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+ if (ret)
+ return ret;
+
+ if (!(ctrl1 & RV3028_CTRL1_EERD)) {
+ ret = regmap_update_bits(priv, RV3028_CTRL1,
+ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+ !(status & RV3028_STATUS_EEBUSY),
+ RV3028_EEBUSY_POLL,
+ RV3028_EEBUSY_TIMEOUT);
+ if (ret)
+ goto restore_eerd;
+ }
+
+ for (i = 0; i < bytes; i++) {
+ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_write(priv, RV3028_EEPROM_CMD,
+ RV3028_EEPROM_CMD_WRITE);
+ if (ret)
+ goto restore_eerd;
+
+ usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
+
+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+ !(status & RV3028_STATUS_EEBUSY),
+ RV3028_EEBUSY_POLL,
+ RV3028_EEBUSY_TIMEOUT);
+ if (ret)
+ goto restore_eerd;
+ }
+
+restore_eerd:
+ if (!(ctrl1 & RV3028_CTRL1_EERD))
+ {
+ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
+ 0);
+ if (err && !ret)
+ ret = err;
+ }
+
+ return ret;
+}
+
+static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ u32 status, ctrl1, data;
+ int i, ret, err;
+ u8 *buf = val;
+
+ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+ if (ret)
+ return ret;
+
+ if (!(ctrl1 & RV3028_CTRL1_EERD)) {
+ ret = regmap_update_bits(priv, RV3028_CTRL1,
+ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+ !(status & RV3028_STATUS_EEBUSY),
+ RV3028_EEBUSY_POLL,
+ RV3028_EEBUSY_TIMEOUT);
+ if (ret)
+ goto restore_eerd;
+ }
+
+ for (i = 0; i < bytes; i++) {
+ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_write(priv, RV3028_EEPROM_CMD,
+ RV3028_EEPROM_CMD_READ);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+ !(status & RV3028_STATUS_EEBUSY),
+ RV3028_EEBUSY_POLL,
+ RV3028_EEBUSY_TIMEOUT);
+ if (ret)
+ goto restore_eerd;
+
+ ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
+ if (ret)
+ goto restore_eerd;
+ buf[i] = data;
+ }
+
+restore_eerd:
+ if (!(ctrl1 & RV3028_CTRL1_EERD))
+ {
+ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
+ 0);
+ if (err && !ret)
+ ret = err;
+ }
+
+ return ret;
+}
+
+static struct rtc_class_ops rv3028_rtc_ops = {
+ .read_time = rv3028_get_time,
+ .set_time = rv3028_set_time,
+ .read_offset = rv3028_read_offset,
+ .set_offset = rv3028_set_offset,
+ .ioctl = rv3028_ioctl,
+};
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x37,
+};
+
+static int rv3028_probe(struct i2c_client *client)
+{
+ struct rv3028_data *rv3028;
+ int ret, status;
+ u32 ohms;
+ struct nvmem_config nvmem_cfg = {
+ .name = "rv3028_nvram",
+ .word_size = 1,
+ .stride = 1,
+ .size = 2,
+ .type = NVMEM_TYPE_BATTERY_BACKED,
+ .reg_read = rv3028_nvram_read,
+ .reg_write = rv3028_nvram_write,
+ };
+ struct nvmem_config eeprom_cfg = {
+ .name = "rv3028_eeprom",
+ .word_size = 1,
+ .stride = 1,
+ .size = 43,
+ .type = NVMEM_TYPE_EEPROM,
+ .reg_read = rv3028_eeprom_read,
+ .reg_write = rv3028_eeprom_write,
+ };
+
+ rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data),
+ GFP_KERNEL);
+ if (!rv3028)
+ return -ENOMEM;
+
+ rv3028->regmap = devm_regmap_init_i2c(client, &regmap_config);
+
+ i2c_set_clientdata(client, rv3028);
+
+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & RV3028_STATUS_PORF)
+ dev_warn(&client->dev, "Voltage low, data loss detected.\n");
+
+ if (status & RV3028_STATUS_AF)
+ dev_warn(&client->dev, "An alarm may have been missed.\n");
+
+ rv3028->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(rv3028->rtc)) {
+ return PTR_ERR(rv3028->rtc);
+ }
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, rv3028_handle_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "rv3028", rv3028);
+ if (ret) {
+ dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
+ client->irq = 0;
+ } else {
+ rv3028_rtc_ops.read_alarm = rv3028_get_alarm;
+ rv3028_rtc_ops.set_alarm = rv3028_set_alarm;
+ rv3028_rtc_ops.alarm_irq_enable = rv3028_alarm_irq_enable;
+ }
+ }
+
+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
+ RV3028_CTRL1_WADA, RV3028_CTRL1_WADA);
+ if (ret)
+ return ret;
+
+ /* setup timestamping */
+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
+ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE,
+ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE);
+ if (ret)
+ return ret;
+
+ /* setup trickle charger */
+ if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms",
+ &ohms)) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++)
+ if (ohms == rv3028_trickle_resistors[i])
+ break;
+
+ if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
+ ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
+ RV3028_BACKUP_TCE |
+ RV3028_BACKUP_TCR_MASK,
+ RV3028_BACKUP_TCE | i);
+ if (ret)
+ return ret;
+ } else {
+ dev_warn(&client->dev, "invalid trickle resistor value\n");
+ }
+ }
+
+ ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group);
+ if (ret)
+ return ret;
+
+ rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099;
+ rv3028->rtc->ops = &rv3028_rtc_ops;
+ ret = rtc_register_device(rv3028->rtc);
+ if (ret)
+ return ret;
+
+ nvmem_cfg.priv = rv3028->regmap;
+ rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
+ eeprom_cfg.priv = rv3028->regmap;
+ rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
+
+ rv3028->rtc->max_user_freq = 1;
+
+ return 0;
+}
+
+static const struct of_device_id rv3028_of_match[] = {
+ { .compatible = "microcrystal,rv3028", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rv3028_of_match);
+
+static struct i2c_driver rv3028_driver = {
+ .driver = {
+ .name = "rtc-rv3028",
+ .of_match_table = of_match_ptr(rv3028_of_match),
+ },
+ .probe_new = rv3028_probe,
+};
+module_i2c_driver(rv3028_driver);
+
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
+MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 450a0b831a2d..0b102c3cf5a4 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* RTC driver for the Micro Crystal RV8803
*
* Copyright (C) 2015 Micro Crystal SA
- *
- * Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Alexandre Belloni <alexandre.belloni@bootlin.com>
*
*/
@@ -236,9 +232,6 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
u8 date[7];
int ctrl, flags, ret;
- if ((tm->tm_year < 100) || (tm->tm_year > 199))
- return -EINVAL;
-
ctrl = rv8803_read_reg(rv8803->client, RV8803_CTRL);
if (ctrl < 0)
return ctrl;
@@ -602,6 +595,8 @@ static int rv8803_probe(struct i2c_client *client,
rv8803->rtc->ops = &rv8803_rtc_ops;
rv8803->rtc->nvram_old_abi = true;
+ rv8803->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ rv8803->rtc->range_max = RTC_TIMESTAMP_END_2099;
err = rtc_register_device(rv8803->rtc);
if (err)
return err;
@@ -648,6 +643,6 @@ static struct i2c_driver rv8803_driver = {
};
module_i2c_driver(rv8803_driver);
-MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
MODULE_DESCRIPTION("Micro Crystal RV8803 RTC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index eac882169744..776e3a2b89e8 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -15,6 +15,8 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/log2.h>
@@ -51,11 +53,19 @@
#define RX8581_CTRL_STOP 0x02 /* STOP bit */
#define RX8581_CTRL_RESET 0x01 /* RESET bit */
+#define RX8571_USER_RAM 0x10
+#define RX8571_NVRAM_SIZE 0x10
+
struct rx8581 {
struct regmap *regmap;
struct rtc_device *rtc;
};
+struct rx85x1_config {
+ struct regmap_config regmap;
+ unsigned int num_nvram;
+};
+
/*
* In the routines that deal directly with the rx8581 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
@@ -181,25 +191,103 @@ static const struct rtc_class_ops rx8581_rtc_ops = {
.set_time = rx8581_rtc_set_time,
};
-static int rx8581_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int rx8571_nvram_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
{
- struct rx8581 *rx8581;
- static const struct regmap_config config = {
+ struct rx8581 *rx8581 = priv;
+
+ return regmap_bulk_read(rx8581->regmap, RX8571_USER_RAM + offset,
+ val, bytes);
+}
+
+static int rx8571_nvram_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct rx8581 *rx8581 = priv;
+
+ return regmap_bulk_write(rx8581->regmap, RX8571_USER_RAM + offset,
+ val, bytes);
+}
+
+static int rx85x1_nvram_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct rx8581 *rx8581 = priv;
+ unsigned int tmp_val;
+ int ret;
+
+ ret = regmap_read(rx8581->regmap, RX8581_REG_RAM, &tmp_val);
+ (*(unsigned char *)val) = (unsigned char) tmp_val;
+
+ return ret;
+}
+
+static int rx85x1_nvram_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct rx8581 *rx8581 = priv;
+ unsigned char tmp_val;
+
+ tmp_val = *((unsigned char *)val);
+ return regmap_write(rx8581->regmap, RX8581_REG_RAM,
+ (unsigned int)tmp_val);
+}
+
+static const struct rx85x1_config rx8581_config = {
+ .regmap = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xf,
+ },
+ .num_nvram = 1
+};
+
+static const struct rx85x1_config rx8571_config = {
+ .regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x1f,
+ },
+ .num_nvram = 2
+};
+
+static int rx8581_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct rx8581 *rx8581;
+ const struct rx85x1_config *config = &rx8581_config;
+ const void *data = of_device_get_match_data(&client->dev);
+ static struct nvmem_config nvmem_cfg[] = {
+ {
+ .name = "rx85x1-",
+ .word_size = 1,
+ .stride = 1,
+ .size = 1,
+ .reg_read = rx85x1_nvram_read,
+ .reg_write = rx85x1_nvram_write,
+ }, {
+ .name = "rx8571-",
+ .word_size = 1,
+ .stride = 1,
+ .size = RX8571_NVRAM_SIZE,
+ .reg_read = rx8571_nvram_read,
+ .reg_write = rx8571_nvram_write,
+ },
};
+ int ret, i;
dev_dbg(&client->dev, "%s\n", __func__);
+ if (data)
+ config = data;
+
rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
if (!rx8581)
return -ENOMEM;
i2c_set_clientdata(client, rx8581);
- rx8581->regmap = devm_regmap_init_i2c(client, &config);
+ rx8581->regmap = devm_regmap_init_i2c(client, &config->regmap);
if (IS_ERR(rx8581->regmap))
return PTR_ERR(rx8581->regmap);
@@ -213,7 +301,14 @@ static int rx8581_probe(struct i2c_client *client,
rx8581->rtc->start_secs = 0;
rx8581->rtc->set_start_time = true;
- return rtc_register_device(rx8581->rtc);
+ ret = rtc_register_device(rx8581->rtc);
+
+ for (i = 0; i < config->num_nvram; i++) {
+ nvmem_cfg[i].priv = rx8581;
+ rtc_nvmem_register(rx8581->rtc, &nvmem_cfg[i]);
+ }
+
+ return ret;
}
static const struct i2c_device_id rx8581_id[] = {
@@ -223,8 +318,9 @@ static const struct i2c_device_id rx8581_id[] = {
MODULE_DEVICE_TABLE(i2c, rx8581_id);
static const struct of_device_id rx8581_of_match[] = {
- { .compatible = "epson,rx8581" },
- { }
+ { .compatible = "epson,rx8571", .data = &rx8571_config },
+ { .compatible = "epson,rx8581", .data = &rx8581_config },
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rx8581_of_match);
@@ -240,5 +336,5 @@ static struct i2c_driver rx8581_driver = {
module_i2c_driver(rx8581_driver);
MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
-MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
+MODULE_DESCRIPTION("Epson RX-8571/RX-8581 RTC driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 04c68178c42d..e81a2b22a5c3 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -26,6 +26,7 @@
#include <linux/log2.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/uaccess.h>
#include <linux/io.h>
@@ -39,7 +40,7 @@ struct s3c_rtc {
void __iomem *base;
struct clk *rtc_clk;
struct clk *rtc_src_clk;
- bool clk_disabled;
+ bool alarm_enabled;
const struct s3c_rtc_data *data;
@@ -47,7 +48,7 @@ struct s3c_rtc {
int irq_tick;
spinlock_t pie_lock;
- spinlock_t alarm_clk_lock;
+ spinlock_t alarm_lock;
int ticnt_save;
int ticnt_en_save;
@@ -70,44 +71,27 @@ struct s3c_rtc_data {
static int s3c_rtc_enable_clk(struct s3c_rtc *info)
{
- unsigned long irq_flags;
- int ret = 0;
+ int ret;
- spin_lock_irqsave(&info->alarm_clk_lock, irq_flags);
+ ret = clk_enable(info->rtc_clk);
+ if (ret)
+ return ret;
- if (info->clk_disabled) {
- ret = clk_enable(info->rtc_clk);
- if (ret)
- goto out;
-
- if (info->data->needs_src_clk) {
- ret = clk_enable(info->rtc_src_clk);
- if (ret) {
- clk_disable(info->rtc_clk);
- goto out;
- }
+ if (info->data->needs_src_clk) {
+ ret = clk_enable(info->rtc_src_clk);
+ if (ret) {
+ clk_disable(info->rtc_clk);
+ return ret;
}
- info->clk_disabled = false;
}
-
-out:
- spin_unlock_irqrestore(&info->alarm_clk_lock, irq_flags);
-
- return ret;
+ return 0;
}
static void s3c_rtc_disable_clk(struct s3c_rtc *info)
{
- unsigned long irq_flags;
-
- spin_lock_irqsave(&info->alarm_clk_lock, irq_flags);
- if (!info->clk_disabled) {
- if (info->data->needs_src_clk)
- clk_disable(info->rtc_src_clk);
- clk_disable(info->rtc_clk);
- info->clk_disabled = true;
- }
- spin_unlock_irqrestore(&info->alarm_clk_lock, irq_flags);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
+ clk_disable(info->rtc_clk);
}
/* IRQ Handlers */
@@ -135,6 +119,7 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
{
struct s3c_rtc *info = dev_get_drvdata(dev);
+ unsigned long flags;
unsigned int tmp;
int ret;
@@ -151,17 +136,19 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
writeb(tmp, info->base + S3C2410_RTCALM);
- s3c_rtc_disable_clk(info);
+ spin_lock_irqsave(&info->alarm_lock, flags);
- if (enabled) {
- ret = s3c_rtc_enable_clk(info);
- if (ret)
- return ret;
- } else {
+ if (info->alarm_enabled && !enabled)
s3c_rtc_disable_clk(info);
- }
+ else if (!info->alarm_enabled && enabled)
+ ret = s3c_rtc_enable_clk(info);
- return 0;
+ info->alarm_enabled = enabled;
+ spin_unlock_irqrestore(&info->alarm_lock, flags);
+
+ s3c_rtc_disable_clk(info);
+
+ return ret;
}
/* Set RTC frequency */
@@ -357,10 +344,10 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
writeb(alrm_en, info->base + S3C2410_RTCALM);
- s3c_rtc_disable_clk(info);
-
s3c_rtc_setaie(dev, alrm->enabled);
+ s3c_rtc_disable_clk(info);
+
return 0;
}
@@ -456,16 +443,6 @@ static int s3c_rtc_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id s3c_rtc_dt_match[];
-
-static const struct s3c_rtc_data *s3c_rtc_get_data(struct platform_device *pdev)
-{
- const struct of_device_id *match;
-
- match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
- return match->data;
-}
-
static int s3c_rtc_probe(struct platform_device *pdev)
{
struct s3c_rtc *info = NULL;
@@ -485,13 +462,13 @@ static int s3c_rtc_probe(struct platform_device *pdev)
}
info->dev = &pdev->dev;
- info->data = s3c_rtc_get_data(pdev);
+ info->data = of_device_get_match_data(&pdev->dev);
if (!info->data) {
dev_err(&pdev->dev, "failed getting s3c_rtc_data\n");
return -EINVAL;
}
spin_lock_init(&info->pie_lock);
- spin_lock_init(&info->alarm_clk_lock);
+ spin_lock_init(&info->alarm_lock);
platform_set_drvdata(pdev, info);
@@ -591,6 +568,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_setfreq(info, 1);
+ s3c_rtc_disable_clk(info);
+
return 0;
err_nortc:
diff --git a/drivers/rtc/rtc-sd3078.c b/drivers/rtc/rtc-sd3078.c
new file mode 100644
index 000000000000..42cb90db7f94
--- /dev/null
+++ b/drivers/rtc/rtc-sd3078.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock (RTC) Driver for sd3078
+ * Copyright (C) 2018 Zoro Li
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define SD3078_REG_SC 0x00
+#define SD3078_REG_MN 0x01
+#define SD3078_REG_HR 0x02
+#define SD3078_REG_DW 0x03
+#define SD3078_REG_DM 0x04
+#define SD3078_REG_MO 0x05
+#define SD3078_REG_YR 0x06
+
+#define SD3078_REG_CTRL1 0x0f
+#define SD3078_REG_CTRL2 0x10
+#define SD3078_REG_CTRL3 0x11
+
+#define KEY_WRITE1 0x80
+#define KEY_WRITE2 0x04
+#define KEY_WRITE3 0x80
+
+#define NUM_TIME_REGS (SD3078_REG_YR - SD3078_REG_SC + 1)
+
+/*
+ * The sd3078 has write protection
+ * and we can choose whether or not to use it.
+ * Write protection is turned off by default.
+ */
+#define WRITE_PROTECT_EN 0
+
+struct sd3078 {
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+};
+
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * when modification of the register,
+ * the "write" bit needs to be written in a certain order.
+ * 1. set WRITE1 bit
+ * 2. set WRITE2 bit
+ * 3. set WRITE3 bit
+ */
+static void sd3078_enable_reg_write(struct sd3078 *sd3078)
+{
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL2,
+ KEY_WRITE1, KEY_WRITE1);
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL1,
+ KEY_WRITE2, KEY_WRITE2);
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL1,
+ KEY_WRITE3, KEY_WRITE3);
+}
+
+#if WRITE_PROTECT_EN
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * we should disable the write function.
+ * when disable write,
+ * the "write" bit needs to be clear in a certain order.
+ * 1. clear WRITE2 bit
+ * 2. clear WRITE3 bit
+ * 3. clear WRITE1 bit
+ */
+static void sd3078_disable_reg_write(struct sd3078 *sd3078)
+{
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL1,
+ KEY_WRITE2, 0);
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL1,
+ KEY_WRITE3, 0);
+ regmap_update_bits(sd3078->regmap, SD3078_REG_CTRL2,
+ KEY_WRITE1, 0);
+}
+#endif
+
+static int sd3078_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned char hour;
+ unsigned char rtc_data[NUM_TIME_REGS] = {0};
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sd3078 *sd3078 = i2c_get_clientdata(client);
+ int ret;
+
+ ret = regmap_bulk_read(sd3078->regmap, SD3078_REG_SC, rtc_data,
+ NUM_TIME_REGS);
+ if (ret < 0) {
+ dev_err(dev, "reading from RTC failed with err:%d\n", ret);
+ return ret;
+ }
+
+ tm->tm_sec = bcd2bin(rtc_data[SD3078_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(rtc_data[SD3078_REG_MN] & 0x7F);
+
+ /*
+ * The sd3078 supports 12/24 hour mode.
+ * When getting time,
+ * we need to convert the 12 hour mode to the 24 hour mode.
+ */
+ hour = rtc_data[SD3078_REG_HR];
+ if (hour & 0x80) /* 24H MODE */
+ tm->tm_hour = bcd2bin(rtc_data[SD3078_REG_HR] & 0x3F);
+ else if (hour & 0x20) /* 12H MODE PM */
+ tm->tm_hour = bcd2bin(rtc_data[SD3078_REG_HR] & 0x1F) + 12;
+ else /* 12H MODE AM */
+ tm->tm_hour = bcd2bin(rtc_data[SD3078_REG_HR] & 0x1F);
+
+ tm->tm_mday = bcd2bin(rtc_data[SD3078_REG_DM] & 0x3F);
+ tm->tm_wday = rtc_data[SD3078_REG_DW] & 0x07;
+ tm->tm_mon = bcd2bin(rtc_data[SD3078_REG_MO] & 0x1F) - 1;
+ tm->tm_year = bcd2bin(rtc_data[SD3078_REG_YR]) + 100;
+
+ return 0;
+}
+
+static int sd3078_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned char rtc_data[NUM_TIME_REGS];
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sd3078 *sd3078 = i2c_get_clientdata(client);
+ int ret;
+
+ rtc_data[SD3078_REG_SC] = bin2bcd(tm->tm_sec);
+ rtc_data[SD3078_REG_MN] = bin2bcd(tm->tm_min);
+ rtc_data[SD3078_REG_HR] = bin2bcd(tm->tm_hour) | 0x80;
+ rtc_data[SD3078_REG_DM] = bin2bcd(tm->tm_mday);
+ rtc_data[SD3078_REG_DW] = tm->tm_wday & 0x07;
+ rtc_data[SD3078_REG_MO] = bin2bcd(tm->tm_mon) + 1;
+ rtc_data[SD3078_REG_YR] = bin2bcd(tm->tm_year - 100);
+
+#if WRITE_PROTECT_EN
+ sd3078_enable_reg_write(sd3078);
+#endif
+
+ ret = regmap_bulk_write(sd3078->regmap, SD3078_REG_SC, rtc_data,
+ NUM_TIME_REGS);
+ if (ret < 0) {
+ dev_err(dev, "writing to RTC failed with err:%d\n", ret);
+ return ret;
+ }
+
+#if WRITE_PROTECT_EN
+ sd3078_disable_reg_write(sd3078);
+#endif
+
+ return 0;
+}
+
+static const struct rtc_class_ops sd3078_rtc_ops = {
+ .read_time = sd3078_rtc_read_time,
+ .set_time = sd3078_rtc_set_time,
+};
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x11,
+};
+
+static int sd3078_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct sd3078 *sd3078;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ sd3078 = devm_kzalloc(&client->dev, sizeof(*sd3078), GFP_KERNEL);
+ if (!sd3078)
+ return -ENOMEM;
+
+ sd3078->regmap = devm_regmap_init_i2c(client, &regmap_config);
+ if (IS_ERR(sd3078->regmap)) {
+ dev_err(&client->dev, "regmap allocation failed\n");
+ return PTR_ERR(sd3078->regmap);
+ }
+
+ i2c_set_clientdata(client, sd3078);
+
+ sd3078->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(sd3078->rtc))
+ return PTR_ERR(sd3078->rtc);
+
+ sd3078->rtc->ops = &sd3078_rtc_ops;
+ sd3078->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ sd3078->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+ ret = rtc_register_device(sd3078->rtc);
+ if (ret) {
+ dev_err(&client->dev, "failed to register rtc device\n");
+ return ret;
+ }
+
+ sd3078_enable_reg_write(sd3078);
+
+ return 0;
+}
+
+static const struct i2c_device_id sd3078_id[] = {
+ {"sd3078", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sd3078_id);
+
+static const struct of_device_id rtc_dt_match[] = {
+ { .compatible = "whwave,sd3078" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rtc_dt_match);
+
+static struct i2c_driver sd3078_driver = {
+ .driver = {
+ .name = "sd3078",
+ .of_match_table = of_match_ptr(rtc_dt_match),
+ },
+ .probe = sd3078_probe,
+ .id_table = sd3078_id,
+};
+
+module_i2c_driver(sd3078_driver);
+
+MODULE_AUTHOR("Dianlong Li <long17.cool@163.com>");
+MODULE_DESCRIPTION("SD3078 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index b2483a749ac4..0b9eff19149b 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -239,6 +239,9 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
u32 lpsr;
u32 events = 0;
+ if (data->clk)
+ clk_enable(data->clk);
+
regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
if (lpsr & SNVS_LPSR_LPTA) {
@@ -253,6 +256,9 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
/* clear interrupt status */
regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);
+ if (data->clk)
+ clk_disable(data->clk);
+
return events ? IRQ_HANDLED : IRQ_NONE;
}
diff --git a/drivers/rtc/rtc-tx4939.c b/drivers/rtc/rtc-tx4939.c
index 61c110b2045f..2d24babc4057 100644
--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* TX4939 internal RTC driver
* Based on RBTX49xx patch from CELF patch archive.
*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
* (C) Copyright TOSHIBA CORPORATION 2005-2007
*/
#include <linux/rtc.h>
@@ -65,10 +62,11 @@ static int tx4939_rtc_cmd(struct tx4939_rtc_reg __iomem *rtcreg, int cmd)
return 0;
}
-static int tx4939_rtc_set_mmss(struct device *dev, unsigned long secs)
+static int tx4939_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+ unsigned long secs = rtc_tm_to_time64(tm);
int i, ret;
unsigned char buf[6];
@@ -111,7 +109,7 @@ static int tx4939_rtc_read_time(struct device *dev, struct rtc_time *tm)
spin_unlock_irq(&pdata->lock);
sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
(buf[3] << 8) | buf[2];
- rtc_time_to_tm(sec, tm);
+ rtc_time64_to_tm(sec, tm);
return 0;
}
@@ -123,14 +121,7 @@ static int tx4939_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned long sec;
unsigned char buf[6];
- if (alrm->time.tm_sec < 0 ||
- alrm->time.tm_min < 0 ||
- alrm->time.tm_hour < 0 ||
- alrm->time.tm_mday < 0 ||
- alrm->time.tm_mon < 0 ||
- alrm->time.tm_year < 0)
- return -EINVAL;
- rtc_tm_to_time(&alrm->time, &sec);
+ sec = rtc_tm_to_time64(&alrm->time);
buf[0] = 0;
buf[1] = 0;
buf[2] = sec;
@@ -173,7 +164,7 @@ static int tx4939_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
spin_unlock_irq(&pdata->lock);
sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
(buf[3] << 8) | buf[2];
- rtc_time_to_tm(sec, &alrm->time);
+ rtc_time64_to_tm(sec, &alrm->time);
return rtc_valid_tm(&alrm->time);
}
@@ -210,7 +201,7 @@ static const struct rtc_class_ops tx4939_rtc_ops = {
.read_time = tx4939_rtc_read_time,
.read_alarm = tx4939_rtc_read_alarm,
.set_alarm = tx4939_rtc_set_alarm,
- .set_mmss = tx4939_rtc_set_mmss,
+ .set_time = tx4939_rtc_set_time,
.alarm_irq_enable = tx4939_rtc_alarm_irq_enable,
};
@@ -283,6 +274,7 @@ static int __init tx4939_rtc_probe(struct platform_device *pdev)
rtc->ops = &tx4939_rtc_ops;
rtc->nvram_old_abi = true;
+ rtc->range_max = U32_MAX;
pdata->rtc = rtc;
@@ -315,5 +307,5 @@ module_platform_driver_probe(tx4939_rtc_driver, tx4939_rtc_probe);
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("TX4939 internal RTC driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:tx4939rtc");
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index c532bd13fbe5..bb950945ec7f 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -49,7 +49,6 @@
#define RTC_CALIB_DEF 0x198233
#define RTC_CALIB_MASK 0x1FFFFF
-#define RTC_SEC_MAX_VAL 0xFFFFFFFF
struct xlnx_rtc_dev {
struct rtc_device *rtc;
@@ -71,9 +70,6 @@ static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
*/
new_time = rtc_tm_to_time64(tm) + 1;
- if (new_time > RTC_SEC_MAX_VAL)
- return -EINVAL;
-
/*
* Writing into calibration register will clear the Tick Counter and
* force the next second to be signaled exactly in 1 second period
@@ -154,9 +150,6 @@ static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
alarm_time = rtc_tm_to_time64(&alrm->time);
- if (alarm_time > RTC_SEC_MAX_VAL)
- return -EINVAL;
-
writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
@@ -222,6 +215,13 @@ static int xlnx_rtc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, xrtcdev);
+ xrtcdev->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(xrtcdev->rtc))
+ return PTR_ERR(xrtcdev->rtc);
+
+ xrtcdev->rtc->ops = &xlnx_rtc_ops;
+ xrtcdev->rtc->range_max = U32_MAX;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
@@ -263,9 +263,7 @@ static int xlnx_rtc_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
- xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
- &xlnx_rtc_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(xrtcdev->rtc);
+ return rtc_register_device(xrtcdev->rtc);
}
static int xlnx_rtc_remove(struct platform_device *pdev)