diff options
Diffstat (limited to 'drivers')
555 files changed, 31266 insertions, 3058 deletions
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index abda3786a5d7..181bc2f7bb74 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -139,13 +139,23 @@ static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data) { struct platform_device *ghes_dev; struct ghes_arr *ghes_arr = data; - int rc; + int rc, i; if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR) return 0; if (!((struct acpi_hest_generic *)hest_hdr)->enabled) return 0; + for (i = 0; i < ghes_arr->count; i++) { + struct acpi_hest_header *hdr; + ghes_dev = ghes_arr->ghes_devs[i]; + hdr = *(struct acpi_hest_header **)ghes_dev->dev.platform_data; + if (hdr->source_id == hest_hdr->source_id) { + pr_warning(FW_WARN HEST_PFX "Duplicated hardware error source ID: %d.\n", + hdr->source_id); + return -EIO; + } + } ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id); if (!ghes_dev) return -ENOMEM; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 52ca9649d769..372f9b70f7f4 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1333,23 +1333,6 @@ int acpi_resources_are_enforced(void) EXPORT_SYMBOL(acpi_resources_are_enforced); /* - * Create and initialize a spinlock. - */ -acpi_status -acpi_os_create_lock(acpi_spinlock *out_handle) -{ - spinlock_t *lock; - - lock = ACPI_ALLOCATE(sizeof(spinlock_t)); - if (!lock) - return AE_NO_MEMORY; - spin_lock_init(lock); - *out_handle = lock; - - return AE_OK; -} - -/* * Deallocate the memory for a spinlock. */ void acpi_os_delete_lock(acpi_spinlock handle) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index d38c40fe4ddb..41223c7f0206 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -452,7 +452,7 @@ void ahci_save_initial_config(struct device *dev, } if (mask_port_map) { - dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n", + dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n", port_map, port_map & mask_port_map); port_map &= mask_port_map; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 736bee5dafeb..000d03ae6653 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { * Devices which choke on SETXFER. Applies only if both the * device and controller are SATA. */ - { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index dfb6e9d3d759..7f099d6e4e0b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2802,10 +2802,11 @@ int ata_eh_reset(struct ata_link *link, int classify, } /* - * Some controllers can't be frozen very well and may set - * spuruious error conditions during reset. Clear accumulated - * error information. As reset is the final recovery action, - * nothing is lost by doing this. + * Some controllers can't be frozen very well and may set spurious + * error conditions during reset. Clear accumulated error + * information and re-thaw the port if frozen. As reset is the + * final recovery action and we cross check link onlineness against + * device classification later, no hotplug event is lost by this. */ spin_lock_irqsave(link->ap->lock, flags); memset(&link->eh_info, 0, sizeof(link->eh_info)); @@ -2814,6 +2815,9 @@ int ata_eh_reset(struct ata_link *link, int classify, ap->pflags &= ~ATA_PFLAG_EH_PENDING; spin_unlock_irqrestore(link->ap->lock, flags); + if (ap->pflags & ATA_PFLAG_FROZEN) + ata_eh_thaw_port(ap); + /* * Make sure onlineness and classification result correspond. * Hotplug could have happened during reset and some diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d51f9795c064..927f968e99d9 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc); */ int ata_sas_port_start(struct ata_port *ap) { + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_start); diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 75a6a0c0094f..5d7f58a7e34d 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6121), }, { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, + { PCI_DEVICE(0x1B4B, 0x91A0), }, + { PCI_DEVICE(0x1B4B, 0x91A4), }, + { } /* terminate list */ }; diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 1c4b3aa4c7c4..dc88a39e7db8 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf) /* * Function: get_burst_length_encode * arguments: datalength: length in bytes of data - * returns value to be programmed in register corrresponding to data length + * returns value to be programmed in register corresponding to data length * This value is effectively the log(base 2) of the length */ static int get_burst_length_encode(int datalength) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 9f9b2359f718..45d7c8fc73bd 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -30,7 +30,6 @@ static DEFINE_MUTEX(mem_sysfs_mutex); #define MEMORY_CLASS_NAME "memory" -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) static int sections_per_block; diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 1c291af637b3..6040717b62bb 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -367,7 +367,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister); * * Returns &struct platform_device pointer on success, or ERR_PTR() on error. */ -struct platform_device *__init_or_module platform_device_register_resndata( +struct platform_device *platform_device_register_resndata( struct device *parent, const char *name, int id, const struct resource *res, unsigned int num, diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index c0dd09df7be8..ad367c4139b1 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -291,7 +291,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, { struct pm_clk_notifier_block *clknb; struct device *dev = data; - char *con_id; + char **con_id; int error; dev_dbg(dev, "%s() %ld\n", __func__, action); @@ -309,8 +309,8 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, dev->pwr_domain = clknb->pwr_domain; if (clknb->con_ids[0]) { - for (con_id = clknb->con_ids[0]; *con_id; con_id++) - pm_runtime_clk_add(dev, con_id); + for (con_id = clknb->con_ids; *con_id; con_id++) + pm_runtime_clk_add(dev, *con_id); } else { pm_runtime_clk_add(dev, NULL); } @@ -380,25 +380,25 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, { struct pm_clk_notifier_block *clknb; struct device *dev = data; - char *con_id; + char **con_id; dev_dbg(dev, "%s() %ld\n", __func__, action); clknb = container_of(nb, struct pm_clk_notifier_block, nb); switch (action) { - case BUS_NOTIFY_ADD_DEVICE: + case BUS_NOTIFY_BIND_DRIVER: if (clknb->con_ids[0]) { - for (con_id = clknb->con_ids[0]; *con_id; con_id++) - enable_clock(dev, con_id); + for (con_id = clknb->con_ids; *con_id; con_id++) + enable_clock(dev, *con_id); } else { enable_clock(dev, NULL); } break; - case BUS_NOTIFY_DEL_DEVICE: + case BUS_NOTIFY_UNBOUND_DRIVER: if (clknb->con_ids[0]) { - for (con_id = clknb->con_ids[0]; *con_id; con_id++) - disable_clock(dev, con_id); + for (con_id = clknb->con_ids; *con_id; con_id++) + disable_clock(dev, *con_id); } else { disable_clock(dev, NULL); } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index aa6320207745..06f09bf89cb2 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -57,7 +57,8 @@ static int async_error; */ void device_pm_init(struct device *dev) { - dev->power.in_suspend = false; + dev->power.is_prepared = false; + dev->power.is_suspended = false; init_completion(&dev->power.completion); complete_all(&dev->power.completion); dev->power.wakeup = NULL; @@ -91,7 +92,7 @@ void device_pm_add(struct device *dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev_name(dev)); mutex_lock(&dpm_list_mtx); - if (dev->parent && dev->parent->power.in_suspend) + if (dev->parent && dev->parent->power.is_prepared) dev_warn(dev, "parent %s should not be sleeping\n", dev_name(dev->parent)); list_add_tail(&dev->power.entry, &dpm_list); @@ -511,7 +512,14 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) dpm_wait(dev->parent, async); device_lock(dev); - dev->power.in_suspend = false; + /* + * This is a fib. But we'll allow new children to be added below + * a resumed device, even if the device hasn't been completed yet. + */ + dev->power.is_prepared = false; + + if (!dev->power.is_suspended) + goto Unlock; if (dev->pwr_domain) { pm_dev_dbg(dev, state, "power domain "); @@ -548,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = false; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -670,7 +681,7 @@ void dpm_complete(pm_message_t state) struct device *dev = to_device(dpm_prepared_list.prev); get_device(dev); - dev->power.in_suspend = false; + dev->power.is_prepared = false; list_move(&dev->power.entry, &list); mutex_unlock(&dpm_list_mtx); @@ -835,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) device_lock(dev); if (async_error) - goto End; + goto Unlock; if (pm_wakeup_pending()) { async_error = -EBUSY; - goto End; + goto Unlock; } if (dev->pwr_domain) { @@ -877,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = !error; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -1042,7 +1056,7 @@ int dpm_prepare(pm_message_t state) put_device(dev); break; } - dev->power.in_suspend = true; + dev->power.is_prepared = true; if (!list_empty(&dev->power.entry)) list_move_tail(&dev->power.entry, &dpm_prepared_list); put_device(dev); diff --git a/drivers/base/syscore.c b/drivers/base/syscore.c index c126db3cb7d1..e8d11b6630ee 100644 --- a/drivers/base/syscore.c +++ b/drivers/base/syscore.c @@ -9,6 +9,7 @@ #include <linux/syscore_ops.h> #include <linux/mutex.h> #include <linux/module.h> +#include <linux/interrupt.h> static LIST_HEAD(syscore_ops_list); static DEFINE_MUTEX(syscore_ops_lock); @@ -48,6 +49,13 @@ int syscore_suspend(void) struct syscore_ops *ops; int ret = 0; + pr_debug("Checking wakeup interrupts\n"); + + /* Return error code if there are any wakeup interrupts pending. */ + ret = check_wakeup_irqs(); + if (ret) + return ret; + WARN_ONCE(!irqs_disabled(), "Interrupts enabled before system core suspend.\n"); diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index 09ef9a878ef0..cf0e63dd97da 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -79,7 +79,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev, md_io.error = 0; if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags)) - rw |= REQ_FUA; + rw |= REQ_FUA | REQ_FLUSH; rw |= REQ_SYNC; bio = bio_alloc(GFP_NOIO, 1); diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index f440a02dfdb1..7b976296b564 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -112,9 +112,6 @@ struct drbd_bitmap { struct task_struct *bm_task; }; -static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km); - #define bm_print_lock_info(m) __bm_print_lock_info(m, __func__) static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func) { @@ -994,6 +991,9 @@ static void bm_page_io_async(struct bm_aio_ctx *ctx, int page_nr, int rw) __must bio_endio(bio, -EIO); } else { submit_bio(rw, bio); + /* this should not count as user activity and cause the + * resync to throttle -- see drbd_rs_should_slow_down(). */ + atomic_add(len >> 9, &mdev->rs_sect_ev); } } @@ -1256,7 +1256,7 @@ unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_f * expected to be called for only a few bits (e - s about BITS_PER_LONG). * Must hold bitmap lock already. */ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km) + unsigned long e, int val) { struct drbd_bitmap *b = mdev->bitmap; unsigned long *p_addr = NULL; @@ -1274,14 +1274,14 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, unsigned int page_nr = bm_bit_to_page_idx(b, bitnr); if (page_nr != last_page_nr) { if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) bm_set_page_need_writeout(b->bm_pages[last_page_nr]); changed_total += c; c = 0; - p_addr = __bm_map_pidx(b, page_nr, km); + p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1); last_page_nr = page_nr; } if (val) @@ -1290,7 +1290,7 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr)); } if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) @@ -1318,7 +1318,7 @@ static int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags) bm_print_lock_info(mdev); - c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1); + c = __bm_change_bits_to(mdev, s, e, val); spin_unlock_irqrestore(&b->bm_lock, flags); return c; @@ -1343,16 +1343,17 @@ static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b, { int i; int bits; - unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0); + unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1); for (i = first_word; i < last_word; i++) { bits = hweight_long(paddr[i]); paddr[i] = ~0UL; b->bm_set += BITS_PER_LONG - bits; } - kunmap_atomic(paddr, KM_USER0); + kunmap_atomic(paddr, KM_IRQ1); } -/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave. +/* Same thing as drbd_bm_set_bits, + * but more efficient for a large bit range. * You must first drbd_bm_lock(). * Can be called to set the whole bitmap in one go. * Sets bits from s to e _inclusive_. */ @@ -1366,6 +1367,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * Do not use memset, because we must account for changes, * so we need to loop over the words with hweight() anyways. */ + struct drbd_bitmap *b = mdev->bitmap; unsigned long sl = ALIGN(s,BITS_PER_LONG); unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1); int first_page; @@ -1376,15 +1378,19 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi if (e - s <= 3*BITS_PER_LONG) { /* don't bother; el and sl may even be wrong. */ - __bm_change_bits_to(mdev, s, e, 1, KM_USER0); + spin_lock_irq(&b->bm_lock); + __bm_change_bits_to(mdev, s, e, 1); + spin_unlock_irq(&b->bm_lock); return; } /* difference is large enough that we can trust sl and el */ + spin_lock_irq(&b->bm_lock); + /* bits filling the current long */ if (sl) - __bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0); + __bm_change_bits_to(mdev, s, sl-1, 1); first_page = sl >> (3 + PAGE_SHIFT); last_page = el >> (3 + PAGE_SHIFT); @@ -1397,8 +1403,10 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi /* first and full pages, unless first page == last page */ for (page_nr = first_page; page_nr < last_page; page_nr++) { bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word); + spin_unlock_irq(&b->bm_lock); cond_resched(); first_word = 0; + spin_lock_irq(&b->bm_lock); } /* last page (respectively only page, for first page == last page) */ @@ -1411,7 +1419,8 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * it would trigger an assert in __bm_change_bits_to() */ if (el <= e) - __bm_change_bits_to(mdev, el, e, 1, KM_USER0); + __bm_change_bits_to(mdev, el, e, 1); + spin_unlock_irq(&b->bm_lock); } /* returns bit state diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 25d32c5aa50a..43beaca53179 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -4602,6 +4602,11 @@ int drbd_asender(struct drbd_thread *thi) dev_err(DEV, "meta connection shut down by peer.\n"); goto reconnect; } else if (rv == -EAGAIN) { + /* If the data socket received something meanwhile, + * that is good enough: peer is still alive. */ + if (time_after(mdev->last_received, + jiffies - mdev->meta.socket->sk->sk_rcvtimeo)) + continue; if (ping_timeout_active) { dev_err(DEV, "PingAck did not arrive in time.\n"); goto reconnect; @@ -4637,6 +4642,7 @@ int drbd_asender(struct drbd_thread *thi) goto reconnect; } if (received == expect) { + mdev->last_received = jiffies; D_ASSERT(cmd != NULL); if (!cmd->process(mdev, h)) goto reconnect; diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 4d76b06b6b20..4d3e6f6213ba 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -536,12 +536,7 @@ static int w_make_resync_request(struct drbd_conf *mdev, return 1; } - /* starting with drbd 8.3.8, we can handle multi-bio EEs, - * if it should be necessary */ - max_bio_size = - mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 : - mdev->agreed_pro_version < 95 ? DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE; - + max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9; number = drbd_rs_number_requests(mdev); if (number == 0) goto requeue; diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index e6fc716aca45..f533f3375e24 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -192,7 +192,8 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, if (lo->xmit_timeout) del_timer_sync(&ti); } else - result = kernel_recvmsg(sock, &msg, &iov, 1, size, 0); + result = kernel_recvmsg(sock, &msg, &iov, 1, size, + msg.msg_flags); if (signal_pending(current)) { siginfo_t info; @@ -753,9 +754,26 @@ static int __init nbd_init(void) return -ENOMEM; part_shift = 0; - if (max_part > 0) + if (max_part > 0) { part_shift = fls(max_part); + /* + * Adjust max_part according to part_shift as it is exported + * to user space so that user can know the max number of + * partition kernel should be able to manage. + * + * Note that -1 is required because partition 0 is reserved + * for the whole disk. + */ + max_part = (1UL << part_shift) - 1; + } + + if ((1UL << part_shift) > DISK_MAX_PARTS) + return -EINVAL; + + if (nbds_max > 1UL << (MINORBITS - part_shift)) + return -EINVAL; + for (i = 0; i < nbds_max; i++) { struct gendisk *disk = alloc_disk(1 << part_shift); if (!disk) diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index a0aabd904a51..46b8136c31bb 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -321,7 +321,6 @@ static void pcd_init_units(void) strcpy(disk->disk_name, cd->name); /* umm... */ disk->fops = &pcd_bdops; disk->flags = GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; - disk->events = DISK_EVENT_MEDIA_CHANGE; } } diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 6ecf89cdf006..079c08808d8a 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -6,10 +6,13 @@ #include <linux/virtio.h> #include <linux/virtio_blk.h> #include <linux/scatterlist.h> +#include <linux/string_helpers.h> +#include <scsi/scsi_cmnd.h> #define PART_BITS 4 static int major, index; +struct workqueue_struct *virtblk_wq; struct virtio_blk { @@ -26,6 +29,9 @@ struct virtio_blk mempool_t *pool; + /* Process context for config space updates */ + struct work_struct config_work; + /* What host tells us, plus 2 for header & tailer. */ unsigned int sg_elems; @@ -141,7 +147,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, num = blk_rq_map_sg(q, vbr->req, vblk->sg + out); if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC) { - sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96); + sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, SCSI_SENSE_BUFFERSIZE); sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr, sizeof(vbr->in_hdr)); } @@ -291,6 +297,46 @@ static ssize_t virtblk_serial_show(struct device *dev, } DEVICE_ATTR(serial, S_IRUGO, virtblk_serial_show, NULL); +static void virtblk_config_changed_work(struct work_struct *work) +{ + struct virtio_blk *vblk = + container_of(work, struct virtio_blk, config_work); + struct virtio_device *vdev = vblk->vdev; + struct request_queue *q = vblk->disk->queue; + char cap_str_2[10], cap_str_10[10]; + u64 capacity, size; + + /* Host must always specify the capacity. */ + vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), + &capacity, sizeof(capacity)); + + /* If capacity is too big, truncate with warning. */ + if ((sector_t)capacity != capacity) { + dev_warn(&vdev->dev, "Capacity %llu too large: truncating\n", + (unsigned long long)capacity); + capacity = (sector_t)-1; + } + + size = capacity * queue_logical_block_size(q); + string_get_size(size, STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); + string_get_size(size, STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); + + dev_notice(&vdev->dev, + "new size: %llu %d-byte logical blocks (%s/%s)\n", + (unsigned long long)capacity, + queue_logical_block_size(q), + cap_str_10, cap_str_2); + + set_capacity(vblk->disk, capacity); +} + +static void virtblk_config_changed(struct virtio_device *vdev) +{ + struct virtio_blk *vblk = vdev->priv; + + queue_work(virtblk_wq, &vblk->config_work); +} + static int __devinit virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; @@ -327,6 +373,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) vblk->vdev = vdev; vblk->sg_elems = sg_elems; sg_init_table(vblk->sg, vblk->sg_elems); + INIT_WORK(&vblk->config_work, virtblk_config_changed_work); /* We expect one virtqueue, for output. */ vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests"); @@ -477,6 +524,8 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv; + flush_work(&vblk->config_work); + /* Nothing should be pending. */ BUG_ON(!list_empty(&vblk->reqs)); @@ -508,27 +557,47 @@ static unsigned int features[] = { * Use __refdata to avoid this warning. */ static struct virtio_driver __refdata virtio_blk = { - .feature_table = features, - .feature_table_size = ARRAY_SIZE(features), - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = virtblk_probe, - .remove = __devexit_p(virtblk_remove), + .feature_table = features, + .feature_table_size = ARRAY_SIZE(features), + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtblk_probe, + .remove = __devexit_p(virtblk_remove), + .config_changed = virtblk_config_changed, }; static int __init init(void) { + int error; + + virtblk_wq = alloc_workqueue("virtio-blk", 0, 0); + if (!virtblk_wq) + return -ENOMEM; + major = register_blkdev(0, "virtblk"); - if (major < 0) - return major; - return register_virtio_driver(&virtio_blk); + if (major < 0) { + error = major; + goto out_destroy_workqueue; + } + + error = register_virtio_driver(&virtio_blk); + if (error) + goto out_unregister_blkdev; + return 0; + +out_unregister_blkdev: + unregister_blkdev(major, "virtblk"); +out_destroy_workqueue: + destroy_workqueue(virtblk_wq); + return error; } static void __exit fini(void) { unregister_blkdev(major, "virtblk"); unregister_virtio_driver(&virtio_blk); + destroy_workqueue(virtblk_wq); } module_init(init); module_exit(fini); diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index c73910cc28c9..5cf2993a8338 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -809,11 +809,13 @@ static int __init xen_blkif_init(void) failed_init: kfree(blkbk->pending_reqs); kfree(blkbk->pending_grant_handles); - for (i = 0; i < mmap_pages; i++) { - if (blkbk->pending_pages[i]) - __free_page(blkbk->pending_pages[i]); + if (blkbk->pending_pages) { + for (i = 0; i < mmap_pages; i++) { + if (blkbk->pending_pages[i]) + __free_page(blkbk->pending_pages[i]); + } + kfree(blkbk->pending_pages); } - kfree(blkbk->pending_pages); kfree(blkbk); blkbk = NULL; return rc; diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 34570823355b..6cc0db1bf522 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -357,14 +357,13 @@ static int xen_vbd_create(struct xen_blkif *blkif, blkif_vdev_t handle, } vbd->bdev = bdev; - vbd->size = vbd_sz(vbd); - if (vbd->bdev->bd_disk == NULL) { DPRINTK("xen_vbd_create: device %08x doesn't exist.\n", vbd->pdevice); xen_vbd_free(vbd); return -ENOENT; } + vbd->size = vbd_sz(vbd); if (vbd->bdev->bd_disk->flags & GENHD_FL_CD || cdrom) vbd->type |= VDISK_CDROM; diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index fd6305bf953e..8ecf4c6c2874 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -64,6 +64,8 @@ static ssize_t btmrvl_hscfgcmd_write(struct file *file, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscfgcmd = result; @@ -108,6 +110,8 @@ static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.psmode = result; @@ -147,6 +151,8 @@ static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.pscmd = result; @@ -191,6 +197,8 @@ static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 16, &result); + if (ret) + return ret; priv->btmrvl_dev.gpio_gap = result; @@ -230,6 +238,8 @@ static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscmd = result; if (priv->btmrvl_dev.hscmd) { @@ -272,6 +282,8 @@ static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hsmode = result; diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index b3f01996318f..48ad2a7ab080 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -355,29 +355,24 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty) * flags pointer to flags for data * count count of received data in bytes * - * Return Value: Number of bytes received + * Return Value: None */ -static unsigned int hci_uart_tty_receive(struct tty_struct *tty, - const u8 *data, char *flags, int count) +static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count) { struct hci_uart *hu = (void *)tty->disc_data; - int received; if (!hu || tty != hu->tty) - return -ENODEV; + return; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) - return -EINVAL; + return; spin_lock(&hu->rx_lock); - received = hu->proto->recv(hu, (void *) data, count); - if (received > 0) - hu->hdev->stat.byte_rx += received; + hu->proto->recv(hu, (void *) data, count); + hu->hdev->stat.byte_rx += count; spin_unlock(&hu->rx_lock); tty_unthrottle(tty); - - return received; } static int hci_uart_register_dev(struct hci_uart *hu) diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index ae15a4ddaa9b..7878da89d29e 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -627,7 +627,6 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) gendisk->fops = &viocd_fops; gendisk->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; - gendisk->events = DISK_EVENT_MEDIA_CHANGE; set_capacity(gendisk, 0); gendisk->private_data = d; d->viocd_disk = gendisk; diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 999803ce10dc..5da67f165afa 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -90,9 +90,10 @@ #define G4x_GMCH_SIZE_MASK (0xf << 8) #define G4x_GMCH_SIZE_1M (0x1 << 8) #define G4x_GMCH_SIZE_2M (0x3 << 8) -#define G4x_GMCH_SIZE_VT_1M (0x9 << 8) -#define G4x_GMCH_SIZE_VT_1_5M (0xa << 8) -#define G4x_GMCH_SIZE_VT_2M (0xc << 8) +#define G4x_GMCH_SIZE_VT_EN (0x8 << 8) +#define G4x_GMCH_SIZE_VT_1M (G4x_GMCH_SIZE_1M | G4x_GMCH_SIZE_VT_EN) +#define G4x_GMCH_SIZE_VT_1_5M ((0x2 << 8) | G4x_GMCH_SIZE_VT_EN) +#define G4x_GMCH_SIZE_VT_2M (G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN) #define GFX_FLSH_CNTL 0x2170 /* 915+ */ diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 051474c65b78..34d6a1cab8de 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -163,11 +163,32 @@ static irqreturn_t hpet_interrupt(int irq, void *data) * This has the effect of treating non-periodic like periodic. */ if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) { - unsigned long m, t; + unsigned long m, t, mc, base, k; + struct hpet __iomem *hpet = devp->hd_hpet; + struct hpets *hpetp = devp->hd_hpets; t = devp->hd_ireqfreq; m = read_counter(&devp->hd_timer->hpet_compare); - write_counter(t + m, &devp->hd_timer->hpet_compare); + mc = read_counter(&hpet->hpet_mc); + /* The time for the next interrupt would logically be t + m, + * however, if we are very unlucky and the interrupt is delayed + * for longer than t then we will completely miss the next + * interrupt if we set t + m and an application will hang. + * Therefore we need to make a more complex computation assuming + * that there exists a k for which the following is true: + * k * t + base < mc + delta + * (k + 1) * t + base > mc + delta + * where t is the interval in hpet ticks for the given freq, + * base is the theoretical start value 0 < base < t, + * mc is the main counter value at the time of the interrupt, + * delta is the time it takes to write the a value to the + * comparator. + * k may then be computed as (mc - base + delta) / t . + */ + base = mc % t; + k = (mc - base + hpetp->hp_delta) / t; + write_counter(t * (k + 1) + base, + &devp->hd_timer->hpet_compare); } if (devp->hd_flags & HPET_SHARED_IRQ) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 838568a7dbf5..fb68b1295373 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1677,17 +1677,12 @@ static int __devinit virtcons_probe(struct virtio_device *vdev) portdev->config.max_nr_ports = 1; if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { multiport = true; - vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - vdev->config->get(vdev, offsetof(struct virtio_console_config, max_nr_ports), &portdev->config.max_nr_ports, sizeof(portdev->config.max_nr_ports)); } - /* Let the Host know we support multiple ports.*/ - vdev->config->finalize_features(vdev); - err = init_vqs(portdev); if (err < 0) { dev_err(&vdev->dev, "Error %d initializing vqs\n", err); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 036e5865eb40..dc7c033ef587 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -24,7 +24,6 @@ #include <linux/ioport.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/pm_runtime.h> #include <linux/irq.h> #include <linux/err.h> #include <linux/clocksource.h> @@ -153,12 +152,10 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -190,9 +187,8 @@ static void sh_cmt_disable(struct sh_cmt_priv *p) /* disable interrupts in CMT block */ sh_cmt_write(p, CMCSR, 0); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } /* private flags */ @@ -664,7 +660,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -679,9 +674,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 17296288a205..808135768617 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/pm_runtime.h> #include <linux/irq.h> #include <linux/err.h> #include <linux/clocksource.h> @@ -110,12 +109,10 @@ static int sh_tmu_enable(struct sh_tmu_priv *p) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -144,9 +141,8 @@ static void sh_tmu_disable(struct sh_tmu_priv *p) /* disable interrupts in TMU block */ sh_tmu_write(p, TCR, 0x0000); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, @@ -415,7 +411,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -430,9 +425,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 219d88a0eeae..dde6a0fad408 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -139,6 +139,7 @@ static int cn_call_callback(struct sk_buff *skb) spin_unlock_bh(&dev->cbdev->queue_lock); if (cbq != NULL) { + err = 0; cbq->callback(msg, nsp); kfree_skb(skb); cn_queue_release_callback(cbq); diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 4e04e1274388..596d5dd32f41 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -759,7 +759,7 @@ static void __exit acpi_cpufreq_exit(void) cpufreq_unregister_driver(&acpi_cpufreq_driver); - free_percpu(acpi_perf_data); + free_acpi_perf_data(); } module_param(acpi_pstate_strict, uint, 0644); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index b60a4c263686..faf7c5217848 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb, old_index = stat->last_index; new_index = freq_table_get_index(stat, freq->new); - cpufreq_stats_update(freq->cpu); - if (old_index == new_index) + /* We can't do stat->time_in_state[-1]= .. */ + if (old_index == -1 || new_index == -1) return 0; - if (old_index == -1 || new_index == -1) + cpufreq_stats_update(freq->cpu); + + if (old_index == new_index) return 0; spin_lock(&cpufreq_stats_lock); @@ -387,6 +389,7 @@ static void __exit cpufreq_stats_exit(void) unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier); for_each_online_cpu(cpu) { cpufreq_stats_free_table(cpu); + cpufreq_stats_free_sysfs(cpu); } } diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 83479b6fb9a1..bce576d7478e 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1079,6 +1079,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, } res = transition_fid_vid(data, fid, vid); + if (res) + return res; + freqs.new = find_khz_freq_from_fid(data->currfid); for_each_cpu(i, data->available_cores) { @@ -1101,7 +1104,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, /* get MSR index for hardware pstate transition */ pstate = index & HW_PSTATE_MASK; if (pstate > data->max_hw_pstate) - return 0; + return -EINVAL; + freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index d0e65d6ddc77..676d957c22b0 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -238,9 +238,9 @@ static int build_sh_desc_ipsec(struct caam_ctx *ctx) /* build shared descriptor for this session */ sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN + - keys_fit_inline ? - ctx->split_key_pad_len + ctx->enckeylen : - CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL); + (keys_fit_inline ? + ctx->split_key_pad_len + ctx->enckeylen : + CAAM_PTR_SZ * 2), GFP_DMA | GFP_KERNEL); if (!sh_desc) { dev_err(jrdev, "could not allocate shared descriptor\n"); return -ENOMEM; diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 636e40925b16..028330044201 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -343,7 +343,7 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) dmae_set_dmars(sh_chan, cfg->mid_rid); dmae_set_chcr(sh_chan, cfg->chcr); - } else if ((sh_dmae_readl(sh_chan, CHCR) & 0xf00) != 0x400) { + } else { dmae_init(sh_chan); } @@ -1144,6 +1144,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev) /* platform data */ shdev->pdata = pdata; + platform_set_drvdata(pdev, shdev); + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -1219,6 +1221,11 @@ static int __init sh_dmae_probe(struct platform_device *pdev) } else { do { for (i = chanirq_res->start; i <= chanirq_res->end; i++) { + if (irq_cnt >= SH_DMAC_MAX_CHANNELS) { + irq_cap = 1; + break; + } + if ((errirq_res->flags & IORESOURCE_BITS) == IORESOURCE_IRQ_SHAREABLE) chan_flag[irq_cnt] = IRQF_SHARED; @@ -1228,15 +1235,11 @@ static int __init sh_dmae_probe(struct platform_device *pdev) "Found IRQ %d for channel %d\n", i, irq_cnt); chan_irq[irq_cnt++] = i; - - if (irq_cnt >= SH_DMAC_MAX_CHANNELS) - break; } - if (irq_cnt >= SH_DMAC_MAX_CHANNELS) { - irq_cap = 1; + if (irq_cnt >= SH_DMAC_MAX_CHANNELS) break; - } + chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, ++irqres); } while (irq_cnt < pdata->channel_num && chanirq_res); @@ -1256,7 +1259,6 @@ static int __init sh_dmae_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - platform_set_drvdata(pdev, shdev); dma_async_device_register(&shdev->common); return err; @@ -1278,6 +1280,8 @@ rst_err: if (dmars) iounmap(shdev->dmars); + + platform_set_drvdata(pdev, NULL); emapdmars: iounmap(shdev->chan_reg); synchronize_rcu(); @@ -1316,6 +1320,8 @@ static int __exit sh_dmae_remove(struct platform_device *pdev) iounmap(shdev->dmars); iounmap(shdev->chan_reg); + platform_set_drvdata(pdev, NULL); + synchronize_rcu(); kfree(shdev); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 438e6c831170..ebb897329c1e 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -264,6 +264,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME; #define PCI_DEVICE_ID_AGERE_FW643 0x5901 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 +#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd #define QUIRK_CYCLE_TIMER 1 #define QUIRK_RESET_PACKET 2 @@ -3190,6 +3191,11 @@ static int __devinit pci_probe(struct pci_dev *dev, int i, err; size_t size; + if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) { + dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n"); + return -ENOSYS; + } + ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { err = -ENOMEM; diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig index 87096b6ca5c9..2f21b0bfe653 100644 --- a/drivers/firmware/google/Kconfig +++ b/drivers/firmware/google/Kconfig @@ -13,6 +13,7 @@ menu "Google Firmware Drivers" config GOOGLE_SMI tristate "SMI interface for Google platforms" depends on ACPI && DMI + select EFI select EFI_VARS help Say Y here if you want to enable SMI callbacks for Google diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index f032e446fc11..bfe723266fd8 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -108,7 +108,9 @@ done: */ unsigned long __init find_ibft_region(unsigned long *sizep) { +#ifdef CONFIG_ACPI int i; +#endif ibft_addr = NULL; #ifdef CONFIG_ACPI diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4a7f63143455..2967002a9f82 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -87,32 +87,20 @@ config GPIO_IT8761E Say yes here to support GPIO functionality of IT8761E super I/O chip. config GPIO_EXYNOS4 - bool "Samsung Exynos4 GPIO library support" - default y if CPU_EXYNOS4210 - depends on ARM - help - Say yes here to support Samsung Exynos4 series SoCs GPIO library + def_bool y + depends on CPU_EXYNOS4210 config GPIO_PLAT_SAMSUNG - bool "Samsung SoCs GPIO library support" - default y if SAMSUNG_GPIOLIB_4BIT - depends on ARM - help - Say yes here to support Samsung SoCs GPIO library + def_bool y + depends on SAMSUNG_GPIOLIB_4BIT config GPIO_S5PC100 - bool "Samsung S5PC100 GPIO library support" - default y if CPU_S5PC100 - depends on ARM - help - Say yes here to support Samsung S5PC100 SoCs GPIO library + def_bool y + depends on CPU_S5PC100 config GPIO_S5PV210 - bool "Samsung S5PV210/S5PC110 GPIO library support" - default y if CPU_S5PV210 - depends on ARM - help - Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library + def_bool y + depends on CPU_S5PV210 config GPIO_PL061 bool "PrimeCell PL061 GPIO support" diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c index d54ca6adb660..9029835112e7 100644 --- a/drivers/gpio/gpio-exynos4.c +++ b/drivers/gpio/gpio-exynos4.c @@ -21,16 +21,37 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + if (pull == S3C_GPIO_PULL_UP) + pull = 3; + + return s3c_gpio_setpull_updown(chip, off, pull); +} + +s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, + unsigned int off) +{ + s3c_gpio_pull_t pull; + + pull = s3c_gpio_getpull_updown(chip, off); + if (pull == 3) + pull = S3C_GPIO_PULL_UP; + + return pull; +} + static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, + .set_pull = s3c_gpio_setpull_exynos4, + .get_pull = s3c_gpio_getpull_exynos4, }; static struct s3c_gpio_cfg gpio_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, + .set_pull = s3c_gpio_setpull_exynos4, + .get_pull = s3c_gpio_getpull_exynos4, }; /* diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 4961ef9bc153..2c212c732d76 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -4,6 +4,7 @@ * Copyright (C) 2008,2009 STMicroelectronics * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -49,6 +50,7 @@ struct nmk_gpio_chip { u32 (*get_secondary_status)(unsigned int bank); void (*set_ioforce)(bool enable); spinlock_t lock; + bool sleepmode; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; @@ -393,14 +395,25 @@ EXPORT_SYMBOL(nmk_config_pins_sleep); * @gpio: pin number * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, * - * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is - * changed to an input (with pullup/down enabled) in sleep and deep sleep. If - * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was - * configured even when in sleep and deep sleep. + * This register is actually in the pinmux layer, not the GPIO block itself. + * The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP + * mode is entered (i.e. when signal IOFORCE is HIGH by the platform code). + * Each GPIO can be configured to be forced into GPIO mode when IOFORCE is + * HIGH, overriding the normal setting defined by GPIO_AFSELx registers. + * When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit), + * the GPIOs return to the normal setting defined by GPIO_AFSELx registers. * - * On DB8500v2 onwards, this setting loses the previous meaning and instead - * indicates if wakeup detection is enabled on the pin. Note that - * enable_irq_wake() will automatically enable wakeup detection. + * If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO + * mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is + * entered) regardless of the altfunction selected. Also wake-up detection is + * ENABLED. + * + * If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains + * controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS + * (for altfunction GPIO) or respective on-chip peripherals (for other + * altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED. + * + * Note that enable_irq_wake() will automatically enable wakeup detection. */ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) { @@ -551,6 +564,12 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, int gpio, bool on) { + if (nmk_chip->sleepmode) { + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); } @@ -901,7 +920,7 @@ void nmk_gpio_wakeups_suspend(void) writel(chip->fwimsc & chip->real_wake, chip->addr + NMK_GPIO_FWIMSC); - if (cpu_is_u8500v2()) { + if (chip->sleepmode) { chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); /* 0 -> wakeup enable */ @@ -923,7 +942,7 @@ void nmk_gpio_wakeups_resume(void) writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); - if (cpu_is_u8500v2()) + if (chip->sleepmode) writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); } } @@ -1010,6 +1029,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) nmk_chip->secondary_parent_irq = secondary_irq; nmk_chip->get_secondary_status = pdata->get_secondary_status; nmk_chip->set_ioforce = pdata->set_ioforce; + nmk_chip->sleepmode = pdata->supports_sleepmode; spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; @@ -1065,5 +1085,3 @@ core_initcall(nmk_gpio_init); MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); MODULE_DESCRIPTION("Nomadik GPIO Driver"); MODULE_LICENSE("GPL"); - - diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 6c51191da567..35bebde23e83 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -432,7 +432,6 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; - u32 val; if (cpu_is_omap44xx()) { MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, @@ -455,15 +454,8 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } + MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge @@ -477,8 +469,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + OMAP24XX_GPIO_CLEARWKUENA); } } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* This part needs to be executed always for OMAP{34xx, 44xx} */ + if (cpu_is_omap34xx() || cpu_is_omap44xx() || + (bank->non_wakeup_gpios & gpio_bit)) { /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes @@ -1134,8 +1127,11 @@ static void gpio_irq_shutdown(struct irq_data *d) { unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); _reset_gpio(bank, gpio); + spin_unlock_irqrestore(&bank->lock, flags); } static void gpio_ack_irq(struct irq_data *d) @@ -1150,9 +1146,12 @@ static void gpio_mask_irq(struct irq_data *d) { unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); _set_gpio_irqenable(bank, gpio, 0); _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); + spin_unlock_irqrestore(&bank->lock, flags); } static void gpio_unmask_irq(struct irq_data *d) @@ -1161,7 +1160,9 @@ static void gpio_unmask_irq(struct irq_data *d) struct gpio_bank *bank = irq_data_get_irq_chip_data(d); unsigned int irq_mask = 1 << get_gpio_index(gpio); u32 trigger = irqd_get_trigger_type(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); if (trigger) _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); @@ -1173,6 +1174,7 @@ static void gpio_unmask_irq(struct irq_data *d) } _set_gpio_irqenable(bank, gpio, 1); + spin_unlock_irqrestore(&bank->lock, flags); } static struct irq_chip gpio_irq_chip = { @@ -1524,7 +1526,7 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) } } -static void __init omap_gpio_chip_init(struct gpio_bank *bank) +static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) { int j; static int gpio; diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index bd6571e0097a..644ba1255d3c 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -223,7 +223,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr = gpio_reg(&lnw->chip, base, GEDR); pending = readl(gedr); while (pending) { - gpio = __ffs(pending) - 1; + gpio = __ffs(pending); mask = BIT(gpio); pending &= ~mask; /* Clear before handling so we can't lose an edge */ diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c index 8d1ddfdd63eb..15097ca616d6 100644 --- a/drivers/gpio/tps65910-gpio.c +++ b/drivers/gpio/tps65910-gpio.c @@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: tps65910->gpio.ngpio = 6; + break; case TPS65911: tps65910->gpio.ngpio = 9; + break; default: return; } diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c index 309644cf4d9b..2bcfb0be09ff 100644 --- a/drivers/gpio/wm831x-gpio.c +++ b/drivers/gpio/wm831x-gpio.c @@ -180,6 +180,7 @@ static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) break; case WM831X_GPIO_PULL_UP: pull = "pullup"; + break; default: pull = "INVALID PULL"; break; diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 3e257a50bf56..61e1ef90d4e5 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -46,10 +46,11 @@ static struct drm_map_list *drm_find_matching_map(struct drm_device *dev, list_for_each_entry(entry, &dev->maplist, head) { /* * Because the kernel-userspace ABI is fixed at a 32-bit offset - * while PCI resources may live above that, we ignore the map - * offset for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS. - * It is assumed that each driver will have only one resource of - * each type. + * while PCI resources may live above that, we only compare the + * lower 32 bits of the map offset for maps of type + * _DRM_FRAMEBUFFER or _DRM_REGISTERS. + * It is assumed that if a driver have more than one resource + * of each type, the lower 32 bits are different. */ if (!entry->map || map->type != entry->map->type || @@ -59,9 +60,12 @@ static struct drm_map_list *drm_find_matching_map(struct drm_device *dev, case _DRM_SHM: if (map->flags != _DRM_CONTAINS_LOCK) break; + return entry; case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: - return entry; + if ((entry->map->offset & 0xffffffff) == + (map->offset & 0xffffffff)) + return entry; default: /* Make gcc happy */ ; } @@ -183,9 +187,6 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, return -EINVAL; } #endif -#ifdef __alpha__ - map->offset += dev->hose->mem_space->start; -#endif /* Some drivers preinitialize some maps, without the X Server * needing to be aware of it. Therefore, we just return success * when the server tries to create a duplicate map. diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 872747c5a544..82db18506662 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -886,9 +886,6 @@ int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group) total_objects += dev->mode_config.num_connector; total_objects += dev->mode_config.num_encoder; - if (total_objects == 0) - return -EINVAL; - group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL); if (!group->id_list) return -ENOMEM; @@ -1113,7 +1110,7 @@ int drm_mode_getresources(struct drm_device *dev, void *data, if (card_res->count_fbs >= fb_count) { copied = 0; fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr; - list_for_each_entry(fb, &file_priv->fbs, head) { + list_for_each_entry(fb, &file_priv->fbs, filp_head) { if (put_user(fb->base.id, fb_id + copied)) { ret = -EFAULT; goto out; diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 0a9357c66ff8..09292193dafe 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -184,9 +184,9 @@ drm_edid_block_valid(u8 *raw_edid) bad: if (raw_edid) { - DRM_ERROR("Raw EDID:\n"); + printk(KERN_ERR "Raw EDID:\n"); print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH); - printk("\n"); + printk(KERN_ERR "\n"); } return 0; } @@ -258,6 +258,17 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, return ret == 2 ? 0 : -1; } +static bool drm_edid_is_zero(u8 *in_edid, int length) +{ + int i; + u32 *raw_edid = (u32 *)in_edid; + + for (i = 0; i < length / 4; i++) + if (*(raw_edid + i) != 0) + return false; + return true; +} + static u8 * drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) { @@ -273,6 +284,10 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) goto out; if (drm_edid_block_valid(block)) break; + if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) { + connector->null_edid_counter++; + goto carp; + } } if (i == 4) goto carp; diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 74e4ff578017..4012fe423460 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/mman.h> #include <linux/pagemap.h> +#include <linux/shmem_fs.h> #include "drmP.h" /** @file drm_gem.c diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index d61d185cf040..4a058c7af6c0 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -28,6 +28,7 @@ * IN THE SOFTWARE. */ #include <linux/compat.h> +#include <linux/ratelimit.h> #include "drmP.h" #include "drm_core.h" @@ -253,10 +254,10 @@ static int compat_drm_addmap(struct file *file, unsigned int cmd, return -EFAULT; m32.handle = (unsigned long)handle; - if (m32.handle != (unsigned long)handle && printk_ratelimit()) - printk(KERN_ERR "compat_drm_addmap truncated handle" - " %p for type %d offset %x\n", - handle, m32.type, m32.offset); + if (m32.handle != (unsigned long)handle) + printk_ratelimited(KERN_ERR "compat_drm_addmap truncated handle" + " %p for type %d offset %x\n", + handle, m32.type, m32.offset); if (copy_to_user(argp, &m32, sizeof(m32))) return -EFAULT; diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c index e1aee4f6a7c6..b6a19cb07caf 100644 --- a/drivers/gpu/drm/drm_pci.c +++ b/drivers/gpu/drm/drm_pci.c @@ -251,7 +251,7 @@ err: } -int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p) +static int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p) { if ((p->busnum >> 8) != drm_get_pci_domain(dev) || (p->busnum & 0xff) != dev->pdev->bus->number || @@ -292,6 +292,7 @@ static struct drm_bus drm_pci_bus = { .get_name = drm_pci_get_name, .set_busid = drm_pci_set_busid, .set_unique = drm_pci_set_unique, + .irq_by_busid = drm_pci_irq_by_busid, .agp_init = drm_pci_agp_init, }; diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c index 2c3fcbdfd8ff..5db96d45fc71 100644 --- a/drivers/gpu/drm/drm_vm.c +++ b/drivers/gpu/drm/drm_vm.c @@ -526,7 +526,7 @@ static int drm_mmap_dma(struct file *filp, struct vm_area_struct *vma) static resource_size_t drm_core_get_reg_ofs(struct drm_device *dev) { #ifdef __alpha__ - return dev->hose->dense_mem_base - dev->hose->mem_space->start; + return dev->hose->dense_mem_base; #else return 0; #endif diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 51c2257b11e6..0a893f7400fa 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -776,7 +776,7 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, " INSTPM: 0x%08x\n", error->instpm); seq_printf(m, " seqno: 0x%08x\n", error->seqno); - for (i = 0; i < 16; i++) + for (i = 0; i < dev_priv->num_fence_regs; i++) seq_printf(m, " fence[%d] = %08llx\n", i, error->fence[i]); if (error->active_bo) @@ -1207,13 +1207,17 @@ static int i915_context_status(struct seq_file *m, void *unused) if (ret) return ret; - seq_printf(m, "power context "); - describe_obj(m, dev_priv->pwrctx); - seq_printf(m, "\n"); + if (dev_priv->pwrctx) { + seq_printf(m, "power context "); + describe_obj(m, dev_priv->pwrctx); + seq_printf(m, "\n"); + } - seq_printf(m, "render context "); - describe_obj(m, dev_priv->renderctx); - seq_printf(m, "\n"); + if (dev_priv->renderctx) { + seq_printf(m, "render context "); + describe_obj(m, dev_priv->renderctx); + seq_printf(m, "\n"); + } mutex_unlock(&dev->mode_config.mutex); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0239e9974bf2..296fbd66f0e1 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1266,30 +1266,6 @@ static int i915_load_modeset_init(struct drm_device *dev) intel_modeset_gem_init(dev); - if (IS_IVYBRIDGE(dev)) { - /* Share pre & uninstall handlers with ILK/SNB */ - dev->driver->irq_handler = ivybridge_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ivybridge_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ivybridge_enable_vblank; - dev->driver->disable_vblank = ivybridge_disable_vblank; - } else if (HAS_PCH_SPLIT(dev)) { - dev->driver->irq_handler = ironlake_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ironlake_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ironlake_enable_vblank; - dev->driver->disable_vblank = ironlake_disable_vblank; - } else { - dev->driver->irq_preinstall = i915_driver_irq_preinstall; - dev->driver->irq_postinstall = i915_driver_irq_postinstall; - dev->driver->irq_uninstall = i915_driver_irq_uninstall; - dev->driver->irq_handler = i915_driver_irq_handler; - dev->driver->enable_vblank = i915_enable_vblank; - dev->driver->disable_vblank = i915_disable_vblank; - } - ret = drm_irq_install(dev); if (ret) goto cleanup_gem; @@ -1967,7 +1943,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!dev_priv->mm.gtt) { DRM_ERROR("Failed to initialize GTT\n"); ret = -ENODEV; - goto out_iomapfree; + goto out_rmmap; } agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; @@ -2011,18 +1987,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (dev_priv->wq == NULL) { DRM_ERROR("Failed to create our workqueue.\n"); ret = -ENOMEM; - goto out_iomapfree; + goto out_mtrrfree; } /* enable GEM by default */ dev_priv->has_gem = 1; - dev->driver->get_vblank_counter = i915_get_vblank_counter; - dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { - dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ - dev->driver->get_vblank_counter = gm45_get_vblank_counter; - } + intel_irq_init(dev); /* Try to make sure MCHBAR is enabled before poking at it */ intel_setup_mchbar(dev); @@ -2103,13 +2074,21 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) return 0; out_gem_unload: + if (dev_priv->mm.inactive_shrinker.shrink) + unregister_shrinker(&dev_priv->mm.inactive_shrinker); + if (dev->pdev->msi_enabled) pci_disable_msi(dev->pdev); intel_teardown_gmbus(dev); intel_teardown_mchbar(dev); destroy_workqueue(dev_priv->wq); -out_iomapfree: +out_mtrrfree: + if (dev_priv->mm.gtt_mtrr >= 0) { + mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, + dev->agp->agp_info.aper_size * 1024 * 1024); + dev_priv->mm.gtt_mtrr = -1; + } io_mapping_free(dev_priv->mm.gtt_mapping); out_rmmap: pci_iounmap(dev->pdev, dev_priv->regs); @@ -2182,9 +2161,8 @@ int i915_driver_unload(struct drm_device *dev) /* Flush any outstanding unpin_work. */ flush_workqueue(dev_priv->wq); - i915_gem_free_all_phys_object(dev); - mutex_lock(&dev->struct_mutex); + i915_gem_free_all_phys_object(dev); i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); if (I915_HAS_FBC(dev) && i915_powersave) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 0defd4270594..eb91e2dd7914 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -52,7 +52,7 @@ module_param_named(powersave, i915_powersave, int, 0600); unsigned int i915_semaphores = 0; module_param_named(semaphores, i915_semaphores, int, 0600); -unsigned int i915_enable_rc6 = 1; +unsigned int i915_enable_rc6 = 0; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); unsigned int i915_enable_fbc = 0; @@ -577,8 +577,12 @@ int i915_reset(struct drm_device *dev, u8 flags) if (get_seconds() - dev_priv->last_gpu_reset < 5) { DRM_ERROR("GPU hanging too fast, declaring wedged!\n"); } else switch (INTEL_INFO(dev)->gen) { + case 7: case 6: ret = gen6_do_reset(dev, flags); + /* If reset with a user forcewake, try to restore */ + if (atomic_read(&dev_priv->forcewake_count)) + __gen6_gt_force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); @@ -762,14 +766,6 @@ static struct drm_driver driver = { .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .get_vblank_timestamp = i915_get_vblank_timestamp, - .get_scanout_position = i915_get_crtc_scanoutpos, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, .reclaim_buffers = drm_core_reclaim_buffers, .master_create = i915_master_create, .master_destroy = i915_master_destroy, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ee660355ae68..f245c588ae95 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -211,6 +211,9 @@ struct drm_i915_display_funcs { void (*fdi_link_train)(struct drm_crtc *crtc); void (*init_clock_gating)(struct drm_device *dev); void (*init_pch_clock_gating)(struct drm_device *dev); + int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj); /* clock updates for mode set */ /* cursor updates */ /* render clock increase/decrease */ @@ -716,6 +719,7 @@ typedef struct drm_i915_private { struct intel_fbdev *fbdev; struct drm_property *broadcast_rgb_property; + struct drm_property *force_audio_property; atomic_t forcewake_count; } drm_i915_private_t; @@ -909,13 +913,6 @@ struct drm_i915_file_private { } mm; }; -enum intel_chip_family { - CHIP_I8XX = 0x01, - CHIP_I9XX = 0x02, - CHIP_I915 = 0x04, - CHIP_I965 = 0x08, -}; - #define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info) #define IS_I830(dev) ((dev)->pci_device == 0x3577) @@ -1000,8 +997,6 @@ extern unsigned int i915_enable_fbc; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); -extern void i915_save_display(struct drm_device *dev); -extern void i915_restore_display(struct drm_device *dev); extern int i915_master_create(struct drm_device *dev, struct drm_master *master); extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master); @@ -1036,33 +1031,12 @@ extern int i915_irq_emit(struct drm_device *dev, void *data, extern int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); -extern void i915_driver_irq_preinstall(struct drm_device * dev); -extern int i915_driver_irq_postinstall(struct drm_device *dev); -extern void i915_driver_irq_uninstall(struct drm_device * dev); - -extern irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS); -extern void ironlake_irq_preinstall(struct drm_device *dev); -extern int ironlake_irq_postinstall(struct drm_device *dev); -extern void ironlake_irq_uninstall(struct drm_device *dev); - -extern irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS); -extern void ivybridge_irq_preinstall(struct drm_device *dev); -extern int ivybridge_irq_postinstall(struct drm_device *dev); -extern void ivybridge_irq_uninstall(struct drm_device *dev); +extern void intel_irq_init(struct drm_device *dev); extern int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int i915_enable_vblank(struct drm_device *dev, int crtc); -extern void i915_disable_vblank(struct drm_device *dev, int crtc); -extern int ironlake_enable_vblank(struct drm_device *dev, int crtc); -extern void ironlake_disable_vblank(struct drm_device *dev, int crtc); -extern int ivybridge_enable_vblank(struct drm_device *dev, int crtc); -extern void ivybridge_disable_vblank(struct drm_device *dev, int crtc); -extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); -extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -1073,13 +1047,6 @@ void i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); void intel_enable_asle (struct drm_device *dev); -int i915_get_vblank_timestamp(struct drm_device *dev, int crtc, - int *max_error, - struct timeval *vblank_time, - unsigned flags); - -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, - int *vpos, int *hpos); #ifdef CONFIG_DEBUG_FS extern void i915_destroy_error_state(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0b2e167d2bce..5c0d1247f453 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,6 +31,7 @@ #include "i915_drv.h" #include "i915_trace.h" #include "intel_drv.h" +#include <linux/shmem_fs.h> #include <linux/slab.h> #include <linux/swap.h> #include <linux/pci.h> @@ -354,13 +355,12 @@ i915_gem_shmem_pread_fast(struct drm_device *dev, * page_offset = offset within page * page_length = bytes to copy for this page */ - page_offset = offset & (PAGE_SIZE-1); + page_offset = offset_in_page(offset); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -453,9 +453,9 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, * data_page_offset = offset with data_page_index page. * page_length = bytes to copy for this page */ - shmem_page_offset = offset & ~PAGE_MASK; + shmem_page_offset = offset_in_page(offset); data_page_index = data_ptr / PAGE_SIZE - first_data_page; - data_page_offset = data_ptr & ~PAGE_MASK; + data_page_offset = offset_in_page(data_ptr); page_length = remain; if ((shmem_page_offset + page_length) > PAGE_SIZE) @@ -463,10 +463,11 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); - if (IS_ERR(page)) - return PTR_ERR(page); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + goto out; + } if (do_bit17_swizzling) { slow_shmem_bit17_copy(page, @@ -638,8 +639,8 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, * page_offset = offset within page * page_length = bytes to copy for this page */ - page_base = (offset & ~(PAGE_SIZE-1)); - page_offset = offset & (PAGE_SIZE-1); + page_base = offset & PAGE_MASK; + page_offset = offset_in_page(offset); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; @@ -650,7 +651,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, */ if (fast_user_write(dev_priv->mm.gtt_mapping, page_base, page_offset, user_data, page_length)) - return -EFAULT; remain -= page_length; @@ -730,9 +730,9 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, * page_length = bytes to copy for this page */ gtt_page_base = offset & PAGE_MASK; - gtt_page_offset = offset & ~PAGE_MASK; + gtt_page_offset = offset_in_page(offset); data_page_index = data_ptr / PAGE_SIZE - first_data_page; - data_page_offset = data_ptr & ~PAGE_MASK; + data_page_offset = offset_in_page(data_ptr); page_length = remain; if ((gtt_page_offset + page_length) > PAGE_SIZE) @@ -791,13 +791,12 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev, * page_offset = offset within page * page_length = bytes to copy for this page */ - page_offset = offset & (PAGE_SIZE-1); + page_offset = offset_in_page(offset); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -896,9 +895,9 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, * data_page_offset = offset with data_page_index page. * page_length = bytes to copy for this page */ - shmem_page_offset = offset & ~PAGE_MASK; + shmem_page_offset = offset_in_page(offset); data_page_index = data_ptr / PAGE_SIZE - first_data_page; - data_page_offset = data_ptr & ~PAGE_MASK; + data_page_offset = offset_in_page(data_ptr); page_length = remain; if ((shmem_page_offset + page_length) > PAGE_SIZE) @@ -906,8 +905,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; @@ -1218,11 +1216,11 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) ret = i915_gem_object_bind_to_gtt(obj, 0, true); if (ret) goto unlock; - } - ret = i915_gem_object_set_to_gtt_domain(obj, write); - if (ret) - goto unlock; + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) + goto unlock; + } if (obj->tiling_mode == I915_TILING_NONE) ret = i915_gem_object_put_fence(obj); @@ -1450,8 +1448,9 @@ i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj) * edge of an even tile row (where tile rows are counted as if the bo is * placed in a fenced gtt region). */ - if (IS_GEN2(dev) || - (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) + if (IS_GEN2(dev)) + tile_height = 16; + else if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) tile_height = 32; else tile_height = 8; @@ -1556,12 +1555,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj, inode = obj->base.filp->f_path.dentry->d_inode; mapping = inode->i_mapping; + gfpmask |= mapping_gfp_mask(mapping); + for (i = 0; i < page_count; i++) { - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | - __GFP_COLD | - __GFP_RECLAIMABLE | - gfpmask); + page = shmem_read_mapping_page_gfp(mapping, i, gfpmask); if (IS_ERR(page)) goto err_pages; @@ -1699,13 +1696,10 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj) /* Our goal here is to return as much of the memory as * is possible back to the system as we are called from OOM. * To do this we must instruct the shmfs to drop all of its - * backing pages, *now*. Here we mirror the actions taken - * when by shmem_delete_inode() to release the backing store. + * backing pages, *now*. */ inode = obj->base.filp->f_path.dentry->d_inode; - truncate_inode_pages(inode->i_mapping, 0); - if (inode->i_op->truncate_range) - inode->i_op->truncate_range(inode, 0, (loff_t)-1); + shmem_truncate_range(inode, 0, (loff_t)-1); obj->madv = __I915_MADV_PURGED; } @@ -2078,8 +2072,8 @@ i915_wait_request(struct intel_ring_buffer *ring, if (!ier) { DRM_ERROR("something (likely vbetool) disabled " "interrupts, re-enabling\n"); - i915_driver_irq_preinstall(ring->dev); - i915_driver_irq_postinstall(ring->dev); + ring->dev->driver->irq_preinstall(ring->dev); + ring->dev->driver->irq_postinstall(ring->dev); } trace_i915_gem_request_wait_begin(ring, seqno); @@ -2924,8 +2918,6 @@ i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj) */ wmb(); - i915_gem_release_mmap(obj); - old_write_domain = obj->base.write_domain; obj->base.write_domain = 0; @@ -3565,6 +3557,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; + struct address_space *mapping; obj = kzalloc(sizeof(*obj), GFP_KERNEL); if (obj == NULL) @@ -3575,6 +3568,9 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, return NULL; } + mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; + mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE); + i915_gem_info_add_obj(dev_priv, size); obj->base.write_domain = I915_GEM_DOMAIN_CPU; @@ -3950,8 +3946,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, page_count = obj->base.size / PAGE_SIZE; for (i = 0; i < page_count; i++) { - struct page *page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + struct page *page = shmem_read_mapping_page(mapping, i); if (!IS_ERR(page)) { char *dst = kmap_atomic(page); memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE); @@ -4012,8 +4007,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, struct page *page; char *dst, *src; - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, i); if (IS_ERR(page)) return PTR_ERR(page); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 20a4cc5b818f..4934cf84c320 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -187,10 +187,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj, if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) i915_gem_clflush_object(obj); - /* blow away mappings if mapped through GTT */ - if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_GTT) - i915_gem_release_mmap(obj); - if (obj->base.pending_write_domain) cd->flips |= atomic_read(&obj->pending_flip); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b79619a7b788..3b03f85ea627 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -152,7 +152,7 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ -u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; @@ -184,7 +184,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return (high1 << 8) | low; } -u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int reg = PIPE_FRMCOUNT_GM45(pipe); @@ -198,7 +198,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) return I915_READ(reg); } -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, +static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, int *vpos, int *hpos) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -264,7 +264,7 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, return ret; } -int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, +static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, int *max_error, struct timeval *vblank_time, unsigned flags) @@ -462,7 +462,7 @@ static void pch_irq_handler(struct drm_device *dev) DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n"); } -irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -517,7 +517,7 @@ irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) if (de_iir & DE_PIPEA_VBLANK_IVB) drm_handle_vblank(dev, 0); - if (de_iir & DE_PIPEB_VBLANK_IVB); + if (de_iir & DE_PIPEB_VBLANK_IVB) drm_handle_vblank(dev, 1); /* check event from PCH */ @@ -550,7 +550,7 @@ done: return ret; } -irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1209,7 +1209,7 @@ static void i915_pageflip_stall_check(struct drm_device *dev, int pipe) } } -irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1454,7 +1454,7 @@ int i915_irq_wait(struct drm_device *dev, void *data, /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -int i915_enable_vblank(struct drm_device *dev, int pipe) +static int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1478,7 +1478,7 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ironlake_enable_vblank(struct drm_device *dev, int pipe) +static int ironlake_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1494,7 +1494,7 @@ int ironlake_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ivybridge_enable_vblank(struct drm_device *dev, int pipe) +static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1513,7 +1513,7 @@ int ivybridge_enable_vblank(struct drm_device *dev, int pipe) /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -void i915_disable_vblank(struct drm_device *dev, int pipe) +static void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1529,7 +1529,7 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ironlake_disable_vblank(struct drm_device *dev, int pipe) +static void ironlake_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1540,7 +1540,7 @@ void ironlake_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ivybridge_disable_vblank(struct drm_device *dev, int pipe) +static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1728,7 +1728,7 @@ repeat: /* drm_dma.h hooks */ -void ironlake_irq_preinstall(struct drm_device *dev) +static void ironlake_irq_preinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1740,6 +1740,17 @@ void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); + if (IS_GEN6(dev) || IS_GEN7(dev)) { + /* Workaround stalls observed on Sandy Bridge GPUs by + * making the blitter command streamer generate a + * write to the Hardware Status Page for + * MI_USER_INTERRUPT. This appears to serialize the + * previous seqno write out before the interrupt + * happens. + */ + I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT); + I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT); + } /* XXX hotplug from PCH */ @@ -1758,7 +1769,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) POSTING_READ(SDEIER); } -int ironlake_irq_postinstall(struct drm_device *dev) +static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1830,7 +1841,7 @@ int ironlake_irq_postinstall(struct drm_device *dev) return 0; } -int ivybridge_irq_postinstall(struct drm_device *dev) +static int ivybridge_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1880,7 +1891,7 @@ int ivybridge_irq_postinstall(struct drm_device *dev) return 0; } -void i915_driver_irq_preinstall(struct drm_device * dev) +static void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -1907,7 +1918,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev) * Must be called after intel_modeset_init or hotplug interrupts won't be * enabled correctly. */ -int i915_driver_irq_postinstall(struct drm_device *dev) +static int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; @@ -1983,7 +1994,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) return 0; } -void ironlake_irq_uninstall(struct drm_device *dev) +static void ironlake_irq_uninstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -2003,7 +2014,7 @@ void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(GTIIR, I915_READ(GTIIR)); } -void i915_driver_irq_uninstall(struct drm_device * dev) +static void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -2029,3 +2040,41 @@ void i915_driver_irq_uninstall(struct drm_device * dev) I915_READ(PIPESTAT(pipe)) & 0x8000ffff); I915_WRITE(IIR, I915_READ(IIR)); } + +void intel_irq_init(struct drm_device *dev) +{ + dev->driver->get_vblank_counter = i915_get_vblank_counter; + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { + dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ + dev->driver->get_vblank_counter = gm45_get_vblank_counter; + } + + + dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; + dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; + + if (IS_IVYBRIDGE(dev)) { + /* Share pre & uninstall handlers with ILK/SNB */ + dev->driver->irq_handler = ivybridge_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ivybridge_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ivybridge_enable_vblank; + dev->driver->disable_vblank = ivybridge_disable_vblank; + } else if (HAS_PCH_SPLIT(dev)) { + dev->driver->irq_handler = ironlake_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ironlake_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ironlake_enable_vblank; + dev->driver->disable_vblank = ironlake_disable_vblank; + } else { + dev->driver->irq_preinstall = i915_driver_irq_preinstall; + dev->driver->irq_postinstall = i915_driver_irq_postinstall; + dev->driver->irq_uninstall = i915_driver_irq_uninstall; + dev->driver->irq_handler = i915_driver_irq_handler; + dev->driver->enable_vblank = i915_enable_vblank; + dev->driver->disable_vblank = i915_disable_vblank; + } +} diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2f967af8e62e..5d5def756c9e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -531,6 +531,7 @@ #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0 #define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3) +#define GEN6_BSD_HWSTAM 0x12098 #define GEN6_BSD_IMR 0x120a8 #define GEN6_BSD_USER_INTERRUPT (1 << 12) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 60a94d2b5264..5257cfc34c35 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -597,7 +597,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) return; } -void i915_save_display(struct drm_device *dev) +static void i915_save_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -689,7 +689,7 @@ void i915_save_display(struct drm_device *dev) i915_save_vga(dev); } -void i915_restore_display(struct drm_device *dev) +static void i915_restore_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -780,6 +780,7 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); else I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -796,6 +797,8 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ dev_priv->saveHWS = I915_READ(HWS_PGA); @@ -835,6 +838,8 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -845,6 +850,8 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ I915_WRITE(HWS_PGA, dev_priv->saveHWS); @@ -862,6 +869,7 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(IER, dev_priv->saveIER); I915_WRITE(IMR, dev_priv->saveIMR); } + mutex_unlock(&dev->struct_mutex); intel_init_clock_gating(dev); @@ -873,6 +881,8 @@ int i915_restore_state(struct drm_device *dev) if (IS_GEN6(dev)) gen6_enable_rps(dev_priv); + mutex_lock(&dev->struct_mutex); + /* Cache mode state */ I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); @@ -886,6 +896,8 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 3; i++) I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + mutex_unlock(&dev->struct_mutex); + intel_i2c_reset(dev); return 0; diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index e93f93cc7e78..0979d8877880 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -288,6 +288,8 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) * This may be a DVI-I connector with a shared DDC * link between analog and digital outputs, so we * have to check the EDID input spec of the attached device. + * + * On the other hand, what should we do if it is a broken EDID? */ if (edid != NULL) { is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; @@ -298,6 +300,8 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) if (!is_digital) { DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n"); return true; + } else { + DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); } } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f553ddfdc168..21b6f93fe919 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3983,54 +3983,6 @@ static void i830_update_wm(struct drm_device *dev) #define ILK_LP0_PLANE_LATENCY 700 #define ILK_LP0_CURSOR_LATENCY 1300 -static bool ironlake_compute_wm0(struct drm_device *dev, - int pipe, - const struct intel_watermark_params *display, - int display_latency_ns, - const struct intel_watermark_params *cursor, - int cursor_latency_ns, - int *plane_wm, - int *cursor_wm) -{ - struct drm_crtc *crtc; - int htotal, hdisplay, clock, pixel_size; - int line_time_us, line_count; - int entries, tlb_miss; - - crtc = intel_get_crtc_for_pipe(dev, pipe); - if (crtc->fb == NULL || !crtc->enabled) - return false; - - htotal = crtc->mode.htotal; - hdisplay = crtc->mode.hdisplay; - clock = crtc->mode.clock; - pixel_size = crtc->fb->bits_per_pixel / 8; - - /* Use the small buffer method to calculate plane watermark */ - entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000; - tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8; - if (tlb_miss > 0) - entries += tlb_miss; - entries = DIV_ROUND_UP(entries, display->cacheline_size); - *plane_wm = entries + display->guard_size; - if (*plane_wm > (int)display->max_wm) - *plane_wm = display->max_wm; - - /* Use the large buffer method to calculate cursor watermark */ - line_time_us = ((htotal * 1000) / clock); - line_count = (cursor_latency_ns / line_time_us + 1000) / 1000; - entries = line_count * 64 * pixel_size; - tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8; - if (tlb_miss > 0) - entries += tlb_miss; - entries = DIV_ROUND_UP(entries, cursor->cacheline_size); - *cursor_wm = entries + cursor->guard_size; - if (*cursor_wm > (int)cursor->max_wm) - *cursor_wm = (int)cursor->max_wm; - - return true; -} - /* * Check the wm result. * @@ -4139,12 +4091,12 @@ static void ironlake_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (ironlake_compute_wm0(dev, 0, - &ironlake_display_wm_info, - ILK_LP0_PLANE_LATENCY, - &ironlake_cursor_wm_info, - ILK_LP0_CURSOR_LATENCY, - &plane_wm, &cursor_wm)) { + if (g4x_compute_wm0(dev, 0, + &ironlake_display_wm_info, + ILK_LP0_PLANE_LATENCY, + &ironlake_cursor_wm_info, + ILK_LP0_CURSOR_LATENCY, + &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEA_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe A -" @@ -4153,12 +4105,12 @@ static void ironlake_update_wm(struct drm_device *dev) enabled |= 1; } - if (ironlake_compute_wm0(dev, 1, - &ironlake_display_wm_info, - ILK_LP0_PLANE_LATENCY, - &ironlake_cursor_wm_info, - ILK_LP0_CURSOR_LATENCY, - &plane_wm, &cursor_wm)) { + if (g4x_compute_wm0(dev, 1, + &ironlake_display_wm_info, + ILK_LP0_PLANE_LATENCY, + &ironlake_cursor_wm_info, + ILK_LP0_CURSOR_LATENCY, + &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEB_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe B -" @@ -4223,10 +4175,10 @@ static void sandybridge_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (ironlake_compute_wm0(dev, 0, - &sandybridge_display_wm_info, latency, - &sandybridge_cursor_wm_info, latency, - &plane_wm, &cursor_wm)) { + if (g4x_compute_wm0(dev, 0, + &sandybridge_display_wm_info, latency, + &sandybridge_cursor_wm_info, latency, + &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEA_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe A -" @@ -4235,10 +4187,10 @@ static void sandybridge_update_wm(struct drm_device *dev) enabled |= 1; } - if (ironlake_compute_wm0(dev, 1, - &sandybridge_display_wm_info, latency, - &sandybridge_cursor_wm_info, latency, - &plane_wm, &cursor_wm)) { + if (g4x_compute_wm0(dev, 1, + &sandybridge_display_wm_info, latency, + &sandybridge_cursor_wm_info, latency, + &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEB_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe B -" @@ -4735,6 +4687,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); + intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -5265,8 +5218,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -6310,6 +6261,197 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) spin_unlock_irqrestore(&dev->event_lock, flags); } +static int intel_gen2_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + /* Can't queue multiple flips, so wait for the previous + * one to finish before executing the next. + */ + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen3_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP_I915 | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen4_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + /* i965+ uses the linear or tiled offsets from the + * Display Registers (which do not change across a page-flip) + * so we need only reprogram the base address. + */ + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset | obj->tiling_mode); + + /* XXX Enabling the panel-fitter across page-flip is so far + * untested on non-native modes, so ignore it for now. + * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + */ + pf = 0; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen6_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch | obj->tiling_mode); + OUT_RING(obj->gtt_offset); + + pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +/* + * On gen7 we currently use the blit ring because (in early silicon at least) + * the render ring doesn't give us interrpts for page flip completion, which + * means clients will hang after the first flip is queued. Fortunately the + * blit ring generates interrupts properly, so use it instead. + */ +static int intel_gen7_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_ring_buffer *ring = &dev_priv->ring[BCS]; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, ring); + if (ret) + goto out; + + ret = intel_ring_begin(ring, 4); + if (ret) + goto out; + + intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); + intel_ring_emit(ring, (fb->pitch | obj->tiling_mode)); + intel_ring_emit(ring, (obj->gtt_offset)); + intel_ring_emit(ring, (MI_NOOP)); + intel_ring_advance(ring); +out: + return ret; +} + +static int intel_default_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + return -ENODEV; +} + static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) @@ -6320,9 +6462,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_i915_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; - unsigned long flags, offset; - int pipe = intel_crtc->pipe; - u32 pf, pipesrc; + unsigned long flags; int ret; work = kzalloc(sizeof *work, GFP_KERNEL); @@ -6351,9 +6491,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, obj = intel_fb->obj; mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); - if (ret) - goto cleanup_work; /* Reference the objects for the scheduled work. */ drm_gem_object_reference(&work->old_fb_obj->base); @@ -6365,91 +6502,18 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, if (ret) goto cleanup_objs; - if (IS_GEN3(dev) || IS_GEN2(dev)) { - u32 flip_mask; - - /* Can't queue multiple flips, so wait for the previous - * one to finish before executing the next. - */ - ret = BEGIN_LP_RING(2); - if (ret) - goto cleanup_objs; - - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); - OUT_RING(MI_NOOP); - ADVANCE_LP_RING(); - } - work->pending_flip_obj = obj; work->enable_stall_check = true; - /* Offset into the new buffer for cases of shared fbs between CRTCs */ - offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; - - ret = BEGIN_LP_RING(4); - if (ret) - goto cleanup_objs; - /* Block clients from rendering to the new back buffer until * the flip occurs and the object is no longer visible. */ atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); - switch (INTEL_INFO(dev)->gen) { - case 2: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 3: - OUT_RING(MI_DISPLAY_FLIP_I915 | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 4: - case 5: - /* i965+ uses the linear or tiled offsets from the - * Display Registers (which do not change across a page-flip) - * so we need only reprogram the base address. - */ - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset | obj->tiling_mode); - - /* XXX Enabling the panel-fitter across page-flip is so far - * untested on non-native modes, so ignore it for now. - * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; - */ - pf = 0; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - - case 6: - case 7: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch | obj->tiling_mode); - OUT_RING(obj->gtt_offset); - - pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - } - ADVANCE_LP_RING(); + ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); + if (ret) + goto cleanup_pending; mutex_unlock(&dev->struct_mutex); @@ -6457,10 +6521,11 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, return 0; +cleanup_pending: + atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); -cleanup_work: mutex_unlock(&dev->struct_mutex); spin_lock_irqsave(&dev->event_lock, flags); @@ -7675,6 +7740,7 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = NULL; } else dev_priv->display.update_wm = pineview_update_wm; + dev_priv->display.init_clock_gating = gen3_init_clock_gating; } else if (IS_G4X(dev)) { dev_priv->display.update_wm = g4x_update_wm; dev_priv->display.init_clock_gating = g4x_init_clock_gating; @@ -7704,6 +7770,31 @@ static void intel_init_display(struct drm_device *dev) else dev_priv->display.get_fifo_size = i830_get_fifo_size; } + + /* Default just returns -ENODEV to indicate unsupported */ + dev_priv->display.queue_flip = intel_default_queue_flip; + + switch (INTEL_INFO(dev)->gen) { + case 2: + dev_priv->display.queue_flip = intel_gen2_queue_flip; + break; + + case 3: + dev_priv->display.queue_flip = intel_gen3_queue_flip; + break; + + case 4: + case 5: + dev_priv->display.queue_flip = intel_gen4_queue_flip; + break; + + case 6: + dev_priv->display.queue_flip = intel_gen6_queue_flip; + break; + case 7: + dev_priv->display.queue_flip = intel_gen7_queue_flip; + break; + } } /* diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index a4d80314e7f8..e2aced6eec4c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -50,7 +50,6 @@ struct intel_dp { bool has_audio; int force_audio; uint32_t color_range; - int dpms_mode; uint8_t link_bw; uint8_t lane_count; uint8_t dpcd[4]; @@ -59,8 +58,6 @@ struct intel_dp { bool is_pch_edp; uint8_t train_set[4]; uint8_t link_status[DP_LINK_STATUS_SIZE]; - - struct drm_property *force_audio_property; }; /** @@ -140,8 +137,8 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) { int max_lane_count = 4; - if (intel_dp->dpcd[0] >= 0x11) { - max_lane_count = intel_dp->dpcd[2] & 0x1f; + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; switch (max_lane_count) { case 1: case 2: case 4: break; @@ -155,7 +152,7 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) static int intel_dp_max_link_bw(struct intel_dp *intel_dp) { - int max_link_bw = intel_dp->dpcd[1]; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; switch (max_link_bw) { case DP_LINK_BW_1_62: @@ -776,7 +773,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* * Check for DPCD version > 1.1 and enhanced framing support */ - if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) { + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; intel_dp->DP |= DP_ENHANCED_FRAMING; } @@ -944,11 +942,44 @@ static void ironlake_edp_pll_off(struct drm_encoder *encoder) udelay(200); } +/* If the sink supports it, try to set the power state appropriately */ +static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) +{ + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_write_1(intel_dp, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + msleep(1); + } + } +} + static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_device *dev = encoder->dev; + /* Wake up the sink first */ + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + if (is_edp(intel_dp)) { ironlake_edp_backlight_off(dev); ironlake_edp_panel_off(dev); @@ -992,6 +1023,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (mode != DRM_MODE_DPMS_ON) { if (is_edp(intel_dp)) ironlake_edp_backlight_off(dev); + intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); if (is_edp(intel_dp)) ironlake_edp_panel_off(dev); @@ -1000,6 +1032,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) } else { if (is_edp(intel_dp)) ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { intel_dp_start_link_train(intel_dp); if (is_edp(intel_dp)) { @@ -1011,7 +1044,31 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (is_edp(intel_dp)) ironlake_edp_backlight_on(dev); } - intel_dp->dpms_mode = mode; +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + */ +static bool +intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, + uint8_t *recv, int recv_bytes) +{ + int ret, i; + + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_read(intel_dp, address, recv, + recv_bytes); + if (ret == recv_bytes) + return true; + msleep(1); + } + + return false; } /* @@ -1021,14 +1078,10 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) static bool intel_dp_get_link_status(struct intel_dp *intel_dp) { - int ret; - - ret = intel_dp_aux_native_read(intel_dp, - DP_LANE0_1_STATUS, - intel_dp->link_status, DP_LINK_STATUS_SIZE); - if (ret != DP_LINK_STATUS_SIZE) - return false; - return true; + return intel_dp_aux_native_read_retry(intel_dp, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); } static uint8_t @@ -1517,6 +1570,8 @@ intel_dp_link_down(struct intel_dp *intel_dp) static void intel_dp_check_link_status(struct intel_dp *intel_dp) { + int ret; + if (!intel_dp->base.base.crtc) return; @@ -1525,6 +1580,15 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; } + /* Try to read receiver status if the link appears to be up */ + ret = intel_dp_aux_native_read(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret != sizeof(intel_dp->dpcd)) { + intel_dp_link_down(intel_dp); + return; + } + if (!intel_channel_eq_ok(intel_dp)) { intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); @@ -1535,6 +1599,7 @@ static enum drm_connector_status ironlake_dp_detect(struct intel_dp *intel_dp) { enum drm_connector_status status; + bool ret; /* Can't disconnect eDP, but you can close the lid... */ if (is_edp(intel_dp)) { @@ -1545,13 +1610,11 @@ ironlake_dp_detect(struct intel_dp *intel_dp) } status = connector_status_disconnected; - if (intel_dp_aux_native_read(intel_dp, - 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)) - == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) - status = connector_status_connected; - } + ret = intel_dp_aux_native_read_retry(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret && intel_dp->dpcd[DP_DPCD_REV] != 0) + status = connector_status_connected; DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); return status; @@ -1588,7 +1651,7 @@ g4x_dp_detect(struct intel_dp *intel_dp) if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd, sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) + if (intel_dp->dpcd[DP_DPCD_REV] != 0) status = connector_status_connected; } @@ -1702,7 +1765,7 @@ intel_dp_set_property(struct drm_connector *connector, if (ret) return ret; - if (property == intel_dp->force_audio_property) { + if (property == dev_priv->force_audio_property) { int i = val; bool has_audio; @@ -1792,8 +1855,7 @@ intel_dp_hot_plug(struct intel_encoder *intel_encoder) { struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base); - if (intel_dp->dpms_mode == DRM_MODE_DPMS_ON) - intel_dp_check_link_status(intel_dp); + intel_dp_check_link_status(intel_dp); } /* Return which DP Port should be selected for Transcoder DP control */ @@ -1841,16 +1903,7 @@ bool intel_dpd_is_edp(struct drm_device *dev) static void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) { - struct drm_device *dev = connector->dev; - - intel_dp->force_audio_property = - drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2); - if (intel_dp->force_audio_property) { - intel_dp->force_audio_property->values[0] = -1; - intel_dp->force_audio_property->values[1] = 1; - drm_connector_attach_property(connector, intel_dp->force_audio_property, 0); - } - + intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); } @@ -1870,7 +1923,6 @@ intel_dp_init(struct drm_device *dev, int output_reg) return; intel_dp->output_reg = output_reg; - intel_dp->dpms_mode = -1; intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { @@ -1965,8 +2017,9 @@ intel_dp_init(struct drm_device *dev, int output_reg) sizeof(intel_dp->dpcd)); ironlake_edp_panel_vdd_off(intel_dp); if (ret == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] >= 0x11) - dev_priv->no_aux_handshake = intel_dp->dpcd[3] & + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) + dev_priv->no_aux_handshake = + intel_dp->dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING; } else { /* if this fails, presume the device is a ghost */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 831d7a4a0d18..9ffa61eb4d7e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -236,6 +236,7 @@ struct intel_unpin_work { int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus); +extern void intel_attach_force_audio_property(struct drm_connector *connector); extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector); extern void intel_crt_init(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f289b8642976..aa0a8e83142e 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -45,7 +45,6 @@ struct intel_hdmi { bool has_hdmi_sink; bool has_audio; int force_audio; - struct drm_property *force_audio_property; }; static struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder) @@ -194,7 +193,7 @@ static int intel_hdmi_mode_valid(struct drm_connector *connector, if (mode->clock > 165000) return MODE_CLOCK_HIGH; if (mode->clock < 20000) - return MODE_CLOCK_HIGH; + return MODE_CLOCK_LOW; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; @@ -287,7 +286,7 @@ intel_hdmi_set_property(struct drm_connector *connector, if (ret) return ret; - if (property == intel_hdmi->force_audio_property) { + if (property == dev_priv->force_audio_property) { int i = val; bool has_audio; @@ -365,16 +364,7 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { static void intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector) { - struct drm_device *dev = connector->dev; - - intel_hdmi->force_audio_property = - drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2); - if (intel_hdmi->force_audio_property) { - intel_hdmi->force_audio_property->values[0] = -1; - intel_hdmi->force_audio_property->values[1] = 1; - drm_connector_attach_property(connector, intel_hdmi->force_audio_property, 0); - } - + intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); } diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index d3b903bce7c5..d98cee60b602 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -401,8 +401,7 @@ int intel_setup_gmbus(struct drm_device *dev) bus->reg0 = i | GMBUS_RATE_100KHZ; /* XXX force bit banging until GMBUS is fully debugged */ - if (IS_GEN2(dev)) - bus->force_bit = intel_gpio_create(dev_priv, i); + bus->force_bit = intel_gpio_create(dev_priv, i); } intel_i2c_reset(dev_priv->dev); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 67cb076d271b..b28f7bd9f88a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -727,6 +727,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_PRODUCT_NAME, "U800"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Asus EeeBox PC EB1007", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"), + }, + }, { } /* terminating entry */ }; diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 9034dd8f33c7..3b26a3ba02dd 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -81,6 +81,36 @@ int intel_ddc_get_modes(struct drm_connector *connector, return ret; } +static const char *force_audio_names[] = { + "off", + "auto", + "on", +}; + +void +intel_attach_force_audio_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_property *prop; + int i; + + prop = dev_priv->force_audio_property; + if (prop == NULL) { + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, + "audio", + ARRAY_SIZE(force_audio_names)); + if (prop == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) + drm_property_add_enum(prop, i, i-1, force_audio_names[i]); + + dev_priv->force_audio_property = prop; + } + drm_connector_attach_property(connector, prop, 0); +} + static const char *broadcast_rgb_names[] = { "Full", "Limited 16:235", diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index a670c006982e..9e2959bc91cd 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -1409,6 +1409,11 @@ void intel_setup_overlay(struct drm_device *dev) overlay = kzalloc(sizeof(struct intel_overlay), GFP_KERNEL); if (!overlay) return; + + mutex_lock(&dev->struct_mutex); + if (WARN_ON(dev_priv->overlay)) + goto out_free; + overlay->dev = dev; reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE); @@ -1448,7 +1453,7 @@ void intel_setup_overlay(struct drm_device *dev) regs = intel_overlay_map_regs(overlay); if (!regs) - goto out_free_bo; + goto out_unpin_bo; memset(regs, 0, sizeof(struct overlay_registers)); update_polyphase_filter(regs); @@ -1457,14 +1462,17 @@ void intel_setup_overlay(struct drm_device *dev) intel_overlay_unmap_regs(overlay, regs); dev_priv->overlay = overlay; + mutex_unlock(&dev->struct_mutex); DRM_INFO("initialized overlay support\n"); return; out_unpin_bo: - i915_gem_object_unpin(reg_bo); + if (!OVERLAY_NEEDS_PHYSICAL(dev)) + i915_gem_object_unpin(reg_bo); out_free_bo: drm_gem_object_unreference(®_bo->base); out_free: + mutex_unlock(&dev->struct_mutex); kfree(overlay); return; } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index c0e0ee63fbf4..39ac2b634ae5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -165,7 +165,7 @@ void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring); int __must_check intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n); static inline int intel_wait_ring_idle(struct intel_ring_buffer *ring) { - return intel_wait_ring_buffer(ring, ring->space - 8); + return intel_wait_ring_buffer(ring, ring->size - 8); } int __must_check intel_ring_begin(struct intel_ring_buffer *ring, int n); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 754086f83941..30fe554d8936 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -148,8 +148,6 @@ struct intel_sdvo_connector { int format_supported_num; struct drm_property *tv_format; - struct drm_property *force_audio_property; - /* add the property for the SDVO-TV */ struct drm_property *left; struct drm_property *right; @@ -1712,7 +1710,7 @@ intel_sdvo_set_property(struct drm_connector *connector, if (ret) return ret; - if (property == intel_sdvo_connector->force_audio_property) { + if (property == dev_priv->force_audio_property) { int i = val; bool has_audio; @@ -2037,15 +2035,7 @@ intel_sdvo_add_hdmi_properties(struct intel_sdvo_connector *connector) { struct drm_device *dev = connector->base.base.dev; - connector->force_audio_property = - drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2); - if (connector->force_audio_property) { - connector->force_audio_property->values[0] = -1; - connector->force_audio_property->values[1] = 1; - drm_connector_attach_property(&connector->base.base, - connector->force_audio_property, 0); - } - + intel_attach_force_audio_property(&connector->base.base); if (INTEL_INFO(dev)->gen >= 4 && IS_MOBILE(dev)) intel_attach_broadcast_rgb_property(&connector->base.base); } diff --git a/drivers/gpu/drm/mga/mga_drv.h b/drivers/gpu/drm/mga/mga_drv.h index 1084fa4d261b..54558a01969a 100644 --- a/drivers/gpu/drm/mga/mga_drv.h +++ b/drivers/gpu/drm/mga/mga_drv.h @@ -195,29 +195,10 @@ extern long mga_compat_ioctl(struct file *filp, unsigned int cmd, #define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER() -#if defined(__linux__) && defined(__alpha__) -#define MGA_BASE(reg) ((unsigned long)(dev_priv->mmio->handle)) -#define MGA_ADDR(reg) (MGA_BASE(reg) + reg) - -#define MGA_DEREF(reg) (*(volatile u32 *)MGA_ADDR(reg)) -#define MGA_DEREF8(reg) (*(volatile u8 *)MGA_ADDR(reg)) - -#define MGA_READ(reg) (_MGA_READ((u32 *)MGA_ADDR(reg))) -#define MGA_READ8(reg) (_MGA_READ((u8 *)MGA_ADDR(reg))) -#define MGA_WRITE(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0) -#define MGA_WRITE8(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0) - -static inline u32 _MGA_READ(u32 *addr) -{ - DRM_MEMORYBARRIER(); - return *(volatile u32 *)addr; -} -#else #define MGA_READ8(reg) DRM_READ8(dev_priv->mmio, (reg)) #define MGA_READ(reg) DRM_READ32(dev_priv->mmio, (reg)) #define MGA_WRITE8(reg, val) DRM_WRITE8(dev_priv->mmio, (reg), (val)) #define MGA_WRITE(reg, val) DRM_WRITE32(dev_priv->mmio, (reg), (val)) -#endif #define DWGREG0 0x1c00 #define DWGREG0_END 0x1dff diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index f0d459bb46e4..525744d593c1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -262,7 +262,6 @@ static bool nouveau_dsm_detect(void) vga_count++; retval = nouveau_dsm_pci_probe(pdev); - printk("ret val is %d\n", retval); if (retval & NOUVEAU_DSM_HAS_MUX) has_dsm |= 1; if (retval & NOUVEAU_DSM_HAS_OPT) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 4b9f4493c9f9..7347075ca5b8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -339,11 +339,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema) int ret; if (dev_priv->chipset < 0x84) { - ret = RING_SPACE(chan, 3); + ret = RING_SPACE(chan, 4); if (ret) return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 2); + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 3); + OUT_RING (chan, NvSema); OUT_RING (chan, sema->mem->start); OUT_RING (chan, 1); } else @@ -351,10 +352,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema) struct nouveau_vma *vma = &dev_priv->fence.bo->vma; u64 offset = vma->offset + sema->mem->start; - ret = RING_SPACE(chan, 5); + ret = RING_SPACE(chan, 7); if (ret) return ret; + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); + OUT_RING (chan, chan->vram_handle); BEGIN_RING(chan, NvSubSw, 0x0010, 4); OUT_RING (chan, upper_32_bits(offset)); OUT_RING (chan, lower_32_bits(offset)); @@ -394,11 +397,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema) int ret; if (dev_priv->chipset < 0x84) { - ret = RING_SPACE(chan, 4); + ret = RING_SPACE(chan, 5); if (ret) return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 1); + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 2); + OUT_RING (chan, NvSema); OUT_RING (chan, sema->mem->start); BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_RELEASE, 1); OUT_RING (chan, 1); @@ -407,10 +411,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema) struct nouveau_vma *vma = &dev_priv->fence.bo->vma; u64 offset = vma->offset + sema->mem->start; - ret = RING_SPACE(chan, 5); + ret = RING_SPACE(chan, 7); if (ret) return ret; + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); + OUT_RING (chan, chan->vram_handle); BEGIN_RING(chan, NvSubSw, 0x0010, 4); OUT_RING (chan, upper_32_bits(offset)); OUT_RING (chan, lower_32_bits(offset)); @@ -504,22 +510,22 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) struct nouveau_gpuobj *obj = NULL; int ret; - if (dev_priv->card_type >= NV_C0) - goto out_initialised; + if (dev_priv->card_type < NV_C0) { + /* Create an NV_SW object for various sync purposes */ + ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW); + if (ret) + return ret; - /* Create an NV_SW object for various sync purposes */ - ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW); - if (ret) - return ret; + ret = RING_SPACE(chan, 2); + if (ret) + return ret; - /* we leave subchannel empty for nvc0 */ - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, 0, 1); - OUT_RING(chan, NvSw); + BEGIN_RING(chan, NvSubSw, 0, 1); + OUT_RING (chan, NvSw); + FIRE_RING (chan); + } - /* Create a DMA object for the shared cross-channel sync area. */ + /* Setup area of memory shared between all channels for x-chan sync */ if (USE_SEMA(dev) && dev_priv->chipset < 0x84) { struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem; @@ -534,23 +540,8 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) nouveau_gpuobj_ref(NULL, &obj); if (ret) return ret; - - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); - OUT_RING(chan, NvSema); - } else { - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); - OUT_RING (chan, chan->vram_handle); /* whole VM */ } - FIRE_RING(chan); - -out_initialised: INIT_LIST_HEAD(&chan->fence.pending); spin_lock_init(&chan->fence.lock); atomic_set(&chan->fence.last_sequence_irq, 0); diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.c b/drivers/gpu/drm/nouveau/nouveau_hw.c index 053edf9d2f67..ba896e54b799 100644 --- a/drivers/gpu/drm/nouveau/nouveau_hw.c +++ b/drivers/gpu/drm/nouveau/nouveau_hw.c @@ -900,6 +900,7 @@ nv_save_state_ext(struct drm_device *dev, int head, } /* NV11 and NV20 don't have this, they stop at 0x52. */ if (nv_gf4_disp_arch(dev)) { + rd_cio_state(dev, head, regp, NV_CIO_CRE_42); rd_cio_state(dev, head, regp, NV_CIO_CRE_53); rd_cio_state(dev, head, regp, NV_CIO_CRE_54); @@ -1003,6 +1004,7 @@ nv_load_state_ext(struct drm_device *dev, int head, nouveau_wait_eq(dev, 650000000, NV_PRMCIO_INP0__COLOR, 0x8, 0x0); } + wr_cio_state(dev, head, regp, NV_CIO_CRE_42); wr_cio_state(dev, head, regp, NV_CIO_CRE_53); wr_cio_state(dev, head, regp, NV_CIO_CRE_54); diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 2960f583dc38..5ee14d216ce8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -397,7 +397,7 @@ nouveau_mem_vram_init(struct drm_device *dev) if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(40))) dma_bits = 40; } else - if (drm_pci_device_is_pcie(dev) && + if (0 && drm_pci_device_is_pcie(dev) && dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) { if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(39))) @@ -868,7 +868,9 @@ nouveau_gart_manager_del(struct ttm_mem_type_manager *man, nouveau_vm_unmap(&node->tmp_vma); nouveau_vm_put(&node->tmp_vma); } + mem->mm_node = NULL; + kfree(node); } static int diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c index 922fb6b664ed..ef9dec0e6f8b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_perf.c +++ b/drivers/gpu/drm/nouveau/nouveau_perf.c @@ -182,6 +182,11 @@ nouveau_perf_init(struct drm_device *dev) entries = perf[2]; } + if (entries > NOUVEAU_PM_MAX_LEVEL) { + NV_DEBUG(dev, "perf table has too many entries - buggy vbios?\n"); + entries = NOUVEAU_PM_MAX_LEVEL; + } + entry = perf + headerlen; for (i = 0; i < entries; i++) { struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl]; diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index c77111eca6ac..82fad914e648 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -458,7 +458,7 @@ nouveau_sgdma_init(struct drm_device *dev) dev_priv->gart_info.type = NOUVEAU_GART_HW; dev_priv->gart_info.func = &nv50_sgdma_backend; } else - if (drm_pci_device_is_pcie(dev) && + if (0 && drm_pci_device_is_pcie(dev) && dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) { if (nv44_graph_class(dev)) { dev_priv->gart_info.func = &nv44_sgdma_backend; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 38ea662568c1..731acea865b5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -563,68 +563,68 @@ nouveau_card_init(struct drm_device *dev) if (ret) goto out_timer; - switch (dev_priv->card_type) { - case NV_04: - nv04_graph_create(dev); - break; - case NV_10: - nv10_graph_create(dev); - break; - case NV_20: - case NV_30: - nv20_graph_create(dev); - break; - case NV_40: - nv40_graph_create(dev); - break; - case NV_50: - nv50_graph_create(dev); - break; - case NV_C0: - nvc0_graph_create(dev); - break; - default: - break; - } - - switch (dev_priv->chipset) { - case 0x84: - case 0x86: - case 0x92: - case 0x94: - case 0x96: - case 0xa0: - nv84_crypt_create(dev); - break; - } + if (!nouveau_noaccel) { + switch (dev_priv->card_type) { + case NV_04: + nv04_graph_create(dev); + break; + case NV_10: + nv10_graph_create(dev); + break; + case NV_20: + case NV_30: + nv20_graph_create(dev); + break; + case NV_40: + nv40_graph_create(dev); + break; + case NV_50: + nv50_graph_create(dev); + break; + case NV_C0: + nvc0_graph_create(dev); + break; + default: + break; + } - switch (dev_priv->card_type) { - case NV_50: switch (dev_priv->chipset) { - case 0xa3: - case 0xa5: - case 0xa8: - case 0xaf: - nva3_copy_create(dev); + case 0x84: + case 0x86: + case 0x92: + case 0x94: + case 0x96: + case 0xa0: + nv84_crypt_create(dev); break; } - break; - case NV_C0: - nvc0_copy_create(dev, 0); - nvc0_copy_create(dev, 1); - break; - default: - break; - } - if (dev_priv->card_type == NV_40) - nv40_mpeg_create(dev); - else - if (dev_priv->card_type == NV_50 && - (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0)) - nv50_mpeg_create(dev); + switch (dev_priv->card_type) { + case NV_50: + switch (dev_priv->chipset) { + case 0xa3: + case 0xa5: + case 0xa8: + case 0xaf: + nva3_copy_create(dev); + break; + } + break; + case NV_C0: + nvc0_copy_create(dev, 0); + nvc0_copy_create(dev, 1); + break; + default: + break; + } + + if (dev_priv->card_type == NV_40) + nv40_mpeg_create(dev); + else + if (dev_priv->card_type == NV_50 && + (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0)) + nv50_mpeg_create(dev); - if (!nouveau_noaccel) { for (e = 0; e < NVOBJ_ENGINE_NR; e++) { if (dev_priv->eng[e]) { ret = dev_priv->eng[e]->init(dev, e); @@ -880,8 +880,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) #ifdef __BIG_ENDIAN /* Put the card in BE mode if it's not */ - if (nv_rd32(dev, NV03_PMC_BOOT_1)) - nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001); + if (nv_rd32(dev, NV03_PMC_BOOT_1) != 0x01000001) + nv_wr32(dev, NV03_PMC_BOOT_1, 0x01000001); DRM_MEMORYBARRIER(); #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_vm.c b/drivers/gpu/drm/nouveau/nouveau_vm.c index 0059e6f58a8b..519a6b4bba46 100644 --- a/drivers/gpu/drm/nouveau/nouveau_vm.c +++ b/drivers/gpu/drm/nouveau/nouveau_vm.c @@ -58,6 +58,7 @@ nouveau_vm_map_at(struct nouveau_vma *vma, u64 delta, struct nouveau_mem *node) num -= len; pte += len; if (unlikely(end >= max)) { + phys += len << (bits + 12); pde++; pte = 0; } diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index 3c78bc81357e..f1a3ae491995 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -376,7 +376,10 @@ nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode) */ /* framebuffer can be larger than crtc scanout area. */ - regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8); + regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = + XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8); + regp->CRTC[NV_CIO_CRE_42] = + XLATE(fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11); regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ? MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00; regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) | @@ -824,8 +827,11 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc, regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitch >> 3; regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = XLATE(drm_fb->pitch >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8); + regp->CRTC[NV_CIO_CRE_42] = + XLATE(drm_fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11); crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX); crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX); + crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_42); /* Update the framebuffer location. */ regp->fb_start = nv_crtc->fb.offset & ~3; diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 74a3f6872701..08da478ba544 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -409,7 +409,7 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct nouveau_channel *evo = dispc->sync; int ret; - ret = RING_SPACE(evo, 24); + ret = RING_SPACE(evo, chan ? 25 : 27); if (unlikely(ret)) return ret; @@ -458,8 +458,19 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb, /* queue the flip on the crtc's "display sync" channel */ BEGIN_RING(evo, 0, 0x0100, 1); OUT_RING (evo, 0xfffe0000); - BEGIN_RING(evo, 0, 0x0084, 5); - OUT_RING (evo, chan ? 0x00000100 : 0x00000010); + if (chan) { + BEGIN_RING(evo, 0, 0x0084, 1); + OUT_RING (evo, 0x00000100); + } else { + BEGIN_RING(evo, 0, 0x0084, 1); + OUT_RING (evo, 0x00000010); + /* allows gamma somehow, PDISP will bitch at you if + * you don't wait for vblank before changing this.. + */ + BEGIN_RING(evo, 0, 0x00e0, 1); + OUT_RING (evo, 0x40000000); + } + BEGIN_RING(evo, 0, 0x0088, 4); OUT_RING (evo, dispc->sem.offset); OUT_RING (evo, 0xf00d0000 | dispc->sem.value); OUT_RING (evo, 0x74b1e000); diff --git a/drivers/gpu/drm/nouveau/nvreg.h b/drivers/gpu/drm/nouveau/nvreg.h index fe0f253089ac..bbfb1a68fb11 100644 --- a/drivers/gpu/drm/nouveau/nvreg.h +++ b/drivers/gpu/drm/nouveau/nvreg.h @@ -277,6 +277,8 @@ # define NV_CIO_CRE_EBR_VDE_11 2:2 # define NV_CIO_CRE_EBR_VRS_11 4:4 # define NV_CIO_CRE_EBR_VBS_11 6:6 +# define NV_CIO_CRE_42 0x42 +# define NV_CIO_CRE_42_OFFSET_11 6:6 # define NV_CIO_CRE_43 0x43 # define NV_CIO_CRE_44 0x44 /* head control */ # define NV_CIO_CRE_CSB 0x45 /* colour saturation boost */ diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig index 9746fee59f56..ea92bbe3ed37 100644 --- a/drivers/gpu/drm/radeon/Kconfig +++ b/drivers/gpu/drm/radeon/Kconfig @@ -28,11 +28,4 @@ config DRM_RADEON_KMS The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory - not owned by the process supplying the command stream. This part - of the code is still incomplete and this why we propose that patch - as a staging driver addition, future security might forbid current - experimental userspace to run. - - This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX - (radeon up to X1950). Works is underway to provide support for R6XX, - R7XX and newer hardware (radeon from HD2XXX to HD4XXX). + not owned by the process supplying the command stream. diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 49611e2365d9..1b50ad8919d5 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -1200,6 +1200,7 @@ typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11 #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12 +#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14 // ucConfig #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index ec848787d7d9..9541995e4b21 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -671,6 +671,13 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, DISPPLL_CONFIG_DUAL_LINK; } } + if (radeon_encoder_is_dp_bridge(encoder)) { + struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder); + struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder); + args.v3.sInput.ucExtTransmitterID = ext_radeon_encoder->encoder_id; + } else + args.v3.sInput.ucExtTransmitterID = 0; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); adjusted_clock = le32_to_cpu(args.v3.sOutput.ulDispPllFreq) * 10; @@ -1045,7 +1052,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE); - u32 tmp; + u32 tmp, viewport_w, viewport_h; int r; /* no fb bound */ @@ -1171,8 +1178,10 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, y &= ~1; WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset, (x << 16) | y); + viewport_w = crtc->mode.hdisplay; + viewport_h = (crtc->mode.vdisplay + 1) & ~1; WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset, - (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay); + (viewport_w << 16) | viewport_h); /* pageflip setup */ /* make sure flip is at vb rather than hb */ @@ -1213,7 +1222,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE; - u32 tmp; + u32 tmp, viewport_w, viewport_h; int r; /* no fb bound */ @@ -1338,8 +1347,10 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, y &= ~1; WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset, (x << 16) | y); + viewport_w = crtc->mode.hdisplay; + viewport_h = (crtc->mode.vdisplay + 1) & ~1; WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset, - (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay); + (viewport_w << 16) | viewport_h); /* pageflip setup */ /* make sure flip is at vb rather than hb */ diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.c b/drivers/gpu/drm/radeon/cayman_blit_shaders.c index e148ab04b80b..7b4eeb7b4a8c 100644 --- a/drivers/gpu/drm/radeon/cayman_blit_shaders.c +++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.c @@ -39,17 +39,335 @@ const u32 cayman_default_state[] = { - /* XXX fill in additional blit state */ + 0xc0066900, + 0x00000000, + 0x00000060, /* DB_RENDER_CONTROL */ + 0x00000000, /* DB_COUNT_CONTROL */ + 0x00000000, /* DB_DEPTH_VIEW */ + 0x0000002a, /* DB_RENDER_OVERRIDE */ + 0x00000000, /* DB_RENDER_OVERRIDE2 */ + 0x00000000, /* DB_HTILE_DATA_BASE */ 0xc0026900, - 0x00000316, - 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */ - 0x00000010, /* */ + 0x0000000a, + 0x00000000, /* DB_STENCIL_CLEAR */ + 0x00000000, /* DB_DEPTH_CLEAR */ + + 0xc0036900, + 0x0000000f, + 0x00000000, /* DB_DEPTH_INFO */ + 0x00000000, /* DB_Z_INFO */ + 0x00000000, /* DB_STENCIL_INFO */ + + 0xc0016900, + 0x00000080, + 0x00000000, /* PA_SC_WINDOW_OFFSET */ + + 0xc00d6900, + 0x00000083, + 0x0000ffff, /* PA_SC_CLIPRECT_RULE */ + 0x00000000, /* PA_SC_CLIPRECT_0_TL */ + 0x20002000, /* PA_SC_CLIPRECT_0_BR */ + 0x00000000, + 0x20002000, + 0x00000000, + 0x20002000, + 0x00000000, + 0x20002000, + 0xaaaaaaaa, /* PA_SC_EDGERULE */ + 0x00000000, /* PA_SU_HARDWARE_SCREEN_OFFSET */ + 0x0000000f, /* CB_TARGET_MASK */ + 0x0000000f, /* CB_SHADER_MASK */ + + 0xc0226900, + 0x00000094, + 0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */ + 0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */ + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x00000000, /* PA_SC_VPORT_ZMIN_0 */ + 0x3f800000, /* PA_SC_VPORT_ZMAX_0 */ + + 0xc0016900, + 0x000000d4, + 0x00000000, /* SX_MISC */ 0xc0026900, 0x000000d9, 0x00000000, /* CP_RINGID */ 0x00000000, /* CP_VMID */ + + 0xc0096900, + 0x00000100, + 0x00ffffff, /* VGT_MAX_VTX_INDX */ + 0x00000000, /* VGT_MIN_VTX_INDX */ + 0x00000000, /* VGT_INDX_OFFSET */ + 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */ + 0x00000000, /* SX_ALPHA_TEST_CONTROL */ + 0x00000000, /* CB_BLEND_RED */ + 0x00000000, /* CB_BLEND_GREEN */ + 0x00000000, /* CB_BLEND_BLUE */ + 0x00000000, /* CB_BLEND_ALPHA */ + + 0xc0016900, + 0x00000187, + 0x00000100, /* SPI_VS_OUT_ID_0 */ + + 0xc0026900, + 0x00000191, + 0x00000100, /* SPI_PS_INPUT_CNTL_0 */ + 0x00000101, /* SPI_PS_INPUT_CNTL_1 */ + + 0xc0016900, + 0x000001b1, + 0x00000000, /* SPI_VS_OUT_CONFIG */ + + 0xc0106900, + 0x000001b3, + 0x20000001, /* SPI_PS_IN_CONTROL_0 */ + 0x00000000, /* SPI_PS_IN_CONTROL_1 */ + 0x00000000, /* SPI_INTERP_CONTROL_0 */ + 0x00000000, /* SPI_INPUT_Z */ + 0x00000000, /* SPI_FOG_CNTL */ + 0x00100000, /* SPI_BARYC_CNTL */ + 0x00000000, /* SPI_PS_IN_CONTROL_2 */ + 0x00000000, /* SPI_COMPUTE_INPUT_CNTL */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_X */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Y */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Z */ + 0x00000000, /* SPI_GPR_MGMT */ + 0x00000000, /* SPI_LDS_MGMT */ + 0x00000000, /* SPI_STACK_MGMT */ + 0x00000000, /* SPI_WAVE_MGMT_1 */ + 0x00000000, /* SPI_WAVE_MGMT_2 */ + + 0xc0016900, + 0x000001e0, + 0x00000000, /* CB_BLEND0_CONTROL */ + + 0xc00e6900, + 0x00000200, + 0x00000000, /* DB_DEPTH_CONTROL */ + 0x00000000, /* DB_EQAA */ + 0x00cc0010, /* CB_COLOR_CONTROL */ + 0x00000210, /* DB_SHADER_CONTROL */ + 0x00010000, /* PA_CL_CLIP_CNTL */ + 0x00000004, /* PA_SU_SC_MODE_CNTL */ + 0x00000100, /* PA_CL_VTE_CNTL */ + 0x00000000, /* PA_CL_VS_OUT_CNTL */ + 0x00000000, /* PA_CL_NANINF_CNTL */ + 0x00000000, /* PA_SU_LINE_STIPPLE_CNTL */ + 0x00000000, /* PA_SU_LINE_STIPPLE_SCALE */ + 0x00000000, /* PA_SU_PRIM_FILTER_CNTL */ + 0x00000000, /* */ + 0x00000000, /* */ + + 0xc0026900, + 0x00000229, + 0x00000000, /* SQ_PGM_START_FS */ + 0x00000000, + + 0xc0016900, + 0x0000023b, + 0x00000000, /* SQ_LDS_ALLOC_PS */ + + 0xc0066900, + 0x00000240, + 0x00000000, /* SQ_ESGS_RING_ITEMSIZE */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0046900, + 0x00000247, + 0x00000000, /* SQ_GS_VERT_ITEMSIZE */ + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0116900, + 0x00000280, + 0x00000000, /* PA_SU_POINT_SIZE */ + 0x00000000, /* PA_SU_POINT_MINMAX */ + 0x00000008, /* PA_SU_LINE_CNTL */ + 0x00000000, /* PA_SC_LINE_STIPPLE */ + 0x00000000, /* VGT_OUTPUT_PATH_CNTL */ + 0x00000000, /* VGT_HOS_CNTL */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, /* VGT_GS_MODE */ + + 0xc0026900, + 0x00000292, + 0x00000000, /* PA_SC_MODE_CNTL_0 */ + 0x00000000, /* PA_SC_MODE_CNTL_1 */ + + 0xc0016900, + 0x000002a1, + 0x00000000, /* VGT_PRIMITIVEID_EN */ + + 0xc0016900, + 0x000002a5, + 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_EN */ + + 0xc0026900, + 0x000002a8, + 0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */ + 0x00000000, + + 0xc0026900, + 0x000002ad, + 0x00000000, /* VGT_REUSE_OFF */ + 0x00000000, + + 0xc0016900, + 0x000002d5, + 0x00000000, /* VGT_SHADER_STAGES_EN */ + + 0xc0016900, + 0x000002dc, + 0x0000aa00, /* DB_ALPHA_TO_MASK */ + + 0xc0066900, + 0x000002de, + 0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0026900, + 0x000002e5, + 0x00000000, /* VGT_STRMOUT_CONFIG */ + 0x00000000, + + 0xc01b6900, + 0x000002f5, + 0x76543210, /* PA_SC_CENTROID_PRIORITY_0 */ + 0xfedcba98, /* PA_SC_CENTROID_PRIORITY_1 */ + 0x00000000, /* PA_SC_LINE_CNTL */ + 0x00000000, /* PA_SC_AA_CONFIG */ + 0x00000005, /* PA_SU_VTX_CNTL */ + 0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */ + 0x3f800000, /* PA_CL_GB_VERT_DISC_ADJ */ + 0x3f800000, /* PA_CL_GB_HORZ_CLIP_ADJ */ + 0x3f800000, /* PA_CL_GB_HORZ_DISC_ADJ */ + 0x00000000, /* PA_SC_AA_SAMPLE_LOCS_PIXEL_X0Y0_0 */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0xffffffff, /* PA_SC_AA_MASK_X0Y0_X1Y0 */ + 0xffffffff, + + 0xc0026900, + 0x00000316, + 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */ + 0x00000010, /* */ +}; + +const u32 cayman_vs[] = +{ + 0x00000004, + 0x80400400, + 0x0000a03c, + 0x95000688, + 0x00004000, + 0x15000688, + 0x00000000, + 0x88000000, + 0x04000000, + 0x67961001, +#ifdef __BIG_ENDIAN + 0x00020000, +#else + 0x00000000, +#endif + 0x00000000, + 0x04000000, + 0x67961000, +#ifdef __BIG_ENDIAN + 0x00020008, +#else + 0x00000008, +#endif + 0x00000000, +}; + +const u32 cayman_ps[] = +{ + 0x00000004, + 0xa00c0000, + 0x00000008, + 0x80400000, + 0x00000000, + 0x95000688, + 0x00000000, + 0x88000000, + 0x00380400, + 0x00146b10, + 0x00380000, + 0x20146b10, + 0x00380400, + 0x40146b00, + 0x80380000, + 0x60146b00, + 0x00000010, + 0x000d1000, + 0xb0800000, + 0x00000000, }; +const u32 cayman_ps_size = ARRAY_SIZE(cayman_ps); +const u32 cayman_vs_size = ARRAY_SIZE(cayman_vs); const u32 cayman_default_size = ARRAY_SIZE(cayman_default_state); diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.h b/drivers/gpu/drm/radeon/cayman_blit_shaders.h index 33b75e5d0fa4..f5d0e9a60267 100644 --- a/drivers/gpu/drm/radeon/cayman_blit_shaders.h +++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.h @@ -25,8 +25,11 @@ #ifndef CAYMAN_BLIT_SHADERS_H #define CAYMAN_BLIT_SHADERS_H +extern const u32 cayman_ps[]; +extern const u32 cayman_vs[]; extern const u32 cayman_default_state[]; +extern const u32 cayman_ps_size, cayman_vs_size; extern const u32 cayman_default_size; #endif diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 7c37638095f7..15bd0477a3e8 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -88,21 +88,40 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) /* get temperature in millidegrees */ int evergreen_get_temp(struct radeon_device *rdev) { - u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> - ASIC_T_SHIFT; - u32 actual_temp = 0; - - if (temp & 0x400) - actual_temp = -256; - else if (temp & 0x200) - actual_temp = 255; - else if (temp & 0x100) { - actual_temp = temp & 0x1ff; - actual_temp |= ~0x1ff; - } else - actual_temp = temp & 0xff; + u32 temp, toffset; + int actual_temp = 0; + + if (rdev->family == CHIP_JUNIPER) { + toffset = (RREG32(CG_THERMAL_CTRL) & TOFFSET_MASK) >> + TOFFSET_SHIFT; + temp = (RREG32(CG_TS0_STATUS) & TS0_ADC_DOUT_MASK) >> + TS0_ADC_DOUT_SHIFT; + + if (toffset & 0x100) + actual_temp = temp / 2 - (0x200 - toffset); + else + actual_temp = temp / 2 + toffset; + + actual_temp = actual_temp * 1000; + + } else { + temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> + ASIC_T_SHIFT; + + if (temp & 0x400) + actual_temp = -256; + else if (temp & 0x200) + actual_temp = 255; + else if (temp & 0x100) { + actual_temp = temp & 0x1ff; + actual_temp |= ~0x1ff; + } else + actual_temp = temp & 0xff; + + actual_temp = (actual_temp * 1000) / 2; + } - return (actual_temp * 1000) / 2; + return actual_temp; } int sumo_get_temp(struct radeon_device *rdev) @@ -121,11 +140,17 @@ void evergreen_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if (voltage->type == VOLTAGE_SW) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage); } + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->vddci == 0xff01) + return; if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) { radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI); rdev->pm.current_vddci = voltage->vddci; @@ -960,17 +985,19 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav { save->vga_control[0] = RREG32(D1VGA_CONTROL); save->vga_control[1] = RREG32(D2VGA_CONTROL); - save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); - save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); - save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); - save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->vga_render_control = RREG32(VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET); save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { + save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); + save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET); save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); + save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET); save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); } @@ -979,35 +1006,45 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav WREG32(VGA_RENDER_CONTROL, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(D1VGA_CONTROL, 0); WREG32(D2VGA_CONTROL, 0); - WREG32(EVERGREEN_D3VGA_CONTROL, 0); - WREG32(EVERGREEN_D4VGA_CONTROL, 0); - WREG32(EVERGREEN_D5VGA_CONTROL, 0); - WREG32(EVERGREEN_D6VGA_CONTROL, 0); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, 0); + WREG32(EVERGREEN_D4VGA_CONTROL, 0); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, 0); + WREG32(EVERGREEN_D6VGA_CONTROL, 0); + } } void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save) @@ -1030,7 +1067,7 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC1_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, @@ -1048,7 +1085,8 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s (u32)rdev->mc.vram_start); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC3_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, @@ -1076,31 +1114,41 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s /* Restore video state */ WREG32(D1VGA_CONTROL, save->vga_control[0]); WREG32(D2VGA_CONTROL, save->vga_control[1]); - WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); - WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); - WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); - WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); + WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); + WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -1415,6 +1463,8 @@ static u32 evergreen_get_tile_pipe_to_backend_map(struct radeon_device *rdev, case CHIP_CEDAR: case CHIP_REDWOOD: case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: case CHIP_TURKS: case CHIP_CAICOS: force_no_swizzle = false; @@ -1544,6 +1594,8 @@ static void evergreen_program_channel_remap(struct radeon_device *rdev) case CHIP_REDWOOD: case CHIP_CEDAR: case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: case CHIP_TURKS: case CHIP_CAICOS: default: @@ -1689,6 +1741,54 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30; rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130; break; + case CHIP_SUMO: + rdev->config.evergreen.num_ses = 1; + rdev->config.evergreen.max_pipes = 4; + rdev->config.evergreen.max_tile_pipes = 2; + if (rdev->pdev->device == 0x9648) + rdev->config.evergreen.max_simds = 3; + else if ((rdev->pdev->device == 0x9647) || + (rdev->pdev->device == 0x964a)) + rdev->config.evergreen.max_simds = 4; + else + rdev->config.evergreen.max_simds = 5; + rdev->config.evergreen.max_backends = 2 * rdev->config.evergreen.num_ses; + rdev->config.evergreen.max_gprs = 256; + rdev->config.evergreen.max_threads = 248; + rdev->config.evergreen.max_gs_threads = 32; + rdev->config.evergreen.max_stack_entries = 256; + rdev->config.evergreen.sx_num_of_sets = 4; + rdev->config.evergreen.sx_max_export_size = 256; + rdev->config.evergreen.sx_max_export_pos_size = 64; + rdev->config.evergreen.sx_max_export_smx_size = 192; + rdev->config.evergreen.max_hw_contexts = 8; + rdev->config.evergreen.sq_num_cf_insts = 2; + + rdev->config.evergreen.sc_prim_fifo_size = 0x40; + rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30; + rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130; + break; + case CHIP_SUMO2: + rdev->config.evergreen.num_ses = 1; + rdev->config.evergreen.max_pipes = 4; + rdev->config.evergreen.max_tile_pipes = 4; + rdev->config.evergreen.max_simds = 2; + rdev->config.evergreen.max_backends = 1 * rdev->config.evergreen.num_ses; + rdev->config.evergreen.max_gprs = 256; + rdev->config.evergreen.max_threads = 248; + rdev->config.evergreen.max_gs_threads = 32; + rdev->config.evergreen.max_stack_entries = 512; + rdev->config.evergreen.sx_num_of_sets = 4; + rdev->config.evergreen.sx_max_export_size = 256; + rdev->config.evergreen.sx_max_export_pos_size = 64; + rdev->config.evergreen.sx_max_export_smx_size = 192; + rdev->config.evergreen.max_hw_contexts = 8; + rdev->config.evergreen.sq_num_cf_insts = 2; + + rdev->config.evergreen.sc_prim_fifo_size = 0x40; + rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30; + rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130; + break; case CHIP_BARTS: rdev->config.evergreen.num_ses = 2; rdev->config.evergreen.max_pipes = 4; @@ -1900,7 +2000,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) gb_backend_map = 0x66442200; break; case CHIP_JUNIPER: - gb_backend_map = 0x00006420; + gb_backend_map = 0x00002200; break; default: gb_backend_map = @@ -1936,9 +2036,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.tile_config |= (3 << 0); break; } - /* num banks is 8 on all fusion asics */ + /* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */ if (rdev->flags & RADEON_IS_IGP) - rdev->config.evergreen.tile_config |= 8 << 4; + rdev->config.evergreen.tile_config |= 1 << 4; else rdev->config.evergreen.tile_config |= ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4; @@ -2039,6 +2139,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_CEDAR: case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: case CHIP_CAICOS: /* no vertex cache */ sq_config &= ~VC_ENABLE; @@ -2060,6 +2162,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_CEDAR: case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: ps_thread_count = 96; break; default: @@ -2099,6 +2203,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_CEDAR: case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: case CHIP_CAICOS: vgt_cache_invalidation = CACHE_INVALIDATION(TC_ONLY); break; @@ -2165,7 +2271,10 @@ int evergreen_mc_init(struct radeon_device *rdev) /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; - tmp = RREG32(MC_ARB_RAMCFG); + if (rdev->flags & RADEON_IS_IGP) + tmp = RREG32(FUS_MC_ARB_RAMCFG); + else + tmp = RREG32(MC_ARB_RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { chansize = 16; } else if (tmp & CHANSIZE_MASK) { @@ -2331,18 +2440,22 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) WREG32(GRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -2461,19 +2574,25 @@ int evergreen_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, crtc5); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + if (rdev->num_crtc >= 4) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); + } + if (rdev->num_crtc >= 6) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + } WREG32(DC_HPD1_INT_CONTROL, hpd1); WREG32(DC_HPD2_INT_CONTROL, hpd2); @@ -2497,53 +2616,57 @@ static inline void evergreen_irq_ack(struct radeon_device *rdev) rdev->irq.stat_regs.evergreen.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5); rdev->irq.stat_regs.evergreen.d1grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET); rdev->irq.stat_regs.evergreen.d2grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (rdev->irq.stat_regs.evergreen.d1grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.evergreen.d2grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + if (rdev->num_crtc >= 4) { + if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); + } + + if (rdev->num_crtc >= 6) { + if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + } if (rdev->irq.stat_regs.evergreen.disp_int & DC_HPD1_INTERRUPT) { tmp = RREG32(DC_HPD1_INT_CONTROL); @@ -2618,28 +2741,25 @@ static inline u32 evergreen_get_ih_wptr(struct radeon_device *rdev) int evergreen_irq_process(struct radeon_device *rdev) { - u32 wptr = evergreen_get_ih_wptr(rdev); - u32 rptr = rdev->ih.rptr; + u32 wptr; + u32 rptr; u32 src_id, src_data; u32 ring_index; unsigned long flags; bool queue_hotplug = false; - DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); - if (!rdev->ih.enabled) + if (!rdev->ih.enabled || rdev->shutdown) return IRQ_NONE; - spin_lock_irqsave(&rdev->ih.lock, flags); + wptr = evergreen_get_ih_wptr(rdev); + rptr = rdev->ih.rptr; + DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); + spin_lock_irqsave(&rdev->ih.lock, flags); if (rptr == wptr) { spin_unlock_irqrestore(&rdev->ih.lock, flags); return IRQ_NONE; } - if (rdev->shutdown) { - spin_unlock_irqrestore(&rdev->ih.lock, flags); - return IRQ_NONE; - } - restart_ih: /* display interrupts */ evergreen_irq_ack(rdev); @@ -2868,7 +2988,7 @@ restart_ih: radeon_fence_process(rdev); break; case 233: /* GUI IDLE */ - DRM_DEBUG("IH: CP EOP\n"); + DRM_DEBUG("IH: GUI idle\n"); rdev->pm.gui_idle = true; wake_up(&rdev->irq.idle_queue); break; @@ -3154,6 +3274,7 @@ void evergreen_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); evergreen_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c index ba06a69c6de8..2eb251858e72 100644 --- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c +++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c @@ -31,6 +31,7 @@ #include "evergreend.h" #include "evergreen_blit_shaders.h" +#include "cayman_blit_shaders.h" #define DI_PT_RECTLIST 0x11 #define DI_INDEX_SIZE_16_BIT 0x0 @@ -152,6 +153,8 @@ set_vtx_resource(struct radeon_device *rdev, u64 gpu_addr) if ((rdev->family == CHIP_CEDAR) || (rdev->family == CHIP_PALM) || + (rdev->family == CHIP_SUMO) || + (rdev->family == CHIP_SUMO2) || (rdev->family == CHIP_CAICOS)) cp_set_surface_sync(rdev, PACKET3_TC_ACTION_ENA, 48, gpu_addr); @@ -199,6 +202,16 @@ static void set_scissors(struct radeon_device *rdev, int x1, int y1, int x2, int y2) { + /* workaround some hw bugs */ + if (x2 == 0) + x1 = 1; + if (y2 == 0) + y1 = 1; + if (rdev->family == CHIP_CAYMAN) { + if ((x2 == 1) && (y2 == 1)) + x2 = 2; + } + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONTEXT_REG, 2)); radeon_ring_write(rdev, (PA_SC_SCREEN_SCISSOR_TL - PACKET3_SET_CONTEXT_REG_START) >> 2); radeon_ring_write(rdev, (x1 << 0) | (y1 << 16)); @@ -239,7 +252,7 @@ draw_auto(struct radeon_device *rdev) } -/* emits 36 */ +/* emits 39 */ static void set_default_state(struct radeon_device *rdev) { @@ -255,238 +268,289 @@ set_default_state(struct radeon_device *rdev) u64 gpu_addr; int dwords; - switch (rdev->family) { - case CHIP_CEDAR: - default: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 96; - num_vs_threads = 16; - num_gs_threads = 16; - num_es_threads = 16; - num_hs_threads = 16; - num_ls_threads = 16; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_REDWOOD: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_JUNIPER: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_CYPRESS: - case CHIP_HEMLOCK: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_PALM: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 96; - num_vs_threads = 16; - num_gs_threads = 16; - num_es_threads = 16; - num_hs_threads = 16; - num_ls_threads = 16; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_BARTS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_TURKS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_CAICOS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 10; - num_gs_threads = 10; - num_es_threads = 10; - num_hs_threads = 10; - num_ls_threads = 10; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - } - - if ((rdev->family == CHIP_CEDAR) || - (rdev->family == CHIP_PALM) || - (rdev->family == CHIP_CAICOS)) - sq_config = 0; - else - sq_config = VC_ENABLE; - - sq_config |= (EXPORT_SRC_C | - CS_PRIO(0) | - LS_PRIO(0) | - HS_PRIO(0) | - PS_PRIO(0) | - VS_PRIO(1) | - GS_PRIO(2) | - ES_PRIO(3)); - - sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) | - NUM_VS_GPRS(num_vs_gprs) | - NUM_CLAUSE_TEMP_GPRS(num_temp_gprs)); - sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) | - NUM_ES_GPRS(num_es_gprs)); - sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) | - NUM_LS_GPRS(num_ls_gprs)); - sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) | - NUM_VS_THREADS(num_vs_threads) | - NUM_GS_THREADS(num_gs_threads) | - NUM_ES_THREADS(num_es_threads)); - sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) | - NUM_LS_THREADS(num_ls_threads)); - sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) | - NUM_VS_STACK_ENTRIES(num_vs_stack_entries)); - sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) | - NUM_ES_STACK_ENTRIES(num_es_stack_entries)); - sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) | - NUM_LS_STACK_ENTRIES(num_ls_stack_entries)); - /* set clear context state */ radeon_ring_write(rdev, PACKET3(PACKET3_CLEAR_STATE, 0)); radeon_ring_write(rdev, 0); - /* disable dyn gprs */ - radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); - radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2); - radeon_ring_write(rdev, 0); + if (rdev->family < CHIP_CAYMAN) { + switch (rdev->family) { + case CHIP_CEDAR: + default: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 16; + num_gs_threads = 16; + num_es_threads = 16; + num_hs_threads = 16; + num_ls_threads = 16; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_REDWOOD: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_JUNIPER: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_CYPRESS: + case CHIP_HEMLOCK: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_PALM: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 16; + num_gs_threads = 16; + num_es_threads = 16; + num_hs_threads = 16; + num_ls_threads = 16; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_SUMO: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 25; + num_gs_threads = 25; + num_es_threads = 25; + num_hs_threads = 25; + num_ls_threads = 25; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_SUMO2: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 25; + num_gs_threads = 25; + num_es_threads = 25; + num_hs_threads = 25; + num_ls_threads = 25; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_BARTS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_TURKS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_CAICOS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 10; + num_gs_threads = 10; + num_es_threads = 10; + num_hs_threads = 10; + num_ls_threads = 10; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + } - /* SQ config */ - radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11)); - radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2); - radeon_ring_write(rdev, sq_config); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_1); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_2); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_3); - radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, sq_thread_resource_mgmt); - radeon_ring_write(rdev, sq_thread_resource_mgmt_2); - radeon_ring_write(rdev, sq_stack_resource_mgmt_1); - radeon_ring_write(rdev, sq_stack_resource_mgmt_2); - radeon_ring_write(rdev, sq_stack_resource_mgmt_3); + if ((rdev->family == CHIP_CEDAR) || + (rdev->family == CHIP_PALM) || + (rdev->family == CHIP_SUMO) || + (rdev->family == CHIP_SUMO2) || + (rdev->family == CHIP_CAICOS)) + sq_config = 0; + else + sq_config = VC_ENABLE; + + sq_config |= (EXPORT_SRC_C | + CS_PRIO(0) | + LS_PRIO(0) | + HS_PRIO(0) | + PS_PRIO(0) | + VS_PRIO(1) | + GS_PRIO(2) | + ES_PRIO(3)); + + sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) | + NUM_VS_GPRS(num_vs_gprs) | + NUM_CLAUSE_TEMP_GPRS(num_temp_gprs)); + sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) | + NUM_ES_GPRS(num_es_gprs)); + sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) | + NUM_LS_GPRS(num_ls_gprs)); + sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) | + NUM_VS_THREADS(num_vs_threads) | + NUM_GS_THREADS(num_gs_threads) | + NUM_ES_THREADS(num_es_threads)); + sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) | + NUM_LS_THREADS(num_ls_threads)); + sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) | + NUM_VS_STACK_ENTRIES(num_vs_stack_entries)); + sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) | + NUM_ES_STACK_ENTRIES(num_es_stack_entries)); + sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) | + NUM_LS_STACK_ENTRIES(num_ls_stack_entries)); + + /* disable dyn gprs */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); + radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, 0); + + /* setup LDS */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); + radeon_ring_write(rdev, (SQ_LDS_RESOURCE_MGMT - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, 0x10001000); + + /* SQ config */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11)); + radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, sq_config); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_1); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_2); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_3); + radeon_ring_write(rdev, 0); + radeon_ring_write(rdev, 0); + radeon_ring_write(rdev, sq_thread_resource_mgmt); + radeon_ring_write(rdev, sq_thread_resource_mgmt_2); + radeon_ring_write(rdev, sq_stack_resource_mgmt_1); + radeon_ring_write(rdev, sq_stack_resource_mgmt_2); + radeon_ring_write(rdev, sq_stack_resource_mgmt_3); + } /* CONTEXT_CONTROL */ radeon_ring_write(rdev, 0xc0012800); @@ -560,7 +624,10 @@ int evergreen_blit_init(struct radeon_device *rdev) mutex_init(&rdev->r600_blit.mutex); rdev->r600_blit.state_offset = 0; - rdev->r600_blit.state_len = evergreen_default_size; + if (rdev->family < CHIP_CAYMAN) + rdev->r600_blit.state_len = evergreen_default_size; + else + rdev->r600_blit.state_len = cayman_default_size; dwords = rdev->r600_blit.state_len; while (dwords & 0xf) { @@ -572,11 +639,17 @@ int evergreen_blit_init(struct radeon_device *rdev) obj_size = ALIGN(obj_size, 256); rdev->r600_blit.vs_offset = obj_size; - obj_size += evergreen_vs_size * 4; + if (rdev->family < CHIP_CAYMAN) + obj_size += evergreen_vs_size * 4; + else + obj_size += cayman_vs_size * 4; obj_size = ALIGN(obj_size, 256); rdev->r600_blit.ps_offset = obj_size; - obj_size += evergreen_ps_size * 4; + if (rdev->family < CHIP_CAYMAN) + obj_size += evergreen_ps_size * 4; + else + obj_size += cayman_ps_size * 4; obj_size = ALIGN(obj_size, 256); r = radeon_bo_create(rdev, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM, @@ -599,16 +672,29 @@ int evergreen_blit_init(struct radeon_device *rdev) return r; } - memcpy_toio(ptr + rdev->r600_blit.state_offset, - evergreen_default_state, rdev->r600_blit.state_len * 4); - - if (num_packet2s) - memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), - packet2s, num_packet2s * 4); - for (i = 0; i < evergreen_vs_size; i++) - *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]); - for (i = 0; i < evergreen_ps_size; i++) - *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]); + if (rdev->family < CHIP_CAYMAN) { + memcpy_toio(ptr + rdev->r600_blit.state_offset, + evergreen_default_state, rdev->r600_blit.state_len * 4); + + if (num_packet2s) + memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), + packet2s, num_packet2s * 4); + for (i = 0; i < evergreen_vs_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]); + for (i = 0; i < evergreen_ps_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]); + } else { + memcpy_toio(ptr + rdev->r600_blit.state_offset, + cayman_default_state, rdev->r600_blit.state_len * 4); + + if (num_packet2s) + memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), + packet2s, num_packet2s * 4); + for (i = 0; i < cayman_vs_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(cayman_vs[i]); + for (i = 0; i < cayman_ps_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(cayman_ps[i]); + } radeon_bo_kunmap(rdev->r600_blit.shader_obj); radeon_bo_unreserve(rdev->r600_blit.shader_obj); @@ -692,7 +778,7 @@ int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) /* calculate number of loops correctly */ ring_size = num_loops * dwords_per_loop; /* set default + shaders */ - ring_size += 52; /* shaders + def state */ + ring_size += 55; /* shaders + def state */ ring_size += 10; /* fence emit for VB IB */ ring_size += 5; /* done copy */ ring_size += 10; /* fence emit for done copy */ diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index f37e91ee8a11..b7b2714f0b32 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -168,10 +168,16 @@ #define SE_DB_BUSY (1 << 30) #define SE_CB_BUSY (1 << 31) /* evergreen */ +#define CG_THERMAL_CTRL 0x72c +#define TOFFSET_MASK 0x00003FE0 +#define TOFFSET_SHIFT 5 #define CG_MULT_THERMAL_STATUS 0x740 #define ASIC_T(x) ((x) << 16) -#define ASIC_T_MASK 0x7FF0000 +#define ASIC_T_MASK 0x07FF0000 #define ASIC_T_SHIFT 16 +#define CG_TS0_STATUS 0x760 +#define TS0_ADC_DOUT_MASK 0x000003FF +#define TS0_ADC_DOUT_SHIFT 0 /* APU */ #define CG_THERMAL_STATUS 0x678 @@ -460,7 +466,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 @@ -541,7 +547,7 @@ # define LB_D5_VBLANK_INTERRUPT (1 << 3) # define DC_HPD5_INTERRUPT (1 << 17) # define DC_HPD5_RX_INTERRUPT (1 << 18) -#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6050 +#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150 # define LB_D6_VLINE_INTERRUPT (1 << 2) # define LB_D6_VBLANK_INTERRUPT (1 << 3) # define DC_HPD6_INTERRUPT (1 << 17) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index b205ba1cdd8f..559dbd412906 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1387,14 +1387,12 @@ static int cayman_startup(struct radeon_device *rdev) return r; cayman_gpu_init(rdev); -#if 0 - r = cayman_blit_init(rdev); + r = evergreen_blit_init(rdev); if (r) { - cayman_blit_fini(rdev); + evergreen_blit_fini(rdev); rdev->asic->copy = NULL; dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); } -#endif /* allocate wb buffer */ r = radeon_wb_init(rdev); @@ -1452,7 +1450,7 @@ int cayman_resume(struct radeon_device *rdev) int cayman_suspend(struct radeon_device *rdev) { - /* int r; */ + int r; /* FIXME: we should wait for ring to be empty */ cayman_cp_enable(rdev, false); @@ -1461,14 +1459,13 @@ int cayman_suspend(struct radeon_device *rdev) radeon_wb_disable(rdev); cayman_pcie_gart_disable(rdev); -#if 0 /* unpin shaders bo */ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); if (likely(r == 0)) { radeon_bo_unpin(rdev->r600_blit.shader_obj); radeon_bo_unreserve(rdev->r600_blit.shader_obj); } -#endif + return 0; } @@ -1580,10 +1577,11 @@ int cayman_init(struct radeon_device *rdev) void cayman_fini(struct radeon_device *rdev) { - /* cayman_blit_fini(rdev); */ + evergreen_blit_fini(rdev); cayman_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); cayman_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index 9736746da2d6..4672869cdb26 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -320,7 +320,7 @@ #define CGTS_USER_TCC_DISABLE 0x914C #define TCC_DISABLE_MASK 0xFFFF0000 #define TCC_DISABLE_SHIFT 16 -#define CGTS_SM_CTRL_REG 0x915C +#define CGTS_SM_CTRL_REG 0x9150 #define OVERRIDE (1 << 21) #define TA_CNTL_AUX 0x9508 diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index 2fef9de7f363..686f9dc5d4bd 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -63,7 +63,7 @@ struct r100_cs_track { unsigned num_arrays; unsigned max_indx; unsigned color_channel_mask; - struct r100_cs_track_array arrays[11]; + struct r100_cs_track_array arrays[16]; struct r100_cs_track_cb cb[R300_MAX_CB]; struct r100_cs_track_cb zb; struct r100_cs_track_cb aa; @@ -146,6 +146,12 @@ static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p, ib = p->ib->ptr; track = (struct r100_cs_track *)p->track; c = radeon_get_ib_value(p, idx++) & 0x1F; + if (c > 16) { + DRM_ERROR("Only 16 vertex buffers are allowed %d\n", + pkt->opcode); + r100_cs_dump_packet(p, pkt); + return -EINVAL; + } track->num_arrays = c; for (i = 0; i < (c - 1); i+=2, idx+=3) { r = r100_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6f27593901c7..bc54b26cb32f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -87,6 +87,10 @@ MODULE_FIRMWARE("radeon/CYPRESS_rlc.bin"); MODULE_FIRMWARE("radeon/PALM_pfp.bin"); MODULE_FIRMWARE("radeon/PALM_me.bin"); MODULE_FIRMWARE("radeon/SUMO_rlc.bin"); +MODULE_FIRMWARE("radeon/SUMO_pfp.bin"); +MODULE_FIRMWARE("radeon/SUMO_me.bin"); +MODULE_FIRMWARE("radeon/SUMO2_pfp.bin"); +MODULE_FIRMWARE("radeon/SUMO2_me.bin"); int r600_debugfs_mc_info_init(struct radeon_device *rdev); @@ -586,6 +590,9 @@ void r600_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if ((voltage->type == VOLTAGE_SW) && voltage->voltage) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage != rdev->pm.current_vddc) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; @@ -2024,6 +2031,14 @@ int r600_init_microcode(struct radeon_device *rdev) chip_name = "PALM"; rlc_chip_name = "SUMO"; break; + case CHIP_SUMO: + chip_name = "SUMO"; + rlc_chip_name = "SUMO"; + break; + case CHIP_SUMO2: + chip_name = "SUMO2"; + rlc_chip_name = "SUMO"; + break; default: BUG(); } @@ -2613,6 +2628,7 @@ void r600_fini(struct radeon_device *rdev) r600_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); r600_pcie_gart_fini(rdev); radeon_agp_fini(rdev); @@ -3282,27 +3298,26 @@ static inline u32 r600_get_ih_wptr(struct radeon_device *rdev) int r600_irq_process(struct radeon_device *rdev) { - u32 wptr = r600_get_ih_wptr(rdev); - u32 rptr = rdev->ih.rptr; + u32 wptr; + u32 rptr; u32 src_id, src_data; u32 ring_index; unsigned long flags; bool queue_hotplug = false; - DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); - if (!rdev->ih.enabled) + if (!rdev->ih.enabled || rdev->shutdown) return IRQ_NONE; + wptr = r600_get_ih_wptr(rdev); + rptr = rdev->ih.rptr; + DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); + spin_lock_irqsave(&rdev->ih.lock, flags); if (rptr == wptr) { spin_unlock_irqrestore(&rdev->ih.lock, flags); return IRQ_NONE; } - if (rdev->shutdown) { - spin_unlock_irqrestore(&rdev->ih.lock, flags); - return IRQ_NONE; - } restart_ih: /* display interrupts */ @@ -3432,7 +3447,7 @@ restart_ih: radeon_fence_process(rdev); break; case 233: /* GUI IDLE */ - DRM_DEBUG("IH: CP EOP\n"); + DRM_DEBUG("IH: GUI idle\n"); rdev->pm.gui_idle = true; wake_up(&rdev->irq.idle_queue); break; diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index fd18be9871ab..909bda8dd550 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -71,20 +71,21 @@ struct r600_cs_track { u64 db_bo_mc; }; -#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc } -#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc } -#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0 } -#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc } -#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0 } -#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc } -#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0 } -#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16, vc } +#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc, CHIP_R600 } +#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc, CHIP_R600 } +#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0, CHIP_R600 } +#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc, CHIP_R600 } +#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0, CHIP_R600 } +#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc, CHIP_R600 } +#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0, CHIP_R600 } +#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16,vc, CHIP_R600 } struct gpu_formats { unsigned blockwidth; unsigned blockheight; unsigned blocksize; unsigned valid_color; + enum radeon_family min_family; }; static const struct gpu_formats color_formats_table[] = { @@ -154,7 +155,11 @@ static const struct gpu_formats color_formats_table[] = { [V_038004_FMT_BC3] = { 4, 4, 16, 0 }, [V_038004_FMT_BC4] = { 4, 4, 8, 0 }, [V_038004_FMT_BC5] = { 4, 4, 16, 0}, + [V_038004_FMT_BC6] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */ + [V_038004_FMT_BC7] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */ + /* The other Evergreen formats */ + [V_038004_FMT_32_AS_32_32_32_32] = { 1, 1, 4, 0, CHIP_CEDAR}, }; static inline bool fmt_is_valid_color(u32 format) @@ -168,11 +173,14 @@ static inline bool fmt_is_valid_color(u32 format) return false; } -static inline bool fmt_is_valid_texture(u32 format) +static inline bool fmt_is_valid_texture(u32 format, enum radeon_family family) { if (format >= ARRAY_SIZE(color_formats_table)) return false; + if (family < color_formats_table[format].min_family) + return false; + if (color_formats_table[format].blockwidth > 0) return true; @@ -1325,7 +1333,7 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p, u32 i return -EINVAL; } format = G_038004_DATA_FORMAT(word1); - if (!fmt_is_valid_texture(format)) { + if (!fmt_is_valid_texture(format, p->family)) { dev_warn(p->dev, "%s:%d texture invalid format %d\n", __func__, __LINE__, format); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index b2b944bcd05a..0245ae6c204e 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -536,7 +536,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 @@ -1309,6 +1309,9 @@ #define V_038004_FMT_BC3 0x00000033 #define V_038004_FMT_BC4 0x00000034 #define V_038004_FMT_BC5 0x00000035 +#define V_038004_FMT_BC6 0x00000036 +#define V_038004_FMT_BC7 0x00000037 +#define V_038004_FMT_32_AS_32_32_32_32 0x00000038 #define R_038010_SQ_TEX_RESOURCE_WORD4_0 0x038010 #define S_038010_FORMAT_COMP_X(x) (((x) & 0x3) << 0) #define G_038010_FORMAT_COMP_X(x) (((x) >> 0) & 0x3) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ba643b576054..ef0e0e016914 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -165,6 +165,7 @@ struct radeon_clock { uint32_t default_sclk; uint32_t default_dispclk; uint32_t dp_extclk; + uint32_t max_pixel_clock; }; /* @@ -178,6 +179,7 @@ void radeon_pm_resume(struct radeon_device *rdev); void radeon_combios_get_power_modes(struct radeon_device *rdev); void radeon_atombios_get_power_modes(struct radeon_device *rdev); void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type); +int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage); void rs690_pm_info(struct radeon_device *rdev); extern int rv6xx_get_temp(struct radeon_device *rdev); extern int rv770_get_temp(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index d948265db87e..b2449629537d 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -906,9 +906,9 @@ static struct radeon_asic cayman_asic = { .get_vblank_counter = &evergreen_get_vblank_counter, .fence_ring_emit = &r600_fence_ring_emit, .cs_parse = &evergreen_cs_parse, - .copy_blit = NULL, - .copy_dma = NULL, - .copy = NULL, + .copy_blit = &evergreen_copy_blit, + .copy_dma = &evergreen_copy_blit, + .copy = &evergreen_copy_blit, .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, .get_memory_clock = &radeon_atom_get_memory_clock, @@ -938,6 +938,13 @@ static struct radeon_asic cayman_asic = { int radeon_asic_init(struct radeon_device *rdev) { radeon_register_accessor_init(rdev); + + /* set the number of crtcs */ + if (rdev->flags & RADEON_SINGLE_CRTC) + rdev->num_crtc = 1; + else + rdev->num_crtc = 2; + switch (rdev->family) { case CHIP_R100: case CHIP_RV100: @@ -1017,18 +1024,32 @@ int radeon_asic_init(struct radeon_device *rdev) case CHIP_JUNIPER: case CHIP_CYPRESS: case CHIP_HEMLOCK: + /* set num crtcs */ + if (rdev->family == CHIP_CEDAR) + rdev->num_crtc = 4; + else + rdev->num_crtc = 6; rdev->asic = &evergreen_asic; break; case CHIP_PALM: + case CHIP_SUMO: + case CHIP_SUMO2: rdev->asic = &sumo_asic; break; case CHIP_BARTS: case CHIP_TURKS: case CHIP_CAICOS: + /* set num crtcs */ + if (rdev->family == CHIP_CAICOS) + rdev->num_crtc = 4; + else + rdev->num_crtc = 6; rdev->asic = &btc_asic; break; case CHIP_CAYMAN: rdev->asic = &cayman_asic; + /* set num crtcs */ + rdev->num_crtc = 6; break; default: /* FIXME: not supported yet */ @@ -1040,18 +1061,6 @@ int radeon_asic_init(struct radeon_device *rdev) rdev->asic->set_memory_clock = NULL; } - /* set the number of crtcs */ - if (rdev->flags & RADEON_SINGLE_CRTC) - rdev->num_crtc = 1; - else { - if (ASIC_IS_DCE41(rdev)) - rdev->num_crtc = 2; - else if (ASIC_IS_DCE4(rdev)) - rdev->num_crtc = 6; - else - rdev->num_crtc = 2; - } - return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 90dfb2b8cf03..bf2b61584cdb 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1246,6 +1246,10 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) } *dcpll = *p1pll; + rdev->clock.max_pixel_clock = le16_to_cpu(firmware_info->info.usMaxPixelClock); + if (rdev->clock.max_pixel_clock == 0) + rdev->clock.max_pixel_clock = 40000; + return true; } @@ -2316,6 +2320,14 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev, le16_to_cpu(clock_info->r600.usVDDC); } + /* patch up vddc if necessary */ + if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) { + u16 vddc; + + if (radeon_atom_get_max_vddc(rdev, &vddc) == 0) + rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc; + } + if (rdev->flags & RADEON_IS_IGP) { /* skip invalid modes */ if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0) @@ -2603,6 +2615,10 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) return; + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage_level == 0xff01) + return; + switch (crev) { case 1: args.v1.ucVoltageType = voltage_type; @@ -2622,7 +2638,35 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +int radeon_atom_get_max_vddc(struct radeon_device *rdev, + u16 *voltage) +{ + union set_voltage args; + int index = GetIndexIntoMasterTable(COMMAND, SetVoltage); + u8 frev, crev; + + if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) + return -EINVAL; + switch (crev) { + case 1: + return -EINVAL; + case 2: + args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE; + args.v2.ucVoltageMode = 0; + args.v2.usVoltageLevel = 0; + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + + *voltage = le16_to_cpu(args.v2.usVoltageLevel); + break; + default: + DRM_ERROR("Unknown table version %d, %d\n", frev, crev); + return -EINVAL; + } + + return 0; +} void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev) { diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 1aba85cad1a8..229a20f10e2b 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -104,7 +104,7 @@ static bool radeon_read_bios(struct radeon_device *rdev) static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; - int size = 64 * 1024; + int size = 256 * 1024; int i; if (!radeon_atrm_supported(rdev->pdev)) @@ -331,7 +331,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1); viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + bus_cntl = RREG32(RV370_BUS_CNTL); d1vga_control = RREG32(AVIVO_D1VGA_CONTROL); d2vga_control = RREG32(AVIVO_D2VGA_CONTROL); vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL); @@ -350,7 +350,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM)); /* Disable VGA mode */ WREG32(AVIVO_D1VGA_CONTROL, @@ -367,7 +367,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) /* restore regs */ WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1); WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + WREG32(RV370_BUS_CNTL, bus_cntl); WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); @@ -390,7 +390,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1); viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + if (rdev->flags & RADEON_IS_PCIE) + bus_cntl = RREG32(RV370_BUS_CNTL); + else + bus_cntl = RREG32(RADEON_BUS_CNTL); crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL); crtc2_gen_cntl = 0; crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); @@ -412,7 +415,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + if (rdev->flags & RADEON_IS_PCIE) + WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM)); + else + WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); /* Turn off mem requests and CRTC for both controllers */ WREG32(RADEON_CRTC_GEN_CNTL, @@ -439,7 +445,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) /* restore regs */ WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1); WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + if (rdev->flags & RADEON_IS_PCIE) + WREG32(RV370_BUS_CNTL, bus_cntl); + else + WREG32(RADEON_BUS_CNTL, bus_cntl); WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl); if (!(rdev->flags & RADEON_SINGLE_CRTC)) { WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index 5249af8931e6..2d48e7a1474b 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -117,7 +117,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev) p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff; if (p1pll->reference_div < 2) p1pll->reference_div = 12; - p2pll->reference_div = p1pll->reference_div; + p2pll->reference_div = p1pll->reference_div; /* These aren't in the device-tree */ if (rdev->family >= CHIP_R420) { @@ -139,6 +139,8 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev) p2pll->pll_out_min = 12500; p2pll->pll_out_max = 35000; } + /* not sure what the max should be in all cases */ + rdev->clock.max_pixel_clock = 35000; spll->reference_freq = mpll->reference_freq = p1pll->reference_freq; spll->reference_div = mpll->reference_div = @@ -151,7 +153,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev) else rdev->clock.default_sclk = radeon_legacy_get_engine_clock(rdev); - + val = of_get_property(dp, "ATY,MCLK", NULL); if (val && *val) rdev->clock.default_mclk = (*val) / 10; @@ -160,7 +162,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev) radeon_legacy_get_memory_clock(rdev); DRM_INFO("Using device-tree clock info\n"); - + return true; } #else diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 5b991f7c6e2a..e4594676a07c 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -866,6 +866,11 @@ bool radeon_combios_get_clock_info(struct drm_device *dev) rdev->clock.default_sclk = sclk; rdev->clock.default_mclk = mclk; + if (RBIOS32(pll_info + 0x16)) + rdev->clock.max_pixel_clock = RBIOS32(pll_info + 0x16); + else + rdev->clock.max_pixel_clock = 35000; /* might need something asic specific */ + return true; } return false; @@ -1548,10 +1553,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) (rdev->pdev->subsystem_device == 0x4a48)) { /* Mac X800 */ rdev->mode_info.connector_table = CT_MAC_X800; - } else if ((rdev->pdev->device == 0x4150) && + } else if ((of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3")) && + (rdev->pdev->device == 0x4150) && (rdev->pdev->subsystem_vendor == 0x1002) && (rdev->pdev->subsystem_device == 0x4150)) { - /* Mac G5 9600 */ + /* Mac G5 tower 9600 */ rdev->mode_info.connector_table = CT_MAC_G5_9600; } else #endif /* CONFIG_PPC_PMAC */ diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index ee1dccb3fec9..9792d4ffdc86 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -44,12 +44,20 @@ extern void radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder, struct drm_connector *drm_connector); +bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector); + void radeon_connector_hotplug(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); + /* bail if the connector does not have hpd pin, e.g., + * VGA, TV, etc. + */ + if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) + return; + radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd); /* powering up/down the eDP panel generates hpd events which @@ -626,8 +634,14 @@ static int radeon_vga_get_modes(struct drm_connector *connector) static int radeon_vga_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_device *dev = connector->dev; + struct radeon_device *rdev = dev->dev_private; + /* XXX check mode bandwidth */ - /* XXX verify against max DAC output frequency */ + + if ((mode->clock / 10) > rdev->clock.max_pixel_clock) + return MODE_CLOCK_HIGH; + return MODE_OK; } @@ -830,6 +844,13 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) if (!radeon_connector->edid) { DRM_ERROR("%s: probed a monitor but no|invalid EDID\n", drm_get_connector_name(connector)); + /* rs690 seems to have a problem with connectors not existing and always + * return a block of 0's. If we see this just stop polling on this output */ + if ((rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) && radeon_connector->base.null_edid_counter) { + ret = connector_status_disconnected; + DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector)); + radeon_connector->ddc_bus = NULL; + } } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -1015,6 +1036,11 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector, } else return MODE_CLOCK_HIGH; } + + /* check against the max pixel clock */ + if ((mode->clock / 10) > rdev->clock.max_pixel_clock) + return MODE_CLOCK_HIGH; + return MODE_OK; } @@ -1052,10 +1078,11 @@ static int radeon_dp_get_modes(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); int ret; - if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { - struct drm_encoder *encoder; + if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) || + (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) { struct drm_display_mode *mode; if (!radeon_dig_connector->edp_on) @@ -1067,7 +1094,6 @@ static int radeon_dp_get_modes(struct drm_connector *connector) ATOM_TRANSMITTER_ACTION_POWER_OFF); if (ret > 0) { - encoder = radeon_best_single_encoder(connector); if (encoder) { radeon_fixup_lvds_native_mode(encoder, connector); /* add scaled modes */ @@ -1091,8 +1117,14 @@ static int radeon_dp_get_modes(struct drm_connector *connector) /* add scaled modes */ radeon_add_common_modes(encoder, connector); } - } else + } else { + /* need to setup ddc on the bridge */ + if (radeon_connector_encoder_is_dp_bridge(connector)) { + if (encoder) + radeon_atom_ext_encoder_setup_ddc(encoder); + } ret = radeon_ddc_get_modes(radeon_connector); + } return ret; } @@ -1176,14 +1208,15 @@ radeon_dp_detect(struct drm_connector *connector, bool force) struct radeon_connector *radeon_connector = to_radeon_connector(connector); enum drm_connector_status ret = connector_status_disconnected; struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); if (radeon_connector->edid) { kfree(radeon_connector->edid); radeon_connector->edid = NULL; } - if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { - struct drm_encoder *encoder = radeon_best_single_encoder(connector); + if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) || + (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) { if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *native_mode = &radeon_encoder->native_mode; @@ -1203,6 +1236,11 @@ radeon_dp_detect(struct drm_connector *connector, bool force) atombios_set_edp_panel_power(connector, ATOM_TRANSMITTER_ACTION_POWER_OFF); } else { + /* need to setup ddc on the bridge */ + if (radeon_connector_encoder_is_dp_bridge(connector)) { + if (encoder) + radeon_atom_ext_encoder_setup_ddc(encoder); + } radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector); if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) { ret = connector_status_connected; @@ -1217,6 +1255,16 @@ radeon_dp_detect(struct drm_connector *connector, bool force) ret = connector_status_connected; } } + + if ((ret == connector_status_disconnected) && + radeon_connector->dac_load_detect) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + struct drm_encoder_helper_funcs *encoder_funcs; + if (encoder) { + encoder_funcs = encoder->helper_private; + ret = encoder_funcs->detect(encoder, connector); + } + } } radeon_connector_update_scratch_regs(connector, ret); @@ -1231,7 +1279,8 @@ static int radeon_dp_mode_valid(struct drm_connector *connector, /* XXX check mode bandwidth */ - if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) || + (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) { struct drm_encoder *encoder = radeon_best_single_encoder(connector); if ((mode->hdisplay < 320) || (mode->vdisplay < 240)) @@ -1241,7 +1290,7 @@ static int radeon_dp_mode_valid(struct drm_connector *connector, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - /* AVIVO hardware supports downscaling modes larger than the panel + /* AVIVO hardware supports downscaling modes larger than the panel * to the panel size, but I'm not sure this is desirable. */ if ((mode->hdisplay > native_mode->hdisplay) || @@ -1390,6 +1439,10 @@ radeon_add_atom_connector(struct drm_device *dev, default: connector->interlace_allowed = true; connector->doublescan_allowed = true; + radeon_connector->dac_load_detect = true; + drm_connector_attach_property(&radeon_connector->base, + rdev->mode_info.load_detect_property, + 1); break; case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_DVID: @@ -1411,6 +1464,12 @@ radeon_add_atom_connector(struct drm_device *dev, connector->doublescan_allowed = true; else connector->doublescan_allowed = false; + if (connector_type == DRM_MODE_CONNECTOR_DVII) { + radeon_connector->dac_load_detect = true; + drm_connector_attach_property(&radeon_connector->base, + rdev->mode_info.load_detect_property, + 1); + } break; case DRM_MODE_CONNECTOR_LVDS: case DRM_MODE_CONNECTOR_eDP: diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 8c1916941871..fae00c0d75aa 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -228,6 +228,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) parser.filp = filp; parser.rdev = rdev; parser.dev = rdev->dev; + parser.family = rdev->family; r = radeon_cs_parser_init(&parser, data); if (r) { DRM_ERROR("Failed to initialize parser !\n"); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 5b61364e31f4..7cfaa7e2f3b5 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -82,6 +82,8 @@ static const char radeon_family_name[][16] = { "CYPRESS", "HEMLOCK", "PALM", + "SUMO", + "SUMO2", "BARTS", "TURKS", "CAICOS", @@ -213,6 +215,8 @@ int radeon_wb_init(struct radeon_device *rdev) return r; } + /* clear wb memory */ + memset((char *)rdev->wb.wb, 0, RADEON_GPU_PAGE_SIZE); /* disable event_write fences */ rdev->wb.use_event = false; /* disabled via module param */ @@ -752,6 +756,7 @@ int radeon_device_init(struct radeon_device *rdev, dma_bits = rdev->need_dma32 ? 32 : 40; r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits)); if (r) { + rdev->need_dma32 = true; printk(KERN_WARNING "radeon: No suitable DMA available.\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index ae247eec87c0..292f73f0ddbd 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -264,6 +264,8 @@ static void radeon_unpin_work_func(struct work_struct *__work) radeon_bo_unreserve(work->old_rbo); } else DRM_ERROR("failed to reserve buffer after flip\n"); + + drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base); kfree(work); } @@ -371,6 +373,8 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, new_radeon_fb = to_radeon_framebuffer(fb); /* schedule unpin of the old buffer */ obj = old_radeon_fb->obj; + /* take a reference to the old object */ + drm_gem_object_reference(obj); rbo = gem_to_radeon_bo(obj); work->old_rbo = rbo; INIT_WORK(&work->work, radeon_unpin_work_func); @@ -378,12 +382,9 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (radeon_crtc->unpin_work) { - spin_unlock_irqrestore(&dev->event_lock, flags); - kfree(work); - radeon_fence_unref(&fence); - DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); - return -EBUSY; + r = -EBUSY; + goto unlock_free; } radeon_crtc->unpin_work = work; radeon_crtc->deferred_flip_completion = 0; @@ -497,6 +498,8 @@ pflip_cleanup1: pflip_cleanup: spin_lock_irqsave(&dev->event_lock, flags); radeon_crtc->unpin_work = NULL; +unlock_free: + drm_gem_object_unreference_unlocked(old_radeon_fb->obj); spin_unlock_irqrestore(&dev->event_lock, flags); radeon_fence_unref(&fence); kfree(work); diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 1d330606292f..73dfbe8e5f9e 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -113,7 +113,7 @@ int radeon_benchmarking = 0; int radeon_testing = 0; int radeon_connector_table = 0; int radeon_tv = 1; -int radeon_audio = 1; +int radeon_audio = 0; int radeon_disp_priority = 0; int radeon_hw_i2c = 0; int radeon_pcie_gen2 = 0; @@ -151,7 +151,7 @@ module_param_named(connector_table, radeon_connector_table, int, 0444); MODULE_PARM_DESC(tv, "TV enable (0 = disable)"); module_param_named(tv, radeon_tv, int, 0444); -MODULE_PARM_DESC(audio, "Audio enable (0 = disable)"); +MODULE_PARM_DESC(audio, "Audio enable (1 = enable)"); module_param_named(audio, radeon_audio, int, 0444); MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal, 2 = high)"); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 1b557554696e..b293487e5aa3 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -367,7 +367,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, } if (ASIC_IS_DCE3(rdev) && - (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT))) { + ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) || + radeon_encoder_is_dp_bridge(encoder))) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); radeon_dp_set_link_config(connector, mode); } @@ -660,21 +661,16 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) if (radeon_encoder_is_dp_bridge(encoder)) return ATOM_ENCODER_MODE_DP; + /* DVO is always DVO */ + if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO) + return ATOM_ENCODER_MODE_DVO; + connector = radeon_get_connector_for_encoder(encoder); - if (!connector) { - switch (radeon_encoder->encoder_id) { - case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: - case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: - case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: - return ATOM_ENCODER_MODE_DVI; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2: - default: - return ATOM_ENCODER_MODE_CRT; - } - } + /* if we don't have an active device yet, just use one of + * the connectors tied to the encoder. + */ + if (!connector) + connector = radeon_get_connector_for_encoder_init(encoder); radeon_connector = to_radeon_connector(connector); switch (connector->connector_type) { @@ -954,10 +950,15 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t int dp_lane_count = 0; int connector_object_id = 0; int igp_lane_info = 0; + int dig_encoder = dig->dig_encoder; - if (action == ATOM_TRANSMITTER_ACTION_INIT) + if (action == ATOM_TRANSMITTER_ACTION_INIT) { connector = radeon_get_connector_for_encoder_init(encoder); - else + /* just needed to avoid bailing in the encoder check. the encoder + * isn't used for init + */ + dig_encoder = 0; + } else connector = radeon_get_connector_for_encoder(encoder); if (connector) { @@ -973,7 +974,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t } /* no dig encoder assigned */ - if (dig->dig_encoder == -1) + if (dig_encoder == -1) return; if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) @@ -1023,7 +1024,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t if (dig->linkb) args.v3.acConfig.ucLinkSel = 1; - if (dig->dig_encoder & 1) + if (dig_encoder & 1) args.v3.acConfig.ucEncoderSel = 1; /* Select the PLL for the PHY @@ -1073,7 +1074,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t args.v3.acConfig.fDualLinkConnector = 1; } } else if (ASIC_IS_DCE32(rdev)) { - args.v2.acConfig.ucEncoderSel = dig->dig_encoder; + args.v2.acConfig.ucEncoderSel = dig_encoder; if (dig->linkb) args.v2.acConfig.ucLinkSel = 1; @@ -1089,9 +1090,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t break; } - if (is_dp) + if (is_dp) { args.v2.acConfig.fCoherentMode = 1; - else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) { + args.v2.acConfig.fDPConnector = 1; + } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) { if (dig->coherent_mode) args.v2.acConfig.fCoherentMode = 1; if (radeon_encoder->pixel_clock > 165000) @@ -1100,7 +1102,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - if (dig->dig_encoder) + if (dig_encoder) args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; else args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER; @@ -1430,7 +1432,11 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) if (is_dig) { switch (mode) { case DRM_MODE_DPMS_ON: - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); + /* some early dce3.2 boards have a bug in their transmitter control table */ + if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730)) + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); + else + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); @@ -1521,26 +1527,29 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) } if (ext_encoder) { - int action; - switch (mode) { case DRM_MODE_DPMS_ON: default: - if (ASIC_IS_DCE41(rdev)) - action = EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT; - else - action = ATOM_ENABLE; + if (ASIC_IS_DCE41(rdev)) { + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT); + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF); + } else + atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (ASIC_IS_DCE41(rdev)) - action = EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT; - else - action = ATOM_DISABLE; + if (ASIC_IS_DCE41(rdev)) { + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING); + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT); + } else + atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE); break; } - atombios_external_encoder_setup(encoder, ext_encoder, action); } radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false); @@ -1999,6 +2008,65 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec return connector_status_disconnected; } +static enum drm_connector_status +radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder); + u32 bios_0_scratch; + + if (!ASIC_IS_DCE4(rdev)) + return connector_status_unknown; + + if (!ext_encoder) + return connector_status_unknown; + + if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0) + return connector_status_unknown; + + /* load detect on the dp bridge */ + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION); + + bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH); + + DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices); + if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) { + if (bios_0_scratch & ATOM_S0_CRT1_MASK) + return connector_status_connected; + } + if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) { + if (bios_0_scratch & ATOM_S0_CRT2_MASK) + return connector_status_connected; + } + if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) { + if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A)) + return connector_status_connected; + } + if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) { + if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A)) + return connector_status_connected; /* CTV */ + else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A)) + return connector_status_connected; /* STV */ + } + return connector_status_disconnected; +} + +void +radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder) +{ + struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder); + + if (ext_encoder) + /* ddc_setup on the dp bridge */ + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP); + +} + static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -2162,7 +2230,7 @@ static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = { .mode_set = radeon_atom_encoder_mode_set, .commit = radeon_atom_encoder_commit, .disable = radeon_atom_encoder_disable, - /* no detect for TMDS/LVDS yet */ + .detect = radeon_atom_dig_detect, }; static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = { diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h index 6f1d9e563e77..ec2f1ea84f81 100644 --- a/drivers/gpu/drm/radeon/radeon_family.h +++ b/drivers/gpu/drm/radeon/radeon_family.h @@ -81,6 +81,8 @@ enum radeon_family { CHIP_CYPRESS, CHIP_HEMLOCK, CHIP_PALM, + CHIP_SUMO, + CHIP_SUMO2, CHIP_BARTS, CHIP_TURKS, CHIP_CAICOS, diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 1f8229436570..021d2b6b556f 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -40,6 +40,35 @@ #include "radeon.h" #include "radeon_trace.h" +static void radeon_fence_write(struct radeon_device *rdev, u32 seq) +{ + if (rdev->wb.enabled) { + u32 scratch_index; + if (rdev->wb.use_event) + scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; + else + scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; + rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);; + } else + WREG32(rdev->fence_drv.scratch_reg, seq); +} + +static u32 radeon_fence_read(struct radeon_device *rdev) +{ + u32 seq; + + if (rdev->wb.enabled) { + u32 scratch_index; + if (rdev->wb.use_event) + scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; + else + scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; + seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]); + } else + seq = RREG32(rdev->fence_drv.scratch_reg); + return seq; +} + int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence) { unsigned long irq_flags; @@ -50,12 +79,12 @@ int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence) return 0; } fence->seq = atomic_add_return(1, &rdev->fence_drv.seq); - if (!rdev->cp.ready) { + if (!rdev->cp.ready) /* FIXME: cp is not running assume everythings is done right * away */ - WREG32(rdev->fence_drv.scratch_reg, fence->seq); - } else + radeon_fence_write(rdev, fence->seq); + else radeon_fence_ring_emit(rdev, fence); trace_radeon_fence_emit(rdev->ddev, fence->seq); @@ -73,15 +102,7 @@ static bool radeon_fence_poll_locked(struct radeon_device *rdev) bool wake = false; unsigned long cjiffies; - if (rdev->wb.enabled) { - u32 scratch_index; - if (rdev->wb.use_event) - scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; - else - scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base; - seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]); - } else - seq = RREG32(rdev->fence_drv.scratch_reg); + seq = radeon_fence_read(rdev); if (seq != rdev->fence_drv.last_seq) { rdev->fence_drv.last_seq = seq; rdev->fence_drv.last_jiffies = jiffies; @@ -251,7 +272,7 @@ retry: r = radeon_gpu_reset(rdev); if (r) return r; - WREG32(rdev->fence_drv.scratch_reg, fence->seq); + radeon_fence_write(rdev, fence->seq); rdev->gpu_lockup = false; } timeout = RADEON_FENCE_JIFFIES_TIMEOUT; @@ -351,7 +372,7 @@ int radeon_fence_driver_init(struct radeon_device *rdev) write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); return r; } - WREG32(rdev->fence_drv.scratch_reg, 0); + radeon_fence_write(rdev, 0); atomic_set(&rdev->fence_drv.seq, 0); INIT_LIST_HEAD(&rdev->fence_drv.created); INIT_LIST_HEAD(&rdev->fence_drv.emited); @@ -391,7 +412,7 @@ static int radeon_debugfs_fence_info(struct seq_file *m, void *data) struct radeon_fence *fence; seq_printf(m, "Last signaled fence 0x%08X\n", - RREG32(rdev->fence_drv.scratch_reg)); + radeon_fence_read(rdev)); if (!list_empty(&rdev->fence_drv.emited)) { fence = list_entry(rdev->fence_drv.emited.prev, struct radeon_fence, list); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 977a341266b6..6df4e3cec0c2 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -483,6 +483,8 @@ extern void radeon_atom_encoder_init(struct radeon_device *rdev); extern void atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t lane_num, uint8_t lane_set); +extern void radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder); +extern struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder); extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, u8 write_byte, u8 *read_byte); diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 86eda1ea94df..aaa19dc418a0 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -487,6 +487,7 @@ static int radeon_hwmon_init(struct radeon_device *rdev) case THERMAL_TYPE_RV6XX: case THERMAL_TYPE_RV770: case THERMAL_TYPE_EVERGREEN: + case THERMAL_TYPE_NI: case THERMAL_TYPE_SUMO: rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev); if (IS_ERR(rdev->pm.int_hwmon_dev)) { diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index ec93a75369e6..bc44a3d35ec6 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -300,6 +300,8 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +#define RV370_BUS_CNTL 0x004c +# define RV370_BUS_BIOS_DIS_ROM (1 << 2) /* rv370/rv380, rv410, r423/r430/r480, r5xx */ #define RADEON_MSI_REARM_EN 0x0160 # define RV370_MSI_REARM_EN (1 << 0) diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index 92f1900dc7ca..ea49752ee99c 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -758,6 +758,5 @@ r600 0x9400 0x00009714 VC_ENHANCE 0x00009830 DB_DEBUG 0x00009838 DB_WATERMARKS -0x00028D28 DB_SRESULTS_COMPARE_STATE0 0x00028D44 DB_ALPHA_TO_MASK 0x00009700 VC_CNTL diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 6e3b11e5abbe..1f5850e473cc 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -426,7 +426,7 @@ int rs600_gart_init(struct radeon_device *rdev) return radeon_gart_table_vram_alloc(rdev); } -int rs600_gart_enable(struct radeon_device *rdev) +static int rs600_gart_enable(struct radeon_device *rdev) { u32 tmp; int r, i; @@ -440,8 +440,8 @@ int rs600_gart_enable(struct radeon_device *rdev) return r; radeon_gart_restore(rdev); /* Enable bus master */ - tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS; - WREG32(R_00004C_BUS_CNTL, tmp); + tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS; + WREG32(RADEON_BUS_CNTL, tmp); /* FIXME: setup default page */ WREG32_MC(R_000100_MC_PT0_CNTL, (S_000100_EFFECTIVE_L2_CACHE_SIZE(6) | diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ef8a5babe9f7..4de51891aa6d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -105,6 +105,9 @@ void rv770_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if ((voltage->type == VOLTAGE_SW) && voltage->voltage) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage != rdev->pm.current_vddc) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; @@ -572,6 +575,12 @@ static void rv770_program_channel_remap(struct radeon_device *rdev) else tcp_chan_steer = 0x00fac688; + /* RV770 CE has special chremap setup */ + if (rdev->pdev->device == 0x944e) { + tcp_chan_steer = 0x00b08b08; + mc_shared_chremap = 0x00b08b08; + } + WREG32(TCP_CHAN_STEER, tcp_chan_steer); WREG32(MC_SHARED_CHREMAP, mc_shared_chremap); } @@ -1359,6 +1368,7 @@ void rv770_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); rv770_vram_scratch_fini(rdev); diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c index bf5f83ea14fe..cb1ee4e0050a 100644 --- a/drivers/gpu/drm/savage/savage_bci.c +++ b/drivers/gpu/drm/savage/savage_bci.c @@ -647,9 +647,6 @@ int savage_driver_firstopen(struct drm_device *dev) ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE, _DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING, &dev_priv->aperture); - if (ret) - return ret; - return ret; } diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 90e23e0bfadb..58c271ebc0f7 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -31,6 +31,7 @@ #include <linux/sched.h> #include <linux/highmem.h> #include <linux/pagemap.h> +#include <linux/shmem_fs.h> #include <linux/file.h> #include <linux/swap.h> #include <linux/slab.h> @@ -484,7 +485,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm) swap_space = swap_storage->f_path.dentry->d_inode->i_mapping; for (i = 0; i < ttm->num_pages; ++i) { - from_page = read_mapping_page(swap_space, i, NULL); + from_page = shmem_read_mapping_page(swap_space, i); if (IS_ERR(from_page)) { ret = PTR_ERR(from_page); goto out_err; @@ -557,7 +558,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) from_page = ttm->pages[i]; if (unlikely(from_page == NULL)) continue; - to_page = read_mapping_page(swap_space, i, NULL); + to_page = shmem_read_mapping_page(swap_space, i); if (unlikely(IS_ERR(to_page))) { ret = PTR_ERR(to_page); goto out_err; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 67d2a7585934..36ca465c00ce 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -305,6 +305,7 @@ config HID_MULTITOUCH - 3M PCT touch screens - ActionStar dual touch panels - Cando dual touch panels + - Chunghwa panels - CVTouch panels - Cypress TrueTouch panels - Elo TouchSystems IntelliTouch Plus panels diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index c957c4b4fe70..6f3289a57888 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1359,6 +1359,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, @@ -1422,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0b374a6d6db0..a756ee6c7df5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -173,6 +173,9 @@ #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d #define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618 +#define USB_VENDOR_ID_CHUNGHWAT 0x2247 +#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001 + #define USB_VENDOR_ID_CIDC 0x1677 #define USB_VENDOR_ID_CMEDIA 0x0d8c @@ -446,6 +449,7 @@ #define USB_VENDOR_ID_LUMIO 0x202e #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 +#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 @@ -622,6 +626,7 @@ #define USB_VENDOR_ID_UCLOGIC 0x5543 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042 #define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001 +#define USB_DEVICE_ID_UCLOGIC_TABLET_TWA60 0x0064 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index a5eda4c8127a..0ec91c18a421 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -501,17 +501,9 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; - /* - * The device reponds with 'invalid report id' when feature - * report switching it into multitouch mode is sent to it. - * - * This results in -EIO from the _raw low-level transport callback, - * but there seems to be no other way of switching the mode. - * Thus the super-ugly hacky success check below. - */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != -EIO) { + if (ret != sizeof(feature)) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index ecd4d2db9e80..62cac4dc3b62 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -64,6 +64,7 @@ struct mt_device { struct mt_class *mtclass; /* our mt device class */ unsigned last_field_index; /* last field index of the report */ unsigned last_slot_field; /* the last field of a slot */ + int last_mt_collection; /* last known mt-related collection */ __s8 inputmode; /* InputMode HID feature, -1 if non-existent */ __u8 num_received; /* how many contacts we received */ __u8 num_expected; /* expected last contact index */ @@ -225,8 +226,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_move); /* touchscreen emulation */ set_abs(hi->input, ABS_X, field, cls->sn_move); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_GD_Y: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -237,8 +240,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_move); /* touchscreen emulation */ set_abs(hi->input, ABS_Y, field, cls->sn_move); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; } return 0; @@ -246,31 +251,42 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_UP_DIGITIZER: switch (usage->hid) { case HID_DG_INRANGE: - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONFIDENCE: - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_TIPSWITCH: hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); input_set_capability(hi->input, EV_KEY, BTN_TOUCH); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONTACTID: + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; input_mt_init_slots(hi->input, td->maxcontacts); td->last_slot_field = usage->hid; td->last_field_index = field->index; + td->last_mt_collection = usage->collection_index; return 1; case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, cls->sn_width); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, @@ -279,8 +295,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_height); input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_TIPPRESSURE: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -292,16 +310,20 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* touchscreen emulation */ set_abs(hi->input, ABS_PRESSURE, field, cls->sn_pressure); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONTACTCOUNT: - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) + td->last_field_index = field->index; return 1; case HID_DG_CONTACTMAX: /* we don't set td->last_slot_field as contactcount and * contact max are global to the report */ - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) + td->last_field_index = field->index; return -1; } /* let hid-input decide for the others */ @@ -516,6 +538,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) } td->mtclass = mtclass; td->inputmode = -1; + td->last_mt_collection = -1; hid_set_drvdata(hdev, td); ret = hid_parse(hdev); @@ -526,9 +549,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; - if (!td->maxcontacts) - td->maxcontacts = MT_DEFAULT_MAXCONTACT; - td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), GFP_KERNEL); if (!td->slots) { @@ -593,6 +613,11 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, + /* Chunghwa Telecom touch panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, + USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, + /* CVTouch panels */ { .driver_data = MT_CLS_DEFAULT, HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, @@ -651,6 +676,9 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, + USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, /* MosArt panels */ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, @@ -681,10 +709,10 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX)}, /* Touch International panels */ diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 0e30b140edca..621959d5cc42 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -74,6 +74,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT }, diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index ff3c644888b1..7c1188b53c3e 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -248,12 +248,15 @@ static int hiddev_release(struct inode * inode, struct file * file) usbhid_close(list->hiddev->hid); usbhid_put_power(list->hiddev->hid); } else { + mutex_unlock(&list->hiddev->existancelock); kfree(list->hiddev); + kfree(list); + return 0; } } - kfree(list); mutex_unlock(&list->hiddev->existancelock); + kfree(list); return 0; } @@ -923,10 +926,11 @@ void hiddev_disconnect(struct hid_device *hid) usb_deregister_dev(usbhid->intf, &hiddev_class); if (hiddev->open) { + mutex_unlock(&hiddev->existancelock); usbhid_close(hiddev->hid); wake_up_interruptible(&hiddev->wait); } else { + mutex_unlock(&hiddev->existancelock); kfree(hiddev); } - mutex_unlock(&hiddev->existancelock); } diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 16db83c83c8b..5f888f7e7dcb 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -333,7 +333,7 @@ config SENSORS_F71882FG F71858FG F71862FG F71863FG - F71869F/E + F71869F/E/A F71882FG F71883FG F71889FG/ED/A diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c index c2ee2048ab91..8bc1bd663721 100644 --- a/drivers/hwmon/adm1275.c +++ b/drivers/hwmon/adm1275.c @@ -32,6 +32,7 @@ static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { int config; + int ret; struct pmbus_driver_info *info; if (!i2c_check_functionality(client->adapter, @@ -43,30 +44,32 @@ static int adm1275_probe(struct i2c_client *client, return -ENOMEM; config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); - if (config < 0) - return config; + if (config < 0) { + ret = config; + goto err_mem; + } info->pages = 1; info->direct[PSC_VOLTAGE_IN] = true; info->direct[PSC_VOLTAGE_OUT] = true; info->direct[PSC_CURRENT_OUT] = true; - info->m[PSC_CURRENT_OUT] = 800; + info->m[PSC_CURRENT_OUT] = 807; info->b[PSC_CURRENT_OUT] = 20475; info->R[PSC_CURRENT_OUT] = -1; info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; if (config & ADM1275_VRANGE) { - info->m[PSC_VOLTAGE_IN] = 19045; + info->m[PSC_VOLTAGE_IN] = 19199; info->b[PSC_VOLTAGE_IN] = 0; info->R[PSC_VOLTAGE_IN] = -2; - info->m[PSC_VOLTAGE_OUT] = 19045; + info->m[PSC_VOLTAGE_OUT] = 19199; info->b[PSC_VOLTAGE_OUT] = 0; info->R[PSC_VOLTAGE_OUT] = -2; } else { - info->m[PSC_VOLTAGE_IN] = 6666; + info->m[PSC_VOLTAGE_IN] = 6720; info->b[PSC_VOLTAGE_IN] = 0; info->R[PSC_VOLTAGE_IN] = -1; - info->m[PSC_VOLTAGE_OUT] = 6666; + info->m[PSC_VOLTAGE_OUT] = 6720; info->b[PSC_VOLTAGE_OUT] = 0; info->R[PSC_VOLTAGE_OUT] = -1; } @@ -76,7 +79,14 @@ static int adm1275_probe(struct i2c_client *client, else info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; - return pmbus_do_probe(client, id, info); + ret = pmbus_do_probe(client, id, info); + if (ret) + goto err_mem; + return 0; + +err_mem: + kfree(info); + return ret; } static int adm1275_remove(struct i2c_client *client) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index b5e892017e0c..dcb78a7a8047 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -268,6 +268,7 @@ static struct device_attribute atk_name_attr = static void atk_init_attribute(struct device_attribute *attr, char *name, sysfs_show_func show) { + sysfs_attr_init(&attr->attr); attr->attr.name = name; attr->attr.mode = 0444; attr->show = show; @@ -1188,19 +1189,15 @@ static int atk_create_files(struct atk_data *data) int err; list_for_each_entry(s, &data->sensor_list, list) { - sysfs_attr_init(&s->input_attr.attr); err = device_create_file(data->hwmon_dev, &s->input_attr); if (err) return err; - sysfs_attr_init(&s->label_attr.attr); err = device_create_file(data->hwmon_dev, &s->label_attr); if (err) return err; - sysfs_attr_init(&s->limit1_attr.attr); err = device_create_file(data->hwmon_dev, &s->limit1_attr); if (err) return err; - sysfs_attr_init(&s->limit2_attr.attr); err = device_create_file(data->hwmon_dev, &s->limit2_attr); if (err) return err; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index de3d2465fe24..0070d5476dd0 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -97,9 +97,7 @@ struct platform_data { struct pdev_entry { struct list_head list; struct platform_device *pdev; - unsigned int cpu; u16 phys_proc_id; - u16 cpu_core_id; }; static LIST_HEAD(pdev_list); @@ -296,7 +294,7 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) * If the TjMax is not plausible, an assumption * will be used */ - if (val > 80 && val < 120) { + if (val) { dev_info(dev, "TjMax is %d C.\n", val); return val * 1000; } @@ -304,24 +302,9 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) /* * An assumption is made for early CPUs and unreadable MSR. - * NOTE: the given value may not be correct. + * NOTE: the calculated value may not be correct. */ - - switch (c->x86_model) { - case 0xe: - case 0xf: - case 0x16: - case 0x1a: - dev_warn(dev, "TjMax is assumed as 100 C!\n"); - return 100000; - case 0x17: - case 0x1c: /* Atom CPUs */ - return adjust_tjmax(c, id, dev); - default: - dev_warn(dev, "CPU (model=0x%x) is not supported yet," - " using default TjMax of 100C.\n", c->x86_model); - return 100000; - } + return adjust_tjmax(c, id, dev); } static void __devinit get_ucode_rev_on_cpu(void *edx) @@ -341,7 +324,7 @@ static int get_pkg_tjmax(unsigned int cpu, struct device *dev) err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); if (!err) { val = (eax >> 16) & 0xff; - if (val > 80 && val < 120) + if (val) return val * 1000; } dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu); @@ -668,9 +651,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) } pdev_entry->pdev = pdev; - pdev_entry->cpu = cpu; pdev_entry->phys_proc_id = TO_PHYS_ID(cpu); - pdev_entry->cpu_core_id = TO_CORE_ID(cpu); list_add_tail(&pdev_entry->list, &pdev_list); mutex_unlock(&pdev_list_mutex); diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c index e0ef32378ac6..0064432f361f 100644 --- a/drivers/hwmon/emc6w201.c +++ b/drivers/hwmon/emc6w201.c @@ -78,8 +78,9 @@ static u16 emc6w201_read16(struct i2c_client *client, u8 reg) lsb = i2c_smbus_read_byte_data(client, reg); msb = i2c_smbus_read_byte_data(client, reg + 1); - if (lsb < 0 || msb < 0) { - dev_err(&client->dev, "16-bit read failed at 0x%02x\n", reg); + if (unlikely(lsb < 0 || msb < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "read", reg); return 0xFFFF; /* Arbitrary value */ } @@ -95,10 +96,39 @@ static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) int err; err = i2c_smbus_write_byte_data(client, reg, val & 0xff); - if (!err) + if (likely(!err)) err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); - if (err < 0) - dev_err(&client->dev, "16-bit write failed at 0x%02x\n", reg); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "write", reg); + + return err; +} + +/* Read 8-bit value from register */ +static u8 emc6w201_read8(struct i2c_client *client, u8 reg) +{ + int val; + + val = i2c_smbus_read_byte_data(client, reg); + if (unlikely(val < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "read", reg); + return 0x00; /* Arbitrary value */ + } + + return val; +} + +/* Write 8-bit value to register */ +static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + + err = i2c_smbus_write_byte_data(client, reg, val); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "write", reg); return err; } @@ -114,25 +144,25 @@ static struct emc6w201_data *emc6w201_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { for (nr = 0; nr < 6; nr++) { data->in[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN(nr)); data->in[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_LOW(nr)); data->in[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_HIGH(nr)); } for (nr = 0; nr < 6; nr++) { data->temp[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP(nr)); data->temp[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_LOW(nr)); data->temp[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_HIGH(nr)); } @@ -192,7 +222,7 @@ static ssize_t set_in(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255); - err = i2c_smbus_write_byte_data(client, reg, data->in[sf][nr]); + err = emc6w201_write8(client, reg, data->in[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -229,7 +259,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128); - err = i2c_smbus_write_byte_data(client, reg, data->temp[sf][nr]); + err = emc6w201_write8(client, reg, data->temp[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -444,7 +474,7 @@ static int emc6w201_detect(struct i2c_client *client, /* Check configuration */ config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); - if ((config & 0xF4) != 0x04) + if (config < 0 || (config & 0xF4) != 0x04) return -ENODEV; if (!(config & 0x01)) { dev_err(&client->dev, "Monitoring not enabled\n"); diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index a4a94a096c90..2d96ed2bf8ed 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -52,6 +52,7 @@ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ +#define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ #define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F71889E_ID 0x0909 /* Chipset ID */ @@ -108,8 +109,8 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg, - f71889ed, f71889a, f8000, f81865f }; +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg, + f71889fg, f71889ed, f71889a, f8000, f81865f }; static const char *f71882fg_names[] = { "f71808e", @@ -117,6 +118,7 @@ static const char *f71882fg_names[] = { "f71858fg", "f71862fg", "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ + "f71869a", "f71882fg", "f71889fg", /* f81801u too, same id */ "f71889ed", @@ -131,6 +133,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = { [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, + [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, @@ -145,6 +148,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71858fg] = 0, [f71862fg] = 0, [f71869] = 0, + [f71869a] = 0, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -159,6 +163,7 @@ static const char f71882fg_fan_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -173,6 +178,7 @@ static const char f71882fg_nr_fans[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 4, [f71889fg] = 3, [f71889ed] = 3, @@ -187,6 +193,7 @@ static const char f71882fg_temp_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -201,6 +208,7 @@ static const char f71882fg_nr_temps[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 3, [f71889fg] = 3, [f71889ed] = 3, @@ -2243,6 +2251,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: /* These always have signed auto point temps */ data->auto_point_temp_signed = 1; /* Fall through to select correct fan/pwm reg bank! */ @@ -2305,6 +2314,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: case f71889fg: case f71889ed: case f71889a: @@ -2528,6 +2538,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, case SIO_F71869_ID: sio_data->type = f71869; break; + case SIO_F71869A_ID: + sio_data->type = f71869a; + break; case SIO_F71882_ID: sio_data->type = f71882fg; break; @@ -2662,7 +2675,7 @@ static void __exit f71882fg_exit(void) } MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL"); module_init(f71882fg_init); diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 2582bfef6ccb..c8195a077da3 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -202,7 +202,7 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */ - {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */ diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 537409d07ee7..1a409c5bc9bc 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -947,6 +947,7 @@ static int aem_register_sensors(struct aem_data *data, /* Set up read-only sensors */ while (ro->label) { + sysfs_attr_init(&sensors->dev_attr.attr); sensors->dev_attr.attr.name = ro->label; sensors->dev_attr.attr.mode = S_IRUGO; sensors->dev_attr.show = ro->show; @@ -963,6 +964,7 @@ static int aem_register_sensors(struct aem_data *data, /* Set up read-write sensors */ while (rw->label) { + sysfs_attr_init(&sensors->dev_attr.attr); sensors->dev_attr.attr.name = rw->label; sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; sensors->dev_attr.show = rw->show; diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c index 06d4eafcf76b..41dbf8161ed7 100644 --- a/drivers/hwmon/ibmpex.c +++ b/drivers/hwmon/ibmpex.c @@ -358,6 +358,7 @@ static int create_sensor(struct ibmpex_bmc_data *data, int type, else if (type == POWER_SENSOR) sprintf(n, power_sensor_name_templates[func], "power", counter); + sysfs_attr_init(&data->sensors[sensor].attr[func].dev_attr.attr); data->sensors[sensor].attr[func].dev_attr.attr.name = n; data->sensors[sensor].attr[func].dev_attr.attr.mode = S_IRUGO; data->sensors[sensor].attr[func].dev_attr.show = ibmpex_show_sensor; diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 1a6dfb6df1e7..d3b464b74ced 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -98,11 +98,16 @@ struct lm95241_data { }; /* Conversions */ -static int TempFromReg(u8 val_h, u8 val_l) +static int temp_from_reg_signed(u8 val_h, u8 val_l) { - if (val_h & 0x80) - return val_h - 0x100; - return val_h * 1000 + val_l * 1000 / 256; + s16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; +} + +static int temp_from_reg_unsigned(u8 val_h, u8 val_l) +{ + u16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; } static struct lm95241_data *lm95241_update_device(struct device *dev) @@ -135,10 +140,13 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr, char *buf) { struct lm95241_data *data = lm95241_update_device(dev); + int index = to_sensor_dev_attr(attr)->index; return snprintf(buf, PAGE_SIZE - 1, "%d\n", - TempFromReg(data->temp[to_sensor_dev_attr(attr)->index], - data->temp[to_sensor_dev_attr(attr)->index + 1])); + index == 0 || (data->config & (1 << (index / 2))) ? + temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : + temp_from_reg_unsigned(data->temp[index], + data->temp[index + 1])); } static ssize_t show_type(struct device *dev, struct device_attribute *attr, @@ -339,7 +347,7 @@ static int lm95241_detect(struct i2c_client *new_client, if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) == MANUFACTURER_ID) && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - >= DEFAULT_REVISION)) { + == DEFAULT_REVISION)) { name = DEVNAME; } else { dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c index 0f9fc40379cd..e855d3b0bd1f 100644 --- a/drivers/hwmon/max6642.c +++ b/drivers/hwmon/max6642.c @@ -136,15 +136,29 @@ static int max6642_detect(struct i2c_client *client, if (man_id != 0x4D) return -ENODEV; + /* sanity check */ + if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D + || i2c_smbus_read_byte_data(client, 0x06) != 0x4D + || i2c_smbus_read_byte_data(client, 0xff) != 0x4D) + return -ENODEV; + /* * We read the config and status register, the 4 lower bits in the * config register should be zero and bit 5, 3, 1 and 0 should be * zero in the status register. */ reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); + if ((reg_config & 0x0f) != 0x00) + return -ENODEV; + + /* in between, another round of sanity checks */ + if (i2c_smbus_read_byte_data(client, 0x04) != reg_config + || i2c_smbus_read_byte_data(client, 0x06) != reg_config + || i2c_smbus_read_byte_data(client, 0xff) != reg_config) + return -ENODEV; + reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); - if (((reg_config & 0x0f) != 0x00) || - ((reg_status & 0x2b) != 0x00)) + if ((reg_status & 0x2b) != 0x00) return -ENODEV; strlcpy(info->type, "max6642", I2C_NAME_SIZE); @@ -246,7 +260,7 @@ static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max, 0, MAX6642_REG_W_LOCAL_HIGH); static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max, 1, MAX6642_REG_W_REMOTE_HIGH); -static SENSOR_DEVICE_ATTR(temp_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); @@ -256,7 +270,7 @@ static struct attribute *max6642_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp_fault.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, NULL diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c index 98e2e28899e2..9b1f0c37ef77 100644 --- a/drivers/hwmon/pmbus.c +++ b/drivers/hwmon/pmbus.c @@ -47,22 +47,29 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, if (info->func[0] && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) info->func[0] |= PMBUS_HAVE_STATUS_INPUT; - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { info->func[0] |= PMBUS_HAVE_FAN12; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) info->func[0] |= PMBUS_HAVE_STATUS_FAN12; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { info->func[0] |= PMBUS_HAVE_FAN34; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) info->func[0] |= PMBUS_HAVE_STATUS_FAN34; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) { + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) info->func[0] |= PMBUS_HAVE_TEMP; - if (pmbus_check_byte_register(client, 0, - PMBUS_STATUS_TEMPERATURE)) + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) info->func[0] |= PMBUS_HAVE_STATUS_TEMP; - } /* Sensors detected on all pages */ for (page = 0; page < info->pages; page++) { diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index 354770ed3186..8e31a8e2c746 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -362,8 +362,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev) * Convert linear sensor values to milli- or micro-units * depending on sensor type. */ -static int pmbus_reg2data_linear(struct pmbus_data *data, - struct pmbus_sensor *sensor) +static long pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) { s16 exponent; s32 mantissa; @@ -397,15 +397,15 @@ static int pmbus_reg2data_linear(struct pmbus_data *data, else val >>= -exponent; - return (int)val; + return val; } /* * Convert direct sensor values to milli- or micro-units * depending on sensor type. */ -static int pmbus_reg2data_direct(struct pmbus_data *data, - struct pmbus_sensor *sensor) +static long pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) { long val = (s16) sensor->data; long m, b, R; @@ -440,12 +440,12 @@ static int pmbus_reg2data_direct(struct pmbus_data *data, R++; } - return (int)((val - b) / m); + return (val - b) / m; } -static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) { - int val; + long val; if (data->info->direct[sensor->class]) val = pmbus_reg2data_direct(data, sensor); @@ -619,7 +619,7 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) if (!s1 && !s2) *val = !!regval; else { - int v1, v2; + long v1, v2; struct pmbus_sensor *sensor1, *sensor2; sensor1 = &data->sensors[s1]; @@ -661,7 +661,7 @@ static ssize_t pmbus_show_sensor(struct device *dev, if (sensor->data < 0) return sensor->data; - return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor)); + return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); } static ssize_t pmbus_set_sensor(struct device *dev, @@ -1430,14 +1430,9 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* - * Bail out if status register or PMBus revision register - * does not exist. - */ - if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0 - || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) { - dev_err(&client->dev, - "Status or revision register not found\n"); + /* Bail out if PMBus status register does not exist. */ + if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) { + dev_err(&client->dev, "PMBus status register not found\n"); ret = -ENODEV; goto out_data; } diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 92b42db43bcf..b39f52e2752a 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -232,6 +232,7 @@ static int s3c_hwmon_create_attr(struct device *dev, attr = &attrs->in; attr->index = channel; + sysfs_attr_init(&attr->dev_attr.attr); attr->dev_attr.attr.name = attrs->in_name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = s3c_hwmon_ch_show; @@ -249,6 +250,7 @@ static int s3c_hwmon_create_attr(struct device *dev, attr = &attrs->label; attr->index = channel; + sysfs_attr_init(&attr->dev_attr.attr); attr->dev_attr.attr.name = attrs->label_name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = s3c_hwmon_label_show; diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 020c87273ea1..3494a4cce414 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -887,7 +887,7 @@ static void __exit sch5627_exit(void) } MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL"); module_init(sch5627_init); diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 52b545a795f2..cbc98aea5b09 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -193,7 +193,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, return; } if (twi_int_status & MCOMP) { - if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + if ((read_MASTER_CTL(iface) & MEN) == 0 && + (iface->cur_mode == TWI_I2C_MODE_REPEAT || + iface->cur_mode == TWI_I2C_MODE_COMBINED)) { + iface->result = -1; + write_INT_MASK(iface, 0); + write_MASTER_CTL(iface, 0); + } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { if (iface->readNum == 0) { /* set the read number to 1 and ask for manual * stop in block combine mode diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 6c00c107ebf3..f84a63c6dd97 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -248,12 +248,12 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c) return i2c->msg_ptr >= i2c->msg->len; } -/* i2s_s3c_irq_nextbyte +/* i2c_s3c_irq_nextbyte * * process an interrupt and work out what to do */ -static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) +static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) { unsigned long tmp; unsigned char byte; @@ -264,7 +264,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_IDLE: dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); goto out; - break; case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); @@ -444,7 +443,7 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ - i2s_s3c_irq_nextbyte(i2c, status); + i2c_s3c_irq_nextbyte(i2c, status); out: return IRQ_HANDLED; diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index dd39c1eb03ed..26c352a09298 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -234,7 +234,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, " + dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, " "pos=%d)\n", taos->state, taos->pos); goto exit_close; } @@ -255,7 +255,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) msecs_to_jiffies(250)); if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_err(&adapter->dev, "Echo off failed " + dev_err(&serio->dev, "TAOS EVM echo off failed " "(state=%d)\n", taos->state); goto exit_close; } @@ -263,7 +263,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) err = i2c_add_adapter(adapter); if (err) goto exit_close; - dev_dbg(&serio->dev, "Connected to TAOS EVM\n"); + dev_info(&serio->dev, "Connected to TAOS EVM\n"); taos->client = taos_instantiate_device(adapter); return 0; @@ -288,7 +288,7 @@ static void taos_disconnect(struct serio *serio) serio_set_drvdata(serio, NULL); kfree(taos); - dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n"); + dev_info(&serio->dev, "Disconnected from TAOS EVM\n"); } static struct serio_device_id taos_serio_ids[] = { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 4d9319665e32..fb3b4f8f8152 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -40,8 +40,10 @@ #define I2C_CNFG_NEW_MASTER_FSM (1<<11) #define I2C_STATUS 0x01C #define I2C_SL_CNFG 0x020 +#define I2C_SL_CNFG_NACK (1<<1) #define I2C_SL_CNFG_NEWSL (1<<2) #define I2C_SL_ADDR1 0x02c +#define I2C_SL_ADDR2 0x030 #define I2C_TX_FIFO 0x050 #define I2C_RX_FIFO 0x054 #define I2C_PACKET_TRANSFER_STATUS 0x058 @@ -337,7 +339,11 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (!i2c_dev->is_dvc) { u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG); - i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG); + sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL; + i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG); + i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1); + i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2); + } val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT | diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 54e1ce73534b..6f8953664636 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -201,10 +201,11 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); - /* Read the mux register at addr to verify - * that the mux is in fact present. + /* Write the mux register at addr to verify + * that the mux is in fact present. This also + * initializes the mux to disconnected state. */ - if (i2c_smbus_read_byte(client) < 0) { + if (i2c_smbus_write_byte(client, 0) < 0) { dev_warn(&client->dev, "probe failed\n"); goto exit_free; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 6e5123b1d341..04b09564bfa9 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -778,7 +778,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { struct ide_cmd cmd; - int uptodate = 0, nsectors; + int uptodate = 0; + unsigned int nsectors; ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu", rq->cmd[0], (unsigned long long)block); @@ -1782,7 +1783,6 @@ static int ide_cd_probe(ide_drive_t *drive) ide_cd_read_toc(drive, &sense); g->fops = &idecd_ops; g->flags |= GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; - g->events = DISK_EVENT_MEDIA_CHANGE; add_disk(g); return 0; diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index f62f52fb9ece..fc0f2bd9ca82 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3641,7 +3641,8 @@ static struct kobj_type cm_port_obj_type = { static char *cm_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e49a85f8a44d..56898b6578a4 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -826,7 +826,8 @@ static void ib_uverbs_remove_one(struct ib_device *device) static char *uverbs_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index f660cd04ec2f..31fb44085c9b 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1463,9 +1463,9 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) struct c4iw_qp_attributes attrs; int disconnect = 1; int release = 0; - int abort = 0; struct tid_info *t = dev->rdev.lldi.tids; unsigned int tid = GET_TID(hdr); + int ret; ep = lookup_tid(t, tid); PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); @@ -1501,10 +1501,12 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) start_ep_timer(ep); __state_set(&ep->com, CLOSING); attrs.next_state = C4IW_QP_STATE_CLOSING; - abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, + ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); - peer_close_upcall(ep); - disconnect = 1; + if (ret != -ECONNRESET) { + peer_close_upcall(ep); + disconnect = 1; + } break; case ABORTING: disconnect = 0; @@ -2109,15 +2111,16 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp) break; } - mutex_unlock(&ep->com.mutex); if (close) { - if (abrupt) - ret = abort_connection(ep, NULL, gfp); - else + if (abrupt) { + close_complete_upcall(ep); + ret = send_abort(ep, NULL, gfp); + } else ret = send_halfclose(ep, gfp); if (ret) fatal = 1; } + mutex_unlock(&ep->com.mutex); if (fatal) release_ep_resources(ep); return ret; @@ -2301,6 +2304,31 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb) return 0; } +static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb) +{ + struct cpl_abort_req_rss *req = cplhdr(skb); + struct c4iw_ep *ep; + struct tid_info *t = dev->rdev.lldi.tids; + unsigned int tid = GET_TID(req); + + ep = lookup_tid(t, tid); + if (is_neg_adv_abort(req->status)) { + PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep, + ep->hwtid); + kfree_skb(skb); + return 0; + } + PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid, + ep->com.state); + + /* + * Wake up any threads in rdma_init() or rdma_fini(). + */ + c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET); + sched(dev, skb); + return 0; +} + /* * Most upcalls from the T4 Core go to sched() to * schedule the processing on a work queue. @@ -2317,7 +2345,7 @@ c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = { [CPL_PASS_ESTABLISH] = sched, [CPL_PEER_CLOSE] = sched, [CPL_CLOSE_CON_RPL] = sched, - [CPL_ABORT_REQ_RSS] = sched, + [CPL_ABORT_REQ_RSS] = peer_abort_intr, [CPL_RDMA_TERMINATE] = sched, [CPL_FW4_ACK] = sched, [CPL_SET_TCB_RPL] = set_tcb_rpl, diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 8d8f8add6fcd..1720dc790d13 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -801,6 +801,10 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries, if (ucontext) { memsize = roundup(memsize, PAGE_SIZE); hwentries = memsize / sizeof *chp->cq.queue; + while (hwentries > T4_MAX_IQ_SIZE) { + memsize -= PAGE_SIZE; + hwentries = memsize / sizeof *chp->cq.queue; + } } chp->cq.size = hwentries; chp->cq.memsize = memsize; diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 273ffe49525a..0347eed4a167 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -625,7 +625,7 @@ pbl_done: mhp->attr.perms = c4iw_ib_to_tpt_access(acc); mhp->attr.va_fbo = virt; mhp->attr.page_size = shift - 12; - mhp->attr.len = (u32) length; + mhp->attr.len = length; err = register_mem(rhp, php, mhp, shift); if (err) diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 3b773b05a898..a41578e48c7b 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1207,11 +1207,8 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp, c4iw_get_ep(&qhp->ep->com); } ret = rdma_fini(rhp, qhp, ep); - if (ret) { - if (internal) - c4iw_get_ep(&qhp->ep->com); + if (ret) goto err; - } break; case C4IW_QP_STATE_TERMINATE: set_state(qhp, C4IW_QP_STATE_TERMINATE); diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 9f53e68a096a..8ec5237031a0 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { #define IB_7322_LT_STATE_RECOVERIDLE 0x0f #define IB_7322_LT_STATE_CFGENH 0x10 #define IB_7322_LT_STATE_CFGTEST 0x11 +#define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 +#define IB_7322_LT_STATE_CFGWAITENH 0x13 /* link state machine states from IBC */ #define IB_7322_L_STATE_DOWN 0x0 @@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = { IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH, + [IB_7322_LT_STATE_CFGWAITRMTTEST] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGWAITENH] = + IB_PHYSPORTSTATE_CFG_WAIT_ENH, [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, @@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) break; } - if (ibclt == IB_7322_LT_STATE_CFGTEST && + if (((ibclt >= IB_7322_LT_STATE_CFGTEST && + ibclt <= IB_7322_LT_STATE_CFGWAITENH) || + ibclt == IB_7322_LT_STATE_LINKUP) && (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { force_h1(ppd); ppd->cpspec->qdr_reforce = 1; @@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) { u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); - printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n", - ppd->dd->unit, ppd->port, (enable ? "on" : "off")); - if (enable) + u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); + + if (enable && !state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n", + ppd->dd->unit, ppd->port); data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); - else + } else if (!enable && state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n", + ppd->dd->unit, ppd->port); data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); + } qib_write_kreg_port(ppd, krp_serdesctrl, data); } diff --git a/drivers/infiniband/hw/qib/qib_intr.c b/drivers/infiniband/hw/qib/qib_intr.c index a693c56ec8a6..6ae57d23004a 100644 --- a/drivers/infiniband/hw/qib/qib_intr.c +++ b/drivers/infiniband/hw/qib/qib_intr.c @@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs) * states, or if it transitions from any of the up (INIT or better) * states into any of the down states (except link recovery), then * call the chip-specific code to take appropriate actions. + * + * ppd->lflags could be 0 if this is the first time the interrupt + * handlers has been called but the link is already up. */ - if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) && + if (lstate >= IB_PORT_INIT && + (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) && ltstate == IB_PHYSPORTSTATE_LINKUP) { /* transitioned to UP */ if (dd->f_ib_updown(ppd, 1, ibcs)) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index be0921ef6b52..4cf25347b015 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -111,7 +111,8 @@ static void evdev_event(struct input_handle *handle, rcu_read_unlock(); - wake_up_interruptible(&evdev->wait); + if (type == EV_SYN && code == SYN_REPORT) + wake_up_interruptible(&evdev->wait); } static int evdev_fasync(int fd, struct file *file, int on) diff --git a/drivers/input/input.c b/drivers/input/input.c index 75e11c7b70fd..da38d97a51b1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1756,7 +1756,7 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, - clamp(mt_slots, 2, 32); + mt_slots = clamp(mt_slots, 2, 32); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { mt_slots = 2; } else { diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index f23a743817db..33d0bdc837c0 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -209,6 +209,7 @@ static void omap_kp_tasklet(unsigned long data) #endif } } + input_sync(omap_kp_data->input); memcpy(keypad_state, new_state, sizeof(keypad_state)); if (key_down) { diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 40b02ae96f86..6229c3e8e78b 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -520,7 +520,8 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); const struct matrix_keymap_data *keymap_data; struct pmic8xxx_kp *kp; int rc; diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 834cf98e7efb..6876700a4469 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -32,7 +32,7 @@ static const struct { [SH_KEYSC_MODE_3] = { 2, 4, 7 }, [SH_KEYSC_MODE_4] = { 3, 6, 6 }, [SH_KEYSC_MODE_5] = { 4, 6, 7 }, - [SH_KEYSC_MODE_6] = { 5, 7, 7 }, + [SH_KEYSC_MODE_6] = { 5, 8, 8 }, }; struct sh_keysc_priv { diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 97e07e786e41..b3cfb9c71e66 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -90,7 +90,8 @@ static int __devinit pmic8xxx_pwrkey_probe(struct platform_device *pdev) unsigned int delay; u8 pon_cntl; struct pmic8xxx_pwrkey *pwrkey; - const struct pm8xxx_pwrkey_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_pwrkey_platform_data *pdata = + dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "power key platform data not supplied\n"); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 257e033986e4..0110b5a3a167 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -187,7 +187,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = xres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.x = ((value - min) * xres) / size; mousedev->packet.abs_event = 1; @@ -201,7 +201,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = yres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.y = yres - ((value - min) * yres) / size; mousedev->packet.abs_event = 1; diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index f3698967edf6..8755f5f3ad37 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -120,21 +120,17 @@ static void serport_ldisc_close(struct tty_struct *tty) * 'interrupt' routine. */ -static unsigned int serport_ldisc_receive(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; unsigned long flags; unsigned int ch_flags; - int ret = 0; int i; spin_lock_irqsave(&serport->lock, flags); - if (!test_bit(SERPORT_ACTIVE, &serport->flags)) { - ret = -EINVAL; + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) goto out; - } for (i = 0; i < count; i++) { switch (fp[i]) { @@ -156,8 +152,6 @@ static unsigned int serport_ldisc_receive(struct tty_struct *tty, out: spin_unlock_irqrestore(&serport->lock, flags); - - return ret == 0 ? count : ret; } /* diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 59de638225fe..e35058bcd7b9 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -156,8 +156,10 @@ static int if_open(struct tty_struct *tty, struct file *filp) if (!cs || !try_module_get(cs->driver->owner)) return -ENODEV; - if (mutex_lock_interruptible(&cs->mutex)) + if (mutex_lock_interruptible(&cs->mutex)) { + module_put(cs->driver->owner); return -ERESTARTSYS; + } tty->driver_data = cs; ++cs->open_count; diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index 1d44d470897c..86a5c4f7775e 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -674,7 +674,7 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file, * cflags buffer containing error flags for received characters (ignored) * count number of received characters */ -static unsigned int +static void gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -683,12 +683,12 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, struct inbuf_t *inbuf; if (!cs) - return -ENODEV; + return; inbuf = cs->inbuf; if (!inbuf) { dev_err(cs->dev, "%s: no inbuf\n", __func__); cs_put(cs); - return -EINVAL; + return; } tail = inbuf->tail; @@ -725,8 +725,6 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, gig_dbg(DEBUG_INTR, "%s-->BH", __func__); gigaset_schedule_event(cs); cs_put(cs); - - return count; } /* diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 3ccbff13eaf2..71a8eb6ef71e 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -283,6 +283,7 @@ hfcsusb_ph_info(struct hfcsusb *hw) _queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY, sizeof(struct ph_info_dch) + dch->dev.nrbchan * sizeof(struct ph_info_ch), phi, GFP_ATOMIC); + kfree(phi); } /* diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 23f0d5e99f35..713d43b4e563 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -1,3 +1,10 @@ +config LEDS_GPIO_REGISTER + bool + help + This option provides the function gpio_led_register_device. + As this function is used by arch code it must not be compiled as a + module. + menuconfig NEW_LEDS bool "LED Support" help @@ -7,22 +14,14 @@ menuconfig NEW_LEDS This is not related to standard keyboard LEDs which are controlled via the input system. +if NEW_LEDS + config LEDS_CLASS bool "LED Class Support" - depends on NEW_LEDS help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. -config LEDS_GPIO_REGISTER - bool - help - This option provides the function gpio_led_register_device. - As this function is used by arch code it must not be compiled as a - module. - -if NEW_LEDS - comment "LED drivers" config LEDS_88PM860X @@ -391,6 +390,7 @@ config LEDS_NETXBIG config LEDS_ASIC3 bool "LED support for the HTC ASIC3" + depends on LEDS_CLASS depends on MFD_ASIC3 default y help diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index c0cff64a1ae6..cc1dc4817fac 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -593,7 +593,7 @@ static void lp5521_unregister_sysfs(struct i2c_client *client) &lp5521_led_attribute_group); } -static int __init lp5521_init_led(struct lp5521_led *led, +static int __devinit lp5521_init_led(struct lp5521_led *led, struct i2c_client *client, int chan, struct lp5521_platform_data *pdata) { @@ -637,7 +637,7 @@ static int __init lp5521_init_led(struct lp5521_led *led, return 0; } -static int lp5521_probe(struct i2c_client *client, +static int __devinit lp5521_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5521_chip *chip; diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index e19fed25f137..5971e309b234 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -826,7 +826,7 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) return 0; } -static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, +static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev, int chan, struct lp5523_platform_data *pdata) { char name[32]; @@ -872,7 +872,7 @@ static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, static struct i2c_driver lp5523_driver; -static int lp5523_probe(struct i2c_client *client, +static int __devinit lp5523_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5523_chip *chip; diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index d8d3a1e910a1..a2c874623e35 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -88,7 +88,7 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { static struct i2c_driver pca9532_driver = { .driver = { - .name = "pca953x", + .name = "leds-pca953x", }, .probe = pca9532_probe, .remove = pca9532_remove, diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 70bd738b8b99..574b09afedd3 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -534,6 +534,82 @@ void bitmap_print_sb(struct bitmap *bitmap) kunmap_atomic(sb, KM_USER0); } +/* + * bitmap_new_disk_sb + * @bitmap + * + * This function is somewhat the reverse of bitmap_read_sb. bitmap_read_sb + * reads and verifies the on-disk bitmap superblock and populates bitmap_info. + * This function verifies 'bitmap_info' and populates the on-disk bitmap + * structure, which is to be written to disk. + * + * Returns: 0 on success, -Exxx on error + */ +static int bitmap_new_disk_sb(struct bitmap *bitmap) +{ + bitmap_super_t *sb; + unsigned long chunksize, daemon_sleep, write_behind; + int err = -EINVAL; + + bitmap->sb_page = alloc_page(GFP_KERNEL); + if (IS_ERR(bitmap->sb_page)) { + err = PTR_ERR(bitmap->sb_page); + bitmap->sb_page = NULL; + return err; + } + bitmap->sb_page->index = 0; + + sb = kmap_atomic(bitmap->sb_page, KM_USER0); + + sb->magic = cpu_to_le32(BITMAP_MAGIC); + sb->version = cpu_to_le32(BITMAP_MAJOR_HI); + + chunksize = bitmap->mddev->bitmap_info.chunksize; + BUG_ON(!chunksize); + if (!is_power_of_2(chunksize)) { + kunmap_atomic(sb, KM_USER0); + printk(KERN_ERR "bitmap chunksize not a power of 2\n"); + return -EINVAL; + } + sb->chunksize = cpu_to_le32(chunksize); + + daemon_sleep = bitmap->mddev->bitmap_info.daemon_sleep; + if (!daemon_sleep || + (daemon_sleep < 1) || (daemon_sleep > MAX_SCHEDULE_TIMEOUT)) { + printk(KERN_INFO "Choosing daemon_sleep default (5 sec)\n"); + daemon_sleep = 5 * HZ; + } + sb->daemon_sleep = cpu_to_le32(daemon_sleep); + bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep; + + /* + * FIXME: write_behind for RAID1. If not specified, what + * is a good choice? We choose COUNTER_MAX / 2 arbitrarily. + */ + write_behind = bitmap->mddev->bitmap_info.max_write_behind; + if (write_behind > COUNTER_MAX) + write_behind = COUNTER_MAX / 2; + sb->write_behind = cpu_to_le32(write_behind); + bitmap->mddev->bitmap_info.max_write_behind = write_behind; + + /* keep the array size field of the bitmap superblock up to date */ + sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors); + + memcpy(sb->uuid, bitmap->mddev->uuid, 16); + + bitmap->flags |= BITMAP_STALE; + sb->state |= cpu_to_le32(BITMAP_STALE); + bitmap->events_cleared = bitmap->mddev->events; + sb->events_cleared = cpu_to_le64(bitmap->mddev->events); + + bitmap->flags |= BITMAP_HOSTENDIAN; + sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN); + + kunmap_atomic(sb, KM_USER0); + + return 0; +} + /* read the superblock from the bitmap file and initialize some bitmap fields */ static int bitmap_read_sb(struct bitmap *bitmap) { @@ -575,7 +651,7 @@ static int bitmap_read_sb(struct bitmap *bitmap) reason = "unrecognized superblock version"; else if (chunksize < 512) reason = "bitmap chunksize too small"; - else if ((1 << ffz(~chunksize)) != chunksize) + else if (!is_power_of_2(chunksize)) reason = "bitmap chunksize not a power of 2"; else if (daemon_sleep < 1 || daemon_sleep > MAX_SCHEDULE_TIMEOUT) reason = "daemon sleep period out of range"; @@ -1076,8 +1152,8 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) } printk(KERN_INFO "%s: bitmap initialized from disk: " - "read %lu/%lu pages, set %lu bits\n", - bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt); + "read %lu/%lu pages, set %lu of %lu bits\n", + bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt, chunks); return 0; @@ -1332,7 +1408,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect return 0; } - if (unlikely((*bmc & COUNTER_MAX) == COUNTER_MAX)) { + if (unlikely(COUNTER(*bmc) == COUNTER_MAX)) { DEFINE_WAIT(__wait); /* note that it is safe to do the prepare_to_wait * after the test as long as we do it before dropping @@ -1404,10 +1480,10 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto sysfs_notify_dirent_safe(bitmap->sysfs_can_clear); } - if (!success && ! (*bmc & NEEDED_MASK)) + if (!success && !NEEDED(*bmc)) *bmc |= NEEDED_MASK; - if ((*bmc & COUNTER_MAX) == COUNTER_MAX) + if (COUNTER(*bmc) == COUNTER_MAX) wake_up(&bitmap->overflow_wait); (*bmc)--; @@ -1728,9 +1804,16 @@ int bitmap_create(mddev_t *mddev) vfs_fsync(file, 1); } /* read superblock from bitmap file (this sets mddev->bitmap_info.chunksize) */ - if (!mddev->bitmap_info.external) - err = bitmap_read_sb(bitmap); - else { + if (!mddev->bitmap_info.external) { + /* + * If 'MD_ARRAY_FIRST_USE' is set, then device-mapper is + * instructing us to create a new on-disk bitmap instance. + */ + if (test_and_clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags)) + err = bitmap_new_disk_sb(bitmap); + else + err = bitmap_read_sb(bitmap); + } else { err = 0; if (mddev->bitmap_info.chunksize == 0 || mddev->bitmap_info.daemon_sleep == 0) @@ -1754,9 +1837,6 @@ int bitmap_create(mddev_t *mddev) bitmap->chunks = chunks; bitmap->pages = pages; bitmap->missing_pages = pages; - bitmap->counter_bits = COUNTER_BITS; - - bitmap->syncchunk = ~0UL; #ifdef INJECT_FATAL_FAULT_1 bitmap->bp = NULL; diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h index d0aeaf46d932..b2a127e891ac 100644 --- a/drivers/md/bitmap.h +++ b/drivers/md/bitmap.h @@ -85,7 +85,6 @@ typedef __u16 bitmap_counter_t; #define COUNTER_BITS 16 #define COUNTER_BIT_SHIFT 4 -#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8) #define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3) #define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1))) @@ -196,19 +195,10 @@ struct bitmap { mddev_t *mddev; /* the md device that the bitmap is for */ - int counter_bits; /* how many bits per block counter */ - /* bitmap chunksize -- how much data does each bit represent? */ unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */ unsigned long chunks; /* total number of data chunks for the array */ - /* We hold a count on the chunk currently being synced, and drop - * it when the last block is started. If the resync is aborted - * midway, we need to be able to drop that count, so we remember - * the counted chunk.. - */ - unsigned long syncchunk; - __u64 events_cleared; int need_sync; diff --git a/drivers/md/md.c b/drivers/md/md.c index aa640a85bb21..91e31e260b4a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -351,6 +351,9 @@ void mddev_resume(mddev_t *mddev) mddev->suspended = 0; wake_up(&mddev->sb_wait); mddev->pers->quiesce(mddev, 0); + + md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ } EXPORT_SYMBOL_GPL(mddev_resume); @@ -1750,6 +1753,18 @@ static struct super_type super_types[] = { }, }; +static void sync_super(mddev_t *mddev, mdk_rdev_t *rdev) +{ + if (mddev->sync_super) { + mddev->sync_super(mddev, rdev); + return; + } + + BUG_ON(mddev->major_version >= ARRAY_SIZE(super_types)); + + super_types[mddev->major_version].sync_super(mddev, rdev); +} + static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2) { mdk_rdev_t *rdev, *rdev2; @@ -1781,8 +1796,8 @@ int md_integrity_register(mddev_t *mddev) if (list_empty(&mddev->disks)) return 0; /* nothing to do */ - if (blk_get_integrity(mddev->gendisk)) - return 0; /* already registered */ + if (!mddev->gendisk || blk_get_integrity(mddev->gendisk)) + return 0; /* shouldn't register, or already is */ list_for_each_entry(rdev, &mddev->disks, same_set) { /* skip spares and non-functional disks */ if (test_bit(Faulty, &rdev->flags)) @@ -2168,8 +2183,7 @@ static void sync_sbs(mddev_t * mddev, int nospares) /* Don't update this superblock */ rdev->sb_loaded = 2; } else { - super_types[mddev->major_version]. - sync_super(mddev, rdev); + sync_super(mddev, rdev); rdev->sb_loaded = 1; } } @@ -2462,7 +2476,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (rdev->raid_disk == -1) return -EEXIST; /* personality does all needed checks */ - if (rdev->mddev->pers->hot_add_disk == NULL) + if (rdev->mddev->pers->hot_remove_disk == NULL) return -EINVAL; err = rdev->mddev->pers-> hot_remove_disk(rdev->mddev, rdev->raid_disk); @@ -4619,9 +4633,6 @@ int md_run(mddev_t *mddev) if (mddev->flags) md_update_sb(mddev, 0); - md_wakeup_thread(mddev->thread); - md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ - md_new_event(mddev); sysfs_notify_dirent_safe(mddev->sysfs_state); sysfs_notify_dirent_safe(mddev->sysfs_action); @@ -4642,6 +4653,10 @@ static int do_md_run(mddev_t *mddev) bitmap_destroy(mddev); goto out; } + + md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ + set_capacity(mddev->gendisk, mddev->array_sectors); revalidate_disk(mddev->gendisk); mddev->changed = 1; @@ -5259,6 +5274,8 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) if (mddev->degraded) set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + if (!err) + md_new_event(mddev); md_wakeup_thread(mddev->thread); return err; } @@ -6866,8 +6883,8 @@ void md_do_sync(mddev_t *mddev) * Tune reconstruction: */ window = 32*(PAGE_SIZE/512); - printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n", - window/2,(unsigned long long) max_sectors/2); + printk(KERN_INFO "md: using %dk window, over a total of %lluk.\n", + window/2, (unsigned long long)max_sectors/2); atomic_set(&mddev->recovery_active, 0); last_check = 0; @@ -7045,7 +7062,6 @@ void md_do_sync(mddev_t *mddev) } EXPORT_SYMBOL_GPL(md_do_sync); - static int remove_and_add_spares(mddev_t *mddev) { mdk_rdev_t *rdev; @@ -7072,6 +7088,7 @@ static int remove_and_add_spares(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags) && !test_bit(Blocked, &rdev->flags)) spares++; if (rdev->raid_disk < 0 @@ -7157,6 +7174,9 @@ static void reap_sync_thread(mddev_t *mddev) */ void md_check_recovery(mddev_t *mddev) { + if (mddev->suspended) + return; + if (mddev->bitmap) bitmap_daemon_work(mddev); diff --git a/drivers/md/md.h b/drivers/md/md.h index 0b1fd3f1d85b..1c26c7a08ae6 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -124,6 +124,7 @@ struct mddev_s #define MD_CHANGE_DEVS 0 /* Some device status has changed */ #define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */ #define MD_CHANGE_PENDING 2 /* switch from 'clean' to 'active' in progress */ +#define MD_ARRAY_FIRST_USE 3 /* First use of array, needs initialization */ int suspended; atomic_t active_io; @@ -330,6 +331,7 @@ struct mddev_s atomic_t flush_pending; struct work_struct flush_work; struct work_struct event_work; /* used by dm to report failure event */ + void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev); }; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 5d096096f958..f7431b6d8447 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -497,21 +497,19 @@ static int read_balance(conf_t *conf, r1bio_t *r1_bio) return best_disk; } -static int raid1_congested(void *data, int bits) +int md_raid1_congested(mddev_t *mddev, int bits) { - mddev_t *mddev = data; conf_t *conf = mddev->private; int i, ret = 0; - if (mddev_congested(mddev, bits)) - return 1; - rcu_read_lock(); for (i = 0; i < mddev->raid_disks; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); + BUG_ON(!q); + /* Note the '|| 1' - when read_balance prefers * non-congested targets, it can be removed */ @@ -524,7 +522,15 @@ static int raid1_congested(void *data, int bits) rcu_read_unlock(); return ret; } +EXPORT_SYMBOL_GPL(md_raid1_congested); +static int raid1_congested(void *data, int bits) +{ + mddev_t *mddev = data; + + return mddev_congested(mddev, bits) || + md_raid1_congested(mddev, bits); +} static void flush_pending_writes(conf_t *conf) { @@ -1972,6 +1978,8 @@ static int run(mddev_t *mddev) return PTR_ERR(conf); list_for_each_entry(rdev, &mddev->disks, same_set) { + if (!mddev->gendisk) + continue; disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk @@ -2013,8 +2021,10 @@ static int run(mddev_t *mddev) md_set_array_sectors(mddev, raid1_size(mddev, 0, 0)); - mddev->queue->backing_dev_info.congested_fn = raid1_congested; - mddev->queue->backing_dev_info.congested_data = mddev; + if (mddev->queue) { + mddev->queue->backing_dev_info.congested_fn = raid1_congested; + mddev->queue->backing_dev_info.congested_data = mddev; + } return md_integrity_register(mddev); } diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h index 5fc4ca1af863..e743a64fac4f 100644 --- a/drivers/md/raid1.h +++ b/drivers/md/raid1.h @@ -126,4 +126,6 @@ struct r1bio_s { */ #define R1BIO_Returned 6 +extern int md_raid1_congested(mddev_t *mddev, int bits); + #endif diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 346e69bfdab3..b72edf35ec54 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -129,7 +129,7 @@ static inline int raid5_dec_bi_hw_segments(struct bio *bio) static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt) { - bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16); + bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16); } /* Find first data disk in a raid6 stripe */ @@ -514,7 +514,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) bi = &sh->dev[i].req; bi->bi_rw = rw; - if (rw == WRITE) + if (rw & WRITE) bi->bi_end_io = raid5_end_write_request; else bi->bi_end_io = raid5_end_read_request; @@ -548,13 +548,13 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) bi->bi_io_vec[0].bv_offset = 0; bi->bi_size = STRIPE_SIZE; bi->bi_next = NULL; - if (rw == WRITE && + if ((rw & WRITE) && test_bit(R5_ReWrite, &sh->dev[i].flags)) atomic_add(STRIPE_SECTORS, &rdev->corrected_errors); generic_make_request(bi); } else { - if (rw == WRITE) + if (rw & WRITE) set_bit(STRIPE_DEGRADED, &sh->state); pr_debug("skip op %ld on disc %d for sector %llu\n", bi->bi_rw, i, (unsigned long long)sh->sector); @@ -585,7 +585,7 @@ async_copy_data(int frombio, struct bio *bio, struct page *page, init_async_submit(&submit, flags, tx, NULL, NULL, NULL); bio_for_each_segment(bvl, bio, i) { - int len = bio_iovec_idx(bio, i)->bv_len; + int len = bvl->bv_len; int clen; int b_offset = 0; @@ -601,8 +601,8 @@ async_copy_data(int frombio, struct bio *bio, struct page *page, clen = len; if (clen > 0) { - b_offset += bio_iovec_idx(bio, i)->bv_offset; - bio_page = bio_iovec_idx(bio, i)->bv_page; + b_offset += bvl->bv_offset; + bio_page = bvl->bv_page; if (frombio) tx = async_memcpy(page, bio_page, page_offset, b_offset, clen, &submit); @@ -4858,7 +4858,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) printk(KERN_INFO "md/raid:%s: device %s operational as raid" " disk %d\n", mdname(mddev), bdevname(rdev->bdev, b), raid_disk); - } else + } else if (rdev->saved_raid_disk != raid_disk) /* Cannot rely on bitmap to complete recovery */ conf->fullsync = 1; } diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 2354336862cf..934185cca758 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -25,8 +25,8 @@ #include <linux/delay.h> #include <media/cx25840.h> #include <linux/firmware.h> -#include <staging/altera.h> +#include "../../../staging/altera-stapl/altera.h" #include "cx23885.h" #include "tuner-xc2028.h" #include "netup-init.h" diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0f09c057e796..6ca938a6bf94 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -728,6 +728,9 @@ config MFD_TPS65910 if you say yes here you get support for the TPS65910 series of Power Management chips. +config TPS65911_COMPARATOR + tristate + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index efe3cc33ed92..d7d47d2a4c76 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o +obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index c27fd1fc3b86..c71ae09430c5 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -619,6 +619,7 @@ static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk) /* MFD cells (SPI, PWM, LED, DS1WM, MMC) */ static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 1, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] = { diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 2808bd125d13..04c7093d6499 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -99,6 +99,7 @@ static int ds1wm_disable(struct platform_device *pdev) static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 0, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] __initdata = { diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 855219526ccb..1717144fe7f4 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -26,7 +26,6 @@ #include <linux/spinlock.h> #include <linux/gpio.h> #include <plat/usb.h> -#include <linux/pm_runtime.h> #define USBHS_DRIVER_NAME "usbhs-omap" #define OMAP_EHCI_DEVICE "ehci-omap" @@ -147,6 +146,9 @@ struct usbhs_hcd_omap { + struct clk *usbhost_ick; + struct clk *usbhost_hs_fck; + struct clk *usbhost_fs_fck; struct clk *xclk60mhsp1_ck; struct clk *xclk60mhsp2_ck; struct clk *utmi_p1_fck; @@ -156,6 +158,8 @@ struct usbhs_hcd_omap { struct clk *usbhost_p2_fck; struct clk *usbtll_p2_fck; struct clk *init_60m_fclk; + struct clk *usbtll_fck; + struct clk *usbtll_ick; void __iomem *uhh_base; void __iomem *tll_base; @@ -349,13 +353,46 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) omap->platdata.ehci_data = pdata->ehci_data; omap->platdata.ohci_data = pdata->ohci_data; - pm_runtime_enable(&pdev->dev); + omap->usbhost_ick = clk_get(dev, "usbhost_ick"); + if (IS_ERR(omap->usbhost_ick)) { + ret = PTR_ERR(omap->usbhost_ick); + dev_err(dev, "usbhost_ick failed error:%d\n", ret); + goto err_end; + } + + omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); + if (IS_ERR(omap->usbhost_hs_fck)) { + ret = PTR_ERR(omap->usbhost_hs_fck); + dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); + goto err_usbhost_ick; + } + + omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); + if (IS_ERR(omap->usbhost_fs_fck)) { + ret = PTR_ERR(omap->usbhost_fs_fck); + dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); + goto err_usbhost_hs_fck; + } + + omap->usbtll_fck = clk_get(dev, "usbtll_fck"); + if (IS_ERR(omap->usbtll_fck)) { + ret = PTR_ERR(omap->usbtll_fck); + dev_err(dev, "usbtll_fck failed error:%d\n", ret); + goto err_usbhost_fs_fck; + } + + omap->usbtll_ick = clk_get(dev, "usbtll_ick"); + if (IS_ERR(omap->usbtll_ick)) { + ret = PTR_ERR(omap->usbtll_ick); + dev_err(dev, "usbtll_ick failed error:%d\n", ret); + goto err_usbtll_fck; + } omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(omap->utmi_p1_fck)) { ret = PTR_ERR(omap->utmi_p1_fck); dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_end; + goto err_usbtll_ick; } omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); @@ -485,8 +522,22 @@ err_xclk60mhsp1_ck: err_utmi_p1_fck: clk_put(omap->utmi_p1_fck); +err_usbtll_ick: + clk_put(omap->usbtll_ick); + +err_usbtll_fck: + clk_put(omap->usbtll_fck); + +err_usbhost_fs_fck: + clk_put(omap->usbhost_fs_fck); + +err_usbhost_hs_fck: + clk_put(omap->usbhost_hs_fck); + +err_usbhost_ick: + clk_put(omap->usbhost_ick); + err_end: - pm_runtime_disable(&pdev->dev); kfree(omap); end_probe: @@ -520,7 +571,11 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) clk_put(omap->utmi_p2_fck); clk_put(omap->xclk60mhsp1_ck); clk_put(omap->utmi_p1_fck); - pm_runtime_disable(&pdev->dev); + clk_put(omap->usbtll_ick); + clk_put(omap->usbtll_fck); + clk_put(omap->usbhost_fs_fck); + clk_put(omap->usbhost_hs_fck); + clk_put(omap->usbhost_ick); kfree(omap); return 0; @@ -640,6 +695,7 @@ static int usbhs_enable(struct device *dev) struct usbhs_omap_platform_data *pdata = &omap->platdata; unsigned long flags = 0; int ret = 0; + unsigned long timeout; unsigned reg; dev_dbg(dev, "starting TI HSUSB Controller\n"); @@ -652,7 +708,11 @@ static int usbhs_enable(struct device *dev) if (omap->count > 0) goto end_count; - pm_runtime_get_sync(dev); + clk_enable(omap->usbhost_ick); + clk_enable(omap->usbhost_hs_fck); + clk_enable(omap->usbhost_fs_fck); + clk_enable(omap->usbtll_fck); + clk_enable(omap->usbtll_ick); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { @@ -676,6 +736,50 @@ static int usbhs_enable(struct device *dev) omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); + /* perform TLL soft reset, and wait until reset is complete */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_SOFTRESET); + + /* Wait for TLL reset to complete */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(dev, "operation timed out\n"); + ret = -EINVAL; + goto err_tll; + } + } + + dev_dbg(dev, "TLL RESET DONE\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_AUTOIDLE); + + /* Put UHH in NoIdle/NoStandby mode */ + reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); + if (is_omap_usbhs_rev1(omap)) { + reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE); + reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; + + + } else if (is_omap_usbhs_rev2(omap)) { + reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; + reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); /* setup ULPI bypass and burst configurations */ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN @@ -815,8 +919,6 @@ end_count: return 0; err_tll: - pm_runtime_put_sync(dev); - spin_unlock_irqrestore(&omap->lock, flags); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) gpio_free(pdata->ehci_data->reset_gpio_port[0]); @@ -824,6 +926,13 @@ err_tll: if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) gpio_free(pdata->ehci_data->reset_gpio_port[1]); } + + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); + spin_unlock_irqrestore(&omap->lock, flags); return ret; } @@ -896,7 +1005,11 @@ static void usbhs_disable(struct device *dev) clk_disable(omap->utmi_p1_fck); } - pm_runtime_put_sync(dev); + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); /* The gpio_free migh sleep; so unlock the spinlock */ spin_unlock_irqrestore(&omap->lock, flags); diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index 3d2dc56a3d40..283ac6759757 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -125,7 +125,7 @@ static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); static __devinit int tps65911_comparator_probe(struct platform_device *pdev) { struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); - struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev); + struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); int ret; ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold); diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index 200311fea369..e2a52e5cf449 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -609,6 +609,7 @@ static int apds990x_detect(struct apds990x_chip *chip) return ret; } +#if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME) static int apds990x_chip_on(struct apds990x_chip *chip) { int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), @@ -624,6 +625,7 @@ static int apds990x_chip_on(struct apds990x_chip *chip) apds990x_mode_on(chip); return 0; } +#endif static int apds990x_chip_off(struct apds990x_chip *chip) { diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c index d019746551f3..2a40d0efdff5 100644 --- a/drivers/misc/cb710/sgbuf2.c +++ b/drivers/misc/cb710/sgbuf2.c @@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) static inline bool needs_unaligned_copy(const void *ptr) { -#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS return false; #else return ((ptr - NULL) & 3) != 0; diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index e01e08c8c88b..bc685bfc4c33 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -174,7 +174,7 @@ struct cs5535_mfgpt_timer *cs5535_mfgpt_alloc_timer(int timer_nr, int domain) timer_nr = t < max ? (int) t : -1; } else { /* check if the requested timer's available */ - if (test_bit(timer_nr, mfgpt->avail)) + if (!test_bit(timer_nr, mfgpt->avail)) timer_nr = -1; } diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c index 668d41e594a9..df03dd3bd0e2 100644 --- a/drivers/misc/ioc4.c +++ b/drivers/misc/ioc4.c @@ -270,7 +270,7 @@ ioc4_variant(struct ioc4_driver_data *idd) return IOC4_VARIANT_PCI_RT; } -static void __devinit +static void ioc4_load_modules(struct work_struct *work) { request_module("sgiioc4"); diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index b0c56313dbbb..8cebec5e85ee 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -304,7 +304,10 @@ static int check_and_rewind_pc(char *put_str, char *arg) return 1; } /* Readjust the instruction pointer if needed */ - instruction_pointer_set(&kgdbts_regs, ip + offset); + ip += offset; +#ifdef GDB_ADJUSTS_BREAK_OFFSET + instruction_pointer_set(&kgdbts_regs, ip); +#endif return 0; } diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index 81d7fa4ec0db..150cd7061b80 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -120,6 +120,7 @@ static int recur_count = REC_NUM_DEFAULT; static enum cname cpoint = CN_INVALID; static enum ctype cptype = CT_NONE; static int count = DEFAULT_COUNT; +static DEFINE_SPINLOCK(count_lock); module_param(recur_count, int, 0644); MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\ @@ -230,11 +231,14 @@ static const char *cp_name_to_str(enum cname name) static int lkdtm_parse_commandline(void) { int i; + unsigned long flags; if (cpoint_count < 1 || recur_count < 1) return -EINVAL; + spin_lock_irqsave(&count_lock, flags); count = cpoint_count; + spin_unlock_irqrestore(&count_lock, flags); /* No special parameters */ if (!cpoint_type && !cpoint_name) @@ -349,6 +353,9 @@ static void lkdtm_do_action(enum ctype which) static void lkdtm_handler(void) { + unsigned long flags; + + spin_lock_irqsave(&count_lock, flags); count--; printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n", cp_name_to_str(cpoint), cp_type_to_str(cptype), count); @@ -357,6 +364,7 @@ static void lkdtm_handler(void) lkdtm_do_action(cptype); count = cpoint_count; } + spin_unlock_irqrestore(&count_lock, flags); } static int lkdtm_register_cpoint(enum cname which) diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index bb6f9255c17c..374dfcfccd07 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -317,7 +317,8 @@ EXPORT_SYMBOL_GPL(pti_request_masterchannel); * a master, channel ID address * used to write to PTI HW. * - * @mc: master, channel apeture ID address to be released. + * @mc: master, channel apeture ID address to be released. This + * will de-allocate the structure via kfree(). */ void pti_release_masterchannel(struct pti_masterchannel *mc) { @@ -475,8 +476,10 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty) else pti_tty_data->mc = pti_request_masterchannel(2); - if (pti_tty_data->mc == NULL) + if (pti_tty_data->mc == NULL) { + kfree(pti_tty_data); return -ENXIO; + } tty->driver_data = pti_tty_data; } @@ -495,7 +498,7 @@ static void pti_tty_cleanup(struct tty_struct *tty) if (pti_tty_data == NULL) return; pti_release_masterchannel(pti_tty_data->mc); - kfree(tty->driver_data); + kfree(pti_tty_data); tty->driver_data = NULL; } @@ -581,7 +584,7 @@ static int pti_char_open(struct inode *inode, struct file *filp) static int pti_char_release(struct inode *inode, struct file *filp) { pti_release_masterchannel(filp->private_data); - kfree(filp->private_data); + filp->private_data = NULL; return 0; } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index ee5109a3cd98..42f067347bc7 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -495,14 +495,14 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } } + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + if (atomic_dec_return(&queued_msg->use_count) == 0) { dev_kfree_skb(skb); kfree(queued_msg); } - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - return NETDEV_TX_OK; } diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c index 7aded90f9daa..cfbddbef11de 100644 --- a/drivers/misc/spear13xx_pcie_gadget.c +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -845,7 +845,7 @@ err_iounmap: err_iounmap_app: iounmap(config->va_app_base); err_kzalloc: - kfree(config); + kfree(target); err_rel_res: release_mem_region(res1->start, resource_size(res1)); err_rel_res0: diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 1a05fe08e2cb..54c91ffe4a91 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -605,7 +605,7 @@ long st_unregister(struct st_proto_s *proto) pr_debug("%s: %d ", __func__, proto->chnl_id); st_kim_ref(&st_gdata, 0); - if (proto->chnl_id >= ST_MAX_CHANNELS) { + if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) { pr_err(" chnl_id %d not supported", proto->chnl_id); return -EPROTONOSUPPORT; } @@ -747,8 +747,8 @@ static void st_tty_close(struct tty_struct *tty) pr_debug("%s: done ", __func__); } -static unsigned int st_tty_receive(struct tty_struct *tty, - const unsigned char *data, char *tty_flags, int count) +static void st_tty_receive(struct tty_struct *tty, const unsigned char *data, + char *tty_flags, int count) { #ifdef VERBOSE print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE, @@ -761,8 +761,6 @@ static unsigned int st_tty_receive(struct tty_struct *tty, */ st_recv(tty->disc_data, data, count); pr_debug("done %s", __func__); - - return count; } /* wake-up function called in from the TTY layer diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 5da93ee6f6be..38fd2f04c07e 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -245,9 +245,9 @@ void skip_change_remote_baud(unsigned char **ptr, long *len) pr_err("invalid action after change remote baud command"); } else { *ptr = *ptr + sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size; + ((struct bts_action *)cur_action)->size; *len = *len - (sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size); + ((struct bts_action *)cur_action)->size); /* warn user on not commenting these in firmware */ pr_warn("skipping the wait event of change remote baud"); } @@ -604,6 +604,10 @@ void st_kim_ref(struct st_data_s **core_data, int id) struct kim_data_s *kim_gdata; /* get kim_gdata reference from platform device */ pdev = st_get_plat_device(id); + if (!pdev) { + *core_data = NULL; + return; + } kim_gdata = dev_get_drvdata(&pdev->dev); *core_data = kim_gdata->core_data; } diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 71da5641e258..f85e42224559 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, INIT_LIST_HEAD(&md->part); md->usage = 1; - ret = mmc_init_queue(&md->queue, card, &md->lock); + ret = mmc_init_queue(&md->queue, card, &md->lock, subname); if (ret) goto err_putdisk; @@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); mmc_blk_remove_parts(card, md); + mmc_claim_host(card->host); + mmc_blk_part_switch(card, md); + mmc_release_host(card->host); mmc_blk_remove_req(md); mmc_set_drvdata(card, NULL); } diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index c07322c2658c..6413afa318d2 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q) * @mq: mmc queue * @card: mmc card to attach this queue * @lock: queue lock + * @subname: partition subname * * Initialise a MMC card request queue. */ -int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) +int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, + spinlock_t *lock, const char *subname) { struct mmc_host *host = card->host; u64 limit = BLK_BOUNCE_HIGH; @@ -133,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock mq->queue->limits.max_discard_sectors = UINT_MAX; if (card->erased_byte == 0) mq->queue->limits.discard_zeroes_data = 1; - if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) { - mq->queue->limits.discard_granularity = - card->erase_size << 9; - mq->queue->limits.discard_alignment = - card->erase_size << 9; - } + mq->queue->limits.discard_granularity = card->pref_erase << 9; if (mmc_can_secure_erase_trim(card)) queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, mq->queue); @@ -209,8 +206,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock sema_init(&mq->thread_sem, 1); - mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d", - host->index); + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s", + host->index, subname ? subname : ""); if (IS_ERR(mq->thread)) { ret = PTR_ERR(mq->thread); diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 64e66e0d4994..6223ef8dc9cd 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -19,7 +19,8 @@ struct mmc_queue { unsigned int bounce_sg_len; }; -extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); +extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, + const char *); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); extern void mmc_queue_resume(struct mmc_queue *); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 68091dda3f31..7843efe22359 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); erase_timeout = timeout_us / 1000; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2a7e43bc796d..aa7d1d79b8c5 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -247,12 +247,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) return 0; /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { - int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; - if (ext_csd_struct > 2) { + if (card->ext_csd.raw_ext_csd_structure > 2) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), - ext_csd_struct); + card->ext_csd.raw_ext_csd_structure); err = -EINVAL; goto out; } @@ -266,6 +266,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) goto out; } + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; if (card->ext_csd.rev >= 2) { card->ext_csd.sectors = ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | @@ -277,7 +281,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) mmc_card_set_blockaddr(card); } - + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: @@ -307,6 +311,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) mmc_hostname(card->host)); } + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; if (card->ext_csd.rev >= 3) { u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; @@ -334,6 +343,16 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; } + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_PARTITION_ATTRIBUTE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; if (card->ext_csd.rev >= 4) { /* * Enhanced area feature support -- check whether the eMMC @@ -341,7 +360,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) * area offset and size to user by adding sysfs interface. */ if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && - (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { u8 hc_erase_grp_sz = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; u8 hc_wp_grp_sz = @@ -401,17 +420,17 @@ static inline void mmc_free_ext_csd(u8 *ext_csd) } -static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, - unsigned bus_width) +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) { u8 *bw_ext_csd; int err; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + err = mmc_get_ext_csd(card, &bw_ext_csd); - if (err) - return err; - if ((ext_csd == NULL || bw_ext_csd == NULL)) { + if (err || bw_ext_csd == NULL) { if (bus_width != MMC_BUS_WIDTH_1) err = -EINVAL; goto out; @@ -421,35 +440,40 @@ static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, goto out; /* only compare read only fields */ - err = (!(ext_csd[EXT_CSD_PARTITION_SUPPORT] == + err = (!(card->ext_csd.raw_partition_support == bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && - (ext_csd[EXT_CSD_ERASED_MEM_CONT] == + (card->ext_csd.raw_erased_mem_count == bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && - (ext_csd[EXT_CSD_REV] == + (card->ext_csd.rev == bw_ext_csd[EXT_CSD_REV]) && - (ext_csd[EXT_CSD_STRUCTURE] == + (card->ext_csd.raw_ext_csd_structure == bw_ext_csd[EXT_CSD_STRUCTURE]) && - (ext_csd[EXT_CSD_CARD_TYPE] == + (card->ext_csd.raw_card_type == bw_ext_csd[EXT_CSD_CARD_TYPE]) && - (ext_csd[EXT_CSD_S_A_TIMEOUT] == + (card->ext_csd.raw_s_a_timeout == bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && - (ext_csd[EXT_CSD_HC_WP_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_gap_size == bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && - (ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] == + (card->ext_csd.raw_erase_timeout_mult == bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && - (ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_grp_size == bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && - (ext_csd[EXT_CSD_SEC_TRIM_MULT] == + (card->ext_csd.raw_sec_trim_mult == bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && - (ext_csd[EXT_CSD_SEC_ERASE_MULT] == + (card->ext_csd.raw_sec_erase_mult == bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && - (ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] == + (card->ext_csd.raw_sec_feature_support == bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && - (ext_csd[EXT_CSD_TRIM_MULT] == + (card->ext_csd.raw_trim_mult == bw_ext_csd[EXT_CSD_TRIM_MULT]) && - memcmp(&ext_csd[EXT_CSD_SEC_CNT], - &bw_ext_csd[EXT_CSD_SEC_CNT], - 4) != 0); + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3])); if (err) err = -EINVAL; @@ -770,7 +794,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) err = mmc_compare_ext_csds(card, - ext_csd, bus_width); else err = mmc_bus_test(card, bus_width); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 4d0c15bfa514..262fff019177 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host) static int mmc_sdio_power_restore(struct mmc_host *host) { int ret; + u32 ocr; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + * With these steps taken, mmc_select_voltage() is also required to + * restore the correct voltage setting of the card. + */ + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + + ret = mmc_send_io_op_cond(host, 0, &ocr); + if (ret) + goto out; + + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; + + host->ocr = mmc_select_voltage(host, ocr & ~0x7F); + if (!host->ocr) { + ret = -EINVAL; + goto out; + } + ret = mmc_sdio_init_card(host, host->ocr, host->card, mmc_card_keep_power(host)); if (!ret && host->sdio_irqs) mmc_signal_sdio_irq(host); + +out: mmc_release_host(host); return ret; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d29b9c36919a..d2565df8a7fb 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev) /* Then undo the runtime PM settings in sdio_bus_probe() */ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); out: return ret; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5da5bea0f9f0..fe140724a02e 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -582,6 +582,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { data->error = -ETIMEDOUT; + } else if (status & MCI_STARTBITERR) { + data->error = -ECOMM; } else if (status & MCI_TXUNDERRUN) { data->error = -EIO; } else if (status & MCI_RXOVERRUN) { @@ -1144,9 +1146,17 @@ static int __devinit mmci_probe(struct amba_device *dev, else if (ret != -ENOSYS) goto err_gpio_cd; + /* + * A gpio pin that will detect cards when inserted and removed + * will most likely want to trigger on the edges if it is + * 0 when ejected and 1 when inserted (or mutatis mutandis + * for the inverted case) so we request triggers on both + * edges. + */ ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), - mmci_cd_irq, 0, - DRIVER_NAME " (cd)", host); + mmci_cd_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + DRIVER_NAME " (cd)", host); if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index bb32e21c09db..2164e8c6476c 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -86,6 +86,7 @@ #define MCI_CMDRESPEND (1 << 6) #define MCI_CMDSENT (1 << 7) #define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) #define MCI_DATABLOCKEND (1 << 10) #define MCI_CMDACTIVE (1 << 11) #define MCI_TXACTIVE (1 << 12) @@ -112,6 +113,7 @@ #define MCI_CMDRESPENDCLR (1 << 6) #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) #define MCI_DATABLOCKENDCLR (1 << 10) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOITC (1 << 22) @@ -127,6 +129,7 @@ #define MCI_CMDRESPENDMASK (1 << 6) #define MCI_CMDSENTMASK (1 << 7) #define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) #define MCI_DATABLOCKENDMASK (1 << 10) #define MCI_CMDACTIVEMASK (1 << 11) #define MCI_TXACTIVEMASK (1 << 12) @@ -150,7 +153,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index e2aecb7f1d5c..ab66f2454dc4 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -25,6 +25,11 @@ #include <linux/mmc/core.h> #include <linux/mmc/host.h> +/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */ +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + MODULE_LICENSE("GPL"); enum { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 259ece047afc..dedf3dab8a3b 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -429,12 +429,14 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) return -EINVAL; } } - mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ reg = regulator_get(host->dev, "vmmc_aux"); host->vcc_aux = IS_ERR(reg) ? NULL : reg; + /* For eMMC do not power off when not in sleep state */ + if (mmc_slot(host).no_regulator_off_init) + return 0; /* * UGLY HACK: workaround regulator framework bugs. * When the bootloader leaves a supply active, it's @@ -959,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) spin_unlock(&host->irq_lock); if (host->use_dma && dma_ch != -1) { - dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, + host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); } @@ -1343,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) return; } - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, omap_hsmmc_get_dma_dir(host, data)); req_in_progress = host->req_in_progress; diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index b3654293017b..ce500f03df85 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; - if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { + if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { priv->param_tx.slave_id = p->dma_slave_tx; priv->param_rx.slave_id = p->dma_slave_rx; priv->dma_priv.chan_priv_tx = &priv->param_tx; @@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev) p->pdata = NULL; + tmio_mmc_host_remove(host); + for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); if (irq >= 0) free_irq(irq, host); } - tmio_mmc_host_remove(host); clk_disable(priv->clk); clk_put(priv->clk); kfree(priv); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ad6347bb02dd..0b09e8239aa0 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc) struct tmio_mmc_host *host = mmc_priv(mmc); struct tmio_mmc_data *pdata = host->pdata; - return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || - !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); + return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); } static int tmio_mmc_get_cd(struct mmc_host *mmc) diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index cbb03305b77b..d4455ffbefd8 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = { static int vub300_probe(struct usb_interface *interface, const struct usb_device_id *id) { /* NOT irq */ - struct vub300_mmc_host *vub300 = NULL; + struct vub300_mmc_host *vub300; struct usb_host_interface *iface_desc; struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); int i; @@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface, command_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_out_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_out_urb\n"); + dev_err(&udev->dev, "not enough memory for command_out_urb\n"); goto error0; } command_res_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_res_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_res_urb\n"); + dev_err(&udev->dev, "not enough memory for command_res_urb\n"); goto error1; } /* this also allocates memory for our VUB300 mmc host device */ mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); if (!mmc) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the mmc_host\n"); + dev_err(&udev->dev, "not enough memory for the mmc_host\n"); goto error4; } /* MMC core transfer sizes tunable parameters */ diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 0bb254c7d2b1..33d8aad8bba5 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -339,9 +339,9 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, (FIR_OP_UA << FIR_OP1_SHIFT) | (FIR_OP_RBW << FIR_OP2_SHIFT)); out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT); - /* 5 bytes for manuf, device and exts */ - out_be32(&lbc->fbcr, 5); - elbc_fcm_ctrl->read_bytes = 5; + /* nand_get_flash_type() reads 8 bytes of entire ID string */ + out_be32(&lbc->fbcr, 8); + elbc_fcm_ctrl->read_bytes = 8; elbc_fcm_ctrl->use_mdr = 1; elbc_fcm_ctrl->mdr = 0; diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index d84f6e8903a5..5b732988d493 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -412,7 +412,7 @@ el2_open(struct net_device *dev) outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); outb_p(0x00, E33G_IDCFR); msleep(1); - free_irq(*irqp, el2_probe_interrupt); + free_irq(*irqp, &seen); if (!seen) continue; @@ -422,6 +422,7 @@ el2_open(struct net_device *dev) continue; if (retval < 0) goto err_disable; + break; } while (*++irqp); if (*irqp == 0) { diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 5f25889e27ef..44b28b2d7003 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -185,7 +185,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -395,7 +395,7 @@ static struct isa_driver el3_isa_driver = { static int isa_registered; #ifdef CONFIG_PNP -static const struct pnp_device_id el3_pnp_ids[] __devinitconst = { +static struct pnp_device_id el3_pnp_ids[] = { { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */ { .id = "TCM5091" }, /* 3Com Etherlink III */ { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */ @@ -478,7 +478,7 @@ static int pnp_registered; #endif /* CONFIG_PNP */ #ifdef CONFIG_EISA -static const struct eisa_device_id el3_eisa_ids[] __devinitconst = { +static struct eisa_device_id el3_eisa_ids[] = { { "TCM5090" }, { "TCM5091" }, { "TCM5092" }, @@ -508,7 +508,7 @@ static int eisa_registered; #ifdef CONFIG_MCA static int el3_mca_probe(struct device *dev); -static const short el3_mca_adapter_ids[] __devinitconst = { +static short el3_mca_adapter_ids[] __initdata = { 0x627c, 0x627d, 0x62db, @@ -517,7 +517,7 @@ static const short el3_mca_adapter_ids[] __devinitconst = { 0x0000 }; -static const char *const el3_mca_adapter_names[] __devinitconst = { +static char *el3_mca_adapter_names[] __initdata = { "3Com 3c529 EtherLink III (10base2)", "3Com 3c529 EtherLink III (10baseT)", "3Com 3c529 EtherLink III (test mode)", @@ -601,7 +601,7 @@ static void el3_common_remove (struct net_device *dev) } #ifdef CONFIG_MCA -static int __devinit el3_mca_probe(struct device *device) +static int __init el3_mca_probe(struct device *device) { /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, * heavily modified by Chris Beauregard @@ -671,7 +671,7 @@ static int __devinit el3_mca_probe(struct device *device) #endif /* CONFIG_MCA */ #ifdef CONFIG_EISA -static int __devinit el3_eisa_probe (struct device *device) +static int __init el3_eisa_probe (struct device *device) { short i; int ioaddr, irq, if_port; diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 99f43d275442..8cc22568ebd3 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -901,14 +901,14 @@ static const struct dev_pm_ops vortex_pm_ops = { #endif /* !CONFIG_PM */ #ifdef CONFIG_EISA -static const struct eisa_device_id vortex_eisa_ids[] __devinitconst = { +static struct eisa_device_id vortex_eisa_ids[] = { { "TCM5920", CH_3C592 }, { "TCM5970", CH_3C597 }, { "" } }; MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); -static int __devinit vortex_eisa_probe(struct device *device) +static int __init vortex_eisa_probe(struct device *device) { void __iomem *ioaddr; struct eisa_device *edev; diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 98517a373473..e3bad8247fd1 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -992,6 +992,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, * features */ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; + dev->vlan_features = dev->features; dev->irq = pdev->irq; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 19f04a34783a..93359fab240e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3416,7 +3416,8 @@ config NETCONSOLE config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS && CONFIGFS_FS + depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \ + !(NETCONSOLE=y && CONFIGFS_FS=m) help This option enables the ability to dynamically reconfigure target parameters (interface, IP addresses, port numbers, MAC addresses) diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 0c9217f48b72..7b3e23f38913 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -50,7 +50,7 @@ static const char version[] = #ifdef __arm__ static void write_rreg(u_long base, u_int reg, u_int val) { - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "str%?h %0, [%2, #-4] @ NET_RDP" : @@ -60,7 +60,7 @@ static void write_rreg(u_long base, u_int reg, u_int val) static inline unsigned short read_rreg(u_long base_addr, u_int reg) { unsigned short v; - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "ldr%?h %0, [%2, #-4] @ NET_RDP" : "=r" (v) @@ -70,7 +70,7 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) static inline void write_ireg(u_long base, u_int reg, u_int val) { - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "str%?h %0, [%2, #8] @ NET_IDP" : @@ -80,7 +80,7 @@ static inline void write_ireg(u_long base, u_int reg, u_int val) static inline unsigned short read_ireg(u_long base_addr, u_int reg) { u_short v; - __asm__( + asm volatile( "str%?h %1, [%2] @ NAT_RAP\n\t" "ldr%?h %0, [%2, #8] @ NET_IDP\n\t" : "=r" (v) @@ -91,47 +91,48 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg) #define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1)) #define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1)) -static inline void +static void am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) { offset = ISAMEM_BASE + (offset << 1); length = (length + 1) & ~1; if ((int)buf & 2) { - __asm__ __volatile__("str%?h %2, [%0], #4" + asm volatile("str%?h %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; } while (length > 8) { - unsigned int tmp, tmp2; - __asm__ __volatile__( - "ldm%?ia %1!, {%2, %3}\n\t" + register unsigned int tmp asm("r2"), tmp2 asm("r3"); + asm volatile( + "ldm%?ia %0!, {%1, %2}" + : "+r" (buf), "=&r" (tmp), "=&r" (tmp2)); + length -= 8; + asm volatile( + "str%?h %1, [%0], #4\n\t" + "mov%? %1, %1, lsr #16\n\t" + "str%?h %1, [%0], #4\n\t" "str%?h %2, [%0], #4\n\t" "mov%? %2, %2, lsr #16\n\t" - "str%?h %2, [%0], #4\n\t" - "str%?h %3, [%0], #4\n\t" - "mov%? %3, %3, lsr #16\n\t" - "str%?h %3, [%0], #4" - : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2) - : "0" (offset), "1" (buf)); - length -= 8; + "str%?h %2, [%0], #4" + : "+r" (offset), "=&r" (tmp), "=&r" (tmp2)); } while (length > 0) { - __asm__ __volatile__("str%?h %2, [%0], #4" + asm volatile("str%?h %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; } } -static inline void +static void am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) { offset = ISAMEM_BASE + (offset << 1); length = (length + 1) & ~1; if ((int)buf & 2) { unsigned int tmp; - __asm__ __volatile__( + asm volatile( "ldr%?h %2, [%0], #4\n\t" "str%?b %2, [%1], #1\n\t" "mov%? %2, %2, lsr #8\n\t" @@ -140,12 +141,12 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned length -= 2; } while (length > 8) { - unsigned int tmp, tmp2, tmp3; - __asm__ __volatile__( + register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3; + asm volatile( "ldr%?h %2, [%0], #4\n\t" + "ldr%?h %4, [%0], #4\n\t" "ldr%?h %3, [%0], #4\n\t" - "orr%? %2, %2, %3, lsl #16\n\t" - "ldr%?h %3, [%0], #4\n\t" + "orr%? %2, %2, %4, lsl #16\n\t" "ldr%?h %4, [%0], #4\n\t" "orr%? %3, %3, %4, lsl #16\n\t" "stm%?ia %1!, {%2, %3}" @@ -155,7 +156,7 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned } while (length > 0) { unsigned int tmp; - __asm__ __volatile__( + asm volatile( "ldr%?h %2, [%0], #4\n\t" "str%?b %2, [%1], #1\n\t" "mov%? %2, %2, lsr #8\n\t" @@ -196,6 +197,42 @@ am79c961_ramtest(struct net_device *dev, unsigned int val) return errorcount; } +static void am79c961_mc_hash(char *addr, u16 *hash) +{ + if (addr[0] & 0x01) { + int idx, bit; + u32 crc; + + crc = ether_crc_le(ETH_ALEN, addr); + + idx = crc >> 30; + bit = (crc >> 26) & 15; + + hash[idx] |= 1 << bit; + } +} + +static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash) +{ + unsigned int mode = MODE_PORT_10BT; + + if (dev->flags & IFF_PROMISC) { + mode |= MODE_PROMISC; + memset(hash, 0xff, 4 * sizeof(*hash)); + } else if (dev->flags & IFF_ALLMULTI) { + memset(hash, 0xff, 4 * sizeof(*hash)); + } else { + struct netdev_hw_addr *ha; + + memset(hash, 0, 4 * sizeof(*hash)); + + netdev_for_each_mc_addr(ha, dev) + am79c961_mc_hash(ha->addr, hash); + } + + return mode; +} + static void am79c961_init_for_open(struct net_device *dev) { @@ -203,6 +240,7 @@ am79c961_init_for_open(struct net_device *dev) unsigned long flags; unsigned char *p; u_int hdr_addr, first_free_addr; + u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); int i; /* @@ -218,16 +256,12 @@ am79c961_init_for_open(struct net_device *dev) write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */ for (i = LADRL; i <= LADRH; i++) - write_rreg (dev->base_addr, i, 0); + write_rreg (dev->base_addr, i, multi_hash[i - LADRL]); for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2) write_rreg (dev->base_addr, i, p[0] | (p[1] << 8)); - i = MODE_PORT_10BT; - if (dev->flags & IFF_PROMISC) - i |= MODE_PROMISC; - - write_rreg (dev->base_addr, MODE, i); + write_rreg (dev->base_addr, MODE, mode); write_rreg (dev->base_addr, POLLINT, 0); write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS); write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS); @@ -340,21 +374,6 @@ am79c961_close(struct net_device *dev) return 0; } -static void am79c961_mc_hash(char *addr, unsigned short *hash) -{ - if (addr[0] & 0x01) { - int idx, bit; - u32 crc; - - crc = ether_crc_le(ETH_ALEN, addr); - - idx = crc >> 30; - bit = (crc >> 26) & 15; - - hash[idx] |= 1 << bit; - } -} - /* * Set or clear promiscuous/multicast mode filter for this adapter. */ @@ -362,24 +381,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) { struct dev_priv *priv = netdev_priv(dev); unsigned long flags; - unsigned short multi_hash[4], mode; + u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); int i, stopped; - mode = MODE_PORT_10BT; - - if (dev->flags & IFF_PROMISC) { - mode |= MODE_PROMISC; - } else if (dev->flags & IFF_ALLMULTI) { - memset(multi_hash, 0xff, sizeof(multi_hash)); - } else { - struct netdev_hw_addr *ha; - - memset(multi_hash, 0x00, sizeof(multi_hash)); - - netdev_for_each_mc_addr(ha, dev) - am79c961_mc_hash(ha->addr, multi_hash); - } - spin_lock_irqsave(&priv->chip_lock, flags); stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 5a77001b6d10..0b46b8ea0e80 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -283,10 +283,14 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget) skb = dev_alloc_skb(length + 2); if (likely(skb != NULL)) { + struct ep93xx_rdesc *rxd = &ep->descs->rdesc[entry]; skb_reserve(skb, 2); - dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr, + dma_sync_single_for_cpu(dev->dev.parent, rxd->buf_addr, length, DMA_FROM_DEVICE); skb_copy_to_linear_data(skb, ep->rx_buf[entry], length); + dma_sync_single_for_device(dev->dev.parent, + rxd->buf_addr, length, + DMA_FROM_DEVICE); skb_put(skb, length); skb->protocol = eth_type_trans(skb, dev); @@ -348,6 +352,7 @@ poll_some_more: static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) { struct ep93xx_priv *ep = netdev_priv(dev); + struct ep93xx_tdesc *txd; int entry; if (unlikely(skb->len > MAX_PKT_SIZE)) { @@ -359,11 +364,14 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) entry = ep->tx_pointer; ep->tx_pointer = (ep->tx_pointer + 1) & (TX_QUEUE_ENTRIES - 1); - ep->descs->tdesc[entry].tdesc1 = - TDESC1_EOF | (entry << 16) | (skb->len & 0xfff); + txd = &ep->descs->tdesc[entry]; + + txd->tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff); + dma_sync_single_for_cpu(dev->dev.parent, txd->buf_addr, skb->len, + DMA_TO_DEVICE); skb_copy_and_csum_dev(skb, ep->tx_buf[entry]); - dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr, - skb->len, DMA_TO_DEVICE); + dma_sync_single_for_device(dev->dev.parent, txd->buf_addr, skb->len, + DMA_TO_DEVICE); dev_kfree_skb(skb); spin_lock_irq(&ep->tx_pending_lock); @@ -457,89 +465,80 @@ static irqreturn_t ep93xx_irq(int irq, void *dev_id) static void ep93xx_free_buffers(struct ep93xx_priv *ep) { + struct device *dev = ep->dev->dev.parent; int i; - for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) { + for (i = 0; i < RX_QUEUE_ENTRIES; i++) { dma_addr_t d; d = ep->descs->rdesc[i].buf_addr; if (d) - dma_unmap_single(NULL, d, PAGE_SIZE, DMA_FROM_DEVICE); + dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_FROM_DEVICE); if (ep->rx_buf[i] != NULL) - free_page((unsigned long)ep->rx_buf[i]); + kfree(ep->rx_buf[i]); } - for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) { + for (i = 0; i < TX_QUEUE_ENTRIES; i++) { dma_addr_t d; d = ep->descs->tdesc[i].buf_addr; if (d) - dma_unmap_single(NULL, d, PAGE_SIZE, DMA_TO_DEVICE); + dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_TO_DEVICE); if (ep->tx_buf[i] != NULL) - free_page((unsigned long)ep->tx_buf[i]); + kfree(ep->tx_buf[i]); } - dma_free_coherent(NULL, sizeof(struct ep93xx_descs), ep->descs, + dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs, ep->descs_dma_addr); } -/* - * The hardware enforces a sub-2K maximum packet size, so we put - * two buffers on every hardware page. - */ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) { + struct device *dev = ep->dev->dev.parent; int i; - ep->descs = dma_alloc_coherent(NULL, sizeof(struct ep93xx_descs), - &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA); + ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs), + &ep->descs_dma_addr, GFP_KERNEL); if (ep->descs == NULL) return 1; - for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) { - void *page; + for (i = 0; i < RX_QUEUE_ENTRIES; i++) { + void *buf; dma_addr_t d; - page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); - if (page == NULL) + buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL); + if (buf == NULL) goto err; - d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(NULL, d)) { - free_page((unsigned long)page); + d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, d)) { + kfree(buf); goto err; } - ep->rx_buf[i] = page; + ep->rx_buf[i] = buf; ep->descs->rdesc[i].buf_addr = d; ep->descs->rdesc[i].rdesc1 = (i << 16) | PKT_BUF_SIZE; - - ep->rx_buf[i + 1] = page + PKT_BUF_SIZE; - ep->descs->rdesc[i + 1].buf_addr = d + PKT_BUF_SIZE; - ep->descs->rdesc[i + 1].rdesc1 = ((i + 1) << 16) | PKT_BUF_SIZE; } - for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) { - void *page; + for (i = 0; i < TX_QUEUE_ENTRIES; i++) { + void *buf; dma_addr_t d; - page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); - if (page == NULL) + buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL); + if (buf == NULL) goto err; - d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(NULL, d)) { - free_page((unsigned long)page); + d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(dev, d)) { + kfree(buf); goto err; } - ep->tx_buf[i] = page; + ep->tx_buf[i] = buf; ep->descs->tdesc[i].buf_addr = d; - - ep->tx_buf[i + 1] = page + PKT_BUF_SIZE; - ep->descs->tdesc[i + 1].buf_addr = d + PKT_BUF_SIZE; } return 0; @@ -829,6 +828,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev) } ep = netdev_priv(dev); ep->dev = dev; + SET_NETDEV_DEV(dev, &pdev->dev); netif_napi_add(dev, &ep->napi, ep93xx_poll, 64); platform_set_drvdata(pdev, dev); diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 68d45ba2d9b9..6c019e148546 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -52,13 +52,13 @@ MODULE_DESCRIPTION(DRV_DESC); MODULE_ALIAS("platform:bfin_mac"); #if defined(CONFIG_BFIN_MAC_USE_L1) -# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size) -# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr) +# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) +# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) #else -# define bfin_mac_alloc(dma_handle, size) \ - dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL) -# define bfin_mac_free(dma_handle, ptr) \ - dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle) +# define bfin_mac_alloc(dma_handle, size, num) \ + dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) +# define bfin_mac_free(dma_handle, ptr, num) \ + dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) #endif #define PKT_BUF_SZ 1580 @@ -95,7 +95,7 @@ static void desc_list_free(void) t = t->next; } } - bfin_mac_free(dma_handle, tx_desc); + bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); } if (rx_desc) { @@ -109,7 +109,7 @@ static void desc_list_free(void) r = r->next; } } - bfin_mac_free(dma_handle, rx_desc); + bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); } } @@ -126,13 +126,13 @@ static int desc_list_init(void) #endif tx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_tx) * + sizeof(struct net_dma_desc_tx), CONFIG_BFIN_TX_DESC_NUM); if (tx_desc == NULL) goto init_error; rx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_rx) * + sizeof(struct net_dma_desc_rx), CONFIG_BFIN_RX_DESC_NUM); if (rx_desc == NULL) goto init_error; diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c index 7d25a97d33f6..44e219c910da 100644 --- a/drivers/net/bna/bnad.c +++ b/drivers/net/bna/bnad.c @@ -1111,7 +1111,7 @@ bnad_mbox_irq_alloc(struct bnad *bnad, struct bna_intr_info *intr_info) { int err = 0; - unsigned long flags; + unsigned long irq_flags = 0, flags; u32 irq; irq_handler_t irq_handler; @@ -1125,18 +1125,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad, if (bnad->cfg_flags & BNAD_CF_MSIX) { irq_handler = (irq_handler_t)bnad_msix_mbox_handler; irq = bnad->msix_table[bnad->msix_num - 1].vector; - flags = 0; intr_info->intr_type = BNA_INTR_T_MSIX; intr_info->idl[0].vector = bnad->msix_num - 1; } else { irq_handler = (irq_handler_t)bnad_isr; irq = bnad->pcidev->irq; - flags = IRQF_SHARED; + irq_flags = IRQF_SHARED; intr_info->intr_type = BNA_INTR_T_INTX; /* intr_info->idl.vector = 0 ? */ } spin_unlock_irqrestore(&bnad->bna_lock, flags); - + flags = irq_flags; sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME); /* diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 4b70311a11ef..74be989f51c5 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -49,6 +49,7 @@ #include <linux/zlib.h> #include <linux/io.h> #include <linux/stringify.h> +#include <linux/vmalloc.h> #define BNX2X_MAIN #include "bnx2x.h" @@ -4537,8 +4538,7 @@ static int bnx2x_gunzip_init(struct bnx2x *bp) if (bp->strm == NULL) goto gunzip_nomem2; - bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL); + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); if (bp->strm->workspace == NULL) goto gunzip_nomem3; @@ -4562,7 +4562,7 @@ gunzip_nomem1: static void bnx2x_gunzip_end(struct bnx2x *bp) { if (bp->strm) { - kfree(bp->strm->workspace); + vfree(bp->strm->workspace); kfree(bp->strm); bp->strm = NULL; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 17b4dd94da90..eafe44a528ac 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -388,6 +388,8 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr) return next; } +#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb)) + /** * bond_dev_queue_xmit - Prepare skb for xmit. * @@ -400,6 +402,9 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, { skb->dev = slave_dev; skb->priority = 1; + + skb->queue_mapping = bond_queue_mapping(skb); + if (unlikely(netpoll_tx_running(slave_dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); else @@ -1292,6 +1297,7 @@ static inline int slave_enable_netpoll(struct slave *slave) goto out; np->dev = slave->dev; + strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { kfree(np); @@ -4206,6 +4212,7 @@ static inline int bond_slave_override(struct bonding *bond, return res; } + static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) { /* @@ -4216,6 +4223,11 @@ static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) */ u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; + /* + * Save the original txq to restore before passing to the driver + */ + bond_queue_mapping(skb) = skb->queue_mapping; + if (unlikely(txq >= dev->real_num_tx_queues)) { do { txq -= dev->real_num_tx_queues; diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 73c7e03617ec..3df0c0f8b8bf 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -167,8 +167,8 @@ static inline void debugfs_tx(struct ser_device *ser, const u8 *data, int size) #endif -static unsigned int ldisc_receive(struct tty_struct *tty, - const u8 *data, char *flags, int count) +static void ldisc_receive(struct tty_struct *tty, const u8 *data, + char *flags, int count) { struct sk_buff *skb = NULL; struct ser_device *ser; @@ -215,8 +215,6 @@ static unsigned int ldisc_receive(struct tty_struct *tty, } else ++ser->dev->stats.rx_dropped; update_tty_status(ser); - - return count; } static int handle_tx(struct ser_device *ser) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 1d699e3df547..754df5ef1729 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,7 +36,7 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" depends on CAN - default Y + default y ---help--- Enables the common framework for platform CAN drivers with Netlink support. This is the standard library for CAN drivers. @@ -45,7 +45,7 @@ config CAN_DEV config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" depends on CAN_DEV - default Y + default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the bit-rate specified via Netlink argument "bitrate" when the device diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index d4990568baee..17678117ed69 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -923,7 +923,7 @@ static int __devinit flexcan_probe(struct platform_device *pdev) mem_size = resource_size(mem); if (!request_mem_region(mem->start, mem_size, pdev->name)) { err = -EBUSY; - goto failed_req; + goto failed_get; } base = ioremap(mem->start, mem_size); @@ -977,9 +977,8 @@ static int __devinit flexcan_probe(struct platform_device *pdev) iounmap(base); failed_map: release_mem_region(mem->start, mem_size); - failed_req: - clk_put(clk); failed_get: + clk_put(clk); failed_clock: return err; } diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 75622d54581f..1b49df6b2470 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -425,17 +425,16 @@ static void slc_setup(struct net_device *dev) * in parallel */ -static unsigned int slcan_receive_buf(struct tty_struct *tty, +static void slcan_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct slcan *sl = (struct slcan *) tty->disc_data; - int bytes = count; if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) - return -ENODEV; + return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -444,8 +443,6 @@ static unsigned int slcan_receive_buf(struct tty_struct *tty, } slcan_unesc(sl, *cp++); } - - return count; } /************************************ diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 3f562ba2f0c9..76bf5892b962 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2026,7 +2026,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq, skb->ip_summed = CHECKSUM_UNNECESSARY; } else skb_checksum_none_assert(skb); - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(p->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; @@ -2145,7 +2145,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, if (!complete) return; - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(cpl->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 29a4f06fbfcf..dcc4a170b0f3 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -1781,8 +1781,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) ndev = alloc_etherdev(sizeof(struct emac_priv)); if (!ndev) { dev_err(&pdev->dev, "error allocating net_device\n"); - clk_put(emac_clk); - return -ENOMEM; + rc = -ENOMEM; + goto free_clk; } platform_set_drvdata(pdev, ndev); @@ -1796,7 +1796,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data\n"); - return -ENODEV; + rc = -ENODEV; + goto probe_quit; } /* MAC addr and PHY mask , RMII enable info from platform_data */ @@ -1929,8 +1930,9 @@ no_dma: iounmap(priv->remap_addr); probe_quit: - clk_put(emac_clk); free_netdev(ndev); +free_clk: + clk_put(emac_clk); return rc; } diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 17654059922d..8b0084d17c8c 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -331,18 +331,18 @@ static struct { "DE422",\ ""} -static const char* const depca_signature[] __devinitconst = DEPCA_SIGNATURE; +static char* __initdata depca_signature[] = DEPCA_SIGNATURE; enum depca_type { DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown }; -static const char depca_string[] = "depca"; +static char depca_string[] = "depca"; static int depca_device_remove (struct device *device); #ifdef CONFIG_EISA -static const struct eisa_device_id depca_eisa_ids[] __devinitconst = { +static struct eisa_device_id depca_eisa_ids[] = { { "DEC4220", de422 }, { "" } }; @@ -367,19 +367,19 @@ static struct eisa_driver depca_eisa_driver = { #define DE210_ID 0x628d #define DE212_ID 0x6def -static const short depca_mca_adapter_ids[] __devinitconst = { +static short depca_mca_adapter_ids[] = { DE210_ID, DE212_ID, 0x0000 }; -static const char *depca_mca_adapter_name[] = { +static char *depca_mca_adapter_name[] = { "DEC EtherWORKS MC Adapter (DE210)", "DEC EtherWORKS MC Adapter (DE212)", NULL }; -static const enum depca_type depca_mca_adapter_type[] = { +static enum depca_type depca_mca_adapter_type[] = { de210, de212, 0 @@ -541,9 +541,10 @@ static void SetMulticastFilter(struct net_device *dev); static int load_packet(struct net_device *dev, struct sk_buff *skb); static void depca_dbg_open(struct net_device *dev); -static const u_char de1xx_irq[] __devinitconst = { 2, 3, 4, 5, 7, 9, 0 }; -static const u_char de2xx_irq[] __devinitconst = { 5, 9, 10, 11, 15, 0 }; -static const u_char de422_irq[] __devinitconst = { 5, 9, 10, 11, 0 }; +static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 }; +static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 }; +static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 }; +static u_char *depca_irq; static int irq; static int io; @@ -579,7 +580,7 @@ static const struct net_device_ops depca_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -static int __devinit depca_hw_init (struct net_device *dev, struct device *device) +static int __init depca_hw_init (struct net_device *dev, struct device *device) { struct depca_private *lp; int i, j, offset, netRAM, mem_len, status = 0; @@ -747,7 +748,6 @@ static int __devinit depca_hw_init (struct net_device *dev, struct device *devic if (dev->irq < 2) { unsigned char irqnum; unsigned long irq_mask, delay; - const u_char *depca_irq; irq_mask = probe_irq_on(); @@ -770,7 +770,6 @@ static int __devinit depca_hw_init (struct net_device *dev, struct device *devic break; default: - depca_irq = NULL; break; /* Not reached */ } @@ -1303,7 +1302,7 @@ static void SetMulticastFilter(struct net_device *dev) } } -static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp) +static int __init depca_common_init (u_long ioaddr, struct net_device **devp) { int status = 0; @@ -1334,7 +1333,7 @@ static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp) /* ** Microchannel bus I/O device probe */ -static int __devinit depca_mca_probe(struct device *device) +static int __init depca_mca_probe(struct device *device) { unsigned char pos[2]; unsigned char where; @@ -1458,7 +1457,7 @@ static int __devinit depca_mca_probe(struct device *device) ** ISA bus I/O device probe */ -static void __devinit depca_platform_probe (void) +static void __init depca_platform_probe (void) { int i; struct platform_device *pldev; @@ -1498,7 +1497,7 @@ static void __devinit depca_platform_probe (void) } } -static enum depca_type __devinit depca_shmem_probe (ulong *mem_start) +static enum depca_type __init depca_shmem_probe (ulong *mem_start) { u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES; enum depca_type adapter = unknown; @@ -1559,7 +1558,7 @@ static int __devinit depca_isa_probe (struct platform_device *device) */ #ifdef CONFIG_EISA -static int __devinit depca_eisa_probe (struct device *device) +static int __init depca_eisa_probe (struct device *device) { enum depca_type adapter = unknown; struct eisa_device *edev; @@ -1630,7 +1629,7 @@ static int __devexit depca_device_remove (struct device *device) ** and Boot (readb) ROM. This will also give us a clue to the network RAM ** base address. */ -static int __devinit DepcaSignature(char *name, u_long base_addr) +static int __init DepcaSignature(char *name, u_long base_addr) { u_int i, j, k; void __iomem *ptr; diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index c445457b66d5..23179dbcedd2 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -346,7 +346,7 @@ parse_eeprom (struct net_device *dev) if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */ /* Check CRC */ crc = ~ether_crc_le (256 - 4, sromdata); - if (psrom->crc != crc) { + if (psrom->crc != cpu_to_le32(crc)) { printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name); return -1; diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index fbaff3584bd4..ee597e676ee5 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1157,9 +1157,6 @@ dm9000_open(struct net_device *dev) irqflags |= IRQF_SHARED; - if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) - return -EAGAIN; - /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ mdelay(1); /* delay needs by DM9000B */ @@ -1168,6 +1165,9 @@ dm9000_open(struct net_device *dev) dm9000_reset(db); dm9000_init_dm9000(dev); + if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) + return -EAGAIN; + /* Init driver variable */ db->dbug_cnt = 0; diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 7a84e45487e8..7583a9572bcc 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -105,7 +105,7 @@ static int do_pd_setup(struct fs_enet_private *fep) goto out_ep; fep->fcc.mem = (void __iomem *)cpm2_immr; - fpi->dpram_offset = cpm_dpalloc(128, 8); + fpi->dpram_offset = cpm_dpalloc(128, 32); if (IS_ERR_VALUE(fpi->dpram_offset)) { ret = fpi->dpram_offset; goto out_fcccp; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index ff60b23a5b74..2dfcc8047847 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -10,7 +10,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com> * - * Copyright 2002-2009 Freescale Semiconductor, Inc. + * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc. * Copyright 2007 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it @@ -476,9 +476,6 @@ static const struct net_device_ops gfar_netdev_ops = { #endif }; -unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; -unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; - void lock_rx_qs(struct gfar_private *priv) { int i = 0x0; @@ -868,28 +865,28 @@ static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar, rqfar--; rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT; - ftp_rqfpr[rqfar] = rqfpr; - ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_NOMATCH; - ftp_rqfpr[rqfar] = rqfpr; - ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND; rqfpr = class; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND; rqfpr = class; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); return rqfar; @@ -904,8 +901,8 @@ static void gfar_init_filer_table(struct gfar_private *priv) /* Default rule */ rqfcr = RQFCR_CMP_MATCH; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6); @@ -921,8 +918,8 @@ static void gfar_init_filer_table(struct gfar_private *priv) /* Rest are masked rules */ rqfcr = RQFCR_CMP_NOMATCH; for (i = 0; i < rqfar; i++) { - ftp_rqfcr[i] = rqfcr; - ftp_rqfpr[i] = rqfpr; + priv->ftp_rqfcr[i] = rqfcr; + priv->ftp_rqfpr[i] = rqfpr; gfar_write_filer(priv, i, rqfcr, rqfpr); } } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index fc86f5195445..ba36dc7a3435 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -9,7 +9,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com> * - * Copyright 2002-2009 Freescale Semiconductor, Inc. + * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -1107,10 +1107,12 @@ struct gfar_private { /* HW time stamping enabled flag */ int hwts_rx_en; int hwts_tx_en; + + /*Filer table*/ + unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; + unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; }; -extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; -extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; static inline int gfar_has_errata(struct gfar_private *priv, enum gfar_errata err) diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 493d743839d9..239e3330495f 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -9,7 +9,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com> * - * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2003-2006, 2008-2009, 2011 Freescale Semiconductor, Inc. * * This software may be used and distributed according to * the terms of the GNU Public License, Version 2, incorporated herein @@ -609,15 +609,15 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L2DA) { fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -626,16 +626,16 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; priv->cur_filer_idx = priv->cur_filer_idx - 1; } if (ethflow & RXH_IP_SRC) { fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -643,8 +643,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & (RXH_IP_DST)) { fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -652,8 +652,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L3_PROTO) { fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -661,8 +661,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L4_B_0_1) { fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -670,8 +670,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L4_B_2_3) { fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -705,12 +705,12 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u } for (i = 0; i < MAX_FILER_IDX + 1; i++) { - local_rqfpr[j] = ftp_rqfpr[i]; - local_rqfcr[j] = ftp_rqfcr[i]; + local_rqfpr[j] = priv->ftp_rqfpr[i]; + local_rqfcr[j] = priv->ftp_rqfcr[i]; j--; - if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE | + if ((priv->ftp_rqfcr[i] == (RQFCR_PID_PARSE | RQFCR_CLE |RQFCR_AND)) && - (ftp_rqfpr[i] == cmp_rqfpr)) + (priv->ftp_rqfpr[i] == cmp_rqfpr)) break; } @@ -724,20 +724,22 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u * if it was already programmed, we need to overwrite these rules */ for (l = i+1; l < MAX_FILER_IDX; l++) { - if ((ftp_rqfcr[l] & RQFCR_CLE) && - !(ftp_rqfcr[l] & RQFCR_AND)) { - ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT | + if ((priv->ftp_rqfcr[l] & RQFCR_CLE) && + !(priv->ftp_rqfcr[l] & RQFCR_AND)) { + priv->ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT | RQFCR_HASHTBL_0 | RQFCR_PID_MASK; - ftp_rqfpr[l] = FPR_FILER_MASK; - gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]); + priv->ftp_rqfpr[l] = FPR_FILER_MASK; + gfar_write_filer(priv, l, priv->ftp_rqfcr[l], + priv->ftp_rqfpr[l]); break; } - if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND)) + if (!(priv->ftp_rqfcr[l] & RQFCR_CLE) && + (priv->ftp_rqfcr[l] & RQFCR_AND)) continue; else { - local_rqfpr[j] = ftp_rqfpr[l]; - local_rqfcr[j] = ftp_rqfcr[l]; + local_rqfpr[j] = priv->ftp_rqfpr[l]; + local_rqfcr[j] = priv->ftp_rqfcr[l]; j--; } } @@ -750,8 +752,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u /* Write back the popped out rules again */ for (k = j+1; k < MAX_FILER_IDX; k++) { - ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k]; - ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k]; + priv->ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k]; + priv->ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k]; gfar_write_filer(priv, priv->cur_filer_idx, local_rqfcr[k], local_rqfpr[k]); if (!priv->cur_filer_idx) diff --git a/drivers/net/greth.c b/drivers/net/greth.c index f181304a7ab6..672f096fe090 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1015,11 +1015,10 @@ static int greth_set_mac_add(struct net_device *dev, void *p) return -EINVAL; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]); + GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | + dev->dev_addr[4] << 8 | dev->dev_addr[5]); - GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]); - GRETH_REGSAVE(regs->esa_lsb, - addr->sa_data[2] << 24 | addr-> - sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]); return 0; } diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 992089639ea4..0d283781bc5e 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -456,7 +456,7 @@ out: * a block of 6pack data has been received, which can now be decapsulated * and sent on to some IP layer for further processing. */ -static unsigned int sixpack_receive_buf(struct tty_struct *tty, +static void sixpack_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct sixpack *sp; @@ -464,11 +464,11 @@ static unsigned int sixpack_receive_buf(struct tty_struct *tty, int count1; if (!count) - return 0; + return; sp = sp_get(tty); if (!sp) - return -ENODEV; + return; memcpy(buf, cp, count < sizeof(buf) ? count : sizeof(buf)); @@ -487,8 +487,6 @@ static unsigned int sixpack_receive_buf(struct tty_struct *tty, sp_put(sp); tty_unthrottle(tty); - - return count1; } /* @@ -694,10 +692,10 @@ static void sixpack_close(struct tty_struct *tty) { struct sixpack *sp; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); sp = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!sp) return; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 0e4f23531140..bc02968cee16 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -813,10 +813,10 @@ static void mkiss_close(struct tty_struct *tty) { struct mkiss *ax; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); ax = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!ax) return; @@ -923,14 +923,13 @@ static long mkiss_compat_ioctl(struct tty_struct *tty, struct file *file, * a block of data has been received, which can now be decapsulated * and sent on to the AX.25 layer for further processing. */ -static unsigned int mkiss_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct mkiss *ax = mkiss_get(tty); - int bytes = count; if (!ax) - return -ENODEV; + return; /* * Argh! mtu change time! - costs us the packet part received @@ -940,7 +939,7 @@ static unsigned int mkiss_receive_buf(struct tty_struct *tty, ax_changedmtu(ax); /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp != NULL && *fp++) { if (!test_and_set_bit(AXF_ERROR, &ax->flags)) ax->dev->stats.rx_errors++; @@ -953,8 +952,6 @@ static unsigned int mkiss_receive_buf(struct tty_struct *tty, mkiss_put(ax); tty_unthrottle(tty); - - return count; } /* diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index c52a1df5d922..c3ecb118c1df 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -188,14 +188,14 @@ struct hp100_private { * variables */ #ifdef CONFIG_ISA -static const char *const hp100_isa_tbl[] __devinitconst = { +static const char *hp100_isa_tbl[] = { "HWPF150", /* HP J2573 rev A */ "HWP1950", /* HP J2573 */ }; #endif #ifdef CONFIG_EISA -static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = { +static struct eisa_device_id hp100_eisa_tbl[] = { { "HWPF180" }, /* HP J2577 rev A */ { "HWP1920" }, /* HP 27248B */ { "HWP1940" }, /* HP J2577 */ @@ -336,7 +336,7 @@ static __devinit const char *hp100_read_id(int ioaddr) } #ifdef CONFIG_ISA -static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr) +static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) { const char *sig; int i; @@ -372,7 +372,7 @@ static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr) * EISA and PCI are handled by device infrastructure. */ -static int __devinit hp100_isa_probe(struct net_device *dev, int addr) +static int __init hp100_isa_probe(struct net_device *dev, int addr) { int err = -ENODEV; @@ -396,7 +396,7 @@ static int __devinit hp100_isa_probe(struct net_device *dev, int addr) #endif /* CONFIG_ISA */ #if !defined(MODULE) && defined(CONFIG_ISA) -struct net_device * __devinit hp100_probe(int unit) +struct net_device * __init hp100_probe(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); int err; @@ -1580,12 +1580,12 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb, hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */ lp->txrcommit++; - spin_unlock_irqrestore(&lp->lock, flags); - /* Update statistics */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; + spin_unlock_irqrestore(&lp->lock, flags); + return NETDEV_TX_OK; drop: @@ -2843,7 +2843,7 @@ static void cleanup_dev(struct net_device *d) } #ifdef CONFIG_EISA -static int __devinit hp100_eisa_probe (struct device *gendev) +static int __init hp100_eisa_probe (struct device *gendev) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); struct eisa_device *edev = to_eisa_device(gendev); diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c index b6060f7538df..a900d5bf2948 100644 --- a/drivers/net/hplance.c +++ b/drivers/net/hplance.c @@ -135,7 +135,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d) } /* Initialise a single lance board at the given DIO device */ -static void __init hplance_init(struct net_device *dev, struct dio_dev *d) +static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d) { unsigned long va = (d->resource.start + DIO_VIRADDRBASE); struct hplance_private *lp; diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 136d7544cc33..a7d6cad32953 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -895,12 +895,12 @@ static int ibmlana_irq; static int ibmlana_io; static int startslot; /* counts through slots when probing multiple devices */ -static const short ibmlana_adapter_ids[] __devinitconst = { +static short ibmlana_adapter_ids[] __initdata = { IBM_LANA_ID, 0x0000 }; -static const char *const ibmlana_adapter_names[] __devinitconst = { +static char *ibmlana_adapter_names[] __devinitdata = { "IBM LAN Adapter/A", NULL }; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 18fccf913635..2c28621eb30b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2373,6 +2373,9 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) } #endif /* CONFIG_PCI_IOV */ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus()); + /* i350 cannot do RSS and SR-IOV at the same time */ + if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count) + adapter->rss_queues = 1; /* * if rss_queues > 4 or vfs are going to be allocated with rss_queues diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 035861d8acb1..3352b2443e58 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -216,23 +216,23 @@ static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t * usbserial: urb-complete-interrupt / softint */ -static unsigned int irtty_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct sir_dev *dev; struct sirtty_cb *priv = tty->disc_data; int i; - IRDA_ASSERT(priv != NULL, return -ENODEV;); - IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EINVAL;); + IRDA_ASSERT(priv != NULL, return;); + IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;); if (unlikely(count==0)) /* yes, this happens */ - return 0; + return; dev = priv->dev; if (!dev) { IRDA_WARNING("%s(), not ready yet!\n", __func__); - return -ENODEV; + return; } for (i = 0; i < count; i++) { @@ -242,13 +242,11 @@ static unsigned int irtty_receive_buf(struct tty_struct *tty, if (fp && *fp++) { IRDA_DEBUG(0, "Framing or parity error!\n"); sirdev_receive(dev, NULL, 0); /* notify sir_dev (updating stats) */ - return -EINVAL; + return; } } sirdev_receive(dev, cp, count); - - return count; } /* diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 69b5707db369..8800e1fe4129 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -222,19 +222,19 @@ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 s static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); /* Probing */ -static int smsc_ircc_look_for_chips(void); -static const struct smsc_chip * smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); -static int smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int smsc_superio_fdc(unsigned short cfg_base); -static int smsc_superio_lpc(unsigned short cfg_base); +static int __init smsc_ircc_look_for_chips(void); +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); +static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); +static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); +static int __init smsc_superio_fdc(unsigned short cfg_base); +static int __init smsc_superio_lpc(unsigned short cfg_base); #ifdef CONFIG_PCI -static int preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); -static int preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static void preconfigure_ali_port(struct pci_dev *dev, +static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); +static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); +static void __init preconfigure_ali_port(struct pci_dev *dev, unsigned short port); -static int preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static int smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, +static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); +static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, unsigned short ircc_fir, unsigned short ircc_sir, unsigned char ircc_dma, @@ -366,7 +366,7 @@ static inline void register_bank(int iobase, int bank) } /* PNP hotplug support */ -static const struct pnp_device_id smsc_ircc_pnp_table[] __devinitconst = { +static const struct pnp_device_id smsc_ircc_pnp_table[] = { { .id = "SMCf010", .driver_data = 0 }, /* and presumably others */ { } @@ -515,7 +515,7 @@ static const struct net_device_ops smsc_ircc_netdev_ops = { * Try to open driver instance * */ -static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) +static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) { struct smsc_ircc_cb *self; struct net_device *dev; @@ -2273,7 +2273,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho } -static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg) +static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { IRDA_DEBUG(1, "%s\n", __func__); @@ -2281,7 +2281,7 @@ static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg) return inb(cfg_base) != reg ? -1 : 0; } -static const struct smsc_chip * __devinit smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) { u8 devid, xdevid, rev; @@ -2406,7 +2406,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) #ifdef CONFIG_PCI #define PCIID_VENDOR_INTEL 0x8086 #define PCIID_VENDOR_ALI 0x10b9 -static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitconst = { +static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { /* * Subsystems needing entries: * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family @@ -2532,7 +2532,7 @@ static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] * (FIR port, SIR port, FIR DMA, FIR IRQ) * through the chip configuration port. */ -static int __devinit preconfigure_smsc_chip(struct +static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf) { @@ -2633,7 +2633,7 @@ static int __devinit preconfigure_smsc_chip(struct * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. * They all work the same way! */ -static int __devinit preconfigure_through_82801(struct pci_dev *dev, +static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf) @@ -2786,7 +2786,7 @@ static int __devinit preconfigure_through_82801(struct pci_dev *dev, * This is based on reverse-engineering since ALi does not * provide any data sheet for the 1533 chip. */ -static void __devinit preconfigure_ali_port(struct pci_dev *dev, +static void __init preconfigure_ali_port(struct pci_dev *dev, unsigned short port) { unsigned char reg; @@ -2824,7 +2824,7 @@ static void __devinit preconfigure_ali_port(struct pci_dev *dev, IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port); } -static int __devinit preconfigure_through_ali(struct pci_dev *dev, +static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf) @@ -2837,7 +2837,7 @@ static int __devinit preconfigure_through_ali(struct pci_dev *dev, return preconfigure_smsc_chip(conf); } -static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, +static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, unsigned short ircc_fir, unsigned short ircc_sir, unsigned char ircc_dma, @@ -2849,7 +2849,7 @@ static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, int ret = 0; for_each_pci_dev(dev) { - const struct smsc_ircc_subsystem_configuration *conf; + struct smsc_ircc_subsystem_configuration *conf; /* * Cache the subsystem vendor/device: diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c index 4d40626b3bfa..fc12ac0d9f2e 100644 --- a/drivers/net/ks8842.c +++ b/drivers/net/ks8842.c @@ -661,7 +661,7 @@ static void ks8842_rx_frame(struct net_device *netdev, /* check the status */ if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) { - struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len); + struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len + 3); if (skb) { diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index b78be088c4ad..60f46bc2bf64 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -140,7 +140,7 @@ MODULE_LICENSE("GPL"); module_param(mtu, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); -module_param(dspcfg_workaround, int, 1); +module_param(dspcfg_workaround, int, 0); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); @@ -2028,8 +2028,8 @@ static void drain_rx(struct net_device *dev) np->rx_ring[i].cmd_status = 0; np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ if (np->rx_skbuff[i]) { - pci_unmap_single(np->pci_dev, - np->rx_dma[i], buflen, + pci_unmap_single(np->pci_dev, np->rx_dma[i], + buflen + NATSEMI_PADDING, PCI_DMA_FROMDEVICE); dev_kfree_skb(np->rx_skbuff[i]); } @@ -2360,7 +2360,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) PCI_DMA_FROMDEVICE); } else { pci_unmap_single(np->pci_dev, np->rx_dma[entry], - buflen, PCI_DMA_FROMDEVICE); + buflen + NATSEMI_PADDING, + PCI_DMA_FROMDEVICE); skb_put(skb = np->rx_skbuff[entry], pkt_len); np->rx_skbuff[entry] = NULL; } diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c index e8984b0ca521..243ed2aee88e 100644 --- a/drivers/net/ne3210.c +++ b/drivers/net/ne3210.c @@ -80,20 +80,17 @@ static void ne3210_block_output(struct net_device *dev, int count, const unsigne #define NE3210_DEBUG 0x0 -static const unsigned char irq_map[] __devinitconst = - { 15, 12, 11, 10, 9, 7, 5, 3 }; -static const unsigned int shmem_map[] __devinitconst = - { 0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0 }; -static const char *const ifmap[] __devinitconst = - { "UTP", "?", "BNC", "AUI" }; -static const int ifmap_val[] __devinitconst = { +static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; +static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0}; +static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"}; +static int ifmap_val[] __initdata = { IF_PORT_10BASET, IF_PORT_UNKNOWN, IF_PORT_10BASE2, IF_PORT_AUI, }; -static int __devinit ne3210_eisa_probe (struct device *device) +static int __init ne3210_eisa_probe (struct device *device) { unsigned long ioaddr, phys_mem; int i, retval, port_index; @@ -316,7 +313,7 @@ static void ne3210_block_output(struct net_device *dev, int count, memcpy_toio(shmem, buf, count); } -static const struct eisa_device_id ne3210_ids[] __devinitconst = { +static struct eisa_device_id ne3210_ids[] = { { "EGL0101" }, { "NVL1801" }, { "" }, diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b644383017f9..c0788a31ff0f 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1965,11 +1965,11 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netxen_tso_check(netdev, tx_ring, first_desc, skb); - netxen_nic_update_cmd_producer(adapter, tx_ring); - adapter->stats.txbytes += skb->len; adapter->stats.xmitcalled++; + netxen_nic_update_cmd_producer(adapter, tx_ring); + return NETDEV_TX_OK; drop_packet: diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 392a6c4b72e5..a70244306c94 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -58,6 +58,7 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX ---help--- Currently supports the 6348 and 6358 PHYs. diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index b0c9522bb535..2cd8dc5847b4 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -543,11 +543,20 @@ static void recalibrate(struct dp83640_clock *clock) /* time stamping methods */ -static void decode_evnt(struct dp83640_private *dp83640, - struct phy_txts *phy_txts, u16 ests) +static int decode_evnt(struct dp83640_private *dp83640, + void *data, u16 ests) { + struct phy_txts *phy_txts; struct ptp_clock_event event; int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK; + u16 ext_status = 0; + + if (ests & MULT_EVNT) { + ext_status = *(u16 *) data; + data += sizeof(ext_status); + } + + phy_txts = data; switch (words) { /* fall through in every case */ case 3: @@ -565,6 +574,9 @@ static void decode_evnt(struct dp83640_private *dp83640, event.timestamp = phy2txts(&dp83640->edata); ptp_clock_event(dp83640->clock->ptp_clock, &event); + + words = ext_status ? words + 2 : words + 1; + return words * sizeof(u16); } static void decode_rxts(struct dp83640_private *dp83640, @@ -643,9 +655,7 @@ static void decode_status_frame(struct dp83640_private *dp83640, } else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) { - phy_txts = (struct phy_txts *) ptr; - decode_evnt(dp83640, phy_txts, ests); - size = sizeof(*phy_txts); + size = decode_evnt(dp83640, ptr, ests); } else { size = 0; @@ -1034,8 +1044,8 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); - /* Let the stack drop this frame. */ - return false; + kfree_skb(skb); + return true; } SKB_PTP_TYPE(skb) = type; diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 53872d7d7382..c554a397e558 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -340,7 +340,7 @@ ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait) } /* May sleep, don't call from interrupt level or with interrupts disabled */ -static unsigned int +static void ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -348,7 +348,7 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, unsigned long flags; if (!ap) - return -ENODEV; + return; spin_lock_irqsave(&ap->recv_lock, flags); ppp_async_input(ap, buf, cflags, count); spin_unlock_irqrestore(&ap->recv_lock, flags); @@ -356,8 +356,6 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, tasklet_schedule(&ap->tsk); ap_put(ap); tty_unthrottle(tty); - - return count; } static void @@ -525,7 +523,7 @@ static void ppp_async_process(unsigned long arg) #define PUT_BYTE(ap, buf, c, islcp) do { \ if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\ *buf++ = PPP_ESCAPE; \ - *buf++ = c ^ 0x20; \ + *buf++ = c ^ PPP_TRANS; \ } else \ *buf++ = c; \ } while (0) @@ -898,7 +896,7 @@ ppp_async_input(struct asyncppp *ap, const unsigned char *buf, sp = skb_put(skb, n); memcpy(sp, buf, n); if (ap->state & SC_ESCAPE) { - sp[0] ^= 0x20; + sp[0] ^= PPP_TRANS; ap->state &= ~SC_ESCAPE; } } diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c index 31e9407a0739..1dbdf82a6dfd 100644 --- a/drivers/net/ppp_deflate.c +++ b/drivers/net/ppp_deflate.c @@ -305,7 +305,7 @@ static void z_decomp_free(void *arg) if (state) { zlib_inflateEnd(&state->strm); - kfree(state->strm.workspace); + vfree(state->strm.workspace); kfree(state); } } @@ -345,8 +345,7 @@ static void *z_decomp_alloc(unsigned char *options, int opt_len) state->w_size = w_size; state->strm.next_out = NULL; - state->strm.workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL|__GFP_REPEAT); + state->strm.workspace = vmalloc(zlib_inflate_workspacesize()); if (state->strm.workspace == NULL) goto out_free; diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 0815790a5cf9..2573f525f11c 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -381,7 +381,7 @@ ppp_sync_poll(struct tty_struct *tty, struct file *file, poll_table *wait) } /* May sleep, don't call from interrupt level or with interrupts disabled */ -static unsigned int +static void ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -389,7 +389,7 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, unsigned long flags; if (!ap) - return -ENODEV; + return; spin_lock_irqsave(&ap->recv_lock, flags); ppp_sync_input(ap, buf, cflags, count); spin_unlock_irqrestore(&ap->recv_lock, flags); @@ -397,8 +397,6 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, tasklet_schedule(&ap->tsk); sp_put(ap); tty_unthrottle(tty); - - return count; } static void diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 89f7540d90f9..5f597ca592bb 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -1273,7 +1273,7 @@ static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) wmb(); wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD); - stats->tx_bytes += skb->len; + stats->tx_bytes += length; stats->tx_packets++; dev->trans_start = jiffies; if (pep->tx_ring_size - pep->tx_desc_count <= 1) { diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c index e9656616f2a2..a5d9fbf9d816 100644 --- a/drivers/net/qlcnic/qlcnic_hw.c +++ b/drivers/net/qlcnic/qlcnic_hw.c @@ -1406,6 +1406,7 @@ qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry, for (loop = 0; loop < que->no_ops; loop++) { QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id); + addr = que->read_addr; for (i = 0; i < cnt; i++) { QLCNIC_RD_DUMP_REG(addr, base, &data); *buffer++ = cpu_to_le32(data); diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c index 3ab7d2c7baf2..0f6af5c61a7c 100644 --- a/drivers/net/qlcnic/qlcnic_main.c +++ b/drivers/net/qlcnic/qlcnic_main.c @@ -2159,6 +2159,7 @@ qlcnic_unmap_buffers(struct pci_dev *pdev, struct sk_buff *skb, nf = &pbuf->frag_array[0]; pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE); + pbuf->skb = NULL; } static inline void diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index d32850715f5c..ca306fd5f588 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -16,7 +16,7 @@ */ #define DRV_NAME "qlge" #define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver " -#define DRV_VERSION "v1.00.00.27.00.00-01" +#define DRV_VERSION "v1.00.00.29.00.00-01" #define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */ @@ -1996,6 +1996,7 @@ enum { QL_LB_LINK_UP = 10, QL_FRC_COREDUMP = 11, QL_EEH_FATAL = 12, + QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */ }; /* link_status bit definitions */ diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 930ae45457bb..6b4ff970972b 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -2152,6 +2152,10 @@ void ql_queue_asic_error(struct ql_adapter *qdev) * thread */ clear_bit(QL_ADAPTER_UP, &qdev->flags); + /* Set asic recovery bit to indicate reset process that we are + * in fatal error recovery process rather than normal close + */ + set_bit(QL_ASIC_RECOVERY, &qdev->flags); queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); } @@ -2166,23 +2170,20 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev, return; case CAM_LOOKUP_ERR_EVENT: - netif_err(qdev, link, qdev->ndev, - "Multiple CAM hits lookup occurred.\n"); - netif_err(qdev, drv, qdev->ndev, - "This event shouldn't occur.\n"); + netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n"); + netdev_err(qdev->ndev, "This event shouldn't occur.\n"); ql_queue_asic_error(qdev); return; case SOFT_ECC_ERROR_EVENT: - netif_err(qdev, rx_err, qdev->ndev, - "Soft ECC error detected.\n"); + netdev_err(qdev->ndev, "Soft ECC error detected.\n"); ql_queue_asic_error(qdev); break; case PCI_ERR_ANON_BUF_RD: - netif_err(qdev, rx_err, qdev->ndev, - "PCI error occurred when reading anonymous buffers from rx_ring %d.\n", - ib_ae_rsp->q_id); + netdev_err(qdev->ndev, "PCI error occurred when reading " + "anonymous buffers from rx_ring %d.\n", + ib_ae_rsp->q_id); ql_queue_asic_error(qdev); break; @@ -2437,11 +2438,10 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) */ if (var & STS_FE) { ql_queue_asic_error(qdev); - netif_err(qdev, intr, qdev->ndev, - "Got fatal error, STS = %x.\n", var); + netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var); var = ql_read32(qdev, ERR_STS); - netif_err(qdev, intr, qdev->ndev, - "Resetting chip. Error Status Register = 0x%x\n", var); + netdev_err(qdev->ndev, "Resetting chip. " + "Error Status Register = 0x%x\n", var); return IRQ_HANDLED; } @@ -3818,11 +3818,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); - /* Stop management traffic. */ - ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + /* Check if bit is set then skip the mailbox command and + * clear the bit, else we are in normal reset process. + */ + if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) { + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); - /* Wait for the NIC and MGMNT FIFOs to empty. */ - ql_wait_fifo_empty(qdev); + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + } else + clear_bit(QL_ASIC_RECOVERY, &qdev->flags); ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ef1ce2ebeb4a..5990621fb5cd 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -742,7 +742,7 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd) msleep(2); for (i = 0; i < 5; i++) { udelay(100); - if (!(RTL_R32(ERIDR) & ERIAR_FLAG)) + if (!(RTL_R32(ERIAR) & ERIAR_FLAG)) break; } @@ -1621,7 +1621,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, * * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec */ - static const struct { + static const struct rtl_mac_info { u32 mask; u32 val; int mac_version; @@ -1689,7 +1689,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, /* Catch-all */ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE } - }, *p = mac_info; + }; + const struct rtl_mac_info *p = mac_info; u32 reg; reg = RTL_R32(TxConfig); @@ -3681,7 +3682,7 @@ static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { - static const struct { + static const struct rtl_cfg2_info { u32 mac_version; u32 clk; u32 val; @@ -3690,7 +3691,8 @@ static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff }, { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff } - }, *p = cfg2_info; + }; + const struct rtl_cfg2_info *p = cfg2_info; unsigned int i; u32 clk; diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 77c5092a6a40..5d3436d47edd 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -378,7 +378,7 @@ static int rionet_close(struct net_device *ndev) static void rionet_remove(struct rio_dev *rdev) { - struct net_device *ndev = NULL; + struct net_device *ndev = rio_get_drvdata(rdev); struct rionet_peer *peer, *tmp; free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? @@ -433,22 +433,12 @@ static const struct net_device_ops rionet_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; -static int rionet_setup_netdev(struct rio_mport *mport) +static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) { int rc = 0; - struct net_device *ndev = NULL; struct rionet_private *rnet; u16 device_id; - /* Allocate our net_device structure */ - ndev = alloc_etherdev(sizeof(struct rionet_private)); - if (ndev == NULL) { - printk(KERN_INFO "%s: could not allocate ethernet device.\n", - DRV_NAME); - rc = -ENOMEM; - goto out; - } - rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL, mport->sys_size ? __fls(sizeof(void *)) + 4 : 0); if (!rionet_active) { @@ -504,11 +494,21 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) int rc = -ENODEV; u32 lpef, lsrc_ops, ldst_ops; struct rionet_peer *peer; + struct net_device *ndev = NULL; /* If local device is not rionet capable, give up quickly */ if (!rionet_capable) goto out; + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct rionet_private)); + if (ndev == NULL) { + printk(KERN_INFO "%s: could not allocate ethernet device.\n", + DRV_NAME); + rc = -ENOMEM; + goto out; + } + /* * First time through, make sure local device is rionet * capable, setup netdev, and set flags so this is skipped @@ -529,7 +529,7 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) goto out; } - rc = rionet_setup_netdev(rdev->net->hport); + rc = rionet_setup_netdev(rdev->net->hport, ndev); rionet_check = 1; } @@ -546,6 +546,8 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) list_add_tail(&peer->node, &rionet_peers); } + rio_set_drvdata(rdev, ndev); + out: return rc; } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 8a72a979ee71..1f3f7b4dd638 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -140,6 +140,8 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .tpauser = 1, .hw_swap = 1, .no_ade = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, }; #define SH_GIGA_ETH_BASE 0xfee00000 @@ -1184,8 +1186,8 @@ static void sh_eth_adjust_link(struct net_device *ndev) mdp->cd->set_rate(ndev); } if (mdp->link == PHY_DOWN) { - sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF) - | ECMR_DM, ECMR); + sh_eth_write(ndev, + (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; } diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 584809c656d5..2f110fb30daa 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -182,11 +182,11 @@ static int sl_alloc_bufs(struct slip *sl, int mtu) #ifdef SL_INCLUDE_CSLIP cbuff = xchg(&sl->cbuff, cbuff); slcomp = xchg(&sl->slcomp, slcomp); +#endif #ifdef CONFIG_SLIP_MODE_SLIP6 sl->xdata = 0; sl->xbits = 0; #endif -#endif spin_unlock_bh(&sl->lock); err = 0; @@ -670,17 +670,16 @@ static void sl_setup(struct net_device *dev) * in parallel */ -static unsigned int slip_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct slip *sl = tty->disc_data; - int bytes = count; if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) - return -ENODEV; + return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -694,8 +693,6 @@ static unsigned int slip_receive_buf(struct tty_struct *tty, #endif slip_unesc(sl, *cp++); } - - return count; } /************************************ diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c index 0f29f261fcfe..d07c39cb4daf 100644 --- a/drivers/net/smc-mca.c +++ b/drivers/net/smc-mca.c @@ -156,7 +156,7 @@ static const struct { { 14, 15 } }; -static const short smc_mca_adapter_ids[] __devinitconst = { +static short smc_mca_adapter_ids[] __initdata = { 0x61c8, 0x61c9, 0x6fc0, @@ -168,7 +168,7 @@ static const short smc_mca_adapter_ids[] __devinitconst = { 0x0000 }; -static const char *const smc_mca_adapter_names[] __devinitconst = { +static char *smc_mca_adapter_names[] __initdata = { "SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)", "SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)", "WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)", @@ -199,7 +199,7 @@ static const struct net_device_ops ultramca_netdev_ops = { #endif }; -static int __devinit ultramca_probe(struct device *gen_dev) +static int __init ultramca_probe(struct device *gen_dev) { unsigned short ioaddr; struct net_device *dev; diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index dc4805f473e3..f6285748bd3c 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2400,8 +2400,10 @@ static const struct of_device_id smc91x_match[] = { { .compatible = "smsc,lan91c94", }, { .compatible = "smsc,lan91c111", }, {}, -} +}; MODULE_DEVICE_TABLE(of, smc91x_match); +#else +#define smc91x_match NULL #endif static struct dev_pm_ops smc_drv_pm_ops = { @@ -2416,9 +2418,7 @@ static struct platform_driver smc_driver = { .name = CARDNAME, .owner = THIS_MODULE, .pm = &smc_drv_pm_ops, -#ifdef CONFIG_OF .of_match_table = smc91x_match, -#endif }, }; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f4b01c638a33..a1f9f9eef37d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -5774,7 +5774,7 @@ static void tg3_skb_error_unmap(struct tg3_napi *tnapi, dma_unmap_addr(txb, mapping), skb_headlen(skb), PCI_DMA_TODEVICE); - for (i = 0; i <= last; i++) { + for (i = 0; i < last; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; entry = NEXT_TX(entry); diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 1313aa1315f0..2bedc0ace812 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -727,7 +727,7 @@ static int __devexit madgemc_remove(struct device *device) return 0; } -static const short madgemc_adapter_ids[] __devinitconst = { +static short madgemc_adapter_ids[] __initdata = { 0x002d, 0x0000 }; diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 45144d5bd11b..efaa1d69b720 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -1995,7 +1995,7 @@ SetMulticastFilter(struct net_device *dev) static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; -static int __devinit de4x5_eisa_probe (struct device *gendev) +static int __init de4x5_eisa_probe (struct device *gendev) { struct eisa_device *edev; u_long iobase; @@ -2097,7 +2097,7 @@ static int __devexit de4x5_eisa_remove (struct device *device) return 0; } -static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = { +static struct eisa_device_id de4x5_eisa_ids[] = { { "DEC4250", 0 }, /* 0 is the board name index... */ { "" } }; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74e94054ab1a..5235f48be1be 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -460,7 +460,23 @@ static u32 tun_net_fix_features(struct net_device *dev, u32 features) return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); } - +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are syncronous operations, we are guaranteed + * never to have pending data when we poll for it + * so theres nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif static const struct net_device_ops tun_netdev_ops = { .ndo_uninit = tun_net_uninit, .ndo_open = tun_net_open, @@ -468,6 +484,9 @@ static const struct net_device_ops tun_netdev_ops = { .ndo_start_xmit = tun_net_xmit, .ndo_change_mtu = tun_net_change_mtu, .ndo_fix_features = tun_net_fix_features, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; static const struct net_device_ops tap_netdev_ops = { @@ -480,6 +499,9 @@ static const struct net_device_ops tap_netdev_ops = { .ndo_set_multicast_list = tun_net_mclist, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; /* Initialize net device. */ diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 9d4f9117260f..84d4608153c9 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -385,6 +385,16 @@ config USB_NET_CX82310_ETH router with USB ethernet port. This driver is for routers only, it will not work with ADSL modems (use cxacru driver instead). +config USB_NET_KALMIA + tristate "Samsung Kalmia based LTE USB modem" + depends on USB_USBNET + help + Choose this option if you have a Samsung Kalmia based USB modem + as Samsung GT-B3730. + + To compile this driver as a module, choose M here: the + module will be called kalmia. + config USB_HSO tristate "Option USB High Speed Mobile Devices" depends on USB && RFKILL diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index c7ec8a5f0a90..c203fa21f6b1 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o +obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o obj-$(CONFIG_USB_IPHETH) += ipheth.o obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index d7221c4a5dcf..8056f8a27c6a 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -495,7 +495,7 @@ static void catc_ctrl_run(struct catc *catc) if (!q->dir && q->buf && q->len) memcpy(catc->ctrl_buf, q->buf, q->len); - if ((status = usb_submit_urb(catc->ctrl_urb, GFP_KERNEL))) + if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC))) err("submit(ctrl_urb) status %d", status); } diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index cdd3ae486109..f33ca6aa29e9 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -54,7 +54,7 @@ #include <linux/usb/usbnet.h> #include <linux/usb/cdc.h> -#define DRIVER_VERSION "24-May-2011" +#define DRIVER_VERSION "01-June-2011" /* CDC NCM subclass 3.2.1 */ #define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 @@ -1234,6 +1234,7 @@ static struct usb_driver cdc_ncm_driver = { .disconnect = cdc_ncm_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .reset_resume = usbnet_resume, .supports_autosuspend = 1, }; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 387ca43f26f4..304fe78ff60e 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2421,10 +2421,8 @@ static void hso_free_net_device(struct hso_device *hso_dev) remove_net_device(hso_net->parent); - if (hso_net->net) { + if (hso_net->net) unregister_netdev(hso_net->net); - free_netdev(hso_net->net); - } /* start freeing */ for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { @@ -2436,6 +2434,9 @@ static void hso_free_net_device(struct hso_device *hso_dev) kfree(hso_net->mux_bulk_tx_buf); hso_net->mux_bulk_tx_buf = NULL; + if (hso_net->net) + free_netdev(hso_net->net); + kfree(hso_dev); } diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c new file mode 100644 index 000000000000..a9b6c63d54e4 --- /dev/null +++ b/drivers/net/usb/kalmia.c @@ -0,0 +1,392 @@ +/* + * USB network interface driver for Samsung Kalmia based LTE USB modem like the + * Samsung GT-B3730 and GT-B3710. + * + * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com> + * + * Sponsored by Quicklink Video Distribution Services Ltd. + * + * Based on the cdc_eem module. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ctype.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> +#include <linux/gfp.h> + +/* + * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control + * handled by the "option" module and an ethernet data port handled by this + * module. + * + * The stick must first be switched into modem mode by usb_modeswitch + * or similar tool. Then the modem gets sent two initialization packets by + * this module, which gives the MAC address of the device. User space can then + * connect the modem using AT commands through the ACM port and then use + * DHCP on the network interface exposed by this module. Network packets are + * sent to and from the modem in a proprietary format discovered after watching + * the behavior of the windows driver for the modem. + * + * More information about the use of the modem is available in usb_modeswitch + * forum and the project page: + * + * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 + * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver + */ + +/* #define DEBUG */ +/* #define VERBOSE */ + +#define KALMIA_HEADER_LENGTH 6 +#define KALMIA_ALIGN_SIZE 4 +#define KALMIA_USB_TIMEOUT 10000 + +/*-------------------------------------------------------------------------*/ + +static int +kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len, + u8 *buffer, u8 expected_len) +{ + int act_len; + int status; + + netdev_dbg(dev->net, "Sending init packet"); + + status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02), + init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT); + if (status != 0) { + netdev_err(dev->net, + "Error sending init packet. Status %i, length %i\n", + status, act_len); + return status; + } + else if (act_len != init_msg_len) { + netdev_err(dev->net, + "Did not send all of init packet. Bytes sent: %i", + act_len); + } + else { + netdev_dbg(dev->net, "Successfully sent init packet."); + } + + status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81), + buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT); + + if (status != 0) + netdev_err(dev->net, + "Error receiving init result. Status %i, length %i\n", + status, act_len); + else if (act_len != expected_len) + netdev_err(dev->net, "Unexpected init result length: %i\n", + act_len); + + return status; +} + +static int +kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) +{ + const static char init_msg_1[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00 }; + const static char init_msg_2[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4, + 0x00, 0x00 }; + const static int buflen = 28; + char *usb_buf; + int status; + + usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL); + if (!usb_buf) + return -ENOMEM; + + memcpy(usb_buf, init_msg_1, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1) + / sizeof(init_msg_1[0]), usb_buf, 24); + if (status != 0) + return status; + + memcpy(usb_buf, init_msg_2, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2) + / sizeof(init_msg_2[0]), usb_buf, 28); + if (status != 0) + return status; + + memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN); + + kfree(usb_buf); + return status; +} + +static int +kalmia_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + u8 ethernet_addr[ETH_ALEN]; + + /* Don't bind to AT command interface */ + if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + return -EINVAL; + + dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK); + dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK); + dev->status = NULL; + + dev->net->hard_header_len += KALMIA_HEADER_LENGTH; + dev->hard_mtu = 1400; + dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing + + status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr); + + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN); + memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN); + + return status; +} + +static struct sk_buff * +kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 content_len; + unsigned char *header_start; + unsigned char ether_type_1, ether_type_2; + u8 remainder, padlen = 0; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom + >= KALMIA_HEADER_LENGTH)) + goto done; + + if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH + + KALMIA_ALIGN_SIZE)) { + skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH, + skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH, + KALMIA_ALIGN_SIZE, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + header_start = skb_push(skb, KALMIA_HEADER_LENGTH); + ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12]; + ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13]; + + netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1, + ether_type_2); + + /* According to empiric data for data packages */ + header_start[0] = 0x57; + header_start[1] = 0x44; + content_len = skb->len - KALMIA_HEADER_LENGTH; + + put_unaligned_le16(content_len, &header_start[2]); + header_start[4] = ether_type_1; + header_start[5] = ether_type_2; + + /* Align to 4 bytes by padding with zeros */ + remainder = skb->len % KALMIA_ALIGN_SIZE; + if (remainder > 0) { + padlen = KALMIA_ALIGN_SIZE - remainder; + memset(skb_put(skb, padlen), 0, padlen); + } + + netdev_dbg( + dev->net, + "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.", + content_len, padlen, header_start[0], header_start[1], + header_start[2], header_start[3], header_start[4], + header_start[5]); + + return skb; +} + +static int +kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. + */ + const static u8 HEADER_END_OF_USB_PACKET[] = + { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 }; + const static u8 EXPECTED_UNKNOWN_HEADER_1[] = + { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 }; + const static u8 EXPECTED_UNKNOWN_HEADER_2[] = + { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 }; + int i = 0; + + /* incomplete header? */ + if (skb->len < KALMIA_HEADER_LENGTH) + return 0; + + do { + struct sk_buff *skb2 = NULL; + u8 *header_start; + u16 usb_packet_length, ether_packet_length; + int is_last; + + header_start = skb->data; + + if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) { + if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1, + sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp( + header_start, EXPECTED_UNKNOWN_HEADER_2, + sizeof(EXPECTED_UNKNOWN_HEADER_2))) { + netdev_dbg( + dev->net, + "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + else { + netdev_err( + dev->net, + "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + return 0; + } + } + else + netdev_dbg( + dev->net, + "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], header_start[2], + header_start[3], header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + + /* subtract start header and end header */ + usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH); + ether_packet_length = get_unaligned_le16(&header_start[2]); + skb_pull(skb, KALMIA_HEADER_LENGTH); + + /* Some small packets misses end marker */ + if (usb_packet_length < ether_packet_length) { + ether_packet_length = usb_packet_length + + KALMIA_HEADER_LENGTH; + is_last = true; + } + else { + netdev_dbg(dev->net, "Correct package length #%i", i + + 1); + + is_last = (memcmp(skb->data + ether_packet_length, + HEADER_END_OF_USB_PACKET, + sizeof(HEADER_END_OF_USB_PACKET)) == 0); + if (!is_last) { + header_start = skb->data + ether_packet_length; + netdev_dbg( + dev->net, + "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + } + + if (is_last) { + skb2 = skb; + } + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + skb_trim(skb2, ether_packet_length); + + if (is_last) { + return 1; + } + else { + usbnet_skb_return(dev, skb2); + skb_pull(skb, ether_packet_length); + } + + i++; + } + while (skb->len); + + return 1; +} + +static const struct driver_info kalmia_info = { + .description = "Samsung Kalmia LTE USB dongle", + .flags = FLAG_WWAN, + .bind = kalmia_bind, + .rx_fixup = kalmia_rx_fixup, + .tx_fixup = kalmia_tx_fixup +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { + /* The unswitched USB ID, to get the module auto loaded: */ + { USB_DEVICE(0x04e8, 0x689a) }, + /* The stick swithed into modem (by e.g. usb_modeswitch): */ + { USB_DEVICE(0x04e8, 0x6889), + .driver_info = (unsigned long) &kalmia_info, }, + { /* EMPTY == end of list */} }; +MODULE_DEVICE_TABLE( usb, products); + +static struct usb_driver kalmia_driver = { + .name = "kalmia", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume +}; + +static int __init kalmia_init(void) +{ + return usb_register(&kalmia_driver); +} +module_init( kalmia_init); + +static void __exit kalmia_exit(void) +{ + usb_deregister(&kalmia_driver); +} +module_exit( kalmia_exit); + +MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>"); +MODULE_DESCRIPTION("Samsung Kalmia USB network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 241756e0e86f..1a2234c20514 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -331,17 +331,7 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, - - -/* At least some of the newest PXA units have very different lies about - * their standards support: they claim to be cell phones offering - * direct access to their radios! (No, they don't conform to CDC MDLM.) - */ { - USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, - USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &bogus_mdlm_info, -}, { /* Motorola MOTOMAGX phones */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 0cb0b0632672..f6853247a620 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -609,7 +609,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) * before it gets out of hand. Naturally, this wastes entries. */ if (capacity < 2+MAX_SKB_FRAGS) { netif_stop_queue(dev); - if (unlikely(!virtqueue_enable_cb(vi->svq))) { + if (unlikely(!virtqueue_enable_cb_delayed(vi->svq))) { /* More just got used, free them then recheck. */ capacity += free_old_xmit_skbs(vi); if (capacity >= 2+MAX_SKB_FRAGS) { diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index fa6e2ac7475a..67402350d0df 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -575,7 +575,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx]; u32 val; - while (num_allocated < num_to_alloc) { + while (num_allocated <= num_to_alloc) { struct vmxnet3_rx_buf_info *rbi; union Vmxnet3_GenericDesc *gd; @@ -621,9 +621,15 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, BUG_ON(rbi->dma_addr == 0); gd->rxd.addr = cpu_to_le64(rbi->dma_addr); - gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT) + gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT) | val | rbi->len); + /* Fill the last buffer but dont mark it ready, or else the + * device will think that the queue is full */ + if (num_allocated == num_to_alloc) + break; + + gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT); num_allocated++; vmxnet3_cmd_ring_adv_next2fill(ring); } @@ -1140,6 +1146,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2 }; u32 num_rxd = 0; + bool skip_page_frags = false; struct Vmxnet3_RxCompDesc *rcd; struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx; #ifdef __BIG_ENDIAN_BITFIELD @@ -1150,11 +1157,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, &rxComp); while (rcd->gen == rq->comp_ring.gen) { struct vmxnet3_rx_buf_info *rbi; - struct sk_buff *skb; + struct sk_buff *skb, *new_skb = NULL; + struct page *new_page = NULL; int num_to_alloc; struct Vmxnet3_RxDesc *rxd; u32 idx, ring_idx; - + struct vmxnet3_cmd_ring *ring = NULL; if (num_rxd >= quota) { /* we may stop even before we see the EOP desc of * the current pkt @@ -1165,6 +1173,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2); idx = rcd->rxdIdx; ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1; + ring = rq->rx_ring + ring_idx; vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd, &rxCmdDesc); rbi = rq->buf_info[ring_idx] + idx; @@ -1193,37 +1202,80 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, goto rcd_done; } + skip_page_frags = false; ctx->skb = rbi->skb; - rbi->skb = NULL; + new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN); + if (new_skb == NULL) { + /* Skb allocation failed, do not handover this + * skb to stack. Reuse it. Drop the existing pkt + */ + rq->stats.rx_buf_alloc_failure++; + ctx->skb = NULL; + rq->stats.drop_total++; + skip_page_frags = true; + goto rcd_done; + } pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, PCI_DMA_FROMDEVICE); skb_put(ctx->skb, rcd->len); + + /* Immediate refill */ + new_skb->dev = adapter->netdev; + skb_reserve(new_skb, NET_IP_ALIGN); + rbi->skb = new_skb; + rbi->dma_addr = pci_map_single(adapter->pdev, + rbi->skb->data, rbi->len, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; + } else { - BUG_ON(ctx->skb == NULL); + BUG_ON(ctx->skb == NULL && !skip_page_frags); + /* non SOP buffer must be type 1 in most cases */ - if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) { - BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE); + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); - if (rcd->len) { - pci_unmap_page(adapter->pdev, - rbi->dma_addr, rbi->len, - PCI_DMA_FROMDEVICE); + /* If an sop buffer was dropped, skip all + * following non-sop fragments. They will be reused. + */ + if (skip_page_frags) + goto rcd_done; - vmxnet3_append_frag(ctx->skb, rcd, rbi); - rbi->page = NULL; - } - } else { - /* - * The only time a non-SOP buffer is type 0 is - * when it's EOP and error flag is raised, which - * has already been handled. + new_page = alloc_page(GFP_ATOMIC); + if (unlikely(new_page == NULL)) { + /* Replacement page frag could not be allocated. + * Reuse this page. Drop the pkt and free the + * skb which contained this page as a frag. Skip + * processing all the following non-sop frags. */ - BUG_ON(true); + rq->stats.rx_buf_alloc_failure++; + dev_kfree_skb(ctx->skb); + ctx->skb = NULL; + skip_page_frags = true; + goto rcd_done; + } + + if (rcd->len) { + pci_unmap_page(adapter->pdev, + rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + vmxnet3_append_frag(ctx->skb, rcd, rbi); } + + /* Immediate refill */ + rbi->page = new_page; + rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; } + skb = ctx->skb; if (rcd->eop) { skb->len += skb->data_len; @@ -1244,26 +1296,27 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, } rcd_done: - /* device may skip some rx descs */ - rq->rx_ring[ring_idx].next2comp = idx; - VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp, - rq->rx_ring[ring_idx].size); - - /* refill rx buffers frequently to avoid starving the h/w */ - num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring + - ring_idx); - if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq, - ring_idx, adapter))) { - vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc, - adapter); - - /* if needed, update the register */ - if (unlikely(rq->shared->updateRxProd)) { - VMXNET3_WRITE_BAR0_REG(adapter, - rxprod_reg[ring_idx] + rq->qid * 8, - rq->rx_ring[ring_idx].next2fill); - rq->uncommitted[ring_idx] = 0; - } + /* device may have skipped some rx descs */ + ring->next2comp = idx; + num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring); + ring = rq->rx_ring + ring_idx; + while (num_to_alloc) { + vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd, + &rxCmdDesc); + BUG_ON(!rxd->addr); + + /* Recv desc is ready to be used by the device */ + rxd->gen = ring->gen; + vmxnet3_cmd_ring_adv_next2fill(ring); + num_to_alloc--; + } + + /* if needed, update the register */ + if (unlikely(rq->shared->updateRxProd)) { + VMXNET3_WRITE_BAR0_REG(adapter, + rxprod_reg[ring_idx] + rq->qid * 8, + ring->next2fill); + rq->uncommitted[ring_idx] = 0; } vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); @@ -2894,6 +2947,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); if (enable_mq) num_tx_queues = min(VMXNET3_DEVICE_MAX_TX_QUEUES, @@ -2901,6 +2955,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else num_tx_queues = 1; + num_tx_queues = rounddown_pow_of_two(num_tx_queues); netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter), max(num_tx_queues, num_rx_queues)); printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n", @@ -3085,6 +3140,7 @@ vmxnet3_remove_device(struct pci_dev *pdev) else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); cancel_work_sync(&adapter->work); diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index f50d36fdf405..e08d75e3f170 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -55,6 +55,7 @@ #include <linux/if_vlan.h> #include <linux/if_arp.h> #include <linux/inetdevice.h> +#include <linux/log2.h> #include "vmxnet3_defs.h" @@ -68,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01010900 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index e050bd65e037..777d1a4e81b2 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2203,8 +2203,10 @@ fst_open(struct net_device *dev) if (port->mode != FST_RAW) { err = hdlc_open(dev); - if (err) + if (err) { + module_put(THIS_MODULE); return err; + } } fst_openport(port); diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 40398bf7d036..24297b274cd4 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -517,18 +517,17 @@ static int x25_asy_close(struct net_device *dev) * and sent on to some IP layer for further processing. */ -static unsigned int x25_asy_receive_buf(struct tty_struct *tty, +static void x25_asy_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct x25_asy *sl = tty->disc_data; - int bytes = count; if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev)) return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -537,8 +536,6 @@ static unsigned int x25_asy_receive_buf(struct tty_struct *tty, } x25_asy_unesc(sl, *cp++); } - - return count; } /* diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 22047628ccfa..b6c5d3715b96 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -72,6 +72,11 @@ static int modparam_all_channels; module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); +static int modparam_fastchanswitch; +module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO); +MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios."); + + /* Module info */ MODULE_AUTHOR("Jiri Slaby"); MODULE_AUTHOR("Nick Kossifidis"); @@ -2686,6 +2691,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); int ret, ani_mode; + bool fast; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); @@ -2705,7 +2711,10 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, ath5k_drain_tx_buffs(sc); if (chan) sc->curchan = chan; - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL, + + fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0; + + ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, skip_pcu); if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 62172d585723..f82383b3ed30 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -107,10 +107,13 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, case AR5K_PKT_TYPE_BEACON: case AR5K_PKT_TYPE_PROBE_RESP: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + break; case AR5K_PKT_TYPE_PIFS: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + break; default: frame_type = type; + break; } tx_ctl->tx_control_0 |= diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 1fef84f87c78..392771f93759 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -691,14 +691,12 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) if (!chinfo[pier].pd_curves) continue; - for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { struct ath5k_pdgain_info *pd = &chinfo[pier].pd_curves[pdg]; - if (pd != NULL) { - kfree(pd->pd_step); - kfree(pd->pd_pwr); - } + kfree(pd->pd_step); + kfree(pd->pd_pwr); } kfree(chinfo[pier].pd_curves); diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index 296c316a8341..f2c0c236392f 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -297,7 +297,9 @@ ath5k_pci_remove(struct pci_dev *pdev) #ifdef CONFIG_PM_SLEEP static int ath5k_pci_suspend(struct device *dev) { - struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); + struct pci_dev *pdev = to_pci_dev(dev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; ath5k_led_off(sc); return 0; @@ -306,7 +308,8 @@ static int ath5k_pci_suspend(struct device *dev) static int ath5k_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct ath5k_softc *sc = pci_get_drvdata(pdev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; /* * Suspend/Resume resets the PCI configuration space, so we have to diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 3510de2cf622..126a4eab35f3 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -1124,8 +1124,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Non fatal, can happen eg. * on mode change */ ret = 0; - } else + } else { + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET, + "fast chan change successful\n"); return 0; + } } /* diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c index 929c68cdf8ab..a073cdce1f15 100644 --- a/drivers/net/wireless/ath/ath5k/sysfs.c +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -10,7 +10,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ \ @@ -18,7 +19,8 @@ static ssize_t ath5k_attr_store_##name(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ int val; \ \ val = (int)simple_strtoul(buf, NULL, 10); \ @@ -33,7 +35,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index d9ff8413ab9a..d9c08c619a3a 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -26,7 +26,6 @@ config ATH9K config ATH9K_PCI bool "Atheros ath9k PCI/PCIe bus support" depends on ATH9K && PCI - default PCI ---help--- This option enables the PCI bus support in ath9k. diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 015d97439935..2d4c0910295b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -829,7 +829,7 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) if (AR_SREV_9271(ah)) { if (!ar9285_hw_cl_cal(ah, chan)) return false; - } else if (AR_SREV_9285_12_OR_LATER(ah)) { + } else if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) { if (!ar9285_hw_clc(ah, chan)) return false; } else { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 0ca7635d0669..ff8150e46f0e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index eee23ecd118a..892c48b15434 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1381,3 +1381,25 @@ void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah) "==== BB update: done ====\n\n"); } EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info); + +void ar9003_hw_disable_phy_restart(struct ath_hw *ah) +{ + u32 val; + + /* While receiving unsupported rate frame rx state machine + * gets into a state 0xb and if phy_restart happens in that + * state, BB would go hang. If RXSM is in 0xb state after + * first bb panic, ensure to disable the phy_restart. + */ + if (!((MS(ah->bb_watchdog_last_status, + AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) || + ah->bb_hang_rx_ofdm)) + return; + + ah->bb_hang_rx_ofdm = true; + val = REG_READ(ah, AR_PHY_RESTART); + val &= ~AR_PHY_RESTART_ENA; + + REG_WRITE(ah, AR_PHY_RESTART, val); +} +EXPORT_SYMBOL(ar9003_hw_disable_phy_restart); diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 7856f0d4512d..343fc9f946db 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } scaledPower = max((u16)0, scaledPower); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 72543ce8f616..1be7c8bbef84 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1555,9 +1555,12 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ah->btcoex_hw.enabled) ath9k_hw_btcoex_enable(ah); - if (AR_SREV_9300_20_OR_LATER(ah)) + if (AR_SREV_9300_20_OR_LATER(ah)) { ar9003_hw_bb_watchdog_config(ah); + ar9003_hw_disable_phy_restart(ah); + } + ath9k_hw_apply_gpio_override(ah); return 0; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 57435ce62792..4b157c53d1a8 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -842,6 +842,7 @@ struct ath_hw { u32 bb_watchdog_last_status; u32 bb_watchdog_timeout_ms; /* in ms, 0 to disable */ + u8 bb_hang_rx_ofdm; /* true if bb hang due to rx_ofdm */ unsigned int paprd_target_power; unsigned int paprd_training_power; @@ -990,6 +991,7 @@ void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah); void ar9003_hw_bb_watchdog_config(struct ath_hw *ah); void ar9003_hw_bb_watchdog_read(struct ath_hw *ah); void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah); +void ar9003_hw_disable_phy_restart(struct ath_hw *ah); void ar9003_paprd_enable(struct ath_hw *ah, bool val); void ar9003_paprd_populate_single_table(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a198ee374b05..2ca351fe6d3c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -670,7 +670,8 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - if (status & ATH9K_INT_FATAL) { + if ((status & ATH9K_INT_FATAL) || + (status & ATH9K_INT_BB_WATCHDOG)) { ath_reset(sc, true); return; } @@ -737,6 +738,7 @@ irqreturn_t ath_isr(int irq, void *dev) { #define SCHED_INTR ( \ ATH9K_INT_FATAL | \ + ATH9K_INT_BB_WATCHDOG | \ ATH9K_INT_RXORN | \ ATH9K_INT_RXEOL | \ ATH9K_INT_RX | \ diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index b8cbfc707213..3bad0b2cf9a3 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -278,6 +278,12 @@ static int ath_pci_suspend(struct device *device) ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); + /* The device has to be moved to FULLSLEEP forcibly. + * Otherwise the chip never moved to full sleep, + * when no interface is up. + */ + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); + return 0; } diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 17542214c93f..ba7f36ab0a74 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -689,7 +689,8 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table, if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) { rate->flags |= IEEE80211_TX_RC_MCS; - if (WLAN_RC_PHY_40(rate_table->info[rix].phy)) + if (WLAN_RC_PHY_40(rate_table->info[rix].phy) && + conf_is_ht40(&txrc->hw->conf)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) rate->flags |= IEEE80211_TX_RC_SHORT_GI; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 3779b8977d47..33443bcaa8d9 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -671,7 +671,8 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid, * TODO - this could be improved to be dependent on the rate. * The hardware can keep up at lower rates, but not higher rates */ - if (fi->keyix != ATH9K_TXKEYIX_INVALID) + if ((fi->keyix != ATH9K_TXKEYIX_INVALID) && + !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)) ndelim += ATH_AGGR_ENCRYPTDELIM; /* diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 2fb53d067512..333b69ef2ae2 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -112,6 +112,8 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x04bb, 0x093f) }, /* NEC WL300NU-G */ { USB_DEVICE(0x0409, 0x0249) }, + /* NEC WL300NU-AG */ + { USB_DEVICE(0x0409, 0x02b4) }, /* AVM FRITZ!WLAN USB Stick N */ { USB_DEVICE(0x057c, 0x8401) }, /* AVM FRITZ!WLAN USB Stick N 2.4 */ diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 9ed65157bef5..05960ddde24e 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -3093,7 +3093,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev, int freq; bool avoid = false; u8 length; - u16 tmp, core, type, count, max, numb, last, cmd; + u16 tmp, core, type, count, max, numb, last = 0, cmd; const u16 *table; bool phy6or5x; diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c index 7e5e85a017b5..a7a4739880dc 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c @@ -628,11 +628,11 @@ void iwl4965_rx_reply_rx(struct iwl_priv *priv, /* rx_status carries information about the packet to mac80211 */ rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.freq = ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), rx_status.band); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.rate_idx = iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); rx_status.flag = 0; diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index f5433c74b845..facc94e74b07 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1218,10 +1218,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c * receive commit_rxon request * abort any previous channel switch if still in process */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); + le16_to_cpu(priv->switch_channel)); iwl_legacy_chswitch_done(priv, false); } @@ -1237,7 +1237,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); iwl_legacy_print_rx_config_cmd(priv, ctx); - return 0; + goto set_tx_power; } /* If we are currently associated and the new config requires @@ -1317,6 +1317,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c iwl4965_init_sensitivity(priv); +set_tx_power: /* If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames */ ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); @@ -1403,9 +1404,6 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, return rc; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - return iwl_legacy_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); } @@ -1543,7 +1541,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv) s32 temp; temp = iwl4965_hw_get_temperature(priv); - if (temp < 0) + if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp)) return; if (priv->temperature != temp) { diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index 42df8321dae8..3be76bd5499a 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -859,12 +859,8 @@ void iwl_legacy_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } EXPORT_SYMBOL(iwl_legacy_chswitch_done); @@ -876,19 +872,19 @@ void iwl_legacy_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active; - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, false); - } + iwl_legacy_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_legacy_chswitch_done(priv, false); } } EXPORT_SYMBOL(iwl_legacy_rx_csa); diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h index bc66c604106c..c5fbda0760de 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.h +++ b/drivers/net/wireless/iwlegacy/iwl-core.h @@ -560,7 +560,7 @@ void iwl_legacy_free_geos(struct iwl_priv *priv); #define STATUS_SCAN_HW 15 #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 - +#define STATUS_CHANNEL_SWITCH_PENDING 18 static inline int iwl_legacy_is_ready(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h index be0106c6a2da..ea30122669ee 100644 --- a/drivers/net/wireless/iwlegacy/iwl-dev.h +++ b/drivers/net/wireless/iwlegacy/iwl-dev.h @@ -855,17 +855,6 @@ struct traffic_stats { }; /* - * iwl_switch_rxon: "channel switch" structure - * - * @ switch_in_progress: channel switch in progress - * @ channel: new channel - */ -struct iwl_switch_rxon { - bool switch_in_progress; - __le16 channel; -}; - -/* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled */ @@ -1115,7 +1104,7 @@ struct iwl_priv { struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - struct iwl_switch_rxon switch_rxon; + __le16 switch_channel; /* 1st responses from initialize and runtime uCode images. * _4965's initialize alive response contains some calibration data. */ diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c index af2ae22fcfd3..7157ba529680 100644 --- a/drivers/net/wireless/iwlegacy/iwl4965-base.c +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c @@ -2861,16 +2861,13 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, goto out; if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) goto out; if (!iwl_legacy_is_associated_ctx(ctx)) goto out; - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out; - if (priv->cfg->ops->lib->set_channel_switch) { ch = channel->hw_value; @@ -2919,15 +2916,18 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ - if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); + if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, + &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } } } out: mutex_unlock(&priv->mutex); - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); IWL_DEBUG_MAC80211(priv, "leave\n"); } diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 61d4a11f566b..2a88e73bb39c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -55,10 +56,10 @@ #define IWL100_UCODE_API_MIN 5 #define IWL1000_FW_PRE "iwlwifi-1000-" -#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode" +#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode" #define IWL100_FW_PRE "iwlwifi-100-" -#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode" +#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode" /* diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 86feec86d130..3df76f53a41b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,13 +59,13 @@ #define IWL105_UCODE_API_MIN 5 #define IWL2030_FW_PRE "iwlwifi-2030-" -#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode" +#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE __stringify(api) ".ucode" #define IWL2000_FW_PRE "iwlwifi-2000-" -#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode" +#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE __stringify(api) ".ucode" #define IWL105_FW_PRE "iwlwifi-105-" -#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE #api ".ucode" +#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE __stringify(api) ".ucode" static void iwl2000_set_ct_threshold(struct iwl_priv *priv) { @@ -177,79 +178,6 @@ static int iwl2000_hw_set_hw_params(struct iwl_priv *priv) return 0; } -static int iwl2030_hw_channel_switch(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch) -{ - /* - * MULTI-FIXME - * See iwl_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; - const struct iwl_channel_info *ch_info; - u32 switch_time_in_usec, ucode_switch_time; - u16 ch; - u32 tsf_low; - u8 switch_count; - u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); - struct ieee80211_vif *vif = ctx->vif; - struct iwl_host_cmd hcmd = { - .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, - .flags = CMD_SYNC, - .data = { &cmd, }, - }; - - cmd.band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; - IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", - ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; - switch_count = ch_switch->count; - tsf_low = ch_switch->timestamp & 0x0ffffffff; - /* - * calculate the ucode channel switch time - * adding TSF as one of the factor for when to switch - */ - if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { - if (switch_count > ((priv->ucode_beacon_time - tsf_low) / - beacon_interval)) { - switch_count -= (priv->ucode_beacon_time - - tsf_low) / beacon_interval; - } else - switch_count = 0; - } - if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - else { - switch_time_in_usec = - vif->bss_conf.beacon_int * switch_count * TIME_UNIT; - ucode_switch_time = iwl_usecs_to_beacons(priv, - switch_time_in_usec, - beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); - } - IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - ch_info = iwl_get_channel_info(priv, priv->band, ch); - if (ch_info) - cmd.expect_beacon = is_channel_radar(ch_info); - else { - IWL_ERR(priv, "invalid channel switch from %u to %u\n", - ctx->active.channel, ch); - return -EFAULT; - } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - - return iwl_send_cmd_sync(priv, &hcmd); -} - static struct iwl_lib_ops iwl2000_lib = { .set_hw_params = iwl2000_hw_set_hw_params, .rx_handler_setup = iwlagn_rx_handler_setup, @@ -258,7 +186,6 @@ static struct iwl_lib_ops iwl2000_lib = { .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, .send_tx_power = iwlagn_send_tx_power, .update_chain_flags = iwl_update_chain_flags, - .set_channel_switch = iwl2030_hw_channel_switch, .apm_ops = { .init = iwl_apm_init, .config = iwl2000_nic_config, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a70b8cfafda1..e816c27db794 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -37,6 +37,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -57,10 +58,10 @@ #define IWL5150_UCODE_API_MIN 1 #define IWL5000_FW_PRE "iwlwifi-5000-" -#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode" +#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode" #define IWL5150_FW_PRE "iwlwifi-5150-" -#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode" +#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode" /* NIC configuration for 5000 series */ static void iwl5000_nic_config(struct iwl_priv *priv) @@ -331,8 +332,6 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, ctx->active.channel, ch); return -EFAULT; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } @@ -425,7 +424,6 @@ static struct iwl_base_params iwl5000_base_params = { }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ }; #define IWL_DEVICE_5000 \ diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index f8c710db6e6f..5b150bc70b06 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,16 +59,16 @@ #define IWL6000G2_UCODE_API_MIN 4 #define IWL6000_FW_PRE "iwlwifi-6000-" -#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode" +#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" #define IWL6050_FW_PRE "iwlwifi-6050-" -#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode" +#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" #define IWL6005_FW_PRE "iwlwifi-6000g2a-" -#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode" +#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" #define IWL6030_FW_PRE "iwlwifi-6000g2b-" -#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode" +#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" static void iwl6000_set_ct_threshold(struct iwl_priv *priv) { @@ -270,8 +271,6 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, ctx->active.channel, ch); return -EFAULT; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } @@ -603,19 +602,27 @@ struct iwl_cfg iwl6050_2abg_cfg = { IWL_DEVICE_6050, }; +#define IWL_DEVICE_6150 \ + .fw_name_pre = IWL6050_FW_PRE, \ + .ucode_api_max = IWL6050_UCODE_API_MAX, \ + .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .ops = &iwl6150_ops, \ + .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ + .base_params = &iwl6050_base_params, \ + .need_dc_calib = true, \ + .led_mode = IWL_LED_BLINK, \ + .internal_wimax_coex = true + struct iwl_cfg iwl6150_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", - .fw_name_pre = IWL6050_FW_PRE, - .ucode_api_max = IWL6050_UCODE_API_MAX, - .ucode_api_min = IWL6050_UCODE_API_MIN, - .eeprom_ver = EEPROM_6150_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, - .ops = &iwl6150_ops, - .base_params = &iwl6050_base_params, + IWL_DEVICE_6150, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .led_mode = IWL_LED_RF_STATE, - .internal_wimax_coex = true, +}; + +struct iwl_cfg iwl6150_bg_cfg = { + .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", + IWL_DEVICE_6150, }; struct iwl_cfg iwl6000_3agn_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index b12c72d63ccb..23fa93deae96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -163,17 +163,9 @@ static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, __le16 fc, __le32 *tx_flags) { if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || - info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || + info->flags & IEEE80211_TX_CTL_AMPDU) *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } - - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation && - info->flags & IEEE80211_TX_CTL_AMPDU) { - *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } } /* Calc max signal level (dBm) among 3 possible receivers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index a95ad84c5377..09f679d6046f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -325,6 +325,14 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return 0; } + /* + * force CTS-to-self frames protection if RTS-CTS is not preferred + * one aggregation protection method + */ + if (!(priv->cfg->ht_params && + priv->cfg->ht_params->use_rts_for_aggregation)) + ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; + if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; @@ -342,10 +350,10 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) * receive commit_rxon request * abort any previous channel switch if still in process */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); + le16_to_cpu(priv->switch_channel)); iwl_chswitch_done(priv, false); } @@ -362,6 +370,11 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } memcpy(active, &ctx->staging, sizeof(*active)); + /* + * We do not commit tx power settings while channel changing, + * do it now if after settings changed. + */ + iwl_set_tx_power(priv, priv->tx_power_next, false); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 11c6c1169e78..8e1942ebd9a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2843,16 +2843,13 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, goto out; if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) goto out; if (!iwl_is_associated_ctx(ctx)) goto out; - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out; - if (priv->cfg->ops->lib->set_channel_switch) { ch = channel->hw_value; @@ -2901,15 +2898,19 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; + ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, + &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } } } out: mutex_unlock(&priv->mutex); - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); IWL_DEBUG_MAC80211(priv, "leave\n"); } @@ -3831,11 +3832,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6150 WiFi/WiMax Series */ {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)}, /* 1000 Series WiFi */ {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 2495fe7a58cb..d1716844002e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg; extern struct iwl_cfg iwl6050_2agn_cfg; extern struct iwl_cfg iwl6050_2abg_cfg; extern struct iwl_cfg iwl6150_bgn_cfg; +extern struct iwl_cfg iwl6150_bg_cfg; extern struct iwl_cfg iwl1000_bgn_cfg; extern struct iwl_cfg iwl1000_bg_cfg; extern struct iwl_cfg iwl100_bgn_cfg; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4653deada05b..45cc51c9c93e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -843,12 +843,8 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } #ifdef CONFIG_IWLWIFI_DEBUG @@ -1767,6 +1763,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_context *tmp; + enum nl80211_iftype newviftype = newtype; u32 interface_modes; int err; @@ -1822,7 +1819,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* success */ iwl_teardown_interface(priv, vif, true); - vif->type = newtype; + vif->type = newviftype; vif->p2p = newp2p; err = iwl_setup_interface(priv, ctx); WARN_ON(err); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 3bb76f6ea410..a54d416ec345 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -560,6 +560,7 @@ void iwlcore_free_geos(struct iwl_priv *priv); #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 #define STATUS_DEVICE_ENABLED 18 +#define STATUS_CHANNEL_SWITCH_PENDING 19 static inline int iwl_is_ready(struct iwl_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 22a6e3ec7094..c8de236c141b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -982,17 +982,6 @@ struct traffic_stats { }; /* - * iwl_switch_rxon: "channel switch" structure - * - * @ switch_in_progress: channel switch in progress - * @ channel: new channel - */ -struct iwl_switch_rxon { - bool switch_in_progress; - __le16 channel; -}; - -/* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled */ @@ -1287,7 +1276,7 @@ struct iwl_priv { struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - struct iwl_switch_rxon switch_rxon; + __le16 switch_channel; struct { u32 error_event_table; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 0053e9ea9021..b774517aa9fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -250,19 +250,19 @@ static void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_cmd *rxon = (void *)&ctx->active; - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, false); - } + iwl_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_chswitch_done(priv, false); } } diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 686e176b5ebd..137dba95b1ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -126,7 +126,7 @@ static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, - struct iwl_tfd *tfd) + struct iwl_tfd *tfd, int dma_dir) { struct pci_dev *dev = priv->pci_dev; int i; @@ -151,7 +151,7 @@ static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i), - iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE); + iwl_tfd_tb_get_len(tfd, i), dma_dir); } /** @@ -167,7 +167,8 @@ void iwlagn_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) struct iwl_tfd *tfd_tmp = txq->tfds; int index = txq->q.read_ptr; - iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index]); + iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index], + PCI_DMA_TODEVICE); /* free SKB */ if (txq->txb) { @@ -310,9 +311,7 @@ void iwl_cmd_queue_unmap(struct iwl_priv *priv) i = get_cmd_index(q, q->read_ptr); if (txq->meta[i].flags & CMD_MAPPED) { - pci_unmap_single(priv->pci_dev, - dma_unmap_addr(&txq->meta[i], mapping), - dma_unmap_len(&txq->meta[i], len), + iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i], PCI_DMA_BIDIRECTIONAL); txq->meta[i].flags = 0; } @@ -535,12 +534,7 @@ out_free_arrays: void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { - int actual_slots = slots_num; - - if (txq_id == priv->cmd_queue) - actual_slots++; - - memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * actual_slots); + memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * slots_num); txq->need_update = 0; @@ -700,10 +694,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY)) continue; phys_addr = pci_map_single(priv->pci_dev, (void *)cmd->data[i], - cmd->len[i], PCI_DMA_TODEVICE); + cmd->len[i], PCI_DMA_BIDIRECTIONAL); if (pci_dma_mapping_error(priv->pci_dev, phys_addr)) { iwlagn_unmap_tfd(priv, out_meta, - &txq->tfds[q->write_ptr]); + &txq->tfds[q->write_ptr], + PCI_DMA_BIDIRECTIONAL); idx = -ENOMEM; goto out; } @@ -807,7 +802,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; - iwlagn_unmap_tfd(priv, meta, &txq->tfds[index]); + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], PCI_DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 84566db486d2..71c8f3fccfa1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv, cmd = cmdnode->cmdbuf; spin_lock_irqsave(&priv->driver_lock, flags); + priv->seqnum++; + cmd->seqnum = cpu_to_le16(priv->seqnum); priv->cur_cmd = cmdnode; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, /* Copy the incoming command to the buffer */ memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); - /* Set sequence number, clean result, move to buffer */ - priv->seqnum++; + /* Set command, clean result, move to buffer */ cmdnode->cmdbuf->command = cpu_to_le16(command); cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); - cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); cmdnode->cmdbuf->result = 0; lbs_deb_host("PREP_CMD: command 0x%04x\n", command); diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index a7b5cb0c2753..224e9853c480 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -907,7 +907,7 @@ static void if_sdio_interrupt(struct sdio_func *func) card = sdio_get_drvdata(func); cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret); - if (ret) + if (ret || !cause) goto out; lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause); @@ -1008,10 +1008,6 @@ static int if_sdio_probe(struct sdio_func *func, if (ret) goto release; - ret = sdio_claim_irq(func, if_sdio_interrupt); - if (ret) - goto disable; - /* For 1-bit transfers to the 8686 model, we need to enable the * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 * bit to allow access to non-vendor registers. */ @@ -1083,6 +1079,21 @@ static int if_sdio_probe(struct sdio_func *func, card->rx_unit = 0; /* + * Set up the interrupt handler late. + * + * If we set it up earlier, the (buggy) hardware generates a spurious + * interrupt, even before the interrupt has been enabled, with + * CCCR_INTx = 0. + * + * We register the interrupt handler late so that we can handle any + * spurious interrupts, and also to avoid generation of that known + * spurious interrupt in the first place. + */ + ret = sdio_claim_irq(func, if_sdio_interrupt); + if (ret) + goto disable; + + /* * Enable interrupts now that everything is set up */ sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 660831ce293c..687c1f223497 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1288,6 +1288,8 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac, *(unsigned long *) wdev_priv = (unsigned long) priv; + set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev); + ret = wiphy_register(wdev->wiphy); if (ret < 0) { dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n", diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index a0e9bc5253e0..4e97e90aa399 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -167,8 +167,8 @@ /* Rx unit register */ #define CARD_RX_UNIT_REG 0x63 -/* Event header Len*/ -#define MWIFIEX_EVENT_HEADER_LEN 8 +/* Event header len w/o 4 bytes of interface header */ +#define MWIFIEX_EVENT_HEADER_LEN 4 /* Max retry number of CMD53 write */ #define MAX_WRITE_IOMEM_RETRY 2 diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 32261189bcef..aeac3cc4dbe4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2474,6 +2474,7 @@ struct mwl8k_cmd_set_hw_spec { * faster client. */ #define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400 +#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200 #define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010 @@ -2510,7 +2511,8 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw) cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON | - MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY); + MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY | + MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR); cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 9def1e5369a1..b2f8b8fd4d2d 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -166,7 +166,6 @@ config RT2800USB_RT35XX config RT2800USB_RT53XX bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" depends on EXPERIMENTAL - default y ---help--- This adds support for rt53xx wireless chipset family to the rt2800pci driver. diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 555180d8f4aa..b704e5b183d0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -250,7 +250,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2x00link_reset_tuner(rt2x00dev, false); - if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) && (conf->flags & IEEE80211_CONF_PS)) { beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c018d67aab8e..939821b4af2f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -146,6 +146,9 @@ static void rt2x00lib_autowakeup(struct work_struct *work) struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, autowakeup_work.work); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) ERROR(rt2x00dev, "Device failed to wakeup.\n"); clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); @@ -1160,6 +1163,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) * Stop all work. */ cancel_work_sync(&rt2x00dev->intf_work); + cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); if (rt2x00_is_usb(rt2x00dev)) { del_timer_sync(&rt2x00dev->txstatus_timer); cancel_work_sync(&rt2x00dev->rxdone_work); diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index a40952845436..254b64ba4bf6 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -669,6 +669,14 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) &rx_status, (u8 *) pdesc, skb); + new_skb = dev_alloc_skb(rtlpci->rxbuffersize); + if (unlikely(!new_skb)) { + RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), + DBG_DMESG, + ("can't alloc skb for rx\n")); + goto done; + } + pci_unmap_single(rtlpci->pdev, *((dma_addr_t *) skb->cb), rtlpci->rxbuffersize, @@ -690,7 +698,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) hdr = rtl_get_hdr(skb); fc = rtl_get_fc(skb); - if (!stats.crc || !stats.hwerror) { + if (!stats.crc && !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); @@ -758,15 +766,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) rtl_lps_leave(hw); } - new_skb = dev_alloc_skb(rtlpci->rxbuffersize); - if (unlikely(!new_skb)) { - RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, - ("can't alloc skb for rx\n")); - goto done; - } skb = new_skb; - /*skb->dev = dev; */ rtlpci->rx_ring[rx_queue_idx].rx_buf[rtlpci-> rx_ring @@ -1113,6 +1113,13 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) rtlpci->rx_ring[rx_queue_idx].idx = 0; + /* If amsdu_8k is disabled, set buffersize to 4096. This + * change will reduce memory fragmentation. + */ + if (rtlpci->rxbuffersize > 4096 && + rtlpriv->rtlhal.disable_amsdu_8k) + rtlpci->rxbuffersize = 4096; + for (i = 0; i < rtlpci->rxringcount; i++) { struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); @@ -1617,6 +1624,16 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, pci_read_config_byte(pdev, 0x8, &revisionid); pci_read_config_word(pdev, 0x3C, &irqline); + /* PCI ID 0x10ec:0x8192 occurs for both RTL8192E, which uses + * r8192e_pci, and RTL8192SE, which uses this driver. If the + * revision ID is RTL_PCI_REVISION_ID_8192PCIE (0x01), then + * the correct driver is r8192e_pci, thus this routine should + * return false. + */ + if (deviceid == RTL_PCI_8192SE_DID && + revisionid == RTL_PCI_REVISION_ID_8192PCIE) + return false; + if (deviceid == RTL_PCI_8192_DID || deviceid == RTL_PCI_0044_DID || deviceid == RTL_PCI_0047_DID || @@ -1849,7 +1866,8 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev, pci_write_config_byte(pdev, 0x04, 0x07); /* find adapter */ - _rtl_pci_find_adapter(pdev, hw); + if (!_rtl_pci_find_adapter(pdev, hw)) + goto fail3; /* Init IO handler */ _rtl_pci_io_handler_init(&pdev->dev, hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index bee7c1480f63..942f7a3969a7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -53,6 +53,8 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin"); static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); + const struct firmware *firmware; + int err; rtlpriv->dm.dm_initialgain_enable = 1; rtlpriv->dm.dm_flag = 0; @@ -64,6 +66,24 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) ("Can't alloc buffer for fw.\n")); return 1; } + /* request fw */ + err = request_firmware(&firmware, rtlpriv->cfg->fw_name, + rtlpriv->io.dev); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Failed to request firmware!\n")); + return 1; + } + if (firmware->size > 0x4000) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Firmware is too big!\n")); + release_firmware(firmware); + return 1; + } + memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size); + rtlpriv->rtlhal.fwsize = firmware->size; + release_firmware(firmware); + return 0; } @@ -278,6 +298,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ + {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/ {RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ /* HP - Lite-On ,8188CUS Slim Combo */ diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 1ab6c86aac40..c83fefb6662f 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings { /* time to wait on the channel for passive scans (in TUs) */ u32 dwell_time_passive; + /* time to wait on the channel for DFS scans (in TUs) */ + u32 dwell_time_dfs; + /* number of probe requests to send on each channel in active scans */ u8 num_probe_reqs; diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index bc00e52f6445..e6497dc669df 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = { .min_dwell_time_active = 8, .max_dwell_time_active = 30, .dwell_time_passive = 100, + .dwell_time_dfs = 150, .num_probe_reqs = 2, .rssi_threshold = -90, .snr_threshold = 0, diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f37e5a391976..56f76abc754d 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -331,16 +331,22 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; + bool force_passive = !req->n_ssids; for (i = 0, j = start; i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS; i++) { flags = req->channels[i]->flags; - if (!(flags & IEEE80211_CHAN_DISABLED) && - ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && - ((flags & IEEE80211_CHAN_RADAR) == radar) && - (req->channels[i]->band == band)) { + if (force_passive) + flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if ((req->channels[i]->band == band) && + !(flags & IEEE80211_CHAN_DISABLED) && + (!!(flags & IEEE80211_CHAN_RADAR) == radar) && + /* if radar is set, we ignore the passive flag */ + (radar || + !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, req->channels[i]->center_freq); @@ -350,7 +356,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); - if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { + if (flags & IEEE80211_CHAN_RADAR) { + channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; + channels[j].passive_duration = + cpu_to_le16(c->dwell_time_dfs); + } + else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); } else { @@ -359,7 +370,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].max_duration = cpu_to_le16(c->max_dwell_time_active); } - channels[j].tx_power_att = req->channels[j]->max_power; + channels[j].tx_power_att = req->channels[i]->max_power; channels[j].channel = req->channels[i]->hw_value; j++; @@ -386,7 +397,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_2GHZ, false, false, idx); - idx += cfg->active[0]; + /* + * 5GHz channels always start at position 14, not immediately + * after the last 2.4GHz channel + */ + idx = 14; cfg->passive[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, @@ -394,22 +409,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, false, true, idx); idx += cfg->passive[1]; - cfg->active[1] = + cfg->dfs = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - false, false, 14); - idx += cfg->active[1]; + true, true, idx); + idx += cfg->dfs; - cfg->dfs = + cfg->active[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - true, false, idx); - idx += cfg->dfs; + false, false, idx); + idx += cfg->active[1]; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", cfg->active[1], cfg->passive[1]); + wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs); return idx; } @@ -421,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl1271_cmd_sched_scan_config *cfg = NULL; struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, total_channels, ret; + bool force_passive = !req->n_ssids; wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); @@ -444,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) cfg->intervals[i] = cpu_to_le32(req->interval); - if (req->ssids[0].ssid_len && req->ssids[0].ssid) { + if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) { cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC; cfg->ssid_len = req->ssids[0].ssid_len; memcpy(cfg->ssid, req->ssids[0].ssid, @@ -461,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, goto out; } - if (cfg->active[0]) { + if (!force_passive && cfg->active[0]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_2GHZ], @@ -473,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } } - if (cfg->active[1]) { + if (!force_passive && cfg->active[1]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_5GHZ], diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h index c83319579ca3..a0b6c5d67b07 100644 --- a/drivers/net/wireless/wl12xx/scan.h +++ b/drivers/net/wireless/wl12xx/scan.h @@ -137,6 +137,9 @@ enum { SCAN_BSS_TYPE_ANY, }; +#define SCAN_CHANNEL_FLAGS_DFS BIT(0) +#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) + struct conn_scan_ch_params { __le16 min_duration; __le16 max_duration; diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 0e819943b9e4..631194d49828 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1533,6 +1533,31 @@ static void __exit usb_exit(void) module_init(usb_init); module_exit(usb_exit); +static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len, + int *actual_length, int timeout) +{ + /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in + * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint + * descriptor. + */ + struct usb_host_endpoint *ep; + unsigned int pipe; + + pipe = usb_sndintpipe(udev, EP_REGS_OUT); + ep = usb_pipe_endpoint(udev, pipe); + if (!ep) + return -EINVAL; + + if (usb_endpoint_xfer_int(&ep->desc)) { + return usb_interrupt_msg(udev, pipe, data, len, + actual_length, timeout); + } else { + pipe = usb_sndbulkpipe(udev, EP_REGS_OUT); + return usb_bulk_msg(udev, pipe, data, len, actual_length, + timeout); + } +} + static int usb_int_regs_length(unsigned int count) { return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); @@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto error; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; @@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, rw->value = cpu_to_le16(ioreqs[i].value); } - usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, iowrite16v_urb_complete, usb, - ep->desc.bInterval); + /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode + * endpoint is bulk. Select correct type URB by endpoint descriptor. + */ + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb, + ep->desc.bInterval); + else + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb); + urb->transfer_flags |= URB_FREE_BUFFER; /* Submit previous URB */ @@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) } udev = zd_usb_to_usbdev(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto out; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index a3984f4ef192..f34b5b29fb95 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -141,6 +141,13 @@ static struct notifier_block module_load_nb = { .notifier_call = module_load_notify, }; +static void free_all_tasks(void) +{ + /* make sure we don't leak task structs */ + process_task_mortuary(); + process_task_mortuary(); +} + int sync_start(void) { int err; @@ -148,8 +155,6 @@ int sync_start(void) if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL)) return -ENOMEM; - mutex_lock(&buffer_mutex); - err = task_handoff_register(&task_free_nb); if (err) goto out1; @@ -166,7 +171,6 @@ int sync_start(void) start_cpu_work(); out: - mutex_unlock(&buffer_mutex); return err; out4: profile_event_unregister(PROFILE_MUNMAP, &munmap_nb); @@ -174,6 +178,7 @@ out3: profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb); out2: task_handoff_unregister(&task_free_nb); + free_all_tasks(); out1: free_cpumask_var(marked_cpus); goto out; @@ -182,20 +187,16 @@ out1: void sync_stop(void) { - /* flush buffers */ - mutex_lock(&buffer_mutex); end_cpu_work(); unregister_module_notifier(&module_load_nb); profile_event_unregister(PROFILE_MUNMAP, &munmap_nb); profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb); task_handoff_unregister(&task_free_nb); - mutex_unlock(&buffer_mutex); - flush_cpu_work(); + barrier(); /* do all of the above first */ - /* make sure we don't leak task structs */ - process_task_mortuary(); - process_task_mortuary(); + flush_cpu_work(); + free_all_tasks(); free_cpumask_var(marked_cpus); } diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index c85f744270a5..094308e41be5 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o +obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 12e02bf92c4a..3dc9befa5aec 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -698,12 +698,7 @@ int __init detect_intel_iommu(void) { #ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; - /* - * for now we will disable dma-remapping when interrupt - * remapping is enabled. - * When support for queued invalidation for IOTLB invalidation - * is added, we will not need this any more. - */ + dmar = (struct acpi_table_dmar *) dmar_tbl; if (ret && cpu_has_x2apic && dmar->flags & 0x1) printk(KERN_INFO diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 6af6b628175b..f02c34d26d1b 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -47,6 +47,8 @@ #define ROOT_SIZE VTD_PAGE_SIZE #define CONTEXT_SIZE VTD_PAGE_SIZE +#define IS_BRIDGE_HOST_DEVICE(pdev) \ + ((pdev->class >> 8) == PCI_CLASS_BRIDGE_HOST) #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) #define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e) @@ -116,6 +118,11 @@ static inline unsigned long align_to_level(unsigned long pfn, int level) return (pfn + level_size(level) - 1) & level_mask(level); } +static inline unsigned long lvl_to_nr_pages(unsigned int lvl) +{ + return 1 << ((lvl - 1) * LEVEL_STRIDE); +} + /* VT-d pages must always be _smaller_ than MM pages. Otherwise things are never going to work. */ static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn) @@ -143,6 +150,12 @@ static void __init check_tylersburg_isoch(void); static int rwbf_quirk; /* + * set to 1 to panic kernel if can't successfully enable VT-d + * (used when kernel is launched w/ TXT) + */ +static int force_on = 0; + +/* * 0: Present * 1-11: Reserved * 12-63: Context Ptr (12 - (haw-1)) @@ -338,6 +351,9 @@ struct dmar_domain { int iommu_coherency;/* indicate coherency of iommu access */ int iommu_snooping; /* indicate snooping control feature*/ int iommu_count; /* reference count of iommu */ + int iommu_superpage;/* Level of superpages supported: + 0 == 4KiB (no superpages), 1 == 2MiB, + 2 == 1GiB, 3 == 512GiB, 4 == 1TiB */ spinlock_t iommu_lock; /* protect iommu set in domain */ u64 max_addr; /* maximum mapped address */ }; @@ -387,6 +403,7 @@ int dmar_disabled = 1; static int dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; +static int intel_iommu_superpage = 1; #define DUMMY_DEVICE_DOMAIN_INFO ((struct device_domain_info *)(-1)) static DEFINE_SPINLOCK(device_domain_lock); @@ -417,6 +434,10 @@ static int __init intel_iommu_setup(char *str) printk(KERN_INFO "Intel-IOMMU: disable batched IOTLB flush\n"); intel_iommu_strict = 1; + } else if (!strncmp(str, "sp_off", 6)) { + printk(KERN_INFO + "Intel-IOMMU: disable supported super page\n"); + intel_iommu_superpage = 0; } str += strcspn(str, ","); @@ -555,11 +576,32 @@ static void domain_update_iommu_snooping(struct dmar_domain *domain) } } +static void domain_update_iommu_superpage(struct dmar_domain *domain) +{ + int i, mask = 0xf; + + if (!intel_iommu_superpage) { + domain->iommu_superpage = 0; + return; + } + + domain->iommu_superpage = 4; /* 1TiB */ + + for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) { + mask |= cap_super_page_val(g_iommus[i]->cap); + if (!mask) { + break; + } + } + domain->iommu_superpage = fls(mask); +} + /* Some capabilities may be different across iommus */ static void domain_update_iommu_cap(struct dmar_domain *domain) { domain_update_iommu_coherency(domain); domain_update_iommu_snooping(domain); + domain_update_iommu_superpage(domain); } static struct intel_iommu *device_to_iommu(int segment, u8 bus, u8 devfn) @@ -689,23 +731,31 @@ out: } static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, - unsigned long pfn) + unsigned long pfn, int large_level) { int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; struct dma_pte *parent, *pte = NULL; int level = agaw_to_level(domain->agaw); - int offset; + int offset, target_level; BUG_ON(!domain->pgd); BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width); parent = domain->pgd; + /* Search pte */ + if (!large_level) + target_level = 1; + else + target_level = large_level; + while (level > 0) { void *tmp_page; offset = pfn_level_offset(pfn, level); pte = &parent[offset]; - if (level == 1) + if (!large_level && (pte->val & DMA_PTE_LARGE_PAGE)) + break; + if (level == target_level) break; if (!dma_pte_present(pte)) { @@ -733,10 +783,11 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, return pte; } + /* return address's pte at specific level */ static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, unsigned long pfn, - int level) + int level, int *large_page) { struct dma_pte *parent, *pte = NULL; int total = agaw_to_level(domain->agaw); @@ -749,8 +800,16 @@ static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, if (level == total) return pte; - if (!dma_pte_present(pte)) + if (!dma_pte_present(pte)) { + *large_page = total; break; + } + + if (pte->val & DMA_PTE_LARGE_PAGE) { + *large_page = total; + return pte; + } + parent = phys_to_virt(dma_pte_addr(pte)); total--; } @@ -763,6 +822,7 @@ static void dma_pte_clear_range(struct dmar_domain *domain, unsigned long last_pfn) { int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + unsigned int large_page = 1; struct dma_pte *first_pte, *pte; BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); @@ -771,14 +831,15 @@ static void dma_pte_clear_range(struct dmar_domain *domain, /* we don't need lock here; nobody else touches the iova range */ do { - first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1); + large_page = 1; + first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1, &large_page); if (!pte) { - start_pfn = align_to_level(start_pfn + 1, 2); + start_pfn = align_to_level(start_pfn + 1, large_page + 1); continue; } - do { + do { dma_clear_pte(pte); - start_pfn++; + start_pfn += lvl_to_nr_pages(large_page); pte++; } while (start_pfn <= last_pfn && !first_pte_in_page(pte)); @@ -798,6 +859,7 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, int total = agaw_to_level(domain->agaw); int level; unsigned long tmp; + int large_page = 2; BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); @@ -813,7 +875,10 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, return; do { - first_pte = pte = dma_pfn_level_pte(domain, tmp, level); + large_page = level; + first_pte = pte = dma_pfn_level_pte(domain, tmp, level, &large_page); + if (large_page > level) + level = large_page + 1; if (!pte) { tmp = align_to_level(tmp + 1, level + 1); continue; @@ -1397,6 +1462,7 @@ static int domain_init(struct dmar_domain *domain, int guest_width) else domain->iommu_snooping = 0; + domain->iommu_superpage = fls(cap_super_page_val(iommu->cap)); domain->iommu_count = 1; domain->nid = iommu->node; @@ -1417,6 +1483,10 @@ static void domain_exit(struct dmar_domain *domain) if (!domain) return; + /* Flush any lazy unmaps that may reference this domain */ + if (!intel_iommu_strict) + flush_unmaps_timeout(0); + domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); @@ -1648,6 +1718,34 @@ static inline unsigned long aligned_nrpages(unsigned long host_addr, return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT; } +/* Return largest possible superpage level for a given mapping */ +static inline int hardware_largepage_caps(struct dmar_domain *domain, + unsigned long iov_pfn, + unsigned long phy_pfn, + unsigned long pages) +{ + int support, level = 1; + unsigned long pfnmerge; + + support = domain->iommu_superpage; + + /* To use a large page, the virtual *and* physical addresses + must be aligned to 2MiB/1GiB/etc. Lower bits set in either + of them will mean we have to use smaller pages. So just + merge them and check both at once. */ + pfnmerge = iov_pfn | phy_pfn; + + while (support && !(pfnmerge & ~VTD_STRIDE_MASK)) { + pages >>= VTD_STRIDE_SHIFT; + if (!pages) + break; + pfnmerge >>= VTD_STRIDE_SHIFT; + level++; + support--; + } + return level; +} + static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, struct scatterlist *sg, unsigned long phys_pfn, unsigned long nr_pages, int prot) @@ -1656,6 +1754,8 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, phys_addr_t uninitialized_var(pteval); int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; unsigned long sg_res; + unsigned int largepage_lvl = 0; + unsigned long lvl_pages = 0; BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); @@ -1671,7 +1771,7 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot; } - while (nr_pages--) { + while (nr_pages > 0) { uint64_t tmp; if (!sg_res) { @@ -1679,11 +1779,21 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset; sg->dma_length = sg->length; pteval = page_to_phys(sg_page(sg)) | prot; + phys_pfn = pteval >> VTD_PAGE_SHIFT; } + if (!pte) { - first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); + largepage_lvl = hardware_largepage_caps(domain, iov_pfn, phys_pfn, sg_res); + + first_pte = pte = pfn_to_dma_pte(domain, iov_pfn, largepage_lvl); if (!pte) return -ENOMEM; + /* It is large page*/ + if (largepage_lvl > 1) + pteval |= DMA_PTE_LARGE_PAGE; + else + pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE; + } /* We don't need lock here, nobody else * touches the iova range @@ -1699,16 +1809,38 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, } WARN_ON(1); } + + lvl_pages = lvl_to_nr_pages(largepage_lvl); + + BUG_ON(nr_pages < lvl_pages); + BUG_ON(sg_res < lvl_pages); + + nr_pages -= lvl_pages; + iov_pfn += lvl_pages; + phys_pfn += lvl_pages; + pteval += lvl_pages * VTD_PAGE_SIZE; + sg_res -= lvl_pages; + + /* If the next PTE would be the first in a new page, then we + need to flush the cache on the entries we've just written. + And then we'll need to recalculate 'pte', so clear it and + let it get set again in the if (!pte) block above. + + If we're done (!nr_pages) we need to flush the cache too. + + Also if we've been setting superpages, we may need to + recalculate 'pte' and switch back to smaller pages for the + end of the mapping, if the trailing size is not enough to + use another superpage (i.e. sg_res < lvl_pages). */ pte++; - if (!nr_pages || first_pte_in_page(pte)) { + if (!nr_pages || first_pte_in_page(pte) || + (largepage_lvl > 1 && sg_res < lvl_pages)) { domain_flush_cache(domain, first_pte, (void *)pte - (void *)first_pte); pte = NULL; } - iov_pfn++; - pteval += VTD_PAGE_SIZE; - sg_res--; - if (!sg_res) + + if (!sg_res && nr_pages) sg = sg_next(sg); } return 0; @@ -2016,7 +2148,7 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO) return 0; return iommu_prepare_identity_map(pdev, rmrr->base_address, - rmrr->end_address + 1); + rmrr->end_address); } #ifdef CONFIG_DMAR_FLOPPY_WA @@ -2030,7 +2162,7 @@ static inline void iommu_prepare_isa(void) return; printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n"); - ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024); + ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024 - 1); if (ret) printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; " @@ -2106,10 +2238,10 @@ static int identity_mapping(struct pci_dev *pdev) if (likely(!iommu_identity_mapping)) return 0; + info = pdev->dev.archdata.iommu; + if (info && info != DUMMY_DEVICE_DOMAIN_INFO) + return (info->domain == si_domain); - list_for_each_entry(info, &si_domain->devices, link) - if (info->dev == pdev) - return 1; return 0; } @@ -2187,8 +2319,19 @@ static int iommu_should_identity_map(struct pci_dev *pdev, int startup) * Assume that they will -- if they turn out not to be, then we can * take them out of the 1:1 domain later. */ - if (!startup) - return pdev->dma_mask > DMA_BIT_MASK(32); + if (!startup) { + /* + * If the device's dma_mask is less than the system's memory + * size then this is not a candidate for identity mapping. + */ + u64 dma_mask = pdev->dma_mask; + + if (pdev->dev.coherent_dma_mask && + pdev->dev.coherent_dma_mask < dma_mask) + dma_mask = pdev->dev.coherent_dma_mask; + + return dma_mask >= dma_get_required_mask(&pdev->dev); + } return 1; } @@ -2203,6 +2346,9 @@ static int __init iommu_prepare_static_identity_mapping(int hw) return -EFAULT; for_each_pci_dev(pdev) { + /* Skip Host/PCI Bridge devices */ + if (IS_BRIDGE_HOST_DEVICE(pdev)) + continue; if (iommu_should_identity_map(pdev, 1)) { printk(KERN_INFO "IOMMU: %s identity mapping for device %s\n", hw ? "hardware" : "software", pci_name(pdev)); @@ -2218,7 +2364,7 @@ static int __init iommu_prepare_static_identity_mapping(int hw) return 0; } -static int __init init_dmars(int force_on) +static int __init init_dmars(void) { struct dmar_drhd_unit *drhd; struct dmar_rmrr_unit *rmrr; @@ -2592,8 +2738,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, iommu = domain_get_iommu(domain); size = aligned_nrpages(paddr, size); - iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), - pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), dma_mask); if (!iova) goto error; @@ -3118,7 +3263,17 @@ static int init_iommu_hw(void) if (iommu->qi) dmar_reenable_qi(iommu); - for_each_active_iommu(iommu, drhd) { + for_each_iommu(iommu, drhd) { + if (drhd->ignored) { + /* + * we always have to disable PMRs or DMA may fail on + * this device + */ + if (force_on) + iommu_disable_protect_mem_regions(iommu); + continue; + } + iommu_flush_write_buffer(iommu); iommu_set_root_entry(iommu); @@ -3127,7 +3282,8 @@ static int init_iommu_hw(void) DMA_CCMD_GLOBAL_INVL); iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); - iommu_enable_translation(iommu); + if (iommu_enable_translation(iommu)) + return 1; iommu_disable_protect_mem_regions(iommu); } @@ -3194,7 +3350,10 @@ static void iommu_resume(void) unsigned long flag; if (init_iommu_hw()) { - WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); + if (force_on) + panic("tboot: IOMMU setup failed, DMAR can not resume!\n"); + else + WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); return; } @@ -3229,7 +3388,7 @@ static void __init init_iommu_pm_ops(void) } #else -static inline int init_iommu_pm_ops(void) { } +static inline void init_iommu_pm_ops(void) {} #endif /* CONFIG_PM */ /* @@ -3271,7 +3430,6 @@ static struct notifier_block device_nb = { int __init intel_iommu_init(void) { int ret = 0; - int force_on = 0; /* VT-d is required for a TXT/tboot launch, so enforce that */ force_on = tboot_force_iommu(); @@ -3309,7 +3467,7 @@ int __init intel_iommu_init(void) init_no_remapping_devices(); - ret = init_dmars(force_on); + ret = init_dmars(); if (ret) { if (force_on) panic("tboot: Failed to initialize DMARs\n"); @@ -3380,8 +3538,8 @@ static void domain_remove_one_dev_info(struct dmar_domain *domain, spin_lock_irqsave(&device_domain_lock, flags); list_for_each_safe(entry, tmp, &domain->devices) { info = list_entry(entry, struct device_domain_info, link); - /* No need to compare PCI domain; it has to be the same */ - if (info->bus == pdev->bus->number && + if (info->segment == pci_domain_nr(pdev->bus) && + info->bus == pdev->bus->number && info->devfn == pdev->devfn) { list_del(&info->link); list_del(&info->global); @@ -3419,10 +3577,13 @@ static void domain_remove_one_dev_info(struct dmar_domain *domain, domain_update_iommu_cap(domain); spin_unlock_irqrestore(&domain->iommu_lock, tmp_flags); - spin_lock_irqsave(&iommu->lock, tmp_flags); - clear_bit(domain->id, iommu->domain_ids); - iommu->domains[domain->id] = NULL; - spin_unlock_irqrestore(&iommu->lock, tmp_flags); + if (!(domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE) && + !(domain->flags & DOMAIN_FLAG_STATIC_IDENTITY)) { + spin_lock_irqsave(&iommu->lock, tmp_flags); + clear_bit(domain->id, iommu->domain_ids); + iommu->domains[domain->id] = NULL; + spin_unlock_irqrestore(&iommu->lock, tmp_flags); + } } spin_unlock_irqrestore(&device_domain_lock, flags); @@ -3505,6 +3666,7 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width) domain->iommu_count = 0; domain->iommu_coherency = 0; domain->iommu_snooping = 0; + domain->iommu_superpage = 0; domain->max_addr = 0; domain->nid = -1; @@ -3720,7 +3882,7 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, struct dma_pte *pte; u64 phys = 0; - pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT); + pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT, 0); if (pte) phys = dma_pte_addr(pte); diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c index 9606e599a475..c5c274ab5c5a 100644 --- a/drivers/pci/iova.c +++ b/drivers/pci/iova.c @@ -63,8 +63,16 @@ __cached_rbnode_delete_update(struct iova_domain *iovad, struct iova *free) curr = iovad->cached32_node; cached_iova = container_of(curr, struct iova, node); - if (free->pfn_lo >= cached_iova->pfn_lo) - iovad->cached32_node = rb_next(&free->node); + if (free->pfn_lo >= cached_iova->pfn_lo) { + struct rb_node *node = rb_next(&free->node); + struct iova *iova = container_of(node, struct iova, node); + + /* only cache if it's below 32bit pfn */ + if (node && iova->pfn_lo < iovad->dma_32bit_pfn) + iovad->cached32_node = node; + else + iovad->cached32_node = NULL; + } } /* Computes the padding size required, to make the diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 135df164a4c1..46767c53917a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev) * system from the sleep state, we'll have to prevent it from signaling * wake-up. */ - pm_runtime_resume(dev); + pm_runtime_get_sync(dev); if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev) if (drv && drv->pm && drv->pm->complete) drv->pm->complete(dev); + + pm_runtime_put_sync(dev); } #else /* !CONFIG_PM_SLEEP */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 56098b3e17c0..692671b11667 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3271,11 +3271,11 @@ void __init pci_register_set_vga_state(arch_set_vga_state_t func) } static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, - unsigned int command_bits, bool change_bridge) + unsigned int command_bits, u32 flags) { if (arch_set_vga_state) return arch_set_vga_state(dev, decode, command_bits, - change_bridge); + flags); return 0; } @@ -3284,7 +3284,7 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, * @dev: the PCI device * @decode: true = enable decoding, false = disable decoding * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge_flags: traverse ancestors and change bridges + * @flags: traverse ancestors and change bridges * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE */ int pci_set_vga_state(struct pci_dev *dev, bool decode, @@ -3483,6 +3483,8 @@ static int __init pci_setup(char *str) pci_no_msi(); } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strncmp(str, "realloc", 7)) { + pci_realloc(); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); } else if (!strncmp(str, "cbiosize=", 9)) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 731e20265ace..3a39bf1f1e2c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -146,6 +146,8 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif +extern void pci_realloc(void); + static inline int pci_no_d1d2(struct pci_dev *dev) { unsigned int parent_dstates = 0; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 48849ffdd672..bafb3c3d4a89 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -168,7 +168,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; if (type == pci_bar_io) { l &= PCI_BASE_ADDRESS_IO_MASK; - mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; + mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT; } else { l &= PCI_BASE_ADDRESS_MEM_MASK; mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e8a140669f90..02145e9697a9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ #if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 1e9e5a5b8c81..9995842e45b5 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -47,6 +47,13 @@ struct resource_list_x { (head)->next = NULL; \ } while (0) +int pci_realloc_enable = 0; +#define pci_realloc_enabled() pci_realloc_enable +void pci_realloc(void) +{ + pci_realloc_enable = 1; +} + /** * add_to_list() - add a new resource tracker to the list * @head: Head of the list @@ -1025,6 +1032,7 @@ static int __init pci_get_max_depth(void) return depth; } + /* * first try will not touch pci bridge res * second and later try will clear small leaf bridge res @@ -1068,6 +1076,13 @@ again: /* any device complain? */ if (!head.next) goto enable_and_dump; + + /* don't realloc if asked to do so */ + if (!pci_realloc_enabled()) { + free_list(resource_list_x, &head); + goto enable_and_dump; + } + failed_type = 0; for (list = head.next; list;) { failed_type |= list->flags; diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index 435002dfc3ca..e956f659089a 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -11,6 +11,7 @@ * */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -75,10 +76,10 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { if (skt->nr == 0) - gpio_request_array(vpac270_pcmcia_gpios, + gpio_free_array(vpac270_pcmcia_gpios, ARRAY_SIZE(vpac270_pcmcia_gpios)); else - gpio_request_array(vpac270_cf_gpios, + gpio_free_array(vpac270_cf_gpios, ARRAY_SIZE(vpac270_cf_gpios)); } diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 005417bd429e..e1c4938b301b 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1156,9 +1156,9 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) struct wmid3_gds_input_param params = { .function_num = 0x1, .hotkey_number = 0x01, - .devices = ACER_WMID3_GDS_WIRELESS & - ACER_WMID3_GDS_THREEG & - ACER_WMID3_GDS_WIMAX & + .devices = ACER_WMID3_GDS_WIRELESS | + ACER_WMID3_GDS_THREEG | + ACER_WMID3_GDS_WIMAX | ACER_WMID3_GDS_BLUETOOTH, }; struct acpi_buffer input = { @@ -1445,6 +1445,8 @@ static void acer_wmi_notify(u32 value, void *context) union acpi_object *obj; struct event_return_value return_value; acpi_status status; + u16 device_state; + const struct key_entry *key; status = wmi_get_event_data(value, &response); if (status != AE_OK) { @@ -1472,23 +1474,32 @@ static void acer_wmi_notify(u32 value, void *context) switch (return_value.function) { case WMID_HOTKEY_EVENT: - if (return_value.device_state) { - u16 device_state = return_value.device_state; - pr_debug("device state: 0x%x\n", device_state); - if (has_cap(ACER_CAP_WIRELESS)) - rfkill_set_sw_state(wireless_rfkill, - !(device_state & ACER_WMID3_GDS_WIRELESS)); - if (has_cap(ACER_CAP_BLUETOOTH)) - rfkill_set_sw_state(bluetooth_rfkill, - !(device_state & ACER_WMID3_GDS_BLUETOOTH)); - if (has_cap(ACER_CAP_THREEG)) - rfkill_set_sw_state(threeg_rfkill, - !(device_state & ACER_WMID3_GDS_THREEG)); - } - if (!sparse_keymap_report_event(acer_wmi_input_dev, - return_value.key_num, 1, true)) + device_state = return_value.device_state; + pr_debug("device state: 0x%x\n", device_state); + + key = sparse_keymap_entry_from_scancode(acer_wmi_input_dev, + return_value.key_num); + if (!key) { pr_warn("Unknown key number - 0x%x\n", return_value.key_num); + } else { + switch (key->keycode) { + case KEY_WLAN: + case KEY_BLUETOOTH: + if (has_cap(ACER_CAP_WIRELESS)) + rfkill_set_sw_state(wireless_rfkill, + !(device_state & ACER_WMID3_GDS_WIRELESS)); + if (has_cap(ACER_CAP_THREEG)) + rfkill_set_sw_state(threeg_rfkill, + !(device_state & ACER_WMID3_GDS_THREEG)); + if (has_cap(ACER_CAP_BLUETOOTH)) + rfkill_set_sw_state(bluetooth_rfkill, + !(device_state & ACER_WMID3_GDS_BLUETOOTH)); + break; + } + sparse_keymap_report_entry(acer_wmi_input_dev, key, + 1, true); + } break; default: pr_warn("Unknown function number - %d - %d\n", diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 00460cb9587b..3c7857c71a23 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1025,6 +1025,7 @@ static int asus_wmi_backlight_init(struct asus_wmi *asus) return power; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = max; bd = backlight_device_register(asus->driver->name, &asus->platform_device->dev, asus, diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 3f204fde1b02..8877b836d27c 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -1030,8 +1030,10 @@ static int __devinit compal_probe(struct platform_device *pdev) initialize_fan_control_data(data); err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group); - if (err) + if (err) { + kfree(data); return err; + } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index d3841de6a8cf..e39ab1d3ed87 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -292,12 +292,9 @@ static int dell_rfkill_set(void *data, bool blocked) dell_send_request(buffer, 17, 11); /* If the hardware switch controls this radio, and the hardware - switch is disabled, don't allow changing the software state. - If the hardware switch is reported as not supported, always - fire the SMI to toggle the killswitch. */ + switch is disabled, don't allow changing the software state */ if ((hwswitch_state & BIT(hwswitch_bit)) && - !(buffer->output[1] & BIT(16)) && - (buffer->output[1] & BIT(0))) { + !(buffer->output[1] & BIT(16))) { ret = -EINVAL; goto out; } @@ -403,23 +400,6 @@ static const struct file_operations dell_debugfs_fops = { static void dell_update_rfkill(struct work_struct *ignored) { - int status; - - get_buffer(); - dell_send_request(buffer, 17, 11); - status = buffer->output[1]; - release_buffer(); - - /* if hardware rfkill is not supported, set it explicitly */ - if (!(status & BIT(0))) { - if (wifi_rfkill) - dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17)); - if (bluetooth_rfkill) - dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18)); - if (wwan_rfkill) - dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19)); - } - if (wifi_rfkill) dell_rfkill_query(wifi_rfkill, (void *)1); if (bluetooth_rfkill) @@ -560,11 +540,11 @@ static int dell_get_intensity(struct backlight_device *bd) else dell_send_request(buffer, 0, 1); + ret = buffer->output[1]; + out: release_buffer(); - if (ret) - return ret; - return buffer->output[1]; + return ret; } static const struct backlight_ops dell_ops = { diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index f94017bcdd6e..e2faa3cbb792 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -207,6 +207,7 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, }; struct acpi_buffer input = { sizeof(struct bios_args), &args }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 rc; if (WARN_ON(insize > sizeof(args.data))) return -EINVAL; @@ -224,13 +225,13 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, } bios_return = (struct bios_return *)obj->buffer.pointer; + rc = bios_return->return_code; - if (bios_return->return_code) { - if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE) - pr_warn("query 0x%x returned error 0x%x\n", - query, bios_return->return_code); + if (rc) { + if (rc != HPWMI_RET_UNKNOWN_CMDTYPE) + pr_warn("query 0x%x returned error 0x%x\n", query, rc); kfree(obj); - return bios_return->return_code; + return rc; } if (!outsize) { diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index e936364a609d..7f88c7923fc6 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -250,6 +250,7 @@ static int oaktrail_backlight_init(void) struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; bd = backlight_device_register(DRIVER_NAME, &oaktrail_device->dev, NULL, diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 77f6e707a2a9..26c5b117df22 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -184,6 +184,10 @@ enum tpacpi_hkey_event_t { /* Misc bay events */ TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */ + TP_HKEY_EV_HOTPLUG_DOCK = 0x4010, /* docked into hotplug dock + or port replicator */ + TP_HKEY_EV_HOTPLUG_UNDOCK = 0x4011, /* undocked from hotplug + dock or port replicator */ /* User-interface events */ TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */ @@ -194,6 +198,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */ TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */ + /* Key-related user-interface events */ + TP_HKEY_EV_KEY_NUMLOCK = 0x6000, /* NumLock key pressed */ + TP_HKEY_EV_KEY_FN = 0x6005, /* Fn key pressed? E420 */ + /* Thermal events */ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */ @@ -201,6 +209,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */ + TP_HKEY_EV_UNK_6040 = 0x6040, /* Related to AC change? + some sort of APM hint, + W520 */ + /* Misc */ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */ }; @@ -3513,6 +3525,34 @@ static bool hotkey_notify_wakeup(const u32 hkey, return true; } +static bool hotkey_notify_dockevent(const u32 hkey, + bool *send_acpi_ev, + bool *ignore_acpi_ev) +{ + /* 0x4000-0x4FFF: dock-related events */ + *send_acpi_ev = true; + *ignore_acpi_ev = false; + + switch (hkey) { + case TP_HKEY_EV_UNDOCK_ACK: + /* ACPI undock operation completed after wakeup */ + hotkey_autosleep_ack = 1; + pr_info("undocked\n"); + hotkey_wakeup_hotunplug_complete_notify_change(); + return true; + + case TP_HKEY_EV_HOTPLUG_DOCK: /* docked to port replicator */ + pr_info("docked into hotplug port replicator\n"); + return true; + case TP_HKEY_EV_HOTPLUG_UNDOCK: /* undocked from port replicator */ + pr_info("undocked from hotplug port replicator\n"); + return true; + + default: + return false; + } +} + static bool hotkey_notify_usrevent(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) @@ -3547,13 +3587,13 @@ static bool hotkey_notify_usrevent(const u32 hkey, static void thermal_dump_all_sensors(void); -static bool hotkey_notify_thermal(const u32 hkey, +static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) { bool known = true; - /* 0x6000-0x6FFF: thermal alarms */ + /* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */ *send_acpi_ev = true; *ignore_acpi_ev = false; @@ -3582,8 +3622,17 @@ static bool hotkey_notify_thermal(const u32 hkey, "a sensor reports something is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; + + case TP_HKEY_EV_KEY_NUMLOCK: + case TP_HKEY_EV_KEY_FN: + /* key press events, we just ignore them as long as the EC + * is still reporting them in the normal keyboard stream */ + *send_acpi_ev = false; + *ignore_acpi_ev = true; + return true; + default: - pr_alert("THERMAL ALERT: unknown thermal alarm received\n"); + pr_warn("unknown possible thermal alarm or keyboard event received\n"); known = false; } @@ -3652,15 +3701,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } break; case 4: - /* 0x4000-0x4FFF: dock-related wakeups */ - if (hkey == TP_HKEY_EV_UNDOCK_ACK) { - hotkey_autosleep_ack = 1; - pr_info("undocked\n"); - hotkey_wakeup_hotunplug_complete_notify_change(); - known_ev = true; - } else { - known_ev = false; - } + /* 0x4000-0x4FFF: dock-related events */ + known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev, + &ignore_acpi_ev); break; case 5: /* 0x5000-0x5FFF: human interface helpers */ @@ -3668,8 +3711,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) &ignore_acpi_ev); break; case 6: - /* 0x6000-0x6FFF: thermal alarms */ - known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev, + /* 0x6000-0x6FFF: thermal alarms/notices and + * keyboard events */ + known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev, &ignore_acpi_ev); break; case 7: diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index a8d03aeb4051..e7f301da2902 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -46,7 +46,8 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) caps.n_ext_ts = ptp->info->n_ext_ts; caps.n_per_out = ptp->info->n_per_out; caps.pps = ptp->info->pps; - err = copy_to_user((void __user *)arg, &caps, sizeof(caps)); + if (copy_to_user((void __user *)arg, &caps, sizeof(caps))) + err = -EFAULT; break; case PTP_EXTTS_REQUEST: @@ -129,8 +130,10 @@ ssize_t ptp_read(struct posix_clock *pc, return -ERESTARTSYS; } - if (ptp->defunct) + if (ptp->defunct) { + mutex_unlock(&ptp->tsevq_mux); return -ENODEV; + } spin_lock_irqsave(&queue->lock, flags); @@ -150,10 +153,8 @@ ssize_t ptp_read(struct posix_clock *pc, mutex_unlock(&ptp->tsevq_mux); - if (copy_to_user(buf, event, cnt)) { - mutex_unlock(&ptp->tsevq_mux); + if (copy_to_user(buf, event, cnt)) return -EFAULT; - } return cnt; } diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index e5f7b8fe51f4..2bb8f451cc06 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -266,7 +266,7 @@ static struct regulator_ops db8500_regulator_switch_ops = { * Regulator information */ static struct db8500_regulator_info - db8500_regulator_info[DB8500_NUM_REGULATORS] = { +db8500_regulator_info[DB8500_NUM_REGULATORS] = { [DB8500_REGULATOR_VAPE] = { .desc = { .name = "db8500-vape", @@ -492,11 +492,9 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev) info->desc.name, err); /* if failing, unregister all earlier regulators */ - i--; - while (i >= 0) { + while (--i >= 0) { info = &db8500_regulator_info[i]; regulator_unregister(info->rdev); - i--; } return err; } @@ -536,13 +534,7 @@ static struct platform_driver db8500_regulator_driver = { static int __init db8500_regulator_init(void) { - int ret; - - ret = platform_driver_register(&db8500_regulator_driver); - if (ret < 0) - return -ENODEV; - - return 0; + return platform_driver_register(&db8500_regulator_driver); } static void __exit db8500_regulator_exit(void) diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index daff7fd0e95c..486ed8141fcd 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -139,7 +139,7 @@ static int max8952_set_voltage(struct regulator_dev *rdev, s8 vid = -1, i; if (!gpio_is_valid(max8952->pdata->gpio_vid0) || - !gpio_is_valid(max8952->pdata->gpio_vid0)) { + !gpio_is_valid(max8952->pdata->gpio_vid1)) { /* DVS not supported */ return -EPERM; } diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 10d5a1d9768e..ad6628ca94f4 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -39,25 +39,28 @@ struct max8997_data { struct regulator_dev **rdev; int ramp_delay; /* in mV/us */ + bool buck1_gpiodvs; + bool buck2_gpiodvs; + bool buck5_gpiodvs; u8 buck1_vol[8]; u8 buck2_vol[8]; u8 buck5_vol[8]; + int buck125_gpios[3]; int buck125_gpioindex; + bool ignore_gpiodvs_side_effect; u8 saved_states[MAX8997_REG_MAX]; }; static inline void max8997_set_gpio(struct max8997_data *max8997) { - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int set3 = (max8997->buck125_gpioindex) & 0x1; int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; - gpio_set_value(pdata->buck125_gpios[0], set1); - gpio_set_value(pdata->buck125_gpios[1], set2); - gpio_set_value(pdata->buck125_gpios[2], set3); + gpio_set_value(max8997->buck125_gpios[0], set1); + gpio_set_value(max8997->buck125_gpios[1], set2); + gpio_set_value(max8997->buck125_gpios[2], set3); } struct voltage_map_desc { @@ -380,8 +383,6 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev, static int max8997_get_voltage(struct regulator_dev *rdev) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); struct i2c_client *i2c = max8997->iodev->i2c; int reg, shift, mask, ret; int rid = max8997_get_rid(rdev); @@ -391,9 +392,9 @@ static int max8997_get_voltage(struct regulator_dev *rdev) if (ret) return ret; - if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) || - (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) || - (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs)) + if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) || + (rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) || + (rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs)) reg += max8997->buck125_gpioindex; ret = max8997_read_reg(i2c, reg, &val); @@ -543,7 +544,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) { /* If the voltage is increasing */ if (org < i) - udelay(desc->step * (i - org) / max8997->ramp_delay); + udelay(DIV_ROUND_UP(desc->step * (i - org), + max8997->ramp_delay)); } return ret; @@ -561,8 +563,6 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, u8 new_val, int *best) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); u8 *buckx_val[3]; bool buckx_gpiodvs[3]; @@ -589,9 +589,9 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, buckx_val[0] = max8997->buck1_vol; buckx_val[1] = max8997->buck2_vol; buckx_val[2] = max8997->buck5_vol; - buckx_gpiodvs[0] = pdata->buck1_gpiodvs; - buckx_gpiodvs[1] = pdata->buck2_gpiodvs; - buckx_gpiodvs[2] = pdata->buck5_gpiodvs; + buckx_gpiodvs[0] = max8997->buck1_gpiodvs; + buckx_gpiodvs[1] = max8997->buck2_gpiodvs; + buckx_gpiodvs[2] = max8997->buck5_gpiodvs; for (i = 0; i < 8; i++) { int others; @@ -640,8 +640,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); const struct voltage_map_desc *desc; int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; @@ -653,15 +651,15 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, switch (rid) { case MAX8997_BUCK1: - if (pdata->buck1_gpiodvs) + if (max8997->buck1_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK2: - if (pdata->buck2_gpiodvs) + if (max8997->buck2_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK5: - if (pdata->buck5_gpiodvs) + if (max8997->buck5_gpiodvs) gpio_dvs_mode = true; break; } @@ -695,7 +693,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, new_idx = tmp_idx; new_val = tmp_val; - if (pdata->ignore_gpiodvs_side_effect == false) + if (max8997->ignore_gpiodvs_side_effect == false) return -EINVAL; dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:" @@ -993,6 +991,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) i2c = max8997->iodev->i2c; max8997->buck125_gpioindex = pdata->buck125_default_idx; + max8997->buck1_gpiodvs = pdata->buck1_gpiodvs; + max8997->buck2_gpiodvs = pdata->buck2_gpiodvs; + max8997->buck5_gpiodvs = pdata->buck5_gpiodvs; + memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3); + max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect; for (i = 0; i < 8; i++) { max8997->buck1_vol[i] = ret = @@ -1124,6 +1127,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) 0x3f); } + /* Misc Settings */ + max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ + max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); + for (i = 0; i < pdata->num_regulators; i++) { const struct voltage_map_desc *desc; int id = pdata->regulators[i].id; @@ -1148,10 +1155,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) } } - /* Misc Settings */ - max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ - max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); - return 0; err: for (i = 0; i < max8997->num_regulators; i++) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index f822e13dc04b..ce2aabf5c550 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1051,4 +1051,13 @@ config RTC_DRV_TILE Enable support for the Linux driver side of the Tilera hypervisor's real-time clock interface. +config RTC_DRV_PUV3 + tristate "PKUnity v3 RTC support" + depends on ARCH_PUV3 + help + This enables support for the RTC in the PKUnity-v3 SoCs. + + This drive can also be built as a module. If so, the module + will be called rtc-puv3. + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 213d725f16d4..0ffefe877bfa 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -78,6 +78,7 @@ obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o +obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index ef6316acec43..df68618f6dbb 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -318,7 +318,7 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_read_alarm); -int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { struct rtc_time tm; long now, scheduled; diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index d0e06edb14c5..cace6d3aed9a 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -421,7 +421,8 @@ static long rtc_dev_ioctl(struct file *file, err = ops->ioctl(rtc->dev.parent, cmd, arg); if (err == -ENOIOCTLCMD) err = -ENOTTY; - } + } else + err = -ENOTTY; break; } diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 4724ba3acf1a..b2005b44e4f7 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -149,6 +149,7 @@ static const struct i2c_device_id ds1307_id[] = { { "ds1340", ds_1340 }, { "ds3231", ds_3231 }, { "m41t00", m41t00 }, + { "pt7c4338", ds_1307 }, { "rx8025", rx_8025 }, { } }; diff --git a/drivers/rtc/rtc-m41t93.c b/drivers/rtc/rtc-m41t93.c index 1a84b3e227d1..7317d3b9a3d5 100644 --- a/drivers/rtc/rtc-m41t93.c +++ b/drivers/rtc/rtc-m41t93.c @@ -189,7 +189,7 @@ static int __devinit m41t93_probe(struct spi_device *spi) static int __devexit m41t93_remove(struct spi_device *spi) { - struct rtc_device *rtc = platform_get_drvdata(spi); + struct rtc_device *rtc = spi_get_drvdata(spi); if (rtc) rtc_device_unregister(rtc); diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c new file mode 100644 index 000000000000..46f14b82f3ab --- /dev/null +++ b/drivers/rtc/rtc-puv3.c @@ -0,0 +1,359 @@ +/* + * RTC driver code specific to PKUnity SoC and UniCore ISA + * + * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> + * Copyright (C) 2001-2010 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/clk.h> +#include <linux/log2.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +static struct resource *puv3_rtc_mem; + +static int puv3_rtc_alarmno = IRQ_RTCAlarm; +static int puv3_rtc_tickno = IRQ_RTC; + +static DEFINE_SPINLOCK(puv3_rtc_pie_lock); + +/* IRQ Handlers */ +static irqreturn_t puv3_rtc_alarmirq(int irq, void *id) +{ + struct rtc_device *rdev = id; + + writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR); + rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF); + return IRQ_HANDLED; +} + +static irqreturn_t puv3_rtc_tickirq(int irq, void *id) +{ + struct rtc_device *rdev = id; + + writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR); + rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF); + return IRQ_HANDLED; +} + +/* Update control registers */ +static void puv3_rtc_setaie(int to) +{ + unsigned int tmp; + + pr_debug("%s: aie=%d\n", __func__, to); + + tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE; + + if (to) + tmp |= RTC_RTSR_ALE; + + writel(tmp, RTC_RTSR); +} + +static int puv3_rtc_setpie(struct device *dev, int enabled) +{ + unsigned int tmp; + + pr_debug("%s: pie=%d\n", __func__, enabled); + + spin_lock_irq(&puv3_rtc_pie_lock); + tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE; + + if (enabled) + tmp |= RTC_RTSR_HZE; + + writel(tmp, RTC_RTSR); + spin_unlock_irq(&puv3_rtc_pie_lock); + + return 0; +} + +/* Time read/write */ +static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) +{ + rtc_time_to_tm(readl(RTC_RCNR), rtc_tm); + + pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n", + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, + rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); + + return 0; +} + +static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + unsigned long rtc_count = 0; + + pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + rtc_tm_to_time(tm, &rtc_count); + writel(rtc_count, RTC_RCNR); + + return 0; +} + +static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct rtc_time *alm_tm = &alrm->time; + + rtc_time_to_tm(readl(RTC_RTAR), alm_tm); + + alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE; + + pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n", + alrm->enabled, + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday, + alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec); + + return 0; +} + +static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct rtc_time *tm = &alrm->time; + unsigned long rtcalarm_count = 0; + + pr_debug("puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n", + alrm->enabled, + tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff, + tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec); + + rtc_tm_to_time(tm, &rtcalarm_count); + writel(rtcalarm_count, RTC_RTAR); + + puv3_rtc_setaie(alrm->enabled); + + if (alrm->enabled) + enable_irq_wake(puv3_rtc_alarmno); + else + disable_irq_wake(puv3_rtc_alarmno); + + return 0; +} + +static int puv3_rtc_proc(struct device *dev, struct seq_file *seq) +{ + seq_printf(seq, "periodic_IRQ\t: %s\n", + (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no"); + return 0; +} + +static int puv3_rtc_open(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_device *rtc_dev = platform_get_drvdata(pdev); + int ret; + + ret = request_irq(puv3_rtc_alarmno, puv3_rtc_alarmirq, + IRQF_DISABLED, "pkunity-rtc alarm", rtc_dev); + + if (ret) { + dev_err(dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret); + return ret; + } + + ret = request_irq(puv3_rtc_tickno, puv3_rtc_tickirq, + IRQF_DISABLED, "pkunity-rtc tick", rtc_dev); + + if (ret) { + dev_err(dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret); + goto tick_err; + } + + return ret; + + tick_err: + free_irq(puv3_rtc_alarmno, rtc_dev); + return ret; +} + +static void puv3_rtc_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_device *rtc_dev = platform_get_drvdata(pdev); + + /* do not clear AIE here, it may be needed for wake */ + puv3_rtc_setpie(dev, 0); + free_irq(puv3_rtc_alarmno, rtc_dev); + free_irq(puv3_rtc_tickno, rtc_dev); +} + +static const struct rtc_class_ops puv3_rtcops = { + .open = puv3_rtc_open, + .release = puv3_rtc_release, + .read_time = puv3_rtc_gettime, + .set_time = puv3_rtc_settime, + .read_alarm = puv3_rtc_getalarm, + .set_alarm = puv3_rtc_setalarm, + .proc = puv3_rtc_proc, +}; + +static void puv3_rtc_enable(struct platform_device *pdev, int en) +{ + if (!en) { + writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR); + } else { + /* re-enable the device, and check it is ok */ + if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) { + dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); + writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR); + } + } +} + +static int puv3_rtc_remove(struct platform_device *dev) +{ + struct rtc_device *rtc = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + rtc_device_unregister(rtc); + + puv3_rtc_setpie(&dev->dev, 0); + puv3_rtc_setaie(0); + + release_resource(puv3_rtc_mem); + kfree(puv3_rtc_mem); + + return 0; +} + +static int puv3_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + struct resource *res; + int ret; + + pr_debug("%s: probe=%p\n", __func__, pdev); + + /* find the IRQs */ + puv3_rtc_tickno = platform_get_irq(pdev, 1); + if (puv3_rtc_tickno < 0) { + dev_err(&pdev->dev, "no irq for rtc tick\n"); + return -ENOENT; + } + + puv3_rtc_alarmno = platform_get_irq(pdev, 0); + if (puv3_rtc_alarmno < 0) { + dev_err(&pdev->dev, "no irq for alarm\n"); + return -ENOENT; + } + + pr_debug("PKUnity_rtc: tick irq %d, alarm irq %d\n", + puv3_rtc_tickno, puv3_rtc_alarmno); + + /* get the memory region */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get memory region resource\n"); + return -ENOENT; + } + + puv3_rtc_mem = request_mem_region(res->start, + res->end-res->start+1, + pdev->name); + + if (puv3_rtc_mem == NULL) { + dev_err(&pdev->dev, "failed to reserve memory region\n"); + ret = -ENOENT; + goto err_nores; + } + + puv3_rtc_enable(pdev, 1); + + /* register RTC and exit */ + rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops, + THIS_MODULE); + + if (IS_ERR(rtc)) { + dev_err(&pdev->dev, "cannot attach rtc\n"); + ret = PTR_ERR(rtc); + goto err_nortc; + } + + /* platform setup code should have handled this; sigh */ + if (!device_can_wakeup(&pdev->dev)) + device_init_wakeup(&pdev->dev, 1); + + platform_set_drvdata(pdev, rtc); + return 0; + + err_nortc: + puv3_rtc_enable(pdev, 0); + release_resource(puv3_rtc_mem); + + err_nores: + return ret; +} + +#ifdef CONFIG_PM + +static int ticnt_save; + +static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* save RTAR for anyone using periodic interrupts */ + ticnt_save = readl(RTC_RTAR); + puv3_rtc_enable(pdev, 0); + return 0; +} + +static int puv3_rtc_resume(struct platform_device *pdev) +{ + puv3_rtc_enable(pdev, 1); + writel(ticnt_save, RTC_RTAR); + return 0; +} +#else +#define puv3_rtc_suspend NULL +#define puv3_rtc_resume NULL +#endif + +static struct platform_driver puv3_rtcdrv = { + .probe = puv3_rtc_probe, + .remove = __devexit_p(puv3_rtc_remove), + .suspend = puv3_rtc_suspend, + .resume = puv3_rtc_resume, + .driver = { + .name = "PKUnity-v3-RTC", + .owner = THIS_MODULE, + } +}; + +static char __initdata banner[] = "PKUnity-v3 RTC, (c) 2009 PKUnity Co.\n"; + +static int __init puv3_rtc_init(void) +{ + printk(banner); + return platform_driver_register(&puv3_rtcdrv); +} + +static void __exit puv3_rtc_exit(void) +{ + platform_driver_unregister(&puv3_rtcdrv); +} + +module_init(puv3_rtc_init); +module_exit(puv3_rtc_exit); + +MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip"); +MODULE_AUTHOR("Hu Dongliang"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index b8bc862903ae..efd6066b5cd2 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -78,7 +78,6 @@ struct vt8500_rtc { void __iomem *regbase; struct resource *res; int irq_alarm; - int irq_hz; struct rtc_device *rtc; spinlock_t lock; /* Protects this structure */ }; @@ -100,10 +99,6 @@ static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id) if (isr & 1) events |= RTC_AF | RTC_IRQF; - /* Only second/minute interrupts are supported */ - if (isr & 2) - events |= RTC_UF | RTC_IRQF; - rtc_update_irq(vt8500_rtc->rtc, 1, events); return IRQ_HANDLED; @@ -199,27 +194,12 @@ static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled) -{ - struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev); - unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR); - - if (enabled) - tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE; - else - tmp &= ~VT8500_RTC_CR_SM_ENABLE; - - writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR); - return 0; -} - static const struct rtc_class_ops vt8500_rtc_ops = { .read_time = vt8500_rtc_read_time, .set_time = vt8500_rtc_set_time, .read_alarm = vt8500_rtc_read_alarm, .set_alarm = vt8500_rtc_set_alarm, .alarm_irq_enable = vt8500_alarm_irq_enable, - .update_irq_enable = vt8500_update_irq_enable, }; static int __devinit vt8500_rtc_probe(struct platform_device *pdev) @@ -248,13 +228,6 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_free; } - vt8500_rtc->irq_hz = platform_get_irq(pdev, 1); - if (vt8500_rtc->irq_hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - ret = -ENXIO; - goto err_free; - } - vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start, resource_size(vt8500_rtc->res), "vt8500-rtc"); @@ -272,9 +245,8 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_release; } - /* Enable the second/minute interrupt generation and enable RTC */ - writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H - | VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC, + /* Enable RTC and set it to 24-hour mode */ + writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H, vt8500_rtc->regbase + VT8500_RTC_CR); vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev, @@ -286,26 +258,16 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_unmap; } - ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0, - "rtc 1Hz", vt8500_rtc); - if (ret < 0) { - dev_err(&pdev->dev, "can't get irq %i, err %d\n", - vt8500_rtc->irq_hz, ret); - goto err_unreg; - } - ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0, "rtc alarm", vt8500_rtc); if (ret < 0) { dev_err(&pdev->dev, "can't get irq %i, err %d\n", vt8500_rtc->irq_alarm, ret); - goto err_free_hz; + goto err_unreg; } return 0; -err_free_hz: - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); err_unreg: rtc_device_unregister(vt8500_rtc->rtc); err_unmap: @@ -323,7 +285,6 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev) struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev); free_irq(vt8500_rtc->irq_alarm, vt8500_rtc); - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); rtc_device_unregister(vt8500_rtc->rtc); diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 55e8f721e38a..570d4da10696 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -416,7 +416,7 @@ static void process_buffer_error(struct qdio_q *q, int count) /* special handling for no target buffer empty */ if ((!q->is_input_q && - (q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) { + (q->sbal[q->first_to_check]->element[15].sflags) == 0x10)) { qperf_inc(q, target_full); DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x", q->first_to_check); @@ -427,8 +427,8 @@ static void process_buffer_error(struct qdio_q *q, int count) DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr); DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count); DBF_ERROR("F14:%2x F15:%2x", - q->sbal[q->first_to_check]->element[14].flags & 0xff, - q->sbal[q->first_to_check]->element[15].flags & 0xff); + q->sbal[q->first_to_check]->element[14].sflags, + q->sbal[q->first_to_check]->element[15].sflags); /* * Interrupts may be avoided as long as the error is present diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 55c6aa1c9704..d3cee33e554c 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -361,7 +361,7 @@ enum qeth_header_ids { static inline int qeth_is_last_sbale(struct qdio_buffer_element *sbale) { - return (sbale->flags & SBAL_FLAGS_LAST_ENTRY); + return (sbale->eflags & SBAL_EFLAGS_LAST_ENTRY); } enum qeth_qdio_buffer_states { diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 503678a30981..dd08f7b42fb8 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -890,7 +890,7 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, struct sk_buff *skb; /* is PCI flag set on buffer? */ - if (buf->buffer->element[0].flags & 0x40) + if (buf->buffer->element[0].sflags & SBAL_SFLAGS0_PCI_REQ) atomic_dec(&queue->set_pci_flags_count); skb = skb_dequeue(&buf->skb_list); @@ -906,9 +906,11 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, buf->is_header[i] = 0; buf->buffer->element[i].length = 0; buf->buffer->element[i].addr = NULL; - buf->buffer->element[i].flags = 0; + buf->buffer->element[i].eflags = 0; + buf->buffer->element[i].sflags = 0; } - buf->buffer->element[15].flags = 0; + buf->buffer->element[15].eflags = 0; + buf->buffer->element[15].sflags = 0; buf->next_element_to_fill = 0; atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY); } @@ -2368,9 +2370,10 @@ static int qeth_init_input_buffer(struct qeth_card *card, buf->buffer->element[i].length = PAGE_SIZE; buf->buffer->element[i].addr = pool_entry->elements[i]; if (i == QETH_MAX_BUFFER_ELEMENTS(card) - 1) - buf->buffer->element[i].flags = SBAL_FLAGS_LAST_ENTRY; + buf->buffer->element[i].eflags = SBAL_EFLAGS_LAST_ENTRY; else - buf->buffer->element[i].flags = 0; + buf->buffer->element[i].eflags = 0; + buf->buffer->element[i].sflags = 0; } return 0; } @@ -2718,11 +2721,11 @@ int qeth_check_qdio_errors(struct qeth_card *card, struct qdio_buffer *buf, if (qdio_error) { QETH_CARD_TEXT(card, 2, dbftext); QETH_CARD_TEXT_(card, 2, " F15=%02X", - buf->element[15].flags & 0xff); + buf->element[15].sflags); QETH_CARD_TEXT_(card, 2, " F14=%02X", - buf->element[14].flags & 0xff); + buf->element[14].sflags); QETH_CARD_TEXT_(card, 2, " qerr=%X", qdio_error); - if ((buf->element[15].flags & 0xff) == 0x12) { + if ((buf->element[15].sflags) == 0x12) { card->stats.rx_dropped++; return 0; } else @@ -2798,7 +2801,7 @@ EXPORT_SYMBOL_GPL(qeth_queue_input_buffer); static int qeth_handle_send_error(struct qeth_card *card, struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err) { - int sbalf15 = buffer->buffer->element[15].flags & 0xff; + int sbalf15 = buffer->buffer->element[15].sflags; QETH_CARD_TEXT(card, 6, "hdsnderr"); if (card->info.type == QETH_CARD_TYPE_IQD) { @@ -2907,8 +2910,8 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, for (i = index; i < index + count; ++i) { buf = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; - buf->buffer->element[buf->next_element_to_fill - 1].flags |= - SBAL_FLAGS_LAST_ENTRY; + buf->buffer->element[buf->next_element_to_fill - 1].eflags |= + SBAL_EFLAGS_LAST_ENTRY; if (queue->card->info.type == QETH_CARD_TYPE_IQD) continue; @@ -2921,7 +2924,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, /* it's likely that we'll go to packing * mode soon */ atomic_inc(&queue->set_pci_flags_count); - buf->buffer->element[0].flags |= 0x40; + buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ; } } else { if (!atomic_read(&queue->set_pci_flags_count)) { @@ -2934,7 +2937,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, * further send was requested by the stack */ atomic_inc(&queue->set_pci_flags_count); - buf->buffer->element[0].flags |= 0x40; + buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ; } } } @@ -3180,20 +3183,20 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, if (!length) { if (first_lap) if (skb_shinfo(skb)->nr_frags) - buffer->element[element].flags = - SBAL_FLAGS_FIRST_FRAG; + buffer->element[element].eflags = + SBAL_EFLAGS_FIRST_FRAG; else - buffer->element[element].flags = 0; + buffer->element[element].eflags = 0; else - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; + buffer->element[element].eflags = + SBAL_EFLAGS_MIDDLE_FRAG; } else { if (first_lap) - buffer->element[element].flags = - SBAL_FLAGS_FIRST_FRAG; + buffer->element[element].eflags = + SBAL_EFLAGS_FIRST_FRAG; else - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; + buffer->element[element].eflags = + SBAL_EFLAGS_MIDDLE_FRAG; } data += length_here; element++; @@ -3205,12 +3208,12 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, buffer->element[element].addr = (char *)page_to_phys(frag->page) + frag->page_offset; buffer->element[element].length = frag->size; - buffer->element[element].flags = SBAL_FLAGS_MIDDLE_FRAG; + buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG; element++; } - if (buffer->element[element - 1].flags) - buffer->element[element - 1].flags = SBAL_FLAGS_LAST_FRAG; + if (buffer->element[element - 1].eflags) + buffer->element[element - 1].eflags = SBAL_EFLAGS_LAST_FRAG; *next_element_to_fill = element; } @@ -3234,7 +3237,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, /*fill first buffer entry only with header information */ buffer->element[element].addr = skb->data; buffer->element[element].length = hdr_len; - buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG; buf->next_element_to_fill++; skb->data += hdr_len; skb->len -= hdr_len; @@ -3246,7 +3249,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, buffer->element[element].addr = hdr; buffer->element[element].length = sizeof(struct qeth_hdr) + hd_len; - buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG; buf->is_header[element] = 1; buf->next_element_to_fill++; } diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 8512b5c0ef82..022fb6a8cb83 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -640,7 +640,7 @@ static struct fsf_qtcb *zfcp_qtcb_alloc(mempool_t *pool) } static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio, - u32 fsf_cmd, u32 sbtype, + u32 fsf_cmd, u8 sbtype, mempool_t *pool) { struct zfcp_adapter *adapter = qdio->adapter; @@ -841,7 +841,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_cmnd(struct scsi_cmnd *scmnd) if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.scsi_abort); if (IS_ERR(req)) { req = NULL; @@ -1012,7 +1012,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC, - SBAL_FLAGS0_TYPE_WRITE_READ, pool); + SBAL_SFLAGS0_TYPE_WRITE_READ, pool); if (IS_ERR(req)) { ret = PTR_ERR(req); @@ -1110,7 +1110,7 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS, - SBAL_FLAGS0_TYPE_WRITE_READ, NULL); + SBAL_SFLAGS0_TYPE_WRITE_READ, NULL); if (IS_ERR(req)) { ret = PTR_ERR(req); @@ -1156,7 +1156,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1198,7 +1198,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio, goto out_unlock; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, - SBAL_FLAGS0_TYPE_READ, NULL); + SBAL_SFLAGS0_TYPE_READ, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); @@ -1250,7 +1250,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1296,7 +1296,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, goto out_unlock; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, - SBAL_FLAGS0_TYPE_READ, NULL); + SBAL_SFLAGS0_TYPE_READ, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); @@ -1412,7 +1412,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1478,7 +1478,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1553,7 +1553,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1606,7 +1606,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1698,7 +1698,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1812,7 +1812,7 @@ int zfcp_fsf_open_lun(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1901,7 +1901,7 @@ int zfcp_fsf_close_lun(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN, - SBAL_FLAGS0_TYPE_READ, + SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -2161,7 +2161,7 @@ int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *scsi_cmnd) { struct zfcp_fsf_req *req; struct fcp_cmnd *fcp_cmnd; - unsigned int sbtype = SBAL_FLAGS0_TYPE_READ; + u8 sbtype = SBAL_SFLAGS0_TYPE_READ; int real_bytes, retval = -EIO, dix_bytes = 0; struct scsi_device *sdev = scsi_cmnd->device; struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); @@ -2181,7 +2181,7 @@ int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *scsi_cmnd) } if (scsi_cmnd->sc_data_direction == DMA_TO_DEVICE) - sbtype = SBAL_FLAGS0_TYPE_WRITE; + sbtype = SBAL_SFLAGS0_TYPE_WRITE; req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, sbtype, adapter->pool.scsi_req); @@ -2280,7 +2280,7 @@ struct zfcp_fsf_req *zfcp_fsf_fcp_task_mgmt(struct scsi_cmnd *scmnd, goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, - SBAL_FLAGS0_TYPE_WRITE, + SBAL_SFLAGS0_TYPE_WRITE, qdio->adapter->pool.scsi_req); if (IS_ERR(req)) { @@ -2328,17 +2328,18 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, struct zfcp_qdio *qdio = adapter->qdio; struct zfcp_fsf_req *req = NULL; struct fsf_qtcb_bottom_support *bottom; - int direction, retval = -EIO, bytes; + int retval = -EIO, bytes; + u8 direction; if (!(adapter->adapter_features & FSF_FEATURE_CFDC)) return ERR_PTR(-EOPNOTSUPP); switch (fsf_cfdc->command) { case FSF_QTCB_DOWNLOAD_CONTROL_FILE: - direction = SBAL_FLAGS0_TYPE_WRITE; + direction = SBAL_SFLAGS0_TYPE_WRITE; break; case FSF_QTCB_UPLOAD_CONTROL_FILE: - direction = SBAL_FLAGS0_TYPE_READ; + direction = SBAL_SFLAGS0_TYPE_READ; break; default: return ERR_PTR(-EINVAL); @@ -2413,7 +2414,7 @@ void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx) fsf_req->qdio_req.sbal_response = sbal_idx; zfcp_fsf_req_complete(fsf_req); - if (likely(sbale->flags & SBAL_FLAGS_LAST_ENTRY)) + if (likely(sbale->eflags & SBAL_EFLAGS_LAST_ENTRY)) break; } } diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 98e97d90835b..d9c40ea73eef 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -124,7 +124,7 @@ zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) /* set last entry flag in current SBALE of current SBAL */ sbale = zfcp_qdio_sbale_curr(qdio, q_req); - sbale->flags |= SBAL_FLAGS_LAST_ENTRY; + sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY; /* don't exceed last allowed SBAL */ if (q_req->sbal_last == q_req->sbal_limit) @@ -132,7 +132,7 @@ zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) /* set chaining flag in first SBALE of current SBAL */ sbale = zfcp_qdio_sbale_req(qdio, q_req); - sbale->flags |= SBAL_FLAGS0_MORE_SBALS; + sbale->sflags |= SBAL_SFLAGS0_MORE_SBALS; /* calculate index of next SBAL */ q_req->sbal_last++; @@ -147,7 +147,7 @@ zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) /* set storage-block type for new SBAL */ sbale = zfcp_qdio_sbale_curr(qdio, q_req); - sbale->flags |= q_req->sbtype; + sbale->sflags |= q_req->sbtype; return sbale; } @@ -177,7 +177,7 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, /* set storage-block type for this request */ sbale = zfcp_qdio_sbale_req(qdio, q_req); - sbale->flags |= q_req->sbtype; + sbale->sflags |= q_req->sbtype; for (; sg; sg = sg_next(sg)) { sbale = zfcp_qdio_sbale_next(qdio, q_req); @@ -384,7 +384,8 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio) for (cc = 0; cc < QDIO_MAX_BUFFERS_PER_Q; cc++) { sbale = &(qdio->res_q[cc]->element[0]); sbale->length = 0; - sbale->flags = SBAL_FLAGS_LAST_ENTRY; + sbale->eflags = SBAL_EFLAGS_LAST_ENTRY; + sbale->sflags = 0; sbale->addr = NULL; } diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h index 2297d8d3e947..54e22ace012b 100644 --- a/drivers/s390/scsi/zfcp_qdio.h +++ b/drivers/s390/scsi/zfcp_qdio.h @@ -67,7 +67,7 @@ struct zfcp_qdio { * @qdio_outb_usage: usage of outbound queue */ struct zfcp_qdio_req { - u32 sbtype; + u8 sbtype; u8 sbal_number; u8 sbal_first; u8 sbal_last; @@ -116,7 +116,7 @@ zfcp_qdio_sbale_curr(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) */ static inline void zfcp_qdio_req_init(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, - unsigned long req_id, u32 sbtype, void *data, u32 len) + unsigned long req_id, u8 sbtype, void *data, u32 len) { struct qdio_buffer_element *sbale; int count = min(atomic_read(&qdio->req_q_free), @@ -131,7 +131,8 @@ void zfcp_qdio_req_init(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, sbale = zfcp_qdio_sbale_req(qdio, q_req); sbale->addr = (void *) req_id; - sbale->flags = SBAL_FLAGS0_COMMAND | sbtype; + sbale->eflags = 0; + sbale->sflags = SBAL_SFLAGS0_COMMAND | sbtype; if (unlikely(!data)) return; @@ -173,7 +174,7 @@ void zfcp_qdio_set_sbale_last(struct zfcp_qdio *qdio, struct qdio_buffer_element *sbale; sbale = zfcp_qdio_sbale_curr(qdio, q_req); - sbale->flags |= SBAL_FLAGS_LAST_ENTRY; + sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY; } /** diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 4a1f029c4fe9..8d9dae89f065 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -830,6 +830,19 @@ config SCSI_GDTH To compile this driver as a module, choose M here: the module will be called gdth. +config SCSI_ISCI + tristate "Intel(R) C600 Series Chipset SAS Controller" + depends on PCI && SCSI + depends on X86 + # (temporary): known alpha quality driver + depends on EXPERIMENTAL + select SCSI_SAS_LIBSAS + ---help--- + This driver supports the 6Gb/s SAS capabilities of the storage + control unit found in the Intel(R) C600 series chipset. + + The experimental tag will be removed after the driver exits alpha + config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7ad0b8a79ae8..3c08f5352b2d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ +obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index c6c0434d8034..6bba23a26303 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1037,6 +1037,7 @@ static void complete_scsi_command(struct CommandList *cp) unsigned char sense_key; unsigned char asc; /* additional sense code */ unsigned char ascq; /* additional sense code qualifier */ + unsigned long sense_data_size; ei = cp->err_info; cmd = (struct scsi_cmnd *) cp->scsi_cmd; @@ -1051,10 +1052,14 @@ static void complete_scsi_command(struct CommandList *cp) cmd->result |= ei->ScsiStatus; /* copy the sense data whether we need to or not. */ - memcpy(cmd->sense_buffer, ei->SenseInfo, - ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? - SCSI_SENSE_BUFFERSIZE : - ei->SenseLen); + if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo)) + sense_data_size = SCSI_SENSE_BUFFERSIZE; + else + sense_data_size = sizeof(ei->SenseInfo); + if (ei->SenseLen < sense_data_size) + sense_data_size = ei->SenseLen; + + memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size); scsi_set_resid(cmd, ei->ResidualCnt); if (ei->CommandStatus == 0) { @@ -2580,7 +2585,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[0].Ext = 0; /* we are not chaining*/ } hpsa_scsi_do_simple_cmd_core(h, c); - hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + if (iocommand.buf_size > 0) + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); /* Copy the error information out */ diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index b7650613b8c2..bdfa223a7dbb 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4306,8 +4306,8 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost) spin_lock_irqsave(vhost->host->host_lock, flags); if (rc == H_CLOSED) vio_enable_interrupts(to_vio_dev(vhost->dev)); - else if (rc || (rc = ibmvfc_send_crq_init(vhost)) || - (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { + if (rc || (rc = ibmvfc_send_crq_init(vhost)) || + (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD); dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc); } diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile new file mode 100644 index 000000000000..3359e10e0d8f --- /dev/null +++ b/drivers/scsi/isci/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_SCSI_ISCI) += isci.o +isci-objs := init.o phy.o request.o \ + remote_device.o port.o \ + host.o task.o probe_roms.o \ + remote_node_context.o \ + remote_node_table.o \ + unsolicited_frame_control.o \ + port_config.o \ diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile new file mode 100644 index 000000000000..5f54461cabc5 --- /dev/null +++ b/drivers/scsi/isci/firmware/Makefile @@ -0,0 +1,19 @@ +# Makefile for create_fw +# +CC=gcc +CFLAGS=-c -Wall -O2 -g +LDFLAGS= +SOURCES=create_fw.c +OBJECTS=$(SOURCES:.cpp=.o) +EXECUTABLE=create_fw + +all: $(SOURCES) $(EXECUTABLE) + +$(EXECUTABLE): $(OBJECTS) + $(CC) $(LDFLAGS) $(OBJECTS) -o $@ + +.c.o: + $(CC) $(CFLAGS) $< -O $@ + +clean: + rm -f *.o $(EXECUTABLE) diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README new file mode 100644 index 000000000000..8056d2bd233b --- /dev/null +++ b/drivers/scsi/isci/firmware/README @@ -0,0 +1,36 @@ +This defines the temporary binary blow we are to pass to the SCU +driver to emulate the binary firmware that we will eventually be +able to access via NVRAM on the SCU controller. + +The current size of the binary blob is expected to be 149 bytes or larger + +Header Types: +0x1: Phy Masks +0x2: Phy Gens +0x3: SAS Addrs +0xff: End of Data + +ID string - u8[12]: "#SCU MAGIC#\0" +Version - u8: 1 +SubVersion - u8: 0 + +Header Type - u8: 0x1 +Size - u8: 8 +Phy Mask - u32[8] + +Header Type - u8: 0x2 +Size - u8: 8 +Phy Gen - u32[8] + +Header Type - u8: 0x3 +Size - u8: 8 +Sas Addr - u64[8] + +Header Type - u8: 0xf + + +============================================================================== + +Place isci_firmware.bin in /lib/firmware +Be sure to recreate the initramfs image to include the firmware. + diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c new file mode 100644 index 000000000000..c7a2887a7e95 --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.c @@ -0,0 +1,99 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <string.h> +#include <errno.h> +#include <asm/types.h> +#include <strings.h> +#include <stdint.h> + +#include "create_fw.h" +#include "../probe_roms.h" + +int write_blob(struct isci_orom *isci_orom) +{ + FILE *fd; + int err; + size_t count; + + fd = fopen(blob_name, "w+"); + if (!fd) { + perror("Open file for write failed"); + fclose(fd); + return -EIO; + } + + count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd); + if (count != 1) { + perror("Write data failed"); + fclose(fd); + return -EIO; + } + + fclose(fd); + + return 0; +} + +void set_binary_values(struct isci_orom *isci_orom) +{ + int ctrl_idx, phy_idx, port_idx; + + /* setting OROM signature */ + strncpy(isci_orom->hdr.signature, sig, strlen(sig)); + isci_orom->hdr.version = version; + isci_orom->hdr.total_block_length = sizeof(struct isci_orom); + isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); + isci_orom->hdr.num_elements = num_elements; + + for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) { + isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type; + isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up = + max_num_concurrent_dev_spin_up; + isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc = + enable_ssc; + + for (port_idx = 0; port_idx < 4; port_idx++) + isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask = + phy_mask[ctrl_idx][port_idx]; + + for (phy_idx = 0; phy_idx < 4; phy_idx++) { + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high = + (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = + (__u32)(sas_addr[ctrl_idx][phy_idx]); + + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 = + afe_tx_amp_control0; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 = + afe_tx_amp_control1; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 = + afe_tx_amp_control2; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 = + afe_tx_amp_control3; + } + } +} + +int main(void) +{ + int err; + struct isci_orom *isci_orom; + + isci_orom = malloc(sizeof(struct isci_orom)); + memset(isci_orom, 0, sizeof(struct isci_orom)); + + set_binary_values(isci_orom); + + err = write_blob(isci_orom); + if (err < 0) { + free(isci_orom); + return err; + } + + free(isci_orom); + return 0; +} diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h new file mode 100644 index 000000000000..5f298828d22e --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -0,0 +1,77 @@ +#ifndef _CREATE_FW_H_ +#define _CREATE_FW_H_ +#include "../probe_roms.h" + + +/* we are configuring for 2 SCUs */ +static const int num_elements = 2; + +/* + * For all defined arrays: + * elements 0-3 are for SCU0, ports 0-3 + * elements 4-7 are for SCU1, ports 0-3 + * + * valid configurations for one SCU are: + * P0 P1 P2 P3 + * ---------------- + * 0xF,0x0,0x0,0x0 # 1 x4 port + * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 + * # ports + * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 + * # port + * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port + * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) + * + * if there is a port/phy on which you do not wish to override the default + * values, use the value assigned to UNINIT_PARAM (255). + */ + +/* discovery mode type (port auto config mode by default ) */ + +/* + * if there is a port/phy on which you do not wish to override the default + * values, use the value "0000000000000000". SAS address of zero's is + * considered invalid and will not be used. + */ +#ifdef MPC +static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; +static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, + {1, 2, 4, 8} }; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, + 0x5FCFFFFFF0000002ULL, + 0x5FCFFFFFF0000003ULL, + 0x5FCFFFFFF0000004ULL }, + { 0x5FCFFFFFF0000005ULL, + 0x5FCFFFFFF0000006ULL, + 0x5FCFFFFFF0000007ULL, + 0x5FCFFFFFF0000008ULL } }; +#else /* APC (default) */ +static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; +static const __u8 phy_mask[2][4]; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL }, + { 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL } }; +#endif + +/* Maximum number of concurrent device spin up */ +static const int max_num_concurrent_dev_spin_up = 1; + +/* enable of ssc operation */ +static const int enable_ssc; + +/* AFE_TX_AMP_CONTROL */ +static const unsigned int afe_tx_amp_control0 = 0x000bdd08; +static const unsigned int afe_tx_amp_control1 = 0x000ffc00; +static const unsigned int afe_tx_amp_control2 = 0x000b7c09; +static const unsigned int afe_tx_amp_control3 = 0x000afc6e; + +static const char blob_name[] = "isci_firmware.bin"; +static const char sig[] = "ISCUOEMB"; +static const unsigned char version = 0x10; + +#endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c new file mode 100644 index 000000000000..26072f1e9852 --- /dev/null +++ b/drivers/scsi/isci/host.c @@ -0,0 +1,2751 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <linux/circ_buf.h> +#include <linux/device.h> +#include <scsi/sas.h> +#include "host.h" +#include "isci.h" +#include "port.h" +#include "host.h" +#include "probe_roms.h" +#include "remote_device.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "registers.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" + +#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 + +#define smu_max_ports(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ + ) + +#define smu_max_task_contexts(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ + ) + +#define smu_max_rncs(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ + ) + +#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 + +/** + * + * + * The number of milliseconds to wait while a given phy is consuming power + * before allowing another set of phys to consume power. Ultimately, this will + * be specified by OEM parameter. + */ +#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 + +/** + * NORMALIZE_PUT_POINTER() - + * + * This macro will normalize the completion queue put pointer so its value can + * be used as an array inde + */ +#define NORMALIZE_PUT_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) + + +/** + * NORMALIZE_EVENT_POINTER() - + * + * This macro will normalize the completion queue event entry so its value can + * be used as an index. + */ +#define NORMALIZE_EVENT_POINTER(x) \ + (\ + ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ + >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ + ) + +/** + * NORMALIZE_GET_POINTER() - + * + * This macro will normalize the completion queue get pointer so its value can + * be used as an index into an array + */ +#define NORMALIZE_GET_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) + +/** + * NORMALIZE_GET_POINTER_CYCLE_BIT() - + * + * This macro will normalize the completion queue cycle pointer so it matches + * the completion queue cycle bit + */ +#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ + ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) + +/** + * COMPLETION_QUEUE_CYCLE_BIT() - + * + * This macro will return the cycle bit of the completion queue entry + */ +#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) + +/* Init the state machine and call the state entry function (if any) */ +void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, u32 initial_state) +{ + sci_state_transition_t handler; + + sm->initial_state_id = initial_state; + sm->previous_state_id = initial_state; + sm->current_state_id = initial_state; + sm->state_table = state_table; + + handler = sm->state_table[initial_state].enter_state; + if (handler) + handler(sm); +} + +/* Call the state exit fn, update the current state, call the state entry fn */ +void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) +{ + sci_state_transition_t handler; + + handler = sm->state_table[sm->current_state_id].exit_state; + if (handler) + handler(sm); + + sm->previous_state_id = sm->current_state_id; + sm->current_state_id = next_state; + + handler = sm->state_table[sm->current_state_id].enter_state; + if (handler) + handler(sm); +} + +static bool sci_controller_completion_queue_has_entries(struct isci_host *ihost) +{ + u32 get_value = ihost->completion_queue_get; + u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; + + if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == + COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index])) + return true; + + return false; +} + +static bool sci_controller_isr(struct isci_host *ihost) +{ + if (sci_controller_completion_queue_has_entries(ihost)) { + return true; + } else { + /* + * we have a spurious interrupt it could be that we have already + * emptied the completion queue from a previous interrupt */ + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the interrupts so if there is another interrupt pending + * the clearing of the interrupt source we get the next interrupt message. */ + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); + } + + return false; +} + +irqreturn_t isci_msix_isr(int vec, void *data) +{ + struct isci_host *ihost = data; + + if (sci_controller_isr(ihost)) + tasklet_schedule(&ihost->completion_tasklet); + + return IRQ_HANDLED; +} + +static bool sci_controller_error_isr(struct isci_host *ihost) +{ + u32 interrupt_status; + + interrupt_status = + readl(&ihost->smu_registers->interrupt_status); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the error interrupts so if there was another interrupt + * pending we will be notified. + * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ + writel(0xff, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); + + return false; +} + +static void sci_controller_task_completion(struct isci_host *ihost, u32 ent) +{ + u32 index = SCU_GET_COMPLETION_INDEX(ent); + struct isci_request *ireq = ihost->reqs[index]; + + /* Make sure that we really want to process this IO request */ + if (test_bit(IREQ_ACTIVE, &ireq->flags) && + ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && + ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index]) + /* Yep this is a valid io request pass it along to the + * io request handler + */ + sci_io_request_tc_completion(ireq, ent); +} + +static void sci_controller_sdma_completion(struct isci_host *ihost, u32 ent) +{ + u32 index; + struct isci_request *ireq; + struct isci_remote_device *idev; + + index = SCU_GET_COMPLETION_INDEX(ent); + + switch (scu_get_command_request_type(ent)) { + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: + ireq = ihost->reqs[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n", + __func__, ent, ireq); + /* @todo For a post TC operation we need to fail the IO + * request + */ + break; + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: + idev = ihost->device_table[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n", + __func__, ent, idev); + /* @todo For a port RNC operation we need to fail the + * device + */ + break; + default: + dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n", + __func__, ent); + break; + } +} + +static void sci_controller_unsolicited_frame(struct isci_host *ihost, u32 ent) +{ + u32 index; + u32 frame_index; + + struct scu_unsolicited_frame_header *frame_header; + struct isci_phy *iphy; + struct isci_remote_device *idev; + + enum sci_status result = SCI_FAILURE; + + frame_index = SCU_GET_FRAME_INDEX(ent); + + frame_header = ihost->uf_control.buffers.array[frame_index].header; + ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; + + if (SCU_GET_FRAME_ERROR(ent)) { + /* + * / @todo If the IAF frame or SIGNATURE FIS frame has an error will + * / this cause a problem? We expect the phy initialization will + * / fail if there is an error in the frame. */ + sci_controller_release_frame(ihost, frame_index); + return; + } + + if (frame_header->is_address_frame) { + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + result = sci_phy_frame_handler(iphy, frame_index); + } else { + + index = SCU_GET_COMPLETION_INDEX(ent); + + if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + /* + * This is a signature fis or a frame from a direct attached SATA + * device that has not yet been created. In either case forwared + * the frame to the PE and let it take care of the frame data. */ + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + result = sci_phy_frame_handler(iphy, frame_index); + } else { + if (index < ihost->remote_node_entries) + idev = ihost->device_table[index]; + else + idev = NULL; + + if (idev != NULL) + result = sci_remote_device_frame_handler(idev, frame_index); + else + sci_controller_release_frame(ihost, frame_index); + } + } + + if (result != SCI_SUCCESS) { + /* + * / @todo Is there any reason to report some additional error message + * / when we get this failure notifiction? */ + } +} + +static void sci_controller_event_completion(struct isci_host *ihost, u32 ent) +{ + struct isci_remote_device *idev; + struct isci_request *ireq; + struct isci_phy *iphy; + u32 index; + + index = SCU_GET_COMPLETION_INDEX(ent); + + switch (scu_get_event_type(ent)) { + case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: + /* / @todo The driver did something wrong and we need to fix the condtion. */ + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received SMU command error " + "0x%x\n", + __func__, + ihost, + ent); + break; + + case SCU_EVENT_TYPE_SMU_PCQ_ERROR: + case SCU_EVENT_TYPE_SMU_ERROR: + case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: + /* + * / @todo This is a hardware failure and its likely that we want to + * / reset the controller. */ + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received fatal controller " + "event 0x%x\n", + __func__, + ihost, + ent); + break; + + case SCU_EVENT_TYPE_TRANSPORT_ERROR: + ireq = ihost->reqs[index]; + sci_io_request_event_handler(ireq, ent); + break; + + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + switch (scu_get_event_specifier(ent)) { + case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: + case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: + ireq = ihost->reqs[index]; + if (ireq != NULL) + sci_io_request_event_handler(ireq, ent); + else + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received " + "event 0x%x for io request object " + "that doesnt exist.\n", + __func__, + ihost, + ent); + + break; + + case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: + idev = ihost->device_table[index]; + if (idev != NULL) + sci_remote_device_event_handler(idev, ent); + else + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received " + "event 0x%x for remote device object " + "that doesnt exist.\n", + __func__, + ihost, + ent); + + break; + } + break; + + case SCU_EVENT_TYPE_BROADCAST_CHANGE: + /* + * direct the broadcast change event to the phy first and then let + * the phy redirect the broadcast change to the port object */ + case SCU_EVENT_TYPE_ERR_CNT_EVENT: + /* + * direct error counter event to the phy object since that is where + * we get the event notification. This is a type 4 event. */ + case SCU_EVENT_TYPE_OSSP_EVENT: + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + sci_phy_event_handler(iphy, ent); + break; + + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + case SCU_EVENT_TYPE_RNC_OPS_MISC: + if (index < ihost->remote_node_entries) { + idev = ihost->device_table[index]; + + if (idev != NULL) + sci_remote_device_event_handler(idev, ent); + } else + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received event 0x%x " + "for remote device object 0x%0x that doesnt " + "exist.\n", + __func__, + ihost, + ent, + index); + + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller received unknown event code %x\n", + __func__, + ent); + break; + } +} + +static void sci_controller_process_completions(struct isci_host *ihost) +{ + u32 completion_count = 0; + u32 ent; + u32 get_index; + u32 get_cycle; + u32 event_get; + u32 event_cycle; + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue begining get:0x%08x\n", + __func__, + ihost->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(ihost->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & ihost->completion_queue_get; + + event_get = NORMALIZE_EVENT_POINTER(ihost->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & ihost->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index]) + ) { + completion_count++; + + ent = ihost->completion_queue[get_index]; + + /* increment the get pointer and check for rollover to toggle the cycle bit */ + get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) << + (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT); + get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1); + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue entry:0x%08x\n", + __func__, + ent); + + switch (SCU_GET_COMPLETION_TYPE(ent)) { + case SCU_COMPLETION_TYPE_TASK: + sci_controller_task_completion(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_SDMA: + sci_controller_sdma_completion(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_UFI: + sci_controller_unsolicited_frame(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_EVENT: + case SCU_COMPLETION_TYPE_NOTIFY: { + event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << + (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); + event_get = (event_get+1) & (SCU_MAX_EVENTS-1); + + sci_controller_event_completion(ihost, ent); + break; + } + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller received unknown " + "completion type %x\n", + __func__, + ent); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + ihost->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) | + SMU_CQGR_GEN_BIT(EVENT_ENABLE) | + event_cycle | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_get) | + get_cycle | + SMU_CQGR_GEN_VAL(POINTER, get_index); + + writel(ihost->completion_queue_get, + &ihost->smu_registers->completion_queue_get); + + } + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue ending get:0x%08x\n", + __func__, + ihost->completion_queue_get); + +} + +static void sci_controller_error_handler(struct isci_host *ihost) +{ + u32 interrupt_status; + + interrupt_status = + readl(&ihost->smu_registers->interrupt_status); + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + sci_controller_completion_queue_has_entries(ihost)) { + + sci_controller_process_completions(ihost); + writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status); + } else { + dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__, + interrupt_status); + + sci_change_state(&ihost->sm, SCIC_FAILED); + + return; + } + + /* If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. + */ + writel(0, &ihost->smu_registers->interrupt_mask); +} + +irqreturn_t isci_intx_isr(int vec, void *data) +{ + irqreturn_t ret = IRQ_NONE; + struct isci_host *ihost = data; + + if (sci_controller_isr(ihost)) { + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + tasklet_schedule(&ihost->completion_tasklet); + ret = IRQ_HANDLED; + } else if (sci_controller_error_isr(ihost)) { + spin_lock(&ihost->scic_lock); + sci_controller_error_handler(ihost); + spin_unlock(&ihost->scic_lock); + ret = IRQ_HANDLED; + } + + return ret; +} + +irqreturn_t isci_error_isr(int vec, void *data) +{ + struct isci_host *ihost = data; + + if (sci_controller_error_isr(ihost)) + sci_controller_error_handler(ihost); + + return IRQ_HANDLED; +} + +/** + * isci_host_start_complete() - This function is called by the core library, + * through the ISCI Module, to indicate controller start status. + * @isci_host: This parameter specifies the ISCI host object + * @completion_status: This parameter specifies the completion status from the + * core library. + * + */ +static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) +{ + if (completion_status != SCI_SUCCESS) + dev_info(&ihost->pdev->dev, + "controller start timed out, continuing...\n"); + isci_host_change_state(ihost, isci_ready); + clear_bit(IHOST_START_PENDING, &ihost->flags); + wake_up(&ihost->eventq); +} + +int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; + + if (test_bit(IHOST_START_PENDING, &ihost->flags)) + return 0; + + /* todo: use sas_flush_discovery once it is upstream */ + scsi_flush_work(shost); + + scsi_flush_work(shost); + + dev_dbg(&ihost->pdev->dev, + "%s: ihost->status = %d, time = %ld\n", + __func__, isci_host_get_state(ihost), time); + + return 1; + +} + +/** + * sci_controller_get_suggested_start_timeout() - This method returns the + * suggested sci_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ +static u32 sci_controller_get_suggested_start_timeout(struct isci_host *ihost) +{ + /* Validate the user supplied parameters. */ + if (!ihost) + return 0; + + /* + * The suggested minimum timeout value for a controller start operation: + * + * Signature FIS Timeout + * + Phy Start Timeout + * + Number of Phy Spin Up Intervals + * --------------------------------- + * Number of milliseconds for the controller start operation. + * + * NOTE: The number of phy spin up intervals will be equivalent + * to the number of phys divided by the number phys allowed + * per interval - 1 (once OEM parameters are supported). + * Currently we assume only 1 phy per interval. */ + + return SCIC_SDS_SIGNATURE_FIS_TIMEOUT + + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); +} + +static void sci_controller_enable_interrupts(struct isci_host *ihost) +{ + BUG_ON(ihost->smu_registers == NULL); + writel(0, &ihost->smu_registers->interrupt_mask); +} + +void sci_controller_disable_interrupts(struct isci_host *ihost) +{ + BUG_ON(ihost->smu_registers == NULL); + writel(0xffffffff, &ihost->smu_registers->interrupt_mask); +} + +static void sci_controller_enable_port_task_scheduler(struct isci_host *ihost) +{ + u32 port_task_scheduler_value; + + port_task_scheduler_value = + readl(&ihost->scu_registers->peg0.ptsg.control); + port_task_scheduler_value |= + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | + SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + writel(port_task_scheduler_value, + &ihost->scu_registers->peg0.ptsg.control); +} + +static void sci_controller_assign_task_entries(struct isci_host *ihost) +{ + u32 task_assignment; + + /* + * Assign all the TCs to function 0 + * TODO: Do we actually need to read this register to write it back? + */ + + task_assignment = + readl(&ihost->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, ihost->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &ihost->smu_registers->task_context_assignment[0]); + +} + +static void sci_controller_initialize_completion_queue(struct isci_host *ihost) +{ + u32 index; + u32 completion_queue_control_value; + u32 completion_queue_get_value; + u32 completion_queue_put_value; + + ihost->completion_queue_get = 0; + + completion_queue_control_value = + (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) | + SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1)); + + writel(completion_queue_control_value, + &ihost->smu_registers->completion_queue_control); + + + /* Set the completion queue get pointer and enable the queue */ + completion_queue_get_value = ( + (SMU_CQGR_GEN_VAL(POINTER, 0)) + | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) + | (SMU_CQGR_GEN_BIT(ENABLE)) + | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) + ); + + writel(completion_queue_get_value, + &ihost->smu_registers->completion_queue_get); + + /* Set the completion queue put pointer */ + completion_queue_put_value = ( + (SMU_CQPR_GEN_VAL(POINTER, 0)) + | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) + ); + + writel(completion_queue_put_value, + &ihost->smu_registers->completion_queue_put); + + /* Initialize the cycle bit of the completion queue entries */ + for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) { + /* + * If get.cycle_bit != completion_queue.cycle_bit + * its not a valid completion queue entry + * so at system start all entries are invalid */ + ihost->completion_queue[index] = 0x80000000; + } +} + +static void sci_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost) +{ + u32 frame_queue_control_value; + u32 frame_queue_get_value; + u32 frame_queue_put_value; + + /* Write the queue size */ + frame_queue_control_value = + SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES); + + writel(frame_queue_control_value, + &ihost->scu_registers->sdma.unsolicited_frame_queue_control); + + /* Setup the get pointer for the unsolicited frame queue */ + frame_queue_get_value = ( + SCU_UFQGP_GEN_VAL(POINTER, 0) + | SCU_UFQGP_GEN_BIT(ENABLE_BIT) + ); + + writel(frame_queue_get_value, + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); + /* Setup the put pointer for the unsolicited frame queue */ + frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); + writel(frame_queue_put_value, + &ihost->scu_registers->sdma.unsolicited_frame_put_pointer); +} + +static void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status) +{ + if (ihost->sm.current_state_id == SCIC_STARTING) { + /* + * We move into the ready state, because some of the phys/ports + * may be up and operational. + */ + sci_change_state(&ihost->sm, SCIC_READY); + + isci_host_start_complete(ihost, status); + } +} + +static bool is_phy_starting(struct isci_phy *iphy) +{ + enum sci_phy_states state; + + state = iphy->sm.current_state_id; + switch (state) { + case SCI_PHY_STARTING: + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_IAF_UF: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: + return true; + default: + return false; + } +} + +/** + * sci_controller_start_next_phy - start phy + * @scic: controller + * + * If all the phys have been started, then attempt to transition the + * controller to the READY state and inform the user + * (sci_cb_controller_start_complete()). + */ +static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost) +{ + struct sci_oem_params *oem = &ihost->oem_parameters; + struct isci_phy *iphy; + enum sci_status status; + + status = SCI_SUCCESS; + + if (ihost->phy_startup_timer_pending) + return status; + + if (ihost->next_phy_to_start >= SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + u32 state; + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + iphy = &ihost->phys[index]; + state = iphy->sm.current_state_id; + + if (!phy_get_non_dummy_port(iphy)) + continue; + + /* The controller start operation is complete iff: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) || + (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) || + (iphy->is_in_link_training == true && is_phy_starting(iphy))) { + is_controller_start_complete = false; + break; + } + } + + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + sci_controller_transition_to_ready(ihost, SCI_SUCCESS); + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; + } + } else { + iphy = &ihost->phys[ihost->next_phy_to_start]; + + if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + if (phy_get_non_dummy_port(iphy) == NULL) { + ihost->next_phy_to_start++; + + /* Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode + * so start the next phy in sequence This phy + * will never go link up and will not draw power + * the OEM parameters either configured the phy + * incorrectly for the PORT or it was never + * assigned to a PORT + */ + return sci_controller_start_next_phy(ihost); + } + } + + status = sci_phy_start(iphy); + + if (status == SCI_SUCCESS) { + sci_mod_timer(&ihost->phy_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); + ihost->phy_startup_timer_pending = true; + } else { + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + ihost->phys[ihost->next_phy_to_start].phy_index, + status); + } + + ihost->next_phy_to_start++; + } + + return status; +} + +static void phy_startup_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), phy_timer); + unsigned long flags; + enum sci_status status; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + ihost->phy_startup_timer_pending = false; + + do { + status = sci_controller_start_next_phy(ihost); + } while (status != SCI_SUCCESS); + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static u16 isci_tci_active(struct isci_host *ihost) +{ + return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +static enum sci_status sci_controller_start(struct isci_host *ihost, + u32 timeout) +{ + enum sci_status result; + u16 index; + + if (ihost->sm.current_state_id != SCIC_INITIALIZED) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller start operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + /* Build the TCi free pool */ + BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8); + ihost->tci_head = 0; + ihost->tci_tail = 0; + for (index = 0; index < ihost->task_context_entries; index++) + isci_tci_free(ihost, index); + + /* Build the RNi free pool */ + sci_remote_node_table_initialize(&ihost->available_remote_nodes, + ihost->remote_node_entries); + + /* + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + sci_controller_disable_interrupts(ihost); + + /* Enable the port task scheduler */ + sci_controller_enable_port_task_scheduler(ihost); + + /* Assign all the task entries to ihost physical function */ + sci_controller_assign_task_entries(ihost); + + /* Now initialize the completion queue */ + sci_controller_initialize_completion_queue(ihost); + + /* Initialize the unsolicited frame queue for use */ + sci_controller_initialize_unsolicited_frame_queue(ihost); + + /* Start all of the ports on this controller */ + for (index = 0; index < ihost->logical_port_entries; index++) { + struct isci_port *iport = &ihost->ports[index]; + + result = sci_port_start(iport); + if (result) + return result; + } + + sci_controller_start_next_phy(ihost); + + sci_mod_timer(&ihost->timer, timeout); + + sci_change_state(&ihost->sm, SCIC_STARTING); + + return SCI_SUCCESS; +} + +void isci_host_scan_start(struct Scsi_Host *shost) +{ + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; + unsigned long tmo = sci_controller_get_suggested_start_timeout(ihost); + + set_bit(IHOST_START_PENDING, &ihost->flags); + + spin_lock_irq(&ihost->scic_lock); + sci_controller_start(ihost, tmo); + sci_controller_enable_interrupts(ihost); + spin_unlock_irq(&ihost->scic_lock); +} + +static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) +{ + isci_host_change_state(ihost, isci_stopped); + sci_controller_disable_interrupts(ihost); + clear_bit(IHOST_STOP_PENDING, &ihost->flags); + wake_up(&ihost->eventq); +} + +static void sci_controller_completion_handler(struct isci_host *ihost) +{ + /* Empty out the completion queue */ + if (sci_controller_completion_queue_has_entries(ihost)) + sci_controller_process_completions(ihost); + + /* Clear the interrupt and enable all interrupts again */ + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + /* Could we write the value of SMU_ISR_COMPLETION? */ + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); +} + +/** + * isci_host_completion_routine() - This function is the delayed service + * routine that calls the sci core library's completion handler. It's + * scheduled as a tasklet from the interrupt service routine when interrupts + * in use, or set as the timeout function in polled mode. + * @data: This parameter specifies the ISCI host object + * + */ +static void isci_host_completion_routine(unsigned long data) +{ + struct isci_host *ihost = (struct isci_host *)data; + struct list_head completed_request_list; + struct list_head errored_request_list; + struct list_head *current_position; + struct list_head *next_position; + struct isci_request *request; + struct isci_request *next_request; + struct sas_task *task; + + INIT_LIST_HEAD(&completed_request_list); + INIT_LIST_HEAD(&errored_request_list); + + spin_lock_irq(&ihost->scic_lock); + + sci_controller_completion_handler(ihost); + + /* Take the lists of completed I/Os from the host. */ + + list_splice_init(&ihost->requests_to_complete, + &completed_request_list); + + /* Take the list of errored I/Os from the host. */ + list_splice_init(&ihost->requests_to_errorback, + &errored_request_list); + + spin_unlock_irq(&ihost->scic_lock); + + /* Process any completions in the lists. */ + list_for_each_safe(current_position, next_position, + &completed_request_list) { + + request = list_entry(current_position, struct isci_request, + completed_node); + task = isci_request_access_task(request); + + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - request/task = %p/%p\n", + __func__, + request, + task); + + /* Return the task to libsas */ + if (task != NULL) { + + task->lldd_task = NULL; + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + /* If the task is already in the abort path, + * the task_done callback cannot be called. + */ + task->task_done(task); + } + } + + spin_lock_irq(&ihost->scic_lock); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); + } + list_for_each_entry_safe(request, next_request, &errored_request_list, + completed_node) { + + task = isci_request_access_task(request); + + /* Use sas_task_abort */ + dev_warn(&ihost->pdev->dev, + "%s: Error - request/task = %p/%p\n", + __func__, + request, + task); + + if (task != NULL) { + + /* Put the task into the abort path if it's not there + * already. + */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) + sas_task_abort(task); + + } else { + /* This is a case where the request has completed with a + * status such that it needed further target servicing, + * but the sas_task reference has already been removed + * from the request. Since it was errored, it was not + * being aborted, so there is nothing to do except free + * it. + */ + + spin_lock_irq(&ihost->scic_lock); + /* Remove the request from the remote device's list + * of pending requests. + */ + list_del_init(&request->dev_node); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); + } + } + +} + +/** + * sci_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ +static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout) +{ + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller stop operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_mod_timer(&ihost->timer, timeout); + sci_change_state(&ihost->sm, SCIC_STOPPING); + return SCI_SUCCESS; +} + +/** + * sci_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ +static enum sci_status sci_controller_reset(struct isci_host *ihost) +{ + switch (ihost->sm.current_state_id) { + case SCIC_RESET: + case SCIC_READY: + case SCIC_STOPPED: + case SCIC_FAILED: + /* + * The reset operation is not a graceful cleanup, just + * perform the state transition. + */ + sci_change_state(&ihost->sm, SCIC_RESETTING); + return SCI_SUCCESS; + default: + dev_warn(&ihost->pdev->dev, + "SCIC Controller reset operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } +} + +void isci_host_deinit(struct isci_host *ihost) +{ + int i; + + isci_host_change_state(ihost, isci_stopping); + for (i = 0; i < SCI_MAX_PORTS; i++) { + struct isci_port *iport = &ihost->ports[i]; + struct isci_remote_device *idev, *d; + + list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) { + if (test_bit(IDEV_ALLOCATED, &idev->flags)) + isci_remote_device_stop(ihost, idev); + } + } + + set_bit(IHOST_STOP_PENDING, &ihost->flags); + + spin_lock_irq(&ihost->scic_lock); + sci_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT); + spin_unlock_irq(&ihost->scic_lock); + + wait_for_stop(ihost); + sci_controller_reset(ihost); + + /* Cancel any/all outstanding port timers */ + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + del_timer_sync(&iport->timer.timer); + } + + /* Cancel any/all outstanding phy timers */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct isci_phy *iphy = &ihost->phys[i]; + del_timer_sync(&iphy->sata_timer.timer); + } + + del_timer_sync(&ihost->port_agent.timer.timer); + + del_timer_sync(&ihost->power_control.timer.timer); + + del_timer_sync(&ihost->timer.timer); + + del_timer_sync(&ihost->phy_timer.timer); +} + +static void __iomem *scu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id; +} + +static void __iomem *smu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; +} + +static void isci_user_parameters_get(struct sci_user_parameters *u) +{ + int i; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct sci_phy_user_params *u_phy = &u->phys[i]; + + u_phy->max_speed_generation = phy_gen; + + /* we are not exporting these for now */ + u_phy->align_insertion_frequency = 0x7f; + u_phy->in_connection_align_insertion_frequency = 0xff; + u_phy->notify_enable_spin_up_insertion_frequency = 0x33; + } + + u->stp_inactivity_timeout = stp_inactive_to; + u->ssp_inactivity_timeout = ssp_inactive_to; + u->stp_max_occupancy_timeout = stp_max_occ_to; + u->ssp_max_occupancy_timeout = ssp_max_occ_to; + u->no_outbound_task_timeout = no_outbound_task_to; + u->max_number_concurrent_device_spin_up = max_concurr_spinup; +} + +static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_change_state(&ihost->sm, SCIC_RESET); +} + +static inline void sci_controller_starting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_del_timer(&ihost->timer); +} + +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 +#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 +#define INTERRUPT_COALESCE_NUMBER_MAX 256 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 + +/** + * sci_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +static enum sci_status +sci_controller_set_interrupt_coalescence(struct isci_host *ihost, + u32 coalesce_number, + u32 coalesce_timeout) +{ + u8 timeout_encode = 0; + u32 min = 0; + u32 max = 0; + + /* Check if the input parameters fall in the range. */ + if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + /* + * Defined encoding for interrupt coalescing timeout: + * Value Min Max Units + * ----- --- --- ----- + * 0 - - Disabled + * 1 13.3 20.0 ns + * 2 26.7 40.0 + * 3 53.3 80.0 + * 4 106.7 160.0 + * 5 213.3 320.0 + * 6 426.7 640.0 + * 7 853.3 1280.0 + * 8 1.7 2.6 us + * 9 3.4 5.1 + * 10 6.8 10.2 + * 11 13.7 20.5 + * 12 27.3 41.0 + * 13 54.6 81.9 + * 14 109.2 163.8 + * 15 218.5 327.7 + * 16 436.9 655.4 + * 17 873.8 1310.7 + * 18 1.7 2.6 ms + * 19 3.5 5.2 + * 20 7.0 10.5 + * 21 14.0 21.0 + * 22 28.0 41.9 + * 23 55.9 83.9 + * 24 111.8 167.8 + * 25 223.7 335.5 + * 26 447.4 671.1 + * 27 894.8 1342.2 + * 28 1.8 2.7 s + * Others Undefined */ + + /* + * Use the table above to decide the encode of interrupt coalescing timeout + * value for register writing. */ + if (coalesce_timeout == 0) + timeout_encode = 0; + else{ + /* make the timeout value in unit of (10 ns). */ + coalesce_timeout = coalesce_timeout * 100; + min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; + max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; + + /* get the encode of timeout for register writing. */ + for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; + timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; + timeout_encode++) { + if (min <= coalesce_timeout && max > coalesce_timeout) + break; + else if (coalesce_timeout >= max && coalesce_timeout < min * 2 + && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { + if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) + break; + else{ + timeout_encode++; + break; + } + } else { + max = max * 2; + min = min * 2; + } + } + + if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) + /* the value is out of range. */ + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &ihost->smu_registers->interrupt_coalesce_control); + + + ihost->interrupt_coalesce_number = (u16)coalesce_number; + ihost->interrupt_coalesce_timeout = coalesce_timeout / 100; + + return SCI_SUCCESS; +} + + +static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* set the default interrupt coalescence number and timeout value. */ + sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); +} + +static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* disable interrupt coalescence. */ + sci_controller_set_interrupt_coalescence(ihost, 0, 0); +} + +static enum sci_status sci_controller_stop_phys(struct isci_host *ihost) +{ + u32 index; + enum sci_status status; + enum sci_status phy_status; + + status = SCI_SUCCESS; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy_status = sci_phy_stop(&ihost->phys[index]); + + if (phy_status != SCI_SUCCESS && + phy_status != SCI_FAILURE_INVALID_STATE) { + status = SCI_FAILURE; + + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed to stop " + "phy %d because of status %d.\n", + __func__, + ihost->phys[index].phy_index, phy_status); + } + } + + return status; +} + +static enum sci_status sci_controller_stop_ports(struct isci_host *ihost) +{ + u32 index; + enum sci_status port_status; + enum sci_status status = SCI_SUCCESS; + + for (index = 0; index < ihost->logical_port_entries; index++) { + struct isci_port *iport = &ihost->ports[index]; + + port_status = sci_port_stop(iport); + + if ((port_status != SCI_SUCCESS) && + (port_status != SCI_FAILURE_INVALID_STATE)) { + status = SCI_FAILURE; + + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed to " + "stop port %d because of status %d.\n", + __func__, + iport->logical_port_index, + port_status); + } + } + + return status; +} + +static enum sci_status sci_controller_stop_devices(struct isci_host *ihost) +{ + u32 index; + enum sci_status status; + enum sci_status device_status; + + status = SCI_SUCCESS; + + for (index = 0; index < ihost->remote_node_entries; index++) { + if (ihost->device_table[index] != NULL) { + /* / @todo What timeout value do we want to provide to this request? */ + device_status = sci_remote_device_stop(ihost->device_table[index], 0); + + if ((device_status != SCI_SUCCESS) && + (device_status != SCI_FAILURE_INVALID_STATE)) { + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed " + "to stop device 0x%p because of " + "status %d.\n", + __func__, + ihost->device_table[index], device_status); + } + } + } + + return status; +} + +static void sci_controller_stopping_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* Stop all of the components for this controller */ + sci_controller_stop_phys(ihost); + sci_controller_stop_ports(ihost); + sci_controller_stop_devices(ihost); +} + +static void sci_controller_stopping_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_del_timer(&ihost->timer); +} + +static void sci_controller_reset_hardware(struct isci_host *ihost) +{ + /* Disable interrupts so we dont take any spurious interrupts */ + sci_controller_disable_interrupts(ihost); + + /* Reset the SCU */ + writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control); + + /* Delay for 1ms to before clearing the CQP and UFQPR. */ + udelay(1000); + + /* The write to the CQGR clears the CQP */ + writel(0x00000000, &ihost->smu_registers->completion_queue_get); + + /* The write to the UFQGP clears the UFQPR */ + writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +static void sci_controller_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_controller_reset_hardware(ihost); + sci_change_state(&ihost->sm, SCIC_RESET); +} + +static const struct sci_base_state sci_controller_state_table[] = { + [SCIC_INITIAL] = { + .enter_state = sci_controller_initial_state_enter, + }, + [SCIC_RESET] = {}, + [SCIC_INITIALIZING] = {}, + [SCIC_INITIALIZED] = {}, + [SCIC_STARTING] = { + .exit_state = sci_controller_starting_state_exit, + }, + [SCIC_READY] = { + .enter_state = sci_controller_ready_state_enter, + .exit_state = sci_controller_ready_state_exit, + }, + [SCIC_RESETTING] = { + .enter_state = sci_controller_resetting_state_enter, + }, + [SCIC_STOPPING] = { + .enter_state = sci_controller_stopping_state_enter, + .exit_state = sci_controller_stopping_state_exit, + }, + [SCIC_STOPPED] = {}, + [SCIC_FAILED] = {} +}; + +static void sci_controller_set_default_config_parameters(struct isci_host *ihost) +{ + /* these defaults are overridden by the platform / firmware */ + u16 index; + + /* Default to APC mode. */ + ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + /* Default to APC mode. */ + ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1; + + /* Default to no SSC operation. */ + ihost->oem_parameters.controller.do_enable_ssc = false; + + /* Initialize all of the port parameter information to narrow ports. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + ihost->oem_parameters.ports[index].phy_mask = 0; + } + + /* Initialize all of the phy parameter information. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Default to 6G (i.e. Gen 3) for now. */ + ihost->user_parameters.phys[index].max_speed_generation = 3; + + /* the frequencies cannot be 0 */ + ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f; + ihost->user_parameters.phys[index].in_connection_align_insertion_frequency = 0xff; + ihost->user_parameters.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + + /* + * Previous Vitesse based expanders had a arbitration issue that + * is worked around by having the upper 32-bits of SAS address + * with a value greater then the Vitesse company identifier. + * Hence, usage of 0x5FCFFFFF. */ + ihost->oem_parameters.phys[index].sas_address.low = 0x1 + ihost->id; + ihost->oem_parameters.phys[index].sas_address.high = 0x5FCFFFFF; + } + + ihost->user_parameters.stp_inactivity_timeout = 5; + ihost->user_parameters.ssp_inactivity_timeout = 5; + ihost->user_parameters.stp_max_occupancy_timeout = 5; + ihost->user_parameters.ssp_max_occupancy_timeout = 20; + ihost->user_parameters.no_outbound_task_timeout = 20; +} + +static void controller_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), timer); + struct sci_base_state_machine *sm = &ihost->sm; + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + if (sm->current_state_id == SCIC_STARTING) + sci_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCIC_STOPPING) { + sci_change_state(sm, SCIC_FAILED); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(&ihost->pdev->dev, + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static enum sci_status sci_controller_construct(struct isci_host *ihost, + void __iomem *scu_base, + void __iomem *smu_base) +{ + u8 i; + + sci_init_sm(&ihost->sm, sci_controller_state_table, SCIC_INITIAL); + + ihost->scu_registers = scu_base; + ihost->smu_registers = smu_base; + + sci_port_configuration_agent_construct(&ihost->port_agent); + + /* Construct the ports for this controller */ + for (i = 0; i < SCI_MAX_PORTS; i++) + sci_port_construct(&ihost->ports[i], i, ihost); + sci_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost); + + /* Construct the phys for this controller */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + /* Add all the PHYs to the dummy port */ + sci_phy_construct(&ihost->phys[i], + &ihost->ports[SCI_MAX_PORTS], i); + } + + ihost->invalid_phy_mask = 0; + + sci_init_timer(&ihost->timer, controller_timeout); + + /* Initialize the User and OEM parameters to default values. */ + sci_controller_set_default_config_parameters(ihost); + + return sci_controller_reset(ihost); +} + +int sci_oem_parameters_validate(struct sci_oem_params *oem) +{ + int i; + + for (i = 0; i < SCI_MAX_PORTS; i++) + if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->phys[i].sas_address.high == 0 && + oem->phys[i].sas_address.low == 0) + return -EINVAL; + + if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->ports[i].phy_mask != 0) + return -EINVAL; + } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + u8 phy_mask = 0; + + for (i = 0; i < SCI_MAX_PHYS; i++) + phy_mask |= oem->ports[i].phy_mask; + + if (phy_mask == 0) + return -EINVAL; + } else + return -EINVAL; + + if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return -EINVAL; + + return 0; +} + +static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) +{ + u32 state = ihost->sm.current_state_id; + + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { + + if (sci_oem_parameters_validate(&ihost->oem_parameters)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static void power_control_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), power_control.timer); + struct isci_phy *iphy; + unsigned long flags; + u8 i; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + ihost->power_control.phys_granted_power = 0; + + if (ihost->power_control.phys_waiting == 0) { + ihost->power_control.timer_started = false; + goto done; + } + + for (i = 0; i < SCI_MAX_PHYS; i++) { + + if (ihost->power_control.phys_waiting == 0) + break; + + iphy = ihost->power_control.requesters[i]; + if (iphy == NULL) + continue; + + if (ihost->power_control.phys_granted_power >= + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) + break; + + ihost->power_control.requesters[i] = NULL; + ihost->power_control.phys_waiting--; + ihost->power_control.phys_granted_power++; + sci_phy_consume_power_handler(iphy); + } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. + */ + sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + ihost->power_control.timer_started = true; + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +void sci_controller_power_control_queue_insert(struct isci_host *ihost, + struct isci_phy *iphy) +{ + BUG_ON(iphy == NULL); + + if (ihost->power_control.phys_granted_power < + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) { + ihost->power_control.phys_granted_power++; + sci_phy_consume_power_handler(iphy); + + /* + * stop and start the power_control timer. When the timer fires, the + * no_of_phys_granted_power will be set to 0 + */ + if (ihost->power_control.timer_started) + sci_del_timer(&ihost->power_control.timer); + + sci_mod_timer(&ihost->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + ihost->power_control.timer_started = true; + + } else { + /* Add the phy in the waiting list */ + ihost->power_control.requesters[iphy->phy_index] = iphy; + ihost->power_control.phys_waiting++; + } +} + +void sci_controller_power_control_queue_remove(struct isci_host *ihost, + struct isci_phy *iphy) +{ + BUG_ON(iphy == NULL); + + if (ihost->power_control.requesters[iphy->phy_index]) + ihost->power_control.phys_waiting--; + + ihost->power_control.requesters[iphy->phy_index] = NULL; +} + +#define AFE_REGISTER_WRITE_DELAY 10 + +/* Initialize the AFE for this phy index. We need to read the AFE setup from + * the OEM parameters + */ +static void sci_controller_afe_initialization(struct isci_host *ihost) +{ + const struct sci_oem_params *oem = &ihost->oem_parameters; + struct pci_dev *pdev = ihost->pdev; + u32 afe_status; + u32 phy_id; + + /* Clear DFX Status registers */ + writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_b0(pdev)) { + /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement + * Timer, PM Stagger Timer */ + writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Configure bias currents to normal */ + if (is_a2(pdev)) + writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); + else if (is_b0(pdev) || is_c0(pdev)) + writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable PLL */ + if (is_b0(pdev) || is_c0(pdev)) + writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); + else + writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Wait for the PLL to lock */ + do { + afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); + udelay(AFE_REGISTER_WRITE_DELAY); + } while ((afe_status & 0x00001000) == 0); + + if (is_a2(pdev)) { + /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ + writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + + if (is_b0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } else if (is_c0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } else { + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + if (is_a2(pdev)) + writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else if (is_b0(pdev)) { + /* Power down TX and RX (PWRDNTX and PWRDNRX) */ + writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } else { + writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_a2(pdev)) { + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), + * RDD=0x0(RX Detect Enabled) ....(0xe800) */ + writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Leave DFE/FFE on */ + if (is_a2(pdev)) + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else if (is_b0(pdev)) { + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } else { + writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } + + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control0, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control1, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control2, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control3, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Transfer control to the PEs */ + writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); +} + +static void sci_controller_initialize_power_control(struct isci_host *ihost) +{ + sci_init_timer(&ihost->power_control.timer, power_control_timeout); + + memset(ihost->power_control.requesters, 0, + sizeof(ihost->power_control.requesters)); + + ihost->power_control.phys_waiting = 0; + ihost->power_control.phys_granted_power = 0; +} + +static enum sci_status sci_controller_initialize(struct isci_host *ihost) +{ + struct sci_base_state_machine *sm = &ihost->sm; + enum sci_status result = SCI_FAILURE; + unsigned long i, state, val; + + if (ihost->sm.current_state_id != SCIC_RESET) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller initialize operation requested " + "in invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(sm, SCIC_INITIALIZING); + + sci_init_timer(&ihost->phy_timer, phy_startup_timeout); + + ihost->next_phy_to_start = 0; + ihost->phy_startup_timer_pending = false; + + sci_controller_initialize_power_control(ihost); + + /* + * There is nothing to do here for B0 since we do not have to + * program the AFE registers. + * / @todo The AFE settings are supposed to be correct for the B0 but + * / presently they seem to be wrong. */ + sci_controller_afe_initialization(ihost); + + + /* Take the hardware out of reset */ + writel(0, &ihost->smu_registers->soft_reset_control); + + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + for (i = 100; i >= 1; i--) { + u32 status; + + /* Loop until the hardware reports success */ + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = readl(&ihost->smu_registers->control_status); + + if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) + break; + } + if (i == 0) + goto out; + + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + val = readl(&ihost->smu_registers->device_context_capacity); + + /* Record the smaller of the two capacity values */ + ihost->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS); + ihost->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS); + ihost->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES); + + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ + for (i = 0; i < ihost->logical_port_entries; i++) { + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &ihost->scu_registers->peg0.ptsg; + + writel(i, &ptsg->protocol_engine[i]); + } + + /* Initialize hardware PCI Relaxed ordering in DMA engines */ + val = readl(&ihost->scu_registers->sdma.pdma_configuration); + val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &ihost->scu_registers->sdma.pdma_configuration); + + val = readl(&ihost->scu_registers->sdma.cdma_configuration); + val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &ihost->scu_registers->sdma.cdma_configuration); + + /* + * Initialize the PHYs before the PORTs because the PHY registers + * are accessed during the port initialization. + */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + result = sci_phy_initialize(&ihost->phys[i], + &ihost->scu_registers->peg0.pe[i].tl, + &ihost->scu_registers->peg0.pe[i].ll); + if (result != SCI_SUCCESS) + goto out; + } + + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + + iport->port_task_scheduler_registers = &ihost->scu_registers->peg0.ptsg.port[i]; + iport->port_pe_configuration_register = &ihost->scu_registers->peg0.ptsg.protocol_engine[0]; + iport->viit_registers = &ihost->scu_registers->peg0.viit[i]; + } + + result = sci_port_configuration_agent_initialize(ihost, &ihost->port_agent); + + out: + /* Advance the controller state machine */ + if (result == SCI_SUCCESS) + state = SCIC_INITIALIZED; + else + state = SCIC_FAILED; + sci_change_state(sm, state); + + return result; +} + +static enum sci_status sci_user_parameters_set(struct isci_host *ihost, + struct sci_user_parameters *sci_parms) +{ + u32 state = ihost->sm.current_state_id; + + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { + u16 index; + + /* + * Validate the user parameters. If they are not legal, then + * return a failure. + */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct sci_phy_user_params *user_phy; + + user_phy = &sci_parms->phys[index]; + + if (!((user_phy->max_speed_generation <= + SCIC_SDS_PARM_MAX_SPEED) && + (user_phy->max_speed_generation > + SCIC_SDS_PARM_NO_SPEED))) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if (user_phy->in_connection_align_insertion_frequency < + 3) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if ((user_phy->in_connection_align_insertion_frequency < + 3) || + (user_phy->align_insertion_frequency == 0) || + (user_phy-> + notify_enable_spin_up_insertion_frequency == + 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + if ((sci_parms->stp_inactivity_timeout == 0) || + (sci_parms->ssp_inactivity_timeout == 0) || + (sci_parms->stp_max_occupancy_timeout == 0) || + (sci_parms->ssp_max_occupancy_timeout == 0) || + (sci_parms->no_outbound_task_timeout == 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms)); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static int sci_controller_mem_init(struct isci_host *ihost) +{ + struct device *dev = &ihost->pdev->dev; + dma_addr_t dma; + size_t size; + int err; + + size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32); + ihost->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->completion_queue) + return -ENOMEM; + + writel(lower_32_bits(dma), &ihost->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->completion_queue_upper); + + size = ihost->remote_node_entries * sizeof(union scu_remote_node_context); + ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, + GFP_KERNEL); + if (!ihost->remote_node_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma), &ihost->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->remote_node_context_upper); + + size = ihost->task_context_entries * sizeof(struct scu_task_context), + ihost->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->task_context_table) + return -ENOMEM; + + ihost->task_context_dma = dma; + writel(lower_32_bits(dma), &ihost->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->host_task_table_upper); + + err = sci_unsolicited_frame_control_construct(ihost); + if (err) + return err; + + /* + * Inform the silicon as to the location of the UF headers and + * address table. + */ + writel(lower_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_upper); + + return 0; +} + +int isci_host_init(struct isci_host *ihost) +{ + int err = 0, i; + enum sci_status status; + struct sci_user_parameters sci_user_params; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); + + spin_lock_init(&ihost->state_lock); + spin_lock_init(&ihost->scic_lock); + init_waitqueue_head(&ihost->eventq); + + isci_host_change_state(ihost, isci_starting); + + status = sci_controller_construct(ihost, scu_base(ihost), + smu_base(ihost)); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: sci_controller_construct failed - status = %x\n", + __func__, + status); + return -ENODEV; + } + + ihost->sas_ha.dev = &ihost->pdev->dev; + ihost->sas_ha.lldd_ha = ihost; + + /* + * grab initial values stored in the controller object for OEM and USER + * parameters + */ + isci_user_parameters_get(&sci_user_params); + status = sci_user_parameters_set(ihost, &sci_user_params); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_user_parameters_set failed\n", + __func__); + return -ENODEV; + } + + /* grab any OEM parameters specified in orom */ + if (pci_info->orom) { + status = isci_parse_oem_parameters(&ihost->oem_parameters, + pci_info->orom, + ihost->id); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "parsing firmware oem parameters failed\n"); + return -EINVAL; + } + } + + status = sci_oem_parameters_set(ihost); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_oem_parameters_set failed\n", + __func__); + return -ENODEV; + } + + tasklet_init(&ihost->completion_tasklet, + isci_host_completion_routine, (unsigned long)ihost); + + INIT_LIST_HEAD(&ihost->requests_to_complete); + INIT_LIST_HEAD(&ihost->requests_to_errorback); + + spin_lock_irq(&ihost->scic_lock); + status = sci_controller_initialize(ihost); + spin_unlock_irq(&ihost->scic_lock); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_controller_initialize failed -" + " status = 0x%x\n", + __func__, status); + return -ENODEV; + } + + err = sci_controller_mem_init(ihost); + if (err) + return err; + + for (i = 0; i < SCI_MAX_PORTS; i++) + isci_port_init(&ihost->ports[i], ihost, i); + + for (i = 0; i < SCI_MAX_PHYS; i++) + isci_phy_init(&ihost->phys[i], ihost, i); + + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + struct isci_remote_device *idev = &ihost->devices[i]; + + INIT_LIST_HEAD(&idev->reqs_in_process); + INIT_LIST_HEAD(&idev->node); + } + + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq; + dma_addr_t dma; + + ireq = dmam_alloc_coherent(&ihost->pdev->dev, + sizeof(struct isci_request), &dma, + GFP_KERNEL); + if (!ireq) + return -ENOMEM; + + ireq->tc = &ihost->task_context_table[i]; + ireq->owning_controller = ihost; + spin_lock_init(&ireq->state_lock); + ireq->request_daddr = dma; + ireq->isci_host = ihost; + ihost->reqs[i] = ireq; + } + + return 0; +} + +void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + switch (ihost->sm.current_state_id) { + case SCIC_STARTING: + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, + iport, iphy); + sci_controller_start_next_phy(ihost); + break; + case SCIC_READY: + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, + iport, iphy); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: SCIC Controller linkup event from phy %d in " + "unexpected state %d\n", __func__, iphy->phy_index, + ihost->sm.current_state_id); + } +} + +void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + switch (ihost->sm.current_state_id) { + case SCIC_STARTING: + case SCIC_READY: + ihost->port_agent.link_down_handler(ihost, &ihost->port_agent, + iport, iphy); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: SCIC Controller linkdown event from phy %d in " + "unexpected state %d\n", + __func__, + iphy->phy_index, + ihost->sm.current_state_id); + } +} + +static bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost) +{ + u32 index; + + for (index = 0; index < ihost->remote_node_entries; index++) { + if ((ihost->device_table[index] != NULL) && + (ihost->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING)) + return true; + } + + return false; +} + +void sci_controller_remote_device_stopped(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + if (ihost->sm.current_state_id != SCIC_STOPPING) { + dev_dbg(&ihost->pdev->dev, + "SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + ihost, idev, + ihost->sm.current_state_id); + return; + } + + if (!sci_controller_has_remote_devices_stopping(ihost)) + sci_change_state(&ihost->sm, SCIC_STOPPED); +} + +void sci_controller_post_request(struct isci_host *ihost, u32 request) +{ + dev_dbg(&ihost->pdev->dev, "%s[%d]: %#x\n", + __func__, ihost->id, request); + + writel(request, &ihost->smu_registers->post_context_port); +} + +struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag) +{ + u16 task_index; + u16 task_sequence; + + task_index = ISCI_TAG_TCI(io_tag); + + if (task_index < ihost->task_context_entries) { + struct isci_request *ireq = ihost->reqs[task_index]; + + if (test_bit(IREQ_ACTIVE, &ireq->flags)) { + task_sequence = ISCI_TAG_SEQ(io_tag); + + if (task_sequence == ihost->io_request_sequence[task_index]) + return ireq; + } + } + + return NULL; +} + +/** + * This method allocates remote node index and the reserves the remote node + * context space for use. This method can fail if there are no more remote + * node index available. + * @scic: This is the controller object which contains the set of + * free remote node ids + * @sci_dev: This is the device object which is requesting the a remote node + * id + * @node_id: This is the remote node id that is assinged to the device if one + * is available + * + * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote + * node index available. + */ +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 *node_id) +{ + u16 node_index; + u32 remote_node_count = sci_remote_device_node_count(idev); + + node_index = sci_remote_node_table_allocate_remote_node( + &ihost->available_remote_nodes, remote_node_count + ); + + if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + ihost->device_table[node_index] = idev; + + *node_id = node_index; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +void sci_controller_free_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 node_id) +{ + u32 remote_node_count = sci_remote_device_node_count(idev); + + if (ihost->device_table[node_id] == idev) { + ihost->device_table[node_id] = NULL; + + sci_remote_node_table_release_remote_node_index( + &ihost->available_remote_nodes, remote_node_count, node_id + ); + } +} + +void sci_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer) +{ + /* XXX type safety? */ + memcpy(response_buffer, frame_header, sizeof(u32)); + + memcpy(response_buffer + sizeof(u32), + frame_buffer, + sizeof(struct dev_to_host_fis) - sizeof(u32)); +} + +void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index) +{ + if (sci_unsolicited_frame_control_release_frame(&ihost->uf_control, frame_index)) + writel(ihost->uf_control.get, + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +void isci_tci_free(struct isci_host *ihost, u16 tci) +{ + u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1); + + ihost->tci_pool[tail] = tci; + ihost->tci_tail = tail + 1; +} + +static u16 isci_tci_alloc(struct isci_host *ihost) +{ + u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1); + u16 tci = ihost->tci_pool[head]; + + ihost->tci_head = head + 1; + return tci; +} + +static u16 isci_tci_space(struct isci_host *ihost) +{ + return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +u16 isci_alloc_tag(struct isci_host *ihost) +{ + if (isci_tci_space(ihost)) { + u16 tci = isci_tci_alloc(ihost); + u8 seq = ihost->io_request_sequence[tci]; + + return ISCI_TAG(seq, tci); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) +{ + u16 tci = ISCI_TAG_TCI(io_tag); + u16 seq = ISCI_TAG_SEQ(io_tag); + + /* prevent tail from passing head */ + if (isci_tci_active(ihost) == 0) + return SCI_FAILURE_INVALID_IO_TAG; + + if (seq == ihost->io_request_sequence[tci]) { + ihost->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); + + isci_tci_free(ihost, tci); + + return SCI_SUCCESS; + } + return SCI_FAILURE_INVALID_IO_TAG; +} + +enum sci_status sci_controller_start_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to start I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_remote_device_start_io(ihost, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + return SCI_SUCCESS; +} + +enum sci_status sci_controller_terminate_request(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + /* terminate an ongoing (i.e. started) core IO request. This does not + * abort the IO request at the target, but rather removes the IO + * request from the host controller. + */ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "invalid state to terminate request\n"); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_io_request_terminate(ireq); + if (status != SCI_SUCCESS) + return status; + + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + sci_controller_post_request(ihost, + ireq->post_context | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; +} + +/** + * sci_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @ihost: The handle to the controller object for which to complete the + * IO request. + * @idev: The handle to the remote device object for which to complete + * the IO request. + * @ireq: the handle to the io request object to complete. + */ +enum sci_status sci_controller_complete_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + u16 index; + + switch (ihost->sm.current_state_id) { + case SCIC_STOPPING: + /* XXX: Implement this function */ + return SCI_FAILURE; + case SCIC_READY: + status = sci_remote_device_complete_io(ihost, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + index = ISCI_TAG_TCI(ireq->io_tag); + clear_bit(IREQ_ACTIVE, &ireq->flags); + return SCI_SUCCESS; + default: + dev_warn(&ihost->pdev->dev, "invalid state to complete I/O"); + return SCI_FAILURE_INVALID_STATE; + } + +} + +enum sci_status sci_controller_continue_io(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->owning_controller; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to continue I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + return SCI_SUCCESS; +} + +/** + * sci_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + */ +enum sci_task_status sci_controller_start_task(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller starting task from invalid " + "state\n", + __func__); + return SCI_TASK_FAILURE_INVALID_STATE; + } + + status = sci_remote_device_start_task(ihost, idev, ireq); + switch (status) { + case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: + set_bit(IREQ_ACTIVE, &ireq->flags); + + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) + */ + return SCI_SUCCESS; + case SCI_SUCCESS: + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + break; + default: + break; + } + + return status; +} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h new file mode 100644 index 000000000000..062101a39f79 --- /dev/null +++ b/drivers/scsi/isci/host.h @@ -0,0 +1,542 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _SCI_HOST_H_ +#define _SCI_HOST_H_ + +#include "remote_device.h" +#include "phy.h" +#include "isci.h" +#include "remote_node_table.h" +#include "registers.h" +#include "unsolicited_frame_control.h" +#include "probe_roms.h" + +struct isci_request; +struct scu_task_context; + + +/** + * struct sci_power_control - + * + * This structure defines the fields for managing power control for direct + * attached disk devices. + */ +struct sci_power_control { + /** + * This field is set when the power control timer is running and cleared when + * it is not. + */ + bool timer_started; + + /** + * Timer to control when the directed attached disks can consume power. + */ + struct sci_timer timer; + + /** + * This field is used to keep track of how many phys are put into the + * requesters field. + */ + u8 phys_waiting; + + /** + * This field is used to keep track of how many phys have been granted to consume power + */ + u8 phys_granted_power; + + /** + * This field is an array of phys that we are waiting on. The phys are direct + * mapped into requesters via struct sci_phy.phy_index + */ + struct isci_phy *requesters[SCI_MAX_PHYS]; + +}; + +struct sci_port_configuration_agent; +typedef void (*port_config_fn)(struct isci_host *, + struct sci_port_configuration_agent *, + struct isci_port *, struct isci_phy *); + +struct sci_port_configuration_agent { + u16 phy_configured_mask; + u16 phy_ready_mask; + struct { + u8 min_index; + u8 max_index; + } phy_valid_port_range[SCI_MAX_PHYS]; + bool timer_pending; + port_config_fn link_up_handler; + port_config_fn link_down_handler; + struct sci_timer timer; +}; + +/** + * isci_host - primary host/controller object + * @timer: timeout start/stop operations + * @device_table: rni (hw remote node index) to remote device lookup table + * @available_remote_nodes: rni allocator + * @power_control: manage device spin up + * @io_request_sequence: generation number for tci's (task contexts) + * @task_context_table: hw task context table + * @remote_node_context_table: hw remote node context table + * @completion_queue: hw-producer driver-consumer communication ring + * @completion_queue_get: tracks the driver 'head' of the ring to notify hw + * @logical_port_entries: min({driver|silicon}-supported-port-count) + * @remote_node_entries: min({driver|silicon}-supported-node-count) + * @task_context_entries: min({driver|silicon}-supported-task-count) + * @phy_timer: phy startup timer + * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for + * the phy index is set so further notifications are not + * made. Once the phy reports link up and is made part of a + * port then this bit is cleared. + + */ +struct isci_host { + struct sci_base_state_machine sm; + /* XXX can we time this externally */ + struct sci_timer timer; + /* XXX drop reference module params directly */ + struct sci_user_parameters user_parameters; + /* XXX no need to be a union */ + struct sci_oem_params oem_parameters; + struct sci_port_configuration_agent port_agent; + struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + struct sci_remote_node_table available_remote_nodes; + struct sci_power_control power_control; + u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; + struct scu_task_context *task_context_table; + dma_addr_t task_context_dma; + union scu_remote_node_context *remote_node_context_table; + u32 *completion_queue; + u32 completion_queue_get; + u32 logical_port_entries; + u32 remote_node_entries; + u32 task_context_entries; + struct sci_unsolicited_frame_control uf_control; + + /* phy startup */ + struct sci_timer phy_timer; + /* XXX kill */ + bool phy_startup_timer_pending; + u32 next_phy_to_start; + /* XXX convert to unsigned long and use bitops */ + u8 invalid_phy_mask; + + /* TODO attempt dynamic interrupt coalescing scheme */ + u16 interrupt_coalesce_number; + u32 interrupt_coalesce_timeout; + struct smu_registers __iomem *smu_registers; + struct scu_registers __iomem *scu_registers; + + u16 tci_head; + u16 tci_tail; + u16 tci_pool[SCI_MAX_IO_REQUESTS]; + + int id; /* unique within a given pci device */ + struct isci_phy phys[SCI_MAX_PHYS]; + struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ + struct sas_ha_struct sas_ha; + + spinlock_t state_lock; + struct pci_dev *pdev; + enum isci_status status; + #define IHOST_START_PENDING 0 + #define IHOST_STOP_PENDING 1 + unsigned long flags; + wait_queue_head_t eventq; + struct Scsi_Host *shost; + struct tasklet_struct completion_tasklet; + struct list_head requests_to_complete; + struct list_head requests_to_errorback; + spinlock_t scic_lock; + struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; + struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; +}; + +/** + * enum sci_controller_states - This enumeration depicts all the states + * for the common controller state machine. + */ +enum sci_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCIC_INITIAL = 0, + + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCIC_RESET, + + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCIC_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCIC_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCIC_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCIC_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCIC_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCIC_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCIC_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCIC_FAILED, +}; + +/** + * struct isci_pci_info - This class represents the pci function containing the + * controllers. Depending on PCI SKU, there could be up to 2 controllers in + * the PCI function. + */ +#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS) + +struct isci_pci_info { + struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; + struct isci_host *hosts[SCI_MAX_CONTROLLERS]; + struct isci_orom *orom; +}; + +static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) +{ + return pci_get_drvdata(pdev); +} + +#define for_each_isci_host(id, ihost, pdev) \ + for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \ + id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ + ihost = to_pci_info(pdev)->hosts[++id]) + +static inline enum isci_status isci_host_get_state(struct isci_host *isci_host) +{ + return isci_host->status; +} + +static inline void isci_host_change_state(struct isci_host *isci_host, + enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, state = 0x%x", + __func__, + isci_host, + status); + spin_lock_irqsave(&isci_host->state_lock, flags); + isci_host->status = status; + spin_unlock_irqrestore(&isci_host->state_lock, flags); + +} + +static inline void wait_for_start(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); +} + +static inline void wait_for_stop(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); +} + +static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev) +{ + wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags)); +} + +static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) +{ + wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); +} + +static inline struct isci_host *dev_to_ihost(struct domain_device *dev) +{ + return dev->port->ha->lldd_ha; +} + +/* we always use protocol engine group zero */ +#define ISCI_PEG 0 + +/* see sci_controller_io_tag_allocate|free for how seq and tci are built */ +#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) + +/* these are returned by the hardware, so sanitize them */ +#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) +#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) + +/* expander attached sata devices require 3 rnc slots */ +static inline int sci_remote_device_node_count(struct isci_remote_device *idev) +{ + struct domain_device *dev = idev->domain_dev; + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !idev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} + +/** + * sci_controller_clear_invalid_phy() - + * + * This macro will clear the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define sci_controller_clear_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) + +static inline struct device *sciphy_to_dev(struct isci_phy *iphy) +{ + + if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) + return NULL; + + return &iphy->isci_port->isci_host->pdev->dev; +} + +static inline struct device *sciport_to_dev(struct isci_port *iport) +{ + + if (!iport || !iport->isci_host) + return NULL; + + return &iport->isci_host->pdev->dev; +} + +static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) +{ + if (!idev || !idev->isci_port || !idev->isci_port->isci_host) + return NULL; + + return &idev->isci_port->isci_host->pdev->dev; +} + +static inline bool is_a2(struct pci_dev *pdev) +{ + if (pdev->revision < 4) + return true; + return false; +} + +static inline bool is_b0(struct pci_dev *pdev) +{ + if (pdev->revision == 4) + return true; + return false; +} + +static inline bool is_c0(struct pci_dev *pdev) +{ + if (pdev->revision >= 5) + return true; + return false; +} + +void sci_controller_post_request(struct isci_host *ihost, + u32 request); +void sci_controller_release_frame(struct isci_host *ihost, + u32 frame_index); +void sci_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer); +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 *node_id); +void sci_controller_free_remote_node_context( + struct isci_host *ihost, + struct isci_remote_device *idev, + u16 node_id); + +struct isci_request *sci_request_by_tag(struct isci_host *ihost, + u16 io_tag); + +void sci_controller_power_control_queue_insert( + struct isci_host *ihost, + struct isci_phy *iphy); + +void sci_controller_power_control_queue_remove( + struct isci_host *ihost, + struct isci_phy *iphy); + +void sci_controller_link_up( + struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_controller_link_down( + struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_controller_remote_device_stopped( + struct isci_host *ihost, + struct isci_remote_device *idev); + +void sci_controller_copy_task_context( + struct isci_host *ihost, + struct isci_request *ireq); + +void sci_controller_register_setup(struct isci_host *ihost); + +enum sci_status sci_controller_continue_io(struct isci_request *ireq); +int isci_host_scan_finished(struct Scsi_Host *, unsigned long); +void isci_host_scan_start(struct Scsi_Host *); +u16 isci_alloc_tag(struct isci_host *ihost); +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag); +void isci_tci_free(struct isci_host *ihost, u16 tci); + +int isci_host_init(struct isci_host *); + +void isci_host_init_controller_names( + struct isci_host *isci_host, + unsigned int controller_idx); + +void isci_host_deinit( + struct isci_host *); + +void isci_host_port_link_up( + struct isci_host *, + struct isci_port *, + struct isci_phy *); +int isci_host_dev_found(struct domain_device *); + +void isci_host_remote_device_start_complete( + struct isci_host *, + struct isci_remote_device *, + enum sci_status); + +void sci_controller_disable_interrupts( + struct isci_host *ihost); + +enum sci_status sci_controller_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_task_status sci_controller_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_controller_terminate_request( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_controller_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent); + +enum sci_status sci_port_configuration_agent_initialize( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent); +#endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c new file mode 100644 index 000000000000..61e0d09e2b57 --- /dev/null +++ b/drivers/scsi/isci/init.c @@ -0,0 +1,565 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/efi.h> +#include <asm/string.h> +#include "isci.h" +#include "task.h" +#include "probe_roms.h" + +static struct scsi_transport_template *isci_transport_template; + +static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { + { PCI_VDEVICE(INTEL, 0x1D61),}, + { PCI_VDEVICE(INTEL, 0x1D63),}, + { PCI_VDEVICE(INTEL, 0x1D65),}, + { PCI_VDEVICE(INTEL, 0x1D67),}, + { PCI_VDEVICE(INTEL, 0x1D69),}, + { PCI_VDEVICE(INTEL, 0x1D6B),}, + { PCI_VDEVICE(INTEL, 0x1D60),}, + { PCI_VDEVICE(INTEL, 0x1D62),}, + { PCI_VDEVICE(INTEL, 0x1D64),}, + { PCI_VDEVICE(INTEL, 0x1D66),}, + { PCI_VDEVICE(INTEL, 0x1D68),}, + { PCI_VDEVICE(INTEL, 0x1D6A),}, + {} +}; + +MODULE_DEVICE_TABLE(pci, isci_id_table); + +/* linux isci specific settings */ + +unsigned char no_outbound_task_to = 20; +module_param(no_outbound_task_to, byte, 0); +MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); + +u16 ssp_max_occ_to = 20; +module_param(ssp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)"); + +u16 stp_max_occ_to = 5; +module_param(stp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)"); + +u16 ssp_inactive_to = 5; +module_param(ssp_inactive_to, ushort, 0); +MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)"); + +u16 stp_inactive_to = 5; +module_param(stp_inactive_to, ushort, 0); +MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); + +unsigned char phy_gen = 3; +module_param(phy_gen, byte, 0); +MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); + +unsigned char max_concurr_spinup = 1; +module_param(max_concurr_spinup, byte, 0); +MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); + +static struct scsi_host_template isci_sht = { + + .module = THIS_MODULE, + .name = DRV_NAME, + .proc_name = DRV_NAME, + .queuecommand = sas_queuecommand, + .target_alloc = sas_target_alloc, + .slave_configure = sas_slave_configure, + .slave_destroy = sas_slave_destroy, + .scan_finished = isci_host_scan_finished, + .scan_start = isci_host_scan_start, + .change_queue_depth = sas_change_queue_depth, + .change_queue_type = sas_change_queue_type, + .bios_param = sas_bios_param, + .can_queue = ISCI_CAN_QUEUE_VAL, + .cmd_per_lun = 1, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = SCSI_DEFAULT_MAX_SECTORS, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = sas_eh_device_reset_handler, + .eh_bus_reset_handler = isci_bus_reset_handler, + .slave_alloc = sas_slave_alloc, + .target_destroy = sas_target_destroy, + .ioctl = sas_ioctl, +}; + +static struct sas_domain_function_template isci_transport_ops = { + + /* The class calls these to notify the LLDD of an event. */ + .lldd_port_formed = isci_port_formed, + .lldd_port_deformed = isci_port_deformed, + + /* The class calls these when a device is found or gone. */ + .lldd_dev_found = isci_remote_device_found, + .lldd_dev_gone = isci_remote_device_gone, + + .lldd_execute_task = isci_task_execute_task, + /* Task Management Functions. Must be called from process context. */ + .lldd_abort_task = isci_task_abort_task, + .lldd_abort_task_set = isci_task_abort_task_set, + .lldd_clear_aca = isci_task_clear_aca, + .lldd_clear_task_set = isci_task_clear_task_set, + .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset, + .lldd_lu_reset = isci_task_lu_reset, + .lldd_query_task = isci_task_query_task, + + /* Port and Adapter management */ + .lldd_clear_nexus_port = isci_task_clear_nexus_port, + .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, + + /* Phy management */ + .lldd_control_phy = isci_phy_control, +}; + + +/****************************************************************************** +* P R O T E C T E D M E T H O D S +******************************************************************************/ + + + +/** + * isci_register_sas_ha() - This method initializes various lldd + * specific members of the sas_ha struct and calls the libsas + * sas_register_ha() function. + * @isci_host: This parameter specifies the lldd specific wrapper for the + * libsas sas_ha struct. + * + * This method returns an error code indicating sucess or failure. The user + * should check for possible memory allocation error return otherwise, a zero + * indicates success. + */ +static int isci_register_sas_ha(struct isci_host *isci_host) +{ + int i; + struct sas_ha_struct *sas_ha = &(isci_host->sas_ha); + struct asd_sas_phy **sas_phys; + struct asd_sas_port **sas_ports; + + sas_phys = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PHYS * sizeof(void *), + GFP_KERNEL); + if (!sas_phys) + return -ENOMEM; + + sas_ports = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PORTS * sizeof(void *), + GFP_KERNEL); + if (!sas_ports) + return -ENOMEM; + + /*----------------- Libsas Initialization Stuff---------------------- + * Set various fields in the sas_ha struct: + */ + + sas_ha->sas_ha_name = DRV_NAME; + sas_ha->lldd_module = THIS_MODULE; + sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; + + /* set the array of phy and port structs. */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + sas_phys[i] = &isci_host->phys[i].sas_phy; + sas_ports[i] = &isci_host->ports[i].sas_port; + } + + sas_ha->sas_phy = sas_phys; + sas_ha->sas_port = sas_ports; + sas_ha->num_phys = SCI_MAX_PHYS; + + sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL; + sas_ha->lldd_max_execute_num = 1; + sas_ha->strict_wide_ports = 1; + + sas_register_ha(sas_ha); + + return 0; +} + +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +static void isci_unregister(struct isci_host *isci_host) +{ + struct Scsi_Host *shost; + + if (!isci_host) + return; + + shost = isci_host->shost; + device_remove_file(&shost->shost_dev, &dev_attr_isci_id); + + sas_unregister_ha(&isci_host->sas_ha); + + sas_remove_host(isci_host->shost); + scsi_remove_host(isci_host->shost); + scsi_host_put(isci_host->shost); +} + +static int __devinit isci_pci_init(struct pci_dev *pdev) +{ + int err, bar_num, bar_mask = 0; + void __iomem * const *iomap; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, + "failed enable PCI device %s!\n", + pci_name(pdev)); + return err; + } + + for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++) + bar_mask |= 1 << (bar_num * 2); + + err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME); + if (err) + return err; + + iomap = pcim_iomap_table(pdev); + if (!iomap) + return -ENOMEM; + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + return 0; +} + +static int num_controllers(struct pci_dev *pdev) +{ + /* bar size alone can tell us if we are running with a dual controller + * part, no need to trust revision ids that might be under broken firmware + * control + */ + resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); + resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); + + if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && + smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) + return SCI_MAX_CONTROLLERS; + else + return 1; +} + +static int isci_setup_interrupts(struct pci_dev *pdev) +{ + int err, i, num_msix; + struct isci_host *ihost; + struct isci_pci_info *pci_info = to_pci_info(pdev); + + /* + * Determine the number of vectors associated with this + * PCI function. + */ + num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT; + + for (i = 0; i < num_msix; i++) + pci_info->msix_entries[i].entry = i; + + err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix); + if (err) + goto intx; + + for (i = 0; i < num_msix; i++) { + int id = i / SCI_NUM_MSI_X_INT; + struct msix_entry *msix = &pci_info->msix_entries[i]; + irq_handler_t isr; + + ihost = pci_info->hosts[id]; + /* odd numbered vectors are error interrupts */ + if (i & 1) + isr = isci_error_isr; + else + isr = isci_msix_isr; + + err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, + DRV_NAME"-msix", ihost); + if (!err) + continue; + + dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); + while (i--) { + id = i / SCI_NUM_MSI_X_INT; + ihost = pci_info->hosts[id]; + msix = &pci_info->msix_entries[i]; + devm_free_irq(&pdev->dev, msix->vector, ihost); + } + pci_disable_msix(pdev); + goto intx; + } + return 0; + + intx: + for_each_isci_host(i, ihost, pdev) { + err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, + IRQF_SHARED, DRV_NAME"-intx", ihost); + if (err) + break; + } + return err; +} + +static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) +{ + struct isci_host *isci_host; + struct Scsi_Host *shost; + int err; + + isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); + if (!isci_host) + return NULL; + + isci_host->pdev = pdev; + isci_host->id = id; + + shost = scsi_host_alloc(&isci_sht, sizeof(void *)); + if (!shost) + return NULL; + isci_host->shost = shost; + + err = isci_host_init(isci_host); + if (err) + goto err_shost; + + SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha; + isci_host->sas_ha.core.shost = shost; + shost->transportt = isci_transport_template; + + shost->max_id = ~0; + shost->max_lun = ~0; + shost->max_cmd_len = MAX_COMMAND_SIZE; + + err = scsi_add_host(shost, &pdev->dev); + if (err) + goto err_shost; + + err = isci_register_sas_ha(isci_host); + if (err) + goto err_shost_remove; + + err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); + if (err) + goto err_unregister_ha; + + return isci_host; + + err_unregister_ha: + sas_unregister_ha(&(isci_host->sas_ha)); + err_shost_remove: + scsi_remove_host(shost); + err_shost: + scsi_host_put(shost); + + return NULL; +} + +static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct isci_pci_info *pci_info; + int err, i; + struct isci_host *isci_host; + const struct firmware *fw = NULL; + struct isci_orom *orom = NULL; + char *source = "(platform)"; + + dev_info(&pdev->dev, "driver configured for rev: %d silicon\n", + pdev->revision); + + pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); + if (!pci_info) + return -ENOMEM; + pci_set_drvdata(pdev, pci_info); + + if (efi_enabled) + orom = isci_get_efi_var(pdev); + + if (!orom) + orom = isci_request_oprom(pdev); + + for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { + if (sci_oem_parameters_validate(&orom->ctrl[i])) { + dev_warn(&pdev->dev, + "[%d]: invalid oem parameters detected, falling back to firmware\n", i); + devm_kfree(&pdev->dev, orom); + orom = NULL; + break; + } + } + + if (!orom) { + source = "(firmware)"; + orom = isci_request_firmware(pdev, fw); + if (!orom) { + /* TODO convert this to WARN_TAINT_ONCE once the + * orom/efi parameter support is widely available + */ + dev_warn(&pdev->dev, + "Loading user firmware failed, using default " + "values\n"); + dev_warn(&pdev->dev, + "Default OEM configuration being used: 4 " + "narrow ports, and default SAS Addresses\n"); + } + } + + if (orom) + dev_info(&pdev->dev, + "OEM SAS parameters (version: %u.%u) loaded %s\n", + (orom->hdr.version & 0xf0) >> 4, + (orom->hdr.version & 0xf), source); + + pci_info->orom = orom; + + err = isci_pci_init(pdev); + if (err) + return err; + + for (i = 0; i < num_controllers(pdev); i++) { + struct isci_host *h = isci_host_alloc(pdev, i); + + if (!h) { + err = -ENOMEM; + goto err_host_alloc; + } + pci_info->hosts[i] = h; + } + + err = isci_setup_interrupts(pdev); + if (err) + goto err_host_alloc; + + for_each_isci_host(i, isci_host, pdev) + scsi_scan_host(isci_host->shost); + + return 0; + + err_host_alloc: + for_each_isci_host(i, isci_host, pdev) + isci_unregister(isci_host); + return err; +} + +static void __devexit isci_pci_remove(struct pci_dev *pdev) +{ + struct isci_host *ihost; + int i; + + for_each_isci_host(i, ihost, pdev) { + isci_unregister(ihost); + isci_host_deinit(ihost); + sci_controller_disable_interrupts(ihost); + } +} + +static struct pci_driver isci_pci_driver = { + .name = DRV_NAME, + .id_table = isci_id_table, + .probe = isci_pci_probe, + .remove = __devexit_p(isci_pci_remove), +}; + +static __init int isci_init(void) +{ + int err; + + pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + + isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); + if (!isci_transport_template) + return -ENOMEM; + + err = pci_register_driver(&isci_pci_driver); + if (err) + sas_release_transport(isci_transport_template); + + return err; +} + +static __exit void isci_exit(void) +{ + pci_unregister_driver(&isci_pci_driver); + sas_release_transport(isci_transport_template); +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(ISCI_FW_NAME); +module_init(isci_init); +module_exit(isci_exit); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h new file mode 100644 index 000000000000..d1de63312e7f --- /dev/null +++ b/drivers/scsi/isci/isci.h @@ -0,0 +1,538 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __ISCI_H__ +#define __ISCI_H__ + +#include <linux/interrupt.h> +#include <linux/types.h> + +#define DRV_NAME "isci" +#define SCI_PCI_BAR_COUNT 2 +#define SCI_NUM_MSI_X_INT 2 +#define SCI_SMU_BAR 0 +#define SCI_SMU_BAR_SIZE (16*1024) +#define SCI_SCU_BAR 1 +#define SCI_SCU_BAR_SIZE (4*1024*1024) +#define SCI_IO_SPACE_BAR0 2 +#define SCI_IO_SPACE_BAR1 3 +#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ +#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 + +#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF + +#define SCI_MAX_PHYS (4UL) +#define SCI_MAX_PORTS SCI_MAX_PHYS +#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ +#define SCI_MAX_REMOTE_DEVICES (256UL) +#define SCI_MAX_IO_REQUESTS (256UL) +#define SCI_MAX_SEQ (16) +#define SCI_MAX_MSIX_MESSAGES (2) +#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ +#define SCI_MAX_CONTROLLERS 2 +#define SCI_MAX_DOMAINS SCI_MAX_PORTS + +#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) +#define SCU_MAX_EVENTS_SHIFT (7) +#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) +#define SCU_MAX_UNSOLICITED_FRAMES (128) +#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) +#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + + SCU_MAX_EVENTS \ + + SCU_MAX_UNSOLICITED_FRAMES \ + + SCI_MAX_IO_REQUESTS \ + + SCU_MAX_COMPLETION_QUEUE_SCRATCH) +#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) + +#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) +#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) +#define SCU_INVALID_FRAME_INDEX (0xFFFF) + +#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) +#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) + +static inline void check_sizes(void) +{ + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); +} + +/** + * enum sci_status - This is the general return status enumeration for non-IO, + * non-task management related SCI interface methods. + * + * + */ +enum sci_status { + /** + * This member indicates successful completion. + */ + SCI_SUCCESS = 0, + + /** + * This value indicates that the calling method completed successfully, + * but that the IO may have completed before having it's start method + * invoked. This occurs during SAT translation for requests that do + * not require an IO to the target or for any other requests that may + * be completed without having to submit IO. + */ + SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + + /** + * This Value indicates that the SCU hardware returned an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). The completion routine + * will handle this case to get the actual number of bytes transferred. + */ + SCI_SUCCESS_IO_DONE_EARLY, + + /** + * This member indicates that the object for which a state change is + * being requested is already in said state. + */ + SCI_WARNING_ALREADY_IN_STATE, + + /** + * This member indicates interrupt coalescence timer may cause SAS + * specification compliance issues (i.e. SMP target mode response + * frames must be returned within 1.9 milliseconds). + */ + SCI_WARNING_TIMER_CONFLICT, + + /** + * This field indicates a sequence of action is not completed yet. Mostly, + * this status is used when multiple ATA commands are needed in a SATI translation. + */ + SCI_WARNING_SEQUENCE_INCOMPLETE, + + /** + * This member indicates that there was a general failure. + */ + SCI_FAILURE, + + /** + * This member indicates that the SCI implementation is unable to complete + * an operation due to a critical flaw the prevents any further operation + * (i.e. an invalid pointer). + */ + SCI_FATAL_ERROR, + + /** + * This member indicates the calling function failed, because the state + * of the controller is in a state that prevents successful completion. + */ + SCI_FAILURE_INVALID_STATE, + + /** + * This member indicates the calling function failed, because there is + * insufficient resources/memory to complete the request. + */ + SCI_FAILURE_INSUFFICIENT_RESOURCES, + + /** + * This member indicates the calling function failed, because the + * controller object required for the operation can't be located. + */ + SCI_FAILURE_CONTROLLER_NOT_FOUND, + + /** + * This member indicates the calling function failed, because the + * discovered controller type is not supported by the library. + */ + SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, + + /** + * This member indicates the calling function failed, because the + * requested initialization data version isn't supported. + */ + SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, + + /** + * This member indicates the calling function failed, because the + * requested configuration of SAS Phys into SAS Ports is not supported. + */ + SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, + + /** + * This member indicates the calling function failed, because the + * requested protocol is not supported by the remote device, port, + * or controller. + */ + SCI_FAILURE_UNSUPPORTED_PROTOCOL, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, + + /** + * This member indicates the calling function failed, because the + * device already exists. + */ + SCI_FAILURE_DEVICE_EXISTS, + + /** + * This member indicates the calling function failed, because adding + * a phy to the object is not possible. + */ + SCI_FAILURE_ADDING_PHY_UNSUPPORTED, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, + + /** + * This member indicates the calling function failed, because the SCI + * implementation does not support the supplied time limit. + */ + SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Phy. + */ + SCI_FAILURE_INVALID_PHY, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Port. + */ + SCI_FAILURE_INVALID_PORT, + + /** + * This member indicates the calling method was partly successful + * The port was reset but not all phys in port are operational + */ + SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, + + /** + * This member indicates that calling method failed + * The port reset did not complete because none of the phys are operational + */ + SCI_FAILURE_RESET_PORT_FAILURE, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified remote device. + */ + SCI_FAILURE_INVALID_REMOTE_DEVICE, + + /** + * This member indicates the calling method failed, because the remote + * device is in a bad state and requires a reset. + */ + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain or support the specified IO tag. + */ + SCI_FAILURE_INVALID_IO_TAG, + + /** + * This member indicates that the operation failed and the user should + * check the response data associated with the IO. + */ + SCI_FAILURE_IO_RESPONSE_VALID, + + /** + * This member indicates that the operation failed, the failure is + * controller implementation specific, and the response data associated + * with the request is not valid. You can query for the controller + * specific error information via sci_controller_get_request_status() + */ + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + + /** + * This member indicated that the operation failed because the + * user requested this IO to be terminated. + */ + SCI_FAILURE_IO_TERMINATED, + + /** + * This member indicates that the operation failed and the associated + * request requires a SCSI abort task to be sent to the target. + */ + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + + /** + * This member indicates that the operation failed because the supplied + * device could not be located. + */ + SCI_FAILURE_DEVICE_NOT_FOUND, + + /** + * This member indicates that the operation failed because the + * objects association is required and is not correctly set. + */ + SCI_FAILURE_INVALID_ASSOCIATION, + + /** + * This member indicates that the operation failed, because a timeout + * occurred. + */ + SCI_FAILURE_TIMEOUT, + + /** + * This member indicates that the operation failed, because the user + * specified a value that is either invalid or not supported. + */ + SCI_FAILURE_INVALID_PARAMETER_VALUE, + + /** + * This value indicates that the operation failed, because the number + * of messages (MSI-X) is not supported. + */ + SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, + + /** + * This value indicates that the method failed due to a lack of + * available NCQ tags. + */ + SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + + /** + * This value indicates that a protocol violation has occurred on the + * link. + */ + SCI_FAILURE_PROTOCOL_VIOLATION, + + /** + * This value indicates a failure condition that retry may help to clear. + */ + SCI_FAILURE_RETRY_REQUIRED, + + /** + * This field indicates the retry limit was reached when a retry is attempted + */ + SCI_FAILURE_RETRY_LIMIT_REACHED, + + /** + * This member indicates the calling method was partly successful. + * Mostly, this status is used when a LUN_RESET issued to an expander attached + * STP device in READY NCQ substate needs to have RNC suspended/resumed + * before posting TC. + */ + SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, + + /** + * This field indicates an illegal phy connection based on the routing attribute + * of both expander phy attached to each other. + */ + SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, + + /** + * This field indicates a CONFIG ROUTE INFO command has a response with function result + * INDEX DOES NOT EXIST, usually means exceeding max route index. + */ + SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, + + /** + * This value indicates that an unsupported PCI device ID has been + * specified. This indicates that attempts to invoke + * sci_library_allocate_controller() will fail. + */ + SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID + +}; + +/** + * enum sci_io_status - This enumeration depicts all of the possible IO + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Add the API to retrieve the SCU status from the core. Check to see that the + * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL + * - SCI_IO_FAILURE_INVALID_IO_TAG + */ +enum sci_io_status { + SCI_IO_SUCCESS = SCI_SUCCESS, + SCI_IO_FAILURE = SCI_FAILURE, + SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, + SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, + + SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, + SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, + SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE +}; + +/** + * enum sci_task_status - This enumeration depicts all of the possible task + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Check to see that the following status are properly handled: + */ +enum sci_task_status { + SCI_TASK_SUCCESS = SCI_SUCCESS, + SCI_TASK_FAILURE = SCI_FAILURE, + SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, + SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + + SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS + +}; + +/** + * sci_swab32_cpy - convert between scsi and scu-hardware byte format + * @dest: receive the 4-byte endian swapped version of src + * @src: word aligned source buffer + * + * scu hardware handles SSP/SMP control, response, and unidentified + * frames in "big endian dword" order. Regardless of host endian this + * is always a swab32()-per-dword conversion of the standard definition, + * i.e. single byte fields swapped and multi-byte fields in little- + * endian + */ +static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) +{ + u32 *dest = _dest, *src = _src; + + while (--word_cnt >= 0) + dest[word_cnt] = swab32(src[word_cnt]); +} + +extern unsigned char no_outbound_task_to; +extern u16 ssp_max_occ_to; +extern u16 stp_max_occ_to; +extern u16 ssp_inactive_to; +extern u16 stp_inactive_to; +extern unsigned char phy_gen; +extern unsigned char max_concurr_spinup; + +irqreturn_t isci_msix_isr(int vec, void *data); +irqreturn_t isci_intx_isr(int vec, void *data); +irqreturn_t isci_error_isr(int vec, void *data); + +/* + * Each timer is associated with a cancellation flag that is set when + * del_timer() is called and checked in the timer callback function. This + * is needed since del_timer_sync() cannot be called with sci_lock held. + * For deinit however, del_timer_sync() is used without holding the lock. + */ +struct sci_timer { + struct timer_list timer; + bool cancel; +}; + +static inline +void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long)) +{ + tmr->timer.function = fn; + tmr->timer.data = (unsigned long) tmr; + tmr->cancel = 0; + init_timer(&tmr->timer); +} + +static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) +{ + tmr->cancel = 0; + mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); +} + +static inline void sci_del_timer(struct sci_timer *tmr) +{ + tmr->cancel = 1; + del_timer(&tmr->timer); +} + +struct sci_base_state_machine { + const struct sci_base_state *state_table; + u32 initial_state_id; + u32 current_state_id; + u32 previous_state_id; +}; + +typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); + +struct sci_base_state { + sci_state_transition_t enter_state; /* Called on state entry */ + sci_state_transition_t exit_state; /* Called on state exit */ +}; + +extern void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, + u32 initial_state); +extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); +#endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c new file mode 100644 index 000000000000..79313a7a2356 --- /dev/null +++ b/drivers/scsi/isci/phy.c @@ -0,0 +1,1312 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "host.h" +#include "phy.h" +#include "scu_event_codes.h" +#include "probe_roms.h" + +/* Maximum arbitration wait time in micro-seconds */ +#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) + +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) +{ + return iphy->max_negotiated_speed; +} + +static enum sci_status +sci_phy_transport_layer_initialization(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *reg) +{ + u32 tl_control; + + iphy->transport_layer_registers = reg; + + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &iphy->transport_layer_registers->stp_rni); + + /* + * Hardware team recommends that we enable the STP prefetch for all + * transports + */ + tl_control = readl(&iphy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + writel(tl_control, &iphy->transport_layer_registers->control); + + return SCI_SUCCESS; +} + +static enum sci_status +sci_phy_link_layer_initialization(struct isci_phy *iphy, + struct scu_link_layer_registers __iomem *reg) +{ + struct isci_host *ihost = iphy->owning_port->owning_controller; + int phy_idx = iphy->phy_index; + struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &ihost->oem_parameters.phys[phy_idx]; + u32 phy_configuration; + struct sci_phy_cap phy_cap; + u32 parity_check = 0; + u32 parity_count = 0; + u32 llctl, link_rate; + u32 clksm_value = 0; + + iphy->link_layer_registers = reg; + + /* Set our IDENTIFY frame data */ + #define SCI_END_DEVICE 0x01 + + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &iphy->link_layer_registers->transmit_identification); + + /* Write the device SAS Address */ + writel(0xFEDCBA98, + &iphy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); + + /* Write the source SAS Address */ + writel(phy_oem->sas_address.high, + &iphy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &iphy->link_layer_registers->source_sas_address_low); + + /* Clear and Set the PHY Identifier */ + writel(0, &iphy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &iphy->link_layer_registers->identify_frame_phy_id); + + /* Change the initial state of the phy configuration register */ + phy_configuration = + readl(&iphy->link_layer_registers->phy_configuration); + + /* Hold OOB state machine in reset */ + phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration, + &iphy->link_layer_registers->phy_configuration); + + /* Configure the SNW capabilities */ + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; + if (ihost->oem_parameters.controller.do_enable_ssc == true) { + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; + } + + /* + * The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. */ + parity_check = phy_cap.all; + while (parity_check != 0) { + if (parity_check & 0x1) + parity_count++; + parity_check >>= 1; + } + + /* + * If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. */ + if ((parity_count % 2) != 0) + phy_cap.parity = 1; + + writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); + + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &iphy->link_layer_registers->notify_enable_spinup_control); + + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ + clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, + phy_user->in_connection_align_insertion_frequency); + + clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, + phy_user->align_insertion_frequency); + + writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); + + /* @todo Provide a way to write this register correctly */ + writel(0x02108421, + &iphy->link_layer_registers->afe_lookup_table_control); + + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)ihost->user_parameters.no_outbound_task_timeout); + + switch (phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + writel(llctl, &iphy->link_layer_registers->link_layer_control); + + if (is_a2(ihost->pdev)) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + } + + /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ + writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); + + /* We can exit the initial state to the stopped state */ + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + + return SCI_SUCCESS; +} + +static void phy_sata_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer); + struct isci_host *ihost = iphy->owning_port->owning_controller; + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + dev_dbg(sciphy_to_dev(iphy), + "%s: SCIC SDS Phy 0x%p did not receive signature fis before " + "timeout.\n", + __func__, + iphy); + + sci_change_state(&iphy->sm, SCI_PHY_STARTING); +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/** + * This method returns the port currently containing this phy. If the phy is + * currently contained by the dummy port, then the phy is considered to not + * be part of a port. + * @sci_phy: This parameter specifies the phy for which to retrieve the + * containing port. + * + * This method returns a handle to a port that contains the supplied phy. + * NULL This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !NULL All other + * values indicate a handle/pointer to the port containing the phy. + */ +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy) +{ + struct isci_port *iport = iphy->owning_port; + + if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT) + return NULL; + + return iphy->owning_port; +} + +/** + * This method will assign a port to the phy object. + * @out]: iphy This parameter specifies the phy for which to assign a port + * object. + * + * + */ +void sci_phy_set_port( + struct isci_phy *iphy, + struct isci_port *iport) +{ + iphy->owning_port = iport; + + if (iphy->bcn_received_while_port_unassigned) { + iphy->bcn_received_while_port_unassigned = false; + sci_port_broadcast_change_received(iphy->owning_port, iphy); + } +} + +enum sci_status sci_phy_initialize(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *tl, + struct scu_link_layer_registers __iomem *ll) +{ + /* Perfrom the initialization of the TL hardware */ + sci_phy_transport_layer_initialization(iphy, tl); + + /* Perofrm the initialization of the PE hardware */ + sci_phy_link_layer_initialization(iphy, ll); + + /* There is nothing that needs to be done in this state just + * transition to the stopped state + */ + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This method assigns the direct attached device ID for this phy. + * + * @iphy The phy for which the direct attached device id is to + * be assigned. + * @device_id The direct attached device ID to assign to the phy. + * This will either be the RNi for the device or an invalid RNi if there + * is no current device assigned to the phy. + */ +void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id) +{ + u32 tl_control; + + writel(device_id, &iphy->transport_layer_registers->stp_rni); + + /* + * The read should guarantee that the first write gets posted + * before the next write + */ + tl_control = readl(&iphy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + writel(tl_control, &iphy->transport_layer_registers->control); +} + +static void sci_phy_suspend(struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +void sci_phy_resume(struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); +} + +void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) +{ + sas->high = readl(&iphy->link_layer_registers->source_sas_address_high); + sas->low = readl(&iphy->link_layer_registers->source_sas_address_low); +} + +void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) +{ + struct sas_identify_frame *iaf; + + iaf = &iphy->frame_rcvd.iaf; + memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE); +} + +void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto) +{ + proto->all = readl(&iphy->link_layer_registers->transmit_identification); +} + +enum sci_status sci_phy_start(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + if (state != SCI_PHY_STOPPED) { + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_stop(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_OSSP_EN: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: + case SCI_PHY_READY: + break; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_reset(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + if (state != SCI_PHY_READY) { + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_RESETTING); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_AWAIT_SAS_POWER: { + u32 enable_spinup; + + enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control); + + /* Change state to the final state this substate machine has run to completion */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); + + return SCI_SUCCESS; + } + case SCI_PHY_SUB_AWAIT_SATA_POWER: { + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Change state to the final state this substate machine has run to completion */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN); + + return SCI_SUCCESS; + } + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +static void sci_phy_start_sas_link_training(struct isci_phy *iphy) +{ + /* continue the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + */ + u32 phy_control; + + phy_control = readl(&iphy->link_layer_registers->phy_configuration); + phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); + writel(phy_control, + &iphy->link_layer_registers->phy_configuration); + + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); + + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; +} + +static void sci_phy_start_sata_link_training(struct isci_phy *iphy) +{ + /* This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); + + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; +} + +/** + * sci_phy_complete_link_training - perform processing common to + * all protocols upon completion of link training. + * @sci_phy: This parameter specifies the phy object for which link training + * has completed. + * @max_link_rate: This parameter specifies the maximum link rate to be + * associated with this phy. + * @next_state: This parameter specifies the next state for the phy's starting + * sub-state machine. + * + */ +static void sci_phy_complete_link_training(struct isci_phy *iphy, + enum sas_linkrate max_link_rate, + u32 next_state) +{ + iphy->max_negotiated_speed = max_link_rate; + + sci_change_state(&iphy->sm, next_state); +} + +enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_AWAIT_OSSP_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + sci_phy_start_sas_link_training(iphy); + iphy->is_in_link_training = true; + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + sci_phy_start_sata_link_training(iphy); + iphy->is_in_link_training = true; + break; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + sci_phy_start_sata_link_training(iphy); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + break; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_IAF_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + sci_phy_start_sas_link_training(iphy); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* We were doing SAS PHY link training and received a + * SATA PHY event continue OOB/SN as if this were a + * SATA PHY + */ + sci_phy_start_sata_link_training(iphy); + break; + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SAS_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are + * expected while in this state + */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + sci_phy_start_sas_link_training(iphy); + break; + + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ + break; + case SCU_EVENT_SATA_PHY_DETECTED: + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + sci_phy_start_sas_link_training(iphy); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + return SCI_FAILURE;; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + sci_phy_start_sas_link_training(iphy); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + } + + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_READY: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (phy_get_non_dummy_port(iphy) != NULL) + sci_port_broadcast_change_received(iphy->owning_port, iphy); + else + iphy->bcn_received_while_port_unassigned = true; + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, iphy, event_code); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + case SCI_PHY_RESETTING: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, iphy, event_code); + + return SCI_FAILURE_INVALID_STATE; + break; + } + return SCI_SUCCESS; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + struct isci_host *ihost = iphy->owning_port->owning_controller; + enum sci_status result; + unsigned long flags; + + switch (state) { + case SCI_PHY_SUB_AWAIT_IAF_UF: { + u32 *frame_words; + struct sas_identify_frame iaf; + + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCI_PHY_SUB_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCI_PHY_SUB_AWAIT_SAS_POWER; + } + sci_change_state(&iphy->sm, state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + sci_controller_release_frame(ihost, frame_index); + return result; + } + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; + + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&fis_frame_data); + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + sci_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + /* Regardless of the result we are done with this frame with it */ + sci_controller_release_frame(ihost, frame_index); + + return result; + } + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + +} + +static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* This is just an temporary state go off to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); +} + +static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_insert(ihost, iphy); +} + +static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_remove(ihost, iphy); +} + +static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_insert(ihost, iphy); +} + +static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_remove(ihost, iphy); +} + +static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + if (sci_port_link_detected(iphy->owning_port, iphy)) { + + /* + * Clear the PE suspend condition so we can actually + * receive SIG FIS + * The hardware will not respond to the XRDY until the PE + * suspend condition is cleared. + */ + sci_phy_resume(iphy); + + sci_mod_timer(&iphy->sata_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + } else + iphy->is_in_link_training = false; +} + +static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* State machine has run to completion so exit out and change + * the base state machine to the ready state + */ + sci_change_state(&iphy->sm, SCI_PHY_READY); +} + +/** + * + * @sci_phy: This is the struct isci_phy object to stop. + * + * This method will stop the struct isci_phy object. This does not reset the + * protocol engine it just suspends it and places it in a state where it will + * not cause the end device to power up. none + */ +static void scu_link_layer_stop_protocol_engine( + struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + u32 enable_spinup_value; + + /* Suspend the protocol engine and place it in a sata spinup hold state */ + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= + (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | + SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Disable the notify enable spinup primitives */ + enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control); +} + +/** + * + * + * This method will start the OOB/SN state machine for this struct isci_phy object. + */ +static void scu_link_layer_start_oob( + struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); +} + +/** + * + * + * This method will transmit a hard reset request on the specified phy. The SCU + * hardware requires that we reset the OOB state machine and set the hard reset + * bit in the phy configuration register. We then must start OOB over with the + * hard reset bit set. + */ +static void scu_link_layer_tx_hard_reset( + struct isci_phy *iphy) +{ + u32 phy_configuration_value; + + /* + * SAS Phys must wait for the HARD_RESET_TX event notification to transition + * to the starting state. */ + phy_configuration_value = + readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration_value |= + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + writel(phy_configuration_value, + &iphy->link_layer_registers->phy_configuration); + + /* Now take the OOB state machine out of reset */ + phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration_value, + &iphy->link_layer_registers->phy_configuration); +} + +static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + /* + * @todo We need to get to the controller to place this PE in a + * reset state + */ + sci_del_timer(&iphy->sata_timer); + + scu_link_layer_stop_protocol_engine(iphy); + + if (iphy->sm.previous_state_id != SCI_PHY_INITIAL) + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); +} + +static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + scu_link_layer_stop_protocol_engine(iphy); + scu_link_layer_start_oob(iphy); + + /* We don't know what kind of phy we are going to be just yet */ + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->bcn_received_while_port_unassigned = false; + + if (iphy->sm.previous_state_id == SCI_PHY_READY) + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); + + sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL); +} + +static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy); +} + +static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_phy_suspend(iphy); +} + +static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* The phy is being reset, therefore deactivate it from the port. In + * the resetting state we don't notify the user regarding link up and + * link down notifications + */ + sci_port_deactivate_phy(iphy->owning_port, iphy, false); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(iphy); + } else { + /* The SCU does not need to have a discrete reset state so + * just go back to the starting state. + */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + } +} + +static const struct sci_base_state sci_phy_state_table[] = { + [SCI_PHY_INITIAL] = { }, + [SCI_PHY_STOPPED] = { + .enter_state = sci_phy_stopped_state_enter, + }, + [SCI_PHY_STARTING] = { + .enter_state = sci_phy_starting_state_enter, + }, + [SCI_PHY_SUB_INITIAL] = { + .enter_state = sci_phy_starting_initial_substate_enter, + }, + [SCI_PHY_SUB_AWAIT_OSSP_EN] = { }, + [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { }, + [SCI_PHY_SUB_AWAIT_IAF_UF] = { }, + [SCI_PHY_SUB_AWAIT_SAS_POWER] = { + .enter_state = sci_phy_starting_await_sas_power_substate_enter, + .exit_state = sci_phy_starting_await_sas_power_substate_exit, + }, + [SCI_PHY_SUB_AWAIT_SATA_POWER] = { + .enter_state = sci_phy_starting_await_sata_power_substate_enter, + .exit_state = sci_phy_starting_await_sata_power_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = { + .enter_state = sci_phy_starting_await_sata_phy_substate_enter, + .exit_state = sci_phy_starting_await_sata_phy_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = { + .enter_state = sci_phy_starting_await_sata_speed_substate_enter, + .exit_state = sci_phy_starting_await_sata_speed_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = { + .enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = sci_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCI_PHY_SUB_FINAL] = { + .enter_state = sci_phy_starting_final_substate_enter, + }, + [SCI_PHY_READY] = { + .enter_state = sci_phy_ready_state_enter, + .exit_state = sci_phy_ready_state_exit, + }, + [SCI_PHY_RESETTING] = { + .enter_state = sci_phy_resetting_state_enter, + }, + [SCI_PHY_FINAL] = { }, +}; + +void sci_phy_construct(struct isci_phy *iphy, + struct isci_port *iport, u8 phy_index) +{ + sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL); + + /* Copy the rest of the input data to our locals */ + iphy->owning_port = iport; + iphy->phy_index = phy_index; + iphy->bcn_received_while_port_unassigned = false; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->link_layer_registers = NULL; + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_init_timer(&iphy->sata_timer, phy_sata_timeout); +} + +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) +{ + struct sci_oem_params *oem = &ihost->oem_parameters; + u64 sci_sas_addr; + __be64 sas_addr; + + sci_sas_addr = oem->phys[index].sas_address.high; + sci_sas_addr <<= 32; + sci_sas_addr |= oem->phys[index].sas_address.low; + sas_addr = cpu_to_be64(sci_sas_addr); + memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); + + iphy->isci_port = NULL; + iphy->sas_phy.enabled = 0; + iphy->sas_phy.id = index; + iphy->sas_phy.sas_addr = &iphy->sas_addr[0]; + iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd; + iphy->sas_phy.ha = &ihost->sas_ha; + iphy->sas_phy.lldd_phy = iphy; + iphy->sas_phy.enabled = 1; + iphy->sas_phy.class = SAS; + iphy->sas_phy.iproto = SAS_PROTOCOL_ALL; + iphy->sas_phy.tproto = 0; + iphy->sas_phy.type = PHY_TYPE_PHYSICAL; + iphy->sas_phy.role = PHY_ROLE_INITIATOR; + iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED; + iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; + memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd)); +} + + +/** + * isci_phy_control() - This function is one of the SAS Domain Template + * functions. This is a phy management function. + * @phy: This parameter specifies the sphy being controlled. + * @func: This parameter specifies the phy control function being invoked. + * @buf: This parameter is specific to the phy function being invoked. + * + * status, zero indicates success. + */ +int isci_phy_control(struct asd_sas_phy *sas_phy, + enum phy_func func, + void *buf) +{ + int ret = 0; + struct isci_phy *iphy = sas_phy->lldd_phy; + struct isci_port *iport = iphy->isci_port; + struct isci_host *ihost = sas_phy->ha->lldd_ha; + unsigned long flags; + + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", + __func__, sas_phy, func, buf, iphy, iport); + + switch (func) { + case PHY_FUNC_DISABLE: + spin_lock_irqsave(&ihost->scic_lock, flags); + sci_phy_stop(iphy); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + + case PHY_FUNC_LINK_RESET: + spin_lock_irqsave(&ihost->scic_lock, flags); + sci_phy_stop(iphy); + sci_phy_start(iphy); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + + case PHY_FUNC_HARD_RESET: + if (!iport) + return -ENODEV; + + /* Perform the port reset. */ + ret = isci_port_perform_hard_reset(ihost, iport, iphy); + + break; + + default: + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d NOT IMPLEMENTED!\n", + __func__, sas_phy, func); + ret = -ENOSYS; + break; + } + return ret; +} diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h new file mode 100644 index 000000000000..67699c8e321c --- /dev/null +++ b/drivers/scsi/isci/phy.h @@ -0,0 +1,504 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PHY_H_ +#define _ISCI_PHY_H_ + +#include <scsi/sas.h> +#include <scsi/libsas.h> +#include "isci.h" +#include "sas.h" + +/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/* This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +enum sci_phy_protocol { + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + SCIC_SDS_PHY_PROTOCOL_SAS, + SCIC_SDS_PHY_PROTOCOL_SATA, + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * isci_phy - hba local phy infrastructure + * @sm: + * @protocol: attached device protocol + * @phy_index: physical index relative to the controller (0-3) + * @bcn_received_while_port_unassigned: bcn to report after port association + * @sata_timer: timeout SATA signature FIS arrival + */ +struct isci_phy { + struct sci_base_state_machine sm; + struct isci_port *owning_port; + enum sas_linkrate max_negotiated_speed; + enum sci_phy_protocol protocol; + u8 phy_index; + bool bcn_received_while_port_unassigned; + bool is_in_link_training; + struct sci_timer sata_timer; + struct scu_transport_layer_registers __iomem *transport_layer_registers; + struct scu_link_layer_registers __iomem *link_layer_registers; + struct asd_sas_phy sas_phy; + struct isci_port *isci_port; + u8 sas_addr[SAS_ADDR_SIZE]; + union { + struct sas_identify_frame iaf; + struct dev_to_host_fis fis; + } frame_rcvd; +}; + +static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy) +{ + struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy); + + return iphy; +} + +struct sci_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + +/* this data structure reflects the link layer transmit identification reg */ +struct sci_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + +/** + * struct sci_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct sci_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to NULL + * if the phy is not currently contained in a port. + */ + struct isci_port *iport; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sas_linkrate negotiated_link_rate; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; +}; + +/** + * struct sci_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct sci_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sas_identify_frame rcvd_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct sci_phy_cap rcvd_cap; + +}; + +/** + * struct sci_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct sci_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct dev_to_host_fis signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum sci_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum sci_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + +enum sci_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_PHY_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STARTING, + + /** + * Initial state + */ + SCI_PHY_SUB_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCI_PHY_SUB_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCI_PHY_SUB_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCI_PHY_SUB_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCI_PHY_SUB_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCI_PHY_SUB_FINAL, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_PHY_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_PHY_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_PHY_FINAL, +}; + +void sci_phy_construct( + struct isci_phy *iphy, + struct isci_port *iport, + u8 phy_index); + +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy); + +void sci_phy_set_port( + struct isci_phy *iphy, + struct isci_port *iport); + +enum sci_status sci_phy_initialize( + struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); + +enum sci_status sci_phy_start( + struct isci_phy *iphy); + +enum sci_status sci_phy_stop( + struct isci_phy *iphy); + +enum sci_status sci_phy_reset( + struct isci_phy *iphy); + +void sci_phy_resume( + struct isci_phy *iphy); + +void sci_phy_setup_transport( + struct isci_phy *iphy, + u32 device_id); + +enum sci_status sci_phy_event_handler( + struct isci_phy *iphy, + u32 event_code); + +enum sci_status sci_phy_frame_handler( + struct isci_phy *iphy, + u32 frame_index); + +enum sci_status sci_phy_consume_power_handler( + struct isci_phy *iphy); + +void sci_phy_get_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +void sci_phy_get_attached_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +struct sci_phy_proto; +void sci_phy_get_protocols( + struct isci_phy *iphy, + struct sci_phy_proto *protocols); +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy); + +struct isci_host; +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); +int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); + +#endif /* !defined(_ISCI_PHY_H_) */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c new file mode 100644 index 000000000000..8f6f9b77e41a --- /dev/null +++ b/drivers/scsi/isci/port.c @@ -0,0 +1,1757 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "port.h" +#include "request.h" + +#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) +#define SCU_DUMMY_INDEX (0xFFFF) + +static void isci_port_change_state(struct isci_port *iport, enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&iport->isci_host->pdev->dev, + "%s: iport = %p, state = 0x%x\n", + __func__, iport, status); + + /* XXX pointless lock */ + spin_lock_irqsave(&iport->state_lock, flags); + iport->status = status; + spin_unlock_irqrestore(&iport->state_lock, flags); +} + +static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto) +{ + u8 index; + + proto->all = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct isci_phy *iphy = iport->phy_table[index]; + + if (!iphy) + continue; + sci_phy_get_protocols(iphy, proto); + } +} + +static u32 sci_port_get_phys(struct isci_port *iport) +{ + u32 index; + u32 mask; + + mask = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) + mask |= (1 << index); + + return mask; +} + +/** + * sci_port_get_properties() - This method simply returns the properties + * regarding the port, such as: physical index, protocols, sas address, etc. + * @port: this parameter specifies the port for which to retrieve the physical + * index. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * Indicate if the user specified a valid port. SCI_SUCCESS This value is + * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This + * value is returned if the specified port is not valid. When this value is + * returned, no data is copied to the properties output parameter. + */ +static enum sci_status sci_port_get_properties(struct isci_port *iport, + struct sci_port_properties *prop) +{ + if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) + return SCI_FAILURE_INVALID_PORT; + + prop->index = iport->logical_port_index; + prop->phy_mask = sci_port_get_phys(iport); + sci_port_get_sas_address(iport, &prop->local.sas_address); + sci_port_get_protocols(iport, &prop->local.protocols); + sci_port_get_attached_sas_address(iport, &prop->remote.sas_address); + + return SCI_SUCCESS; +} + +static void sci_port_bcn_enable(struct isci_port *iport) +{ + struct isci_phy *iphy; + u32 val; + int i; + + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + iphy = iport->phy_table[i]; + if (!iphy) + continue; + val = readl(&iphy->link_layer_registers->link_layer_control); + /* clear the bit by writing 1. */ + writel(val, &iphy->link_layer_registers->link_layer_control); + } +} + +/* called under sci_lock to stabilize phy:port associations */ +void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) +{ + int i; + + clear_bit(IPORT_BCN_BLOCKED, &iport->flags); + wake_up(&ihost->eventq); + + if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags)) + return; + + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + struct isci_phy *iphy = iport->phy_table[i]; + + if (!iphy) + continue; + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + break; + } +} + +static void isci_port_bc_change_received(struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy) +{ + if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { + dev_dbg(&ihost->pdev->dev, + "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + set_bit(IPORT_BCN_PENDING, &iport->flags); + atomic_inc(&iport->event); + wake_up(&ihost->eventq); + } else { + dev_dbg(&ihost->pdev->dev, + "%s: isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + } + sci_port_bcn_enable(iport); +} + +static void isci_port_link_up(struct isci_host *isci_host, + struct isci_port *iport, + struct isci_phy *iphy) +{ + unsigned long flags; + struct sci_port_properties properties; + unsigned long success = true; + + BUG_ON(iphy->isci_port != NULL); + + iphy->isci_port = iport; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", + __func__, iport); + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + + isci_port_change_state(iphy->isci_port, isci_starting); + + sci_port_get_properties(iport, &properties); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + u64 attached_sas_address; + + iphy->sas_phy.oob_mode = SATA_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); + + /* + * For direct-attached SATA devices, the SCI core will + * automagically assign a SAS address to the end device + * for the purpose of creating a port. This SAS address + * will not be the same as assigned to the PHY and needs + * to be obtained from struct sci_port_properties properties. + */ + attached_sas_address = properties.remote.sas_address.high; + attached_sas_address <<= 32; + attached_sas_address |= properties.remote.sas_address.low; + swab64s(&attached_sas_address); + + memcpy(&iphy->sas_phy.attached_sas_addr, + &attached_sas_address, sizeof(attached_sas_address)); + } else if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + iphy->sas_phy.oob_mode = SAS_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); + + /* Copy the attached SAS address from the IAF */ + memcpy(iphy->sas_phy.attached_sas_addr, + iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); + } else { + dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); + success = false; + } + + iphy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(iphy); + + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + + /* Notify libsas that we have an address frame, if indeed + * we've found an SSP, SMP, or STP target */ + if (success) + isci_host->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BYTES_DMAED); +} + + +/** + * isci_port_link_down() - This function is called by the sci core when a link + * becomes inactive. + * @isci_host: This parameter specifies the isci host object. + * @phy: This parameter specifies the isci phy with the active link. + * @port: This parameter specifies the isci port with the active link. + * + */ +static void isci_port_link_down(struct isci_host *isci_host, + struct isci_phy *isci_phy, + struct isci_port *isci_port) +{ + struct isci_remote_device *isci_device; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + if (isci_port) { + + /* check to see if this is the last phy on this port. */ + if (isci_phy->sas_phy.port && + isci_phy->sas_phy.port->num_phys == 1) { + atomic_inc(&isci_port->event); + isci_port_bcn_enable(isci_host, isci_port); + + /* change the state for all devices on this port. The + * next task sent to this device will be returned as + * SAS_TASK_UNDELIVERED, and the scsi mid layer will + * remove the target + */ + list_for_each_entry(isci_device, + &isci_port->remote_dev_list, + node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + set_bit(IDEV_GONE, &isci_device->flags); + } + } + isci_port_change_state(isci_port, isci_stopping); + } + + /* Notify libsas of the borken link, this will trigger calls to our + * isci_port_deformed and isci_dev_gone functions. + */ + sas_phy_disconnected(&isci_phy->sas_phy); + isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy, + PHYE_LOSS_OF_SIGNAL); + + isci_phy->isci_port = NULL; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p - Done\n", __func__, isci_port); +} + + +/** + * isci_port_ready() - This function is called by the sci core when a link + * becomes ready. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + complete_all(&isci_port->start_complete); + isci_port_change_state(isci_port, isci_ready); + return; +} + +/** + * isci_port_not_ready() - This function is called by the sci core when a link + * is not ready. All remote devices on this link will be removed if they are + * in the stopping state. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); +} + +static void isci_port_stop_complete(struct isci_host *ihost, + struct isci_port *iport, + enum sci_status completion_status) +{ + dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); +} + +/** + * isci_port_hard_reset_complete() - This function is called by the sci core + * when the hard reset complete notification has been received. + * @port: This parameter specifies the sci port with the active link. + * @completion_status: This parameter specifies the core status for the reset + * process. + * + */ +static void isci_port_hard_reset_complete(struct isci_port *isci_port, + enum sci_status completion_status) +{ + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p, completion_status=%x\n", + __func__, isci_port, completion_status); + + /* Save the status of the hard reset from the port. */ + isci_port->hard_reset_status = completion_status; + + complete_all(&isci_port->hard_reset_complete); +} + +/* This method will return a true value if the specified phy can be assigned to + * this port The following is a list of phys for each port that are allowed: - + * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method + * doesn't preclude all configurations. It merely ensures that a phy is part + * of the allowable set of phy identifiers for that port. For example, one + * could assign phy 3 to port 0 and no other phys. Please refer to + * sci_port_is_phy_mask_valid() for information regarding whether the + * phy_mask for a port can be supported. bool true if this is a valid phy + * assignment for the port false if this is not a valid phy assignment for the + * port + */ +bool sci_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index) +{ + struct isci_host *ihost = iport->owning_controller; + struct sci_user_parameters *user = &ihost->user_parameters; + + /* Initialize to invalid value. */ + u32 existing_phy_index = SCI_MAX_PHYS; + u32 index; + + if ((iport->physical_port_index == 1) && (phy_index != 1)) + return false; + + if (iport->physical_port_index == 3 && phy_index != 3) + return false; + + if (iport->physical_port_index == 2 && + (phy_index == 0 || phy_index == 1)) + return false; + + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index] && index != phy_index) + existing_phy_index = index; + + /* Ensure that all of the phys in the port are capable of + * operating at the same maximum link rate. + */ + if (existing_phy_index < SCI_MAX_PHYS && + user->phys[phy_index].max_speed_generation != + user->phys[existing_phy_index].max_speed_generation) + return false; + + return true; +} + +/** + * + * @sci_port: This is the port object for which to determine if the phy mask + * can be supported. + * + * This method will return a true value if the port's phy mask can be supported + * by the SCU. The following is a list of valid PHY mask configurations for + * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2] + * - Port 3 - [3] This method returns a boolean indication specifying if the + * phy mask can be supported. true if this is a valid phy assignment for the + * port false if this is not a valid phy assignment for the port + */ +static bool sci_port_is_phy_mask_valid( + struct isci_port *iport, + u32 phy_mask) +{ + if (iport->physical_port_index == 0) { + if (((phy_mask & 0x0F) == 0x0F) + || ((phy_mask & 0x03) == 0x03) + || ((phy_mask & 0x01) == 0x01) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 1) { + if (((phy_mask & 0x02) == 0x02) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 2) { + if (((phy_mask & 0x0C) == 0x0C) + || ((phy_mask & 0x04) == 0x04) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 3) { + if (((phy_mask & 0x08) == 0x08) + || (phy_mask == 0)) + return true; + } + + return false; +} + +/* + * This method retrieves a currently active (i.e. connected) phy contained in + * the port. Currently, the lowest order phy that is connected is returned. + * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is + * returned if there are no currently active (i.e. connected to a remote end + * point) phys contained in the port. All other values specify a struct sci_phy + * object that is active in the port. + */ +static struct isci_phy *sci_port_get_a_connected_phy(struct isci_port *iport) +{ + u32 index; + struct isci_phy *iphy; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Ensure that the phy is both part of the port and currently + * connected to the remote end-point. + */ + iphy = iport->phy_table[index]; + if (iphy && sci_port_active_phy(iport, iphy)) + return iphy; + } + + return NULL; +} + +static enum sci_status sci_port_set_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + /* Check to see if we can add this phy to a port + * that means that the phy is not part of a port and that the port does + * not already have a phy assinged to the phy index. + */ + if (!iport->phy_table[iphy->phy_index] && + !phy_get_non_dummy_port(iphy) && + sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + /* Phy is being added in the stopped state so we are in MPC mode + * make logical port index = physical port index + */ + iport->logical_port_index = iport->physical_port_index; + iport->phy_table[iphy->phy_index] = iphy; + sci_phy_set_port(iphy, iport); + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +static enum sci_status sci_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + /* Make sure that this phy is part of this port */ + if (iport->phy_table[iphy->phy_index] == iphy && + phy_get_non_dummy_port(iphy) == iport) { + struct isci_host *ihost = iport->owning_controller; + + /* Yep it is assigned to this port so remove it */ + sci_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); + iport->phy_table[iphy->phy_index] = NULL; + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +void sci_port_get_sas_address(struct isci_port *iport, struct sci_sas_address *sas) +{ + u32 index; + + sas->high = 0; + sas->low = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) + sci_phy_get_sas_address(iport->phy_table[index], sas); +} + +void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_address *sas) +{ + struct isci_phy *iphy; + + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. + */ + iphy = sci_port_get_a_connected_phy(iport); + if (iphy) { + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { + sci_phy_get_attached_sas_address(iphy, sas); + } else { + sci_phy_get_sas_address(iphy, sas); + sas->low += iphy->phy_index; + } + } else { + sas->high = 0; + sas->low = 0; + } +} + +/** + * sci_port_construct_dummy_rnc() - create dummy rnc for si workaround + * + * @sci_port: logical port on which we need to create the remote node context + * @rni: remote node index for this remote node context. + * + * This routine will construct a dummy remote node context data structure + * This structure will be posted to the hardware to work around a scheduler + * error in the hardware. + */ +static void sci_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) +{ + union scu_remote_node_context *rnc; + + rnc = &iport->owning_controller->remote_node_context_table[rni]; + + memset(rnc, 0, sizeof(union scu_remote_node_context)); + + rnc->ssp.remote_sas_address_hi = 0; + rnc->ssp.remote_sas_address_lo = 0; + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = 1; + rnc->ssp.logical_port_index = iport->physical_port_index; + + rnc->ssp.nexus_loss_timer_enable = false; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = true; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + rnc->ssp.arbitration_wait_time = 0; +} + +/* + * construct a dummy task context data structure. This + * structure will be posted to the hardwre to work around a scheduler error + * in the hardware. + */ +static void sci_port_construct_dummy_task(struct isci_port *iport, u16 tag) +{ + struct isci_host *ihost = iport->owning_controller; + struct scu_task_context *task_context; + + task_context = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + memset(task_context, 0, sizeof(struct scu_task_context)); + + task_context->initiator_request = 1; + task_context->connection_rate = 1; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->task_index = ISCI_TAG_TCI(tag); + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + task_context->remote_node_index = iport->reserved_rni; + task_context->do_not_dma_ssp_good_response = 1; + task_context->task_phase = 0x01; +} + +static void sci_port_destroy_dummy_resources(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + + if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) + isci_free_tag(ihost, iport->reserved_tag); + + if (iport->reserved_rni != SCU_DUMMY_INDEX) + sci_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes, + 1, iport->reserved_rni); + + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; +} + +void sci_port_setup_transports(struct isci_port *iport, u32 device_id) +{ + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->active_phy_mask & (1 << index)) + sci_phy_setup_transport(iport->phy_table[index], device_id); + } +} + +static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) +{ + struct isci_host *ihost = iport->owning_controller; + + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + sci_phy_resume(iphy); + + iport->active_phy_mask |= 1 << iphy->phy_index; + + sci_controller_clear_invalid_phy(ihost, iphy); + + if (do_notify_user == true) + isci_port_link_up(ihost, iport, iphy); +} + +void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) +{ + struct isci_host *ihost = iport->owning_controller; + + iport->active_phy_mask &= ~(1 << iphy->phy_index); + + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + + /* Re-assign the phy back to the LP as if it were a narrow port */ + writel(iphy->phy_index, + &iport->port_pe_configuration_register[iphy->phy_index]); + + if (do_notify_user == true) + isci_port_link_down(ihost, iphy, iport); +} + +static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy) +{ + struct isci_host *ihost = iport->owning_controller; + + /* + * Check to see if we have alreay reported this link as bad and if + * not go ahead and tell the SCI_USER that we have discovered an + * invalid link. + */ + if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { + ihost->invalid_phy_mask |= 1 << iphy->phy_index; + dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); + } +} + +static bool is_port_ready_state(enum sci_port_states state) +{ + switch (state) { + case SCI_PORT_READY: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + return true; + default: + return false; + } +} + +/* flag dummy rnc hanling when exiting a ready state */ +static void port_state_machine_change(struct isci_port *iport, + enum sci_port_states state) +{ + struct sci_base_state_machine *sm = &iport->sm; + enum sci_port_states old_state = sm->current_state_id; + + if (is_port_ready_state(old_state) && !is_port_ready_state(state)) + iport->ready_exit = true; + + sci_change_state(sm, state); + iport->ready_exit = false; +} + +/** + * sci_port_general_link_up_handler - phy can be assigned to port? + * @sci_port: sci_port object for which has a phy that has gone link up. + * @sci_phy: This is the struct isci_phy object that has gone link up. + * @do_notify_user: This parameter specifies whether to inform the user (via + * sci_port_link_up()) as to the fact that a new phy as become ready. + * + * Determine if this phy can be assigned to this + * port . If the phy is not a valid PHY for + * this port then the function will notify the user. A PHY can only be + * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in + * the same port. none + */ +static void sci_port_general_link_up_handler(struct isci_port *iport, + struct isci_phy *iphy, + bool do_notify_user) +{ + struct sci_sas_address port_sas_address; + struct sci_sas_address phy_sas_address; + + sci_port_get_attached_sas_address(iport, &port_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_sas_address); + + /* If the SAS address of the new phy matches the SAS address of + * other phys in the port OR this is the first phy in the port, + * then activate the phy and allow it to be used for operations + * in this port. + */ + if ((phy_sas_address.high == port_sas_address.high && + phy_sas_address.low == port_sas_address.low) || + iport->active_phy_mask == 0) { + struct sci_base_state_machine *sm = &iport->sm; + + sci_port_activate_phy(iport, iphy, do_notify_user); + if (sm->current_state_id == SCI_PORT_RESETTING) + port_state_machine_change(iport, SCI_PORT_READY); + } else + sci_port_invalid_link_up(iport, iphy); +} + + + +/** + * This method returns false if the port only has a single phy object assigned. + * If there are no phys or more than one phy then the method will return + * true. + * @sci_port: The port for which the wide port condition is to be checked. + * + * bool true Is returned if this is a wide ported port. false Is returned if + * this is a narrow port. + */ +static bool sci_port_is_wide(struct isci_port *iport) +{ + u32 index; + u32 phy_count = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->phy_table[index] != NULL) { + phy_count++; + } + } + + return phy_count != 1; +} + +/** + * This method is called by the PHY object when the link is detected. if the + * port wants the PHY to continue on to the link up state then the port + * layer must return true. If the port object returns false the phy object + * must halt its attempt to go link up. + * @sci_port: The port associated with the phy object. + * @sci_phy: The phy object that is trying to go link up. + * + * true if the phy object can continue to the link up condition. true Is + * returned if this phy can continue to the ready state. false Is returned if + * can not continue on to the ready state. This notification is in place for + * wide ports and direct attached phys. Since there are no wide ported SATA + * devices this could become an invalid port configuration. + */ +bool sci_port_link_detected( + struct isci_port *iport, + struct isci_phy *iphy) +{ + if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && + (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && + sci_port_is_wide(iport)) { + sci_port_invalid_link_up(iport, iphy); + + return false; + } + + return true; +} + +static void port_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_port *iport = container_of(tmr, typeof(*iport), timer); + struct isci_host *ihost = iport->owning_controller; + unsigned long flags; + u32 current_state; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + current_state = iport->sm.current_state_id; + + if (current_state == SCI_PORT_RESETTING) { + /* if the port is still in the resetting state then the timeout + * fired before the reset completed. + */ + port_state_machine_change(iport, SCI_PORT_FAILED); + } else if (current_state == SCI_PORT_STOPPED) { + /* if the port is stopped then the start request failed In this + * case stay in the stopped state. + */ + dev_err(sciport_to_dev(iport), + "%s: SCIC Port 0x%p failed to stop before tiemout.\n", + __func__, + iport); + } else if (current_state == SCI_PORT_STOPPING) { + /* if the port is still stopping then the stop has not completed */ + isci_port_stop_complete(iport->owning_controller, + iport, + SCI_FAILURE_TIMEOUT); + } else { + /* The port is in the ready state and we have a timer + * reporting a timeout this should not happen. + */ + dev_err(sciport_to_dev(iport), + "%s: SCIC Port 0x%p is processing a timeout operation " + "in state %d.\n", __func__, iport, current_state); + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/* --------------------------------------------------------------------------- */ + +/** + * This function updates the hardwares VIIT entry for this port. + * + * + */ +static void sci_port_update_viit_entry(struct isci_port *iport) +{ + struct sci_sas_address sas_address; + + sci_port_get_sas_address(iport, &sas_address); + + writel(sas_address.high, + &iport->viit_registers->initiator_sas_address_hi); + writel(sas_address.low, + &iport->viit_registers->initiator_sas_address_lo); + + /* This value get cleared just in case its not already cleared */ + writel(0, &iport->viit_registers->reserved); + + /* We are required to update the status register last */ + writel(SCU_VIIT_ENTRY_ID_VIIT | + SCU_VIIT_IPPT_INITIATOR | + ((1 << iport->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + SCU_VIIT_STATUS_ALL_VALID, + &iport->viit_registers->status); +} + +enum sas_linkrate sci_port_get_max_allowed_speed(struct isci_port *iport) +{ + u16 index; + struct isci_phy *iphy; + enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; + + /* + * Loop through all of the phys in this port and find the phy with the + * lowest maximum link rate. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + iphy = iport->phy_table[index]; + if (iphy && sci_port_active_phy(iport, iphy) && + iphy->max_negotiated_speed < max_allowed_speed) + max_allowed_speed = iphy->max_negotiated_speed; + } + + return max_allowed_speed; +} + +static void sci_port_suspend_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +/** + * sci_port_post_dummy_request() - post dummy/workaround request + * @sci_port: port to post task + * + * Prevent the hardware scheduler from posting new requests to the front + * of the scheduler queue causing a starvation problem for currently + * ongoing requests. + * + */ +static void sci_port_post_dummy_request(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u16 tag = iport->reserved_tag; + struct scu_task_context *tc; + u32 command; + + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + tc->abort = 0; + + command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + ISCI_TAG_TCI(tag); + + sci_controller_post_request(ihost, command); +} + +/** + * This routine will abort the dummy request. This will alow the hardware to + * power down parts of the silicon to save power. + * + * @sci_port: The port on which the task must be aborted. + * + */ +static void sci_port_abort_dummy_request(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u16 tag = iport->reserved_tag; + struct scu_task_context *tc; + u32 command; + + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + tc->abort = 1; + + command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + ISCI_TAG_TCI(tag); + + sci_controller_post_request(ihost, command); +} + +/** + * + * @sci_port: This is the struct isci_port object to resume. + * + * This method will resume the port task scheduler for this port object. none + */ +static void +sci_port_resume_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_port_suspend_port_task_scheduler(iport); + + iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + + if (iport->active_phy_mask != 0) { + /* At least one of the phys on the port is ready */ + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + } +} + +static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) +{ + u32 index; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + isci_port_ready(ihost, iport); + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->phy_table[index]) { + writel(iport->physical_port_index, + &iport->port_pe_configuration_register[ + iport->phy_table[index]->phy_index]); + } + } + + sci_port_update_viit_entry(iport); + + sci_port_resume_port_task_scheduler(iport); + + /* + * Post the dummy task for the port so the hardware can schedule + * io correctly + */ + sci_port_post_dummy_request(iport); +} + +static void sci_port_invalidate_dummy_remote_node(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u8 phys_index = iport->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = iport->reserved_rni; + u32 command; + + rnc = &ihost->remote_node_context_table[rni]; + + rnc->ssp.is_valid = false; + + /* ensure the preceding tc abort request has reached the + * controller and give it ample time to act before posting the rnc + * invalidate + */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); +} + +/** + * + * @object: This is the object which is cast to a struct isci_port object. + * + * This method will perform the actions required by the struct isci_port on + * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void sci_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + /* + * Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + sci_port_abort_dummy_request(iport); + + isci_port_not_ready(ihost, iport); + + if (iport->ready_exit) + sci_port_invalidate_dummy_remote_node(iport); +} + +static void sci_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + if (iport->active_phy_mask == 0) { + isci_port_not_ready(ihost, iport); + + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); + } else if (iport->started_request_count == 0) + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); +} + +static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_port_suspend_port_task_scheduler(iport); + if (iport->ready_exit) + sci_port_invalidate_dummy_remote_node(iport); +} + +enum sci_status sci_port_start(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + enum sci_status status = SCI_SUCCESS; + enum sci_port_states state; + u32 phy_mask; + + state = iport->sm.current_state_id; + if (state != SCI_PORT_STOPPED) { + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + if (iport->assigned_device_count > 0) { + /* TODO This is a start failure operation because + * there are still devices assigned to this port. + * There must be no devices assigned to a port on a + * start operation. + */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + if (iport->reserved_rni == SCU_DUMMY_INDEX) { + u16 rni = sci_remote_node_table_allocate_remote_node( + &ihost->available_remote_nodes, 1); + + if (rni != SCU_DUMMY_INDEX) + sci_port_construct_dummy_rnc(iport, rni); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + iport->reserved_rni = rni; + } + + if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + u16 tag; + + tag = isci_alloc_tag(ihost); + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + else + sci_port_construct_dummy_task(iport, tag); + iport->reserved_tag = tag; + } + + if (status == SCI_SUCCESS) { + phy_mask = sci_port_get_phys(iport); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. + */ + if (sci_port_is_phy_mask_valid(iport, phy_mask) == true) { + port_state_machine_change(iport, + SCI_PORT_READY); + + return SCI_SUCCESS; + } + status = SCI_FAILURE; + } + + if (status != SCI_SUCCESS) + sci_port_destroy_dummy_resources(iport); + + return status; +} + +enum sci_status sci_port_stop(struct isci_port *iport) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: + return SCI_SUCCESS; + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + case SCI_PORT_RESETTING: + port_state_machine_change(iport, + SCI_PORT_STOPPING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_PHY; + struct isci_phy *iphy = NULL; + enum sci_port_states state; + u32 phy_index; + + state = iport->sm.current_state_id; + if (state != SCI_PORT_SUB_OPERATIONAL) { + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + /* Select a phy on which we can send the hard reset request. */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) { + iphy = iport->phy_table[phy_index]; + if (iphy && !sci_port_active_phy(iport, iphy)) { + /* + * We found a phy but it is not ready select + * different phy + */ + iphy = NULL; + } + } + + /* If we have a phy then go ahead and start the reset procedure */ + if (!iphy) + return status; + status = sci_phy_reset(iphy); + + if (status != SCI_SUCCESS) + return status; + + sci_mod_timer(&iport->timer, timeout); + iport->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + + port_state_machine_change(iport, SCI_PORT_RESETTING); + return SCI_SUCCESS; +} + +/** + * sci_port_add_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will add a PHY to the selected port. This method returns an + * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other + * status is a failure to add the phy to the port. + */ +enum sci_status sci_port_add_phy(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_status status; + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: { + struct sci_sas_address port_sas_address; + + /* Read the port assigned SAS Address if there is one */ + sci_port_get_sas_address(iport, &port_sas_address); + + if (port_sas_address.high != 0 && port_sas_address.low != 0) { + struct sci_sas_address phy_sas_address; + + /* Make sure that the PHY SAS Address matches the SAS Address + * for this port + */ + sci_phy_get_sas_address(iphy, &phy_sas_address); + + if (port_sas_address.high != phy_sas_address.high || + port_sas_address.low != phy_sas_address.low) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + return sci_port_set_phy(iport, iphy); + } + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + status = sci_port_set_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + + sci_port_general_link_up_handler(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); + + return status; + case SCI_PORT_SUB_CONFIGURING: + status = sci_port_set_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + sci_port_general_link_up_handler(iport, iphy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port. + */ + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * sci_port_remove_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will remove the PHY from the selected PORT. This method returns + * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any + * other status is a failure to add the phy to the port. + */ +enum sci_status sci_port_remove_phy(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_status status; + enum sci_port_states state; + + state = iport->sm.current_state_id; + + switch (state) { + case SCI_PORT_STOPPED: + return sci_port_clear_phy(iport, iphy); + case SCI_PORT_SUB_OPERATIONAL: + status = sci_port_clear_phy(iport, iphy); + if (status != SCI_SUCCESS) + return status; + + sci_port_deactivate_phy(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + case SCI_PORT_SUB_CONFIGURING: + status = sci_port_clear_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + sci_port_deactivate_phy(iport, iphy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port + */ + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_link_up(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_WAITING: + /* Since this is the first phy going link up for the port we + * can just enable it and continue + */ + sci_port_activate_phy(iport, iphy, true); + + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + return SCI_SUCCESS; + case SCI_PORT_SUB_OPERATIONAL: + sci_port_general_link_up_handler(iport, iphy, true); + return SCI_SUCCESS; + case SCI_PORT_RESETTING: + /* TODO We should make sure that the phy that has gone + * link up is the same one on which we sent the reset. It is + * possible that the phy on which we sent the reset is not the + * one that has gone link up and we want to make sure that + * phy being reset comes back. Consider the case where a + * reset is sent but before the hardware processes the reset it + * get a link up on the port because of a hot plug event. + * because of the reset request this phy will go link down + * almost immediately. + */ + + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. + */ + sci_port_general_link_up_handler(iport, iphy, false); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_link_down(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_OPERATIONAL: + sci_port_deactivate_phy(iport, iphy, true); + + /* If there are no active phys left in the port, then + * transition the port to the WAITING state until such time + * as a phy goes link up + */ + if (iport->active_phy_mask == 0) + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); + return SCI_SUCCESS; + case SCI_PORT_RESETTING: + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + sci_port_deactivate_phy(iport, iphy, false); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_start_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_WAITING: + return SCI_FAILURE_INVALID_STATE; + case SCI_PORT_SUB_OPERATIONAL: + iport->started_request_count++; + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_complete_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_PORT_STOPPING: + sci_port_decrement_request_count(iport); + + if (iport->started_request_count == 0) + port_state_machine_change(iport, + SCI_PORT_STOPPED); + break; + case SCI_PORT_READY: + case SCI_PORT_RESETTING: + case SCI_PORT_FAILED: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + sci_port_decrement_request_count(iport); + break; + case SCI_PORT_SUB_CONFIGURING: + sci_port_decrement_request_count(iport); + if (iport->started_request_count == 0) { + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + } + break; + } + return SCI_SUCCESS; +} + +static void sci_port_enable_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + /* enable the port task scheduler in a suspended state */ + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_disable_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value &= + ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_post_dummy_remote_node(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u8 phys_index = iport->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = iport->reserved_rni; + u32 command; + + rnc = &ihost->remote_node_context_table[rni]; + rnc->ssp.is_valid = true; + + command = SCU_CONTEXT_COMMAND_POST_RNC_32 | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); + + /* ensure hardware has seen the post rnc command and give it + * ample time to act before sending the suspend + */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); +} + +static void sci_port_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + if (iport->sm.previous_state_id == SCI_PORT_STOPPING) { + /* + * If we enter this state becasuse of a request to stop + * the port then we want to disable the hardwares port + * task scheduler. */ + sci_port_disable_port_task_scheduler(iport); + } +} + +static void sci_port_stopped_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + /* Enable and suspend the port task scheduler */ + sci_port_enable_port_task_scheduler(iport); +} + +static void sci_port_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + u32 prev_state; + + prev_state = iport->sm.previous_state_id; + if (prev_state == SCI_PORT_RESETTING) + isci_port_hard_reset_complete(iport, SCI_SUCCESS); + else + isci_port_not_ready(ihost, iport); + + /* Post and suspend the dummy remote node context for this port. */ + sci_port_post_dummy_remote_node(iport); + + /* Start the ready substate machine */ + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); +} + +static void sci_port_resetting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_del_timer(&iport->timer); +} + +static void sci_port_stopping_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_del_timer(&iport->timer); + + sci_port_destroy_dummy_resources(iport); +} + +static void sci_port_failed_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state sci_port_state_table[] = { + [SCI_PORT_STOPPED] = { + .enter_state = sci_port_stopped_state_enter, + .exit_state = sci_port_stopped_state_exit + }, + [SCI_PORT_STOPPING] = { + .exit_state = sci_port_stopping_state_exit + }, + [SCI_PORT_READY] = { + .enter_state = sci_port_ready_state_enter, + }, + [SCI_PORT_SUB_WAITING] = { + .enter_state = sci_port_ready_substate_waiting_enter, + }, + [SCI_PORT_SUB_OPERATIONAL] = { + .enter_state = sci_port_ready_substate_operational_enter, + .exit_state = sci_port_ready_substate_operational_exit + }, + [SCI_PORT_SUB_CONFIGURING] = { + .enter_state = sci_port_ready_substate_configuring_enter, + .exit_state = sci_port_ready_substate_configuring_exit + }, + [SCI_PORT_RESETTING] = { + .exit_state = sci_port_resetting_state_exit + }, + [SCI_PORT_FAILED] = { + .enter_state = sci_port_failed_state_enter, + } +}; + +void sci_port_construct(struct isci_port *iport, u8 index, + struct isci_host *ihost) +{ + sci_init_sm(&iport->sm, sci_port_state_table, SCI_PORT_STOPPED); + + iport->logical_port_index = SCIC_SDS_DUMMY_PORT; + iport->physical_port_index = index; + iport->active_phy_mask = 0; + iport->ready_exit = false; + + iport->owning_controller = ihost; + + iport->started_request_count = 0; + iport->assigned_device_count = 0; + + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; + + sci_init_timer(&iport->timer, port_timeout); + + iport->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) + iport->phy_table[index] = NULL; +} + +void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) +{ + INIT_LIST_HEAD(&iport->remote_dev_list); + INIT_LIST_HEAD(&iport->domain_dev_list); + spin_lock_init(&iport->state_lock); + init_completion(&iport->start_complete); + iport->isci_host = ihost; + isci_port_change_state(iport, isci_freed); + atomic_set(&iport->event, 0); +} + +/** + * isci_port_get_state() - This function gets the status of the port object. + * @isci_port: This parameter points to the isci_port object + * + * status of the object as a isci_status enum. + */ +enum isci_status isci_port_get_state( + struct isci_port *isci_port) +{ + return isci_port->status; +} + +void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy) +{ + struct isci_host *ihost = iport->owning_controller; + + /* notify the user. */ + isci_port_bc_change_received(ihost, iport, iphy); +} + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + unsigned long flags; + enum sci_status status; + int idx, ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", + __func__, iport); + + init_completion(&iport->hard_reset_complete); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT + status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == SCI_SUCCESS) { + wait_for_completion(&iport->hard_reset_complete); + + dev_dbg(&ihost->pdev->dev, + "%s: iport = %p; hard reset completion\n", + __func__, iport); + + if (iport->hard_reset_status != SCI_SUCCESS) + ret = TMF_RESP_FUNC_FAILED; + } else { + ret = TMF_RESP_FUNC_FAILED; + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; sci_port_hard_reset call" + " failed 0x%x\n", + __func__, iport, status); + + } + + /* If the hard reset for the port has failed, consider this + * the same as link failures on all phys in the port. + */ + if (ret != TMF_RESP_FUNC_COMPLETE) { + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; hard reset failed " + "(0x%x) - driving explicit link fail for all phys\n", + __func__, iport, iport->hard_reset_status); + + /* Down all phys in the port. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + for (idx = 0; idx < SCI_MAX_PHYS; ++idx) { + struct isci_phy *iphy = iport->phy_table[idx]; + + if (!iphy) + continue; + sci_phy_stop(iphy); + sci_phy_start(iphy); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + return ret; +} + +/** + * isci_port_deformed() - This function is called by libsas when a port becomes + * inactive. + * @phy: This parameter specifies the libsas phy with the inactive port. + * + */ +void isci_port_deformed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p\n", __func__, phy); +} + +/** + * isci_port_formed() - This function is called by libsas when a port becomes + * active. + * @phy: This parameter specifies the libsas phy with the active port. + * + */ +void isci_port_formed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); +} diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h new file mode 100644 index 000000000000..b50ecd4e8f9c --- /dev/null +++ b/drivers/scsi/isci/port.h @@ -0,0 +1,306 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_PORT_H_ +#define _ISCI_PORT_H_ + +#include <scsi/libsas.h> +#include "isci.h" +#include "sas.h" +#include "phy.h" + +#define SCIC_SDS_DUMMY_PORT 0xFF + +struct isci_phy; +struct isci_host; + +enum isci_status { + isci_freed = 0x00, + isci_starting = 0x01, + isci_ready = 0x02, + isci_ready_for_io = 0x03, + isci_stopping = 0x04, + isci_stopped = 0x05, +}; + +/** + * struct isci_port - isci direct attached sas port object + * @event: counts bcns and port stop events (for bcn filtering) + * @ready_exit: several states constitute 'ready'. When exiting ready we + * need to take extra port-teardown actions that are + * skipped when exiting to another 'ready' state. + * @logical_port_index: software port index + * @physical_port_index: hardware port index + * @active_phy_mask: identifies phy members + * @reserved_tag: + * @reserved_rni: reserver for port task scheduler workaround + * @started_request_count: reference count for outstanding commands + * @not_ready_reason: set during state transitions and notified + * @timer: timeout start/stop operations + */ +struct isci_port { + enum isci_status status; + #define IPORT_BCN_BLOCKED 0 + #define IPORT_BCN_PENDING 1 + unsigned long flags; + atomic_t event; + struct isci_host *isci_host; + struct asd_sas_port sas_port; + struct list_head remote_dev_list; + spinlock_t state_lock; + struct list_head domain_dev_list; + struct completion start_complete; + struct completion hard_reset_complete; + enum sci_status hard_reset_status; + struct sci_base_state_machine sm; + bool ready_exit; + u8 logical_port_index; + u8 physical_port_index; + u8 active_phy_mask; + u16 reserved_rni; + u16 reserved_tag; + u32 started_request_count; + u32 assigned_device_count; + u32 not_ready_reason; + struct isci_phy *phy_table[SCI_MAX_PHYS]; + struct isci_host *owning_controller; + struct sci_timer timer; + struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; + /* XXX rework: only one register, no need to replicate per-port */ + u32 __iomem *port_pe_configuration_register; + struct scu_viit_entry __iomem *viit_registers; +}; + +enum sci_port_not_ready_reason_code { + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, + SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, + SCIC_PORT_NOT_READY_RECONFIGURING, + + SCIC_PORT_NOT_READY_REASON_CODE_MAX +}; + +struct sci_port_end_point_properties { + struct sci_sas_address sas_address; + struct sci_phy_proto protocols; +}; + +struct sci_port_properties { + u32 index; + struct sci_port_end_point_properties local; + struct sci_port_end_point_properties remote; + u32 phy_mask; +}; + +/** + * enum sci_port_states - This enumeration depicts all the states for the + * common port state machine. + * + * + */ +enum sci_port_states { + /** + * This state indicates that the port has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_PORT_STOPPED, + + /** + * This state indicates that the port is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_PORT_STOPPING, + + /** + * This state indicates the port is now ready. Thus, the user is + * able to perform IO operations on this port. + * This state is entered from the STARTING state. + */ + SCI_PORT_READY, + + /** + * The substate where the port is started and ready but has no + * active phys. + */ + SCI_PORT_SUB_WAITING, + + /** + * The substate where the port is started and ready and there is + * at least one phy operational. + */ + SCI_PORT_SUB_OPERATIONAL, + + /** + * The substate where the port is started and there was an + * add/remove phy event. This state is only used in Automatic + * Port Configuration Mode (APC) + */ + SCI_PORT_SUB_CONFIGURING, + + /** + * This state indicates the port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO operations on this + * port. + * This state is entered from the READY state. + */ + SCI_PORT_RESETTING, + + /** + * This state indicates the port has failed a reset request. This state + * is entered when a port reset request times out. + * This state is entered from the RESETTING state. + */ + SCI_PORT_FAILED, + + +}; + +static inline void sci_port_decrement_request_count(struct isci_port *iport) +{ + if (WARN_ONCE(iport->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + iport->started_request_count--; +} + +#define sci_port_active_phy(port, phy) \ + (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) + +void sci_port_construct( + struct isci_port *iport, + u8 port_index, + struct isci_host *ihost); + +enum sci_status sci_port_start(struct isci_port *iport); +enum sci_status sci_port_stop(struct isci_port *iport); + +enum sci_status sci_port_add_phy( + struct isci_port *iport, + struct isci_phy *iphy); + +enum sci_status sci_port_remove_phy( + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_port_setup_transports( + struct isci_port *iport, + u32 device_id); + +void isci_port_bcn_enable(struct isci_host *, struct isci_port *); + +void sci_port_deactivate_phy( + struct isci_port *iport, + struct isci_phy *iphy, + bool do_notify_user); + +bool sci_port_link_detected( + struct isci_port *iport, + struct isci_phy *iphy); + +enum sci_status sci_port_link_up(struct isci_port *iport, + struct isci_phy *iphy); +enum sci_status sci_port_link_down(struct isci_port *iport, + struct isci_phy *iphy); + +struct isci_request; +struct isci_remote_device; +enum sci_status sci_port_start_io( + struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_port_complete_io( + struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sas_linkrate sci_port_get_max_allowed_speed( + struct isci_port *iport); + +void sci_port_broadcast_change_received( + struct isci_port *iport, + struct isci_phy *iphy); + +bool sci_port_is_valid_phy_assignment( + struct isci_port *iport, + u32 phy_index); + +void sci_port_get_sas_address( + struct isci_port *iport, + struct sci_sas_address *sas_address); + +void sci_port_get_attached_sas_address( + struct isci_port *iport, + struct sci_sas_address *sas_address); + +enum isci_status isci_port_get_state( + struct isci_port *isci_port); + +void isci_port_formed(struct asd_sas_phy *); +void isci_port_deformed(struct asd_sas_phy *); + +void isci_port_init( + struct isci_port *port, + struct isci_host *host, + int index); + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy); +#endif /* !defined(_ISCI_PORT_H_) */ diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c new file mode 100644 index 000000000000..486b113c634a --- /dev/null +++ b/drivers/scsi/isci/port_config.c @@ -0,0 +1,754 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" + +#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) + +enum SCIC_SDS_APC_ACTIVITY { + SCIC_SDS_APC_SKIP_PHY, + SCIC_SDS_APC_ADD_PHY, + SCIC_SDS_APC_START_TIMER, + + SCIC_SDS_APC_ACTIVITY_MAX +}; + +/* + * ****************************************************************************** + * General port configuration agent routines + * ****************************************************************************** */ + +/** + * + * @address_one: A SAS Address to be compared. + * @address_two: A SAS Address to be compared. + * + * Compare the two SAS Address and if SAS Address One is greater than SAS + * Address Two then return > 0 else if SAS Address One is less than SAS Address + * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 + * > y where x is returned for Address One > Address Two y is returned for + * Address One < Address Two 0 is returned ofr Address One = Address Two + */ +static s32 sci_sas_address_compare( + struct sci_sas_address address_one, + struct sci_sas_address address_two) +{ + if (address_one.high > address_two.high) { + return 1; + } else if (address_one.high < address_two.high) { + return -1; + } else if (address_one.low > address_two.low) { + return 1; + } else if (address_one.low < address_two.low) { + return -1; + } + + /* The two SAS Address must be identical */ + return 0; +} + +/** + * + * @controller: The controller object used for the port search. + * @phy: The phy object to match. + * + * This routine will find a matching port for the phy. This means that the + * port and phy both have the same broadcast sas address and same received sas + * address. The port address or the NULL if there is no matching + * port. port address if the port can be found to match the phy. + * NULL if there is no matching port for the phy. + */ +static struct isci_port *sci_port_configuration_agent_find_port( + struct isci_host *ihost, + struct isci_phy *iphy) +{ + u8 i; + struct sci_sas_address port_sas_address; + struct sci_sas_address port_attached_device_address; + struct sci_sas_address phy_sas_address; + struct sci_sas_address phy_attached_device_address; + + /* + * Since this phy can be a member of a wide port check to see if one or + * more phys match the sent and received SAS address as this phy in which + * case it should participate in the same port. + */ + sci_phy_get_sas_address(iphy, &phy_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address); + + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + + sci_port_get_sas_address(iport, &port_sas_address); + sci_port_get_attached_sas_address(iport, &port_attached_device_address); + + if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && + sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + return iport; + } + + return NULL; +} + +/** + * + * @controller: This is the controller object that contains the port agent + * @port_agent: This is the port configruation agent for the controller. + * + * This routine will validate the port configuration is correct for the SCU + * hardware. The SCU hardware allows for port configurations as follows. LP0 + * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, + * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for + * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * the port configuration is not valid for this port configuration agent. + */ +static enum sci_status sci_port_configuration_agent_validate_ports( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + struct sci_sas_address first_address; + struct sci_sas_address second_address; + + /* + * Sanity check the max ranges for all the phys the max index + * is always equal to the port range index */ + if (port_agent->phy_valid_port_range[0].max_index != 0 || + port_agent->phy_valid_port_range[1].max_index != 1 || + port_agent->phy_valid_port_range[2].max_index != 2 || + port_agent->phy_valid_port_range[3].max_index != 3) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + + /* + * This is a request to configure a single x4 port or at least attempt + * to make all the phys into a single port */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 0 && + port_agent->phy_valid_port_range[2].min_index == 0 && + port_agent->phy_valid_port_range[3].min_index == 0) + return SCI_SUCCESS; + + /* + * This is a degenerate case where phy 1 and phy 2 are assigned + * to the same port this is explicitly disallowed by the hardware + * unless they are part of the same x4 port and this condition was + * already checked above. */ + if (port_agent->phy_valid_port_range[2].min_index == 1) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE3 can never have the same SAS Address unless they + * are part of the same x4 wide port and we have already checked + * for this condition. */ + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE1 are configured into a 2x1 ports make sure that the + * SAS Address for PE0 and PE2 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 1) { + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[2], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + /* + * PE2 and PE3 are configured into a 2x1 ports make sure that the + * SAS Address for PE1 and PE3 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[2].min_index == 2 && + port_agent->phy_valid_port_range[3].min_index == 3) { + sci_phy_get_sas_address(&ihost->phys[1], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * Manual port configuration agent routines + * ****************************************************************************** */ + +/* verify all of the phys in the same port are using the same SAS address */ +static enum sci_status +sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u32 phy_mask; + u32 assigned_phy_mask; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + u8 port_index; + u8 phy_index; + + assigned_phy_mask = 0; + sas_address.high = 0; + sas_address.low = 0; + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + phy_mask = ihost->oem_parameters.ports[port_index].phy_mask; + + if (!phy_mask) + continue; + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + break; + } + + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + sci_port_add_phy(&ihost->ports[port_index], + &ihost->phys[phy_index]); + + assigned_phy_mask |= (1 << phy_index); + } + + phy_index++; + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void mpc_agent_timeout(unsigned long data) +{ + u8 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + /* Find the mask of phys that are reported read but as yet unconfigured into a port */ + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct isci_phy *iphy = &ihost->phys[index]; + + if (configure_phy_mask & (1 << index)) { + port_agent->link_up_handler(ihost, port_agent, + phy_get_non_dummy_port(iphy), + iphy); + } + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static void sci_mpc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + /* If the port is NULL then the phy was not assigned to a port. + * This is because the phy was not given the same SAS Address as + * the other PHYs in the port. + */ + if (!iport) + return; + + port_agent->phy_ready_mask |= (1 << iphy->phy_index); + sci_port_link_up(iport, iphy); + if ((iport->active_phy_mask & (1 << iphy->phy_index))) + port_agent->phy_configured_mask |= (1 << iphy->phy_index); +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. The port is an invalid + * handle only if the phy was never port of this port. This happens when + * the phy is not broadcasting the same SAS address as the other phys in the + * assigned port. + * @phy: This is the phy object which has gone link down. + * + * This function handles the manual port configuration link down notifications. + * Since all ports and phys are associated at initialization time we just turn + * around and notifiy the port object of the link down event. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link down notification from a phy that has no assocoated port? + */ +static void sci_mpc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + if (iport != NULL) { + /* + * If we can form a new port from the remainder of the phys + * then we want to start the timer to allow the SCI User to + * cleanup old devices and rediscover the port before + * rebuilding the port with the phys that remain in the ready + * state. + */ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + + /* + * Check to see if there are more phys waiting to be + * configured into a port. If there are allow the SCI User + * to tear down this port, if necessary, and then reconstruct + * the port after the timeout. + */ + if ((port_agent->phy_configured_mask == 0x0000) && + (port_agent->phy_ready_mask != 0x0000) && + !port_agent->timer_pending) { + port_agent->timer_pending = true; + + sci_mod_timer(&port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); + } + + sci_port_link_down(iport, iphy); + } +} + +/* verify phys are assigned a valid SAS address for automatic port + * configuration mode. + */ +static enum sci_status +sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u8 phy_index; + u8 port_index; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + + phy_index = 0; + + while (phy_index < SCI_MAX_PHYS) { + port_index = phy_index; + + /* Get the assigned SAS Address for the first PHY on the controller. */ + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + while (++phy_index < SCI_MAX_PHYS) { + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + /* Verify each of the SAS address are all the same for every PHY */ + if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + } else { + port_agent->phy_valid_port_range[phy_index].min_index = phy_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + break; + } + } + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void sci_apc_agent_configure_ports(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_phy *iphy, + bool start_timer) +{ + u8 port_index; + enum sci_status status; + struct isci_port *iport; + enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + + iport = sci_port_configuration_agent_find_port(ihost, iphy); + + if (iport) { + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) + apc_activity = SCIC_SDS_APC_ADD_PHY; + else + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } else { + /* + * There is no matching Port for this PHY so lets search through the + * Ports and see if we can add the PHY to its own port or maybe start + * the timer and wait to see if a wider port can be made. + * + * Note the break when we reach the condition of the port id == phy id */ + for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; + port_index++) { + + iport = &ihost->ports[port_index]; + + /* First we must make sure that this PHY can be added to this Port. */ + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + /* + * Port contains a PHY with a greater PHY ID than the current + * PHY that has gone link up. This phy can not be part of any + * port so skip it and move on. */ + if (iport->active_phy_mask > (1 << iphy->phy_index)) { + apc_activity = SCIC_SDS_APC_SKIP_PHY; + break; + } + + /* + * We have reached the end of our Port list and have not found + * any reason why we should not either add the PHY to the port + * or wait for more phys to become active. */ + if (iport->physical_port_index == iphy->phy_index) { + /* + * The Port either has no active PHYs. + * Consider that if the port had any active PHYs we would have + * or active PHYs with + * a lower PHY Id than this PHY. */ + if (apc_activity != SCIC_SDS_APC_START_TIMER) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + break; + } + + /* + * The current Port has no active PHYs and this PHY could be part + * of this Port. Since we dont know as yet setup to start the + * timer and see if there is a better configuration. */ + if (iport->active_phy_mask == 0) { + apc_activity = SCIC_SDS_APC_START_TIMER; + } + } else if (iport->active_phy_mask != 0) { + /* + * The Port has an active phy and the current Phy can not + * participate in this port so skip the PHY and see if + * there is a better configuration. */ + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } + } + } + + /* + * Check to see if the start timer operations should instead map to an + * add phy operation. This is caused because we have been waiting to + * add a phy to a port but could not becuase the automatic port + * configuration engine had a choice of possible ports for the phy. + * Since we have gone through a timeout we are going to restrict the + * choice to the smallest possible port. */ + if ( + (start_timer == false) + && (apc_activity == SCIC_SDS_APC_START_TIMER) + ) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + switch (apc_activity) { + case SCIC_SDS_APC_ADD_PHY: + status = sci_port_add_phy(iport, iphy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask |= (1 << iphy->phy_index); + } + break; + + case SCIC_SDS_APC_START_TIMER: + /* + * This can occur for either a link down event, or a link + * up event where we cannot yet tell the port to which a + * phy belongs. + */ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); + break; + + case SCIC_SDS_APC_SKIP_PHY: + default: + /* do nothing the PHY can not be made part of a port at this time. */ + break; + } +} + +/** + * sci_apc_agent_link_up - handle apc link up events + * @scic: This is the controller object that receives the link up + * notification. + * @sci_port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @sci_phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. Is it possible to get a link down notification from a phy + * that has no assocoated port? + */ +static void sci_apc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + u8 phy_index = iphy->phy_index; + + if (!iport) { + /* the phy is not the part of this port */ + port_agent->phy_ready_mask |= 1 << phy_index; + sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); + } else { + /* the phy is already the part of the port */ + u32 port_state = iport->sm.current_state_id; + + /* if the PORT'S state is resetting then the link up is from + * port hard reset in this case, we need to tell the port + * that link up is recieved + */ + BUG_ON(port_state != SCI_PORT_RESETTING); + port_agent->phy_ready_mask |= 1 << phy_index; + sci_port_link_up(iport, iphy); + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @iport: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @iphy: This is the phy object which has gone link down. + * + * This method handles the automatic port configuration link down + * notifications. not associated with a port there is no action taken. Is it + * possible to get a link down notification from a phy that has no assocoated + * port? + */ +static void sci_apc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + + if (!iport) + return; + if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { + enum sci_status status; + + status = sci_port_remove_phy(iport, iphy); + + if (status == SCI_SUCCESS) + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + } +} + +/* configure the phys into ports when the timer fires */ +static void apc_agent_timeout(unsigned long data) +{ + u32 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + if (!configure_phy_mask) + return; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((configure_phy_mask & (1 << index)) == 0) + continue; + + sci_apc_agent_configure_ports(ihost, port_agent, + &ihost->phys[index], false); + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/* + * ****************************************************************************** + * Public port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This method will construct the port configuration agent for operation. This + * call is universal for both manual port configuration and automatic port + * configuration modes. + */ +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent) +{ + u32 index; + + port_agent->phy_configured_mask = 0x00; + port_agent->phy_ready_mask = 0x00; + + port_agent->link_up_handler = NULL; + port_agent->link_down_handler = NULL; + + port_agent->timer_pending = false; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + port_agent->phy_valid_port_range[index].min_index = 0; + port_agent->phy_valid_port_range[index].max_index = 0; + } +} + +enum sci_status sci_port_configuration_agent_initialize( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + enum sci_status status; + enum sci_port_configuration_mode mode; + + mode = ihost->oem_parameters.controller.mode_type; + + if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + status = sci_mpc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_mpc_agent_link_up; + port_agent->link_down_handler = sci_mpc_agent_link_down; + + sci_init_timer(&port_agent->timer, mpc_agent_timeout); + } else { + status = sci_apc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_apc_agent_link_up; + port_agent->link_down_handler = sci_apc_agent_link_down; + + sci_init_timer(&port_agent->timer, apc_agent_timeout); + } + + return status; +} diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c new file mode 100644 index 000000000000..b5f4341de243 --- /dev/null +++ b/drivers/scsi/isci/probe_roms.c @@ -0,0 +1,243 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + */ + +/* probe_roms - scan for oem parameters */ + +#include <linux/kernel.h> +#include <linux/firmware.h> +#include <linux/uaccess.h> +#include <linux/efi.h> +#include <asm/probe_roms.h> + +#include "isci.h" +#include "task.h" +#include "probe_roms.h" + +static efi_char16_t isci_efivar_name[] = { + 'R', 's', 't', 'S', 'c', 'u', 'O' +}; + +struct isci_orom *isci_request_oprom(struct pci_dev *pdev) +{ + void __iomem *oprom = pci_map_biosrom(pdev); + struct isci_orom *rom = NULL; + size_t len, i; + int j; + char oem_sig[4]; + struct isci_oem_hdr oem_hdr; + u8 *tmp, sum; + + if (!oprom) + return NULL; + + len = pci_biosrom_size(pdev); + rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); + if (!rom) { + dev_warn(&pdev->dev, + "Unable to allocate memory for orom\n"); + return NULL; + } + + for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) { + memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE); + + /* we think we found the OEM table */ + if (memcmp(oem_sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) == 0) { + size_t copy_len; + + memcpy_fromio(&oem_hdr, oprom + i, sizeof(oem_hdr)); + + copy_len = min(oem_hdr.len - sizeof(oem_hdr), + sizeof(*rom)); + + memcpy_fromio(rom, + oprom + i + sizeof(oem_hdr), + copy_len); + + /* calculate checksum */ + tmp = (u8 *)&oem_hdr; + for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++) + sum += *tmp; + + tmp = (u8 *)rom; + for (j = 0; j < sizeof(*rom); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + continue; + } + + /* keep going if that's not the oem param table */ + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) + continue; + + dev_info(&pdev->dev, + "OEM parameter table found in OROM\n"); + break; + } + } + + if (i >= len) { + dev_err(&pdev->dev, "oprom parse error\n"); + devm_kfree(&pdev->dev, rom); + rom = NULL; + } + pci_unmap_biosrom(oprom); + + return rom; +} + +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, + struct isci_orom *orom, int scu_index) +{ + /* check for valid inputs */ + if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS || + scu_index > orom->hdr.num_elements || !oem) + return -EINVAL; + + *oem = orom->ctrl[scu_index]; + return 0; +} + +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw) +{ + struct isci_orom *orom = NULL, *data; + int i, j; + + if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0) + return NULL; + + if (fw->size < sizeof(*orom)) + goto out; + + data = (struct isci_orom *)fw->data; + + if (strncmp(ISCI_ROM_SIG, data->hdr.signature, + strlen(ISCI_ROM_SIG)) != 0) + goto out; + + orom = devm_kzalloc(&pdev->dev, fw->size, GFP_KERNEL); + if (!orom) + goto out; + + memcpy(orom, fw->data, fw->size); + + if (is_c0(pdev)) + goto out; + + /* + * deprecated: override default amp_control for pre-preproduction + * silicon revisions + */ + for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++) + for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) { + orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03; + } + out: + release_firmware(fw); + + return orom; +} + +static struct efi *get_efi(void) +{ +#ifdef CONFIG_EFI + return &efi; +#else + return NULL; +#endif +} + +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) +{ + efi_status_t status; + struct isci_orom *rom; + struct isci_oem_hdr *oem_hdr; + u8 *tmp, sum; + int j; + unsigned long data_len; + u8 *efi_data; + u32 efi_attrib = 0; + + data_len = 1024; + efi_data = devm_kzalloc(&pdev->dev, data_len, GFP_KERNEL); + if (!efi_data) { + dev_warn(&pdev->dev, + "Unable to allocate memory for EFI data\n"); + return NULL; + } + + rom = (struct isci_orom *)(efi_data + sizeof(struct isci_oem_hdr)); + + if (get_efi()) + status = get_efi()->get_variable(isci_efivar_name, + &ISCI_EFI_VENDOR_GUID, + &efi_attrib, + &data_len, + efi_data); + else + status = EFI_NOT_FOUND; + + if (status != EFI_SUCCESS) { + dev_warn(&pdev->dev, + "Unable to obtain EFI var data for OEM parms\n"); + return NULL; + } + + oem_hdr = (struct isci_oem_hdr *)efi_data; + + if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) { + dev_warn(&pdev->dev, + "Invalid OEM header signature\n"); + return NULL; + } + + /* calculate checksum */ + tmp = (u8 *)efi_data; + for (j = 0, sum = 0; j < (sizeof(*oem_hdr) + sizeof(*rom)); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + return NULL; + } + + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) { + dev_warn(&pdev->dev, + "Invalid OEM table signature\n"); + return NULL; + } + + return rom; +} diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h new file mode 100644 index 000000000000..dc007e692f4e --- /dev/null +++ b/drivers/scsi/isci/probe_roms.h @@ -0,0 +1,249 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PROBE_ROMS_H_ +#define _ISCI_PROBE_ROMS_H_ + +#ifdef __KERNEL__ +#include <linux/firmware.h> +#include <linux/pci.h> +#include <linux/efi.h> +#include "isci.h" + +#define SCIC_SDS_PARM_NO_SPEED 0 + +/* generation 1 (i.e. 1.5 Gb/s) */ +#define SCIC_SDS_PARM_GEN1_SPEED 1 + +/* generation 2 (i.e. 3.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN2_SPEED 2 + +/* generation 3 (i.e. 6.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN3_SPEED 3 +#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED + +/* parameters that can be set by module parameters */ +struct sci_user_parameters { + struct sci_phy_user_params { + /** + * This field specifies the NOTIFY (ENABLE SPIN UP) primitive + * insertion frequency for this phy index. + */ + u32 notify_enable_spin_up_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit a single ALIGN primitive. This value applies regardless + * of what type of device is attached or connection state. A value of + * 0 indicates that no ALIGN primitives will be inserted. + */ + u16 align_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit 2 ALIGN primitives. This applies for SAS connections + * only. A minimum value of 3 is required for this field. + */ + u16 in_connection_align_insertion_frequency; + + /** + * This field indicates the maximum speed generation to be utilized + * by phys in the supplied port. + * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). + * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). + * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). + */ + u8 max_speed_generation; + + } phys[SCI_MAX_PHYS]; + + /** + * This field specifies the maximum number of direct attached devices + * that can have power supplied to them simultaneously. + */ + u8 max_number_concurrent_device_spin_up; + + /** + * This field specifies the number of seconds to allow a phy to consume + * power before yielding to another phy. + * + */ + u8 phy_spin_up_delay_interval; + + /** + * These timer values specifies how long a link will remain open with no + * activity in increments of a microsecond, it can be in increments of + * 100 microseconds if the upper most bit is set. + * + */ + u16 stp_inactivity_timeout; + u16 ssp_inactivity_timeout; + + /** + * These timer values specifies how long a link will remain open in increments + * of 100 microseconds. + * + */ + u16 stp_max_occupancy_timeout; + u16 ssp_max_occupancy_timeout; + + /** + * This timer value specifies how long a link will remain open with no + * outbound traffic in increments of a microsecond. + * + */ + u8 no_outbound_task_timeout; + +}; + +#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 +#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF +#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 + +struct sci_oem_params; +int sci_oem_parameters_validate(struct sci_oem_params *oem); + +struct isci_orom; +struct isci_orom *isci_request_oprom(struct pci_dev *pdev); +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, + struct isci_orom *orom, int scu_index); +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); + +struct isci_oem_hdr { + u8 sig[4]; + u8 rev_major; + u8 rev_minor; + u16 len; + u8 checksum; + u8 reserved1; + u16 reserved2; +} __attribute__ ((packed)); + +#else +#define SCI_MAX_PORTS 4 +#define SCI_MAX_PHYS 4 +#define SCI_MAX_CONTROLLERS 2 +#endif + +#define ISCI_FW_NAME "isci/isci_firmware.bin" + +#define ROMSIGNATURE 0xaa55 + +#define ISCI_OEM_SIG "$OEM" +#define ISCI_OEM_SIG_SIZE 4 +#define ISCI_ROM_SIG "ISCUOEMB" +#define ISCI_ROM_SIG_SIZE 8 + +#define ISCI_EFI_VENDOR_GUID \ + EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ + 0x1a, 0x04, 0xc6) +#define ISCI_EFI_VAR_NAME "RstScuO" + +/* Allowed PORT configuration modes APC Automatic PORT configuration mode is + * defined by the OEM configuration parameters providing no PHY_MASK parameters + * for any PORT. i.e. There are no phys assigned to any of the ports at start. + * MPC Manual PORT configuration mode is defined by the OEM configuration + * parameters providing a PHY_MASK value for any PORT. It is assumed that any + * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. + * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs + * being assigned is sufficient to declare manual PORT configuration. + */ +enum sci_port_configuration_mode { + SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 +}; + +struct sci_bios_oem_param_block_hdr { + uint8_t signature[ISCI_ROM_SIG_SIZE]; + uint16_t total_block_length; + uint8_t hdr_length; + uint8_t version; + uint8_t preboot_source; + uint8_t num_elements; + uint16_t element_length; + uint8_t reserved[8]; +} __attribute__ ((packed)); + +struct sci_oem_params { + struct { + uint8_t mode_type; + uint8_t max_concurrent_dev_spin_up; + uint8_t do_enable_ssc; + uint8_t reserved; + } controller; + + struct { + uint8_t phy_mask; + } ports[SCI_MAX_PORTS]; + + struct sci_phy_oem_params { + struct { + uint32_t high; + uint32_t low; + } sas_address; + + uint32_t afe_tx_amp_control0; + uint32_t afe_tx_amp_control1; + uint32_t afe_tx_amp_control2; + uint32_t afe_tx_amp_control3; + } phys[SCI_MAX_PHYS]; +} __attribute__ ((packed)); + +struct isci_orom { + struct sci_bios_oem_param_block_hdr hdr; + struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS]; +} __attribute__ ((packed)); + +#endif diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h new file mode 100644 index 000000000000..9b266c7428e8 --- /dev/null +++ b/drivers/scsi/isci/registers.h @@ -0,0 +1,1934 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_REGISTERS_H_ +#define _SCU_REGISTERS_H_ + +/** + * This file contains the constants and structures for the SCU memory mapped + * registers. + * + * + */ + +#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_VIIT_ENTRY_ID_SHIFT (30) + +#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000) +#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20) + +#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800) +#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12) + +#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00) +#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8) + +#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_VIIT_ENTRY_STATUS_SHIFT (0) + +#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT) + +#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_INITIATOR \ + (\ + SCU_VIIT_IPPT_SSP_INITIATOR \ + | SCU_VIIT_IPPT_SMP_INITIATOR \ + | SCU_VIIT_IPPT_STP_INITIATOR \ + ) + +#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ALL_VALID \ + (\ + SCU_VIIT_STATUS_RNC_VALID \ + | SCU_VIIT_STATUS_ADDRESS_VALID \ + | SCU_VIIT_STATUS_RNI_VALID \ + ) + +#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) + +/** + * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry + * + * + */ +struct scu_viit_entry { + /** + * This must be encoded as to the type of initiator that is being constructed + * for this port. + */ + u32 status; + + /** + * Virtual initiator high SAS Address + */ + u32 initiator_sas_address_hi; + + /** + * Virtual initiator low SAS Address + */ + u32 initiator_sas_address_lo; + + /** + * This must be 0 + */ + u32 reserved; + +}; + + +/* IIT Status Defines */ +#define SCU_IIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_IIT_ENTRY_ID_SHIFT (30) + +#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000) +#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29) + +#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00) +#define SCU_IIT_ENTRY_LPI_SHIFT (8) + +#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_IIT_ENTRY_STATUS_SHIFT (0) + +/* IIT Remote Initiator Defines */ +#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF) +#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0) + +#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000) +#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16) + +#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT) + +/** + * struct scu_iit_entry - This will be implemented later when we support + * virtual functions + * + * + */ +struct scu_iit_entry { + u32 status; + u32 remote_initiator_sas_address_hi; + u32 remote_initiator_sas_address_lo; + u32 remote_initiator; + +}; + +/* Generate a value for an SCU register */ +#define SCU_GEN_VALUE(name, value) \ + (((value) << name ## _SHIFT) & (name ## _MASK)) + +/* + * Generate a bit value for an SCU register + * Make sure that the register MASK is just a single bit */ +#define SCU_GEN_BIT(name) \ + SCU_GEN_VALUE(name, ((u32)1)) + +#define SCU_SET_BIT(name, reg_value) \ + ((reg_value) | SCU_GEN_BIT(name)) + +#define SCU_CLEAR_BIT(name, reg_value) \ + ((reg_value)$ ~(SCU_GEN_BIT(name))) + +/* + * ***************************************************************************** + * Unions for bitfield definitions of SCU Registers + * SMU Post Context Port + * ***************************************************************************** */ +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0) +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000) +#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000) + +#define SMU_PCP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_ISR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name) + +#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR) +#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_IMR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name) + +#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR) +#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0) +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00) +#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0) + +#define SMU_ICC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0) +#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000) + +#define SMU_TCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value) + +#define SMU_TCR_GEN_BIT(name, value) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000) + +#define SMU_CQPR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value) + +#define SMU_CQPR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000) +#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000) + +#define SMU_CQGR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value) + +#define SMU_CQGR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name) + +#define SMU_CQGR_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(CYCLE_BIT) + +#define SMU_CQGR_EVENT_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT) + +#define SMU_CQGR_GET_POINTER_SET(value) \ + SMU_CQGR_GEN_VAL(POINTER, value) + + +/* ***************************************************************************** */ +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0) +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000) + +#define SMU_CQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value) + +#define SMU_CQC_QUEUE_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(QUEUE_LIMIT, value) + +#define SMU_CQC_EVENT_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(EVENT_LIMIT, value) + + +/* ***************************************************************************** */ +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000) +#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000) + +#define SMU_DCC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value) + +#define SMU_DCC_GET_MAX_PEG(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_LP(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_TC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_RNC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000) +#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC) + +#define SMU_SMUCSR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name) + +#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED)) + +#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED)) + +#define SCU_RAM_INIT_COMPLETED \ + (\ + SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800) + +#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \ + ((1 << (pe)) << ((peg) * 8)) + +#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + (\ + SMU_RESET_PROTOCOL_ENGINE(peg, 0) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINES() \ + (\ + SMU_RESET_PEG_PROTOCOL_ENGINES(0) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \ + ) + +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000) + +#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \ + ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16) + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000) + +/* + * It seems to make sense that if you are going to reset the protocol + * engine group that you would also reset all of the protocol engines */ +#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \ + (\ + (1 << ((peg) + 20)) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \ + (\ + SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \ + | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \ + ) + +#define SMU_RESET_SCU() (0xFFFFFFFF) + + + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0) +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000) + +#define SMU_TCA_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value) + +#define SMU_TCA_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000) + +#define SCU_UFQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value) + +#define SCU_UFQC_QUEUE_SIZE_SET(value) \ + SCU_UFQC_GEN_VAL(QUEUE_SIZE, value) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000) + +#define SCU_UFQPP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value) + +#define SCU_UFQPP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name) + +/* + * ***************************************************************************** + * * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000) + +#define SCU_UFQGP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value) + +#define SCU_UFQGP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name) + +#define SCU_UFQGP_CYCLE_BIT(value) \ + SCU_UFQGP_GEN_BIT(CYCLE_BIT, value) + +#define SCU_UFQGP_GET_POINTER(value) \ + SCU_UFQGP_GEN_VALUE(POINTER, value) + +#define SCU_UFQGP_ENABLE(value) \ + (SCU_UFQGP_GEN_BIT(ENABLE) | value) + +#define SCU_UFQGP_DISABLE(value) \ + (~SCU_UFQGP_GEN_BIT(ENABLE) & value) + +#define SCU_UFQGP_VALUE(bit, value) \ + (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value)) + +/* ***************************************************************************** */ +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000) +#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000) + +#define SCU_PDMACR_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value) + +#define SCU_PDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name) + +#define SCU_PDMACR_BE_GEN_BIT(name) \ + SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name) + +/* ***************************************************************************** */ +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8) +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100) + +#define SCU_CDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name) + +/* + * ***************************************************************************** + * * SCU Link Layer Registers + * ***************************************************************************** */ +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000) + +#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value) + + +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2) +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020) +#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD) + +#define SCU_SAS_LLSTA_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_STATUS_ ## name) + + +/* TODO: Where is the SATA_PSELTOV register? */ + +/* + * ***************************************************************************** + * * SCU SAS Maximum Arbitration Wait Time Timeout Register + * ***************************************************************************** */ +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000) + +#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value) + +#define SCU_SAS_MAWTTOV_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name) + + +/* + * TODO: Where is the SAS_LNKTOV regsiter? + * TODO: Where is the SAS_PHYTOV register? */ + +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1) + +#define SCU_SAS_TIID_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value) + +#define SCU_SAS_TIID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name) + +/* SAS Identify Frame PHY Identifier Register */ +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF) + +#define SCU_SAS_TIPID_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value) + +#define SCU_SAS_TIPID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name) + + +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4) +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000) +#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F) +#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F) +#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000) + +#define SCU_SAS_PCFG_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) + +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000) + +#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value) + +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000) + +#define SCU_ENSPINUP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value) + +#define SCU_ENSPINUP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name) + + +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D) + +#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value) + +#define SCU_SAS_PHYCAP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name) + + +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00) + +#define SCU_PSZGCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value) + +#define SCU_PSZGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name) + +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9) + +#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val) + +#define SCU_PEG_SCUVZECR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name) + + +/* + * ***************************************************************************** + * * Port Task Scheduler registers shift and mask values + * ***************************************************************************** */ +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0) +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000) +#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25) +#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000) +#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002) +#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000) +#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000) + +#define SCU_PTSGCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val) + +#define SCU_PTSGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name) + + +/* ***************************************************************************** */ +#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000) + +#define SCU_RTCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_ ## name, val) + + +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000) + +#define SCU_RTCCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC) + +#define SCU_PTSxCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8) + +#define SCU_PTSxSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name) + + +/* + * ***************************************************************************** + * * SGPIO Register shift and mask values + * ***************************************************************************** */ +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0) +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000) +#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8) + +#define SCU_SGICRx_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name) + +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000) + +#define SCU_SGPBRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0) + +#define SCU_SGVSCR_GEN_VAL(value) \ + SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value) + +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800) +#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000) + +#define SCU_SGODSR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value) + +#define SCU_SGODSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name) + +/* + * ***************************************************************************** + * * SMU Registers + * ***************************************************************************** */ + +/* + * ---------------------------------------------------------------------------- + * SMU Registers + * These registers are based off of BAR0 + * + * To calculate the offset for other functions use + * BAR0 + FN# * SystemPageSize * 2 + * + * The TCA is only accessable from FN#0 (Physical Function) and each + * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or + * TCA0 for FN#0 is at BAR0 + 0x0400 + * TCA1 for FN#1 is at BAR0 + 0x0404 + * etc. + * ---------------------------------------------------------------------------- + * Accessable to all FN#s */ +#define SCU_SMU_PCP_OFFSET 0x0000 +#define SCU_SMU_AMR_OFFSET 0x0004 +#define SCU_SMU_ISR_OFFSET 0x0010 +#define SCU_SMU_IMR_OFFSET 0x0014 +#define SCU_SMU_ICC_OFFSET 0x0018 +#define SCU_SMU_HTTLBAR_OFFSET 0x0020 +#define SCU_SMU_HTTUBAR_OFFSET 0x0024 +#define SCU_SMU_TCR_OFFSET 0x0028 +#define SCU_SMU_CQLBAR_OFFSET 0x0030 +#define SCU_SMU_CQUBAR_OFFSET 0x0034 +#define SCU_SMU_CQPR_OFFSET 0x0040 +#define SCU_SMU_CQGR_OFFSET 0x0044 +#define SCU_SMU_CQC_OFFSET 0x0048 +/* Accessable to FN#0 only */ +#define SCU_SMU_RNCLBAR_OFFSET 0x0080 +#define SCU_SMU_RNCUBAR_OFFSET 0x0084 +#define SCU_SMU_DCC_OFFSET 0x0090 +#define SCU_SMU_DFC_OFFSET 0x0094 +#define SCU_SMU_SMUCSR_OFFSET 0x0098 +#define SCU_SMU_SCUSRCR_OFFSET 0x009C +#define SCU_SMU_SMAW_OFFSET 0x00A0 +#define SCU_SMU_SMDW_OFFSET 0x00A4 +/* Accessable to FN#0 only */ +#define SCU_SMU_TCA_OFFSET 0x0400 +/* Accessable to all FN#s */ +#define SCU_SMU_MT_MLAR0_OFFSET 0x2000 +#define SCU_SMU_MT_MUAR0_OFFSET 0x2004 +#define SCU_SMU_MT_MDR0_OFFSET 0x2008 +#define SCU_SMU_MT_VCR0_OFFSET 0x200C +#define SCU_SMU_MT_MLAR1_OFFSET 0x2010 +#define SCU_SMU_MT_MUAR1_OFFSET 0x2014 +#define SCU_SMU_MT_MDR1_OFFSET 0x2018 +#define SCU_SMU_MT_VCR1_OFFSET 0x201C +#define SCU_SMU_MPBA_OFFSET 0x3000 + +/** + * struct smu_registers - These are the SMU registers + * + * + */ +struct smu_registers { +/* 0x0000 PCP */ + u32 post_context_port; +/* 0x0004 AMR */ + u32 address_modifier; + u32 reserved_08; + u32 reserved_0C; +/* 0x0010 ISR */ + u32 interrupt_status; +/* 0x0014 IMR */ + u32 interrupt_mask; +/* 0x0018 ICC */ + u32 interrupt_coalesce_control; + u32 reserved_1C; +/* 0x0020 HTTLBAR */ + u32 host_task_table_lower; +/* 0x0024 HTTUBAR */ + u32 host_task_table_upper; +/* 0x0028 TCR */ + u32 task_context_range; + u32 reserved_2C; +/* 0x0030 CQLBAR */ + u32 completion_queue_lower; +/* 0x0034 CQUBAR */ + u32 completion_queue_upper; + u32 reserved_38; + u32 reserved_3C; +/* 0x0040 CQPR */ + u32 completion_queue_put; +/* 0x0044 CQGR */ + u32 completion_queue_get; +/* 0x0048 CQC */ + u32 completion_queue_control; + u32 reserved_4C; + u32 reserved_5x[4]; + u32 reserved_6x[4]; + u32 reserved_7x[4]; +/* + * Accessable to FN#0 only + * 0x0080 RNCLBAR */ + u32 remote_node_context_lower; +/* 0x0084 RNCUBAR */ + u32 remote_node_context_upper; + u32 reserved_88; + u32 reserved_8C; +/* 0x0090 DCC */ + u32 device_context_capacity; +/* 0x0094 DFC */ + u32 device_function_capacity; +/* 0x0098 SMUCSR */ + u32 control_status; +/* 0x009C SCUSRCR */ + u32 soft_reset_control; +/* 0x00A0 SMAW */ + u32 mmr_address_window; +/* 0x00A4 SMDW */ + u32 mmr_data_window; + u32 reserved_A8; + u32 reserved_AC; +/* A whole bunch of reserved space */ + u32 reserved_Bx[4]; + u32 reserved_Cx[4]; + u32 reserved_Dx[4]; + u32 reserved_Ex[4]; + u32 reserved_Fx[4]; + u32 reserved_1xx[64]; + u32 reserved_2xx[64]; + u32 reserved_3xx[64]; +/* + * Accessable to FN#0 only + * 0x0400 TCA */ + u32 task_context_assignment[256]; +/* MSI-X registers not included */ +}; + +/* + * ***************************************************************************** + * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_BASE 0x6000 +#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000 +#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004 +#define SCU_SDMA_UFLHBAR_OFFSET 0x0008 +#define SCU_SDMA_UFUHBAR_OFFSET 0x000C +#define SCU_SDMA_UFQC_OFFSET 0x0010 +#define SCU_SDMA_UFQPP_OFFSET 0x0014 +#define SCU_SDMA_UFQGP_OFFSET 0x0018 +#define SCU_SDMA_PDMACR_OFFSET 0x001C +#define SCU_SDMA_CDMACR_OFFSET 0x0080 + +/** + * struct scu_sdma_registers - These are the SCU SDMA Registers + * + * + */ +struct scu_sdma_registers { +/* 0x0000 PUFATLHAR */ + u32 uf_address_table_lower; +/* 0x0004 PUFATUHAR */ + u32 uf_address_table_upper; +/* 0x0008 UFLHBAR */ + u32 uf_header_base_address_lower; +/* 0x000C UFUHBAR */ + u32 uf_header_base_address_upper; +/* 0x0010 UFQC */ + u32 unsolicited_frame_queue_control; +/* 0x0014 UFQPP */ + u32 unsolicited_frame_put_pointer; +/* 0x0018 UFQGP */ + u32 unsolicited_frame_get_pointer; +/* 0x001C PDMACR */ + u32 pdma_configuration; +/* Reserved until offset 0x80 */ + u32 reserved_0020_007C[0x18]; +/* 0x0080 CDMACR */ + u32 cdma_configuration; +/* Remainder SDMA register space */ + u32 reserved_0084_0400[0xDF]; + +}; + +/* + * ***************************************************************************** + * * SCU Link Registers + * ***************************************************************************** */ +#define SCU_PEG0_OFFSET 0x0000 +#define SCU_PEG1_OFFSET 0x8000 + +#define SCU_TL0_OFFSET 0x0000 +#define SCU_TL1_OFFSET 0x0400 +#define SCU_TL2_OFFSET 0x0800 +#define SCU_TL3_OFFSET 0x0C00 + +#define SCU_LL_OFFSET 0x0080 +#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET) +#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET) +#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET) +#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET) + +/* Transport Layer Offsets (PEG + TL) */ +#define SCU_TLCR_OFFSET 0x0000 +#define SCU_TLADTR_OFFSET 0x0004 +#define SCU_TLTTMR_OFFSET 0x0008 +#define SCU_TLEECR0_OFFSET 0x000C +#define SCU_STPTLDARNI_OFFSET 0x0010 + + +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0) +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010) +#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB) + +#define SCU_TLCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_TLCR_ ## name) + +/** + * struct scu_transport_layer_registers - These are the SCU Transport Layer + * registers + * + * + */ +struct scu_transport_layer_registers { + /* 0x0000 TLCR */ + u32 control; + /* 0x0004 TLADTR */ + u32 arbitration_delay_timer; + /* 0x0008 TLTTMR */ + u32 timer_test_mode; + /* 0x000C reserved */ + u32 reserved_0C; + /* 0x0010 STPTLDARNI */ + u32 stp_rni; + /* 0x0014 TLFEWPORCTRL */ + u32 tlfe_wpo_read_control; + /* 0x0018 TLFEWPORDATA */ + u32 tlfe_wpo_read_data; + /* 0x001C RXTLSSCSR1 */ + u32 rxtl_single_step_control_status_1; + /* 0x0020 RXTLSSCSR2 */ + u32 rxtl_single_step_control_status_2; + /* 0x0024 AWTRDDCR */ + u32 tlfe_awt_retry_delay_debug_control; + /* Remainder of TL memory space */ + u32 reserved_0028_007F[0x16]; + +}; + +/* Protocol Engine Group Registers */ +#define SCU_SCUVZECRx_OFFSET 0x1080 + +/* Link Layer Offsets (PEG + TL + LL) */ +#define SCU_SAS_SPDTOV_OFFSET 0x0000 +#define SCU_SAS_LLSTA_OFFSET 0x0004 +#define SCU_SATA_PSELTOV_OFFSET 0x0008 +#define SCU_SAS_TIMETOV_OFFSET 0x0010 +#define SCU_SAS_LOSTOT_OFFSET 0x0014 +#define SCU_SAS_LNKTOV_OFFSET 0x0018 +#define SCU_SAS_PHYTOV_OFFSET 0x001C +#define SCU_SAS_AFERCNT_OFFSET 0x0020 +#define SCU_SAS_WERCNT_OFFSET 0x0024 +#define SCU_SAS_TIID_OFFSET 0x0028 +#define SCU_SAS_TIDNH_OFFSET 0x002C +#define SCU_SAS_TIDNL_OFFSET 0x0030 +#define SCU_SAS_TISSAH_OFFSET 0x0034 +#define SCU_SAS_TISSAL_OFFSET 0x0038 +#define SCU_SAS_TIPID_OFFSET 0x003C +#define SCU_SAS_TIRES2_OFFSET 0x0040 +#define SCU_SAS_ADRSTA_OFFSET 0x0044 +#define SCU_SAS_MAWTTOV_OFFSET 0x0048 +#define SCU_SAS_FRPLDFIL_OFFSET 0x0054 +#define SCU_SAS_RFCNT_OFFSET 0x0060 +#define SCU_SAS_TFCNT_OFFSET 0x0064 +#define SCU_SAS_RFDCNT_OFFSET 0x0068 +#define SCU_SAS_TFDCNT_OFFSET 0x006C +#define SCU_SAS_LERCNT_OFFSET 0x0070 +#define SCU_SAS_RDISERRCNT_OFFSET 0x0074 +#define SCU_SAS_CRERCNT_OFFSET 0x0078 +#define SCU_STPCTL_OFFSET 0x007C +#define SCU_SAS_PCFG_OFFSET 0x0080 +#define SCU_SAS_CLKSM_OFFSET 0x0084 +#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088 +#define SCU_SAS_TXCOMINIT_OFFSET 0x008C +#define SCU_SAS_TXCOMSAS_OFFSET 0x0090 +#define SCU_SAS_COMINIT_OFFSET 0x0094 +#define SCU_SAS_COMWAKE_OFFSET 0x0098 +#define SCU_SAS_COMSAS_OFFSET 0x009C +#define SCU_SAS_SFERCNT_OFFSET 0x00A0 +#define SCU_SAS_CDFERCNT_OFFSET 0x00A4 +#define SCU_SAS_DNFERCNT_OFFSET 0x00A8 +#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC +#define SCU_SAS_CNTCTL_OFFSET 0x00B0 +#define SCU_SAS_SSPTOV_OFFSET 0x00B4 +#define SCU_FTCTL_OFFSET 0x00B8 +#define SCU_FRCTL_OFFSET 0x00BC +#define SCU_FTWMRK_OFFSET 0x00C0 +#define SCU_ENSPINUP_OFFSET 0x00C4 +#define SCU_SAS_TRNTOV_OFFSET 0x00C8 +#define SCU_SAS_PHYCAP_OFFSET 0x00CC +#define SCU_SAS_PHYCTL_OFFSET 0x00D0 +#define SCU_SAS_LLCTL_OFFSET 0x00D8 +#define SCU_AFE_XCVRCR_OFFSET 0x00DC +#define SCU_AFE_LUTCR_OFFSET 0x00E0 + +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000) +#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00) + +#define SCU_SAS_LLCTL_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value) + +#define SCU_SAS_LLCTL_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name) + + +/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */ +#define SCU_PSZGCR_OFFSET 0x00E4 +#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8 +/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */ + +#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */ + +/** + * struct scu_link_layer_registers - SCU Link Layer Registers + * + * + */ +struct scu_link_layer_registers { +/* 0x0000 SAS_SPDTOV */ + u32 speed_negotiation_timers; +/* 0x0004 SAS_LLSTA */ + u32 link_layer_status; +/* 0x0008 SATA_PSELTOV */ + u32 port_selector_timeout; + u32 reserved0C; +/* 0x0010 SAS_TIMETOV */ + u32 timeout_unit_value; +/* 0x0014 SAS_RCDTOV */ + u32 rcd_timeout; +/* 0x0018 SAS_LNKTOV */ + u32 link_timer_timeouts; +/* 0x001C SAS_PHYTOV */ + u32 sas_phy_timeouts; +/* 0x0020 SAS_AFERCNT */ + u32 received_address_frame_error_counter; +/* 0x0024 SAS_WERCNT */ + u32 invalid_dword_counter; +/* 0x0028 SAS_TIID */ + u32 transmit_identification; +/* 0x002C SAS_TIDNH */ + u32 sas_device_name_high; +/* 0x0030 SAS_TIDNL */ + u32 sas_device_name_low; +/* 0x0034 SAS_TISSAH */ + u32 source_sas_address_high; +/* 0x0038 SAS_TISSAL */ + u32 source_sas_address_low; +/* 0x003C SAS_TIPID */ + u32 identify_frame_phy_id; +/* 0x0040 SAS_TIRES2 */ + u32 identify_frame_reserved; +/* 0x0044 SAS_ADRSTA */ + u32 received_address_frame; +/* 0x0048 SAS_MAWTTOV */ + u32 maximum_arbitration_wait_timer_timeout; +/* 0x004C SAS_PTxC */ + u32 transmit_primitive; +/* 0x0050 SAS_RORES */ + u32 error_counter_event_notification_control; +/* 0x0054 SAS_FRPLDFIL */ + u32 frxq_payload_fill_threshold; +/* 0x0058 SAS_LLHANG_TOT */ + u32 link_layer_hang_detection_timeout; + u32 reserved_5C; +/* 0x0060 SAS_RFCNT */ + u32 received_frame_count; +/* 0x0064 SAS_TFCNT */ + u32 transmit_frame_count; +/* 0x0068 SAS_RFDCNT */ + u32 received_dword_count; +/* 0x006C SAS_TFDCNT */ + u32 transmit_dword_count; +/* 0x0070 SAS_LERCNT */ + u32 loss_of_sync_error_count; +/* 0x0074 SAS_RDISERRCNT */ + u32 running_disparity_error_count; +/* 0x0078 SAS_CRERCNT */ + u32 received_frame_crc_error_count; +/* 0x007C STPCTL */ + u32 stp_control; +/* 0x0080 SAS_PCFG */ + u32 phy_configuration; +/* 0x0084 SAS_CLKSM */ + u32 clock_skew_management; +/* 0x0088 SAS_TXCOMWAKE */ + u32 transmit_comwake_signal; +/* 0x008C SAS_TXCOMINIT */ + u32 transmit_cominit_signal; +/* 0x0090 SAS_TXCOMSAS */ + u32 transmit_comsas_signal; +/* 0x0094 SAS_COMINIT */ + u32 cominit_control; +/* 0x0098 SAS_COMWAKE */ + u32 comwake_control; +/* 0x009C SAS_COMSAS */ + u32 comsas_control; +/* 0x00A0 SAS_SFERCNT */ + u32 received_short_frame_count; +/* 0x00A4 SAS_CDFERCNT */ + u32 received_frame_without_credit_count; +/* 0x00A8 SAS_DNFERCNT */ + u32 received_frame_after_done_count; +/* 0x00AC SAS_PRSTERCNT */ + u32 phy_reset_problem_count; +/* 0x00B0 SAS_CNTCTL */ + u32 counter_control; +/* 0x00B4 SAS_SSPTOV */ + u32 ssp_timer_timeout_values; +/* 0x00B8 FTCTL */ + u32 ftx_control; +/* 0x00BC FRCTL */ + u32 frx_control; +/* 0x00C0 FTWMRK */ + u32 ftx_watermark; +/* 0x00C4 ENSPINUP */ + u32 notify_enable_spinup_control; +/* 0x00C8 SAS_TRNTOV */ + u32 sas_training_sequence_timer_values; +/* 0x00CC SAS_PHYCAP */ + u32 phy_capabilities; +/* 0x00D0 SAS_PHYCTL */ + u32 phy_control; + u32 reserved_d4; +/* 0x00D8 LLCTL */ + u32 link_layer_control; +/* 0x00DC AFE_XCVRCR */ + u32 afe_xcvr_control; +/* 0x00E0 AFE_LUTCR */ + u32 afe_lookup_table_control; +/* 0x00E4 PSZGCR */ + u32 phy_source_zone_group_control; +/* 0x00E8 SAS_RECPHYCAP */ + u32 receive_phycap; + u32 reserved_ec; +/* 0x00F0 SNAFERXRSTCTL */ + u32 speed_negotiation_afe_rx_reset_control; +/* 0x00F4 SAS_SSIPMCTL */ + u32 power_management_control; +/* 0x00F8 SAS_PSPREQ_PRIM */ + u32 sas_pm_partial_request_primitive; +/* 0x00FC SAS_PSSREQ_PRIM */ + u32 sas_pm_slumber_request_primitive; +/* 0x0100 SAS_PPSACK_PRIM */ + u32 sas_pm_ack_primitive_register; +/* 0x0104 SAS_PSNAK_PRIM */ + u32 sas_pm_nak_primitive_register; +/* 0x0108 SAS_SSIPMTOV */ + u32 sas_primitive_timeout; + u32 reserved_10c; +/* 0x0110 - 0x011C PLAPRDCTRLxREG */ + u32 pla_product_control[4]; +/* 0x0120 PLAPRDSUMREG */ + u32 pla_product_sum; +/* 0x0124 PLACONTROLREG */ + u32 pla_control; +/* Remainder of memory space 896 bytes */ + u32 reserved_0128_037f[0x96]; + +}; + +/* + * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC + * u32 primitive_transmit_control; */ + +/* + * ---------------------------------------------------------------------------- + * SGPIO + * ---------------------------------------------------------------------------- */ +#define SCU_SGPIO_OFFSET 0x1400 + +/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */ +#define SCU_SGPIO_SGICR_OFFSET 0x0000 +#define SCU_SGPIO_SGPBR_OFFSET 0x0004 +#define SCU_SGPIO_SGSDLR_OFFSET 0x0008 +#define SCU_SGPIO_SGSDUR_OFFSET 0x000C +#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010 +#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014 +#define SCU_SGPIO_SGVSCR_OFFSET 0x0018 +/* Address from 0x0820 to 0x083C */ +#define SCU_SGPIO_SGODSR_OFFSET 0x0020 + +/** + * struct scu_sgpio_registers - SCU SGPIO Registers + * + * + */ +struct scu_sgpio_registers { +/* 0x0000 SGPIO_SGICR */ + u32 interface_control; +/* 0x0004 SGPIO_SGPBR */ + u32 blink_rate; +/* 0x0008 SGPIO_SGSDLR */ + u32 start_drive_lower; +/* 0x000C SGPIO_SGSDUR */ + u32 start_drive_upper; +/* 0x0010 SGPIO_SGSIDLR */ + u32 serial_input_lower; +/* 0x0014 SGPIO_SGSIDUR */ + u32 serial_input_upper; +/* 0x0018 SGPIO_SGVSCR */ + u32 vendor_specific_code; +/* 0x0020 SGPIO_SGODSR */ + u32 ouput_data_select[8]; +/* Remainder of memory space 256 bytes */ + u32 reserved_1444_14ff[0x31]; + +}; + +/* + * ***************************************************************************** + * * Defines for VIIT entry offsets + * * Access additional entries by SCU_VIIT_BASE + index * 0x10 + * ***************************************************************************** */ +#define SCU_VIIT_BASE 0x1c00 + +struct scu_viit_registers { + u32 registers[256]; +}; + +/* + * ***************************************************************************** + * * SCU PORT TASK SCHEDULER REGISTERS + * ***************************************************************************** */ + +#define SCU_PTSG_BASE 0x1000 + +#define SCU_PTSG_PTSGCR_OFFSET 0x0000 +#define SCU_PTSG_RTCR_OFFSET 0x0004 +#define SCU_PTSG_RTCCR_OFFSET 0x0008 +#define SCU_PTSG_PTS0CR_OFFSET 0x0010 +#define SCU_PTSG_PTS0SR_OFFSET 0x0014 +#define SCU_PTSG_PTS1CR_OFFSET 0x0018 +#define SCU_PTSG_PTS1SR_OFFSET 0x001C +#define SCU_PTSG_PTS2CR_OFFSET 0x0020 +#define SCU_PTSG_PTS2SR_OFFSET 0x0024 +#define SCU_PTSG_PTS3CR_OFFSET 0x0028 +#define SCU_PTSG_PTS3SR_OFFSET 0x002C +#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030 +#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034 +#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038 +#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C +#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040 +#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044 + +/** + * struct scu_port_task_scheduler_registers - These are the control/stats pairs + * for each Port Task Scheduler. + * + * + */ +struct scu_port_task_scheduler_registers { + u32 control; + u32 status; +}; + +/** + * struct scu_port_task_scheduler_group_registers - These are the PORT Task + * Scheduler registers + * + * + */ +struct scu_port_task_scheduler_group_registers { +/* 0x0000 PTSGCR */ + u32 control; +/* 0x0004 RTCR */ + u32 real_time_clock; +/* 0x0008 RTCCR */ + u32 real_time_clock_control; +/* 0x000C */ + u32 reserved_0C; +/* + * 0x0010 PTS0CR + * 0x0014 PTS0SR + * 0x0018 PTS1CR + * 0x001C PTS1SR + * 0x0020 PTS2CR + * 0x0024 PTS2SR + * 0x0028 PTS3CR + * 0x002C PTS3SR */ + struct scu_port_task_scheduler_registers port[4]; +/* + * 0x0030 PCSPE0CR + * 0x0034 PCSPE1CR + * 0x0038 PCSPE2CR + * 0x003C PCSPE3CR */ + u32 protocol_engine[4]; +/* 0x0040 ETMTSCCR */ + u32 tc_scanning_interval_control; +/* 0x0044 ETMRNSCCR */ + u32 rnc_scanning_interval_control; +/* Remainder of memory space 128 bytes */ + u32 reserved_1048_107f[0x0E]; + +}; + +#define SCU_PTSG_SCUVZECR_OFFSET 0x003C + +/* + * ***************************************************************************** + * * AFE REGISTERS + * ***************************************************************************** */ +#define SCU_AFE_MMR_BASE 0xE000 + +/* + * AFE 0 is at offset 0x0800 + * AFE 1 is at offset 0x0900 + * AFE 2 is at offset 0x0a00 + * AFE 3 is at offset 0x0b00 */ +struct scu_afe_transceiver { + /* 0x0000 AFE_XCVR_CTRL0 */ + u32 afe_xcvr_control0; + /* 0x0004 AFE_XCVR_CTRL1 */ + u32 afe_xcvr_control1; + /* 0x0008 */ + u32 reserved_0008; + /* 0x000c afe_dfx_rx_control0 */ + u32 afe_dfx_rx_control0; + /* 0x0010 AFE_DFX_RX_CTRL1 */ + u32 afe_dfx_rx_control1; + /* 0x0014 */ + u32 reserved_0014; + /* 0x0018 AFE_DFX_RX_STS0 */ + u32 afe_dfx_rx_status0; + /* 0x001c AFE_DFX_RX_STS1 */ + u32 afe_dfx_rx_status1; + /* 0x0020 */ + u32 reserved_0020; + /* 0x0024 AFE_TX_CTRL */ + u32 afe_tx_control; + /* 0x0028 AFE_TX_AMP_CTRL0 */ + u32 afe_tx_amp_control0; + /* 0x002c AFE_TX_AMP_CTRL1 */ + u32 afe_tx_amp_control1; + /* 0x0030 AFE_TX_AMP_CTRL2 */ + u32 afe_tx_amp_control2; + /* 0x0034 AFE_TX_AMP_CTRL3 */ + u32 afe_tx_amp_control3; + /* 0x0038 afe_tx_ssc_control */ + u32 afe_tx_ssc_control; + /* 0x003c */ + u32 reserved_003c; + /* 0x0040 AFE_RX_SSC_CTRL0 */ + u32 afe_rx_ssc_control0; + /* 0x0044 AFE_RX_SSC_CTRL1 */ + u32 afe_rx_ssc_control1; + /* 0x0048 AFE_RX_SSC_CTRL2 */ + u32 afe_rx_ssc_control2; + /* 0x004c AFE_RX_EQ_STS0 */ + u32 afe_rx_eq_status0; + /* 0x0050 AFE_RX_EQ_STS1 */ + u32 afe_rx_eq_status1; + /* 0x0054 AFE_RX_CDR_STS */ + u32 afe_rx_cdr_status; + /* 0x0058 */ + u32 reserved_0058; + /* 0x005c AFE_CHAN_CTRL */ + u32 afe_channel_control; + /* 0x0060-0x006c */ + u32 reserved_0060_006c[0x04]; + /* 0x0070 AFE_XCVR_EC_STS0 */ + u32 afe_xcvr_error_capture_status0; + /* 0x0074 AFE_XCVR_EC_STS1 */ + u32 afe_xcvr_error_capture_status1; + /* 0x0078 AFE_XCVR_EC_STS2 */ + u32 afe_xcvr_error_capture_status2; + /* 0x007c afe_xcvr_ec_status3 */ + u32 afe_xcvr_error_capture_status3; + /* 0x0080 AFE_XCVR_EC_STS4 */ + u32 afe_xcvr_error_capture_status4; + /* 0x0084 AFE_XCVR_EC_STS5 */ + u32 afe_xcvr_error_capture_status5; + /* 0x0088-0x00fc */ + u32 reserved_008c_00fc[0x1e]; +}; + +/** + * struct scu_afe_registers - AFE Regsiters + * + * + */ +/* Uaoa AFE registers */ +struct scu_afe_registers { + /* 0Xe000 AFE_BIAS_CTRL */ + u32 afe_bias_control; + u32 reserved_0004; + /* 0x0008 AFE_PLL_CTRL0 */ + u32 afe_pll_control0; + /* 0x000c AFE_PLL_CTRL1 */ + u32 afe_pll_control1; + /* 0x0010 AFE_PLL_CTRL2 */ + u32 afe_pll_control2; + /* 0x0014 AFE_CB_STS */ + u32 afe_common_block_status; + /* 0x0018-0x007c */ + u32 reserved_18_7c[0x1a]; + /* 0x0080 AFE_PMSN_MCTRL0 */ + u32 afe_pmsn_master_control0; + /* 0x0084 AFE_PMSN_MCTRL1 */ + u32 afe_pmsn_master_control1; + /* 0x0088 AFE_PMSN_MCTRL2 */ + u32 afe_pmsn_master_control2; + /* 0x008C-0x00fc */ + u32 reserved_008c_00fc[0x1D]; + /* 0x0100 AFE_DFX_MST_CTRL0 */ + u32 afe_dfx_master_control0; + /* 0x0104 AFE_DFX_MST_CTRL1 */ + u32 afe_dfx_master_control1; + /* 0x0108 AFE_DFX_DCL_CTRL */ + u32 afe_dfx_dcl_control; + /* 0x010c AFE_DFX_DMON_CTRL */ + u32 afe_dfx_digital_monitor_control; + /* 0x0110 AFE_DFX_AMONP_CTRL */ + u32 afe_dfx_analog_p_monitor_control; + /* 0x0114 AFE_DFX_AMONN_CTRL */ + u32 afe_dfx_analog_n_monitor_control; + /* 0x0118 AFE_DFX_NTL_STS */ + u32 afe_dfx_ntl_status; + /* 0x011c AFE_DFX_FIFO_STS0 */ + u32 afe_dfx_fifo_status0; + /* 0x0120 AFE_DFX_FIFO_STS1 */ + u32 afe_dfx_fifo_status1; + /* 0x0124 AFE_DFX_MPAT_CTRL */ + u32 afe_dfx_master_pattern_control; + /* 0x0128 AFE_DFX_P0_CTRL */ + u32 afe_dfx_p0_control; + /* 0x012c-0x01a8 AFE_DFX_P0_DRx */ + u32 afe_dfx_p0_data[32]; + /* 0x01ac */ + u32 reserved_01ac; + /* 0x01b0-0x020c AFE_DFX_P0_IRx */ + u32 afe_dfx_p0_instruction[24]; + /* 0x0210 */ + u32 reserved_0210; + /* 0x0214 AFE_DFX_P1_CTRL */ + u32 afe_dfx_p1_control; + /* 0x0218-0x245 AFE_DFX_P1_DRx */ + u32 afe_dfx_p1_data[16]; + /* 0x0258-0x029c */ + u32 reserved_0258_029c[0x12]; + /* 0x02a0-0x02bc AFE_DFX_P1_IRx */ + u32 afe_dfx_p1_instruction[8]; + /* 0x02c0-0x2fc */ + u32 reserved_02c0_02fc[0x10]; + /* 0x0300 AFE_DFX_TX_PMSN_CTRL */ + u32 afe_dfx_tx_pmsn_control; + /* 0x0304 AFE_DFX_RX_PMSN_CTRL */ + u32 afe_dfx_rx_pmsn_control; + u32 reserved_0308; + /* 0x030c AFE_DFX_NOA_CTRL0 */ + u32 afe_dfx_noa_control0; + /* 0x0310 AFE_DFX_NOA_CTRL1 */ + u32 afe_dfx_noa_control1; + /* 0x0314 AFE_DFX_NOA_CTRL2 */ + u32 afe_dfx_noa_control2; + /* 0x0318 AFE_DFX_NOA_CTRL3 */ + u32 afe_dfx_noa_control3; + /* 0x031c AFE_DFX_NOA_CTRL4 */ + u32 afe_dfx_noa_control4; + /* 0x0320 AFE_DFX_NOA_CTRL5 */ + u32 afe_dfx_noa_control5; + /* 0x0324 AFE_DFX_NOA_CTRL6 */ + u32 afe_dfx_noa_control6; + /* 0x0328 AFE_DFX_NOA_CTRL7 */ + u32 afe_dfx_noa_control7; + /* 0x032c-0x07fc */ + u32 reserved_032c_07fc[0x135]; + + /* 0x0800-0x0bfc */ + struct scu_afe_transceiver scu_afe_xcvr[4]; + + /* 0x0c00-0x0ffc */ + u32 reserved_0c00_0ffc[0x0100]; +}; + +struct scu_protocol_engine_group_registers { + u32 table[0xE0]; +}; + + +struct scu_viit_iit { + u32 table[256]; +}; + +/** + * Placeholder for the ZONE Partition Table information ZONING will not be + * included in the 1.1 release. + * + * + */ +struct scu_zone_partition_table { + u32 table[2048]; +}; + +/** + * Placeholder for the CRAM register since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_completion_ram { + u32 ram[128]; +}; + +/** + * Placeholder for the FBRAM registers since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_frame_buffer_ram { + u32 ram[128]; +}; + +#define scu_scratch_ram_SIZE_IN_DWORDS 256 + +/** + * Placeholder for the scratch RAM registers. + * + * + */ +struct scu_scratch_ram { + u32 ram[scu_scratch_ram_SIZE_IN_DWORDS]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_protocol_engine_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_hub_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_host_interface_partition { + u32 reserved[64]; +}; + +/** + * struct transport_link_layer_pair - The SCU Hardware pairs up the TL + * registers with the LL registers so we must place them adjcent to make the + * array of registers in the PEG. + * + * + */ +struct transport_link_layer_pair { + struct scu_transport_layer_registers tl; + struct scu_link_layer_registers ll; +}; + +/** + * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space. + * These registers are unique to each protocol engine group. There can be + * at most two PEG for a single SCU part. + * + * + */ +struct scu_peg_registers { + struct transport_link_layer_pair pe[4]; + struct scu_port_task_scheduler_group_registers ptsg; + struct scu_protocol_engine_group_registers peg; + struct scu_sgpio_registers sgpio; + u32 reserved_01500_1BFF[0x1C0]; + struct scu_viit_entry viit[64]; + struct scu_zone_partition_table zpt0; + struct scu_zone_partition_table zpt1; +}; + +/** + * struct scu_registers - SCU regsiters including both PEG registers if we turn + * on that compile option. All of these registers are in the memory mapped + * space returned from BAR1. + * + * + */ +struct scu_registers { + /* 0x0000 - PEG 0 */ + struct scu_peg_registers peg0; + + /* 0x6000 - SDMA and Miscellaneous */ + struct scu_sdma_registers sdma; + struct scu_completion_ram cram; + struct scu_frame_buffer_ram fbram; + u32 reserved_6800_69FF[0x80]; + struct noa_protocol_engine_partition noa_pe; + struct noa_hub_partition noa_hub; + struct noa_host_interface_partition noa_if; + u32 reserved_6d00_7fff[0x4c0]; + + /* 0x8000 - PEG 1 */ + struct scu_peg_registers peg1; + + /* 0xE000 - AFE Registers */ + struct scu_afe_registers afe; + + /* 0xF000 - reserved */ + u32 reserved_f000_211fff[0x80c00]; + + /* 0x212000 - scratch RAM */ + struct scu_scratch_ram scratch_ram; +}; + +#endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c new file mode 100644 index 000000000000..b6e6368c2665 --- /dev/null +++ b/drivers/scsi/isci/remote_device.c @@ -0,0 +1,1501 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <scsi/sas.h> +#include "isci.h" +#include "port.h" +#include "remote_device.h" +#include "request.h" +#include "remote_node_context.h" +#include "scu_event_codes.h" +#include "task.h" + +/** + * isci_remote_device_not_ready() - This function is called by the ihost when + * the remote device is not ready. We mark the isci device as ready (not + * "ready_for_io") and signal the waiting proccess. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device + * + * sci_lock is held on entrance to this function. + */ +static void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, u32 reason) +{ + struct isci_request *ireq; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + switch (reason) { + case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: + set_bit(IDEV_GONE, &idev->flags); + break; + case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: + set_bit(IDEV_IO_NCQERROR, &idev->flags); + + /* Kill all outstanding requests for the device. */ + list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) { + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, idev, ireq); + + sci_controller_terminate_request(ihost, + idev, + ireq); + } + /* Fall through into the default case... */ + default: + clear_bit(IDEV_IO_READY, &idev->flags); + break; + } +} + +/** + * isci_remote_device_ready() - This function is called by the ihost when the + * remote device is ready. We mark the isci device as ready and signal the + * waiting proccess. + * @ihost: our valid isci_host + * @idev: remote device + * + */ +static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + + clear_bit(IDEV_IO_NCQERROR, &idev->flags); + set_bit(IDEV_IO_READY, &idev->flags); + if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) + wake_up(&ihost->eventq); +} + +/* called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void rnc_destruct_done(void *_dev) +{ + struct isci_remote_device *idev = _dev; + + BUG_ON(idev->started_request_count != 0); + sci_change_state(&idev->sm, SCI_DEV_STOPPED); +} + +static enum sci_status sci_remote_device_terminate_requests(struct isci_remote_device *idev) +{ + struct isci_host *ihost = idev->owning_port->owning_controller; + enum sci_status status = SCI_SUCCESS; + u32 i; + + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq = ihost->reqs[i]; + enum sci_status s; + + if (!test_bit(IREQ_ACTIVE, &ireq->flags) || + ireq->target_device != idev) + continue; + + s = sci_controller_terminate_request(ihost, idev, ireq); + if (s != SCI_SUCCESS) + status = s; + } + + return status; +} + +enum sci_status sci_remote_device_stop(struct isci_remote_device *idev, + u32 timeout) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_STOPPED: + return SCI_SUCCESS; + case SCI_DEV_STARTING: + /* device not started so there had better be no requests */ + BUG_ON(idev->started_request_count != 0); + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); + /* Transition to the stopping state and wait for the + * remote node to complete being posted and invalidated. + */ + sci_change_state(sm, SCI_DEV_STOPPING); + return SCI_SUCCESS; + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + sci_change_state(sm, SCI_DEV_STOPPING); + if (idev->started_request_count == 0) { + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); + return SCI_SUCCESS; + } else + return sci_remote_device_terminate_requests(idev); + break; + case SCI_DEV_STOPPING: + /* All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. + */ + return sci_remote_device_terminate_requests(idev); + case SCI_DEV_RESETTING: + sci_change_state(sm, SCI_DEV_STOPPING); + return SCI_SUCCESS; + } +} + +enum sci_status sci_remote_device_reset(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + sci_change_state(sm, SCI_DEV_RESETTING); + return SCI_SUCCESS; + } +} + +enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + if (state != SCI_DEV_RESETTING) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(sm, SCI_DEV_READY); + return SCI_SUCCESS; +} + +enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev, + u32 suspend_type) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + if (state != SCI_STP_DEV_CMD) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + return sci_remote_node_context_suspend(&idev->rnc, + suspend_type, NULL, NULL); +} + +enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev, + u32 frame_index) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_host *ihost = idev->owning_port->owning_controller; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + /* Return the frame back to the controller */ + sci_controller_release_frame(ihost, frame_index); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: { + struct isci_request *ireq; + struct ssp_frame_hdr hdr; + void *frame_header; + ssize_t word_cnt; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + if (status != SCI_SUCCESS) + return status; + + word_cnt = sizeof(hdr) / sizeof(u32); + sci_swab32_cpy(&hdr, frame_header, word_cnt); + + ireq = sci_request_by_tag(ihost, be16_to_cpu(hdr.tag)); + if (ireq && ireq->target_device == idev) { + /* The IO request is now in charge of releasing the frame */ + status = sci_io_request_frame_handler(ireq, frame_index); + } else { + /* We could not map this tag to a valid IO + * request Just toss the frame and continue + */ + sci_controller_release_frame(ihost, frame_index); + } + break; + } + case SCI_STP_DEV_NCQ: { + struct dev_to_host_fis *hdr; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&hdr); + if (status != SCI_SUCCESS) + return status; + + if (hdr->fis_type == FIS_SETDEVBITS && + (hdr->status & ATA_ERR)) { + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* TODO Check sactive and complete associated IO if any. */ + sci_change_state(sm, SCI_STP_DEV_NCQ_ERROR); + } else if (hdr->fis_type == FIS_REGD2H && + (hdr->status & ATA_ERR)) { + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + sci_change_state(&idev->sm, SCI_STP_DEV_NCQ_ERROR); + } else + status = SCI_FAILURE; + + sci_controller_release_frame(ihost, frame_index); + break; + } + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: + /* The device does not process any UF received from the hardware while + * in this state. All unsolicited frames are forwarded to the io request + * object. + */ + status = sci_io_request_frame_handler(idev->working_request, frame_index); + break; + } + + return status; +} + +static bool is_remote_device_ready(struct isci_remote_device *idev) +{ + + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + return true; + default: + return false; + } +} + +enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev, + u32 event_code) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = sci_remote_node_context_event_handler(&idev->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + sci_remote_node_context_suspend(&idev->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(idev), + "%s: device: %p event code: %x: %s\n", + __func__, idev, event_code, + is_remote_device_ready(idev) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + default: + dev_dbg(scirdev_to_dev(idev), + "%s: device: %p event code: %x: %s\n", + __func__, idev, event_code, + is_remote_device_ready(idev) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + if (status != SCI_SUCCESS) + return status; + + if (state == SCI_STP_DEV_IDLE) { + + /* We pick up suspension events to handle specifically to this + * state. We resume the RNC right away. + */ + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || + scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) + status = sci_remote_node_context_resume(&idev->rnc, NULL, NULL); + } + + return status; +} + +static void sci_remote_device_start_request(struct isci_remote_device *idev, + struct isci_request *ireq, + enum sci_status status) +{ + struct isci_port *iport = idev->owning_port; + + /* cleanup requests that failed after starting on the port */ + if (status != SCI_SUCCESS) + sci_port_complete_io(iport, idev, ireq); + else { + kref_get(&idev->kref); + idev->started_request_count++; + } +} + +enum sci_status sci_remote_device_start_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + /* attempt to start an io request for this device object. The remote + * device object will issue the start request for the io and if + * successful it will start the request for the port object then + * increment its own request count. + */ + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + break; + case SCI_STP_DEV_IDLE: { + /* handle the start io operation for a sata device that is in + * the command idle state. - Evalute the type of IO request to + * be started - If its an NCQ request change to NCQ substate - + * If its any other command change to the CMD substate + * + * If this is a softreset we may want to have a different + * substate. + */ + enum sci_remote_device_states new_state; + struct sas_task *task = isci_request_access_task(ireq); + + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + break; + + if (task->ata_task.use_ncq) + new_state = SCI_STP_DEV_NCQ; + else { + idev->working_request = ireq; + new_state = SCI_STP_DEV_CMD; + } + sci_change_state(sm, new_state); + break; + } + case SCI_STP_DEV_NCQ: { + struct sas_task *task = isci_request_access_task(ireq); + + if (task->ata_task.use_ncq) { + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + } else + return SCI_FAILURE_INVALID_STATE; + break; + } + case SCI_STP_DEV_AWAIT_RESET: + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + case SCI_SMP_DEV_IDLE: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + break; + + idev->working_request = ireq; + sci_change_state(&idev->sm, SCI_SMP_DEV_CMD); + break; + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: + /* device is already handling a command it can not accept new commands + * until this one is complete. + */ + return SCI_FAILURE_INVALID_STATE; + } + + sci_remote_device_start_request(idev, ireq, status); + return status; +} + +static enum sci_status common_complete_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + status = sci_request_complete(ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_port_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + sci_remote_device_decrement_request_count(idev); + return status; +} + +enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_RESETTING: + status = common_complete_io(iport, idev, ireq); + break; + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + + if (ireq->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". + */ + sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); + } else if (idev->started_request_count == 0) + sci_change_state(sm, SCI_STP_DEV_IDLE); + break; + case SCI_SMP_DEV_CMD: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + sci_change_state(sm, SCI_SMP_DEV_IDLE); + break; + case SCI_DEV_STOPPING: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + + if (idev->started_request_count == 0) + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, + idev); + break; + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(idev), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", __func__, iport, + idev, ireq, status); + else + isci_put_device(idev); + + return status; +} + +static void sci_remote_device_continue_request(void *dev) +{ + struct isci_remote_device *idev = dev; + + /* we need to check if this request is still valid to continue. */ + if (idev->working_request) + sci_controller_continue_io(idev->working_request); +} + +enum sci_status sci_remote_device_start_task(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_task(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + goto out; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + goto out; + + /* Note: If the remote device state is not IDLE this will + * replace the request that probably resulted in the task + * management request. + */ + idev->working_request = ireq; + sci_change_state(sm, SCI_STP_DEV_CMD); + + /* The remote node context must cleanup the TCi to NCQ mapping + * table. The only way to do this correctly is to either write + * to the TLCR register or to invalidate and repost the RNC. In + * either case the remote node context state machine will take + * the correct action when the remote node context is suspended + * and later resumed. + */ + sci_remote_node_context_suspend(&idev->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + sci_remote_node_context_resume(&idev->rnc, + sci_remote_device_continue_request, + idev); + + out: + sci_remote_device_start_request(idev, ireq, status); + /* We need to let the controller start request handler know that + * it can't post TC yet. We will provide a callback function to + * post TC when RNC gets resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; + case SCI_DEV_READY: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_task(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + break; + } + sci_remote_device_start_request(idev, ireq, status); + + return status; +} + +void sci_remote_device_post_request(struct isci_remote_device *idev, u32 request) +{ + struct isci_port *iport = idev->owning_port; + u32 context; + + context = request | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + idev->rnc.remote_node_index; + + sci_controller_post_request(iport->owning_controller, context); +} + +/* called once the remote node context has transisitioned to a + * ready state. This is the indication that the remote device object can also + * transition to ready. + */ +static void remote_device_resume_done(void *_dev) +{ + struct isci_remote_device *idev = _dev; + + if (is_remote_device_ready(idev)) + return; + + /* go 'ready' if we are not already in a ready state */ + sci_change_state(&idev->sm, SCI_DEV_READY); +} + +static void sci_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) +{ + struct isci_remote_device *idev = _dev; + struct isci_host *ihost = idev->owning_port->owning_controller; + + /* For NCQ operation we do not issue a isci_remote_device_not_ready(). + * As a result, avoid sending the ready notification. + */ + if (idev->sm.previous_state_id != SCI_STP_DEV_NCQ) + isci_remote_device_ready(ihost, idev); +} + +static void sci_remote_device_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + /* Initial state is a transitional state to the stopped state */ + sci_change_state(&idev->sm, SCI_DEV_STOPPED); +} + +/** + * sci_remote_device_destruct() - free remote node context and destruct + * @remote_device: This parameter specifies the remote device to be destructed. + * + * Remote device objects are a limited resource. As such, they must be + * protected. Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. The return value shall indicate if the device was + * successfully destructed or if some failure occurred. enum sci_status This value + * is returned if the device is successfully destructed. + * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied + * device isn't valid (e.g. it's already been destoryed, the handle isn't + * valid, etc.). + */ +static enum sci_status sci_remote_device_destruct(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_host *ihost; + + if (state != SCI_DEV_STOPPED) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + ihost = idev->owning_port->owning_controller; + sci_controller_free_remote_node_context(ihost, idev, + idev->rnc.remote_node_index); + idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + sci_change_state(sm, SCI_DEV_FINAL); + + return SCI_SUCCESS; +} + +/** + * isci_remote_device_deconstruct() - This function frees an isci_remote_device. + * @ihost: This parameter specifies the isci host object. + * @idev: This parameter specifies the remote device to be freed. + * + */ +static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + /* There should not be any outstanding io's. All paths to + * here should go through isci_remote_device_nuke_requests. + * If we hit this condition, we will need a way to complete + * io requests in process */ + BUG_ON(!list_empty(&idev->reqs_in_process)); + + sci_remote_device_destruct(idev); + list_del_init(&idev->node); + isci_put_device(idev); +} + +static void sci_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + u32 prev_state; + + /* If we are entering from the stopping state let the SCI User know that + * the stop operation has completed. + */ + prev_state = idev->sm.previous_state_id; + if (prev_state == SCI_DEV_STOPPING) + isci_remote_device_deconstruct(ihost, idev); + + sci_controller_remote_device_stopped(ihost, idev); +} + +static void sci_remote_device_starting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); +} + +static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + struct domain_device *dev = idev->domain_dev; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { + sci_change_state(&idev->sm, SCI_STP_DEV_IDLE); + } else if (dev_is_expander(dev)) { + sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); + } else + isci_remote_device_ready(ihost, idev); +} + +static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct domain_device *dev = idev->domain_dev; + + if (dev->dev_type == SAS_END_DEV) { + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + } +} + +static void sci_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + sci_remote_node_context_suspend( + &idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); +} + +static void sci_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + sci_remote_node_context_resume(&idev->rnc, NULL, NULL); +} + +static void sci_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + idev->working_request = NULL; + if (sci_remote_node_context_is_ready(&idev->rnc)) { + /* + * Since the RNC is ready, it's alright to finish completion + * processing (e.g. signal the remote device is ready). */ + sci_stp_remote_device_ready_idle_substate_resume_complete_handler(idev); + } else { + sci_remote_node_context_resume(&idev->rnc, + sci_stp_remote_device_ready_idle_substate_resume_complete_handler, + idev); + } +} + +static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + BUG_ON(idev->working_request == NULL); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); +} + +static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + isci_remote_device_not_ready(ihost, idev, + idev->not_ready_reason); +} + +static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_ready(ihost, idev); +} + +static void sci_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + BUG_ON(idev->working_request == NULL); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); +} + +static void sci_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + idev->working_request = NULL; +} + +static const struct sci_base_state sci_remote_device_state_table[] = { + [SCI_DEV_INITIAL] = { + .enter_state = sci_remote_device_initial_state_enter, + }, + [SCI_DEV_STOPPED] = { + .enter_state = sci_remote_device_stopped_state_enter, + }, + [SCI_DEV_STARTING] = { + .enter_state = sci_remote_device_starting_state_enter, + }, + [SCI_DEV_READY] = { + .enter_state = sci_remote_device_ready_state_enter, + .exit_state = sci_remote_device_ready_state_exit + }, + [SCI_STP_DEV_IDLE] = { + .enter_state = sci_stp_remote_device_ready_idle_substate_enter, + }, + [SCI_STP_DEV_CMD] = { + .enter_state = sci_stp_remote_device_ready_cmd_substate_enter, + }, + [SCI_STP_DEV_NCQ] = { }, + [SCI_STP_DEV_NCQ_ERROR] = { + .enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter, + }, + [SCI_STP_DEV_AWAIT_RESET] = { }, + [SCI_SMP_DEV_IDLE] = { + .enter_state = sci_smp_remote_device_ready_idle_substate_enter, + }, + [SCI_SMP_DEV_CMD] = { + .enter_state = sci_smp_remote_device_ready_cmd_substate_enter, + .exit_state = sci_smp_remote_device_ready_cmd_substate_exit, + }, + [SCI_DEV_STOPPING] = { }, + [SCI_DEV_FAILED] = { }, + [SCI_DEV_RESETTING] = { + .enter_state = sci_remote_device_resetting_state_enter, + .exit_state = sci_remote_device_resetting_state_exit + }, + [SCI_DEV_FINAL] = { }, +}; + +/** + * sci_remote_device_construct() - common construction + * @sci_port: SAS/SATA port through which this device is accessed. + * @sci_dev: remote device to construct + * + * This routine just performs benign initialization and does not + * allocate the remote_node_context which is left to + * sci_remote_device_[de]a_construct(). sci_remote_device_destruct() + * frees the remote_node_context(s) for the device. + */ +static void sci_remote_device_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + idev->owning_port = iport; + idev->started_request_count = 0; + + sci_init_sm(&idev->sm, sci_remote_device_state_table, SCI_DEV_INITIAL); + + sci_remote_node_context_construct(&idev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +/** + * sci_remote_device_da_construct() - construct direct attached device. + * + * The information (e.g. IAF, Signature FIS, etc.) necessary to build + * the device is known to the SCI Core since it is contained in the + * sci_phy object. Remote node context(s) is/are a global resource + * allocated by this routine, freed by sci_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. + */ +static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + enum sci_status status; + struct domain_device *dev = idev->domain_dev; + + sci_remote_device_construct(iport, idev); + + /* + * This information is request to determine how many remote node context + * entries will be needed to store the remote node. + */ + idev->is_direct_attached = true; + status = sci_controller_allocate_remote_node_context(iport->owning_controller, + idev, + &idev->rnc.remote_node_index); + + if (status != SCI_SUCCESS) + return status; + + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + idev->connection_rate = sci_port_get_max_allowed_speed(iport); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + idev->device_port_width = 1; + + return SCI_SUCCESS; +} + +/** + * sci_remote_device_ea_construct() - construct expander attached device + * + * Remote node context(s) is/are a global resource allocated by this + * routine, freed by sci_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. + */ +static enum sci_status sci_remote_device_ea_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status; + + sci_remote_device_construct(iport, idev); + + status = sci_controller_allocate_remote_node_context(iport->owning_controller, + idev, + &idev->rnc.remote_node_index); + if (status != SCI_SUCCESS) + return status; + + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + idev->connection_rate = min_t(u16, sci_port_get_max_allowed_speed(iport), + dev->linkrate); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + idev->device_port_width = 1; + + return SCI_SUCCESS; +} + +/** + * sci_remote_device_start() - This method will start the supplied remote + * device. This method enables normal IO requests to flow through to the + * remote device. + * @remote_device: This parameter specifies the device to be started. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * An indication of whether the device was successfully started. SCI_SUCCESS + * This value is returned if the device was successfully started. + * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start + * the device when there have been no phys added to it. + */ +static enum sci_status sci_remote_device_start(struct isci_remote_device *idev, + u32 timeout) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + enum sci_status status; + + if (state != SCI_DEV_STOPPED) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_remote_node_context_resume(&idev->rnc, + remote_device_resume_done, + idev); + if (status != SCI_SUCCESS) + return status; + + sci_change_state(sm, SCI_DEV_STARTING); + + return SCI_SUCCESS; +} + +static enum sci_status isci_remote_device_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + struct isci_host *ihost = iport->isci_host; + struct domain_device *dev = idev->domain_dev; + enum sci_status status; + + if (dev->parent && dev_is_expander(dev->parent)) + status = sci_remote_device_ea_construct(iport, idev); + else + status = sci_remote_device_da_construct(iport, idev); + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", + __func__, status); + + return status; + } + + /* start the device. */ + status = sci_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT); + + if (status != SCI_SUCCESS) + dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", + status); + + return status; +} + +void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev) +{ + DECLARE_COMPLETION_ONSTACK(aborted_task_completion); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + + /* Cleanup all requests pending for this device. */ + isci_terminate_pending_requests(ihost, idev); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p, done\n", __func__, idev); +} + +/** + * This function builds the isci_remote_device when a libsas dev_found message + * is received. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the isci_port conected to this device. + * + * pointer to new isci_remote_device. + */ +static struct isci_remote_device * +isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) +{ + struct isci_remote_device *idev; + int i; + + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + idev = &ihost->devices[i]; + if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags)) + break; + } + + if (i >= SCI_MAX_REMOTE_DEVICES) { + dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__); + return NULL; + } + + if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n")) + return NULL; + + if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n")) + return NULL; + + return idev; +} + +void isci_remote_device_release(struct kref *kref) +{ + struct isci_remote_device *idev = container_of(kref, typeof(*idev), kref); + struct isci_host *ihost = idev->isci_port->isci_host; + + idev->domain_dev = NULL; + idev->isci_port = NULL; + clear_bit(IDEV_START_PENDING, &idev->flags); + clear_bit(IDEV_STOP_PENDING, &idev->flags); + clear_bit(IDEV_IO_READY, &idev->flags); + clear_bit(IDEV_GONE, &idev->flags); + clear_bit(IDEV_EH, &idev->flags); + smp_mb__before_clear_bit(); + clear_bit(IDEV_ALLOCATED, &idev->flags); + wake_up(&ihost->eventq); +} + +/** + * isci_remote_device_stop() - This function is called internally to stop the + * remote device. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device. + * + * The status of the ihost request to stop. + */ +enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) +{ + enum sci_status status; + unsigned long flags; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev->domain_dev->lldd_dev = NULL; /* disable new lookups */ + set_bit(IDEV_GONE, &idev->flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Kill all outstanding requests. */ + isci_remote_device_nuke_requests(ihost, idev); + + set_bit(IDEV_STOP_PENDING, &idev->flags); + + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_stop(idev, 50); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Wait for the stop complete callback. */ + if (WARN_ONCE(status != SCI_SUCCESS, "failed to stop device\n")) + /* nothing to wait for */; + else + wait_for_device_stop(ihost, idev); + + return status; +} + +/** + * isci_remote_device_gone() - This function is called by libsas when a domain + * device is removed. + * @domain_device: This parameter specifies the libsas domain device. + * + */ +void isci_remote_device_gone(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev = dev->lldd_dev; + + dev_dbg(&ihost->pdev->dev, + "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", + __func__, dev, idev, idev->isci_port); + + isci_remote_device_stop(ihost, idev); +} + + +/** + * isci_remote_device_found() - This function is called by libsas when a remote + * device is discovered. A remote device object is created and started. the + * function then sleeps until the sci core device started message is + * received. + * @domain_device: This parameter specifies the libsas domain device. + * + * status, zero indicates success. + */ +int isci_remote_device_found(struct domain_device *domain_dev) +{ + struct isci_host *isci_host = dev_to_ihost(domain_dev); + struct isci_port *isci_port; + struct isci_phy *isci_phy; + struct asd_sas_port *sas_port; + struct asd_sas_phy *sas_phy; + struct isci_remote_device *isci_device; + enum sci_status status; + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device = %p\n", __func__, domain_dev); + + wait_for_start(isci_host); + + sas_port = domain_dev->port; + sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, + port_phy_el); + isci_phy = to_iphy(sas_phy); + isci_port = isci_phy->isci_port; + + /* we are being called for a device on this port, + * so it has to come up eventually + */ + wait_for_completion(&isci_port->start_complete); + + if ((isci_stopping == isci_port_get_state(isci_port)) || + (isci_stopped == isci_port_get_state(isci_port))) + return -ENODEV; + + isci_device = isci_remote_device_alloc(isci_host, isci_port); + if (!isci_device) + return -ENODEV; + + kref_init(&isci_device->kref); + INIT_LIST_HEAD(&isci_device->node); + + spin_lock_irq(&isci_host->scic_lock); + isci_device->domain_dev = domain_dev; + isci_device->isci_port = isci_port; + list_add_tail(&isci_device->node, &isci_port->remote_dev_list); + + set_bit(IDEV_START_PENDING, &isci_device->flags); + status = isci_remote_device_construct(isci_port, isci_device); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + + if (status == SCI_SUCCESS) { + /* device came up, advertise it to the world */ + domain_dev->lldd_dev = isci_device; + } else + isci_put_device(isci_device); + spin_unlock_irq(&isci_host->scic_lock); + + /* wait for the device ready callback. */ + wait_for_device_start(isci_host, isci_device); + + return status == SCI_SUCCESS ? 0 : -ENODEV; +} +/** + * isci_device_is_reset_pending() - This function will check if there is any + * pending reset condition on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +bool isci_device_is_reset_pending( + struct isci_host *isci_host, + struct isci_remote_device *isci_device) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + bool reset_is_pending = false; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check for reset on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &isci_device->reqs_in_process, dev_node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, isci_device, isci_request); + + if (isci_request->ttype == io_task) { + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock(&task->task_state_lock); + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + reset_is_pending = true; + spin_unlock(&task->task_state_lock); + } + } + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p reset_is_pending = %d\n", + __func__, isci_device, reset_is_pending); + + return reset_is_pending; +} + +/** + * isci_device_clear_reset_pending() - This function will clear if any pending + * reset condition flags on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + unsigned long flags = 0; + + dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n", + __func__, idev, ihost); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* Clear reset pending on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &idev->reqs_in_process, dev_node) { + dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n", + __func__, idev, isci_request); + + if (isci_request->ttype == io_task) { + + unsigned long flags2; + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock_irqsave(&task->task_state_lock, flags2); + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags2); + } + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h new file mode 100644 index 000000000000..57ccfc3d6ad3 --- /dev/null +++ b/drivers/scsi/isci/remote_device.h @@ -0,0 +1,352 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REMOTE_DEVICE_H_ +#define _ISCI_REMOTE_DEVICE_H_ +#include <scsi/libsas.h> +#include <linux/kref.h> +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" + +enum sci_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX +}; + +/** + * isci_remote_device - isci representation of a sas expander / end point + * @device_port_width: hw setting for number of simultaneous connections + * @connection_rate: per-taskcontext connection rate for this device + * @working_request: SATA requests have no tag we for unaccelerated + * protocols we need a method to associate unsolicited + * frames with a pending request + */ +struct isci_remote_device { + #define IDEV_START_PENDING 0 + #define IDEV_STOP_PENDING 1 + #define IDEV_ALLOCATED 2 + #define IDEV_EH 3 + #define IDEV_GONE 4 + #define IDEV_IO_READY 5 + #define IDEV_IO_NCQERROR 6 + unsigned long flags; + struct kref kref; + struct isci_port *isci_port; + struct domain_device *domain_dev; + struct list_head node; + struct list_head reqs_in_process; + struct sci_base_state_machine sm; + u32 device_port_width; + enum sas_linkrate connection_rate; + bool is_direct_attached; + struct isci_port *owning_port; + struct sci_remote_node_context rnc; + /* XXX unify with device reference counting and delete */ + u32 started_request_count; + struct isci_request *working_request; + u32 not_ready_reason; +}; + +#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 + +/* device reference routines must be called under sci_lock */ +static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) +{ + struct isci_remote_device *idev = dev->lldd_dev; + + if (idev && !test_bit(IDEV_GONE, &idev->flags)) { + kref_get(&idev->kref); + return idev; + } + + return NULL; +} + +void isci_remote_device_release(struct kref *kref); +static inline void isci_put_device(struct isci_remote_device *idev) +{ + if (idev) + kref_put(&idev->kref, isci_remote_device_release); +} + +enum sci_status isci_remote_device_stop(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_nuke_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_gone(struct domain_device *domain_dev); +int isci_remote_device_found(struct domain_device *domain_dev); +bool isci_device_is_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_device_clear_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +/** + * sci_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status sci_remote_device_stop( + struct isci_remote_device *idev, + u32 timeout); + +/** + * sci_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status sci_remote_device_reset( + struct isci_remote_device *idev); + +/** + * sci_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status sci_remote_device_reset_complete( + struct isci_remote_device *idev); + +/** + * enum sci_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum sci_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_DEV_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_DEV_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_DEV_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_DEV_READY, + + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCI_STP_DEV_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCI_STP_DEV_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCI_STP_DEV_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCI_STP_DEV_NCQ_ERROR, + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCI_STP_DEV_AWAIT_RESET, + + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCI_SMP_DEV_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCI_SMP_DEV_CMD, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_DEV_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_DEV_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_DEV_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_DEV_FINAL, +}; + +static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) +{ + struct isci_remote_device *idev; + + idev = container_of(rnc, typeof(*idev), rnc); + + return idev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; +} + +static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) +{ + /* XXX delete this voodoo when converting to the top-level device + * reference count + */ + if (WARN_ONCE(idev->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + idev->started_request_count--; +} + +enum sci_status sci_remote_device_frame_handler( + struct isci_remote_device *idev, + u32 frame_index); + +enum sci_status sci_remote_device_event_handler( + struct isci_remote_device *idev, + u32 event_code); + +enum sci_status sci_remote_device_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_suspend( + struct isci_remote_device *idev, + u32 suspend_type); + +void sci_remote_device_post_request( + struct isci_remote_device *idev, + u32 request); + +#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c new file mode 100644 index 000000000000..748e8339d1ec --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.c @@ -0,0 +1,627 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "isci.h" +#include "remote_device.h" +#include "remote_node_context.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + + +/** + * + * @sci_rnc: The RNC for which the is posted request is being made. + * + * This method will return true if the RNC is not in the initial state. In all + * other states the RNC is considered active and this will return true. The + * destroy request of the state machine drives the RNC back to the initial + * state. If the state machine changes then this routine will also have to be + * changed. bool true if the state machine is not in the initial state false if + * the state machine is in the initial state + */ + +/** + * + * @sci_rnc: The state of the remote node context object to check. + * + * This method will return true if the remote node context is in a READY state + * otherwise it will return false bool true if the remote node context is in + * the ready state. false if the remote node context is not in the ready state. + */ +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc) +{ + u32 current_state = sci_rnc->sm.current_state_id; + + if (current_state == SCI_RNC_READY) { + return true; + } + + return false; +} + +static union scu_remote_node_context *sci_rnc_by_id(struct isci_host *ihost, u16 id) +{ + if (id < ihost->remote_node_entries && + ihost->device_table[id]) + return &ihost->remote_node_context_table[id]; + + return NULL; +} + +static void sci_remote_node_context_construct_buffer(struct sci_remote_node_context *sci_rnc) +{ + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + int rni = sci_rnc->remote_node_index; + union scu_remote_node_context *rnc; + struct isci_host *ihost; + __le64 sas_addr; + + ihost = idev->owning_port->owning_controller; + rnc = sci_rnc_by_id(ihost, rni); + + memset(rnc, 0, sizeof(union scu_remote_node_context) + * sci_remote_device_node_count(idev)); + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = idev->device_port_width; + rnc->ssp.logical_port_index = idev->owning_port->physical_port_index; + + /* sas address is __be64, context ram format is __le64 */ + sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr)); + rnc->ssp.remote_sas_address_hi = upper_32_bits(sas_addr); + rnc->ssp.remote_sas_address_lo = lower_32_bits(sas_addr); + + rnc->ssp.nexus_loss_timer_enable = true; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = false; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + + rnc->ssp.arbitration_wait_time = 0; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + rnc->ssp.connection_occupancy_timeout = + ihost->user_parameters.stp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + ihost->user_parameters.stp_inactivity_timeout; + } else { + rnc->ssp.connection_occupancy_timeout = + ihost->user_parameters.ssp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + ihost->user_parameters.ssp_inactivity_timeout; + } + + rnc->ssp.initial_arbitration_wait_time = 0; + + /* Open Address Frame Parameters */ + rnc->ssp.oaf_connection_rate = idev->connection_rate; + rnc->ssp.oaf_features = 0; + rnc->ssp.oaf_source_zone_group = 0; + rnc->ssp.oaf_more_compatibility_features = 0; +} + +/** + * + * @sci_rnc: + * @callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transition + * to its ready state. If the remote node context is already setup to + * transition to its final state then this function does nothing. none + */ +static void sci_remote_node_context_setup_to_resume( + struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + } +} + +static void sci_remote_node_context_setup_to_destory( + struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; +} + +/** + * + * + * This method just calls the user callback function and then resets the + * callback. + */ +static void sci_remote_node_context_notify_user( + struct sci_remote_node_context *rnc) +{ + if (rnc->user_callback != NULL) { + (*rnc->user_callback)(rnc->user_cookie); + + rnc->user_callback = NULL; + rnc->user_cookie = NULL; + } +} + +static void sci_remote_node_context_continue_state_transitions(struct sci_remote_node_context *rnc) +{ + if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + sci_remote_node_context_resume(rnc, rnc->user_callback, + rnc->user_cookie); +} + +static void sci_remote_node_context_validate_context_buffer(struct sci_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc_buffer; + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + struct isci_host *ihost = idev->owning_port->owning_controller; + + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); + + rnc_buffer->ssp.is_valid = true; + + if (!idev->is_direct_attached && + (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96); + } else { + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32); + + if (idev->is_direct_attached) + sci_port_setup_transports(idev->owning_port, + sci_rnc->remote_node_index); + } +} + +static void sci_remote_node_context_invalidate_context_buffer(struct sci_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc_buffer; + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct isci_host *ihost = idev->owning_port->owning_controller; + + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); + + rnc_buffer->ssp.is_valid = false; + + sci_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); +} + +static void sci_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + /* Check to see if we have gotten back to the initial state because + * someone requested to destroy the remote node context object. + */ + if (sm->previous_state_id == SCI_RNC_INVALIDATING) { + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + sci_remote_node_context_notify_user(rnc); + } +} + +static void sci_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm); + + sci_remote_node_context_validate_context_buffer(sci_rnc); +} + +static void sci_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_invalidate_context_buffer(rnc); +} + +static void sci_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct isci_remote_device *idev; + struct domain_device *dev; + + idev = rnc_to_dev(rnc); + dev = idev->domain_dev; + + /* + * For direct attached SATA devices we need to clear the TLCR + * NCQ to TCi tag mapping on the phy and in cases where we + * resume because of a target reset we also need to update + * the STPTLDARNI register with the RNi of the device + */ + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + idev->is_direct_attached) + sci_port_setup_transports(idev->owning_port, + rnc->remote_node_index); + + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); +} + +static void sci_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + if (rnc->user_callback) + sci_remote_node_context_notify_user(rnc); +} + +static void sci_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_continue_state_transitions(rnc); +} + +static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_continue_state_transitions(rnc); +} + +static const struct sci_base_state sci_remote_node_context_state_table[] = { + [SCI_RNC_INITIAL] = { + .enter_state = sci_remote_node_context_initial_state_enter, + }, + [SCI_RNC_POSTING] = { + .enter_state = sci_remote_node_context_posting_state_enter, + }, + [SCI_RNC_INVALIDATING] = { + .enter_state = sci_remote_node_context_invalidating_state_enter, + }, + [SCI_RNC_RESUMING] = { + .enter_state = sci_remote_node_context_resuming_state_enter, + }, + [SCI_RNC_READY] = { + .enter_state = sci_remote_node_context_ready_state_enter, + }, + [SCI_RNC_TX_SUSPENDED] = { + .enter_state = sci_remote_node_context_tx_suspended_state_enter, + }, + [SCI_RNC_TX_RX_SUSPENDED] = { + .enter_state = sci_remote_node_context_tx_rx_suspended_state_enter, + }, + [SCI_RNC_AWAIT_SUSPENSION] = { }, +}; + +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, + u16 remote_node_index) +{ + memset(rnc, 0, sizeof(struct sci_remote_node_context)); + + rnc->remote_node_index = remote_node_index; + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + sci_init_sm(&rnc->sm, sci_remote_node_context_state_table, SCI_RNC_INITIAL); +} + +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, + u32 event_code) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_POSTING: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_POST_RNC_COMPLETE: + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); + break; + default: + goto out; + } + break; + case SCI_RNC_INVALIDATING: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) + state = SCI_RNC_INITIAL; + else + state = SCI_RNC_POSTING; + sci_change_state(&sci_rnc->sm, state); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being invalidated anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being " + "invalidated.\n", __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCI_RNC_RESUMING: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being resumed anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being resumed.\n", + __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCI_RNC_READY: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + case SCI_RNC_AWAIT_SUSPENSION: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + + out: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: code: %#x state: %d\n", __func__, event_code, state); + return SCI_FAILURE; + +} + +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_INVALIDATING: + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + case SCI_RNC_POSTING: + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); + return SCI_SUCCESS; + case SCI_RNC_INITIAL: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + /* We have decided that the destruct request on the remote node context + * can not fail since it is either in the initial/destroyed state or is + * can be destroyed. + */ + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + if (state != SCI_RNC_READY) { + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + sci_rnc->suspension_code = suspend_type; + + if (suspend_type == SCI_SOFTWARE_SUSPENSION) { + sci_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); + } + + sci_change_state(&sci_rnc->sm, SCI_RNC_AWAIT_SUSPENSION); + return SCI_SUCCESS; +} + +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_INITIAL: + if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_STATE; + + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_construct_buffer(sci_rnc); + sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING); + return SCI_SUCCESS; + case SCI_RNC_POSTING: + case SCI_RNC_INVALIDATING: + case SCI_RNC_RESUMING: + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + return SCI_FAILURE_INVALID_STATE; + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: { + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + + /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ + if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (idev->is_direct_attached) { + /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + } else { + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); + } + } else + return SCI_FAILURE; + return SCI_SUCCESS; + } + case SCI_RNC_TX_RX_SUSPENDED: + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + return SCI_FAILURE_INVALID_STATE; + case SCI_RNC_AWAIT_SUSPENSION: + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + + switch (state) { + case SCI_RNC_READY: + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + default: + break; + } + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: requested to start IO while still resuming, %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_AWAIT_SUSPENSION: + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + sci_remote_node_context_resume(sci_rnc, NULL, NULL); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h new file mode 100644 index 000000000000..41580ad12520 --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.h @@ -0,0 +1,224 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ +#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ + +/** + * This file contains the structures, constants, and prototypes associated with + * the remote node context in the silicon. It exists to model and manage + * the remote node context in the silicon. + * + * + */ + +#include "isci.h" + +/** + * + * + * This constant represents an invalid remote device id, it is used to program + * the STPDARNI register so the driver knows when it has received a SIGNATURE + * FIS from the SCU. + */ +#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF + +#define SCU_HARDWARE_SUSPENSION (0) +#define SCI_SOFTWARE_SUSPENSION (1) + +struct isci_request; +struct isci_remote_device; +struct sci_remote_node_context; + +typedef void (*scics_sds_remote_node_context_callback)(void *); + +/** + * This is the enumeration of the remote node context states. + */ +enum scis_sds_remote_node_context_states { + /** + * This state is the initial state for a remote node context. On a resume + * request the remote node context will transition to the posting state. + */ + SCI_RNC_INITIAL, + + /** + * This is a transition state that posts the RNi to the hardware. Once the RNC + * is posted the remote node context will be made ready. + */ + SCI_RNC_POSTING, + + /** + * This is a transition state that will post an RNC invalidate to the + * hardware. Once the invalidate is complete the remote node context will + * transition to the posting state. + */ + SCI_RNC_INVALIDATING, + + /** + * This is a transition state that will post an RNC resume to the hardare. + * Once the event notification of resume complete is received the remote node + * context will transition to the ready state. + */ + SCI_RNC_RESUMING, + + /** + * This is the state that the remote node context must be in to accept io + * request operations. + */ + SCI_RNC_READY, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX suspend notification from the hardware. + */ + SCI_RNC_TX_SUSPENDED, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX RX suspend notification from the hardware. + */ + SCI_RNC_TX_RX_SUSPENDED, + + /** + * This state is a wait state for the remote node context that waits for a + * suspend notification from the hardware. This state is entered when either + * there is a request to supend the remote node context or when there is a TC + * completion where the remote node will be suspended by the hardware. + */ + SCI_RNC_AWAIT_SUSPENSION +}; + +/** + * + * + * This enumeration is used to define the end destination state for the remote + * node context. + */ +enum sci_remote_node_context_destination_state { + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL +}; + +/** + * struct sci_remote_node_context - This structure contains the data + * associated with the remote node context object. The remote node context + * (RNC) object models the the remote device information necessary to manage + * the silicon RNC. + */ +struct sci_remote_node_context { + /** + * This field indicates the remote node index (RNI) associated with + * this RNC. + */ + u16 remote_node_index; + + /** + * This field is the recored suspension code or the reason for the remote node + * context suspension. + */ + u32 suspension_code; + + /** + * This field is true if the remote node context is resuming from its current + * state. This can cause an automatic resume on receiving a suspension + * notification. + */ + enum sci_remote_node_context_destination_state destination_state; + + /** + * This field contains the callback function that the user requested to be + * called when the requested state transition is complete. + */ + scics_sds_remote_node_context_callback user_callback; + + /** + * This field contains the parameter that is called when the user requested + * state transition is completed. + */ + void *user_cookie; + + /** + * This field contains the data for the object's state machine. + */ + struct sci_base_state_machine sm; +}; + +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, + u16 remote_node_index); + + +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc); + +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, + u32 event_code); +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter); +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq); +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq); + +#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c new file mode 100644 index 000000000000..301b3141945e --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.c @@ -0,0 +1,598 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE + * public, protected, and private methods. + * + * + */ +#include "remote_node_table.h" +#include "remote_node_context.h" + +/** + * + * @remote_node_table: This is the remote node index table from which the + * selection will be made. + * @group_table_index: This is the index to the group table from which to + * search for an available selection. + * + * This routine will find the bit position in absolute bit terms of the next 32 + * + bit position. If there are available bits in the first u32 then it is + * just bit position. u32 This is the absolute bit position for an available + * group. + */ +static u32 sci_remote_node_table_get_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 dword_index; + u32 *group_table; + u32 bit_index; + + group_table = remote_node_table->remote_node_groups[group_table_index]; + + for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { + if (group_table[dword_index] != 0) { + for (bit_index = 0; bit_index < 32; bit_index++) { + if ((group_table[dword_index] & (1 << bit_index)) != 0) { + return (dword_index * 32) + bit_index; + } + } + } + } + + return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; +} + +/** + * + * @out]: remote_node_table This the remote node table in which to clear the + * selector. + * @set_index: This is the remote node selector in which the change will be + * made. + * @group_index: This is the bit index in the table to be modified. + * + * This method will clear the group index entry in the specified group index + * table. none + */ +static void sci_remote_node_table_clear_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); +} + +/** + * + * @out]: remote_node_table This the remote node table in which to set the + * selector. + * @group_table_index: This is the remote node selector in which the change + * will be made. + * @group_index: This is the bit position in the table to be modified. + * + * This method will set the group index bit entry in the specified gropu index + * table. none + */ +static void sci_remote_node_table_set_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] | (1 << bit_index); +} + +/** + * + * @out]: remote_node_table This is the remote node table in which to modify + * the remote node availability. + * @remote_node_index: This is the remote node index that is being returned to + * the table. + * + * This method will set the remote to available in the remote node allocation + * table. none + */ +static void sci_remote_node_table_set_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_normalized; + u32 slot_position; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] |= + 1 << (slot_normalized + slot_position); +} + +/** + * + * @out]: remote_node_table This is the remote node table from which to clear + * the available remote node bit. + * @remote_node_index: This is the remote node index which is to be cleared + * from the table. + * + * This method clears the remote node index from the table of available remote + * nodes. none + */ +static void sci_remote_node_table_clear_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_position; + u32 slot_normalized; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] &= + ~(1 << (slot_normalized + slot_position)); +} + +/** + * + * @out]: remote_node_table The remote node table from which the slot will be + * cleared. + * @group_index: The index for the slot that is to be cleared. + * + * This method clears the entire table slot at the specified slot index. none + */ +static void sci_remote_node_table_clear_group( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: + * + * THis method sets an entire remote node group in the remote node table. + */ +static void sci_remote_node_table_set_group( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: This is the remote node table that for which the group + * value is to be returned. + * @group_index: This is the group index to use to find the group value. + * + * This method will return the group value for the specified group index. The + * bit values at the specified remote node group index. + */ +static u8 sci_remote_node_table_get_group_value( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + dword_value = dword_value >> (dword_remainder * 4); + + return (u8)dword_value; +} + +/** + * + * @out]: remote_node_table The remote that which is to be initialized. + * @remote_node_entries: The number of entries to put in the table. + * + * This method will initialize the remote node table for use. none + */ +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_entries) +{ + u32 index; + + /* + * Initialize the raw data we could improve the speed by only initializing + * those entries that we are actually going to be used */ + memset( + remote_node_table->available_remote_nodes, + 0x00, + sizeof(remote_node_table->available_remote_nodes) + ); + + memset( + remote_node_table->remote_node_groups, + 0x00, + sizeof(remote_node_table->remote_node_groups) + ); + + /* Initialize the available remote node sets */ + remote_node_table->available_nodes_array_size = (u16) + (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); + + + /* Initialize each full DWORD to a FULL SET of remote nodes */ + for (index = 0; index < remote_node_entries; index++) { + sci_remote_node_table_set_node_index(remote_node_table, index); + } + + remote_node_table->group_array_size = (u16) + (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) + + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); + + for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { + /* + * These are all guaranteed to be full slot values so fill them in the + * available sets of 3 remote nodes */ + sci_remote_node_table_set_group_index(remote_node_table, 2, index); + } + + /* Now fill in any remainders that we may find */ + if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { + sci_remote_node_table_set_group_index(remote_node_table, 1, index); + } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { + sci_remote_node_table_set_group_index(remote_node_table, 0, index); + } +} + +/** + * + * @out]: remote_node_table The remote node table from which to allocate a + * remote node. + * @table_index: The group index that is to be used for the search. + * + * This method will allocate a single RNi from the remote node table. The + * table index will determine from which remote node group table to search. + * This search may fail and another group node table can be specified. The + * function is designed to allow a serach of the available single remote node + * group up to the triple remote node group. If an entry is found in the + * specified table the remote node is removed and the remote node groups are + * updated. The RNi value or an invalid remote node context if an RNi can not + * be found. + */ +static u16 sci_remote_node_table_allocate_single_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u8 index; + u8 group_value; + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = sci_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + /* We could not find an available slot in the table selector 0 */ + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + group_value = sci_remote_node_table_get_group_value( + remote_node_table, group_index); + + for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { + if (((1 << index) & group_value) != 0) { + /* We have selected a bit now clear it */ + remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT + + index); + + sci_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + sci_remote_node_table_clear_node_index( + remote_node_table, remote_node_index + ); + + if (group_table_index > 0) { + sci_remote_node_table_set_group_index( + remote_node_table, group_table_index - 1, group_index + ); + } + + break; + } + } + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which to allocate the + * remote node entries. + * @group_table_index: THis is the group table index which must equal two (2) + * for this operation. + * + * This method will allocate three consecutive remote node context entries. If + * there are no remaining triple entries the function will return a failure. + * The remote node index that represents three consecutive remote node entries + * or an invalid remote node context if none can be found. + */ +static u16 sci_remote_node_table_allocate_triple_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = sci_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; + + sci_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + sci_remote_node_table_clear_group( + remote_node_table, group_index + ); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which the remote node + * allocation is to take place. + * @remote_node_count: This is ther remote node count which is one of + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). + * + * This method will allocate a remote node that mataches the remote node count + * specified by the caller. Valid values for remote node count is + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is + * the remote node index that is returned or an invalid remote node context. + */ +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count) +{ + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 0); + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 1); + } + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 2); + } + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + remote_node_index = + sci_remote_node_table_allocate_triple_remote_node( + remote_node_table, 2); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: + * + * This method will free a single remote node index back to the remote node + * table. This routine will update the remote node groups + */ +static void sci_remote_node_table_release_single_remote_node( + struct sci_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + u8 group_value; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + group_value = sci_remote_node_table_get_group_value(remote_node_table, group_index); + + /* + * Assert that we are not trying to add an entry to a slot that is already + * full. */ + BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); + + if (group_value == 0x00) { + /* + * There are no entries in this slot so it must be added to the single + * slot table. */ + sci_remote_node_table_set_group_index(remote_node_table, 0, group_index); + } else if ((group_value & (group_value - 1)) == 0) { + /* + * There is only one entry in this slot so it must be moved from the + * single slot table to the dual slot table */ + sci_remote_node_table_clear_group_index(remote_node_table, 0, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 1, group_index); + } else { + /* + * There are two entries in the slot so it must be moved from the dual + * slot table to the tripple slot table. */ + sci_remote_node_table_clear_group_index(remote_node_table, 1, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 2, group_index); + } + + sci_remote_node_table_set_node_index(remote_node_table, remote_node_index); +} + +/** + * + * @remote_node_table: This is the remote node table to which the remote node + * index is to be freed. + * + * This method will release a group of three consecutive remote nodes back to + * the free remote nodes. + */ +static void sci_remote_node_table_release_triple_remote_node( + struct sci_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + sci_remote_node_table_set_group_index( + remote_node_table, 2, group_index + ); + + sci_remote_node_table_set_group(remote_node_table, group_index); +} + +/** + * + * @remote_node_table: The remote node table to which the remote node index is + * to be freed. + * @remote_node_count: This is the count of consecutive remote nodes that are + * to be freed. + * + * This method will release the remote node index back into the remote node + * table free pool. + */ +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index) +{ + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + sci_remote_node_table_release_single_remote_node( + remote_node_table, remote_node_index); + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + sci_remote_node_table_release_triple_remote_node( + remote_node_table, remote_node_index); + } +} + diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h new file mode 100644 index 000000000000..721ab982d2ac --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.h @@ -0,0 +1,188 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ +#define _SCIC_SDS_REMOTE_NODE_TABLE_H_ + +#include "isci.h" + +/** + * + * + * Remote node sets are sets of remote node index in the remtoe node table The + * SCU hardware requires that STP remote node entries take three consecutive + * remote node index so the table is arranged in sets of three. The bits are + * used as 0111 0111 to make a byte and the bits define the set of three remote + * nodes to use as a sequence. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2 + +/** + * + * + * Since the remote node table is organized as DWORDS take the remote node sets + * in bytes and represent them in DWORDs. The lowest ordered bits are the ones + * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111 + * 0111 0111 0111 // if only a single WORD is in use in the DWORD. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) +/** + * + * + * This is a count of the numeber of remote nodes that can be represented in a + * byte + */ +#define SCIC_SDS_REMOTE_NODES_PER_BYTE \ + (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) + +/** + * + * + * This is a count of the number of remote nodes that can be represented in a + * DWROD + */ +#define SCIC_SDS_REMOTE_NODES_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE) + +/** + * + * + * This is the number of bits in a remote node group + */ +#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4 + +#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF) +#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07) +#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00) + +/** + * + * + * Expander attached sata remote node count + */ +#define SCU_STP_REMOTE_NODE_COUNT 3 + +/** + * + * + * Expander or direct attached ssp remote node count + */ +#define SCU_SSP_REMOTE_NODE_COUNT 1 + +/** + * + * + * Direct attached STP remote node count + */ +#define SCU_SATA_REMOTE_NODE_COUNT 1 + +/** + * struct sci_remote_node_table - + * + * + */ +struct sci_remote_node_table { + /** + * This field contains the array size in dwords + */ + u16 available_nodes_array_size; + + /** + * This field contains the array size of the + */ + u16 group_array_size; + + /** + * This field is the array of available remote node entries in bits. + * Because of the way STP remote node data is allocated on the SCU hardware + * the remote nodes must occupy three consecutive remote node context + * entries. For ease of allocation and de-allocation we have broken the + * sets of three into a single nibble. When the STP RNi is allocated all + * of the bits in the nibble are cleared. This math results in a table size + * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte. + */ + u32 available_remote_nodes[ + (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)]; + + /** + * This field is the nibble selector for the above table. There are three + * possible selectors each for fast lookup when trying to find one, two or + * three remote node entries. + */ + u32 remote_node_groups[ + SCU_STP_REMOTE_NODE_COUNT][ + (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT)) + + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)]; + +}; + +/* --------------------------------------------------------------------------- */ + +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_entries); + +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count); + +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index); + +#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c new file mode 100644 index 000000000000..a46e07ac789f --- /dev/null +++ b/drivers/scsi/isci/request.c @@ -0,0 +1,3391 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "task.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "sas.h" + +static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq, + int idx) +{ + if (idx == 0) + return &ireq->tc->sgl_pair_ab; + else if (idx == 1) + return &ireq->tc->sgl_pair_cd; + else if (idx < 0) + return NULL; + else + return &ireq->sg_table[idx - 2]; +} + +static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost, + struct isci_request *ireq, u32 idx) +{ + u32 offset; + + if (idx == 0) { + offset = (void *) &ireq->tc->sgl_pair_ab - + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; + } else if (idx == 1) { + offset = (void *) &ireq->tc->sgl_pair_cd - + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; + } + + return sci_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); +} + +static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) +{ + e->length = sg_dma_len(sg); + e->address_upper = upper_32_bits(sg_dma_address(sg)); + e->address_lower = lower_32_bits(sg_dma_address(sg)); + e->address_modifier = 0; +} + +static void sci_request_build_sgl(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->isci_host; + struct sas_task *task = isci_request_access_task(ireq); + struct scatterlist *sg = NULL; + dma_addr_t dma_addr; + u32 sg_idx = 0; + struct scu_sgl_element_pair *scu_sg = NULL; + struct scu_sgl_element_pair *prev_sg = NULL; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (sg) { + scu_sg = to_sgl_element_pair(ireq, sg_idx); + init_sgl_element(&scu_sg->A, sg); + sg = sg_next(sg); + if (sg) { + init_sgl_element(&scu_sg->B, sg); + sg = sg_next(sg); + } else + memset(&scu_sg->B, 0, sizeof(scu_sg->B)); + + if (prev_sg) { + dma_addr = to_sgl_element_pair_dma(ihost, + ireq, + sg_idx); + + prev_sg->next_pair_upper = + upper_32_bits(dma_addr); + prev_sg->next_pair_lower = + lower_32_bits(dma_addr); + } + + prev_sg = scu_sg; + sg_idx++; + } + } else { /* handle when no sg */ + scu_sg = to_sgl_element_pair(ireq, sg_idx); + + dma_addr = dma_map_single(&ihost->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir); + + ireq->zero_scatter_daddr = dma_addr; + + scu_sg->A.length = task->total_xfer_len; + scu_sg->A.address_upper = upper_32_bits(dma_addr); + scu_sg->A.address_lower = lower_32_bits(dma_addr); + } + + if (scu_sg) { + scu_sg->next_pair_upper = 0; + scu_sg->next_pair_lower = 0; + } +} + +static void sci_io_request_build_ssp_command_iu(struct isci_request *ireq) +{ + struct ssp_cmd_iu *cmd_iu; + struct sas_task *task = isci_request_access_task(ireq); + + cmd_iu = &ireq->ssp.cmd; + + memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); + cmd_iu->add_cdb_len = 0; + cmd_iu->_r_a = 0; + cmd_iu->_r_b = 0; + cmd_iu->en_fburst = 0; /* unsupported */ + cmd_iu->task_prio = task->ssp_task.task_prio; + cmd_iu->task_attr = task->ssp_task.task_attr; + cmd_iu->_r_c = 0; + + sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb, + sizeof(task->ssp_task.cdb) / sizeof(u32)); +} + +static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq) +{ + struct ssp_task_iu *task_iu; + struct sas_task *task = isci_request_access_task(ireq); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + task_iu = &ireq->ssp.tmf; + + memset(task_iu, 0, sizeof(struct ssp_task_iu)); + + memcpy(task_iu->LUN, task->ssp_task.LUN, 8); + + task_iu->task_func = isci_tmf->tmf_code; + task_iu->task_tag = + (ireq->ttype == tmf_task) ? + isci_tmf->io_tag : + SCI_CONTROLLER_INVALID_IO_TAG; +} + +/** + * This method is will fill in the SCU Task Context for any type of SSP request. + * @sci_req: + * @task_context: + * + */ +static void scu_ssp_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + /* task_context->type.ssp.tag = ireq->io_tag; */ + task_context->task_phase = 0x01; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + + /* + * Copy the physical address for the command buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* + * Copy the physical address for the response buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); + + task_context->response_iu_upper = upper_32_bits(dma_addr); + task_context->response_iu_lower = lower_32_bits(dma_addr); +} + +/** + * This method is will fill in the SCU Task Context for a SSP IO request. + * @sci_req: + * + */ +static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, + enum dma_data_direction dir, + u32 len) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->ssp_command_iu_length = + sizeof(struct ssp_cmd_iu) / sizeof(u32); + task_context->type.ssp.frame_type = SSP_COMMAND; + + switch (dir) { + case DMA_FROM_DEVICE: + case DMA_NONE: + default: + task_context->task_type = SCU_TASK_TYPE_IOREAD; + break; + case DMA_TO_DEVICE: + task_context->task_type = SCU_TASK_TYPE_IOWRITE; + break; + } + + task_context->transfer_length_bytes = len; + + if (task_context->transfer_length_bytes > 0) + sci_request_build_sgl(ireq); +} + +/** + * This method will fill in the SCU Task Context for a SSP Task request. The + * following important settings are utilized: -# priority == + * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued + * ahead of other task destined for the same Remote Node. -# task_type == + * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a task frame. + * @sci_req: This parameter specifies the task request object being + * constructed. + * + */ +static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 1; + task_context->priority = SCU_TASK_PRIORITY_HIGH; + task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; + task_context->transfer_length_bytes = 0; + task_context->type.ssp.frame_type = SSP_TASK; + task_context->ssp_command_iu_length = + sizeof(struct ssp_task_iu) / sizeof(u32); +} + +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @sci_req: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = sci_io_request_get_dma_addr(ireq, + ((char *) &ireq->stp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_sata_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = FIS_REGH2D; + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); +} + +static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq, + bool copy_rx_frame) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + + scu_stp_raw_request_construct_task_context(ireq); + + stp_req->status = 0; + stp_req->sgl.offset = 0; + stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; + + if (copy_rx_frame) { + sci_request_build_sgl(ireq); + stp_req->sgl.index = 0; + } else { + /* The user does not want the data copied to the SGL buffer location */ + stp_req->sgl.index = -1; + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. + */ +static void sci_stp_optimized_request_construct(struct isci_request *ireq, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) +{ + struct scu_task_context *task_context = ireq->tc; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(ireq, task_context); + + /* Copy over the SGL elements */ + sci_request_build_sgl(ireq); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = len; + + if (dir == DMA_TO_DEVICE) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + + + +static enum sci_status +sci_io_request_construct_sata(struct isci_request *ireq, + u32 len, + enum dma_data_direction dir, + bool copy) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(ireq); + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + scu_stp_raw_request_construct_task_context(ireq); + return SCI_SUCCESS; + } else { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); + + return SCI_FAILURE; + } + } + + if (!sas_protocol_ata(task->task_proto)) { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Non-ATA protocol in SATA path: 0x%x\n", + __func__, + task->task_proto); + return SCI_FAILURE; + + } + + /* non data */ + if (task->data_dir == DMA_NONE) { + scu_stp_raw_request_construct_task_context(ireq); + return SCI_SUCCESS; + } + + /* NCQ */ + if (task->ata_task.use_ncq) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); + return SCI_SUCCESS; + } + + /* DMA */ + if (task->ata_task.dma_xfer) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_DMA_IN, + len, dir); + return SCI_SUCCESS; + } else /* PIO */ + return sci_stp_pio_request_construct(ireq, copy); + + return status; +} + +static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SCIC_SSP_PROTOCOL; + + scu_ssp_io_request_construct_task_context(ireq, + task->data_dir, + task->total_xfer_len); + + sci_io_request_build_ssp_command_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +enum sci_status sci_task_request_construct_ssp( + struct isci_request *ireq) +{ + /* Construct the SSP Task SCU Task Context */ + scu_ssp_task_request_construct_task_context(ireq); + + /* Fill in the SSP Task IU */ + sci_task_request_build_ssp_task_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *ireq) +{ + enum sci_status status; + bool copy = false; + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SCIC_STP_PROTOCOL; + + copy = (task->data_dir == DMA_NONE) ? false : true; + + status = sci_io_request_construct_sata(ireq, + task->total_xfer_len, + task->data_dir, + copy); + + if (status == SCI_SUCCESS) + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return status; +} + +enum sci_status sci_task_request_construct_sata(struct isci_request *ireq) +{ + enum sci_status status = SCI_SUCCESS; + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + scu_stp_raw_request_construct_task_context(ireq); + } else { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "Protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); + + return SCI_FAILURE; + } + } + + if (status != SCI_SUCCESS) + return status; + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return status; +} + +/** + * sci_req_tx_bytes - bytes transferred when reply underruns request + * @sci_req: request that was terminated early + */ +#define SCU_TASK_CONTEXT_SRAM 0x200000 +static u32 sci_req_tx_bytes(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->owning_controller; + u32 ret_val = 0; + + if (readl(&ihost->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = ihost->scu_registers; + + /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where + * BAR1 is the scu_registers + * 0x20002C = 0x200000 + 0x2c + * = start of task context SRAM + offset of (type.ssp.data_offset) + * TCi is the io_tag of struct sci_request + */ + ret_val = readl(scu_reg_base + + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(ireq->io_tag))); + } + + return ret_val; +} + +enum sci_status sci_request_start(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct scu_task_context *tc = ireq->tc; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (state != SCI_REQ_CONSTRUCTED) { + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + tc->task_index = ISCI_TAG_TCI(ireq->io_tag); + + switch (tc->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + tc->type.ssp.tag = ireq->io_tag; + tc->type.ssp.target_port_transfer_tag = 0xFFFF; + break; + + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* STP/SATA Frame + * tc->type.stp.ncq_tag = ireq->ncq_tag; + */ + break; + + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; + + default: + /* This should never happen since we build the IO + * requests */ + break; + } + + /* Add to the post_context the io tag value */ + ireq->post_context |= ISCI_TAG_TCI(ireq->io_tag); + + /* Everything is good go ahead and change state */ + sci_change_state(&ireq->sm, SCI_REQ_STARTED); + + return SCI_SUCCESS; +} + +enum sci_status +sci_io_request_terminate(struct isci_request *ireq) +{ + enum sci_base_request_states state; + + state = ireq->sm.current_state_id; + + switch (state) { + case SCI_REQ_CONSTRUCTED: + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_STARTED: + case SCI_REQ_TASK_WAIT_TC_COMP: + case SCI_REQ_SMP_WAIT_RESP: + case SCI_REQ_SMP_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_D2H: + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + case SCI_REQ_STP_NON_DATA_WAIT_D2H: + case SCI_REQ_STP_PIO_WAIT_H2D: + case SCI_REQ_STP_PIO_WAIT_FRAME: + case SCI_REQ_STP_PIO_DATA_IN: + case SCI_REQ_STP_PIO_DATA_OUT: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + return SCI_SUCCESS; + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_ABORTING: + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_COMPLETED: + default: + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", + __func__, + ireq->sm.current_state_id); + break; + } + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status sci_request_complete(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (WARN_ONCE(state != SCI_REQ_COMPLETED, + "isci: request completion from wrong state (%d)\n", state)) + return SCI_FAILURE_INVALID_STATE; + + if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) + sci_controller_release_frame(ihost, + ireq->saved_rx_frame_index); + + /* XXX can we just stop the machine and remove the 'final' state? */ + sci_change_state(&ireq->sm, SCI_REQ_FINAL); + return SCI_SUCCESS; +} + +enum sci_status sci_io_request_event_handler(struct isci_request *ireq, + u32 event_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + if (state != SCI_REQ_STP_PIO_DATA_IN) { + dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n", + __func__, event_code, state); + + return SCI_FAILURE_INVALID_STATE; + } + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + return SCI_SUCCESS; + default: + dev_err(&ihost->pdev->dev, + "%s: pio request unexpected event %#x\n", + __func__, event_code); + + /* TODO Should we fail the PIO request when we get an + * unexpected event? + */ + return SCI_FAILURE; + } +} + +/* + * This function copies response data for requests returning response data + * instead of sense data. + * @sci_req: This parameter specifies the request object for which to copy + * the response data. + */ +static void sci_io_request_copy_response(struct isci_request *ireq) +{ + void *resp_buf; + u32 len; + struct ssp_response_iu *ssp_response; + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + ssp_response = &ireq->ssp.rsp; + + resp_buf = &isci_tmf->resp.resp_iu; + + len = min_t(u32, + SSP_RESP_IU_MAX_SIZE, + be32_to_cpu(ssp_response->response_data_len)); + + memcpy(resp_buf, ssp_response->resp_data, len); +} + +static enum sci_status +request_started_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + struct ssp_response_iu *resp_iu; + u8 datapres; + + /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000 + * to determine SDMA status + */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { + /* There are times when the SCU hardware will return an early + * response because the io request specified more data than is + * returned by the target device (mode pages, inquiry data, + * etc.). We must check the response stats to see if this is + * truly a failed request or a good request that just got + * completed early. + */ + struct ssp_response_iu *resp = &ireq->ssp.rsp; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + if (resp->status == 0) { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY; + } else { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } + break; + } + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): { + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + } + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): + /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame + * guaranteed to be received before this completion status is + * posted? + */ + resp_iu = &ireq->ssp.rsp; + datapres = resp_iu->datapres; + + if (datapres == 1 || datapres == 2) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + break; + /* only stp device gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): + if (ireq->protocol == SCIC_STP_PROTOCOL) { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + } else { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } + break; + + /* both stp/ssp device gets suspended */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + break; + + /* neither ssp nor stp gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): + default: + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + break; + } + + /* + * TODO: This is probably wrong for ACK/NAK timeout conditions + */ + + /* In all cases we will treat this as the completion of the IO req. */ + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; +} + +static enum sci_status +request_aborting_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? + */ + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* Currently, the decision is to simply allow the task request + * to timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if + * we decide to send the task IU again. + */ + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", __func__, ireq, + completion_code); + + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_response_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* In the AWAIT RESPONSE state, any TC completion is + * unexpected. but if the TC has success status, we + * complete the IO anyway. + */ + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* These status has been seen in a specific LSI + * expander, which sometimes is not able to send smp + * response within 2 ms. This causes our hardware break + * the connection and set TC completion with one of + * these SMP_XXX_XX_ERR status. For these type of error, + * we ask ihost user to retry the request. + */ + ireq->scu_status = SCU_TASK_DONE_SMP_RESP_TO_ERR; + ireq->sci_status = SCI_FAILURE_RETRY_REQUIRED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) +{ + struct scu_sgl_element *sgl; + struct scu_sgl_element_pair *sgl_pair; + struct isci_request *ireq = to_ireq(stp_req); + struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl; + + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + if (!sgl_pair) + sgl = NULL; + else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) { + if (sgl_pair->B.address_lower == 0 && + sgl_pair->B.address_upper == 0) { + sgl = NULL; + } else { + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_B; + sgl = &sgl_pair->B; + } + } else { + if (sgl_pair->next_pair_lower == 0 && + sgl_pair->next_pair_upper == 0) { + sgl = NULL; + } else { + pio_sgl->index++; + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A; + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + sgl = &sgl_pair->A; + } + } + + return sgl; +} + +static enum sci_status +stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/* transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + */ +static enum sci_status sci_stp_request_pio_data_out_trasmit_data_frame( + struct isci_request *ireq, + u32 length) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_task_context *task_context = ireq->tc; + struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *current_sgl; + + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &sgl_pair->A; + else + current_sgl = &sgl_pair->B; + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = FIS_DATA; + + /* send the new TC out. */ + return sci_controller_continue_io(ireq); +} + +static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *sgl; + enum sci_status status; + u32 offset; + u32 len = 0; + + offset = stp_req->sgl.offset; + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) + return SCI_FAILURE; + + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) { + sgl = &sgl_pair->A; + len = sgl_pair->A.length - offset; + } else { + sgl = &sgl_pair->B; + len = sgl_pair->B.length - offset; + } + + if (stp_req->pio_len == 0) + return SCI_SUCCESS; + + if (stp_req->pio_len >= len) { + status = sci_stp_request_pio_data_out_trasmit_data_frame(ireq, len); + if (status != SCI_SUCCESS) + return status; + stp_req->pio_len -= len; + + /* update the current sgl, offset and save for future */ + sgl = pio_sgl_next(stp_req); + offset = 0; + } else if (stp_req->pio_len < len) { + sci_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); + + /* Sgl offset will be adjusted and saved for future */ + offset += stp_req->pio_len; + sgl->address_lower += stp_req->pio_len; + stp_req->pio_len = 0; + } + + stp_req->sgl.offset = offset; + + return status; +} + +/** + * + * @stp_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status +sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, + u8 *data_buf, u32 len) +{ + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + ireq = to_ireq(stp_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page, KM_IRQ0); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr, KM_IRQ0); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); + } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status sci_stp_request_pio_data_in_copy_data( + struct isci_stp_request *stp_req, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) { + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, stp_req->pio_len); + + if (status == SCI_SUCCESS) + stp_req->pio_len = 0; + } else { + /* We are transfering the whole frame so copy */ + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + stp_req->pio_len -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +static enum sci_status +stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status +pio_data_out_tx_done_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct isci_stp_request *stp_req = &ireq->stp.req; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->pio_len != 0) { + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status == SCI_SUCCESS) { + if (stp_req->pio_len == 0) + all_frames_transferred = true; + } + } else if (stp_req->pio_len == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCI_REQ_STP_PIO_DATA_IN + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + } + + sci_controller_release_frame(ihost, frame_index); + + return status; +} + +enum sci_status +sci_io_request_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct isci_stp_request *stp_req = &ireq->stp.req; + enum sci_base_request_states state; + enum sci_status status; + ssize_t word_cnt; + + state = ireq->sm.current_state_id; + switch (state) { + case SCI_REQ_STARTED: { + struct ssp_frame_hdr ssp_hdr; + void *frame_header; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { + struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&resp_iu); + + sci_swab32_cpy(&ireq->ssp.rsp, resp_iu, word_cnt); + + resp_iu = &ireq->ssp.rsp; + + if (resp_iu->datapres == 0x01 || + resp_iu->datapres == 0x02) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + } else { + /* not a response frame, why did it get forwarded? */ + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", __func__, ireq, + frame_index, ssp_hdr.frame_type); + } + + /* + * In any case we are done with this frame buffer return it to + * the controller + */ + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_io_request_copy_response(ireq); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + case SCI_REQ_SMP_WAIT_RESP: { + struct smp_resp *rsp_hdr = &ireq->smp.rsp; + void *frame_header; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + + /* byte swap the header. */ + word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + &smp_resp); + + word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); + } else { + /* + * This was not a response frame why did it get + * forwarded? + */ + dev_err(&ihost->pdev->dev, + "%s: SCIC SMP Request 0x%p received unexpected " + "frame %d type 0x%02x\n", + __func__, + ireq, + frame_index, + rsp_hdr->frame_type); + + ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } + + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return sci_stp_request_udma_general_frame_handler(ireq, + frame_index); + + case SCI_REQ_STP_UDMA_WAIT_D2H: + /* Use the general frame handler to copy the resposne data */ + status = sci_stp_request_udma_general_frame_handler(ireq, frame_index); + + if (status != SCI_SUCCESS) + return status; + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + + case SCI_REQ_STP_NON_DATA_WAIT_D2H: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; + break; + } + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_WAIT_FRAME: { + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware + * returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to + * back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->pio_len = frame_buffer[3] & 0xffff; + + /* status: 4th byte in the 3rd dword */ + stp_req->status = (frame_buffer[2] >> 24) & 0xff; + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + ireq->stp.rsp.status = stp_req->status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status != SCI_SUCCESS) + break; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT); + } + break; + + case FIS_SETDEVBITS: + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* + * Now why is the drive sending a D2H Register + * FIS when it is still busy? Do nothing since + * we are still in the right state. + */ + dev_dbg(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", + __func__, + stp_req, + frame_header->status); + break; + } + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.req, + frame_header, + frame_buffer); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_DATA_IN: { + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + return status; + } + + if (frame_header->fis_type != FIS_DATA) { + dev_err(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", + __func__, + stp_req, + frame_index, + frame_header->fis_type); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + return status; + } + + if (stp_req->sgl.index < 0) { + ireq->saved_rx_frame_index = frame_index; + stp_req->pio_len = 0; + } else { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + status = sci_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || stp_req->pio_len != 0) + return status; + + if ((stp_req->status & ATA_BUSY) == 0) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + return status; + } + + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", + __func__, + stp_req, + frame_index); + + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; + break; + } + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + case SCI_REQ_ABORTING: + /* + * TODO: Is it even possible to get an unsolicited frame in the + * aborting state? + */ + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request given unexpected frame %x while " + "in state %d\n", + __func__, + frame_index, + state); + + sci_controller_release_frame(ihost, frame_index); + return SCI_FAILURE_INVALID_STATE; + } +} + +static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* We must check ther response buffer to see if the D2H + * Register FIS was received before we got the TC + * completion. + */ + if (ireq->stp.rsp.fis_type == FIS_REGD2H) { + sci_remote_device_suspend(ireq->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + /* If we have an error completion status for the + * TC then we can expect a D2H register FIS from + * the device so we must change state to wait + * for it + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_UDMA_WAIT_D2H); + } + break; + + /* TODO Check to see if any of these completion status need to + * wait for the device to host register fis. + */ + /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR + * - this comes only for B0 + */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): + sci_remote_device_suspend(ireq->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + /* Fall through to the default case */ + default: + /* All other completion status cause the IO to be complete. */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status +stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); + break; + + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); + break; + + default: + /* All other completion status cause the IO to be complete. If + * a NAK was received, then it is up to the user to retry the + * request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +enum sci_status +sci_io_request_tc_completion(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + switch (state) { + case SCI_REQ_STARTED: + return request_started_state_tc_event(ireq, completion_code); + + case SCI_REQ_TASK_WAIT_TC_COMP: + return ssp_task_request_await_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_RESP: + return smp_request_await_response_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_TC_COMP: + return smp_request_await_tc_event(ireq, completion_code); + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return stp_request_udma_await_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + return stp_request_non_data_await_h2d_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_WAIT_H2D: + return stp_request_pio_await_h2d_completion_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_DATA_OUT: + return pio_data_out_tx_done_tc_event(ireq, completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + return stp_request_soft_reset_await_h2d_asserted_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + return stp_request_soft_reset_await_h2d_diagnostic_tc_event(ireq, + completion_code); + + case SCI_REQ_ABORTING: + return request_aborting_state_tc_event(ireq, + completion_code); + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request given task completion " + "notification %x while in wrong state %d\n", + __func__, + completion_code, + state); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * isci_request_process_response_iu() - This function sets the status and + * response iu, in the task struct, from the request object for the upper + * layer driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @resp_iu: This parameter points to the response iu of the completed request. + * @dev: This parameter specifies the linux device struct. + * + * none. + */ +static void isci_request_process_response_iu( + struct sas_task *task, + struct ssp_response_iu *resp_iu, + struct device *dev) +{ + dev_dbg(dev, + "%s: resp_iu = %p " + "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " + "resp_iu->response_data_len = %x, " + "resp_iu->sense_data_len = %x\nrepsonse data: ", + __func__, + resp_iu, + resp_iu->status, + resp_iu->datapres, + resp_iu->response_data_len, + resp_iu->sense_data_len); + + task->task_status.stat = resp_iu->status; + + /* libsas updates the task status fields based on the response iu. */ + sas_ssp_task_response(dev, task, resp_iu); +} + +/** + * isci_request_set_open_reject_status() - This function prepares the I/O + * completion for OPEN_REJECT conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * @open_rej_reason: This parameter specifies the encoded reason for the + * abandon-class reject. + * + * none. + */ +static void isci_request_set_open_reject_status( + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr, + enum sas_open_rej_reason open_rej_reason) +{ + /* Task in the target is done. */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAS_OPEN_REJECT; + *complete_to_host_ptr = isci_perform_normal_io_completion; + task->task_status.open_rej_reason = open_rej_reason; +} + +/** + * isci_request_handle_controller_specific_errors() - This function decodes + * controller-specific I/O completion error conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * + * none. + */ +static void isci_request_handle_controller_specific_errors( + struct isci_remote_device *idev, + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr) +{ + unsigned int cstatus; + + cstatus = request->scu_status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " + "- controller status = 0x%x\n", + __func__, request, cstatus); + + /* Decode the controller-specific errors; most + * important is to recognize those conditions in which + * the target may still have a task outstanding that + * must be aborted. + * + * Note that there are SCU completion codes being + * named in the decode below for which SCIC has already + * done work to handle them in a way other than as + * a controller-specific completion code; these are left + * in the decode below for completeness sake. + */ + switch (cstatus) { + case SCU_TASK_DONE_DMASETUP_DIRERR: + /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ + case SCU_TASK_DONE_XFERCNT_ERR: + /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = + isci_perform_normal_io_completion; + } else { + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAM_STAT_TASK_ABORTED; + + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = + isci_perform_error_io_completion; + } + + break; + + case SCU_TASK_DONE_CRC_ERR: + case SCU_TASK_DONE_NAK_CMD_ERR: + case SCU_TASK_DONE_EXCESS_DATA: + case SCU_TASK_DONE_UNEXP_FIS: + /* Also SCU_TASK_DONE_UNEXP_RESP: */ + case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ + /* These are conditions in which the target + * has completed the task, so that no cleanup + * is necessary. + */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_normal_io_completion; + break; + + + /* Note that the only open reject completion codes seen here will be + * abandon-class codes; all others are automatically retried in the SCU. + */ + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_WRONG_DEST); + break; + + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + + /* Note - the return of AB0 will change when + * libsas implements detection of zone violations. + */ + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB0); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB1); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB2); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB3); + break; + + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_BAD_DEST); + break; + + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_STP_NORES); + break; + + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_EPROTO); + break; + + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_CONN_RATE); + break; + + case SCU_TASK_DONE_LL_R_ERR: + /* Also SCU_TASK_DONE_ACK_NAK_TO: */ + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_LL_SY_TERM: + /* Also SCU_TASK_DONE_NAK_ERR:*/ + case SCU_TASK_DONE_LL_LF_TERM: + /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ + case SCU_TASK_DONE_LL_ABORT_ERR: + case SCU_TASK_DONE_SEQ_INV_TYPE: + /* Also SCU_TASK_DONE_UNEXP_XR: */ + case SCU_TASK_DONE_XR_IU_LEN_ERR: + case SCU_TASK_DONE_INV_FIS_LEN: + /* Also SCU_TASK_DONE_XR_WD_LEN: */ + case SCU_TASK_DONE_SDMA_ERR: + case SCU_TASK_DONE_OFFSET_ERR: + case SCU_TASK_DONE_MAX_PLD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ + case SCU_TASK_DONE_SMP_LL_RX_ERR: + case SCU_TASK_DONE_UNEXP_DATA: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_DONE_TASK_ABORT: + default: + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAM_STAT_TASK_ABORTED; + + if (task->task_proto == SAS_PROTOCOL_SMP) { + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_normal_io_completion; + } else { + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_error_io_completion; + } + break; + } +} + +/** + * isci_task_save_for_upper_layer_completion() - This function saves the + * request for later completion to the upper layer driver. + * @host: This parameter is a pointer to the host on which the the request + * should be queued (either as an error or success). + * @request: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static void isci_task_save_for_upper_layer_completion( + struct isci_host *host, + struct isci_request *request, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + struct sas_task *task = isci_request_access_task(request); + + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { + + case isci_perform_normal_io_completion: + + /* Normal notification (task_done) */ + dev_dbg(&host->pdev->dev, + "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the completed list. */ + list_add(&request->completed_node, + &host->requests_to_complete); + + /* Take the request off the device's pending request list. */ + list_del_init(&request->dev_node); + break; + + case isci_perform_aborted_io_completion: + /* No notification to libsas because this request is + * already in the abort path. + */ + dev_dbg(&host->pdev->dev, + "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + + /* Wake up whatever process was waiting for this + * request to complete. + */ + WARN_ON(request->io_request_completion == NULL); + + if (request->io_request_completion != NULL) { + + /* Signal whoever is waiting that this + * request is complete. + */ + complete(request->io_request_completion); + } + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&host->pdev->dev, + "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the aborted list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + + default: + dev_dbg(&host->pdev->dev, + "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + + /* Add to the error to libsas list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + } +} + +static void isci_request_process_stp_response(struct sas_task *task, + void *response_buffer) +{ + struct dev_to_host_fis *d2h_reg_fis = response_buffer; + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (void *)&ts->buf[0]; + + resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); + memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + ts->buf_valid_size = sizeof(*resp); + + /** + * If the device fault bit is set in the status register, then + * set the sense data and return. + */ + if (d2h_reg_fis->status & ATA_DF) + ts->stat = SAS_PROTO_RESPONSE; + else + ts->stat = SAM_STAT_GOOD; + + ts->resp = SAS_TASK_COMPLETE; +} + +static void isci_request_io_request_complete(struct isci_host *ihost, + struct isci_request *request, + enum sci_io_status completion_status) +{ + struct sas_task *task = isci_request_access_task(request); + struct ssp_response_iu *resp_iu; + void *resp_buf; + unsigned long task_flags; + struct isci_remote_device *idev = isci_lookup_device(task->dev); + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; + enum isci_request_status request_status; + enum isci_completion_selection complete_to_host + = isci_perform_normal_io_completion; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, task = %p,\n" + "task->data_dir = %d completion_status = 0x%x\n", + __func__, + request, + task, + task->data_dir, + completion_status); + + spin_lock(&request->state_lock); + request_status = request->status; + + /* Decode the request status. Note that if the request has been + * aborted by a task management function, we don't care + * what the status is. + */ + switch (request_status) { + + case aborted: + /* "aborted" indicates that the request was aborted by a task + * management function, since once a task management request is + * perfomed by the device, the request only completes because + * of the subsequent driver terminate. + * + * Aborted also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + * + * The target is still there (since the TMF was successful). + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case aborting: + /* aborting means that the task management function tried and + * failed to abort the request. We need to note the request + * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the + * target as down. + * + * Aborting also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + if (!idev) + /* The device has been /is being stopped. Note that + * we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_PHY_DOWN; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case terminating: + + /* This was an terminated request. This happens when + * the I/O is being terminated because of an action on + * the device (reset, tear down, etc.), and the I/O needs + * to be completed up the stack. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was a terminated request. */ + + spin_unlock(&request->state_lock); + break; + + case dead: + /* This was a terminated request that timed-out during the + * termination process. There is no task to complete to + * libsas. + */ + complete_to_host = isci_perform_normal_io_completion; + spin_unlock(&request->state_lock); + break; + + default: + + /* The request is done from an SCU HW perspective. */ + request->status = completed; + + spin_unlock(&request->state_lock); + + /* This is an active request being completed from the core. */ + switch (completion_status) { + + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, + request, + task); + + if (sas_protocol_ata(task->task_proto)) { + resp_buf = &request->stp.rsp; + isci_request_process_stp_response(task, + resp_buf); + } else if (SAS_PROTOCOL_SSP == task->task_proto) { + + /* crack the iu response buffer. */ + resp_iu = &request->ssp.rsp; + isci_request_process_response_iu(task, resp_iu, + &ihost->pdev->dev); + + } else if (SAS_PROTOCOL_SMP == task->task_proto) { + + dev_err(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); + + } else + dev_err(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = task->task_status.resp; + status = task->task_status.stat; + break; + + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: + + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + if (task->task_proto == SAS_PROTOCOL_SMP) { + void *rsp = &request->smp.rsp; + + dev_dbg(&ihost->pdev->dev, + "%s: SMP protocol completion\n", + __func__); + + sg_copy_from_buffer( + &task->smp_task.smp_resp, 1, + rsp, sizeof(struct smp_resp)); + } else if (completion_status + == SCI_IO_SUCCESS_IO_DONE_EARLY) { + + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length = sci_req_tx_bytes(request); + + task->task_status.residual + = task->total_xfer_len - transferred_length; + + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; + + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, + status); + + } else + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_SUCCESS\n", + __func__); + + break; + + case SCI_IO_FAILURE_TERMINATED: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, + request, + task); + + /* The request was terminated explicitly. No handling + * is needed in the SCSI error handler path. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + break; + + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + + isci_request_handle_controller_specific_errors( + idev, request, task, &response, &status, + &complete_to_host); + + break; + + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + complete_to_host = isci_perform_error_io_completion; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + case SCI_FAILURE_RETRY_REQUIRED: + + /* Fail the I/O so it can be retried. */ + response = SAS_TASK_UNDELIVERED; + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + + default: + /* Catch any otherwise unhandled error codes here. */ + dev_dbg(&ihost->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); + + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + if (SAS_PROTOCOL_SMP == task->task_proto) { + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + complete_to_host = isci_perform_normal_io_completion; + } else { + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + complete_to_host = isci_perform_error_io_completion; + } + break; + } + break; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + if (task->data_dir == DMA_NONE) + break; + if (task->num_scatter == 0) + /* 0 indicates a single dma address */ + dma_unmap_single(&ihost->pdev->dev, + request->zero_scatter_daddr, + task->total_xfer_len, task->data_dir); + else /* unmap the sgl dma addresses */ + dma_unmap_sg(&ihost->pdev->dev, task->scatter, + request->num_sg_entries, task->data_dir); + break; + case SAS_PROTOCOL_SMP: { + struct scatterlist *sg = &task->smp_task.smp_req; + struct smp_req *smp_req; + void *kaddr; + + dma_unmap_sg(&ihost->pdev->dev, sg, 1, DMA_TO_DEVICE); + + /* need to swab it back in case the command buffer is re-used */ + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + kunmap_atomic(kaddr, KM_IRQ0); + break; + } + default: + break; + } + + /* Put the completed request on the correct list */ + isci_task_save_for_upper_layer_completion(ihost, request, response, + status, complete_to_host + ); + + /* complete the io request to the core. */ + sci_controller_complete_io(ihost, request->target_device, request); + isci_put_device(idev); + + /* set terminated handle so it cannot be completed or + * terminated again, and to cause any calls into abort + * task to recognize the already completed case. + */ + set_bit(IREQ_TERMINATED, &request->flags); +} + +static void sci_request_started_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct domain_device *dev = ireq->target_device->domain_dev; + struct sas_task *task; + + /* XXX as hch said always creating an internal sas_task for tmf + * requests would simplify the driver + */ + task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL; + + /* all unaccelerated request types (non ssp or ncq) handled with + * substates + */ + if (!task && dev->dev_type == SAS_END_DEV) { + sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP); + } else if (!task && + (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high || + isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) { + sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED); + } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { + sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP); + } else if (task && sas_protocol_ata(task->task_proto) && + !task->ata_task.use_ncq) { + u32 state; + + if (task->data_dir == DMA_NONE) + state = SCI_REQ_STP_NON_DATA_WAIT_H2D; + else if (task->ata_task.dma_xfer) + state = SCI_REQ_STP_UDMA_WAIT_TC_COMP; + else /* PIO */ + state = SCI_REQ_STP_PIO_WAIT_H2D; + + sci_change_state(sm, state); + } +} + +static void sci_request_completed_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct isci_host *ihost = ireq->owning_controller; + + /* Tell the SCI_USER that the IO request is complete */ + if (!test_bit(IREQ_TMF, &ireq->flags)) + isci_request_io_request_complete(ihost, ireq, + ireq->sci_status); + else + isci_task_request_complete(ihost, ireq, ireq->sci_status); +} + +static void sci_request_aborting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + /* Setting the abort bit in the Task Context is required by the silicon. */ + ireq->tc->abort = 1; +} + +static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct scu_task_context *tc = ireq->tc; + struct host_to_dev_fis *h2d_fis; + enum sci_status status; + + /* Clear the SRST bit */ + h2d_fis = &ireq->stp.cmd; + h2d_fis->control = 0; + + /* Clear the TC control bit */ + tc->control_frame = 0; + + status = sci_controller_continue_io(ireq); + WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); +} + +static const struct sci_base_state sci_request_state_table[] = { + [SCI_REQ_INIT] = { }, + [SCI_REQ_CONSTRUCTED] = { }, + [SCI_REQ_STARTED] = { + .enter_state = sci_request_started_state_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_H2D] = { + .enter_state = sci_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { }, + [SCI_REQ_STP_PIO_WAIT_H2D] = { + .enter_state = sci_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCI_REQ_STP_PIO_WAIT_FRAME] = { }, + [SCI_REQ_STP_PIO_DATA_IN] = { }, + [SCI_REQ_STP_PIO_DATA_OUT] = { }, + [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, + [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = { + .enter_state = sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + }, + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = { + .enter_state = sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + }, + [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { }, + [SCI_REQ_TASK_WAIT_TC_COMP] = { }, + [SCI_REQ_TASK_WAIT_TC_RESP] = { }, + [SCI_REQ_SMP_WAIT_RESP] = { }, + [SCI_REQ_SMP_WAIT_TC_COMP] = { }, + [SCI_REQ_COMPLETED] = { + .enter_state = sci_request_completed_state_enter, + }, + [SCI_REQ_ABORTING] = { + .enter_state = sci_request_aborting_state_enter, + }, + [SCI_REQ_FINAL] = { }, +}; + +static void +sci_general_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT); + + ireq->target_device = idev; + ireq->protocol = SCIC_NO_PROTOCOL; + ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + + ireq->sci_status = SCI_SUCCESS; + ireq->scu_status = 0; + ireq->post_context = 0xFFFFFFFF; +} + +static enum sci_status +sci_io_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + + if (dev->dev_type == SAS_END_DEV) + /* pass */; + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); + else if (dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + memset(ireq->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); + + return status; +} + +enum sci_status sci_task_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 io_tag, struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (dev->dev_type == SAS_END_DEV || + dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + set_bit(IREQ_TMF, &ireq->flags); + memset(ireq->tc, 0, sizeof(struct scu_task_context)); + } else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + return status; +} + +static enum sci_status isci_request_ssp_request_construct( + struct isci_request *request) +{ + enum sci_status status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + status = sci_io_request_construct_basic_ssp(request); + return status; +} + +static enum sci_status isci_request_stp_request_construct(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct host_to_dev_fis *fis = &ireq->stp.cmd; + struct ata_queued_cmd *qc = task->uldd_task; + enum sci_status status; + + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: ireq = %p\n", + __func__, + ireq); + + memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); + if (!task->ata_task.device_control_reg_update) + fis->flags |= 0x80; + fis->flags &= 0xF0; + + status = sci_io_request_construct_basic_sata(ireq); + + if (qc && (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ)) { + fis->sector_count = qc->tag << 3; + ireq->tc->type.stp.ncq_tag = qc->tag; + } + + return status; +} + +static enum sci_status +sci_io_request_construct_smp(struct device *dev, + struct isci_request *ireq, + struct sas_task *task) +{ + struct scatterlist *sg = &task->smp_task.smp_req; + struct isci_remote_device *idev; + struct scu_task_context *task_context; + struct isci_port *iport; + struct smp_req *smp_req; + void *kaddr; + u8 req_len; + u32 cmd; + + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. + */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + req_len = smp_req->req_len; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + cmd = *(u32 *) smp_req; + kunmap_atomic(kaddr, KM_IRQ0); + + if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE)) + return SCI_FAILURE; + + ireq->protocol = SCIC_SMP_PROTOCOL; + + /* byte swap the smp request. */ + + task_context = ireq->tc; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* + * Fill in the TC with the its required data + * 00h + */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = req_len; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy(&task_context->type.smp, &cmd, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ + task_context->task_phase = 0; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg)); + task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32)); + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +/* + * isci_smp_request_build() - This function builds the smp request. + * @ireq: This parameter points to the isci_request allocated in the + * request construct function. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_smp_request_build(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct device *dev = &ireq->isci_host->pdev->dev; + enum sci_status status = SCI_FAILURE; + + status = sci_io_request_construct_smp(dev, ireq, task); + if (status != SCI_SUCCESS) + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: failed with status = %d\n", + __func__, + status); + + return status; +} + +/** + * isci_io_request_build() - This function builds the io request object. + * @ihost: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_io_request_build(struct isci_host *ihost, + struct isci_request *request, + struct isci_remote_device *idev) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = 0x%p; request = %p, " + "num_scatter = %d\n", + __func__, + idev, + request, + task->num_scatter); + + /* map the sgl addresses, if present. + * libata does the mapping for sata devices + * before we get the request. + */ + if (task->num_scatter && + !sas_protocol_ata(task->task_proto) && + !(SAS_PROTOCOL_SMP & task->task_proto)) { + + request->num_sg_entries = dma_map_sg( + &ihost->pdev->dev, + task->scatter, + task->num_scatter, + task->data_dir + ); + + if (request->num_sg_entries == 0) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } + + status = sci_io_request_construct(ihost, idev, request); + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request construct\n", + __func__); + return SCI_FAILURE; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: + status = isci_request_ssp_request_construct(request); + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + status = isci_request_stp_request_construct(request); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + return SCI_FAILURE; + } + + return SCI_SUCCESS; +} + +static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 tag) +{ + struct isci_request *ireq; + + ireq = ihost->reqs[ISCI_TAG_TCI(tag)]; + ireq->io_tag = tag; + ireq->io_request_completion = NULL; + ireq->flags = 0; + ireq->num_sg_entries = 0; + INIT_LIST_HEAD(&ireq->completed_node); + INIT_LIST_HEAD(&ireq->dev_node); + isci_request_change_state(ireq, allocated); + + return ireq; +} + +static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost, + struct sas_task *task, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.io_task_ptr = task; + ireq->ttype = io_task; + task->lldd_task = ireq; + + return ireq; +} + +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.tmf_task_ptr = isci_tmf; + ireq->ttype = tmf_task; + + return ireq; +} + +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, u16 tag) +{ + enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + struct isci_request *ireq; + unsigned long flags; + int ret = 0; + + /* do common allocation and init of request object. */ + ireq = isci_io_request_from_tag(ihost, task, tag); + + status = isci_io_request_build(ihost, ireq, idev); + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + return status; + } + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) { + + if (isci_task_is_ncq_recovery(task)) { + + /* The device is in an NCQ recovery state. Issue the + * request on the task side. Note that it will + * complete on the I/O request side because the + * request was built that way (ie. + * ireq->is_task_management_request is false). + */ + status = sci_controller_start_task(ihost, + idev, + ireq); + } else { + status = SCI_FAILURE; + } + } else { + /* send the request, let the core assign the IO TAG. */ + status = sci_controller_start_io(ihost, idev, + ireq); + } + + if (status != SCI_SUCCESS && + status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request start (0x%x)\n", + __func__, status); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + return status; + } + + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + * + * In either case, hold onto the I/O for later. + * + * Update it's status and add it to the list in the + * remote device object. + */ + list_add(&ireq->dev_node, &idev->reqs_in_process); + + if (status == SCI_SUCCESS) { + isci_request_change_state(ireq, started); + } else { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + isci_request_change_state(ireq, completed); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error + * handler thread. + */ + isci_execpath_callback(ihost, task, + sas_task_abort); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + + return ret; +} diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h new file mode 100644 index 000000000000..7a1d5a9778eb --- /dev/null +++ b/drivers/scsi/isci/request.h @@ -0,0 +1,448 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REQUEST_H_ +#define _ISCI_REQUEST_H_ + +#include "isci.h" +#include "host.h" +#include "scu_task_context.h" + +/** + * struct isci_request_status - This enum defines the possible states of an I/O + * request. + * + * + */ +enum isci_request_status { + unallocated = 0x00, + allocated = 0x01, + started = 0x02, + completed = 0x03, + aborting = 0x04, + aborted = 0x05, + terminating = 0x06, + dead = 0x07 +}; + +enum task_type { + io_task = 0, + tmf_task = 1 +}; + +enum sci_request_protocol { + SCIC_NO_PROTOCOL, + SCIC_SMP_PROTOCOL, + SCIC_SSP_PROTOCOL, + SCIC_STP_PROTOCOL +}; /* XXX remove me, use sas_task.{dev|task_proto} instead */; + +/** + * isci_stp_request - extra request infrastructure to handle pio/atapi protocol + * @pio_len - number of bytes requested at PIO setup + * @status - pio setup ending status value to tell us if we need + * to wait for another fis or if the transfer is complete. Upon + * receipt of a d2h fis this will be the status field of that fis. + * @sgl - track pio transfer progress as we iterate through the sgl + * @device_cdb_len - atapi device advertises it's transfer constraints at setup + */ +struct isci_stp_request { + u32 pio_len; + u8 status; + + struct isci_stp_pio_sgl { + int index; + u8 set; + u32 offset; + } sgl; + u32 device_cdb_len; +}; + +struct isci_request { + enum isci_request_status status; + #define IREQ_COMPLETE_IN_TARGET 0 + #define IREQ_TERMINATED 1 + #define IREQ_TMF 2 + #define IREQ_ACTIVE 3 + unsigned long flags; + /* XXX kill ttype and ttype_ptr, allocate full sas_task */ + enum task_type ttype; + union ttype_ptr_union { + struct sas_task *io_task_ptr; /* When ttype==io_task */ + struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ + } ttype_ptr; + struct isci_host *isci_host; + /* For use in the requests_to_{complete|abort} lists: */ + struct list_head completed_node; + /* For use in the reqs_in_process list: */ + struct list_head dev_node; + spinlock_t state_lock; + dma_addr_t request_daddr; + dma_addr_t zero_scatter_daddr; + unsigned int num_sg_entries; + /* Note: "io_request_completion" is completed in two different ways + * depending on whether this is a TMF or regular request. + * - TMF requests are completed in the thread that started them; + * - regular requests are completed in the request completion callback + * function. + * This difference in operation allows the aborter of a TMF request + * to be sure that once the TMF request completes, the I/O that the + * TMF was aborting is guaranteed to have completed. + * + * XXX kill io_request_completion + */ + struct completion *io_request_completion; + struct sci_base_state_machine sm; + struct isci_host *owning_controller; + struct isci_remote_device *target_device; + u16 io_tag; + enum sci_request_protocol protocol; + u32 scu_status; /* hardware result */ + u32 sci_status; /* upper layer disposition */ + u32 post_context; + struct scu_task_context *tc; + /* could be larger with sg chaining */ + #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2) + struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); + /* This field is a pointer to the stored rx frame data. It is used in + * STP internal requests and SMP response frames. If this field is + * non-NULL the saved frame must be released on IO request completion. + */ + u32 saved_rx_frame_index; + + union { + struct { + union { + struct ssp_cmd_iu cmd; + struct ssp_task_iu tmf; + }; + union { + struct ssp_response_iu rsp; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + }; + } ssp; + struct { + struct smp_resp rsp; + } smp; + struct { + struct isci_stp_request req; + struct host_to_dev_fis cmd; + struct dev_to_host_fis rsp; + } stp; + }; +}; + +static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req) +{ + struct isci_request *ireq; + + ireq = container_of(stp_req, typeof(*ireq), stp.req); + return ireq; +} + +/** + * enum sci_base_request_states - This enumeration depicts all the states for + * the common request state machine. + * + * + */ +enum sci_base_request_states { + /* + * Simply the initial state for the base request state machine. + */ + SCI_REQ_INIT, + + /* + * This state indicates that the request has been constructed. + * This state is entered from the INITIAL state. + */ + SCI_REQ_CONSTRUCTED, + + /* + * This state indicates that the request has been started. This state + * is entered from the CONSTRUCTED state. + */ + SCI_REQ_STARTED, + + SCI_REQ_STP_UDMA_WAIT_TC_COMP, + SCI_REQ_STP_UDMA_WAIT_D2H, + + SCI_REQ_STP_NON_DATA_WAIT_H2D, + SCI_REQ_STP_NON_DATA_WAIT_D2H, + + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED, + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG, + SCI_REQ_STP_SOFT_RESET_WAIT_D2H, + + /* + * While in this state the IO request object is waiting for the TC + * completion notification for the H2D Register FIS + */ + SCI_REQ_STP_PIO_WAIT_H2D, + + /* + * While in this state the IO request object is waiting for either a + * PIO Setup FIS or a D2H register FIS. The type of frame received is + * based on the result of the prior frame and line conditions. + */ + SCI_REQ_STP_PIO_WAIT_FRAME, + + /* + * While in this state the IO request object is waiting for a DATA + * frame from the device. + */ + SCI_REQ_STP_PIO_DATA_IN, + + /* + * While in this state the IO request object is waiting to transmit + * the next data frame to the device. + */ + SCI_REQ_STP_PIO_DATA_OUT, + + /* + * The AWAIT_TC_COMPLETION sub-state indicates that the started raw + * task management request is waiting for the transmission of the + * initial frame (i.e. command, task, etc.). + */ + SCI_REQ_TASK_WAIT_TC_COMP, + + /* + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCI_REQ_TASK_WAIT_TC_RESP, + + /* + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCI_REQ_SMP_WAIT_RESP, + + /* + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP + * request is waiting for the transmission of the initial frame + * (i.e. command, task, etc.). + */ + SCI_REQ_SMP_WAIT_TC_COMP, + + /* + * This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered + * from the ABORTING state. + */ + SCI_REQ_COMPLETED, + + /* + * This state indicates that the request is in the process of being + * terminated/aborted. + * This state is entered from the CONSTRUCTED state. + * This state is entered from the STARTED state. + */ + SCI_REQ_ABORTING, + + /* + * Simply the final state for the base request state machine. + */ + SCI_REQ_FINAL, +}; + +enum sci_status sci_request_start(struct isci_request *ireq); +enum sci_status sci_io_request_terminate(struct isci_request *ireq); +enum sci_status +sci_io_request_event_handler(struct isci_request *ireq, + u32 event_code); +enum sci_status +sci_io_request_frame_handler(struct isci_request *ireq, + u32 frame_index); +enum sci_status +sci_task_request_terminate(struct isci_request *ireq); +extern enum sci_status +sci_request_complete(struct isci_request *ireq); +extern enum sci_status +sci_io_request_tc_completion(struct isci_request *ireq, u32 code); + +/* XXX open code in caller */ +static inline dma_addr_t +sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) +{ + + char *requested_addr = (char *)virt_addr; + char *base_addr = (char *)ireq; + + BUG_ON(requested_addr < base_addr); + BUG_ON((requested_addr - base_addr) >= sizeof(*ireq)); + + return ireq->request_daddr + (requested_addr - base_addr); +} + +/** + * isci_request_change_state() - This function sets the status of the request + * object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + */ +static inline enum isci_request_status +isci_request_change_state(struct isci_request *isci_request, + enum isci_request_status status) +{ + enum isci_request_status old_state; + unsigned long flags; + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, state = 0x%x\n", + __func__, + isci_request, + status); + + BUG_ON(isci_request == NULL); + + spin_lock_irqsave(&isci_request->state_lock, flags); + old_state = isci_request->status; + isci_request->status = status; + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + return old_state; +} + +/** + * isci_request_change_started_to_newstate() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + * state previous to any change. + */ +static inline enum isci_request_status +isci_request_change_started_to_newstate(struct isci_request *isci_request, + struct completion *completion_ptr, + enum isci_request_status newstate) +{ + enum isci_request_status old_state; + unsigned long flags; + + spin_lock_irqsave(&isci_request->state_lock, flags); + + old_state = isci_request->status; + + if (old_state == started || old_state == aborting) { + BUG_ON(isci_request->io_request_completion != NULL); + + isci_request->io_request_completion = completion_ptr; + isci_request->status = newstate; + } + + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, old_state = 0x%x\n", + __func__, + isci_request, + old_state); + + return old_state; +} + +/** + * isci_request_change_started_to_aborted() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @completion_ptr: This parameter is saved as the kernel completion structure + * signalled when the old request completes. + * + * state previous to any change. + */ +static inline enum isci_request_status +isci_request_change_started_to_aborted(struct isci_request *isci_request, + struct completion *completion_ptr) +{ + return isci_request_change_started_to_newstate(isci_request, + completion_ptr, + aborted); +} + +#define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr) + +#define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) + +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag); +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, u16 tag); +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +enum sci_status +sci_task_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 io_tag, + struct isci_request *ireq); +enum sci_status +sci_task_request_construct_ssp(struct isci_request *ireq); +enum sci_status +sci_task_request_construct_sata(struct isci_request *ireq); +void sci_smp_request_copy_response(struct isci_request *ireq); + +static inline int isci_task_is_ncq_recovery(struct sas_task *task) +{ + return (sas_protocol_ata(task->task_proto) && + task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && + task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); + +} + +#endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h new file mode 100644 index 000000000000..462b15174d3f --- /dev/null +++ b/drivers/scsi/isci/sas.h @@ -0,0 +1,219 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_SAS_H_ +#define _SCI_SAS_H_ + +#include <linux/kernel.h> + +/* + * SATA FIS Types These constants depict the various SATA FIS types devined in + * the serial ATA specification. + * XXX: This needs to go into <scsi/sas.h> + */ +#define FIS_REGH2D 0x27 +#define FIS_REGD2H 0x34 +#define FIS_SETDEVBITS 0xA1 +#define FIS_DMA_ACTIVATE 0x39 +#define FIS_DMA_SETUP 0x41 +#define FIS_BIST_ACTIVATE 0x58 +#define FIS_PIO_SETUP 0x5F +#define FIS_DATA 0x46 + +/**************************************************************************/ +#define SSP_RESP_IU_MAX_SIZE 280 + +/* + * contents of the SSP COMMAND INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into <scsi/sas.h> + */ +struct ssp_cmd_iu { + u8 LUN[8]; + u8 add_cdb_len:6; + u8 _r_a:2; + u8 _r_b; + u8 en_fburst:1; + u8 task_prio:4; + u8 task_attr:3; + u8 _r_c; + + u8 cdb[16]; +} __packed; + +/* + * contents of the SSP TASK INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into <scsi/sas.h> + */ +struct ssp_task_iu { + u8 LUN[8]; + u8 _r_a; + u8 task_func; + u8 _r_b[4]; + u16 task_tag; + u8 _r_c[12]; +} __packed; + + +/* + * struct smp_req_phy_id - This structure defines the contents of + * an SMP Request that is comprised of the struct smp_request_header and a + * phy identifier. + * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phy_id { + u8 _r_a[4]; /* bytes 4-7 */ + + u8 ign_zone_grp:1; /* byte 8 */ + u8 _r_b:7; + + u8 phy_id; /* byte 9 */ + u8 _r_c; /* byte 10 */ + u8 _r_d; /* byte 11 */ +} __packed; + +/* + * struct smp_req_config_route_info - This structure defines the + * contents of an SMP Configure Route Information request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_conf_rtinfo { + u16 exp_change_cnt; /* bytes 4-5 */ + u8 exp_rt_idx_hi; /* byte 6 */ + u8 exp_rt_idx; /* byte 7 */ + + u8 _r_a; /* byte 8 */ + u8 phy_id; /* byte 9 */ + u16 _r_b; /* bytes 10-11 */ + + u8 _r_c:7; /* byte 12 */ + u8 dis_rt_entry:1; + u8 _r_d[3]; /* bytes 13-15 */ + + u8 rt_sas_addr[8]; /* bytes 16-23 */ + u8 _r_e[16]; /* bytes 24-39 */ +} __packed; + +/* + * struct smp_req_phycntl - This structure defines the contents of an + * SMP Phy Controller request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phycntl { + u16 exp_change_cnt; /* byte 4-5 */ + + u8 _r_a[3]; /* bytes 6-8 */ + + u8 phy_id; /* byte 9 */ + u8 phy_op; /* byte 10 */ + + u8 upd_pathway:1; /* byte 11 */ + u8 _r_b:7; + + u8 _r_c[12]; /* byte 12-23 */ + + u8 att_dev_name[8]; /* byte 24-31 */ + + u8 _r_d:4; /* byte 32 */ + u8 min_linkrate:4; + + u8 _r_e:4; /* byte 33 */ + u8 max_linkrate:4; + + u8 _r_f[2]; /* byte 34-35 */ + + u8 pathway:4; /* byte 36 */ + u8 _r_g:4; + + u8 _r_h[3]; /* bytes 37-39 */ +} __packed; + +/* + * struct smp_req - This structure simply unionizes the existing request + * structures into a common request type. + * + * XXX: This data structure may need to go to scsi/sas.h + */ +struct smp_req { + u8 type; /* byte 0 */ + u8 func; /* byte 1 */ + u8 alloc_resp_len; /* byte 2 */ + u8 req_len; /* byte 3 */ + u8 req_data[0]; +} __packed; + +#define SMP_RESP_HDR_SZ 4 + +/* + * struct sci_sas_address - This structure depicts how a SAS address is + * represented by SCI. + * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas + * + */ +struct sci_sas_address { + u32 high; + u32 low; +}; +#endif diff --git a/drivers/scsi/isci/scu_completion_codes.h b/drivers/scsi/isci/scu_completion_codes.h new file mode 100644 index 000000000000..c8b329c695f9 --- /dev/null +++ b/drivers/scsi/isci/scu_completion_codes.h @@ -0,0 +1,283 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_COMPLETION_CODES_HEADER_ +#define _SCU_COMPLETION_CODES_HEADER_ + +/** + * This file contains the constants and macros for the SCU hardware completion + * codes. + * + * + */ + +#define SCU_COMPLETION_TYPE_SHIFT 28 +#define SCU_COMPLETION_TYPE_MASK 0x70000000 + +/** + * SCU_COMPLETION_TYPE() - + * + * This macro constructs an SCU completion type + */ +#define SCU_COMPLETION_TYPE(type) \ + ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT) + +/** + * SCU_COMPLETION_TYPE() - + * + * These macros contain the SCU completion types SCU_COMPLETION_TYPE + */ +#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0) +#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1) +#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2) +#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3) +#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4) + +/** + * + * + * These constants provide the shift and mask values for the various parts of + * an SCU completion code. + */ +#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000 +#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000 +#define SCU_COMPLETION_TL_STATUS_SHIFT 22 +#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000 +#define SCU_COMPLETION_PEG_MASK 0x00010000 +#define SCU_COMPLETION_PORT_MASK 0x00007000 +#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK +#define SCU_COMPLETION_PE_SHIFT 12 +#define SCU_COMPLETION_INDEX_MASK 0x00000FFF + +/** + * SCU_GET_COMPLETION_TYPE() - + * + * This macro returns the SCU completion type. + */ +#define SCU_GET_COMPLETION_TYPE(completion_code) \ + ((completion_code) & SCU_COMPLETION_TYPE_MASK) + +/** + * SCU_GET_COMPLETION_STATUS() - + * + * This macro returns the SCU completion status. + */ +#define SCU_GET_COMPLETION_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_TL_STATUS() - + * + * This macro returns the transport layer completion status. + */ +#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) + +/** + * SCU_MAKE_COMPLETION_STATUS() - + * + * This macro takes a completion code and performs the shift and mask + * operations to turn it into a completion code that can be compared to a + * SCU_GET_COMPLETION_TL_STATUS. + */ +#define SCU_MAKE_COMPLETION_STATUS(completion_code) \ + ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT) + +/** + * SCU_NORMALIZE_COMPLETION_STATUS() - + * + * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a + * return code. + */ +#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \ + (\ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \ + >> SCU_COMPLETION_TL_STATUS_SHIFT \ + ) + +/** + * SCU_GET_COMPLETION_SDMA_STATUS() - + * + * This macro returns the SDMA completion status. + */ +#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_PEG() - + * + * This macro returns the Protocol Engine Group from the completion code. + */ +#define SCU_GET_COMPLETION_PEG(completion_code) \ + ((completion_code) & SCU_COMPLETION_PEG_MASK) + +/** + * SCU_GET_COMPLETION_PORT() - + * + * This macro reuturns the logical port index from the completion code. + */ +#define SCU_GET_COMPLETION_PORT(completion_code) \ + ((completion_code) & SCU_COMPLETION_PORT_MASK) + +/** + * SCU_GET_PROTOCOL_ENGINE_INDEX() - + * + * This macro returns the PE index from the completion code. + */ +#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \ + (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT) + +/** + * SCU_GET_COMPLETION_INDEX() - + * + * This macro returns the index of the completion which is either a TCi or an + * RNi depending on the completion type. + */ +#define SCU_GET_COMPLETION_INDEX(completion_code) \ + ((completion_code) & SCU_COMPLETION_INDEX_MASK) + +#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000 +#define SCU_UNSOLICITED_FRAME_SHIFT 16 + +/** + * SCU_GET_FRAME_INDEX() - + * + * This macro returns a normalized frame index from an unsolicited frame + * completion. + */ +#define SCU_GET_FRAME_INDEX(completion_code) \ + (\ + ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \ + >> SCU_UNSOLICITED_FRAME_SHIFT \ + ) + +#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000 + +/** + * SCU_GET_FRAME_ERROR() - + * + * This macro returns a zero (0) value if there is no frame error otherwise it + * returns non-zero (!0). + */ +#define SCU_GET_FRAME_ERROR(completion_code) \ + ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK) + +/** + * + * + * These constants represent normalized completion codes which must be shifted + * 18 bits to match it with the hardware completion code. In a 16-bit compiler, + * immediate constants are 16-bit values (the size of an int). If we shift + * those by 18 bits, we completely lose the value. To ensure the value is a + * 32-bit value like we want, each immediate value must be cast to a u32. + */ +#define SCU_TASK_DONE_GOOD ((u32)0x00) +#define SCU_TASK_DONE_CRC_ERR ((u32)0x14) +#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) +#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) +#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) +#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16) +#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) +#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) +#define SCU_TASK_DONE_LL_PERR ((u32)0x18) +#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19) +#define SCU_TASK_DONE_NAK_ERR ((u32)0x19) +#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A) +#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A) +#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B) +#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B) +#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C) +#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C) +#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D) +#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D) +#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E) +#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E) +#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F) +#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20) +#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21) +#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22) +#define SCU_TASK_DONE_LF_ERR ((u32)0x23) +#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24) +#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24) +#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25) +#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26) +#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27) +#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27) +#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29) +#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A) +#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B) +#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C) +#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D) +#define SCU_TASK_DONE_REG_ERR ((u32)0x2E) +#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) +#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) +#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32) +#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33) +#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37) +#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38) +#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39) +#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A) +#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B) +#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C) +#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D) +#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E) +#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F) + +#endif /* _SCU_COMPLETION_CODES_HEADER_ */ diff --git a/drivers/scsi/isci/scu_event_codes.h b/drivers/scsi/isci/scu_event_codes.h new file mode 100644 index 000000000000..36a945ad5722 --- /dev/null +++ b/drivers/scsi/isci/scu_event_codes.h @@ -0,0 +1,336 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_EVENT_CODES_HEADER__ +#define __SCU_EVENT_CODES_HEADER__ + +/** + * This file contains the constants and macros for the SCU event codes. + * + * + */ + +#define SCU_EVENT_TYPE_CODE_SHIFT 24 +#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000 + +#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18 +#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000 + +#define SCU_EVENT_CODE_MASK \ + (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * SCU_EVENT_TYPE() - + * + * This macro constructs an SCU event type from the type value. + */ +#define SCU_EVENT_TYPE(type) \ + ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT) + +/** + * SCU_EVENT_SPECIFIC() - + * + * This macro constructs an SCU event specifier from the code value. + */ +#define SCU_EVENT_SPECIFIC(code) \ + ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT) + +/** + * SCU_EVENT_MESSAGE() - + * + * This macro constructs a combines an SCU event type and SCU event specifier + * from the type and code values. + */ +#define SCU_EVENT_MESSAGE(type, code) \ + ((type) | SCU_EVENT_SPECIFIC(code)) + +/** + * SCU_EVENT_TYPE() - + * + * SCU_EVENT_TYPES + */ +#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08) +#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09) +#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00) +#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01) +#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02) +#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03) +#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05) +#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06) +#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07) +#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A) + +/** + * + * + * SCU_EVENT_SPECIFIERS + */ +#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20 +#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00 + +/** + * + * + * SMU_COMMAND_EVENTS + */ +#define SCU_EVENT_INVALID_CONTEXT_COMMAND \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00) + +/** + * + * + * SMU_PCQ_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00) + +/** + * + * + * SMU_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02) +#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03) +#define SCU_EVENT_PCIE_INTERFACE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04) +#define SCU_EVENT_FUNCTION_LEVEL_RESET \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05) + +/** + * + * + * TRANSPORT_LEVEL_ERRORS + */ +#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00) + +/** + * + * + * BROADCAST_CHANGE_EVENTS + */ +#define SCU_EVENT_BROADCAST_CHANGE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01) +#define SCU_EVENT_BROADCAST_RESERVED0 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02) +#define SCU_EVENT_BROADCAST_RESERVED1 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03) +#define SCU_EVENT_BROADCAST_SES \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04) +#define SCU_EVENT_BROADCAST_EXPANDER \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05) +#define SCU_EVENT_BROADCAST_AEN \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06) +#define SCU_EVENT_BROADCAST_RESERVED3 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07) +#define SCU_EVENT_BROADCAST_RESERVED4 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08) +#define SCU_EVENT_PE_SUSPENDED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09) + +/** + * + * + * OSSP_EVENTS + */ +#define SCU_EVENT_PORT_SELECTOR_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10) +#define SCU_EVENT_SENT_PORT_SELECTION \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11) +#define SCU_EVENT_HARD_RESET_TRANSMITTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12) +#define SCU_EVENT_HARD_RESET_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13) +#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15) +#define SCU_EVENT_LINK_FAILURE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16) +#define SCU_EVENT_SATA_SPINUP_HOLD \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17) +#define SCU_EVENT_SAS_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18) +#define SCU_EVENT_SAS_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19) +#define SCU_EVENT_SAS_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A) +#define SCU_EVENT_SAS_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B) +#define SCU_EVENT_SAS_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C) +#define SCU_EVENT_SAS_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D) +#define SCU_EVENT_SATA_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E) +#define SCU_EVENT_SATA_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F) +#define SCU_EVENT_SATA_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20) +#define SCU_EVENT_SATA_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21) +#define SCU_EVENT_SATA_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22) +#define SCU_EVENT_SATA_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23) +#define SCU_EVENT_SAS_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24) +#define SCU_EVENT_SATA_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25) + +/** + * + * + * FATAL_INTERNAL_MEMORY_ERROR_EVENTS + */ +#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00) +#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01) +#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02) + +/** + * + * + * REMOTE_NODE_SUSPEND_EVENTS + */ +#define SCU_EVENT_TL_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00) +#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20) + +/** + * + * + * REMOTE_NODE_MISC_EVENTS + */ +#define SCU_EVENT_POST_RCN_RELEASE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02) +#define SCU_EVENT_POST_RNC_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03) +#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04) + +/** + * + * + * ERROR_COUNT_EVENT + */ +#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00) +#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01) +#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02) + +/** + * scu_get_event_type() - + * + * This macro returns the SCU event type from the event code. + */ +#define scu_get_event_type(event_code) \ + ((event_code) & SCU_EVENT_TYPE_CODE_MASK) + +/** + * scu_get_event_specifier() - + * + * This macro returns the SCU event specifier from the event code. + */ +#define scu_get_event_specifier(event_code) \ + ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * scu_get_event_code() - + * + * This macro returns the combined SCU event type and SCU event specifier from + * the event code. + */ +#define scu_get_event_code(event_code) \ + ((event_code) & SCU_EVENT_CODE_MASK) + + +/** + * + * + * PTS_SCHEDULE_EVENT + */ +#define SCU_EVENT_SMP_RESPONSE_NO_PE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00) +#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \ + scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE) + +#define SCU_EVENT_TASK_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01) +#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT) + +#define SCU_EVENT_IT_NEXUS_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02) +#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT) + + +#endif /* __SCU_EVENT_CODES_HEADER__ */ diff --git a/drivers/scsi/isci/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h new file mode 100644 index 000000000000..33745adc826b --- /dev/null +++ b/drivers/scsi/isci/scu_remote_node_context.h @@ -0,0 +1,229 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__ +#define __SCU_REMOTE_NODE_CONTEXT_HEADER__ + +/** + * This file contains the structures and constatns used by the SCU hardware to + * describe a remote node context. + * + * + */ + +/** + * struct ssp_remote_node_context - This structure contains the SCU hardware + * definition for an SSP remote node. + * + * + */ +struct ssp_remote_node_context { + /* WORD 0 */ + + /** + * This field is the remote node index assigned for this remote node. All + * remote nodes must have a unique remote node index. The value of the remote + * node index can not exceed the maximum number of remote nodes reported in + * the SCU device context capacity register. + */ + u32 remote_node_index:12; + u32 reserved0_1:4; + + /** + * This field tells the SCU hardware how many simultaneous connections that + * this remote node will support. + */ + u32 remote_node_port_width:4; + + /** + * This field tells the SCU hardware which logical port to associate with this + * remote node. + */ + u32 logical_port_index:3; + u32 reserved0_2:5; + + /** + * This field will enable the I_T nexus loss timer for this remote node. + */ + u32 nexus_loss_timer_enable:1; + + /** + * This field is the for driver debug only and is not used. + */ + u32 check_bit:1; + + /** + * This field must be set to true when the hardware DMAs the remote node + * context to the hardware SRAM. When the remote node is being invalidated + * this field must be set to false. + */ + u32 is_valid:1; + + /** + * This field must be set to true. + */ + u32 is_remote_node_context:1; + + /* WORD 1 - 2 */ + + /** + * This is the low word of the remote device SAS Address + */ + u32 remote_sas_address_lo; + + /** + * This field is the high word of the remote device SAS Address + */ + u32 remote_sas_address_hi; + + /* WORD 3 */ + /** + * This field reprensets the function number assigned to this remote device. + * This value must match the virtual function number that is being used to + * communicate to the device. + */ + u32 function_number:8; + u32 reserved3_1:8; + + /** + * This field provides the driver a way to cheat on the arbitration wait time + * for this remote node. + */ + u32 arbitration_wait_time:16; + + /* WORD 4 */ + /** + * This field tells the SCU hardware how long this device may occupy the + * connection before it must be closed. + */ + u32 connection_occupancy_timeout:16; + + /** + * This field tells the SCU hardware how long to maintain a connection when + * there are no frames being transmitted on the link. + */ + u32 connection_inactivity_timeout:16; + + /* WORD 5 */ + /** + * This field allows the driver to cheat on the arbitration wait time for this + * remote node. + */ + u32 initial_arbitration_wait_time:16; + + /** + * This field is tells the hardware what to program for the connection rate in + * the open address frame. See the SAS spec for valid values. + */ + u32 oaf_connection_rate:4; + + /** + * This field tells the SCU hardware what to program for the features in the + * open address frame. See the SAS spec for valid values. + */ + u32 oaf_features:4; + + /** + * This field tells the SCU hardware what to use for the source zone group in + * the open address frame. See the SAS spec for more details on zoning. + */ + u32 oaf_source_zone_group:8; + + /* WORD 6 */ + /** + * This field tells the SCU hardware what to use as the more capibilities in + * the open address frame. See the SAS Spec for details. + */ + u32 oaf_more_compatibility_features; + + /* WORD 7 */ + u32 reserved7; + +}; + +/** + * struct stp_remote_node_context - This structure contains the SCU hardware + * definition for a STP remote node. + * + * STP Targets are not yet supported so this definition is a placeholder until + * we do support them. + */ +struct stp_remote_node_context { + /** + * Placeholder data for the STP remote node. + */ + u32 data[8]; + +}; + +/** + * This union combines the SAS and SATA remote node definitions. + * + * union scu_remote_node_context + */ +union scu_remote_node_context { + /** + * SSP Remote Node + */ + struct ssp_remote_node_context ssp; + + /** + * STP Remote Node + */ + struct stp_remote_node_context stp; + +}; + +#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */ diff --git a/drivers/scsi/isci/scu_task_context.h b/drivers/scsi/isci/scu_task_context.h new file mode 100644 index 000000000000..7df87d923285 --- /dev/null +++ b/drivers/scsi/isci/scu_task_context.h @@ -0,0 +1,942 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_TASK_CONTEXT_H_ +#define _SCU_TASK_CONTEXT_H_ + +/** + * This file contains the structures and constants for the SCU hardware task + * context. + * + * + */ + + +/** + * enum scu_ssp_task_type - This enumberation defines the various SSP task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */ + SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */ + SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */ + SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ + SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ + SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ +} scu_ssp_task_type; + +/** + * enum scu_sata_task_type - This enumeration defines the various SATA task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_DMA_IN, /* /< Read request */ + SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */ + SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */ + SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */ + RESERVED_4, + RESERVED_5, + RESERVED_6, + RESERVED_7, + SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ + SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ + SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ +} scu_sata_task_type; + + +/** + * + * + * SCU_CONTEXT_TYPE + */ +#define SCU_TASK_CONTEXT_TYPE 0 +#define SCU_RNC_CONTEXT_TYPE 1 + +/** + * + * + * SCU_TASK_CONTEXT_VALIDITY + */ +#define SCU_TASK_CONTEXT_INVALID 0 +#define SCU_TASK_CONTEXT_VALID 1 + +/** + * + * + * SCU_COMMAND_CODE + */ +#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0 +#define SCU_COMMAND_CODE_ACTIVE_TASK 1 +#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2 +#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3 + +/** + * + * + * SCU_TASK_PRIORITY + */ +/** + * + * + * This priority is used when there is no priority request for this request. + */ +#define SCU_TASK_PRIORITY_NORMAL 0 + +/** + * + * + * This priority indicates that the task should be scheduled to the head of the + * queue. The task will NOT be executed if the TX is suspended for the remote + * node. + */ +#define SCU_TASK_PRIORITY_HEAD_OF_Q 1 + +/** + * + * + * This priority indicates that the task will be executed before all + * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task + * WILL be executed if the TX is suspended for the remote node. + */ +#define SCU_TASK_PRIORITY_HIGH 2 + +/** + * + * + * This task priority is reserved and should not be used. + */ +#define SCU_TASK_PRIORITY_RESERVED 3 + +#define SCU_TASK_INITIATOR_MODE 1 +#define SCU_TASK_TARGET_MODE 0 + +#define SCU_TASK_REGULAR 0 +#define SCU_TASK_ABORTED 1 + +/* direction bit defintion */ +/** + * + * + * SATA_DIRECTION + */ +#define SCU_SATA_WRITE_DATA_DIRECTION 0 +#define SCU_SATA_READ_DATA_DIRECTION 1 + +/** + * + * + * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift + * operations to construct the various SCU commands + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21 +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000 +#define scu_get_command_request_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18 +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000 +#define scu_get_command_request_subtype(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \ + (\ + SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \ + | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \ + ) +#define scu_get_command_request_full_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16 +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000 +#define scu_get_command_protocl_engine_group(x) \ + ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK) + +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12 +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000 +#define scu_get_command_reqeust_logical_port(x) \ + ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK) + + +#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \ + ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT) + +/** + * MAKE_SCU_CONTEXT_COMMAND_TYPE() - + * + * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU + * command types. + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6) + +#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \ + ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT)) + +/** + * + * + * SCU_REQUEST_TYPES These constants are the various request types that can be + * posted to the SCU hardware. + */ +#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0)) + +#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1)) + +#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4)) + +/** + * + * + * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to + * program the SCU Task context protocol field in word 0x00. + */ +#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00 +#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01 +#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02 +#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 + +/** + * struct ssp_task_context - This is the SCU hardware definition for an SSP + * request. + * + * + */ +struct ssp_task_context { + /* OFFSET 0x18 */ + u32 reserved00:24; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 reserved01; + + /* OFFSET 0x20 */ + u32 fill_bytes:2; + u32 reserved02:6; + u32 changing_data_pointer:1; + u32 retransmit:1; + u32 retry_data_frame:1; + u32 tlr_control:2; + u32 reserved03:19; + + /* OFFSET 0x24 */ + u32 uiRsvd4; + + /* OFFSET 0x28 */ + u32 target_port_transfer_tag:16; + u32 tag:16; + + /* OFFSET 0x2C */ + u32 data_offset; +}; + +/** + * struct stp_task_context - This is the SCU hardware definition for an STP + * request. + * + * + */ +struct stp_task_context { + /* OFFSET 0x18 */ + u32 fis_type:8; + u32 pm_port:4; + u32 reserved0:3; + u32 control:1; + u32 command:8; + u32 features:8; + + /* OFFSET 0x1C */ + u32 reserved1; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 ncq_tag:5; + u32 reserved4:27; + + /* OFFSET 0x2C */ + u32 data_offset; /* TODO: What is this used for? */ +}; + +/** + * struct smp_task_context - This is the SCU hardware definition for an SMP + * request. + * + * + */ +struct smp_task_context { + /* OFFSET 0x18 */ + u32 response_length:8; + u32 function_result:8; + u32 function:8; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 smp_response_ufi:12; + u32 reserved1:20; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 reserved4; + + /* OFFSET 0x2C */ + u32 reserved5; +}; + +/** + * struct primitive_task_context - This is the SCU hardware definition used + * when the driver wants to send a primitive on the link. + * + * + */ +struct primitive_task_context { + /* OFFSET 0x18 */ + /** + * This field is the control word and it must be 0. + */ + u32 control; /* /< must be set to 0 */ + + /* OFFSET 0x1C */ + /** + * This field specifies the primitive that is to be transmitted. + */ + u32 sequence; + + /* OFFSET 0x20 */ + u32 reserved0; + + /* OFFSET 0x24 */ + u32 reserved1; + + /* OFFSET 0x28 */ + u32 reserved2; + + /* OFFSET 0x2C */ + u32 reserved3; +}; + +/** + * The union of the protocols that can be selected in the SCU task context + * field. + * + * protocol_context + */ +union protocol_context { + struct ssp_task_context ssp; + struct stp_task_context stp; + struct smp_task_context smp; + struct primitive_task_context primitive; + u32 words[6]; +}; + +/** + * struct scu_sgl_element - This structure represents a single SCU defined SGL + * element. SCU SGLs contain a 64 bit address with the maximum data transfer + * being 24 bits in size. The SGL can not cross a 4GB boundary. + * + * struct scu_sgl_element + */ +struct scu_sgl_element { + /** + * This field is the upper 32 bits of the 64 bit physical address. + */ + u32 address_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address. + */ + u32 address_lower; + + /** + * This field is the number of bytes to transfer. + */ + u32 length:24; + + /** + * This field is the address modifier to be used when a virtual function is + * requesting a data transfer. + */ + u32 address_modifier:8; + +}; + +#define SCU_SGL_ELEMENT_PAIR_A 0 +#define SCU_SGL_ELEMENT_PAIR_B 1 + +/** + * struct scu_sgl_element_pair - This structure is the SCU hardware definition + * of a pair of SGL elements. The SCU hardware always works on SGL pairs. + * They are refered to in the DS specification as SGL A and SGL B. Each SGL + * pair is followed by the address of the next pair. + * + * + */ +struct scu_sgl_element_pair { + /* OFFSET 0x60-0x68 */ + /** + * This field is the SGL element A of the SGL pair. + */ + struct scu_sgl_element A; + + /* OFFSET 0x6C-0x74 */ + /** + * This field is the SGL element B of the SGL pair. + */ + struct scu_sgl_element B; + + /* OFFSET 0x78-0x7C */ + /** + * This field is the upper 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_upper; + + /** + * This field is the lower 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_lower; + +}; + +/** + * struct transport_snapshot - This structure is the SCU hardware scratch area + * for the task context. This is set to 0 by the driver but can be read by + * issuing a dump TC request to the SCU. + * + * + */ +struct transport_snapshot { + /* OFFSET 0x48 */ + u32 xfer_rdy_write_data_length; + + /* OFFSET 0x4C */ + u32 data_offset; + + /* OFFSET 0x50 */ + u32 data_transfer_size:24; + u32 reserved_50_0:8; + + /* OFFSET 0x54 */ + u32 next_initiator_write_data_offset; + + /* OFFSET 0x58 */ + u32 next_initiator_write_data_xfer_size:24; + u32 reserved_58_0:8; +}; + +/** + * struct scu_task_context - This structure defines the contents of the SCU + * silicon task context. It lays out all of the fields according to the + * expected order and location for the Storage Controller unit. + * + * + */ +struct scu_task_context { + /* OFFSET 0x00 ------ */ + /** + * This field must be encoded to one of the valid SCU task priority values + * - SCU_TASK_PRIORITY_NORMAL + * - SCU_TASK_PRIORITY_HEAD_OF_Q + * - SCU_TASK_PRIORITY_HIGH + */ + u32 priority:2; + + /** + * This field must be set to true if this is an initiator generated request. + * Until target mode is supported all task requests are initiator requests. + */ + u32 initiator_request:1; + + /** + * This field must be set to one of the valid connection rates valid values + * are 0x8, 0x9, and 0xA. + */ + u32 connection_rate:4; + + /** + * This field muse be programed when generating an SMP response since the SMP + * connection remains open until the SMP response is generated. + */ + u32 protocol_engine_index:3; + + /** + * This field must contain the logical port for the task request. + */ + u32 logical_port_index:3; + + /** + * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values + * - SCU_TASK_CONTEXT_PROTOCOL_SMP + * - SCU_TASK_CONTEXT_PROTOCOL_SSP + * - SCU_TASK_CONTEXT_PROTOCOL_STP + * - SCU_TASK_CONTEXT_PROTOCOL_NONE + */ + u32 protocol_type:3; + + /** + * This filed must be set to the TCi allocated for this task + */ + u32 task_index:12; + + /** + * This field is reserved and must be set to 0x00 + */ + u32 reserved_00_0:1; + + /** + * For a normal task request this must be set to 0. If this is an abort of + * this task request it must be set to 1. + */ + u32 abort:1; + + /** + * This field must be set to true for the SCU hardware to process the task. + */ + u32 valid:1; + + /** + * This field must be set to SCU_TASK_CONTEXT_TYPE + */ + u32 context_type:1; + + /* OFFSET 0x04 */ + /** + * This field contains the RNi that is the target of this request. + */ + u32 remote_node_index:12; + + /** + * This field is programmed if this is a mirrored request, which we are not + * using, in which case it is the RNi for the mirrored target. + */ + u32 mirrored_node_index:12; + + /** + * This field is programmed with the direction of the SATA reqeust + * - SCU_SATA_WRITE_DATA_DIRECTION + * - SCU_SATA_READ_DATA_DIRECTION + */ + u32 sata_direction:1; + + /** + * This field is programmsed with one of the following SCU_COMMAND_CODE + * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK + * - SCU_COMMAND_CODE_ACTIVE_TASK + * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK + * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES + */ + u32 command_code:2; + + /** + * This field is set to true if the remote node should be suspended. + * This bit is only valid for SSP & SMP target devices. + */ + u32 suspend_node:1; + + /** + * This field is programmed with one of the following command type codes + * + * For SAS requests use the scu_ssp_task_type + * - SCU_TASK_TYPE_IOREAD + * - SCU_TASK_TYPE_IOWRITE + * - SCU_TASK_TYPE_SMP_REQUEST + * - SCU_TASK_TYPE_RESPONSE + * - SCU_TASK_TYPE_RAW_FRAME + * - SCU_TASK_TYPE_PRIMITIVE + * + * For SATA requests use the scu_sata_task_type + * - SCU_TASK_TYPE_DMA_IN + * - SCU_TASK_TYPE_FPDMAQ_READ + * - SCU_TASK_TYPE_PACKET_DMA_IN + * - SCU_TASK_TYPE_SATA_RAW_FRAME + * - SCU_TASK_TYPE_DMA_OUT + * - SCU_TASK_TYPE_FPDMAQ_WRITE + * - SCU_TASK_TYPE_PACKET_DMA_OUT + */ + u32 task_type:4; + + /* OFFSET 0x08 */ + /** + * This field is reserved and the must be set to 0x00 + */ + u32 link_layer_control:8; /* presently all reserved */ + + /** + * This field is set to true when TLR is to be enabled + */ + u32 ssp_tlr_enable:1; + + /** + * This is field specifies if the SCU DMAs a response frame to host + * memory for good response frames when operating in target mode. + */ + u32 dma_ssp_target_good_response:1; + + /** + * This field indicates if the SCU should DMA the response frame to + * host memory. + */ + u32 do_not_dma_ssp_good_response:1; + + /** + * This field is set to true when strict ordering is to be enabled + */ + u32 strict_ordering:1; + + /** + * This field indicates the type of endianess to be utilized for the + * frame. command, task, and response frames utilized control_frame + * set to 1. + */ + u32 control_frame:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 tl_control_reserved:3; + + /** + * This field is set to true when the SCU hardware task timeout control is to + * be enabled + */ + u32 timeout_enable:1; + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 pts_control_reserved:7; + + /** + * This field should be set to true when block guard is to be enabled + */ + u32 block_guard_enable:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 sdma_control_reserved:7; + + /* OFFSET 0x0C */ + /** + * This field is the address modifier for this io request it should be + * programmed with the virtual function that is making the request. + */ + u32 address_modifier:16; + + /** + * @todo What we support mirrored SMP response frame? + */ + u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */ + + /** + * If this is a mirrored request the logical port index for the mirrored RNi + * must be programmed. + */ + u32 mirrored_logical_port:4; /* mirrored local port index */ + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_0C_0:8; + + /** + * This field must be set to true if the mirrored request processing is to be + * enabled. + */ + u32 mirror_request_enable:1; /* Mirrored request Enable */ + + /* OFFSET 0x10 */ + /** + * This field is the command iu length in dwords + */ + u32 ssp_command_iu_length:8; + + /** + * This is the target TLR enable bit it must be set to 0 when creatning the + * task context. + */ + u32 xfer_ready_tlr_enable:1; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_10_0:7; + + /** + * This is the maximum burst size that the SCU hardware will send in one + * connection its value is (N x 512) and N must be a multiple of 2. If the + * value is 0x00 then maximum burst size is disabled. + */ + u32 ssp_max_burst_size:16; + + /* OFFSET 0x14 */ + /** + * This filed is set to the number of bytes to be transfered in the request. + */ + u32 transfer_length_bytes:24; /* In terms of bytes */ + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 reserved_14_0:8; + + /* OFFSET 0x18-0x2C */ + /** + * This union provides for the protocol specif part of the SCU Task Context. + */ + union protocol_context type; + + /* OFFSET 0x30-0x34 */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_lower; + + /* OFFSET 0x38-0x3C */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_lower; + + /* OFFSET 0x40 */ + /** + * This field is set to the task phase of the SCU hardware. The driver must + * set this to 0x01 + */ + u32 task_phase:8; + + /** + * This field is set to the transport layer task status. The driver must set + * this to 0x00 + */ + u32 task_status:8; + + /** + * This field is used during initiator write TLR + */ + u32 previous_extended_tag:4; + + /** + * This field is set the maximum number of retries for a STP non-data FIS + */ + u32 stp_retry_count:2; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_1:2; + + /** + * This field is used by the SCU TL to determine when to take a snapshot when + * tranmitting read data frames. + * - 0x00 The entire IO + * - 0x01 32k + * - 0x02 64k + * - 0x04 128k + * - 0x08 256k + */ + u32 ssp_tlr_threshold:4; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_2:4; + + /* OFFSET 0x44 */ + u32 write_data_length; /* read only set to 0 */ + + /* OFFSET 0x48-0x58 */ + struct transport_snapshot snapshot; /* read only set to 0 */ + + /* OFFSET 0x5C */ + u32 block_protection_enable:1; + u32 block_size:2; + u32 block_protection_function:2; + u32 reserved_5C_0:9; + u32 active_sgl_element:2; /* read only set to 0 */ + u32 sgl_exhausted:1; /* read only set to 0 */ + u32 payload_data_transfer_error:4; /* read only set to 0 */ + u32 frame_buffer_offset:11; /* read only set to 0 */ + + /* OFFSET 0x60-0x7C */ + /** + * This field is the first SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_ab; + /* OFFSET 0x80-0x9C */ + /** + * This field is the second SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_cd; + + /* OFFSET 0xA0-BC */ + struct scu_sgl_element_pair sgl_snapshot_ac; + + /* OFFSET 0xC0 */ + u32 active_sgl_element_pair; /* read only set to 0 */ + + /* OFFSET 0xC4-0xCC */ + u32 reserved_C4_CC[3]; + + /* OFFSET 0xD0 */ + u32 intermediate_crc_value:16; + u32 initial_crc_seed:16; + + /* OFFSET 0xD4 */ + u32 application_tag_for_verify:16; + u32 application_tag_for_generate:16; + + /* OFFSET 0xD8 */ + u32 reference_tag_seed_for_verify_function; + + /* OFFSET 0xDC */ + u32 reserved_DC; + + /* OFFSET 0xE0 */ + u32 reserved_E0_0:16; + u32 application_tag_mask_for_generate:16; + + /* OFFSET 0xE4 */ + u32 block_protection_control:16; + u32 application_tag_mask_for_verify:16; + + /* OFFSET 0xE8 */ + u32 block_protection_error:8; + u32 reserved_E8_0:24; + + /* OFFSET 0xEC */ + u32 reference_tag_seed_for_verify; + + /* OFFSET 0xF0 */ + u32 intermediate_crc_valid_snapshot:16; + u32 reserved_F0_0:16; + + /* OFFSET 0xF4 */ + u32 reference_tag_seed_for_verify_function_snapshot; + + /* OFFSET 0xF8 */ + u32 snapshot_of_reserved_dword_DC_of_tc; + + /* OFFSET 0xFC */ + u32 reference_tag_seed_for_generate_function_snapshot; + +}; + +#endif /* _SCU_TASK_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c new file mode 100644 index 000000000000..d6bcdd013dc9 --- /dev/null +++ b/drivers/scsi/isci/task.c @@ -0,0 +1,1676 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/completion.h> +#include <linux/irqflags.h> +#include "sas.h" +#include <scsi/libsas.h> +#include "remote_device.h" +#include "remote_node_context.h" +#include "isci.h" +#include "request.h" +#include "task.h" +#include "host.h" + +/** +* isci_task_refuse() - complete the request to the upper layer driver in +* the case where an I/O needs to be completed back in the submit path. +* @ihost: host on which the the request was queued +* @task: request to complete +* @response: response code for the completed task. +* @status: status code for the completed task. +* +*/ +static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, + enum service_response response, + enum exec_status status) + +{ + enum isci_completion_selection disposition; + + disposition = isci_perform_normal_io_completion; + disposition = isci_task_set_completion_status(task, response, status, + disposition); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (disposition) { + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + task->lldd_task = NULL; + + isci_execpath_callback(ihost, task, task->task_done); + break; + + case isci_perform_aborted_io_completion: + /* + * No notification because this request is already in the + * abort path. + */ + dev_dbg(&ihost->pdev->dev, + "%s: Aborted - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&ihost->pdev->dev, + "%s: Error - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + isci_execpath_callback(ihost, task, sas_task_abort); + break; + + default: + dev_dbg(&ihost->pdev->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; + } +} + +#define for_each_sas_task(num, task) \ + for (; num > 0; num--,\ + task = list_entry(task->list.next, struct sas_task, list)) + + +static inline int isci_device_io_ready(struct isci_remote_device *idev, + struct sas_task *task) +{ + return idev ? test_bit(IDEV_IO_READY, &idev->flags) || + (test_bit(IDEV_IO_NCQERROR, &idev->flags) && + isci_task_is_ncq_recovery(task)) + : 0; +} +/** + * isci_task_execute_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to send a task down to + * hardware. + * @task: This parameter specifies the SAS task to send. + * @num: This parameter specifies the number of tasks to queue. + * @gfp_flags: This parameter specifies the context of this call. + * + * status, zero indicates success. + */ +int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) +{ + struct isci_host *ihost = dev_to_ihost(task->dev); + struct isci_remote_device *idev; + unsigned long flags; + bool io_ready; + u16 tag; + + dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); + + for_each_sas_task(num, task) { + enum sci_status status = SCI_FAILURE; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(task->dev); + io_ready = isci_device_io_ready(idev, task); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n", + task, num, task->dev, idev, idev ? idev->flags : 0, + task->uldd_task); + + if (!idev) { + isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); + } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) { + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } else { + /* There is a device and it's ready for I/O. */ + spin_lock_irqsave(&task->task_state_lock, flags); + + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + /* The I/O was aborted. */ + spin_unlock_irqrestore(&task->task_state_lock, + flags); + + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED); + } else { + task->task_state_flags |= SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* build and send the request. */ + status = isci_request_execute(ihost, idev, task, tag); + + if (status != SCI_SUCCESS) { + + spin_lock_irqsave(&task->task_state_lock, flags); + /* Did not really start this command. */ + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Indicate QUEUE_FULL so that the scsi + * midlayer retries. if the request + * failed for remote device reasons, + * it gets returned as + * SAS_TASK_UNDELIVERED next time + * through. + */ + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } + } + } + if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) { + spin_lock_irqsave(&ihost->scic_lock, flags); + /* command never hit the device, so just free + * the tci and skip the sequence increment + */ + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + isci_put_device(idev); + } + return 0; +} + +static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) +{ + struct isci_tmf *isci_tmf; + enum sci_status status; + + if (tmf_task != ireq->ttype) + return SCI_FAILURE; + + isci_tmf = isci_request_access_tmf(ireq); + + switch (isci_tmf->tmf_code) { + + case isci_tmf_sata_srst_high: + case isci_tmf_sata_srst_low: { + struct host_to_dev_fis *fis = &ireq->stp.cmd; + + memset(fis, 0, sizeof(*fis)); + + fis->fis_type = 0x27; + fis->flags &= ~0x80; + fis->flags &= 0xF0; + if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) + fis->control |= ATA_SRST; + else + fis->control &= ~ATA_SRST; + break; + } + /* other management commnd go here... */ + default: + return SCI_FAILURE; + } + + /* core builds the protocol specific request + * based on the h2d fis. + */ + status = sci_task_request_construct_sata(ireq); + + return status; +} + +static struct isci_request *isci_task_request_build(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 tag, struct isci_tmf *isci_tmf) +{ + enum sci_status status = SCI_FAILURE; + struct isci_request *ireq = NULL; + struct domain_device *dev; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_tmf = %p\n", __func__, isci_tmf); + + dev = idev->domain_dev; + + /* do common allocation and init of request object. */ + ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag); + if (!ireq) + return NULL; + + /* let the core do it's construct. */ + status = sci_task_request_construct(ihost, idev, tag, + ireq); + + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_task_request_construct failed - " + "status = 0x%x\n", + __func__, + status); + return NULL; + } + + /* XXX convert to get this from task->tproto like other drivers */ + if (dev->dev_type == SAS_END_DEV) { + isci_tmf->proto = SAS_PROTOCOL_SSP; + status = sci_task_request_construct_ssp(ireq); + if (status != SCI_SUCCESS) + return NULL; + } + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + isci_tmf->proto = SAS_PROTOCOL_SATA; + status = isci_sata_management_task_request_build(ireq); + + if (status != SCI_SUCCESS) + return NULL; + } + return ireq; +} + +static int isci_task_execute_tmf(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_tmf *tmf, unsigned long timeout_ms) +{ + DECLARE_COMPLETION_ONSTACK(completion); + enum sci_task_status status = SCI_TASK_FAILURE; + struct isci_request *ireq; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + unsigned long timeleft; + u16 tag; + + spin_lock_irqsave(&ihost->scic_lock, flags); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + return ret; + + /* sanity check, return TMF_RESP_FUNC_FAILED + * if the device is not there and ready. + */ + if (!idev || + (!test_bit(IDEV_IO_READY, &idev->flags) && + !test_bit(IDEV_IO_NCQERROR, &idev->flags))) { + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p not ready (%#lx)\n", + __func__, + idev, idev ? idev->flags : 0); + goto err_tci; + } else + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", + __func__, idev); + + /* Assign the pointer to the TMF's completion kernel wait structure. */ + tmf->complete = &completion; + + ireq = isci_task_request_build(ihost, idev, tag, tmf); + if (!ireq) + goto err_tci; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* start the TMF io. */ + status = sci_controller_start_task(ihost, idev, ireq); + + if (status != SCI_TASK_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: start_io failed - status = 0x%x, request = %p\n", + __func__, + status, + ireq); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + goto err_tci; + } + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); + + isci_request_change_state(ireq, started); + + /* add the request to the remote device request list. */ + list_add(&ireq->dev_node, &idev->reqs_in_process); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Wait for the TMF to complete, or a timeout. */ + timeleft = wait_for_completion_timeout(&completion, + msecs_to_jiffies(timeout_ms)); + + if (timeleft == 0) { + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); + + sci_controller_terminate_request(ihost, + idev, + ireq); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + wait_for_completion(tmf->complete); + } + + isci_print_tmf(tmf); + + if (tmf->status == SCI_SUCCESS) + ret = TMF_RESP_FUNC_COMPLETE; + else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) { + dev_dbg(&ihost->pdev->dev, + "%s: tmf.status == " + "SCI_FAILURE_IO_RESPONSE_VALID\n", + __func__); + ret = TMF_RESP_FUNC_COMPLETE; + } + /* Else - leave the default "failed" status alone. */ + + dev_dbg(&ihost->pdev->dev, + "%s: completed request = %p\n", + __func__, + ireq); + + return ret; + + err_tci: + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + return ret; +} + +static void isci_task_build_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data) +{ + memset(tmf, 0, sizeof(*tmf)); + + tmf->tmf_code = code; + tmf->cb_state_func = tmf_sent_cb; + tmf->cb_data = cb_data; +} + +static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + struct isci_request *old_request) +{ + isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request); + tmf->io_tag = old_request->io_tag; +} + +/** + * isci_task_validate_request_to_abort() - This function checks the given I/O + * against the "started" state. If the request is still "started", it's + * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD + * BEFORE CALLING THIS FUNCTION. + * @isci_request: This parameter specifies the request object to control. + * @isci_host: This parameter specifies the ISCI host object + * @isci_device: This is the device to which the request is pending. + * @aborted_io_completion: This is a completion structure that will be added to + * the request in case it is changed to aborting; this completion is + * triggered when the request is fully completed. + * + * Either "started" on successful change of the task status to "aborted", or + * "unallocated" if the task cannot be controlled. + */ +static enum isci_request_status isci_task_validate_request_to_abort( + struct isci_request *isci_request, + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct completion *aborted_io_completion) +{ + enum isci_request_status old_state = unallocated; + + /* Only abort the task if it's in the + * device's request_in_process list + */ + if (isci_request && !list_empty(&isci_request->dev_node)) { + old_state = isci_request_change_started_to_aborted( + isci_request, aborted_io_completion); + + } + + return old_state; +} + +/** +* isci_request_cleanup_completed_loiterer() - This function will take care of +* the final cleanup on any request which has been explicitly terminated. +* @isci_host: This parameter specifies the ISCI host object +* @isci_device: This is the device to which the request is pending. +* @isci_request: This parameter specifies the terminated request object. +* @task: This parameter is the libsas I/O request. +*/ +static void isci_request_cleanup_completed_loiterer( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request, + struct sas_task *task) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device=%p, request=%p, task=%p\n", + __func__, isci_device, isci_request, task); + + if (task != NULL) { + + spin_lock_irqsave(&task->task_state_lock, flags); + task->lldd_task = NULL; + + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + + isci_set_task_doneflags(task); + + /* If this task is not in the abort path, call task_done. */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + spin_unlock_irqrestore(&task->task_state_lock, flags); + task->task_done(task); + } else + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + + if (isci_request != NULL) { + spin_lock_irqsave(&isci_host->scic_lock, flags); + list_del_init(&isci_request->dev_node); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + } +} + +/** + * isci_terminate_request_core() - This function will terminate the given + * request, and wait for it to complete. This function must only be called + * from a thread that can wait. Note that the request is terminated and + * completed (back to the host, if started there). + * @ihost: This SCU. + * @idev: The target. + * @isci_request: The I/O request to be terminated. + * + */ +static void isci_terminate_request_core(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *isci_request) +{ + enum sci_status status = SCI_SUCCESS; + bool was_terminated = false; + bool needs_cleanup_handling = false; + enum isci_request_status request_status; + unsigned long flags; + unsigned long termination_completed = 1; + struct completion *io_request_completion; + struct sas_task *task; + + dev_dbg(&ihost->pdev->dev, + "%s: device = %p; request = %p\n", + __func__, idev, isci_request); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + io_request_completion = isci_request->io_request_completion; + + task = (isci_request->ttype == io_task) + ? isci_request_access_task(isci_request) + : NULL; + + /* Note that we are not going to control + * the target to abort the request. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags); + + /* Make sure the request wasn't just sitting around signalling + * device condition (if the request handle is NULL, then the + * request completed but needed additional handling here). + */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + was_terminated = true; + needs_cleanup_handling = true; + status = sci_controller_terminate_request(ihost, + idev, + isci_request); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* + * The only time the request to terminate will + * fail is when the io request is completed and + * being aborted. + */ + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_controller_terminate_request" + " returned = 0x%x\n", + __func__, status); + + isci_request->io_request_completion = NULL; + + } else { + if (was_terminated) { + dev_dbg(&ihost->pdev->dev, + "%s: before completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + + /* Wait here for the request to complete. */ + #define TERMINATION_TIMEOUT_MSEC 500 + termination_completed + = wait_for_completion_timeout( + io_request_completion, + msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); + + if (!termination_completed) { + + /* The request to terminate has timed out. */ + spin_lock_irqsave(&ihost->scic_lock, + flags); + + /* Check for state changes. */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + + /* The best we can do is to have the + * request die a silent death if it + * ever really completes. + * + * Set the request state to "dead", + * and clear the task pointer so that + * an actual completion event callback + * doesn't do anything. + */ + isci_request->status = dead; + isci_request->io_request_completion + = NULL; + + if (isci_request->ttype == io_task) { + + /* Break links with the + * sas_task. + */ + isci_request->ttype_ptr.io_task_ptr + = NULL; + } + } else + termination_completed = 1; + + spin_unlock_irqrestore(&ihost->scic_lock, + flags); + + if (!termination_completed) { + + dev_dbg(&ihost->pdev->dev, + "%s: *** Timeout waiting for " + "termination(%p/%p)\n", + __func__, io_request_completion, + isci_request); + + /* The request can no longer be referenced + * safely since it may go away if the + * termination every really does complete. + */ + isci_request = NULL; + } + } + if (termination_completed) + dev_dbg(&ihost->pdev->dev, + "%s: after completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + } + + if (termination_completed) { + + isci_request->io_request_completion = NULL; + + /* Peek at the status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request->status; + + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + || (request_status == dead) + ) + ) { + + /* The completion routine won't free a request in + * the aborted/aborting/etc. states, so we do + * it here. + */ + needs_cleanup_handling = true; + } + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + } + if (needs_cleanup_handling) + isci_request_cleanup_completed_loiterer( + ihost, idev, isci_request, task); + } +} + +/** + * isci_terminate_pending_requests() - This function will change the all of the + * requests on the given device's state to "aborting", will terminate the + * requests, and wait for them to complete. This function must only be + * called from a thread that can wait. Note that the requests are all + * terminated and completed (back to the host, if started there). + * @isci_host: This parameter specifies SCU. + * @idev: This parameter specifies the target. + * + */ +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct completion request_completion; + enum isci_request_status old_state; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&ihost->scic_lock, flags); + list_splice_init(&idev->reqs_in_process, &list); + + /* assumes that isci_terminate_request_core deletes from the list */ + while (!list_empty(&list)) { + struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node); + + /* Change state to "terminating" if it is currently + * "started". + */ + old_state = isci_request_change_started_to_newstate(ireq, + &request_completion, + terminating); + switch (old_state) { + case started: + case completed: + case aborting: + break; + default: + /* termination in progress, or otherwise dispositioned. + * We know the request was on 'list' so should be safe + * to move it back to reqs_in_process + */ + list_move(&ireq->dev_node, &idev->reqs_in_process); + ireq = NULL; + break; + } + + if (!ireq) + continue; + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + init_completion(&request_completion); + + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p request=%p; task=%p old_state=%d\n", + __func__, idev, ireq, + ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL, + old_state); + + /* If the old_state is started: + * This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. + */ + isci_terminate_request_core(ihost, idev, ireq); + spin_lock_irqsave(&ihost->scic_lock, flags); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/** + * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain + * Template functions. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +static int isci_task_send_lu_reset_sas( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun) +{ + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, isci_device = %p\n", + __func__, isci_host, isci_device); + /* Send the LUN reset to the target. By the time the call returns, + * the TMF has fully exected in the target (in which case the return + * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or + * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). + */ + isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL); + + #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET passed\n", + __func__, isci_device); + else + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET failed (%x)\n", + __func__, isci_device, ret); + + return ret; +} + +static int isci_task_send_lu_reset_sata(struct isci_host *ihost, + struct isci_remote_device *idev, u8 *lun) +{ + int ret = TMF_RESP_FUNC_FAILED; + struct isci_tmf tmf; + + /* Send the soft reset to the target */ + #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ + isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); + + ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_dbg(&ihost->pdev->dev, + "%s: Assert SRST failed (%p) = %x", + __func__, idev, ret); + + /* Return the failure so that the LUN reset is escalated + * to a target reset. + */ + } + return ret; +} + +/** + * isci_task_lu_reset() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to reset the given lun. Note the assumption that while this call is + * executing, no I/O will be sent by the host to the device. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) +{ + struct isci_host *isci_host = dev_to_ihost(domain_device); + struct isci_remote_device *isci_device; + unsigned long flags; + int ret; + + spin_lock_irqsave(&isci_host->scic_lock, flags); + isci_device = isci_lookup_device(domain_device); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", + __func__, domain_device, isci_host, isci_device); + + if (isci_device) + set_bit(IDEV_EH, &isci_device->flags); + + /* If there is a device reset pending on any request in the + * device's list, fail this LUN reset request in order to + * escalate to the device reset. + */ + if (!isci_device || + isci_device_is_reset_pending(isci_host, isci_device)) { + dev_dbg(&isci_host->pdev->dev, + "%s: No dev (%p), or " + "RESET PENDING: domain_device=%p\n", + __func__, isci_device, domain_device); + ret = TMF_RESP_FUNC_FAILED; + goto out; + } + + /* Send the task management part of the reset. */ + if (sas_protocol_ata(domain_device->tproto)) { + ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun); + } else + ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); + + /* If the LUN reset worked, all the I/O can now be terminated. */ + if (ret == TMF_RESP_FUNC_COMPLETE) + /* Terminate all I/O now. */ + isci_terminate_pending_requests(isci_host, + isci_device); + + out: + isci_put_device(isci_device); + return ret; +} + + +/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */ +int isci_task_clear_nexus_port(struct asd_sas_port *port) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) +{ + return TMF_RESP_FUNC_FAILED; +} + +/* Task Management Functions. Must be called from process context. */ + +/** + * isci_abort_task_process_cb() - This is a helper function for the abort task + * TMF command. It manages the request state with respect to the successful + * transmission / completion of the abort task request. + * @cb_state: This parameter specifies when this function was called - after + * the TMF request has been started and after it has timed-out. + * @tmf: This parameter specifies the TMF in progress. + * + * + */ +static void isci_abort_task_process_cb( + enum isci_tmf_cb_state cb_state, + struct isci_tmf *tmf, + void *cb_data) +{ + struct isci_request *old_request; + + old_request = (struct isci_request *)cb_data; + + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: tmf=%p, old_request=%p\n", + __func__, tmf, old_request); + + switch (cb_state) { + + case isci_tmf_started: + /* The TMF has been started. Nothing to do here, since the + * request state was already set to "aborted" by the abort + * task function. + */ + if ((old_request->status != aborted) + && (old_request->status != completed)) + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad request status (%d): tmf=%p, old_request=%p\n", + __func__, old_request->status, tmf, old_request); + break; + + case isci_tmf_timed_out: + + /* Set the task's state to "aborting", since the abort task + * function thread set it to "aborted" (above) in anticipation + * of the task management request working correctly. Since the + * timeout has now fired, the TMF request failed. We set the + * state such that the request completion will indicate the + * device is no longer present. + */ + isci_request_change_state(old_request, aborting); + break; + + default: + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", + __func__, cb_state, tmf, old_request); + break; + } +} + +/** + * isci_task_abort_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to abort a specified task. + * @task: This parameter specifies the SAS task to abort. + * + * status, zero indicates success. + */ +int isci_task_abort_task(struct sas_task *task) +{ + struct isci_host *isci_host = dev_to_ihost(task->dev); + DECLARE_COMPLETION_ONSTACK(aborted_io_completion); + struct isci_request *old_request = NULL; + enum isci_request_status old_state; + struct isci_remote_device *isci_device = NULL; + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + bool any_dev_reset = false; + + /* Get the isci_request reference from the task. Note that + * this check does not depend on the pending request list + * in the device, because tasks driving resets may land here + * after completion in the core. + */ + spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock(&task->task_state_lock); + + old_request = task->lldd_task; + + /* If task is already done, the request isn't valid */ + if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && + (task->task_state_flags & SAS_TASK_AT_INITIATOR) && + old_request) + isci_device = isci_lookup_device(task->dev); + + spin_unlock(&task->task_state_lock); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: task = %p\n", __func__, task); + + if (!isci_device || !old_request) + goto out; + + set_bit(IDEV_EH, &isci_device->flags); + + /* This version of the driver will fail abort requests for + * SATA/STP. Failing the abort request this way will cause the + * SCSI error handler thread to escalate to LUN reset + */ + if (sas_protocol_ata(task->task_proto)) { + dev_dbg(&isci_host->pdev->dev, + " task %p is for a STP/SATA device;" + " returning TMF_RESP_FUNC_FAILED\n" + " to cause a LUN reset...\n", task); + goto out; + } + + dev_dbg(&isci_host->pdev->dev, + "%s: old_request == %p\n", __func__, old_request); + + any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device); + + spin_lock_irqsave(&task->task_state_lock, flags); + + any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + + /* If the extraction of the request reference from the task + * failed, then the request has been completed (or if there is a + * pending reset then this abort request function must be failed + * in order to escalate to the target reset). + */ + if ((old_request == NULL) || any_dev_reset) { + + /* If the device reset task flag is set, fail the task + * management request. Otherwise, the original request + * has completed. + */ + if (any_dev_reset) { + + /* Turn off the task's DONE to make sure this + * task is escalated to a target reset. + */ + task->task_state_flags &= ~SAS_TASK_STATE_DONE; + + /* Make the reset happen as soon as possible. */ + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Fail the task management request in order to + * escalate to the target reset. + */ + ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: Failing task abort in order to " + "escalate to target reset because\n" + "SAS_TASK_NEED_DEV_RESET is set for " + "task %p on dev %p\n", + __func__, task, isci_device); + + + } else { + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + isci_set_task_doneflags(task); + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); + } + goto out; + } else { + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check the request status and change to "aborted" if currently + * "starting"; if true then set the I/O kernel completion + * struct that will be triggered when the request completes. + */ + old_state = isci_task_validate_request_to_abort( + old_request, isci_host, isci_device, + &aborted_io_completion); + if ((old_state != started) && + (old_state != completed) && + (old_state != aborting)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* The request was already being handled by someone else (because + * they got to set the state away from started). + */ + dev_dbg(&isci_host->pdev->dev, + "%s: device = %p; old_request %p already being aborted\n", + __func__, + isci_device, old_request); + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + if (task->task_proto == SAS_PROTOCOL_SMP || + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: SMP request (%d)" + " or complete_in_target (%d), thus no TMF\n", + __func__, (task->task_proto == SAS_PROTOCOL_SMP), + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); + + /* Set the state on the task. */ + isci_task_all_done(task); + + ret = TMF_RESP_FUNC_COMPLETE; + + /* Stopping and SMP devices are not sent a TMF, and are not + * reset, but the outstanding I/O request is terminated below. + */ + } else { + /* Fill in the tmf stucture */ + isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, + isci_abort_task_process_cb, + old_request); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, + ISCI_ABORT_TASK_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: isci_task_send_tmf failed\n", + __func__); + } + if (ret == TMF_RESP_FUNC_COMPLETE) { + set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); + + /* Clean up the request on our side, and wait for the aborted + * I/O to complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request); + } + + /* Make sure we do not leave a reference to aborted_io_completion */ + old_request->io_request_completion = NULL; + out: + isci_put_device(isci_device); + return ret; +} + +/** + * isci_task_abort_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to abort all task for the given lun. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_clear_aca() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +/** + * isci_task_clear_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_query_task() - This function is implemented to cause libsas to + * correctly escalate the failed abort to a LUN or target reset (this is + * because sas_scsi_find_task libsas function does not correctly interpret + * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is + * returned, libsas turns this into a LUN reset; when FUNC_FAILED is + * returned, libsas will turn this into a target reset + * @task: This parameter specifies the sas task being queried. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_query_task( + struct sas_task *task) +{ + /* See if there is a pending device reset for this device. */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + return TMF_RESP_FUNC_FAILED; + else + return TMF_RESP_FUNC_SUCC; +} + +/* + * isci_task_request_complete() - This function is called by the sci core when + * an task request completes. + * @ihost: This parameter specifies the ISCI host object + * @ireq: This parameter is the completed isci_request object. + * @completion_status: This parameter specifies the completion status from the + * sci core. + * + * none. + */ +void +isci_task_request_complete(struct isci_host *ihost, + struct isci_request *ireq, + enum sci_task_status completion_status) +{ + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + struct completion *tmf_complete; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, status=%d\n", + __func__, ireq, completion_status); + + isci_request_change_state(ireq, completed); + + tmf->status = completion_status; + set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); + + if (tmf->proto == SAS_PROTOCOL_SSP) { + memcpy(&tmf->resp.resp_iu, + &ireq->ssp.rsp, + SSP_RESP_IU_MAX_SIZE); + } else if (tmf->proto == SAS_PROTOCOL_SATA) { + memcpy(&tmf->resp.d2h_fis, + &ireq->stp.rsp, + sizeof(struct dev_to_host_fis)); + } + + /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ + tmf_complete = tmf->complete; + + sci_controller_complete_io(ihost, ireq->target_device, ireq); + /* set the 'terminated' flag handle to make sure it cannot be terminated + * or completed again. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + + isci_request_change_state(ireq, unallocated); + list_del_init(&ireq->dev_node); + + /* The task management part completes last. */ + complete(tmf_complete); +} + +static void isci_smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void isci_smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +static struct sas_task *isci_alloc_task(void) +{ + struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL); + + if (task) { + INIT_LIST_HEAD(&task->list); + spin_lock_init(&task->task_state_lock); + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_timer(&task->timer); + init_completion(&task->completion); + } + + return task; +} + +static void isci_free_task(struct isci_host *ihost, struct sas_task *task) +{ + if (task) { + BUG_ON(!list_empty(&task->list)); + kfree(task); + } +} + +static int isci_smp_execute_task(struct isci_host *ihost, + struct domain_device *dev, void *req, + int req_size, void *resp, int resp_size) +{ + int res, retry; + struct sas_task *task = NULL; + + for (retry = 0; retry < 3; retry++) { + task = isci_alloc_task(); + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = isci_smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = isci_smp_task_timedout; + task->timer.expires = jiffies + 10*HZ; + add_timer(&task->timer); + + res = isci_task_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + dev_dbg(&ihost->pdev->dev, + "%s: executing SMP task failed:%d\n", + __func__, res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ECOMM; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + dev_dbg(&ihost->pdev->dev, + "%s: smp task timed out or aborted\n", + __func__); + isci_task_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + dev_dbg(&ihost->pdev->dev, + "%s: SMP task aborted and not done\n", + __func__); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_STAT_GOOD) { + res = 0; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; + } else { + dev_dbg(&ihost->pdev->dev, + "%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __func__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); + isci_free_task(ihost, task); + task = NULL; + } + } +ex_err: + BUG_ON(retry == 3 && task != NULL); + isci_free_task(ihost, task); + return res; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost, + struct domain_device *dev, + int phy_id, int *adt) +{ + struct smp_resp *disc_resp; + u8 *disc_req; + int res; + + disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL); + if (!disc_resp) + return -ENOMEM; + + disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL); + if (disc_req) { + disc_req[0] = SMP_REQUEST; + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + } else { + kfree(disc_resp); + return -ENOMEM; + } + res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (!res) { + if (disc_resp->result != SMP_RESP_FUNC_ACC) + res = disc_resp->result; + else + *adt = disc_resp->disc.attached_dev_type; + } + kfree(disc_req); + kfree(disc_resp); + + return res; +} + +static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num) +{ + struct domain_device *dev = idev->domain_dev; + struct isci_port *iport = idev->isci_port; + struct isci_host *ihost = iport->isci_host; + int res, iteration = 0, attached_device_type; + #define STP_WAIT_MSECS 25000 + unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS); + unsigned long deadline = jiffies + tmo; + enum { + SMP_PHYWAIT_PHYDOWN, + SMP_PHYWAIT_PHYUP, + SMP_PHYWAIT_DONE + } phy_state = SMP_PHYWAIT_PHYDOWN; + + /* While there is time, wait for the phy to go away and come back */ + while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) { + int event = atomic_read(&iport->event); + + ++iteration; + + tmo = wait_event_timeout(ihost->eventq, + event != atomic_read(&iport->event) || + !test_bit(IPORT_BCN_BLOCKED, &iport->flags), + tmo); + /* link down, stop polling */ + if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags)) + break; + + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags)); + + res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num, + &attached_device_type); + tmo = deadline - jiffies; + + if (res) { + dev_dbg(&ihost->pdev->dev, + "%s: iteration %d, phase %d:" + " SMP error=%d, time_remaining=%lu\n", + __func__, iteration, phy_state, res, tmo); + break; + } + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d, " + "attdevtype = %x\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags), + attached_device_type); + + switch (phy_state) { + case SMP_PHYWAIT_PHYDOWN: + /* Has the device gone away? */ + if (!attached_device_type) + phy_state = SMP_PHYWAIT_PHYUP; + + break; + + case SMP_PHYWAIT_PHYUP: + /* Has the device come back? */ + if (attached_device_type) + phy_state = SMP_PHYWAIT_DONE; + break; + + case SMP_PHYWAIT_DONE: + break; + } + + } + dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); +} + +static int isci_reset_device(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); + struct isci_port *iport = idev->isci_port; + enum sci_status status; + unsigned long flags; + int rc; + + dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); + + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset(idev); + if (status != SCI_SUCCESS) { + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset(%p) returned %d!\n", + __func__, idev, status); + + return TMF_RESP_FUNC_FAILED; + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Make sure all pending requests are able to be fully terminated. */ + isci_device_clear_reset_pending(ihost, idev); + + /* If this is a device on an expander, disable BCN processing. */ + if (!scsi_is_sas_phy_local(phy)) + set_bit(IPORT_BCN_BLOCKED, &iport->flags); + + rc = sas_phy_reset(phy, true); + + /* Terminate in-progress I/O now. */ + isci_remote_device_nuke_requests(ihost, idev); + + /* Since all pending TCs have been cleaned, resume the RNC. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset_complete(idev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* If this is a device on an expander, bring the phy back up. */ + if (!scsi_is_sas_phy_local(phy)) { + /* A phy reset will cause the device to go away then reappear. + * Since libsas will take action on incoming BCNs (eg. remove + * a device going through an SMP phy-control driven reset), + * we need to wait until the phy comes back up before letting + * discovery proceed in libsas. + */ + isci_wait_for_smp_phy_reset(idev, phy->number); + + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_port_bcn_enable(ihost, idev->isci_port); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset_complete(%p) " + "returned %d!\n", __func__, idev, status); + } + + dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); + + return rc; +} + +int isci_task_I_T_nexus_reset(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev || !test_bit(IDEV_EH, &idev->flags)) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} + +int isci_bus_reset_handler(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = sdev_to_domain_dev(cmd->device); + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h new file mode 100644 index 000000000000..4a7fa90287ef --- /dev/null +++ b/drivers/scsi/isci/task.h @@ -0,0 +1,367 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_TASK_H_ +#define _ISCI_TASK_H_ + +#include <scsi/sas_ata.h> +#include "host.h" + +struct isci_request; + +/** + * enum isci_tmf_cb_state - This enum defines the possible states in which the + * TMF callback function is invoked during the TMF execution process. + * + * + */ +enum isci_tmf_cb_state { + + isci_tmf_init_state = 0, + isci_tmf_started, + isci_tmf_timed_out +}; + +/** + * enum isci_tmf_function_codes - This enum defines the possible preparations + * of task management requests. + * + * + */ +enum isci_tmf_function_codes { + + isci_tmf_func_none = 0, + isci_tmf_ssp_task_abort = TMF_ABORT_TASK, + isci_tmf_ssp_lun_reset = TMF_LU_RESET, + isci_tmf_sata_srst_high = TMF_LU_RESET + 0x100, /* Non SCSI */ + isci_tmf_sata_srst_low = TMF_LU_RESET + 0x101 /* Non SCSI */ +}; +/** + * struct isci_tmf - This class represents the task management object which + * acts as an interface to libsas for processing task management requests + * + * + */ +struct isci_tmf { + + struct completion *complete; + enum sas_protocol proto; + union { + struct ssp_response_iu resp_iu; + struct dev_to_host_fis d2h_fis; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + } resp; + unsigned char lun[8]; + u16 io_tag; + struct isci_remote_device *device; + enum isci_tmf_function_codes tmf_code; + int status; + + /* The optional callback function allows the user process to + * track the TMF transmit / timeout conditions. + */ + void (*cb_state_func)( + enum isci_tmf_cb_state, + struct isci_tmf *, void *); + void *cb_data; + +}; + +static inline void isci_print_tmf(struct isci_tmf *tmf) +{ + if (SAS_PROTOCOL_SATA == tmf->proto) + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.d2h_fis.status = %x\n" + "tmf->resp.d2h_fis.error = %x\n", + __func__, + tmf->status, + tmf->resp.d2h_fis.status, + tmf->resp.d2h_fis.error); + else + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.resp_iu.data_present = %x\n" + "tmf->resp.resp_iu.status = %x\n" + "tmf->resp.resp_iu.data_length = %x\n" + "tmf->resp.resp_iu.data[0] = %x\n" + "tmf->resp.resp_iu.data[1] = %x\n" + "tmf->resp.resp_iu.data[2] = %x\n" + "tmf->resp.resp_iu.data[3] = %x\n", + __func__, + tmf->status, + tmf->resp.resp_iu.datapres, + tmf->resp.resp_iu.status, + be32_to_cpu(tmf->resp.resp_iu.response_data_len), + tmf->resp.resp_iu.resp_data[0], + tmf->resp.resp_iu.resp_data[1], + tmf->resp.resp_iu.resp_data[2], + tmf->resp.resp_iu.resp_data[3]); +} + + +int isci_task_execute_task( + struct sas_task *task, + int num, + gfp_t gfp_flags); + +int isci_task_abort_task( + struct sas_task *task); + +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_query_task( + struct sas_task *task); + +int isci_task_lu_reset( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_nexus_port( + struct asd_sas_port *port); + +int isci_task_clear_nexus_ha( + struct sas_ha_struct *ha); + +int isci_task_I_T_nexus_reset( + struct domain_device *d_device); + +void isci_task_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_task_status completion_status); + +u16 isci_task_ssp_request_get_io_tag_to_manage( + struct isci_request *request); + +u8 isci_task_ssp_request_get_function( + struct isci_request *request); + + +void *isci_task_ssp_request_get_response_data_address( + struct isci_request *request); + +u32 isci_task_ssp_request_get_response_data_length( + struct isci_request *request); + +int isci_queuecommand( + struct scsi_cmnd *scsi_cmd, + void (*donefunc)(struct scsi_cmnd *)); + +int isci_bus_reset_handler(struct scsi_cmnd *cmd); + +/** + * enum isci_completion_selection - This enum defines the possible actions to + * take with respect to a given request's notification back to libsas. + * + * + */ +enum isci_completion_selection { + + isci_perform_normal_io_completion, /* Normal notify (task_done) */ + isci_perform_aborted_io_completion, /* No notification. */ + isci_perform_error_io_completion /* Use sas_task_abort */ +}; + +static inline void isci_set_task_doneflags( + struct sas_task *task) +{ + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; +} +/** + * isci_task_all_done() - This function clears the task bits to indicate the + * LLDD is done with the task. + * + * + */ +static inline void isci_task_all_done( + struct sas_task *task) +{ + unsigned long flags; + + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + isci_set_task_doneflags(task); + spin_unlock_irqrestore(&task->task_state_lock, flags); +} + +/** + * isci_task_set_completion_status() - This function sets the completion status + * for the request. + * @task: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * +* @return The new notification mode for the request. +*/ +static inline enum isci_completion_selection +isci_task_set_completion_status( + struct sas_task *task, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + + /* If a device reset is being indicated, make sure the I/O + * is in the error path. + */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { + /* Fail the I/O to make sure it goes into the error path. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + task_notification_selection = isci_perform_error_io_completion; + } + task->task_status.resp = response; + task->task_status.stat = status; + + switch (task_notification_selection) { + + case isci_perform_error_io_completion: + + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* There is no error escalation in the SMP case. + * Convert to a normal completion to avoid the + * timeout in the discovery path and to let the + * next action take place quickly. + */ + task_notification_selection + = isci_perform_normal_io_completion; + + /* Fall through to the normal case... */ + } else { + /* Use sas_task_abort */ + /* Leave SAS_TASK_STATE_DONE clear + * Leave SAS_TASK_AT_INITIATOR set. + */ + break; + } + + case isci_perform_aborted_io_completion: + /* This path can occur with task-managed requests as well as + * requests terminated because of LUN or device resets. + */ + /* Fall through to the normal case... */ + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + isci_set_task_doneflags(task); + break; + default: + WARN_ONCE(1, "unknown task_notification_selection: %d\n", + task_notification_selection); + break; + } + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return task_notification_selection; + +} +/** +* isci_execpath_callback() - This function is called from the task +* execute path when the task needs to callback libsas about the submit-time +* task failure. The callback occurs either through the task's done function +* or through sas_task_abort. In the case of regular non-discovery SATA/STP I/O +* requests, libsas takes the host lock before calling execute task. Therefore +* in this situation the host lock must be managed before calling the func. +* +* @ihost: This parameter is the controller to which the I/O request was sent. +* @task: This parameter is the I/O request. +* @func: This parameter is the function to call in the correct context. +* @status: This parameter is the status code for the completed task. +* +*/ +static inline void isci_execpath_callback(struct isci_host *ihost, + struct sas_task *task, + void (*func)(struct sas_task *)) +{ + struct domain_device *dev = task->dev; + + if (dev_is_sata(dev) && task->uldd_task) { + unsigned long flags; + + /* Since we are still in the submit path, and since + * libsas takes the host lock on behalf of SATA + * devices before I/O starts (in the non-discovery case), + * we need to unlock before we can call the callback function. + */ + raw_local_irq_save(flags); + spin_unlock(dev->sata_dev.ap->lock); + func(task); + spin_lock(dev->sata_dev.ap->lock); + raw_local_irq_restore(flags); + } else + func(task); +} +#endif /* !defined(_SCI_TASK_H_) */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c new file mode 100644 index 000000000000..e9e1e2abacb9 --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -0,0 +1,225 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "unsolicited_frame_control.h" +#include "registers.h" + +int sci_unsolicited_frame_control_construct(struct isci_host *ihost) +{ + struct sci_unsolicited_frame_control *uf_control = &ihost->uf_control; + struct sci_unsolicited_frame *uf; + u32 buf_len, header_len, i; + dma_addr_t dma; + size_t size; + void *virt; + + /* + * Prepare all of the memory sizes for the UF headers, UF address + * table, and UF buffers themselves. + */ + buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); + + /* + * The Unsolicited Frame buffers are set at the start of the UF + * memory descriptor entry. The headers and address table will be + * placed after the buffers. + */ + virt = dmam_alloc_coherent(&ihost->pdev->dev, size, &dma, GFP_KERNEL); + if (!virt) + return -ENOMEM; + + /* + * Program the location of the UF header table into the SCU. + * Notes: + * - The address must align on a 64-byte boundary. Guaranteed to be + * on 64-byte boundary already 1KB boundary for unsolicited frames. + * - Program unused header entries to overlap with the last + * unsolicited frame. The silicon will never DMA to these unused + * headers, since we program the UF address table pointers to + * NULL. + */ + uf_control->headers.physical_address = dma + buf_len; + uf_control->headers.array = virt + buf_len; + + /* + * Program the location of the UF address table into the SCU. + * Notes: + * - The address must align on a 64-bit boundary. Guaranteed to be on 64 + * byte boundary already due to above programming headers being on a + * 64-bit boundary and headers are on a 64-bytes in size. + */ + uf_control->address_table.physical_address = dma + buf_len + header_len; + uf_control->address_table.array = virt + buf_len + header_len; + uf_control->get = 0; + + /* + * UF buffer requirements are: + * - The last entry in the UF queue is not NULL. + * - There is a power of 2 number of entries (NULL or not-NULL) + * programmed into the queue. + * - Aligned on a 1KB boundary. */ + + /* + * Program the actual used UF buffers into the UF address table and + * the controller's array of UFs. + */ + for (i = 0; i < SCU_MAX_UNSOLICITED_FRAMES; i++) { + uf = &uf_control->buffers.array[i]; + + uf_control->address_table.array[i] = dma; + + uf->buffer = virt; + uf->header = &uf_control->headers.array[i]; + uf->state = UNSOLICITED_FRAME_EMPTY; + + /* + * Increment the address of the physical and virtual memory + * pointers. Everything is aligned on 1k boundary with an + * increment of 1k. + */ + virt += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + dma += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + } + + return 0; +} + +enum sci_status sci_unsolicited_frame_control_get_header(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header) +{ + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { + /* Skip the first word in the frame since this is a controll word used + * by the hardware. + */ + *frame_header = &uf_control->buffers.array[frame_index].header->data; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +enum sci_status sci_unsolicited_frame_control_get_buffer(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer) +{ + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { + *frame_buffer = uf_control->buffers.array[frame_index].buffer; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +bool sci_unsolicited_frame_control_release_frame(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index) +{ + u32 frame_get; + u32 frame_cycle; + + frame_get = uf_control->get & (SCU_MAX_UNSOLICITED_FRAMES - 1); + frame_cycle = uf_control->get & SCU_MAX_UNSOLICITED_FRAMES; + + /* + * In the event there are NULL entries in the UF table, we need to + * advance the get pointer in order to find out if this frame should + * be released (i.e. update the get pointer) + */ + while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 && + upper_32_bits(uf_control->address_table.array[frame_get]) == 0 && + frame_get < SCU_MAX_UNSOLICITED_FRAMES) + frame_get++; + + /* + * The table has a NULL entry as it's last element. This is + * illegal. + */ + BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES); + if (frame_index >= SCU_MAX_UNSOLICITED_FRAMES) + return false; + + uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + + if (frame_get != frame_index) { + /* + * Frames remain in use until we advance the get pointer + * so there is nothing we can do here + */ + return false; + } + + /* + * The frame index is equal to the current get pointer so we + * can now free up all of the frame entries that + */ + while (uf_control->buffers.array[frame_get].state == UNSOLICITED_FRAME_RELEASED) { + uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; + + if (frame_get+1 == SCU_MAX_UNSOLICITED_FRAMES-1) { + frame_cycle ^= SCU_MAX_UNSOLICITED_FRAMES; + frame_get = 0; + } else + frame_get++; + } + + uf_control->get = SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get; + + return true; +} diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h new file mode 100644 index 000000000000..31cb9506f52d --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -0,0 +1,278 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ +#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ + +#include "isci.h" + +#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 + +/** + * struct scu_unsolicited_frame_header - + * + * This structure delineates the format of an unsolicited frame header. The + * first DWORD are UF attributes defined by the silicon architecture. The data + * depicts actual header information received on the link. + */ +struct scu_unsolicited_frame_header { + /** + * This field indicates if there is an Initiator Index Table entry with + * which this header is associated. + */ + u32 iit_exists:1; + + /** + * This field simply indicates the protocol type (i.e. SSP, STP, SMP). + */ + u32 protocol_type:3; + + /** + * This field indicates if the frame is an address frame (IAF or OAF) + * or if it is a information unit frame. + */ + u32 is_address_frame:1; + + /** + * This field simply indicates the connection rate at which the frame + * was received. + */ + u32 connection_rate:4; + + u32 reserved:23; + + /** + * This field represents the actual header data received on the link. + */ + u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; + +}; + + + +/** + * enum unsolicited_frame_state - + * + * This enumeration represents the current unsolicited frame state. The + * controller object can not updtate the hardware unsolicited frame put pointer + * unless it has already processed the priror unsolicited frames. + */ +enum unsolicited_frame_state { + /** + * This state is when the frame is empty and not in use. It is + * different from the released state in that the hardware could DMA + * data to this frame buffer. + */ + UNSOLICITED_FRAME_EMPTY, + + /** + * This state is set when the frame buffer is in use by by some + * object in the system. + */ + UNSOLICITED_FRAME_IN_USE, + + /** + * This state is set when the frame is returned to the free pool + * but one or more frames prior to this one are still in use. + * Once all of the frame before this one are freed it will go to + * the empty state. + */ + UNSOLICITED_FRAME_RELEASED, + + UNSOLICITED_FRAME_MAX_STATES +}; + +/** + * struct sci_unsolicited_frame - + * + * This is the unsolicited frame data structure it acts as the container for + * the current frame state, frame header and frame buffer. + */ +struct sci_unsolicited_frame { + /** + * This field contains the current frame state + */ + enum unsolicited_frame_state state; + + /** + * This field points to the frame header data. + */ + struct scu_unsolicited_frame_header *header; + + /** + * This field points to the frame buffer data. + */ + void *buffer; + +}; + +/** + * struct sci_uf_header_array - + * + * This structure contains all of the unsolicited frame header information. + */ +struct sci_uf_header_array { + /** + * This field is represents a virtual pointer to the start + * address of the UF address table. The table contains + * 64-bit pointers as required by the hardware. + */ + struct scu_unsolicited_frame_header *array; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/** + * struct sci_uf_buffer_array - + * + * This structure contains all of the unsolicited frame buffer (actual payload) + * information. + */ +struct sci_uf_buffer_array { + /** + * This field is the unsolicited frame data its used to manage + * the data for the unsolicited frame requests. It also represents + * the virtual address location that corresponds to the + * physical_address field. + */ + struct sci_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES]; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; +}; + +/** + * struct sci_uf_address_table_array - + * + * This object maintains all of the unsolicited frame address table specific + * data. The address table is a collection of 64-bit pointers that point to + * 1KB buffers into which the silicon will DMA unsolicited frames. + */ +struct sci_uf_address_table_array { + /** + * This field represents a virtual pointer that refers to the + * starting address of the UF address table. + * 64-bit pointers are required by the hardware. + */ + dma_addr_t *array; + + /** + * This field specifies the physical address location for the UF + * address table. + */ + dma_addr_t physical_address; + +}; + +/** + * struct sci_unsolicited_frame_control - + * + * This object contains all of the data necessary to handle unsolicited frames. + */ +struct sci_unsolicited_frame_control { + /** + * This field is the software copy of the unsolicited frame queue + * get pointer. The controller object writes this value to the + * hardware to let the hardware put more unsolicited frame entries. + */ + u32 get; + + /** + * This field contains all of the unsolicited frame header + * specific fields. + */ + struct sci_uf_header_array headers; + + /** + * This field contains all of the unsolicited frame buffer + * specific fields. + */ + struct sci_uf_buffer_array buffers; + + /** + * This field contains all of the unsolicited frame address table + * specific fields. + */ + struct sci_uf_address_table_array address_table; + +}; + +struct isci_host; + +int sci_unsolicited_frame_control_construct(struct isci_host *ihost); + +enum sci_status sci_unsolicited_frame_control_get_header( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header); + +enum sci_status sci_unsolicited_frame_control_get_buffer( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer); + +bool sci_unsolicited_frame_control_release_frame( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index); + +#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 58584dc0724a..44e8ca398efa 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, kfree(sdev); goto out; } - + blk_get_queue(sdev->request_queue); sdev->request_queue->queuedata = sdev; scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index e63912510fb9..e0bd3f790fca 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) kfree(evt); } + blk_put_queue(sdev->request_queue); /* NULL queue means the device can't be used */ sdev->request_queue = NULL; diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 4f64183b27fa..7e9c39951ecb 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -635,7 +635,7 @@ static void clks_core_resume(void) struct clk *clkp; list_for_each_entry(clkp, &clock_list, node) { - if (likely(clkp->ops)) { + if (likely(clkp->usecount && clkp->ops)) { unsigned long rate = clkp->rate; if (likely(clkp->ops->set_parent)) diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 6a9e58dd36c7..d18ce9e946d8 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1861,6 +1861,7 @@ static int pl022_setup(struct spi_device *spi) } if ((clk_freq.cpsdvsr < CPSDVR_MIN) || (clk_freq.cpsdvsr > CPSDVR_MAX)) { + status = -EINVAL; dev_err(&spi->dev, "cpsdvsr is configured incorrectly\n"); goto err_config_params; diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 6f86ba0175ac..969cdd2fe124 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -298,7 +298,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) unsigned int count, c; unsigned long base, tx_reg, rx_reg; int word_len, data_type, element_count; - int elements; + int elements = 0; u32 l; u8 * rx; const u8 * tx; diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index f706dba165cf..cc880c95e7de 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -681,13 +681,14 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) { + bits_per_word = transfer->bits_per_word ? : + message->spi->bits_per_word ? : 8; + if (bits_per_word % 16 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = (transfer->len) >> 1; cr_width = BIT_CTL_WORDSIZE; drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; - } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) { + } else if (bits_per_word % 8 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = transfer->len; cr_width = 0; diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 795828b90f45..8945e201e42e 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -116,9 +116,7 @@ (((i)->fifo_lvl_mask + 1))) \ ? 1 : 0) -#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ - (((i)->fifo_lvl_mask + 1) << 1)) \ - ? 1 : 0) +#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0) #define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) #define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 82feb348c8bb..d6620ad309ce 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -516,8 +516,17 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { + ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ ssb_write32(pc->dev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { + ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + /* TODO: Clock Request Update */ + } } void ssb_pcicore_init(struct ssb_pcicore *pc) @@ -529,8 +538,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); - ssb_pcicore_fix_sprom_core_index(pc); - #ifdef CONFIG_SSB_PCICORE_HOSTMODE pc->hostmode = pcicore_is_in_hostmode(pc); if (pc->hostmode) @@ -538,11 +545,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ if (!pc->hostmode) ssb_pcicore_init_clientmode(pc); - - /* Additional always once-executed workarounds */ - ssb_pcicore_serdes_workaround(pc); - /* TODO: ASPM */ - /* TODO: Clock Request Update */ } static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index dfc16f955eb8..196284dc2f36 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -24,23 +24,6 @@ menuconfig STAGING if STAGING -config STAGING_EXCLUDE_BUILD - bool "Exclude Staging drivers from being built" if STAGING - default y - ---help--- - Are you sure you really want to build the staging drivers? - They taint your kernel, don't live up to the normal Linux - kernel quality standards, are a bit crufty around the edges, - and might go off and kick your dog when you aren't paying - attention. - - Say N here to be able to select and build the Staging drivers. - This option is primarily here to prevent them from being built - when selecting 'make allyesconfg' and 'make allmodconfig' so - don't be all that put off, your dog will be just fine. - -if !STAGING_EXCLUDE_BUILD - source "drivers/staging/tty/Kconfig" source "drivers/staging/generic_serial/Kconfig" @@ -177,5 +160,4 @@ source "drivers/staging/mei/Kconfig" source "drivers/staging/nvec/Kconfig" -endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c index 876308858b82..8b1620b1b2d0 100644 --- a/drivers/staging/altera-stapl/altera-jtag.c +++ b/drivers/staging/altera-stapl/altera-jtag.c @@ -26,7 +26,7 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/slab.h> -#include <staging/altera.h> +#include "altera.h" #include "altera-exprt.h" #include "altera-jtag.h" diff --git a/drivers/staging/altera-stapl/altera.c b/drivers/staging/altera-stapl/altera.c index 05aad351b120..9cd5e76880c0 100644 --- a/drivers/staging/altera-stapl/altera.c +++ b/drivers/staging/altera-stapl/altera.c @@ -28,7 +28,7 @@ #include <linux/string.h> #include <linux/firmware.h> #include <linux/slab.h> -#include <staging/altera.h> +#include "altera.h" #include "altera-exprt.h" #include "altera-jtag.h" diff --git a/drivers/staging/altera-stapl/altera.h b/drivers/staging/altera-stapl/altera.h new file mode 100644 index 000000000000..94c0c6181daf --- /dev/null +++ b/drivers/staging/altera-stapl/altera.h @@ -0,0 +1,49 @@ +/* + * altera.h + * + * altera FPGA driver + * + * Copyright (C) Altera Corporation 1998-2001 + * Copyright (C) 2010 NetUP Inc. + * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ALTERA_H_ +#define _ALTERA_H_ + +struct altera_config { + void *dev; + u8 *action; + int (*jtag_io) (void *dev, int tms, int tdi, int tdo); +}; + +#if defined(CONFIG_ALTERA_STAPL) || \ + (defined(CONFIG_ALTERA_STAPL_MODULE) && defined(MODULE)) + +extern int altera_init(struct altera_config *config, const struct firmware *fw); +#else + +static inline int altera_init(struct altera_config *config, + const struct firmware *fw) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +#endif /* CONFIG_ALTERA_STAPL */ + +#endif /* _ALTERA_H_ */ diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig index 1f15e1fb1ab2..afd6cc16a2b8 100644 --- a/drivers/staging/ath6kl/Kconfig +++ b/drivers/staging/ath6kl/Kconfig @@ -1,6 +1,7 @@ config ATH6K_LEGACY tristate "Atheros AR6003 support (non mac80211)" depends on MMC && WLAN + depends on CFG80211 select WIRELESS_EXT select WEXT_PRIV help diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c index 77dfb4070c1d..d3a774dbb7e8 100644 --- a/drivers/staging/ath6kl/os/linux/cfg80211.c +++ b/drivers/staging/ath6kl/os/linux/cfg80211.c @@ -870,7 +870,8 @@ ar6k_cfg80211_scanComplete_event(struct ar6_softc *ar, int status) if(ar->scan_request) { /* Translate data to cfg80211 mgmt format */ - wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy); + if (ar->arWmi) + wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy); cfg80211_scan_done(ar->scan_request, ((status & A_ECANCELED) || (status & A_EBUSY)) ? true : false); diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig index f4cf9b23481e..379cf16e89f7 100644 --- a/drivers/staging/brcm80211/Kconfig +++ b/drivers/staging/brcm80211/Kconfig @@ -7,6 +7,7 @@ config BRCMSMAC default n depends on PCI depends on WLAN && MAC80211 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select CRC_CCITT @@ -20,6 +21,7 @@ config BRCMFMAC default n depends on MMC depends on WLAN && CFG80211 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select WIRELESS_EXT diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.c b/drivers/staging/brcm80211/brcmfmac/wl_iw.c index 929ceaf363be..15e1b05ca92d 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_iw.c +++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.c @@ -64,8 +64,6 @@ wl_iw_extra_params_t g_wl_iw_params; extern bool wl_iw_conn_status_str(u32 event_type, u32 status, u32 reason, char *stringBuf, uint buflen); -uint wl_msg_level = WL_ERROR_VAL; - #define MAX_WLIW_IOCTL_LEN 1024 #ifdef CONFIG_WIRELESS_EXT diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 1502d80f6f78..20008a4376e8 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -2,6 +2,7 @@ config COMEDI tristate "Data acquisition support (comedi)" default N depends on m + depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 ---help--- Enable support a wide range of data acquisition devices for Linux. @@ -160,6 +161,7 @@ config COMEDI_PCL730 config COMEDI_PCL812 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink @@ -171,6 +173,7 @@ config COMEDI_PCL812 config COMEDI_PCL816 tristate "Advantech PCL-814 and PCL-816 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-814 and PCL-816 ISA cards @@ -180,6 +183,7 @@ config COMEDI_PCL816 config COMEDI_PCL818 tristate "Advantech PCL-718 and PCL-818 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-818 ISA cards @@ -269,6 +273,7 @@ config COMEDI_DAS800 config COMEDI_DAS1800 tristate "DAS1800 and compatible ISA card support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -340,6 +345,7 @@ config COMEDI_DT2817 config COMEDI_DT282X tristate "Data Translation DT2821 series and DT-EZ ISA card support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for Data Translation DT2821 series including DT-EZ @@ -419,6 +425,7 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" depends on COMEDI_NI_COMMON + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments AT-A2150 cards @@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI config COMEDI_ADDI_APCI_035 tristate "ADDI-DATA APCI_035 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_035 cards @@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035 config COMEDI_ADDI_APCI_1032 tristate "ADDI-DATA APCI_1032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1032 cards @@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032 config COMEDI_ADDI_APCI_1500 tristate "ADDI-DATA APCI_1500 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1500 cards @@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500 config COMEDI_ADDI_APCI_1516 tristate "ADDI-DATA APCI_1516 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1516 cards @@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1564 cards @@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564 config COMEDI_ADDI_APCI_16XX tristate "ADDI-DATA APCI_16xx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_16xx cards @@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX config COMEDI_ADDI_APCI_2016 tristate "ADDI-DATA APCI_2016 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2016 cards @@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016 config COMEDI_ADDI_APCI_2032 tristate "ADDI-DATA APCI_2032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2032 cards @@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032 config COMEDI_ADDI_APCI_2200 tristate "ADDI-DATA APCI_2200 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2200 cards @@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200 config COMEDI_ADDI_APCI_3001 tristate "ADDI-DATA APCI_3001 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001 config COMEDI_ADDI_APCI_3120 tristate "ADDI-DATA APCI_3520 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120 config COMEDI_ADDI_APCI_3501 tristate "ADDI-DATA APCI_3501 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3501 cards @@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501 config COMEDI_ADDI_APCI_3XXX tristate "ADDI-DATA APCI_3xxx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3xxx cards @@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111 config COMEDI_ADL_PCI9118 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards @@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC depends on COMEDI_MITE select COMEDI_8255 select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments Lab-PC and compatibles diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c index 1c45c11a774e..aa87b1b6a44a 100644 --- a/drivers/staging/gma500/psb_drv.c +++ b/drivers/staging/gma500/psb_drv.c @@ -542,6 +542,8 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset) unsigned long irqflags; int ret = -ENOMEM; uint32_t tt_pages; + struct drm_connector *connector; + struct psb_intel_output *psb_intel_output; dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL); if (dev_priv == NULL) @@ -663,7 +665,18 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset) drm_kms_helper_poll_init(dev); } - ret = psb_backlight_init(dev); + /* Only add backlight support if we have LVDS output */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + psb_intel_output = to_psb_intel_output(connector); + + switch (psb_intel_output->type) { + case INTEL_OUTPUT_LVDS: + ret = psb_backlight_init(dev); + break; + } + } + if (ret) return ret; #if 0 diff --git a/drivers/staging/gma500/psb_fb.c b/drivers/staging/gma500/psb_fb.c index 99c03a2e06bd..084c36bbfe86 100644 --- a/drivers/staging/gma500/psb_fb.c +++ b/drivers/staging/gma500/psb_fb.c @@ -441,6 +441,16 @@ static int psbfb_create(struct psb_fbdev *fbdev, info->screen_size = size; memset(info->screen_base, 0, size); + if (dev_priv->pg->stolen_size) { + info->apertures = alloc_apertures(1); + if (!info->apertures) { + ret = -ENOMEM; + goto out_err0; + } + info->apertures->ranges[0].base = dev->mode_config.fb_base; + info->apertures->ranges[0].size = dev_priv->pg->stolen_size; + } + drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper, sizes->fb_width, sizes->fb_height); diff --git a/drivers/staging/gma500/psb_intel_bios.c b/drivers/staging/gma500/psb_intel_bios.c index 48ac8ba7f40b..417965da5e24 100644 --- a/drivers/staging/gma500/psb_intel_bios.c +++ b/drivers/staging/gma500/psb_intel_bios.c @@ -154,10 +154,15 @@ static void parse_lfp_panel_data(struct drm_psb_private *dev_priv, fill_detail_timing_data(panel_fixed_mode, dvo_timing); - dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; - - DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); - drm_mode_debug_printmodeline(panel_fixed_mode); + if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) { + dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; + DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); + } else { + DRM_DEBUG("Ignoring bogus LVDS VBT mode.\n"); + dev_priv->lvds_vbt = 0; + kfree(panel_fixed_mode); + } return; } diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index f96d5b5d5141..d329635fb5c4 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -4,7 +4,7 @@ menuconfig IIO tristate "Industrial I/O support" - depends on !S390 + depends on GENERIC_HARDIRQS help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h index 0b9b85424dfa..4cc1a5bfab40 100644 --- a/drivers/staging/iio/accel/adis16201.h +++ b/drivers/staging/iio/accel/adis16201.h @@ -81,7 +81,6 @@ struct adis16201_state { int adis16201_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16201_scan { ADIS16201_SCAN_SUPPLY, ADIS16201_SCAN_ACC_X, @@ -92,6 +91,7 @@ enum adis16201_scan { ADIS16201_SCAN_INCLI_Y, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16201_remove_trigger(struct iio_dev *indio_dev); int adis16201_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h index 8bb8ce50c248..175e21bb9b40 100644 --- a/drivers/staging/iio/accel/adis16203.h +++ b/drivers/staging/iio/accel/adis16203.h @@ -76,7 +76,6 @@ struct adis16203_state { int adis16203_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16203_scan { ADIS16203_SCAN_SUPPLY, ADIS16203_SCAN_AUX_ADC, @@ -85,6 +84,7 @@ enum adis16203_scan { ADIS16203_SCAN_INCLI_Y, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16203_remove_trigger(struct iio_dev *indio_dev); int adis16203_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 5310a4297688..1690c0d15690 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -84,7 +84,6 @@ struct adis16204_state { int adis16204_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16204_scan { ADIS16204_SCAN_SUPPLY, ADIS16204_SCAN_ACC_X, @@ -93,6 +92,7 @@ enum adis16204_scan { ADIS16204_SCAN_TEMP, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16204_remove_trigger(struct iio_dev *indio_dev); int adis16204_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h index 58d08db6f9b5..3153cbee0957 100644 --- a/drivers/staging/iio/accel/adis16209.h +++ b/drivers/staging/iio/accel/adis16209.h @@ -121,8 +121,6 @@ struct adis16209_state { int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER - #define ADIS16209_SCAN_SUPPLY 0 #define ADIS16209_SCAN_ACC_X 1 #define ADIS16209_SCAN_ACC_Y 2 @@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16209_SCAN_INCLI_Y 6 #define ADIS16209_SCAN_ROT 7 +#ifdef CONFIG_IIO_RING_BUFFER + void adis16209_remove_trigger(struct iio_dev *indio_dev); int adis16209_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/dac/max517.c b/drivers/staging/iio/dac/max517.c index 881768df47a6..2fe34d21b6aa 100644 --- a/drivers/staging/iio/dac/max517.c +++ b/drivers/staging/iio/dac/max517.c @@ -195,7 +195,7 @@ static const struct iio_info max517_info = { }; static const struct iio_info max518_info = { - .attrs = &max517_attribute_group, + .attrs = &max518_attribute_group, .driver_module = THIS_MODULE, }; diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h index 702dc982f62f..24bf70e4b29b 100644 --- a/drivers/staging/iio/gyro/adis16260.h +++ b/drivers/staging/iio/gyro/adis16260.h @@ -104,7 +104,6 @@ struct adis16260_state { int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16260_SCAN_TEMP 3 #define ADIS16260_SCAN_ANGL 4 +#ifdef CONFIG_IIO_RING_BUFFER void adis16260_remove_trigger(struct iio_dev *indio_dev); int adis16260_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h index db184d11dfc0..e87715b9acc6 100644 --- a/drivers/staging/iio/imu/adis16400.h +++ b/drivers/staging/iio/imu/adis16400.h @@ -158,7 +158,6 @@ struct adis16400_state { int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16300_SCAN_INCLI_X 12 #define ADIS16300_SCAN_INCLI_Y 13 +#ifdef CONFIG_IIO_RING_BUFFER void adis16400_remove_trigger(struct iio_dev *indio_dev); int adis16400_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c index 2589a7e167e4..3612373ddede 100644 --- a/drivers/staging/iio/imu/adis16400_ring.c +++ b/drivers/staging/iio/imu/adis16400_ring.c @@ -137,13 +137,13 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p) if (st->variant->flags & ADIS16400_NO_BURST) { ret = adis16350_spi_read_all(&indio_dev->dev, st->rx); if (ret < 0) - return ret; + goto err; for (; i < ring->scan_count; i++) data[i] = *(s16 *)(st->rx + i*2); } else { ret = adis16400_spi_read_burst(&indio_dev->dev, st->rx); if (ret < 0) - return ret; + goto err; for (; i < indio_dev->ring->scan_count; i++) { j = __ffs(mask); mask &= ~(1 << j); @@ -158,9 +158,13 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p) ring->access->store_to(indio_dev->ring, (u8 *) data, pf->timestamp); iio_trigger_notify_done(indio_dev->trig); - kfree(data); + kfree(data); return IRQ_HANDLED; + +err: + kfree(data); + return ret; } void adis16400_unconfigure_ring(struct iio_dev *indio_dev) diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c index 615902333fb0..d504aa251ced 100644 --- a/drivers/staging/iio/industrialio-trigger.c +++ b/drivers/staging/iio/industrialio-trigger.c @@ -294,6 +294,7 @@ struct iio_poll_func pf->h = h; pf->thread = thread; pf->type = type; + pf->private_data = private; return pf; } diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c index 2818851c0761..685fcf639644 100644 --- a/drivers/staging/mei/init.c +++ b/drivers/staging/mei/init.c @@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev) mutex_lock(&dev->device_lock); } - if (!err && !dev->recvd_msg) { + if (err <= 0 && !dev->recvd_msg) { dev->mei_state = MEI_DISABLED; dev_dbg(&dev->pdev->dev, "wait_event_interruptible_timeout failed" @@ -205,10 +205,10 @@ int mei_hw_init(struct mei_device *dev) "host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n", dev->host_hw_state, dev->me_hw_state); - if (!(dev->host_hw_state & H_RDY) != H_RDY) + if (!(dev->host_hw_state & H_RDY)) dev_dbg(&dev->pdev->dev, "host turn off H_RDY.\n"); - if (!(dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA) + if (!(dev->me_hw_state & ME_RDY_HRA)) dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n"); printk(KERN_ERR "mei: link layer initialization failed.\n"); diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c index 2564b038636a..fff53d0b5c6e 100644 --- a/drivers/staging/mei/wd.c +++ b/drivers/staging/mei/wd.c @@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve) ret = wait_event_interruptible_timeout(dev->wait_stop_wd, dev->wd_stopped, 10 * HZ); mutex_lock(&dev->device_lock); - if (!dev->wd_stopped) - dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n"); - else - dev_dbg(&dev->pdev->dev, "stop wd complete.\n"); + if (dev->wd_stopped) { + dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret); + ret = 0; + } else { + if (!ret) + ret = -ETIMEDOUT; + dev_warn(&dev->pdev->dev, + "stop wd failed to complete ret=%d.\n", ret); + } if (preserve) dev->wd_timeout = wd_timeout; diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig index b05306766870..fe40e0b6f675 100644 --- a/drivers/staging/olpc_dcon/Kconfig +++ b/drivers/staging/olpc_dcon/Kconfig @@ -2,6 +2,7 @@ config FB_OLPC_DCON tristate "One Laptop Per Child Display CONtroller support" depends on OLPC && FB select I2C + select BACKLIGHT_CLASS_DEVICE ---help--- Add support for the OLPC XO DCON controller. This controller is only available on OLPC platforms. Unless you have one of these diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c index bddb0312b31e..cdae497d5467 100644 --- a/drivers/staging/rts_pstor/sd.c +++ b/drivers/staging/rts_pstor/sd.c @@ -2328,7 +2328,7 @@ Switch_Fail: retval = sd_send_cmd_get_rsp(chip, IO_SEND_OP_COND, 0, SD_RSP_TYPE_R4, rsp, 5); if (retval == STATUS_SUCCESS) { - int func_num = (rsp[1] >> 4) && 0x07; + int func_num = (rsp[1] >> 4) & 0x07; if (func_num) { RTSX_DEBUGP("SD_IO card (Function number: %d)!\n", func_num); chip->sd_io = 1; diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c index 6e99ec87fee0..8cbea42b69bc 100644 --- a/drivers/staging/usbip/stub_dev.c +++ b/drivers/staging/usbip/stub_dev.c @@ -26,6 +26,8 @@ static int stub_probe(struct usb_interface *interface, const struct usb_device_id *id); static void stub_disconnect(struct usb_interface *interface); +static int stub_pre_reset(struct usb_interface *interface); +static int stub_post_reset(struct usb_interface *interface); /* * Define device IDs here if you want to explicitly limit exportable devices. @@ -59,6 +61,8 @@ struct usb_driver stub_driver = { .probe = stub_probe, .disconnect = stub_disconnect, .id_table = stub_table, + .pre_reset = stub_pre_reset, + .post_reset = stub_post_reset, }; /* @@ -541,3 +545,20 @@ static void stub_disconnect(struct usb_interface *interface) del_match_busid((char *)udev_busid); } } + +/* + * Presence of pre_reset and post_reset prevents the driver from being unbound + * when the device is being reset + */ + +int stub_pre_reset(struct usb_interface *interface) +{ + dev_dbg(&interface->dev, "pre_reset\n"); + return 0; +} + +int stub_post_reset(struct usb_interface *interface) +{ + dev_dbg(&interface->dev, "post_reset\n"); + return 0; +} diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c index a5c1fa1f0430..bc57844600b9 100644 --- a/drivers/staging/usbip/stub_rx.c +++ b/drivers/staging/usbip/stub_rx.c @@ -175,16 +175,18 @@ static int tweak_reset_device_cmd(struct urb *urb) dev_info(&urb->dev->dev, "usb_queue_reset_device\n"); /* - * usb_lock_device_for_reset caused a deadlock: it causes the driver - * to unbind. In the shutdown the rx thread is signalled to shut down - * but this thread is pending in the usb_lock_device_for_reset. - * - * Instead queue the reset. - * - * Unfortunatly an existing usbip connection will be dropped due to - * driver unbinding. + * With the implementation of pre_reset and post_reset the driver no + * longer unbinds. This allows the use of synchronous reset. */ - usb_queue_reset_device(sdev->interface); + + if (usb_lock_device_for_reset(sdev->udev, sdev->interface)<0) + { + dev_err(&urb->dev->dev, "could not obtain lock to reset device\n"); + return 0; + } + usb_reset_device(sdev->udev); + usb_unlock_device(sdev->udev); + return 0; } diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index dee2a2c909f5..70c2e7fa6664 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -386,7 +386,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) */ se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr, TMR_LUN_RESET); - if (!se_cmd->se_tmr_req) + if (IS_ERR(se_cmd->se_tmr_req)) goto release; /* * Locate the underlying TCM struct se_lun from sc->device->lun @@ -1017,6 +1017,7 @@ static int tcm_loop_make_nexus( struct se_portal_group *se_tpg; struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba; struct tcm_loop_nexus *tl_nexus; + int ret = -ENOMEM; if (tl_tpg->tl_hba->tl_nexus) { printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n"); @@ -1033,8 +1034,10 @@ static int tcm_loop_make_nexus( * Initialize the struct se_session pointer */ tl_nexus->se_sess = transport_init_session(); - if (!tl_nexus->se_sess) + if (IS_ERR(tl_nexus->se_sess)) { + ret = PTR_ERR(tl_nexus->se_sess); goto out; + } /* * Since we are running in 'demo mode' this call with generate a * struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI @@ -1060,7 +1063,7 @@ static int tcm_loop_make_nexus( out: kfree(tl_nexus); - return -ENOMEM; + return ret; } static int tcm_loop_drop_nexus( @@ -1140,7 +1143,7 @@ static ssize_t tcm_loop_tpg_store_nexus( * the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call * tcm_loop_make_nexus() */ - if (strlen(page) > TL_WWN_ADDR_LEN) { + if (strlen(page) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds" " max: %d\n", page, TL_WWN_ADDR_LEN); return -EINVAL; @@ -1321,7 +1324,7 @@ struct se_wwn *tcm_loop_make_scsi_hba( return ERR_PTR(-EINVAL); check_len: - if (strlen(name) > TL_WWN_ADDR_LEN) { + if (strlen(name) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds" " max: %d\n", name, tcm_loop_dump_proto_id(tl_hba), TL_WWN_ADDR_LEN); diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index ee6fad979b50..25c1f49a7d8b 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -304,7 +304,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( printk(KERN_ERR "Unable to locate passed fabric name\n"); return NULL; } - if (strlen(name) > TARGET_FABRIC_NAME_SIZE) { + if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) { printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC" "_NAME_SIZE\n", name); return NULL; @@ -312,7 +312,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL); if (!(tf)) - return ERR_PTR(-ENOMEM); + return NULL; INIT_LIST_HEAD(&tf->tf_list); atomic_set(&tf->tf_access_cnt, 0); @@ -851,7 +851,7 @@ static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial( return -EOPNOTSUPP; } - if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) { + if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) { printk(KERN_ERR "Emulated VPD Unit Serial exceeds" " INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN); return -EOVERFLOW; @@ -917,7 +917,7 @@ static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier( transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -962,19 +962,19 @@ static ssize_t target_core_dev_wwn_show_attr_##_name( \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ } \ @@ -1299,7 +1299,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts( &i_buf[0] : "", pr_reg->pr_res_key, pr_reg->pr_res_generation); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -1496,7 +1496,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) { + if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) { printk(KERN_ERR "APTPL metadata initiator_node=" " exceeds PR_APTPL_MAX_IPORT_LEN: %d\n", PR_APTPL_MAX_IPORT_LEN); @@ -1510,7 +1510,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(isid) > PR_REG_ISID_LEN) { + if (strlen(isid) >= PR_REG_ISID_LEN) { printk(KERN_ERR "APTPL metadata initiator_isid" "= exceeds PR_REG_ISID_LEN: %d\n", PR_REG_ISID_LEN); @@ -1571,7 +1571,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) { + if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) { printk(KERN_ERR "APTPL metadata target_node=" " exceeds PR_APTPL_MAX_TPORT_LEN: %d\n", PR_APTPL_MAX_TPORT_LEN); @@ -3052,7 +3052,7 @@ static struct config_group *target_core_call_addhbatotarget( int ret; memset(buf, 0, TARGET_CORE_NAME_MAX_LEN); - if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) { + if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) { printk(KERN_ERR "Passed *name strlen(): %d exceeds" " TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name), TARGET_CORE_NAME_MAX_LEN); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8407f9ca2b31..ba698ea62bb2 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -192,7 +192,7 @@ int transport_get_lun_for_tmr( &SE_NODE_ACL(se_sess)->device_list[unpacked_lun]; if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun; - dev = se_tmr->tmr_dev = se_lun->lun_se_dev; + dev = se_lun->lun_se_dev; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; @@ -216,6 +216,7 @@ int transport_get_lun_for_tmr( se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; return -1; } + se_tmr->tmr_dev = dev; spin_lock(&dev->se_tmr_lock); list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list); @@ -1430,7 +1431,7 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl( struct se_lun_acl *lacl; struct se_node_acl *nacl; - if (strlen(initiatorname) > TRANSPORT_IQN_LEN) { + if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) { printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n", TPG_TFO(tpg)->get_fabric_name()); *ret = -EOVERFLOW; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index a79f518ca6e2..b662db3a320b 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1916,7 +1916,7 @@ static int __core_scsi3_update_aptpl_buf( pr_reg->pr_res_mapped_lun); } - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1934,7 +1934,7 @@ static int __core_scsi3_update_aptpl_buf( TPG_TFO(tpg)->tpg_get_tag(tpg), lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1986,7 +1986,7 @@ static int __core_scsi3_write_aptpl_to_file( memset(iov, 0, sizeof(struct iovec)); memset(path, 0, 512); - if (strlen(&wwn->unit_serial[0]) > 512) { + if (strlen(&wwn->unit_serial[0]) >= 512) { printk(KERN_ERR "WWN value for struct se_device does not fit" " into path buffer\n"); return -1; diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 59b8b9c5ad72..179063d81cdd 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -75,10 +75,16 @@ void core_tmr_release_req( { struct se_device *dev = tmr->tmr_dev; + if (!dev) { + kmem_cache_free(se_tmr_req_cache, tmr); + return; + } + spin_lock(&dev->se_tmr_lock); list_del(&tmr->tmr_list); - kmem_cache_free(se_tmr_req_cache, tmr); spin_unlock(&dev->se_tmr_lock); + + kmem_cache_free(se_tmr_req_cache, tmr); } static void core_tmr_handle_tas_abort( diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4dafeb8b5638..4b9b7169bdd9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -536,13 +536,13 @@ EXPORT_SYMBOL(transport_register_session); void transport_deregister_session_configfs(struct se_session *se_sess) { struct se_node_acl *se_nacl; - + unsigned long flags; /* * Used by struct se_node_acl's under ConfigFS to locate active struct se_session */ se_nacl = se_sess->se_node_acl; if ((se_nacl)) { - spin_lock_irq(&se_nacl->nacl_sess_lock); + spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags); list_del(&se_sess->sess_acl_list); /* * If the session list is empty, then clear the pointer. @@ -556,7 +556,7 @@ void transport_deregister_session_configfs(struct se_session *se_sess) se_nacl->acl_sess_list.prev, struct se_session, sess_acl_list); } - spin_unlock_irq(&se_nacl->nacl_sess_lock); + spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags); } } EXPORT_SYMBOL(transport_deregister_session_configfs); diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index defff32b7880..7b82f1b7fef8 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -144,7 +144,7 @@ enum ft_cmd_state { */ struct ft_cmd { enum ft_cmd_state state; - u16 lun; /* LUN from request */ + u32 lun; /* LUN from request */ struct ft_sess *sess; /* session held for cmd */ struct fc_seq *seq; /* sequence in exchange mgr */ struct se_cmd se_cmd; /* Local TCM I/O descriptor */ diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index c056a1132ae1..b2a106729d49 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -94,29 +94,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0); } -/* - * Get LUN from CDB. - */ -static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp) -{ - u64 lun; - - lun = lunp[1]; - switch (lunp[0] >> 6) { - case 0: - break; - case 1: - lun |= (lunp[0] & 0x3f) << 8; - break; - default: - return -1; - } - if (lun >= TRANSPORT_MAX_LUNS_PER_TPG) - return -1; - cmd->lun = lun; - return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun); -} - static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd) { struct se_queue_obj *qobj; @@ -418,6 +395,7 @@ static void ft_send_tm(struct ft_cmd *cmd) { struct se_tmr_req *tmr; struct fcp_cmnd *fcp; + struct ft_sess *sess; u8 tm_func; fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp)); @@ -425,13 +403,6 @@ static void ft_send_tm(struct ft_cmd *cmd) switch (fcp->fc_tm_flags) { case FCP_TMF_LUN_RESET: tm_func = TMR_LUN_RESET; - if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) { - ft_dump_cmd(cmd, __func__); - transport_send_check_condition_and_sense(&cmd->se_cmd, - cmd->se_cmd.scsi_sense_reason, 0); - ft_sess_put(cmd->sess); - return; - } break; case FCP_TMF_TGT_RESET: tm_func = TMR_TARGET_WARM_RESET; @@ -463,6 +434,36 @@ static void ft_send_tm(struct ft_cmd *cmd) return; } cmd->se_cmd.se_tmr_req = tmr; + + switch (fcp->fc_tm_flags) { + case FCP_TMF_LUN_RESET: + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun) < 0) { + /* + * Make sure to clean up newly allocated TMR request + * since "unable to handle TMR request because failed + * to get to LUN" + */ + FT_TM_DBG("Failed to get LUN for TMR func %d, " + "se_cmd %p, unpacked_lun %d\n", + tm_func, &cmd->se_cmd, cmd->lun); + ft_dump_cmd(cmd, __func__); + sess = cmd->sess; + transport_send_check_condition_and_sense(&cmd->se_cmd, + cmd->se_cmd.scsi_sense_reason, 0); + transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0); + ft_sess_put(sess); + return; + } + break; + case FCP_TMF_TGT_RESET: + case FCP_TMF_CLR_TASK_SET: + case FCP_TMF_ABT_TASK_SET: + case FCP_TMF_CLR_ACA: + break; + default: + return; + } transport_generic_handle_tmr(&cmd->se_cmd); } @@ -635,7 +636,8 @@ static void ft_send_cmd(struct ft_cmd *cmd) fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd); - ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun); + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + ret = transport_get_lun_for_cmd(&cmd->se_cmd, NULL, cmd->lun); if (ret < 0) { ft_dump_cmd(cmd, __func__); transport_send_check_condition_and_sense(&cmd->se_cmd, diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index 4c3c0efbe13f..8c4a24077d9d 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -203,7 +203,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd) /* XXX For now, initiator will retry */ if (printk_ratelimit()) printk(KERN_ERR "%s: Failed to send frame %p, " - "xid <0x%x>, remaining <0x%x>, " + "xid <0x%x>, remaining %zu, " "lso_max <0x%x>\n", __func__, fp, ep->xid, remaining, lport->lso_max); diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index a3bd57f2ea32..7491e21cc6ae 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -229,7 +229,7 @@ static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id, return NULL; sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { kfree(sess); return NULL; } @@ -332,7 +332,7 @@ void ft_sess_close(struct se_session *se_sess) lport = sess->tport->lport; port_id = sess->port_id; if (port_id == -1) { - mutex_lock(&ft_lport_lock); + mutex_unlock(&ft_lport_lock); return; } FT_SESS_DBG("port_id %x\n", port_id); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index a4c42a75a3bf..19b4ae052af8 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -875,7 +875,8 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, *dp++ = last << 7 | first << 6 | 1; /* EA */ len--; } - memcpy(dp, skb_pull(dlci->skb, len), len); + memcpy(dp, dlci->skb->data, len); + skb_pull(dlci->skb, len); __gsm_data_queue(dlci, msg); if (last) dlci->skb = NULL; @@ -984,10 +985,22 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data, */ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, - u32 modem) + u32 modem, int clen) { int mlines = 0; - u8 brk = modem >> 6; + u8 brk = 0; + + /* The modem status command can either contain one octet (v.24 signals) + or two octets (v.24 signals + break signals). The length field will + either be 2 or 3 respectively. This is specified in section + 5.4.6.3.7 of the 27.010 mux spec. */ + + if (clen == 2) + modem = modem & 0x7f; + else { + brk = modem & 0x7f; + modem = (modem >> 7) & 0x7f; + }; /* Flow control/ready to communicate */ if (modem & MDM_FC) { @@ -1061,7 +1074,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) return; } tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1482,12 +1495,13 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci) * open we shovel the bits down it, if not we drop them. */ -static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) +static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) { /* krefs .. */ struct tty_port *port = &dlci->port; struct tty_struct *tty = tty_port_tty_get(port); unsigned int modem = 0; + int len = clen; if (debug & 16) pr_debug("%d bytes for tty %p\n", len, tty); @@ -1507,7 +1521,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) if (len == 0) return; } - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); /* Line state will go via DLCI 0 controls only */ case 1: default: @@ -2128,8 +2142,8 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) gsm->tty = NULL; } -static unsigned int gsmld_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct gsm_mux *gsm = tty->disc_data; const unsigned char *dp; @@ -2162,8 +2176,6 @@ static unsigned int gsmld_receive_buf(struct tty_struct *tty, } /* FASYNC if needed ? */ /* If clogged call tty_throttle(tty); */ - - return count; } /** diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index cac666314aef..cea56033b34c 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -188,8 +188,8 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait); static int n_hdlc_tty_open(struct tty_struct *tty); static void n_hdlc_tty_close(struct tty_struct *tty); -static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, - const __u8 *cp, char *fp, int count); +static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, + char *fp, int count); static void n_hdlc_tty_wakeup(struct tty_struct *tty); #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) @@ -509,8 +509,8 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty) * Called by tty low level driver when receive data is available. Data is * interpreted as one HDLC frame. */ -static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, - const __u8 *data, char *flags, int count) +static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, + char *flags, int count) { register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); register struct n_hdlc_buf *buf; @@ -521,20 +521,20 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, /* This can happen if stuff comes in on the backup tty */ if (!n_hdlc || tty != n_hdlc->tty) - return -ENODEV; + return; /* verify line is using HDLC discipline */ if (n_hdlc->magic != HDLC_MAGIC) { printk("%s(%d) line not using HDLC discipline\n", __FILE__,__LINE__); - return -EINVAL; + return; } if ( count>maxframe ) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) rx count>maxframesize, data discarded\n", __FILE__,__LINE__); - return -EINVAL; + return; } /* get a free HDLC buffer */ @@ -550,7 +550,7 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) no more rx buffers, data discarded\n", __FILE__,__LINE__); - return -EINVAL; + return; } /* copy received data to HDLC buffer */ @@ -565,8 +565,6 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, if (n_hdlc->tty->fasync != NULL) kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); - return count; - } /* end of n_hdlc_tty_receive() */ /** diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index a4bc39c21a43..5c6c31459a2f 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -139,8 +139,8 @@ static int r3964_ioctl(struct tty_struct *tty, struct file *file, static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old); static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait); -static unsigned int r3964_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count); +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count); static struct tty_ldisc_ops tty_ldisc_N_R3964 = { .owner = THIS_MODULE, @@ -1239,8 +1239,8 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, return result; } -static unsigned int r3964_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct r3964_info *pInfo = tty->disc_data; const unsigned char *p; @@ -1257,8 +1257,6 @@ static unsigned int r3964_receive_buf(struct tty_struct *tty, } } - - return count; } MODULE_LICENSE("GPL"); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 95d0a9c2dd13..c3954fbf6ac4 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -81,6 +81,38 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, return put_user(x, ptr); } +/** + * n_tty_set__room - receive space + * @tty: terminal + * + * Called by the driver to find out how much data it is + * permitted to feed to the line discipline without any being lost + * and thus to manage flow control. Not serialized. Answers for the + * "instant". + */ + +static void n_tty_set_room(struct tty_struct *tty) +{ + /* tty->read_cnt is not read locked ? */ + int left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + int old_left; + + /* + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + */ + if (left <= 0) + left = tty->icanon && !tty->canon_data; + old_left = tty->receive_room; + tty->receive_room = left; + + /* Did this open up the receive buffer? We may need to flip */ + if (left && !old_left) + schedule_work(&tty->buf.work); +} + static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty) { if (tty->read_cnt < N_TTY_BUF_SIZE) { @@ -152,6 +184,7 @@ static void reset_buffer_flags(struct tty_struct *tty) tty->canon_head = tty->canon_data = tty->erasing = 0; memset(&tty->read_flags, 0, sizeof tty->read_flags); + n_tty_set_room(tty); check_unthrottle(tty); } @@ -1327,19 +1360,17 @@ static void n_tty_write_wakeup(struct tty_struct *tty) * calls one at a time and in order (or using flush_to_ldisc) */ -static unsigned int n_tty_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { const unsigned char *p; char *f, flags = TTY_NORMAL; int i; char buf[64]; unsigned long cpuflags; - int left; - int ret = 0; if (!tty->read_buf) - return 0; + return; if (tty->real_raw) { spin_lock_irqsave(&tty->read_lock, cpuflags); @@ -1349,7 +1380,6 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, memcpy(tty->read_buf + tty->read_head, cp, i); tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); tty->read_cnt += i; - ret += i; cp += i; count -= i; @@ -1359,10 +1389,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, memcpy(tty->read_buf + tty->read_head, cp, i); tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); tty->read_cnt += i; - ret += i; spin_unlock_irqrestore(&tty->read_lock, cpuflags); } else { - ret = count; for (i = count, p = cp, f = fp; i; i--, p++) { if (f) flags = *f++; @@ -1390,6 +1418,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, tty->ops->flush_chars(tty); } + n_tty_set_room(tty); + if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); @@ -1402,12 +1432,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, * mode. We don't want to throttle the driver if we're in * canonical mode and don't have a newline yet! */ - left = N_TTY_BUF_SIZE - tty->read_cnt - 1; - - if (left < TTY_THRESHOLD_THROTTLE) + if (tty->receive_room < TTY_THRESHOLD_THROTTLE) tty_throttle(tty); - - return ret; } int is_ignored(int sig) @@ -1451,6 +1477,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { tty->raw = 1; tty->real_raw = 1; + n_tty_set_room(tty); return; } if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) || @@ -1503,6 +1530,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) else tty->real_raw = 0; } + n_tty_set_room(tty); /* The termios change make the tty ready for I/O */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); @@ -1784,7 +1812,10 @@ do_it_again: retval = -ERESTARTSYS; break; } + /* FIXME: does n_tty_set_room need locking ? */ + n_tty_set_room(tty); timeout = schedule_timeout(timeout); + BUG_ON(!tty->read_buf); continue; } __set_current_state(TASK_RUNNING); @@ -1855,8 +1886,10 @@ do_it_again: * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, * we won't get any more characters. */ - if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) + if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) { + n_tty_set_room(tty); check_unthrottle(tty); + } if (b - buf >= minimum) break; @@ -1878,6 +1911,7 @@ do_it_again: } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) goto do_it_again; + n_tty_set_room(tty); return retval; } diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b40f7b90c81d..b4129f53fb1b 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -3318,6 +3318,7 @@ void serial8250_unregister_port(int line) uart->port.flags &= ~UPF_BOOT_AUTOCONF; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = uart_config[uart->port.type].flags; uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 4b4968a294b2..f41b4259ecdd 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -973,7 +973,7 @@ ce4100_serial_setup(struct serial_private *priv, static int pci_omegapci_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { return setup_port(priv, port, 2, idx * 8, 0); @@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, /* * Cronyx Omega PCI (PLX-chip based) */ diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8dc0541feecc..f5f6831b0a64 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/sizes.h> @@ -65,6 +66,30 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) + +#define UART_WA_SAVE_NR 14 + +static void pl011_lockup_wa(unsigned long data); +static const u32 uart_wa_reg[UART_WA_SAVE_NR] = { + ST_UART011_DMAWM, + ST_UART011_TIMEOUT, + ST_UART011_LCRH_RX, + UART011_IBRD, + UART011_FBRD, + ST_UART011_LCRH_TX, + UART011_IFLS, + ST_UART011_XFCR, + ST_UART011_XON1, + ST_UART011_XON2, + ST_UART011_XOFF1, + ST_UART011_XOFF2, + UART011_CR, + UART011_IMSC +}; + +static u32 uart_wa_regdata[UART_WA_SAVE_NR]; +static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0); + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; @@ -72,6 +97,7 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; + bool interrupt_may_hang; /* vendor-specific */ bool dma_threshold; }; @@ -90,9 +116,12 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, + .interrupt_may_hang = true, .dma_threshold = true, }; +static struct uart_amba_port *amba_ports[UART_NR]; + /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -132,6 +161,7 @@ struct uart_amba_port { unsigned int lcrh_rx; /* vendor-specific */ bool autorts; char type[12]; + bool interrupt_may_hang; /* vendor-specific */ #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ bool using_tx_dma; @@ -1008,6 +1038,68 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) #endif +/* + * pl011_lockup_wa + * This workaround aims to break the deadlock situation + * when after long transfer over uart in hardware flow + * control, uart interrupt registers cannot be cleared. + * Hence uart transfer gets blocked. + * + * It is seen that during such deadlock condition ICR + * don't get cleared even on multiple write. This leads + * pass_counter to decrease and finally reach zero. This + * can be taken as trigger point to run this UART_BT_WA. + * + */ +static void pl011_lockup_wa(unsigned long data) +{ + struct uart_amba_port *uap = amba_ports[0]; + void __iomem *base = uap->port.membase; + struct circ_buf *xmit = &uap->port.state->xmit; + struct tty_struct *tty = uap->port.state->port.tty; + int buf_empty_retries = 200; + int loop; + + /* Stop HCI layer from submitting data for tx */ + tty->hw_stopped = 1; + while (!uart_circ_empty(xmit)) { + if (buf_empty_retries-- == 0) + break; + udelay(100); + } + + /* Backup registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]); + + /* Disable UART so that FIFO data is flushed out */ + writew(0x00, uap->port.membase + UART011_CR); + + /* Soft reset UART module */ + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->reset) + plat->reset(); + } + + /* Restore registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + writew(uart_wa_regdata[loop] , + uap->port.membase + uart_wa_reg[loop]); + + /* Initialise the old status of the modem signals */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & + UART01x_FR_MODEM_ANY; + + if (readl(base + UART011_MIS) & 0x2) + printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n"); + + /* Start Tx/Rx */ + tty->hw_stopped = 0; +} + static void pl011_stop_tx(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1158,8 +1250,11 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (status & UART011_TXIS) pl011_tx_chars(uap); - if (pass_counter-- == 0) + if (pass_counter-- == 0) { + if (uap->interrupt_may_hang) + tasklet_schedule(&pl011_lockup_tlet); break; + } status = readw(uap->port.membase + UART011_MIS); } while (status != 0); @@ -1339,6 +1434,14 @@ static int pl011_startup(struct uart_port *port) writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irq(&uap->port.lock); + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + return 0; clk_dis: @@ -1394,6 +1497,15 @@ static void pl011_shutdown(struct uart_port *port) * Shut down the clock producer */ clk_disable(uap->clk); + + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->exit) + plat->exit(); + } + } static void @@ -1700,6 +1812,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + uap->port.uartclk = clk_get_rate(uap->clk); if (options) @@ -1774,6 +1894,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->fifosize; + uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 6d5d6e679fc7..af9b7814965a 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1709,12 +1709,13 @@ static int atmel_serial_resume(struct platform_device *pdev) static int __devinit atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; + struct atmel_uart_data *pdata = pdev->dev.platform_data; void *data; int ret; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - port = &atmel_ports[pdev->id]; + port = &atmel_ports[pdata->num]; port->backup_imr = 0; atmel_init_port(port, pdev); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index a1a0e55d0807..c0b68b9cad91 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -250,6 +250,20 @@ static void bcm_uart_do_rx(struct uart_port *port) /* get overrun/fifo empty information from ier * register */ iestat = bcm_uart_readl(port, UART_IR_REG); + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + unsigned int val; + + /* fifo reset is required to clear + * interrupt */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) break; @@ -284,10 +298,6 @@ static void bcm_uart_do_rx(struct uart_port *port) if (uart_handle_sysrq_char(port, c)) continue; - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } if ((cstat & port->ignore_status_mask) == 0) tty_insert_flip_char(tty, c, flag); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 18f548449c63..96da17868cf3 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -125,7 +125,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device brd->bd_uart_offset = 0x200; brd->bd_dividend = 921600; - brd->re_map_membase = ioremap(brd->membase, 0x1000); + brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0)); if (!brd->re_map_membase) { dev_err(&pdev->dev, "card has no PCI Memory resources, " diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 1bd28450ca40..a764bf99743b 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -421,7 +421,6 @@ static int max3110_main_thread(void *_max) int ret = 0; struct circ_buf *xmit = &max->con_xmit; - init_waitqueue_head(wq); pr_info(PR_FMT "start main thread\n"); do { @@ -823,7 +822,7 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) res = RC_TAG; ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)", res); ret = -ENODEV; goto err_get_page; @@ -838,6 +837,8 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) max->con_xmit.head = 0; max->con_xmit.tail = 0; + init_waitqueue_head(&max->wq); + max->main_thread = kthread_run(max3110_main_thread, max, "max3110_main"); if (IS_ERR(max->main_thread)) { diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index f2cb7503fcb2..465210930890 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1397,6 +1397,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, int fifosize, base_baud; int port_type; struct pch_uart_driver_data *board; + const char *board_name; board = &drv_dat[id->driver_data]; port_type = board->port_type; @@ -1412,7 +1413,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, base_baud = 1843200; /* 1.8432MHz */ /* quirk for CM-iTC board */ - if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + board_name = dmi_get_system_info(DMI_BOARD_NAME); + if (board_name && strstr(board_name, "CM-iTC")) base_baud = 192000000; /* 192.0MHz */ switch (port_type) { diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c index fb2619f93d84..dd194dc80ee9 100644 --- a/drivers/tty/serial/s5pv210.c +++ b/drivers/tty/serial/s5pv210.c @@ -30,7 +30,7 @@ static int s5pv210_serial_setsource(struct uart_port *port, struct s3c2410_uartcfg *cfg = port->dev->platform_data; unsigned long ucon = rd_regl(port, S3C2410_UCON); - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; if (strcmp(clk->name, "pclk") == 0) @@ -55,7 +55,7 @@ static int s5pv210_serial_getsource(struct uart_port *port, clk->divisor = 1; - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; switch (ucon & S5PV210_UCON_CLKMASK) { diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 46de2e075dac..6c9b7cd6778a 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -413,10 +413,8 @@ static void flush_to_ldisc(struct work_struct *work) spin_lock_irqsave(&tty->buf.lock, flags); if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) { - struct tty_buffer *head, *tail = tty->buf.tail; - int seen_tail = 0; + struct tty_buffer *head; while ((head = tty->buf.head) != NULL) { - int copied; int count; char *char_buf; unsigned char *flag_buf; @@ -425,15 +423,6 @@ static void flush_to_ldisc(struct work_struct *work) if (!count) { if (head->next == NULL) break; - /* - There's a possibility tty might get new buffer - added during the unlock window below. We could - end up spinning in here forever hogging the CPU - completely. To avoid this let's have a rest each - time we processed the tail buffer. - */ - if (tail == head) - seen_tail = 1; tty->buf.head = head->next; tty_buffer_free(tty, head); continue; @@ -443,19 +432,17 @@ static void flush_to_ldisc(struct work_struct *work) line discipline as we want to empty the queue */ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) break; + if (!tty->receive_room) + break; + if (count > tty->receive_room) + count = tty->receive_room; char_buf = head->char_buf_ptr + head->read; flag_buf = head->flag_buf_ptr + head->read; + head->read += count; spin_unlock_irqrestore(&tty->buf.lock, flags); - copied = disc->ops->receive_buf(tty, char_buf, + disc->ops->receive_buf(tty, char_buf, flag_buf, count); spin_lock_irqsave(&tty->buf.lock, flags); - - head->read += copied; - - if (copied == 0 || seen_tail) { - schedule_work(&tty->buf.work); - break; - } } clear_bit(TTY_FLUSHING, &tty->flags); } diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5d01d32e2cf0..ef925d581713 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -555,7 +555,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) static int tty_ldisc_wait_idle(struct tty_struct *tty) { int ret; - ret = wait_event_interruptible_timeout(tty_ldisc_idle, + ret = wait_event_timeout(tty_ldisc_idle, atomic_read(&tty->ldisc->users) == 1, 5 * HZ); if (ret < 0) return ret; @@ -763,6 +763,8 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; + WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 67b1d0d7c8ac..fb864e7fcd13 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -332,7 +332,8 @@ int paste_selection(struct tty_struct *tty) continue; } count = sel_buffer_lth - pasted; - count = tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, + count = min(count, tty->receive_room); + tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 395a347f2ebb..dac7676ce21b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1530,6 +1530,8 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ + { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */ + { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a17687c05..34e3da5aa72a 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev) * Just re-enable it without affecting the endpoint toggles. */ usb_enable_interface(udev, intf, false); - } else if (!error && !intf->dev.power.in_suspend) { + } else if (!error && !intf->dev.power.is_prepared) { r = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); if (r < 0) @@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf) } /* Try to rebind the interface */ - if (!intf->dev.power.in_suspend) { + if (!intf->dev.power.is_prepared) { intf->needs_binding = 0; rc = device_attach(&intf->dev); if (rc < 0) @@ -1107,7 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev, if (intf->condition == USB_INTERFACE_UNBOUND) { /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) { + if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) { usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); intf->needs_altsetting0 = 0; @@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) for (i = n - 1; i >= 0; --i) { intf = udev->actconfig->interface[i]; status = usb_suspend_interface(udev, intf, msg); + + /* Ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; if (status != 0) break; } } - if (status == 0) + if (status == 0) { status = usb_suspend_device(udev, msg); + /* Again, ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; + } + /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79a58c3a2e2a..a428aa080a36 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, data, sizeof(*data), USB_STS_TIMEOUT); @@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1, data, sizeof(*data), USB_STS_TIMEOUT); @@ -1632,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; int i; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); if (!udev) { pr_debug ("%s nodev\n", __func__); @@ -1659,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev) * so that the hardware is now fully quiesced. */ dev_dbg (&udev->dev, "unregistering device\n"); + mutex_lock(hcd->bandwidth_mutex); usb_disable_device(udev, 0); + mutex_unlock(hcd->bandwidth_mutex); usb_hcd_synchronize_unlinks(udev); usb_remove_ep_devs(&udev->ep0); @@ -2360,6 +2365,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + + /* System sleep transitions should never fail */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; } else { /* device has up to 10 msec to fully suspend */ dev_dbg(&udev->dev, "usb %ssuspend\n", @@ -2609,16 +2618,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *hdev = hub->hdev; unsigned port1; - /* fail if children aren't already suspended */ + /* Warn if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; udev = hdev->children [port1-1]; if (udev && udev->can_submit) { - if (!(msg.event & PM_EVENT_AUTO)) - dev_dbg(&intf->dev, "port %d nyet suspended\n", - port1); - return -EBUSY; + dev_warn(&intf->dev, "port %d nyet suspended\n", port1); + if (msg.event & PM_EVENT_AUTO) + return -EBUSY; } } diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 1b125c224dcf..2278dad886e2 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -389,7 +389,6 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry) mutex_unlock(&inode->i_mutex); if (!error) d_delete(dentry); - dput(dentry); return error; } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5701e857392b..0b5ec234c787 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1135,15 +1135,26 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, * Deallocates hcd/hardware state for the endpoints (nuking all or most * pending urbs) and usbcore state for the interfaces, so that usbcore * must usb_set_configuration() before any interfaces could be used. + * + * Must be called with hcd->bandwidth_mutex held. */ void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) */ if (dev->actconfig) { + /* + * FIXME: In order to avoid self-deadlock involving the + * bandwidth_mutex, we have to mark all the interfaces + * before unregistering any of them. + */ + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) + dev->actconfig->interface[i]->unregistering = 1; + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *interface; @@ -1153,7 +1164,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); - interface->unregistering = 1; remove_intf_ep_devs(interface); device_del(&interface->dev); } @@ -1172,6 +1182,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + /* Second pass: remove endpoint pointers */ + } for (i = skip_ep0; i < 16; ++i) { usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); @@ -1273,6 +1293,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) interface); return -EINVAL; } + if (iface->unregistering) + return -ENODEV; alt = usb_altnum_to_altsetting(iface, alternate); if (!alt) { @@ -1727,6 +1749,7 @@ free_interfaces: /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ + mutex_lock(hcd->bandwidth_mutex); if (dev->state != USB_STATE_ADDRESS) usb_disable_device(dev, 1); /* Skip ep0 */ @@ -1739,7 +1762,6 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ - mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { mutex_unlock(hcd->bandwidth_mutex); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 58456d1aec21..029e288805b6 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -632,13 +632,10 @@ config USB_DUMMY_HCD endchoice +# Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED bool depends on USB_GADGET - default n - help - Means that gadget drivers should include extra descriptors - and code to handle dual-speed controllers. # # USB Gadget Drivers diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 6e42aab75806..95e8138cd48f 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -60,6 +60,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <asm/system.h> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 41dc093c0a1b..f4690ffcb489 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -38,6 +38,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <mach/hardware.h> diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 61ff927928ab..d3dcabc1a5fc 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1906,6 +1906,7 @@ static int dummy_hcd_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; the_controller = hcd_to_dummy (hcd); + hcd->has_tt = 1; retval = usb_add_hcd(hcd, 0, 0); if (retval != 0) { diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 2cd9a60c7f3a..4e4833168087 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -46,7 +46,6 @@ #include <asm/system.h> #include <asm/unaligned.h> #include <asm/dma.h> -#include <asm/cacheflush.h> #include "fsl_usb2_udc.h" @@ -118,6 +117,17 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p); #define fsl_readl(p) (*_fsl_readl)((p)) #define fsl_writel(v, p) (*_fsl_writel)((v), (p)) +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) +{ + if (pdata->big_endian_mmio) { + _fsl_readl = _fsl_readl_be; + _fsl_writel = _fsl_writel_be; + } else { + _fsl_readl = _fsl_readl_le; + _fsl_writel = _fsl_writel_le; + } +} + static inline u32 cpu_to_hc32(const u32 x) { return udc_controller->pdata->big_endian_desc @@ -132,6 +142,8 @@ static inline u32 hc32_to_cpu(const u32 x) : le32_to_cpu((__force __le32)x); } #else /* !CONFIG_PPC32 */ +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {} + #define fsl_readl(addr) readl(addr) #define fsl_writel(val32, addr) writel(val32, addr) #define cpu_to_hc32(x) cpu_to_le32(x) @@ -1277,6 +1289,11 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + if (fsl_req_to_dtd(req) == 0) fsl_queue_td(ep, req); else @@ -1348,9 +1365,6 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, /* Fill in the reqest structure */ *((u16 *) req->req.buf) = cpu_to_le16(tmp); - /* flush cache for the req buffer */ - flush_dcache_range((u32)req->req.buf, (u32)req->req.buf + 8); - req->ep = ep; req->req.length = 2; req->req.status = -EINPROGRESS; @@ -1358,6 +1372,11 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + /* prime the data phase */ if ((fsl_req_to_dtd(req) == 0)) fsl_queue_td(ep, req); @@ -2354,7 +2373,6 @@ static int __init struct_udc_setup(struct fsl_udc *udc, struct fsl_req, req); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2470,13 +2488,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) } /* Set accessors only after pdata->init() ! */ - if (pdata->big_endian_mmio) { - _fsl_readl = _fsl_readl_be; - _fsl_writel = _fsl_writel_be; - } else { - _fsl_readl = _fsl_readl_le; - _fsl_writel = _fsl_writel_le; - } + fsl_set_accessors(pdata); #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a01383f71f38..a56876aaf76c 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -431,8 +431,10 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* halt any endpoint by doing a "wrong direction" i/o call */ if (!usb_endpoint_dir_in(&data->desc)) { - if (usb_endpoint_xfer_isoc(&data->desc)) + if (usb_endpoint_xfer_isoc(&data->desc)) { + mutex_unlock(&data->lock); return -EINVAL; + } DBG (data->dev, "%s halt\n", data->name); spin_lock_irq (&data->dev->lock); if (likely (data->ep != NULL)) diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index b62b2640deb0..b1a8146b9d50 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -2083,7 +2083,7 @@ out: } #ifdef CONFIG_PM -static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) +static int mv_udc_suspend(struct device *_dev) { struct mv_udc *udc = the_controller; @@ -2092,7 +2092,7 @@ static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) return 0; } -static int mv_udc_resume(struct platform_device *_dev) +static int mv_udc_resume(struct device *_dev) { struct mv_udc *udc = the_controller; int retval; @@ -2100,7 +2100,7 @@ static int mv_udc_resume(struct platform_device *_dev) retval = mv_udc_phy_init(udc->phy_regs); if (retval) { dev_err(_dev, "phy initialization error %d\n", retval); - goto error; + return retval; } udc_reset(udc); ep0_reset(udc); @@ -2122,7 +2122,7 @@ static struct platform_driver udc_driver = { .owner = THIS_MODULE, .name = "pxa-u2o", #ifdef CONFIG_PM - .pm = mv_udc_pm_ops, + .pm = &mv_udc_pm_ops, #endif }, }; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 24696f7fa6a9..476d88e1ae97 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -63,6 +63,7 @@ #include <linux/device.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 365c02fc25fc..774545494cf2 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2216,7 +2216,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); -lubbock_fail0: goto err_irq_lub; } retval = request_irq(LUBBOCK_USB_IRQ, @@ -2226,7 +2225,6 @@ lubbock_fail0: if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_IRQ, retval); - free_irq(LUBBOCK_USB_DISC_IRQ, dev); goto lubbock_fail0; } } else @@ -2236,10 +2234,11 @@ lubbock_fail0: return 0; #ifdef CONFIG_ARCH_LUBBOCK +lubbock_fail0: free_irq(LUBBOCK_USB_DISC_IRQ, dev); err_irq_lub: -#endif free_irq(irq, dev); +#endif err_irq1: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index acb9cc418df9..0dfee282878a 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2680,9 +2680,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, writel(0, hsotg->regs + S3C_DAINTMSK); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* enable in and out endpoint interrupts */ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); @@ -2701,7 +2701,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, udelay(10); /* see openiboot */ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by writing to the EPCTL register.. */ @@ -2721,9 +2721,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, s3c_hsotg_enqueue_setup(hsotg); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* clear global NAKs */ writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, @@ -2921,9 +2921,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) /* setup fifos */ - dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + S3C_GRXFSIZ), + readl(hsotg->regs + S3C_GNPTXFSIZ)); s3c_hsotg_init_fifo(hsotg); @@ -2945,6 +2945,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { +#ifdef DEBUG struct device *dev = hsotg->dev; void __iomem *regs = hsotg->regs; u32 val; @@ -2987,6 +2988,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); +#endif } diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index cfe3cf56d6bd..d5e3e1e58626 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <mach/regs-s3c2443-clock.h> #include <plat/udc.h> @@ -1301,7 +1302,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); - return PTR_ERR(hsudc->uclk); + ret = PTR_ERR(hsudc->uclk); + goto err_clk; } clk_enable(hsudc->uclk); @@ -1310,7 +1312,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) disable_irq(hsudc->irq); local_irq_enable(); return 0; - +err_clk: + free_irq(hsudc->irq, hsudc); err_irq: iounmap(hsudc->regs); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 6d8b04061d5d..100f2635cf0a 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -36,6 +36,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/prefetch.h> #include <linux/debugfs.h> #include <linux/seq_file.h> diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c index 98cc8a13169c..aa248c2f2c60 100644 --- a/drivers/usb/host/ehci-ath79.c +++ b/drivers/usb/host/ehci-ath79.c @@ -44,7 +44,6 @@ static int ehci_ath79_init(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct platform_device *pdev = to_platform_device(hcd->self.controller); const struct platform_device_id *id; - int hclength; int ret; id = platform_get_device_id(pdev); @@ -53,20 +52,23 @@ static int ehci_ath79_init(struct usb_hcd *hcd) return -EINVAL; } - hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); switch (id->driver_data) { case EHCI_ATH79_IP_V1: ehci->has_synopsys_hc_bug = 1; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + hclength; + ehci->regs = hcd->regs + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; case EHCI_ATH79_IP_V2: hcd->has_tt = 1; ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + hclength; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; default: diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b435ed67dd5c..f8030ee928e8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1,4 +1,8 @@ /* + * Enhanced Host Controller Interface (EHCI) driver for USB. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * * Copyright (c) 2000-2004 by David Brownell * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9e6e454c625..55d3d5859ac5 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1555,7 +1555,7 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, /* We need to forcefully reclaim the slot since some transfers never return, e.g. interrupt transfers and NAKed bulk transfers. */ - if (usb_pipebulk(urb->pipe)) { + if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); skip_map |= (1 << qh->slot); reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9aa10bdf3918..f9cf3f04b742 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1,5 +1,7 @@ /* - * OHCI HCD (Host Controller Driver) for USB. + * Open Host Controller Interface (OHCI) driver for USB. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index afef7b0a4195..80be5472783a 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return PTR_ERR(usb_clk); hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); - if (!hcd) - return -ENOMEM; + if (!hcd) { + retval = -ENOMEM; + goto err0; + } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); + err0: clk_put(usb_clk); return retval; } diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index db6f8b9c19b6..4586369dda00 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2517,6 +2517,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) INIT_LIST_HEAD(&r8a66597->child_device); hcd->rsrc_start = res->start; + hcd->has_tt = 1; ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger); if (ret != 0) { diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 2e0486178dbe..1f50b4468e87 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) { - case 0: + case SLOT_STATE_ENABLED: return "enabled/disabled"; - case 1: + case SLOT_STATE_DEFAULT: return "default"; - case 2: + case SLOT_STATE_ADDRESSED: return "addressed"; - case 3: + case SLOT_STATE_CONFIGURED: return "configured"; default: return "reserved"; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 26caba4c1950..fcb7f7efc86d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; if (interval != ep->desc.bInterval - 1) dev_warn(&udev->dev, - "ep %#x - rounding interval to %d microframes\n", + "ep %#x - rounding interval to %d %sframes\n", ep->desc.bEndpointAddress, - 1 << interval); + 1 << interval, + udev->speed == USB_SPEED_FULL ? "" : "micro"); + + if (udev->speed == USB_SPEED_FULL) { + /* + * Full speed isoc endpoints specify interval in frames, + * not microframes. We are using microframes everywhere, + * so adjust accordingly. + */ + interval += 3; /* 1 frame = 2^3 uframes */ + } return interval; } @@ -1205,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; - if (!max_packet) - xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n"); ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); break; case USB_SPEED_HIGH: diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c408e9f6a707..cb16de213f64 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -29,6 +29,9 @@ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_VENDOR_ID_ETRON 0x1b6f +#define PCI_DEVICE_ID_ASROCK_P67 0x7023 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -106,12 +109,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && - pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && - pdev->revision == 0x0) { + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) { + if (pdev->revision == 0x0) { xhci->quirks |= XHCI_RESET_EP_QUIRK; xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint\n"); + } + /* Fresco Logic confirms: all revisions of this chip do not + * support MSI, even though some of them claim to in their PCI + * capabilities. + */ + xhci->quirks |= XHCI_BROKEN_MSI; + xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " + "has broken MSI implementation\n", + pdev->revision); } + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; @@ -124,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; } + if (pdev->vendor == PCI_VENDOR_ID_ETRON && + pdev->device == PCI_DEVICE_ID_ASROCK_P67) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + } /* Make sure the HC is halted. */ retval = xhci_halt(xhci); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cc1485bfed38..70cacbbe7fb9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, frame->status = -EOVERFLOW; skip_td = true; break; + case COMP_DEV_ERR: case COMP_STALL: frame->status = -EPROTO; skip_td = true; @@ -1767,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, } } - if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS) - *status = 0; - return finish_td(xhci, td, event_trb, event, ep, status, false); } @@ -1782,13 +1780,12 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, struct usb_iso_packet_descriptor *frame; int idx; - ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); urb_priv = td->urb->hcpriv; idx = urb_priv->td_cnt; frame = &td->urb->iso_frame_desc[idx]; - /* The transfer is partly done */ - *status = -EXDEV; + /* The transfer is partly done. */ frame->status = -EXDEV; /* calc actual length */ @@ -2016,6 +2013,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), ep_index); goto cleanup; + case COMP_DEV_ERR: + xhci_warn(xhci, "WARN: detect an incompatible device"); + status = -EPROTO; + break; case COMP_MISSED_INT: /* * When encounter missed service error, one or more isoc tds @@ -2063,6 +2064,20 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, td->last_trb, event_dma); + + /* + * Skip the Force Stopped Event. The event_trb(event_dma) of FSE + * is not in the current TD pointed by ep_ring->dequeue because + * that the hardware dequeue pointer still at the previous TRB + * of the current TD. The previous TRB maybe a Link TD or the + * last TRB of the previous TD. The command completion handle + * will take care the rest. + */ + if (!event_seg && trb_comp_code == COMP_STOP_INVAL) { + ret = 0; + goto cleanup; + } + if (!event_seg) { if (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { @@ -2158,6 +2173,11 @@ cleanup: urb->transfer_buffer_length, status); spin_unlock(&xhci->lock); + /* EHCI, UHCI, and OHCI always unconditionally set the + * urb->status of an isochronous endpoint to 0. + */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + status = 0; usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d9660eb97eb9..f5fe1ac301ab 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd) free_irq(hcd->irq, hcd); hcd->irq = -1; + /* Some Fresco Logic host controllers advertise MSI, but fail to + * generate interrupts. Don't even try to enable MSI. + */ + if (xhci->quirks & XHCI_BROKEN_MSI) + goto legacy_irq; + ret = xhci_setup_msix(xhci); if (ret) /* fall back to msi*/ ret = xhci_setup_msi(xhci); if (ret) { +legacy_irq: /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); @@ -752,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) msleep(100); spin_lock_irq(&xhci->lock); + if (xhci->quirks & XHCI_RESET_ON_RESUME) + hibernated = true; if (!hibernated) { /* step 1: restore register */ @@ -1394,6 +1403,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, u32 added_ctxs; unsigned int last_ctx; u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; int ret = 0; ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); @@ -1418,11 +1428,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return 0; } - in_ctx = xhci->devs[udev->slot_id]->in_ctx; - out_ctx = xhci->devs[udev->slot_id]->out_ctx; + virt_dev = xhci->devs[udev->slot_id]; + in_ctx = virt_dev->in_ctx; + out_ctx = virt_dev->out_ctx; ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + + /* If this endpoint is already in use, and the upper layers are trying + * to add it again without dropping it, reject the addition. + */ + if (virt_dev->eps[ep_index].ring && + !(le32_to_cpu(ctrl_ctx->drop_flags) & + xhci_get_endpoint_flag(&ep->desc))) { + xhci_warn(xhci, "Trying to add endpoint 0x%x " + "without dropping it.\n", + (unsigned int) ep->desc.bEndpointAddress); + return -EINVAL; + } + /* If the HCD has already noted the endpoint is enabled, * ignore this request. */ @@ -1438,8 +1462,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * process context, not interrupt context (or so documenation * for usb_set_interface() and usb_set_configuration() claim). */ - if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], - udev, ep, GFP_NOIO) < 0) { + if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) { dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", __func__, ep->desc.bEndpointAddress); return -ENOMEM; @@ -1530,6 +1553,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, "and endpoint is not disabled.\n"); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint " + "configure command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); ret = 0; @@ -1564,6 +1592,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate " + "context command.\n"); + ret = -ENODEV; + break; case COMP_MEL_ERR: /* Max Exit Latency too large error */ dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n"); @@ -1849,8 +1882,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; ++i) { - if ((ctrl_ctx->drop_flags & (1 << (i + 1))) && - !(ctrl_ctx->add_flags & (1 << (i + 1)))) + if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && + !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } xhci_zero_in_ctx(xhci, virt_dev); @@ -2467,6 +2500,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_command *reset_device_cmd; int timeleft; int last_freed_endpoint; + struct xhci_slot_ctx *slot_ctx; ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); if (ret <= 0) @@ -2499,6 +2533,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + /* If device is not setup, there is no point in resetting it */ + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == + SLOT_STATE_DISABLED) + return 0; + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); /* Allocate the command structure that holds the struct completion. * Assume we're in process context, since the normal device reset @@ -2839,6 +2879,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) dev_warn(&udev->dev, "Device not responding to set address.\n"); ret = -EPROTO; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for address " + "device command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: xhci_dbg(xhci, "Successful Address Device command\n"); break; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ac0196e7fcf1..d8bbf5ccb10d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -560,6 +560,11 @@ struct xhci_slot_ctx { #define SLOT_STATE (0x1f << 27) #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27) +#define SLOT_STATE_DISABLED 0 +#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED +#define SLOT_STATE_DEFAULT 1 +#define SLOT_STATE_ADDRESSED 2 +#define SLOT_STATE_CONFIGURED 3 /** * struct xhci_ep_ctx @@ -869,6 +874,8 @@ struct xhci_transfer_event { #define COMP_PING_ERR 20 /* Event Ring is full */ #define COMP_ER_FULL 21 +/* Incompatible Device Error */ +#define COMP_DEV_ERR 22 /* Missed Service Error - HC couldn't service an isoc ep within interval */ #define COMP_MISSED_INT 23 /* Successfully stopped command ring */ @@ -1302,6 +1309,8 @@ struct xhci_hcd { * commands. */ #define XHCI_EP_LIMIT_QUIRK (1 << 5) +#define XHCI_BROKEN_MSI (1 << 6) +#define XHCI_RESET_ON_RESUME (1 << 7) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ab8e1001e5e2..c71b0372786e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -96,6 +96,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/kobject.h> +#include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0a50a35e1853..6aeb363e63e7 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1524,6 +1524,12 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) csr = musb_readw(epio, MUSB_TXCSR); if (csr & MUSB_TXCSR_FIFONOTEMPTY) { csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS; + /* + * Setting both TXPKTRDY and FLUSHFIFO makes controller + * to interrupt current FIFO loading, but not flushing + * the already loaded ones. + */ + csr &= ~MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */ musb_writew(epio, MUSB_TXCSR, csr); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 7295e316bdfc..8b2473fa0f47 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1575,7 +1575,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) /* even if there was an error, we did the dma * for iso_frame_desc->length */ - if (d->status != EILSEQ && d->status != -EOVERFLOW) + if (d->status != -EILSEQ && d->status != -EOVERFLOW) d->status = 0; if (++qh->iso_idx >= urb->number_of_packets) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 206cfabc9286..547486ccd059 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1380,5 +1380,6 @@ void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + kfree(gpriv->uep); kfree(gpriv); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e8dbde55f6c5..2e06b90aa1f8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -179,6 +179,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -647,6 +648,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, @@ -847,7 +849,8 @@ static const char *ftdi_chip_name[] = { [FT2232C] = "FT2232C", [FT232RL] = "FT232RL", [FT2232H] = "FT2232H", - [FT4232H] = "FT4232H" + [FT4232H] = "FT4232H", + [FT232H] = "FT232H" }; @@ -1167,6 +1170,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, break; case FT2232H: /* FT2232H chip */ case FT4232H: /* FT4232H chip */ + case FT232H: /* FT232H chip */ if ((baud <= 12000000) & (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { @@ -1428,9 +1432,12 @@ static void ftdi_determine_type(struct usb_serial_port *port) } else if (version < 0x600) { /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; - } else { - /* Assume it's an FT232R */ + } else if (version < 0x900) { + /* Assume it's an FT232RL */ priv->chip_type = FT232RL; + } else { + /* Assume it's an FT232H */ + priv->chip_type = FT232H; } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); } @@ -1558,7 +1565,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H)) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H)) { retval = device_create_file(&port->dev, &dev_attr_latency_timer); } @@ -1579,7 +1587,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H) { device_remove_file(&port->dev, &dev_attr_latency_timer); } } @@ -2211,6 +2220,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) case FT232RL: case FT2232H: case FT4232H: + case FT232H: len = 2; break; default: diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 213fe3d61282..19584faa86f9 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -156,7 +156,8 @@ enum ftdi_chip_type { FT2232C = 4, FT232RL = 5, FT2232H = 6, - FT4232H = 7 + FT4232H = 7, + FT232H = 8 }; enum ftdi_sio_baudrate { diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1d946cd238ba..19156d1049fe 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -22,6 +22,7 @@ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ @@ -351,6 +352,7 @@ */ #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 +#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 /* * Linx Technologies product ids diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 318dd00040a3..60b25d8ea0e2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -311,10 +311,6 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff -/* ZTE PRODUCTS -- alternate vendor ID */ -#define ZTE_VENDOR_ID2 0x1d6b -#define ZTE_PRODUCT_MF_330 0x0002 - #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -340,11 +336,12 @@ static void option_instat_callback(struct urb *urb); #define TOSHIBA_PRODUCT_G450 0x0d45 #define ALINK_VENDOR_ID 0x1e0e +#define ALINK_PRODUCT_PH300 0x9100 #define ALINK_PRODUCT_3GU 0x9200 /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb -#define ALCATEL_PRODUCT_X060S 0x0000 +#define ALCATEL_PRODUCT_X060S_X200 0x0000 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -379,6 +376,9 @@ static void option_instat_callback(struct urb *urb); * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Zoom */ +#define ZOOM_PRODUCT_4597 0x9607 + /* Haier products */ #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 @@ -432,6 +432,20 @@ static const struct option_blacklist_info four_g_w14_blacklist = { .reason = OPTION_BLACKLIST_SENDSETUP }; +static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 }; +static const struct option_blacklist_info alcatel_x200_blacklist = { + .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup), + .ifaceinfo = alcatel_x200_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + +static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 }; +static const struct option_blacklist_info zte_k3765_z_blacklist = { + .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup), + .ifaceinfo = zte_k3765_z_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -916,13 +930,13 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -935,13 +949,17 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, + { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), + .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist + }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, /* Pirelli */ { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)}, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c6d92a530086..ea8445689c85 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1745,6 +1745,7 @@ static int ti_download_firmware(struct ti_device *tdev) } if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); + release_firmware(fw_p); return -ENOENT; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 00418995d8e9..e8ae21b2d387 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -819,6 +819,35 @@ Retry_Sense: } } + /* + * Some devices don't work or return incorrect data the first + * time they get a READ(10) command, or for the first READ(10) + * after a media change. If the INITIAL_READ10 flag is set, + * keep track of whether READ(10) commands succeed. If the + * previous one succeeded and this one failed, set the REDO_READ10 + * flag to force a retry. + */ + if (unlikely((us->fflags & US_FL_INITIAL_READ10) && + srb->cmnd[0] == READ_10)) { + if (srb->result == SAM_STAT_GOOD) { + set_bit(US_FLIDX_READ10_WORKED, &us->dflags); + } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) { + clear_bit(US_FLIDX_READ10_WORKED, &us->dflags); + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + } + + /* + * Next, if the REDO_READ10 flag is set, return a result + * code that will cause the SCSI core to retry the READ(10) + * command immediately. + */ + if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) { + clear_bit(US_FLIDX_REDO_READ10, &us->dflags); + srb->result = DID_IMM_RETRY << 16; + srb->sense_buffer[0] = 0; + } + } + /* Did we transfer less than the minimum amount required? */ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c1602b8c5594..ccff3483eebc 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Paul Hartman <paul.hartman+linux@gmail.com> + * This card reader returns "Illegal Request, Logical Block Address + * Out of Range" for the first READ(10) after a new card is inserted. + */ +UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, + "Feiya", + "SD/SDHC Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command @@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Reported by Sven Geggus <sven-usbst@geggus.net> + * This encrypted pen drive returns bogus data for the initial READ(10). + */ +UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, + "Corsair", + "Padlock v2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* Patch by Richard Schütz <r.schtz@t-online.de> * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee7ac42e08f..0ca095820f3e 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us) US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | - US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16); + US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | + US_FL_INITIAL_READ10); p = quirks; while (*p) { @@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us) case 'm': f |= US_FL_MAX_SECTORS_64; break; + case 'n': + f |= US_FL_INITIAL_READ10; + break; case 'o': f |= US_FL_CAPACITY_OK; break; @@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us) if (result) goto BadDevice; + /* + * If the device returns invalid data for the first READ(10) + * command, indicate the command should be retried. + */ + if (us->fflags & US_FL_INITIAL_READ10) + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + /* Acquire all the other resources and add the host */ result = usb_stor_acquire_resources(us); if (result) diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 89d3bfff98df..7b0f2113632e 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -73,6 +73,8 @@ struct us_unusual_dev { #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ #define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ +#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ #define USB_STOR_STRING_LEN 32 diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 2f7c76a85e53..e224a92baa16 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -144,7 +144,7 @@ static void handle_tx(struct vhost_net *net) } mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); if (wmem < sock->sk->sk_sndbuf / 2) tx_poll_stop(net); @@ -166,8 +166,8 @@ static void handle_tx(struct vhost_net *net) set_bit(SOCK_ASYNC_NOSPACE, &sock->flags); break; } - if (unlikely(vhost_enable_notify(vq))) { - vhost_disable_notify(vq); + if (unlikely(vhost_enable_notify(&net->dev, vq))) { + vhost_disable_notify(&net->dev, vq); continue; } break; @@ -315,7 +315,7 @@ static void handle_rx(struct vhost_net *net) return; mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); vhost_hlen = vq->vhost_hlen; sock_hlen = vq->sock_hlen; @@ -334,10 +334,10 @@ static void handle_rx(struct vhost_net *net) break; /* OK, now we need to know about added descriptors. */ if (!headcount) { - if (unlikely(vhost_enable_notify(vq))) { + if (unlikely(vhost_enable_notify(&net->dev, vq))) { /* They have slipped one in as we were * doing that: check again. */ - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); continue; } /* Nothing new? Wait for eventfd to tell us diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index 099f30230d06..734e1d74ad80 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -49,7 +49,7 @@ static void handle_vq(struct vhost_test *n) return; mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&n->dev, vq); for (;;) { head = vhost_get_vq_desc(&n->dev, vq, vq->iov, @@ -61,8 +61,8 @@ static void handle_vq(struct vhost_test *n) break; /* Nothing new? Wait for eventfd to tell us they refilled. */ if (head == vq->num) { - if (unlikely(vhost_enable_notify(vq))) { - vhost_disable_notify(vq); + if (unlikely(vhost_enable_notify(&n->dev, vq))) { + vhost_disable_notify(&n->dev, vq); continue; } break; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 7aa4eea930f1..ea966b356352 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -37,6 +37,9 @@ enum { VHOST_MEMORY_F_LOG = 0x1, }; +#define vhost_used_event(vq) ((u16 __user *)&vq->avail->ring[vq->num]) +#define vhost_avail_event(vq) ((u16 __user *)&vq->used->ring[vq->num]) + static void vhost_poll_func(struct file *file, wait_queue_head_t *wqh, poll_table *pt) { @@ -161,6 +164,8 @@ static void vhost_vq_reset(struct vhost_dev *dev, vq->last_avail_idx = 0; vq->avail_idx = 0; vq->last_used_idx = 0; + vq->signalled_used = 0; + vq->signalled_used_valid = false; vq->used_flags = 0; vq->log_used = false; vq->log_addr = -1ull; @@ -489,16 +494,17 @@ static int memory_access_ok(struct vhost_dev *d, struct vhost_memory *mem, return 1; } -static int vq_access_ok(unsigned int num, +static int vq_access_ok(struct vhost_dev *d, unsigned int num, struct vring_desc __user *desc, struct vring_avail __user *avail, struct vring_used __user *used) { + size_t s = vhost_has_feature(d, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; return access_ok(VERIFY_READ, desc, num * sizeof *desc) && access_ok(VERIFY_READ, avail, - sizeof *avail + num * sizeof *avail->ring) && + sizeof *avail + num * sizeof *avail->ring + s) && access_ok(VERIFY_WRITE, used, - sizeof *used + num * sizeof *used->ring); + sizeof *used + num * sizeof *used->ring + s); } /* Can we log writes? */ @@ -514,9 +520,11 @@ int vhost_log_access_ok(struct vhost_dev *dev) /* Verify access for write logging. */ /* Caller should have vq mutex and device mutex */ -static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base) +static int vq_log_access_ok(struct vhost_dev *d, struct vhost_virtqueue *vq, + void __user *log_base) { struct vhost_memory *mp; + size_t s = vhost_has_feature(d, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; mp = rcu_dereference_protected(vq->dev->memory, lockdep_is_held(&vq->mutex)); @@ -524,15 +532,15 @@ static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base) vhost_has_feature(vq->dev, VHOST_F_LOG_ALL)) && (!vq->log_used || log_access_ok(log_base, vq->log_addr, sizeof *vq->used + - vq->num * sizeof *vq->used->ring)); + vq->num * sizeof *vq->used->ring + s)); } /* Can we start vq? */ /* Caller should have vq mutex and device mutex */ int vhost_vq_access_ok(struct vhost_virtqueue *vq) { - return vq_access_ok(vq->num, vq->desc, vq->avail, vq->used) && - vq_log_access_ok(vq, vq->log_base); + return vq_access_ok(vq->dev, vq->num, vq->desc, vq->avail, vq->used) && + vq_log_access_ok(vq->dev, vq, vq->log_base); } static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) @@ -577,6 +585,7 @@ static int init_used(struct vhost_virtqueue *vq, if (r) return r; + vq->signalled_used_valid = false; return get_user(vq->last_used_idx, &used->idx); } @@ -674,7 +683,7 @@ static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp) * If it is not, we don't as size might not have been setup. * We will verify when backend is configured. */ if (vq->private_data) { - if (!vq_access_ok(vq->num, + if (!vq_access_ok(d, vq->num, (void __user *)(unsigned long)a.desc_user_addr, (void __user *)(unsigned long)a.avail_user_addr, (void __user *)(unsigned long)a.used_user_addr)) { @@ -818,7 +827,7 @@ long vhost_dev_ioctl(struct vhost_dev *d, unsigned int ioctl, unsigned long arg) vq = d->vqs + i; mutex_lock(&vq->mutex); /* If ring is inactive, will check when it's enabled. */ - if (vq->private_data && !vq_log_access_ok(vq, base)) + if (vq->private_data && !vq_log_access_ok(d, vq, base)) r = -EFAULT; else vq->log_base = base; @@ -1219,6 +1228,10 @@ int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq, /* On success, increment avail index. */ vq->last_avail_idx++; + + /* Assume notifications from guest are disabled at this point, + * if they aren't we would need to update avail_event index. */ + BUG_ON(!(vq->used_flags & VRING_USED_F_NO_NOTIFY)); return head; } @@ -1267,6 +1280,12 @@ int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len) eventfd_signal(vq->log_ctx, 1); } vq->last_used_idx++; + /* If the driver never bothers to signal in a very long while, + * used index might wrap around. If that happens, invalidate + * signalled_used index we stored. TODO: make sure driver + * signals at least once in 2^16 and remove this. */ + if (unlikely(vq->last_used_idx == vq->signalled_used)) + vq->signalled_used_valid = false; return 0; } @@ -1275,6 +1294,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, unsigned count) { struct vring_used_elem __user *used; + u16 old, new; int start; start = vq->last_used_idx % vq->num; @@ -1292,7 +1312,14 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, ((void __user *)used - (void __user *)vq->used), count * sizeof *used); } - vq->last_used_idx += count; + old = vq->last_used_idx; + new = (vq->last_used_idx += count); + /* If the driver never bothers to signal in a very long while, + * used index might wrap around. If that happens, invalidate + * signalled_used index we stored. TODO: make sure driver + * signals at least once in 2^16 and remove this. */ + if (unlikely((u16)(new - vq->signalled_used) < (u16)(new - old))) + vq->signalled_used_valid = false; return 0; } @@ -1331,29 +1358,47 @@ int vhost_add_used_n(struct vhost_virtqueue *vq, struct vring_used_elem *heads, return r; } -/* This actually signals the guest, using eventfd. */ -void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq) +static bool vhost_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { - __u16 flags; - + __u16 old, new, event; + bool v; /* Flush out used index updates. This is paired * with the barrier that the Guest executes when enabling * interrupts. */ smp_mb(); - if (__get_user(flags, &vq->avail->flags)) { - vq_err(vq, "Failed to get flags"); - return; + if (vhost_has_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY) && + unlikely(vq->avail_idx == vq->last_avail_idx)) + return true; + + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + __u16 flags; + if (__get_user(flags, &vq->avail->flags)) { + vq_err(vq, "Failed to get flags"); + return true; + } + return !(flags & VRING_AVAIL_F_NO_INTERRUPT); } + old = vq->signalled_used; + v = vq->signalled_used_valid; + new = vq->signalled_used = vq->last_used_idx; + vq->signalled_used_valid = true; - /* If they don't want an interrupt, don't signal, unless empty. */ - if ((flags & VRING_AVAIL_F_NO_INTERRUPT) && - (vq->avail_idx != vq->last_avail_idx || - !vhost_has_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY))) - return; + if (unlikely(!v)) + return true; + if (get_user(event, vhost_used_event(vq))) { + vq_err(vq, "Failed to get used event idx"); + return true; + } + return vring_need_event(event, new, old); +} + +/* This actually signals the guest, using eventfd. */ +void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq) +{ /* Signal the Guest tell them we used something up. */ - if (vq->call_ctx) + if (vq->call_ctx && vhost_notify(dev, vq)) eventfd_signal(vq->call_ctx, 1); } @@ -1376,7 +1421,7 @@ void vhost_add_used_and_signal_n(struct vhost_dev *dev, } /* OK, now we need to know about added descriptors. */ -bool vhost_enable_notify(struct vhost_virtqueue *vq) +bool vhost_enable_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { u16 avail_idx; int r; @@ -1384,11 +1429,34 @@ bool vhost_enable_notify(struct vhost_virtqueue *vq) if (!(vq->used_flags & VRING_USED_F_NO_NOTIFY)) return false; vq->used_flags &= ~VRING_USED_F_NO_NOTIFY; - r = put_user(vq->used_flags, &vq->used->flags); - if (r) { - vq_err(vq, "Failed to enable notification at %p: %d\n", - &vq->used->flags, r); - return false; + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + r = put_user(vq->used_flags, &vq->used->flags); + if (r) { + vq_err(vq, "Failed to enable notification at %p: %d\n", + &vq->used->flags, r); + return false; + } + } else { + r = put_user(vq->avail_idx, vhost_avail_event(vq)); + if (r) { + vq_err(vq, "Failed to update avail event index at %p: %d\n", + vhost_avail_event(vq), r); + return false; + } + } + if (unlikely(vq->log_used)) { + void __user *used; + /* Make sure data is seen before log. */ + smp_wmb(); + used = vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX) ? + &vq->used->flags : vhost_avail_event(vq); + /* Log used flags or event index entry write. Both are 16 bit + * fields. */ + log_write(vq->log_base, vq->log_addr + + (used - (void __user *)vq->used), + sizeof(u16)); + if (vq->log_ctx) + eventfd_signal(vq->log_ctx, 1); } /* They could have slipped one in as we were doing that: make * sure it's written, then check again. */ @@ -1404,15 +1472,17 @@ bool vhost_enable_notify(struct vhost_virtqueue *vq) } /* We don't need to be notified again. */ -void vhost_disable_notify(struct vhost_virtqueue *vq) +void vhost_disable_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { int r; if (vq->used_flags & VRING_USED_F_NO_NOTIFY) return; vq->used_flags |= VRING_USED_F_NO_NOTIFY; - r = put_user(vq->used_flags, &vq->used->flags); - if (r) - vq_err(vq, "Failed to enable notification at %p: %d\n", - &vq->used->flags, r); + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + r = put_user(vq->used_flags, &vq->used->flags); + if (r) + vq_err(vq, "Failed to enable notification at %p: %d\n", + &vq->used->flags, r); + } } diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index b3363ae38518..8e03379dd30f 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -84,6 +84,12 @@ struct vhost_virtqueue { /* Used flags */ u16 used_flags; + /* Last used index value we have signalled on */ + u16 signalled_used; + + /* Last used index value we have signalled on */ + bool signalled_used_valid; + /* Log writes to used structure. */ bool log_used; u64 log_addr; @@ -149,8 +155,8 @@ void vhost_add_used_and_signal(struct vhost_dev *, struct vhost_virtqueue *, void vhost_add_used_and_signal_n(struct vhost_dev *, struct vhost_virtqueue *, struct vring_used_elem *heads, unsigned count); void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *); -void vhost_disable_notify(struct vhost_virtqueue *); -bool vhost_enable_notify(struct vhost_virtqueue *); +void vhost_disable_notify(struct vhost_dev *, struct vhost_virtqueue *); +bool vhost_enable_notify(struct vhost_dev *, struct vhost_virtqueue *); int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, unsigned int log_num, u64 len); @@ -162,11 +168,12 @@ int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, } while (0) enum { - VHOST_FEATURES = (1 << VIRTIO_F_NOTIFY_ON_EMPTY) | - (1 << VIRTIO_RING_F_INDIRECT_DESC) | - (1 << VHOST_F_LOG_ALL) | - (1 << VHOST_NET_F_VIRTIO_NET_HDR) | - (1 << VIRTIO_NET_F_MRG_RXBUF), + VHOST_FEATURES = (1ULL << VIRTIO_F_NOTIFY_ON_EMPTY) | + (1ULL << VIRTIO_RING_F_INDIRECT_DESC) | + (1ULL << VIRTIO_RING_F_EVENT_IDX) | + (1ULL << VHOST_F_LOG_ALL) | + (1ULL << VHOST_NET_F_VIRTIO_NET_HDR) | + (1ULL << VIRTIO_NET_F_MRG_RXBUF), }; static inline int vhost_has_feature(struct vhost_dev *dev, int bit) diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 5fc983c5b92c..cf03ad067147 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -447,6 +447,8 @@ static int clcdfb_register(struct clcd_fb *fb) goto out; } + fb->fb.device = &fb->dev->dev; + fb->fb.fix.mmio_start = fb->dev->res.start; fb->fb.fix.mmio_len = resource_size(&fb->dev->res); diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c index 3ec4923c2d84..c22e8d39a2cb 100644 --- a/drivers/video/arcfb.c +++ b/drivers/video/arcfb.c @@ -515,11 +515,10 @@ static int __devinit arcfb_probe(struct platform_device *dev) /* We need a flat backing store for the Arc's less-flat actual paged framebuffer */ - if (!(videomemory = vmalloc(videomemorysize))) + videomemory = vzalloc(videomemorysize); + if (!videomemory) return retval; - memset(videomemory, 0, videomemorysize); - info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev); if (!info) goto err; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index ebb893c49e90..d7aaec5667bf 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -248,10 +248,6 @@ static int atyfb_sync(struct fb_info *info); static int aty_init(struct fb_info *info); -#ifdef CONFIG_ATARI -static int store_video_par(char *videopar, unsigned char m64_num); -#endif - static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc); static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc); @@ -2268,11 +2264,13 @@ error: return; } +#ifdef CONFIG_PCI static void aty_bl_exit(struct backlight_device *bd) { backlight_device_unregister(bd); printk("aty: Backlight unloaded\n"); } +#endif /* CONFIG_PCI */ #endif /* CONFIG_FB_ATY_BACKLIGHT */ @@ -2789,7 +2787,7 @@ aty_init_exit: return ret; } -#ifdef CONFIG_ATARI +#if defined(CONFIG_ATARI) && !defined(MODULE) static int __devinit store_video_par(char *video_str, unsigned char m64_num) { char *p; @@ -2818,7 +2816,7 @@ static int __devinit store_video_par(char *video_str, unsigned char m64_num) phys_vmembase[m64_num] = 0; return -1; } -#endif /* CONFIG_ATARI */ +#endif /* CONFIG_ATARI && !MODULE */ /* * Blank the display. diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 0c9373bedd1f..2d93c8d61ad5 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -302,6 +302,18 @@ config BACKLIGHT_ADP8860 To compile this driver as a module, choose M here: the module will be called adp8860_bl. +config BACKLIGHT_ADP8870 + tristate "Backlight Driver for ADP8870 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8870, + say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8870_bl. + config BACKLIGHT_88PM860X tristate "Backlight Driver for 88PM8606 using WLED" depends on MFD_88PM860X diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index b9ca8490df87..ee72adb8786e 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o +obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c new file mode 100644 index 000000000000..05a8832bb3eb --- /dev/null +++ b/drivers/video/backlight/adp8870_bl.c @@ -0,0 +1,1012 @@ +/* + * Backlight driver for Analog Devices ADP8870 Backlight Devices + * + * Copyright 2009-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#include <linux/i2c/adp8870.h> +#define ADP8870_EXT_FEATURES +#define ADP8870_USE_LEDS + + +#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */ +#define ADP8870_MDCR 0x01 /* Device mode and status */ +#define ADP8870_INT_STAT 0x02 /* Interrupts status */ +#define ADP8870_INT_EN 0x03 /* Interrupts enable */ +#define ADP8870_CFGR 0x04 /* Configuration register */ +#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */ +#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */ +#define ADP8870_BLOFF 0x07 /* Backlight off timeout */ +#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */ +#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */ +#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */ +#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */ +#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */ +#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */ +#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */ +#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */ +#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */ +#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */ +#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */ +#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */ +#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */ +#define ADP8870_ISCC 0x1B /* Independent sink current control register */ +#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */ +#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */ +#define ADP8870_ISCF 0x1E /* Independent sink current fade register */ +#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */ +#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */ +#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */ +#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */ +#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */ +#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */ +#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */ +#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */ +#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */ +#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */ +#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */ +#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */ +#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */ +#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */ +#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */ +#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */ +#define ADP8870_L2TRP 0x32 /* L2 comparator reference */ +#define ADP8870_L2HYS 0x33 /* L2 hysteresis */ +#define ADP8870_L3TRP 0x34 /* L3 comparator reference */ +#define ADP8870_L3HYS 0x35 /* L3 hysteresis */ +#define ADP8870_L4TRP 0x36 /* L4 comparator reference */ +#define ADP8870_L4HYS 0x37 /* L4 hysteresis */ +#define ADP8870_L5TRP 0x38 /* L5 comparator reference */ +#define ADP8870_L5HYS 0x39 /* L5 hysteresis */ +#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */ +#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */ +#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */ +#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */ + +#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */ +#define ADP8870_DEVID(x) ((x) & 0xF) +#define ADP8870_MANID(x) ((x) >> 4) + +/* MDCR Device mode and status */ +#define D7ALSEN (1 << 7) +#define INT_CFG (1 << 6) +#define NSTBY (1 << 5) +#define DIM_EN (1 << 4) +#define GDWN_DIS (1 << 3) +#define SIS_EN (1 << 2) +#define CMP_AUTOEN (1 << 1) +#define BLEN (1 << 0) + +/* ADP8870_ALS1_EN Main ALS comparator level enable */ +#define L5_EN (1 << 3) +#define L4_EN (1 << 2) +#define L3_EN (1 << 1) +#define L2_EN (1 << 0) + +#define CFGR_BLV_SHIFT 3 +#define CFGR_BLV_MASK 0x7 +#define ADP8870_FLAG_LED_MASK 0xFF + +#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) +#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) +#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1) + +struct adp8870_bl { + struct i2c_client *client; + struct backlight_device *bl; + struct adp8870_led *led; + struct adp8870_backlight_platform_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int revid; + int current_brightness; +}; + +struct adp8870_led { + struct led_classdev cdev; + struct work_struct work; + struct i2c_client *client; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = ret; + return 0; +} + + +static int adp8870_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret) + dev_err(&client->dev, "failed to write\n"); + + return ret; +} + +static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && ((reg_val & bit_mask) == 0)) { + reg_val |= bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && (reg_val & bit_mask)) { + reg_val &= ~bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +/* + * Independent sink / LED + */ +#if defined(ADP8870_USE_LEDS) +static void adp8870_led_work(struct work_struct *work) +{ + struct adp8870_led *led = container_of(work, struct adp8870_led, work); + adp8870_write(led->client, ADP8870_ISC1 + led->id - 1, + led->new_brightness >> 1); +} + +static void adp8870_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp8870_led *led; + + led = container_of(led_cdev, struct adp8870_led, cdev); + led->new_brightness = value; + /* + * Use workqueue for IO since I2C operations can sleep. + */ + schedule_work(&led->work); +} + +static int adp8870_led_setup(struct adp8870_led *led) +{ + struct i2c_client *client = led->client; + int ret = 0; + + ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1)); + if (ret) + return ret; + + if (led->id > 4) + ret = adp8870_set_bits(client, ADP8870_ISCT1, + (led->flags & 0x3) << ((led->id - 5) * 2)); + else + ret = adp8870_set_bits(client, ADP8870_ISCT2, + (led->flags & 0x3) << ((led->id - 1) * 2)); + + return ret; +} + +static int __devinit adp8870_led_probe(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + struct adp8870_bl *data = i2c_get_clientdata(client); + struct adp8870_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + + led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL); + if (led == NULL) { + dev_err(&client->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law); + if (ret) + goto err_free; + + ret = adp8870_write(client, ADP8870_ISCT1, + (pdata->led_on_time & 0x3) << 6); + if (ret) + goto err_free; + + ret = adp8870_write(client, ADP8870_ISCF, + FADE_VAL(pdata->led_fade_in, pdata->led_fade_out)); + if (ret) + goto err_free; + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK; + + if (led_dat->id > 7 || led_dat->id < 1) { + dev_err(&client->dev, "Invalid LED ID %d\n", + led_dat->id); + goto err; + } + + if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) { + dev_err(&client->dev, "LED %d used by Backlight\n", + led_dat->id); + goto err; + } + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp8870_led_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT; + led_dat->client = client; + led_dat->new_brightness = LED_OFF; + INIT_WORK(&led_dat->work, adp8870_led_work); + + ret = led_classdev_register(&client->dev, &led_dat->cdev); + if (ret) { + dev_err(&client->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp8870_led_setup(led_dat); + if (ret) { + dev_err(&client->dev, "failed to write\n"); + i++; + goto err; + } + } + + data->led = led; + + return 0; + + err: + for (i = i - 1; i >= 0; --i) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + err_free: + kfree(led); + + return ret; +} + +static int __devexit adp8870_led_remove(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + struct adp8870_bl *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&data->led[i].cdev); + cancel_work_sync(&data->led[i].work); + } + + kfree(data->led); + return 0; +} +#else +static int __devinit adp8870_led_probe(struct i2c_client *client) +{ + return 0; +} + +static int __devexit adp8870_led_remove(struct i2c_client *client) +{ + return 0; +} +#endif + +static int adp8870_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret = adp8870_clr_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l1 sysfs brightness + */ + ret = adp8870_write(client, ADP8870_BLMX1, + data->cached_daylight_max); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + } + } else { + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } + + if (data->current_brightness && brightness == 0) + ret = adp8870_set_bits(client, + ADP8870_MDCR, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret = adp8870_clr_bits(client, + ADP8870_MDCR, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp8870_bl_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return adp8870_bl_set(bl, brightness); +} + +static int adp8870_bl_get_brightness(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops adp8870_bl_ops = { + .update_status = adp8870_bl_update_status, + .get_brightness = adp8870_bl_get_brightness, +}; + +static int adp8870_bl_setup(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + struct adp8870_backlight_platform_data *pdata = data->pdata; + int ret = 0; + + ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim); + if (ret) + return ret; + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret = adp8870_write(client, ADP8870_BLMX2, + pdata->l2_bright_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM2, + pdata->l2_bright_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX3, + pdata->l3_office_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM3, + pdata->l3_office_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX4, + pdata->l4_indoor_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM4, + pdata->l4_indor_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX5, + pdata->l5_dark_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM5, + pdata->l5_dark_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN | + L3_EN | L2_EN); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_CMP_CTL, + ALS_CMPR_CFG_VAL(pdata->abml_filt)); + if (ret) + return ret; + } + + ret = adp8870_write(client, ADP8870_CFGR, + BL_CFGR_VAL(pdata->bl_fade_law, 0)); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in, + pdata->bl_fade_out)); + if (ret) + return ret; + /* + * ADP8870 Rev0 requires GDWN_DIS bit set + */ + + ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY | + (data->revid == 0 ? GDWN_DIS : 0)); + + return ret; +} + +static ssize_t adp8870_show(struct device *dev, char *buf, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, reg, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp8870_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp8870_write(data->client, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX5); +} + +static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX5); +} +static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show, + adp8870_bl_l5_dark_max_store); + + +static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX4); +} + +static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX4); +} +static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show, + adp8870_bl_l4_indoor_max_store); + + +static ssize_t adp8870_bl_l3_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX3); +} + +static ssize_t adp8870_bl_l3_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX3); +} + +static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show, + adp8870_bl_l3_office_max_store); + +static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX2); +} + +static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX2); +} +static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show, + adp8870_bl_l2_bright_max_store); + +static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX1); +} + +static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int ret = strict_strtoul(buf, 10, &data->cached_daylight_max); + if (ret) + return ret; + + return adp8870_store(dev, buf, count, ADP8870_BLMX1); +} +static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show, + adp8870_bl_l1_daylight_max_store); + +static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM5); +} + +static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM5); +} +static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show, + adp8870_bl_l5_dark_dim_store); + +static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM4); +} + +static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM4); +} +static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show, + adp8870_bl_l4_indoor_dim_store); + + +static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM3); +} + +static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM3); +} +static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show, + adp8870_bl_l3_office_dim_store); + +static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM2); +} + +static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM2); +} +static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show, + adp8870_bl_l2_bright_dim_store); + +static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM1); +} + +static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM1); +} +static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show, + adp8870_bl_l1_daylight_dim_store); + +#ifdef ADP8870_EXT_FEATURES +static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + uint16_t ret_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val); + if (error < 0) { + mutex_unlock(&data->lock); + return error; + } + ret_val = reg_val; + error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + /* Return 13-bit conversion value for the first light sensor */ + ret_val += (reg_val & 0x1F) << 8; + + return sprintf(buf, "%u\n", ret_val); +} +static DEVICE_ATTR(ambient_light_level, 0444, + adp8870_bl_ambient_light_level_show, NULL); + +static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_CFGR, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", + ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1); +} + +static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + uint8_t reg_val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + if (val == 0) { + /* Enable automatic ambient light sensing */ + adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + } else if ((val > 0) && (val < 6)) { + /* Disable automatic ambient light sensing */ + adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + + /* Set user supplied ambient light zone */ + mutex_lock(&data->lock); + adp8870_read(data->client, ADP8870_CFGR, ®_val); + reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT); + reg_val |= (val - 1) << CFGR_BLV_SHIFT; + adp8870_write(data->client, ADP8870_CFGR, reg_val); + mutex_unlock(&data->lock); + } + + return count; +} +static DEVICE_ATTR(ambient_light_zone, 0664, + adp8870_bl_ambient_light_zone_show, + adp8870_bl_ambient_light_zone_store); +#endif + +static struct attribute *adp8870_bl_attributes[] = { + &dev_attr_l5_dark_max.attr, + &dev_attr_l5_dark_dim.attr, + &dev_attr_l4_indoor_max.attr, + &dev_attr_l4_indoor_dim.attr, + &dev_attr_l3_office_max.attr, + &dev_attr_l3_office_dim.attr, + &dev_attr_l2_bright_max.attr, + &dev_attr_l2_bright_dim.attr, + &dev_attr_l1_daylight_max.attr, + &dev_attr_l1_daylight_dim.attr, +#ifdef ADP8870_EXT_FEATURES + &dev_attr_ambient_light_level.attr, + &dev_attr_ambient_light_zone.attr, +#endif + NULL +}; + +static const struct attribute_group adp8870_bl_attr_group = { + .attrs = adp8870_bl_attributes, +}; + +static int __devinit adp8870_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct adp8870_bl *data; + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + uint8_t reg_val; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + ret = adp8870_read(client, ADP8870_MFDVID, ®_val); + if (ret < 0) + return -EIO; + + if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) { + dev_err(&client->dev, "failed to probe\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->revid = ADP8870_DEVID(reg_val); + data->client = client; + data->pdata = pdata; + data->id = id->driver_data; + data->current_brightness = 0; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS; + bl = backlight_device_register(dev_driver_string(&client->dev), + &client->dev, data, &adp8870_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&client->dev, "failed to register backlight\n"); + ret = PTR_ERR(bl); + goto out2; + } + + data->bl = bl; + + if (pdata->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp8870_bl_attr_group); + + if (ret) { + dev_err(&client->dev, "failed to register sysfs\n"); + goto out1; + } + + ret = adp8870_bl_setup(bl); + if (ret) { + ret = -EIO; + goto out; + } + + backlight_update_status(bl); + + dev_info(&client->dev, "Rev.%d Backlight\n", data->revid); + + if (pdata->num_leds) + adp8870_led_probe(client); + + return 0; + +out: + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); +out1: + backlight_device_unregister(bl); +out2: + i2c_set_clientdata(client, NULL); + kfree(data); + + return ret; +} + +static int __devexit adp8870_remove(struct i2c_client *client) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + if (data->led) + adp8870_led_remove(client); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); + + backlight_device_unregister(data->bl); + i2c_set_clientdata(client, NULL); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message) +{ + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + return 0; +} + +static int adp8870_i2c_resume(struct i2c_client *client) +{ + adp8870_set_bits(client, ADP8870_MDCR, NSTBY); + + return 0; +} +#else +#define adp8870_i2c_suspend NULL +#define adp8870_i2c_resume NULL +#endif + +static const struct i2c_device_id adp8870_id[] = { + { "adp8870", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp8870_id); + +static struct i2c_driver adp8870_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = adp8870_probe, + .remove = __devexit_p(adp8870_remove), + .suspend = adp8870_i2c_suspend, + .resume = adp8870_i2c_resume, + .id_table = adp8870_id, +}; + +static int __init adp8870_init(void) +{ + return i2c_add_driver(&adp8870_driver); +} +module_init(adp8870_init); + +static void __exit adp8870_exit(void) +{ + i2c_del_driver(&adp8870_driver); +} +module_exit(adp8870_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP8870 Backlight driver"); +MODULE_ALIAS("platform:adp8870-backlight"); diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c index 47c21fb2c82f..bea53c1a4950 100644 --- a/drivers/video/bf537-lq035.c +++ b/drivers/video/bf537-lq035.c @@ -789,6 +789,7 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) i2c_add_driver(&ad5280_driver); memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; props.max_brightness = MAX_BRIGHENESS; bl_dev = backlight_device_register("bf537-bl", NULL, NULL, &bfin_lq035fb_bl_ops, &props); diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c index ebda6876d3a9..377dde3d5bfc 100644 --- a/drivers/video/broadsheetfb.c +++ b/drivers/video/broadsheetfb.c @@ -1101,12 +1101,10 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev) videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE); - videomemory = vmalloc(videomemorysize); + videomemory = vzalloc(videomemorysize); if (!videomemory) goto err_fb_rel; - memset(videomemory, 0, videomemorysize); - info->screen_base = (char *)videomemory; info->fbops = &broadsheetfb_ops; diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index fb205843c2c7..784139aed079 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -16,6 +16,8 @@ #include <linux/pci.h> #include <video/vga.h> +static bool request_mem_succeeded = false; + static struct fb_var_screeninfo efifb_defined __devinitdata = { .activate = FB_ACTIVATE_NOW, .height = -1, @@ -281,7 +283,9 @@ static void efifb_destroy(struct fb_info *info) { if (info->screen_base) iounmap(info->screen_base); - release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size); + if (request_mem_succeeded) + release_mem_region(info->apertures->ranges[0].base, + info->apertures->ranges[0].size); framebuffer_release(info); } @@ -326,14 +330,13 @@ static int __init efifb_setup(char *options) return 0; } -static int __devinit efifb_probe(struct platform_device *dev) +static int __init efifb_probe(struct platform_device *dev) { struct fb_info *info; int err; unsigned int size_vmode; unsigned int size_remap; unsigned int size_total; - int request_succeeded = 0; if (!screen_info.lfb_depth) screen_info.lfb_depth = 32; @@ -387,7 +390,7 @@ static int __devinit efifb_probe(struct platform_device *dev) efifb_fix.smem_len = size_remap; if (request_mem_region(efifb_fix.smem_start, size_remap, "efifb")) { - request_succeeded = 1; + request_mem_succeeded = true; } else { /* We cannot make this fatal. Sometimes this comes from magic spaces our resource handlers simply don't know about */ @@ -413,7 +416,7 @@ static int __devinit efifb_probe(struct platform_device *dev) info->apertures->ranges[0].base = efifb_fix.smem_start; info->apertures->ranges[0].size = size_remap; - info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len); + info->screen_base = ioremap_wc(efifb_fix.smem_start, efifb_fix.smem_len); if (!info->screen_base) { printk(KERN_ERR "efifb: abort, cannot ioremap video memory " "0x%x @ 0x%lx\n", @@ -491,13 +494,12 @@ err_unmap: err_release_fb: framebuffer_release(info); err_release_mem: - if (request_succeeded) + if (request_mem_succeeded) release_mem_region(efifb_fix.smem_start, size_total); return err; } static struct platform_driver efifb_driver = { - .probe = efifb_probe, .driver = { .name = "efifb", }, @@ -528,13 +530,21 @@ static int __init efifb_init(void) if (!screen_info.lfb_linelength) return -ENODEV; - ret = platform_driver_register(&efifb_driver); + ret = platform_device_register(&efifb_device); + if (ret) + return ret; - if (!ret) { - ret = platform_device_register(&efifb_device); - if (ret) - platform_driver_unregister(&efifb_driver); + /* + * This is not just an optimization. We will interfere + * with a real driver if we get reprobed, so don't allow + * it. + */ + ret = platform_driver_probe(&efifb_driver, efifb_probe); + if (ret) { + platform_device_unregister(&efifb_device); + return ret; } + return ret; } module_init(efifb_init); diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index bedf5be27f05..0acc7d65aeaa 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -555,8 +555,6 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var, static int fsl_diu_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - unsigned long htotal, vtotal; - pr_debug("check_var xres: %d\n", var->xres); pr_debug("check_var yres: %d\n", var->yres); @@ -635,20 +633,6 @@ static int fsl_diu_check_var(struct fb_var_screeninfo *var, break; } - /* If the pixclock is below the minimum spec'd value then set to - * refresh rate for 60Hz since this is supported by most monitors. - * Refer to Documentation/fb/ for calculations. - */ - if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) { - htotal = var->xres + var->right_margin + var->hsync_len + - var->left_margin; - vtotal = var->yres + var->lower_margin + var->vsync_len + - var->upper_margin; - var->pixclock = (vtotal * htotal * 6UL) / 100UL; - var->pixclock = KHZ2PICOS(var->pixclock); - pr_debug("pixclock set for 60Hz refresh = %u ps\n", - var->pixclock); - } var->height = -1; var->width = -1; diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index c6b554f72c6d..5a5d0928df33 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -29,7 +29,7 @@ static int crt_option = 1; static char panel_option[32] = ""; /* Modes relevant to the GX1 (taken from modedb.c) */ -static const struct fb_videomode __initdata gx1_modedb[] = { +static const struct fb_videomode __devinitdata gx1_modedb[] = { /* 640x480-60 VESA */ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, @@ -195,7 +195,7 @@ static int gx1fb_blank(int blank_mode, struct fb_info *info) return par->vid_ops->blank_display(info, blank_mode); } -static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) +static int __devinit gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) { struct geodefb_par *par = info->par; unsigned gx_base; @@ -268,7 +268,7 @@ static struct fb_ops gx1fb_ops = { .fb_imageblit = cfb_imageblit, }; -static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) +static struct fb_info * __devinit gx1fb_init_fbinfo(struct device *dev) { struct geodefb_par *par; struct fb_info *info; @@ -318,7 +318,7 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) return info; } -static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int __devinit gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct geodefb_par *par; struct fb_info *info; @@ -382,7 +382,7 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * return ret; } -static void gx1fb_remove(struct pci_dev *pdev) +static void __devexit gx1fb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct geodefb_par *par = info->par; @@ -441,7 +441,7 @@ static struct pci_driver gx1fb_driver = { .name = "gx1fb", .id_table = gx1fb_id_table, .probe = gx1fb_probe, - .remove = gx1fb_remove, + .remove = __devexit_p(gx1fb_remove), }; static int __init gx1fb_init(void) @@ -456,7 +456,7 @@ static int __init gx1fb_init(void) return pci_register_driver(&gx1fb_driver); } -static void __exit gx1fb_cleanup(void) +static void __devexit gx1fb_cleanup(void) { pci_unregister_driver(&gx1fb_driver); } diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c index 1b94643ecbcf..614251a9af91 100644 --- a/drivers/video/hecubafb.c +++ b/drivers/video/hecubafb.c @@ -231,10 +231,9 @@ static int __devinit hecubafb_probe(struct platform_device *dev) videomemorysize = (DPY_W*DPY_H)/8; - if (!(videomemory = vmalloc(videomemorysize))) - return retval; - - memset(videomemory, 0, videomemorysize); + videomemory = vzalloc(videomemorysize); + if (!videomemory) + goto err_videomem_alloc; info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev); if (!info) @@ -276,6 +275,7 @@ err_fbreg: framebuffer_release(info); err_fballoc: vfree(videomemory); +err_videomem_alloc: module_put(board->owner); return retval; } diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index d2ccfd6e662c..f135dbead07d 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -856,10 +856,10 @@ failed_platform_init: dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, fbi->map_dma); failed_map: - clk_put(fbi->clk); -failed_getclock: iounmap(fbi->regs); failed_ioremap: + clk_put(fbi->clk); +failed_getclock: release_mem_region(res->start, resource_size(res)); failed_req: kfree(info->pseudo_palette); diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c index ed64edfd2c43..97d45e5115e2 100644 --- a/drivers/video/metronomefb.c +++ b/drivers/video/metronomefb.c @@ -628,12 +628,10 @@ static int __devinit metronomefb_probe(struct platform_device *dev) /* we need to add a spare page because our csum caching scheme walks * to the end of the page */ videomemorysize = PAGE_SIZE + (fw * fh); - videomemory = vmalloc(videomemorysize); + videomemory = vzalloc(videomemorysize); if (!videomemory) goto err_fb_rel; - memset(videomemory, 0, videomemorysize); - info->screen_base = (char __force __iomem *)videomemory; info->fbops = &metronomefb_ops; diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 48c3ea8652b6..cb175fe7abc0 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -1128,3 +1128,4 @@ EXPORT_SYMBOL(fb_find_best_mode); EXPORT_SYMBOL(fb_find_nearest_mode); EXPORT_SYMBOL(fb_videomode_to_modelist); EXPORT_SYMBOL(fb_find_mode); +EXPORT_SYMBOL(fb_find_mode_cvt); diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c index 35f61dd0cb3a..bb95ec56d25d 100644 --- a/drivers/video/pxa168fb.c +++ b/drivers/video/pxa168fb.c @@ -623,19 +623,21 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no IO memory defined\n"); - return -ENOENT; + ret = -ENOENT; + goto failed_put_clk; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "no IRQ defined\n"); - return -ENOENT; + ret = -ENOENT; + goto failed_put_clk; } info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev); if (info == NULL) { - clk_put(clk); - return -ENOMEM; + ret = -ENOMEM; + goto failed_put_clk; } /* Initialize private data */ @@ -671,7 +673,7 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev) fbi->reg_base = ioremap_nocache(res->start, resource_size(res)); if (fbi->reg_base == NULL) { ret = -ENOMEM; - goto failed; + goto failed_free_info; } /* @@ -683,7 +685,7 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev) &fbi->fb_start_dma, GFP_KERNEL); if (info->screen_base == NULL) { ret = -ENOMEM; - goto failed; + goto failed_free_info; } info->fix.smem_start = (unsigned long)fbi->fb_start_dma; @@ -772,8 +774,9 @@ failed_free_clk: failed_free_fbmem: dma_free_coherent(fbi->dev, info->fix.smem_len, info->screen_base, fbi->fb_start_dma); -failed: +failed_free_info: kfree(info); +failed_put_clk: clk_put(clk); dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret); diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 0352afa49a39..4aecf213c9be 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -235,13 +235,12 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct s3c_fb_win *win = info->par; - struct s3c_fb_pd_win *windata = win->windata; struct s3c_fb *sfb = win->parent; dev_dbg(sfb->dev, "checking parameters\n"); - var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres); - var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres); + var->xres_virtual = max(var->xres_virtual, var->xres); + var->yres_virtual = max(var->yres_virtual, var->yres); if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) { dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n", @@ -558,6 +557,13 @@ static int s3c_fb_set_par(struct fb_info *info) vidosd_set_alpha(win, alpha); vidosd_set_size(win, data); + /* Enable DMA channel for this window */ + if (sfb->variant.has_shadowcon) { + data = readl(sfb->regs + SHADOWCON); + data |= SHADOWCON_CHx_ENABLE(win_no); + writel(data, sfb->regs + SHADOWCON); + } + data = WINCONx_ENWIN; /* note, since we have to round up the bits-per-pixel, we end up @@ -637,13 +643,6 @@ static int s3c_fb_set_par(struct fb_info *info) writel(data, regs + sfb->variant.wincon + (win_no * 4)); writel(0x0, regs + sfb->variant.winmap + (win_no * 4)); - /* Enable DMA channel for this window */ - if (sfb->variant.has_shadowcon) { - data = readl(sfb->regs + SHADOWCON); - data |= SHADOWCON_CHx_ENABLE(win_no); - writel(data, sfb->regs + SHADOWCON); - } - shadow_protect_win(win, 0); return 0; @@ -1487,11 +1486,10 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res)); - kfree(sfb); - pm_runtime_put_sync(sfb->dev); pm_runtime_disable(sfb->dev); + kfree(sfb); return 0; } diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 3b7f2f5bae71..4de541ca9c52 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -2237,6 +2237,22 @@ static int __devinit savagefb_probe(struct pci_dev* dev, &info->modelist); #endif info->var = savagefb_var800x600x8; + /* if a panel was detected, default to a CVT mode instead */ + if (par->SavagePanelWidth) { + struct fb_videomode cvt_mode; + + memset(&cvt_mode, 0, sizeof(cvt_mode)); + cvt_mode.xres = par->SavagePanelWidth; + cvt_mode.yres = par->SavagePanelHeight; + cvt_mode.refresh = 60; + /* FIXME: if we know there is only the panel + * we can enable reduced blanking as well */ + if (fb_find_mode_cvt(&cvt_mode, 0, 0)) + printk(KERN_WARNING "No CVT mode found for panel\n"); + else if (fb_find_mode(&info->var, info, NULL, NULL, 0, + &cvt_mode, 0) != 3) + info->var = savagefb_var800x600x8; + } if (mode_option) { fb_find_mode(&info->var, info, mode_option, diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c index 6ae40b630dc9..7d54e2c612f7 100644 --- a/drivers/video/sh_mobile_hdmi.c +++ b/drivers/video/sh_mobile_hdmi.c @@ -1127,23 +1127,16 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work) struct fb_info *info = hdmi->info; unsigned long parent_rate = 0, hdmi_rate; - /* A device has been plugged in */ - pm_runtime_get_sync(hdmi->dev); - ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate); - if (ret < 0) { - pm_runtime_put(hdmi->dev); + if (ret < 0) goto out; - } hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE; /* Reconfigure the clock */ ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate); - if (ret < 0) { - pm_runtime_put(hdmi->dev); + if (ret < 0) goto out; - } msleep(10); sh_hdmi_configure(hdmi); @@ -1191,7 +1184,6 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work) fb_set_suspend(hdmi->info, 1); console_unlock(); - pm_runtime_put(hdmi->dev); } out: @@ -1312,7 +1304,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn); pm_runtime_enable(&pdev->dev); - pm_runtime_resume(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); /* Product and revision IDs are 0 in sh-mobile version */ dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n", @@ -1340,7 +1332,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev) ecodec: free_irq(irq, hdmi); ereqirq: - pm_runtime_suspend(&pdev->dev); + pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); iounmap(hdmi->base); emap: @@ -1377,7 +1369,7 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev) free_irq(irq, hdmi); /* Wait for already scheduled work */ cancel_delayed_work_sync(&hdmi->edid_work); - pm_runtime_suspend(&pdev->dev); + pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); clk_disable(hdmi->hdmi_clk); clk_put(hdmi->hdmi_clk); diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 404c03b4b7c7..019dbd3f12b2 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -470,7 +470,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) unsigned long tmp; int bpp = 0; unsigned long ldddsr; - int k, m; + int k, m, ret; /* enable clocks before accessing the hardware */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { @@ -540,7 +540,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) board_cfg = &ch->cfg.board_cfg; if (board_cfg->setup_sys) { - int ret = board_cfg->setup_sys(board_cfg->board_data, + ret = board_cfg->setup_sys(board_cfg->board_data, ch, &sh_mobile_lcdc_sys_bus_ops); if (ret) return ret; diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index 9170c82b495c..cc7d7329dc15 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -218,7 +218,7 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata, icb_offset = 0xc0000000 | (cfg->current_reg << 23); *icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24); - if ((*icb_addr_c) && is_nvcolor(cfg->pixelformat)) + if (is_nvcolor(cfg->pixelformat)) *icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24); } diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 87f0be1e78b5..6294dca95500 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -1664,7 +1664,7 @@ static void sm501fb_stop(struct sm501fb_info *info) resource_size(info->regs_res)); } -static int sm501fb_init_fb(struct fb_info *fb, +static int __devinit sm501fb_init_fb(struct fb_info *fb, enum sm501_controller head, const char *fbname) { diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c index 52b0f3e8ccac..816a4fda04f5 100644 --- a/drivers/video/udlfb.c +++ b/drivers/video/udlfb.c @@ -1233,8 +1233,12 @@ static int dlfb_setup_modes(struct dlfb_data *dev, if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info)) fb_add_videomode(&info->monspecs.modedb[i], &info->modelist); - else /* if we've removed top/best mode */ - info->monspecs.misc &= ~FB_MISC_1ST_DETAIL; + else { + if (i == 0) + /* if we've removed top/best mode */ + info->monspecs.misc + &= ~FB_MISC_1ST_DETAIL; + } } default_vmode = fb_find_best_display(&info->monspecs, diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index a99bbe86db13..501b3406c6d5 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -175,6 +175,7 @@ static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green, static void vesafb_destroy(struct fb_info *info) { + fb_dealloc_cmap(&info->cmap); if (info->screen_base) iounmap(info->screen_base); release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size); diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c index 53b2c5aae067..305c975b1787 100644 --- a/drivers/video/vga16fb.c +++ b/drivers/video/vga16fb.c @@ -1265,9 +1265,11 @@ static void vga16fb_imageblit(struct fb_info *info, const struct fb_image *image static void vga16fb_destroy(struct fb_info *info) { + struct platform_device *dev = container_of(info->device, struct platform_device, dev); iounmap(info->screen_base); fb_dealloc_cmap(&info->cmap); /* XXX unshare VGA regions */ + platform_set_drvdata(dev, NULL); framebuffer_release(info); } diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index a20218c2fda8..beac52fc1c0e 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -395,10 +395,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, spin_lock_init(&info->dirty_lock); spin_lock_init(&info->resize_lock); - info->fb = vmalloc(fb_size); + info->fb = vzalloc(fb_size); if (info->fb == NULL) goto error_nomem; - memset(info->fb, 0, fb_size); info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT; diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 0f1da45ba47d..e058ace2a4ad 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -40,9 +40,6 @@ struct virtio_balloon /* Waiting for host to ack the pages we released. */ struct completion acked; - /* Do we have to tell Host *before* we reuse pages? */ - bool tell_host_first; - /* The pages we've told the Host we're not using. */ unsigned int num_pages; struct list_head pages; @@ -151,13 +148,14 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num) vb->num_pages--; } - if (vb->tell_host_first) { - tell_host(vb, vb->deflate_vq); - release_pages_by_pfn(vb->pfns, vb->num_pfns); - } else { - release_pages_by_pfn(vb->pfns, vb->num_pfns); - tell_host(vb, vb->deflate_vq); - } + + /* + * Note that if + * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST); + * is true, we *have* to do it in this order + */ + tell_host(vb, vb->deflate_vq); + release_pages_by_pfn(vb->pfns, vb->num_pfns); } static inline void update_stat(struct virtio_balloon *vb, int idx, @@ -325,9 +323,6 @@ static int virtballoon_probe(struct virtio_device *vdev) goto out_del_vqs; } - vb->tell_host_first - = virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST); - return 0; out_del_vqs: diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index b0043fb26a4d..68b9136847af 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -82,6 +82,9 @@ struct vring_virtqueue /* Host supports indirect buffers */ bool indirect; + /* Host publishes avail event idx */ + bool event; + /* Number of free buffers */ unsigned int num_free; /* Head of free buffer list. */ @@ -237,18 +240,22 @@ EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp); void virtqueue_kick(struct virtqueue *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); + u16 new, old; START_USE(vq); /* Descriptors and available array need to be set before we expose the * new available array entries. */ virtio_wmb(); - vq->vring.avail->idx += vq->num_added; + old = vq->vring.avail->idx; + new = vq->vring.avail->idx = old + vq->num_added; vq->num_added = 0; /* Need to update avail index before checking if we should notify */ virtio_mb(); - if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) + if (vq->event ? + vring_need_event(vring_avail_event(&vq->vring), new, old) : + !(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) /* Prod other side to tell it about changes. */ vq->notify(&vq->vq); @@ -324,6 +331,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i]; detach_buf(vq, i); vq->last_used_idx++; + /* If we expect an interrupt for the next entry, tell host + * by writing event index and flush out the write before + * the read in the next get_buf call. */ + if (!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) { + vring_used_event(&vq->vring) = vq->last_used_idx; + virtio_mb(); + } + END_USE(vq); return ret; } @@ -345,7 +360,11 @@ bool virtqueue_enable_cb(struct virtqueue *_vq) /* We optimistically turn back on interrupts, then check if there was * more to do. */ + /* Depending on the VIRTIO_RING_F_EVENT_IDX feature, we need to + * either clear the flags bit or point the event index at the next + * entry. Always do both to keep code simple. */ vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; + vring_used_event(&vq->vring) = vq->last_used_idx; virtio_mb(); if (unlikely(more_used(vq))) { END_USE(vq); @@ -357,6 +376,33 @@ bool virtqueue_enable_cb(struct virtqueue *_vq) } EXPORT_SYMBOL_GPL(virtqueue_enable_cb); +bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) +{ + struct vring_virtqueue *vq = to_vvq(_vq); + u16 bufs; + + START_USE(vq); + + /* We optimistically turn back on interrupts, then check if there was + * more to do. */ + /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to + * either clear the flags bit or point the event index at the next + * entry. Always do both to keep code simple. */ + vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; + /* TODO: tune this threshold */ + bufs = (u16)(vq->vring.avail->idx - vq->last_used_idx) * 3 / 4; + vring_used_event(&vq->vring) = vq->last_used_idx + bufs; + virtio_mb(); + if (unlikely((u16)(vq->vring.used->idx - vq->last_used_idx) > bufs)) { + END_USE(vq); + return false; + } + + END_USE(vq); + return true; +} +EXPORT_SYMBOL_GPL(virtqueue_enable_cb_delayed); + void *virtqueue_detach_unused_buf(struct virtqueue *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); @@ -438,6 +484,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, #endif vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC); + vq->event = virtio_has_feature(vdev, VIRTIO_RING_F_EVENT_IDX); /* No callback? Tell other side not to bother us. */ if (!callback) @@ -472,6 +519,8 @@ void vring_transport_features(struct virtio_device *vdev) switch (i) { case VIRTIO_RING_F_INDIRECT_DESC: break; + case VIRTIO_RING_F_EVENT_IDX: + break; default: /* We don't understand this bit. */ clear_bit(i, vdev->features); diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 00d615d7aa21..979d6eed9a0f 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -42,7 +42,7 @@ config W1_MASTER_MXC config W1_MASTER_DS1WM tristate "Maxim DS1WM 1-wire busmaster" - depends on W1 + depends on W1 && GENERIC_HARDIRQS help Say Y here to enable the DS1WM 1-wire driver, such as that in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index ad57593d224a..a0c8965c1a79 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -109,6 +109,7 @@ struct ds1wm_data { /* byte to write that makes all intr disabled, */ /* considering active_state (IAS) (optimization) */ u8 int_en_reg_none; + unsigned int reset_recover_delay; /* see ds1wm.h */ }; static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg, @@ -187,6 +188,9 @@ static int ds1wm_reset(struct ds1wm_data *ds1wm_data) return 1; } + if (ds1wm_data->reset_recover_delay) + msleep(ds1wm_data->reset_recover_delay); + return 0; } @@ -490,6 +494,7 @@ static int ds1wm_probe(struct platform_device *pdev) } ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); + ds1wm_data->reset_recover_delay = plat->reset_recover_delay; if (res->flags & IORESOURCE_IRQ_HIGHEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_RISING); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 022f9eb0b7bf..9536d386bb38 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -535,8 +535,7 @@ config I6300ESB_WDT config INTEL_SCU_WATCHDOG bool "Intel SCU Watchdog for Mobile Platforms" - depends on WATCHDOG - depends on INTEL_SCU_IPC + depends on X86_MRST ---help--- Hardware driver for the watchdog time built into the Intel SCU for Intel Mobile Platforms. diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 750bc5281d79..4ca5d40304b2 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -448,7 +448,7 @@ static void __exit at32_wdt_exit(void) } module_exit(at32_wdt_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index 29a7cd4b90c8..b146082bd85a 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -329,4 +329,4 @@ MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); MODULE_DESCRIPTION("GE watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform: gef_wdt"); +MODULE_ALIAS("platform:gef_wdt"); diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c index 919bdd16136f..ba4386066a42 100644 --- a/drivers/watchdog/intel_scu_watchdog.c +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -42,7 +42,6 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/sfi.h> -#include <linux/types.h> #include <asm/irq.h> #include <asm/atomic.h> #include <asm/intel_scu_ipc.h> diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 1479dc4d6129..0430e093b1a0 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -66,23 +66,18 @@ static struct { int default_ticks; unsigned long inuse; unsigned gpio; - int gstate; + unsigned int gstate; } mtx1_wdt_device; static void mtx1_wdt_trigger(unsigned long unused) { - u32 tmp; - spin_lock(&mtx1_wdt_device.lock); if (mtx1_wdt_device.running) ticks--; /* toggle wdt gpio */ - mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate; - if (mtx1_wdt_device.gstate) - gpio_direction_output(mtx1_wdt_device.gpio, 1); - else - gpio_direction_input(mtx1_wdt_device.gpio); + mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate; + gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate); if (mtx1_wdt_device.queue && ticks) mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); @@ -105,7 +100,7 @@ static void mtx1_wdt_start(void) if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; mtx1_wdt_device.gstate = 1; - gpio_direction_output(mtx1_wdt_device.gpio, 1); + gpio_set_value(mtx1_wdt_device.gpio, 1); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); } mtx1_wdt_device.running++; @@ -120,7 +115,7 @@ static int mtx1_wdt_stop(void) if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; mtx1_wdt_device.gstate = 0; - gpio_direction_output(mtx1_wdt_device.gpio, 0); + gpio_set_value(mtx1_wdt_device.gpio, 0); } ticks = mtx1_wdt_device.default_ticks; spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); @@ -214,6 +209,12 @@ static int __devinit mtx1_wdt_probe(struct platform_device *pdev) int ret; mtx1_wdt_device.gpio = pdev->resource[0].start; + ret = gpio_request_one(mtx1_wdt_device.gpio, + GPIOF_OUT_INIT_HIGH, "mtx1-wdt"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request gpio"); + return ret; + } spin_lock_init(&mtx1_wdt_device.lock); init_completion(&mtx1_wdt_device.stop); @@ -239,11 +240,13 @@ static int __devexit mtx1_wdt_remove(struct platform_device *pdev) mtx1_wdt_device.queue = 0; wait_for_completion(&mtx1_wdt_device.stop); } + + gpio_free(mtx1_wdt_device.gpio); misc_deregister(&mtx1_wdt_misc); return 0; } -static struct platform_driver mtx1_wdt = { +static struct platform_driver mtx1_wdt_driver = { .probe = mtx1_wdt_probe, .remove = __devexit_p(mtx1_wdt_remove), .driver.name = "mtx1-wdt", @@ -252,12 +255,12 @@ static struct platform_driver mtx1_wdt = { static int __init mtx1_wdt_init(void) { - return platform_driver_register(&mtx1_wdt); + return platform_driver_register(&mtx1_wdt_driver); } static void __exit mtx1_wdt_exit(void) { - platform_driver_unregister(&mtx1_wdt); + platform_driver_unregister(&mtx1_wdt_driver); } module_init(mtx1_wdt_init); diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 8c4b2d5bb7da..871caea4e1c6 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -320,6 +320,11 @@ static int __devinit wm831x_wdt_probe(struct platform_device *pdev) struct wm831x_watchdog_pdata *pdata; int reg, ret; + if (wm831x) { + dev_err(&pdev->dev, "wm831x watchdog already registered\n"); + return -EBUSY; + } + wm831x = dev_get_drvdata(pdev->dev.parent); ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG); diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 3ff822b48145..30df85d8fca8 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -395,9 +395,9 @@ static void unmask_evtchn(int port) static void xen_irq_init(unsigned irq) { struct irq_info *info; +#ifdef CONFIG_SMP struct irq_desc *desc = irq_to_desc(irq); -#ifdef CONFIG_SMP /* By default all event channels notify CPU#0. */ cpumask_copy(desc->irq_data.affinity, cpumask_of(0)); #endif @@ -626,6 +626,9 @@ int xen_allocate_pirq_gsi(unsigned gsi) * * Note: We don't assign an event channel until the irq actually started * up. Return an existing irq if we've already got one for the gsi. + * + * Shareable implies level triggered, not shareable implies edge + * triggered here. */ int xen_bind_pirq_gsi_to_irq(unsigned gsi, unsigned pirq, int shareable, char *name) @@ -664,16 +667,13 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, pirq_query_unmask(irq); /* We try to use the handler with the appropriate semantic for the - * type of interrupt: if the interrupt doesn't need an eoi - * (pirq_needs_eoi returns false), we treat it like an edge - * triggered interrupt so we use handle_edge_irq. - * As a matter of fact this only happens when the corresponding - * physical interrupt is edge triggered or an msi. + * type of interrupt: if the interrupt is an edge triggered + * interrupt we use handle_edge_irq. * - * On the other hand if the interrupt needs an eoi (pirq_needs_eoi - * returns true) we treat it like a level triggered interrupt so we - * use handle_fasteoi_irq like the native code does for this kind of + * On the other hand if the interrupt is level triggered we use + * handle_fasteoi_irq like the native code does for this kind of * interrupts. + * * Depending on the Xen version, pirq_needs_eoi might return true * not only for level triggered interrupts but for edge triggered * interrupts too. In any case Xen always honors the eoi mechanism, @@ -681,7 +681,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, * hasn't received an eoi yet. Therefore using the fasteoi handler * is the right choice either way. */ - if (pirq_needs_eoi(irq)) + if (shareable) irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_fasteoi_irq, name); else diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 65ea21a97492..6e8c15a23201 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -147,9 +147,15 @@ void __init xen_swiotlb_init(int verbose) { unsigned long bytes; int rc; - - xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT); - xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE); + unsigned long nr_tbl; + + nr_tbl = swioltb_nr_tbl(); + if (nr_tbl) + xen_io_tlb_nslabs = nr_tbl; + else { + xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT); + xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE); + } bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT; |