diff options
Diffstat (limited to 'drivers')
38 files changed, 3166 insertions, 469 deletions
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index b108f1358a32..4305ee9db4b2 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -309,7 +309,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) * During early init (when acpi_gbl_permanent_mmap has not been set yet) this * routine simply calls __acpi_map_table() to get the job done. */ -void __iomem *__init_refok +void __iomem *__ref acpi_os_map_iomem(acpi_physical_address phys, acpi_size size) { struct acpi_ioremap *map; @@ -362,8 +362,7 @@ out: } EXPORT_SYMBOL_GPL(acpi_os_map_iomem); -void *__init_refok -acpi_os_map_memory(acpi_physical_address phys, acpi_size size) +void *__ref acpi_os_map_memory(acpi_physical_address phys, acpi_size size) { return (void *)acpi_os_map_iomem(phys, size); } diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 773fc3099769..22d1760a4278 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -46,7 +46,8 @@ MODULE_LICENSE("GPL"); extern struct builtin_fw __start_builtin_fw[]; extern struct builtin_fw __end_builtin_fw[]; -static bool fw_get_builtin_firmware(struct firmware *fw, const char *name) +static bool fw_get_builtin_firmware(struct firmware *fw, const char *name, + void *buf, size_t size) { struct builtin_fw *b_fw; @@ -54,6 +55,9 @@ static bool fw_get_builtin_firmware(struct firmware *fw, const char *name) if (strcmp(name, b_fw->name) == 0) { fw->size = b_fw->size; fw->data = b_fw->data; + + if (buf && fw->size <= size) + memcpy(buf, fw->data, fw->size); return true; } } @@ -74,7 +78,9 @@ static bool fw_is_builtin_firmware(const struct firmware *fw) #else /* Module case - no builtin firmware support */ -static inline bool fw_get_builtin_firmware(struct firmware *fw, const char *name) +static inline bool fw_get_builtin_firmware(struct firmware *fw, + const char *name, void *buf, + size_t size) { return false; } @@ -112,6 +118,7 @@ static inline long firmware_loading_timeout(void) #define FW_OPT_FALLBACK 0 #endif #define FW_OPT_NO_WARN (1U << 3) +#define FW_OPT_NOCACHE (1U << 4) struct firmware_cache { /* firmware_buf instance will be added into the below list */ @@ -143,6 +150,7 @@ struct firmware_buf { unsigned long status; void *data; size_t size; + size_t allocated_size; #ifdef CONFIG_FW_LOADER_USER_HELPER bool is_paged_buf; bool need_uevent; @@ -178,7 +186,8 @@ static DEFINE_MUTEX(fw_lock); static struct firmware_cache fw_cache; static struct firmware_buf *__allocate_fw_buf(const char *fw_name, - struct firmware_cache *fwc) + struct firmware_cache *fwc, + void *dbuf, size_t size) { struct firmware_buf *buf; @@ -194,6 +203,8 @@ static struct firmware_buf *__allocate_fw_buf(const char *fw_name, kref_init(&buf->ref); buf->fwc = fwc; + buf->data = dbuf; + buf->allocated_size = size; init_completion(&buf->completion); #ifdef CONFIG_FW_LOADER_USER_HELPER INIT_LIST_HEAD(&buf->pending_list); @@ -217,7 +228,8 @@ static struct firmware_buf *__fw_lookup_buf(const char *fw_name) static int fw_lookup_and_allocate_buf(const char *fw_name, struct firmware_cache *fwc, - struct firmware_buf **buf) + struct firmware_buf **buf, void *dbuf, + size_t size) { struct firmware_buf *tmp; @@ -229,7 +241,7 @@ static int fw_lookup_and_allocate_buf(const char *fw_name, *buf = tmp; return 1; } - tmp = __allocate_fw_buf(fw_name, fwc); + tmp = __allocate_fw_buf(fw_name, fwc, dbuf, size); if (tmp) list_add(&tmp->list, &fwc->head); spin_unlock(&fwc->lock); @@ -261,6 +273,7 @@ static void __fw_free_buf(struct kref *ref) vfree(buf->pages); } else #endif + if (!buf->allocated_size) vfree(buf->data); kfree_const(buf->fw_id); kfree(buf); @@ -301,13 +314,21 @@ static void fw_finish_direct_load(struct device *device, mutex_unlock(&fw_lock); } -static int fw_get_filesystem_firmware(struct device *device, - struct firmware_buf *buf) +static int +fw_get_filesystem_firmware(struct device *device, struct firmware_buf *buf) { loff_t size; int i, len; int rc = -ENOENT; char *path; + enum kernel_read_file_id id = READING_FIRMWARE; + size_t msize = INT_MAX; + + /* Already populated data member means we're loading into a buffer */ + if (buf->data) { + id = READING_FIRMWARE_PREALLOC_BUFFER; + msize = buf->allocated_size; + } path = __getname(); if (!path) @@ -326,8 +347,8 @@ static int fw_get_filesystem_firmware(struct device *device, } buf->size = 0; - rc = kernel_read_file_from_path(path, &buf->data, &size, - INT_MAX, READING_FIRMWARE); + rc = kernel_read_file_from_path(path, &buf->data, &size, msize, + id); if (rc) { if (rc == -ENOENT) dev_dbg(device, "loading %s failed with error %d\n", @@ -691,6 +712,38 @@ out: static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); +static void firmware_rw_buf(struct firmware_buf *buf, char *buffer, + loff_t offset, size_t count, bool read) +{ + if (read) + memcpy(buffer, buf->data + offset, count); + else + memcpy(buf->data + offset, buffer, count); +} + +static void firmware_rw(struct firmware_buf *buf, char *buffer, + loff_t offset, size_t count, bool read) +{ + while (count) { + void *page_data; + int page_nr = offset >> PAGE_SHIFT; + int page_ofs = offset & (PAGE_SIZE-1); + int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); + + page_data = kmap(buf->pages[page_nr]); + + if (read) + memcpy(buffer, page_data + page_ofs, page_cnt); + else + memcpy(page_data + page_ofs, buffer, page_cnt); + + kunmap(buf->pages[page_nr]); + buffer += page_cnt; + offset += page_cnt; + count -= page_cnt; + } +} + static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buffer, loff_t offset, size_t count) @@ -715,21 +768,11 @@ static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj, ret_count = count; - while (count) { - void *page_data; - int page_nr = offset >> PAGE_SHIFT; - int page_ofs = offset & (PAGE_SIZE-1); - int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); - - page_data = kmap(buf->pages[page_nr]); - - memcpy(buffer, page_data + page_ofs, page_cnt); + if (buf->data) + firmware_rw_buf(buf, buffer, offset, count, true); + else + firmware_rw(buf, buffer, offset, count, true); - kunmap(buf->pages[page_nr]); - buffer += page_cnt; - offset += page_cnt; - count -= page_cnt; - } out: mutex_unlock(&fw_lock); return ret_count; @@ -804,29 +847,23 @@ static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj, goto out; } - retval = fw_realloc_buffer(fw_priv, offset + count); - if (retval) - goto out; - - retval = count; - - while (count) { - void *page_data; - int page_nr = offset >> PAGE_SHIFT; - int page_ofs = offset & (PAGE_SIZE - 1); - int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); - - page_data = kmap(buf->pages[page_nr]); - - memcpy(page_data + page_ofs, buffer, page_cnt); + if (buf->data) { + if (offset + count > buf->allocated_size) { + retval = -ENOMEM; + goto out; + } + firmware_rw_buf(buf, buffer, offset, count, false); + retval = count; + } else { + retval = fw_realloc_buffer(fw_priv, offset + count); + if (retval) + goto out; - kunmap(buf->pages[page_nr]); - buffer += page_cnt; - offset += page_cnt; - count -= page_cnt; + retval = count; + firmware_rw(buf, buffer, offset, count, false); } - buf->size = max_t(size_t, offset, buf->size); + buf->size = max_t(size_t, offset + count, buf->size); out: mutex_unlock(&fw_lock); return retval; @@ -894,7 +931,8 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, struct firmware_buf *buf = fw_priv->buf; /* fall back on userspace loading */ - buf->is_paged_buf = true; + if (!buf->data) + buf->is_paged_buf = true; dev_set_uevent_suppress(f_dev, true); @@ -929,7 +967,7 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, if (is_fw_load_aborted(buf)) retval = -EAGAIN; - else if (!buf->data) + else if (buf->is_paged_buf && !buf->data) retval = -ENOMEM; device_del(f_dev); @@ -1012,7 +1050,7 @@ static int sync_cached_firmware_buf(struct firmware_buf *buf) */ static int _request_firmware_prepare(struct firmware **firmware_p, const char *name, - struct device *device) + struct device *device, void *dbuf, size_t size) { struct firmware *firmware; struct firmware_buf *buf; @@ -1025,12 +1063,12 @@ _request_firmware_prepare(struct firmware **firmware_p, const char *name, return -ENOMEM; } - if (fw_get_builtin_firmware(firmware, name)) { + if (fw_get_builtin_firmware(firmware, name, dbuf, size)) { dev_dbg(device, "using built-in %s\n", name); return 0; /* assigned */ } - ret = fw_lookup_and_allocate_buf(name, &fw_cache, &buf); + ret = fw_lookup_and_allocate_buf(name, &fw_cache, &buf, dbuf, size); /* * bind with 'buf' now to avoid warning in failure path @@ -1070,14 +1108,16 @@ static int assign_firmware_buf(struct firmware *fw, struct device *device, * should be fixed in devres or driver core. */ /* don't cache firmware handled without uevent */ - if (device && (opt_flags & FW_OPT_UEVENT)) + if (device && (opt_flags & FW_OPT_UEVENT) && + !(opt_flags & FW_OPT_NOCACHE)) fw_add_devm_name(device, buf->fw_id); /* * After caching firmware image is started, let it piggyback * on request firmware. */ - if (buf->fwc->state == FW_LOADER_START_CACHE) { + if (!(opt_flags & FW_OPT_NOCACHE) && + buf->fwc->state == FW_LOADER_START_CACHE) { if (fw_cache_piggyback_on_request(buf->fw_id)) kref_get(&buf->ref); } @@ -1091,7 +1131,8 @@ static int assign_firmware_buf(struct firmware *fw, struct device *device, /* called from request_firmware() and request_firmware_work_func() */ static int _request_firmware(const struct firmware **firmware_p, const char *name, - struct device *device, unsigned int opt_flags) + struct device *device, void *buf, size_t size, + unsigned int opt_flags) { struct firmware *fw = NULL; long timeout; @@ -1105,7 +1146,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name, goto out; } - ret = _request_firmware_prepare(&fw, name, device); + ret = _request_firmware_prepare(&fw, name, device, buf, size); if (ret <= 0) /* error or already assigned */ goto out; @@ -1184,7 +1225,7 @@ request_firmware(const struct firmware **firmware_p, const char *name, /* Need to pin this module until return */ __module_get(THIS_MODULE); - ret = _request_firmware(firmware_p, name, device, + ret = _request_firmware(firmware_p, name, device, NULL, 0, FW_OPT_UEVENT | FW_OPT_FALLBACK); module_put(THIS_MODULE); return ret; @@ -1208,7 +1249,7 @@ int request_firmware_direct(const struct firmware **firmware_p, int ret; __module_get(THIS_MODULE); - ret = _request_firmware(firmware_p, name, device, + ret = _request_firmware(firmware_p, name, device, NULL, 0, FW_OPT_UEVENT | FW_OPT_NO_WARN); module_put(THIS_MODULE); return ret; @@ -1216,6 +1257,36 @@ int request_firmware_direct(const struct firmware **firmware_p, EXPORT_SYMBOL_GPL(request_firmware_direct); /** + * request_firmware_into_buf - load firmware into a previously allocated buffer + * @firmware_p: pointer to firmware image + * @name: name of firmware file + * @device: device for which firmware is being loaded and DMA region allocated + * @buf: address of buffer to load firmware into + * @size: size of buffer + * + * This function works pretty much like request_firmware(), but it doesn't + * allocate a buffer to hold the firmware data. Instead, the firmware + * is loaded directly into the buffer pointed to by @buf and the @firmware_p + * data member is pointed at @buf. + * + * This function doesn't cache firmware either. + */ +int +request_firmware_into_buf(const struct firmware **firmware_p, const char *name, + struct device *device, void *buf, size_t size) +{ + int ret; + + __module_get(THIS_MODULE); + ret = _request_firmware(firmware_p, name, device, buf, size, + FW_OPT_UEVENT | FW_OPT_FALLBACK | + FW_OPT_NOCACHE); + module_put(THIS_MODULE); + return ret; +} +EXPORT_SYMBOL(request_firmware_into_buf); + +/** * release_firmware: - release the resource associated with a firmware image * @fw: firmware resource to release **/ @@ -1247,7 +1318,7 @@ static void request_firmware_work_func(struct work_struct *work) fw_work = container_of(work, struct firmware_work, work); - _request_firmware(&fw, fw_work->name, fw_work->device, + _request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0, fw_work->opt_flags); fw_work->cont(fw, fw_work->context); put_device(fw_work->device); /* taken in request_firmware_nowait() */ @@ -1380,7 +1451,7 @@ static int uncache_firmware(const char *fw_name) pr_debug("%s: %s\n", __func__, fw_name); - if (fw_get_builtin_firmware(&fw, fw_name)) + if (fw_get_builtin_firmware(&fw, fw_name, NULL, 0)) return 0; buf = fw_lookup_buf(fw_name); diff --git a/drivers/base/node.c b/drivers/base/node.c index 29cd96661b30..5548f9686016 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -370,7 +370,7 @@ int unregister_cpu_under_node(unsigned int cpu, unsigned int nid) #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE #define page_initialized(page) (page->lru.next) -static int __init_refok get_nid_for_pfn(unsigned long pfn) +static int __ref get_nid_for_pfn(unsigned long pfn) { struct page *page; diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index 0a1aaf8c24c4..2d3d50ab74bf 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -27,7 +27,6 @@ #include <linux/crc32c.h> #include <linux/drbd.h> #include <linux/drbd_limits.h> -#include <linux/dynamic_debug.h> #include "drbd_int.h" diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 7b54354976a5..4cb8f21ff4ef 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -41,6 +41,7 @@ #include <linux/backing-dev.h> #include <linux/genhd.h> #include <linux/idr.h> +#include <linux/dynamic_debug.h> #include <net/tcp.h> #include <linux/lru_cache.h> #include <linux/prefetch.h> diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 89cc700fbc37..97ae60fa1584 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -250,7 +250,7 @@ struct clk_lookup_alloc { char con_id[MAX_CON_ID]; }; -static struct clk_lookup * __init_refok +static struct clk_lookup * __ref vclkdev_alloc(struct clk_hw *hw, const char *con_id, const char *dev_fmt, va_list ap) { @@ -287,7 +287,7 @@ vclkdev_create(struct clk_hw *hw, const char *con_id, const char *dev_fmt, return cl; } -struct clk_lookup * __init_refok +struct clk_lookup * __ref clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...) { struct clk_lookup *cl; diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c index 40bb8ae5853c..aacf584f2a42 100644 --- a/drivers/memstick/core/ms_block.c +++ b/drivers/memstick/core/ms_block.c @@ -2338,23 +2338,11 @@ static struct memstick_driver msb_driver = { .resume = msb_resume }; -static int major; - static int __init msb_init(void) { - int rc = register_blkdev(0, DRIVER_NAME); - - if (rc < 0) { - pr_err("failed to register major (error %d)\n", rc); - return rc; - } - - major = rc; - rc = memstick_register_driver(&msb_driver); - if (rc) { - unregister_blkdev(major, DRIVER_NAME); + int rc = memstick_register_driver(&msb_driver); + if (rc) pr_err("failed to register memstick driver (error %d)\n", rc); - } return rc; } @@ -2362,7 +2350,6 @@ static int __init msb_init(void) static void __exit msb_exit(void) { memstick_unregister_driver(&msb_driver); - unregister_blkdev(major, DRIVER_NAME); idr_destroy(&msb_disk_idr); } diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 5f70fee59a94..d6ff5e82377d 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -1086,7 +1086,7 @@ out: return err; } -static void __init_refok pcifront_backend_changed(struct xenbus_device *xdev, +static void __ref pcifront_backend_changed(struct xenbus_device *xdev, enum xenbus_state be_state) { struct pcifront_device *pdev = dev_get_drvdata(&xdev->dev); diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index b5a10d3c92c7..d6d2f20c4597 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -67,6 +67,15 @@ config RAPIDIO_ENUM_BASIC endchoice +config RAPIDIO_CHMAN + tristate "RapidIO Channelized Messaging driver" + depends on RAPIDIO + help + This option includes RapidIO channelized messaging driver which + provides socket-like interface to allow sharing of single RapidIO + messaging mailbox between multiple user-space applications. + See "Documentation/rapidio/rio_cm.txt" for driver description. + config RAPIDIO_MPORT_CDEV tristate "RapidIO /dev mport device driver" depends on RAPIDIO diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index 6271ada6993f..74dcea45ad49 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_RAPIDIO) += rapidio.o rapidio-y := rio.o rio-access.o rio-driver.o rio-sysfs.o obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o +obj-$(CONFIG_RAPIDIO_CHMAN) += rio_cm.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index e165b7ce29d7..436dfe871d32 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv, if (rdev->pef & RIO_PEF_EXT_FEATURES) { rdev->efptr = rval & 0xffff; rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid, - hopcount); + hopcount, &rdev->phys_rmap); rdev->em_efptr = rio_mport_get_feature(mport, 0, destid, hopcount, RIO_EFB_ERR_MGMNT); @@ -2242,7 +2242,7 @@ static void mport_mm_open(struct vm_area_struct *vma) { struct rio_mport_mapping *map = vma->vm_private_data; -rmcd_debug(MMAP, "0x%pad", &map->phys_addr); + rmcd_debug(MMAP, "%pad", &map->phys_addr); kref_get(&map->ref); } @@ -2250,7 +2250,7 @@ static void mport_mm_close(struct vm_area_struct *vma) { struct rio_mport_mapping *map = vma->vm_private_data; -rmcd_debug(MMAP, "0x%pad", &map->phys_addr); + rmcd_debug(MMAP, "%pad", &map->phys_addr); mutex_lock(&map->md->buf_mutex); kref_put(&map->ref, mport_release_mapping); mutex_unlock(&map->md->buf_mutex); diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index b5b455614f8a..32f0f014a067 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -37,11 +37,20 @@ #include "tsi721.h" #ifdef DEBUG -u32 dbg_level = DBG_INIT | DBG_EXIT; +u32 dbg_level; module_param(dbg_level, uint, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)"); #endif +static int pcie_mrrs = -1; +module_param(pcie_mrrs, int, S_IRUGO); +MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)"); + +static u8 mbox_sel = 0x0f; +module_param(mbox_sel, byte, S_IRUGO); +MODULE_PARM_DESC(mbox_sel, + "RIO Messaging MBOX Selection Mask (default: 0x0f = all)"); + static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); @@ -1081,7 +1090,7 @@ static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) * from rstart to lstart. */ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, - u64 rstart, u32 size, u32 flags) + u64 rstart, u64 size, u32 flags) { struct tsi721_device *priv = mport->priv; int i, avail = -1; @@ -1094,6 +1103,10 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, struct tsi721_ib_win_mapping *map = NULL; int ret = -EBUSY; + /* Max IBW size supported by HW is 16GB */ + if (size > 0x400000000UL) + return -EINVAL; + if (direct) { /* Calculate minimal acceptable window size and base address */ @@ -1101,15 +1114,15 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, ibw_start = lstart & ~(ibw_size - 1); tsi_debug(IBW, &priv->pdev->dev, - "Direct (RIO_0x%llx -> PCIe_0x%pad), size=0x%x, ibw_start = 0x%llx", + "Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx", rstart, &lstart, size, ibw_start); while ((lstart + size) > (ibw_start + ibw_size)) { ibw_size *= 2; ibw_start = lstart & ~(ibw_size - 1); - if (ibw_size > 0x80000000) { /* Limit max size to 2GB */ + /* Check for crossing IBW max size 16GB */ + if (ibw_size > 0x400000000UL) return -EBUSY; - } } loc_start = ibw_start; @@ -1120,7 +1133,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, } else { tsi_debug(IBW, &priv->pdev->dev, - "Translated (RIO_0x%llx -> PCIe_0x%pad), size=0x%x", + "Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx", rstart, &lstart, size); if (!is_power_of_2(size) || size < 0x1000 || @@ -1215,7 +1228,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, priv->ibwin_cnt--; tsi_debug(IBW, &priv->pdev->dev, - "Configured IBWIN%d (RIO_0x%llx -> PCIe_0x%pad), size=0x%llx", + "Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx", i, ibw_start, &loc_start, ibw_size); return 0; @@ -1237,7 +1250,7 @@ static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport, int i; tsi_debug(IBW, &priv->pdev->dev, - "Unmap IBW mapped to PCIe_0x%pad", &lstart); + "Unmap IBW mapped to PCIe_%pad", &lstart); /* Search for matching active inbound translation window */ for (i = 0; i < TSI721_IBWIN_NUM; i++) { @@ -1877,6 +1890,11 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, goto out; } + if ((mbox_sel & (1 << mbox)) == 0) { + rc = -ENODEV; + goto out; + } + priv->omsg_ring[mbox].dev_id = dev_id; priv->omsg_ring[mbox].size = entries; priv->omsg_ring[mbox].sts_rdptr = 0; @@ -2161,6 +2179,11 @@ static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id, goto out; } + if ((mbox_sel & (1 << mbox)) == 0) { + rc = -ENODEV; + goto out; + } + /* Initialize IB Messaging Ring */ priv->imsg_ring[mbox].dev_id = dev_id; priv->imsg_ring[mbox].size = entries; @@ -2532,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport, struct tsi721_device *priv = mport->priv; u32 rval; - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_ERR_STS_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0)); if (rval & RIO_PORT_N_ERR_STS_PORT_OK) { - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL2_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0)); attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28; - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0)); attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27; } else attr->link_speed = RIO_LINK_DOWN; @@ -2650,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv) mport->ops = &tsi721_rio_ops; mport->index = 0; mport->sys_size = 0; /* small system */ - mport->phy_type = RIO_PHY_SERIAL; mport->priv = (void *)priv; mport->phys_efptr = 0x100; + mport->phys_rmap = 1; mport->dev.parent = &pdev->dev; mport->dev.release = tsi721_mport_release; @@ -2840,6 +2863,16 @@ static int tsi721_probe(struct pci_dev *pdev, pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0); + /* Override PCIe Maximum Read Request Size setting if requested */ + if (pcie_mrrs >= 0) { + if (pcie_mrrs <= 5) + pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12); + else + tsi_info(&pdev->dev, + "Invalid MRRS override value %d", pcie_mrrs); + } + /* Adjust PCIe completion timeout. */ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2); diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h index 5456dbddc929..5941437cbdd1 100644 --- a/drivers/rapidio/devices/tsi721.h +++ b/drivers/rapidio/devices/tsi721.h @@ -661,7 +661,7 @@ enum dma_rtype { */ #define TSI721_DMA_CHNUM TSI721_DMA_MAXCH -#define TSI721_DMACH_MAINT 0 /* DMA channel for maint requests */ +#define TSI721_DMACH_MAINT 7 /* DMA channel for maint requests */ #define TSI721_DMACH_MAINT_NBD 32 /* Number of BDs for maint requests */ #define TSI721_DMACH_DMA 1 /* DMA channel for data transfers */ diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c index 155cae1e62de..e2a418598129 100644 --- a/drivers/rapidio/devices/tsi721_dma.c +++ b/drivers/rapidio/devices/tsi721_dma.c @@ -36,18 +36,26 @@ #include "tsi721.h" -#define TSI721_DMA_TX_QUEUE_SZ 16 /* number of transaction descriptors */ - #ifdef CONFIG_PCI_MSI static irqreturn_t tsi721_bdma_msix(int irq, void *ptr); #endif static int tsi721_submit_sg(struct tsi721_tx_desc *desc); static unsigned int dma_desc_per_channel = 128; -module_param(dma_desc_per_channel, uint, S_IWUSR | S_IRUGO); +module_param(dma_desc_per_channel, uint, S_IRUGO); MODULE_PARM_DESC(dma_desc_per_channel, "Number of DMA descriptors per channel (default: 128)"); +static unsigned int dma_txqueue_sz = 16; +module_param(dma_txqueue_sz, uint, S_IRUGO); +MODULE_PARM_DESC(dma_txqueue_sz, + "DMA Transactions Queue Size (default: 16)"); + +static u8 dma_sel = 0x7f; +module_param(dma_sel, byte, S_IRUGO); +MODULE_PARM_DESC(dma_sel, + "DMA Channel Selection Mask (default: 0x7f = all)"); + static inline struct tsi721_bdma_chan *to_tsi721_chan(struct dma_chan *chan) { return container_of(chan, struct tsi721_bdma_chan, dchan); @@ -718,6 +726,7 @@ static dma_cookie_t tsi721_tx_submit(struct dma_async_tx_descriptor *txd) cookie = dma_cookie_assign(txd); desc->status = DMA_IN_PROGRESS; list_add_tail(&desc->desc_node, &bdma_chan->queue); + tsi721_advance_work(bdma_chan, NULL); spin_unlock_bh(&bdma_chan->lock); return cookie; @@ -732,7 +741,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan) tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id); if (bdma_chan->bd_base) - return TSI721_DMA_TX_QUEUE_SZ; + return dma_txqueue_sz; /* Initialize BDMA channel */ if (tsi721_bdma_ch_init(bdma_chan, dma_desc_per_channel)) { @@ -742,7 +751,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan) } /* Allocate queue of transaction descriptors */ - desc = kcalloc(TSI721_DMA_TX_QUEUE_SZ, sizeof(struct tsi721_tx_desc), + desc = kcalloc(dma_txqueue_sz, sizeof(struct tsi721_tx_desc), GFP_ATOMIC); if (!desc) { tsi_err(&dchan->dev->device, @@ -754,7 +763,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan) bdma_chan->tx_desc = desc; - for (i = 0; i < TSI721_DMA_TX_QUEUE_SZ; i++) { + for (i = 0; i < dma_txqueue_sz; i++) { dma_async_tx_descriptor_init(&desc[i].txd, dchan); desc[i].txd.tx_submit = tsi721_tx_submit; desc[i].txd.flags = DMA_CTRL_ACK; @@ -766,7 +775,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan) bdma_chan->active = true; tsi721_bdma_interrupt_enable(bdma_chan, 1); - return TSI721_DMA_TX_QUEUE_SZ; + return dma_txqueue_sz; } static void tsi721_sync_dma_irq(struct tsi721_bdma_chan *bdma_chan) @@ -962,7 +971,7 @@ void tsi721_dma_stop_all(struct tsi721_device *priv) int i; for (i = 0; i < TSI721_DMA_MAXCH; i++) { - if (i != TSI721_DMACH_MAINT) + if ((i != TSI721_DMACH_MAINT) && (dma_sel & (1 << i))) tsi721_dma_stop(&priv->bdma[i]); } } @@ -979,7 +988,7 @@ int tsi721_register_dma(struct tsi721_device *priv) for (i = 0; i < TSI721_DMA_MAXCH; i++) { struct tsi721_bdma_chan *bdma_chan = &priv->bdma[i]; - if (i == TSI721_DMACH_MAINT) + if ((i == TSI721_DMACH_MAINT) || (dma_sel & (1 << i)) == 0) continue; bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i); diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a63a380809d1..23429bdaca84 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -49,15 +49,6 @@ struct rio_id_table { static int next_destid = 0; static int next_comptag = 1; -static int rio_mport_phys_table[] = { - RIO_EFB_PAR_EP_ID, - RIO_EFB_PAR_EP_REC_ID, - RIO_EFB_SER_EP_ID, - RIO_EFB_SER_EP_REC_ID, - -1, -}; - - /** * rio_destid_alloc - Allocate next available destID for given network * @net: RIO network @@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, if (rdev->pef & RIO_PEF_EXT_FEATURES) { rdev->efptr = result & 0xffff; rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid, - hopcount); + hopcount, &rdev->phys_rmap); + pr_debug("RIO: %s Register Map %d device\n", + __func__, rdev->phys_rmap); rdev->em_efptr = rio_mport_get_feature(port, 0, destid, hopcount, RIO_EFB_ERR_MGMNT); + if (!rdev->em_efptr) + rdev->em_efptr = rio_mport_get_feature(port, 0, destid, + hopcount, RIO_EFB_ERR_MGMNT_HS); } rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR, @@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); } else { if (do_enum) - /*Enable Input Output Port (transmitter reviever)*/ + /*Enable Input Output Port (transmitter receiver)*/ rio_enable_rx_tx_port(port, 0, destid, hopcount, 0); dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id, @@ -481,10 +477,8 @@ cleanup: /** * rio_sport_is_active- Tests if a switch port has an active connection. - * @port: Master port to send transaction - * @destid: Associated destination ID for switch - * @hopcount: Hopcount to reach switch - * @sport: Switch port number + * @rdev: RapidIO device object + * @sp: Switch port number * * Reads the port error status CSR for a particular switch port to * determine if the port has an active link. Returns @@ -492,31 +486,12 @@ cleanup: * inactive. */ static int -rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) +rio_sport_is_active(struct rio_dev *rdev, int sp) { u32 result = 0; - u32 ext_ftr_ptr; - ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0); - - while (ext_ftr_ptr) { - rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr, &result); - result = RIO_GET_BLOCK_ID(result); - if ((result == RIO_EFB_SER_EP_FREE_ID) || - (result == RIO_EFB_SER_EP_FREE_ID_V13P) || - (result == RIO_EFB_SER_EP_FREC_ID)) - break; - - ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, - ext_ftr_ptr); - } - - if (ext_ftr_ptr) - rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + - RIO_PORT_N_ERR_STS_CSR(sport), - &result); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp), + &result); return result & RIO_PORT_N_ERR_STS_PORT_OK; } @@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, cur_destid = next_destid; - if (rio_sport_is_active - (port, RIO_ANY_DESTID(port->sys_size), hopcount, - port_num)) { + if (rio_sport_is_active(rdev, port_num)) { pr_debug( "RIO: scanning device on port %d\n", port_num); @@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num) continue; - if (rio_sport_is_active - (port, destid, hopcount, port_num)) { + if (rio_sport_is_active(rdev, port_num)) { pr_debug( "RIO: scanning device on port %d\n", port_num); @@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, static int rio_mport_is_active(struct rio_mport *port) { u32 result = 0; - u32 ext_ftr_ptr; - int *entry = rio_mport_phys_table; - - do { - if ((ext_ftr_ptr = - rio_mport_get_feature(port, 1, 0, 0, *entry))) - break; - } while (*++entry >= 0); - - if (ext_ftr_ptr) - rio_local_read_config_32(port, - ext_ftr_ptr + - RIO_PORT_N_ERR_STS_CSR(port->index), - &result); + rio_local_read_config_32(port, + port->phys_efptr + + RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap), + &result); return result & RIO_PORT_N_ERR_STS_PORT_OK; } diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 0dcaa660cba1..37042858c2db 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -268,6 +268,12 @@ int rio_request_inb_mbox(struct rio_mport *mport, mport->inb_msg[mbox].mcback = minb; rc = mport->ops->open_inb_mbox(mport, dev_id, mbox, entries); + if (rc) { + mport->inb_msg[mbox].mcback = NULL; + mport->inb_msg[mbox].res = NULL; + release_resource(res); + kfree(res); + } } else rc = -ENOMEM; @@ -285,13 +291,22 @@ int rio_request_inb_mbox(struct rio_mport *mport, */ int rio_release_inb_mbox(struct rio_mport *mport, int mbox) { - if (mport->ops->close_inb_mbox) { - mport->ops->close_inb_mbox(mport, mbox); + int rc; - /* Release the mailbox resource */ - return release_resource(mport->inb_msg[mbox].res); - } else - return -ENOSYS; + if (!mport->ops->close_inb_mbox || !mport->inb_msg[mbox].res) + return -EINVAL; + + mport->ops->close_inb_mbox(mport, mbox); + mport->inb_msg[mbox].mcback = NULL; + + rc = release_resource(mport->inb_msg[mbox].res); + if (rc) + return rc; + + kfree(mport->inb_msg[mbox].res); + mport->inb_msg[mbox].res = NULL; + + return 0; } /** @@ -336,6 +351,12 @@ int rio_request_outb_mbox(struct rio_mport *mport, mport->outb_msg[mbox].mcback = moutb; rc = mport->ops->open_outb_mbox(mport, dev_id, mbox, entries); + if (rc) { + mport->outb_msg[mbox].mcback = NULL; + mport->outb_msg[mbox].res = NULL; + release_resource(res); + kfree(res); + } } else rc = -ENOMEM; @@ -353,13 +374,22 @@ int rio_request_outb_mbox(struct rio_mport *mport, */ int rio_release_outb_mbox(struct rio_mport *mport, int mbox) { - if (mport->ops->close_outb_mbox) { - mport->ops->close_outb_mbox(mport, mbox); + int rc; - /* Release the mailbox resource */ - return release_resource(mport->outb_msg[mbox].res); - } else - return -ENOSYS; + if (!mport->ops->close_outb_mbox || !mport->outb_msg[mbox].res) + return -EINVAL; + + mport->ops->close_outb_mbox(mport, mbox); + mport->outb_msg[mbox].mcback = NULL; + + rc = release_resource(mport->outb_msg[mbox].res); + if (rc) + return rc; + + kfree(mport->outb_msg[mbox].res); + mport->outb_msg[mbox].res = NULL; + + return 0; } /** @@ -756,10 +786,11 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region); * @local: Indicate a local master port or remote device access * @destid: Destination ID of the device * @hopcount: Number of switch hops to the device + * @rmap: pointer to location to store register map type info */ u32 rio_mport_get_physefb(struct rio_mport *port, int local, - u16 destid, u8 hopcount) + u16 destid, u8 hopcount, u32 *rmap) { u32 ext_ftr_ptr; u32 ftr_header; @@ -777,14 +808,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local, ftr_header = RIO_GET_BLOCK_ID(ftr_header); switch (ftr_header) { - case RIO_EFB_SER_EP_ID_V13P: - case RIO_EFB_SER_EP_REC_ID_V13P: - case RIO_EFB_SER_EP_FREE_ID_V13P: case RIO_EFB_SER_EP_ID: case RIO_EFB_SER_EP_REC_ID: case RIO_EFB_SER_EP_FREE_ID: - case RIO_EFB_SER_EP_FREC_ID: + case RIO_EFB_SER_EP_M1_ID: + case RIO_EFB_SER_EP_SW_M1_ID: + case RIO_EFB_SER_EPF_M1_ID: + case RIO_EFB_SER_EPF_SW_M1_ID: + *rmap = 1; + return ext_ftr_ptr; + case RIO_EFB_SER_EP_M2_ID: + case RIO_EFB_SER_EP_SW_M2_ID: + case RIO_EFB_SER_EPF_M2_ID: + case RIO_EFB_SER_EPF_SW_M2_ID: + *rmap = 2; return ext_ftr_ptr; default: @@ -843,16 +881,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) u32 regval; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), - ®val); + RIO_DEV_PORT_N_CTL_CSR(rdev, pnum), + ®val); if (lock) regval |= RIO_PORT_N_CTL_LOCKOUT; else regval &= ~RIO_PORT_N_CTL_LOCKOUT; rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), - regval); + RIO_DEV_PORT_N_CTL_CSR(rdev, pnum), + regval); return 0; } EXPORT_SYMBOL_GPL(rio_set_port_lockout); @@ -876,6 +914,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port, #ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS u32 regval; u32 ext_ftr_ptr; + u32 rmap; /* * enable rx input tx output port @@ -883,34 +922,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port, pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " "%d, port_num = %d)\n", local, destid, hopcount, port_num); - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, + hopcount, &rmap); if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), + rio_local_read_config_32(port, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), ®val); } else { if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap), + ®val) < 0) return -EIO; } - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } + regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX; if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); + rio_local_write_config_32(port, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval); } else { if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap), + regval) < 0) return -EIO; } #endif @@ -1012,14 +1046,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) /* Read from link maintenance response register * to clear valid bit */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum), ®val); udelay(50); } /* Issue Input-status command */ rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum), + RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum), RIO_MNT_REQ_CMD_IS); /* Exit if the response is not expected */ @@ -1030,7 +1064,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) while (checkcount--) { udelay(50); rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum), ®val); if (regval & RIO_PORT_N_MNT_RSP_RVAL) { *lnkresp = regval; @@ -1046,6 +1080,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) * @rdev: Pointer to RIO device control structure * @pnum: Switch port number to clear errors * @err_status: port error status (if 0 reads register from device) + * + * TODO: Currently this routine is not compatible with recovery process + * specified for idt_gen3 RapidIO switch devices. It has to be reviewed + * to implement universal recovery process that is compatible full range + * off available devices. + * IDT gen3 switch driver now implements HW-specific error handler that + * issues soft port reset to the port to reset ERR_STOP bits and ackIDs. */ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) { @@ -1055,10 +1096,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) if (err_status == 0) rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), &err_status); - if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) { + if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) { pr_debug("RIO_EM: servicing Output Error-Stopped state\n"); /* * Send a Link-Request/Input-Status control symbol @@ -1073,7 +1114,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5; far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum), ®val); pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval); near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24; @@ -1091,43 +1132,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) * far inbound. */ rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum), (near_ackid << 24) | (far_ackid << 8) | far_ackid); /* Align far outstanding/outbound ackIDs with * near inbound. */ far_ackid++; - if (nextdev) - rio_write_config_32(nextdev, - nextdev->phys_efptr + - RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)), - (far_ackid << 24) | - (near_ackid << 8) | near_ackid); - else - pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n"); + if (!nextdev) { + pr_debug("RIO_EM: nextdev pointer == NULL\n"); + goto rd_err; + } + + rio_write_config_32(nextdev, + RIO_DEV_PORT_N_ACK_STS_CSR(nextdev, + RIO_GET_PORT_NUM(nextdev->swpinfo)), + (far_ackid << 24) | + (near_ackid << 8) | near_ackid); } rd_err: - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), + &err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); } - if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) { + if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) { pr_debug("RIO_EM: servicing Input Error-Stopped state\n"); rio_get_input_status(nextdev, RIO_GET_PORT_NUM(nextdev->swpinfo), NULL); udelay(50); - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), + &err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); } - return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0; + return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0; } /** @@ -1227,9 +1268,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle) rdev->rswitch->ops->em_handle(rdev, portnum); - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + &err_status); pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status); if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) { @@ -1246,8 +1286,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) * Depending on the link partner state, two attempts * may be needed for successful recovery. */ - if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES)) { + if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES)) { if (rio_clr_err_stopped(rdev, portnum, err_status)) rio_clr_err_stopped(rdev, portnum, 0); } @@ -1257,10 +1297,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) rdev->rswitch->port_ok &= ~(1 << portnum); rio_set_port_lockout(rdev, portnum, 1); + if (rdev->phys_rmap == 1) { rio_write_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ACK_STS_CSR(portnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum), RIO_PORT_N_ACK_CLEAR); + } else { + rio_write_config_32(rdev, + RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum), + RIO_PORT_N_OB_ACK_CLEAR); + rio_write_config_32(rdev, + RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum), + 0); + } /* Schedule Extraction Service */ pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n", @@ -1289,9 +1337,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) } /* Clear remaining error bits and Port-Write Pending bit */ - rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), - err_status); + rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + err_status); return 0; } @@ -1342,20 +1389,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb); * Tell if a device supports a given RapidIO capability. * Returns the offset of the requested extended feature * block within the device's RIO configuration space or - * 0 in case the device does not support it. Possible - * values for @ftr: - * - * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices - * - * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices - * - * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices - * - * %RIO_EFB_SER_EP_ID LP/Serial EP Devices - * - * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices - * - * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices + * 0 in case the device does not support it. */ u32 rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, @@ -1848,7 +1882,9 @@ EXPORT_SYMBOL_GPL(rio_release_dma); * Initializes RapidIO capable DMA channel for the specified data transfer. * Uses DMA channel private extension to pass information related to remote * target RIO device. - * Returns pointer to DMA transaction descriptor or NULL if failed. + * + * Returns: pointer to DMA transaction descriptor if successful, + * error-valued pointer or NULL if failed. */ struct dma_async_tx_descriptor *rio_dma_prep_xfer(struct dma_chan *dchan, u16 destid, struct rio_dma_data *data, @@ -1883,7 +1919,9 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_xfer); * Initializes RapidIO capable DMA channel for the specified data transfer. * Uses DMA channel private extension to pass information related to remote * target RIO device. - * Returns pointer to DMA transaction descriptor or NULL if failed. + * + * Returns: pointer to DMA transaction descriptor if successful, + * error-valued pointer or NULL if failed. */ struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev, struct dma_chan *dchan, struct rio_dma_data *data, diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 625d09add001..9796b3fee70d 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -22,7 +22,7 @@ extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid, u8 hopcount, int ftr); extern u32 rio_mport_get_physefb(struct rio_mport *port, int local, - u16 destid, u8 hopcount); + u16 destid, u8 hopcount, u32 *rmap); extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, u8 hopcount, u32 from); extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c new file mode 100644 index 000000000000..cecc15a880de --- /dev/null +++ b/drivers/rapidio/rio_cm.c @@ -0,0 +1,2366 @@ +/* + * rio_cm - RapidIO Channelized Messaging Driver + * + * Copyright 2013-2016 Integrated Device Technology, Inc. + * Copyright (c) 2015, Prodrive Technologies + * Copyright (c) 2015, RapidIO Trade Association + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS PROGRAM IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, + * BUT WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED WARRANTY OF + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SEE THE + * GNU GENERAL PUBLIC LICENSE FOR MORE DETAILS. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/slab.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/cdev.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/reboot.h> +#include <linux/bitops.h> +#include <linux/printk.h> +#include <linux/rio_cm_cdev.h> + +#define DRV_NAME "rio_cm" +#define DRV_VERSION "1.0.0" +#define DRV_AUTHOR "Alexandre Bounine <alexandre.bounine@idt.com>" +#define DRV_DESC "RapidIO Channelized Messaging Driver" +#define DEV_NAME "rio_cm" + +/* Debug output filtering masks */ +enum { + DBG_NONE = 0, + DBG_INIT = BIT(0), /* driver init */ + DBG_EXIT = BIT(1), /* driver exit */ + DBG_MPORT = BIT(2), /* mport add/remove */ + DBG_RDEV = BIT(3), /* RapidIO device add/remove */ + DBG_CHOP = BIT(4), /* channel operations */ + DBG_WAIT = BIT(5), /* waiting for events */ + DBG_TX = BIT(6), /* message TX */ + DBG_TX_EVENT = BIT(7), /* message TX event */ + DBG_RX_DATA = BIT(8), /* inbound data messages */ + DBG_RX_CMD = BIT(9), /* inbound REQ/ACK/NACK messages */ + DBG_ALL = ~0, +}; + +#ifdef DEBUG +#define riocm_debug(level, fmt, arg...) \ + do { \ + if (DBG_##level & dbg_level) \ + pr_debug(DRV_NAME ": %s " fmt "\n", \ + __func__, ##arg); \ + } while (0) +#else +#define riocm_debug(level, fmt, arg...) \ + no_printk(KERN_DEBUG pr_fmt(DRV_NAME fmt "\n"), ##arg) +#endif + +#define riocm_warn(fmt, arg...) \ + pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg) + +#define riocm_error(fmt, arg...) \ + pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg) + + +static int cmbox = 1; +module_param(cmbox, int, S_IRUGO); +MODULE_PARM_DESC(cmbox, "RapidIO Mailbox number (default 1)"); + +static int chstart = 256; +module_param(chstart, int, S_IRUGO); +MODULE_PARM_DESC(chstart, + "Start channel number for dynamic allocation (default 256)"); + +#ifdef DEBUG +static u32 dbg_level = DBG_NONE; +module_param(dbg_level, uint, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)"); +#endif + +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#define RIOCM_TX_RING_SIZE 128 +#define RIOCM_RX_RING_SIZE 128 +#define RIOCM_CONNECT_TO 3 /* connect response TO (in sec) */ + +#define RIOCM_MAX_CHNUM 0xffff /* Use full range of u16 field */ +#define RIOCM_CHNUM_AUTO 0 +#define RIOCM_MAX_EP_COUNT 0x10000 /* Max number of endpoints */ + +enum rio_cm_state { + RIO_CM_IDLE, + RIO_CM_CONNECT, + RIO_CM_CONNECTED, + RIO_CM_DISCONNECT, + RIO_CM_CHAN_BOUND, + RIO_CM_LISTEN, + RIO_CM_DESTROYING, +}; + +enum rio_cm_pkt_type { + RIO_CM_SYS = 0xaa, + RIO_CM_CHAN = 0x55, +}; + +enum rio_cm_chop { + CM_CONN_REQ, + CM_CONN_ACK, + CM_CONN_CLOSE, + CM_DATA_MSG, +}; + +struct rio_ch_base_bhdr { + u32 src_id; + u32 dst_id; +#define RIO_HDR_LETTER_MASK 0xffff0000 +#define RIO_HDR_MBOX_MASK 0x0000ffff + u8 src_mbox; + u8 dst_mbox; + u8 type; +} __attribute__((__packed__)); + +struct rio_ch_chan_hdr { + struct rio_ch_base_bhdr bhdr; + u8 ch_op; + u16 dst_ch; + u16 src_ch; + u16 msg_len; + u16 rsrvd; +} __attribute__((__packed__)); + +struct tx_req { + struct list_head node; + struct rio_dev *rdev; + void *buffer; + size_t len; +}; + +struct cm_dev { + struct list_head list; + struct rio_mport *mport; + void *rx_buf[RIOCM_RX_RING_SIZE]; + int rx_slots; + struct mutex rx_lock; + + void *tx_buf[RIOCM_TX_RING_SIZE]; + int tx_slot; + int tx_cnt; + int tx_ack_slot; + struct list_head tx_reqs; + spinlock_t tx_lock; + + struct list_head peers; + u32 npeers; + struct workqueue_struct *rx_wq; + struct work_struct rx_work; +}; + +struct chan_rx_ring { + void *buf[RIOCM_RX_RING_SIZE]; + int head; + int tail; + int count; + + /* Tracking RX buffers reported to upper level */ + void *inuse[RIOCM_RX_RING_SIZE]; + int inuse_cnt; +}; + +struct rio_channel { + u16 id; /* local channel ID */ + struct kref ref; /* channel refcount */ + struct file *filp; + struct cm_dev *cmdev; /* associated CM device object */ + struct rio_dev *rdev; /* remote RapidIO device */ + enum rio_cm_state state; + int error; + spinlock_t lock; + void *context; + u32 loc_destid; /* local destID */ + u32 rem_destid; /* remote destID */ + u16 rem_channel; /* remote channel ID */ + struct list_head accept_queue; + struct list_head ch_node; + struct completion comp; + struct completion comp_close; + struct chan_rx_ring rx_ring; +}; + +struct cm_peer { + struct list_head node; + struct rio_dev *rdev; +}; + +struct rio_cm_work { + struct work_struct work; + struct cm_dev *cm; + void *data; +}; + +struct conn_req { + struct list_head node; + u32 destid; /* requester destID */ + u16 chan; /* requester channel ID */ + struct cm_dev *cmdev; +}; + +/* + * A channel_dev structure represents a CM_CDEV + * @cdev Character device + * @dev Associated device object + */ +struct channel_dev { + struct cdev cdev; + struct device *dev; +}; + +static struct rio_channel *riocm_ch_alloc(u16 ch_num); +static void riocm_ch_free(struct kref *ref); +static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, + void *buffer, size_t len); +static int riocm_ch_close(struct rio_channel *ch); + +static DEFINE_SPINLOCK(idr_lock); +static DEFINE_IDR(ch_idr); + +static LIST_HEAD(cm_dev_list); +static DECLARE_RWSEM(rdev_sem); + +static struct class *dev_class; +static unsigned int dev_major; +static unsigned int dev_minor_base; +static dev_t dev_number; +static struct channel_dev riocm_cdev; + +#define is_msg_capable(src_ops, dst_ops) \ + ((src_ops & RIO_SRC_OPS_DATA_MSG) && \ + (dst_ops & RIO_DST_OPS_DATA_MSG)) +#define dev_cm_capable(dev) \ + is_msg_capable(dev->src_ops, dev->dst_ops) + +static int riocm_cmp(struct rio_channel *ch, enum rio_cm_state cmp) +{ + int ret; + + spin_lock_bh(&ch->lock); + ret = (ch->state == cmp); + spin_unlock_bh(&ch->lock); + return ret; +} + +static int riocm_cmp_exch(struct rio_channel *ch, + enum rio_cm_state cmp, enum rio_cm_state exch) +{ + int ret; + + spin_lock_bh(&ch->lock); + ret = (ch->state == cmp); + if (ret) + ch->state = exch; + spin_unlock_bh(&ch->lock); + return ret; +} + +static enum rio_cm_state riocm_exch(struct rio_channel *ch, + enum rio_cm_state exch) +{ + enum rio_cm_state old; + + spin_lock_bh(&ch->lock); + old = ch->state; + ch->state = exch; + spin_unlock_bh(&ch->lock); + return old; +} + +static struct rio_channel *riocm_get_channel(u16 nr) +{ + struct rio_channel *ch; + + spin_lock_bh(&idr_lock); + ch = idr_find(&ch_idr, nr); + if (ch) + kref_get(&ch->ref); + spin_unlock_bh(&idr_lock); + return ch; +} + +static void riocm_put_channel(struct rio_channel *ch) +{ + kref_put(&ch->ref, riocm_ch_free); +} + +static void *riocm_rx_get_msg(struct cm_dev *cm) +{ + void *msg; + int i; + + msg = rio_get_inb_message(cm->mport, cmbox); + if (msg) { + for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { + if (cm->rx_buf[i] == msg) { + cm->rx_buf[i] = NULL; + cm->rx_slots++; + break; + } + } + + if (i == RIOCM_RX_RING_SIZE) + riocm_warn("no record for buffer 0x%p", msg); + } + + return msg; +} + +/* + * riocm_rx_fill - fills a ring of receive buffers for given cm device + * @cm: cm_dev object + * @nent: max number of entries to fill + * + * Returns: none + */ +static void riocm_rx_fill(struct cm_dev *cm, int nent) +{ + int i; + + if (cm->rx_slots == 0) + return; + + for (i = 0; i < RIOCM_RX_RING_SIZE && cm->rx_slots && nent; i++) { + if (cm->rx_buf[i] == NULL) { + cm->rx_buf[i] = kmalloc(RIO_MAX_MSG_SIZE, GFP_KERNEL); + if (cm->rx_buf[i] == NULL) + break; + rio_add_inb_buffer(cm->mport, cmbox, cm->rx_buf[i]); + cm->rx_slots--; + nent--; + } + } +} + +/* + * riocm_rx_free - frees all receive buffers associated with given cm device + * @cm: cm_dev object + * + * Returns: none + */ +static void riocm_rx_free(struct cm_dev *cm) +{ + int i; + + for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { + if (cm->rx_buf[i] != NULL) { + kfree(cm->rx_buf[i]); + cm->rx_buf[i] = NULL; + } + } +} + +/* + * riocm_req_handler - connection request handler + * @cm: cm_dev object + * @req_data: pointer to the request packet + * + * Returns: 0 if success, or + * -EINVAL if channel is not in correct state, + * -ENODEV if cannot find a channel with specified ID, + * -ENOMEM if unable to allocate memory to store the request + */ +static int riocm_req_handler(struct cm_dev *cm, void *req_data) +{ + struct rio_channel *ch; + struct conn_req *req; + struct rio_ch_chan_hdr *hh = req_data; + u16 chnum; + + chnum = ntohs(hh->dst_ch); + + ch = riocm_get_channel(chnum); + + if (!ch) + return -ENODEV; + + if (ch->state != RIO_CM_LISTEN) { + riocm_debug(RX_CMD, "channel %d is not in listen state", chnum); + riocm_put_channel(ch); + return -EINVAL; + } + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) { + riocm_put_channel(ch); + return -ENOMEM; + } + + req->destid = ntohl(hh->bhdr.src_id); + req->chan = ntohs(hh->src_ch); + req->cmdev = cm; + + spin_lock_bh(&ch->lock); + list_add_tail(&req->node, &ch->accept_queue); + spin_unlock_bh(&ch->lock); + complete(&ch->comp); + riocm_put_channel(ch); + + return 0; +} + +/* + * riocm_resp_handler - response to connection request handler + * @resp_data: pointer to the response packet + * + * Returns: 0 if success, or + * -EINVAL if channel is not in correct state, + * -ENODEV if cannot find a channel with specified ID, + */ +static int riocm_resp_handler(void *resp_data) +{ + struct rio_channel *ch; + struct rio_ch_chan_hdr *hh = resp_data; + u16 chnum; + + chnum = ntohs(hh->dst_ch); + ch = riocm_get_channel(chnum); + if (!ch) + return -ENODEV; + + if (ch->state != RIO_CM_CONNECT) { + riocm_put_channel(ch); + return -EINVAL; + } + + riocm_exch(ch, RIO_CM_CONNECTED); + ch->rem_channel = ntohs(hh->src_ch); + complete(&ch->comp); + riocm_put_channel(ch); + + return 0; +} + +/* + * riocm_close_handler - channel close request handler + * @req_data: pointer to the request packet + * + * Returns: 0 if success, or + * -ENODEV if cannot find a channel with specified ID, + * + error codes returned by riocm_ch_close. + */ +static int riocm_close_handler(void *data) +{ + struct rio_channel *ch; + struct rio_ch_chan_hdr *hh = data; + int ret; + + riocm_debug(RX_CMD, "for ch=%d", ntohs(hh->dst_ch)); + + spin_lock_bh(&idr_lock); + ch = idr_find(&ch_idr, ntohs(hh->dst_ch)); + if (!ch) { + spin_unlock_bh(&idr_lock); + return -ENODEV; + } + idr_remove(&ch_idr, ch->id); + spin_unlock_bh(&idr_lock); + + riocm_exch(ch, RIO_CM_DISCONNECT); + + ret = riocm_ch_close(ch); + if (ret) + riocm_debug(RX_CMD, "riocm_ch_close() returned %d", ret); + + return 0; +} + +/* + * rio_cm_handler - function that services request (non-data) packets + * @cm: cm_dev object + * @data: pointer to the packet + */ +static void rio_cm_handler(struct cm_dev *cm, void *data) +{ + struct rio_ch_chan_hdr *hdr; + + if (!rio_mport_is_running(cm->mport)) + goto out; + + hdr = data; + + riocm_debug(RX_CMD, "OP=%x for ch=%d from %d", + hdr->ch_op, ntohs(hdr->dst_ch), ntohs(hdr->src_ch)); + + switch (hdr->ch_op) { + case CM_CONN_REQ: + riocm_req_handler(cm, data); + break; + case CM_CONN_ACK: + riocm_resp_handler(data); + break; + case CM_CONN_CLOSE: + riocm_close_handler(data); + break; + default: + riocm_error("Invalid packet header"); + break; + } +out: + kfree(data); +} + +/* + * rio_rx_data_handler - received data packet handler + * @cm: cm_dev object + * @buf: data packet + * + * Returns: 0 if success, or + * -ENODEV if cannot find a channel with specified ID, + * -EIO if channel is not in CONNECTED state, + * -ENOMEM if channel RX queue is full (packet discarded) + */ +static int rio_rx_data_handler(struct cm_dev *cm, void *buf) +{ + struct rio_ch_chan_hdr *hdr; + struct rio_channel *ch; + + hdr = buf; + + riocm_debug(RX_DATA, "for ch=%d", ntohs(hdr->dst_ch)); + + ch = riocm_get_channel(ntohs(hdr->dst_ch)); + if (!ch) { + /* Discard data message for non-existing channel */ + kfree(buf); + return -ENODEV; + } + + /* Place pointer to the buffer into channel's RX queue */ + spin_lock(&ch->lock); + + if (ch->state != RIO_CM_CONNECTED) { + /* Channel is not ready to receive data, discard a packet */ + riocm_debug(RX_DATA, "ch=%d is in wrong state=%d", + ch->id, ch->state); + spin_unlock(&ch->lock); + kfree(buf); + riocm_put_channel(ch); + return -EIO; + } + + if (ch->rx_ring.count == RIOCM_RX_RING_SIZE) { + /* If RX ring is full, discard a packet */ + riocm_debug(RX_DATA, "ch=%d is full", ch->id); + spin_unlock(&ch->lock); + kfree(buf); + riocm_put_channel(ch); + return -ENOMEM; + } + + ch->rx_ring.buf[ch->rx_ring.head] = buf; + ch->rx_ring.head++; + ch->rx_ring.count++; + ch->rx_ring.head %= RIOCM_RX_RING_SIZE; + + complete(&ch->comp); + + spin_unlock(&ch->lock); + riocm_put_channel(ch); + + return 0; +} + +/* + * rio_ibmsg_handler - inbound message packet handler + */ +static void rio_ibmsg_handler(struct work_struct *work) +{ + struct cm_dev *cm = container_of(work, struct cm_dev, rx_work); + void *data; + struct rio_ch_chan_hdr *hdr; + + if (!rio_mport_is_running(cm->mport)) + return; + + while (1) { + mutex_lock(&cm->rx_lock); + data = riocm_rx_get_msg(cm); + if (data) + riocm_rx_fill(cm, 1); + mutex_unlock(&cm->rx_lock); + + if (data == NULL) + break; + + hdr = data; + + if (hdr->bhdr.type != RIO_CM_CHAN) { + /* For now simply discard packets other than channel */ + riocm_error("Unsupported TYPE code (0x%x). Msg dropped", + hdr->bhdr.type); + kfree(data); + continue; + } + + /* Process a channel message */ + if (hdr->ch_op == CM_DATA_MSG) + rio_rx_data_handler(cm, data); + else + rio_cm_handler(cm, data); + } +} + +static void riocm_inb_msg_event(struct rio_mport *mport, void *dev_id, + int mbox, int slot) +{ + struct cm_dev *cm = dev_id; + + if (rio_mport_is_running(cm->mport) && !work_pending(&cm->rx_work)) + queue_work(cm->rx_wq, &cm->rx_work); +} + +/* + * rio_txcq_handler - TX completion handler + * @cm: cm_dev object + * @slot: TX queue slot + * + * TX completion handler also ensures that pending request packets are placed + * into transmit queue as soon as a free slot becomes available. This is done + * to give higher priority to request packets during high intensity data flow. + */ +static void rio_txcq_handler(struct cm_dev *cm, int slot) +{ + int ack_slot; + + /* ATTN: Add TX completion notification if/when direct buffer + * transfer is implemented. At this moment only correct tracking + * of tx_count is important. + */ + riocm_debug(TX_EVENT, "for mport_%d slot %d tx_cnt %d", + cm->mport->id, slot, cm->tx_cnt); + + spin_lock(&cm->tx_lock); + ack_slot = cm->tx_ack_slot; + + if (ack_slot == slot) + riocm_debug(TX_EVENT, "slot == ack_slot"); + + while (cm->tx_cnt && ((ack_slot != slot) || + (cm->tx_cnt == RIOCM_TX_RING_SIZE))) { + + cm->tx_buf[ack_slot] = NULL; + ++ack_slot; + ack_slot &= (RIOCM_TX_RING_SIZE - 1); + cm->tx_cnt--; + } + + if (cm->tx_cnt < 0 || cm->tx_cnt > RIOCM_TX_RING_SIZE) + riocm_error("tx_cnt %d out of sync", cm->tx_cnt); + + WARN_ON((cm->tx_cnt < 0) || (cm->tx_cnt > RIOCM_TX_RING_SIZE)); + + cm->tx_ack_slot = ack_slot; + + /* + * If there are pending requests, insert them into transmit queue + */ + if (!list_empty(&cm->tx_reqs) && (cm->tx_cnt < RIOCM_TX_RING_SIZE)) { + struct tx_req *req, *_req; + int rc; + + list_for_each_entry_safe(req, _req, &cm->tx_reqs, node) { + list_del(&req->node); + cm->tx_buf[cm->tx_slot] = req->buffer; + rc = rio_add_outb_message(cm->mport, req->rdev, cmbox, + req->buffer, req->len); + kfree(req->buffer); + kfree(req); + + ++cm->tx_cnt; + ++cm->tx_slot; + cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); + if (cm->tx_cnt == RIOCM_TX_RING_SIZE) + break; + } + } + + spin_unlock(&cm->tx_lock); +} + +static void riocm_outb_msg_event(struct rio_mport *mport, void *dev_id, + int mbox, int slot) +{ + struct cm_dev *cm = dev_id; + + if (cm && rio_mport_is_running(cm->mport)) + rio_txcq_handler(cm, slot); +} + +static int riocm_queue_req(struct cm_dev *cm, struct rio_dev *rdev, + void *buffer, size_t len) +{ + unsigned long flags; + struct tx_req *treq; + + treq = kzalloc(sizeof(*treq), GFP_KERNEL); + if (treq == NULL) + return -ENOMEM; + + treq->rdev = rdev; + treq->buffer = buffer; + treq->len = len; + + spin_lock_irqsave(&cm->tx_lock, flags); + list_add_tail(&treq->node, &cm->tx_reqs); + spin_unlock_irqrestore(&cm->tx_lock, flags); + return 0; +} + +/* + * riocm_post_send - helper function that places packet into msg TX queue + * @cm: cm_dev object + * @rdev: target RapidIO device object (required by outbound msg interface) + * @buffer: pointer to a packet buffer to send + * @len: length of data to transfer + * @req: request priority flag + * + * Returns: 0 if success, or error code otherwise. + */ +static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, + void *buffer, size_t len) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&cm->tx_lock, flags); + + if (cm->mport == NULL) { + rc = -ENODEV; + goto err_out; + } + + if (cm->tx_cnt == RIOCM_TX_RING_SIZE) { + riocm_debug(TX, "Tx Queue is full"); + rc = -EBUSY; + goto err_out; + } + + cm->tx_buf[cm->tx_slot] = buffer; + rc = rio_add_outb_message(cm->mport, rdev, cmbox, buffer, len); + + riocm_debug(TX, "Add buf@%p destid=%x tx_slot=%d tx_cnt=%d", + buffer, rdev->destid, cm->tx_slot, cm->tx_cnt); + + ++cm->tx_cnt; + ++cm->tx_slot; + cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); + +err_out: + spin_unlock_irqrestore(&cm->tx_lock, flags); + return rc; +} + +/* + * riocm_ch_send - sends a data packet to a remote device + * @ch_id: local channel ID + * @buf: pointer to a data buffer to send (including CM header) + * @len: length of data to transfer (including CM header) + * + * ATTN: ASSUMES THAT THE HEADER SPACE IS RESERVED PART OF THE DATA PACKET + * + * Returns: 0 if success, or + * -EINVAL if one or more input parameters is/are not valid, + * -ENODEV if cannot find a channel with specified ID, + * -EAGAIN if a channel is not in CONNECTED state, + * + error codes returned by HW send routine. + */ +static int riocm_ch_send(u16 ch_id, void *buf, int len) +{ + struct rio_channel *ch; + struct rio_ch_chan_hdr *hdr; + int ret; + + if (buf == NULL || ch_id == 0 || len == 0 || len > RIO_MAX_MSG_SIZE) + return -EINVAL; + + ch = riocm_get_channel(ch_id); + if (!ch) { + riocm_error("%s(%d) ch_%d not found", current->comm, + task_pid_nr(current), ch_id); + return -ENODEV; + } + + if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { + ret = -EAGAIN; + goto err_out; + } + + /* + * Fill buffer header section with corresponding channel data + */ + hdr = buf; + + hdr->bhdr.src_id = htonl(ch->loc_destid); + hdr->bhdr.dst_id = htonl(ch->rem_destid); + hdr->bhdr.src_mbox = cmbox; + hdr->bhdr.dst_mbox = cmbox; + hdr->bhdr.type = RIO_CM_CHAN; + hdr->ch_op = CM_DATA_MSG; + hdr->dst_ch = htons(ch->rem_channel); + hdr->src_ch = htons(ch->id); + hdr->msg_len = htons((u16)len); + + /* ATTN: the function call below relies on the fact that underlying + * HW-specific add_outb_message() routine copies TX data into its own + * internal transfer buffer (true for all RIONET compatible mport + * drivers). Must be reviewed if mport driver uses the buffer directly. + */ + + ret = riocm_post_send(ch->cmdev, ch->rdev, buf, len); + if (ret) + riocm_debug(TX, "ch %d send_err=%d", ch->id, ret); +err_out: + riocm_put_channel(ch); + return ret; +} + +static int riocm_ch_free_rxbuf(struct rio_channel *ch, void *buf) +{ + int i, ret = -EINVAL; + + spin_lock_bh(&ch->lock); + + for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { + if (ch->rx_ring.inuse[i] == buf) { + ch->rx_ring.inuse[i] = NULL; + ch->rx_ring.inuse_cnt--; + ret = 0; + break; + } + } + + spin_unlock_bh(&ch->lock); + + if (!ret) + kfree(buf); + + return ret; +} + +/* + * riocm_ch_receive - fetch a data packet received for the specified channel + * @ch: local channel ID + * @buf: pointer to a packet buffer + * @timeout: timeout to wait for incoming packet (in jiffies) + * + * Returns: 0 and valid buffer pointer if success, or NULL pointer and one of: + * -EAGAIN if a channel is not in CONNECTED state, + * -ENOMEM if in-use tracking queue is full, + * -ETIME if wait timeout expired, + * -EINTR if wait was interrupted. + */ +static int riocm_ch_receive(struct rio_channel *ch, void **buf, long timeout) +{ + void *rxmsg = NULL; + int i, ret = 0; + long wret; + + if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { + ret = -EAGAIN; + goto out; + } + + if (ch->rx_ring.inuse_cnt == RIOCM_RX_RING_SIZE) { + /* If we do not have entries to track buffers given to upper + * layer, reject request. + */ + ret = -ENOMEM; + goto out; + } + + wret = wait_for_completion_interruptible_timeout(&ch->comp, timeout); + + riocm_debug(WAIT, "wait on %d returned %ld", ch->id, wret); + + if (!wret) + ret = -ETIME; + else if (wret == -ERESTARTSYS) + ret = -EINTR; + else + ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -ECONNRESET; + + if (ret) + goto out; + + spin_lock_bh(&ch->lock); + + rxmsg = ch->rx_ring.buf[ch->rx_ring.tail]; + ch->rx_ring.buf[ch->rx_ring.tail] = NULL; + ch->rx_ring.count--; + ch->rx_ring.tail++; + ch->rx_ring.tail %= RIOCM_RX_RING_SIZE; + ret = -ENOMEM; + + for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { + if (ch->rx_ring.inuse[i] == NULL) { + ch->rx_ring.inuse[i] = rxmsg; + ch->rx_ring.inuse_cnt++; + ret = 0; + break; + } + } + + if (ret) { + /* We have no entry to store pending message: drop it */ + kfree(rxmsg); + rxmsg = NULL; + } + + spin_unlock_bh(&ch->lock); +out: + *buf = rxmsg; + return ret; +} + +/* + * riocm_ch_connect - sends a connect request to a remote device + * @loc_ch: local channel ID + * @cm: CM device to send connect request + * @peer: target RapidIO device + * @rem_ch: remote channel ID + * + * Returns: 0 if success, or + * -EINVAL if the channel is not in IDLE state, + * -EAGAIN if no connection request available immediately, + * -ETIME if ACK response timeout expired, + * -EINTR if wait for response was interrupted. + */ +static int riocm_ch_connect(u16 loc_ch, struct cm_dev *cm, + struct cm_peer *peer, u16 rem_ch) +{ + struct rio_channel *ch = NULL; + struct rio_ch_chan_hdr *hdr; + int ret; + long wret; + + ch = riocm_get_channel(loc_ch); + if (!ch) + return -ENODEV; + + if (!riocm_cmp_exch(ch, RIO_CM_IDLE, RIO_CM_CONNECT)) { + ret = -EINVAL; + goto conn_done; + } + + ch->cmdev = cm; + ch->rdev = peer->rdev; + ch->context = NULL; + ch->loc_destid = cm->mport->host_deviceid; + ch->rem_channel = rem_ch; + + /* + * Send connect request to the remote RapidIO device + */ + + hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) { + ret = -ENOMEM; + goto conn_done; + } + + hdr->bhdr.src_id = htonl(ch->loc_destid); + hdr->bhdr.dst_id = htonl(peer->rdev->destid); + hdr->bhdr.src_mbox = cmbox; + hdr->bhdr.dst_mbox = cmbox; + hdr->bhdr.type = RIO_CM_CHAN; + hdr->ch_op = CM_CONN_REQ; + hdr->dst_ch = htons(rem_ch); + hdr->src_ch = htons(loc_ch); + + /* ATTN: the function call below relies on the fact that underlying + * HW-specific add_outb_message() routine copies TX data into its + * internal transfer buffer. Must be reviewed if mport driver uses + * this buffer directly. + */ + ret = riocm_post_send(cm, peer->rdev, hdr, sizeof(*hdr)); + + if (ret != -EBUSY) { + kfree(hdr); + } else { + ret = riocm_queue_req(cm, peer->rdev, hdr, sizeof(*hdr)); + if (ret) + kfree(hdr); + } + + if (ret) { + riocm_cmp_exch(ch, RIO_CM_CONNECT, RIO_CM_IDLE); + goto conn_done; + } + + /* Wait for connect response from the remote device */ + wret = wait_for_completion_interruptible_timeout(&ch->comp, + RIOCM_CONNECT_TO * HZ); + riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); + + if (!wret) + ret = -ETIME; + else if (wret == -ERESTARTSYS) + ret = -EINTR; + else + ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -1; + +conn_done: + riocm_put_channel(ch); + return ret; +} + +static int riocm_send_ack(struct rio_channel *ch) +{ + struct rio_ch_chan_hdr *hdr; + int ret; + + hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) + return -ENOMEM; + + hdr->bhdr.src_id = htonl(ch->loc_destid); + hdr->bhdr.dst_id = htonl(ch->rem_destid); + hdr->dst_ch = htons(ch->rem_channel); + hdr->src_ch = htons(ch->id); + hdr->bhdr.src_mbox = cmbox; + hdr->bhdr.dst_mbox = cmbox; + hdr->bhdr.type = RIO_CM_CHAN; + hdr->ch_op = CM_CONN_ACK; + + /* ATTN: the function call below relies on the fact that underlying + * add_outb_message() routine copies TX data into its internal transfer + * buffer. Review if switching to direct buffer version. + */ + ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); + + if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, + ch->rdev, hdr, sizeof(*hdr))) + return 0; + kfree(hdr); + + if (ret) + riocm_error("send ACK to ch_%d on %s failed (ret=%d)", + ch->id, rio_name(ch->rdev), ret); + return ret; +} + +/* + * riocm_ch_accept - accept incoming connection request + * @ch_id: channel ID + * @new_ch_id: local mport device + * @timeout: wait timeout (if 0 non-blocking call, do not wait if connection + * request is not available). + * + * Returns: pointer to new channel struct if success, or error-valued pointer: + * -ENODEV - cannot find specified channel or mport, + * -EINVAL - the channel is not in IDLE state, + * -EAGAIN - no connection request available immediately (timeout=0), + * -ENOMEM - unable to allocate new channel, + * -ETIME - wait timeout expired, + * -EINTR - wait was interrupted. + */ +static struct rio_channel *riocm_ch_accept(u16 ch_id, u16 *new_ch_id, + long timeout) +{ + struct rio_channel *ch = NULL; + struct rio_channel *new_ch = NULL; + struct conn_req *req; + struct cm_peer *peer; + int found = 0; + int err = 0; + long wret; + + ch = riocm_get_channel(ch_id); + if (!ch) + return ERR_PTR(-EINVAL); + + if (!riocm_cmp(ch, RIO_CM_LISTEN)) { + err = -EINVAL; + goto err_put; + } + + /* Don't sleep if this is a non blocking call */ + if (!timeout) { + if (!try_wait_for_completion(&ch->comp)) { + err = -EAGAIN; + goto err_put; + } + } else { + riocm_debug(WAIT, "on %d", ch->id); + + wret = wait_for_completion_interruptible_timeout(&ch->comp, + timeout); + if (!wret) { + err = -ETIME; + goto err_put; + } else if (wret == -ERESTARTSYS) { + err = -EINTR; + goto err_put; + } + } + + spin_lock_bh(&ch->lock); + + if (ch->state != RIO_CM_LISTEN) { + err = -ECANCELED; + } else if (list_empty(&ch->accept_queue)) { + riocm_debug(WAIT, "on %d accept_queue is empty on completion", + ch->id); + err = -EIO; + } + + spin_unlock_bh(&ch->lock); + + if (err) { + riocm_debug(WAIT, "on %d returns %d", ch->id, err); + goto err_put; + } + + /* Create new channel for this connection */ + new_ch = riocm_ch_alloc(RIOCM_CHNUM_AUTO); + + if (IS_ERR(new_ch)) { + riocm_error("failed to get channel for new req (%ld)", + PTR_ERR(new_ch)); + err = -ENOMEM; + goto err_put; + } + + spin_lock_bh(&ch->lock); + + req = list_first_entry(&ch->accept_queue, struct conn_req, node); + list_del(&req->node); + new_ch->cmdev = ch->cmdev; + new_ch->loc_destid = ch->loc_destid; + new_ch->rem_destid = req->destid; + new_ch->rem_channel = req->chan; + + spin_unlock_bh(&ch->lock); + riocm_put_channel(ch); + kfree(req); + + down_read(&rdev_sem); + /* Find requester's device object */ + list_for_each_entry(peer, &new_ch->cmdev->peers, node) { + if (peer->rdev->destid == new_ch->rem_destid) { + riocm_debug(RX_CMD, "found matching device(%s)", + rio_name(peer->rdev)); + found = 1; + break; + } + } + up_read(&rdev_sem); + + if (!found) { + /* If peer device object not found, simply ignore the request */ + err = -ENODEV; + goto err_nodev; + } + + new_ch->rdev = peer->rdev; + new_ch->state = RIO_CM_CONNECTED; + spin_lock_init(&new_ch->lock); + + /* Acknowledge the connection request. */ + riocm_send_ack(new_ch); + + *new_ch_id = new_ch->id; + return new_ch; +err_put: + riocm_put_channel(ch); +err_nodev: + if (new_ch) { + spin_lock_bh(&idr_lock); + idr_remove(&ch_idr, new_ch->id); + spin_unlock_bh(&idr_lock); + riocm_put_channel(new_ch); + } + *new_ch_id = 0; + return ERR_PTR(err); +} + +/* + * riocm_ch_listen - puts a channel into LISTEN state + * @ch_id: channel ID + * + * Returns: 0 if success, or + * -EINVAL if the specified channel does not exists or + * is not in CHAN_BOUND state. + */ +static int riocm_ch_listen(u16 ch_id) +{ + struct rio_channel *ch = NULL; + int ret = 0; + + riocm_debug(CHOP, "(ch_%d)", ch_id); + + ch = riocm_get_channel(ch_id); + if (!ch || !riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN)) + ret = -EINVAL; + riocm_put_channel(ch); + return ret; +} + +/* + * riocm_ch_bind - associate a channel object and an mport device + * @ch_id: channel ID + * @mport_id: local mport device ID + * @context: pointer to the additional caller's context + * + * Returns: 0 if success, or + * -ENODEV if cannot find specified mport, + * -EINVAL if the specified channel does not exist or + * is not in IDLE state. + */ +static int riocm_ch_bind(u16 ch_id, u8 mport_id, void *context) +{ + struct rio_channel *ch = NULL; + struct cm_dev *cm; + int rc = -ENODEV; + + riocm_debug(CHOP, "ch_%d to mport_%d", ch_id, mport_id); + + /* Find matching cm_dev object */ + down_read(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if ((cm->mport->id == mport_id) && + rio_mport_is_running(cm->mport)) { + rc = 0; + break; + } + } + + if (rc) + goto exit; + + ch = riocm_get_channel(ch_id); + if (!ch) { + rc = -EINVAL; + goto exit; + } + + spin_lock_bh(&ch->lock); + if (ch->state != RIO_CM_IDLE) { + spin_unlock_bh(&ch->lock); + rc = -EINVAL; + goto err_put; + } + + ch->cmdev = cm; + ch->loc_destid = cm->mport->host_deviceid; + ch->context = context; + ch->state = RIO_CM_CHAN_BOUND; + spin_unlock_bh(&ch->lock); +err_put: + riocm_put_channel(ch); +exit: + up_read(&rdev_sem); + return rc; +} + +/* + * riocm_ch_alloc - channel object allocation helper routine + * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) + * + * Return value: pointer to newly created channel object, + * or error-valued pointer + */ +static struct rio_channel *riocm_ch_alloc(u16 ch_num) +{ + int id; + int start, end; + struct rio_channel *ch; + + ch = kzalloc(sizeof(*ch), GFP_KERNEL); + if (!ch) + return ERR_PTR(-ENOMEM); + + if (ch_num) { + /* If requested, try to obtain the specified channel ID */ + start = ch_num; + end = ch_num + 1; + } else { + /* Obtain channel ID from the dynamic allocation range */ + start = chstart; + end = RIOCM_MAX_CHNUM + 1; + } + + idr_preload(GFP_KERNEL); + spin_lock_bh(&idr_lock); + id = idr_alloc_cyclic(&ch_idr, ch, start, end, GFP_NOWAIT); + spin_unlock_bh(&idr_lock); + idr_preload_end(); + + if (id < 0) { + kfree(ch); + return ERR_PTR(id == -ENOSPC ? -EBUSY : id); + } + + ch->id = (u16)id; + ch->state = RIO_CM_IDLE; + spin_lock_init(&ch->lock); + INIT_LIST_HEAD(&ch->accept_queue); + INIT_LIST_HEAD(&ch->ch_node); + init_completion(&ch->comp); + init_completion(&ch->comp_close); + kref_init(&ch->ref); + ch->rx_ring.head = 0; + ch->rx_ring.tail = 0; + ch->rx_ring.count = 0; + ch->rx_ring.inuse_cnt = 0; + + return ch; +} + +/* + * riocm_ch_create - creates a new channel object and allocates ID for it + * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) + * + * Allocates and initializes a new channel object. If the parameter ch_num > 0 + * and is within the valid range, riocm_ch_create tries to allocate the + * specified ID for the new channel. If ch_num = 0, channel ID will be assigned + * automatically from the range (chstart ... RIOCM_MAX_CHNUM). + * Module parameter 'chstart' defines start of an ID range available for dynamic + * allocation. Range below 'chstart' is reserved for pre-defined ID numbers. + * Available channel numbers are limited by 16-bit size of channel numbers used + * in the packet header. + * + * Return value: PTR to rio_channel structure if successful (with channel number + * updated via pointer) or error-valued pointer if error. + */ +static struct rio_channel *riocm_ch_create(u16 *ch_num) +{ + struct rio_channel *ch = NULL; + + ch = riocm_ch_alloc(*ch_num); + + if (IS_ERR(ch)) + riocm_debug(CHOP, "Failed to allocate channel %d (err=%ld)", + *ch_num, PTR_ERR(ch)); + else + *ch_num = ch->id; + + return ch; +} + +/* + * riocm_ch_free - channel object release routine + * @ref: pointer to a channel's kref structure + */ +static void riocm_ch_free(struct kref *ref) +{ + struct rio_channel *ch = container_of(ref, struct rio_channel, ref); + int i; + + riocm_debug(CHOP, "(ch_%d)", ch->id); + + if (ch->rx_ring.inuse_cnt) { + for (i = 0; + i < RIOCM_RX_RING_SIZE && ch->rx_ring.inuse_cnt; i++) { + if (ch->rx_ring.inuse[i] != NULL) { + kfree(ch->rx_ring.inuse[i]); + ch->rx_ring.inuse_cnt--; + } + } + } + + if (ch->rx_ring.count) + for (i = 0; i < RIOCM_RX_RING_SIZE && ch->rx_ring.count; i++) { + if (ch->rx_ring.buf[i] != NULL) { + kfree(ch->rx_ring.buf[i]); + ch->rx_ring.count--; + } + } + + complete(&ch->comp_close); +} + +static int riocm_send_close(struct rio_channel *ch) +{ + struct rio_ch_chan_hdr *hdr; + int ret; + + /* + * Send CH_CLOSE notification to the remote RapidIO device + */ + + hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) + return -ENOMEM; + + hdr->bhdr.src_id = htonl(ch->loc_destid); + hdr->bhdr.dst_id = htonl(ch->rem_destid); + hdr->bhdr.src_mbox = cmbox; + hdr->bhdr.dst_mbox = cmbox; + hdr->bhdr.type = RIO_CM_CHAN; + hdr->ch_op = CM_CONN_CLOSE; + hdr->dst_ch = htons(ch->rem_channel); + hdr->src_ch = htons(ch->id); + + /* ATTN: the function call below relies on the fact that underlying + * add_outb_message() routine copies TX data into its internal transfer + * buffer. Needs to be reviewed if switched to direct buffer mode. + */ + ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); + + if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, ch->rdev, + hdr, sizeof(*hdr))) + return 0; + kfree(hdr); + + if (ret) + riocm_error("ch(%d) send CLOSE failed (ret=%d)", ch->id, ret); + + return ret; +} + +/* + * riocm_ch_close - closes a channel object with specified ID (by local request) + * @ch: channel to be closed + */ +static int riocm_ch_close(struct rio_channel *ch) +{ + unsigned long tmo = msecs_to_jiffies(3000); + enum rio_cm_state state; + long wret; + int ret = 0; + + riocm_debug(CHOP, "ch_%d by %s(%d)", + ch->id, current->comm, task_pid_nr(current)); + + state = riocm_exch(ch, RIO_CM_DESTROYING); + if (state == RIO_CM_CONNECTED) + riocm_send_close(ch); + + complete_all(&ch->comp); + + riocm_put_channel(ch); + wret = wait_for_completion_interruptible_timeout(&ch->comp_close, tmo); + + riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); + + if (wret == 0) { + /* Timeout on wait occurred */ + riocm_debug(CHOP, "%s(%d) timed out waiting for ch %d", + current->comm, task_pid_nr(current), ch->id); + ret = -ETIMEDOUT; + } else if (wret == -ERESTARTSYS) { + /* Wait_for_completion was interrupted by a signal */ + riocm_debug(CHOP, "%s(%d) wait for ch %d was interrupted", + current->comm, task_pid_nr(current), ch->id); + ret = -EINTR; + } + + if (!ret) { + riocm_debug(CHOP, "ch_%d resources released", ch->id); + kfree(ch); + } else { + riocm_debug(CHOP, "failed to release ch_%d resources", ch->id); + } + + return ret; +} + +/* + * riocm_cdev_open() - Open character device + */ +static int riocm_cdev_open(struct inode *inode, struct file *filp) +{ + riocm_debug(INIT, "by %s(%d) filp=%p ", + current->comm, task_pid_nr(current), filp); + + if (list_empty(&cm_dev_list)) + return -ENODEV; + + return 0; +} + +/* + * riocm_cdev_release() - Release character device + */ +static int riocm_cdev_release(struct inode *inode, struct file *filp) +{ + struct rio_channel *ch, *_c; + unsigned int i; + LIST_HEAD(list); + + riocm_debug(EXIT, "by %s(%d) filp=%p", + current->comm, task_pid_nr(current), filp); + + /* Check if there are channels associated with this file descriptor */ + spin_lock_bh(&idr_lock); + idr_for_each_entry(&ch_idr, ch, i) { + if (ch && ch->filp == filp) { + riocm_debug(EXIT, "ch_%d not released by %s(%d)", + ch->id, current->comm, + task_pid_nr(current)); + idr_remove(&ch_idr, ch->id); + list_add(&ch->ch_node, &list); + } + } + spin_unlock_bh(&idr_lock); + + if (!list_empty(&list)) { + list_for_each_entry_safe(ch, _c, &list, ch_node) { + list_del(&ch->ch_node); + riocm_ch_close(ch); + } + } + + return 0; +} + +/* + * cm_ep_get_list_size() - Reports number of endpoints in the network + */ +static int cm_ep_get_list_size(void __user *arg) +{ + u32 __user *p = arg; + u32 mport_id; + u32 count = 0; + struct cm_dev *cm; + + if (get_user(mport_id, p)) + return -EFAULT; + if (mport_id >= RIO_MAX_MPORTS) + return -EINVAL; + + /* Find a matching cm_dev object */ + down_read(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if (cm->mport->id == mport_id) { + count = cm->npeers; + up_read(&rdev_sem); + if (copy_to_user(arg, &count, sizeof(u32))) + return -EFAULT; + return 0; + } + } + up_read(&rdev_sem); + + return -ENODEV; +} + +/* + * cm_ep_get_list() - Returns list of attached endpoints + */ +static int cm_ep_get_list(void __user *arg) +{ + struct cm_dev *cm; + struct cm_peer *peer; + u32 info[2]; + void *buf; + u32 nent; + u32 *entry_ptr; + u32 i = 0; + int ret = 0; + + if (copy_from_user(&info, arg, sizeof(info))) + return -EFAULT; + + if (info[1] >= RIO_MAX_MPORTS || info[0] > RIOCM_MAX_EP_COUNT) + return -EINVAL; + + /* Find a matching cm_dev object */ + down_read(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) + if (cm->mport->id == (u8)info[1]) + goto found; + + up_read(&rdev_sem); + return -ENODEV; + +found: + nent = min(info[0], cm->npeers); + buf = kcalloc(nent + 2, sizeof(u32), GFP_KERNEL); + if (!buf) { + up_read(&rdev_sem); + return -ENOMEM; + } + + entry_ptr = (u32 *)((uintptr_t)buf + 2*sizeof(u32)); + + list_for_each_entry(peer, &cm->peers, node) { + *entry_ptr = (u32)peer->rdev->destid; + entry_ptr++; + if (++i == nent) + break; + } + up_read(&rdev_sem); + + ((u32 *)buf)[0] = i; /* report an updated number of entries */ + ((u32 *)buf)[1] = info[1]; /* put back an mport ID */ + if (copy_to_user(arg, buf, sizeof(u32) * (info[0] + 2))) + ret = -EFAULT; + + kfree(buf); + return ret; +} + +/* + * cm_mport_get_list() - Returns list of available local mport devices + */ +static int cm_mport_get_list(void __user *arg) +{ + int ret = 0; + u32 entries; + void *buf; + struct cm_dev *cm; + u32 *entry_ptr; + int count = 0; + + if (copy_from_user(&entries, arg, sizeof(entries))) + return -EFAULT; + if (entries == 0 || entries > RIO_MAX_MPORTS) + return -EINVAL; + buf = kcalloc(entries + 1, sizeof(u32), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Scan all registered cm_dev objects */ + entry_ptr = (u32 *)((uintptr_t)buf + sizeof(u32)); + down_read(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if (count++ < entries) { + *entry_ptr = (cm->mport->id << 16) | + cm->mport->host_deviceid; + entry_ptr++; + } + } + up_read(&rdev_sem); + + *((u32 *)buf) = count; /* report a real number of entries */ + if (copy_to_user(arg, buf, sizeof(u32) * (count + 1))) + ret = -EFAULT; + + kfree(buf); + return ret; +} + +/* + * cm_chan_create() - Create a message exchange channel + */ +static int cm_chan_create(struct file *filp, void __user *arg) +{ + u16 __user *p = arg; + u16 ch_num; + struct rio_channel *ch; + + if (get_user(ch_num, p)) + return -EFAULT; + + riocm_debug(CHOP, "ch_%d requested by %s(%d)", + ch_num, current->comm, task_pid_nr(current)); + ch = riocm_ch_create(&ch_num); + if (IS_ERR(ch)) + return PTR_ERR(ch); + + ch->filp = filp; + riocm_debug(CHOP, "ch_%d created by %s(%d)", + ch_num, current->comm, task_pid_nr(current)); + return put_user(ch_num, p); +} + +/* + * cm_chan_close() - Close channel + * @filp: Pointer to file object + * @arg: Channel to close + */ +static int cm_chan_close(struct file *filp, void __user *arg) +{ + u16 __user *p = arg; + u16 ch_num; + struct rio_channel *ch; + + if (get_user(ch_num, p)) + return -EFAULT; + + riocm_debug(CHOP, "ch_%d by %s(%d)", + ch_num, current->comm, task_pid_nr(current)); + + spin_lock_bh(&idr_lock); + ch = idr_find(&ch_idr, ch_num); + if (!ch) { + spin_unlock_bh(&idr_lock); + return 0; + } + if (ch->filp != filp) { + spin_unlock_bh(&idr_lock); + return -EINVAL; + } + idr_remove(&ch_idr, ch->id); + spin_unlock_bh(&idr_lock); + + return riocm_ch_close(ch); +} + +/* + * cm_chan_bind() - Bind channel + * @arg: Channel number + */ +static int cm_chan_bind(void __user *arg) +{ + struct rio_cm_channel chan; + + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + if (chan.mport_id >= RIO_MAX_MPORTS) + return -EINVAL; + + return riocm_ch_bind(chan.id, chan.mport_id, NULL); +} + +/* + * cm_chan_listen() - Listen on channel + * @arg: Channel number + */ +static int cm_chan_listen(void __user *arg) +{ + u16 __user *p = arg; + u16 ch_num; + + if (get_user(ch_num, p)) + return -EFAULT; + + return riocm_ch_listen(ch_num); +} + +/* + * cm_chan_accept() - Accept incoming connection + * @filp: Pointer to file object + * @arg: Channel number + */ +static int cm_chan_accept(struct file *filp, void __user *arg) +{ + struct rio_cm_accept param; + long accept_to; + struct rio_channel *ch; + + if (copy_from_user(¶m, arg, sizeof(param))) + return -EFAULT; + + riocm_debug(CHOP, "on ch_%d by %s(%d)", + param.ch_num, current->comm, task_pid_nr(current)); + + accept_to = param.wait_to ? + msecs_to_jiffies(param.wait_to) : 0; + + ch = riocm_ch_accept(param.ch_num, ¶m.ch_num, accept_to); + if (IS_ERR(ch)) + return PTR_ERR(ch); + ch->filp = filp; + + riocm_debug(CHOP, "new ch_%d for %s(%d)", + ch->id, current->comm, task_pid_nr(current)); + + if (copy_to_user(arg, ¶m, sizeof(param))) + return -EFAULT; + return 0; +} + +/* + * cm_chan_connect() - Connect on channel + * @arg: Channel information + */ +static int cm_chan_connect(void __user *arg) +{ + struct rio_cm_channel chan; + struct cm_dev *cm; + struct cm_peer *peer; + int ret = -ENODEV; + + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + if (chan.mport_id >= RIO_MAX_MPORTS) + return -EINVAL; + + down_read(&rdev_sem); + + /* Find matching cm_dev object */ + list_for_each_entry(cm, &cm_dev_list, list) { + if (cm->mport->id == chan.mport_id) { + ret = 0; + break; + } + } + + if (ret) + goto err_out; + + if (chan.remote_destid >= RIO_ANY_DESTID(cm->mport->sys_size)) { + ret = -EINVAL; + goto err_out; + } + + /* Find corresponding RapidIO endpoint device object */ + ret = -ENODEV; + + list_for_each_entry(peer, &cm->peers, node) { + if (peer->rdev->destid == chan.remote_destid) { + ret = 0; + break; + } + } + + if (ret) + goto err_out; + + up_read(&rdev_sem); + + return riocm_ch_connect(chan.id, cm, peer, chan.remote_channel); +err_out: + up_read(&rdev_sem); + return ret; +} + +/* + * cm_chan_msg_send() - Send a message through channel + * @arg: Outbound message information + */ +static int cm_chan_msg_send(void __user *arg) +{ + struct rio_cm_msg msg; + void *buf; + int ret = 0; + + if (copy_from_user(&msg, arg, sizeof(msg))) + return -EFAULT; + if (msg.size > RIO_MAX_MSG_SIZE) + return -EINVAL; + + buf = kmalloc(msg.size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, (void __user *)(uintptr_t)msg.msg, msg.size)) { + ret = -EFAULT; + goto out; + } + + ret = riocm_ch_send(msg.ch_num, buf, msg.size); +out: + kfree(buf); + return ret; +} + +/* + * cm_chan_msg_rcv() - Receive a message through channel + * @arg: Inbound message information + */ +static int cm_chan_msg_rcv(void __user *arg) +{ + struct rio_cm_msg msg; + struct rio_channel *ch; + void *buf; + long rxto; + int ret = 0, msg_size; + + if (copy_from_user(&msg, arg, sizeof(msg))) + return -EFAULT; + + if (msg.ch_num == 0 || msg.size == 0) + return -EINVAL; + + ch = riocm_get_channel(msg.ch_num); + if (!ch) + return -ENODEV; + + rxto = msg.rxto ? msecs_to_jiffies(msg.rxto) : MAX_SCHEDULE_TIMEOUT; + + ret = riocm_ch_receive(ch, &buf, rxto); + if (ret) + goto out; + + msg_size = min(msg.size, (u16)(RIO_MAX_MSG_SIZE)); + + if (copy_to_user((void __user *)(uintptr_t)msg.msg, buf, msg_size)) + ret = -EFAULT; + + riocm_ch_free_rxbuf(ch, buf); +out: + riocm_put_channel(ch); + return ret; +} + +/* + * riocm_cdev_ioctl() - IOCTL requests handler + */ +static long +riocm_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case RIO_CM_EP_GET_LIST_SIZE: + return cm_ep_get_list_size((void __user *)arg); + case RIO_CM_EP_GET_LIST: + return cm_ep_get_list((void __user *)arg); + case RIO_CM_CHAN_CREATE: + return cm_chan_create(filp, (void __user *)arg); + case RIO_CM_CHAN_CLOSE: + return cm_chan_close(filp, (void __user *)arg); + case RIO_CM_CHAN_BIND: + return cm_chan_bind((void __user *)arg); + case RIO_CM_CHAN_LISTEN: + return cm_chan_listen((void __user *)arg); + case RIO_CM_CHAN_ACCEPT: + return cm_chan_accept(filp, (void __user *)arg); + case RIO_CM_CHAN_CONNECT: + return cm_chan_connect((void __user *)arg); + case RIO_CM_CHAN_SEND: + return cm_chan_msg_send((void __user *)arg); + case RIO_CM_CHAN_RECEIVE: + return cm_chan_msg_rcv((void __user *)arg); + case RIO_CM_MPORT_GET_LIST: + return cm_mport_get_list((void __user *)arg); + default: + break; + } + + return -EINVAL; +} + +static const struct file_operations riocm_cdev_fops = { + .owner = THIS_MODULE, + .open = riocm_cdev_open, + .release = riocm_cdev_release, + .unlocked_ioctl = riocm_cdev_ioctl, +}; + +/* + * riocm_add_dev - add new remote RapidIO device into channel management core + * @dev: device object associated with RapidIO device + * @sif: subsystem interface + * + * Adds the specified RapidIO device (if applicable) into peers list of + * the corresponding channel management device (cm_dev). + */ +static int riocm_add_dev(struct device *dev, struct subsys_interface *sif) +{ + struct cm_peer *peer; + struct rio_dev *rdev = to_rio_dev(dev); + struct cm_dev *cm; + + /* Check if the remote device has capabilities required to support CM */ + if (!dev_cm_capable(rdev)) + return 0; + + riocm_debug(RDEV, "(%s)", rio_name(rdev)); + + peer = kmalloc(sizeof(*peer), GFP_KERNEL); + if (!peer) + return -ENOMEM; + + /* Find a corresponding cm_dev object */ + down_write(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if (cm->mport == rdev->net->hport) + goto found; + } + + up_write(&rdev_sem); + kfree(peer); + return -ENODEV; + +found: + peer->rdev = rdev; + list_add_tail(&peer->node, &cm->peers); + cm->npeers++; + + up_write(&rdev_sem); + return 0; +} + +/* + * riocm_remove_dev - remove remote RapidIO device from channel management core + * @dev: device object associated with RapidIO device + * @sif: subsystem interface + * + * Removes the specified RapidIO device (if applicable) from peers list of + * the corresponding channel management device (cm_dev). + */ +static void riocm_remove_dev(struct device *dev, struct subsys_interface *sif) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct cm_dev *cm; + struct cm_peer *peer; + struct rio_channel *ch, *_c; + unsigned int i; + bool found = false; + LIST_HEAD(list); + + /* Check if the remote device has capabilities required to support CM */ + if (!dev_cm_capable(rdev)) + return; + + riocm_debug(RDEV, "(%s)", rio_name(rdev)); + + /* Find matching cm_dev object */ + down_write(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if (cm->mport == rdev->net->hport) { + found = true; + break; + } + } + + if (!found) { + up_write(&rdev_sem); + return; + } + + /* Remove remote device from the list of peers */ + found = false; + list_for_each_entry(peer, &cm->peers, node) { + if (peer->rdev == rdev) { + riocm_debug(RDEV, "removing peer %s", rio_name(rdev)); + found = true; + list_del(&peer->node); + cm->npeers--; + kfree(peer); + break; + } + } + + up_write(&rdev_sem); + + if (!found) + return; + + /* + * Release channels associated with this peer + */ + + spin_lock_bh(&idr_lock); + idr_for_each_entry(&ch_idr, ch, i) { + if (ch && ch->rdev == rdev) { + if (atomic_read(&rdev->state) != RIO_DEVICE_SHUTDOWN) + riocm_exch(ch, RIO_CM_DISCONNECT); + idr_remove(&ch_idr, ch->id); + list_add(&ch->ch_node, &list); + } + } + spin_unlock_bh(&idr_lock); + + if (!list_empty(&list)) { + list_for_each_entry_safe(ch, _c, &list, ch_node) { + list_del(&ch->ch_node); + riocm_ch_close(ch); + } + } +} + +/* + * riocm_cdev_add() - Create rio_cm char device + * @devno: device number assigned to device (MAJ + MIN) + */ +static int riocm_cdev_add(dev_t devno) +{ + int ret; + + cdev_init(&riocm_cdev.cdev, &riocm_cdev_fops); + riocm_cdev.cdev.owner = THIS_MODULE; + ret = cdev_add(&riocm_cdev.cdev, devno, 1); + if (ret < 0) { + riocm_error("Cannot register a device with error %d", ret); + return ret; + } + + riocm_cdev.dev = device_create(dev_class, NULL, devno, NULL, DEV_NAME); + if (IS_ERR(riocm_cdev.dev)) { + cdev_del(&riocm_cdev.cdev); + return PTR_ERR(riocm_cdev.dev); + } + + riocm_debug(MPORT, "Added %s cdev(%d:%d)", + DEV_NAME, MAJOR(devno), MINOR(devno)); + + return 0; +} + +/* + * riocm_add_mport - add new local mport device into channel management core + * @dev: device object associated with mport + * @class_intf: class interface + * + * When a new mport device is added, CM immediately reserves inbound and + * outbound RapidIO mailboxes that will be used. + */ +static int riocm_add_mport(struct device *dev, + struct class_interface *class_intf) +{ + int rc; + int i; + struct cm_dev *cm; + struct rio_mport *mport = to_rio_mport(dev); + + riocm_debug(MPORT, "add mport %s", mport->name); + + cm = kzalloc(sizeof(*cm), GFP_KERNEL); + if (!cm) + return -ENOMEM; + + cm->mport = mport; + + rc = rio_request_outb_mbox(mport, cm, cmbox, + RIOCM_TX_RING_SIZE, riocm_outb_msg_event); + if (rc) { + riocm_error("failed to allocate OBMBOX_%d on %s", + cmbox, mport->name); + kfree(cm); + return -ENODEV; + } + + rc = rio_request_inb_mbox(mport, cm, cmbox, + RIOCM_RX_RING_SIZE, riocm_inb_msg_event); + if (rc) { + riocm_error("failed to allocate IBMBOX_%d on %s", + cmbox, mport->name); + rio_release_outb_mbox(mport, cmbox); + kfree(cm); + return -ENODEV; + } + + /* + * Allocate and register inbound messaging buffers to be ready + * to receive channel and system management requests + */ + for (i = 0; i < RIOCM_RX_RING_SIZE; i++) + cm->rx_buf[i] = NULL; + + cm->rx_slots = RIOCM_RX_RING_SIZE; + mutex_init(&cm->rx_lock); + riocm_rx_fill(cm, RIOCM_RX_RING_SIZE); + cm->rx_wq = create_workqueue(DRV_NAME "/rxq"); + INIT_WORK(&cm->rx_work, rio_ibmsg_handler); + + cm->tx_slot = 0; + cm->tx_cnt = 0; + cm->tx_ack_slot = 0; + spin_lock_init(&cm->tx_lock); + + INIT_LIST_HEAD(&cm->peers); + cm->npeers = 0; + INIT_LIST_HEAD(&cm->tx_reqs); + + down_write(&rdev_sem); + list_add_tail(&cm->list, &cm_dev_list); + up_write(&rdev_sem); + + return 0; +} + +/* + * riocm_remove_mport - remove local mport device from channel management core + * @dev: device object associated with mport + * @class_intf: class interface + * + * Removes a local mport device from the list of registered devices that provide + * channel management services. Returns an error if the specified mport is not + * registered with the CM core. + */ +static void riocm_remove_mport(struct device *dev, + struct class_interface *class_intf) +{ + struct rio_mport *mport = to_rio_mport(dev); + struct cm_dev *cm; + struct cm_peer *peer, *temp; + struct rio_channel *ch, *_c; + unsigned int i; + bool found = false; + LIST_HEAD(list); + + riocm_debug(MPORT, "%s", mport->name); + + /* Find a matching cm_dev object */ + down_write(&rdev_sem); + list_for_each_entry(cm, &cm_dev_list, list) { + if (cm->mport == mport) { + list_del(&cm->list); + found = true; + break; + } + } + up_write(&rdev_sem); + if (!found) + return; + + flush_workqueue(cm->rx_wq); + destroy_workqueue(cm->rx_wq); + + /* Release channels bound to this mport */ + spin_lock_bh(&idr_lock); + idr_for_each_entry(&ch_idr, ch, i) { + if (ch->cmdev == cm) { + riocm_debug(RDEV, "%s drop ch_%d", + mport->name, ch->id); + idr_remove(&ch_idr, ch->id); + list_add(&ch->ch_node, &list); + } + } + spin_unlock_bh(&idr_lock); + + if (!list_empty(&list)) { + list_for_each_entry_safe(ch, _c, &list, ch_node) { + list_del(&ch->ch_node); + riocm_ch_close(ch); + } + } + + rio_release_inb_mbox(mport, cmbox); + rio_release_outb_mbox(mport, cmbox); + + /* Remove and free peer entries */ + if (!list_empty(&cm->peers)) + riocm_debug(RDEV, "ATTN: peer list not empty"); + list_for_each_entry_safe(peer, temp, &cm->peers, node) { + riocm_debug(RDEV, "removing peer %s", rio_name(peer->rdev)); + list_del(&peer->node); + kfree(peer); + } + + riocm_rx_free(cm); + kfree(cm); + riocm_debug(MPORT, "%s done", mport->name); +} + +static int rio_cm_shutdown(struct notifier_block *nb, unsigned long code, + void *unused) +{ + struct rio_channel *ch; + unsigned int i; + + riocm_debug(EXIT, "."); + + spin_lock_bh(&idr_lock); + idr_for_each_entry(&ch_idr, ch, i) { + riocm_debug(EXIT, "close ch %d", ch->id); + if (ch->state == RIO_CM_CONNECTED) + riocm_send_close(ch); + } + spin_unlock_bh(&idr_lock); + + return NOTIFY_DONE; +} + +/* + * riocm_interface handles addition/removal of remote RapidIO devices + */ +static struct subsys_interface riocm_interface = { + .name = "rio_cm", + .subsys = &rio_bus_type, + .add_dev = riocm_add_dev, + .remove_dev = riocm_remove_dev, +}; + +/* + * rio_mport_interface handles addition/removal local mport devices + */ +static struct class_interface rio_mport_interface __refdata = { + .class = &rio_mport_class, + .add_dev = riocm_add_mport, + .remove_dev = riocm_remove_mport, +}; + +static struct notifier_block rio_cm_notifier = { + .notifier_call = rio_cm_shutdown, +}; + +static int __init riocm_init(void) +{ + int ret; + + /* Create device class needed by udev */ + dev_class = class_create(THIS_MODULE, DRV_NAME); + if (IS_ERR(dev_class)) { + riocm_error("Cannot create " DRV_NAME " class"); + return PTR_ERR(dev_class); + } + + ret = alloc_chrdev_region(&dev_number, 0, 1, DRV_NAME); + if (ret) { + class_destroy(dev_class); + return ret; + } + + dev_major = MAJOR(dev_number); + dev_minor_base = MINOR(dev_number); + riocm_debug(INIT, "Registered class with %d major", dev_major); + + /* + * Register as rapidio_port class interface to get notifications about + * mport additions and removals. + */ + ret = class_interface_register(&rio_mport_interface); + if (ret) { + riocm_error("class_interface_register error: %d", ret); + goto err_reg; + } + + /* + * Register as RapidIO bus interface to get notifications about + * addition/removal of remote RapidIO devices. + */ + ret = subsys_interface_register(&riocm_interface); + if (ret) { + riocm_error("subsys_interface_register error: %d", ret); + goto err_cl; + } + + ret = register_reboot_notifier(&rio_cm_notifier); + if (ret) { + riocm_error("failed to register reboot notifier (err=%d)", ret); + goto err_sif; + } + + ret = riocm_cdev_add(dev_number); + if (ret) { + unregister_reboot_notifier(&rio_cm_notifier); + ret = -ENODEV; + goto err_sif; + } + + return 0; +err_sif: + subsys_interface_unregister(&riocm_interface); +err_cl: + class_interface_unregister(&rio_mport_interface); +err_reg: + unregister_chrdev_region(dev_number, 1); + class_destroy(dev_class); + return ret; +} + +static void __exit riocm_exit(void) +{ + riocm_debug(EXIT, "enter"); + unregister_reboot_notifier(&rio_cm_notifier); + subsys_interface_unregister(&riocm_interface); + class_interface_unregister(&rio_mport_interface); + idr_destroy(&ch_idr); + + device_unregister(riocm_cdev.dev); + cdev_del(&(riocm_cdev.cdev)); + + class_destroy(dev_class); + unregister_chrdev_region(dev_number, 1); +} + +late_initcall(riocm_init); +module_exit(riocm_exit); diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig index 345841562f95..92767fd3b541 100644 --- a/drivers/rapidio/switches/Kconfig +++ b/drivers/rapidio/switches/Kconfig @@ -22,3 +22,9 @@ config RAPIDIO_CPS_GEN2 default n ---help--- Includes support for ITD CPS Gen.2 serial RapidIO switches. + +config RAPIDIO_RXS_GEN3 + tristate "IDT RXS Gen.3 SRIO switch support" + default n + ---help--- + Includes support for ITD RXS Gen.3 serial RapidIO switches. diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile index 051cc6b38188..6bdd54c4e733 100644 --- a/drivers/rapidio/switches/Makefile +++ b/drivers/rapidio/switches/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o +obj-$(CONFIG_RAPIDIO_RXS_GEN3) += idt_gen3.o diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c index 9f7fe21580bb..e67b923b1ca6 100644 --- a/drivers/rapidio/switches/idt_gen2.c +++ b/drivers/rapidio/switches/idt_gen2.c @@ -436,10 +436,11 @@ static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); } + spin_unlock(&rdev->rswitch->lock); + /* Create device-specific sysfs attributes */ idtg2_sysfs(rdev, true); - spin_unlock(&rdev->rswitch->lock); return 0; } @@ -452,11 +453,9 @@ static void idtg2_remove(struct rio_dev *rdev) return; } rdev->rswitch->ops = NULL; - + spin_unlock(&rdev->rswitch->lock); /* Remove device-specific sysfs attributes */ idtg2_sysfs(rdev, false); - - spin_unlock(&rdev->rswitch->lock); } static struct rio_device_id idtg2_id_table[] = { diff --git a/drivers/rapidio/switches/idt_gen3.c b/drivers/rapidio/switches/idt_gen3.c new file mode 100644 index 000000000000..c5923a547bed --- /dev/null +++ b/drivers/rapidio/switches/idt_gen3.c @@ -0,0 +1,382 @@ +/* + * IDT RXS Gen.3 Serial RapidIO switch family support + * + * Copyright 2016 Integrated Device Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/rio_ids.h> +#include <linux/delay.h> + +#include <asm/page.h> +#include "../rio.h" + +#define RIO_EM_PW_STAT 0x40020 +#define RIO_PW_CTL 0x40204 +#define RIO_PW_CTL_PW_TMR 0xffffff00 +#define RIO_PW_ROUTE 0x40208 + +#define RIO_EM_DEV_INT_EN 0x40030 + +#define RIO_PLM_SPx_IMP_SPEC_CTL(x) (0x10100 + (x)*0x100) +#define RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST 0x02000000 + +#define RIO_PLM_SPx_PW_EN(x) (0x10118 + (x)*0x100) +#define RIO_PLM_SPx_PW_EN_OK2U 0x40000000 +#define RIO_PLM_SPx_PW_EN_LINIT 0x10000000 + +#define RIO_BC_L2_Gn_ENTRYx_CSR(n, x) (0x31000 + (n)*0x400 + (x)*0x4) +#define RIO_SPx_L2_Gn_ENTRYy_CSR(x, n, y) \ + (0x51000 + (x)*0x2000 + (n)*0x400 + (y)*0x4) + +static int +idtg3_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port) +{ + u32 rval; + u32 entry = route_port; + int err = 0; + + pr_debug("RIO: %s t=0x%x did_%x to p_%x\n", + __func__, table, route_destid, entry); + + if (route_destid > 0xFF) + return -EINVAL; + + if (route_port == RIO_INVALID_ROUTE) + entry = RIO_RT_ENTRY_DROP_PKT; + + if (table == RIO_GLOBAL_TABLE) { + /* Use broadcast register to update all per-port tables */ + err = rio_mport_write_config_32(mport, destid, hopcount, + RIO_BC_L2_Gn_ENTRYx_CSR(0, route_destid), + entry); + return err; + } + + /* + * Verify that specified port/table number is valid + */ + err = rio_mport_read_config_32(mport, destid, hopcount, + RIO_SWP_INFO_CAR, &rval); + if (err) + return err; + + if (table >= RIO_GET_TOTAL_PORTS(rval)) + return -EINVAL; + + err = rio_mport_write_config_32(mport, destid, hopcount, + RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid), + entry); + return err; +} + +static int +idtg3_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port) +{ + u32 rval; + int err; + + if (route_destid > 0xFF) + return -EINVAL; + + err = rio_mport_read_config_32(mport, destid, hopcount, + RIO_SWP_INFO_CAR, &rval); + if (err) + return err; + + /* + * This switch device does not have the dedicated global routing table. + * It is substituted by reading routing table of the ingress port of + * maintenance read requests. + */ + if (table == RIO_GLOBAL_TABLE) + table = RIO_GET_PORT_NUM(rval); + else if (table >= RIO_GET_TOTAL_PORTS(rval)) + return -EINVAL; + + err = rio_mport_read_config_32(mport, destid, hopcount, + RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid), + &rval); + if (err) + return err; + + if (rval == RIO_RT_ENTRY_DROP_PKT) + *route_port = RIO_INVALID_ROUTE; + else + *route_port = (u8)rval; + + return 0; +} + +static int +idtg3_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table) +{ + u32 i; + u32 rval; + int err; + + if (table == RIO_GLOBAL_TABLE) { + for (i = 0; i <= 0xff; i++) { + err = rio_mport_write_config_32(mport, destid, hopcount, + RIO_BC_L2_Gn_ENTRYx_CSR(0, i), + RIO_RT_ENTRY_DROP_PKT); + if (err) + break; + } + + return err; + } + + err = rio_mport_read_config_32(mport, destid, hopcount, + RIO_SWP_INFO_CAR, &rval); + if (err) + return err; + + if (table >= RIO_GET_TOTAL_PORTS(rval)) + return -EINVAL; + + for (i = 0; i <= 0xff; i++) { + err = rio_mport_write_config_32(mport, destid, hopcount, + RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, i), + RIO_RT_ENTRY_DROP_PKT); + if (err) + break; + } + + return err; +} + +/* + * This routine performs device-specific initialization only. + * All standard EM configuration should be performed at upper level. + */ +static int +idtg3_em_init(struct rio_dev *rdev) +{ + int i, tmp; + u32 rval; + + pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); + + /* Disable assertion of interrupt signal */ + rio_write_config_32(rdev, RIO_EM_DEV_INT_EN, 0); + + /* Disable port-write event notifications during initialization */ + rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, + RIO_EM_PW_TX_CTRL_PW_DIS); + + /* Configure Port-Write notifications for hot-swap events */ + tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); + for (i = 0; i < tmp; i++) { + + rio_read_config_32(rdev, + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, i), + &rval); + if (rval & RIO_PORT_N_ERR_STS_PORT_UA) + continue; + + /* Clear events signaled before enabling notification */ + rio_write_config_32(rdev, + rdev->em_efptr + RIO_EM_PN_ERR_DETECT(i), 0); + + /* Enable event notifications */ + rio_write_config_32(rdev, + rdev->em_efptr + RIO_EM_PN_ERRRATE_EN(i), + RIO_EM_PN_ERRRATE_EN_OK2U | RIO_EM_PN_ERRRATE_EN_U2OK); + /* Enable port-write generation on events */ + rio_write_config_32(rdev, RIO_PLM_SPx_PW_EN(i), + RIO_PLM_SPx_PW_EN_OK2U | RIO_PLM_SPx_PW_EN_LINIT); + + } + + /* Set Port-Write destination port */ + tmp = RIO_GET_PORT_NUM(rdev->swpinfo); + rio_write_config_32(rdev, RIO_PW_ROUTE, 1 << tmp); + + + /* Enable sending port-write event notifications */ + rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0); + + /* set TVAL = ~50us */ + rio_write_config_32(rdev, + rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); + return 0; +} + + +/* + * idtg3_em_handler - device-specific error handler + * + * If the link is down (PORT_UNINIT) does nothing - this is considered + * as link partner removal from the port. + * + * If the link is up (PORT_OK) - situation is handled as *new* device insertion. + * In this case ERR_STOP bits are cleared by issuing soft reset command to the + * reporting port. Inbound and outbound ackIDs are cleared by the reset as well. + * This way the port is synchronized with freshly inserted device (assuming it + * was reset/powered-up on insertion). + * + * TODO: This is not sufficient in a situation when a link between two devices + * was down and up again (e.g. cable disconnect). For that situation full ackID + * realignment process has to be implemented. + */ +static int +idtg3_em_handler(struct rio_dev *rdev, u8 pnum) +{ + u32 err_status; + u32 rval; + + rio_read_config_32(rdev, + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), + &err_status); + + /* Do nothing for device/link removal */ + if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) + return 0; + + /* When link is OK we have a device insertion. + * Request port soft reset to clear errors if they present. + * Inbound and outbound ackIDs will be 0 after reset. + */ + if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES)) { + rio_read_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), &rval); + rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), + rval | RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST); + udelay(10); + rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), rval); + msleep(500); + } + + return 0; +} + +static struct rio_switch_ops idtg3_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtg3_route_add_entry, + .get_entry = idtg3_route_get_entry, + .clr_table = idtg3_route_clr_table, + .em_init = idtg3_em_init, + .em_handle = idtg3_em_handler, +}; + +static int idtg3_probe(struct rio_dev *rdev, const struct rio_device_id *id) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtg3_switch_ops; + + if (rdev->do_enum) { + /* Disable hierarchical routing support: Existing fabric + * enumeration/discovery process (see rio-scan.c) uses 8-bit + * flat destination ID routing only. + */ + rio_write_config_32(rdev, 0x5000 + RIO_BC_RT_CTL_CSR, 0); + } + + spin_unlock(&rdev->rswitch->lock); + + return 0; +} + +static void idtg3_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops == &idtg3_switch_ops) + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +/* + * Gen3 switches repeat sending PW messages until a corresponding event flag + * is cleared. Use shutdown notification to disable generation of port-write + * messages if their destination node is shut down. + */ +static void idtg3_shutdown(struct rio_dev *rdev) +{ + int i; + u32 rval; + u16 destid; + + /* Currently the enumerator node acts also as PW handler */ + if (!rdev->do_enum) + return; + + pr_debug("RIO: %s(%s)\n", __func__, rio_name(rdev)); + + rio_read_config_32(rdev, RIO_PW_ROUTE, &rval); + i = RIO_GET_PORT_NUM(rdev->swpinfo); + + /* Check port-write destination port */ + if (!((1 << i) & rval)) + return; + + /* Disable sending port-write event notifications if PW destID + * matches to one of the enumerator node + */ + rio_read_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TGT_DEVID, &rval); + + if (rval & RIO_EM_PW_TGT_DEVID_DEV16) + destid = rval >> 16; + else + destid = ((rval & RIO_EM_PW_TGT_DEVID_D8) >> 16); + + if (rdev->net->hport->host_deviceid == destid) { + rio_write_config_32(rdev, + rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0); + pr_debug("RIO: %s(%s) PW transmission disabled\n", + __func__, rio_name(rdev)); + } +} + +static struct rio_device_id idtg3_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTRXS1632, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTRXS2448, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtg3_driver = { + .name = "idt_gen3", + .id_table = idtg3_id_table, + .probe = idtg3_probe, + .remove = idtg3_remove, + .shutdown = idtg3_shutdown, +}; + +static int __init idtg3_init(void) +{ + return rio_register_driver(&idtg3_driver); +} + +static void __exit idtg3_exit(void) +{ + pr_debug("RIO: %s\n", __func__); + rio_unregister_driver(&idtg3_driver); + pr_debug("RIO: %s done\n", __func__); +} + +device_initcall(idtg3_init); +module_exit(idtg3_exit); + +MODULE_DESCRIPTION("IDT RXS Gen.3 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index 42c8b014fe15..2700d15f7584 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev) /* Clear all pending interrupts */ rio_read_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), ®val); rio_write_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), regval & 0x07120214); rio_read_config_32(rdev, @@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev) /* Skip next (odd) port if the current port is in x4 mode */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), ®val); if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) portnum++; @@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) u32 regval; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), &err_status); if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && - (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES))) { + (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES))) { /* Remove any queued packets by locking/unlocking port */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), ®val); if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), regval | RIO_PORT_N_CTL_LOCKOUT); udelay(50); rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), regval); } @@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) * valid bit */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum), ®val); /* Send a Packet-Not-Accepted/Link-Request-Input-Status control @@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) while (checkcount--) { udelay(50); rio_read_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_MNT_RSP_CSR(portnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, + portnum), ®val); if (regval & RIO_PORT_N_MNT_RSP_RVAL) goto exit_es; diff --git a/drivers/video/fbdev/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c index 8fe41caac38e..e2d7d039ce3b 100644 --- a/drivers/video/fbdev/bfin_adv7393fb.c +++ b/drivers/video/fbdev/bfin_adv7393fb.c @@ -10,6 +10,8 @@ * TODO: Code Cleanup */ +#define DRIVER_NAME "bfin-adv7393" + #define pr_fmt(fmt) DRIVER_NAME ": " fmt #include <linux/module.h> diff --git a/drivers/video/fbdev/bfin_adv7393fb.h b/drivers/video/fbdev/bfin_adv7393fb.h index cd591b5152a5..afd0380e19e1 100644 --- a/drivers/video/fbdev/bfin_adv7393fb.h +++ b/drivers/video/fbdev/bfin_adv7393fb.h @@ -59,8 +59,6 @@ enum { BLANK_OFF, }; -#define DRIVER_NAME "bfin-adv7393" - struct adv7393fb_modes { const s8 name[25]; /* Full name */ u16 xres; /* Active Horizonzal Pixels */ diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index 10fbfd8ab963..b6bc4a0bda2a 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -36,11 +36,11 @@ static int __init fb_logo_late_init(void) late_initcall(fb_logo_late_init); -/* logo's are marked __initdata. Use __init_refok to tell +/* logo's are marked __initdata. Use __ref to tell * modpost that it is intended that this function uses data * marked __initdata. */ -const struct linux_logo * __init_refok fb_find_logo(int depth) +const struct linux_logo * __ref fb_find_logo(int depth) { const struct linux_logo *logo = NULL; diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index a2eec97d5064..bb09de633939 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -390,8 +390,6 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) goto out; } - hdq_data->hdq_irqstatus = 0; - if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c index d488961a8c90..51f2f66d6555 100644 --- a/drivers/w1/slaves/w1_ds2406.c +++ b/drivers/w1/slaves/w1_ds2406.c @@ -153,16 +153,4 @@ static struct w1_family w1_family_12 = { .fid = W1_FAMILY_DS2406, .fops = &w1_f12_fops, }; - -static int __init w1_f12_init(void) -{ - return w1_register_family(&w1_family_12); -} - -static void __exit w1_f12_exit(void) -{ - w1_unregister_family(&w1_family_12); -} - -module_init(w1_f12_init); -module_exit(w1_f12_exit); +module_w1_family(w1_family_12); diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index 7dfa0e11688a..aec5958e66e9 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -351,16 +351,4 @@ static struct w1_family w1_family_29 = { .fid = W1_FAMILY_DS2408, .fops = &w1_f29_fops, }; - -static int __init w1_f29_init(void) -{ - return w1_register_family(&w1_family_29); -} - -static void __exit w1_f29_exit(void) -{ - w1_unregister_family(&w1_family_29); -} - -module_init(w1_f29_init); -module_exit(w1_f29_exit); +module_w1_family(w1_family_29); diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c index ee28fc1ff390..f2e1c51533b9 100644 --- a/drivers/w1/slaves/w1_ds2413.c +++ b/drivers/w1/slaves/w1_ds2413.c @@ -135,16 +135,4 @@ static struct w1_family w1_family_3a = { .fid = W1_FAMILY_DS2413, .fops = &w1_f3a_fops, }; - -static int __init w1_f3a_init(void) -{ - return w1_register_family(&w1_family_3a); -} - -static void __exit w1_f3a_exit(void) -{ - w1_unregister_family(&w1_family_3a); -} - -module_init(w1_f3a_init); -module_exit(w1_f3a_exit); +module_w1_family(w1_family_3a); diff --git a/drivers/w1/slaves/w1_ds2423.c b/drivers/w1/slaves/w1_ds2423.c index 7e41b7d91fb5..4ab54fd9dde2 100644 --- a/drivers/w1/slaves/w1_ds2423.c +++ b/drivers/w1/slaves/w1_ds2423.c @@ -138,19 +138,7 @@ static struct w1_family w1_family_1d = { .fid = W1_COUNTER_DS2423, .fops = &w1_f1d_fops, }; - -static int __init w1_f1d_init(void) -{ - return w1_register_family(&w1_family_1d); -} - -static void __exit w1_f1d_exit(void) -{ - w1_unregister_family(&w1_family_1d); -} - -module_init(w1_f1d_init); -module_exit(w1_f1d_exit); +module_w1_family(w1_family_1d); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mika Laitio <lamikr@pilppa.org>"); diff --git a/drivers/w1/slaves/w1_ds2431.c b/drivers/w1/slaves/w1_ds2431.c index 9c4ff9d28adc..80572cb63ba8 100644 --- a/drivers/w1/slaves/w1_ds2431.c +++ b/drivers/w1/slaves/w1_ds2431.c @@ -288,19 +288,7 @@ static struct w1_family w1_family_2d = { .fid = W1_EEPROM_DS2431, .fops = &w1_f2d_fops, }; - -static int __init w1_f2d_init(void) -{ - return w1_register_family(&w1_family_2d); -} - -static void __exit w1_f2d_fini(void) -{ - w1_unregister_family(&w1_family_2d); -} - -module_init(w1_f2d_init); -module_exit(w1_f2d_fini); +module_w1_family(w1_family_2d); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Bernhard Weirich <bernhard.weirich@riedel.net>"); diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c index 72319a968a9e..6cf378c89ecb 100644 --- a/drivers/w1/slaves/w1_ds2433.c +++ b/drivers/w1/slaves/w1_ds2433.c @@ -305,16 +305,4 @@ static struct w1_family w1_family_23 = { .fid = W1_EEPROM_DS2433, .fops = &w1_f23_fops, }; - -static int __init w1_f23_init(void) -{ - return w1_register_family(&w1_family_23); -} - -static void __exit w1_f23_fini(void) -{ - w1_unregister_family(&w1_family_23); -} - -module_init(w1_f23_init); -module_exit(w1_f23_fini); +module_w1_family(w1_family_23); diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c index d9079d48d112..ffa37f773b3b 100644 --- a/drivers/w1/slaves/w1_ds2760.c +++ b/drivers/w1/slaves/w1_ds2760.c @@ -121,25 +121,14 @@ static const struct attribute_group *w1_ds2760_groups[] = { NULL, }; -static DEFINE_IDA(bat_ida); - static int w1_ds2760_add_slave(struct w1_slave *sl) { int ret; - int id; struct platform_device *pdev; - id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto noid; - } - - pdev = platform_device_alloc("ds2760-battery", id); - if (!pdev) { - ret = -ENOMEM; - goto pdev_alloc_failed; - } + pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO); + if (!pdev) + return -ENOMEM; pdev->dev.parent = &sl->dev; ret = platform_device_add(pdev); @@ -148,24 +137,19 @@ static int w1_ds2760_add_slave(struct w1_slave *sl) dev_set_drvdata(&sl->dev, pdev); - goto success; + return 0; pdev_add_failed: platform_device_put(pdev); -pdev_alloc_failed: - ida_simple_remove(&bat_ida, id); -noid: -success: + return ret; } static void w1_ds2760_remove_slave(struct w1_slave *sl) { struct platform_device *pdev = dev_get_drvdata(&sl->dev); - int id = pdev->id; platform_device_unregister(pdev); - ida_simple_remove(&bat_ida, id); } static struct w1_family_ops w1_ds2760_fops = { @@ -178,28 +162,13 @@ static struct w1_family w1_ds2760_family = { .fid = W1_FAMILY_DS2760, .fops = &w1_ds2760_fops, }; - -static int __init w1_ds2760_init(void) -{ - pr_info("1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko\n"); - ida_init(&bat_ida); - return w1_register_family(&w1_ds2760_family); -} - -static void __exit w1_ds2760_exit(void) -{ - w1_unregister_family(&w1_ds2760_family); - ida_destroy(&bat_ida); -} +module_w1_family(w1_ds2760_family); EXPORT_SYMBOL(w1_ds2760_read); EXPORT_SYMBOL(w1_ds2760_write); EXPORT_SYMBOL(w1_ds2760_store_eeprom); EXPORT_SYMBOL(w1_ds2760_recall_eeprom); -module_init(w1_ds2760_init); -module_exit(w1_ds2760_exit); - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>"); MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip"); diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c index 50e85f7929d4..f5c2aa429a92 100644 --- a/drivers/w1/slaves/w1_ds2780.c +++ b/drivers/w1/slaves/w1_ds2780.c @@ -113,25 +113,14 @@ static const struct attribute_group *w1_ds2780_groups[] = { NULL, }; -static DEFINE_IDA(bat_ida); - static int w1_ds2780_add_slave(struct w1_slave *sl) { int ret; - int id; struct platform_device *pdev; - id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto noid; - } - - pdev = platform_device_alloc("ds2780-battery", id); - if (!pdev) { - ret = -ENOMEM; - goto pdev_alloc_failed; - } + pdev = platform_device_alloc("ds2780-battery", PLATFORM_DEVID_AUTO); + if (!pdev) + return -ENOMEM; pdev->dev.parent = &sl->dev; ret = platform_device_add(pdev); @@ -144,19 +133,15 @@ static int w1_ds2780_add_slave(struct w1_slave *sl) pdev_add_failed: platform_device_put(pdev); -pdev_alloc_failed: - ida_simple_remove(&bat_ida, id); -noid: + return ret; } static void w1_ds2780_remove_slave(struct w1_slave *sl) { struct platform_device *pdev = dev_get_drvdata(&sl->dev); - int id = pdev->id; platform_device_unregister(pdev); - ida_simple_remove(&bat_ida, id); } static struct w1_family_ops w1_ds2780_fops = { @@ -169,21 +154,7 @@ static struct w1_family w1_ds2780_family = { .fid = W1_FAMILY_DS2780, .fops = &w1_ds2780_fops, }; - -static int __init w1_ds2780_init(void) -{ - ida_init(&bat_ida); - return w1_register_family(&w1_ds2780_family); -} - -static void __exit w1_ds2780_exit(void) -{ - w1_unregister_family(&w1_ds2780_family); - ida_destroy(&bat_ida); -} - -module_init(w1_ds2780_init); -module_exit(w1_ds2780_exit); +module_w1_family(w1_ds2780_family); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c index 1eb98fb1688d..9c03e014cf9e 100644 --- a/drivers/w1/slaves/w1_ds2781.c +++ b/drivers/w1/slaves/w1_ds2781.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/mutex.h> -#include <linux/idr.h> #include "../w1.h" #include "../w1_int.h" @@ -111,25 +110,14 @@ static const struct attribute_group *w1_ds2781_groups[] = { NULL, }; -static DEFINE_IDA(bat_ida); - static int w1_ds2781_add_slave(struct w1_slave *sl) { int ret; - int id; struct platform_device *pdev; - id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto noid; - } - - pdev = platform_device_alloc("ds2781-battery", id); - if (!pdev) { - ret = -ENOMEM; - goto pdev_alloc_failed; - } + pdev = platform_device_alloc("ds2781-battery", PLATFORM_DEVID_AUTO); + if (!pdev) + return -ENOMEM; pdev->dev.parent = &sl->dev; ret = platform_device_add(pdev); @@ -142,19 +130,15 @@ static int w1_ds2781_add_slave(struct w1_slave *sl) pdev_add_failed: platform_device_put(pdev); -pdev_alloc_failed: - ida_simple_remove(&bat_ida, id); -noid: + return ret; } static void w1_ds2781_remove_slave(struct w1_slave *sl) { struct platform_device *pdev = dev_get_drvdata(&sl->dev); - int id = pdev->id; platform_device_unregister(pdev); - ida_simple_remove(&bat_ida, id); } static struct w1_family_ops w1_ds2781_fops = { @@ -167,21 +151,7 @@ static struct w1_family w1_ds2781_family = { .fid = W1_FAMILY_DS2781, .fops = &w1_ds2781_fops, }; - -static int __init w1_ds2781_init(void) -{ - ida_init(&bat_ida); - return w1_register_family(&w1_ds2781_family); -} - -static void __exit w1_ds2781_exit(void) -{ - w1_unregister_family(&w1_ds2781_family); - ida_destroy(&bat_ida); -} - -module_init(w1_ds2781_init); -module_exit(w1_ds2781_exit); +module_w1_family(w1_ds2781_family); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>"); diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c index 365d6dff21de..5e348d38ec5c 100644 --- a/drivers/w1/slaves/w1_ds28e04.c +++ b/drivers/w1/slaves/w1_ds28e04.c @@ -427,16 +427,4 @@ static struct w1_family w1_family_1C = { .fid = W1_FAMILY_DS28E04, .fops = &w1_f1C_fops, }; - -static int __init w1_f1C_init(void) -{ - return w1_register_family(&w1_family_1C); -} - -static void __exit w1_f1C_fini(void) -{ - w1_unregister_family(&w1_family_1C); -} - -module_init(w1_f1C_init); -module_exit(w1_f1C_fini); +module_w1_family(w1_family_1C); diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index ed5dcb80a1f7..10a7a0767187 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -88,4 +88,16 @@ struct w1_family * w1_family_registered(u8); void w1_unregister_family(struct w1_family *); int w1_register_family(struct w1_family *); +/** + * module_w1_driver() - Helper macro for registering a 1-Wire families + * @__w1_family: w1_family struct + * + * Helper macro for 1-Wire families which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_w1_family(__w1_family) \ + module_driver(__w1_family, w1_register_family, \ + w1_unregister_family) + #endif /* __W1_FAMILY_H */ |