diff options
Diffstat (limited to 'drivers')
35 files changed, 1485 insertions, 603 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 4cb763a01f4d..91477d5ab422 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -541,4 +541,20 @@ if ARM64 source "drivers/acpi/arm64/Kconfig" endif +config TPS68470_PMIC_OPREGION + bool "ACPI operation region support for TPS68470 PMIC" + depends on MFD_TPS68470 + help + This config adds ACPI operation region support for TI TPS68470 PMIC. + TPS68470 device is an advanced power management unit that powers + a Compact Camera Module (CCM), generates clocks for image sensors, + drives a dual LED for flash and incorporates two LED drivers for + general purpose indicators. + This driver enables ACPI operation region support control voltage + regulators and clocks. + + This option is a bool as it provides an ACPI operation + region, which must be available before any of the devices + using this, are probed. + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 168e14d29d31..31c15d84a8d0 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -109,6 +109,8 @@ obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o +obj-$(CONFIG_TPS68470_PMIC_OPREGION) += pmic/tps68470_pmic.o + video-objs += acpi_video.o video_detect.o obj-y += dptf/ diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 8f52483219ba..47a7ed557bd6 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -265,6 +265,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); + /* fall through */ case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index de7385b824e1..7f2b02cc8ea1 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -362,7 +362,7 @@ static int register_device_clock(struct acpi_device *adev, { const struct lpss_device_desc *dev_desc = pdata->dev_desc; const char *devname = dev_name(&adev->dev); - struct clk *clk = ERR_PTR(-ENODEV); + struct clk *clk; struct lpss_clk_data *clk_data; const char *parent, *clk_name; void __iomem *prv_base; diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 86c10599d9f8..449d86d39965 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -82,6 +82,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) * PIIX4 models. */ errata.piix4.throttle = 1; + /* fall through*/ case 2: /* PIIX4E */ case 3: /* PIIX4M */ diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index e05232da0588..71f6f2624deb 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -178,6 +178,7 @@ acpi-y += \ utresrc.o \ utstate.o \ utstring.o \ + utstrsuppt.o \ utstrtoul64.o \ utxface.o \ utxfinit.o \ diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index fd4f3cacb356..cd722d8edacb 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -66,9 +66,9 @@ acpi_status acpi_hw_validate_register(struct acpi_generic_address *reg, u8 max_bit_width, u64 *address); -acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg); +acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg); -acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg); +acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg); struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id); diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h index 29a863c85318..29555c8789a3 100644 --- a/drivers/acpi/acpica/acinterp.h +++ b/drivers/acpi/acpica/acinterp.h @@ -101,7 +101,8 @@ typedef const struct acpi_exdump_info { */ acpi_status acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 flags); + union acpi_operand_object **result_desc, + u32 implicit_conversion); acpi_status acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, @@ -424,9 +425,6 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, struct acpi_walk_state *walk_state, u8 implicit_conversion); -#define ACPI_IMPLICIT_CONVERSION TRUE -#define ACPI_NO_IMPLICIT_CONVERSION FALSE - /* * exstoren - resolve/store object */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 745134ade35f..83b75e9db7ef 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -141,6 +141,11 @@ extern const char *acpi_gbl_ptyp_decode[]; #define ACPI_MSG_SUFFIX \ acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) +/* Flags to indicate implicit or explicit string-to-integer conversion */ + +#define ACPI_IMPLICIT_CONVERSION TRUE +#define ACPI_NO_IMPLICIT_CONVERSION FALSE + /* Types for Resource descriptor entries */ #define ACPI_INVALID_RESOURCE 0 @@ -197,15 +202,31 @@ void acpi_ut_strlwr(char *src_string); int acpi_ut_stricmp(char *string1, char *string2); -acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *ret_integer); +/* + * utstrsuppt - string-to-integer conversion support functions + */ +acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value); + +acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr); + +acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr); + +char acpi_ut_remove_whitespace(char **string); + +char acpi_ut_remove_leading_zeros(char **string); + +u8 acpi_ut_detect_hex_prefix(char **string); + +u8 acpi_ut_detect_octal_prefix(char **string); /* - * Values for Flags above - * Note: LIMIT values correspond to acpi_gbl_integer_byte_width values (4/8) + * utstrtoul64 - string-to-integer conversion functions */ -#define ACPI_STRTOUL_32BIT 0x04 /* 4 bytes */ -#define ACPI_STRTOUL_64BIT 0x08 /* 8 bytes */ -#define ACPI_STRTOUL_BASE16 0x10 /* Default: Base10/16 */ +acpi_status acpi_ut_strtoul64(char *string, u64 *ret_integer); + +u64 acpi_ut_explicit_strtoul64(char *string); + +u64 acpi_ut_implicit_strtoul64(char *string); /* * utglobal - Global data structures and procedures diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c index 857dbc43a9b1..32d546f0db2f 100644 --- a/drivers/acpi/acpica/dbconvert.c +++ b/drivers/acpi/acpica/dbconvert.c @@ -277,10 +277,7 @@ acpi_db_convert_to_object(acpi_object_type type, default: object->type = ACPI_TYPE_INTEGER; - status = acpi_ut_strtoul64(string, - (acpi_gbl_integer_byte_width | - ACPI_STRTOUL_BASE16), - &object->integer.value); + status = acpi_ut_strtoul64(string, &object->integer.value); break; } diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index 20d7744b06ae..22f45d090733 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -134,7 +134,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state, * object. Implicitly convert the argument if necessary. */ status = acpi_ex_convert_to_integer(obj_desc, &local_obj_desc, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); if (ACPI_FAILURE(status)) { goto cleanup; } diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 229382035550..263d8fc4a9e2 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -390,8 +390,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list) struct acpi_gpe_handler_info *gpe_handler_info; u32 int_status = ACPI_INTERRUPT_NOT_HANDLED; u8 enabled_status_byte; - u32 status_reg; - u32 enable_reg; + u64 status_reg; + u64 enable_reg; acpi_cpu_flags flags; u32 i; u32 j; @@ -472,7 +472,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list) gpe_register_info->base_gpe_number, gpe_register_info->base_gpe_number + (ACPI_GPE_REGISTER_WIDTH - 1), - status_reg, enable_reg, + (u32)status_reg, (u32)enable_reg, gpe_register_info->enable_for_run, gpe_register_info->enable_for_wake)); diff --git a/drivers/acpi/acpica/exconcat.c b/drivers/acpi/acpica/exconcat.c index 76bfb7dcae2f..59b8de2f07d3 100644 --- a/drivers/acpi/acpica/exconcat.c +++ b/drivers/acpi/acpica/exconcat.c @@ -156,7 +156,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, status = acpi_ex_convert_to_integer(local_operand1, &temp_operand1, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_BUFFER: diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index f71028e334ee..23ebadb06a95 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -57,10 +57,10 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); * * FUNCTION: acpi_ex_convert_to_integer * - * PARAMETERS: obj_desc - Object to be converted. Must be an - * Integer, Buffer, or String - * result_desc - Where the new Integer object is returned - * flags - Used for string conversion + * PARAMETERS: obj_desc - Object to be converted. Must be an + * Integer, Buffer, or String + * result_desc - Where the new Integer object is returned + * implicit_conversion - Used for string conversion * * RETURN: Status * @@ -70,14 +70,14 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); acpi_status acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 flags) + union acpi_operand_object **result_desc, + u32 implicit_conversion) { union acpi_operand_object *return_desc; u8 *pointer; u64 result; u32 i; u32 count; - acpi_status status; ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc); @@ -123,12 +123,18 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, * hexadecimal as per the ACPI specification. The only exception (as * of ACPI 3.0) is that the to_integer() operator allows both decimal * and hexadecimal strings (hex prefixed with "0x"). + * + * Explicit conversion is used only by to_integer. + * All other string-to-integer conversions are implicit conversions. */ - status = acpi_ut_strtoul64(ACPI_CAST_PTR(char, pointer), - (acpi_gbl_integer_byte_width | - flags), &result); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + if (implicit_conversion) { + result = + acpi_ut_implicit_strtoul64(ACPI_CAST_PTR + (char, pointer)); + } else { + result = + acpi_ut_explicit_strtoul64(ACPI_CAST_PTR + (char, pointer)); } break; @@ -631,7 +637,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, */ status = acpi_ex_convert_to_integer(source_desc, result_desc, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_STRING: diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 1e7649ce0a7b..dbad3ebd7df5 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -330,7 +330,7 @@ acpi_ex_do_logical_op(u16 opcode, case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer(operand1, &local_operand1, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_STRING: diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index c4852429e2ff..1c7c9962b0de 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -415,7 +415,7 @@ acpi_ex_resolve_operands(u16 opcode, * Known as "Implicit Source Operand Conversion" */ status = acpi_ex_convert_to_integer(obj_desc, stack_ptr, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); if (ACPI_FAILURE(status)) { if (status == AE_TYPE) { ACPI_ERROR((AE_INFO, diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 5eb11b30a79e..09b6822aa5cc 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -99,7 +99,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status = AE_OK; - u32 enable_mask; + u64 enable_mask; u32 register_bit; ACPI_FUNCTION_ENTRY(); @@ -214,7 +214,7 @@ acpi_status acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info, acpi_event_status *event_status) { - u32 in_byte; + u64 in_byte; u32 register_bit; struct acpi_gpe_register_info *gpe_register_info; acpi_event_status local_event_status = 0; diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index acb417b58bbb..aa6e00081915 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -220,16 +220,15 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, * * RETURN: Status * - * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max - * version of acpi_read, used internally since the overhead of - * 64-bit values is not needed. + * DESCRIPTION: Read from either memory or IO space. This is a 64-bit max + * version of acpi_read. * * LIMITATIONS: <These limitations also apply to acpi_hw_write> * space_ID must be system_memory or system_IO. * ******************************************************************************/ -acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) +acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg) { u64 address; u8 access_width; @@ -244,17 +243,17 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) /* Validate contents of the GAS register */ - status = acpi_hw_validate_register(reg, 32, &address); + status = acpi_hw_validate_register(reg, 64, &address); if (ACPI_FAILURE(status)) { return (status); } /* - * Initialize entire 32-bit return value to zero, convert access_width + * Initialize entire 64-bit return value to zero, convert access_width * into number of bits based */ *value = 0; - access_width = acpi_hw_get_access_bit_width(address, reg, 32); + access_width = acpi_hw_get_access_bit_width(address, reg, 64); bit_width = reg->bit_offset + reg->bit_width; bit_offset = reg->bit_offset; @@ -265,7 +264,7 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) index = 0; while (bit_width) { if (bit_offset >= access_width) { - value32 = 0; + value64 = 0; bit_offset -= access_width; } else { if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { @@ -276,7 +275,6 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) ACPI_DIV_8 (access_width), &value64, access_width); - value32 = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -286,15 +284,16 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) (access_width), &value32, access_width); + value64 = (u64)value32; } } /* * Use offset style bit writes because "Index * AccessWidth" is - * ensured to be less than 32-bits by acpi_hw_validate_register(). + * ensured to be less than 64-bits by acpi_hw_validate_register(). */ ACPI_SET_BITS(value, index * access_width, - ACPI_MASK_BITS_ABOVE_32(access_width), value32); + ACPI_MASK_BITS_ABOVE_64(access_width), value64); bit_width -= bit_width > access_width ? access_width : bit_width; @@ -302,8 +301,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", - *value, access_width, ACPI_FORMAT_UINT64(address), + "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(*value), access_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); @@ -318,20 +318,18 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) * * RETURN: Status * - * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max - * version of acpi_write, used internally since the overhead of - * 64-bit values is not needed. + * DESCRIPTION: Write to either memory or IO space. This is a 64-bit max + * version of acpi_write. * ******************************************************************************/ -acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) +acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg) { u64 address; u8 access_width; u32 bit_width; u8 bit_offset; u64 value64; - u32 value32; u8 index; acpi_status status; @@ -339,14 +337,14 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) /* Validate contents of the GAS register */ - status = acpi_hw_validate_register(reg, 32, &address); + status = acpi_hw_validate_register(reg, 64, &address); if (ACPI_FAILURE(status)) { return (status); } /* Convert access_width into number of bits based */ - access_width = acpi_hw_get_access_bit_width(address, reg, 32); + access_width = acpi_hw_get_access_bit_width(address, reg, 64); bit_width = reg->bit_offset + reg->bit_width; bit_offset = reg->bit_offset; @@ -358,16 +356,15 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) while (bit_width) { /* * Use offset style bit reads because "Index * AccessWidth" is - * ensured to be less than 32-bits by acpi_hw_validate_register(). + * ensured to be less than 64-bits by acpi_hw_validate_register(). */ - value32 = ACPI_GET_BITS(&value, index * access_width, - ACPI_MASK_BITS_ABOVE_32(access_width)); + value64 = ACPI_GET_BITS(&value, index * access_width, + ACPI_MASK_BITS_ABOVE_64(access_width)); if (bit_offset >= access_width) { bit_offset -= access_width; } else { if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - value64 = (u64)value32; status = acpi_os_write_memory((acpi_physical_address) address + @@ -382,7 +379,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) index * ACPI_DIV_8 (access_width), - value32, + (u32)value64, access_width); } } @@ -397,8 +394,9 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", - value, access_width, ACPI_FORMAT_UINT64(address), + "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(value), access_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); @@ -526,6 +524,7 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) { u32 value = 0; + u64 value64; acpi_status status; ACPI_FUNCTION_TRACE(hw_register_read); @@ -564,12 +563,14 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ status = - acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block); + acpi_hw_read(&value64, &acpi_gbl_FADT.xpm2_control_block); + value = (u32)value64; break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&value64, &acpi_gbl_FADT.xpm_timer_block); + value = (u32)value64; break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -586,7 +587,7 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) } if (ACPI_SUCCESS(status)) { - *return_value = value; + *return_value = (u32)value; } return_ACPI_STATUS(status); @@ -622,6 +623,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) { acpi_status status; u32 read_value; + u64 read_value64; ACPI_FUNCTION_TRACE(hw_register_write); @@ -685,11 +687,12 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) * as per the ACPI spec. */ status = - acpi_hw_read(&read_value, + acpi_hw_read(&read_value64, &acpi_gbl_FADT.xpm2_control_block); if (ACPI_FAILURE(status)) { goto exit; } + read_value = (u32)read_value64; /* Insert the bits to be preserved */ @@ -745,22 +748,25 @@ acpi_hw_read_multiple(u32 *value, { u32 value_a = 0; u32 value_b = 0; + u64 value64; acpi_status status; /* The first register is always required */ - status = acpi_hw_read(&value_a, register_a); + status = acpi_hw_read(&value64, register_a); if (ACPI_FAILURE(status)) { return (status); } + value_a = (u32)value64; /* Second register is optional */ if (register_b->address) { - status = acpi_hw_read(&value_b, register_b); + status = acpi_hw_read(&value64, register_b); if (ACPI_FAILURE(status)) { return (status); } + value_b = (u32)value64; } /* diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index b3c5d8c754bb..a2f4e25d45b1 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -94,6 +94,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution) acpi_status acpi_get_timer(u32 * ticks) { acpi_status status; + u64 timer_value; ACPI_FUNCTION_TRACE(acpi_get_timer); @@ -107,7 +108,14 @@ acpi_status acpi_get_timer(u32 * ticks) return_ACPI_STATUS(AE_SUPPORT); } - status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&timer_value, &acpi_gbl_FADT.xpm_timer_block); + if (ACPI_SUCCESS(status)) { + + /* ACPI PM Timer is defined to be 32 bits (PM_TMR_LEN) */ + + *ticks = (u32)timer_value; + } + return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 34684ae89981..b3c6e439933c 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -125,76 +125,12 @@ ACPI_EXPORT_SYMBOL(acpi_reset) ******************************************************************************/ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) { - u32 value_lo; - u32 value_hi; - u32 width; - u64 address; acpi_status status; ACPI_FUNCTION_NAME(acpi_read); - if (!return_value) { - return (AE_BAD_PARAMETER); - } - - /* Validate contents of the GAS register. Allow 64-bit transfers */ - - status = acpi_hw_validate_register(reg, 64, &address); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* - * Two address spaces supported: Memory or I/O. PCI_Config is - * not supported here because the GAS structure is insufficient - */ - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - status = acpi_os_read_memory((acpi_physical_address) - address, return_value, - reg->bit_width); - if (ACPI_FAILURE(status)) { - return (status); - } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - - value_lo = 0; - value_hi = 0; - - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - - status = acpi_hw_read_port((acpi_io_address) - address, &value_lo, width); - if (ACPI_FAILURE(status)) { - return (status); - } - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ - - status = acpi_hw_read_port((acpi_io_address) - (address + 4), &value_hi, - 32); - if (ACPI_FAILURE(status)) { - return (status); - } - } - - /* Set the return value only if status is AE_OK */ - - *return_value = (value_lo | ((u64)value_hi << 32)); - } - - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n", - ACPI_FORMAT_UINT64(*return_value), reg->bit_width, - ACPI_FORMAT_UINT64(address), - acpi_ut_get_region_name(reg->space_id))); - - return (AE_OK); + status = acpi_hw_read(return_value, reg); + return (status); } ACPI_EXPORT_SYMBOL(acpi_read) @@ -213,59 +149,11 @@ ACPI_EXPORT_SYMBOL(acpi_read) ******************************************************************************/ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) { - u32 width; - u64 address; acpi_status status; ACPI_FUNCTION_NAME(acpi_write); - /* Validate contents of the GAS register. Allow 64-bit transfers */ - - status = acpi_hw_validate_register(reg, 64, &address); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* - * Two address spaces supported: Memory or IO. PCI_Config is - * not supported here because the GAS structure is insufficient - */ - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); - if (ACPI_FAILURE(status)) { - return (status); - } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - - status = acpi_hw_write_port((acpi_io_address) - address, ACPI_LODWORD(value), - width); - if (ACPI_FAILURE(status)) { - return (status); - } - - if (reg->bit_width == 64) { - status = acpi_hw_write_port((acpi_io_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } - } - } - - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n", - ACPI_FORMAT_UINT64(value), reg->bit_width, - ACPI_FORMAT_UINT64(address), - acpi_ut_get_region_name(reg->space_id))); - + status = acpi_hw_write(value, reg); return (status); } diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c index e4a7da8a11f0..539d775bbc92 100644 --- a/drivers/acpi/acpica/nsconvert.c +++ b/drivers/acpi/acpica/nsconvert.c @@ -78,8 +78,8 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object, /* String-to-Integer conversion */ - status = acpi_ut_strtoul64(original_object->string.pointer, - acpi_gbl_integer_byte_width, &value); + status = + acpi_ut_strtoul64(original_object->string.pointer, &value); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index 26ad596c973e..5ecb8d2e6834 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -173,10 +173,13 @@ acpi_status ACPI_INIT_FUNCTION acpi_reallocate_root_table(void) ACPI_FUNCTION_TRACE(acpi_reallocate_root_table); /* - * Only reallocate the root table if the host provided a static buffer - * for the table array in the call to acpi_initialize_tables. + * If there are tables unverified, it is required to reallocate the + * root table list to clean up invalid table entries. Otherwise only + * reallocate the root table list if the host provided a static buffer + * for the table array in the call to acpi_initialize_tables(). */ - if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) { + if ((acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) && + acpi_gbl_enable_table_validation) { return_ACPI_STATUS(AE_SUPPORT); } diff --git a/drivers/acpi/acpica/utstrsuppt.c b/drivers/acpi/acpica/utstrsuppt.c new file mode 100644 index 000000000000..965fb5cec94f --- /dev/null +++ b/drivers/acpi/acpica/utstrsuppt.c @@ -0,0 +1,438 @@ +/******************************************************************************* + * + * Module Name: utstrsuppt - Support functions for string-to-integer conversion + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2017, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utstrsuppt") + +/* Local prototypes */ +static acpi_status +acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit); + +static acpi_status +acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product); + +static acpi_status +acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum); + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_octal_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 8 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned octal value is 01777777777777777777777 + * Maximum 32-bit unsigned octal value is 037777777777 + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Character must be ASCII 0-7, otherwise terminate with no error */ + + if (!(ACPI_IS_OCTAL_DIGIT(*string))) { + break; + } + + /* Convert and insert this octal digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 8, *string); + if (ACPI_FAILURE(status)) { + status = AE_OCTAL_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_decimal_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 10 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned decimal value is 18446744073709551615 + * Maximum 32-bit unsigned decimal value is 4294967295 + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Character must be ASCII 0-9, otherwise terminate with no error */ + + if (!isdigit(*string)) { + break; + } + + /* Convert and insert this decimal digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 10, *string); + if (ACPI_FAILURE(status)) { + status = AE_DECIMAL_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_hex_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 16 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned hex value is 0xFFFFFFFFFFFFFFFF + * Maximum 32-bit unsigned hex value is 0xFFFFFFFF + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Must be ASCII A-F, a-f, or 0-9, otherwise terminate with no error */ + + if (!isxdigit(*string)) { + break; + } + + /* Convert and insert this hex digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 16, *string); + if (ACPI_FAILURE(status)) { + status = AE_HEX_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_leading_zeros + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: Next character after any leading zeros. This character may be + * used by the caller to detect end-of-string. + * + * DESCRIPTION: Remove any leading zeros in the input string. Return the + * next character after the final ASCII zero to enable the caller + * to check for the end of the string (NULL terminator). + * + ******************************************************************************/ + +char acpi_ut_remove_leading_zeros(char **string) +{ + + while (**string == ACPI_ASCII_ZERO) { + *string += 1; + } + + return (**string); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_whitespace + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: Next character after any whitespace. This character may be + * used by the caller to detect end-of-string. + * + * DESCRIPTION: Remove any leading whitespace in the input string. Return the + * next character after the final ASCII zero to enable the caller + * to check for the end of the string (NULL terminator). + * + ******************************************************************************/ + +char acpi_ut_remove_whitespace(char **string) +{ + + while (isspace((u8)**string)) { + *string += 1; + } + + return (**string); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_detect_hex_prefix + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: TRUE if a "0x" prefix was found at the start of the string + * + * DESCRIPTION: Detect and remove a hex "0x" prefix + * + ******************************************************************************/ + +u8 acpi_ut_detect_hex_prefix(char **string) +{ + + if ((**string == ACPI_ASCII_ZERO) && + (tolower((int)*(*string + 1)) == 'x')) { + *string += 2; /* Go past the leading 0x */ + return (TRUE); + } + + return (FALSE); /* Not a hex string */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_detect_octal_prefix + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: True if an octal "0" prefix was found at the start of the + * string + * + * DESCRIPTION: Detect and remove an octal prefix (zero) + * + ******************************************************************************/ + +u8 acpi_ut_detect_octal_prefix(char **string) +{ + + if (**string == ACPI_ASCII_ZERO) { + *string += 1; /* Go past the leading 0 */ + return (TRUE); + } + + return (FALSE); /* Not an octal string */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_insert_digit + * + * PARAMETERS: accumulated_value - Current value of the integer value + * accumulator. The new value is + * returned here. + * base - Radix, either 8/10/16 + * ascii_digit - ASCII single digit to be inserted + * + * RETURN: Status and result of the convert/insert operation. The only + * possible returned exception code is numeric overflow of + * either the multiply or add conversion operations. + * + * DESCRIPTION: Generic conversion and insertion function for all bases: + * + * 1) Multiply the current accumulated/converted value by the + * base in order to make room for the new character. + * + * 2) Convert the new character to binary and add it to the + * current accumulated value. + * + * Note: The only possible exception indicates an integer + * overflow (AE_NUMERIC_OVERFLOW) + * + ******************************************************************************/ + +static acpi_status +acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit) +{ + acpi_status status; + u64 product; + + /* Make room in the accumulated value for the incoming digit */ + + status = acpi_ut_strtoul_multiply64(*accumulated_value, base, &product); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Add in the new digit, and store the sum to the accumulated value */ + + status = + acpi_ut_strtoul_add64(product, + acpi_ut_ascii_char_to_hex(ascii_digit), + accumulated_value); + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul_multiply64 + * + * PARAMETERS: multiplicand - Current accumulated converted integer + * multiplier - Base/Radix + * out_product - Where the product is returned + * + * RETURN: Status and 64-bit product + * + * DESCRIPTION: Multiply two 64-bit values, with checking for 64-bit overflow as + * well as 32-bit overflow if necessary (if the current global + * integer width is 32). + * + ******************************************************************************/ + +static acpi_status +acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product) +{ + u64 val; + + /* Exit if either operand is zero */ + + *out_product = 0; + if (!multiplicand || !multiplier) { + return (AE_OK); + } + + /* Check for 64-bit overflow before the actual multiplication */ + + acpi_ut_short_divide(ACPI_UINT64_MAX, (u32)multiplier, &val, NULL); + if (multiplicand > val) { + return (AE_NUMERIC_OVERFLOW); + } + + val = multiplicand * multiplier; + + /* Check for 32-bit overflow if necessary */ + + if ((acpi_gbl_integer_bit_width == 32) && (val > ACPI_UINT32_MAX)) { + return (AE_NUMERIC_OVERFLOW); + } + + *out_product = val; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul_add64 + * + * PARAMETERS: addend1 - Current accumulated converted integer + * addend2 - New hex value/char + * out_sum - Where sum is returned (Accumulator) + * + * RETURN: Status and 64-bit sum + * + * DESCRIPTION: Add two 64-bit values, with checking for 64-bit overflow as + * well as 32-bit overflow if necessary (if the current global + * integer width is 32). + * + ******************************************************************************/ + +static acpi_status acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum) +{ + u64 sum; + + /* Check for 64-bit overflow before the actual addition */ + + if ((addend1 > 0) && (addend2 > (ACPI_UINT64_MAX - addend1))) { + return (AE_NUMERIC_OVERFLOW); + } + + sum = addend1 + addend2; + + /* Check for 32-bit overflow if necessary */ + + if ((acpi_gbl_integer_bit_width == 32) && (sum > ACPI_UINT32_MAX)) { + return (AE_NUMERIC_OVERFLOW); + } + + *out_sum = sum; + return (AE_OK); +} diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c index 9633ee142855..e2067dcb9389 100644 --- a/drivers/acpi/acpica/utstrtoul64.c +++ b/drivers/acpi/acpica/utstrtoul64.c @@ -1,6 +1,7 @@ /******************************************************************************* * - * Module Name: utstrtoul64 - string to 64-bit integer support + * Module Name: utstrtoul64 - String-to-integer conversion support for both + * 64-bit and 32-bit integers * ******************************************************************************/ @@ -44,304 +45,319 @@ #include <acpi/acpi.h> #include "accommon.h" -/******************************************************************************* - * - * The functions in this module satisfy the need for 64-bit string-to-integer - * conversions on both 32-bit and 64-bit platforms. - * - ******************************************************************************/ - #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utstrtoul64") -/* Local prototypes */ -static u64 acpi_ut_strtoul_base10(char *string, u32 flags); - -static u64 acpi_ut_strtoul_base16(char *string, u32 flags); - /******************************************************************************* * - * String conversion rules as written in the ACPI specification. The error - * conditions and behavior are different depending on the type of conversion. - * - * - * Implicit data type conversion: string-to-integer - * -------------------------------------------------- - * - * Base is always 16. This is the ACPI_STRTOUL_BASE16 case. - * - * Example: - * Add ("BA98", Arg0, Local0) - * - * The integer is initialized to the value zero. - * The ASCII string is interpreted as a hexadecimal constant. + * This module contains the top-level string to 64/32-bit unsigned integer + * conversion functions: * - * 1) A "0x" prefix is not allowed. However, ACPICA allows this for - * compatibility with previous ACPICA. (NO ERROR) + * 1) A standard strtoul() function that supports 64-bit integers, base + * 8/10/16, with integer overflow support. This is used mainly by the + * iASL compiler, which implements tighter constraints on integer + * constants than the runtime (interpreter) integer-to-string conversions. + * 2) Runtime "Explicit conversion" as defined in the ACPI specification. + * 3) Runtime "Implicit conversion" as defined in the ACPI specification. * - * 2) Terminates when the size of an integer is reached (32 or 64 bits). - * (NO ERROR) + * Current users of this module: * - * 3) The first non-hex character terminates the conversion without error. - * (NO ERROR) - * - * 4) Conversion of a null (zero-length) string to an integer is not - * allowed. However, ACPICA allows this for compatibility with previous - * ACPICA. This conversion returns the value 0. (NO ERROR) - * - * - * Explicit data type conversion: to_integer() with string operand - * --------------------------------------------------------------- - * - * Base is either 10 (default) or 16 (with 0x prefix) - * - * Examples: - * to_integer ("1000") - * to_integer ("0xABCD") - * - * 1) Can be (must be) either a decimal or hexadecimal numeric string. - * A hex value must be prefixed by "0x" or it is interpreted as a decimal. + * iASL - Preprocessor (constants and math expressions) + * iASL - Main parser, conversion of constants to integers + * iASL - Data Table Compiler parser (constants and math expressions) + * interpreter - Implicit and explicit conversions, GPE method names + * interpreter - Repair code for return values from predefined names + * debugger - Command line input string conversion + * acpi_dump - ACPI table physical addresses + * acpi_exec - Support for namespace overrides * - * 2) The value must not exceed the maximum of an integer value. ACPI spec - * states the behavior is "unpredictable", so ACPICA matches the behavior - * of the implicit conversion case.(NO ERROR) + * Notes concerning users of these interfaces: * - * 3) Behavior on the first non-hex character is not specified by the ACPI - * spec, so ACPICA matches the behavior of the implicit conversion case - * and terminates. (NO ERROR) + * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit for explicit + * and implicit conversions. This global must be set to the proper width. + * For the core ACPICA code, the width depends on the DSDT version. For the + * acpi_ut_strtoul64 interface, all conversions are 64 bits. This interface is + * used primarily for iASL, where the default width is 64 bits for all parsers, + * but error checking is performed later to flag cases where a 64-bit constant + * is wrongly defined in a 32-bit DSDT/SSDT. * - * 4) A null (zero-length) string is illegal. - * However, ACPICA allows this for compatibility with previous ACPICA. - * This conversion returns the value 0. (NO ERROR) + * In ACPI, the only place where octal numbers are supported is within + * the ASL language itself. This is implemented via the main acpi_ut_strtoul64 + * interface. According the ACPI specification, there is no ACPI runtime + * support (explicit/implicit) for octal string conversions. * ******************************************************************************/ - /******************************************************************************* * * FUNCTION: acpi_ut_strtoul64 * - * PARAMETERS: string - Null terminated input string - * flags - Conversion info, see below + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer * return_value - Where the converted integer is - * returned - * - * RETURN: Status and Converted value + * returned. Must be a valid pointer * - * DESCRIPTION: Convert a string into an unsigned value. Performs either a - * 32-bit or 64-bit conversion, depending on the input integer - * size in Flags (often the current mode of the interpreter). + * RETURN: Status and converted integer. Returns an exception on a + * 64-bit numeric overflow * - * Values for Flags: - * ACPI_STRTOUL_32BIT - Max integer value is 32 bits - * ACPI_STRTOUL_64BIT - Max integer value is 64 bits - * ACPI_STRTOUL_BASE16 - Input string is hexadecimal. Default - * is 10/16 based on string prefix (0x). + * DESCRIPTION: Convert a string into an unsigned integer. Always performs a + * full 64-bit conversion, regardless of the current global + * integer width. Supports Decimal, Hex, and Octal strings. * - * NOTES: - * Negative numbers are not supported, as they are not supported by ACPI. + * Current users of this function: * - * Supports only base 16 or base 10 strings/values. Does not - * support Octal strings, as these are not supported by ACPI. - * - * Current users of this support: - * - * interpreter - Implicit and explicit conversions, GPE method names - * debugger - Command line input string conversion - * iASL - Main parser, conversion of constants to integers - * iASL - Data Table Compiler parser (constant math expressions) - * iASL - Preprocessor (constant math expressions) - * acpi_dump - Input table addresses - * acpi_exec - Testing of the acpi_ut_strtoul64 function - * - * Note concerning callers: - * acpi_gbl_integer_byte_width can be used to set the 32/64 limit. If used, - * this global should be set to the proper width. For the core ACPICA code, - * this width depends on the DSDT version. For iASL, the default byte - * width is always 8 for the parser, but error checking is performed later - * to flag cases where a 64-bit constant is defined in a 32-bit DSDT/SSDT. + * iASL - Preprocessor (constants and math expressions) + * iASL - Main ASL parser, conversion of ASL constants to integers + * iASL - Data Table Compiler parser (constants and math expressions) + * interpreter - Repair code for return values from predefined names + * acpi_dump - ACPI table physical addresses + * acpi_exec - Support for namespace overrides * ******************************************************************************/ - -acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *return_value) +acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) { acpi_status status = AE_OK; - u32 base; + u8 original_bit_width; + u32 base = 10; /* Default is decimal */ ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string); - /* Parameter validation */ - - if (!string || !return_value) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - *return_value = 0; - /* Check for zero-length string, returns 0 */ + /* A NULL return string returns a value of zero */ if (*string == 0) { return_ACPI_STATUS(AE_OK); } - /* Skip over any white space at start of string */ - - while (isspace((int)*string)) { - string++; - } - - /* End of string? return 0 */ - - if (*string == 0) { + if (!acpi_ut_remove_whitespace(&string)) { return_ACPI_STATUS(AE_OK); } /* - * 1) The "0x" prefix indicates base 16. Per the ACPI specification, - * the "0x" prefix is only allowed for implicit (non-strict) conversions. - * However, we always allow it for compatibility with older ACPICA. + * 1) Check for a hex constant. A "0x" prefix indicates base 16. */ - if ((*string == ACPI_ASCII_ZERO) && - (tolower((int)*(string + 1)) == 'x')) { - string += 2; /* Go past the 0x */ - if (*string == 0) { - return_ACPI_STATUS(AE_OK); /* Return value 0 */ - } - + if (acpi_ut_detect_hex_prefix(&string)) { base = 16; } - /* 2) Force to base 16 (implicit conversion case) */ - - else if (flags & ACPI_STRTOUL_BASE16) { - base = 16; + /* + * 2) Check for an octal constant, defined to be a leading zero + * followed by sequence of octal digits (0-7) + */ + else if (acpi_ut_detect_octal_prefix(&string)) { + base = 8; } - /* 3) Default fallback is to Base 10 */ - - else { - base = 10; + if (!acpi_ut_remove_leading_zeros(&string)) { + return_ACPI_STATUS(AE_OK); /* Return value 0 */ } - /* Skip all leading zeros */ + /* + * Force a full 64-bit conversion. The caller (usually iASL) must + * check for a 32-bit overflow later as necessary (If current mode + * is 32-bit, meaning a 32-bit DSDT). + */ + original_bit_width = acpi_gbl_integer_bit_width; + acpi_gbl_integer_bit_width = 64; - while (*string == ACPI_ASCII_ZERO) { - string++; - if (*string == 0) { - return_ACPI_STATUS(AE_OK); /* Return value 0 */ - } + /* + * Perform the base 8, 10, or 16 conversion. A 64-bit numeric overflow + * will return an exception (to allow iASL to flag the statement). + */ + switch (base) { + case 8: + status = acpi_ut_convert_octal_string(string, return_value); + break; + + case 10: + status = acpi_ut_convert_decimal_string(string, return_value); + break; + + case 16: + default: + status = acpi_ut_convert_hex_string(string, return_value); + break; } - /* Perform the base 16 or 10 conversion */ - - if (base == 16) { - *return_value = acpi_ut_strtoul_base16(string, flags); - } else { - *return_value = acpi_ut_strtoul_base10(string, flags); - } + /* Only possible exception from above is a 64-bit overflow */ + acpi_gbl_integer_bit_width = original_bit_width; return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_ut_strtoul_base10 + * FUNCTION: acpi_ut_implicit_strtoul64 + * + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer + * + * RETURN: Converted integer + * + * DESCRIPTION: Perform a 64-bit conversion with restrictions placed upon + * an "implicit conversion" by the ACPI specification. Used by + * many ASL operators that require an integer operand, and support + * an automatic (implicit) conversion from a string operand + * to the final integer operand. The major restriction is that + * only hex strings are supported. + * + * ----------------------------------------------------------------------------- + * + * Base is always 16, either with or without the 0x prefix. Decimal and + * Octal strings are not supported, as per the ACPI specification. + * + * Examples (both are hex values): + * Add ("BA98", Arg0, Local0) + * Subtract ("0x12345678", Arg1, Local1) + * + * Conversion rules as extracted from the ACPI specification: + * + * The converted integer is initialized to the value zero. + * The ASCII string is always interpreted as a hexadecimal constant. + * + * 1) According to the ACPI specification, a "0x" prefix is not allowed. + * However, ACPICA allows this as an ACPI extension on general + * principle. (NO ERROR) + * + * 2) The conversion terminates when the size of an integer is reached + * (32 or 64 bits). There are no numeric overflow conditions. (NO ERROR) + * + * 3) The first non-hex character terminates the conversion and returns + * the current accumulated value of the converted integer (NO ERROR). * - * PARAMETERS: string - Null terminated input string - * flags - Conversion info + * 4) Conversion of a null (zero-length) string to an integer is + * technically not allowed. However, ACPICA allows this as an ACPI + * extension. The conversion returns the value 0. (NO ERROR) * - * RETURN: 64-bit converted integer + * NOTE: There are no error conditions returned by this function. At + * the minimum, a value of zero is returned. * - * DESCRIPTION: Performs a base 10 conversion of the input string to an - * integer value, either 32 or 64 bits. - * Note: String must be valid and non-null. + * Current users of this function: + * + * interpreter - All runtime implicit conversions, as per ACPI specification + * iASL - Data Table Compiler parser (constants and math expressions) * ******************************************************************************/ -static u64 acpi_ut_strtoul_base10(char *string, u32 flags) +u64 acpi_ut_implicit_strtoul64(char *string) { - int ascii_digit; - u64 next_value; - u64 return_value = 0; - - /* Main loop: convert each ASCII byte in the input string */ - - while (*string) { - ascii_digit = *string; - if (!isdigit(ascii_digit)) { - - /* Not ASCII 0-9, terminate */ - - goto exit; - } - - /* Convert and insert (add) the decimal digit */ + u64 converted_integer = 0; - acpi_ut_short_multiply(return_value, 10, &next_value); - next_value += (ascii_digit - ACPI_ASCII_ZERO); + ACPI_FUNCTION_TRACE_STR(ut_implicit_strtoul64, string); - /* Check for overflow (32 or 64 bit) - return current converted value */ + if (!acpi_ut_remove_whitespace(&string)) { + return_VALUE(0); + } - if (((flags & ACPI_STRTOUL_32BIT) && (next_value > ACPI_UINT32_MAX)) || (next_value < return_value)) { /* 64-bit overflow case */ - goto exit; - } + /* + * Per the ACPI specification, only hexadecimal is supported for + * implicit conversions, and the "0x" prefix is "not allowed". + * However, allow a "0x" prefix as an ACPI extension. + */ + acpi_ut_detect_hex_prefix(&string); - return_value = next_value; - string++; + if (!acpi_ut_remove_leading_zeros(&string)) { + return_VALUE(0); } -exit: - return (return_value); + /* + * Ignore overflow as per the ACPI specification. This is implemented by + * ignoring the return status from the conversion function called below. + * On overflow, the input string is simply truncated. + */ + acpi_ut_convert_hex_string(string, &converted_integer); + return_VALUE(converted_integer); } /******************************************************************************* * - * FUNCTION: acpi_ut_strtoul_base16 + * FUNCTION: acpi_ut_explicit_strtoul64 + * + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer * - * PARAMETERS: string - Null terminated input string - * flags - conversion info + * RETURN: Converted integer * - * RETURN: 64-bit converted integer + * DESCRIPTION: Perform a 64-bit conversion with the restrictions placed upon + * an "explicit conversion" by the ACPI specification. The + * main restriction is that only hex and decimal are supported. * - * DESCRIPTION: Performs a base 16 conversion of the input string to an - * integer value, either 32 or 64 bits. - * Note: String must be valid and non-null. + * ----------------------------------------------------------------------------- + * + * Base is either 10 (default) or 16 (with 0x prefix). Octal (base 8) strings + * are not supported, as per the ACPI specification. + * + * Examples: + * to_integer ("1000") Decimal + * to_integer ("0xABCD") Hex + * + * Conversion rules as extracted from the ACPI specification: + * + * 1) The input string is either a decimal or hexadecimal numeric string. + * A hex value must be prefixed by "0x" or it is interpreted as decimal. + * + * 2) The value must not exceed the maximum of an integer value + * (32 or 64 bits). The ACPI specification states the behavior is + * "unpredictable", so ACPICA matches the behavior of the implicit + * conversion case. There are no numeric overflow conditions. (NO ERROR) + * + * 3) Behavior on the first non-hex character is not defined by the ACPI + * specification (for the to_integer operator), so ACPICA matches the + * behavior of the implicit conversion case. It terminates the + * conversion and returns the current accumulated value of the converted + * integer. (NO ERROR) + * + * 4) Conversion of a null (zero-length) string to an integer is + * technically not allowed. However, ACPICA allows this as an ACPI + * extension. The conversion returns the value 0. (NO ERROR) + * + * NOTE: There are no error conditions returned by this function. At the + * minimum, a value of zero is returned. + * + * Current users of this function: + * + * interpreter - Runtime ASL to_integer operator, as per the ACPI specification * ******************************************************************************/ -static u64 acpi_ut_strtoul_base16(char *string, u32 flags) +u64 acpi_ut_explicit_strtoul64(char *string) { - int ascii_digit; - u32 valid_digits = 1; - u64 return_value = 0; - - /* Main loop: convert each ASCII byte in the input string */ + u64 converted_integer = 0; + u32 base = 10; /* Default is decimal */ - while (*string) { + ACPI_FUNCTION_TRACE_STR(ut_explicit_strtoul64, string); - /* Check for overflow (32 or 64 bit) - return current converted value */ - - if ((valid_digits > 16) || - ((valid_digits > 8) && (flags & ACPI_STRTOUL_32BIT))) { - goto exit; - } - - ascii_digit = *string; - if (!isxdigit(ascii_digit)) { - - /* Not Hex ASCII A-F, a-f, or 0-9, terminate */ - - goto exit; - } + if (!acpi_ut_remove_whitespace(&string)) { + return_VALUE(0); + } - /* Convert and insert the hex digit */ + /* + * Only Hex and Decimal are supported, as per the ACPI specification. + * A "0x" prefix indicates hex; otherwise decimal is assumed. + */ + if (acpi_ut_detect_hex_prefix(&string)) { + base = 16; + } - acpi_ut_short_shift_left(return_value, 4, &return_value); - return_value |= acpi_ut_ascii_char_to_hex(ascii_digit); + if (!acpi_ut_remove_leading_zeros(&string)) { + return_VALUE(0); + } - string++; - valid_digits++; + /* + * Ignore overflow as per the ACPI specification. This is implemented by + * ignoring the return status from the conversion functions called below. + * On overflow, the input string is simply truncated. + */ + switch (base) { + case 10: + default: + acpi_ut_convert_decimal_string(string, &converted_integer); + break; + + case 16: + acpi_ut_convert_hex_string(string, &converted_integer); + break; } -exit: - return (return_value); + return_VALUE(converted_integer); } diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 2c462beee551..6742f6c68034 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -1061,7 +1061,7 @@ static int erst_writer(struct pstore_record *record) rcd->hdr.error_severity = CPER_SEV_FATAL; /* timestamp valid. platform_id, partition_id are invalid */ rcd->hdr.validation_bits = CPER_VALID_TIMESTAMP; - rcd->hdr.timestamp = get_seconds(); + rcd->hdr.timestamp = ktime_get_real_seconds(); rcd->hdr.record_length = sizeof(*rcd) + record->size; rcd->hdr.creator_id = CPER_CREATOR_PSTORE; rcd->hdr.notification_type = CPER_NOTIFY_MCE; diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index ebaa51ba8a22..6402f7fad3bb 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -51,6 +51,7 @@ #include <acpi/actbl1.h> #include <acpi/ghes.h> #include <acpi/apei.h> +#include <asm/fixmap.h> #include <asm/tlbflush.h> #include <ras/ras_event.h> @@ -112,22 +113,10 @@ static DEFINE_MUTEX(ghes_list_mutex); * Because the memory area used to transfer hardware error information * from BIOS to Linux can be determined only in NMI, IRQ or timer * handler, but general ioremap can not be used in atomic context, so - * a special version of atomic ioremap is implemented for that. - */ - -/* - * Two virtual pages are used, one for IRQ/PROCESS context, the other for - * NMI context (optionally). - */ -#define GHES_IOREMAP_PAGES 2 -#define GHES_IOREMAP_IRQ_PAGE(base) (base) -#define GHES_IOREMAP_NMI_PAGE(base) ((base) + PAGE_SIZE) - -/* virtual memory area for atomic ioremap */ -static struct vm_struct *ghes_ioremap_area; -/* - * These 2 spinlock is used to prevent atomic ioremap virtual memory - * area from being mapped simultaneously. + * the fixmap is used instead. + * + * These 2 spinlocks are used to prevent the fixmap entries from being used + * simultaneously. */ static DEFINE_RAW_SPINLOCK(ghes_ioremap_lock_nmi); static DEFINE_SPINLOCK(ghes_ioremap_lock_irq); @@ -140,71 +129,38 @@ static atomic_t ghes_estatus_cache_alloced; static int ghes_panic_timeout __read_mostly = 30; -static int ghes_ioremap_init(void) -{ - ghes_ioremap_area = __get_vm_area(PAGE_SIZE * GHES_IOREMAP_PAGES, - VM_IOREMAP, VMALLOC_START, VMALLOC_END); - if (!ghes_ioremap_area) { - pr_err(GHES_PFX "Failed to allocate virtual memory area for atomic ioremap.\n"); - return -ENOMEM; - } - - return 0; -} - -static void ghes_ioremap_exit(void) -{ - free_vm_area(ghes_ioremap_area); -} - static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn) { - unsigned long vaddr; phys_addr_t paddr; pgprot_t prot; - vaddr = (unsigned long)GHES_IOREMAP_NMI_PAGE(ghes_ioremap_area->addr); - paddr = pfn << PAGE_SHIFT; prot = arch_apei_get_mem_attribute(paddr); - ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot); + __set_fixmap(FIX_APEI_GHES_NMI, paddr, prot); - return (void __iomem *)vaddr; + return (void __iomem *) fix_to_virt(FIX_APEI_GHES_NMI); } static void __iomem *ghes_ioremap_pfn_irq(u64 pfn) { - unsigned long vaddr, paddr; + phys_addr_t paddr; pgprot_t prot; - vaddr = (unsigned long)GHES_IOREMAP_IRQ_PAGE(ghes_ioremap_area->addr); - paddr = pfn << PAGE_SHIFT; prot = arch_apei_get_mem_attribute(paddr); + __set_fixmap(FIX_APEI_GHES_IRQ, paddr, prot); - ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot); - - return (void __iomem *)vaddr; + return (void __iomem *) fix_to_virt(FIX_APEI_GHES_IRQ); } -static void ghes_iounmap_nmi(void __iomem *vaddr_ptr) +static void ghes_iounmap_nmi(void) { - unsigned long vaddr = (unsigned long __force)vaddr_ptr; - void *base = ghes_ioremap_area->addr; - - BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_NMI_PAGE(base)); - unmap_kernel_range_noflush(vaddr, PAGE_SIZE); - arch_apei_flush_tlb_one(vaddr); + clear_fixmap(FIX_APEI_GHES_NMI); } -static void ghes_iounmap_irq(void __iomem *vaddr_ptr) +static void ghes_iounmap_irq(void) { - unsigned long vaddr = (unsigned long __force)vaddr_ptr; - void *base = ghes_ioremap_area->addr; - - BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_IRQ_PAGE(base)); - unmap_kernel_range_noflush(vaddr, PAGE_SIZE); - arch_apei_flush_tlb_one(vaddr); + clear_fixmap(FIX_APEI_GHES_IRQ); } static int ghes_estatus_pool_init(void) @@ -360,10 +316,10 @@ static void ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len, paddr += trunk; buffer += trunk; if (in_nmi) { - ghes_iounmap_nmi(vaddr); + ghes_iounmap_nmi(); raw_spin_unlock(&ghes_ioremap_lock_nmi); } else { - ghes_iounmap_irq(vaddr); + ghes_iounmap_irq(); spin_unlock_irqrestore(&ghes_ioremap_lock_irq, flags); } } @@ -851,17 +807,8 @@ static void ghes_sea_remove(struct ghes *ghes) synchronize_rcu(); } #else /* CONFIG_ACPI_APEI_SEA */ -static inline void ghes_sea_add(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to add SEA notification which is not supported\n", - ghes->generic->header.source_id); -} - -static inline void ghes_sea_remove(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to remove SEA notification which is not supported\n", - ghes->generic->header.source_id); -} +static inline void ghes_sea_add(struct ghes *ghes) { } +static inline void ghes_sea_remove(struct ghes *ghes) { } #endif /* CONFIG_ACPI_APEI_SEA */ #ifdef CONFIG_HAVE_ACPI_APEI_NMI @@ -1063,23 +1010,9 @@ static void ghes_nmi_init_cxt(void) init_irq_work(&ghes_proc_irq_work, ghes_proc_in_irq); } #else /* CONFIG_HAVE_ACPI_APEI_NMI */ -static inline void ghes_nmi_add(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to add NMI notification which is not supported!\n", - ghes->generic->header.source_id); - BUG(); -} - -static inline void ghes_nmi_remove(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to remove NMI notification which is not supported!\n", - ghes->generic->header.source_id); - BUG(); -} - -static inline void ghes_nmi_init_cxt(void) -{ -} +static inline void ghes_nmi_add(struct ghes *ghes) { } +static inline void ghes_nmi_remove(struct ghes *ghes) { } +static inline void ghes_nmi_init_cxt(void) { } #endif /* CONFIG_HAVE_ACPI_APEI_NMI */ static int ghes_probe(struct platform_device *ghes_dev) @@ -1284,13 +1217,9 @@ static int __init ghes_init(void) ghes_nmi_init_cxt(); - rc = ghes_ioremap_init(); - if (rc) - goto err; - rc = ghes_estatus_pool_init(); if (rc) - goto err_ioremap_exit; + goto err; rc = ghes_estatus_pool_expand(GHES_ESTATUS_CACHE_AVG_SIZE * GHES_ESTATUS_CACHE_ALLOCED_MAX); @@ -1314,8 +1243,6 @@ static int __init ghes_init(void) return 0; err_pool_exit: ghes_estatus_pool_exit(); -err_ioremap_exit: - ghes_ioremap_exit(); err: return rc; } diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index ef1856b15488..c391898b483c 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -390,6 +390,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) { struct acpi_button *button = acpi_driver_data(device); struct input_dev *input; + int users; switch (event) { case ACPI_FIXED_HARDWARE_EVENT: @@ -398,7 +399,11 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_update_state(device); + mutex_lock(&button->input->mutex); + users = button->input->users; + mutex_unlock(&button->input->mutex); + if (users) + acpi_lid_update_state(device); } else { int keycode; @@ -442,12 +447,24 @@ static int acpi_button_resume(struct device *dev) struct acpi_button *button = acpi_driver_data(device); button->suspended = false; - if (button->type == ACPI_BUTTON_TYPE_LID) + if (button->type == ACPI_BUTTON_TYPE_LID && button->input->users) acpi_lid_initialize_state(device); return 0; } #endif +static int acpi_lid_input_open(struct input_dev *input) +{ + struct acpi_device *device = input_get_drvdata(input); + struct acpi_button *button = acpi_driver_data(device); + + button->last_state = !!acpi_lid_evaluate_state(device); + button->last_time = ktime_get(); + acpi_lid_initialize_state(device); + + return 0; +} + static int acpi_button_add(struct acpi_device *device) { struct acpi_button *button; @@ -488,8 +505,7 @@ static int acpi_button_add(struct acpi_device *device) strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID); - button->last_state = !!acpi_lid_evaluate_state(device); - button->last_time = ktime_get(); + input->open = acpi_lid_input_open; } else { printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); error = -ENODEV; @@ -522,11 +538,11 @@ static int acpi_button_add(struct acpi_device *device) break; } + input_set_drvdata(input, device); error = input_register_device(input); if (error) goto err_remove_fs; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_initialize_state(device); /* * This assumes there's only one lid device, or if there are * more we only care about the last one... diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index e5b47f032d9a..21c28433c590 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -48,7 +48,6 @@ struct cppc_pcc_data { struct mbox_chan *pcc_channel; void __iomem *pcc_comm_addr; - int pcc_subspace_idx; bool pcc_channel_acquired; ktime_t deadline; unsigned int pcc_mpar, pcc_mrtt, pcc_nominal; @@ -75,13 +74,16 @@ struct cppc_pcc_data { /* Wait queue for CPUs whose requests were batched */ wait_queue_head_t pcc_write_wait_q; + ktime_t last_cmd_cmpl_time; + ktime_t last_mpar_reset; + int mpar_count; + int refcount; }; -/* Structure to represent the single PCC channel */ -static struct cppc_pcc_data pcc_data = { - .pcc_subspace_idx = -1, - .platform_owns_pcc = true, -}; +/* Array to represent the PCC channel per subspace id */ +static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES]; +/* The cpu_pcc_subspace_idx containsper CPU subspace id */ +static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx); /* * The cpc_desc structure contains the ACPI register details @@ -93,7 +95,8 @@ static struct cppc_pcc_data pcc_data = { static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr); /* pcc mapped address + header size + offset within PCC subspace */ -#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs)) +#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \ + 0x8 + (offs)) /* Check if a CPC register is in PCC */ #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \ @@ -188,13 +191,16 @@ static struct kobj_type cppc_ktype = { .default_attrs = cppc_attrs, }; -static int check_pcc_chan(bool chk_err_bit) +static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit) { int ret = -EIO, status = 0; - struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_data.pcc_comm_addr; - ktime_t next_deadline = ktime_add(ktime_get(), pcc_data.deadline); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; + struct acpi_pcct_shared_memory __iomem *generic_comm_base = + pcc_ss_data->pcc_comm_addr; + ktime_t next_deadline = ktime_add(ktime_get(), + pcc_ss_data->deadline); - if (!pcc_data.platform_owns_pcc) + if (!pcc_ss_data->platform_owns_pcc) return 0; /* Retry in case the remote processor was too slow to catch up. */ @@ -219,7 +225,7 @@ static int check_pcc_chan(bool chk_err_bit) } if (likely(!ret)) - pcc_data.platform_owns_pcc = false; + pcc_ss_data->platform_owns_pcc = false; else pr_err("PCC check channel failed. Status=%x\n", status); @@ -230,13 +236,12 @@ static int check_pcc_chan(bool chk_err_bit) * This function transfers the ownership of the PCC to the platform * So it must be called while holding write_lock(pcc_lock) */ -static int send_pcc_cmd(u16 cmd) +static int send_pcc_cmd(int pcc_ss_id, u16 cmd) { int ret = -EIO, i; + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; struct acpi_pcct_shared_memory *generic_comm_base = - (struct acpi_pcct_shared_memory *) pcc_data.pcc_comm_addr; - static ktime_t last_cmd_cmpl_time, last_mpar_reset; - static int mpar_count; + (struct acpi_pcct_shared_memory *)pcc_ss_data->pcc_comm_addr; unsigned int time_delta; /* @@ -249,24 +254,25 @@ static int send_pcc_cmd(u16 cmd) * before write completion, so first send a WRITE command to * platform */ - if (pcc_data.pending_pcc_write_cmd) - send_pcc_cmd(CMD_WRITE); + if (pcc_ss_data->pending_pcc_write_cmd) + send_pcc_cmd(pcc_ss_id, CMD_WRITE); - ret = check_pcc_chan(false); + ret = check_pcc_chan(pcc_ss_id, false); if (ret) goto end; } else /* CMD_WRITE */ - pcc_data.pending_pcc_write_cmd = FALSE; + pcc_ss_data->pending_pcc_write_cmd = FALSE; /* * Handle the Minimum Request Turnaround Time(MRTT) * "The minimum amount of time that OSPM must wait after the completion * of a command before issuing the next command, in microseconds" */ - if (pcc_data.pcc_mrtt) { - time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); - if (pcc_data.pcc_mrtt > time_delta) - udelay(pcc_data.pcc_mrtt - time_delta); + if (pcc_ss_data->pcc_mrtt) { + time_delta = ktime_us_delta(ktime_get(), + pcc_ss_data->last_cmd_cmpl_time); + if (pcc_ss_data->pcc_mrtt > time_delta) + udelay(pcc_ss_data->pcc_mrtt - time_delta); } /* @@ -280,18 +286,19 @@ static int send_pcc_cmd(u16 cmd) * not send the request to the platform after hitting the MPAR limit in * any 60s window */ - if (pcc_data.pcc_mpar) { - if (mpar_count == 0) { - time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); - if (time_delta < 60 * MSEC_PER_SEC) { + if (pcc_ss_data->pcc_mpar) { + if (pcc_ss_data->mpar_count == 0) { + time_delta = ktime_ms_delta(ktime_get(), + pcc_ss_data->last_mpar_reset); + if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) { pr_debug("PCC cmd not sent due to MPAR limit"); ret = -EIO; goto end; } - last_mpar_reset = ktime_get(); - mpar_count = pcc_data.pcc_mpar; + pcc_ss_data->last_mpar_reset = ktime_get(); + pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar; } - mpar_count--; + pcc_ss_data->mpar_count--; } /* Write to the shared comm region. */ @@ -300,10 +307,10 @@ static int send_pcc_cmd(u16 cmd) /* Flip CMD COMPLETE bit */ writew_relaxed(0, &generic_comm_base->status); - pcc_data.platform_owns_pcc = true; + pcc_ss_data->platform_owns_pcc = true; /* Ring doorbell */ - ret = mbox_send_message(pcc_data.pcc_channel, &cmd); + ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd); if (ret < 0) { pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", cmd, ret); @@ -311,15 +318,15 @@ static int send_pcc_cmd(u16 cmd) } /* wait for completion and check for PCC errro bit */ - ret = check_pcc_chan(true); + ret = check_pcc_chan(pcc_ss_id, true); - if (pcc_data.pcc_mrtt) - last_cmd_cmpl_time = ktime_get(); + if (pcc_ss_data->pcc_mrtt) + pcc_ss_data->last_cmd_cmpl_time = ktime_get(); - if (pcc_data.pcc_channel->mbox->txdone_irq) - mbox_chan_txdone(pcc_data.pcc_channel, ret); + if (pcc_ss_data->pcc_channel->mbox->txdone_irq) + mbox_chan_txdone(pcc_ss_data->pcc_channel, ret); else - mbox_client_txdone(pcc_data.pcc_channel, ret); + mbox_client_txdone(pcc_ss_data->pcc_channel, ret); end: if (cmd == CMD_WRITE) { @@ -329,12 +336,12 @@ end: if (!desc) continue; - if (desc->write_cmd_id == pcc_data.pcc_write_cnt) + if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt) desc->write_cmd_status = ret; } } - pcc_data.pcc_write_cnt++; - wake_up_all(&pcc_data.pcc_write_wait_q); + pcc_ss_data->pcc_write_cnt++; + wake_up_all(&pcc_ss_data->pcc_write_wait_q); } return ret; @@ -536,16 +543,16 @@ err_ret: } EXPORT_SYMBOL_GPL(acpi_get_psd_map); -static int register_pcc_channel(int pcc_subspace_idx) +static int register_pcc_channel(int pcc_ss_idx) { struct acpi_pcct_hw_reduced *cppc_ss; u64 usecs_lat; - if (pcc_subspace_idx >= 0) { - pcc_data.pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl, - pcc_subspace_idx); + if (pcc_ss_idx >= 0) { + pcc_data[pcc_ss_idx]->pcc_channel = + pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx); - if (IS_ERR(pcc_data.pcc_channel)) { + if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) { pr_err("Failed to find PCC communication channel\n"); return -ENODEV; } @@ -556,7 +563,7 @@ static int register_pcc_channel(int pcc_subspace_idx) * PCC channels) and stored pointers to the * subspace communication region in con_priv. */ - cppc_ss = (pcc_data.pcc_channel)->con_priv; + cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv; if (!cppc_ss) { pr_err("No PCC subspace found for CPPC\n"); @@ -569,19 +576,20 @@ static int register_pcc_channel(int pcc_subspace_idx) * So add an arbitrary amount of wait on top of Nominal. */ usecs_lat = NUM_RETRIES * cppc_ss->latency; - pcc_data.deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); - pcc_data.pcc_mrtt = cppc_ss->min_turnaround_time; - pcc_data.pcc_mpar = cppc_ss->max_access_rate; - pcc_data.pcc_nominal = cppc_ss->latency; - - pcc_data.pcc_comm_addr = acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length); - if (!pcc_data.pcc_comm_addr) { + pcc_data[pcc_ss_idx]->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); + pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time; + pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate; + pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency; + + pcc_data[pcc_ss_idx]->pcc_comm_addr = + acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length); + if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) { pr_err("Failed to ioremap PCC comm region mem\n"); return -ENOMEM; } /* Set flag so that we dont come here for each CPU. */ - pcc_data.pcc_channel_acquired = true; + pcc_data[pcc_ss_idx]->pcc_channel_acquired = true; } return 0; @@ -600,6 +608,34 @@ bool __weak cpc_ffh_supported(void) return false; } + +/** + * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace + * + * Check and allocate the cppc_pcc_data memory. + * In some processor configurations it is possible that same subspace + * is shared between multiple CPU's. This is seen especially in CPU's + * with hardware multi-threading support. + * + * Return: 0 for success, errno for failure + */ +int pcc_data_alloc(int pcc_ss_id) +{ + if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES) + return -EINVAL; + + if (pcc_data[pcc_ss_id]) { + pcc_data[pcc_ss_id]->refcount++; + } else { + pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data), + GFP_KERNEL); + if (!pcc_data[pcc_ss_id]) + return -ENOMEM; + pcc_data[pcc_ss_id]->refcount++; + } + + return 0; +} /* * An example CPC table looks like the following. * @@ -661,6 +697,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) struct device *cpu_dev; acpi_handle handle = pr->handle; unsigned int num_ent, i, cpc_rev; + int pcc_subspace_id = -1; acpi_status status; int ret = -EFAULT; @@ -733,9 +770,11 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) * so extract it only once. */ if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { - if (pcc_data.pcc_subspace_idx < 0) - pcc_data.pcc_subspace_idx = gas_t->access_width; - else if (pcc_data.pcc_subspace_idx != gas_t->access_width) { + if (pcc_subspace_id < 0) { + pcc_subspace_id = gas_t->access_width; + if (pcc_data_alloc(pcc_subspace_id)) + goto out_free; + } else if (pcc_subspace_id != gas_t->access_width) { pr_debug("Mismatched PCC ids.\n"); goto out_free; } @@ -763,6 +802,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) goto out_free; } } + per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id; /* Store CPU Logical ID */ cpc_ptr->cpu_id = pr->id; @@ -771,14 +811,14 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) if (ret) goto out_free; - /* Register PCC channel once for all CPUs. */ - if (!pcc_data.pcc_channel_acquired) { - ret = register_pcc_channel(pcc_data.pcc_subspace_idx); + /* Register PCC channel once for all PCC subspace id. */ + if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) { + ret = register_pcc_channel(pcc_subspace_id); if (ret) goto out_free; - init_rwsem(&pcc_data.pcc_lock); - init_waitqueue_head(&pcc_data.pcc_write_wait_q); + init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock); + init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q); } /* Everything looks okay */ @@ -831,6 +871,18 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr) struct cpc_desc *cpc_ptr; unsigned int i; void __iomem *addr; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id); + + if (pcc_ss_id >=0 && pcc_data[pcc_ss_id]) { + if (pcc_data[pcc_ss_id]->pcc_channel_acquired) { + pcc_data[pcc_ss_id]->refcount--; + if (!pcc_data[pcc_ss_id]->refcount) { + pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel); + pcc_data[pcc_ss_id]->pcc_channel_acquired = 0; + kfree(pcc_data[pcc_ss_id]); + } + } + } cpc_ptr = per_cpu(cpc_desc_ptr, pr->id); if (!cpc_ptr) @@ -888,6 +940,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) { int ret_val = 0; void __iomem *vaddr = 0; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cpc_reg *reg = ®_res->cpc_entry.reg; if (reg_res->type == ACPI_TYPE_INTEGER) { @@ -897,7 +950,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) *val = 0; if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - vaddr = GET_PCC_VADDR(reg->address); + vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) @@ -932,10 +985,11 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val) { int ret_val = 0; void __iomem *vaddr = 0; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cpc_reg *reg = ®_res->cpc_entry.reg; if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - vaddr = GET_PCC_VADDR(reg->address); + vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) @@ -980,6 +1034,8 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) struct cpc_register_resource *highest_reg, *lowest_reg, *lowest_non_linear_reg, *nominal_reg; u64 high, low, nom, min_nonlinear; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; int ret = 0, regs_in_pcc = 0; if (!cpc_desc) { @@ -996,9 +1052,9 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) || CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg)) { regs_in_pcc = 1; - down_write(&pcc_data.pcc_lock); + down_write(&pcc_ss_data->pcc_lock); /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ) < 0) { + if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -1021,7 +1077,7 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) out_err: if (regs_in_pcc) - up_write(&pcc_data.pcc_lock); + up_write(&pcc_ss_data->pcc_lock); return ret; } EXPORT_SYMBOL_GPL(cppc_get_perf_caps); @@ -1038,6 +1094,8 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); struct cpc_register_resource *delivered_reg, *reference_reg, *ref_perf_reg, *ctr_wrap_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; u64 delivered, reference, ref_perf, ctr_wrap_time; int ret = 0, regs_in_pcc = 0; @@ -1061,10 +1119,10 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) /* Are any of the regs PCC ?*/ if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) || CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) { - down_write(&pcc_data.pcc_lock); + down_write(&pcc_ss_data->pcc_lock); regs_in_pcc = 1; /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ) < 0) { + if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -1094,7 +1152,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) perf_fb_ctrs->wraparound_time = ctr_wrap_time; out_err: if (regs_in_pcc) - up_write(&pcc_data.pcc_lock); + up_write(&pcc_ss_data->pcc_lock); return ret; } EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs); @@ -1110,6 +1168,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) { struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); struct cpc_register_resource *desired_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; int ret = 0; if (!cpc_desc) { @@ -1127,11 +1187,11 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * achieve that goal here */ if (CPC_IN_PCC(desired_reg)) { - down_read(&pcc_data.pcc_lock); /* BEGIN Phase-I */ - if (pcc_data.platform_owns_pcc) { - ret = check_pcc_chan(false); + down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */ + if (pcc_ss_data->platform_owns_pcc) { + ret = check_pcc_chan(pcc_ss_id, false); if (ret) { - up_read(&pcc_data.pcc_lock); + up_read(&pcc_ss_data->pcc_lock); return ret; } } @@ -1139,8 +1199,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * Update the pending_write to make sure a PCC CMD_READ will not * arrive and steal the channel during the switch to write lock */ - pcc_data.pending_pcc_write_cmd = true; - cpc_desc->write_cmd_id = pcc_data.pcc_write_cnt; + pcc_ss_data->pending_pcc_write_cmd = true; + cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt; cpc_desc->write_cmd_status = 0; } @@ -1151,7 +1211,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); if (CPC_IN_PCC(desired_reg)) - up_read(&pcc_data.pcc_lock); /* END Phase-I */ + up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */ /* * This is Phase-II where we transfer the ownership of PCC to Platform * @@ -1199,15 +1259,15 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * the write command before servicing the read command */ if (CPC_IN_PCC(desired_reg)) { - if (down_write_trylock(&pcc_data.pcc_lock)) { /* BEGIN Phase-II */ + if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */ /* Update only if there are pending write commands */ - if (pcc_data.pending_pcc_write_cmd) - send_pcc_cmd(CMD_WRITE); - up_write(&pcc_data.pcc_lock); /* END Phase-II */ + if (pcc_ss_data->pending_pcc_write_cmd) + send_pcc_cmd(pcc_ss_id, CMD_WRITE); + up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */ } else /* Wait until pcc_write_cnt is updated by send_pcc_cmd */ - wait_event(pcc_data.pcc_write_wait_q, - cpc_desc->write_cmd_id != pcc_data.pcc_write_cnt); + wait_event(pcc_ss_data->pcc_write_wait_q, + cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt); /* send_pcc_cmd updates the status in case of failure */ ret = cpc_desc->write_cmd_status; @@ -1240,6 +1300,8 @@ unsigned int cppc_get_transition_latency(int cpu_num) unsigned int latency_ns = 0; struct cpc_desc *cpc_desc; struct cpc_register_resource *desired_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; cpc_desc = per_cpu(cpc_desc_ptr, cpu_num); if (!cpc_desc) @@ -1249,11 +1311,11 @@ unsigned int cppc_get_transition_latency(int cpu_num) if (!CPC_IN_PCC(desired_reg)) return CPUFREQ_ETERNAL; - if (pcc_data.pcc_mpar) - latency_ns = 60 * (1000 * 1000 * 1000 / pcc_data.pcc_mpar); + if (pcc_ss_data->pcc_mpar) + latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar); - latency_ns = max(latency_ns, pcc_data.pcc_nominal * 1000); - latency_ns = max(latency_ns, pcc_data.pcc_mrtt * 1000); + latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000); + latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000); return latency_ns; } diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 2305e1ab978e..e3fc1f045e1c 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -482,6 +482,7 @@ int dock_notify(struct acpi_device *adev, u32 event) surprise_removal = 1; event = ACPI_NOTIFY_EJECT_REQUEST; /* Fall back */ + /* fall through */ case ACPI_NOTIFY_EJECT_REQUEST: begin_undock(ds); if ((immediate_undock && !(ds->flags & DOCK_IS_ATA)) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 236b14324780..82b3ce5e937e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -486,8 +486,11 @@ static inline void __acpi_ec_enable_event(struct acpi_ec *ec) { if (!test_and_set_bit(EC_FLAGS_QUERY_ENABLED, &ec->flags)) ec_log_drv("event unblocked"); - if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - advance_transaction(ec); + /* + * Unconditionally invoke this once after enabling the event + * handling mechanism to detect the pending events. + */ + advance_transaction(ec); } static inline void __acpi_ec_disable_event(struct acpi_ec *ec) @@ -1456,11 +1459,10 @@ static int ec_install_handlers(struct acpi_ec *ec, bool handle_events) if (test_bit(EC_FLAGS_STARTED, &ec->flags) && ec->reference_count >= 1) acpi_ec_enable_gpe(ec, true); - - /* EC is fully operational, allow queries */ - acpi_ec_enable_event(ec); } } + /* EC is fully operational, allow queries */ + acpi_ec_enable_event(ec); return 0; } diff --git a/drivers/acpi/pmic/tps68470_pmic.c b/drivers/acpi/pmic/tps68470_pmic.c new file mode 100644 index 000000000000..7f3c567e8168 --- /dev/null +++ b/drivers/acpi/pmic/tps68470_pmic.c @@ -0,0 +1,455 @@ +/* + * TI TPS68470 PMIC operation region driver + * + * Copyright (C) 2017 Intel Corporation. All rights reserved. + * + * Author: Rajmohan Mani <rajmohan.mani@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Based on drivers/acpi/pmic/intel_pmic* drivers + */ + +#include <linux/acpi.h> +#include <linux/mfd/tps68470.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +struct tps68470_pmic_table { + u32 address; /* operation region address */ + u32 reg; /* corresponding register */ + u32 bitmask; /* bit mask for power, clock */ +}; + +#define TI_PMIC_POWER_OPREGION_ID 0xB0 +#define TI_PMIC_VR_VAL_OPREGION_ID 0xB1 +#define TI_PMIC_CLOCK_OPREGION_ID 0xB2 +#define TI_PMIC_CLKFREQ_OPREGION_ID 0xB3 + +struct tps68470_pmic_opregion { + struct mutex lock; + struct regmap *regmap; +}; + +#define S_IO_I2C_EN (BIT(0) | BIT(1)) + +static const struct tps68470_pmic_table power_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_S_I2C_CTL, + .bitmask = S_IO_I2C_EN, + /* S_I2C_CTL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_VCMCTL, + .bitmask = BIT(0), + /* VCMCTL */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_VAUX1CTL, + .bitmask = BIT(0), + /* VAUX1_CTL */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_VAUX2CTL, + .bitmask = BIT(0), + /* VAUX2CTL */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_VACTL, + .bitmask = BIT(0), + /* VACTL */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_VDCTL, + .bitmask = BIT(0), + /* VDCTL */ + }, +}; + +/* Table to set voltage regulator value */ +static const struct tps68470_pmic_table vr_val_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_VSIOVAL, + .bitmask = TPS68470_VSIOVAL_IOVOLT_MASK, + /* TPS68470_REG_VSIOVAL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_VIOVAL, + .bitmask = TPS68470_VIOVAL_IOVOLT_MASK, + /* TPS68470_REG_VIOVAL */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_VCMVAL, + .bitmask = TPS68470_VCMVAL_VCVOLT_MASK, + /* TPS68470_REG_VCMVAL */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_VAUX1VAL, + .bitmask = TPS68470_VAUX1VAL_AUX1VOLT_MASK, + /* TPS68470_REG_VAUX1VAL */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_VAUX2VAL, + .bitmask = TPS68470_VAUX2VAL_AUX2VOLT_MASK, + /* TPS68470_REG_VAUX2VAL */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_VAVAL, + .bitmask = TPS68470_VAVAL_AVOLT_MASK, + /* TPS68470_REG_VAVAL */ + }, + { + .address = 0x18, + .reg = TPS68470_REG_VDVAL, + .bitmask = TPS68470_VDVAL_DVOLT_MASK, + /* TPS68470_REG_VDVAL */ + }, +}; + +/* Table to configure clock frequency */ +static const struct tps68470_pmic_table clk_freq_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_POSTDIV2, + .bitmask = BIT(0) | BIT(1), + /* TPS68470_REG_POSTDIV2 */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_BOOSTDIV, + .bitmask = 0x1F, + /* TPS68470_REG_BOOSTDIV */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_BUCKDIV, + .bitmask = 0x0F, + /* TPS68470_REG_BUCKDIV */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_PLLSWR, + .bitmask = 0x13, + /* TPS68470_REG_PLLSWR */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_XTALDIV, + .bitmask = 0xFF, + /* TPS68470_REG_XTALDIV */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_PLLDIV, + .bitmask = 0xFF, + /* TPS68470_REG_PLLDIV */ + }, + { + .address = 0x18, + .reg = TPS68470_REG_POSTDIV, + .bitmask = 0x83, + /* TPS68470_REG_POSTDIV */ + }, +}; + +/* Table to configure and enable clocks */ +static const struct tps68470_pmic_table clk_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_PLLCTL, + .bitmask = 0xF5, + /* TPS68470_REG_PLLCTL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_PLLCTL2, + .bitmask = BIT(0), + /* TPS68470_REG_PLLCTL2 */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_CLKCFG1, + .bitmask = TPS68470_CLKCFG1_MODE_A_MASK | + TPS68470_CLKCFG1_MODE_B_MASK, + /* TPS68470_REG_CLKCFG1 */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_CLKCFG2, + .bitmask = TPS68470_CLKCFG1_MODE_A_MASK | + TPS68470_CLKCFG1_MODE_B_MASK, + /* TPS68470_REG_CLKCFG2 */ + }, +}; + +static int pmic_get_reg_bit(u64 address, + const struct tps68470_pmic_table *table, + const unsigned int table_size, int *reg, + int *bitmask) +{ + u64 i; + + i = address / 4; + if (i >= table_size) + return -ENOENT; + + if (!reg || !bitmask) + return -EINVAL; + + *reg = table[i].reg; + *bitmask = table[i].bitmask; + + return 0; +} + +static int tps68470_pmic_get_power(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & bitmask) ? 1 : 0; + return 0; +} + +static int tps68470_pmic_get_vr_val(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = data & bitmask; + return 0; +} + +static int tps68470_pmic_get_clk(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & bitmask) ? 1 : 0; + return 0; +} + +static int tps68470_pmic_get_clk_freq(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = data & bitmask; + return 0; +} + +static int ti_tps68470_regmap_update_bits(struct regmap *regmap, int reg, + int bitmask, u64 value) +{ + return regmap_update_bits(regmap, reg, bitmask, value); +} + +static acpi_status tps68470_pmic_common_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *region_context, + int (*get)(struct regmap *, + int, int, u64 *), + int (*update)(struct regmap *, + int, int, u64), + const struct tps68470_pmic_table *tbl, + unsigned int tbl_size) +{ + struct tps68470_pmic_opregion *opregion = region_context; + struct regmap *regmap = opregion->regmap; + int reg, ret, bitmask; + + if (bits != 32) + return AE_BAD_PARAMETER; + + ret = pmic_get_reg_bit(address, tbl, tbl_size, ®, &bitmask); + if (ret < 0) + return AE_BAD_PARAMETER; + + if (function == ACPI_WRITE && *value > bitmask) + return AE_BAD_PARAMETER; + + mutex_lock(&opregion->lock); + + ret = (function == ACPI_READ) ? + get(regmap, reg, bitmask, value) : + update(regmap, reg, bitmask, *value); + + mutex_unlock(&opregion->lock); + + return ret ? AE_ERROR : AE_OK; +} + +static acpi_status tps68470_pmic_cfreq_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_clk_freq, + ti_tps68470_regmap_update_bits, + clk_freq_table, + ARRAY_SIZE(clk_freq_table)); +} + +static acpi_status tps68470_pmic_clk_handler(u32 function, + acpi_physical_address address, u32 bits, + u64 *value, void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_clk, + ti_tps68470_regmap_update_bits, + clk_table, + ARRAY_SIZE(clk_table)); +} + +static acpi_status tps68470_pmic_vrval_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_vr_val, + ti_tps68470_regmap_update_bits, + vr_val_table, + ARRAY_SIZE(vr_val_table)); +} + +static acpi_status tps68470_pmic_pwr_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + if (bits != 32) + return AE_BAD_PARAMETER; + + /* set/clear for bit 0, bits 0 and 1 together */ + if (function == ACPI_WRITE && + !(*value == 0 || *value == 1 || *value == 3)) { + return AE_BAD_PARAMETER; + } + + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_power, + ti_tps68470_regmap_update_bits, + power_table, + ARRAY_SIZE(power_table)); +} + +static int tps68470_pmic_opregion_probe(struct platform_device *pdev) +{ + struct regmap *tps68470_regmap = dev_get_drvdata(pdev->dev.parent); + acpi_handle handle = ACPI_HANDLE(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct tps68470_pmic_opregion *opregion; + acpi_status status; + + if (!dev || !tps68470_regmap) { + dev_warn(dev, "dev or regmap is NULL\n"); + return -EINVAL; + } + + if (!handle) { + dev_warn(dev, "acpi handle is NULL\n"); + return -ENODEV; + } + + opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL); + if (!opregion) + return -ENOMEM; + + mutex_init(&opregion->lock); + opregion->regmap = tps68470_regmap; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_POWER_OPREGION_ID, + tps68470_pmic_pwr_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_mutex_destroy; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_VR_VAL_OPREGION_ID, + tps68470_pmic_vrval_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_power_handler; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_CLOCK_OPREGION_ID, + tps68470_pmic_clk_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_vr_val_handler; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_CLKFREQ_OPREGION_ID, + tps68470_pmic_cfreq_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_clk_handler; + + return 0; + +out_remove_clk_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_CLOCK_OPREGION_ID, + tps68470_pmic_clk_handler); +out_remove_vr_val_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_VR_VAL_OPREGION_ID, + tps68470_pmic_vrval_handler); +out_remove_power_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_POWER_OPREGION_ID, + tps68470_pmic_pwr_handler); +out_mutex_destroy: + mutex_destroy(&opregion->lock); + return -ENODEV; +} + +static struct platform_driver tps68470_pmic_opregion_driver = { + .probe = tps68470_pmic_opregion_probe, + .driver = { + .name = "tps68470_pmic_opregion", + }, +}; + +builtin_platform_driver(tps68470_pmic_opregion_driver) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index d85e010ee2cc..316a0fc785e3 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -381,6 +381,7 @@ unsigned int acpi_dev_get_irq_type(int triggering, int polarity) case ACPI_ACTIVE_BOTH: if (triggering == ACPI_EDGE_SENSITIVE) return IRQ_TYPE_EDGE_BOTH; + /* fall through */ default: return IRQ_TYPE_NONE; } diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 0fd57bf33524..bc303df60d5d 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -169,7 +169,8 @@ module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644); static char trace_method_name[1024]; -int param_set_trace_method_name(const char *val, const struct kernel_param *kp) +static int param_set_trace_method_name(const char *val, + const struct kernel_param *kp) { u32 saved_flags = 0; bool is_abs_path = true; diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index b4fbb9929482..ec5b0f190231 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -71,18 +71,34 @@ static const struct always_present_id always_present_ids[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"), }), /* - * The GPD win BIOS dated 20170320 has disabled the accelerometer, the + * The GPD win BIOS dated 20170221 has disabled the accelerometer, the * drivers sometimes cause crashes under Windows and this is how the * manufacturer has solved this :| Note that the the DMI data is less * generic then it seems, a board_vendor of "AMI Corporation" is quite * rare and a board_name of "Default String" also is rare. + * + * Unfortunately the GPD pocket also uses these strings and its BIOS + * was copy-pasted from the GPD win, so it has a disabled KIOX000A + * node which we should not enable, thus we also check the BIOS date. */ ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), DMI_MATCH(DMI_BOARD_NAME, "Default string"), DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_BIOS_DATE, "02/21/2017") + }), + ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), DMI_MATCH(DMI_BIOS_DATE, "03/20/2017") }), + ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_BIOS_DATE, "05/25/2017") + }), }; bool acpi_device_always_present(struct acpi_device *adev) diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index 9b7005e1345e..e5a69679cfa2 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -69,7 +69,6 @@ #include "mailbox.h" -#define MAX_PCC_SUBSPACES 256 #define MBOX_IRQ_NAME "pcc-mbox" static struct mbox_chan *pcc_mbox_channels; |