summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hid/Kconfig2
-rw-r--r--drivers/isdn/hardware/eicon/divacapi.h6
-rw-r--r--drivers/isdn/hardware/eicon/pc.h4
-rw-r--r--drivers/isdn/mISDN/l1oip_core.c2
-rw-r--r--drivers/media/platform/soc_camera/mx2_camera.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_main.c2
-rw-r--r--drivers/net/irda/ali-ircc.c2
-rw-r--r--drivers/staging/android/binder.h2
-rw-r--r--drivers/staging/octeon/ethernet.c2
-rw-r--r--drivers/tty/ipwireless/hardware.c4
11 files changed, 15 insertions, 15 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 1630150ad2b1..eb325baa738a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -311,7 +311,7 @@ config HID_LOGITECH_DJ
Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant
devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incomming events will be multiplexed
+ generic USB_HID driver and all incoming events will be multiplexed
into a single mouse and a single keyboard device.
config LOGITECH_FF
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 3942efbbfb58..a315a2914d70 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER {
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */
@@ -1125,7 +1125,7 @@ extern word li_total_channels;
| Direction | word | Enable compression/decompression for |
| | | 0: All direction |
| | | 1: disable outgoing data |
- | | | 2: disable incomming data |
+ | | | 2: disable incoming data |
| | | 3: disable both direction (default) |
+---------------------+------+-----------------------------------------+
| Number of code | word | Parameter P1 of V.42bis in accordance |
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 889dc984bbca..329c0c26abfb 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -419,11 +419,11 @@ struct dual
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* x.75 with V.42bis */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */
#define LISTENER 27 /* Layer 2 to listen line */
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index db50f788855d..d67126dbbb04 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -692,7 +692,7 @@ l1oip_socket_thread(void *data)
hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
- /* bind to incomming port */
+ /* bind to incoming port */
if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
sizeof(hc->sin_local))) {
printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 9fd9d1c5b218..4544a0734df3 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -312,7 +312,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
/*
* This is a generic configuration which is valid for most
* prp input-output format combinations.
- * We set the incomming and outgoing pixelformat to a
+ * We set the incoming and outgoing pixelformat to a
* 16 Bit wide format and adjust the bytesperline
* accordingly. With this configuration the inputdata
* will not be changed by the emma and could be any type
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc666bd..2bf4c08efad9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8498,7 +8498,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
(!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
(val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
- /* Prevent incomming interrupts in IGU */
+ /* Prevent incoming interrupts in IGU */
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index a52922ed85c1..d09b0d9ca68b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -64,7 +64,7 @@ static const char mlx4_en_version[] =
/* Enable RSS UDP traffic */
MLX4_EN_PARM_INT(udp_rss, 1,
- "Enable RSS for incomming UDP traffic or disabled (0)");
+ "Enable RSS for incoming UDP traffic or disabled (0)");
/* Priority pausing */
MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 84872043b5c6..9cea451a6081 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Enable Interuupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
- /* Be ready for incomming frames */
+ /* Be ready for incoming frames */
ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
}
/* Go to SIR Speed */
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 2f7d195d8b15..629372f89658 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -224,7 +224,7 @@ enum BinderDriverReturnProtocol {
BR_SPAWN_LOOPER = _IO('r', 13),
/*
* No parameters. The driver has determined that a process has no
- * threads waiting to service incomming transactions. When a process
+ * threads waiting to service incoming transactions. When a process
* receives this command, it must spawn a new service thread and
* register it via bcENTER_LOOPER.
*/
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 683bedc74dde..b595b9ddd536 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -72,7 +72,7 @@ int pow_receive_group = 15;
module_param(pow_receive_group, int, 0444);
MODULE_PARM_DESC(pow_receive_group, "\n"
"\tPOW group to receive packets from. All ethernet hardware\n"
- "\twill be configured to send incomming packets to this POW\n"
+ "\twill be configured to send incoming packets to this POW\n"
"\tgroup. Also any other software can submit packets to this\n"
"\tgroup for the kernel to process.");
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b4ba0670dc54..97a511f4185d 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
(*assem) = pool_allocate(hw, *assem, length);
if (!(*assem)) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming data packet, dropped!\n");
+ ": no memory for incoming data packet, dropped!\n");
return;
}
(*assem)->protocol = protocol;
@@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
packet = pool_allocate(hw, NULL, length);
if (!packet) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming ctrl packet, dropped!\n");
+ ": no memory for incoming ctrl packet, dropped!\n");
return;
}
packet->protocol = protocol;
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-18 22:00:40 +0000