summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/Kconfig1
-rw-r--r--drivers/gpio/gpio-104-dio-48e.c4
-rw-r--r--drivers/gpio/gpio-bcm-kona.c4
-rw-r--r--drivers/gpio/gpio-zynq.c7
-rw-r--r--drivers/gpio/gpiolib-of.c1
-rw-r--r--drivers/gpio/gpiolib.c6
6 files changed, 16 insertions, 7 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 48da857f4774..a116609b1914 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -33,6 +33,7 @@ config ARCH_REQUIRE_GPIOLIB
menuconfig GPIOLIB
bool "GPIO Support"
+ select ANON_INODES
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index 1a647c07be67..fcf776971ca9 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -75,7 +75,7 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
const unsigned io_port = offset / 8;
- const unsigned control_port = io_port / 2;
+ const unsigned int control_port = io_port / 3;
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
unsigned long flags;
unsigned control;
@@ -115,7 +115,7 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
const unsigned io_port = offset / 8;
- const unsigned control_port = io_port / 2;
+ const unsigned int control_port = io_port / 3;
const unsigned mask = BIT(offset % 8);
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 9aabc48ff5de..953e4b829e32 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -547,11 +547,11 @@ static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
/* disable interrupts and clear status */
for (i = 0; i < kona_gpio->num_bank; i++) {
/* Unlock the entire bank first */
- bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE);
+ bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
/* Now re-lock the bank */
- bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE);
+ bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
}
}
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 75c6355b018d..e72794e463aa 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "input clock not found.\n");
return PTR_ERR(gpio->clk);
}
+ ret = clk_prepare_enable(gpio->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+ pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
@@ -747,6 +753,7 @@ err_pm_put:
pm_runtime_put(&pdev->dev);
err_pm_dis:
pm_runtime_disable(&pdev->dev);
+ clk_disable_unprepare(gpio->clk);
return ret;
}
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index d22dcc38179d..4aabddb38b59 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -16,6 +16,7 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/io-mapping.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 24f60d28f0c0..58d822d7e8da 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -449,7 +449,6 @@ static void gpiodevice_release(struct device *dev)
{
struct gpio_device *gdev = dev_get_drvdata(dev);
- cdev_del(&gdev->chrdev);
list_del(&gdev->list);
ida_simple_remove(&gpio_ida, gdev->id);
kfree(gdev->label);
@@ -482,7 +481,6 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
/* From this point, the .release() function cleans up gpio_device */
gdev->dev.release = gpiodevice_release;
- get_device(&gdev->dev);
pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
__func__, gdev->base, gdev->base + gdev->ngpio - 1,
dev_name(&gdev->dev), gdev->chip->label ? : "generic");
@@ -770,6 +768,8 @@ void gpiochip_remove(struct gpio_chip *chip)
* be removed, else it will be dangling until the last user is
* gone.
*/
+ cdev_del(&gdev->chrdev);
+ device_del(&gdev->dev);
put_device(&gdev->dev);
}
EXPORT_SYMBOL_GPL(gpiochip_remove);
@@ -869,7 +869,7 @@ struct gpio_chip *gpiochip_find(void *data,
spin_lock_irqsave(&gpio_lock, flags);
list_for_each_entry(gdev, &gpio_devices, list)
- if (match(gdev->chip, data))
+ if (gdev->chip && match(gdev->chip, data))
break;
/* No match? */