diff options
Diffstat (limited to 'drivers/watchdog')
| -rw-r--r-- | drivers/watchdog/sa1100_wdt.c | 88 |
1 files changed, 63 insertions, 25 deletions
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 27846c6bdfb0..2d0a06a158a8 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -22,6 +22,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/fs.h> +#include <linux/platform_device.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> @@ -30,17 +31,42 @@ #include <linux/uaccess.h> #include <linux/timex.h> -#ifdef CONFIG_ARCH_PXA -#include <mach/regs-ost.h> -#endif +#define REG_OSMR0 0x0000 /* OS timer Match Reg. 0 */ +#define REG_OSMR1 0x0004 /* OS timer Match Reg. 1 */ +#define REG_OSMR2 0x0008 /* OS timer Match Reg. 2 */ +#define REG_OSMR3 0x000c /* OS timer Match Reg. 3 */ +#define REG_OSCR 0x0010 /* OS timer Counter Reg. */ +#define REG_OSSR 0x0014 /* OS timer Status Reg. */ +#define REG_OWER 0x0018 /* OS timer Watch-dog Enable Reg. */ +#define REG_OIER 0x001C /* OS timer Interrupt Enable Reg. */ -#include <mach/reset.h> -#include <mach/hardware.h> +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ static unsigned long oscr_freq; static unsigned long sa1100wdt_users; static unsigned int pre_margin; static int boot_status; +static void __iomem *reg_base; + +static inline void sa1100_wr(u32 val, u32 offset) +{ + writel_relaxed(val, reg_base + offset); +} + +static inline u32 sa1100_rd(u32 offset) +{ + return readl_relaxed(reg_base + offset); +} /* * Allow only one person to hold it open @@ -51,10 +77,10 @@ static int sa1100dog_open(struct inode *inode, struct file *file) return -EBUSY; /* Activate SA1100 Watchdog timer */ - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); - writel_relaxed(OSSR_M3, OSSR); - writel_relaxed(OWER_WME, OWER); - writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); + sa1100_wr(OSSR_M3, REG_OSSR); + sa1100_wr(OWER_WME, REG_OWER); + sa1100_wr(sa1100_rd(REG_OIER) | OIER_E3, REG_OIER); return stream_open(inode, file); } @@ -62,7 +88,7 @@ static int sa1100dog_open(struct inode *inode, struct file *file) * The watchdog cannot be disabled. * * Previous comments suggested that turning off the interrupt by - * clearing OIER[E3] would prevent the watchdog timing out but this + * clearing REG_OIER[E3] would prevent the watchdog timing out but this * does not appear to be true (at least on the PXA255). */ static int sa1100dog_release(struct inode *inode, struct file *file) @@ -77,7 +103,7 @@ static ssize_t sa1100dog_write(struct file *file, const char __user *data, { if (len) /* Refresh OSMR3 timer. */ - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); return len; } @@ -111,7 +137,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_KEEPALIVE: - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); ret = 0; break; @@ -126,7 +152,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, } pre_margin = oscr_freq * time; - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); fallthrough; case WDIOC_GETTIMEOUT: @@ -152,12 +178,22 @@ static struct miscdevice sa1100dog_miscdev = { .fops = &sa1100dog_fops, }; -static int margin __initdata = 60; /* (secs) Default is 1 minute */ +static int margin = 60; /* (secs) Default is 1 minute */ static struct clk *clk; -static int __init sa1100dog_init(void) +static int sa1100dog_probe(struct platform_device *pdev) { int ret; + int *platform_data; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + reg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + ret = PTR_ERR_OR_ZERO(reg_base); + if (ret) + return ret; clk = clk_get(NULL, "OSTIMER0"); if (IS_ERR(clk)) { @@ -175,13 +211,9 @@ static int __init sa1100dog_init(void) oscr_freq = clk_get_rate(clk); - /* - * Read the reset status, and save it for later. If - * we suspend, RCSR will be cleared, and the watchdog - * reset reason will be lost. - */ - boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? - WDIOF_CARDRESET : 0; + platform_data = pdev->dev.platform_data; + if (platform_data && *platform_data) + boot_status = WDIOF_CARDRESET; pre_margin = oscr_freq * margin; ret = misc_register(&sa1100dog_miscdev); @@ -197,15 +229,21 @@ err: return ret; } -static void __exit sa1100dog_exit(void) +static int sa1100dog_remove(struct platform_device *pdev) { misc_deregister(&sa1100dog_miscdev); clk_disable_unprepare(clk); clk_put(clk); + + return 0; } -module_init(sa1100dog_init); -module_exit(sa1100dog_exit); +struct platform_driver sa1100dog_driver = { + .driver.name = "sa1100_wdt", + .probe = sa1100dog_probe, + .remove = sa1100dog_remove, +}; +module_platform_driver(sa1100dog_driver); MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>"); MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog"); |