diff options
Diffstat (limited to 'drivers/video')
24 files changed, 219 insertions, 217 deletions
diff --git a/drivers/video/fbdev/68328fb.c b/drivers/video/fbdev/68328fb.c index 3ccf46f8ffd0..07d6e8dc686b 100644 --- a/drivers/video/fbdev/68328fb.c +++ b/drivers/video/fbdev/68328fb.c @@ -124,7 +124,7 @@ static u_long get_line_length(int xres_virtual, int bpp) * First part, xxxfb_check_var, must not write anything * to hardware, it should only verify and adjust var. * This means it doesn't alter par but it does use hardware - * data from it to check this var. + * data from it to check this var. */ static int mc68x328fb_check_var(struct fb_var_screeninfo *var, @@ -182,7 +182,7 @@ static int mc68x328fb_check_var(struct fb_var_screeninfo *var, /* * Now that we checked it we alter var. The reason being is that the video - * mode passed in might not work but slight changes to it might make it + * mode passed in might not work but slight changes to it might make it * work. This way we let the user know what is acceptable. */ switch (var->bits_per_pixel) { @@ -257,8 +257,8 @@ static int mc68x328fb_check_var(struct fb_var_screeninfo *var, } /* This routine actually sets the video mode. It's in here where we - * the hardware state info->par and fix which can be affected by the - * change in par. For this driver it doesn't do much. + * the hardware state info->par and fix which can be affected by the + * change in par. For this driver it doesn't do much. */ static int mc68x328fb_set_par(struct fb_info *info) { @@ -295,7 +295,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * {hardwarespecific} contains width of RAMDAC * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) - * + * * Pseudocolor: * uses offset = 0 && length = RAMDAC register width. * var->{color}.offset is 0 @@ -384,7 +384,7 @@ static int mc68x328fb_pan_display(struct fb_var_screeninfo *var, } /* - * Most drivers don't need their own mmap function + * Most drivers don't need their own mmap function */ static int mc68x328fb_mmap(struct fb_info *info, struct vm_area_struct *vma) diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 96e91570cdd3..0fdf5f46802c 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -124,7 +124,7 @@ config FB_PROVIDE_GET_FB_UNMAPPED_AREA depends on FB help Allow generic frame-buffer to provide get_fb_unmapped_area - function. + function to provide shareable character device support on nommu. menuconfig FB_FOREIGN_ENDIAN bool "Framebuffer foreign endianness support" diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c index 45e64016db32..024d0ee4f04f 100644 --- a/drivers/video/fbdev/arcfb.c +++ b/drivers/video/fbdev/arcfb.c @@ -523,7 +523,7 @@ static int arcfb_probe(struct platform_device *dev) info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev); if (!info) - goto err; + goto err_fb_alloc; info->screen_base = (char __iomem *)videomemory; info->fbops = &arcfb_ops; @@ -535,7 +535,7 @@ static int arcfb_probe(struct platform_device *dev) if (!dio_addr || !cio_addr || !c2io_addr) { printk(KERN_WARNING "no IO addresses supplied\n"); - goto err1; + goto err_addr; } par->dio_addr = dio_addr; par->cio_addr = cio_addr; @@ -551,12 +551,12 @@ static int arcfb_probe(struct platform_device *dev) printk(KERN_INFO "arcfb: Failed req IRQ %d\n", par->irq); retval = -EBUSY; - goto err1; + goto err_addr; } } retval = register_framebuffer(info); if (retval < 0) - goto err1; + goto err_register_fb; platform_set_drvdata(dev, info); fb_info(info, "Arc frame buffer device, using %dK of video memory\n", videomemorysize >> 10); @@ -580,9 +580,12 @@ static int arcfb_probe(struct platform_device *dev) } return 0; -err1: + +err_register_fb: + free_irq(par->irq, info); +err_addr: framebuffer_release(info); -err: +err_fb_alloc: vfree(videomemory); return retval; } diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index 8187a7c4f910..987c5f5f0241 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -317,7 +317,7 @@ static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) /** * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory * @sinfo: the frame buffer to allocate memory for - * + * * This function is called only from the atmel_lcdfb_probe() * so no locking by fb_info->mm_lock around smem_len setting is needed. */ diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index b02e4e645035..cba2b113b28b 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -3498,11 +3498,6 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info, if (ret) goto atyfb_setup_generic_fail; #endif - if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN)) - par->clk_wr_offset = (inb(R_GENMO) & 0x0CU) >> 2; - else - par->clk_wr_offset = aty_ld_8(CLOCK_CNTL, par) & 0x03U; - /* according to ATI, we should use clock 3 for acelerated mode */ par->clk_wr_offset = 3; diff --git a/drivers/video/fbdev/cg14.c b/drivers/video/fbdev/cg14.c index a028ede39c12..832a82f45c80 100644 --- a/drivers/video/fbdev/cg14.c +++ b/drivers/video/fbdev/cg14.c @@ -512,7 +512,7 @@ static int cg14_probe(struct platform_device *op) is_8mb = (resource_size(&op->resource[1]) == (8 * 1024 * 1024)); BUILD_BUG_ON(sizeof(par->mmap_map) != sizeof(__cg14_mmap_map)); - + memcpy(&par->mmap_map, &__cg14_mmap_map, sizeof(par->mmap_map)); for (i = 0; i < CG14_MMAP_ENTRIES; i++) { diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c index 77dbf94aae5f..82eeb139c4eb 100644 --- a/drivers/video/fbdev/controlfb.c +++ b/drivers/video/fbdev/controlfb.c @@ -113,14 +113,14 @@ struct fb_info_control { struct fb_info info; struct fb_par_control par; u32 pseudo_palette[16]; - + struct cmap_regs __iomem *cmap_regs; unsigned long cmap_regs_phys; - + struct control_regs __iomem *control_regs; unsigned long control_regs_phys; unsigned long control_regs_size; - + __u8 __iomem *frame_buffer; unsigned long frame_buffer_phys; unsigned long fb_orig_base; @@ -196,7 +196,7 @@ static void set_control_clock(unsigned char *params) while (!req.complete) cuda_poll(); } -#endif +#endif } /* @@ -233,19 +233,19 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro if (p->par.xoffset != par->xoffset || p->par.yoffset != par->yoffset) set_screen_start(par->xoffset, par->yoffset, p); - + return; } - + p->par = *par; cmode = p->par.cmode; r = &par->regvals; - + /* Turn off display */ out_le32(CNTRL_REG(p,ctrl), 0x400 | par->ctrl); - + set_control_clock(r->clock_params); - + RADACAL_WRITE(0x20, r->radacal_ctrl); RADACAL_WRITE(0x21, p->control_use_bank2 ? 0 : 1); RADACAL_WRITE(0x10, 0); @@ -254,7 +254,7 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro rp = &p->control_regs->vswin; for (i = 0; i < 16; ++i, ++rp) out_le32(&rp->r, r->regs[i]); - + out_le32(CNTRL_REG(p,pitch), par->pitch); out_le32(CNTRL_REG(p,mode), r->mode); out_le32(CNTRL_REG(p,vram_attr), p->vram_attr); @@ -366,7 +366,7 @@ static int read_control_sense(struct fb_info_control *p) sense |= (in_le32(CNTRL_REG(p,mon_sense)) & 0x180) >> 7; out_le32(CNTRL_REG(p,mon_sense), 077); /* turn off drivers */ - + return sense; } @@ -558,9 +558,9 @@ static int control_var_to_par(struct fb_var_screeninfo *var, static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeninfo *var) { struct control_regints *rv; - + rv = (struct control_regints *) par->regvals.regs; - + memset(var, 0, sizeof(*var)); var->xres = par->xres; var->yres = par->yres; @@ -568,7 +568,7 @@ static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeni var->yres_virtual = par->vyres; var->xoffset = par->xoffset; var->yoffset = par->yoffset; - + switch(par->cmode) { default: case CMODE_8: @@ -634,7 +634,7 @@ static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *i err = control_var_to_par(var, &par, info); if (err) - return err; + return err; control_par_to_var(&par, var); return 0; @@ -655,7 +655,7 @@ static int controlfb_set_par (struct fb_info *info) " control_var_to_par: %d.\n", err); return err; } - + control_set_hardware(p, &par); info->fix.visual = (p->par.cmode == CMODE_8) ? @@ -840,7 +840,7 @@ static int __init init_control(struct fb_info_control *p) int full, sense, vmode, cmode, vyres; struct fb_var_screeninfo var; int rc; - + printk(KERN_INFO "controlfb: "); full = p->total_vram == 0x400000; diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index e808dc86001c..28739f1cb5e7 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -1468,7 +1468,7 @@ __releases(&info->lock) } #if defined(CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA) && !defined(CONFIG_MMU) -unsigned long get_fb_unmapped_area(struct file *filp, +static unsigned long get_fb_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c index 23cf8eba785d..f7e019dded0f 100644 --- a/drivers/video/fbdev/core/modedb.c +++ b/drivers/video/fbdev/core/modedb.c @@ -257,6 +257,11 @@ static const struct fb_videomode modedb[] = { { NULL, 72, 480, 300, 33386, 40, 24, 11, 19, 80, 3, 0, FB_VMODE_DOUBLE }, + /* 1920x1080 @ 60 Hz, 67.3 kHz hsync */ + { NULL, 60, 1920, 1080, 6734, 148, 88, 36, 4, 44, 5, 0, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED }, + /* 1920x1200 @ 60 Hz, 74.5 Khz hsync */ { NULL, 60, 1920, 1200, 5177, 128, 336, 1, 38, 208, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, diff --git a/drivers/video/fbdev/g364fb.c b/drivers/video/fbdev/g364fb.c index 05837a3b985c..c5b7673ddc6c 100644 --- a/drivers/video/fbdev/g364fb.c +++ b/drivers/video/fbdev/g364fb.c @@ -6,7 +6,7 @@ * * This driver is based on tgafb.c * - * Copyright (C) 1997 Geert Uytterhoeven + * Copyright (C) 1997 Geert Uytterhoeven * Copyright (C) 1995 Jay Estabrook * * This file is subject to the terms and conditions of the GNU General Public @@ -28,7 +28,7 @@ #include <asm/io.h> #include <asm/jazz.h> -/* +/* * Various defines for the G364 */ #define G364_MEM_BASE 0xe4400000 @@ -125,7 +125,7 @@ static const struct fb_ops g364fb_ops = { * * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag */ -static int g364fb_pan_display(struct fb_var_screeninfo *var, +static int g364fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { if (var->xoffset || diff --git a/drivers/video/fbdev/hgafb.c b/drivers/video/fbdev/hgafb.c index 20bdab738ab7..0af58018441d 100644 --- a/drivers/video/fbdev/hgafb.c +++ b/drivers/video/fbdev/hgafb.c @@ -1,6 +1,6 @@ /* * linux/drivers/video/hgafb.c -- Hercules graphics adaptor frame buffer device - * + * * Created 25 Nov 1999 by Ferenc Bakonyi (fero@drama.obuda.kando.hu) * Based on skeletonfb.c by Geert Uytterhoeven and * mdacon.c by Andrew Apted @@ -8,14 +8,14 @@ * History: * * - Revision 0.1.8 (23 Oct 2002): Ported to new framebuffer api. - * - * - Revision 0.1.7 (23 Jan 2001): fix crash resulting from MDA only cards + * + * - Revision 0.1.7 (23 Jan 2001): fix crash resulting from MDA only cards * being detected as Hercules. (Paul G.) * - Revision 0.1.6 (17 Aug 2000): new style structs * documentation * - Revision 0.1.5 (13 Mar 2000): spinlocks instead of saveflags();cli();etc * minor fixes - * - Revision 0.1.4 (24 Jan 2000): fixed a bug in hga_card_detect() for + * - Revision 0.1.4 (24 Jan 2000): fixed a bug in hga_card_detect() for * HGA-only systems * - Revision 0.1.3 (22 Jan 2000): modified for the new fb_info structure * screen is cleared after rmmod @@ -143,7 +143,7 @@ static bool nologo = 0; static void write_hga_b(unsigned int val, unsigned char reg) { - outb_p(reg, HGA_INDEX_PORT); + outb_p(reg, HGA_INDEX_PORT); outb_p(val, HGA_VALUE_PORT); } @@ -155,7 +155,7 @@ static void write_hga_w(unsigned int val, unsigned char reg) static int test_hga_b(unsigned char val, unsigned char reg) { - outb_p(reg, HGA_INDEX_PORT); + outb_p(reg, HGA_INDEX_PORT); outb (val, HGA_VALUE_PORT); udelay(20); val = (inb_p(HGA_VALUE_PORT) == val); return val; @@ -244,7 +244,7 @@ static void hga_show_logo(struct fb_info *info) void __iomem *dest = hga_vram; char *logo = linux_logo_bw; int x, y; - + for (y = 134; y < 134 + 80 ; y++) * this needs some cleanup * for (x = 0; x < 10 ; x++) writeb(~*(logo++),(dest + HGA_ROWADDR(y) + x + 40)); @@ -255,7 +255,7 @@ static void hga_pan(unsigned int xoffset, unsigned int yoffset) { unsigned int base; unsigned long flags; - + base = (yoffset / 8) * 90 + xoffset; spin_lock_irqsave(&hga_reg_lock, flags); write_hga_w(base, 0x0c); /* start address */ @@ -310,7 +310,7 @@ static int hga_card_detect(void) /* Ok, there is definitely a card registering at the correct * memory location, so now we do an I/O port test. */ - + if (!test_hga_b(0x66, 0x0f)) /* cursor low register */ goto error; @@ -321,7 +321,7 @@ static int hga_card_detect(void) * bit of the status register is changing. This test lasts for * approximately 1/10th of a second. */ - + p_save = q_save = inb_p(HGA_STATUS_PORT) & HGA_STATUS_VSYNC; for (count=0; count < 50000 && p_save == q_save; count++) { @@ -329,7 +329,7 @@ static int hga_card_detect(void) udelay(2); } - if (p_save == q_save) + if (p_save == q_save) goto error; switch (inb_p(HGA_STATUS_PORT) & 0x70) { @@ -415,7 +415,7 @@ static int hgafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * @info:pointer to fb_info object containing info for current hga board * * This function looks only at xoffset, yoffset and the %FB_VMODE_YWRAP - * flag in @var. If input parameters are correct it calls hga_pan() to + * flag in @var. If input parameters are correct it calls hga_pan() to * program the hardware. @info->var is updated to the new values. * A zero is returned on success and %-EINVAL for failure. */ @@ -442,9 +442,9 @@ static int hgafb_pan_display(struct fb_var_screeninfo *var, * hgafb_blank - (un)blank the screen * @blank_mode:blanking method to use * @info:unused - * - * Blank the screen if blank_mode != 0, else unblank. - * Implements VESA suspend and powerdown modes on hardware that supports + * + * Blank the screen if blank_mode != 0, else unblank. + * Implements VESA suspend and powerdown modes on hardware that supports * disabling hsync/vsync: * @blank_mode == 2 means suspend vsync, * @blank_mode == 3 means suspend hsync, @@ -539,15 +539,15 @@ static const struct fb_ops hgafb_ops = { .fb_copyarea = hgafb_copyarea, .fb_imageblit = hgafb_imageblit, }; - + /* ------------------------------------------------------------------------- * * * Functions in fb_info - * + * * ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */ - + /* * Initialization */ diff --git a/drivers/video/fbdev/hpfb.c b/drivers/video/fbdev/hpfb.c index cdd44e5deafe..77fbff47b1a8 100644 --- a/drivers/video/fbdev/hpfb.c +++ b/drivers/video/fbdev/hpfb.c @@ -92,7 +92,7 @@ static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green, if (regno >= info->cmap.len) return 1; - + while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1); out_be16(fb_regs + 0x60ba, 0xff); @@ -143,7 +143,7 @@ static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr) out_8(fb_regs + WMOVE, fb_bitmask); } -static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) { topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY); } @@ -315,7 +315,7 @@ unmap_screen_base: return ret; } -/* +/* * Check that the secondary ID indicates that we have some hope of working with this * framebuffer. The catseye boards are pretty much like topcats and we can muddle through. */ @@ -323,7 +323,7 @@ unmap_screen_base: #define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \ || ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT)) -/* +/* * Initialise the framebuffer */ static int hpfb_dio_probe(struct dio_dev *d, const struct dio_device_id *ent) diff --git a/drivers/video/fbdev/i810/i810_dvt.c b/drivers/video/fbdev/i810/i810_dvt.c index b4b3670667ab..2082b5c92e8f 100644 --- a/drivers/video/fbdev/i810/i810_dvt.c +++ b/drivers/video/fbdev/i810/i810_dvt.c @@ -14,6 +14,7 @@ #include "i810_regs.h" #include "i810.h" +#include "i810_main.h" struct mode_registers std_modes[] = { /* 640x480 @ 60Hz */ @@ -276,7 +277,7 @@ void i810fb_fill_var_timings(struct fb_var_screeninfo *var) var->upper_margin = total - (yres + var->lower_margin + var->vsync_len); } -u32 i810_get_watermark(struct fb_var_screeninfo *var, +u32 i810_get_watermark(const struct fb_var_screeninfo *var, struct i810fb_par *par) { struct mode_registers *params = &par->regs; diff --git a/drivers/video/fbdev/imsttfb.c b/drivers/video/fbdev/imsttfb.c index bea45647184e..975dd682fae4 100644 --- a/drivers/video/fbdev/imsttfb.c +++ b/drivers/video/fbdev/imsttfb.c @@ -1347,7 +1347,7 @@ static const struct fb_ops imsttfb_ops = { .fb_ioctl = imsttfb_ioctl, }; -static void init_imstt(struct fb_info *info) +static int init_imstt(struct fb_info *info) { struct imstt_par *par = info->par; __u32 i, tmp, *ip, *end; @@ -1420,7 +1420,7 @@ static void init_imstt(struct fb_info *info) || !(compute_imstt_regvals(par, info->var.xres, info->var.yres))) { printk("imsttfb: %ux%ux%u not supported\n", info->var.xres, info->var.yres, info->var.bits_per_pixel); framebuffer_release(info); - return; + return -ENODEV; } sprintf(info->fix.id, "IMS TT (%s)", par->ramdac == IBM ? "IBM" : "TVP"); @@ -1456,12 +1456,13 @@ static void init_imstt(struct fb_info *info) if (register_framebuffer(info) < 0) { framebuffer_release(info); - return; + return -ENODEV; } tmp = (read_reg_le32(par->dc_regs, SSTATUS) & 0x0f00) >> 8; fb_info(info, "%s frame buffer; %uMB vram; chip version %u\n", info->fix.id, info->fix.smem_len >> 20, tmp); + return 0; } static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1529,10 +1530,10 @@ static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!par->cmap_regs) goto error; info->pseudo_palette = par->palette; - init_imstt(info); - - pci_set_drvdata(pdev, info); - return 0; + ret = init_imstt(info); + if (!ret) + pci_set_drvdata(pdev, info); + return ret; error: if (par->dc_regs) diff --git a/drivers/video/fbdev/macfb.c b/drivers/video/fbdev/macfb.c index 312e35c9aa6c..44ff860a3f37 100644 --- a/drivers/video/fbdev/macfb.c +++ b/drivers/video/fbdev/macfb.c @@ -339,7 +339,7 @@ static int civic_setpalette(unsigned int regno, unsigned int red, { unsigned long flags; int clut_status; - + local_irq_save(flags); /* Set the register address */ @@ -439,7 +439,7 @@ static int macfb_setcolreg(unsigned regno, unsigned red, unsigned green, * (according to the entries in the `var' structure). * Return non-zero for invalid regno. */ - + if (regno >= fb_info->cmap.len) return 1; @@ -548,7 +548,7 @@ static int __init macfb_init(void) return -ENODEV; macfb_setup(option); - if (!MACH_IS_MAC) + if (!MACH_IS_MAC) return -ENODEV; if (mac_bi_data.id == MAC_MODEL_Q630 || @@ -644,7 +644,7 @@ static int __init macfb_init(void) err = -EINVAL; goto fail_unmap; } - + /* * We take a wild guess that if the video physical address is * in nubus slot space, that the nubus card is driving video. @@ -774,7 +774,7 @@ static int __init macfb_init(void) civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; - + /* * Assorted weirdos * We think this may be like the LC II diff --git a/drivers/video/fbdev/maxinefb.c b/drivers/video/fbdev/maxinefb.c index ae1a42bcb0ea..4e6b05232ae2 100644 --- a/drivers/video/fbdev/maxinefb.c +++ b/drivers/video/fbdev/maxinefb.c @@ -138,7 +138,7 @@ int __init maxinefb_init(void) *(volatile unsigned char *)fboff = 0x0; maxinefb_fix.smem_start = fb_start; - + /* erase hardware cursor */ for (i = 0; i < 512; i++) { maxinefb_ims332_write_register(IMS332_REG_CURSOR_RAM + i, diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c index 1eaa35c27835..477789cff8e0 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c @@ -491,7 +491,8 @@ static int tpo_td043_probe(struct spi_device *spi) ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc"); if (IS_ERR(ddata->vcc_reg)) { - r = dev_err_probe(&spi->dev, r, "failed to get LCD VCC regulator\n"); + r = dev_err_probe(&spi->dev, PTR_ERR(ddata->vcc_reg), + "failed to get LCD VCC regulator\n"); goto err_regulator; } diff --git a/drivers/video/fbdev/p9100.c b/drivers/video/fbdev/p9100.c index 3e44f9516318..0876962c52eb 100644 --- a/drivers/video/fbdev/p9100.c +++ b/drivers/video/fbdev/p9100.c @@ -65,7 +65,7 @@ static const struct fb_ops p9100_ops = { #define P9100_FB_OFF 0x0UL /* 3 bits: 2=8bpp 3=16bpp 5=32bpp 7=24bpp */ -#define SYS_CONFIG_PIXELSIZE_SHIFT 26 +#define SYS_CONFIG_PIXELSIZE_SHIFT 26 #define SCREENPAINT_TIMECTL1_ENABLE_VIDEO 0x20 /* 0 = off, 1 = on */ @@ -110,7 +110,7 @@ struct p9100_regs { u32 vram_xxx[25]; /* Registers for IBM RGB528 Palette */ - u32 ramdac_cmap_wridx; + u32 ramdac_cmap_wridx; u32 ramdac_palette_data; u32 ramdac_pixel_mask; u32 ramdac_palette_rdaddr; diff --git a/drivers/video/fbdev/platinumfb.c b/drivers/video/fbdev/platinumfb.c index 82f019f0a0d6..f8283fcd5edb 100644 --- a/drivers/video/fbdev/platinumfb.c +++ b/drivers/video/fbdev/platinumfb.c @@ -52,17 +52,17 @@ struct fb_info_platinum { __u8 red, green, blue; } palette[256]; u32 pseudo_palette[16]; - + volatile struct cmap_regs __iomem *cmap_regs; unsigned long cmap_regs_phys; - + volatile struct platinum_regs __iomem *platinum_regs; unsigned long platinum_regs_phys; - + __u8 __iomem *frame_buffer; volatile __u8 __iomem *base_frame_buffer; unsigned long frame_buffer_phys; - + unsigned long total_vram; int clktype; int dactype; @@ -133,7 +133,7 @@ static int platinumfb_set_par (struct fb_info *info) platinum_set_hardware(pinfo); init = platinum_reg_init[pinfo->vmode-1]; - + if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8)) offset = 0x10; @@ -214,7 +214,7 @@ static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, break; } } - + return 0; } @@ -269,7 +269,7 @@ static void platinum_set_hardware(struct fb_info_platinum *pinfo) struct platinum_regvals *init; int i; int vmode, cmode; - + vmode = pinfo->vmode; cmode = pinfo->cmode; @@ -436,7 +436,7 @@ static int read_platinum_sense(struct fb_info_platinum *info) * This routine takes a user-supplied var, and picks the best vmode/cmode from it. * It also updates the var structure to the actual mode data obtained */ -static int platinum_var_to_par(struct fb_var_screeninfo *var, +static int platinum_var_to_par(struct fb_var_screeninfo *var, struct fb_info_platinum *pinfo, int check_only) { @@ -478,12 +478,12 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var, pinfo->yoffset = 0; pinfo->vxres = pinfo->xres; pinfo->vyres = pinfo->yres; - + return 0; } -/* +/* * Parse user specified options (`video=platinumfb:') */ static int __init platinumfb_setup(char *options) @@ -624,7 +624,7 @@ static int platinumfb_probe(struct platform_device* odev) break; } dev_set_drvdata(&odev->dev, info); - + rc = platinum_init_fb(info); if (rc != 0) { iounmap(pinfo->frame_buffer); @@ -640,9 +640,9 @@ static void platinumfb_remove(struct platform_device* odev) { struct fb_info *info = dev_get_drvdata(&odev->dev); struct fb_info_platinum *pinfo = info->par; - + unregister_framebuffer (info); - + /* Unmap frame buffer and registers */ iounmap(pinfo->frame_buffer); iounmap(pinfo->platinum_regs); @@ -656,7 +656,7 @@ static void platinumfb_remove(struct platform_device* odev) framebuffer_release(info); } -static struct of_device_id platinumfb_match[] = +static struct of_device_id platinumfb_match[] = { { .name = "platinum", @@ -664,7 +664,7 @@ static struct of_device_id platinumfb_match[] = {}, }; -static struct platform_driver platinum_driver = +static struct platform_driver platinum_driver = { .driver = { .name = "platinumfb", diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c index b1b8ccdbac4a..a2408bf00ca0 100644 --- a/drivers/video/fbdev/sa1100fb.c +++ b/drivers/video/fbdev/sa1100fb.c @@ -57,14 +57,14 @@ * - Driver appears to be working for Brutus 320x200x8bpp mode. Other * resolutions are working, but only the 8bpp mode is supported. * Changes need to be made to the palette encode and decode routines - * to support 4 and 16 bpp modes. + * to support 4 and 16 bpp modes. * Driver is not designed to be a module. The FrameBuffer is statically - * allocated since dynamic allocation of a 300k buffer cannot be - * guaranteed. + * allocated since dynamic allocation of a 300k buffer cannot be + * guaranteed. * * 1999/06/17: * - FrameBuffer memory is now allocated at run-time when the - * driver is initialized. + * driver is initialized. * * 2000/04/10: Nicolas Pitre <nico@fluxnic.net> * - Big cleanup for dynamic selection of machine type at run time. @@ -74,8 +74,8 @@ * * 2000/08/07: Tak-Shing Chan <tchan.rd@idthk.com> * Jeff Sutherland <jsutherland@accelent.com> - * - Resolved an issue caused by a change made to the Assabet's PLD - * earlier this year which broke the framebuffer driver for newer + * - Resolved an issue caused by a change made to the Assabet's PLD + * earlier this year which broke the framebuffer driver for newer * Phase 4 Assabets. Some other parameters were changed to optimize * for the Sharp display. * @@ -102,7 +102,7 @@ * 2000/11/23: Eric Peng <ericpeng@coventive.com> * - Freebird add * - * 2001/02/07: Jamey Hicks <jamey.hicks@compaq.com> + * 2001/02/07: Jamey Hicks <jamey.hicks@compaq.com> * Cliff Brake <cbrake@accelent.com> * - Added PM callback * @@ -500,7 +500,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con, * the shortest recovery time * Suspend * This refers to a level of power management in which substantial power - * reduction is achieved by the display. The display can have a longer + * reduction is achieved by the display. The display can have a longer * recovery time from this state than from the Stand-by state * Off * This indicates that the display is consuming the lowest level of power @@ -522,9 +522,9 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con, */ /* * sa1100fb_blank(): - * Blank the display by setting all palette values to zero. Note, the + * Blank the display by setting all palette values to zero. Note, the * 12 and 16 bpp modes don't really use the palette, so this will not - * blank the display in all modes. + * blank the display in all modes. */ static int sa1100fb_blank(int blank, struct fb_info *info) { @@ -603,8 +603,8 @@ static inline unsigned int get_pcd(struct sa1100fb_info *fbi, /* * sa1100fb_activate_var(): - * Configures LCD Controller based on entries in var parameter. Settings are - * only written to the controller if changes were made. + * Configures LCD Controller based on entries in var parameter. Settings are + * only written to the controller if changes were made. */ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *fbi) { @@ -747,7 +747,7 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) * * SA1110 spec update nr. 25 says we can and should * clear LDD15 to 12 for 4 or 8bpp modes with active - * panels. + * panels. */ if ((fbi->reg_lccr0 & LCCR0_CMS) == LCCR0_Color && (fbi->reg_lccr0 & (LCCR0_Dual|LCCR0_Act)) != 0) { @@ -1020,9 +1020,9 @@ static int sa1100fb_resume(struct platform_device *dev) /* * sa1100fb_map_video_memory(): - * Allocates the DRAM memory for the frame buffer. This buffer is - * remapped into a non-cached, non-buffered, memory region to - * allow palette and pixel writes to occur without flushing the + * Allocates the DRAM memory for the frame buffer. This buffer is + * remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the * cache. Once this area is remapped, all virtual memory * access to the video memory should occur at the new region. */ diff --git a/drivers/video/fbdev/stifb.c b/drivers/video/fbdev/stifb.c index ef8a4c5fc687..686a234f3899 100644 --- a/drivers/video/fbdev/stifb.c +++ b/drivers/video/fbdev/stifb.c @@ -1,11 +1,11 @@ /* - * linux/drivers/video/stifb.c - - * Low level Frame buffer driver for HP workstations with + * linux/drivers/video/stifb.c - + * Low level Frame buffer driver for HP workstations with * STI (standard text interface) video firmware. * * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de> * Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de> - * + * * Based on: * - linux/drivers/video/artistfb.c -- Artist frame buffer driver * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> @@ -14,7 +14,7 @@ * - HP Xhp cfb-based X11 window driver for XFree86 * (c)Copyright 1992 Hewlett-Packard Co. * - * + * * The following graphics display devices (NGLE family) are supported by this driver: * * HPA4070A known as "HCRX", a 1280x1024 color device with 8 planes @@ -30,7 +30,7 @@ * supports 1280x1024 color displays with 8 planes. * HP710G same as HP710C, 1280x1024 grayscale only * HP710L same as HP710C, 1024x768 color only - * HP712 internal graphics support on HP9000s712 SPU, supports 640x480, + * HP712 internal graphics support on HP9000s712 SPU, supports 640x480, * 1024x768 or 1280x1024 color displays on 8 planes (Artist) * * This file is subject to the terms and conditions of the GNU General Public @@ -92,7 +92,7 @@ typedef struct { __s32 misc_video_end; } video_setup_t; -typedef struct { +typedef struct { __s16 sizeof_ngle_data; __s16 x_size_visible; /* visible screen dim in pixels */ __s16 y_size_visible; @@ -177,10 +177,10 @@ static int __initdata stifb_bpp_pref[MAX_STI_ROMS]; #endif /* DEBUG_STIFB_REGS */ -#define ENABLE 1 /* for enabling/disabling screen */ +#define ENABLE 1 /* for enabling/disabling screen */ #define DISABLE 0 -#define NGLE_LOCK(fb_info) do { } while (0) +#define NGLE_LOCK(fb_info) do { } while (0) #define NGLE_UNLOCK(fb_info) do { } while (0) static void @@ -198,9 +198,9 @@ SETUP_HW(struct stifb_info *fb) static void SETUP_FB(struct stifb_info *fb) -{ +{ unsigned int reg10_value = 0; - + SETUP_HW(fb); switch (fb->id) { @@ -210,15 +210,15 @@ SETUP_FB(struct stifb_info *fb) reg10_value = 0x13601000; break; case S9000_ID_A1439A: - if (fb->info.var.bits_per_pixel == 32) + if (fb->info.var.bits_per_pixel == 32) reg10_value = 0xBBA0A000; - else + else reg10_value = 0x13601000; break; case S9000_ID_HCRX: if (fb->info.var.bits_per_pixel == 32) reg10_value = 0xBBA0A000; - else + else reg10_value = 0x13602000; break; case S9000_ID_TIMBER: @@ -243,7 +243,7 @@ START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb) } static void -WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color) +WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color) { SETUP_HW(fb); WRITE_WORD(((0x100+index)<<2), fb, REG_3); @@ -251,30 +251,30 @@ WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color) } static void -FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb) -{ +FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb) +{ WRITE_WORD(0x400, fb, REG_2); if (fb->info.var.bits_per_pixel == 32) { WRITE_WORD(0x83000100, fb, REG_1); } else { if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG) WRITE_WORD(0x80000100, fb, REG_26); - else + else WRITE_WORD(0x80000100, fb, REG_1); } SETUP_FB(fb); } static void -SETUP_RAMDAC(struct stifb_info *fb) +SETUP_RAMDAC(struct stifb_info *fb) { SETUP_HW(fb); WRITE_WORD(0x04000000, fb, 0x1020); WRITE_WORD(0xff000000, fb, 0x1028); } -static void -CRX24_SETUP_RAMDAC(struct stifb_info *fb) +static void +CRX24_SETUP_RAMDAC(struct stifb_info *fb) { SETUP_HW(fb); WRITE_WORD(0x04000000, fb, 0x1000); @@ -286,14 +286,14 @@ CRX24_SETUP_RAMDAC(struct stifb_info *fb) } #if 0 -static void +static void HCRX_SETUP_RAMDAC(struct stifb_info *fb) { WRITE_WORD(0xffffffff, fb, REG_32); } #endif -static void +static void CRX24_SET_OVLY_MASK(struct stifb_info *fb) { SETUP_HW(fb); @@ -314,7 +314,7 @@ ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) WRITE_WORD(value, fb, 0x1038); } -static void +static void CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) { unsigned int value = enable ? 0x10000000 : 0x30000000; @@ -325,11 +325,11 @@ CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) } static void -ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) +ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) { u32 DregsMiscVideo = REG_21; u32 DregsMiscCtl = REG_27; - + SETUP_HW(fb); if (enable) { WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo); @@ -344,7 +344,7 @@ ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) (READ_BYTE(fb, REG_16b3) - 1) #define HYPER_CONFIG_PLANES_24 0x00000100 - + #define IS_24_DEVICE(fb) \ (fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24) @@ -470,15 +470,15 @@ SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber) } static void -SET_ATTR_SIZE(struct stifb_info *fb, int width, int height) +SET_ATTR_SIZE(struct stifb_info *fb, int width, int height) { - /* REG_6 seems to have special values when run on a + /* REG_6 seems to have special values when run on a RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or INTERNAL_EG_X1024). The values are: 0x2f0: internal (LCD) & external display enabled 0x2a0: external display only 0x000: zero on standard artist graphic cards - */ + */ WRITE_WORD(0x00000000, fb, REG_6); WRITE_WORD((width<<16) | height, fb, REG_9); WRITE_WORD(0x05000000, fb, REG_6); @@ -486,7 +486,7 @@ SET_ATTR_SIZE(struct stifb_info *fb, int width, int height) } static void -FINISH_ATTR_ACCESS(struct stifb_info *fb) +FINISH_ATTR_ACCESS(struct stifb_info *fb) { SETUP_HW(fb); WRITE_WORD(0x00000000, fb, REG_12); @@ -499,7 +499,7 @@ elkSetupPlanes(struct stifb_info *fb) SETUP_FB(fb); } -static void +static void ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber) { SETUP_ATTR_ACCESS(fb, BufferNumber); @@ -519,7 +519,7 @@ rattlerSetupPlanes(struct stifb_info *fb) * read mask register for overlay planes, not image planes). */ CRX24_SETUP_RAMDAC(fb); - + /* change fb->id temporarily to fool SETUP_FB() */ saved_id = fb->id; fb->id = CRX24_OVERLAY_PLANES; @@ -565,7 +565,7 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) lutBltCtl.all = 0x80000000; lutBltCtl.fields.length = length; - switch (fb->id) + switch (fb->id) { case S9000_ID_A1439A: /* CRX24 */ if (fb->var.bits_per_pixel == 8) { @@ -576,12 +576,12 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) lutBltCtl.fields.lutOffset = 0 * 256; } break; - + case S9000_ID_ARTIST: lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE; lutBltCtl.fields.lutOffset = 0 * 256; break; - + default: lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE; lutBltCtl.fields.lutOffset = 0; @@ -596,7 +596,7 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) #endif static NgleLutBltCtl -setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) +setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) { NgleLutBltCtl lutBltCtl; @@ -633,7 +633,7 @@ static void hyperUndoITE(struct stifb_info *fb) /* Hardware setup for full-depth write to "magic" location */ GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7); - NGLE_QUICK_SET_DST_BM_ACCESS(fb, + NGLE_QUICK_SET_DST_BM_ACCESS(fb, BA(IndexedDcd, Otc04, Ots08, AddrLong, BAJustPoint(0), BINovly, BAIndexBase(0))); NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, @@ -653,13 +653,13 @@ static void hyperUndoITE(struct stifb_info *fb) NGLE_UNLOCK(fb); } -static void +static void ngleDepth8_ClearImagePlanes(struct stifb_info *fb) { /* FIXME! */ } -static void +static void ngleDepth24_ClearImagePlanes(struct stifb_info *fb) { /* FIXME! */ @@ -675,7 +675,7 @@ ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg) NGLE_LOCK(fb); GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4); - NGLE_QUICK_SET_DST_BM_ACCESS(fb, + NGLE_QUICK_SET_DST_BM_ACCESS(fb, BA(IndexedDcd, Otc32, OtsIndirect, AddrLong, BAJustPoint(0), BINattr, BAIndexBase(0))); @@ -713,22 +713,22 @@ ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg) /**** Finally, set the Control Plane Register back to zero: ****/ GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1); NGLE_QUICK_SET_CTL_PLN_REG(fb, 0); - + NGLE_UNLOCK(fb); } - + static void ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data) { int nFreeFifoSlots = 0; u32 packed_dst; u32 packed_len; - + NGLE_LOCK(fb); /* Hardware setup */ GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8); - NGLE_QUICK_SET_DST_BM_ACCESS(fb, + NGLE_QUICK_SET_DST_BM_ACCESS(fb, BA(IndexedDcd, Otc04, Ots08, AddrLong, BAJustPoint(0), BINovly, BAIndexBase(0))); @@ -736,23 +736,23 @@ ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data) NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data); NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask); - + packed_dst = 0; packed_len = (fb->info.var.xres << 16) | fb->info.var.yres; NGLE_SET_DSTXY(fb, packed_dst); - - /* Write zeroes to overlay planes */ + + /* Write zeroes to overlay planes */ NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, IBOvals(RopSrc, MaskAddrOffset(0), BitmapExtent08, StaticReg(0), DataDynamic, MaskOtc, BGx(0), FGx(0))); - + SET_LENXY_START_RECFILL(fb, packed_len); NGLE_UNLOCK(fb); } -static void +static void hyperResetPlanes(struct stifb_info *fb, int enable) { unsigned int controlPlaneReg; @@ -783,7 +783,7 @@ hyperResetPlanes(struct stifb_info *fb, int enable) ngleClearOverlayPlanes(fb, 0xff, 255); /************************************************** - ** Also need to counteract ITE settings + ** Also need to counteract ITE settings **************************************************/ hyperUndoITE(fb); break; @@ -803,13 +803,13 @@ hyperResetPlanes(struct stifb_info *fb, int enable) ngleResetAttrPlanes(fb, controlPlaneReg); break; } - + NGLE_UNLOCK(fb); } /* Return pointer to in-memory structure holding ELK device-dependent ROM values. */ -static void +static void ngleGetDeviceRomData(struct stifb_info *fb) { #if 0 @@ -821,7 +821,7 @@ XXX: FIXME: !!! char *pCard8; int i; char *mapOrigin = NULL; - + int romTableIdx; pPackedDevRomData = fb->ngle_rom; @@ -888,7 +888,7 @@ SETUP_HCRX(struct stifb_info *fb) /* Initialize Hyperbowl registers */ GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7); - + if (IS_24_DEVICE(fb)) { hyperbowl = (fb->info.var.bits_per_pixel == 32) ? HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE : @@ -897,9 +897,9 @@ SETUP_HCRX(struct stifb_info *fb) /* First write to Hyperbowl must happen twice (bug) */ WRITE_WORD(hyperbowl, fb, REG_40); WRITE_WORD(hyperbowl, fb, REG_40); - + WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39); - + WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */ WRITE_WORD(0x404c4048, fb, REG_43); WRITE_WORD(0x034c0348, fb, REG_44); @@ -990,7 +990,7 @@ stifb_setcolreg(u_int regno, u_int red, u_int green, 0, /* Offset w/i LUT */ 256); /* Load entire LUT */ NGLE_BINC_SET_SRCADDR(fb, - NGLE_LONG_FB_ADDRESS(0, 0x100, 0)); + NGLE_LONG_FB_ADDRESS(0, 0x100, 0)); /* 0x100 is same as used in WRITE_IMAGE_COLOR() */ START_COLORMAPLOAD(fb, lutBltCtl.all); SETUP_FB(fb); @@ -1028,7 +1028,7 @@ stifb_blank(int blank_mode, struct fb_info *info) ENABLE_DISABLE_DISPLAY(fb, enable); break; } - + SETUP_FB(fb); return 0; } @@ -1114,15 +1114,15 @@ stifb_init_display(struct stifb_info *fb) /* HCRX specific initialization */ SETUP_HCRX(fb); - + /* if (id == S9000_ID_HCRX) hyperInitSprite(fb); else ngleInitSprite(fb); */ - - /* Initialize the image planes. */ + + /* Initialize the image planes. */ switch (id) { case S9000_ID_HCRX: hyperResetPlanes(fb, ENABLE); @@ -1194,7 +1194,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) fb = kzalloc(sizeof(*fb), GFP_ATOMIC); if (!fb) return -ENOMEM; - + info = &fb->info; /* set struct to a known state */ @@ -1235,7 +1235,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) dev_name, fb->id); goto out_err0; } - + /* default to 8 bpp on most graphic chips */ bpp = 8; xres = sti_onscreen_x(fb->sti); @@ -1256,7 +1256,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) fb->id = S9000_ID_A1659A; break; case S9000_ID_TIMBER: /* HP9000/710 Any (may be a grayscale device) */ - if (strstr(dev_name, "GRAYSCALE") || + if (strstr(dev_name, "GRAYSCALE") || strstr(dev_name, "Grayscale") || strstr(dev_name, "grayscale")) var->grayscale = 1; @@ -1295,16 +1295,16 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) case CRT_ID_VISUALIZE_EG: case S9000_ID_ARTIST: /* Artist */ break; - default: + default: #ifdef FALLBACK_TO_1BPP - printk(KERN_WARNING + printk(KERN_WARNING "stifb: Unsupported graphics card (id=0x%08x) " "- now trying 1bpp mode instead\n", fb->id); bpp = 1; /* default to 1 bpp */ break; #else - printk(KERN_WARNING + printk(KERN_WARNING "stifb: Unsupported graphics card (id=0x%08x) " "- skipping.\n", fb->id); @@ -1320,11 +1320,11 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8; if (!fix->line_length) fix->line_length = 2048; /* default */ - + /* limit fbsize to max visible screen size */ if (fix->smem_len > yres*fix->line_length) fix->smem_len = ALIGN(yres*fix->line_length, 4*1024*1024); - + fix->accel = FB_ACCEL_NONE; switch (bpp) { @@ -1350,7 +1350,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) default: break; } - + var->xres = var->xres_virtual = xres; var->yres = var->yres_virtual = yres; var->bits_per_pixel = bpp; @@ -1379,7 +1379,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) fix->smem_start, fix->smem_start+fix->smem_len); goto out_err2; } - + if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) { printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n", fix->mmio_start, fix->mmio_start+fix->mmio_len); @@ -1393,11 +1393,11 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) fb_info(&fb->info, "%s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n", fix->id, - var->xres, + var->xres, var->yres, var->bits_per_pixel, dev_name, - fb->id, + fb->id, fix->mmio_start); return 0; @@ -1413,6 +1413,7 @@ out_err1: iounmap(info->screen_base); out_err0: kfree(fb); + sti->info = NULL; return -ENXIO; } @@ -1426,7 +1427,7 @@ static int __init stifb_init(void) struct sti_struct *sti; struct sti_struct *def_sti; int i; - + #ifndef MODULE char *option = NULL; @@ -1438,7 +1439,7 @@ static int __init stifb_init(void) printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n"); return -ENXIO; } - + def_sti = sti_get_rom(0); if (def_sti) { for (i = 1; i <= MAX_STI_ROMS; i++) { @@ -1472,7 +1473,7 @@ stifb_cleanup(void) { struct sti_struct *sti; int i; - + for (i = 1; i <= MAX_STI_ROMS; i++) { sti = sti_get_rom(i); if (!sti) @@ -1495,10 +1496,10 @@ int __init stifb_setup(char *options) { int i; - + if (!options || !*options) return 1; - + if (strncmp(options, "off", 3) == 0) { stifb_disabled = 1; options += 3; diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index 216d49c9d47e..dabc30a09f96 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -27,6 +27,8 @@ #include <video/udlfb.h> #include "edid.h" +#define OUT_EP_NUM 1 /* The endpoint number we will use */ + static const struct fb_fix_screeninfo dlfb_fix = { .id = "udlfb", .type = FB_TYPE_PACKED_PIXELS, @@ -1541,24 +1543,16 @@ static const struct device_attribute fb_device_attrs[] = { static int dlfb_select_std_channel(struct dlfb_data *dlfb) { int ret; - void *buf; static const u8 set_def_chn[] = { 0x57, 0xCD, 0xDC, 0xA7, 0x1C, 0x88, 0x5E, 0x15, 0x60, 0xFE, 0xC6, 0x97, 0x16, 0x3D, 0x47, 0xF2 }; - buf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); - - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(dlfb->udev, usb_sndctrlpipe(dlfb->udev, 0), - NR_USB_REQUEST_CHANNEL, + ret = usb_control_msg_send(dlfb->udev, 0, NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - buf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); - - kfree(buf); + &set_def_chn, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); return ret; } @@ -1652,7 +1646,7 @@ static int dlfb_usb_probe(struct usb_interface *intf, struct fb_info *info; int retval; struct usb_device *usbdev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *out; + static u8 out_ep[] = {OUT_EP_NUM + USB_DIR_OUT, 0}; /* usb initialization */ dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL); @@ -1666,9 +1660,9 @@ static int dlfb_usb_probe(struct usb_interface *intf, dlfb->udev = usb_get_dev(usbdev); usb_set_intfdata(intf, dlfb); - retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL); - if (retval) { - dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n"); + if (!usb_check_bulk_endpoints(intf, out_ep)) { + dev_err(&intf->dev, "Invalid DisplayLink device!\n"); + retval = -EINVAL; goto error; } @@ -1927,7 +1921,8 @@ retry: } /* urb->transfer_buffer_length set to actual before submit */ - usb_fill_bulk_urb(urb, dlfb->udev, usb_sndbulkpipe(dlfb->udev, 1), + usb_fill_bulk_urb(urb, dlfb->udev, + usb_sndbulkpipe(dlfb->udev, OUT_EP_NUM), buf, size, dlfb_urb_completion, unode); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; diff --git a/drivers/video/fbdev/valkyriefb.c b/drivers/video/fbdev/valkyriefb.c index 1007023a5e88..b166b7cfe0e5 100644 --- a/drivers/video/fbdev/valkyriefb.c +++ b/drivers/video/fbdev/valkyriefb.c @@ -1,7 +1,7 @@ /* * valkyriefb.c -- frame buffer device for the PowerMac 'valkyrie' display * - * Created 8 August 1998 by + * Created 8 August 1998 by * Martin Costabel <costabel@wanadoo.fr> and Kevin Schoedel * * Vmode-switching changes and vmode 15/17 modifications created 29 August @@ -77,13 +77,13 @@ struct fb_info_valkyrie { struct fb_par_valkyrie par; struct cmap_regs __iomem *cmap_regs; unsigned long cmap_regs_phys; - + struct valkyrie_regs __iomem *valkyrie_regs; unsigned long valkyrie_regs_phys; - + __u8 __iomem *frame_buffer; unsigned long frame_buffer_phys; - + int sense; unsigned long total_vram; @@ -244,7 +244,7 @@ static inline int valkyrie_vram_reqd(int video_mode, int color_mode) { int pitch; struct valkyrie_regvals *init = valkyrie_reg_init[video_mode-1]; - + if ((pitch = init->pitch[color_mode]) == 0) pitch = 2 * init->pitch[0]; return init->vres * pitch; @@ -467,7 +467,7 @@ static int valkyrie_var_to_par(struct fb_var_screeninfo *var, printk(KERN_ERR "valkyriefb: vmode %d not valid.\n", vmode); return -EINVAL; } - + if (cmode != CMODE_8 && cmode != CMODE_16) { printk(KERN_ERR "valkyriefb: cmode %d not valid.\n", cmode); return -EINVAL; @@ -516,7 +516,7 @@ static void valkyrie_init_fix(struct fb_fix_screeninfo *fix, struct fb_info_valk fix->ywrapstep = 0; fix->ypanstep = 0; fix->xpanstep = 0; - + } /* Fix must already be inited above */ diff --git a/drivers/video/fbdev/vfb.c b/drivers/video/fbdev/vfb.c index a94573997d15..6f1990969361 100644 --- a/drivers/video/fbdev/vfb.c +++ b/drivers/video/fbdev/vfb.c @@ -111,7 +111,7 @@ static u_long get_line_length(int xres_virtual, int bpp) * First part, xxxfb_check_var, must not write anything * to hardware, it should only verify and adjust var. * This means it doesn't alter par but it does use hardware - * data from it to check this var. + * data from it to check this var. */ static int vfb_check_var(struct fb_var_screeninfo *var, @@ -169,7 +169,7 @@ static int vfb_check_var(struct fb_var_screeninfo *var, /* * Now that we checked it we alter var. The reason being is that the video - * mode passed in might not work but slight changes to it might make it + * mode passed in might not work but slight changes to it might make it * work. This way we let the user know what is acceptable. */ switch (var->bits_per_pixel) { @@ -235,8 +235,8 @@ static int vfb_check_var(struct fb_var_screeninfo *var, } /* This routine actually sets the video mode. It's in here where we - * the hardware state info->par and fix which can be affected by the - * change in par. For this driver it doesn't do much. + * the hardware state info->par and fix which can be affected by the + * change in par. For this driver it doesn't do much. */ static int vfb_set_par(struct fb_info *info) { @@ -379,7 +379,7 @@ static int vfb_pan_display(struct fb_var_screeninfo *var, } /* - * Most drivers don't need their own mmap function + * Most drivers don't need their own mmap function */ static int vfb_mmap(struct fb_info *info, |