diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 611 insertions, 140 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 47d75c20c211..1b68fed464cb 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1696,6 +1696,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c6077d582d29..f76b2e0aba9d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2251,7 +2251,7 @@ static int usb_enumerate_device_otg(struct usb_device *udev) /* descriptor may appear anywhere in config */ err = __usb_get_extra_descriptor(udev->rawdescriptors[0], le16_to_cpu(udev->config[0].desc.wTotalLength), - USB_DT_OTG, (void **) &desc); + USB_DT_OTG, (void **) &desc, sizeof(*desc)); if (err || !(desc->bmAttributes & USB_OTG_HNP)) return 0; @@ -2794,6 +2794,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2849,7 +2850,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, USB_PORT_FEAT_C_BH_PORT_RESET); usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - usb_clear_port_feature(hub->hdev, port1, + + if (udev) + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); /* @@ -2885,11 +2888,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { - /* TRSTRCY = 10 ms; plus some extra */ if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); - else - msleep(10 + 40); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); @@ -5153,7 +5163,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* Handle notifying userspace about hub over-current events */ static void port_over_current_notify(struct usb_port *port_dev) { - static char *envp[] = { NULL, NULL, NULL }; + char *envp[3]; struct device *hub_dev; char *port_dev_path; @@ -5177,6 +5187,7 @@ static void port_over_current_notify(struct usb_port *port_dev) if (!envp[1]) goto exit; + envp[2] = NULL; kobject_uevent_env(&hub_dev->kobj, KOBJ_CHANGE, envp); kfree(envp[1]); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..514c5214ddb2 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -206,6 +209,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */ + { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, @@ -327,6 +333,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Midiman M-Audio Keystation 88es */ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* SanDisk Ultra Fit and Ultra Flair */ + { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -380,6 +390,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, @@ -391,6 +404,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair K70 LUX RGB */ + { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, @@ -411,6 +427,11 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Raydium Touchscreen */ + { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 79d8bd7a612e..4ebfbd737905 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -832,14 +832,14 @@ EXPORT_SYMBOL_GPL(usb_get_current_frame_number); */ int __usb_get_extra_descriptor(char *buffer, unsigned size, - unsigned char type, void **ptr) + unsigned char type, void **ptr, size_t minsize) { struct usb_descriptor_header *header; while (size >= sizeof(struct usb_descriptor_header)) { header = (struct usb_descriptor_header *)buffer; - if (header->bLength < 2) { + if (header->bLength < 2 || header->bLength > size) { printk(KERN_ERR "%s: bogus descriptor, type %d length %d\n", usbcore_name, @@ -848,7 +848,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, return -1; } - if (header->bDescriptorType == type) { + if (header->bDescriptorType == type && header->bLength >= minsize) { *ptr = header; return 0; } diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index d257c541e51b..7afc10872f1f 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -120,6 +120,7 @@ static int dwc2_pci_probe(struct pci_dev *pci, dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); if (!dwc2) { dev_err(dev, "couldn't allocate dwc2 device\n"); + ret = -ENOMEM; goto err; } diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index becfbb87f791..2f2048aa5fde 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1499,6 +1499,7 @@ static int dwc3_probe(struct platform_device *pdev) err5: dwc3_event_buffers_cleanup(dwc); + dwc3_ulpi_exit(dwc); err4: dwc3_free_scratch_buffers(dwc); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 1286076a8890..842795856bf4 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -283,8 +283,10 @@ err: static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *dwc = pci_get_drvdata(pci); + struct pci_dev *pdev = dwc->pci; - gpiod_remove_lookup_table(&platform_bytcr_gpios); + if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) + gpiod_remove_lookup_table(&platform_bytcr_gpios); #ifdef CONFIG_PM cancel_work_sync(&dwc->wakeup_work); #endif diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 679c12e14522..9f92ee03dde7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1081,7 +1081,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, - maxp - rem, false, 0, + maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); @@ -1125,7 +1125,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, - false, 0, req->request.stream_id, + false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); } else if (req->request.zero && req->request.length && @@ -1141,7 +1141,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, /* Now prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, - false, 0, req->request.stream_id, + false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); } else { @@ -1470,9 +1470,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) unsigned transfer_in_flight; unsigned started; - if (dep->flags & DWC3_EP_STALL) - return 0; - if (dep->number > 1) trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue); else @@ -1494,8 +1491,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { - if (!(dep->flags & DWC3_EP_STALL)) - return 0; ret = dwc3_send_clear_stall_ep_cmd(dep); if (ret) @@ -2259,7 +2254,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if ((req->zero || req->unaligned) && (trb->ctrl & DWC3_TRB_CTRL_HWO)) { + if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 3ada83d81bda..31e8bf3578c8 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -215,7 +215,6 @@ struct ffs_io_data { struct mm_struct *mm; struct work_struct work; - struct work_struct cancellation_work; struct usb_ep *ep; struct usb_request *req; @@ -1073,31 +1072,22 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } -static void ffs_aio_cancel_worker(struct work_struct *work) -{ - struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, - cancellation_work); - - ENTER(); - - usb_ep_dequeue(io_data->ep, io_data->req); -} - static int ffs_aio_cancel(struct kiocb *kiocb) { struct ffs_io_data *io_data = kiocb->private; - struct ffs_data *ffs = io_data->ffs; + struct ffs_epfile *epfile = kiocb->ki_filp->private_data; int value; ENTER(); - if (likely(io_data && io_data->ep && io_data->req)) { - INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker); - queue_work(ffs->io_completion_wq, &io_data->cancellation_work); - value = -EINPROGRESS; - } else { + spin_lock_irq(&epfile->ffs->eps_lock); + + if (likely(io_data && io_data->ep && io_data->req)) + value = usb_ep_dequeue(io_data->ep, io_data->req); + else value = -EINVAL; - } + + spin_unlock_irq(&epfile->ffs->eps_lock); return value; } diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 1000d864929c..737bd77a575d 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -401,12 +401,12 @@ done: static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; - struct usb_request *tmp; unsigned long flags; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); @@ -879,7 +879,7 @@ int gether_register_netdev(struct net_device *net) sa.sa_family = net->type; memcpy(sa.sa_data, dev->dev_mac, ETH_ALEN); rtnl_lock(); - status = dev_set_mac_address(net, &sa); + status = dev_set_mac_address(net, &sa, NULL); rtnl_unlock(); if (status) pr_warn("cannot set self ethernet address: %d\n", status); @@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; - struct usb_request *tmp; WARN_ON(!dev); if (!dev) @@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link) */ usb_ep_disable(link->in_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) { + while (!list_empty(&dev->tx_reqs)) { + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); list_del(&req->list); spin_unlock(&dev->req_lock); @@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link) usb_ep_disable(link->out_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del(&req->list); spin_unlock(&dev->req_lock); diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 3a16431da321..fcf13ef33b31 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void) { return machine_is_omap_innovator() || machine_is_omap_osk() + || machine_is_omap_palmte() || machine_is_sx1() /* No known omap7xx boards with vbus sense */ || cpu_is_omap7xx(); @@ -2041,7 +2042,7 @@ static inline int machine_without_vbus_sense(void) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { - int status = -ENODEV; + int status; struct omap_ep *ep; unsigned long flags; @@ -2079,6 +2080,7 @@ static int omap_udc_start(struct usb_gadget *g, goto done; } } else { + status = 0; if (can_pullup(udc)) pullup_enable(udc); else @@ -2593,9 +2595,22 @@ omap_ep_setup(char *name, u8 addr, u8 type, static void omap_udc_release(struct device *dev) { - complete(udc->done); + pullup_disable(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); + udc->transceiver = NULL; + } + omap_writew(0, UDC_SYSCON1); + remove_proc_file(); + if (udc->dc_clk) { + if (udc->clk_requested) + omap_udc_enable_clock(0); + clk_put(udc->hhc_clk); + clk_put(udc->dc_clk); + } + if (udc->done) + complete(udc->done); kfree(udc); - udc = NULL; } static int @@ -2627,6 +2642,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) udc->gadget.speed = USB_SPEED_UNKNOWN; udc->gadget.max_speed = USB_SPEED_FULL; udc->gadget.name = driver_name; + udc->gadget.quirk_ep_out_aligned_size = 1; udc->transceiver = xceiv; /* ep0 is special; put it right after the SETUP buffer */ @@ -2867,8 +2883,8 @@ bad_on_1710: udc->clr_halt = UDC_RESET_EP; /* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, - 0, driver_name, udc); + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2876,20 +2892,20 @@ bad_on_1710: } /* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - 0, "omap_udc pio", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); - goto cleanup2; + goto cleanup1; } #ifdef USE_ISO - status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - 0, "omap_udc iso", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); - goto cleanup3; + goto cleanup1; } #endif if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -2900,23 +2916,8 @@ bad_on_1710: } create_proc_file(); - status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, - omap_udc_release); - if (status) - goto cleanup4; - - return 0; - -cleanup4: - remove_proc_file(); - -#ifdef USE_ISO -cleanup3: - free_irq(pdev->resource[2].start, udc); -#endif - -cleanup2: - free_irq(pdev->resource[1].start, udc); + return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release); cleanup1: kfree(udc); @@ -2943,42 +2944,15 @@ static int omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done); - if (!udc) - return -ENODEV; - - usb_del_gadget_udc(&udc->gadget); - if (udc->driver) - return -EBUSY; - udc->done = &done; - pullup_disable(udc); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - usb_put_phy(udc->transceiver); - udc->transceiver = NULL; - } - omap_writew(0, UDC_SYSCON1); - - remove_proc_file(); - -#ifdef USE_ISO - free_irq(pdev->resource[3].start, udc); -#endif - free_irq(pdev->resource[2].start, udc); - free_irq(pdev->resource[1].start, udc); + usb_del_gadget_udc(&udc->gadget); - if (udc->dc_clk) { - if (udc->clk_requested) - omap_udc_enable_clock(0); - clk_put(udc->hhc_clk); - clk_put(udc->dc_clk); - } + wait_for_completion(&done); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); - wait_for_completion(&done); - return 0; } diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 684d6f074c3a..09a8ebd95588 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -640,7 +640,7 @@ static int hwahc_security_create(struct hwahc *hwahc) top = itr + itr_size; result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd); + USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); if (result == -1) { dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); return 0; diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c index 27f00160332e..3c4abb5a1c3f 100644 --- a/drivers/usb/host/xhci-histb.c +++ b/drivers/usb/host/xhci-histb.c @@ -325,14 +325,16 @@ static int xhci_histb_remove(struct platform_device *dev) struct xhci_hcd_histb *histb = platform_get_drvdata(dev); struct usb_hcd *hcd = histb->hcd; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_hcd *shared_hcd = xhci->shared_hcd; xhci->xhc_state |= XHCI_STATE_REMOVING; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; device_wakeup_disable(&dev->dev); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); xhci_histb_host_disable(histb); usb_put_hcd(hcd); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 12eea73d9f20..01b5818a4be5 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_SUSPEND; } if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status)) { + !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; @@ -921,7 +921,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, time_left = wait_for_completion_timeout( &bus_state->rexit_done[wIndex], msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT)); + XHCI_MAX_REXIT_TIMEOUT_MS)); spin_lock_irqsave(&xhci->lock, flags); if (time_left) { @@ -935,7 +935,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT, + XHCI_MAX_REXIT_TIMEOUT_MS, port_status); status |= USB_PORT_STAT_SUSPEND; clear_bit(wIndex, &bus_state->rexit_ports); @@ -1474,15 +1474,18 @@ int xhci_bus_suspend(struct usb_hcd *hcd) unsigned long flags; struct xhci_hub *rhub; struct xhci_port **ports; + u32 portsc_buf[USB_MAXCHILDREN]; + bool wake_enabled; rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; + wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (bus_state->resuming_ports || /* USB2 */ bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); @@ -1490,26 +1493,37 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return -EBUSY; } } - - port_index = max_ports; + /* + * Prepare ports for suspend, but don't write anything before all ports + * are checked and we know bus suspend can proceed + */ bus_state->bus_suspended = 0; + port_index = max_ports; while (port_index--) { - /* suspend the port if the port is not suspended */ u32 t1, t2; - int slot_id; t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); + portsc_buf[port_index] = 0; - if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port_index); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - port_index + 1); - if (slot_id) { + /* Bail out if a USB3 port has a new device in link training */ + if ((hcd->speed >= HCD_USB3) && + (t1 & PORT_PLS_MASK) == XDEV_POLLING) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); + return -EBUSY; + } + + /* suspend ports in U0, or bail out for new connect changes */ + if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { + if ((t1 & PORT_CSC) && wake_enabled) { + bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); - spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port connect change\n"); + return -EBUSY; } + xhci_dbg(xhci, "port %d not suspended\n", port_index); t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); @@ -1518,7 +1532,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; @@ -1538,7 +1552,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, ports[port_index]->addr); + portsc_buf[port_index] = t2; + } + + /* write port settings, stopping and suspending ports if needed */ + port_index = max_ports; + while (port_index--) { + if (!portsc_buf[port_index]) + continue; + if (test_bit(port_index, &bus_state->bus_suspended)) { + int slot_id; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + writel(portsc_buf[port_index], ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 71d0d33c3286..60987c787e44 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -590,12 +590,14 @@ static int xhci_mtk_remove(struct platform_device *dev) struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); struct usb_hcd *hcd = mtk->hcd; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_hcd *shared_hcd = xhci->shared_hcd; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; device_init_wakeup(&dev->dev, false); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); usb_put_hcd(hcd); xhci_mtk_sch_exit(mtk); xhci_mtk_clks_disable(mtk); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 01c57055c0c5..a9ec7051f286 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -139,6 +139,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || pdev->device == 0x15e1)) + xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH; @@ -248,6 +252,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; + if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || + pdev->vendor == PCI_VENDOR_ID_CAVIUM) && + pdev->device == 0x9026) + xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); @@ -380,6 +389,7 @@ static void xhci_pci_remove(struct pci_dev *dev) if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; } /* Workaround for spurious wakeups at shutdown with HSW */ diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 32b5574ad5c5..ef09cb06212f 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -362,14 +362,16 @@ static int xhci_plat_remove(struct platform_device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; struct clk *reg_clk = xhci->reg_clk; + struct usb_hcd *shared_hcd = xhci->shared_hcd; xhci->xhc_state |= XHCI_STATE_REMOVING; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); clk_disable_unprepare(clk); clk_disable_unprepare(reg_clk); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a8d92c90fb58..65750582133f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1521,6 +1521,35 @@ static void handle_device_notification(struct xhci_hcd *xhci, usb_wakeup_notification(udev->parent, udev->portnum); } +/* + * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI + * Controller. + * As per ThunderX2errata-129 USB 2 device may come up as USB 1 + * If a connection to a USB 1 device is followed by another connection + * to a USB 2 device. + * + * Reset the PHY after the USB device is disconnected if device speed + * is less than HCD_USB3. + * Retry the reset sequence max of 4 times checking the PLL lock status. + * + */ +static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci) +{ + struct usb_hcd *hcd = xhci_to_hcd(xhci); + u32 pll_lock_check; + u32 retry_count = 4; + + do { + /* Assert PHY reset */ + writel(0x6F, hcd->regs + 0x1048); + udelay(10); + /* De-assert the PHY reset */ + writel(0x7F, hcd->regs + 0x1048); + udelay(200); + pll_lock_check = readl(hcd->regs + 0x1070); + } while (!(pll_lock_check & 0x1) && --retry_count); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1556,6 +1585,13 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } + /* We might get interrupts after shared_hcd is removed */ + if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) { + xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n"); + bogus_port_status = true; + goto cleanup; + } + hcd = port->rhub->hcd; bus_state = &xhci->bus_state[hcd_index(hcd)]; hcd_portnum = port->hcd_portnum; @@ -1639,7 +1675,7 @@ static void handle_port_status(struct xhci_hcd *xhci, * RExit to a disconnect state). If so, let the the driver know it's * out of the RExit state. */ - if (!DEV_SUPERSPEED_ANY(portsc) && + if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 && test_and_clear_bit(hcd_portnum, &bus_state->rexit_ports)) { complete(&bus_state->rexit_done[hcd_portnum]); @@ -1647,8 +1683,12 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } - if (hcd->speed < HCD_USB3) + if (hcd->speed < HCD_USB3) { xhci_test_and_clear_bit(xhci, port, PORT_PLC); + if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) && + (portsc & PORT_CSC) && !(portsc & PORT_CONNECT)) + xhci_cavium_reset_phy_quirk(xhci); + } cleanup: /* Update event ring dequeue pointer before dropping the lock */ @@ -2266,6 +2306,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, goto cleanup; case COMP_RING_UNDERRUN: case COMP_RING_OVERRUN: + case COMP_STOPPED_LENGTH_INVALID: goto cleanup; default: xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n", diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 6b5db344de30..938ff06c0349 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1303,6 +1303,7 @@ static int tegra_xusb_remove(struct platform_device *pdev) usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; usb_remove_hcd(tegra->hcd); usb_put_hcd(tegra->hcd); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0420eefa647a..dae3be1b9c8f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -719,8 +719,6 @@ static void xhci_stop(struct usb_hcd *hcd) /* Only halt host and free memory after both hcds are removed */ if (!usb_hcd_is_primary_hcd(hcd)) { - /* usb core will free this hcd shortly, unset pointer */ - xhci->shared_hcd = NULL; mutex_unlock(&xhci->mutex); return; } @@ -970,6 +968,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) unsigned int delay = XHCI_MAX_HALT_USEC; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + u32 res; if (!hcd->state) return 0; @@ -1023,11 +1022,28 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) command = readl(&xhci->op_regs->command); command |= CMD_CSS; writel(command, &xhci->op_regs->command); + xhci->broken_suspend = 0; if (xhci_handshake(&xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { - xhci_warn(xhci, "WARN: xHC save state timeout\n"); - spin_unlock_irq(&xhci->lock); - return -ETIMEDOUT; + /* + * AMD SNPS xHC 3.0 occasionally does not clear the + * SSS bit of USBSTS and when driver tries to poll + * to see if the xHC clears BIT(8) which never happens + * and driver assumes that controller is not responding + * and times out. To workaround this, its good to check + * if SRE and HCE bits are not set (as per xhci + * Section 5.4.2) and bypass the timeout. + */ + res = readl(&xhci->op_regs->status); + if ((xhci->quirks & XHCI_SNPS_BROKEN_SUSPEND) && + (((res & STS_SRE) == 0) && + ((res & STS_HCE) == 0))) { + xhci->broken_suspend = 1; + } else { + xhci_warn(xhci, "WARN: xHC save state timeout\n"); + spin_unlock_irq(&xhci->lock); + return -ETIMEDOUT; + } } spin_unlock_irq(&xhci->lock); @@ -1080,7 +1096,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); spin_lock_irq(&xhci->lock); - if (xhci->quirks & XHCI_RESET_ON_RESUME) + if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend) hibernated = true; if (!hibernated) { @@ -4498,6 +4514,14 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + /* Prevent U1 if service interval is shorter than U1 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); else @@ -4554,6 +4578,14 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + /* Prevent U2 if service interval is shorter than U2 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); else diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index bf0b3692dc9a..011dd45f8718 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1680,7 +1680,7 @@ struct xhci_bus_state { * It can take up to 20 ms to transition from RExit to U0 on the * Intel Lynx Point LP xHCI host. */ -#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) +#define XHCI_MAX_REXIT_TIMEOUT_MS 20 static inline unsigned int hcd_index(struct usb_hcd *hcd) { @@ -1849,6 +1849,8 @@ struct xhci_hcd { #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) #define XHCI_ZERO_64B_REGS BIT_ULL(32) #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33) +#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) +#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) unsigned int num_active_eps; unsigned int limit_active_eps; @@ -1861,6 +1863,8 @@ struct xhci_hcd { unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; + /* Broken Suspend flag for SNPS Suspend resume issue */ + unsigned broken_suspend:1; /* cached usb2 extened protocol capabilites */ u32 *ext_caps; unsigned int num_ext_caps; diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index bd539f3058bc..39ca31b4de46 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -50,6 +50,8 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, + { APPLEDISPLAY_DEVICE(0x9222) }, + { APPLEDISPLAY_DEVICE(0x9226) }, { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 17940589c647..7d289302ff6c 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -101,7 +101,6 @@ static int usb_console_setup(struct console *co, char *options) cflag |= PARENB; break; } - co->cflag = cflag; /* * no need to check the index here: if the index is wrong, console @@ -164,6 +163,7 @@ static int usb_console_setup(struct console *co, char *options) serial->type->set_termios(tty, port, &dummy); tty_port_tty_set(&port->port, NULL); + tty_save_termios(tty); tty_kref_put(tty); } tty_port_set_initialized(&port->port, 1); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e24ff16d4147..1ce27f3ff7a7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1164,6 +1164,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */ + .driver_info = NCTRL(0) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, @@ -1328,6 +1332,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) }, /* GosunCn ZTE WeLink ME3630 (MBIM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), @@ -1531,6 +1536,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ .driver_info = RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, @@ -1758,6 +1764,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E), .driver_info = RSVD(5) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), @@ -1940,7 +1947,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) }, /* HP lt4132 (Huawei ME906s-158) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, + { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ + .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h index d17cd95b55bb..6b2140f966ef 100644 --- a/drivers/usb/storage/unusual_realtek.h +++ b/drivers/usb/storage/unusual_realtek.h @@ -27,4 +27,14 @@ UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999, "USB Card Reader", USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), +UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + #endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */ diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c index c84c8c189e90..1c0033ad8738 100644 --- a/drivers/usb/typec/tps6598x.c +++ b/drivers/usb/typec/tps6598x.c @@ -501,19 +501,19 @@ static int tps6598x_remove(struct i2c_client *client) return 0; } -static const struct acpi_device_id tps6598x_acpi_match[] = { - { "INT3515", 0 }, +static const struct i2c_device_id tps6598x_id[] = { + { "tps6598x" }, { } }; -MODULE_DEVICE_TABLE(acpi, tps6598x_acpi_match); +MODULE_DEVICE_TABLE(i2c, tps6598x_id); static struct i2c_driver tps6598x_i2c_driver = { .driver = { .name = "tps6598x", - .acpi_match_table = tps6598x_acpi_match, }, .probe_new = tps6598x_probe, .remove = tps6598x_remove, + .id_table = tps6598x_id, }; module_i2c_driver(tps6598x_i2c_driver); diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig index e36d6c73c4a4..78118883f96c 100644 --- a/drivers/usb/typec/ucsi/Kconfig +++ b/drivers/usb/typec/ucsi/Kconfig @@ -23,6 +23,16 @@ config TYPEC_UCSI if TYPEC_UCSI +config UCSI_CCG + tristate "UCSI Interface Driver for Cypress CCGx" + depends on I2C + help + This driver enables UCSI support on platforms that expose a + Cypress CCGx Type-C controller over I2C interface. + + To compile the driver as a module, choose M here: the module will be + called ucsi_ccg. + config UCSI_ACPI tristate "UCSI ACPI Interface Driver" depends on ACPI diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile index 7afbea512207..2f4900b26210 100644 --- a/drivers/usb/typec/ucsi/Makefile +++ b/drivers/usb/typec/ucsi/Makefile @@ -8,3 +8,5 @@ typec_ucsi-y := ucsi.o typec_ucsi-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o + +obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c new file mode 100644 index 000000000000..de8a43bdff68 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI driver for Cypress CCGx Type-C controller + * + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta <ajayg@nvidia.com> + * + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c + */ +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#include <asm/unaligned.h> +#include "ucsi.h" + +struct ucsi_ccg { + struct device *dev; + struct ucsi *ucsi; + struct ucsi_ppm ppm; + struct i2c_client *client; +}; + +#define CCGX_RAB_INTR_REG 0x06 +#define CCGX_RAB_UCSI_CONTROL 0x39 +#define CCGX_RAB_UCSI_CONTROL_START BIT(0) +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1) +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff)) + +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + const struct i2c_adapter_quirks *quirks = client->adapter->quirks; + unsigned char buf[2]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + .len = sizeof(buf), + .buf = buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = data, + }, + }; + u32 rlen, rem_len = len, max_read_len = len; + int status; + + /* check any max_read_len limitation on i2c adapter */ + if (quirks && quirks->max_read_len) + max_read_len = quirks->max_read_len; + + while (rem_len > 0) { + msgs[1].buf = &data[len - rem_len]; + rlen = min_t(u16, rem_len, max_read_len); + msgs[1].len = rlen; + put_unaligned_le16(rab, buf); + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + return status; + } + rab += rlen; + rem_len -= rlen; + } + + return 0; +} + +static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + unsigned char *buf; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + } + }; + int status; + + buf = kzalloc(len + sizeof(rab), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + put_unaligned_le16(rab, buf); + memcpy(buf + sizeof(rab), data, len); + + msgs[0].len = len + sizeof(rab); + msgs[0].buf = buf; + + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + kfree(buf); + return status; + } + + kfree(buf); + return 0; +} + +static int ucsi_ccg_init(struct ucsi_ccg *uc) +{ + unsigned int count = 10; + u8 data; + int status; + + data = CCGX_RAB_UCSI_CONTROL_STOP; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + data = CCGX_RAB_UCSI_CONTROL_START; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + /* + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control + * register write will push response which must be cleared. + */ + do { + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + if (!data) + return 0; + + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + usleep_range(10000, 11000); + } while (--count); + + return -ETIMEDOUT; +} + +static int ucsi_ccg_send_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out)); + status = ccg_write(uc, rab, ppm + + offsetof(struct ucsi_data, message_out), + sizeof(uc->ppm.data->message_out)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl)); + return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl), + sizeof(uc->ppm.data->ctrl)); +} + +static int ucsi_ccg_recv_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci)); + status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci), + sizeof(uc->ppm.data->cci)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in)); + return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in), + sizeof(uc->ppm.data->message_in)); +} + +static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc) +{ + int status; + unsigned char data; + + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); +} + +static int ucsi_ccg_sync(struct ucsi_ppm *ppm) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + int status; + + status = ucsi_ccg_recv_data(uc); + if (status < 0) + return status; + + /* ack interrupt to allow next command to run */ + return ucsi_ccg_ack_interrupt(uc); +} + +static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + + ppm->data->ctrl.raw_cmd = ctrl->raw_cmd; + return ucsi_ccg_send_data(uc); +} + +static irqreturn_t ccg_irq_handler(int irq, void *data) +{ + struct ucsi_ccg *uc = data; + + ucsi_notify(uc->ucsi); + + return IRQ_HANDLED; +} + +static int ucsi_ccg_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ucsi_ccg *uc; + int status; + u16 rab; + + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL); + if (!uc) + return -ENOMEM; + + uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL); + if (!uc->ppm.data) + return -ENOMEM; + + uc->ppm.cmd = ucsi_ccg_cmd; + uc->ppm.sync = ucsi_ccg_sync; + uc->dev = dev; + uc->client = client; + + /* reset ccg device and initialize ucsi */ + status = ucsi_ccg_init(uc); + if (status < 0) { + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status); + return status; + } + + status = devm_request_threaded_irq(dev, client->irq, NULL, + ccg_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + dev_name(dev), uc); + if (status < 0) { + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status); + return status; + } + + uc->ucsi = ucsi_register_ppm(dev, &uc->ppm); + if (IS_ERR(uc->ucsi)) { + dev_err(uc->dev, "ucsi_register_ppm failed\n"); + return PTR_ERR(uc->ucsi); + } + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version)); + status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) + + offsetof(struct ucsi_data, version), + sizeof(uc->ppm.data->version)); + if (status < 0) { + ucsi_unregister_ppm(uc->ucsi); + return status; + } + + i2c_set_clientdata(client, uc); + return 0; +} + +static int ucsi_ccg_remove(struct i2c_client *client) +{ + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + ucsi_unregister_ppm(uc->ucsi); + + return 0; +} + +static const struct i2c_device_id ucsi_ccg_device_id[] = { + {"ccgx-ucsi", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id); + +static struct i2c_driver ucsi_ccg_driver = { + .driver = { + .name = "ucsi_ccg", + }, + .probe = ucsi_ccg_probe, + .remove = ucsi_ccg_remove, + .id_table = ucsi_ccg_device_id, +}; + +module_i2c_driver(ucsi_ccg_driver); + +MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>"); +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 68ddee86a886..edb7263bff40 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -316,7 +316,7 @@ ssize_t wusb_prf(void *out, size_t out_size, goto error_setkey_cbc; } - tfm_aes = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); + tfm_aes = crypto_alloc_cipher("aes", 0, 0); if (IS_ERR(tfm_aes)) { result = PTR_ERR(tfm_aes); printk(KERN_ERR "E: can't load AES: %d\n", (int)result); |