diff options
Diffstat (limited to 'drivers/usb')
202 files changed, 7227 insertions, 3406 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 81aac7f4ca59..6a58cb1330c1 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -21,6 +21,7 @@ config USB_ARCH_HAS_HCD default y if USB_ARCH_HAS_EHCI default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 + default y if BLACKFIN # SL-811 default y if SUPERH # r8a66597-hcd default PCI @@ -39,6 +40,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB default y if ARCH_W90X900 + default y if ARCH_DAVINCI_DA8XX # PPC: default y if STB03xxx default y if PPC_MPC52xx @@ -61,7 +63,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_W90X900 default y if ARCH_AT91SAM9G45 default y if ARCH_MXC - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index be3c9b80bc9f..80b4008c89ba 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ obj-$(CONFIG_USB_HWA_HCD) += host/ obj-$(CONFIG_USB_ISP1760_HCD) += host/ +obj-$(CONFIG_USB_IMX21_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 56802d2e994b..c89990f5e018 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -5,6 +5,7 @@ * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru) * Copyright (C) 2007 Simon Arlott + * Copyright (C) 2009 Simon Arlott * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -43,7 +44,7 @@ #include "usbatm.h" #define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott" -#define DRIVER_VERSION "0.3" +#define DRIVER_VERSION "0.4" #define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver" static const char cxacru_driver_name[] = "cxacru"; @@ -52,6 +53,7 @@ static const char cxacru_driver_name[] = "cxacru"; #define CXACRU_EP_DATA 0x02 /* Bulk in/out */ #define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */ +#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2) /* Addresses */ #define PLLFCLK_ADDR 0x00350068 @@ -105,6 +107,26 @@ enum cxacru_cm_request { CM_REQUEST_MAX, }; +/* commands for interaction with the flash memory + * + * read: response is the contents of the first 60 bytes of flash memory + * write: request contains the 60 bytes of data to write to flash memory + * response is the contents of the first 60 bytes of flash memory + * + * layout: PP PP VV VV MM MM MM MM MM MM ?? ?? SS SS SS SS SS SS SS SS + * SS SS SS SS SS SS SS SS 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * + * P: le16 USB Product ID + * V: le16 USB Vendor ID + * M: be48 MAC Address + * S: le16 ASCII Serial Number + */ +enum cxacru_cm_flash { + CM_FLASH_READ = 0xa1, + CM_FLASH_WRITE = 0xa2 +}; + /* reply codes to the commands above */ enum cxacru_cm_status { CM_STATUS_UNDEFINED, @@ -196,23 +218,32 @@ static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL) static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \ cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name) +#define CXACRU_SET_INIT(_name) \ +static DEVICE_ATTR(_name, S_IWUSR, \ + NULL, cxacru_sysfs_store_##_name) + #define CXACRU_ATTR_INIT(_value, _type, _name) \ static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); \ - struct cxacru_data *instance = usbatm_instance->driver_data; \ + struct cxacru_data *instance = to_usbatm_driver_data(\ + to_usb_interface(dev)); \ +\ + if (instance == NULL) \ + return -ENODEV; \ +\ return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \ } \ CXACRU__ATTR_INIT(_name) #define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) +#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name) #define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) +#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) #define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) @@ -267,12 +298,12 @@ static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) { static char *str[] = { - NULL, + "", "ANSI T1.413", "ITU-T G.992.1 (G.DMT)", "ITU-T G.992.2 (G.LITE)" }; - if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL)) + if (unlikely(value >= ARRAY_SIZE(str))) return snprintf(buf, PAGE_SIZE, "%u\n", value); return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); } @@ -288,22 +319,28 @@ static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) static ssize_t cxacru_sysfs_show_mac_address(struct device *dev, struct device_attribute *attr, char *buf) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct atm_dev *atm_dev = usbatm_instance->atm_dev; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); - return snprintf(buf, PAGE_SIZE, "%pM\n", atm_dev->esi); + if (instance == NULL || instance->usbatm->atm_dev == NULL) + return -ENODEV; + + return snprintf(buf, PAGE_SIZE, "%pM\n", + instance->usbatm->atm_dev->esi); } static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev, struct device_attribute *attr, char *buf) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct cxacru_data *instance = usbatm_instance->driver_data; - u32 value = instance->card_info[CXINF_LINE_STARTABLE]; - static char *str[] = { "running", "stopped" }; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); + u32 value; + + if (instance == NULL) + return -ENODEV; + + value = instance->card_info[CXINF_LINE_STARTABLE]; if (unlikely(value >= ARRAY_SIZE(str))) return snprintf(buf, PAGE_SIZE, "%u\n", value); return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); @@ -312,9 +349,8 @@ static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev, static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct cxacru_data *instance = usbatm_instance->driver_data; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); int ret; int poll = -1; char str_cmd[8]; @@ -328,13 +364,16 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, return -EINVAL; ret = 0; + if (instance == NULL) + return -ENODEV; + if (mutex_lock_interruptible(&instance->adsl_state_serialize)) return -ERESTARTSYS; if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) { ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0); if (ret < 0) { - atm_err(usbatm_instance, "change adsl state:" + atm_err(instance->usbatm, "change adsl state:" " CHIP_ADSL_LINE_STOP returned %d\n", ret); ret = -EIO; @@ -354,7 +393,7 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) { ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); if (ret < 0) { - atm_err(usbatm_instance, "change adsl state:" + atm_err(instance->usbatm, "change adsl state:" " CHIP_ADSL_LINE_START returned %d\n", ret); ret = -EIO; @@ -407,6 +446,72 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, return ret; } +/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */ + +static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); + int len = strlen(buf); + int ret, pos, num; + __le32 data[CMD_PACKET_SIZE / 4]; + + if (!capable(CAP_NET_ADMIN)) + return -EACCES; + + if (instance == NULL) + return -ENODEV; + + pos = 0; + num = 0; + while (pos < len) { + int tmp; + u32 index; + u32 value; + + ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp); + if (ret < 2) + return -EINVAL; + if (index < 0 || index > 0x7f) + return -EINVAL; + pos += tmp; + + /* skip trailing newline */ + if (buf[pos] == '\n' && pos == len-1) + pos++; + + data[num * 2 + 1] = cpu_to_le32(index); + data[num * 2 + 2] = cpu_to_le32(value); + num++; + + /* send config values when data buffer is full + * or no more data + */ + if (pos >= len || num >= CMD_MAX_CONFIG) { + char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */ + + data[0] = cpu_to_le32(num); + ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, + (u8 *) data, 4 + num * 8, NULL, 0); + if (ret < 0) { + atm_err(instance->usbatm, + "set card data returned %d\n", ret); + return -EIO; + } + + for (tmp = 0; tmp < num; tmp++) + snprintf(log + tmp*12, 13, " %02x=%08x", + le32_to_cpu(data[tmp * 2 + 1]), + le32_to_cpu(data[tmp * 2 + 2])); + atm_info(instance->usbatm, "config%s\n", log); + num = 0; + } + } + + return len; +} + /* * All device attributes are included in CXACRU_ALL_FILES * so that the same list can be used multiple times: @@ -442,7 +547,8 @@ CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \ CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \ CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \ CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \ -CXACRU_CMD_##_action( adsl_state); +CXACRU_CMD_##_action( adsl_state); \ +CXACRU_SET_##_action( adsl_config); CXACRU_ALL_FILES(INIT); @@ -596,7 +702,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ len = ret / 4; for (offb = 0; offb < len; ) { int l = le32_to_cpu(buf[offb++]); - if (l > stride || l > (len - offb) / 2) { + if (l < 0 || l > stride || l > (len - offb) / 2) { if (printk_ratelimit()) usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n", cm, l); @@ -649,9 +755,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, { struct cxacru_data *instance = usbatm_instance->driver_data; struct usb_interface *intf = usbatm_instance->usb_intf; - /* - struct atm_dev *atm_dev = usbatm_instance->atm_dev; - */ int ret; int start_polling = 1; @@ -697,6 +800,9 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, mutex_unlock(&instance->poll_state_serialize); mutex_unlock(&instance->adsl_state_serialize); + printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number, + usbatm_instance->description, atm_dev->esi); + if (start_polling) cxacru_poll_status(&instance->poll_work.work); return 0; @@ -873,11 +979,9 @@ cleanup: static void cxacru_upload_firmware(struct cxacru_data *instance, const struct firmware *fw, - const struct firmware *bp, - const struct firmware *cf) + const struct firmware *bp) { int ret; - int off; struct usbatm_data *usbatm = instance->usbatm; struct usb_device *usb_dev = usbatm->usb_dev; __le16 signature[] = { usb_dev->descriptor.idVendor, @@ -911,6 +1015,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, } /* Firmware */ + usb_info(usbatm, "loading firmware\n"); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size); if (ret) { usb_err(usbatm, "Firmware upload failed: %d\n", ret); @@ -919,6 +1024,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, /* Boot ROM patch */ if (instance->modem_type->boot_rom_patch) { + usb_info(usbatm, "loading boot ROM patch\n"); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size); if (ret) { usb_err(usbatm, "Boot ROM patching failed: %d\n", ret); @@ -933,6 +1039,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, return; } + usb_info(usbatm, "starting device\n"); if (instance->modem_type->boot_rom_patch) { val = cpu_to_le32(BR_ADDR); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); @@ -958,26 +1065,6 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, usb_err(usbatm, "modem failed to initialize: %d\n", ret); return; } - - /* Load config data (le32), doing one packet at a time */ - if (cf) - for (off = 0; off < cf->size / 4; ) { - __le32 buf[CMD_PACKET_SIZE / 4 - 1]; - int i, len = min_t(int, cf->size / 4 - off, CMD_PACKET_SIZE / 4 / 2 - 1); - buf[0] = cpu_to_le32(len); - for (i = 0; i < len; i++, off++) { - buf[i * 2 + 1] = cpu_to_le32(off); - memcpy(buf + i * 2 + 2, cf->data + off * 4, 4); - } - ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, - (u8 *) buf, len, NULL, 0); - if (ret < 0) { - usb_err(usbatm, "load config data failed: %d\n", ret); - return; - } - } - - msleep_interruptible(4000); } static int cxacru_find_firmware(struct cxacru_data *instance, @@ -1003,7 +1090,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance, static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, struct usb_interface *usb_intf) { - const struct firmware *fw, *bp, *cf; + const struct firmware *fw, *bp; struct cxacru_data *instance = usbatm_instance->driver_data; int ret = cxacru_find_firmware(instance, "fw", &fw); @@ -1021,13 +1108,8 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, } } - if (cxacru_find_firmware(instance, "cf", &cf)) /* optional */ - cf = NULL; - - cxacru_upload_firmware(instance, fw, bp, cf); + cxacru_upload_firmware(instance, fw, bp); - if (cf) - release_firmware(cf); if (instance->modem_type->boot_rom_patch) release_firmware(bp); release_firmware(fw); diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index fbea8563df1e..9b53e8df4648 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -1333,6 +1333,7 @@ void usbatm_usb_disconnect(struct usb_interface *intf) if (instance->atm_dev) { sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device"); atm_dev_deregister(instance->atm_dev); + instance->atm_dev = NULL; } usbatm_put_instance(instance); /* taken in usbatm_usb_probe */ @@ -1348,7 +1349,7 @@ static int __init usbatm_usb_init(void) { dbg("%s: driver version %s", __func__, DRIVER_VERSION); - if (sizeof(struct usbatm_control) > sizeof(((struct sk_buff *) 0)->cb)) { + if (sizeof(struct usbatm_control) > FIELD_SIZEOF(struct sk_buff, cb)) { printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name); return -EIO; } diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index f6f4508a9d42..0863f85fcc26 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -204,4 +204,19 @@ struct usbatm_data { struct urb *urbs[0]; }; +static inline void *to_usbatm_driver_data(struct usb_interface *intf) +{ + struct usbatm_data *usbatm_instance; + + if (intf == NULL) + return NULL; + + usbatm_instance = usb_get_intfdata(intf); + + if (usbatm_instance == NULL) /* set NULL before unbind() */ + return NULL; + + return usbatm_instance->driver_data; /* set NULL after unbind() */ +} + #endif /* _USBATM_H_ */ diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c index 5633bc5c8bf2..029ee4a8a1f3 100644 --- a/drivers/usb/c67x00/c67x00-drv.c +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -137,13 +137,13 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev) if (!c67x00) return -ENOMEM; - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { dev_err(&pdev->dev, "Memory region busy\n"); ret = -EBUSY; goto request_mem_failed; } - c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1); + c67x00->hpi.base = ioremap(res->start, resource_size(res)); if (!c67x00->hpi.base) { dev_err(&pdev->dev, "Unable to map HPI registers\n"); ret = -EIO; @@ -182,7 +182,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev) request_irq_failed: iounmap(c67x00->hpi.base); map_failed: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); request_mem_failed: kfree(c67x00); @@ -208,7 +208,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); kfree(c67x00); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 34d4eb98829e..975d556b4787 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -170,6 +170,7 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { wb->use = 0; acm->transmitting--; + usb_autopm_put_interface_async(acm->control); } /* @@ -211,9 +212,12 @@ static int acm_write_start(struct acm *acm, int wbn) } dbg("%s susp_count: %d", __func__, acm->susp_count); + usb_autopm_get_interface_async(acm->control); if (acm->susp_count) { - acm->delayed_wb = wb; - schedule_work(&acm->waker); + if (!acm->delayed_wb) + acm->delayed_wb = wb; + else + usb_autopm_put_interface_async(acm->control); spin_unlock_irqrestore(&acm->write_lock, flags); return 0; /* A white lie */ } @@ -424,7 +428,6 @@ next_buffer: throttled = acm->throttle; spin_unlock_irqrestore(&acm->throttle_lock, flags); if (!throttled) { - tty_buffer_request_room(tty, buf->size); tty_insert_flip_string(tty, buf->base, buf->size); tty_flip_buffer_push(tty); } else { @@ -534,23 +537,6 @@ static void acm_softint(struct work_struct *work) tty_kref_put(tty); } -static void acm_waker(struct work_struct *waker) -{ - struct acm *acm = container_of(waker, struct acm, waker); - int rv; - - rv = usb_autopm_get_interface(acm->control); - if (rv < 0) { - dev_err(&acm->dev->dev, "Autopm failure in %s\n", __func__); - return; - } - if (acm->delayed_wb) { - acm_start_wb(acm, acm->delayed_wb); - acm->delayed_wb = NULL; - } - usb_autopm_put_interface(acm->control); -} - /* * TTY handlers */ @@ -566,7 +552,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm = acm_table[tty->index]; if (!acm || !acm->dev) - goto err_out; + goto out; else rv = 0; @@ -582,8 +568,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) mutex_lock(&acm->mutex); if (acm->port.count++) { + mutex_unlock(&acm->mutex); usb_autopm_put_interface(acm->control); - goto done; + goto out; } acm->ctrlurb->dev = acm->dev; @@ -612,18 +599,18 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); tasklet_schedule(&acm->urb_task); -done: + mutex_unlock(&acm->mutex); -err_out: +out: mutex_unlock(&open_mutex); return rv; full_bailout: usb_kill_urb(acm->ctrlurb); bail_out: - usb_autopm_put_interface(acm->control); acm->port.count--; mutex_unlock(&acm->mutex); + usb_autopm_put_interface(acm->control); early_bail: mutex_unlock(&open_mutex); tty_port_tty_set(&acm->port, NULL); @@ -1023,7 +1010,7 @@ static int acm_probe(struct usb_interface *intf, case USB_CDC_CALL_MANAGEMENT_TYPE: call_management_function = buffer[3]; call_interface_num = buffer[4]; - if ((call_management_function & 3) != 3) + if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3) dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); break; default: @@ -1178,7 +1165,6 @@ made_compressed_probe: acm->urb_task.func = acm_rx_tasklet; acm->urb_task.data = (unsigned long) acm; INIT_WORK(&acm->work, acm_softint); - INIT_WORK(&acm->waker, acm_waker); init_waitqueue_head(&acm->drain_wait); spin_lock_init(&acm->throttle_lock); spin_lock_init(&acm->write_lock); @@ -1343,7 +1329,6 @@ static void stop_data_traffic(struct acm *acm) tasklet_enable(&acm->urb_task); cancel_work_sync(&acm->work); - cancel_work_sync(&acm->waker); } static void acm_disconnect(struct usb_interface *intf) @@ -1435,6 +1420,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) static int acm_resume(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); + struct acm_wb *wb; int rv = 0; int cnt; @@ -1449,6 +1435,21 @@ static int acm_resume(struct usb_interface *intf) mutex_lock(&acm->mutex); if (acm->port.count) { rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); + + spin_lock_irq(&acm->write_lock); + if (acm->delayed_wb) { + wb = acm->delayed_wb; + acm->delayed_wb = NULL; + spin_unlock_irq(&acm->write_lock); + acm_start_wb(acm, acm->delayed_wb); + } else { + spin_unlock_irq(&acm->write_lock); + } + + /* + * delayed error checking because we must + * do the write path at all cost + */ if (rv < 0) goto err_out; @@ -1460,6 +1461,23 @@ err_out: return rv; } +static int acm_reset_resume(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + struct tty_struct *tty; + + mutex_lock(&acm->mutex); + if (acm->port.count) { + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + mutex_unlock(&acm->mutex); + return acm_resume(intf); +} + #endif /* CONFIG_PM */ #define NOKIA_PCSUITE_ACM_INFO(x) \ @@ -1471,7 +1489,7 @@ err_out: * USB driver structure. */ -static struct usb_device_id acm_ids[] = { +static const struct usb_device_id acm_ids[] = { /* quirky and broken devices */ { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ @@ -1576,6 +1594,11 @@ static struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ + /* Support Lego NXT using pbLua firmware */ + { USB_DEVICE(0x0694, 0xff00), + .driver_info = NOT_A_MODEM, + }, + /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_V25TER) }, @@ -1602,6 +1625,7 @@ static struct usb_driver acm_driver = { #ifdef CONFIG_PM .suspend = acm_suspend, .resume = acm_resume, + .reset_resume = acm_reset_resume, #endif .id_table = acm_ids, #ifdef CONFIG_PM diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index c4a0ee8ffccf..4a8e87ec6ce9 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -112,7 +112,6 @@ struct acm { struct mutex mutex; struct usb_cdc_line_coding line; /* bits, stop, parity */ struct work_struct work; /* work queue entry for line discipline waking up */ - struct work_struct waker; wait_queue_head_t drain_wait; /* close processing */ struct tasklet_struct urb_task; /* rx processing */ spinlock_t throttle_lock; /* synchronize throtteling and read callback */ @@ -137,3 +136,4 @@ struct acm { #define NO_UNION_NORMAL 1 #define SINGLE_RX_URB 2 #define NO_CAP_LINE 4 +#define NOT_A_MODEM 8 diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3e564bfe17d1..18aafcb08fc8 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -31,7 +31,7 @@ #define DRIVER_AUTHOR "Oliver Neukum" #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management" -static struct usb_device_id wdm_ids[] = { +static const struct usb_device_id wdm_ids[] = { { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 9bc112ee7803..93b5f85d7ceb 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -163,7 +163,6 @@ struct usblp { unsigned char used; /* True if open */ unsigned char present; /* True if not disconnected */ unsigned char bidir; /* interface is bidirectional */ - unsigned char sleeping; /* interface is suspended */ unsigned char no_paper; /* Paper Out happened */ unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ /* first 2 bytes are (big-endian) length */ @@ -191,7 +190,6 @@ static void usblp_dump(struct usblp *usblp) { dbg("quirks=%d", usblp->quirks); dbg("used=%d", usblp->used); dbg("bidir=%d", usblp->bidir); - dbg("sleeping=%d", usblp->sleeping); dbg("device_id_string=\"%s\"", usblp->device_id_string ? usblp->device_id_string + 2 : @@ -376,7 +374,7 @@ static int usblp_check_status(struct usblp *usblp, int err) static int handle_bidir (struct usblp *usblp) { - if (usblp->bidir && usblp->used && !usblp->sleeping) { + if (usblp->bidir && usblp->used) { if (usblp_submit_read(usblp) < 0) return -EIO; } @@ -503,11 +501,6 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - if (usblp->sleeping) { - retval = -ENODEV; - goto done; - } - dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) ); @@ -914,8 +907,6 @@ static int usblp_wtest(struct usblp *usblp, int nonblock) return 0; } spin_unlock_irqrestore(&usblp->lock, flags); - if (usblp->sleeping) - return -ENODEV; if (nonblock) return -EAGAIN; return 1; @@ -968,8 +959,6 @@ static int usblp_rtest(struct usblp *usblp, int nonblock) return 0; } spin_unlock_irqrestore(&usblp->lock, flags); - if (usblp->sleeping) - return -ENODEV; if (nonblock) return -EAGAIN; return 1; @@ -1377,12 +1366,10 @@ static void usblp_disconnect(struct usb_interface *intf) mutex_unlock (&usblp_mutex); } -static int usblp_suspend (struct usb_interface *intf, pm_message_t message) +static int usblp_suspend(struct usb_interface *intf, pm_message_t message) { struct usblp *usblp = usb_get_intfdata (intf); - /* we take no more IO */ - usblp->sleeping = 1; usblp_unlink_urbs(usblp); #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ /* not strictly necessary, but just in case */ @@ -1393,18 +1380,17 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) return 0; } -static int usblp_resume (struct usb_interface *intf) +static int usblp_resume(struct usb_interface *intf) { struct usblp *usblp = usb_get_intfdata (intf); int r; - usblp->sleeping = 0; r = handle_bidir (usblp); return r; } -static struct usb_device_id usblp_ids [] = { +static const struct usb_device_id usblp_ids[] = { { USB_DEVICE_INFO(7, 1, 1) }, { USB_DEVICE_INFO(7, 1, 2) }, { USB_DEVICE_INFO(7, 1, 3) }, diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 7c5f4e32c920..8588c0937a89 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -48,7 +48,7 @@ */ #define USBTMC_MAX_READS_TO_CLEAR_BULK_IN 100 -static struct usb_device_id usbtmc_devices[] = { +static const struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), }, { 0, } /* terminating entry */ diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index ad925946f869..97a819c23ef3 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -91,8 +91,8 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB selective suspend/resume and wakeup" - depends on USB && PM + bool "USB runtime power management (suspend/resume and wakeup)" + depends on USB && PM_RUNTIME help If you say Y here, you can use driver calls or the sysfs "power/level" file to suspend or resume individual USB diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 355dffcc23b0..d41811bfef2a 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -117,12 +117,20 @@ static const char *format_endpt = * However, these will come from functions that return ptrs to each of them. */ -static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq); -static unsigned int conndiscevcnt; - -/* this struct stores the poll state for <mountpoint>/devices pollers */ -struct usb_device_status { - unsigned int lastev; +/* + * Wait for an connect/disconnect event to happen. We initialize + * the event counter with an odd number, and each event will increment + * the event counter by two, so it will always _stay_ odd. That means + * that it will never be zero, so "event 0" will never match a current + * event, and thus 'poll' will always trigger as readable for the first + * time it gets called. + */ +static struct device_connect_event { + atomic_t count; + wait_queue_head_t wait; +} device_event = { + .count = ATOMIC_INIT(1), + .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait) }; struct class_info { @@ -156,8 +164,8 @@ static const struct class_info clas_info[] = void usbfs_conn_disc_event(void) { - conndiscevcnt++; - wake_up(&deviceconndiscwq); + atomic_add(2, &device_event.count); + wake_up(&device_event.wait); } static const char *class_decode(const int class) @@ -629,55 +637,16 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait) { - struct usb_device_status *st = file->private_data; - unsigned int mask = 0; - - lock_kernel(); - if (!st) { - st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL); - - /* we may have dropped BKL - - * need to check for having lost the race */ - if (file->private_data) { - kfree(st); - st = file->private_data; - goto lost_race; - } - /* we haven't lost - check for allocation failure now */ - if (!st) { - unlock_kernel(); - return POLLIN; - } + unsigned int event_count; - /* - * need to prevent the module from being unloaded, since - * proc_unregister does not call the release method and - * we would have a memory leak - */ - st->lastev = conndiscevcnt; - file->private_data = st; - mask = POLLIN; - } -lost_race: - if (file->f_mode & FMODE_READ) - poll_wait(file, &deviceconndiscwq, wait); - if (st->lastev != conndiscevcnt) - mask |= POLLIN; - st->lastev = conndiscevcnt; - unlock_kernel(); - return mask; -} + poll_wait(file, &device_event.wait, wait); -static int usb_device_open(struct inode *inode, struct file *file) -{ - file->private_data = NULL; - return 0; -} + event_count = atomic_read(&device_event.count); + if (file->f_version != event_count) { + file->f_version = event_count; + return POLLIN | POLLRDNORM; + } -static int usb_device_release(struct inode *inode, struct file *file) -{ - kfree(file->private_data); - file->private_data = NULL; return 0; } @@ -685,7 +654,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - lock_kernel(); + mutex_lock(&file->f_dentry->d_inode->i_mutex); switch (orig) { case 0: @@ -701,7 +670,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - unlock_kernel(); + mutex_unlock(&file->f_dentry->d_inode->i_mutex); return ret; } @@ -709,6 +678,4 @@ const struct file_operations usbfs_devices_fops = { .llseek = usb_device_lseek, .read = usb_device_read, .poll = usb_device_poll, - .open = usb_device_open, - .release = usb_device_release, }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index a678186f218f..e909ff7b9094 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -122,7 +122,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - lock_kernel(); + mutex_lock(&file->f_dentry->d_inode->i_mutex); switch (orig) { case 0: @@ -138,7 +138,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - unlock_kernel(); + mutex_unlock(&file->f_dentry->d_inode->i_mutex); return ret; } @@ -310,7 +310,8 @@ static struct async *async_getpending(struct dev_state *ps, static void snoop_urb(struct usb_device *udev, void __user *userurb, int pipe, unsigned length, - int timeout_or_status, enum snoop_when when) + int timeout_or_status, enum snoop_when when, + unsigned char *data, unsigned data_len) { static const char *types[] = {"isoc", "int", "ctrl", "bulk"}; static const char *dirs[] = {"out", "in"}; @@ -344,6 +345,11 @@ static void snoop_urb(struct usb_device *udev, "status %d\n", ep, t, d, length, timeout_or_status); } + + if (data && data_len > 0) { + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, + data, data_len, 1); + } } #define AS_CONTINUATION 1 @@ -410,7 +416,9 @@ static void async_completed(struct urb *urb) } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length, - as->status, COMPLETE); + as->status, COMPLETE, + ((urb->transfer_flags & URB_DIR_MASK) == USB_DIR_OUT) ? + NULL : urb->transfer_buffer, urb->actual_length); if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET && as->status != -ENOENT) cancel_bulk_urbs(ps, as->bulk_addr); @@ -653,20 +661,20 @@ static int usbdev_open(struct inode *inode, struct file *file) const struct cred *cred = current_cred(); int ret; - lock_kernel(); - /* Protect against simultaneous removal or release */ - mutex_lock(&usbfs_mutex); - ret = -ENOMEM; ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL); if (!ps) - goto out; + goto out_free_ps; ret = -ENODEV; + /* Protect against simultaneous removal or release */ + mutex_lock(&usbfs_mutex); + /* usbdev device-node */ if (imajor(inode) == USB_DEVICE_MAJOR) dev = usbdev_lookup_by_devt(inode->i_rdev); + #ifdef CONFIG_USB_DEVICEFS /* procfs file */ if (!dev) { @@ -678,13 +686,19 @@ static int usbdev_open(struct inode *inode, struct file *file) dev = NULL; } #endif - if (!dev || dev->state == USB_STATE_NOTATTACHED) - goto out; + mutex_unlock(&usbfs_mutex); + + if (!dev) + goto out_free_ps; + + usb_lock_device(dev); + if (dev->state == USB_STATE_NOTATTACHED) + goto out_unlock_device; + ret = usb_autoresume_device(dev); if (ret) - goto out; + goto out_unlock_device; - ret = 0; ps->dev = dev; ps->file = file; spin_lock_init(&ps->lock); @@ -702,15 +716,16 @@ static int usbdev_open(struct inode *inode, struct file *file) smp_wmb(); list_add_tail(&ps->list, &dev->filelist); file->private_data = ps; + usb_unlock_device(dev); snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current), current->comm); - out: - if (ret) { - kfree(ps); - usb_put_dev(dev); - } - mutex_unlock(&usbfs_mutex); - unlock_kernel(); + return ret; + + out_unlock_device: + usb_unlock_device(dev); + usb_put_dev(dev); + out_free_ps: + kfree(ps); return ret; } @@ -724,10 +739,7 @@ static int usbdev_release(struct inode *inode, struct file *file) usb_lock_device(dev); usb_hub_release_all_ports(dev, ps); - /* Protect against simultaneous open */ - mutex_lock(&usbfs_mutex); list_del_init(&ps->list); - mutex_unlock(&usbfs_mutex); for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed); ifnum++) { @@ -770,6 +782,13 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (!tbuf) return -ENOMEM; tmo = ctrl.timeout; + snoop(&dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + ctrl.bRequestType, ctrl.bRequest, + __le16_to_cpup(&ctrl.wValue), + __le16_to_cpup(&ctrl.wIndex), + __le16_to_cpup(&ctrl.wLength)); if (ctrl.bRequestType & 0x80) { if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data, ctrl.wLength)) { @@ -777,15 +796,15 @@ static int proc_control(struct dev_state *ps, void __user *arg) return -EINVAL; } pipe = usb_rcvctrlpipe(dev, 0); - snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0); usb_unlock_device(dev); i = usb_control_msg(dev, pipe, ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); - + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, + tbuf, i); if ((i > 0) && ctrl.wLength) { if (copy_to_user(ctrl.data, tbuf, i)) { free_page((unsigned long)tbuf); @@ -800,14 +819,15 @@ static int proc_control(struct dev_state *ps, void __user *arg) } } pipe = usb_sndctrlpipe(dev, 0); - snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, + tbuf, ctrl.wLength); usb_unlock_device(dev); i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0); } free_page((unsigned long)tbuf); if (i < 0 && i != -EPIPE) { @@ -853,12 +873,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) kfree(tbuf); return -EINVAL; } - snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2); if (!i && len2) { if (copy_to_user(bulk.data, tbuf, len2)) { @@ -873,12 +893,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) return -EFAULT; } } - snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0); } kfree(tbuf); if (i < 0) @@ -1097,6 +1117,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, is_in = 0; uurb->endpoint &= ~USB_DIR_IN; } + snoop(&ps->dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + dr->bRequestType, dr->bRequest, + __le16_to_cpup(&dr->wValue), + __le16_to_cpup(&dr->wIndex), + __le16_to_cpup(&dr->wLength)); break; case USBDEVFS_URB_TYPE_BULK: @@ -1104,13 +1131,25 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, case USB_ENDPOINT_XFER_CONTROL: case USB_ENDPOINT_XFER_ISOC: return -EINVAL; - /* allow single-shot interrupt transfers, at bogus rates */ + case USB_ENDPOINT_XFER_INT: + /* allow single-shot interrupt transfers */ + uurb->type = USBDEVFS_URB_TYPE_INTERRUPT; + goto interrupt_urb; } uurb->number_of_packets = 0; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; break; + case USBDEVFS_URB_TYPE_INTERRUPT: + if (!usb_endpoint_xfer_int(&ep->desc)) + return -EINVAL; + interrupt_urb: + uurb->number_of_packets = 0; + if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) + return -EINVAL; + break; + case USBDEVFS_URB_TYPE_ISO: /* arbitrary limit */ if (uurb->number_of_packets < 1 || @@ -1143,14 +1182,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, uurb->buffer_length = totlen; break; - case USBDEVFS_URB_TYPE_INTERRUPT: - uurb->number_of_packets = 0; - if (!usb_endpoint_xfer_int(&ep->desc)) - return -EINVAL; - if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) - return -EINVAL; - break; - default: return -EINVAL; } @@ -1236,7 +1267,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, } } snoop_urb(ps->dev, as->userurb, as->urb->pipe, - as->urb->transfer_buffer_length, 0, SUBMIT); + as->urb->transfer_buffer_length, 0, SUBMIT, + is_in ? NULL : as->urb->transfer_buffer, + uurb->buffer_length); async_newpending(as); if (usb_endpoint_xfer_bulk(&ep->desc)) { @@ -1274,7 +1307,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); snoop_urb(ps->dev, as->userurb, as->urb->pipe, - 0, ret, COMPLETE); + 0, ret, COMPLETE, NULL, 0); async_removepending(as); free_async(as); return ret; @@ -1628,7 +1661,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) if (driver == NULL || driver->ioctl == NULL) { retval = -ENOTTY; } else { + /* keep API that guarantees BKL */ + lock_kernel(); retval = driver->ioctl(intf, ctl->ioctl_code, buf); + unlock_kernel(); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } @@ -1711,6 +1747,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, if (!(file->f_mode & FMODE_WRITE)) return -EPERM; + usb_lock_device(dev); if (!connected(ps)) { usb_unlock_device(dev); @@ -1877,9 +1914,7 @@ static long usbdev_ioctl(struct file *file, unsigned int cmd, { int ret; - lock_kernel(); ret = usbdev_do_ioctl(file, cmd, (void __user *)arg); - unlock_kernel(); return ret; } @@ -1890,9 +1925,7 @@ static long usbdev_compat_ioctl(struct file *file, unsigned int cmd, { int ret; - lock_kernel(); ret = usbdev_do_ioctl(file, cmd, compat_ptr(arg)); - unlock_kernel(); return ret; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 60a45f1e3a67..f3c233806fa3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -25,7 +25,7 @@ #include <linux/device.h> #include <linux/usb.h> #include <linux/usb/quirks.h> -#include <linux/workqueue.h> +#include <linux/pm_runtime.h> #include "hcd.h" #include "usb.h" @@ -221,7 +221,7 @@ static int usb_probe_device(struct device *dev) { struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); struct usb_device *udev = to_usb_device(dev); - int error = -ENODEV; + int error = 0; dev_dbg(dev, "%s\n", __func__); @@ -230,18 +230,23 @@ static int usb_probe_device(struct device *dev) /* The device should always appear to be in use * unless the driver suports autosuspend. */ - udev->pm_usage_cnt = !(udriver->supports_autosuspend); + if (!udriver->supports_autosuspend) + error = usb_autoresume_device(udev); - error = udriver->probe(udev); + if (!error) + error = udriver->probe(udev); return error; } /* called from driver core with dev locked */ static int usb_unbind_device(struct device *dev) { + struct usb_device *udev = to_usb_device(dev); struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); - udriver->disconnect(to_usb_device(dev)); + udriver->disconnect(udev); + if (!udriver->supports_autosuspend) + usb_autosuspend_device(udev); return 0; } @@ -274,60 +279,62 @@ static int usb_probe_interface(struct device *dev) intf->needs_binding = 0; if (usb_device_is_owned(udev)) - return -ENODEV; + return error; if (udev->authorized == 0) { dev_err(&intf->dev, "Device is not authorized for usage\n"); - return -ENODEV; + return error; } id = usb_match_id(intf, driver->id_table); if (!id) id = usb_match_dynamic_id(intf, driver); - if (id) { - dev_dbg(dev, "%s - got id\n", __func__); - - error = usb_autoresume_device(udev); - if (error) - return error; + if (!id) + return error; - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); - intf->condition = USB_INTERFACE_BINDING; + dev_dbg(dev, "%s - got id\n", __func__); - /* The interface should always appear to be in use - * unless the driver suports autosuspend. - */ - atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend); - - /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0) { - error = usb_set_interface(udev, intf->altsetting[0]. - desc.bInterfaceNumber, 0); - if (error < 0) - goto err; + error = usb_autoresume_device(udev); + if (error) + return error; - intf->needs_altsetting0 = 0; - } + intf->condition = USB_INTERFACE_BINDING; - error = driver->probe(intf, id); - if (error) + /* Bound interfaces are initially active. They are + * runtime-PM-enabled only if the driver has autosuspend support. + * They are sensitive to their children's power states. + */ + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); + + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0) { + error = usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + if (error < 0) goto err; - - intf->condition = USB_INTERFACE_BOUND; - usb_autosuspend_device(udev); + intf->needs_altsetting0 = 0; } + error = driver->probe(intf, id); + if (error) + goto err; + + intf->condition = USB_INTERFACE_BOUND; + usb_autosuspend_device(udev); return error; -err: - mark_quiesced(intf); + err: intf->needs_remote_wakeup = 0; intf->condition = USB_INTERFACE_UNBOUND; usb_cancel_queued_reset(intf); + + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + usb_autosuspend_device(udev); return error; } @@ -377,9 +384,17 @@ static int usb_unbind_interface(struct device *dev) usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(intf); intf->needs_remote_wakeup = 0; + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + /* Undo any residual pm_autopm_get_interface_* calls */ + for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r) + usb_autopm_put_interface_no_suspend(intf); + atomic_set(&intf->pm_usage_cnt, 0); + if (!error) usb_autosuspend_device(udev); @@ -410,7 +425,6 @@ int usb_driver_claim_interface(struct usb_driver *driver, struct usb_interface *iface, void *priv) { struct device *dev = &iface->dev; - struct usb_device *udev = interface_to_usbdev(iface); int retval = 0; if (dev->driver) @@ -420,11 +434,16 @@ int usb_driver_claim_interface(struct usb_driver *driver, usb_set_intfdata(iface, priv); iface->needs_binding = 0; - usb_pm_lock(udev); iface->condition = USB_INTERFACE_BOUND; - mark_active(iface); - atomic_set(&iface->pm_usage_cnt, !driver->supports_autosuspend); - usb_pm_unlock(udev); + + /* Bound interfaces are initially active. They are + * runtime-PM-enabled only if the driver has autosuspend support. + * They are sensitive to their children's power states. + */ + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() @@ -470,10 +489,10 @@ void usb_driver_release_interface(struct usb_driver *driver, if (device_is_registered(dev)) { device_release_driver(dev); } else { - down(&dev->sem); + device_lock(dev); usb_unbind_interface(dev); dev->driver = NULL; - up(&dev->sem); + device_unlock(dev); } } EXPORT_SYMBOL_GPL(usb_driver_release_interface); @@ -691,9 +710,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; - /* driver is often null here; dev_dbg() would oops */ - pr_debug("usb %s: uevent\n", dev_name(dev)); - if (is_usb_device(dev)) { usb_dev = to_usb_device(dev); } else if (is_usb_interface(dev)) { @@ -705,6 +721,7 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) } if (usb_dev->devnum < 0) { + /* driver is often null here; dev_dbg() would oops */ pr_debug("usb %s: already deleted?\n", dev_name(dev)); return -ENODEV; } @@ -983,7 +1000,6 @@ static void do_unbind_rebind(struct usb_device *udev, int action) } } -/* Caller has locked udev's pm_mutex */ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; @@ -1007,7 +1023,6 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) return status; } -/* Caller has locked udev's pm_mutex */ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; @@ -1022,6 +1037,14 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) goto done; } + /* Non-root devices on a full/low-speed bus must wait for their + * companion high-speed root hub, in case a handoff is needed. + */ + if (!(msg.event & PM_EVENT_AUTO) && udev->parent && + udev->bus->hs_companion) + device_pm_wait_for_dev(&udev->dev, + &udev->bus->hs_companion->root_hub->dev); + if (udev->quirks & USB_QUIRK_RESET_RESUME) udev->reset_resume = 1; @@ -1033,27 +1056,20 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) return status; } -/* Caller has locked intf's usb_device's pm mutex */ static int usb_suspend_interface(struct usb_device *udev, struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; - /* with no hardware, USB interfaces only use FREEZE and ON states */ - if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf)) - goto done; - - /* This can happen; see usb_driver_release_interface() */ - if (intf->condition == USB_INTERFACE_UNBOUND) + if (udev->state == USB_STATE_NOTATTACHED || + intf->condition == USB_INTERFACE_UNBOUND) goto done; driver = to_usb_driver(intf->dev.driver); if (driver->suspend) { status = driver->suspend(intf, msg); - if (status == 0) - mark_quiesced(intf); - else if (!(msg.event & PM_EVENT_AUTO)) + if (status && !(msg.event & PM_EVENT_AUTO)) dev_err(&intf->dev, "%s error %d\n", "suspend", status); } else { @@ -1061,7 +1077,6 @@ static int usb_suspend_interface(struct usb_device *udev, intf->needs_binding = 1; dev_warn(&intf->dev, "no %s for driver %s?\n", "suspend", driver->name); - mark_quiesced(intf); } done: @@ -1069,14 +1084,13 @@ static int usb_suspend_interface(struct usb_device *udev, return status; } -/* Caller has locked intf's usb_device's pm_mutex */ static int usb_resume_interface(struct usb_device *udev, struct usb_interface *intf, pm_message_t msg, int reset_resume) { struct usb_driver *driver; int status = 0; - if (udev->state == USB_STATE_NOTATTACHED || is_active(intf)) + if (udev->state == USB_STATE_NOTATTACHED) goto done; /* Don't let autoresume interfere with unbinding */ @@ -1127,90 +1141,11 @@ static int usb_resume_interface(struct usb_device *udev, done: dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); - if (status == 0 && intf->condition == USB_INTERFACE_BOUND) - mark_active(intf); /* Later we will unbind the driver and/or reprobe, if necessary */ return status; } -#ifdef CONFIG_USB_SUSPEND - -/* Internal routine to check whether we may autosuspend a device. */ -static int autosuspend_check(struct usb_device *udev, int reschedule) -{ - int i; - struct usb_interface *intf; - unsigned long suspend_time, j; - - /* For autosuspend, fail fast if anything is in use or autosuspend - * is disabled. Also fail if any interfaces require remote wakeup - * but it isn't available. - */ - if (udev->pm_usage_cnt > 0) - return -EBUSY; - if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled) - return -EPERM; - - suspend_time = udev->last_busy + udev->autosuspend_delay; - if (udev->actconfig) { - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (atomic_read(&intf->pm_usage_cnt) > 0) - return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, "remote wakeup needed " - "for autosuspend\n"); - return -EOPNOTSUPP; - } - - /* Don't allow autosuspend if the device will need - * a reset-resume and any of its interface drivers - * doesn't include support. - */ - if (udev->quirks & USB_QUIRK_RESET_RESUME) { - struct usb_driver *driver; - - driver = to_usb_driver(intf->dev.driver); - if (!driver->reset_resume || - intf->needs_remote_wakeup) - return -EOPNOTSUPP; - } - } - } - - /* If everything is okay but the device hasn't been idle for long - * enough, queue a delayed autosuspend request. If the device - * _has_ been idle for long enough and the reschedule flag is set, - * likewise queue a delayed (1 second) autosuspend request. - */ - j = jiffies; - if (time_before(j, suspend_time)) - reschedule = 1; - else - suspend_time = j + HZ; - if (reschedule) { - if (!timer_pending(&udev->autosuspend.timer)) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - round_jiffies_up_relative(suspend_time - j)); - } - return -EAGAIN; - } - return 0; -} - -#else - -static inline int autosuspend_check(struct usb_device *udev, int reschedule) -{ - return 0; -} - -#endif /* CONFIG_USB_SUSPEND */ - /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -1222,27 +1157,12 @@ static inline int autosuspend_check(struct usb_device *udev, int reschedule) * all the interfaces which were suspended are resumed so that they remain * in the same state as the device. * - * If an autosuspend is in progress the routine checks first to make sure - * that neither the device itself or any of its active interfaces is in use - * (pm_usage_cnt is greater than 0). If they are, the autosuspend fails. - * - * If the suspend succeeds, the routine recursively queues an autosuspend - * request for @udev's parent device, thereby propagating the change up - * the device tree. If all of the parent's children are now suspended, - * the parent will autosuspend in turn. - * - * The suspend method calls are subject to mutual exclusion under control - * of @udev's pm_mutex. Many of these calls are also under the protection - * of @udev's device lock (including all requests originating outside the - * USB subsystem), but autosuspend requests generated by a child device or - * interface driver may not be. Usbcore will insure that the method calls - * do not arrive during bind, unbind, or reset operations. However, drivers - * must be prepared to handle suspend calls arriving at unpredictable times. - * The only way to block such calls is to do an autoresume (preventing - * autosuspends) while holding @udev's device lock (preventing outside - * suspends). - * - * The caller must hold @udev->pm_mutex. + * Autosuspend requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other suspend calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle suspend calls arriving at + * unpredictable times. * * This routine can run only in process context. */ @@ -1251,20 +1171,11 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) int status = 0; int i = 0; struct usb_interface *intf; - struct usb_device *parent = udev->parent; if (udev->state == USB_STATE_NOTATTACHED || udev->state == USB_STATE_SUSPENDED) goto done; - udev->do_remote_wakeup = device_may_wakeup(&udev->dev); - - if (msg.event & PM_EVENT_AUTO) { - status = autosuspend_check(udev, 0); - if (status < 0) - goto done; - } - /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { @@ -1279,35 +1190,21 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { - pm_message_t msg2; - - msg2.event = msg.event ^ (PM_EVENT_SUSPEND | PM_EVENT_RESUME); + msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); while (--i >= 0) { intf = udev->actconfig->interface[i]; - usb_resume_interface(udev, intf, msg2, 0); + usb_resume_interface(udev, intf, msg, 0); } - /* Try another autosuspend when the interfaces aren't busy */ - if (msg.event & PM_EVENT_AUTO) - autosuspend_check(udev, status == -EBUSY); - - /* If the suspend succeeded then prevent any more URB submissions, - * flush any outstanding URBs, and propagate the suspend up the tree. + /* If the suspend succeeded then prevent any more URB submissions + * and flush any outstanding URBs. */ } else { - cancel_delayed_work(&udev->autosuspend); udev->can_submit = 0; for (i = 0; i < 16; ++i) { usb_hcd_flush_endpoint(udev, udev->ep_out[i]); usb_hcd_flush_endpoint(udev, udev->ep_in[i]); } - - /* If this is just a FREEZE or a PRETHAW, udev might - * not really be suspended. Only true suspends get - * propagated up the device tree. - */ - if (parent && udev->state == USB_STATE_SUSPENDED) - usb_autosuspend_device(parent); } done: @@ -1324,23 +1221,12 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) * the resume method for @udev and then calls the resume methods for all * the interface drivers in @udev. * - * Before starting the resume, the routine calls itself recursively for - * the parent device of @udev, thereby propagating the change up the device - * tree and assuring that @udev will be able to resume. If the parent is - * unable to resume successfully, the routine fails. - * - * The resume method calls are subject to mutual exclusion under control - * of @udev's pm_mutex. Many of these calls are also under the protection - * of @udev's device lock (including all requests originating outside the - * USB subsystem), but autoresume requests generated by a child device or - * interface driver may not be. Usbcore will insure that the method calls - * do not arrive during bind, unbind, or reset operations. However, drivers - * must be prepared to handle resume calls arriving at unpredictable times. - * The only way to block such calls is to do an autoresume (preventing - * other autoresumes) while holding @udev's device lock (preventing outside - * resumes). - * - * The caller must hold @udev->pm_mutex. + * Autoresume requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other resume calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle resume calls arriving at + * unpredictable times. * * This routine can run only in process context. */ @@ -1349,48 +1235,18 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) int status = 0; int i; struct usb_interface *intf; - struct usb_device *parent = udev->parent; - cancel_delayed_work(&udev->autosuspend); if (udev->state == USB_STATE_NOTATTACHED) { status = -ENODEV; goto done; } udev->can_submit = 1; - /* Propagate the resume up the tree, if necessary */ - if (udev->state == USB_STATE_SUSPENDED) { - if (parent) { - status = usb_autoresume_device(parent); - if (status == 0) { - status = usb_resume_device(udev, msg); - if (status || udev->state == - USB_STATE_NOTATTACHED) { - usb_autosuspend_device(parent); - - /* It's possible usb_resume_device() - * failed after the port was - * unsuspended, causing udev to be - * logically disconnected. We don't - * want usb_disconnect() to autosuspend - * the parent again, so tell it that - * udev disconnected while still - * suspended. */ - if (udev->state == - USB_STATE_NOTATTACHED) - udev->discon_suspended = 1; - } - } - } else { - - /* We can't progagate beyond the USB subsystem, - * so if a root hub's controller is suspended - * then we're stuck. */ - status = usb_resume_device(udev, msg); - } - } else if (udev->reset_resume) + /* Resume the device */ + if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume) status = usb_resume_device(udev, msg); + /* Resume the interfaces */ if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; @@ -1406,55 +1262,94 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) return status; } -#ifdef CONFIG_USB_SUSPEND +/* The device lock is held by the PM core */ +int usb_suspend(struct device *dev, pm_message_t msg) +{ + struct usb_device *udev = to_usb_device(dev); -/* Internal routine to adjust a device's usage counter and change - * its autosuspend state. - */ -static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) + do_unbind_rebind(udev, DO_UNBIND); + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + return usb_suspend_both(udev, msg); +} + +/* The device lock is held by the PM core */ +int usb_resume(struct device *dev, pm_message_t msg) { - int status = 0; + struct usb_device *udev = to_usb_device(dev); + int status; - usb_pm_lock(udev); - udev->pm_usage_cnt += inc_usage_cnt; - WARN_ON(udev->pm_usage_cnt < 0); - if (inc_usage_cnt) - udev->last_busy = jiffies; - if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { - if (udev->state == USB_STATE_SUSPENDED) - status = usb_resume_both(udev, PMSG_AUTO_RESUME); - if (status != 0) - udev->pm_usage_cnt -= inc_usage_cnt; - else if (inc_usage_cnt) + /* For PM complete calls, all we do is rebind interfaces */ + if (msg.event == PM_EVENT_ON) { + if (udev->state != USB_STATE_NOTATTACHED) + do_unbind_rebind(udev, DO_REBIND); + status = 0; + + /* For all other calls, take the device back to full power and + * tell the PM core in case it was autosuspended previously. + */ + } else { + status = usb_resume_both(udev, msg); + if (status == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); udev->last_busy = jiffies; - } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) { - status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); + } } - usb_pm_unlock(udev); + + /* Avoid PM error messages for devices disconnected while suspended + * as we'll display regular disconnect messages just a bit later. + */ + if (status == -ENODEV) + status = 0; return status; } -/* usb_autosuspend_work - callback routine to autosuspend a USB device */ -void usb_autosuspend_work(struct work_struct *work) -{ - struct usb_device *udev = - container_of(work, struct usb_device, autosuspend.work); +#endif /* CONFIG_PM */ - usb_autopm_do_device(udev, 0); +#ifdef CONFIG_USB_SUSPEND + +/** + * usb_enable_autosuspend - allow a USB device to be autosuspended + * @udev: the USB device which may be autosuspended + * + * This routine allows @udev to be autosuspended. An autosuspend won't + * take place until the autosuspend_delay has elapsed and all the other + * necessary conditions are satisfied. + * + * The caller must hold @udev's device lock. + */ +int usb_enable_autosuspend(struct usb_device *udev) +{ + if (udev->autosuspend_disabled) { + udev->autosuspend_disabled = 0; + usb_autosuspend_device(udev); + } + return 0; } +EXPORT_SYMBOL_GPL(usb_enable_autosuspend); -/* usb_autoresume_work - callback routine to autoresume a USB device */ -void usb_autoresume_work(struct work_struct *work) +/** + * usb_disable_autosuspend - prevent a USB device from being autosuspended + * @udev: the USB device which may not be autosuspended + * + * This routine prevents @udev from being autosuspended and wakes it up + * if it is already autosuspended. + * + * The caller must hold @udev's device lock. + */ +int usb_disable_autosuspend(struct usb_device *udev) { - struct usb_device *udev = - container_of(work, struct usb_device, autoresume); + int rc = 0; - /* Wake it up, let the drivers do their thing, and then put it - * back to sleep. - */ - if (usb_autopm_do_device(udev, 1) == 0) - usb_autopm_do_device(udev, -1); + if (!udev->autosuspend_disabled) { + rc = usb_autoresume_device(udev); + if (rc == 0) + udev->autosuspend_disabled = 1; + } + return rc; } +EXPORT_SYMBOL_GPL(usb_disable_autosuspend); /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces @@ -1464,15 +1359,11 @@ void usb_autoresume_work(struct work_struct *work) * @udev and wants to allow it to autosuspend. Examples would be when * @udev's device file in usbfs is closed or after a configuration change. * - * @udev's usage counter is decremented. If it or any of the usage counters - * for an active interface is greater than 0, no autosuspend request will be - * queued. (If an interface driver does not support autosuspend then its - * usage counter is permanently positive.) Furthermore, if an interface - * driver requires remote-wakeup capability during autosuspend but remote - * wakeup is disabled, the autosuspend will fail. + * @udev's usage counter is decremented; if it drops to 0 and all the + * interfaces are inactive then a delayed autosuspend will be attempted. + * The attempt may fail (see autosuspend_check()). * - * Often the caller will hold @udev's device lock, but this is not - * necessary. + * The caller must hold @udev's device lock. * * This routine can run only in process context. */ @@ -1480,9 +1371,11 @@ void usb_autosuspend_device(struct usb_device *udev) { int status; - status = usb_autopm_do_device(udev, -1); - dev_vdbg(&udev->dev, "%s: cnt %d\n", - __func__, udev->pm_usage_cnt); + udev->last_busy = jiffies; + status = pm_runtime_put_sync(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); } /** @@ -1492,17 +1385,22 @@ void usb_autosuspend_device(struct usb_device *udev) * This routine should be called when a core subsystem thinks @udev may * be ready to autosuspend. * - * @udev's usage counter left unchanged. If it or any of the usage counters - * for an active interface is greater than 0, or autosuspend is not allowed - * for any other reason, no autosuspend request will be queued. + * @udev's usage counter left unchanged. If it is 0 and all the interfaces + * are inactive then an autosuspend will be attempted. The attempt may + * fail or be delayed. + * + * The caller must hold @udev's device lock. * * This routine can run only in process context. */ void usb_try_autosuspend_device(struct usb_device *udev) { - usb_autopm_do_device(udev, 0); - dev_vdbg(&udev->dev, "%s: cnt %d\n", - __func__, udev->pm_usage_cnt); + int status; + + status = pm_runtime_idle(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); } /** @@ -1511,16 +1409,15 @@ void usb_try_autosuspend_device(struct usb_device *udev) * * This routine should be called when a core subsystem wants to use @udev * and needs to guarantee that it is not suspended. No autosuspend will - * occur until usb_autosuspend_device is called. (Note that this will not - * prevent suspend events originating in the PM core.) Examples would be - * when @udev's device file in usbfs is opened or when a remote-wakeup + * occur until usb_autosuspend_device() is called. (Note that this will + * not prevent suspend events originating in the PM core.) Examples would + * be when @udev's device file in usbfs is opened or when a remote-wakeup * request is received. * * @udev's usage counter is incremented to prevent subsequent autosuspends. * However if the autoresume fails then the usage counter is re-decremented. * - * Often the caller will hold @udev's device lock, but this is not - * necessary (and attempting it might cause deadlock). + * The caller must hold @udev's device lock. * * This routine can run only in process context. */ @@ -1528,42 +1425,14 @@ int usb_autoresume_device(struct usb_device *udev) { int status; - status = usb_autopm_do_device(udev, 1); - dev_vdbg(&udev->dev, "%s: status %d cnt %d\n", - __func__, status, udev->pm_usage_cnt); - return status; -} - -/* Internal routine to adjust an interface's usage counter and change - * its device's autosuspend state. - */ -static int usb_autopm_do_interface(struct usb_interface *intf, - int inc_usage_cnt) -{ - struct usb_device *udev = interface_to_usbdev(intf); - int status = 0; - - usb_pm_lock(udev); - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { - atomic_add(inc_usage_cnt, &intf->pm_usage_cnt); - udev->last_busy = jiffies; - if (inc_usage_cnt >= 0 && - atomic_read(&intf->pm_usage_cnt) > 0) { - if (udev->state == USB_STATE_SUSPENDED) - status = usb_resume_both(udev, - PMSG_AUTO_RESUME); - if (status != 0) - atomic_sub(inc_usage_cnt, &intf->pm_usage_cnt); - else - udev->last_busy = jiffies; - } else if (inc_usage_cnt <= 0 && - atomic_read(&intf->pm_usage_cnt) <= 0) { - status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); - } - } - usb_pm_unlock(udev); + status = pm_runtime_get_sync(&udev->dev); + if (status < 0) + pm_runtime_put_sync(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } @@ -1577,34 +1446,25 @@ static int usb_autopm_do_interface(struct usb_interface *intf, * closed. * * The routine decrements @intf's usage counter. When the counter reaches - * 0, a delayed autosuspend request for @intf's device is queued. When - * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all - * the other usage counters for the sibling interfaces and @intf's - * usb_device, the device and all its interfaces will be autosuspended. - * - * Note that @intf->pm_usage_cnt is owned by the interface driver. The - * core will not change its value other than the increment and decrement - * in usb_autopm_get_interface and usb_autopm_put_interface. The driver - * may use this simple counter-oriented discipline or may set the value - * any way it likes. + * 0, a delayed autosuspend request for @intf's device is attempted. The + * attempt may fail (see autosuspend_check()). * * If the driver has set @intf->needs_remote_wakeup then autosuspend will * take place only if the device's remote-wakeup facility is enabled. * - * Suspend method calls queued by this routine can arrive at any time - * while @intf is resumed and its usage counter is equal to 0. They are - * not protected by the usb_device's lock but only by its pm_mutex. - * Drivers must provide their own synchronization. - * * This routine can run only in process context. */ void usb_autopm_put_interface(struct usb_interface *intf) { - int status; + struct usb_device *udev = interface_to_usbdev(intf); + int status; - status = usb_autopm_do_interface(intf, -1); - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + status = pm_runtime_put_sync(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1612,11 +1472,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be decremented * - * This routine does essentially the same thing as - * usb_autopm_put_interface(): it decrements @intf's usage counter and - * queues a delayed autosuspend request if the counter is <= 0. The - * difference is that it does not acquire the device's pm_mutex; - * callers must handle all synchronization issues themselves. + * This routine does much the same thing as usb_autopm_put_interface(): + * It decrements @intf's usage counter and schedules a delayed + * autosuspend request if the counter is <= 0. The difference is that it + * does not perform any synchronization; callers should hold a private + * lock and handle all synchronization issues themselves. * * Typically a driver would call this routine during an URB's completion * handler, if no more URBs were pending. @@ -1626,28 +1486,58 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); void usb_autopm_put_interface_async(struct usb_interface *intf) { struct usb_device *udev = interface_to_usbdev(intf); + unsigned long last_busy; int status = 0; - if (intf->condition == USB_INTERFACE_UNBOUND) { - status = -ENODEV; - } else { - udev->last_busy = jiffies; - atomic_dec(&intf->pm_usage_cnt); - if (udev->autosuspend_disabled || udev->autosuspend_delay < 0) - status = -EPERM; - else if (atomic_read(&intf->pm_usage_cnt) <= 0 && - !timer_pending(&udev->autosuspend.timer)) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + last_busy = udev->last_busy; + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + pm_runtime_put_noidle(&intf->dev); + + if (!udev->autosuspend_disabled) { + /* Optimization: Don't schedule a delayed autosuspend if + * the timer is already running and the expiration time + * wouldn't change. + * + * We have to use the interface's timer. Attempts to + * schedule a suspend for the device would fail because + * the interface is still active. + */ + if (intf->dev.power.timer_expires == 0 || + round_jiffies_up(last_busy) != + round_jiffies_up(jiffies)) { + status = pm_schedule_suspend(&intf->dev, + jiffies_to_msecs( round_jiffies_up_relative( - udev->autosuspend_delay)); + udev->autosuspend_delay))); } } - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); /** + * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be decremented + * + * This routine decrements @intf's usage counter but does not carry out an + * autosuspend. + * + * This routine can run in atomic context. + */ +void usb_autopm_put_interface_no_suspend(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + pm_runtime_put_noidle(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend); + +/** * usb_autopm_get_interface - increment a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be incremented * @@ -1659,25 +1549,8 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); * or @intf is unbound. A typical example would be a character-device * driver when its device file is opened. * - * - * The routine increments @intf's usage counter. (However if the - * autoresume fails then the counter is re-decremented.) So long as the - * counter is greater than 0, autosuspend will not be allowed for @intf - * or its usb_device. When the driver is finished using @intf it should - * call usb_autopm_put_interface() to decrement the usage counter and - * queue a delayed autosuspend request (if the counter is <= 0). - * - * - * Note that @intf->pm_usage_cnt is owned by the interface driver. The - * core will not change its value other than the increment and decrement - * in usb_autopm_get_interface and usb_autopm_put_interface. The driver - * may use this simple counter-oriented discipline or may set the value - * any way it likes. - * - * Resume method calls generated by this routine can arrive at any time - * while @intf is suspended. They are not protected by the usb_device's - * lock but only by its pm_mutex. Drivers must provide their own - * synchronization. + * @intf's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the counter is re-decremented. * * This routine can run only in process context. */ @@ -1685,9 +1558,16 @@ int usb_autopm_get_interface(struct usb_interface *intf) { int status; - status = usb_autopm_do_interface(intf, 1); - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + status = pm_runtime_get_sync(&intf->dev); + if (status < 0) + pm_runtime_put_sync(&intf->dev); + else + atomic_inc(&intf->pm_usage_cnt); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); @@ -1697,149 +1577,207 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface); * @intf: the usb_interface whose counter should be incremented * * This routine does much the same thing as - * usb_autopm_get_interface(): it increments @intf's usage counter and - * queues an autoresume request if the result is > 0. The differences - * are that it does not acquire the device's pm_mutex (callers must - * handle all synchronization issues themselves), and it does not - * autoresume the device directly (it only queues a request). After a - * successful call, the device will generally not yet be resumed. + * usb_autopm_get_interface(): It increments @intf's usage counter and + * queues an autoresume request if the device is suspended. The + * differences are that it does not perform any synchronization (callers + * should hold a private lock and handle all synchronization issues + * themselves), and it does not autoresume the device directly (it only + * queues a request). After a successful call, the device may not yet be + * resumed. * * This routine can run in atomic context. */ int usb_autopm_get_interface_async(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - int status = 0; + int status = 0; + enum rpm_status s; - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { + /* Don't request a resume unless the interface is already suspending + * or suspended. Doing so would force a running suspend timer to be + * cancelled. + */ + pm_runtime_get_noresume(&intf->dev); + s = ACCESS_ONCE(intf->dev.power.runtime_status); + if (s == RPM_SUSPENDING || s == RPM_SUSPENDED) + status = pm_request_resume(&intf->dev); + + if (status < 0 && status != -EINPROGRESS) + pm_runtime_put_noidle(&intf->dev); + else atomic_inc(&intf->pm_usage_cnt); - if (atomic_read(&intf->pm_usage_cnt) > 0 && - udev->state == USB_STATE_SUSPENDED) - queue_work(ksuspend_usb_wq, &udev->autoresume); - } - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async); -#else - -void usb_autosuspend_work(struct work_struct *work) -{} - -void usb_autoresume_work(struct work_struct *work) -{} - -#endif /* CONFIG_USB_SUSPEND */ - /** - * usb_external_suspend_device - external suspend of a USB device and its interfaces - * @udev: the usb_device to suspend - * @msg: Power Management message describing this state transition + * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be incremented * - * This routine handles external suspend requests: ones not generated - * internally by a USB driver (autosuspend) but rather coming from the user - * (via sysfs) or the PM core (system sleep). The suspend will be carried - * out regardless of @udev's usage counter or those of its interfaces, - * and regardless of whether or not remote wakeup is enabled. Of course, - * interface drivers still have the option of failing the suspend (if - * there are unsuspended children, for example). + * This routine increments @intf's usage counter but does not carry out an + * autoresume. * - * The caller must hold @udev's device lock. + * This routine can run in atomic context. */ -int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg) +void usb_autopm_get_interface_no_resume(struct usb_interface *intf) { - int status; + struct usb_device *udev = interface_to_usbdev(intf); - do_unbind_rebind(udev, DO_UNBIND); - usb_pm_lock(udev); - status = usb_suspend_both(udev, msg); - usb_pm_unlock(udev); - return status; + udev->last_busy = jiffies; + atomic_inc(&intf->pm_usage_cnt); + pm_runtime_get_noresume(&intf->dev); } +EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); -/** - * usb_external_resume_device - external resume of a USB device and its interfaces - * @udev: the usb_device to resume - * @msg: Power Management message describing this state transition - * - * This routine handles external resume requests: ones not generated - * internally by a USB driver (autoresume) but rather coming from the user - * (via sysfs), the PM core (system resume), or the device itself (remote - * wakeup). @udev's usage counter is unaffected. - * - * The caller must hold @udev's device lock. - */ -int usb_external_resume_device(struct usb_device *udev, pm_message_t msg) +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) { - int status; + int i; + struct usb_interface *intf; + unsigned long suspend_time, j; - usb_pm_lock(udev); - status = usb_resume_both(udev, msg); - udev->last_busy = jiffies; - usb_pm_unlock(udev); - if (status == 0) - do_unbind_rebind(udev, DO_REBIND); + /* Fail if autosuspend is disabled, or any interfaces are in use, or + * any interface drivers require remote wakeup but it isn't available. + */ + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; - /* Now that the device is awake, we can start trying to autosuspend - * it again. */ - if (status == 0) - usb_try_autosuspend_device(udev); - return status; + /* We don't need to check interfaces that are + * disabled for runtime PM. Either they are unbound + * or else their drivers don't support autosuspend + * and so they are permanently active. + */ + if (intf->dev.power.disable_depth) + continue; + if (atomic_read(&intf->dev.power.usage_count) > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, "remote wakeup needed " + "for autosuspend\n"); + return -EOPNOTSUPP; + } + + /* Don't allow autosuspend if the device will need + * a reset-resume and any of its interface drivers + * doesn't include support or needs remote wakeup. + */ + if (udev->quirks & USB_QUIRK_RESET_RESUME) { + struct usb_driver *driver; + + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume || + intf->needs_remote_wakeup) + return -EOPNOTSUPP; + } + } + } + + /* If everything is okay but the device hasn't been idle for long + * enough, queue a delayed autosuspend request. + */ + j = ACCESS_ONCE(jiffies); + suspend_time = udev->last_busy + udev->autosuspend_delay; + if (time_before(j, suspend_time)) { + pm_schedule_suspend(&udev->dev, jiffies_to_msecs( + round_jiffies_up_relative(suspend_time - j))); + return -EAGAIN; + } + return 0; } -int usb_suspend(struct device *dev, pm_message_t msg) +static int usb_runtime_suspend(struct device *dev) { - struct usb_device *udev; - - udev = to_usb_device(dev); + int status = 0; - /* If udev is already suspended, we can skip this suspend and - * we should also skip the upcoming system resume. High-speed - * root hubs are an exception; they need to resume whenever the - * system wakes up in order for USB-PERSIST port handover to work - * properly. + /* A USB device can be suspended if it passes the various autosuspend + * checks. Runtime suspend for a USB device means suspending all the + * interfaces and then the device itself. */ - if (udev->state == USB_STATE_SUSPENDED) { - if (udev->parent || udev->speed != USB_SPEED_HIGH) - udev->skip_sys_resume = 1; - return 0; + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + if (autosuspend_check(udev) != 0) + return -EAGAIN; + + status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); + + /* If an interface fails the suspend, adjust the last_busy + * time so that we don't get another suspend attempt right + * away. + */ + if (status) { + udev->last_busy = jiffies + + (udev->autosuspend_delay == 0 ? + HZ/2 : 0); + } + + /* Prevent the parent from suspending immediately after */ + else if (udev->parent) { + udev->parent->last_busy = jiffies; + } } - udev->skip_sys_resume = 0; - return usb_external_suspend_device(udev, msg); + /* Runtime suspend for a USB interface doesn't mean anything. */ + return status; } -int usb_resume(struct device *dev, pm_message_t msg) +static int usb_runtime_resume(struct device *dev) { - struct usb_device *udev; - int status; + /* Runtime resume for a USB device means resuming both the device + * and all its interfaces. + */ + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + int status; - udev = to_usb_device(dev); + status = usb_resume_both(udev, PMSG_AUTO_RESUME); + udev->last_busy = jiffies; + return status; + } - /* If udev->skip_sys_resume is set then udev was already suspended - * when the system sleep started, so we don't want to resume it - * during this system wakeup. - */ - if (udev->skip_sys_resume) - return 0; - status = usb_external_resume_device(udev, msg); + /* Runtime resume for a USB interface doesn't mean anything. */ + return 0; +} - /* Avoid PM error messages for devices disconnected while suspended - * as we'll display regular disconnect messages just a bit later. +static int usb_runtime_idle(struct device *dev) +{ + /* An idle USB device can be suspended if it passes the various + * autosuspend checks. An idle interface can be suspended at + * any time. */ - if (status == -ENODEV) - return 0; - return status; + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + if (autosuspend_check(udev) != 0) + return 0; + } + + pm_runtime_suspend(dev); + return 0; } -#endif /* CONFIG_PM */ +static struct dev_pm_ops usb_bus_pm_ops = { + .runtime_suspend = usb_runtime_suspend, + .runtime_resume = usb_runtime_resume, + .runtime_idle = usb_runtime_idle, +}; + +#else + +#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL) + +#endif /* CONFIG_USB_SUSPEND */ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, + .pm = &usb_bus_pm_ops, }; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index fdfaa7885515..d26b9ea981f9 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -186,6 +186,7 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); + device_enable_async_suspend(&ep_dev->dev); retval = device_register(&ep_dev->dev); if (retval) diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index bfc6c2eea647..c3536f151f02 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -34,7 +34,6 @@ static int usb_open(struct inode * inode, struct file * file) int err = -ENODEV; const struct file_operations *old_fops, *new_fops = NULL; - lock_kernel(); down_read(&minor_rwsem); c = usb_minors[minor]; @@ -53,7 +52,6 @@ static int usb_open(struct inode * inode, struct file * file) fops_put(old_fops); done: up_read(&minor_rwsem); - unlock_kernel(); return err; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 2dcf906df569..15286533c15a 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pm_runtime.h> #include <linux/usb.h> #include <asm/io.h> @@ -37,6 +38,122 @@ /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ +#ifdef CONFIG_PM_SLEEP + +/* Coordinate handoffs between EHCI and companion controllers + * during system resume + */ + +static DEFINE_MUTEX(companions_mutex); + +#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI +#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI +#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI + +enum companion_action { + SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS +}; + +static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, + enum companion_action action) +{ + struct pci_dev *companion; + struct usb_hcd *companion_hcd; + unsigned int slot = PCI_SLOT(pdev->devfn); + + /* Iterate through other PCI functions in the same slot. + * If pdev is OHCI or UHCI then we are looking for EHCI, and + * vice versa. + */ + companion = NULL; + for (;;) { + companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion); + if (!companion) + break; + if (companion->bus != pdev->bus || + PCI_SLOT(companion->devfn) != slot) + continue; + + companion_hcd = pci_get_drvdata(companion); + if (!companion_hcd) + continue; + + /* For SET_HS_COMPANION, store a pointer to the EHCI bus in + * the OHCI/UHCI companion bus structure. + * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus + * in the OHCI/UHCI companion bus structure. + * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI + * companion controllers have fully resumed. + */ + + if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) && + companion->class == CL_EHCI) { + /* action must be SET_HS_COMPANION */ + dev_dbg(&companion->dev, "HS companion for %s\n", + dev_name(&pdev->dev)); + hcd->self.hs_companion = &companion_hcd->self; + + } else if (pdev->class == CL_EHCI && + (companion->class == CL_OHCI || + companion->class == CL_UHCI)) { + switch (action) { + case SET_HS_COMPANION: + dev_dbg(&pdev->dev, "HS companion for %s\n", + dev_name(&companion->dev)); + companion_hcd->self.hs_companion = &hcd->self; + break; + case CLEAR_HS_COMPANION: + companion_hcd->self.hs_companion = NULL; + break; + case WAIT_FOR_COMPANIONS: + device_pm_wait_for_dev(&pdev->dev, + &companion->dev); + break; + } + } + } +} + +static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + mutex_lock(&companions_mutex); + dev_set_drvdata(&pdev->dev, hcd); + companion_common(pdev, hcd, SET_HS_COMPANION); + mutex_unlock(&companions_mutex); +} + +static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + mutex_lock(&companions_mutex); + dev_set_drvdata(&pdev->dev, NULL); + + /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */ + if (pdev->class == CL_OHCI || pdev->class == CL_UHCI) + hcd->self.hs_companion = NULL; + + /* Otherwise search for companion buses and clear their pointers */ + else + companion_common(pdev, hcd, CLEAR_HS_COMPANION); + mutex_unlock(&companions_mutex); +} + +static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + /* Only EHCI controllers need to wait. + * No locking is needed because a controller cannot be resumed + * while one of its companions is getting unbound. + */ + if (pdev->class == CL_EHCI) + companion_common(pdev, hcd, WAIT_FOR_COMPANIONS); +} + +#else /* !CONFIG_PM_SLEEP */ + +static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} +static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} +static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {} + +#endif /* !CONFIG_PM_SLEEP */ /*-------------------------------------------------------------------------*/ @@ -123,7 +240,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (region == PCI_ROM_RESOURCE) { dev_dbg(&dev->dev, "no i/o regions available\n"); retval = -EBUSY; - goto err1; + goto err2; } } @@ -132,6 +249,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; + set_hs_companion(dev, hcd); return retval; err4: @@ -142,6 +260,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } else release_region(hcd->rsrc_start, hcd->rsrc_len); err2: + clear_hs_companion(dev, hcd); usb_put_hcd(hcd); err1: pci_disable_device(dev); @@ -180,6 +299,7 @@ void usb_hcd_pci_remove(struct pci_dev *dev) } else { release_region(hcd->rsrc_start, hcd->rsrc_len); } + clear_hs_companion(dev, hcd); usb_put_hcd(hcd); pci_disable_device(dev); } @@ -344,6 +464,11 @@ static int resume_common(struct device *dev, bool hibernated) clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); if (hcd->driver->pci_resume) { + /* This call should be made only during system resume, + * not during runtime resume. + */ + wait_for_companions(pci_dev, hcd); + retval = hcd->driver->pci_resume(hcd, hibernated); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 80995ef0868c..2f8cedda8007 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -39,6 +39,7 @@ #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/mutex.h> +#include <linux/pm_runtime.h> #include <linux/usb.h> @@ -141,7 +142,7 @@ static const u8 usb3_rh_dev_descriptor[18] = { 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */ - 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ 0x03, /* __u8 iManufacturer; */ @@ -1670,11 +1671,16 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, } } for (i = 0; i < num_intfs; ++i) { + struct usb_host_interface *first_alt; + int iface_num; + + first_alt = &new_config->intf_cache[i]->altsetting[0]; + iface_num = first_alt->desc.bInterfaceNumber; /* Set up endpoints for alternate interface setting 0 */ - alt = usb_find_alt_setting(new_config, i, 0); + alt = usb_find_alt_setting(new_config, iface_num, 0); if (!alt) /* No alt setting 0? Pick the first setting. */ - alt = &new_config->intf_cache[i]->altsetting[0]; + alt = first_alt; for (j = 0; j < alt->desc.bNumEndpoints; j++) { ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]); @@ -1853,6 +1859,10 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) return status; } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_SUSPEND + /* Workqueue routine for root-hub remote wakeup */ static void hcd_resume_work(struct work_struct *work) { @@ -1860,8 +1870,7 @@ static void hcd_resume_work(struct work_struct *work) struct usb_device *udev = hcd->self.root_hub; usb_lock_device(udev); - usb_mark_last_busy(udev); - usb_external_resume_device(udev, PMSG_REMOTE_RESUME); + usb_remote_wakeup(udev); usb_unlock_device(udev); } @@ -1880,12 +1889,12 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) - queue_work(ksuspend_usb_wq, &hcd->wakeup_work); + queue_work(pm_wq, &hcd->wakeup_work); spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif +#endif /* CONFIG_USB_SUSPEND */ /*-------------------------------------------------------------------------*/ @@ -2030,7 +2039,7 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif mutex_init(&hcd->bandwidth_mutex); @@ -2230,7 +2239,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND cancel_work_sync(&hcd->wakeup_work); #endif diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index bbe2b924aae8..a3cdb09734ab 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -80,7 +80,7 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -248,7 +248,7 @@ struct hc_driver { /* xHCI specific functions */ /* Called by usb_alloc_dev to alloc HC device structures */ int (*alloc_dev)(struct usb_hcd *, struct usb_device *); - /* Called by usb_release_dev to free HC device structures */ + /* Called by usb_disconnect to free HC device structures */ void (*free_dev)(struct usb_hcd *, struct usb_device *); /* Bandwidth computation functions */ @@ -286,6 +286,7 @@ struct hc_driver { */ int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); + int (*reset_device)(struct usb_hcd *, struct usb_device *); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); @@ -463,16 +464,20 @@ extern int usb_find_interface_driver(struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) #ifdef CONFIG_PM -extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); extern void usb_root_hub_lost_power(struct usb_device *rhdev); extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_SUSPEND +extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_USB_SUSPEND */ + /* * USB device fs stuff diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 35cc8b9ba1f5..0940ccd6f4f4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -22,6 +22,7 @@ #include <linux/kthread.h> #include <linux/mutex.h> #include <linux/freezer.h> +#include <linux/pm_runtime.h> #include <asm/uaccess.h> #include <asm/byteorder.h> @@ -71,7 +72,6 @@ struct usb_hub { unsigned mA_per_port; /* current for each child */ - unsigned init_done:1; unsigned limited_power:1; unsigned quiescing:1; unsigned disconnected:1; @@ -820,7 +820,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) } init3: hub->quiescing = 0; - hub->init_done = 1; status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) @@ -861,11 +860,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) int i; cancel_delayed_work_sync(&hub->init_work); - if (!hub->init_done) { - hub->init_done = 1; - usb_autopm_put_interface_no_suspend( - to_usb_interface(hub->intfdev)); - } /* khubd and related activity won't re-trigger */ hub->quiescing = 1; @@ -1224,6 +1218,9 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* Hubs have proper suspend/resume support */ + usb_enable_autosuspend(hdev); + if (hdev->level == MAX_TOPO_LEVEL) { dev_err(&intf->dev, "Unsupported bus topology: hub nested too deep\n"); @@ -1402,10 +1399,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } - if (udev->state == USB_STATE_SUSPENDED) { - udev->discon_suspended = 1; + if (udev->state == USB_STATE_SUSPENDED) udev->active_duration -= jiffies; - } udev->state = USB_STATE_NOTATTACHED; } @@ -1448,11 +1443,11 @@ void usb_set_device_state(struct usb_device *udev, || new_state == USB_STATE_SUSPENDED) ; /* No change to wakeup settings */ else if (new_state == USB_STATE_CONFIGURED) - device_init_wakeup(&udev->dev, + device_set_wakeup_capable(&udev->dev, (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP)); else - device_init_wakeup(&udev->dev, 0); + device_set_wakeup_capable(&udev->dev, 0); } if (udev->state == USB_STATE_SUSPENDED && new_state != USB_STATE_SUSPENDED) @@ -1529,31 +1524,15 @@ static void update_address(struct usb_device *udev, int devnum) udev->devnum = devnum; } -#ifdef CONFIG_USB_SUSPEND - -static void usb_stop_pm(struct usb_device *udev) +static void hub_free_dev(struct usb_device *udev) { - /* Synchronize with the ksuspend thread to prevent any more - * autosuspend requests from being submitted, and decrement - * the parent's count of unsuspended children. - */ - usb_pm_lock(udev); - if (udev->parent && !udev->discon_suspended) - usb_autosuspend_device(udev->parent); - usb_pm_unlock(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); - /* Stop any autosuspend or autoresume requests already submitted */ - cancel_delayed_work_sync(&udev->autosuspend); - cancel_work_sync(&udev->autoresume); + /* Root hubs aren't real devices, so don't free HCD resources */ + if (hcd->driver->free_dev && udev->parent) + hcd->driver->free_dev(hcd, udev); } -#else - -static inline void usb_stop_pm(struct usb_device *udev) -{ } - -#endif - /** * usb_disconnect - disconnect a device (usbcore-internal) * @pdev: pointer to device being disconnected @@ -1622,7 +1601,7 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); - usb_stop_pm(udev); + hub_free_dev(udev); put_device(&udev->dev); } @@ -1799,9 +1778,18 @@ int usb_new_device(struct usb_device *udev) { int err; - /* Increment the parent's count of unsuspended children */ - if (udev->parent) - usb_autoresume_device(udev->parent); + if (udev->parent) { + /* Initialize non-root-hub device wakeup to disabled; + * device (un)configuration controls wakeup capable + * sysfs power/wakeup controls wakeup enabled/disabled + */ + device_init_wakeup(&udev->dev, 0); + device_set_wakeup_enable(&udev->dev, 1); + } + + /* Tell the runtime-PM framework the device is active */ + pm_runtime_set_active(&udev->dev); + pm_runtime_enable(&udev->dev); usb_detect_quirks(udev); err = usb_enumerate_device(udev); /* Read descriptors */ @@ -1817,6 +1805,7 @@ int usb_new_device(struct usb_device *udev) /* Tell the world! */ announce_device(udev); + device_enable_async_suspend(&udev->dev); /* Register the device. The device driver is responsible * for configuring the device and invoking the add-device * notifier chain (used by usbfs and possibly others). @@ -1832,7 +1821,8 @@ int usb_new_device(struct usb_device *udev) fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - usb_stop_pm(udev); + pm_runtime_disable(&udev->dev); + pm_runtime_set_suspended(&udev->dev); return err; } @@ -1981,7 +1971,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_RESET) && (portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) - udev->speed = USB_SPEED_VARIABLE; + udev->speed = USB_SPEED_WIRELESS; else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; else if (portstatus & USB_PORT_STAT_LOW_SPEED) @@ -2007,7 +1997,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay) { int i, status; + struct usb_hcd *hcd; + hcd = bus_to_hcd(udev->bus); /* Block EHCI CF initialization during the port reset. * Some companion controllers don't like it when they mix. */ @@ -2035,6 +2027,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1, /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); update_address(udev, 0); + if (hcd->driver->reset_device) { + status = hcd->driver->reset_device(hcd, udev); + if (status < 0) { + dev_err(&udev->dev, "Cannot reset " + "HCD device state\n"); + break; + } + } /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: @@ -2380,14 +2380,17 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } /* caller has locked udev */ -static int remote_wakeup(struct usb_device *udev) +int usb_remote_wakeup(struct usb_device *udev) { int status = 0; if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - usb_mark_last_busy(udev); - status = usb_external_resume_device(udev, PMSG_REMOTE_RESUME); + status = usb_autoresume_device(udev); + if (status == 0) { + /* Let the drivers do their thing, then... */ + usb_autosuspend_device(udev); + } } return status; } @@ -2424,11 +2427,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } -static inline int remote_wakeup(struct usb_device *udev) -{ - return 0; -} - #endif static int hub_suspend(struct usb_interface *intf, pm_message_t msg) @@ -2495,11 +2493,6 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); #else /* CONFIG_PM */ -static inline int remote_wakeup(struct usb_device *udev) -{ - return 0; -} - #define hub_suspend NULL #define hub_resume NULL #define hub_reset_resume NULL @@ -2644,14 +2637,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if ((hcd->driver->flags & HCD_USB3) && udev->config) { - /* FIXME this will need special handling by the xHCI driver. */ - dev_dbg(&udev->dev, - "xHCI reset of configured device " - "not supported yet.\n"); - retval = -EINVAL; - goto fail; - } else if (!udev->config && oldspeed == USB_SPEED_SUPER) { + if (!udev->config && oldspeed == USB_SPEED_SUPER) { /* Don't reset USB 3.0 devices during an initial setup */ usb_set_device_state(udev, USB_STATE_DEFAULT); } else { @@ -2677,7 +2663,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, */ switch (udev->speed) { case USB_SPEED_SUPER: - case USB_SPEED_VARIABLE: /* fixed at 512 */ + case USB_SPEED_WIRELESS: /* fixed at 512 */ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); break; case USB_SPEED_HIGH: /* fixed at 64 */ @@ -2705,7 +2691,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, case USB_SPEED_SUPER: speed = "super"; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: speed = "variable"; type = "Wireless "; break; @@ -3005,7 +2991,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* For a suspended device, treat this as a * remote wakeup event. */ - status = remote_wakeup(udev); + status = usb_remote_wakeup(udev); #endif } else { @@ -3191,6 +3177,7 @@ loop_disable: loop: usb_ep0_reinit(udev); release_address(udev); + hub_free_dev(udev); usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; @@ -3258,7 +3245,7 @@ static void hub_events(void) * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev); if (unlikely(hub->disconnected)) - goto loop2; + goto loop_disconnected; /* If the hub has died, clean up after it */ if (hdev->state == USB_STATE_NOTATTACHED) { @@ -3351,7 +3338,7 @@ static void hub_events(void) msleep(10); usb_lock_device(udev); - ret = remote_wakeup(hdev-> + ret = usb_remote_wakeup(hdev-> children[i-1]); usb_unlock_device(udev); if (ret < 0) @@ -3418,7 +3405,7 @@ static void hub_events(void) * kick_khubd() and allow autosuspend. */ usb_autopm_put_interface(intf); - loop2: + loop_disconnected: usb_unlock_device(hdev); kref_put(&hub->kref, hub_release); @@ -3445,7 +3432,7 @@ static int hub_thread(void *__unused) return 0; } -static struct usb_device_id hub_id_table [] = { +static const struct usb_device_id hub_id_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 9bc95fec793f..cd220277c6c3 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1316,7 +1316,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) alt = usb_altnum_to_altsetting(iface, alternate); if (!alt) { - dev_warn(&dev->dev, "selecting invalid altsetting %d", + dev_warn(&dev->dev, "selecting invalid altsetting %d\n", alternate); return -EINVAL; } @@ -1471,7 +1471,7 @@ int usb_reset_configuration(struct usb_device *dev) /* If not, reinstate the old alternate settings */ if (retval < 0) { reset_old_alts: - for (; i >= 0; i--) { + for (i--; i >= 0; i--) { struct usb_interface *intf = config->interface[i]; struct usb_host_interface *alt; @@ -1843,7 +1843,6 @@ free_interfaces: intf->dev.dma_mask = dev->dev.dma_mask; INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); device_initialize(&intf->dev); - mark_quiesced(intf); dev_set_name(&intf->dev, "%d-%s:%d.%d", dev->bus->busnum, dev->devpath, configuration, alt->desc.bInterfaceNumber); @@ -1867,6 +1866,7 @@ free_interfaces: "adding %s (config #%d, interface %d)\n", dev_name(&intf->dev), configuration, intf->cur_altsetting->desc.bInterfaceNumber); + device_enable_async_suspend(&intf->dev); ret = device_add(&intf->dev); if (ret != 0) { dev_err(&dev->dev, "device_add(%s) --> %d\n", diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab93918d9207..f073c5cb4e7b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -103,10 +103,19 @@ void usb_detect_quirks(struct usb_device *udev) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); - /* By default, disable autosuspend for all non-hubs */ #ifdef CONFIG_USB_SUSPEND - if (udev->descriptor.bDeviceClass != USB_CLASS_HUB) - udev->autosuspend_disabled = 1; + + /* By default, disable autosuspend for all devices. The hub driver + * will enable it for hubs. + */ + usb_disable_autosuspend(udev); + + /* Autosuspend can also be disabled if the initial autosuspend_delay + * is negative. + */ + if (udev->autosuspend_delay < 0) + usb_autoresume_device(udev); + #endif /* For the present, all devices default to USB-PERSIST enabled */ @@ -120,6 +129,7 @@ void usb_detect_quirks(struct usb_device *udev) * for all devices. It will affect things like hub resets * and EMF-related port disables. */ - udev->persist_enabled = 1; + if (!(udev->quirks & USB_QUIRK_RESET_MORPHS)) + udev->persist_enabled = 1; #endif /* CONFIG_PM */ } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5f3908f6e2dc..43c002e3a9aa 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -115,7 +115,7 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) case USB_SPEED_HIGH: speed = "480"; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: speed = "480"; break; case USB_SPEED_SUPER: @@ -191,6 +191,36 @@ show_quirks(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL); static ssize_t +show_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET_MORPHS)); +} + +static ssize_t +set_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int config; + + if (sscanf(buf, "%d", &config) != 1 || config < 0 || config > 1) + return -EINVAL; + usb_lock_device(udev); + if (config) + udev->quirks |= USB_QUIRK_RESET_MORPHS; + else + udev->quirks &= ~USB_QUIRK_RESET_MORPHS; + usb_unlock_device(udev); + return count; +} + +static DEVICE_ATTR(avoid_reset_quirk, S_IRUGO | S_IWUSR, + show_avoid_reset_quirk, set_avoid_reset_quirk); + +static ssize_t show_urbnum(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev; @@ -226,9 +256,10 @@ set_persist(struct device *dev, struct device_attribute *attr, if (sscanf(buf, "%d", &value) != 1) return -EINVAL; - usb_pm_lock(udev); + + usb_lock_device(udev); udev->persist_enabled = !!value; - usb_pm_unlock(udev); + usb_unlock_device(udev); return count; } @@ -315,20 +346,34 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int value; + int value, old_delay; + int rc; if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ || value <= - INT_MAX/HZ) return -EINVAL; value *= HZ; + usb_lock_device(udev); + old_delay = udev->autosuspend_delay; udev->autosuspend_delay = value; - if (value >= 0) - usb_try_autosuspend_device(udev); - else { - if (usb_autoresume_device(udev) == 0) + + if (old_delay < 0) { /* Autosuspend wasn't allowed */ + if (value >= 0) usb_autosuspend_device(udev); + } else { /* Autosuspend was allowed */ + if (value < 0) { + rc = usb_autoresume_device(udev); + if (rc < 0) { + count = rc; + udev->autosuspend_delay = old_delay; + } + } else { + usb_try_autosuspend_device(udev); + } } + + usb_unlock_device(udev); return count; } @@ -356,34 +401,25 @@ set_level(struct device *dev, struct device_attribute *attr, struct usb_device *udev = to_usb_device(dev); int len = count; char *cp; - int rc = 0; - int old_autosuspend_disabled; + int rc; cp = memchr(buf, '\n', count); if (cp) len = cp - buf; usb_lock_device(udev); - old_autosuspend_disabled = udev->autosuspend_disabled; - /* Setting the flags without calling usb_pm_lock is a subject to - * races, but who cares... - */ if (len == sizeof on_string - 1 && - strncmp(buf, on_string, len) == 0) { - udev->autosuspend_disabled = 1; - rc = usb_external_resume_device(udev, PMSG_USER_RESUME); + strncmp(buf, on_string, len) == 0) + rc = usb_disable_autosuspend(udev); - } else if (len == sizeof auto_string - 1 && - strncmp(buf, auto_string, len) == 0) { - udev->autosuspend_disabled = 0; - rc = usb_external_resume_device(udev, PMSG_USER_RESUME); + else if (len == sizeof auto_string - 1 && + strncmp(buf, auto_string, len) == 0) + rc = usb_enable_autosuspend(udev); - } else + else rc = -EINVAL; - if (rc) - udev->autosuspend_disabled = old_autosuspend_disabled; usb_unlock_device(udev); return (rc < 0 ? rc : count); } @@ -558,6 +594,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_version.attr, &dev_attr_maxchild.attr, &dev_attr_quirks.attr, + &dev_attr_avoid_reset_quirk.attr, &dev_attr_authorized.attr, &dev_attr_remove.attr, NULL, diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index e7cae1334693..27080561a1c2 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -387,6 +387,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { unsigned int orig_flags = urb->transfer_flags; unsigned int allowed; + static int pipetypes[4] = { + PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT + }; + + /* Check that the pipe's type matches the endpoint's type */ + if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) + return -EPIPE; /* The most suitable error code :-) */ /* enforce simple/standard policy */ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | @@ -430,7 +437,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) case USB_ENDPOINT_XFER_INT: /* too small? */ switch (dev->speed) { - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: if (urb->interval < 6) return -EINVAL; break; @@ -446,7 +453,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (urb->interval > (1 << 15)) return -EINVAL; max = 1 << 15; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: if (urb->interval > 16) return -EINVAL; break; @@ -473,7 +480,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) default: return -EINVAL; } - if (dev->speed != USB_SPEED_VARIABLE) { + if (dev->speed != USB_SPEED_WIRELESS) { /* Round down to a power of 2, no more than max */ urb->interval = min(max, 1 << ilog2(urb->interval)); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0daff0d968ba..1297e9b16a51 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,9 +49,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ -/* Workqueue for autosuspend and for remote wakeup of root hubs */ -struct workqueue_struct *ksuspend_usb_wq; - #ifdef CONFIG_USB_SUSPEND static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ @@ -228,9 +225,6 @@ static void usb_release_dev(struct device *dev) hcd = bus_to_hcd(udev->bus); usb_destroy_configuration(udev); - /* Root hubs aren't real devices, so don't free HCD resources */ - if (hcd->driver->free_dev && udev->parent) - hcd->driver->free_dev(hcd, udev); usb_put_hcd(hcd); kfree(udev->product); kfree(udev->manufacturer); @@ -264,23 +258,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) #ifdef CONFIG_PM -static int ksuspend_usb_init(void) -{ - /* This workqueue is supposed to be both freezable and - * singlethreaded. Its job doesn't justify running on more - * than one CPU. - */ - ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd"); - if (!ksuspend_usb_wq) - return -ENOMEM; - return 0; -} - -static void ksuspend_usb_cleanup(void) -{ - destroy_workqueue(ksuspend_usb_wq); -} - /* USB device Power-Management thunks. * There's no need to distinguish here between quiescing a USB device * and powering it down; the generic_suspend() routine takes care of @@ -296,7 +273,7 @@ static int usb_dev_prepare(struct device *dev) static void usb_dev_complete(struct device *dev) { /* Currently used only for rebinding interfaces */ - usb_resume(dev, PMSG_RESUME); /* Message event is meaningless */ + usb_resume(dev, PMSG_ON); /* FIXME: change to PMSG_COMPLETE */ } static int usb_dev_suspend(struct device *dev) @@ -342,9 +319,7 @@ static const struct dev_pm_ops usb_device_pm_ops = { #else -#define ksuspend_usb_init() 0 -#define ksuspend_usb_cleanup() do {} while (0) -#define usb_device_pm_ops (*(struct dev_pm_ops *)0) +#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL) #endif /* CONFIG_PM */ @@ -472,9 +447,6 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, INIT_LIST_HEAD(&dev->filelist); #ifdef CONFIG_PM - mutex_init(&dev->pm_mutex); - INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work); - INIT_WORK(&dev->autoresume, usb_autoresume_work); dev->autosuspend_delay = usb_autosuspend_delay * HZ; dev->connect_time = jiffies; dev->active_duration = -jiffies; @@ -1117,9 +1089,6 @@ static int __init usb_init(void) if (retval) goto out; - retval = ksuspend_usb_init(); - if (retval) - goto out; retval = bus_register(&usb_bus_type); if (retval) goto bus_register_failed; @@ -1159,7 +1128,7 @@ major_init_failed: bus_notifier_failed: bus_unregister(&usb_bus_type); bus_register_failed: - ksuspend_usb_cleanup(); + usb_debugfs_cleanup(); out: return retval; } @@ -1181,7 +1150,6 @@ static void __exit usb_exit(void) usb_hub_cleanup(); bus_unregister_notifier(&usb_bus_type, &usb_bus_nb); bus_unregister(&usb_bus_type); - ksuspend_usb_cleanup(); usb_debugfs_cleanup(); } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 4c36c7f512a0..cd882203ad34 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -55,24 +55,8 @@ extern void usb_major_cleanup(void); extern int usb_suspend(struct device *dev, pm_message_t msg); extern int usb_resume(struct device *dev, pm_message_t msg); -extern void usb_autosuspend_work(struct work_struct *work); -extern void usb_autoresume_work(struct work_struct *work); extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg); extern int usb_port_resume(struct usb_device *dev, pm_message_t msg); -extern int usb_external_suspend_device(struct usb_device *udev, - pm_message_t msg); -extern int usb_external_resume_device(struct usb_device *udev, - pm_message_t msg); - -static inline void usb_pm_lock(struct usb_device *udev) -{ - mutex_lock_nested(&udev->pm_mutex, udev->level); -} - -static inline void usb_pm_unlock(struct usb_device *udev) -{ - mutex_unlock(&udev->pm_mutex); -} #else @@ -86,9 +70,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) return 0; } -static inline void usb_pm_lock(struct usb_device *udev) {} -static inline void usb_pm_unlock(struct usb_device *udev) {} - #endif #ifdef CONFIG_USB_SUSPEND @@ -96,6 +77,7 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} extern void usb_autosuspend_device(struct usb_device *udev); extern void usb_try_autosuspend_device(struct usb_device *udev); extern int usb_autoresume_device(struct usb_device *udev); +extern int usb_remote_wakeup(struct usb_device *dev); #else @@ -106,9 +88,13 @@ static inline int usb_autoresume_device(struct usb_device *udev) return 0; } +static inline int usb_remote_wakeup(struct usb_device *udev) +{ + return 0; +} + #endif -extern struct workqueue_struct *ksuspend_usb_wq; extern struct bus_type usb_bus_type; extern struct device_type usb_device_type; extern struct device_type usb_if_device_type; @@ -138,23 +124,6 @@ static inline int is_usb_device_driver(struct device_driver *drv) for_devices; } -/* Interfaces and their "power state" are owned by usbcore */ - -static inline void mark_active(struct usb_interface *f) -{ - f->is_active = 1; -} - -static inline void mark_quiesced(struct usb_interface *f) -{ - f->is_active = 0; -} - -static inline int is_active(const struct usb_interface *f) -{ - return f->is_active; -} - /* for labeling diagnostics */ extern const char *usbcore_name; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 2958a1271b20..6e98a3697844 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -66,8 +66,6 @@ static struct ehci_dev ehci_dev; #define USB_DEBUG_DEVNUM 127 -#define DBGP_DATA_TOGGLE 0x8800 - #ifdef DBGP_DEBUG #define dbgp_printk printk static void dbgp_ehci_status(char *str) @@ -88,11 +86,6 @@ static inline void dbgp_ehci_status(char *str) { } static inline void dbgp_printk(const char *fmt, ...) { } #endif -static inline u32 dbgp_pid_update(u32 x, u32 tok) -{ - return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); -} - static inline u32 dbgp_len_update(u32 x, u32 len) { return (x & ~0x0f) | (len & 0x0f); @@ -136,6 +129,19 @@ static inline u32 dbgp_len_update(u32 x, u32 len) #define DBGP_MAX_PACKET 8 #define DBGP_TIMEOUT (250 * 1000) +#define DBGP_LOOPS 1000 + +static inline u32 dbgp_pid_write_update(u32 x, u32 tok) +{ + static int data0 = USB_PID_DATA1; + data0 ^= USB_PID_DATA_TOGGLE; + return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff); +} + +static inline u32 dbgp_pid_read_update(u32 x, u32 tok) +{ + return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff); +} static int dbgp_wait_until_complete(void) { @@ -180,7 +186,7 @@ static int dbgp_wait_until_done(unsigned ctrl) { u32 pids, lpid; int ret; - int loop = 3; + int loop = DBGP_LOOPS; retry: writel(ctrl | DBGP_GO, &ehci_debug->control); @@ -197,6 +203,8 @@ retry: */ if (ret == -DBGP_TIMEOUT && !dbgp_not_safe) dbgp_not_safe = 1; + if (ret == -DBGP_ERR_BAD && --loop > 0) + goto retry; return ret; } @@ -245,12 +253,20 @@ static inline void dbgp_get_data(void *buf, int size) bytes[i] = (hi >> (8*(i - 4))) & 0xff; } -static int dbgp_out(u32 addr, const char *bytes, int size) +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) { + int ret; + u32 addr; u32 pids, ctrl; + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_OUT); + pids = dbgp_pid_write_update(pids, USB_PID_OUT); ctrl = readl(&ehci_debug->control); ctrl = dbgp_len_update(ctrl, size); @@ -260,34 +276,7 @@ static int dbgp_out(u32 addr, const char *bytes, int size) dbgp_set_data(bytes, size); writel(addr, &ehci_debug->address); writel(pids, &ehci_debug->pids); - return dbgp_wait_until_done(ctrl); -} - -static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, - const char *bytes, int size) -{ - int ret; - int loops = 5; - u32 addr; - if (size > DBGP_MAX_PACKET) - return -1; - - addr = DBGP_EPADDR(devnum, endpoint); -try_again: - if (loops--) { - ret = dbgp_out(addr, bytes, size); - if (ret == -DBGP_ERR_BAD) { - int try_loops = 3; - do { - /* Emit a dummy packet to re-sync communication - * with the debug device */ - if (dbgp_out(addr, "12345678", 8) >= 0) { - udelay(2); - goto try_again; - } - } while (try_loops--); - } - } + ret = dbgp_wait_until_done(ctrl); return ret; } @@ -304,7 +293,7 @@ static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, addr = DBGP_EPADDR(devnum, endpoint); pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_IN); + pids = dbgp_pid_read_update(pids, USB_PID_IN); ctrl = readl(&ehci_debug->control); ctrl = dbgp_len_update(ctrl, size); @@ -362,7 +351,6 @@ static int dbgp_control_msg(unsigned devnum, int requesttype, return dbgp_bulk_read(devnum, 0, data, size); } - /* Find a PCI capability */ static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) { diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index ee411206c699..7460cd797f45 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -812,6 +812,16 @@ config USB_CDC_COMPOSITE Say "y" to link the driver statically, or "m" to build a dynamically linked module. +config USB_G_NOKIA + tristate "Nokia composite gadget" + depends on PHONET + help + The Nokia composite gadget provides support for acm, obex + and phonet in only one composite gadget driver. + + It's only really useful for N900 hardware. If you're building + a kernel for N900, say Y or M here. If unsure, say N. + config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 2e2c047262b7..43b51da8d727 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -43,6 +43,7 @@ g_mass_storage-objs := mass_storage.o g_printer-objs := printer.o g_cdc-objs := cdc2.o g_multi-objs := multi.o +g_nokia-objs := nokia.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -55,4 +56,5 @@ obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o obj-$(CONFIG_USB_G_MULTI) += g_multi.o +obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 043e04db2a05..12ac9cd32a07 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1656,9 +1656,7 @@ static int __init at91udc_probe(struct platform_device *pdev) if (!res) return -ENXIO; - if (!request_mem_region(res->start, - res->end - res->start + 1, - driver_name)) { + if (!request_mem_region(res->start, resource_size(res), driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; } @@ -1699,7 +1697,7 @@ static int __init at91udc_probe(struct platform_device *pdev) udc->ep[3].maxpacket = 64; } - udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1); + udc->udp_baseaddr = ioremap(res->start, resource_size(res)); if (!udc->udp_baseaddr) { retval = -ENOMEM; goto fail0a; @@ -1781,7 +1779,7 @@ fail0a: if (cpu_is_at91rm9200()) gpio_free(udc->board.pullup_pin); fail0: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } @@ -1813,7 +1811,7 @@ static int __exit at91udc_remove(struct platform_device *pdev) gpio_free(udc->board.pullup_pin); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); clk_put(udc->iclk); clk_put(udc->fclk); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 4e970cf0e29a..f79bdfe4bed9 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -320,7 +320,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc) static int vbus_is_present(struct usba_udc *udc) { if (gpio_is_valid(udc->vbus_pin)) - return gpio_get_value(udc->vbus_pin); + return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; /* No Vbus detection: Assume always present */ return 1; @@ -1763,7 +1763,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) if (!udc->driver) goto out; - vbus = gpio_get_value(udc->vbus_pin); + vbus = vbus_is_present(udc); if (vbus != udc->vbus_prev) { if (vbus) { toggle_bias(1); @@ -1914,14 +1914,14 @@ static int __init usba_udc_probe(struct platform_device *pdev) udc->vbus_pin = -ENODEV; ret = -ENOMEM; - udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + udc->regs = ioremap(regs->start, resource_size(regs)); if (!udc->regs) { dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n"); goto err_map_regs; } dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n", (unsigned long)regs->start, udc->regs); - udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1); + udc->fifo = ioremap(fifo->start, resource_size(fifo)); if (!udc->fifo) { dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n"); goto err_map_fifo; @@ -2000,6 +2000,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) if (gpio_is_valid(pdata->vbus_pin)) { if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; + udc->vbus_pin_inverted = pdata->vbus_pin_inverted; ret = request_irq(gpio_to_irq(udc->vbus_pin), usba_vbus_irq, 0, diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index f7baea307f0d..88a2e07a11a8 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -323,6 +323,7 @@ struct usba_udc { struct platform_device *pdev; int irq; int vbus_pin; + int vbus_pin_inverted; struct clk *pclk; struct clk *hclk; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index cd0914ec898e..65a5f94cbc04 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -265,16 +265,24 @@ struct usb_ep * __init usb_ep_autoconfig ( return ep; } - } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) { - /* single buffering is enough; maybe 8 byte fifo is too */ - ep = find_ep (gadget, "ep3in-bulk"); - if (ep && ep_matches (gadget, ep, desc)) - return ep; - - } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) { - ep = find_ep (gadget, "ep1-bulk"); +#ifdef CONFIG_BLACKFIN + } else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) { + if ((USB_ENDPOINT_XFER_BULK == type) || + (USB_ENDPOINT_XFER_ISOC == type)) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep (gadget, "ep5in"); + else + ep = find_ep (gadget, "ep6out"); + } else if (USB_ENDPOINT_XFER_INT == type) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep(gadget, "ep1in"); + else + ep = find_ep(gadget, "ep2out"); + } else + ep = NULL; if (ep && ep_matches (gadget, ep, desc)) return ep; +#endif } /* Second, look at endpoints until an unclaimed one looks usable */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 141372b6e7a1..400f80372d93 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -259,7 +259,7 @@ static struct usb_configuration rndis_config_driver = { /*-------------------------------------------------------------------------*/ -#ifdef USB_ETH_EEM +#ifdef CONFIG_USB_ETH_EEM static int use_eem = 1; #else static int use_eem; diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index d10353d46b86..e49c7325dce2 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -702,14 +702,6 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f) /* Some controllers can't support CDC ACM ... */ static inline bool can_support_cdc(struct usb_configuration *c) { - /* SH3 doesn't support multiple interfaces */ - if (gadget_is_sh(c->cdev->gadget)) - return false; - - /* sa1100 doesn't have a third interrupt endpoint */ - if (gadget_is_sa1100(c->cdev->gadget)) - return false; - /* everything else is *probably* fine ... */ return true; } diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index df77f6131c73..f1e3aad76c37 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -60,7 +60,7 @@ DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct uac_ac_header_descriptor_2 ac_header_desc = { +static struct uac_ac_header_descriptor_v1_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, @@ -124,7 +124,7 @@ static struct usb_audio_control_selector feature_unit = { }; #define OUTPUT_TERMINAL_ID 3 -static struct uac_output_terminal_descriptor output_terminal_desc = { +static struct uac_output_terminal_descriptor_v1 output_terminal_desc = { .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, @@ -154,7 +154,7 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = { }; /* B.4.2 Class-Specific AS Interface Descriptor */ -static struct uac_as_header_descriptor as_header_desc = { +static struct uac_as_header_descriptor_v1 as_header_desc = { .bLength = UAC_DT_AS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_AS_GENERAL, diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index ecf5bdd0ae06..2fff530efc19 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -497,12 +497,9 @@ static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) struct net_device *net; /* Enable zlps by default for ECM conformance; - * override for musb_hdrc (avoids txdma ovhead) - * and sa1100 (can't). + * override for musb_hdrc (avoids txdma ovhead). */ - ecm->port.is_zlp_ok = !( - gadget_is_sa1100(cdev->gadget) - || gadget_is_musbhdrc(cdev->gadget) + ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget) ); ecm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ecm\n"); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a37640eba434..5a3cdd08f1d0 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -368,7 +368,7 @@ struct fsg_common { struct task_struct *thread_task; /* Callback function to call when thread exits. */ - void (*thread_exits)(struct fsg_common *common); + int (*thread_exits)(struct fsg_common *common); /* Gadget's private data. */ void *private_data; @@ -392,8 +392,12 @@ struct fsg_config { const char *lun_name_format; const char *thread_name; - /* Callback function to call when thread exits. */ - void (*thread_exits)(struct fsg_common *common); + /* Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). */ + int (*thread_exits)(struct fsg_common *common); /* Gadget's private data. */ void *private_data; @@ -614,7 +618,12 @@ static int fsg_setup(struct usb_function *f, return -EDOM; VDBG(fsg, "get max LUN\n"); *(u8 *) req->buf = fsg->common->nluns - 1; - return 1; + + /* Respond with data/status */ + req->length = min((u16)1, w_length); + fsg->common->ep0req_name = + ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out"; + return ep0_queue(fsg->common); } VDBG(fsg, @@ -1041,7 +1050,7 @@ static void invalidate_sub(struct fsg_lun *curlun) unsigned long rc; rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); - VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc); + VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); } static int do_verify(struct fsg_common *common) @@ -2524,14 +2533,6 @@ static void handle_exception(struct fsg_common *common) case FSG_STATE_CONFIG_CHANGE: rc = do_set_config(common, new_config); - if (common->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) { /* STALL on errors */ - DBG(common, "ep0 set halt\n"); - usb_ep_set_halt(common->ep0); - } else { /* Complete the status stage */ - ep0_queue(common); - } break; case FSG_STATE_EXIT: @@ -2615,8 +2616,20 @@ static int fsg_main_thread(void *common_) common->thread_task = NULL; spin_unlock_irq(&common->lock); - if (common->thread_exits) - common->thread_exits(common); + if (!common->thread_exits || common->thread_exits(common) < 0) { + struct fsg_lun *curlun = common->luns; + unsigned i = common->nluns; + + down_write(&common->filesem); + for (; i--; ++curlun) { + if (!fsg_lun_is_open(curlun)) + continue; + + fsg_lun_close(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; + } + up_write(&common->filesem); + } /* Let the unbind and cleanup routines know the thread has exited */ complete_and_exit(&common->thread_notifier, 0); @@ -2763,10 +2776,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, if (cfg->release != 0xffff) { i = cfg->release; } else { - /* The sa1100 controller is not supported */ - i = gadget_is_sa1100(gadget) - ? -1 - : usb_gadget_controller_number(gadget); + i = usb_gadget_controller_number(gadget); if (i >= 0) { i = 0x0300 + i; } else { @@ -2791,8 +2801,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, * disable stalls. */ common->can_stall = cfg->can_stall && - !(gadget_is_sh(common->gadget) || - gadget_is_at91(common->gadget)); + !(gadget_is_at91(common->gadget)); spin_lock_init(&common->lock); @@ -2852,7 +2861,6 @@ error_release: /* Call fsg_common_release() directly, ref might be not * initialised */ fsg_common_release(&common->ref); - complete(&common->thread_notifier); return ERR_PTR(rc); } diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 95dae4c1ea40..a30e60c7f129 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -769,10 +769,6 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f) /* Some controllers can't support RNDIS ... */ static inline bool can_support_rndis(struct usb_configuration *c) { - /* only two endpoints on sa1100 */ - if (gadget_is_sa1100(c->cdev->gadget)) - return false; - /* everything else is *presumably* fine */ return true; } diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 29dfb0277ffb..b49d86e3e45b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -1448,7 +1448,7 @@ static void invalidate_sub(struct fsg_lun *curlun) unsigned long rc; rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); - VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc); + VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); } static int do_verify(struct fsg_dev *fsg) @@ -3208,15 +3208,11 @@ static int __init check_parameters(struct fsg_dev *fsg) * halt bulk endpoints correctly. If one of them is present, * disable stalls. */ - if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) + if (gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; if (mod_data.release == 0xffff) { // Parameter wasn't set - /* The sa1100 controller is not supported */ - if (gadget_is_sa1100(fsg->gadget)) - gcnum = -1; - else - gcnum = usb_gadget_controller_number(fsg->gadget); + gcnum = usb_gadget_controller_number(fsg->gadget); if (gcnum >= 0) mod_data.release = 0x0300 + gcnum; else { diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c index 4bc2bf3d602e..20a802ecaa15 100644 --- a/drivers/usb/gadget/fsl_mx3_udc.c +++ b/drivers/usb/gadget/fsl_mx3_udc.c @@ -17,6 +17,8 @@ #include <linux/fsl_devices.h> #include <linux/platform_device.h> +#include <mach/hardware.h> + static struct clk *mxc_ahb_clk; static struct clk *mxc_usb_clk; @@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev) pdata = pdev->dev.platform_data; - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); - if (IS_ERR(mxc_ahb_clk)) - return PTR_ERR(mxc_ahb_clk); + if (!cpu_is_mx35()) { + mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); + if (IS_ERR(mxc_ahb_clk)) + return PTR_ERR(mxc_ahb_clk); - ret = clk_enable(mxc_ahb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); - goto eenahb; + ret = clk_enable(mxc_ahb_clk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); + goto eenahb; + } } /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ @@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); + ret = -EINVAL; goto eclkrate; } @@ -66,9 +71,11 @@ eclkrate: clk_put(mxc_usb_clk); mxc_usb_clk = NULL; egusb: - clk_disable(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_disable(mxc_ahb_clk); eenahb: - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_put(mxc_ahb_clk); return ret; } @@ -90,6 +97,8 @@ void fsl_udc_clk_release(void) clk_disable(mxc_usb_clk); clk_put(mxc_usb_clk); } - clk_disable(mxc_ahb_clk); - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) { + clk_disable(mxc_ahb_clk); + clk_put(mxc_ahb_clk); + } } diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 7881f12413c4..3537d51073b2 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2749,7 +2749,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) } /*-------------------------------------------------------------------------*/ -static struct of_device_id __devinitdata qe_udc_match[] = { +static const struct of_device_id qe_udc_match[] __devinitconst = { { .compatible = "fsl,mpc8323-qe-usb", .data = (void *)PORT_QE, diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f2d270b202f2..1edbc12fff18 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -45,46 +45,18 @@ #define gadget_is_goku(g) 0 #endif -/* SH3 UDC -- not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_SUPERH -#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name) -#else -#define gadget_is_sh(g) 0 -#endif - -/* not yet stable on 2.6 (would help "original Zaurus") */ -#ifdef CONFIG_USB_GADGET_SA1100 -#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name) -#else -#define gadget_is_sa1100(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_LH7A40X #define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name) #else #define gadget_is_lh7a40x(g) 0 #endif -/* handhelds.org tree (?) */ -#ifdef CONFIG_USB_GADGET_MQ11XX -#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name) -#else -#define gadget_is_mq11xx(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_OMAP #define gadget_is_omap(g) !strcmp("omap_udc", (g)->name) #else #define gadget_is_omap(g) 0 #endif -/* not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_N9604 -#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name) -#else -#define gadget_is_n9604(g) 0 -#endif - /* various unstable versions available */ #ifdef CONFIG_USB_GADGET_PXA27X #define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name) @@ -122,14 +94,6 @@ #define gadget_is_fsl_usb2(g) 0 #endif -/* Mentor high speed function controller */ -/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MUSBHSFC -#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name) -#else -#define gadget_is_musbhsfc(g) 0 -#endif - /* Mentor high speed "dual role" controller, in peripheral role */ #ifdef CONFIG_USB_GADGET_MUSB_HDRC #define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name) @@ -143,13 +107,6 @@ #define gadget_is_langwell(g) 0 #endif -/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MPC8272 -#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name) -#else -#define gadget_is_mpc8272(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_M66592 #define gadget_is_m66592(g) !strcmp("m66592_udc", (g)->name) #else @@ -203,20 +160,12 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x02; else if (gadget_is_pxa(gadget)) return 0x03; - else if (gadget_is_sh(gadget)) - return 0x04; - else if (gadget_is_sa1100(gadget)) - return 0x05; else if (gadget_is_goku(gadget)) return 0x06; - else if (gadget_is_mq11xx(gadget)) - return 0x07; else if (gadget_is_omap(gadget)) return 0x08; else if (gadget_is_lh7a40x(gadget)) return 0x09; - else if (gadget_is_n9604(gadget)) - return 0x10; else if (gadget_is_pxa27x(gadget)) return 0x11; else if (gadget_is_s3c2410(gadget)) @@ -225,12 +174,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x13; else if (gadget_is_imx(gadget)) return 0x14; - else if (gadget_is_musbhsfc(gadget)) - return 0x15; else if (gadget_is_musbhdrc(gadget)) return 0x16; - else if (gadget_is_mpc8272(gadget)) - return 0x17; else if (gadget_is_atmel_usba(gadget)) return 0x18; else if (gadget_is_fsl_usb2(gadget)) @@ -265,10 +210,6 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget) if (gadget_is_pxa27x(gadget)) return false; - /* SH3 hardware just doesn't do altsettings */ - if (gadget_is_sh(gadget)) - return false; - /* Everything else is *presumably* fine ... */ return true; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index d0b1e836f0e0..04f6224b7e06 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -237,7 +237,7 @@ static const struct usb_interface_descriptor ac_interface_desc = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct uac_ac_header_descriptor_1 ac_header_desc = { +static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, @@ -618,11 +618,6 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) } #endif - if (gadget_is_sa1100(gadget) && dev->config) { - /* tx fifo is full, but we can't clear it...*/ - ERROR(dev, "can't change configurations\n"); - return -ESPIPE; - } gmidi_reset_config(dev); switch (number) { diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 112bb40a427c..e8edc640381e 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1859,7 +1859,7 @@ done: /*-------------------------------------------------------------------------*/ -static struct pci_device_id pci_ids [] = { { +static const struct pci_device_id pci_ids[] = { { .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), .class_mask = ~0, .vendor = 0x102f, /* Toshiba */ diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index bf0f6520c6df..de8a83803505 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -194,7 +194,7 @@ enum ep_state { }; struct ep_data { - struct semaphore lock; + struct mutex lock; enum ep_state state; atomic_t count; struct dev_data *dev; @@ -298,10 +298,10 @@ get_ready_ep (unsigned f_flags, struct ep_data *epdata) int val; if (f_flags & O_NONBLOCK) { - if (down_trylock (&epdata->lock) != 0) + if (!mutex_trylock(&epdata->lock)) goto nonblock; if (epdata->state != STATE_EP_ENABLED) { - up (&epdata->lock); + mutex_unlock(&epdata->lock); nonblock: val = -EAGAIN; } else @@ -309,7 +309,8 @@ nonblock: return val; } - if ((val = down_interruptible (&epdata->lock)) < 0) + val = mutex_lock_interruptible(&epdata->lock); + if (val < 0) return val; switch (epdata->state) { @@ -323,7 +324,7 @@ nonblock: // FALLTHROUGH case STATE_EP_UNBOUND: /* clean disconnect */ val = -ENODEV; - up (&epdata->lock); + mutex_unlock(&epdata->lock); } return val; } @@ -393,7 +394,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) if (likely (data->ep != NULL)) usb_ep_set_halt (data->ep); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return -EBADMSG; } @@ -411,7 +412,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) value = -EFAULT; free1: - up (&data->lock); + mutex_unlock(&data->lock); kfree (kbuf); return value; } @@ -436,7 +437,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (likely (data->ep != NULL)) usb_ep_set_halt (data->ep); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return -EBADMSG; } @@ -455,7 +456,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) VDEBUG (data->dev, "%s write %zu IN, status %d\n", data->name, len, (int) value); free1: - up (&data->lock); + mutex_unlock(&data->lock); kfree (kbuf); return value; } @@ -466,7 +467,8 @@ ep_release (struct inode *inode, struct file *fd) struct ep_data *data = fd->private_data; int value; - if ((value = down_interruptible(&data->lock)) < 0) + value = mutex_lock_interruptible(&data->lock); + if (value < 0) return value; /* clean up if this can be reopened */ @@ -476,7 +478,7 @@ ep_release (struct inode *inode, struct file *fd) data->hs_desc.bDescriptorType = 0; usb_ep_disable(data->ep); } - up (&data->lock); + mutex_unlock(&data->lock); put_ep (data); return 0; } @@ -507,7 +509,7 @@ static long ep_ioctl(struct file *fd, unsigned code, unsigned long value) } else status = -ENODEV; spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return status; } @@ -673,7 +675,7 @@ fail: value = -ENODEV; spin_unlock_irq(&epdata->dev->lock); - up(&epdata->lock); + mutex_unlock(&epdata->lock); if (unlikely(value)) { kfree(priv); @@ -765,7 +767,8 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) u32 tag; int value, length = len; - if ((value = down_interruptible (&data->lock)) < 0) + value = mutex_lock_interruptible(&data->lock); + if (value < 0) return value; if (data->state != STATE_EP_READY) { @@ -854,7 +857,7 @@ fail: data->desc.bDescriptorType = 0; data->hs_desc.bDescriptorType = 0; } - up (&data->lock); + mutex_unlock(&data->lock); return value; fail0: value = -EINVAL; @@ -870,7 +873,7 @@ ep_open (struct inode *inode, struct file *fd) struct ep_data *data = inode->i_private; int value = -EBUSY; - if (down_interruptible (&data->lock) != 0) + if (mutex_lock_interruptible(&data->lock) != 0) return -EINTR; spin_lock_irq (&data->dev->lock); if (data->dev->state == STATE_DEV_UNBOUND) @@ -885,7 +888,7 @@ ep_open (struct inode *inode, struct file *fd) DBG (data->dev, "%s state %d\n", data->name, data->state); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return value; } @@ -1631,7 +1634,7 @@ static int activate_ep_files (struct dev_data *dev) if (!data) goto enomem0; data->state = STATE_EP_DISABLED; - init_MUTEX (&data->lock); + mutex_init(&data->lock); init_waitqueue_head (&data->wait); strncpy (data->name, ep->name, sizeof (data->name) - 1); diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 19619fbf20ac..705cc1f76327 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -135,6 +135,12 @@ FSG_MODULE_PARAMETERS(/* no prefix */, mod_data); static unsigned long msg_registered = 0; static void msg_cleanup(void); +static int msg_thread_exits(struct fsg_common *common) +{ + msg_cleanup(); + return 0; +} + static int __init msg_do_config(struct usb_configuration *c) { struct fsg_common *common; @@ -147,7 +153,7 @@ static int __init msg_do_config(struct usb_configuration *c) } fsg_config_from_params(&config, &mod_data); - config.thread_exits = (void(*)(struct fsg_common*))&msg_cleanup; + config.thread_exits = msg_thread_exits; common = fsg_common_init(0, c->cdev, &config); if (IS_ERR(common)) return PTR_ERR(common); diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c new file mode 100644 index 000000000000..7d6b66a85724 --- /dev/null +++ b/drivers/usb/gadget/nokia.c @@ -0,0 +1,259 @@ +/* + * nokia.c -- Nokia Composite Gadget Driver + * + * Copyright (C) 2008-2010 Nokia Corporation + * Contact: Felipe Balbi <felipe.balbi@nokia.com> + * + * This gadget driver borrows from serial.c which is: + * + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 by David Brownell + * Copyright (C) 2008 by Nokia Corporation + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * version 2 of that License. + */ + +#include <linux/kernel.h> +#include <linux/utsname.h> +#include <linux/device.h> + +#include "u_serial.h" +#include "u_ether.h" +#include "u_phonet.h" +#include "gadget_chips.h" + +/* Defines */ + +#define NOKIA_VERSION_NUM 0x0211 +#define NOKIA_LONG_NAME "N900 (PC-Suite Mode)" + +/*-------------------------------------------------------------------------*/ + +/* + * Kbuild is not very cooperative with respect to linking separately + * compiled library objects into one module. So for now we won't use + * separate compilation ... ensuring init/exit sections work to shrink + * the runtime footprint, and giving us at least some parts of what + * a "gcc --combine ... part1.c part2.c part3.c ... " build would. + */ +#include "composite.c" +#include "usbstring.c" +#include "config.c" +#include "epautoconf.c" + +#include "u_serial.c" +#include "f_acm.c" +#include "f_ecm.c" +#include "f_obex.c" +#include "f_serial.c" +#include "f_phonet.c" +#include "u_ether.c" + +/*-------------------------------------------------------------------------*/ + +#define NOKIA_VENDOR_ID 0x0421 /* Nokia */ +#define NOKIA_PRODUCT_ID 0x01c8 /* Nokia Gadget */ + +/* string IDs are assigned dynamically */ + +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 +#define STRING_DESCRIPTION_IDX 2 + +static char manufacturer_nokia[] = "Nokia"; +static const char product_nokia[] = NOKIA_LONG_NAME; +static const char description_nokia[] = "PC-Suite Configuration"; + +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = manufacturer_nokia, + [STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [STRING_DESCRIPTION_IDX].s = description_nokia, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + +static struct usb_device_descriptor device_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_COMM, + .idVendor = __constant_cpu_to_le16(NOKIA_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(NOKIA_PRODUCT_ID), + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ + .bNumConfigurations = 1, +}; + +/*-------------------------------------------------------------------------*/ + +/* Module */ +MODULE_DESCRIPTION("Nokia composite gadget driver for N900"); +MODULE_AUTHOR("Felipe Balbi"); +MODULE_LICENSE("GPL"); + +/*-------------------------------------------------------------------------*/ + +static u8 hostaddr[ETH_ALEN]; + +static int __init nokia_bind_config(struct usb_configuration *c) +{ + int status = 0; + + status = phonet_bind_config(c); + if (status) + printk(KERN_DEBUG "could not bind phonet config\n"); + + status = obex_bind_config(c, 0); + if (status) + printk(KERN_DEBUG "could not bind obex config %d\n", 0); + + status = obex_bind_config(c, 1); + if (status) + printk(KERN_DEBUG "could not bind obex config %d\n", 0); + + status = acm_bind_config(c, 2); + if (status) + printk(KERN_DEBUG "could not bind acm config\n"); + + status = ecm_bind_config(c, hostaddr); + if (status) + printk(KERN_DEBUG "could not bind ecm config\n"); + + return status; +} + +static struct usb_configuration nokia_config_500ma_driver = { + .label = "Bus Powered", + .bind = nokia_bind_config, + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = 250, /* 500mA */ +}; + +static struct usb_configuration nokia_config_100ma_driver = { + .label = "Self Powered", + .bind = nokia_bind_config, + .bConfigurationValue = 2, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 50, /* 100 mA */ +}; + +static int __init nokia_bind(struct usb_composite_dev *cdev) +{ + int gcnum; + struct usb_gadget *gadget = cdev->gadget; + int status; + + status = gphonet_setup(cdev->gadget); + if (status < 0) + goto err_phonet; + + status = gserial_setup(cdev->gadget, 3); + if (status < 0) + goto err_serial; + + status = gether_setup(cdev->gadget, hostaddr); + if (status < 0) + goto err_ether; + + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + + device_desc.iManufacturer = status; + + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_PRODUCT_IDX].id = status; + + device_desc.iProduct = status; + + /* config description */ + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_DESCRIPTION_IDX].id = status; + + nokia_config_500ma_driver.iConfiguration = status; + nokia_config_100ma_driver.iConfiguration = status; + + /* set up other descriptors */ + gcnum = usb_gadget_controller_number(gadget); + if (gcnum >= 0) + device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM); + else { + /* this should only work with hw that supports altsettings + * and several endpoints, anything else, panic. + */ + pr_err("nokia_bind: controller '%s' not recognized\n", + gadget->name); + goto err_usb; + } + + /* finaly register the configuration */ + status = usb_add_config(cdev, &nokia_config_500ma_driver); + if (status < 0) + goto err_usb; + + status = usb_add_config(cdev, &nokia_config_100ma_driver); + if (status < 0) + goto err_usb; + + dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME); + + return 0; + +err_usb: + gether_cleanup(); +err_ether: + gserial_cleanup(); +err_serial: + gphonet_cleanup(); +err_phonet: + return status; +} + +static int __exit nokia_unbind(struct usb_composite_dev *cdev) +{ + gphonet_cleanup(); + gserial_cleanup(); + gether_cleanup(); + + return 0; +} + +static struct usb_composite_driver nokia_driver = { + .name = "g_nokia", + .dev = &device_desc, + .strings = dev_strings, + .bind = nokia_bind, + .unbind = __exit_p(nokia_unbind), +}; + +static int __init nokia_init(void) +{ + return usb_composite_register(&nokia_driver); +} +module_init(nokia_init); + +static void __exit nokia_cleanup(void) +{ + usb_composite_unregister(&nokia_driver); +} +module_exit(nokia_cleanup); + diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 2d867fd22413..6b8bf8c781c4 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -949,12 +949,6 @@ printer_set_config(struct printer_dev *dev, unsigned number) int result = 0; struct usb_gadget *gadget = dev->gadget; - if (gadget_is_sa1100(gadget) && dev->config) { - /* tx fifo is full, but we can't clear it...*/ - INFO(dev, "can't change configurations\n"); - return -ESPIPE; - } - switch (number) { case DEV_CONFIG_VALUE: result = 0; @@ -1033,12 +1027,6 @@ set_interface(struct printer_dev *dev, unsigned number) { int result = 0; - if (gadget_is_sa1100(dev->gadget) && dev->interface < 0) { - /* tx fifo is full, but we can't clear it...*/ - INFO(dev, "can't change interfaces\n"); - return -ESPIPE; - } - /* Free the current interface */ switch (dev->interface) { case PRINTER_INTERFACE: @@ -1392,12 +1380,6 @@ printer_bind(struct usb_gadget *gadget) goto fail; } - if (gadget_is_sa1100(gadget)) { - /* hardware can't write zero length packets. */ - ERROR(dev, "SA1100 controller is unsupport by this driver\n"); - goto fail; - } - gcnum = usb_gadget_controller_number(gadget); if (gcnum >= 0) { device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e6fedbd5a654..be5fb34d9602 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -65,6 +65,10 @@ #include <mach/pxa25x-udc.h> #endif +#ifdef CONFIG_ARCH_LUBBOCK +#include <mach/lubbock.h> +#endif + #include <asm/mach/udc_pxa2xx.h> diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index adda1208a1ec..05b892c3d686 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -742,13 +742,17 @@ static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req) * @ep: pxa physical endpoint * @req: pxa request * @status: usb request status sent to gadget API + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held if flags not NULL, else ep->lock released * * Retire a pxa27x usb request. Endpoint must be locked. */ -static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) +static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status, + unsigned long *pflags) { + unsigned long flags; + ep_del_request(ep, req); if (likely(req->req.status == -EINPROGRESS)) req->req.status = status; @@ -760,38 +764,48 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) &req->req, status, req->req.actual, req->req.length); + if (pflags) + spin_unlock_irqrestore(&ep->lock, *pflags); + local_irq_save(flags); req->req.complete(&req->udc_usb_ep->usb_ep, &req->req); + local_irq_restore(flags); + if (pflags) + spin_lock_irqsave(&ep->lock, *pflags); } /** * ep_end_out_req - Ends endpoint OUT request * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends endpoint OUT request (completes usb request). */ -static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { inc_ep_stats_reqs(ep, !USB_DIR_IN); - req_done(ep, req, 0); + req_done(ep, req, 0, pflags); } /** * ep0_end_out_req - Ends control endpoint OUT request (ends data stage) * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends control endpoint OUT request (completes usb request), and puts * control endpoint into idle state */ -static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { set_ep0state(ep->dev, OUT_STATUS_STAGE); - ep_end_out_req(ep, req); + ep_end_out_req(ep, req, pflags); ep0_idle(ep->dev); } @@ -799,31 +813,35 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) * ep_end_in_req - Ends endpoint IN request * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends endpoint IN request (completes usb request). */ -static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { inc_ep_stats_reqs(ep, USB_DIR_IN); - req_done(ep, req, 0); + req_done(ep, req, 0, pflags); } /** * ep0_end_in_req - Ends control endpoint IN request (ends data stage) * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends control endpoint IN request (completes usb request), and puts * control endpoint into status state */ -static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { set_ep0state(ep->dev, IN_STATUS_STAGE); - ep_end_in_req(ep, req); + ep_end_in_req(ep, req, pflags); } /** @@ -831,19 +849,22 @@ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) * @ep: pxa endpoint * @status: usb request status * - * Context: ep->lock held + * Context: ep->lock released * * Dequeues all requests on an endpoint. As a side effect, interrupts will be * disabled on that endpoint (because no more requests). */ static void nuke(struct pxa_ep *ep, int status) { - struct pxa27x_request *req; + struct pxa27x_request *req; + unsigned long flags; + spin_lock_irqsave(&ep->lock, flags); while (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct pxa27x_request, queue); - req_done(ep, req, status); + req_done(ep, req, status, &flags); } + spin_unlock_irqrestore(&ep->lock, flags); } /** @@ -1123,6 +1144,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int rc = 0; int is_first_req; unsigned length; + int recursion_detected; req = container_of(_req, struct pxa27x_request, req); udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); @@ -1152,6 +1174,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, return -EMSGSIZE; spin_lock_irqsave(&ep->lock, flags); + recursion_detected = ep->in_handle_ep; is_first_req = list_empty(&ep->queue); ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n", @@ -1161,12 +1184,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, if (!ep->enabled) { _req->status = -ESHUTDOWN; rc = -ESHUTDOWN; - goto out; + goto out_locked; } if (req->in_use) { ep_err(ep, "refusing to queue req %p (already queued)\n", req); - goto out; + goto out_locked; } length = _req->length; @@ -1174,12 +1197,13 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, _req->actual = 0; ep_add_request(ep, req); + spin_unlock_irqrestore(&ep->lock, flags); if (is_ep0(ep)) { switch (dev->ep0state) { case WAIT_ACK_SET_CONF_INTERF: if (length == 0) { - ep_end_in_req(ep, req); + ep_end_in_req(ep, req, NULL); } else { ep_err(ep, "got a request of %d bytes while" "in state WAIT_ACK_SET_CONF_INTERF\n", @@ -1192,12 +1216,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, case IN_DATA_STAGE: if (!ep_is_full(ep)) if (write_ep0_fifo(ep, req)) - ep0_end_in_req(ep, req); + ep0_end_in_req(ep, req, NULL); break; case OUT_DATA_STAGE: if ((length == 0) || !epout_has_pkt(ep)) if (read_ep0_fifo(ep, req)) - ep0_end_out_req(ep, req); + ep0_end_out_req(ep, req, NULL); break; default: ep_err(ep, "odd state %s to send me a request\n", @@ -1207,12 +1231,15 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, break; } } else { - handle_ep(ep); + if (!recursion_detected) + handle_ep(ep); } out: - spin_unlock_irqrestore(&ep->lock, flags); return rc; +out_locked: + spin_unlock_irqrestore(&ep->lock, flags); + goto out; } /** @@ -1242,13 +1269,14 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* make sure it's actually queued on this endpoint */ list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) { - req_done(ep, req, -ECONNRESET); rc = 0; break; } } spin_unlock_irqrestore(&ep->lock, flags); + if (!rc) + req_done(ep, req, -ECONNRESET, NULL); return rc; } @@ -1445,7 +1473,6 @@ static int pxa_ep_disable(struct usb_ep *_ep) { struct pxa_ep *ep; struct udc_usb_ep *udc_usb_ep; - unsigned long flags; if (!_ep) return -EINVAL; @@ -1455,10 +1482,8 @@ static int pxa_ep_disable(struct usb_ep *_ep) if (!ep || is_ep0(ep) || !list_empty(&ep->queue)) return -EINVAL; - spin_lock_irqsave(&ep->lock, flags); ep->enabled = 0; nuke(ep, -ESHUTDOWN); - spin_unlock_irqrestore(&ep->lock, flags); pxa_ep_fifo_flush(_ep); udc_usb_ep->pxa_ep = NULL; @@ -1907,8 +1932,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc, } u; int i; int have_extrabytes = 0; + unsigned long flags; nuke(ep, -EPROTO); + spin_lock_irqsave(&ep->lock, flags); /* * In the PXA320 manual, in the section about Back-to-Back setup @@ -1947,10 +1974,13 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc, /* Tell UDC to enter Data Stage */ ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC); + spin_unlock_irqrestore(&ep->lock, flags); i = udc->driver->setup(&udc->gadget, &u.r); + spin_lock_irqsave(&ep->lock, flags); if (i < 0) goto stall; out: + spin_unlock_irqrestore(&ep->lock, flags); return; stall: ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n", @@ -2055,13 +2085,13 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) if (req && !ep_is_full(ep)) completed = write_ep0_fifo(ep, req); if (completed) - ep0_end_in_req(ep, req); + ep0_end_in_req(ep, req, NULL); break; case OUT_DATA_STAGE: /* SET_DESCRIPTOR */ if (epout_has_pkt(ep) && req) completed = read_ep0_fifo(ep, req); if (completed) - ep0_end_out_req(ep, req); + ep0_end_out_req(ep, req, NULL); break; case STALL: ep_write_UDCCSR(ep, UDCCSR0_FST); @@ -2091,7 +2121,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) * Tries to transfer all pending request data into the endpoint and/or * transfer all pending data in the endpoint into usb requests. * - * Is always called when in_interrupt() or with ep->lock held. + * Is always called when in_interrupt() and with ep->lock released. */ static void handle_ep(struct pxa_ep *ep) { @@ -2100,10 +2130,17 @@ static void handle_ep(struct pxa_ep *ep) u32 udccsr; int is_in = ep->dir_in; int loop = 0; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + if (ep->in_handle_ep) + goto recursion_detected; + ep->in_handle_ep = 1; do { completed = 0; udccsr = udc_ep_readl(ep, UDCCSR); + if (likely(!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct pxa27x_request, queue); @@ -2122,15 +2159,22 @@ static void handle_ep(struct pxa_ep *ep) if (unlikely(is_in)) { if (likely(!ep_is_full(ep))) completed = write_fifo(ep, req); - if (completed) - ep_end_in_req(ep, req); } else { if (likely(epout_has_pkt(ep))) completed = read_fifo(ep, req); - if (completed) - ep_end_out_req(ep, req); + } + + if (completed) { + if (is_in) + ep_end_in_req(ep, req, &flags); + else + ep_end_out_req(ep, req, &flags); } } while (completed); + + ep->in_handle_ep = 0; +recursion_detected: + spin_unlock_irqrestore(&ep->lock, flags); } /** @@ -2218,9 +2262,13 @@ static void irq_handle_data(int irq, struct pxa_udc *udc) continue; udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK)); - ep = &udc->pxa_ep[i]; - ep->stats.irqs++; - handle_ep(ep); + + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } } for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) { @@ -2228,9 +2276,12 @@ static void irq_handle_data(int irq, struct pxa_udc *udc) if (!(udcisr1 & UDCISR_INT_MASK)) continue; - ep = &udc->pxa_ep[i]; - ep->stats.irqs++; - handle_ep(ep); + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } } } @@ -2439,7 +2490,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) } retval = -ENOMEM; - udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + udc->regs = ioremap(regs->start, resource_size(regs)); if (!udc->regs) { dev_err(&pdev->dev, "Unable to map UDC I/O memory\n"); goto err_map; diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index e25225e26586..ff61e4866e8a 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -318,6 +318,11 @@ struct udc_usb_ep { * @queue: requests queue * @lock: lock to pxa_ep data (queues and stats) * @enabled: true when endpoint enabled (not stopped by gadget layer) + * @in_handle_ep: number of recursions of handle_ep() function + * Prevents deadlocks or infinite recursions of types : + * irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep() + * or + * pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue() * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX) * @name: endpoint name (for trace/debug purpose) * @dir_in: 1 if IN endpoint, 0 if OUT endpoint @@ -346,6 +351,7 @@ struct pxa_ep { spinlock_t lock; /* Protects this structure */ /* (queues, stats) */ unsigned enabled:1; + unsigned in_handle_ep:1; unsigned idx:5; char *name; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 5fc80a104150..f742c8e7397c 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -30,7 +30,7 @@ #include <plat/regs-usb-hsotg-phy.h> #include <plat/regs-usb-hsotg.h> -#include <plat/regs-sys.h> +#include <mach/regs-sys.h> #include <plat/udc-hs.h> #define DMA_ADDR_INVALID (~((dma_addr_t)0)) @@ -317,7 +317,8 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) * * Allocate a new USB request structure appropriate for the specified endpoint */ -struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags) +static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, + gfp_t flags) { struct s3c_hsotg_req *req; @@ -373,7 +374,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, req->dma = DMA_ADDR_INVALID; hs_req->mapped = 0; } else { - dma_sync_single(hsotg->dev, req->dma, req->length, dir); + dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); } } @@ -755,7 +756,7 @@ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, hs_req->mapped = 1; req->dma = dma; } else { - dma_sync_single(hsotg->dev, req->dma, req->length, dir); + dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); hs_req->mapped = 0; } @@ -1460,7 +1461,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) * as the actual data should be sent to the memory directly and we turn * on the completion interrupts to get notifications of transfer completion. */ -void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) +static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) { u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP); u32 epnum, status, size; @@ -3094,7 +3095,7 @@ static void s3c_hsotg_gate(struct platform_device *pdev, bool on) local_irq_restore(flags); } -struct s3c_hsotg_plat s3c_hsotg_default_pdata; +static struct s3c_hsotg_plat s3c_hsotg_default_pdata; static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 2fc02bd95848..84ca195c2d10 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -746,6 +746,10 @@ static const struct net_device_ops eth_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; +static struct device_type gadget_type = { + .name = "gadget", +}; + /** * gether_setup - initialize one ethernet-over-usb link * @g: gadget to associated with these links @@ -808,6 +812,7 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); + SET_NETDEV_DEVTYPE(net, &gadget_type); status = register_netdev(net); if (status < 0) { diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index fd55f450bc0e..3c8c0c9f9d72 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -93,13 +93,6 @@ static inline bool can_support_ecm(struct usb_gadget *gadget) if (!gadget_supports_altsettings(gadget)) return false; - /* SA1100 can do ECM, *without* status endpoint ... but we'll - * only use it in non-ECM mode for backwards compatibility - * (and since we currently require a status endpoint) - */ - if (gadget_is_sa1100(gadget)) - return false; - /* Everything else is *presumably* fine ... but this is a bit * chancy, so be **CERTAIN** there are no hardware issues with * your controller. Add it above if it can't handle CDC. diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 2d772401b7ad..fac81ee193dd 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -297,12 +297,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev) */ if (loopdefault) { loopback_add(cdev, autoresume != 0); - if (!gadget_is_sh(gadget)) - sourcesink_add(cdev, autoresume != 0); + sourcesink_add(cdev, autoresume != 0); } else { sourcesink_add(cdev, autoresume != 0); - if (!gadget_is_sh(gadget)) - loopback_add(cdev, autoresume != 0); + loopback_add(cdev, autoresume != 0); } gcnum = usb_gadget_controller_number(gadget); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2678a1624fcc..8d3df0397de3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -399,3 +399,14 @@ config USB_HWA_HCD To compile this driver a module, choose M here: the module will be called "hwa-hc". + +config USB_IMX21_HCD + tristate "iMX21 HCD support" + depends on USB && ARM && MACH_MX21 + help + This driver enables support for the on-chip USB host in the + iMX21 processor. + + To compile this driver as a module, choose M here: the + module will be called "imx21-hcd". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index f58b2494c44a..4e0c67f1f51b 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -32,3 +32,5 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o +obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 87c1b7c34c0e..51bd0edf544f 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -149,7 +149,7 @@ static int __init ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_request_resource; } hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; + hcd->rsrc_len = resource_size(res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, driver->description)) { diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index dbfb482a94e3..e3a74e75e822 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -121,6 +121,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct ehci_hcd *ehci; + struct resource *res; int ret; if (usb_disabled()) @@ -144,8 +145,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 991174937db3..0e26aa13f158 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,5 +1,6 @@ /* - * Copyright (c) 2005 MontaVista Software + * Copyright 2005-2009 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,17 +18,20 @@ * * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided * by Hunter Wu. + * Power Management support by Dave Liu <daveliu@freescale.com>, + * Jerry Huang <Chang-Ming.Huang@freescale.com> and + * Anton Vorontsov <avorontsov@ru.mvista.com>. */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/pm.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> #include "ehci-fsl.h" -/* FIXME: Power Management is un-ported so temporarily disable it */ -#undef CONFIG_PM - - /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -40,8 +44,8 @@ * Allocates basic resources for this USB host controller. * */ -int usb_hcd_fsl_probe(const struct hc_driver *driver, - struct platform_device *pdev) +static int usb_hcd_fsl_probe(const struct hc_driver *driver, + struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata; struct usb_hcd *hcd; @@ -147,7 +151,8 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver, * Reverses the effect of usb_hcd_fsl_probe(). * */ -void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev) +static void usb_hcd_fsl_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -284,10 +289,81 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) return retval; } +struct ehci_fsl { + struct ehci_hcd ehci; + +#ifdef CONFIG_PM + /* Saved USB PHY settings, need to restore after deep sleep. */ + u32 usb_ctrl; +#endif +}; + +#ifdef CONFIG_PM + +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + return container_of(ehci, struct ehci_fsl, ehci); +} + +static int ehci_fsl_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + void __iomem *non_ehci = hcd->regs; + + if (!fsl_deep_sleep()) + return 0; + + ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); + return 0; +} + +static int ehci_fsl_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + + if (!fsl_deep_sleep()) + return 0; + + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Restore USB PHY settings and enable the controller. */ + out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); + + ehci_reset(ehci); + ehci_fsl_reinit(ehci); + + return 0; +} + +static int ehci_fsl_drv_restore(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_root_hub_lost_power(hcd->self.root_hub); + return 0; +} + +static struct dev_pm_ops ehci_fsl_pm_ops = { + .suspend = ehci_fsl_drv_suspend, + .resume = ehci_fsl_drv_resume, + .restore = ehci_fsl_drv_restore, +}; + +#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) +#else +#define EHCI_FSL_PM_OPS NULL +#endif /* CONFIG_PM */ + static const struct hc_driver ehci_fsl_hc_driver = { .description = hcd_name, .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), + .hcd_priv_size = sizeof(struct ehci_fsl), /* * generic hardware linkage @@ -354,6 +430,7 @@ static struct platform_driver ehci_fsl_driver = { .remove = ehci_fsl_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { - .name = "fsl-ehci", + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, }, }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1ec3857f22e6..d8d6d3461d32 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1118,7 +1118,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 #include "ehci-omap.c" #define PLATFORM_DRIVER ehci_hcd_omap_driver #endif diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 35c56f40bdbb..23cd917088b4 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -162,6 +162,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_ioremap; } + /* call platform specific init function */ + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) { + dev_err(dev, "platform init failed\n"); + goto err_init; + } + /* platforms need some time to settle changed IO settings */ + mdelay(10); + } + /* enable clocks */ priv->usbclk = clk_get(dev, "usb"); if (IS_ERR(priv->usbclk)) { @@ -192,18 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (ret < 0) goto err_init; - /* call platform specific init function */ - if (pdata->init) { - ret = pdata->init(pdev); - if (ret) { - dev_err(dev, "platform init failed\n"); - goto err_init; - } - } - - /* most platforms need some time to settle changed IO settings */ - mdelay(10); - /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 74d07f4e8b7d..f0282d6bb7aa 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -26,10 +26,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Feb 23rd, 2009): + * TODO (last updated Feb 12, 2010): * - add kernel-doc * - enable AUTOIDLE - * - move DPLL5 programming to clock fw * - add suspend/resume * - move workarounds to board-files */ @@ -37,6 +36,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/regulator/consumer.h> #include <plat/usb.h> /* @@ -178,6 +178,11 @@ struct ehci_hcd_omap { void __iomem *uhh_base; void __iomem *tll_base; void __iomem *ehci_base; + + /* Regulators for USB PHYs. + * Each PHY can have a seperate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; /*-------------------------------------------------------------------------*/ @@ -546,6 +551,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) int irq = platform_get_irq(pdev, 0); int ret = -ENODEV; + int i; + char supply[7]; if (!pdata) { dev_dbg(&pdev->dev, "missing platform_data\n"); @@ -613,6 +620,21 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_tll_ioremap; } + /* get ehci regulator and enable */ + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) { + omap->regulator[i] = NULL; + continue; + } + snprintf(supply, sizeof(supply), "hsusb%d", i); + omap->regulator[i] = regulator_get(omap->dev, supply); + if (IS_ERR(omap->regulator[i])) + dev_dbg(&pdev->dev, + "failed to get ehci port%d regulator\n", i); + else + regulator_enable(omap->regulator[i]); + } + ret = omap_start_ehc(omap, hcd); if (ret) { dev_dbg(&pdev->dev, "failed to start ehci\n"); @@ -622,13 +644,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap->ehci->regs = hcd->regs + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); + dbg_hcs_params(omap->ehci, "reset"); + dbg_hcc_params(omap->ehci, "reset"); + /* cache this readonly data; minimize chip reads */ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); - /* SET 1 micro-frame Interrupt interval */ - writel(readl(&omap->ehci->regs->command) | (1 << 16), - &omap->ehci->regs->command); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); @@ -641,6 +662,12 @@ err_add_hcd: omap_stop_ehc(omap, hcd); err_start: + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->regulator[i]) { + regulator_disable(omap->regulator[i]); + regulator_put(omap->regulator[i]); + } + } iounmap(omap->tll_base); err_tll_ioremap: @@ -674,13 +701,21 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) { struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); + int i; usb_remove_hcd(hcd); omap_stop_ehc(omap, hcd); iounmap(hcd->regs); + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->regulator[i]) { + regulator_disable(omap->regulator[i]); + regulator_put(omap->regulator[i]); + } + } iounmap(omap->tll_base); iounmap(omap->uhh_base); usb_put_hcd(hcd); + kfree(omap); return 0; } diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 1d283e1b2b8d..0f87dc72820a 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -222,14 +222,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err1; } - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { dev_dbg(&pdev->dev, "controller already in use\n"); err = -EBUSY; goto err1; } - regs = ioremap(res->start, res->end - res->start + 1); + regs = ioremap(res->start, resource_size(res)); if (regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); err = -EFAULT; @@ -244,7 +244,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; + hcd->rsrc_len = resource_size(res); hcd->regs = regs; ehci = hcd_to_ehci(hcd); @@ -287,7 +287,7 @@ err4: err3: iounmap(regs); err2: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); err1: dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), err); diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 36f96da129f5..8df33b8a634c 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -134,21 +134,21 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -161,9 +161,9 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) ehci->ohci_hcctrl_reg = ioremap(res.start + OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); else - pr_debug(__FILE__ ": no ohci offset in fdt\n"); + pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { - pr_debug(__FILE__ ": ioremap for ohci hcctrl failed\n"); + pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); } else { ehci->has_amcc_usb23 = 1; } @@ -241,7 +241,7 @@ static int ehci_hcd_ppc_of_remove(struct of_device *op) else release_mem_region(res.start, 0x4); else - pr_debug(__FILE__ ": no ohci offset in fdt\n"); + pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } @@ -264,7 +264,7 @@ static int ehci_hcd_ppc_of_shutdown(struct of_device *op) } -static struct of_device_id ehci_hcd_ppc_of_match[] = { +static const struct of_device_id ehci_hcd_ppc_of_match[] = { { .compatible = "usb-ehci", }, diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 1e391e624c8a..39340ae00ac4 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -510,6 +510,8 @@ static int disable_periodic (struct ehci_hcd *ehci) ehci_writel(ehci, cmd, &ehci->regs->command); /* posted write ... */ + free_cached_itd_list(ehci); + ehci->next_uframe = -1; return 0; } @@ -2322,9 +2324,13 @@ restart: * No need to check for activity unless the * frame is current. */ - if (frame == clock_frame && live && - (q.sitd->hw_results & - SITD_ACTIVE(ehci))) { + if (((frame == clock_frame) || + (((frame + 1) % ehci->periodic_size) + == clock_frame)) + && live + && (q.sitd->hw_results & + SITD_ACTIVE(ehci))) { + incomplete = true; q_p = &q.sitd->sitd_next; hw_p = &q.sitd->hw_next; diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index a5861531ad3e..f603bb2c0a8e 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -177,21 +177,21 @@ ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -281,7 +281,7 @@ static int ehci_hcd_xilinx_of_shutdown(struct of_device *op) } -static struct of_device_id ehci_hcd_xilinx_of_match[] = { +static const struct of_device_id ehci_hcd_xilinx_of_match[] = { {.compatible = "xlnx,xps-usb-host-1.00.a",}, {}, }; diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 78e7c3cfcb72..5dcfb3de9945 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -433,7 +433,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return -ENOMEM; /* allocate the private part of the URB */ - urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags); if (!urb_priv->tds) { kfree(urb_priv); return -ENOMEM; @@ -805,7 +805,7 @@ static int __devexit of_fhci_remove(struct of_device *ofdev) return fhci_remove(&ofdev->dev); } -static struct of_device_id of_fhci_match[] = { +static const struct of_device_id of_fhci_match[] = { { .compatible = "fsl,mpc8323-qe-usb", }, {}, }; diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c new file mode 100644 index 000000000000..512f647448ca --- /dev/null +++ b/drivers/usb/host/imx21-dbg.c @@ -0,0 +1,527 @@ +/* + * Copyright (c) 2009 by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* this file is part of imx21-hcd.c */ + +#ifndef DEBUG + +static inline void create_debug_files(struct imx21 *imx21) { } +static inline void remove_debug_files(struct imx21 *imx21) { } +static inline void debug_urb_submitted(struct imx21 *imx21, struct urb *urb) {} +static inline void debug_urb_completed(struct imx21 *imx21, struct urb *urb, + int status) {} +static inline void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb) {} +static inline void debug_urb_queued_for_etd(struct imx21 *imx21, + struct urb *urb) {} +static inline void debug_urb_queued_for_dmem(struct imx21 *imx21, + struct urb *urb) {} +static inline void debug_etd_allocated(struct imx21 *imx21) {} +static inline void debug_etd_freed(struct imx21 *imx21) {} +static inline void debug_dmem_allocated(struct imx21 *imx21, int size) {} +static inline void debug_dmem_freed(struct imx21 *imx21, int size) {} +static inline void debug_isoc_submitted(struct imx21 *imx21, + int frame, struct td *td) {} +static inline void debug_isoc_completed(struct imx21 *imx21, + int frame, struct td *td, int cc, int len) {} + +#else + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static const char *dir_labels[] = { + "TD 0", + "OUT", + "IN", + "TD 1" +}; + +static const char *speed_labels[] = { + "Full", + "Low" +}; + +static const char *format_labels[] = { + "Control", + "ISO", + "Bulk", + "Interrupt" +}; + +static inline struct debug_stats *stats_for_urb(struct imx21 *imx21, + struct urb *urb) +{ + return usb_pipeisoc(urb->pipe) ? + &imx21->isoc_stats : &imx21->nonisoc_stats; +} + +static void debug_urb_submitted(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->submitted++; +} + +static void debug_urb_completed(struct imx21 *imx21, struct urb *urb, int st) +{ + if (st) + stats_for_urb(imx21, urb)->completed_failed++; + else + stats_for_urb(imx21, urb)->completed_ok++; +} + +static void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->unlinked++; +} + +static void debug_urb_queued_for_etd(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->queue_etd++; +} + +static void debug_urb_queued_for_dmem(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->queue_dmem++; +} + +static inline void debug_etd_allocated(struct imx21 *imx21) +{ + imx21->etd_usage.maximum = max( + ++(imx21->etd_usage.value), + imx21->etd_usage.maximum); +} + +static inline void debug_etd_freed(struct imx21 *imx21) +{ + imx21->etd_usage.value--; +} + +static inline void debug_dmem_allocated(struct imx21 *imx21, int size) +{ + imx21->dmem_usage.value += size; + imx21->dmem_usage.maximum = max( + imx21->dmem_usage.value, + imx21->dmem_usage.maximum); +} + +static inline void debug_dmem_freed(struct imx21 *imx21, int size) +{ + imx21->dmem_usage.value -= size; +} + + +static void debug_isoc_submitted(struct imx21 *imx21, + int frame, struct td *td) +{ + struct debug_isoc_trace *trace = &imx21->isoc_trace[ + imx21->isoc_trace_index++]; + + imx21->isoc_trace_index %= ARRAY_SIZE(imx21->isoc_trace); + trace->schedule_frame = td->frame; + trace->submit_frame = frame; + trace->request_len = td->len; + trace->td = td; +} + +static inline void debug_isoc_completed(struct imx21 *imx21, + int frame, struct td *td, int cc, int len) +{ + struct debug_isoc_trace *trace, *trace_failed; + int i; + int found = 0; + + trace = imx21->isoc_trace; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++) { + if (trace->td == td) { + trace->done_frame = frame; + trace->done_len = len; + trace->cc = cc; + trace->td = NULL; + found = 1; + break; + } + } + + if (found && cc) { + trace_failed = &imx21->isoc_trace_failed[ + imx21->isoc_trace_index_failed++]; + + imx21->isoc_trace_index_failed %= ARRAY_SIZE( + imx21->isoc_trace_failed); + *trace_failed = *trace; + } +} + + +static char *format_ep(struct usb_host_endpoint *ep, char *buf, int bufsize) +{ + if (ep) + snprintf(buf, bufsize, "ep_%02x (type:%02X kaddr:%p)", + ep->desc.bEndpointAddress, + usb_endpoint_type(&ep->desc), + ep); + else + snprintf(buf, bufsize, "none"); + return buf; +} + +static char *format_etd_dword0(u32 value, char *buf, int bufsize) +{ + snprintf(buf, bufsize, + "addr=%d ep=%d dir=%s speed=%s format=%s halted=%d", + value & 0x7F, + (value >> DW0_ENDPNT) & 0x0F, + dir_labels[(value >> DW0_DIRECT) & 0x03], + speed_labels[(value >> DW0_SPEED) & 0x01], + format_labels[(value >> DW0_FORMAT) & 0x03], + (value >> DW0_HALTED) & 0x01); + return buf; +} + +static int debug_status_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + int etds_allocated = 0; + int etds_sw_busy = 0; + int etds_hw_busy = 0; + int dmem_blocks = 0; + int queued_for_etd = 0; + int queued_for_dmem = 0; + unsigned int dmem_bytes = 0; + int i; + struct etd_priv *etd; + u32 etd_enable_mask; + unsigned long flags; + struct imx21_dmem_area *dmem; + struct ep_priv *ep_priv; + + spin_lock_irqsave(&imx21->lock, flags); + + etd_enable_mask = readl(imx21->regs + USBH_ETDENSET); + for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) { + if (etd->alloc) + etds_allocated++; + if (etd->urb) + etds_sw_busy++; + if (etd_enable_mask & (1<<i)) + etds_hw_busy++; + } + + list_for_each_entry(dmem, &imx21->dmem_list, list) { + dmem_bytes += dmem->size; + dmem_blocks++; + } + + list_for_each_entry(ep_priv, &imx21->queue_for_etd, queue) + queued_for_etd++; + + list_for_each_entry(etd, &imx21->queue_for_dmem, queue) + queued_for_dmem++; + + spin_unlock_irqrestore(&imx21->lock, flags); + + seq_printf(s, + "Frame: %d\n" + "ETDs allocated: %d/%d (max=%d)\n" + "ETDs in use sw: %d\n" + "ETDs in use hw: %d\n" + "DMEM alocated: %d/%d (max=%d)\n" + "DMEM blocks: %d\n" + "Queued waiting for ETD: %d\n" + "Queued waiting for DMEM: %d\n", + readl(imx21->regs + USBH_FRMNUB) & 0xFFFF, + etds_allocated, USB_NUM_ETD, imx21->etd_usage.maximum, + etds_sw_busy, + etds_hw_busy, + dmem_bytes, DMEM_SIZE, imx21->dmem_usage.maximum, + dmem_blocks, + queued_for_etd, + queued_for_dmem); + + return 0; +} + +static int debug_dmem_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct imx21_dmem_area *dmem; + unsigned long flags; + char ep_text[40]; + + spin_lock_irqsave(&imx21->lock, flags); + + list_for_each_entry(dmem, &imx21->dmem_list, list) + seq_printf(s, + "%04X: size=0x%X " + "ep=%s\n", + dmem->offset, dmem->size, + format_ep(dmem->ep, ep_text, sizeof(ep_text))); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static int debug_etd_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct etd_priv *etd; + char buf[60]; + u32 dword; + int i, j; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) { + int state = -1; + struct urb_priv *urb_priv; + if (etd->urb) { + urb_priv = etd->urb->hcpriv; + if (urb_priv) + state = urb_priv->state; + } + + seq_printf(s, + "etd_num: %d\n" + "ep: %s\n" + "alloc: %d\n" + "len: %d\n" + "busy sw: %d\n" + "busy hw: %d\n" + "urb state: %d\n" + "current urb: %p\n", + + i, + format_ep(etd->ep, buf, sizeof(buf)), + etd->alloc, + etd->len, + etd->urb != NULL, + (readl(imx21->regs + USBH_ETDENSET) & (1 << i)) > 0, + state, + etd->urb); + + for (j = 0; j < 4; j++) { + dword = etd_readl(imx21, i, j); + switch (j) { + case 0: + format_etd_dword0(dword, buf, sizeof(buf)); + break; + case 2: + snprintf(buf, sizeof(buf), + "cc=0X%02X", dword >> DW2_COMPCODE); + break; + default: + *buf = 0; + break; + } + seq_printf(s, + "dword %d: submitted=%08X cur=%08X [%s]\n", + j, + etd->submitted_dwords[j], + dword, + buf); + } + seq_printf(s, "\n"); + } + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void debug_statistics_show_one(struct seq_file *s, + const char *name, struct debug_stats *stats) +{ + seq_printf(s, "%s:\n" + "submitted URBs: %lu\n" + "completed OK: %lu\n" + "completed failed: %lu\n" + "unlinked: %lu\n" + "queued for ETD: %lu\n" + "queued for DMEM: %lu\n\n", + name, + stats->submitted, + stats->completed_ok, + stats->completed_failed, + stats->unlinked, + stats->queue_etd, + stats->queue_dmem); +} + +static int debug_statistics_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + debug_statistics_show_one(s, "nonisoc", &imx21->nonisoc_stats); + debug_statistics_show_one(s, "isoc", &imx21->isoc_stats); + seq_printf(s, "unblock kludge triggers: %lu\n", imx21->debug_unblocks); + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void debug_isoc_show_one(struct seq_file *s, + const char *name, int index, struct debug_isoc_trace *trace) +{ + seq_printf(s, "%s %d:\n" + "cc=0X%02X\n" + "scheduled frame %d (%d)\n" + "submittted frame %d (%d)\n" + "completed frame %d (%d)\n" + "requested length=%d\n" + "completed length=%d\n\n", + name, index, + trace->cc, + trace->schedule_frame, trace->schedule_frame & 0xFFFF, + trace->submit_frame, trace->submit_frame & 0xFFFF, + trace->done_frame, trace->done_frame & 0xFFFF, + trace->request_len, + trace->done_len); +} + +static int debug_isoc_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct debug_isoc_trace *trace; + unsigned long flags; + int i; + + spin_lock_irqsave(&imx21->lock, flags); + + trace = imx21->isoc_trace_failed; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace_failed); i++, trace++) + debug_isoc_show_one(s, "isoc failed", i, trace); + + trace = imx21->isoc_trace; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++) + debug_isoc_show_one(s, "isoc", i, trace); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static int debug_status_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_status_show, inode->i_private); +} + +static int debug_dmem_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_dmem_show, inode->i_private); +} + +static int debug_etd_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_etd_show, inode->i_private); +} + +static int debug_statistics_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_statistics_show, inode->i_private); +} + +static int debug_isoc_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_isoc_show, inode->i_private); +} + +static const struct file_operations debug_status_fops = { + .open = debug_status_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_dmem_fops = { + .open = debug_dmem_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_etd_fops = { + .open = debug_etd_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_statistics_fops = { + .open = debug_statistics_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_isoc_fops = { + .open = debug_isoc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void create_debug_files(struct imx21 *imx21) +{ + imx21->debug_root = debugfs_create_dir(dev_name(imx21->dev), NULL); + if (!imx21->debug_root) + goto failed_create_rootdir; + + if (!debugfs_create_file("status", S_IRUGO, + imx21->debug_root, imx21, &debug_status_fops)) + goto failed_create; + + if (!debugfs_create_file("dmem", S_IRUGO, + imx21->debug_root, imx21, &debug_dmem_fops)) + goto failed_create; + + if (!debugfs_create_file("etd", S_IRUGO, + imx21->debug_root, imx21, &debug_etd_fops)) + goto failed_create; + + if (!debugfs_create_file("statistics", S_IRUGO, + imx21->debug_root, imx21, &debug_statistics_fops)) + goto failed_create; + + if (!debugfs_create_file("isoc", S_IRUGO, + imx21->debug_root, imx21, &debug_isoc_fops)) + goto failed_create; + + return; + +failed_create: + debugfs_remove_recursive(imx21->debug_root); + +failed_create_rootdir: + imx21->debug_root = NULL; +} + + +static void remove_debug_files(struct imx21 *imx21) +{ + if (imx21->debug_root) { + debugfs_remove_recursive(imx21->debug_root); + imx21->debug_root = NULL; + } +} + +#endif + diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c new file mode 100644 index 000000000000..213e270e1c29 --- /dev/null +++ b/drivers/usb/host/imx21-hcd.c @@ -0,0 +1,1789 @@ +/* + * USB Host Controller Driver for IMX21 + * + * Copyright (C) 2006 Loping Dog Embedded Systems + * Copyright (C) 2009 Martin Fuzzey + * Originally written by Jay Monkman <jtm@lopingdog.com> + * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + + /* + * The i.MX21 USB hardware contains + * * 32 transfer descriptors (called ETDs) + * * 4Kb of Data memory + * + * The data memory is shared between the host and fuction controlers + * (but this driver only supports the host controler) + * + * So setting up a transfer involves: + * * Allocating a ETD + * * Fill in ETD with appropriate information + * * Allocating data memory (and putting the offset in the ETD) + * * Activate the ETD + * * Get interrupt when done. + * + * An ETD is assigned to each active endpoint. + * + * Low resource (ETD and Data memory) situations are handled differently for + * isochronous and non insosynchronous transactions : + * + * Non ISOC transfers are queued if either ETDs or Data memory are unavailable + * + * ISOC transfers use 2 ETDs per endpoint to achieve double buffering. + * They allocate both ETDs and Data memory during URB submission + * (and fail if unavailable). + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/usb.h> + +#include "../core/hcd.h" +#include "imx21-hcd.h" + +#ifdef DEBUG +#define DEBUG_LOG_FRAME(imx21, etd, event) \ + (etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB) +#else +#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0) +#endif + +static const char hcd_name[] = "imx21-hcd"; + +static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd) +{ + return (struct imx21 *)hcd->hcd_priv; +} + + +/* =========================================== */ +/* Hardware access helpers */ +/* =========================================== */ + +static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + writel(readl(reg) | mask, reg); +} + +static inline void clear_register_bits(struct imx21 *imx21, + u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + writel(readl(reg) & ~mask, reg); +} + +static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + + if (readl(reg) & mask) + writel(mask, reg); +} + +static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + + if (!(readl(reg) & mask)) + writel(mask, reg); +} + +static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value) +{ + writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword)); +} + +static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword) +{ + return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword)); +} + +static inline int wrap_frame(int counter) +{ + return counter & 0xFFFF; +} + +static inline int frame_after(int frame, int after) +{ + /* handle wrapping like jiffies time_afer */ + return (s16)((s16)after - (s16)frame) < 0; +} + +static int imx21_hc_get_frame(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + + return wrap_frame(readl(imx21->regs + USBH_FRMNUB)); +} + + +#include "imx21-dbg.c" + +/* =========================================== */ +/* ETD management */ +/* =========================================== */ + +static int alloc_etd(struct imx21 *imx21) +{ + int i; + struct etd_priv *etd = imx21->etd; + + for (i = 0; i < USB_NUM_ETD; i++, etd++) { + if (etd->alloc == 0) { + memset(etd, 0, sizeof(imx21->etd[0])); + etd->alloc = 1; + debug_etd_allocated(imx21); + return i; + } + } + return -1; +} + +static void disactivate_etd(struct imx21 *imx21, int num) +{ + int etd_mask = (1 << num); + struct etd_priv *etd = &imx21->etd[num]; + + writel(etd_mask, imx21->regs + USBH_ETDENCLR); + clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask); + writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR); + clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); + + etd->active_count = 0; + + DEBUG_LOG_FRAME(imx21, etd, disactivated); +} + +static void reset_etd(struct imx21 *imx21, int num) +{ + struct etd_priv *etd = imx21->etd + num; + int i; + + disactivate_etd(imx21, num); + + for (i = 0; i < 4; i++) + etd_writel(imx21, num, i, 0); + etd->urb = NULL; + etd->ep = NULL; + etd->td = NULL;; +} + +static void free_etd(struct imx21 *imx21, int num) +{ + if (num < 0) + return; + + if (num >= USB_NUM_ETD) { + dev_err(imx21->dev, "BAD etd=%d!\n", num); + return; + } + if (imx21->etd[num].alloc == 0) { + dev_err(imx21->dev, "ETD %d already free!\n", num); + return; + } + + debug_etd_freed(imx21); + reset_etd(imx21, num); + memset(&imx21->etd[num], 0, sizeof(imx21->etd[0])); +} + + +static void setup_etd_dword0(struct imx21 *imx21, + int etd_num, struct urb *urb, u8 dir, u16 maxpacket) +{ + etd_writel(imx21, etd_num, 0, + ((u32) usb_pipedevice(urb->pipe)) << DW0_ADDRESS | + ((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) | + ((u32) dir << DW0_DIRECT) | + ((u32) ((urb->dev->speed == USB_SPEED_LOW) ? + 1 : 0) << DW0_SPEED) | + ((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) | + ((u32) maxpacket << DW0_MAXPKTSIZ)); +} + +static void activate_etd(struct imx21 *imx21, + int etd_num, dma_addr_t dma, u8 dir) +{ + u32 etd_mask = 1 << etd_num; + struct etd_priv *etd = &imx21->etd[etd_num]; + + clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); + set_register_bits(imx21, USBH_ETDDONEEN, etd_mask); + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + + if (dma) { + set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask); + clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask); + writel(dma, imx21->regs + USB_ETDSMSA(etd_num)); + set_register_bits(imx21, USB_ETDDMAEN, etd_mask); + } else { + if (dir != TD_DIR_IN) { + /* need to set for ZLP */ + set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + } + } + + DEBUG_LOG_FRAME(imx21, etd, activated); + +#ifdef DEBUG + if (!etd->active_count) { + int i; + etd->activated_frame = readl(imx21->regs + USBH_FRMNUB); + etd->disactivated_frame = -1; + etd->last_int_frame = -1; + etd->last_req_frame = -1; + + for (i = 0; i < 4; i++) + etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i); + } +#endif + + etd->active_count = 1; + writel(etd_mask, imx21->regs + USBH_ETDENSET); +} + +/* =========================================== */ +/* Data memory management */ +/* =========================================== */ + +static int alloc_dmem(struct imx21 *imx21, unsigned int size, + struct usb_host_endpoint *ep) +{ + unsigned int offset = 0; + struct imx21_dmem_area *area; + struct imx21_dmem_area *tmp; + + size += (~size + 1) & 0x3; /* Round to 4 byte multiple */ + + if (size > DMEM_SIZE) { + dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n", + size, DMEM_SIZE); + return -EINVAL; + } + + list_for_each_entry(tmp, &imx21->dmem_list, list) { + if ((size + offset) < offset) + goto fail; + if ((size + offset) <= tmp->offset) + break; + offset = tmp->size + tmp->offset; + if ((offset + size) > DMEM_SIZE) + goto fail; + } + + area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC); + if (area == NULL) + return -ENOMEM; + + area->ep = ep; + area->offset = offset; + area->size = size; + list_add_tail(&area->list, &tmp->list); + debug_dmem_allocated(imx21, size); + return offset; + +fail: + return -ENOMEM; +} + +/* Memory now available for a queued ETD - activate it */ +static void activate_queued_etd(struct imx21 *imx21, + struct etd_priv *etd, u32 dmem_offset) +{ + struct urb_priv *urb_priv = etd->urb->hcpriv; + int etd_num = etd - &imx21->etd[0]; + u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD; + u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03; + + dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n", + etd_num); + etd_writel(imx21, etd_num, 1, + ((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset); + + urb_priv->active = 1; + activate_etd(imx21, etd_num, etd->dma_handle, dir); +} + +static void free_dmem(struct imx21 *imx21, int offset) +{ + struct imx21_dmem_area *area; + struct etd_priv *etd, *tmp; + int found = 0; + + list_for_each_entry(area, &imx21->dmem_list, list) { + if (area->offset == offset) { + debug_dmem_freed(imx21, area->size); + list_del(&area->list); + kfree(area); + found = 1; + break; + } + } + + if (!found) { + dev_err(imx21->dev, + "Trying to free unallocated DMEM %d\n", offset); + return; + } + + /* Try again to allocate memory for anything we've queued */ + list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) { + offset = alloc_dmem(imx21, etd->dmem_size, etd->ep); + if (offset >= 0) { + list_del(&etd->queue); + activate_queued_etd(imx21, etd, (u32)offset); + } + } +} + +static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) +{ + struct imx21_dmem_area *area, *tmp; + + list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) { + if (area->ep == ep) { + dev_err(imx21->dev, + "Active DMEM %d for disabled ep=%p\n", + area->offset, ep); + list_del(&area->list); + kfree(area); + } + } +} + + +/* =========================================== */ +/* End handling */ +/* =========================================== */ +static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb); + +/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) +{ + int etd_num; + int i; + + for (i = 0; i < NUM_ISO_ETDS; i++) { + etd_num = ep_priv->etd[i]; + if (etd_num < 0) + continue; + + ep_priv->etd[i] = -1; + if (list_empty(&imx21->queue_for_etd)) { + free_etd(imx21, etd_num); + continue; + } + + dev_dbg(imx21->dev, + "assigning idle etd %d for queued request\n", etd_num); + ep_priv = list_first_entry(&imx21->queue_for_etd, + struct ep_priv, queue); + list_del(&ep_priv->queue); + reset_etd(imx21, etd_num); + ep_priv->waiting_etd = 0; + ep_priv->etd[i] = etd_num; + + if (list_empty(&ep_priv->ep->urb_list)) { + dev_err(imx21->dev, "No urb for queued ep!\n"); + continue; + } + schedule_nonisoc_etd(imx21, list_first_entry( + &ep_priv->ep->urb_list, struct urb, urb_list)); + } +} + +static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status) +__releases(imx21->lock) +__acquires(imx21->lock) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct ep_priv *ep_priv = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + + debug_urb_completed(imx21, urb, status); + dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status); + + kfree(urb_priv->isoc_td); + kfree(urb->hcpriv); + urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock(&imx21->lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&imx21->lock); + if (list_empty(&ep_priv->ep->urb_list)) + ep_idle(imx21, ep_priv); +} + +/* =========================================== */ +/* ISOC Handling ... */ +/* =========================================== */ + +static void schedule_isoc_etds(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct ep_priv *ep_priv = ep->hcpriv; + struct etd_priv *etd; + struct urb_priv *urb_priv; + struct td *td; + int etd_num; + int i; + int cur_frame; + u8 dir; + + for (i = 0; i < NUM_ISO_ETDS; i++) { +too_late: + if (list_empty(&ep_priv->td_list)) + break; + + etd_num = ep_priv->etd[i]; + if (etd_num < 0) + break; + + etd = &imx21->etd[etd_num]; + if (etd->urb) + continue; + + td = list_entry(ep_priv->td_list.next, struct td, list); + list_del(&td->list); + urb_priv = td->urb->hcpriv; + + cur_frame = imx21_hc_get_frame(hcd); + if (frame_after(cur_frame, td->frame)) { + dev_dbg(imx21->dev, "isoc too late frame %d > %d\n", + cur_frame, td->frame); + urb_priv->isoc_status = -EXDEV; + td->urb->iso_frame_desc[ + td->isoc_index].actual_length = 0; + td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV; + if (--urb_priv->isoc_remaining == 0) + urb_done(hcd, td->urb, urb_priv->isoc_status); + goto too_late; + } + + urb_priv->active = 1; + etd->td = td; + etd->ep = td->ep; + etd->urb = td->urb; + etd->len = td->len; + + debug_isoc_submitted(imx21, cur_frame, td); + + dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN; + setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size); + etd_writel(imx21, etd_num, 1, etd->dmem_offset); + etd_writel(imx21, etd_num, 2, + (TD_NOTACCESSED << DW2_COMPCODE) | + ((td->frame & 0xFFFF) << DW2_STARTFRM)); + etd_writel(imx21, etd_num, 3, + (TD_NOTACCESSED << DW3_COMPCODE0) | + (td->len << DW3_PKTLEN0)); + + activate_etd(imx21, etd_num, td->data, dir); + } +} + +static void isoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int etd_mask = 1 << etd_num; + struct urb_priv *urb_priv = urb->hcpriv; + struct etd_priv *etd = imx21->etd + etd_num; + struct td *td = etd->td; + struct usb_host_endpoint *ep = etd->ep; + int isoc_index = td->isoc_index; + unsigned int pipe = urb->pipe; + int dir_in = usb_pipein(pipe); + int cc; + int bytes_xfrd; + + disactivate_etd(imx21, etd_num); + + cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf; + bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff; + + /* Input doesn't always fill the buffer, don't generate an error + * when this happens. + */ + if (dir_in && (cc == TD_DATAUNDERRUN)) + cc = TD_CC_NOERROR; + + if (cc == TD_NOTACCESSED) + bytes_xfrd = 0; + + debug_isoc_completed(imx21, + imx21_hc_get_frame(hcd), td, cc, bytes_xfrd); + if (cc) { + urb_priv->isoc_status = -EXDEV; + dev_dbg(imx21->dev, + "bad iso cc=0x%X frame=%d sched frame=%d " + "cnt=%d len=%d urb=%p etd=%d index=%d\n", + cc, imx21_hc_get_frame(hcd), td->frame, + bytes_xfrd, td->len, urb, etd_num, isoc_index); + } + + if (dir_in) + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + + urb->actual_length += bytes_xfrd; + urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd; + urb->iso_frame_desc[isoc_index].status = cc_to_error[cc]; + + etd->td = NULL; + etd->urb = NULL; + etd->ep = NULL; + + if (--urb_priv->isoc_remaining == 0) + urb_done(hcd, urb, urb_priv->isoc_status); + + schedule_isoc_etds(hcd, ep); +} + +static struct ep_priv *alloc_isoc_ep( + struct imx21 *imx21, struct usb_host_endpoint *ep) +{ + struct ep_priv *ep_priv; + int i; + + ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); + if (ep_priv == NULL) + return NULL; + + /* Allocate the ETDs */ + for (i = 0; i < NUM_ISO_ETDS; i++) { + ep_priv->etd[i] = alloc_etd(imx21); + if (ep_priv->etd[i] < 0) { + int j; + dev_err(imx21->dev, "isoc: Couldn't allocate etd\n"); + for (j = 0; j < i; j++) + free_etd(imx21, ep_priv->etd[j]); + goto alloc_etd_failed; + } + imx21->etd[ep_priv->etd[i]].ep = ep; + } + + INIT_LIST_HEAD(&ep_priv->td_list); + ep_priv->ep = ep; + ep->hcpriv = ep_priv; + return ep_priv; + +alloc_etd_failed: + kfree(ep_priv); + return NULL; +} + +static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, + struct usb_host_endpoint *ep, + struct urb *urb, gfp_t mem_flags) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct urb_priv *urb_priv; + unsigned long flags; + struct ep_priv *ep_priv; + struct td *td = NULL; + int i; + int ret; + int cur_frame; + u16 maxpacket; + + urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); + if (urb_priv == NULL) + return -ENOMEM; + + urb_priv->isoc_td = kzalloc( + sizeof(struct td) * urb->number_of_packets, mem_flags); + if (urb_priv->isoc_td == NULL) { + ret = -ENOMEM; + goto alloc_td_failed; + } + + spin_lock_irqsave(&imx21->lock, flags); + + if (ep->hcpriv == NULL) { + ep_priv = alloc_isoc_ep(imx21, ep); + if (ep_priv == NULL) { + ret = -ENOMEM; + goto alloc_ep_failed; + } + } else { + ep_priv = ep->hcpriv; + } + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto link_failed; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + urb_priv->ep = ep; + + /* allocate data memory for largest packets if not already done */ + maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + for (i = 0; i < NUM_ISO_ETDS; i++) { + struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]]; + + if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) { + /* not sure if this can really occur.... */ + dev_err(imx21->dev, "increasing isoc buffer %d->%d\n", + etd->dmem_size, maxpacket); + ret = -EMSGSIZE; + goto alloc_dmem_failed; + } + + if (etd->dmem_size == 0) { + etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep); + if (etd->dmem_offset < 0) { + dev_dbg(imx21->dev, "failed alloc isoc dmem\n"); + ret = -EAGAIN; + goto alloc_dmem_failed; + } + etd->dmem_size = maxpacket; + } + } + + /* calculate frame */ + cur_frame = imx21_hc_get_frame(hcd); + if (urb->transfer_flags & URB_ISO_ASAP) { + if (list_empty(&ep_priv->td_list)) + urb->start_frame = cur_frame + 5; + else + urb->start_frame = list_entry( + ep_priv->td_list.prev, + struct td, list)->frame + urb->interval; + } + urb->start_frame = wrap_frame(urb->start_frame); + if (frame_after(cur_frame, urb->start_frame)) { + dev_dbg(imx21->dev, + "enqueue: adjusting iso start %d (cur=%d) asap=%d\n", + urb->start_frame, cur_frame, + (urb->transfer_flags & URB_ISO_ASAP) != 0); + urb->start_frame = wrap_frame(cur_frame + 1); + } + + /* set up transfers */ + td = urb_priv->isoc_td; + for (i = 0; i < urb->number_of_packets; i++, td++) { + td->ep = ep; + td->urb = urb; + td->len = urb->iso_frame_desc[i].length; + td->isoc_index = i; + td->frame = wrap_frame(urb->start_frame + urb->interval * i); + td->data = urb->transfer_dma + urb->iso_frame_desc[i].offset; + list_add_tail(&td->list, &ep_priv->td_list); + } + + urb_priv->isoc_remaining = urb->number_of_packets; + dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n", + urb->number_of_packets, urb->start_frame, td->frame); + + debug_urb_submitted(imx21, urb); + schedule_isoc_etds(hcd, ep); + + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +alloc_dmem_failed: + usb_hcd_unlink_urb_from_ep(hcd, urb); + +link_failed: +alloc_ep_failed: + spin_unlock_irqrestore(&imx21->lock, flags); + kfree(urb_priv->isoc_td); + +alloc_td_failed: + kfree(urb_priv); + return ret; +} + +static void dequeue_isoc_urb(struct imx21 *imx21, + struct urb *urb, struct ep_priv *ep_priv) +{ + struct urb_priv *urb_priv = urb->hcpriv; + struct td *td, *tmp; + int i; + + if (urb_priv->active) { + for (i = 0; i < NUM_ISO_ETDS; i++) { + int etd_num = ep_priv->etd[i]; + if (etd_num != -1 && imx21->etd[etd_num].urb == urb) { + struct etd_priv *etd = imx21->etd + etd_num; + + reset_etd(imx21, etd_num); + if (etd->dmem_size) + free_dmem(imx21, etd->dmem_offset); + etd->dmem_size = 0; + } + } + } + + list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) { + if (td->urb == urb) { + dev_vdbg(imx21->dev, "removing td %p\n", td); + list_del(&td->list); + } + } +} + +/* =========================================== */ +/* NON ISOC Handling ... */ +/* =========================================== */ + +static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) +{ + unsigned int pipe = urb->pipe; + struct urb_priv *urb_priv = urb->hcpriv; + struct ep_priv *ep_priv = urb_priv->ep->hcpriv; + int state = urb_priv->state; + int etd_num = ep_priv->etd[0]; + struct etd_priv *etd; + int dmem_offset; + u32 count; + u16 etd_buf_size; + u16 maxpacket; + u8 dir; + u8 bufround; + u8 datatoggle; + u8 interval = 0; + u8 relpolpos = 0; + + if (etd_num < 0) { + dev_err(imx21->dev, "No valid ETD\n"); + return; + } + if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num)) + dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num); + + etd = &imx21->etd[etd_num]; + maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)); + if (!maxpacket) + maxpacket = 8; + + if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) { + if (state == US_CTRL_SETUP) { + dir = TD_DIR_SETUP; + etd->dma_handle = urb->setup_dma; + bufround = 0; + count = 8; + datatoggle = TD_TOGGLE_DATA0; + } else { /* US_CTRL_ACK */ + dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT; + etd->dma_handle = urb->transfer_dma; + bufround = 0; + count = 0; + datatoggle = TD_TOGGLE_DATA1; + } + } else { + dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; + bufround = (dir == TD_DIR_IN) ? 1 : 0; + etd->dma_handle = urb->transfer_dma; + if (usb_pipebulk(pipe) && (state == US_BULK0)) + count = 0; + else + count = urb->transfer_buffer_length; + + if (usb_pipecontrol(pipe)) { + datatoggle = TD_TOGGLE_DATA1; + } else { + if (usb_gettoggle( + urb->dev, + usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + datatoggle = TD_TOGGLE_DATA1; + else + datatoggle = TD_TOGGLE_DATA0; + } + } + + etd->urb = urb; + etd->ep = urb_priv->ep; + etd->len = count; + + if (usb_pipeint(pipe)) { + interval = urb->interval; + relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff; + } + + /* Write ETD to device memory */ + setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket); + + etd_writel(imx21, etd_num, 2, + (u32) interval << DW2_POLINTERV | + ((u32) relpolpos << DW2_RELPOLPOS) | + ((u32) dir << DW2_DIRPID) | + ((u32) bufround << DW2_BUFROUND) | + ((u32) datatoggle << DW2_DATATOG) | + ((u32) TD_NOTACCESSED << DW2_COMPCODE)); + + /* DMA will always transfer buffer size even if TOBYCNT in DWORD3 + is smaller. Make sure we don't overrun the buffer! + */ + if (count && count < maxpacket) + etd_buf_size = count; + else + etd_buf_size = maxpacket; + + etd_writel(imx21, etd_num, 3, + ((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count); + + if (!count) + etd->dma_handle = 0; + + /* allocate x and y buffer space at once */ + etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket; + dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep); + if (dmem_offset < 0) { + /* Setup everything we can in HW and update when we get DMEM */ + etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16); + + dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num); + debug_urb_queued_for_dmem(imx21, urb); + list_add_tail(&etd->queue, &imx21->queue_for_dmem); + return; + } + + etd_writel(imx21, etd_num, 1, + (((u32) dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) | + (u32) dmem_offset); + + urb_priv->active = 1; + + /* enable the ETD to kick off transfer */ + dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n", + etd_num, count, dir != TD_DIR_IN ? "out" : "in"); + activate_etd(imx21, etd_num, etd->dma_handle, dir); + +} + +static void nonisoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct etd_priv *etd = &imx21->etd[etd_num]; + u32 etd_mask = 1 << etd_num; + struct urb_priv *urb_priv = urb->hcpriv; + int dir; + u16 xbufaddr; + int cc; + u32 bytes_xfrd; + int etd_done; + + disactivate_etd(imx21, etd_num); + + dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3; + xbufaddr = etd_readl(imx21, etd_num, 1) & 0xffff; + cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf; + bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff); + + /* save toggle carry */ + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), + (etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1); + + if (dir == TD_DIR_IN) { + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + } + free_dmem(imx21, xbufaddr); + + urb->error_count = 0; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) + && (cc == TD_DATAUNDERRUN)) + cc = TD_CC_NOERROR; + + if (cc != 0) + dev_vdbg(imx21->dev, "cc is 0x%x\n", cc); + + etd_done = (cc_to_error[cc] != 0); /* stop if error */ + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + switch (urb_priv->state) { + case US_CTRL_SETUP: + if (urb->transfer_buffer_length > 0) + urb_priv->state = US_CTRL_DATA; + else + urb_priv->state = US_CTRL_ACK; + break; + case US_CTRL_DATA: + urb->actual_length += bytes_xfrd; + urb_priv->state = US_CTRL_ACK; + break; + case US_CTRL_ACK: + etd_done = 1; + break; + default: + dev_err(imx21->dev, + "Invalid pipe state %d\n", urb_priv->state); + etd_done = 1; + break; + } + break; + + case PIPE_BULK: + urb->actual_length += bytes_xfrd; + if ((urb_priv->state == US_BULK) + && (urb->transfer_flags & URB_ZERO_PACKET) + && urb->transfer_buffer_length > 0 + && ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) { + /* need a 0-packet */ + urb_priv->state = US_BULK0; + } else { + etd_done = 1; + } + break; + + case PIPE_INTERRUPT: + urb->actual_length += bytes_xfrd; + etd_done = 1; + break; + } + + if (!etd_done) { + dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state); + schedule_nonisoc_etd(imx21, urb); + } else { + struct usb_host_endpoint *ep = urb->ep; + + urb_done(hcd, urb, cc_to_error[cc]); + etd->urb = NULL; + + if (!list_empty(&ep->urb_list)) { + urb = list_first_entry(&ep->urb_list, + struct urb, urb_list); + dev_vdbg(imx21->dev, "next URB %p\n", urb); + schedule_nonisoc_etd(imx21, urb); + } + } +} + +static struct ep_priv *alloc_ep(void) +{ + int i; + struct ep_priv *ep_priv; + + ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); + if (!ep_priv) + return NULL; + + for (i = 0; i < NUM_ISO_ETDS; ++i) + ep_priv->etd[i] = -1; + + return ep_priv; +} + +static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, gfp_t mem_flags) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct usb_host_endpoint *ep = urb->ep; + struct urb_priv *urb_priv; + struct ep_priv *ep_priv; + struct etd_priv *etd; + int ret; + unsigned long flags; + int new_ep = 0; + + dev_vdbg(imx21->dev, + "enqueue urb=%p ep=%p len=%d " + "buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n", + urb, ep, + urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma, + urb->setup_packet, urb->setup_dma); + + if (usb_pipeisoc(urb->pipe)) + return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); + + urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + spin_lock_irqsave(&imx21->lock, flags); + + ep_priv = ep->hcpriv; + if (ep_priv == NULL) { + ep_priv = alloc_ep(); + if (!ep_priv) { + ret = -ENOMEM; + goto failed_alloc_ep; + } + ep->hcpriv = ep_priv; + ep_priv->ep = ep; + new_ep = 1; + } + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto failed_link; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + urb_priv->ep = ep; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + urb_priv->state = US_CTRL_SETUP; + break; + case PIPE_BULK: + urb_priv->state = US_BULK; + break; + } + + debug_urb_submitted(imx21, urb); + if (ep_priv->etd[0] < 0) { + if (ep_priv->waiting_etd) { + dev_dbg(imx21->dev, + "no ETD available already queued %p\n", + ep_priv); + debug_urb_queued_for_etd(imx21, urb); + goto out; + } + ep_priv->etd[0] = alloc_etd(imx21); + if (ep_priv->etd[0] < 0) { + dev_dbg(imx21->dev, + "no ETD available queueing %p\n", ep_priv); + debug_urb_queued_for_etd(imx21, urb); + list_add_tail(&ep_priv->queue, &imx21->queue_for_etd); + ep_priv->waiting_etd = 1; + goto out; + } + } + + /* Schedule if no URB already active for this endpoint */ + etd = &imx21->etd[ep_priv->etd[0]]; + if (etd->urb == NULL) { + DEBUG_LOG_FRAME(imx21, etd, last_req); + schedule_nonisoc_etd(imx21, urb); + } + +out: + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +failed_link: +failed_alloc_ep: + spin_unlock_irqrestore(&imx21->lock, flags); + kfree(urb_priv); + return ret; +} + +static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + struct usb_host_endpoint *ep; + struct ep_priv *ep_priv; + struct urb_priv *urb_priv = urb->hcpriv; + int ret = -EINVAL; + + dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n", + urb, usb_pipeisoc(urb->pipe), status); + + spin_lock_irqsave(&imx21->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto fail; + ep = urb_priv->ep; + ep_priv = ep->hcpriv; + + debug_urb_unlinked(imx21, urb); + + if (usb_pipeisoc(urb->pipe)) { + dequeue_isoc_urb(imx21, urb, ep_priv); + schedule_isoc_etds(hcd, ep); + } else if (urb_priv->active) { + int etd_num = ep_priv->etd[0]; + if (etd_num != -1) { + disactivate_etd(imx21, etd_num); + free_dmem(imx21, etd_readl(imx21, etd_num, 1) & 0xffff); + imx21->etd[etd_num].urb = NULL; + } + } + + urb_done(hcd, urb, status); + + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +fail: + spin_unlock_irqrestore(&imx21->lock, flags); + return ret; +} + +/* =========================================== */ +/* Interrupt dispatch */ +/* =========================================== */ + +static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof) +{ + int etd_num; + int enable_sof_int = 0; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) { + u32 etd_mask = 1 << etd_num; + u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask; + u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask; + struct etd_priv *etd = &imx21->etd[etd_num]; + + + if (done) { + DEBUG_LOG_FRAME(imx21, etd, last_int); + } else { +/* + * Kludge warning! + * + * When multiple transfers are using the bus we sometimes get into a state + * where the transfer has completed (the CC field of the ETD is != 0x0F), + * the ETD has self disabled but the ETDDONESTAT flag is not set + * (and hence no interrupt occurs). + * This causes the transfer in question to hang. + * The kludge below checks for this condition at each SOF and processes any + * blocked ETDs (after an arbitary 10 frame wait) + * + * With a single active transfer the usbtest test suite will run for days + * without the kludge. + * With other bus activity (eg mass storage) even just test1 will hang without + * the kludge. + */ + u32 dword0; + int cc; + + if (etd->active_count && !enabled) /* suspicious... */ + enable_sof_int = 1; + + if (!sof || enabled || !etd->active_count) + continue; + + cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE; + if (cc == TD_NOTACCESSED) + continue; + + if (++etd->active_count < 10) + continue; + + dword0 = etd_readl(imx21, etd_num, 0); + dev_dbg(imx21->dev, + "unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n", + etd_num, dword0 & 0x7F, + (dword0 >> DW0_ENDPNT) & 0x0F, + cc); + +#ifdef DEBUG + dev_dbg(imx21->dev, + "frame: act=%d disact=%d" + " int=%d req=%d cur=%d\n", + etd->activated_frame, + etd->disactivated_frame, + etd->last_int_frame, + etd->last_req_frame, + readl(imx21->regs + USBH_FRMNUB)); + imx21->debug_unblocks++; +#endif + etd->active_count = 0; +/* End of kludge */ + } + + if (etd->ep == NULL || etd->urb == NULL) { + dev_dbg(imx21->dev, + "Interrupt for unexpected etd %d" + " ep=%p urb=%p\n", + etd_num, etd->ep, etd->urb); + disactivate_etd(imx21, etd_num); + continue; + } + + if (usb_pipeisoc(etd->urb->pipe)) + isoc_etd_done(hcd, etd->urb, etd_num); + else + nonisoc_etd_done(hcd, etd->urb, etd_num); + } + + /* only enable SOF interrupt if it may be needed for the kludge */ + if (enable_sof_int) + set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); + else + clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); + + + spin_unlock_irqrestore(&imx21->lock, flags); +} + +static irqreturn_t imx21_irq(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + u32 ints = readl(imx21->regs + USBH_SYSISR); + + if (ints & USBH_SYSIEN_HERRINT) + dev_dbg(imx21->dev, "Scheduling error\n"); + + if (ints & USBH_SYSIEN_SORINT) + dev_dbg(imx21->dev, "Scheduling overrun\n"); + + if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT)) + process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT); + + writel(ints, imx21->regs + USBH_SYSISR); + return IRQ_HANDLED; +} + +static void imx21_hc_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + struct ep_priv *ep_priv; + int i; + + if (ep == NULL) + return; + + spin_lock_irqsave(&imx21->lock, flags); + ep_priv = ep->hcpriv; + dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv); + + if (!list_empty(&ep->urb_list)) + dev_dbg(imx21->dev, "ep's URB list is not empty\n"); + + if (ep_priv != NULL) { + for (i = 0; i < NUM_ISO_ETDS; i++) { + if (ep_priv->etd[i] > -1) + dev_dbg(imx21->dev, "free etd %d for disable\n", + ep_priv->etd[i]); + + free_etd(imx21, ep_priv->etd[i]); + } + kfree(ep_priv); + ep->hcpriv = NULL; + } + + for (i = 0; i < USB_NUM_ETD; i++) { + if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) { + dev_err(imx21->dev, + "Active etd %d for disabled ep=%p!\n", i, ep); + free_etd(imx21, i); + } + } + free_epdmem(imx21, ep); + spin_unlock_irqrestore(&imx21->lock, flags); +} + +/* =========================================== */ +/* Hub handling */ +/* =========================================== */ + +static int get_hub_descriptor(struct usb_hcd *hcd, + struct usb_hub_descriptor *desc) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + desc->bDescriptorType = 0x29; /* HUB descriptor */ + desc->bHubContrCurrent = 0; + + desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) + & USBH_ROOTHUBA_NDNSTMPRT_MASK; + desc->bDescLength = 9; + desc->bPwrOn2PwrGood = 0; + desc->wHubCharacteristics = (__force __u16) cpu_to_le16( + 0x0002 | /* No power switching */ + 0x0010 | /* No over current protection */ + 0); + + desc->bitmap[0] = 1 << 1; + desc->bitmap[1] = ~0; + return 0; +} + +static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int ports; + int changed = 0; + int i; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + ports = readl(imx21->regs + USBH_ROOTHUBA) + & USBH_ROOTHUBA_NDNSTMPRT_MASK; + if (ports > 7) { + ports = 7; + dev_err(imx21->dev, "ports %d > 7\n", ports); + } + for (i = 0; i < ports; i++) { + if (readl(imx21->regs + USBH_PORTSTAT(i)) & + (USBH_PORTSTAT_CONNECTSC | + USBH_PORTSTAT_PRTENBLSC | + USBH_PORTSTAT_PRTSTATSC | + USBH_PORTSTAT_OVRCURIC | + USBH_PORTSTAT_PRTRSTSC)) { + + changed = 1; + buf[0] |= 1 << (i + 1); + } + } + spin_unlock_irqrestore(&imx21->lock, flags); + + if (changed) + dev_info(imx21->dev, "Hub status changed\n"); + return changed; +} + +static int imx21_hc_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int rc = 0; + u32 status_write = 0; + + switch (typeReq) { + case ClearHubFeature: + dev_dbg(imx21->dev, "ClearHubFeature\n"); + switch (wValue) { + case C_HUB_OVER_CURRENT: + dev_dbg(imx21->dev, " OVER_CURRENT\n"); + break; + case C_HUB_LOCAL_POWER: + dev_dbg(imx21->dev, " LOCAL_POWER\n"); + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + break; + + case ClearPortFeature: + dev_dbg(imx21->dev, "ClearPortFeature\n"); + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + dev_dbg(imx21->dev, " ENABLE\n"); + status_write = USBH_PORTSTAT_CURCONST; + break; + case USB_PORT_FEAT_SUSPEND: + dev_dbg(imx21->dev, " SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTOVRCURI; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(imx21->dev, " POWER\n"); + status_write = USBH_PORTSTAT_LSDEVCON; + break; + case USB_PORT_FEAT_C_ENABLE: + dev_dbg(imx21->dev, " C_ENABLE\n"); + status_write = USBH_PORTSTAT_PRTENBLSC; + break; + case USB_PORT_FEAT_C_SUSPEND: + dev_dbg(imx21->dev, " C_SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTSTATSC; + break; + case USB_PORT_FEAT_C_CONNECTION: + dev_dbg(imx21->dev, " C_CONNECTION\n"); + status_write = USBH_PORTSTAT_CONNECTSC; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(imx21->dev, " C_OVER_CURRENT\n"); + status_write = USBH_PORTSTAT_OVRCURIC; + break; + case USB_PORT_FEAT_C_RESET: + dev_dbg(imx21->dev, " C_RESET\n"); + status_write = USBH_PORTSTAT_PRTRSTSC; + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + break; + + case GetHubDescriptor: + dev_dbg(imx21->dev, "GetHubDescriptor\n"); + rc = get_hub_descriptor(hcd, (void *)buf); + break; + + case GetHubStatus: + dev_dbg(imx21->dev, " GetHubStatus\n"); + *(__le32 *) buf = 0; + break; + + case GetPortStatus: + dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n", + wIndex, USBH_PORTSTAT(wIndex - 1)); + *(__le32 *) buf = readl(imx21->regs + + USBH_PORTSTAT(wIndex - 1)); + break; + + case SetHubFeature: + dev_dbg(imx21->dev, "SetHubFeature\n"); + switch (wValue) { + case C_HUB_OVER_CURRENT: + dev_dbg(imx21->dev, " OVER_CURRENT\n"); + break; + + case C_HUB_LOCAL_POWER: + dev_dbg(imx21->dev, " LOCAL_POWER\n"); + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + break; + + case SetPortFeature: + dev_dbg(imx21->dev, "SetPortFeature\n"); + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(imx21->dev, " SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTSUSPST; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(imx21->dev, " POWER\n"); + status_write = USBH_PORTSTAT_PRTPWRST; + break; + case USB_PORT_FEAT_RESET: + dev_dbg(imx21->dev, " RESET\n"); + status_write = USBH_PORTSTAT_PRTRSTST; + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + break; + + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + if (status_write) + writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1)); + return rc; +} + +/* =========================================== */ +/* Host controller management */ +/* =========================================== */ + +static int imx21_hc_reset(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long timeout; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + /* Reset the Host controler modules */ + writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH | + USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC, + imx21->regs + USBOTG_RST_CTRL); + + /* Wait for reset to finish */ + timeout = jiffies + HZ; + while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) { + if (time_after(jiffies, timeout)) { + spin_unlock_irqrestore(&imx21->lock, flags); + dev_err(imx21->dev, "timeout waiting for reset\n"); + return -ETIMEDOUT; + } + spin_unlock_irq(&imx21->lock); + schedule_timeout(1); + spin_lock_irq(&imx21->lock); + } + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; +} + +static int __devinit imx21_hc_start(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + int i, j; + u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST; + u32 usb_control = 0; + + hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) & + USBOTG_HWMODE_HOSTXCVR_MASK); + hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) & + USBOTG_HWMODE_OTGXCVR_MASK); + + if (imx21->pdata->host1_txenoe) + usb_control |= USBCTRL_HOST1_TXEN_OE; + + if (!imx21->pdata->host1_xcverless) + usb_control |= USBCTRL_HOST1_BYP_TLL; + + if (imx21->pdata->otg_ext_xcvr) + usb_control |= USBCTRL_OTC_RCV_RXDP; + + + spin_lock_irqsave(&imx21->lock, flags); + + writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN), + imx21->regs + USBOTG_CLK_CTRL); + writel(hw_mode, imx21->regs + USBOTG_HWMODE); + writel(usb_control, imx21->regs + USBCTRL); + writel(USB_MISCCONTROL_SKPRTRY | USB_MISCCONTROL_ARBMODE, + imx21->regs + USB_MISCCONTROL); + + /* Clear the ETDs */ + for (i = 0; i < USB_NUM_ETD; i++) + for (j = 0; j < 4; j++) + etd_writel(imx21, i, j, 0); + + /* Take the HC out of reset */ + writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1, + imx21->regs + USBH_HOST_CTRL); + + /* Enable ports */ + if (imx21->pdata->enable_otg_host) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(0)); + + if (imx21->pdata->enable_host1) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(1)); + + if (imx21->pdata->enable_host2) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(2)); + + + hcd->state = HC_STATE_RUNNING; + + /* Enable host controller interrupts */ + set_register_bits(imx21, USBH_SYSIEN, + USBH_SYSIEN_HERRINT | + USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT); + set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void imx21_hc_stop(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + writel(0, imx21->regs + USBH_SYSIEN); + clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); + clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN, + USBOTG_CLK_CTRL); + spin_unlock_irqrestore(&imx21->lock, flags); +} + +/* =========================================== */ +/* Driver glue */ +/* =========================================== */ + +static struct hc_driver imx21_hc_driver = { + .description = hcd_name, + .product_desc = "IMX21 USB Host Controller", + .hcd_priv_size = sizeof(struct imx21), + + .flags = HCD_USB11, + .irq = imx21_irq, + + .reset = imx21_hc_reset, + .start = imx21_hc_start, + .stop = imx21_hc_stop, + + /* I/O requests */ + .urb_enqueue = imx21_hc_urb_enqueue, + .urb_dequeue = imx21_hc_urb_dequeue, + .endpoint_disable = imx21_hc_endpoint_disable, + + /* scheduling support */ + .get_frame_number = imx21_hc_get_frame, + + /* Root hub support */ + .hub_status_data = imx21_hc_hub_status_data, + .hub_control = imx21_hc_hub_control, + +}; + +static struct mx21_usbh_platform_data default_pdata = { + .host_xcvr = MX21_USBXCVR_TXDIF_RXDIF, + .otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF, + .enable_host1 = 1, + .enable_host2 = 1, + .enable_otg_host = 1, + +}; + +static int imx21_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + remove_debug_files(imx21); + usb_remove_hcd(hcd); + + if (res != NULL) { + clk_disable(imx21->clk); + clk_put(imx21->clk); + iounmap(imx21->regs); + release_mem_region(res->start, resource_size(res)); + } + + kfree(hcd); + return 0; +} + + +static int imx21_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct imx21 *imx21; + struct resource *res; + int ret; + int irq; + + printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + hcd = usb_create_hcd(&imx21_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (hcd == NULL) { + dev_err(&pdev->dev, "Cannot create hcd (%s)\n", + dev_name(&pdev->dev)); + return -ENOMEM; + } + + imx21 = hcd_to_imx21(hcd); + imx21->dev = &pdev->dev; + imx21->pdata = pdev->dev.platform_data; + if (!imx21->pdata) + imx21->pdata = &default_pdata; + + spin_lock_init(&imx21->lock); + INIT_LIST_HEAD(&imx21->dmem_list); + INIT_LIST_HEAD(&imx21->queue_for_etd); + INIT_LIST_HEAD(&imx21->queue_for_dmem); + create_debug_files(imx21); + + res = request_mem_region(res->start, resource_size(res), hcd_name); + if (!res) { + ret = -EBUSY; + goto failed_request_mem; + } + + imx21->regs = ioremap(res->start, resource_size(res)); + if (imx21->regs == NULL) { + dev_err(imx21->dev, "Cannot map registers\n"); + ret = -ENOMEM; + goto failed_ioremap; + } + + /* Enable clocks source */ + imx21->clk = clk_get(imx21->dev, NULL); + if (IS_ERR(imx21->clk)) { + dev_err(imx21->dev, "no clock found\n"); + ret = PTR_ERR(imx21->clk); + goto failed_clock_get; + } + + ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000)); + if (ret) + goto failed_clock_set; + ret = clk_enable(imx21->clk); + if (ret) + goto failed_clock_enable; + + dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n", + (readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF); + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret != 0) { + dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); + goto failed_add_hcd; + } + + return 0; + +failed_add_hcd: + clk_disable(imx21->clk); +failed_clock_enable: +failed_clock_set: + clk_put(imx21->clk); +failed_clock_get: + iounmap(imx21->regs); +failed_ioremap: + release_mem_region(res->start, res->end - res->start); +failed_request_mem: + remove_debug_files(imx21); + usb_put_hcd(hcd); + return ret; +} + +static struct platform_driver imx21_hcd_driver = { + .driver = { + .name = (char *)hcd_name, + }, + .probe = imx21_probe, + .remove = imx21_remove, + .suspend = NULL, + .resume = NULL, +}; + +static int __init imx21_hcd_init(void) +{ + return platform_driver_register(&imx21_hcd_driver); +} + +static void __exit imx21_hcd_cleanup(void) +{ + platform_driver_unregister(&imx21_hcd_driver); +} + +module_init(imx21_hcd_init); +module_exit(imx21_hcd_cleanup); + +MODULE_DESCRIPTION("i.MX21 USB Host controller"); +MODULE_AUTHOR("Martin Fuzzey"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx21-hcd"); diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h new file mode 100644 index 000000000000..1b0d913780a5 --- /dev/null +++ b/drivers/usb/host/imx21-hcd.h @@ -0,0 +1,436 @@ +/* + * Macros and prototypes for i.MX21 + * + * Copyright (C) 2006 Loping Dog Embedded Systems + * Copyright (C) 2009 Martin Fuzzey + * Originally written by Jay Monkman <jtm@lopingdog.com> + * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_IMX21_HCD_H__ +#define __LINUX_IMX21_HCD_H__ + +#include <mach/mx21-usbhost.h> + +#define NUM_ISO_ETDS 2 +#define USB_NUM_ETD 32 +#define DMEM_SIZE 4096 + +/* Register definitions */ +#define USBOTG_HWMODE 0x00 +#define USBOTG_HWMODE_ANASDBEN (1 << 14) +#define USBOTG_HWMODE_OTGXCVR_SHIFT 6 +#define USBOTG_HWMODE_OTGXCVR_MASK (3 << 6) +#define USBOTG_HWMODE_OTGXCVR_TD_RD (0 << 6) +#define USBOTG_HWMODE_OTGXCVR_TS_RD (2 << 6) +#define USBOTG_HWMODE_OTGXCVR_TD_RS (1 << 6) +#define USBOTG_HWMODE_OTGXCVR_TS_RS (3 << 6) +#define USBOTG_HWMODE_HOSTXCVR_SHIFT 4 +#define USBOTG_HWMODE_HOSTXCVR_MASK (3 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TD_RD (0 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TS_RD (2 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TD_RS (1 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TS_RS (3 << 4) +#define USBOTG_HWMODE_CRECFG_MASK (3 << 0) +#define USBOTG_HWMODE_CRECFG_HOST (1 << 0) +#define USBOTG_HWMODE_CRECFG_FUNC (2 << 0) +#define USBOTG_HWMODE_CRECFG_HNP (3 << 0) + +#define USBOTG_CINT_STAT 0x04 +#define USBOTG_CINT_STEN 0x08 +#define USBOTG_ASHNPINT (1 << 5) +#define USBOTG_ASFCINT (1 << 4) +#define USBOTG_ASHCINT (1 << 3) +#define USBOTG_SHNPINT (1 << 2) +#define USBOTG_FCINT (1 << 1) +#define USBOTG_HCINT (1 << 0) + +#define USBOTG_CLK_CTRL 0x0c +#define USBOTG_CLK_CTRL_FUNC (1 << 2) +#define USBOTG_CLK_CTRL_HST (1 << 1) +#define USBOTG_CLK_CTRL_MAIN (1 << 0) + +#define USBOTG_RST_CTRL 0x10 +#define USBOTG_RST_RSTI2C (1 << 15) +#define USBOTG_RST_RSTCTRL (1 << 5) +#define USBOTG_RST_RSTFC (1 << 4) +#define USBOTG_RST_RSTFSKE (1 << 3) +#define USBOTG_RST_RSTRH (1 << 2) +#define USBOTG_RST_RSTHSIE (1 << 1) +#define USBOTG_RST_RSTHC (1 << 0) + +#define USBOTG_FRM_INTVL 0x14 +#define USBOTG_FRM_REMAIN 0x18 +#define USBOTG_HNP_CSR 0x1c +#define USBOTG_HNP_ISR 0x2c +#define USBOTG_HNP_IEN 0x30 + +#define USBOTG_I2C_TXCVR_REG(x) (0x100 + (x)) +#define USBOTG_I2C_XCVR_DEVAD 0x118 +#define USBOTG_I2C_SEQ_OP_REG 0x119 +#define USBOTG_I2C_SEQ_RD_STARTAD 0x11a +#define USBOTG_I2C_OP_CTRL_REG 0x11b +#define USBOTG_I2C_SCLK_TO_SCK_HPER 0x11e +#define USBOTG_I2C_MASTER_INT_REG 0x11f + +#define USBH_HOST_CTRL 0x80 +#define USBH_HOST_CTRL_HCRESET (1 << 31) +#define USBH_HOST_CTRL_SCHDOVR(x) ((x) << 16) +#define USBH_HOST_CTRL_RMTWUEN (1 << 4) +#define USBH_HOST_CTRL_HCUSBSTE_RESET (0 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_RESUME (1 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL (2 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_SUSPEND (3 << 2) +#define USBH_HOST_CTRL_CTLBLKSR_1 (0 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_2 (1 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_3 (2 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_4 (3 << 0) + +#define USBH_SYSISR 0x88 +#define USBH_SYSISR_PSCINT (1 << 6) +#define USBH_SYSISR_FMOFINT (1 << 5) +#define USBH_SYSISR_HERRINT (1 << 4) +#define USBH_SYSISR_RESDETINT (1 << 3) +#define USBH_SYSISR_SOFINT (1 << 2) +#define USBH_SYSISR_DONEINT (1 << 1) +#define USBH_SYSISR_SORINT (1 << 0) + +#define USBH_SYSIEN 0x8c +#define USBH_SYSIEN_PSCINT (1 << 6) +#define USBH_SYSIEN_FMOFINT (1 << 5) +#define USBH_SYSIEN_HERRINT (1 << 4) +#define USBH_SYSIEN_RESDETINT (1 << 3) +#define USBH_SYSIEN_SOFINT (1 << 2) +#define USBH_SYSIEN_DONEINT (1 << 1) +#define USBH_SYSIEN_SORINT (1 << 0) + +#define USBH_XBUFSTAT 0x98 +#define USBH_YBUFSTAT 0x9c +#define USBH_XYINTEN 0xa0 +#define USBH_XFILLSTAT 0xa8 +#define USBH_YFILLSTAT 0xac +#define USBH_ETDENSET 0xc0 +#define USBH_ETDENCLR 0xc4 +#define USBH_IMMEDINT 0xcc +#define USBH_ETDDONESTAT 0xd0 +#define USBH_ETDDONEEN 0xd4 +#define USBH_FRMNUB 0xe0 +#define USBH_LSTHRESH 0xe4 + +#define USBH_ROOTHUBA 0xe8 +#define USBH_ROOTHUBA_PWRTOGOOD_MASK (0xff) +#define USBH_ROOTHUBA_PWRTOGOOD_SHIFT (24) +#define USBH_ROOTHUBA_NOOVRCURP (1 << 12) +#define USBH_ROOTHUBA_OVRCURPM (1 << 11) +#define USBH_ROOTHUBA_DEVTYPE (1 << 10) +#define USBH_ROOTHUBA_PWRSWTMD (1 << 9) +#define USBH_ROOTHUBA_NOPWRSWT (1 << 8) +#define USBH_ROOTHUBA_NDNSTMPRT_MASK (0xff) + +#define USBH_ROOTHUBB 0xec +#define USBH_ROOTHUBB_PRTPWRCM(x) (1 << ((x) + 16)) +#define USBH_ROOTHUBB_DEVREMOVE(x) (1 << (x)) + +#define USBH_ROOTSTAT 0xf0 +#define USBH_ROOTSTAT_CLRRMTWUE (1 << 31) +#define USBH_ROOTSTAT_OVRCURCHG (1 << 17) +#define USBH_ROOTSTAT_DEVCONWUE (1 << 15) +#define USBH_ROOTSTAT_OVRCURI (1 << 1) +#define USBH_ROOTSTAT_LOCPWRS (1 << 0) + +#define USBH_PORTSTAT(x) (0xf4 + ((x) * 4)) +#define USBH_PORTSTAT_PRTRSTSC (1 << 20) +#define USBH_PORTSTAT_OVRCURIC (1 << 19) +#define USBH_PORTSTAT_PRTSTATSC (1 << 18) +#define USBH_PORTSTAT_PRTENBLSC (1 << 17) +#define USBH_PORTSTAT_CONNECTSC (1 << 16) +#define USBH_PORTSTAT_LSDEVCON (1 << 9) +#define USBH_PORTSTAT_PRTPWRST (1 << 8) +#define USBH_PORTSTAT_PRTRSTST (1 << 4) +#define USBH_PORTSTAT_PRTOVRCURI (1 << 3) +#define USBH_PORTSTAT_PRTSUSPST (1 << 2) +#define USBH_PORTSTAT_PRTENABST (1 << 1) +#define USBH_PORTSTAT_CURCONST (1 << 0) + +#define USB_DMAREV 0x800 +#define USB_DMAINTSTAT 0x804 +#define USB_DMAINTSTAT_EPERR (1 << 1) +#define USB_DMAINTSTAT_ETDERR (1 << 0) + +#define USB_DMAINTEN 0x808 +#define USB_DMAINTEN_EPERRINTEN (1 << 1) +#define USB_DMAINTEN_ETDERRINTEN (1 << 0) + +#define USB_ETDDMAERSTAT 0x80c +#define USB_EPDMAERSTAT 0x810 +#define USB_ETDDMAEN 0x820 +#define USB_EPDMAEN 0x824 +#define USB_ETDDMAXTEN 0x828 +#define USB_EPDMAXTEN 0x82c +#define USB_ETDDMAENXYT 0x830 +#define USB_EPDMAENXYT 0x834 +#define USB_ETDDMABST4EN 0x838 +#define USB_EPDMABST4EN 0x83c + +#define USB_MISCCONTROL 0x840 +#define USB_MISCCONTROL_ISOPREVFRM (1 << 3) +#define USB_MISCCONTROL_SKPRTRY (1 << 2) +#define USB_MISCCONTROL_ARBMODE (1 << 1) +#define USB_MISCCONTROL_FILTCC (1 << 0) + +#define USB_ETDDMACHANLCLR 0x848 +#define USB_EPDMACHANLCLR 0x84c +#define USB_ETDSMSA(x) (0x900 + ((x) * 4)) +#define USB_EPSMSA(x) (0x980 + ((x) * 4)) +#define USB_ETDDMABUFPTR(x) (0xa00 + ((x) * 4)) +#define USB_EPDMABUFPTR(x) (0xa80 + ((x) * 4)) + +#define USB_ETD_DWORD(x, w) (0x200 + ((x) * 16) + ((w) * 4)) +#define DW0_ADDRESS 0 +#define DW0_ENDPNT 7 +#define DW0_DIRECT 11 +#define DW0_SPEED 13 +#define DW0_FORMAT 14 +#define DW0_MAXPKTSIZ 16 +#define DW0_HALTED 27 +#define DW0_TOGCRY 28 +#define DW0_SNDNAK 30 + +#define DW1_XBUFSRTAD 0 +#define DW1_YBUFSRTAD 16 + +#define DW2_RTRYDELAY 0 +#define DW2_POLINTERV 0 +#define DW2_STARTFRM 0 +#define DW2_RELPOLPOS 8 +#define DW2_DIRPID 16 +#define DW2_BUFROUND 18 +#define DW2_DELAYINT 19 +#define DW2_DATATOG 22 +#define DW2_ERRORCNT 24 +#define DW2_COMPCODE 28 + +#define DW3_TOTBYECNT 0 +#define DW3_PKTLEN0 0 +#define DW3_COMPCODE0 12 +#define DW3_PKTLEN1 16 +#define DW3_BUFSIZE 21 +#define DW3_COMPCODE1 28 + +#define USBCTRL 0x600 +#define USBCTRL_I2C_WU_INT_STAT (1 << 27) +#define USBCTRL_OTG_WU_INT_STAT (1 << 26) +#define USBCTRL_HOST_WU_INT_STAT (1 << 25) +#define USBCTRL_FNT_WU_INT_STAT (1 << 24) +#define USBCTRL_I2C_WU_INT_EN (1 << 19) +#define USBCTRL_OTG_WU_INT_EN (1 << 18) +#define USBCTRL_HOST_WU_INT_EN (1 << 17) +#define USBCTRL_FNT_WU_INT_EN (1 << 16) +#define USBCTRL_OTC_RCV_RXDP (1 << 13) +#define USBCTRL_HOST1_BYP_TLL (1 << 12) +#define USBCTRL_OTG_BYP_VAL(x) ((x) << 10) +#define USBCTRL_HOST1_BYP_VAL(x) ((x) << 8) +#define USBCTRL_OTG_PWR_MASK (1 << 6) +#define USBCTRL_HOST1_PWR_MASK (1 << 5) +#define USBCTRL_HOST2_PWR_MASK (1 << 4) +#define USBCTRL_USB_BYP (1 << 2) +#define USBCTRL_HOST1_TXEN_OE (1 << 1) + + +/* Values in TD blocks */ +#define TD_DIR_SETUP 0 +#define TD_DIR_OUT 1 +#define TD_DIR_IN 2 +#define TD_FORMAT_CONTROL 0 +#define TD_FORMAT_ISO 1 +#define TD_FORMAT_BULK 2 +#define TD_FORMAT_INT 3 +#define TD_TOGGLE_CARRY 0 +#define TD_TOGGLE_DATA0 2 +#define TD_TOGGLE_DATA1 3 + +/* control transfer states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +/* bulk transfer main state and 0-length packet */ +#define US_BULK 1 +#define US_BULK0 0 + +/*ETD format description*/ +#define IMX_FMT_CTRL 0x0 +#define IMX_FMT_ISO 0x1 +#define IMX_FMT_BULK 0x2 +#define IMX_FMT_INT 0x3 + +static char fmt_urb_to_etd[4] = { +/*PIPE_ISOCHRONOUS*/ IMX_FMT_ISO, +/*PIPE_INTERRUPT*/ IMX_FMT_INT, +/*PIPE_CONTROL*/ IMX_FMT_CTRL, +/*PIPE_BULK*/ IMX_FMT_BULK +}; + +/* condition (error) CC codes and mapping (OHCI like) */ + +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +/*#define TD_UNEXPECTEDPID 0x07 - reserved, not active on MX2*/ +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D +#define TD_SCHEDULEOVERRUN 0x0E +#define TD_NOTACCESSED 0x0F + +static const int cc_to_error[16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIMEDOUT, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -ENOSPC, + /* (for HCD) */ -EALREADY +}; + +/* HCD data associated with a usb core URB */ +struct urb_priv { + struct urb *urb; + struct usb_host_endpoint *ep; + int active; + int state; + struct td *isoc_td; + int isoc_remaining; + int isoc_status; +}; + +/* HCD data associated with a usb core endpoint */ +struct ep_priv { + struct usb_host_endpoint *ep; + struct list_head td_list; + struct list_head queue; + int etd[NUM_ISO_ETDS]; + int waiting_etd; +}; + +/* isoc packet */ +struct td { + struct list_head list; + struct urb *urb; + struct usb_host_endpoint *ep; + dma_addr_t data; + unsigned long buf_addr; + int len; + int frame; + int isoc_index; +}; + +/* HCD data associated with a hardware ETD */ +struct etd_priv { + struct usb_host_endpoint *ep; + struct urb *urb; + struct td *td; + struct list_head queue; + dma_addr_t dma_handle; + int alloc; + int len; + int dmem_size; + int dmem_offset; + int active_count; +#ifdef DEBUG + int activated_frame; + int disactivated_frame; + int last_int_frame; + int last_req_frame; + u32 submitted_dwords[4]; +#endif +}; + +/* Hardware data memory info */ +struct imx21_dmem_area { + struct usb_host_endpoint *ep; + unsigned int offset; + unsigned int size; + struct list_head list; +}; + +#ifdef DEBUG +struct debug_usage_stats { + unsigned int value; + unsigned int maximum; +}; + +struct debug_stats { + unsigned long submitted; + unsigned long completed_ok; + unsigned long completed_failed; + unsigned long unlinked; + unsigned long queue_etd; + unsigned long queue_dmem; +}; + +struct debug_isoc_trace { + int schedule_frame; + int submit_frame; + int request_len; + int done_frame; + int done_len; + int cc; + struct td *td; +}; +#endif + +/* HCD data structure */ +struct imx21 { + spinlock_t lock; + struct device *dev; + struct mx21_usbh_platform_data *pdata; + struct list_head dmem_list; + struct list_head queue_for_etd; /* eps queued due to etd shortage */ + struct list_head queue_for_dmem; /* etds queued due to dmem shortage */ + struct etd_priv etd[USB_NUM_ETD]; + struct clk *clk; + void __iomem *regs; +#ifdef DEBUG + struct dentry *debug_root; + struct debug_stats nonisoc_stats; + struct debug_stats isoc_stats; + struct debug_usage_stats etd_usage; + struct debug_usage_stats dmem_usage; + struct debug_isoc_trace isoc_trace[20]; + struct debug_isoc_trace isoc_trace_failed[20]; + unsigned long debug_unblocks; + int isoc_trace_index; + int isoc_trace_index_failed; +#endif +}; + +#endif diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 42971657fde2..217fb5170200 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1257,7 +1257,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd, /* avoid all allocations within spinlocks: request or endpoint */ if (!hep->hcpriv) { - ep = kcalloc(1, sizeof *ep, mem_flags); + ep = kzalloc(sizeof *ep, mem_flags); if (!ep) return -ENOMEM; } @@ -2719,24 +2719,11 @@ static int __init isp1362_probe(struct platform_device *pdev) } irq = irq_res->start; -#ifdef CONFIG_USB_HCD_DMA - if (pdev->dev.dma_mask) { - struct resource *dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - - if (!dma_res) { - retval = -ENODEV; - goto err1; - } - isp1362_hcd->data_dma = dma_res->start; - isp1362_hcd->max_dma_size = resource_len(dma_res); - } -#else if (pdev->dev.dma_mask) { DBG(1, "won't do DMA"); retval = -ENODEV; goto err1; } -#endif if (!request_mem_region(addr->start, resource_len(addr), hcd_name)) { retval = -EBUSY; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 27b8f7cb4471..9f01293600b0 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -17,7 +17,9 @@ #include <linux/debugfs.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/mm.h> #include <asm/unaligned.h> +#include <asm/cacheflush.h> #include "../core/hcd.h" #include "isp1760-hcd.h" @@ -904,6 +906,14 @@ __acquires(priv->lock) status = 0; } + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_page(virt_to_page(ptr)); + } + /* complete() can reenter this HCD */ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); spin_unlock(&priv->lock); diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 1c9f977a5c9c..4293cfd28d61 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -109,7 +109,7 @@ static int of_isp1760_remove(struct of_device *dev) return 0; } -static struct of_device_id of_isp1760_match[] = { +static const struct of_device_id of_isp1760_match[] = { { .compatible = "nxp,usb-isp1760", }, diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 000000000000..4aa08d36d077 --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,456 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * TI DA8xx (OMAP-L1x) Bus Glue + * + * Derived from: ohci-omap.c and ohci-s3c2410.c + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <mach/da8xx.h> +#include <mach/usb.h> + +#ifndef CONFIG_ARCH_DAVINCI_DA8XX +#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." +#endif + +#define CFGCHIP2 DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG) + +static struct clk *usb11_clk; +static struct clk *usb20_clk; + +/* Over-current indicator change bitmask */ +static volatile u16 ocic_mask; + +static void ohci_da8xx_clock(int on) +{ + u32 cfgchip2; + + cfgchip2 = __raw_readl(CFGCHIP2); + if (on) { + clk_enable(usb11_clk); + + /* + * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we + * need to enable the USB 2.0 module clocking, start its PHY, + * and not allow it to stop the clock during USB 2.0 suspend. + */ + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) { + clk_enable(usb20_clk); + + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); + cfgchip2 |= CFGCHIP2_PHY_PLLON; + __raw_writel(cfgchip2, CFGCHIP2); + + pr_info("Waiting for USB PHY clock good...\n"); + while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) + cpu_relax(); + } + + /* Enable USB 1.1 PHY */ + cfgchip2 |= CFGCHIP2_USB1SUSPENDM; + } else { + clk_disable(usb11_clk); + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) + clk_disable(usb20_clk); + + /* Disable USB 1.1 PHY */ + cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM; + } + __raw_writel(cfgchip2, CFGCHIP2); +} + +/* + * Handle the port over-current indicator change. + */ +static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, + unsigned port) +{ + ocic_mask |= 1 << port; + + /* Once over-current is detected, the port needs to be powered down */ + if (hub->get_oci(port) > 0) + hub->set_power(port, 0); +} + +static int ohci_da8xx_init(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + u32 rh_a; + + dev_dbg(dev, "starting USB controller\n"); + + ohci_da8xx_clock(1); + + /* + * DA8xx only have 1 port connected to the pins but the HC root hub + * register A reports 2 ports, thus we'll have to override it... + */ + ohci->num_ports = 1; + + result = ohci_init(ohci); + if (result < 0) + return result; + + /* + * Since we're providing a board-specific root hub port power control + * and over-current reporting, we have to override the HC root hub A + * register's default value, so that ohci_hub_control() could return + * the correct hub descriptor... + */ + rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); + if (hub->set_power) { + rh_a &= ~RH_A_NPS; + rh_a |= RH_A_PSM; + } + if (hub->get_oci) { + rh_a &= ~RH_A_NOCP; + rh_a |= RH_A_OCPM; + } + rh_a &= ~RH_A_POTPGT; + rh_a |= hub->potpgt << 24; + ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); + + return result; +} + +static void ohci_da8xx_stop(struct usb_hcd *hcd) +{ + ohci_stop(hcd); + ohci_da8xx_clock(0); +} + +static int ohci_da8xx_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + + result = ohci_run(ohci); + if (result < 0) + ohci_da8xx_stop(hcd); + + return result; +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + int length = ohci_hub_status_data(hcd, buf); + + /* See if we have OCIC bit set on port 1 */ + if (ocic_mask & (1 << 1)) { + dev_dbg(hcd->self.controller, "over-current indicator change " + "on port 1\n"); + + if (!length) + length = 1; + + buf[0] |= 1 << 1; + } + return length; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + int temp; + + switch (typeReq) { + case GetPortStatus: + /* Check the port number */ + if (wIndex != 1) + break; + + dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); + + temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); + + /* The port power status (PPS) bit defaults to 1 */ + if (hub->get_power && hub->get_power(wIndex) == 0) + temp &= ~RH_PS_PPS; + + /* The port over-current indicator (POCI) bit is always 0 */ + if (hub->get_oci && hub->get_oci(wIndex) > 0) + temp |= RH_PS_POCI; + + /* The over-current indicator change (OCIC) bit is 0 too */ + if (ocic_mask & (1 << wIndex)) + temp |= RH_PS_OCIC; + + put_unaligned(cpu_to_le32(temp), (__le32 *)buf); + return 0; + case SetPortFeature: + temp = 1; + goto check_port; + case ClearPortFeature: + temp = 0; + +check_port: + /* Check the port number */ + if (wIndex != 1) + break; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, "POWER"); + + if (!hub->set_power) + return -EPIPE; + + return hub->set_power(wIndex, temp) ? -EPIPE : 0; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, + "C_OVER_CURRENT"); + + if (temp) + ocic_mask |= 1 << wIndex; + else + ocic_mask &= ~(1 << wIndex); + return 0; + } + } + + return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +} + +static const struct hc_driver ohci_da8xx_hc_driver = { + .description = hcd_name, + .product_desc = "DA8xx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_da8xx_init, + .start = ohci_da8xx_start, + .stop = ohci_da8xx_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_da8xx_hub_status_data, + .hub_control = ohci_da8xx_hub_control, + +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + + +/** + * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int usb_hcd_da8xx_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + struct usb_hcd *hcd; + struct resource *mem; + int error, irq; + + if (hub == NULL) + return -ENODEV; + + usb11_clk = clk_get(&pdev->dev, "usb11"); + if (IS_ERR(usb11_clk)) + return PTR_ERR(usb11_clk); + + usb20_clk = clk_get(&pdev->dev, "usb20"); + if (IS_ERR(usb20_clk)) { + error = PTR_ERR(usb20_clk); + goto err0; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + error = -ENOMEM; + goto err1; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + error = -ENODEV; + goto err2; + } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = mem->end - mem->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + error = -EBUSY; + goto err2; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + error = -ENOMEM; + goto err3; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + error = -ENODEV; + goto err4; + } + error = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (error) + goto err4; + + if (hub->ocic_notify) { + error = hub->ocic_notify(ohci_da8xx_ocic_handler); + if (!error) + return 0; + } + + usb_remove_hcd(hcd); +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + clk_put(usb20_clk); +err0: + clk_put(usb11_clk); + return error; +} + +/** + * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_da8xx_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + */ +static inline void +usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + + hub->ocic_notify(NULL); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + clk_put(usb20_clk); + clk_put(usb11_clk); +} + +static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev) +{ + return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev); +} + +static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_hcd_da8xx_remove(hcd, dev); + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(0); + hcd->state = HC_STATE_SUSPENDED; + dev->dev.power.power_state = PMSG_SUSPEND; + return 0; +} + +static int ohci_da8xx_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(1); + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + return 0; +} +#endif + +/* + * Driver definition to register with platform structure. + */ +static struct platform_driver ohci_hcd_da8xx_driver = { + .probe = ohci_hcd_da8xx_drv_probe, + .remove = ohci_hcd_da8xx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, +#ifdef CONFIG_PM + .suspend = ohci_da8xx_suspend, + .resume = ohci_da8xx_resume, +#endif + .driver = { + .owner = THIS_MODULE, + .name = "ohci", + }, +}; diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 811f5dfdc582..8ad2441b0284 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -53,13 +53,13 @@ urb_print(struct urb * urb, char * str, int small, int status) int i, len; if (usb_pipecontrol (pipe)) { - printk (KERN_DEBUG __FILE__ ": setup(8):"); + printk (KERN_DEBUG "%s: setup(8):", __FILE__); for (i = 0; i < 8 ; i++) printk (" %02x", ((__u8 *) urb->setup_packet) [i]); printk ("\n"); } if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) { - printk (KERN_DEBUG __FILE__ ": data(%d/%d):", + printk (KERN_DEBUG "%s: data(%d/%d):", __FILE__, urb->actual_length, urb->transfer_buffer_length); len = usb_pipeout (pipe)? diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 24eb74781919..afe59be23645 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1051,6 +1051,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER usb_hcd_pnx4008_driver #endif +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#include "ohci-da8xx.c" +#define PLATFORM_DRIVER ohci_hcd_da8xx_driver +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7763) || \ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index de42283149c7..18d39f0463ee 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -28,8 +28,8 @@ extern int usb_disabled(void); static void lh7a404_start_hc(struct platform_device *dev) { - printk(KERN_DEBUG __FILE__ - ": starting LH7A404 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n", + __FILE__); /* * Now, carefully enable the USB clock, and take @@ -39,14 +39,13 @@ static void lh7a404_start_hc(struct platform_device *dev) udelay(1000); USBH_CMDSTATUS = OHCI_HCR; - printk(KERN_DEBUG __FILE__ - ": Clock to USB host has been enabled \n"); + printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__); } static void lh7a404_stop_hc(struct platform_device *dev) { - printk(KERN_DEBUG __FILE__ - ": stopping LH7A404 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n", + __FILE__); CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */ } diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 2769326da42e..cd74bbdd007c 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -327,7 +327,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) } i2c_adap = i2c_get_adapter(2); memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE); + strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, normal_i2c); i2c_put_adapter(i2c_adap); @@ -411,7 +411,7 @@ out3: out2: clk_put(usb_clk); out1: - i2c_unregister_client(isp1301_i2c_client); + i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; out_i2c_driver: i2c_del_driver(&isp1301_driver); @@ -430,7 +430,7 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev) pnx4008_unset_usb_bits(); clk_disable(usb_clk); clk_put(usb_clk); - i2c_unregister_client(isp1301_i2c_client); + i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; i2c_del_driver(&isp1301_driver); diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 68a301710297..103263c230cf 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -114,21 +114,21 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -169,7 +169,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) } else release_mem_region(res.start, 0x4); } else - pr_debug(__FILE__ ": cannot get ehci offset from fdt\n"); + pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__); } iounmap(hcd->regs); @@ -212,7 +212,7 @@ static int ohci_hcd_ppc_of_shutdown(struct of_device *op) } -static struct of_device_id ohci_hcd_ppc_of_match[] = { +static const struct of_device_id ohci_hcd_ppc_of_match[] = { #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE { .name = "usb", diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index cd3398b675b2..89e670e38c10 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -41,14 +41,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { - pr_debug(__FILE__ ": no irq\n"); + pr_debug("%s: no irq\n", __FILE__); return -ENODEV; } irq = res->start; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - pr_debug(__FILE__ ": no reg addr\n"); + pr_debug("%s: no reg addr\n", __FILE__); return -ENODEV; } @@ -59,14 +59,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, hcd->rsrc_len = res->end - res->start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug(__FILE__ ": request_mem_region failed\n"); + pr_debug("%s: request_mem_region failed\n", __FILE__); retval = -EBUSY; goto err1; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - pr_debug(__FILE__ ": ioremap failed\n"); + pr_debug("%s: ioremap failed\n", __FILE__); retval = -ENOMEM; goto err2; } diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index e4bbe8e188e4..d8eb3bdafabb 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -31,8 +31,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev) { unsigned int usb_rst = 0; - printk(KERN_DEBUG __FILE__ - ": starting SA-1111 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", + __FILE__); #ifdef CONFIG_SA1100_BADGE4 if (machine_is_badge4()) { @@ -65,8 +65,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev) static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG __FILE__ - ": stopping SA-1111 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", + __FILE__); /* * Put the USB host controller into reset. diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5b22a4d1c9e4..e11cc3aa4b82 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -51,6 +51,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/byteorder.h> +#include <asm/unaligned.h> #include "../core/hcd.h" #include "sl811.h" @@ -1272,12 +1273,12 @@ sl811h_hub_control( sl811h_hub_descriptor(sl811, (struct usb_hub_descriptor *) buf); break; case GetHubStatus: - *(__le32 *) buf = cpu_to_le32(0); + put_unaligned_le32(0, buf); break; case GetPortStatus: if (wIndex != 1) goto error; - *(__le32 *) buf = cpu_to_le32(sl811->port1); + put_unaligned_le32(sl811->port1, buf); #ifndef VERBOSE if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 99cd00fd3514..09197067fe6b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -735,6 +735,7 @@ static void uhci_stop(struct usb_hcd *hcd) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); + synchronize_irq(hcd->irq); del_timer_sync(&uhci->fsbr_timer); release_uhci(uhci); diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 33128d52f212..105fa8b025bb 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -406,6 +406,25 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) } } +char *xhci_get_slot_state(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); + + switch (GET_SLOT_STATE(slot_ctx->dev_state)) { + case 0: + return "enabled/disabled"; + case 1: + return "default"; + case 2: + return "addressed"; + case 3: + return "configured"; + default: + return "reserved"; + } +} + void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index ecc131c3fe33..78c4edac1db1 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -101,12 +101,15 @@ static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset) next = readl(base + ext_offset); - if (ext_offset == XHCI_HCC_PARAMS_OFFSET) + if (ext_offset == XHCI_HCC_PARAMS_OFFSET) { /* Find the first extended capability */ next = XHCI_HCC_EXT_CAPS(next); - else + ext_offset = 0; + } else { /* Find the next extended capability */ next = XHCI_EXT_CAPS_NEXT(next); + } + if (!next) return 0; /* diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 5e92c72df642..4cb69e0af834 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1007,7 +1007,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * for usb_set_interface() and usb_set_configuration() claim). */ if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], - udev, ep, GFP_KERNEL) < 0) { + udev, ep, GFP_NOIO) < 0) { dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", __func__, ep->desc.bEndpointAddress); return -ENOMEM; @@ -1181,6 +1181,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, udev->slot_id); if (ret < 0) { + if (command) + list_del(&command->cmd_list); spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); return -ENOMEM; @@ -1264,30 +1266,13 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_zero_in_ctx(xhci, virt_dev); /* Install new rings and free or cache any old rings */ for (i = 1; i < 31; ++i) { - int rings_cached; - if (!virt_dev->eps[i].new_ring) continue; /* Only cache or free the old ring if it exists. * It may not if this is the first add of an endpoint. */ if (virt_dev->eps[i].ring) { - rings_cached = virt_dev->num_rings_cached; - if (rings_cached < XHCI_MAX_RINGS_CACHED) { - virt_dev->num_rings_cached++; - rings_cached = virt_dev->num_rings_cached; - virt_dev->ring_cache[rings_cached] = - virt_dev->eps[i].ring; - xhci_dbg(xhci, "Cached old ring, " - "%d ring%s cached\n", - rings_cached, - (rings_cached > 1) ? "s" : ""); - } else { - xhci_ring_free(xhci, virt_dev->eps[i].ring); - xhci_dbg(xhci, "Ring cache full (%d rings), " - "freeing ring\n", - virt_dev->num_rings_cached); - } + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; @@ -1458,6 +1443,131 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, } /* + * This submits a Reset Device Command, which will set the device state to 0, + * set the device address to 0, and disable all the endpoints except the default + * control endpoint. The USB core should come back and call + * xhci_address_device(), and then re-set up the configuration. If this is + * called because of a usb_reset_and_verify_device(), then the old alternate + * settings will be re-installed through the normal bandwidth allocation + * functions. + * + * Wait for the Reset Device command to finish. Remove all structures + * associated with the endpoints that were disabled. Clear the input device + * structure? Cache the rings? Reset the control endpoint 0 max packet size? + */ +int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + int ret, i; + unsigned long flags; + struct xhci_hcd *xhci; + unsigned int slot_id; + struct xhci_virt_device *virt_dev; + struct xhci_command *reset_device_cmd; + int timeleft; + int last_freed_endpoint; + + ret = xhci_check_args(hcd, udev, NULL, 0, __func__); + if (ret <= 0) + return ret; + xhci = hcd_to_xhci(hcd); + slot_id = udev->slot_id; + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) { + xhci_dbg(xhci, "%s called with invalid slot ID %u\n", + __func__, slot_id); + return -EINVAL; + } + + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); + /* Allocate the command structure that holds the struct completion. + * Assume we're in process context, since the normal device reset + * process has to wait for the device anyway. Storage devices are + * reset as part of error handling, so use GFP_NOIO instead of + * GFP_KERNEL. + */ + reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); + if (!reset_device_cmd) { + xhci_dbg(xhci, "Couldn't allocate command structure.\n"); + return -ENOMEM; + } + + /* Attempt to submit the Reset Device command to the command ring */ + spin_lock_irqsave(&xhci->lock, flags); + reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); + ret = xhci_queue_reset_device(xhci, slot_id); + if (ret) { + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + goto command_cleanup; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for the Reset Device command to finish */ + timeleft = wait_for_completion_interruptible_timeout( + reset_device_cmd->completion, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for reset device command\n", + timeleft == 0 ? "Timeout" : "Signal"); + spin_lock_irqsave(&xhci->lock, flags); + /* The timeout might have raced with the event ring handler, so + * only delete from the list if the item isn't poisoned. + */ + if (reset_device_cmd->cmd_list.next != LIST_POISON1) + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + ret = -ETIME; + goto command_cleanup; + } + + /* The Reset Device command can't fail, according to the 0.95/0.96 spec, + * unless we tried to reset a slot ID that wasn't enabled, + * or the device wasn't in the addressed or configured state. + */ + ret = reset_device_cmd->status; + switch (ret) { + case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ + case COMP_CTX_STATE: /* 0.96 completion code for same thing */ + xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n", + slot_id, + xhci_get_slot_state(xhci, virt_dev->out_ctx)); + xhci_info(xhci, "Not freeing device rings.\n"); + /* Don't treat this as an error. May change my mind later. */ + ret = 0; + goto command_cleanup; + case COMP_SUCCESS: + xhci_dbg(xhci, "Successful reset device command.\n"); + break; + default: + if (xhci_is_vendor_info_code(xhci, ret)) + break; + xhci_warn(xhci, "Unknown completion code %u for " + "reset device command.\n", ret); + ret = -EINVAL; + goto command_cleanup; + } + + /* Everything but endpoint 0 is disabled, so free or cache the rings. */ + last_freed_endpoint = 1; + for (i = 1; i < 31; ++i) { + if (!virt_dev->eps[i].ring) + continue; + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + last_freed_endpoint = i; + } + xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); + ret = 0; + +command_cleanup: + xhci_free_command(xhci, reset_device_cmd); + return ret; +} + +/* * At this point, the struct usb_device is about to go away, the device has * disconnected, and all traffic has been stopped and the endpoints have been * disabled. Free any HC data structures associated with that device. @@ -1694,7 +1804,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); return -EINVAL; } - config_cmd = xhci_alloc_command(xhci, true, mem_flags); + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); if (!config_cmd) { xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); return -ENOMEM; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index eac5b53aa9e7..208b805b80eb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -129,6 +129,50 @@ static u32 xhci_port_state_to_neutral(u32 state) return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); } +static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, + u32 __iomem *addr, u32 port_status) +{ + /* Write 1 to disable the port */ + xhci_writel(xhci, port_status | PORT_PE, addr); + port_status = xhci_readl(xhci, addr); + xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n", + wIndex, port_status); +} + +static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, + u16 wIndex, u32 __iomem *addr, u32 port_status) +{ + char *port_change_bit; + u32 status; + + switch (wValue) { + case USB_PORT_FEAT_C_RESET: + status = PORT_RC; + port_change_bit = "reset"; + break; + case USB_PORT_FEAT_C_CONNECTION: + status = PORT_CSC; + port_change_bit = "connect"; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + status = PORT_OCC; + port_change_bit = "over-current"; + break; + case USB_PORT_FEAT_C_ENABLE: + status = PORT_PEC; + port_change_bit = "enable/disable"; + break; + default: + /* Should never happen */ + return; + } + /* Change bits are all write 1 to clear */ + xhci_writel(xhci, port_status | status, addr); + port_status = xhci_readl(xhci, addr); + xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", + port_change_bit, wIndex, port_status); +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -138,7 +182,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u32 temp, status; int retval = 0; u32 __iomem *addr; - char *port_change_bit; ports = HCS_MAX_PORTS(xhci->hcs_params1); @@ -229,26 +272,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_C_RESET: - status = PORT_RC; - port_change_bit = "reset"; - break; case USB_PORT_FEAT_C_CONNECTION: - status = PORT_CSC; - port_change_bit = "connect"; - break; case USB_PORT_FEAT_C_OVER_CURRENT: - status = PORT_OCC; - port_change_bit = "over-current"; + case USB_PORT_FEAT_C_ENABLE: + xhci_clear_port_change_bit(xhci, wValue, wIndex, + addr, temp); + break; + case USB_PORT_FEAT_ENABLE: + xhci_disable_port(xhci, wIndex, addr, temp); break; default: goto error; } - /* Change bits are all write 1 to clear */ - xhci_writel(xhci, temp | status, addr); - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", - port_change_bit, wIndex, temp); - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ break; default: error: diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bffcef7a5545..49f7d72f8b1b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -198,6 +198,31 @@ fail: return 0; } +void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + unsigned int ep_index) +{ + int rings_cached; + + rings_cached = virt_dev->num_rings_cached; + if (rings_cached < XHCI_MAX_RINGS_CACHED) { + virt_dev->num_rings_cached++; + rings_cached = virt_dev->num_rings_cached; + virt_dev->ring_cache[rings_cached] = + virt_dev->eps[ep_index].ring; + xhci_dbg(xhci, "Cached old ring, " + "%d ring%s cached\n", + rings_cached, + (rings_cached > 1) ? "s" : ""); + } else { + xhci_ring_free(xhci, virt_dev->eps[ep_index].ring); + xhci_dbg(xhci, "Ring cache full (%d rings), " + "freeing ring\n", + virt_dev->num_rings_cached); + } + virt_dev->eps[ep_index].ring = NULL; +} + /* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue * pointers to the beginning of the ring. */ @@ -242,6 +267,8 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, void xhci_free_container_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { + if (!ctx) + return; dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma); kfree(ctx); } @@ -427,7 +454,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud case USB_SPEED_LOW: slot_ctx->dev_info |= (u32) SLOT_SPEED_LS; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); return -EINVAL; break; @@ -471,7 +498,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud case USB_SPEED_LOW: ep0_ctx->ep_info2 |= MAX_PACKET(8); break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); return -EINVAL; break; @@ -819,7 +846,8 @@ static void scratchpad_free(struct xhci_hcd *xhci) } struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, - bool allocate_completion, gfp_t mem_flags) + bool allocate_in_ctx, bool allocate_completion, + gfp_t mem_flags) { struct xhci_command *command; @@ -827,11 +855,14 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, if (!command) return NULL; - command->in_ctx = - xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, mem_flags); - if (!command->in_ctx) { - kfree(command); - return NULL; + if (allocate_in_ctx) { + command->in_ctx = + xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, + mem_flags); + if (!command->in_ctx) { + kfree(command); + return NULL; + } } if (allocate_completion) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index e097008d6fb1..417d37aff8d7 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -139,6 +139,7 @@ static const struct hc_driver xhci_pci_hc_driver = { .reset_bandwidth = xhci_reset_bandwidth, .address_device = xhci_address_device, .update_hub_device = xhci_update_hub_device, + .reset_device = xhci_reset_device, /* * scheduling support diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ee7bc7ecbc59..6ba841bca4a2 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -953,6 +953,17 @@ bandwidth_change: case TRB_TYPE(TRB_RESET_EP): handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); break; + case TRB_TYPE(TRB_RESET_DEV): + xhci_dbg(xhci, "Completed reset device command.\n"); + slot_id = TRB_TO_SLOT_ID( + xhci->cmd_ring->dequeue->generic.field[3]); + virt_dev = xhci->devs[slot_id]; + if (virt_dev) + handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); + else + xhci_warn(xhci, "Reset device command completion " + "for disabled slot %u\n", slot_id); + break; default: /* Skip over unknown commands on the event ring */ xhci->error_bitmask |= 1 << 6; @@ -1080,6 +1091,20 @@ static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci, return 0; } +int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code) +{ + if (trb_comp_code >= 224 && trb_comp_code <= 255) { + /* Vendor defined "informational" completion code, + * treat as not-an-error. + */ + xhci_dbg(xhci, "Vendor defined info completion code %u\n", + trb_comp_code); + xhci_dbg(xhci, "Treating code as success.\n"); + return 1; + } + return 0; +} + /* * If this function returns an error condition, it means it got a Transfer * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. @@ -1196,13 +1221,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, status = -ENOSR; break; default: - if (trb_comp_code >= 224 && trb_comp_code <= 255) { - /* Vendor defined "informational" completion code, - * treat as not-an-error. - */ - xhci_dbg(xhci, "Vendor defined info completion code %u\n", - trb_comp_code); - xhci_dbg(xhci, "Treating code as success.\n"); + if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { status = 0; break; } @@ -2181,6 +2200,14 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, false); } +/* Queue a reset device command TRB */ +int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id) +{ + return queue_command(xhci, 0, 0, 0, + TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id), + false); +} + /* Queue a configure endpoint command TRB */ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 877813505ef2..e5eb09b2f38e 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1210,6 +1210,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); +char *xhci_get_slot_state(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx); /* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); @@ -1233,8 +1235,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, struct usb_host_endpoint *ep, gfp_t mem_flags); void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); +void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + unsigned int ep_index); struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, - bool allocate_completion, gfp_t mem_flags); + bool allocate_in_ctx, bool allocate_completion, + gfp_t mem_flags); void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); @@ -1264,6 +1270,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); +int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev); int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); @@ -1272,6 +1279,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, union xhci_trb *start_trb, union xhci_trb *end_trb, dma_addr_t suspect_dma); +int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); void *xhci_setup_one_noop(struct xhci_hcd *xhci); void xhci_handle_event(struct xhci_hcd *xhci); @@ -1293,6 +1301,7 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); +int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_td *cur_td, struct xhci_dequeue_state *state); diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index eca355dccf65..e192e8f7c560 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -967,7 +967,7 @@ static const struct file_operations mdc800_device_ops = -static struct usb_device_id mdc800_table [] = { +static const struct usb_device_id mdc800_table[] = { { USB_DEVICE(MDC800_VENDOR_ID, MDC800_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 459a7287fe01..3a6bcd5fee09 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -155,7 +155,7 @@ static int mts_usb_probe(struct usb_interface *intf, const struct usb_device_id *id); static void mts_usb_disconnect(struct usb_interface *intf); -static struct usb_device_id mts_usb_ids []; +static const struct usb_device_id mts_usb_ids[]; static struct usb_driver mts_usb_driver = { .name = "microtekX6", @@ -656,7 +656,7 @@ static struct scsi_host_template mts_scsi_host_template = { /* The entries of microtek_table must correspond, line-by-line to the entries of mts_supported_products[]. */ -static struct usb_device_id mts_usb_ids [] = +static const struct usb_device_id mts_usb_ids[] = { { USB_DEVICE(0x4ce, 0x0300) }, { USB_DEVICE(0x5da, 0x0094) }, diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index abe3aa67ed00..55660eaf947c 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -87,17 +87,6 @@ config USB_LCD To compile this driver as a module, choose M here: the module will be called usblcd. -config USB_BERRY_CHARGE - tristate "USB BlackBerry recharge support" - depends on USB - help - Say Y here if you want to connect a BlackBerry device to your - computer's USB port and have it automatically switch to "recharge" - mode. - - To compile this driver as a module, choose M here: the - module will be called berry_charge. - config USB_LED tristate "USB LED driver support" depends on USB @@ -242,17 +231,3 @@ config USB_ISIGHTFW driver beforehand. Tools for doing so are available at http://bersace03.free.fr -config USB_VST - tristate "USB VST driver" - depends on USB - help - This driver is intended for Vernier Software Technologies - bulk usb devices such as their Ocean-Optics spectrometers or - Labquest. - It is a bulk channel driver with configurable read and write - timeouts. - - To compile this driver as a module, choose M here: the - module will be called vstusb. - - diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 0826aab8303f..717703e81425 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_USB_ADUTUX) += adutux.o obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o -obj-$(CONFIG_USB_BERRY_CHARGE) += berry_charge.o obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o @@ -23,7 +22,6 @@ obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o -obj-$(CONFIG_USB_VST) += vstusb.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 203526542013..d240de097c62 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -38,7 +38,7 @@ static int debug = 1; #define dbg(lvl, format, arg...) \ do { \ if (debug >= lvl) \ - printk(KERN_DEBUG __FILE__ " : " format " \n", ## arg); \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ } while (0) @@ -56,7 +56,7 @@ MODULE_PARM_DESC(debug, "Debug enabled or not"); #define ADU_PRODUCT_ID 0x0064 /* table of devices that work with this driver */ -static struct usb_device_id device_table [] = { +static const struct usb_device_id device_table[] = { { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */ @@ -132,8 +132,8 @@ static void adu_debug_data(int level, const char *function, int size, if (debug < level) return; - printk(KERN_DEBUG __FILE__": %s - length = %d, data = ", - function, size); + printk(KERN_DEBUG "%s: %s - length = %d, data = ", + __FILE__, function, size); for (i = 0; i < size; ++i) printk("%.2x ", data[i]); printk("\n"); diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1eb9e4162cc6..4d2952f1fb13 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -57,7 +57,7 @@ .bInterfaceProtocol = 0x00 /* table of devices that work with this driver */ -static struct usb_device_id appledisplay_table [] = { +static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, @@ -179,7 +179,7 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) return pdata->msgdata[1]; } -static struct backlight_ops appledisplay_bl_data = { +static const struct backlight_ops appledisplay_bl_data = { .get_brightness = appledisplay_bl_get_brightness, .update_status = appledisplay_bl_update_status, }; @@ -283,6 +283,7 @@ static int appledisplay_probe(struct usb_interface *iface, &appledisplay_bl_data); if (IS_ERR(pdata->bd)) { dev_err(&iface->dev, "Backlight registration failed\n"); + retval = PTR_ERR(pdata->bd); goto error; } diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c deleted file mode 100644 index c05a85bc5925..000000000000 --- a/drivers/usb/misc/berry_charge.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * USB BlackBerry charging module - * - * Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * Information on how to switch configs was taken by the bcharge.cc file - * created by the barry.sf.net project. - * - * bcharge.cc has the following copyright: - * Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/) - * and is released under the GPLv2. - * - * - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/usb.h> - -#define RIM_VENDOR 0x0fca -#define BLACKBERRY 0x0001 -#define BLACKBERRY_PEARL_DUAL 0x0004 -#define BLACKBERRY_PEARL 0x0006 - -static int debug; -static int pearl_dual_mode = 1; - -#ifdef dbg -#undef dbg -#endif -#define dbg(dev, format, arg...) \ - if (debug) \ - dev_printk(KERN_DEBUG , dev , format , ## arg) - -static struct usb_device_id id_table [] = { - { USB_DEVICE(RIM_VENDOR, BLACKBERRY) }, - { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) }, - { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) }, - { }, /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static int magic_charge(struct usb_device *udev) -{ - char *dummy_buffer = kzalloc(2, GFP_KERNEL); - int retval; - - if (!dummy_buffer) - return -ENOMEM; - - /* send two magic commands and then set the configuration. The device - * will then reset itself with the new power usage and should start - * charging. */ - - /* Note, with testing, it only seems that the first message is really - * needed (at least for the 8700c), but to be safe, we emulate what - * other operating systems seem to be sending to their device. We - * really need to get some specs for this device to be sure about what - * is going on here. - */ - dbg(&udev->dev, "Sending first magic command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100); - if (retval != 2) { - dev_err(&udev->dev, "First magic command failed: %d.\n", - retval); - goto exit; - } - - dbg(&udev->dev, "Sending second magic command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa2, 0x40, 0, 1, dummy_buffer, 0, 100); - if (retval != 0) { - dev_err(&udev->dev, "Second magic command failed: %d.\n", - retval); - goto exit; - } - - dbg(&udev->dev, "Calling set_configuration\n"); - retval = usb_driver_set_configuration(udev, 1); - if (retval) - dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval); - -exit: - kfree(dummy_buffer); - return retval; -} - -static int magic_dual_mode(struct usb_device *udev) -{ - char *dummy_buffer = kzalloc(2, GFP_KERNEL); - int retval; - - if (!dummy_buffer) - return -ENOMEM; - - /* send magic command so that the Blackberry Pearl device exposes - * two interfaces: both the USB mass-storage one and one which can - * be used for database access. */ - dbg(&udev->dev, "Sending magic pearl command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100); - dbg(&udev->dev, "Magic pearl command returned %d\n", retval); - - dbg(&udev->dev, "Calling set_configuration\n"); - retval = usb_driver_set_configuration(udev, 1); - if (retval) - dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval); - - kfree(dummy_buffer); - return retval; -} - -static int berry_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - - if (udev->bus_mA < 500) { - dbg(&udev->dev, "Not enough power to charge available\n"); - return -ENODEV; - } - - dbg(&udev->dev, "Power is set to %dmA\n", - udev->actconfig->desc.bMaxPower * 2); - - /* check the power usage so we don't try to enable something that is - * already enabled */ - if ((udev->actconfig->desc.bMaxPower * 2) == 500) { - dbg(&udev->dev, "device is already charging, power is " - "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2); - return -ENODEV; - } - - /* turn the power on */ - magic_charge(udev); - - if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) && - (pearl_dual_mode)) - magic_dual_mode(udev); - - /* we don't really want to bind to the device, userspace programs can - * handle the syncing just fine, so get outta here. */ - return -ENODEV; -} - -static void berry_disconnect(struct usb_interface *intf) -{ -} - -static struct usb_driver berry_driver = { - .name = "berry_charge", - .probe = berry_probe, - .disconnect = berry_disconnect, - .id_table = id_table, -}; - -static int __init berry_init(void) -{ - return usb_register(&berry_driver); -} - -static void __exit berry_exit(void) -{ - usb_deregister(&berry_driver); -} - -module_init(berry_init); -module_exit(berry_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode"); diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 5720bfef6a38..1547d8cac5fb 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -56,7 +56,7 @@ /* table of devices that work with this driver */ -static struct usb_device_id cypress_table [] = { +static const struct usb_device_id cypress_table[] = { { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index 4fb3c38b924b..b9cbbbda8245 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -27,7 +27,7 @@ #define USB_SKEL_VENDOR_ID 0x04b4 #define USB_SKEL_PRODUCT_ID 0x0002 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 879a980ca8c4..a6521c95f683 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -245,7 +245,7 @@ wraperr: return err; } -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, { } /* Terminating entry */ diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 59860b328534..fc15ad4c3139 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -259,7 +259,7 @@ wraperr: return err; } -static __devinitdata struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] __devinitconst = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 9d0675ed0d4c..1edb6d361896 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -86,7 +86,7 @@ static struct list_head ftdi_static_list; #define USB_FTDI_ELAN_VENDOR_ID 0x0403 #define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea /* table of devices that work with this driver*/ -static struct usb_device_id ftdi_elan_table[] = { +static const struct usb_device_id ftdi_elan_table[] = { {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)}, { /* Terminating entry */ } }; @@ -623,9 +623,12 @@ static void ftdi_elan_status_work(struct work_struct *work) */ static int ftdi_elan_open(struct inode *inode, struct file *file) { - int subminor = iminor(inode); - struct usb_interface *interface = usb_find_interface(&ftdi_elan_driver, - subminor); + int subminor; + struct usb_interface *interface; + + subminor = iminor(inode); + interface = usb_find_interface(&ftdi_elan_driver, subminor); + if (!interface) { printk(KERN_ERR "can't find device for minor %d\n", subminor); return -ENODEV; diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 1337a9ce80b9..a54c3cb804ce 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -48,7 +48,7 @@ #define ID_CHERRY 0x0010 /* device ID table */ -static struct usb_device_id idmouse_table[] = { +static const struct usb_device_id idmouse_table[] = { {USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */ {USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board */ {} /* terminating null entry */ diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index e75bb87ee92b..d3c852363883 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -139,7 +139,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type, /* driver registration */ /*---------------------*/ /* table of devices that work with this driver */ -static struct usb_device_id iowarrior_ids[] = { +static const struct usb_device_id iowarrior_ids[] = { {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)}, {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)}, {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)}, @@ -602,10 +602,12 @@ static int iowarrior_open(struct inode *inode, struct file *file) dbg("%s", __func__); + lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { + unlock_kernel(); err("%s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -615,6 +617,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&iowarrior_open_disc_lock); + unlock_kernel(); return -ENODEV; } @@ -641,6 +644,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) out: mutex_unlock(&dev->mutex); + unlock_kernel(); return retval; } diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index b897f6554ecd..06e990adc6cd 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -26,7 +26,7 @@ #include <linux/errno.h> #include <linux/module.h> -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05ac, 0x8300)}, {}, }; @@ -112,6 +112,8 @@ out: return ret; } +MODULE_FIRMWARE("isight.fw"); + static void isight_firmware_disconnect(struct usb_interface *intf) { } diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 90f130126c10..dd41d8710043 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -69,7 +69,7 @@ #endif /* table of devices that work with this driver */ -static struct usb_device_id ld_usb_table [] = { +static const struct usb_device_id ld_usb_table[] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) }, @@ -798,7 +798,7 @@ static int __init ld_usb_init(void) /* register this driver with the USB subsystem */ retval = usb_register(&ld_usb_driver); if (retval) - err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval); + err("usb_register failed for the %s driver. Error number %d\n", __FILE__, retval); return retval; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index faa6d623de78..8547bf9e3175 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -95,8 +95,11 @@ /* Use our own dbg macro */ #undef dbg -#define dbg(lvl, format, arg...) do { if (debug >= lvl) printk(KERN_DEBUG __FILE__ ": " format "\n", ## arg); } while (0) - +#define dbg(lvl, format, arg...) \ +do { \ + if (debug >= lvl) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) /* Version Information */ #define DRIVER_VERSION "v0.96" @@ -192,7 +195,7 @@ struct tower_get_version_reply { /* table of devices that work with this driver */ -static struct usb_device_id tower_table [] = { +static const struct usb_device_id tower_table[] = { { USB_DEVICE(LEGO_USB_TOWER_VENDOR_ID, LEGO_USB_TOWER_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -302,7 +305,7 @@ static inline void lego_usb_tower_debug_data (int level, const char *function, i if (debug < level) return; - printk (KERN_DEBUG __FILE__": %s - length = %d, data = ", function, size); + printk (KERN_DEBUG "%s: %s - length = %d, data = ", __FILE__, function, size); for (i = 0; i < size; ++i) { printk ("%.2x ", data[i]); } @@ -1055,7 +1058,7 @@ static int __init lego_usb_tower_init(void) /* register this driver with the USB subsystem */ result = usb_register(&tower_driver); if (result < 0) { - err("usb_register failed for the "__FILE__" driver. Error number %d", result); + err("usb_register failed for the %s driver. Error number %d", __FILE__, result); retval = -1; goto exit; } diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 32d0199d0c32..a85771b1563d 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -78,10 +78,13 @@ static int open_rio(struct inode *inode, struct file *file) { struct rio_usb_data *rio = &rio_instance; + /* against disconnect() */ + lock_kernel(); mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { mutex_unlock(&(rio->lock)); + unlock_kernel(); return -EBUSY; } rio->isopen = 1; @@ -91,6 +94,7 @@ static int open_rio(struct inode *inode, struct file *file) mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); + unlock_kernel(); return 0; } @@ -115,7 +119,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) int retries; int retval=0; - lock_kernel(); mutex_lock(&(rio->lock)); /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { @@ -254,7 +257,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) err_out: mutex_unlock(&(rio->lock)); - unlock_kernel(); return retval; } @@ -489,6 +491,7 @@ static void disconnect_rio(struct usb_interface *intf) struct rio_usb_data *rio = usb_get_intfdata (intf); usb_set_intfdata (intf, NULL); + lock_kernel(); if (rio) { usb_deregister_dev(intf, &usb_rio_class); @@ -498,6 +501,7 @@ static void disconnect_rio(struct usb_interface *intf) /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; mutex_unlock(&(rio->lock)); + unlock_kernel(); return; } kfree(rio->ibuf); @@ -508,9 +512,10 @@ static void disconnect_rio(struct usb_interface *intf) rio->present = 0; mutex_unlock(&(rio->lock)); } + unlock_kernel(); } -static struct usb_device_id rio_table [] = { +static const struct usb_device_id rio_table[] = { { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 8b37a4b9839e..aae95a009bd5 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -250,7 +250,7 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, sisusb->urbstatus[index] |= SU_URB_BUSY; /* Submit URB */ - retval = usb_submit_urb(urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_KERNEL); /* If OK, and if timeout > 0, wait for completion */ if ((retval == 0) && timeout) { @@ -306,7 +306,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, urb->actual_length = 0; sisusb->completein = 0; - retval = usb_submit_urb(urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_KERNEL); if (retval == 0) { wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout); if (!sisusb->completein) { @@ -2416,21 +2416,28 @@ sisusb_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor = iminor(inode); - if (!(interface = usb_find_interface(&sisusb_driver, subminor))) + lock_kernel(); + if (!(interface = usb_find_interface(&sisusb_driver, subminor))) { + unlock_kernel(); return -ENODEV; + } - if (!(sisusb = usb_get_intfdata(interface))) + if (!(sisusb = usb_get_intfdata(interface))) { + unlock_kernel(); return -ENODEV; + } mutex_lock(&sisusb->lock); if (!sisusb->present || !sisusb->ready) { mutex_unlock(&sisusb->lock); + unlock_kernel(); return -ENODEV; } if (sisusb->isopen) { mutex_unlock(&sisusb->lock); + unlock_kernel(); return -EBUSY; } @@ -2439,11 +2446,13 @@ sisusb_open(struct inode *inode, struct file *file) if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n"); + unlock_kernel(); return -EIO; } } else { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n"); + unlock_kernel(); return -EIO; } } @@ -2456,6 +2465,7 @@ sisusb_open(struct inode *inode, struct file *file) file->private_data = sisusb; mutex_unlock(&sisusb->lock); + unlock_kernel(); return 0; } @@ -3238,7 +3248,7 @@ static void sisusb_disconnect(struct usb_interface *intf) kref_put(&sisusb->kref, sisusb_delete); } -static struct usb_device_id sisusb_table [] = { +static const struct usb_device_id sisusb_table[] = { { USB_DEVICE(0x0711, 0x0550) }, { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index 2e14102955c5..5da28eaee314 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -33,7 +33,7 @@ #define TRANCEVIBRATOR_VENDOR_ID 0x0b49 /* ASCII Corporation */ #define TRANCEVIBRATOR_PRODUCT_ID 0x064f /* Trance Vibrator */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 4fb120357c55..90aede90553e 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -30,7 +30,7 @@ #define IOCTL_GET_DRV_VERSION 2 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, }; @@ -74,10 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor, r; + lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { + unlock_kernel(); err ("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -87,6 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); + unlock_kernel(); return -ENODEV; } @@ -98,11 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file) r = usb_autopm_get_interface(interface); if (r < 0) { kref_put(&dev->kref, lcd_delete); + unlock_kernel(); return r; } /* save our object in the file's private structure */ file->private_data = dev; + unlock_kernel(); return 0; } diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 06cb71942dc7..63da2c3c838f 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -24,7 +24,7 @@ #define PRODUCT_ID 0x1223 /* table of devices that work with this driver */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 3db255537e79..a9555cb901a1 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -27,7 +27,7 @@ #define MAXLEN 6 /* table of devices that work with this driver */ -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 3dab0c0b196f..a21cce6f7403 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1580,10 +1580,6 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) return -ERESTARTSYS; /* FIXME: What if a system sleep starts while a test is running? */ - if (!intf->is_active) { - mutex_unlock(&dev->lock); - return -EHOSTUNREACH; - } /* some devices, like ez-usb default devices, need a non-default * altsetting to have any active endpoints. some tests change @@ -2101,7 +2097,7 @@ static struct usbtest_info generic_info = { #endif -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { /*-------------------------------------------------------------*/ diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 9a6c27a01793..f56fed53f2dd 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -770,7 +770,7 @@ static void uss720_disconnect(struct usb_interface *intf) } /* table of cables that work through this driver */ -static struct usb_device_id uss720_table [] = { +static const struct usb_device_id uss720_table[] = { { USB_DEVICE(0x047e, 0x1001) }, { USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0729, 0x1284) }, diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c deleted file mode 100644 index f26ea8dc1577..000000000000 --- a/drivers/usb/misc/vstusb.c +++ /dev/null @@ -1,783 +0,0 @@ -/***************************************************************************** - * File: drivers/usb/misc/vstusb.c - * - * Purpose: Support for the bulk USB Vernier Spectrophotometers - * - * Author: Johnnie Peters - * Axian Consulting - * Beaverton, OR, USA 97005 - * - * Modified by: EQware Engineering, Inc. - * Oregon City, OR, USA 97045 - * - * Copyright: 2007, 2008 - * Vernier Software & Technology - * Beaverton, OR, USA 97005 - * - * Web: www.vernier.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/uaccess.h> -#include <linux/usb.h> - -#include <linux/usb/vstusb.h> - -#define DRIVER_VERSION "VST USB Driver Version 1.5" -#define DRIVER_DESC "Vernier Software Technology Bulk USB Driver" - -#ifdef CONFIG_USB_DYNAMIC_MINORS - #define VSTUSB_MINOR_BASE 0 -#else - #define VSTUSB_MINOR_BASE 199 -#endif - -#define USB_VENDOR_OCEANOPTICS 0x2457 -#define USB_VENDOR_VERNIER 0x08F7 /* Vernier Software & Technology */ - -#define USB_PRODUCT_USB2000 0x1002 -#define USB_PRODUCT_ADC1000_FW 0x1003 /* firmware download (renumerates) */ -#define USB_PRODUCT_ADC1000 0x1004 -#define USB_PRODUCT_HR2000_FW 0x1009 /* firmware download (renumerates) */ -#define USB_PRODUCT_HR2000 0x100A -#define USB_PRODUCT_HR4000_FW 0x1011 /* firmware download (renumerates) */ -#define USB_PRODUCT_HR4000 0x1012 -#define USB_PRODUCT_USB650 0x1014 /* "Red Tide" */ -#define USB_PRODUCT_QE65000 0x1018 -#define USB_PRODUCT_USB4000 0x1022 -#define USB_PRODUCT_USB325 0x1024 /* "Vernier Spectrometer" */ - -#define USB_PRODUCT_LABPRO 0x0001 -#define USB_PRODUCT_LABQUEST 0x0005 - -#define VST_MAXBUFFER (64*1024) - -static struct usb_device_id id_table[] = { - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB2000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_HR4000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB650)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB4000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB325)}, - { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABQUEST)}, - { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABPRO)}, - {}, -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -struct vstusb_device { - struct kref kref; - struct mutex lock; - struct usb_device *usb_dev; - char present; - char isopen; - struct usb_anchor submitted; - int rd_pipe; - int rd_timeout_ms; - int wr_pipe; - int wr_timeout_ms; -}; -#define to_vst_dev(d) container_of(d, struct vstusb_device, kref) - -static struct usb_driver vstusb_driver; - -static void vstusb_delete(struct kref *kref) -{ - struct vstusb_device *vstdev = to_vst_dev(kref); - - usb_put_dev(vstdev->usb_dev); - kfree(vstdev); -} - -static int vstusb_open(struct inode *inode, struct file *file) -{ - struct vstusb_device *vstdev; - struct usb_interface *interface; - - interface = usb_find_interface(&vstusb_driver, iminor(inode)); - - if (!interface) { - printk(KERN_ERR KBUILD_MODNAME - ": %s - error, can't find device for minor %d\n", - __func__, iminor(inode)); - return -ENODEV; - } - - vstdev = usb_get_intfdata(interface); - - if (!vstdev) - return -ENODEV; - - /* lock this device */ - mutex_lock(&vstdev->lock); - - /* can only open one time */ - if ((!vstdev->present) || (vstdev->isopen)) { - mutex_unlock(&vstdev->lock); - return -EBUSY; - } - - /* increment our usage count */ - kref_get(&vstdev->kref); - - vstdev->isopen = 1; - - /* save device in the file's private structure */ - file->private_data = vstdev; - - dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__); - - mutex_unlock(&vstdev->lock); - - return 0; -} - -static int vstusb_release(struct inode *inode, struct file *file) -{ - struct vstusb_device *vstdev; - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - mutex_lock(&vstdev->lock); - - vstdev->isopen = 0; - - dev_dbg(&vstdev->usb_dev->dev, "%s: released\n", __func__); - - mutex_unlock(&vstdev->lock); - - kref_put(&vstdev->kref, vstusb_delete); - - return 0; -} - -static void usb_api_blocking_completion(struct urb *urb) -{ - struct completion *completeit = urb->context; - - complete(completeit); -} - -static int vstusb_fill_and_send_urb(struct urb *urb, - struct usb_device *usb_dev, - unsigned int pipe, void *data, - unsigned int len, struct completion *done) -{ - struct usb_host_endpoint *ep; - struct usb_host_endpoint **hostep; - unsigned int pipend; - - int status; - - hostep = usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out; - pipend = usb_pipeendpoint(pipe); - ep = hostep[pipend]; - - if (!ep || (len == 0)) - return -EINVAL; - - if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT) { - pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); - usb_fill_int_urb(urb, usb_dev, pipe, data, len, - (usb_complete_t)usb_api_blocking_completion, - NULL, ep->desc.bInterval); - } else - usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, - (usb_complete_t)usb_api_blocking_completion, - NULL); - - init_completion(done); - urb->context = done; - urb->actual_length = 0; - status = usb_submit_urb(urb, GFP_KERNEL); - - return status; -} - -static int vstusb_complete_urb(struct urb *urb, struct completion *done, - int timeout, int *actual_length) -{ - unsigned long expire; - int status; - - expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; - if (!wait_for_completion_interruptible_timeout(done, expire)) { - usb_kill_urb(urb); - status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status; - - dev_dbg(&urb->dev->dev, - "%s timed out on ep%d%s len=%d/%d, urb status = %d\n", - current->comm, - usb_pipeendpoint(urb->pipe), - usb_pipein(urb->pipe) ? "in" : "out", - urb->actual_length, - urb->transfer_buffer_length, - urb->status); - - } else { - if (signal_pending(current)) { - /* if really an error */ - if (urb->status && !((urb->status == -ENOENT) || - (urb->status == -ECONNRESET) || - (urb->status == -ESHUTDOWN))) { - status = -EINTR; - usb_kill_urb(urb); - } else { - status = 0; - } - - dev_dbg(&urb->dev->dev, - "%s: signal pending on ep%d%s len=%d/%d," - "urb status = %d\n", - current->comm, - usb_pipeendpoint(urb->pipe), - usb_pipein(urb->pipe) ? "in" : "out", - urb->actual_length, - urb->transfer_buffer_length, - urb->status); - - } else { - status = urb->status; - } - } - - if (actual_length) - *actual_length = urb->actual_length; - - return status; -} - -static ssize_t vstusb_read(struct file *file, char __user *buffer, - size_t count, loff_t *ppos) -{ - struct vstusb_device *vstdev; - int cnt = -1; - void *buf; - int retval = 0; - - struct urb *urb; - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - /* verify that we actually want to read some data */ - if ((count == 0) || (count > VST_MAXBUFFER)) - return -EINVAL; - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) - return -ERESTARTSYS; - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - printk(KERN_ERR KBUILD_MODNAME - ": %s: device not present\n", __func__); - return -ENODEV; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - pipe = usb_rcvbulkpipe(dev, vstdev->rd_pipe); - timeout = vstdev->rd_timeout_ms; - - buf = kmalloc(count, GFP_KERNEL); - if (buf == NULL) { - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - kfree(buf); - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } - - if (copy_to_user(buffer, buf, cnt)) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", __func__); - retval = -EFAULT; - } else { - retval = cnt; - dev_dbg(&dev->dev, "%s: read %d bytes from pipe %d\n", - __func__, cnt, pipe); - } - -exit: - usb_free_urb(urb); - kfree(buf); - return retval; -} - -static ssize_t vstusb_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct vstusb_device *vstdev; - int cnt = -1; - void *buf; - int retval = 0; - - struct urb *urb; - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - /* verify that we actually have some data to write */ - if ((count == 0) || (count > VST_MAXBUFFER)) - return retval; - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) - return -ERESTARTSYS; - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - printk(KERN_ERR KBUILD_MODNAME - ": %s: device not present\n", __func__); - return -ENODEV; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - pipe = usb_sndbulkpipe(dev, vstdev->wr_pipe); - timeout = vstdev->wr_timeout_ms; - - buf = kmalloc(count, GFP_KERNEL); - if (buf == NULL) { - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - kfree(buf); - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - if (copy_from_user(buf, buffer, count)) { - mutex_unlock(&vstdev->lock); - dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__); - retval = -EFAULT; - goto exit; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } else { - retval = cnt; - dev_dbg(&dev->dev, "%s: sent %d bytes to pipe %d\n", - __func__, cnt, pipe); - } - -exit: - usb_free_urb(urb); - kfree(buf); - return retval; -} - -static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int retval = 0; - int cnt = -1; - void __user *data = (void __user *)arg; - struct vstusb_args usb_data; - - struct vstusb_device *vstdev; - void *buffer = NULL; /* must be initialized. buffer is - * referenced on exit but not all - * ioctls allocate it */ - - struct urb *urb = NULL; /* must be initialized. urb is - * referenced on exit but not all - * ioctls allocate it */ - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (_IOC_TYPE(cmd) != VST_IOC_MAGIC) { - dev_warn(&vstdev->usb_dev->dev, - "%s: ioctl command %x, bad ioctl magic %x, " - "expected %x\n", __func__, cmd, - _IOC_TYPE(cmd), VST_IOC_MAGIC); - return -EINVAL; - } - - if (vstdev == NULL) - return -ENODEV; - - if (copy_from_user(&usb_data, data, sizeof(struct vstusb_args))) { - dev_err(&vstdev->usb_dev->dev, "%s: can't copy_from_user\n", - __func__); - return -EFAULT; - } - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) { - retval = -ERESTARTSYS; - goto exit; - } - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - dev_err(&vstdev->usb_dev->dev, "%s: device not present\n", - __func__); - retval = -ENODEV; - goto exit; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - - switch (cmd) { - - case IOCTL_VSTUSB_CONFIG_RW: - - vstdev->rd_pipe = usb_data.rd_pipe; - vstdev->rd_timeout_ms = usb_data.rd_timeout_ms; - vstdev->wr_pipe = usb_data.wr_pipe; - vstdev->wr_timeout_ms = usb_data.wr_timeout_ms; - - mutex_unlock(&vstdev->lock); - - dev_dbg(&dev->dev, "%s: setting pipes/timeouts, " - "rdpipe = %d, rdtimeout = %d, " - "wrpipe = %d, wrtimeout = %d\n", __func__, - vstdev->rd_pipe, vstdev->rd_timeout_ms, - vstdev->wr_pipe, vstdev->wr_timeout_ms); - break; - - case IOCTL_VSTUSB_SEND_PIPE: - - if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) { - mutex_unlock(&vstdev->lock); - retval = -EINVAL; - goto exit; - } - - buffer = kmalloc(usb_data.count, GFP_KERNEL); - if (buffer == NULL) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - timeout = usb_data.timeout_ms; - - pipe = usb_sndbulkpipe(dev, usb_data.pipe); - - if (copy_from_user(buffer, usb_data.buffer, usb_data.count)) { - dev_err(&dev->dev, "%s: can't copy_from_user\n", - __func__); - mutex_unlock(&vstdev->lock); - retval = -EFAULT; - goto exit; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, - usb_data.count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, - "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - } - - break; - case IOCTL_VSTUSB_RECV_PIPE: - - if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) { - mutex_unlock(&vstdev->lock); - retval = -EINVAL; - goto exit; - } - - buffer = kmalloc(usb_data.count, GFP_KERNEL); - if (buffer == NULL) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - timeout = usb_data.timeout_ms; - - pipe = usb_rcvbulkpipe(dev, usb_data.pipe); - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, - usb_data.count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, - "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } - - if (copy_to_user(usb_data.buffer, buffer, cnt)) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", - __func__); - retval = -EFAULT; - goto exit; - } - - usb_data.count = cnt; - if (copy_to_user(data, &usb_data, sizeof(struct vstusb_args))) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", - __func__); - retval = -EFAULT; - } else { - dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", - __func__, usb_data.count, usb_data.pipe); - } - - break; - - default: - mutex_unlock(&vstdev->lock); - dev_warn(&dev->dev, "ioctl_vstusb: invalid ioctl cmd %x\n", - cmd); - return -EINVAL; - break; - } -exit: - usb_free_urb(urb); - kfree(buffer); - return retval; -} - -static const struct file_operations vstusb_fops = { - .owner = THIS_MODULE, - .read = vstusb_read, - .write = vstusb_write, - .unlocked_ioctl = vstusb_ioctl, - .compat_ioctl = vstusb_ioctl, - .open = vstusb_open, - .release = vstusb_release, -}; - -static struct usb_class_driver usb_vstusb_class = { - .name = "usb/vstusb%d", - .fops = &vstusb_fops, - .minor_base = VSTUSB_MINOR_BASE, -}; - -static int vstusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct vstusb_device *vstdev; - int i; - int retval = 0; - - /* allocate memory for our device state and intialize it */ - - vstdev = kzalloc(sizeof(*vstdev), GFP_KERNEL); - if (vstdev == NULL) - return -ENOMEM; - - /* must do usb_get_dev() prior to kref_init() since the kref_put() - * release function will do a usb_put_dev() */ - usb_get_dev(dev); - kref_init(&vstdev->kref); - mutex_init(&vstdev->lock); - - i = dev->descriptor.bcdDevice; - - dev_dbg(&intf->dev, "Version %1d%1d.%1d%1d found at address %d\n", - (i & 0xF000) >> 12, (i & 0xF00) >> 8, - (i & 0xF0) >> 4, (i & 0xF), dev->devnum); - - vstdev->present = 1; - vstdev->isopen = 0; - vstdev->usb_dev = dev; - init_usb_anchor(&vstdev->submitted); - - usb_set_intfdata(intf, vstdev); - retval = usb_register_dev(intf, &usb_vstusb_class); - if (retval) { - dev_err(&intf->dev, - "%s: Not able to get a minor for this device.\n", - __func__); - usb_set_intfdata(intf, NULL); - kref_put(&vstdev->kref, vstusb_delete); - return retval; - } - - /* let the user know what node this device is now attached to */ - dev_info(&intf->dev, - "VST USB Device #%d now attached to major %d minor %d\n", - (intf->minor - VSTUSB_MINOR_BASE), USB_MAJOR, intf->minor); - - dev_info(&intf->dev, "%s, %s\n", DRIVER_DESC, DRIVER_VERSION); - - return retval; -} - -static void vstusb_disconnect(struct usb_interface *intf) -{ - struct vstusb_device *vstdev = usb_get_intfdata(intf); - - usb_deregister_dev(intf, &usb_vstusb_class); - usb_set_intfdata(intf, NULL); - - if (vstdev) { - - mutex_lock(&vstdev->lock); - vstdev->present = 0; - - usb_kill_anchored_urbs(&vstdev->submitted); - - mutex_unlock(&vstdev->lock); - - kref_put(&vstdev->kref, vstusb_delete); - } - -} - -static int vstusb_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct vstusb_device *vstdev = usb_get_intfdata(intf); - int time; - if (!vstdev) - return 0; - - mutex_lock(&vstdev->lock); - time = usb_wait_anchor_empty_timeout(&vstdev->submitted, 1000); - if (!time) - usb_kill_anchored_urbs(&vstdev->submitted); - mutex_unlock(&vstdev->lock); - - return 0; -} - -static int vstusb_resume(struct usb_interface *intf) -{ - return 0; -} - -static struct usb_driver vstusb_driver = { - .name = "vstusb", - .probe = vstusb_probe, - .disconnect = vstusb_disconnect, - .suspend = vstusb_suspend, - .resume = vstusb_resume, - .id_table = id_table, -}; - -static int __init vstusb_init(void) -{ - int rc; - - rc = usb_register(&vstusb_driver); - if (rc) - printk(KERN_ERR "%s: failed to register (%d)", __func__, rc); - - return rc; -} - -static void __exit vstusb_exit(void) -{ - usb_deregister(&vstusb_driver); -} - -module_init(vstusb_init); -module_exit(vstusb_exit); - -MODULE_AUTHOR("Dennis O'Brien/Stephen Ware"); -MODULE_DESCRIPTION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 385ec0520167..6dd44bc1f5ff 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -460,8 +460,8 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, char ev_type, int status) { const struct usb_endpoint_descriptor *epd = &urb->ep->desc; - unsigned long flags; struct timeval ts; + unsigned long flags; unsigned int urb_length; unsigned int offset; unsigned int length; @@ -600,10 +600,13 @@ static void mon_bin_complete(void *data, struct urb *urb, int status) static void mon_bin_error(void *data, struct urb *urb, int error) { struct mon_reader_bin *rp = data; + struct timeval ts; unsigned long flags; unsigned int offset; struct mon_bin_hdr *ep; + do_gettimeofday(&ts); + spin_lock_irqsave(&rp->b_lock, flags); offset = mon_buff_area_alloc(rp, PKT_SIZE); @@ -623,6 +626,8 @@ static void mon_bin_error(void *data, struct urb *urb, int error) ep->devnum = urb->dev->devnum; ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; + ep->ts_sec = ts.tv_sec; + ep->ts_usec = ts.tv_usec; ep->status = error; ep->flag_setup = '-'; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 047568ff223d..31c11888ec6a 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -180,7 +180,7 @@ static inline unsigned int mon_get_timestamp(void) unsigned int stamp; do_gettimeofday(&tval); - stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s. */ + stamp = tval.tv_sec & 0xFFF; /* 2^32 = 4294967296. Limit to 4096s. */ stamp = stamp * 1000000 + tval.tv_usec; return stamp; } @@ -273,12 +273,12 @@ static void mon_text_error(void *data, struct urb *urb, int error) ep->type = 'E'; ep->id = (unsigned long) urb; - ep->busnum = 0; + ep->busnum = urb->dev->bus->busnum; ep->devnum = urb->dev->devnum; ep->epnum = usb_endpoint_num(&urb->ep->desc); ep->xfertype = usb_endpoint_type(&urb->ep->desc); ep->is_in = usb_urb_dir_in(urb); - ep->tstamp = 0; + ep->tstamp = mon_get_timestamp(); ep->length = 0; ep->status = error; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index d9db86498022..b4c783c284ba 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -37,7 +37,7 @@ config USB_MUSB_SOC depends on USB_MUSB_HDRC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default y if (BF54x && !BF544) default y if (BF52x && !BF522 && !BF523) @@ -48,7 +48,7 @@ comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 comment "OMAP 343x high speed USB support" - depends on USB_MUSB_HDRC && ARCH_OMAP34XX + depends on USB_MUSB_HDRC && ARCH_OMAP3 comment "Blackfin high speed USB Support" depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) @@ -153,7 +153,7 @@ config MUSB_PIO_ONLY config USB_INVENTRA_DMA bool depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY - default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN + default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ad26e6569665..bcee1339d4fd 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -30,7 +30,6 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; prefetch((u8 *)src); @@ -42,15 +41,17 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); if (!ANOMALY_05000380 && epnum != 0) { - flush_dcache_range((unsigned int)src, - (unsigned int)(src + len)); + u16 dma_reg; + + flush_dcache_range((unsigned long)src, + (unsigned long)(src + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) src & 0xFFFF); + dma_reg = (u32)src; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + dma_reg = (u32)src >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); @@ -79,12 +80,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) SSYNC(); if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); + outsw_8((unsigned long)fifo, src, (len + 1) >> 1); else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - + outsw((unsigned long)fifo, src, (len + 1) >> 1); } } /* @@ -94,19 +92,19 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; if (ANOMALY_05000467 && epnum != 0) { + u16 dma_reg; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + invalidate_dcache_range((unsigned long)dst, + (unsigned long)(dst + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); + dma_reg = (u32)dst; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + dma_reg = (u32)dst >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index a44a450c860d..3c69a76ec392 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1191,8 +1191,13 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) bd = tx_ch->head; + /* + * If Head is null then this could mean that a abort interrupt + * that needs to be acknowledged. + */ if (NULL == bd) { DBG(1, "null BD\n"); + tx_ram->tx_complete = 0; continue; } @@ -1412,15 +1417,6 @@ static int cppi_channel_abort(struct dma_channel *channel) if (cppi_ch->transmit) { struct cppi_tx_stateram __iomem *tx_ram; - int enabled; - - /* mask interrupts raised to signal teardown complete. */ - enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG) - & (1 << cppi_ch->index); - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG, - (1 << cppi_ch->index)); - /* REVISIT put timeouts on these controller handshakes */ cppi_dump_tx(6, cppi_ch, " (teardown)"); @@ -1435,7 +1431,6 @@ static int cppi_channel_abort(struct dma_channel *channel) do { value = musb_readl(&tx_ram->tx_complete, 0); } while (0xFFFFFFFC != value); - musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC); /* FIXME clean up the transfer state ... here? * the completion routine should get called with @@ -1448,23 +1443,15 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* While we scrub the TX state RAM, ensure that we clean - * up any interrupt that's currently asserted: + /* * 1. Write to completion Ptr value 0x1(bit 0 set) * (write back mode) - * 2. Write to completion Ptr value 0x0(bit 0 cleared) - * (compare mode) - * Value written is compared(for bits 31:2) and when - * equal, interrupt is deasserted. + * 2. Wait for abort interrupt and then put the channel in + * compare mode by writing 1 to the tx_complete register. */ cppi_reset_tx(tx_ram, 1); - musb_writel(&tx_ram->tx_complete, 0, 0); - - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - + cppi_ch->head = 0; + musb_writel(&tx_ram->tx_complete, 0, 1); cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 66913811af5e..a883f9dd3f8a 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) /* NOTE: DaVinci shadows the Mentor IRQs. Don't manage them through * the Mentor registers (except for setup), use the TI ones and EOI. * - * Docs describe irq "vector" registers asociated with the CPPI and + * Docs describe irq "vector" registers associated with the CPPI and * USB EOI registers. These hold a bitmask corresponding to the * current IRQ, not an irq handler address. Would using those bits * resolve some of the races observed in this dispatch code?? diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5eb9318cff77..b4bbf8f2c238 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -557,6 +557,69 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, handled = IRQ_HANDLED; } + + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", + otg_state_string(musb), devctl, power); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; +#endif + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->gadget->b_hnp_enable; + if (musb->is_active) { +#ifdef CONFIG_USB_MUSB_OTG + musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); +#endif + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->host->b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + DBG(1, "REVISIT: SUSPEND as B_HOST\n"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } + } + if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); @@ -625,10 +688,61 @@ b_host: } #endif /* CONFIG_USB_MUSB_HDRC_HCD */ + if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { + DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", + otg_state_string(musb), + MUSB_MODE(musb), devctl); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; +#endif /* HOST */ +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + musb_to_hcd(musb)->self.is_b_host = 0; + musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ +#endif /* OTG */ +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; +#endif /* GADGET */ + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + otg_state_string(musb)); + break; + } + } + /* mentor saves a bit: bus reset and babble share the same irq. * only host sees babble; only peripheral sees bus reset. */ if (int_usb & MUSB_INTR_RESET) { + handled = IRQ_HANDLED; if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { /* * Looks like non-HS BABBLE can be ignored, but @@ -641,7 +755,7 @@ b_host: DBG(1, "BABBLE devctl: %02x\n", devctl); else { ERR("Stopping host session -- babble\n"); - musb_writeb(mbase, MUSB_DEVCTL, 0); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } } else if (is_peripheral_capable()) { DBG(1, "BUS RESET as %s\n", otg_state_string(musb)); @@ -686,29 +800,7 @@ b_host: otg_state_string(musb)); } } - - handled = IRQ_HANDLED; } - schedule_work(&musb->irq_work); - - return handled; -} - -/* - * Interrupt Service Routine to record USB "global" interrupts. - * Since these do not happen often and signify things of - * paramount importance, it seems OK to check them individually; - * the order of the tests is specified in the manual - * - * @param musb instance pointer - * @param int_usb register contents - * @param devctl - * @param power - */ -static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, - u8 devctl, u8 power) -{ - irqreturn_t handled = IRQ_NONE; #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or @@ -755,117 +847,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, } #endif - if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { - DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", - otg_state_string(musb), - MUSB_MODE(musb), devctl); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; -#endif /* HOST */ -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - musb_to_hcd(musb)->self.is_b_host = 0; - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ -#endif /* OTG */ -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; -#endif /* GADGET */ - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - otg_state_string(musb)); - break; - } - - schedule_work(&musb->irq_work); - } - - if (int_usb & MUSB_INTR_SUSPEND) { - DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", - otg_state_string(musb), devctl, power); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - break; -#endif - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->gadget->b_hnp_enable; - if (musb->is_active) { -#ifdef CONFIG_USB_MUSB_OTG - musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - DBG(1, "HNP: Setting timer for b_ase0_brst\n"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); -#endif - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->host->b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - DBG(1, "REVISIT: SUSPEND as B_HOST\n"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } - schedule_work(&musb->irq_work); - } - + schedule_work(&musb->irq_work); return handled; } @@ -1000,7 +982,7 @@ static void musb_shutdown(struct platform_device *pdev) * more than selecting one of a bunch of predefined configurations. */ #if defined(CONFIG_USB_TUSB6010) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) static ushort __initdata fifo_mode = 4; #else static ushort __initdata fifo_mode = 2; @@ -1095,6 +1077,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = { { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, }; +/* mode 5 - fits in 8KB */ +static struct fifo_cfg __initdata mode_5_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, +{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, +{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, +}; /* * configure a fifo; for non-shared endpoints, this may be called @@ -1210,6 +1222,10 @@ static int __init ep_config_from_table(struct musb *musb) cfg = mode_4_cfg; n = ARRAY_SIZE(mode_4_cfg); break; + case 5: + cfg = mode_5_cfg; + n = ARRAY_SIZE(mode_5_cfg); + break; } printk(KERN_DEBUG "%s: setup fifo_mode %d\n", @@ -1314,9 +1330,6 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; */ static int __init musb_core_init(u16 musb_type, struct musb *musb) { -#ifdef MUSB_AHB_ID - u32 data; -#endif u8 reg; char *type; char aInfo[90], aRevision[32], aDate[12]; @@ -1328,23 +1341,17 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) reg = musb_read_configdata(mbase); strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); - if (reg & MUSB_CONFIGDATA_DYNFIFO) + if (reg & MUSB_CONFIGDATA_DYNFIFO) { strcat(aInfo, ", dyn FIFOs"); + musb->dyn_fifo = true; + } if (reg & MUSB_CONFIGDATA_MPRXE) { strcat(aInfo, ", bulk combine"); -#ifdef C_MP_RX musb->bulk_combine = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_MPTXE) { strcat(aInfo, ", bulk split"); -#ifdef C_MP_TX musb->bulk_split = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_HBRXE) { strcat(aInfo, ", HB-ISO Rx"); @@ -1360,20 +1367,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); -#ifdef MUSB_AHB_ID - data = musb_readl(mbase, 0x404); - sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff), - (data >> 16) & 0xff, (data >> 24) & 0xff); - /* FIXME ID2 and ID3 are unused */ - data = musb_readl(mbase, 0x408); - printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data); - data = musb_readl(mbase, 0x40c); - printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data); - reg = musb_readb(mbase, 0x400); - musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC; -#else aDate[0] = 0; -#endif if (MUSB_CONTROLLER_MHDRC == musb_type) { musb->is_multipoint = 1; type = "M"; @@ -1404,21 +1398,10 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) musb->nr_endpoints = 1; musb->epmask = 1; - if (reg & MUSB_CONFIGDATA_DYNFIFO) { - if (musb->config->dyn_fifo) - status = ep_config_from_table(musb); - else { - ERR("reconfigure software for Dynamic FIFOs\n"); - status = -ENODEV; - } - } else { - if (!musb->config->dyn_fifo) - status = ep_config_from_hw(musb); - else { - ERR("reconfigure software for static FIFOs\n"); - return -ENODEV; - } - } + if (musb->dyn_fifo) + status = ep_config_from_table(musb); + else + status = ep_config_from_hw(musb); if (status < 0) return status; @@ -1587,11 +1570,6 @@ irqreturn_t musb_interrupt(struct musb *musb) ep_num++; } - /* finish handling "global" interrupts after handling fifos */ - if (musb->int_usb) - retval |= musb_stage2_irq(musb, - musb->int_usb, devctl, power); - return retval; } @@ -1696,7 +1674,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, unsigned long val; if (sscanf(buf, "%lu", &val) < 1) { - printk(KERN_ERR "Invalid VBUS timeout ms value\n"); + dev_err(dev, "Invalid VBUS timeout ms value\n"); return -EINVAL; } @@ -1746,7 +1724,7 @@ musb_srp_store(struct device *dev, struct device_attribute *attr, if (sscanf(buf, "%hu", &srp) != 1 || (srp != 1)) { - printk(KERN_ERR "SRP: Value must be 1\n"); + dev_err(dev, "SRP: Value must be 1\n"); return -EINVAL; } @@ -1759,6 +1737,19 @@ static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); #endif /* CONFIG_USB_GADGET_MUSB_HDRC */ +static struct attribute *musb_attributes[] = { + &dev_attr_mode.attr, + &dev_attr_vbus.attr, +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + &dev_attr_srp.attr, +#endif + NULL +}; + +static const struct attribute_group musb_attr_group = { + .attrs = musb_attributes, +}; + #endif /* sysfs */ /* Only used to provide driver mode change events */ @@ -1833,11 +1824,7 @@ static void musb_free(struct musb *musb) */ #ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif + sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif #ifdef CONFIG_USB_GADGET_MUSB_HDRC @@ -2017,22 +2004,10 @@ bad_config: musb->irq_wake = 0; } - pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n", - musb_driver_name, - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - /* host side needs more setup */ if (is_host_enabled(musb)) { struct usb_hcd *hcd = musb_to_hcd(musb); + u8 busctl; otg_set_host(musb->xceiv, &hcd->self); @@ -2040,6 +2015,13 @@ bad_config: hcd->self.otg_port = 1; musb->xceiv->host = &hcd->self; hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); + } } /* For the host-only role, we can activate right away. @@ -2079,26 +2061,26 @@ bad_config: } #ifdef CONFIG_SYSFS - status = device_create_file(dev, &dev_attr_mode); - status = device_create_file(dev, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - status = device_create_file(dev, &dev_attr_srp); -#endif /* CONFIG_USB_GADGET_MUSB_HDRC */ - status = 0; + status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); #endif if (status) goto fail2; + dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", + ({char *s; + switch (musb->board_mode) { + case MUSB_HOST: s = "Host"; break; + case MUSB_PERIPHERAL: s = "Peripheral"; break; + default: s = "OTG"; break; + }; s; }), + ctrl, + (is_dma_capable() && musb->dma_controller) + ? "DMA" : "PIO", + musb->nIrq); + return 0; fail2: -#ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif -#endif musb_platform_exit(musb); fail: dev_err(musb->controller, @@ -2127,6 +2109,7 @@ static int __init musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq(pdev, 0); + int status; struct resource *iomem; void __iomem *base; @@ -2134,7 +2117,7 @@ static int __init musb_probe(struct platform_device *pdev) if (!iomem || irq == 0) return -ENODEV; - base = ioremap(iomem->start, iomem->end - iomem->start + 1); + base = ioremap(iomem->start, resource_size(iomem)); if (!base) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; @@ -2144,7 +2127,12 @@ static int __init musb_probe(struct platform_device *pdev) /* clobbered by use_dma=n */ orig_dma_mask = dev->dma_mask; #endif - return musb_init_controller(dev, irq, base); + + status = musb_init_controller(dev, irq, base); + if (status < 0) + iounmap(base); + + return status; } static int __exit musb_remove(struct platform_device *pdev) @@ -2173,6 +2161,148 @@ static int __exit musb_remove(struct platform_device *pdev) #ifdef CONFIG_PM +static struct musb_context_registers musb_context; + +void musb_save_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + + if (is_host_enabled(musb)) { + musb_context.frame = musb_readw(musb_base, MUSB_FRAME); + musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + } + musb_context.power = musb_readb(musb_base, MUSB_POWER); + musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); + musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); + musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); + musb_context.index = musb_readb(musb_base, MUSB_INDEX); + musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_context.index_regs[i].txmaxp = + musb_readw(musb_base, 0x10 + MUSB_TXMAXP); + musb_context.index_regs[i].txcsr = + musb_readw(musb_base, 0x10 + MUSB_TXCSR); + musb_context.index_regs[i].rxmaxp = + musb_readw(musb_base, 0x10 + MUSB_RXMAXP); + musb_context.index_regs[i].rxcsr = + musb_readw(musb_base, 0x10 + MUSB_RXCSR); + + if (musb->dyn_fifo) { + musb_context.index_regs[i].txfifoadd = + musb_read_txfifoadd(musb_base); + musb_context.index_regs[i].rxfifoadd = + musb_read_rxfifoadd(musb_base); + musb_context.index_regs[i].txfifosz = + musb_read_txfifosz(musb_base); + musb_context.index_regs[i].rxfifosz = + musb_read_rxfifosz(musb_base); + } + if (is_host_enabled(musb)) { + musb_context.index_regs[i].txtype = + musb_readb(musb_base, 0x10 + MUSB_TXTYPE); + musb_context.index_regs[i].txinterval = + musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL); + musb_context.index_regs[i].rxtype = + musb_readb(musb_base, 0x10 + MUSB_RXTYPE); + musb_context.index_regs[i].rxinterval = + musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL); + + musb_context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb_context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb_context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb_context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb_context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb_context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); + + musb_platform_save_context(musb, &musb_context); +} + +void musb_restore_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + void __iomem *ep_target_regs; + + musb_platform_restore_context(musb, &musb_context); + + if (is_host_enabled(musb)) { + musb_writew(musb_base, MUSB_FRAME, musb_context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode); + } + musb_writeb(musb_base, MUSB_POWER, musb_context.power); + musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe); + musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe); + musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe); + musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_writew(musb_base, 0x10 + MUSB_TXMAXP, + musb_context.index_regs[i].txmaxp); + musb_writew(musb_base, 0x10 + MUSB_TXCSR, + musb_context.index_regs[i].txcsr); + musb_writew(musb_base, 0x10 + MUSB_RXMAXP, + musb_context.index_regs[i].rxmaxp); + musb_writew(musb_base, 0x10 + MUSB_RXCSR, + musb_context.index_regs[i].rxcsr); + + if (musb->dyn_fifo) { + musb_write_txfifosz(musb_base, + musb_context.index_regs[i].txfifosz); + musb_write_rxfifosz(musb_base, + musb_context.index_regs[i].rxfifosz); + musb_write_txfifoadd(musb_base, + musb_context.index_regs[i].txfifoadd); + musb_write_rxfifoadd(musb_base, + musb_context.index_regs[i].rxfifoadd); + } + + if (is_host_enabled(musb)) { + musb_writeb(musb_base, 0x10 + MUSB_TXTYPE, + musb_context.index_regs[i].txtype); + musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL, + musb_context.index_regs[i].txinterval); + musb_writeb(musb_base, 0x10 + MUSB_RXTYPE, + musb_context.index_regs[i].rxtype); + musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL, + + musb_context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, + musb_context.index_regs[i].txfunaddr); + musb_write_txhubaddr(musb_base, i, + musb_context.index_regs[i].txhubaddr); + musb_write_txhubport(musb_base, i, + musb_context.index_regs[i].txhubport); + + ep_target_regs = + musb_read_target_reg_base(i, musb_base); + + musb_write_rxfunaddr(ep_target_regs, + musb_context.index_regs[i].rxfunaddr); + musb_write_rxhubaddr(ep_target_regs, + musb_context.index_regs[i].rxhubaddr); + musb_write_rxhubport(ep_target_regs, + musb_context.index_regs[i].rxhubport); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); +} + static int musb_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -2194,6 +2324,8 @@ static int musb_suspend(struct device *dev) */ } + musb_save_context(musb); + if (musb->set_clock) musb->set_clock(musb->clock, 0); else @@ -2215,6 +2347,8 @@ static int musb_resume_noirq(struct device *dev) else clk_enable(musb->clock); + musb_restore_context(musb); + /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 03d50909b078..d849fb81c131 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -52,6 +52,15 @@ struct musb; struct musb_hw_ep; struct musb_ep; +/* Helper defines for struct musb->hwvers */ +#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) +#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) +#define MUSB_HWVERS_RC 0x8000 +#define MUSB_HWVERS_1300 0x52C +#define MUSB_HWVERS_1400 0x590 +#define MUSB_HWVERS_1800 0x720 +#define MUSB_HWVERS_1900 0x784 +#define MUSB_HWVERS_2000 0x800 #include "musb_debug.h" #include "musb_dma.h" @@ -322,13 +331,6 @@ struct musb { struct clk *clock; irqreturn_t (*isr)(int, void *); struct work_struct irq_work; -#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) -#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) -#define MUSB_HWVERS_RC 0x8000 -#define MUSB_HWVERS_1300 0x52C -#define MUSB_HWVERS_1400 0x590 -#define MUSB_HWVERS_1800 0x720 -#define MUSB_HWVERS_2000 0x800 u16 hwvers; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ @@ -411,22 +413,15 @@ struct musb { unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ + unsigned dyn_fifo:1; /* dynamic FIFO supported? */ -#ifdef C_MP_TX - unsigned bulk_split:1; + unsigned bulk_split:1; #define can_bulk_split(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#else -#define can_bulk_split(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#ifdef C_MP_RX - unsigned bulk_combine:1; + unsigned bulk_combine:1; #define can_bulk_combine(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) -#else -#define can_bulk_combine(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) #ifdef CONFIG_USB_GADGET_MUSB_HDRC /* is_suspended means USB B_PERIPHERAL suspend */ @@ -461,6 +456,45 @@ struct musb { #endif }; +#ifdef CONFIG_PM +struct musb_csr_regs { + /* FIFO registers */ + u16 txmaxp, txcsr, rxmaxp, rxcsr; + u16 rxfifoadd, txfifoadd; + u8 txtype, txinterval, rxtype, rxinterval; + u8 rxfifosz, txfifosz; + u8 txfunaddr, txhubaddr, txhubport; + u8 rxfunaddr, rxhubaddr, rxhubport; +}; + +struct musb_context_registers { + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) + u32 otg_sysconfig, otg_forcestandby; +#endif + u8 power; + u16 intrtxe, intrrxe; + u8 intrusbe; + u16 frame; + u8 index, testmode; + + u8 devctl, misc; + + struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; +}; + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) +extern void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context); +extern void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context); +#else +#define musb_platform_save_context(m, x) do {} while (0) +#define musb_platform_restore_context(m, x) do {} while (0) +#endif + +#endif + static inline void musb_set_vbus(struct musb *musb, int is_on) { musb->board_set_vbus(musb, is_on); @@ -562,7 +596,7 @@ extern void musb_hnp_stop(struct musb *musb); extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); #else #define musb_platform_try_idle(x, y) do {} while (0) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index cbcf14a236e6..a9f288cd70ed 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -895,7 +895,14 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_split(), use by updating "tmp"; * likewise high bandwidth periodic tx */ - musb_writew(regs, MUSB_TXMAXP, tmp); + /* Set TXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. Currently, It seems that double + * buffering has problem if musb RTL revision number < 2.0. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, tmp); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -925,7 +932,13 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_combine() use by updating "tmp" * likewise high bandwidth periodic rx */ - musb_writew(regs, MUSB_RXMAXP, tmp); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx); + else + musb_writew(regs, MUSB_RXMAXP, tmp); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { @@ -1697,8 +1710,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) return -EINVAL; /* driver must be initialized to support peripheral mode */ - if (!musb || !(musb->board_mode == MUSB_OTG - || musb->board_mode != MUSB_OTG)) { + if (!musb) { DBG(1, "%s, no dev??\n", __func__); return -ENODEV; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 74c4c3698f1e..3421cf9858b5 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -605,8 +605,14 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg); musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg); /* NOTE: bulk combining rewrites high bits of maxpacket */ - musb_writew(ep->regs, MUSB_RXMAXP, - qh->maxpacket | ((qh->hb_mult - 1) << 11)); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffer mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); + else + musb_writew(ep->regs, MUSB_RXMAXP, + qh->maxpacket | ((qh->hb_mult - 1) << 11)); ep->rx_reinit = 0; } @@ -1771,6 +1777,9 @@ static int musb_schedule( int best_end, epnum; struct musb_hw_ep *hw_ep = NULL; struct list_head *head = NULL; + u8 toggle; + u8 txtype; + struct urb *urb = next_urb(qh); /* use fixed hardware for control and bulk */ if (qh->type == USB_ENDPOINT_XFER_CONTROL) { @@ -1809,6 +1818,27 @@ static int musb_schedule( diff -= (qh->maxpacket * qh->hb_mult); if (diff >= 0 && best_diff > diff) { + + /* + * Mentor controller has a bug in that if we schedule + * a BULK Tx transfer on an endpoint that had earlier + * handled ISOC then the BULK transfer has to start on + * a zero toggle. If the BULK transfer starts on a 1 + * toggle then this transfer will fail as the mentor + * controller starts the Bulk transfer on a 0 toggle + * irrespective of the programming of the toggle bits + * in the TXCSR register. Check for this condition + * while allocating the EP for a Tx Bulk transfer. If + * so skip this EP. + */ + hw_ep = musb->endpoints + epnum; + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in); + txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE) + >> 4) & 0x3; + if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) && + toggle && (txtype == USB_ENDPOINT_XFER_ISOC)) + continue; + best_diff = diff; best_end = epnum; } diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 473a94ef905f..8d8062b10e2f 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -72,6 +72,10 @@ #define MUSB_DEVCTL_HR 0x02 #define MUSB_DEVCTL_SESSION 0x01 +/* MUSB ULPI VBUSCONTROL */ +#define MUSB_ULPI_USE_EXTVBUS 0x01 +#define MUSB_ULPI_USE_EXTVBUSIND 0x02 + /* TESTMODE */ #define MUSB_TEST_FORCE_HOST 0x80 #define MUSB_TEST_FIFO_ACCESS 0x40 @@ -246,6 +250,7 @@ /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */ #define MUSB_HWVERS 0x6C /* 8 bit */ +#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */ #define MUSB_EPINFO 0x78 /* 8 bit */ #define MUSB_RAMINFO 0x79 /* 8 bit */ @@ -321,6 +326,26 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) musb_writew(mbase, MUSB_RXFIFOADD, c_off); } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_TXFIFOSZ); +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_TXFIFOADD); +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_RXFIFOSZ); +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_RXFIFOADD); +} + static inline u8 musb_read_configdata(void __iomem *mbase) { musb_writeb(mbase, MUSB_INDEX, 0); @@ -376,6 +401,36 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, qh_h_port_reg); } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR)); +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR)); +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT)); +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR)); +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR)); +} + +static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT)); +} + #else /* CONFIG_BLACKFIN */ #define USB_BASE USB_FADDR @@ -436,7 +491,7 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset)) -/* Not implemented - HW has seperate Tx/Rx FIFO */ +/* Not implemented - HW has separate Tx/Rx FIFO */ #define MUSB_TXCSR_MODE 0x0000 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) @@ -455,6 +510,22 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) { } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ +} + static inline u8 musb_read_configdata(void __iomem *mbase) { return 0; @@ -462,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase) static inline u16 musb_read_hwvers(void __iomem *mbase) { - return 0; + /* + * This register is invisible on Blackfin, actually the MUSB + * RTL version of Blackfin is 1.9, so just harcode its value. + */ + return MUSB_HWVERS_1900; } static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) @@ -500,6 +575,30 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, { } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ +} + #endif /* CONFIG_BLACKFIN */ #endif /* __MUSB_REGS_H__ */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index a237550f91bf..2fa7d5c00f31 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -250,20 +250,39 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) u8 bchannel; u8 int_hsdma; - u32 addr; + u32 addr, count; u16 csr; spin_lock_irqsave(&musb->lock, flags); int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); - if (!int_hsdma) - goto done; #ifdef CONFIG_BLACKFIN /* Clear DMA interrupt flags */ musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); #endif + if (!int_hsdma) { + DBG(2, "spurious DMA irq\n"); + + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { + musb_channel = (struct musb_dma_channel *) + &(controller->channel[bchannel]); + channel = &musb_channel->channel; + if (channel->status == MUSB_DMA_STATUS_BUSY) { + count = musb_read_hsdma_count(mbase, bchannel); + + if (count == 0) + int_hsdma |= (1 << bchannel); + } + } + + DBG(2, "int_hsdma = 0x%x\n", int_hsdma); + + if (!int_hsdma) + goto done; + } + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { if (int_hsdma & (1 << bchannel)) { musb_channel = (struct musb_dma_channel *) diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index 1299d92dc83f..613f95a058f7 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -55,6 +55,10 @@ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ addr) +#define musb_read_hsdma_count(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) + #define musb_write_hsdma_count(mbase, bchannel, len) \ musb_writel(mbase, \ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ @@ -96,6 +100,19 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); } +static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) +{ + u32 count = musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; +} + static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 83beeac5e7bf..3fe16867b5a8 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -220,7 +220,7 @@ int __init musb_platform_init(struct musb *musb) musb_platform_resume(musb); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ l &= ~NOSTDBY; /* remove possible nostdby */ l |= SMARTSTDBY; /* enable smart standby */ @@ -233,17 +233,19 @@ int __init musb_platform_init(struct musb *musb) */ if (!cpu_is_omap3430()) l |= AUTOIDLE; /* enable auto idle */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_INTERFSEL); + l = musb_readl(musb->mregs, OTG_INTERFSEL); l |= ULPI_12PIN; - omap_writel(l, OTG_INTERFSEL); + musb_writel(musb->mregs, OTG_INTERFSEL, l); pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", - omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG), - omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL), - omap_readl(OTG_SIMENABLE)); + musb_readl(musb->mregs, OTG_REVISION), + musb_readl(musb->mregs, OTG_SYSCONFIG), + musb_readl(musb->mregs, OTG_SYSSTATUS), + musb_readl(musb->mregs, OTG_INTERFSEL), + musb_readl(musb->mregs, OTG_SIMENABLE)); omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1); @@ -255,6 +257,22 @@ int __init musb_platform_init(struct musb *musb) return 0; } +#ifdef CONFIG_PM +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG); + musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY); +} + +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig); + musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby); +} +#endif + int musb_platform_suspend(struct musb *musb) { u32 l; @@ -263,13 +281,13 @@ int musb_platform_suspend(struct musb *musb) return 0; /* in any role */ - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l |= ENABLEFORCE; /* enable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l |= ENABLEWAKEUP; /* enable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); otg_set_suspend(musb->xceiv, 1); @@ -295,13 +313,13 @@ static int musb_platform_resume(struct musb *musb) else clk_enable(musb->clock); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l &= ~ENABLEFORCE; /* disable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); return 0; } diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index fbede7798aed..40b3c02ae9f0 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -10,47 +10,43 @@ #ifndef __MUSB_OMAP243X_H__ #define __MUSB_OMAP243X_H__ -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include <mach/hardware.h> #include <plat/usb.h> /* * OMAP2430-specific definitions */ -#define MENTOR_BASE_OFFSET 0 -#if defined(CONFIG_ARCH_OMAP2430) -#define OMAP_HSOTG_BASE (OMAP243X_HS_BASE) -#elif defined(CONFIG_ARCH_OMAP3430) -#define OMAP_HSOTG_BASE (OMAP34XX_HSUSB_OTG_BASE) -#endif -#define OMAP_HSOTG(offset) (OMAP_HSOTG_BASE + 0x400 + (offset)) -#define OTG_REVISION OMAP_HSOTG(0x0) -#define OTG_SYSCONFIG OMAP_HSOTG(0x4) +#define OTG_REVISION 0x400 + +#define OTG_SYSCONFIG 0x404 # define MIDLEMODE 12 /* bit position */ # define FORCESTDBY (0 << MIDLEMODE) # define NOSTDBY (1 << MIDLEMODE) # define SMARTSTDBY (2 << MIDLEMODE) + # define SIDLEMODE 3 /* bit position */ # define FORCEIDLE (0 << SIDLEMODE) # define NOIDLE (1 << SIDLEMODE) # define SMARTIDLE (2 << SIDLEMODE) + # define ENABLEWAKEUP (1 << 2) # define SOFTRST (1 << 1) # define AUTOIDLE (1 << 0) -#define OTG_SYSSTATUS OMAP_HSOTG(0x8) + +#define OTG_SYSSTATUS 0x408 # define RESETDONE (1 << 0) -#define OTG_INTERFSEL OMAP_HSOTG(0xc) + +#define OTG_INTERFSEL 0x40c # define EXTCP (1 << 2) -# define PHYSEL 0 /* bit position */ +# define PHYSEL 0 /* bit position */ # define UTMI_8BIT (0 << PHYSEL) # define ULPI_12PIN (1 << PHYSEL) # define ULPI_8PIN (2 << PHYSEL) -#define OTG_SIMENABLE OMAP_HSOTG(0x10) + +#define OTG_SIMENABLE 0x410 # define TM1 (1 << 0) -#define OTG_FORCESTDBY OMAP_HSOTG(0x14) -# define ENABLEFORCE (1 << 0) -#endif /* CONFIG_ARCH_OMAP2430 */ +#define OTG_FORCESTDBY 0x414 +# define ENABLEFORCE (1 << 0) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 88b587c703e9..ab776a8d98ca 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1118,7 +1118,7 @@ int __init musb_platform_init(struct musb *musb) } musb->sync = mem->start; - sync = ioremap(mem->start, mem->end - mem->start + 1); + sync = ioremap(mem->start, resource_size(mem)); if (!sync) { pr_debug("ioremap for sync failed\n"); ret = -ENOMEM; diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index e13c77052e5e..1c868096bd6f 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -648,7 +648,7 @@ void dma_controller_destroy(struct dma_controller *c) } } - if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0) + if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0) omap_free_dma(tusb_dma->ch); kfree(tusb_dma); diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 2be9f2fa41f9..3e4e9f434d78 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -36,7 +36,7 @@ #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> - +#include <linux/notifier.h> /* Register defines */ @@ -236,15 +236,6 @@ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) - - -enum linkstat { - USB_LINK_UNKNOWN = 0, - USB_LINK_NONE, - USB_LINK_VBUS, - USB_LINK_ID, -}; - struct twl4030_usb { struct otg_transceiver otg; struct device *dev; @@ -347,10 +338,10 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) /*-------------------------------------------------------------------------*/ -static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) +static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl) { int status; - int linkstat = USB_LINK_UNKNOWN; + int linkstat = USB_EVENT_NONE; /* * For ID/VBUS sensing, see manual section 15.4.8 ... @@ -368,11 +359,11 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) dev_err(twl->dev, "USB link status err %d\n", status); else if (status & (BIT(7) | BIT(2))) { if (status & BIT(2)) - linkstat = USB_LINK_ID; + linkstat = USB_EVENT_ID; else - linkstat = USB_LINK_VBUS; + linkstat = USB_EVENT_VBUS; } else - linkstat = USB_LINK_NONE; + linkstat = USB_EVENT_NONE; dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", status, status, linkstat); @@ -383,7 +374,7 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) spin_lock_irq(&twl->lock); twl->linkstat = linkstat; - if (linkstat == USB_LINK_ID) { + if (linkstat == USB_EVENT_ID) { twl->otg.default_a = true; twl->otg.state = OTG_STATE_A_IDLE; } else { @@ -564,7 +555,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev, spin_lock_irqsave(&twl->lock, flags); ret = sprintf(buf, "%s\n", - (twl->linkstat == USB_LINK_VBUS) ? "on" : "off"); + (twl->linkstat == USB_EVENT_VBUS) ? "on" : "off"); spin_unlock_irqrestore(&twl->lock, flags); return ret; @@ -576,17 +567,8 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) struct twl4030_usb *twl = _twl; int status; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - status = twl4030_usb_linkstat(twl); - if (status != USB_LINK_UNKNOWN) { - + if (status >= 0) { /* FIXME add a set_power() method so that B-devices can * configure the charger appropriately. It's not always * correct to consume VBUS power, and how much current to @@ -598,12 +580,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if (status == USB_LINK_NONE) + if (status == USB_EVENT_NONE) twl4030_phy_suspend(twl, 0); else twl4030_phy_resume(twl); - twl4030charger_usb_en(status == USB_LINK_VBUS); + blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -693,6 +676,8 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); + BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier); + /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. * @@ -702,7 +687,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) * need both handles, otherwise just one suffices. */ twl->irq_enabled = true; - status = request_irq(twl->irq, twl4030_usb_irq, + status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "twl4030_usb", twl); if (status < 0) { diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index c480ea4c19f2..c78b255e3f83 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_QCAUX + tristate "USB Qualcomm Auxiliary Serial Port Driver" + ---help--- + Say Y here if you want to use the auxiliary serial ports provided + by many modems based on Qualcomm chipsets. These ports often use + a proprietary protocol called DM and cannot be used for AT- or + PPP-based communication. + + To compile this driver as a module, choose M here: the + module will be called moto_modem. If unsure, choose N. + config USB_SERIAL_QUALCOMM tristate "USB Qualcomm Serial modem" help @@ -600,6 +611,14 @@ config USB_SERIAL_OPTICON To compile this driver as a module, choose M here: the module will be called opticon. +config USB_SERIAL_VIVOPAY_SERIAL + tristate "USB ViVOpay serial interface driver" + help + Say Y here if you want to use a ViVOtech ViVOpay USB device. + + To compile this driver as a module, choose M here: the + module will be called vivopay-serial. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 66619beb6cc0..83c9e431a568 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o +obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o @@ -55,4 +56,5 @@ obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o +obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b10ac8409411..365db1097bfd 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -78,7 +78,7 @@ static int debug; #define DRIVER_DESC "AIRcable USB Driver" /* ID table that will be registered with USB core */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) }, { }, }; @@ -468,10 +468,6 @@ static void aircable_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->port.count) { - dbg("%s - port is closed, exiting.", __func__); - return; - } if (status == -EPROTO) { dbg("%s - caught -EPROTO, resubmitting the urb", __func__); @@ -530,23 +526,19 @@ static void aircable_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); - /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - aircable_read_bulk_callback, port); - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&urb->dev->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - } - - return; + /* Schedule the next read */ + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + aircable_read_bulk_callback, port); + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result && result != -EPERM) + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } /* Based on ftdi_sio.c throttle */ diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index a9c2dec8e3fb..547c9448c28c 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -50,7 +50,7 @@ static int debug; /* usb timeout of 1 second */ #define ARK_TIMEOUT (1*HZ) -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, { USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */ { }, @@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty) { - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (unlikely(lsr & UART_LSR_OE)) tty_insert_flip_char(tty, 0, TTY_OVERRUN); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index a0467bc61627..1295e44e3f1c 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -103,7 +103,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) }, { USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) }, { USB_DEVICE(PERACOM_VID, PERACOM_PID) }, diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 59eff721fcc5..9f4fed1968b5 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -22,6 +22,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial.h> +#include <asm/unaligned.h> #define DEFAULT_BAUD_RATE 9600 #define DEFAULT_TIMEOUT 1000 @@ -70,7 +71,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, { USB_DEVICE(0x1a86, 0x7523) }, { }, @@ -392,16 +393,22 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) struct usb_serial_port *port = tty->driver_data; int r; uint16_t reg_contents; - uint8_t break_reg[2]; + uint8_t *break_reg; dbg("%s()", __func__); + break_reg = kmalloc(2, GFP_KERNEL); + if (!break_reg) { + dev_err(&port->dev, "%s - kmalloc failed\n", __func__); + return; + } + r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, - ch341_break_reg, 0, break_reg, sizeof(break_reg)); + ch341_break_reg, 0, break_reg, 2); if (r < 0) { - printk(KERN_WARNING "%s: USB control read error whilst getting" - " break register contents.\n", __FILE__); - return; + dev_err(&port->dev, "%s - USB control read error (%d)\n", + __func__, r); + goto out; } dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", __func__, break_reg[0], break_reg[1]); @@ -416,12 +423,14 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) } dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", __func__, break_reg[0], break_reg[1]); - reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8); + reg_contents = get_unaligned_le16(break_reg); r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); if (r < 0) - printk(KERN_WARNING "%s: USB control write error whilst setting" - " break register contents.\n", __FILE__); + dev_err(&port->dev, "%s - USB control write error (%d)\n", + __func__, r); +out: + kfree(break_reg); } static int ch341_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index bd254ec97d14..507382b0a9ed 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -55,7 +55,7 @@ static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ @@ -91,11 +91,12 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ - { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ @@ -612,7 +613,7 @@ static void cp210x_set_termios(struct tty_struct *tty, baud); if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device\n"); + dbg("Baud rate requested not supported by device"); baud = tty_termios_baud_rate(old_termios); } } diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b0f6402a91ca..f744ab7a3b19 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -70,7 +70,7 @@ static void cyberjack_read_int_callback(struct urb *urb); static void cyberjack_read_bulk_callback(struct urb *urb); static void cyberjack_write_bulk_callback(struct urb *urb); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -391,11 +391,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - ignoring since device not open\n", __func__); + dbg("%s - ignoring since device not open", __func__); return; } if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index a591ebec0f89..e23c77925e7a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -66,17 +66,15 @@ #include <linux/serial.h> #include <linux/delay.h> #include <linux/uaccess.h> +#include <asm/unaligned.h> #include "cypress_m8.h" -#ifdef CONFIG_USB_SERIAL_DEBUG - static int debug = 1; -#else - static int debug; -#endif +static int debug; static int stats; static int interval; +static int unstable_bauds; /* * Version Information @@ -89,24 +87,24 @@ static int interval; #define CYPRESS_BUF_SIZE 1024 #define CYPRESS_CLOSING_WAIT (30*HZ) -static struct usb_device_id id_table_earthmate [] = { +static const struct usb_device_id id_table_earthmate[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_cyphidcomrs232 [] = { +static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_nokiaca42v2 [] = { +static const struct usb_device_id id_table_nokiaca42v2[] = { { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, @@ -154,7 +152,7 @@ struct cypress_private { int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ - /* we pass a pointer to this as the arguement sent to + /* we pass a pointer to this as the argument sent to cypress_set_termios old_termios */ struct ktermios tmp_termios; /* stores the old termios settings */ }; @@ -295,6 +293,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) struct cypress_private *priv; priv = usb_get_serial_port_data(port); + if (unstable_bauds) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -344,7 +345,8 @@ static int cypress_serial_control(struct tty_struct *tty, { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; - __u8 feature_buffer[5]; + u8 *feature_buffer; + const unsigned int feature_len = 5; unsigned long flags; dbg("%s", __func__); @@ -354,17 +356,18 @@ static int cypress_serial_control(struct tty_struct *tty, if (!priv->comm_is_ok) return -ENODEV; + feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL); + if (!feature_buffer) + return -ENOMEM; + switch (cypress_request_type) { case CYPRESS_SET_CONFIG: - new_baudrate = priv->baud_rate; /* 0 means 'Hang up' so doesn't change the true bit rate */ - if (baud_rate == 0) - new_baudrate = priv->baud_rate; - /* Change of speed ? */ - else if (baud_rate != priv->baud_rate) { + new_baudrate = priv->baud_rate; + if (baud_rate && baud_rate != priv->baud_rate) { dbg("%s - baud rate is changing", __func__); retval = analyze_baud_rate(port, baud_rate); - if (retval >= 0) { + if (retval >= 0) { new_baudrate = retval; dbg("%s - New baud rate set to %d", __func__, new_baudrate); @@ -373,9 +376,8 @@ static int cypress_serial_control(struct tty_struct *tty, dbg("%s - baud rate is being sent as %d", __func__, new_baudrate); - memset(feature_buffer, 0, sizeof(feature_buffer)); /* fill the feature_buffer with new configuration */ - *((u_int32_t *)feature_buffer) = new_baudrate; + put_unaligned_le32(new_baudrate, feature_buffer); feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ @@ -397,15 +399,15 @@ static int cypress_serial_control(struct tty_struct *tty, HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); + feature_len, 500); if (tries++ >= 3) break; - } while (retval != sizeof(feature_buffer) && + } while (retval != feature_len && retval != -ENODEV); - if (retval != sizeof(feature_buffer)) { + if (retval != feature_len) { dev_err(&port->dev, "%s - failed sending serial " "line settings - %d\n", __func__, retval); cypress_set_dead(port); @@ -425,43 +427,42 @@ static int cypress_serial_control(struct tty_struct *tty, /* Not implemented for this device, and if we try to do it we're likely to crash the hardware. */ - return -ENOTTY; + retval = -ENOTTY; + goto out; } dbg("%s - retreiving serial line settings", __func__); - /* set initial values in feature buffer */ - memset(feature_buffer, 0, sizeof(feature_buffer)); - do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); + feature_len, 500); if (tries++ >= 3) break; - } while (retval != sizeof(feature_buffer) + } while (retval != feature_len && retval != -ENODEV); - if (retval != sizeof(feature_buffer)) { + if (retval != feature_len) { dev_err(&port->dev, "%s - failed to retrieve serial " "line settings - %d\n", __func__, retval); cypress_set_dead(port); - return retval; + goto out; } else { spin_lock_irqsave(&priv->lock, flags); /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; - priv->baud_rate = *((u_int32_t *)feature_buffer); + priv->baud_rate = get_unaligned_le32(feature_buffer); spin_unlock_irqrestore(&priv->lock, flags); } } spin_lock_irqsave(&priv->lock, flags); ++priv->cmd_count; spin_unlock_irqrestore(&priv->lock, flags); - +out: + kfree(feature_buffer); return retval; } /* cypress_serial_control */ @@ -690,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on) { struct cypress_private *priv = usb_get_serial_port_data(port); /* drop dtr and rts */ - priv = usb_get_serial_port_data(port); spin_lock_irq(&priv->lock); if (on == 0) priv->line_control = 0; @@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); /* process read if there is data other than line status */ - if (tty && (bytes > i)) { - bytes = tty_buffer_request_room(tty, bytes); - for (; i < bytes ; ++i) { - dbg("pushing byte number %d - %d - %c", i, data[i], - data[i]); - tty_insert_flip_char(tty, data[i], tty_flag); - } + if (tty && bytes > i) { + tty_insert_flip_string_fixed_flag(tty, data + i, + bytes - i, tty_flag); tty_flip_buffer_push(tty); } @@ -1325,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb) continue_read: tty_kref_put(tty); - /* Continue trying to always read... unless the port has closed. */ + /* Continue trying to always read */ - if (port->port.count > 0 && priv->comm_is_ok) { + if (priv->comm_is_ok) { usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), @@ -1336,7 +1332,7 @@ continue_read: cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result) { + if (result && result != -EPERM) { dev_err(&urb->dev->dev, "%s - failed resubmitting " "read urb, error %d\n", __func__, result); @@ -1650,3 +1646,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(stats, "Enable statistics or not"); module_param(interval, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(interval, "Overrides interrupt interval"); +module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates"); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 68e80be6b9e1..68b0aa5e516c 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -470,18 +470,18 @@ static int digi_read_oob_callback(struct urb *urb); static int debug; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_2 [] = { +static const struct usb_device_id id_table_2[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_4 [] = { +static const struct usb_device_id id_table_4[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, { } /* Terminating entry */ }; @@ -1262,10 +1262,10 @@ static void digi_write_bulk_callback(struct urb *urb) return; } - /* try to send any buffered data on this port, if it is open */ + /* try to send any buffered data on this port */ spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - if (port->port.count && priv->dp_out_buf_len > 0) { + if (priv->dp_out_buf_len > 0) { *((unsigned char *)(port->write_urb->transfer_buffer)) = (unsigned char)DIGI_CMD_SEND_DATA; *((unsigned char *)(port->write_urb->transfer_buffer) + 1) @@ -1288,7 +1288,7 @@ static void digi_write_bulk_callback(struct urb *urb) schedule_work(&priv->dp_wakeup_work); spin_unlock(&priv->dp_port_lock); - if (ret) + if (ret && ret != -EPERM) dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); @@ -1353,8 +1353,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - dbg("digi_open: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->port.count); + dbg("digi_open: TOP: port=%d", priv->dp_port_num); /* be sure the device is started up */ if (digi_startup_device(port->serial) != 0) @@ -1393,8 +1392,7 @@ static void digi_close(struct usb_serial_port *port) unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); - dbg("digi_close: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->port.count); + dbg("digi_close: TOP: port=%d", priv->dp_port_num); mutex_lock(&port->serial->disc_mutex); /* if disconnected, just clear flags */ @@ -1629,7 +1627,7 @@ static void digi_read_bulk_callback(struct urb *urb) /* continue read */ urb->dev = port->serial->dev; ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret != 0) { + if (ret != 0 && ret != -EPERM) { dev_err(&port->dev, "%s: failed resubmitting urb, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); @@ -1658,12 +1656,11 @@ static int digi_read_inb_callback(struct urb *urb) int port_status = ((unsigned char *)urb->transfer_buffer)[2]; unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3; int flag, throttled; - int i; int status = urb->status; /* do not process callbacks on closed ports */ /* but do continue the read chain */ - if (port->port.count == 0) + if (urb->status == -ENOENT) return 0; /* short/multiple packet check */ @@ -1705,17 +1702,9 @@ static int digi_read_inb_callback(struct urb *urb) /* data length is len-1 (one byte of len is port_status) */ --len; - - len = tty_buffer_request_room(tty, len); if (len > 0) { - /* Hot path */ - if (flag == TTY_NORMAL) - tty_insert_flip_string(tty, data, len); - else { - for (i = 0; i < len; i++) - tty_insert_flip_char(tty, - data[i], flag); - } + tty_insert_flip_string_fixed_flag(tty, data, len, + flag); tty_flip_buffer_push(tty); } } @@ -1776,8 +1765,7 @@ static int digi_read_oob_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); rts = 0; - if (port->port.count) - rts = tty->termios->c_cflag & CRTSCTS; + rts = tty->termios->c_cflag & CRTSCTS; if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 7dd0e3eadbe6..5f740a1eacab 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -93,7 +93,7 @@ static void empeg_init_termios(struct tty_struct *tty); static void empeg_write_bulk_callback(struct urb *urb); static void empeg_read_bulk_callback(struct urb *urb); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); bytes_in += urb->actual_length; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7638828e7317..6af0dfa5f5ac 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -33,12 +33,12 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/serial.h> @@ -88,10 +88,10 @@ struct ftdi_private { unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ - unsigned long tx_bytes; unsigned long tx_outstanding_bytes; unsigned long tx_outstanding_urbs; unsigned short max_packet_size; + struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */ }; /* struct ftdi_sio_quirk is used by devices requiring special attention. */ @@ -614,6 +614,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, @@ -737,6 +738,10 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -812,7 +817,7 @@ static struct usb_serial_driver ftdi_sio_device = { .name = "ftdi_sio", }, .description = "FTDI USB Serial Device", - .usb_driver = &ftdi_driver , + .usb_driver = &ftdi_driver, .id_table = id_table_combined, .num_ports = 1, .probe = ftdi_sio_probe, @@ -828,8 +833,8 @@ static struct usb_serial_driver ftdi_sio_device = { .chars_in_buffer = ftdi_chars_in_buffer, .read_bulk_callback = ftdi_read_bulk_callback, .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, @@ -935,7 +940,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char *buf; unsigned urb_value; int rv; @@ -944,10 +948,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, return 0; /* no change */ } - buf = kmalloc(1, GFP_NOIO); - if (!buf) - return -ENOMEM; - clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (clear & TIOCM_DTR) @@ -963,9 +963,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, urb_value, priv->interface, - buf, 0, WDR_TIMEOUT); - - kfree(buf); + NULL, 0, WDR_TIMEOUT); if (rv < 0) { dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", __func__, @@ -1124,16 +1122,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char *buf; __u16 urb_value; __u16 urb_index; __u32 urb_index_value; int rv; - buf = kmalloc(1, GFP_NOIO); - if (!buf) - return -ENOMEM; - urb_index_value = get_ftdi_divisor(tty, port); urb_value = (__u16)urb_index_value; urb_index = (__u16)(urb_index_value >> 16); @@ -1146,9 +1139,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) FTDI_SIO_SET_BAUDRATE_REQUEST, FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, urb_value, urb_index, - buf, 0, WDR_SHORT_TIMEOUT); - - kfree(buf); + NULL, 0, WDR_SHORT_TIMEOUT); return rv; } @@ -1156,8 +1147,7 @@ static int write_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - char buf[1]; - int rv = 0; + int rv; int l = priv->latency; if (priv->flags & ASYNC_LOW_LATENCY) @@ -1170,8 +1160,7 @@ static int write_latency_timer(struct usb_serial_port *port) FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, l, priv->interface, - buf, 0, WDR_TIMEOUT); - + NULL, 0, WDR_TIMEOUT); if (rv < 0) dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); return rv; @@ -1181,24 +1170,29 @@ static int read_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; - int rv = 0; - + unsigned char *buf; + int rv; dbg("%s", __func__); + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - - if (rv < 0) { + buf, 1, WDR_TIMEOUT); + if (rv < 0) dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } - return latency; + else + priv->latency = buf[0]; + + kfree(buf); + + return rv; } static int get_serial_info(struct usb_serial_port *port, @@ -1229,7 +1223,7 @@ static int set_serial_info(struct tty_struct *tty, if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) return -EFAULT; - lock_kernel(); + mutex_lock(&priv->cfg_lock); old_priv = *priv; /* Do error checking and permission checking */ @@ -1237,7 +1231,7 @@ static int set_serial_info(struct tty_struct *tty, if (!capable(CAP_SYS_ADMIN)) { if (((new_serial.flags & ~ASYNC_USR_MASK) != (priv->flags & ~ASYNC_USR_MASK))) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return -EPERM; } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | @@ -1248,7 +1242,7 @@ static int set_serial_info(struct tty_struct *tty, if ((new_serial.baud_base != priv->baud_base) && (new_serial.baud_base < 9600)) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return -EINVAL; } @@ -1278,11 +1272,11 @@ check_and_exit: (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); change_speed(tty, port); } else - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return 0; } /* set_serial_info */ @@ -1338,20 +1332,20 @@ static void ftdi_determine_type(struct usb_serial_port *port) __func__); } } else if (version < 0x200) { - /* Old device. Assume its the original SIO. */ + /* Old device. Assume it's the original SIO. */ priv->chip_type = SIO; priv->baud_base = 12000000 / 16; priv->write_offset = 1; } else if (version < 0x400) { - /* Assume its an FT8U232AM (or FT8U245AM) */ + /* Assume it's an FT8U232AM (or FT8U245AM) */ /* (It might be a BM because of the iSerialNumber bug, * but it will still work as an AM device.) */ priv->chip_type = FT8U232AM; } else if (version < 0x600) { - /* Assume its an FT232BM (or FT245BM) */ + /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; } else { - /* Assume its an FT232R */ + /* Assume it's an FT232R */ priv->chip_type = FT232RL; } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); @@ -1371,7 +1365,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; unsigned num_endpoints; - int i = 0; + int i; num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); @@ -1423,7 +1417,7 @@ static ssize_t store_latency_timer(struct device *dev, struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); int v = simple_strtoul(valbuf, NULL, 10); - int rv = 0; + int rv; priv->latency = v; rv = write_latency_timer(port); @@ -1440,9 +1434,8 @@ static ssize_t store_event_char(struct device *dev, struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); - int rv = 0; + int rv; dbg("%s: setting event char = %i", __func__, v); @@ -1451,8 +1444,7 @@ static ssize_t store_event_char(struct device *dev, FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, v, priv->interface, - buf, 0, WDR_TIMEOUT); - + NULL, 0, WDR_TIMEOUT); if (rv < 0) { dbg("Unable to write event character: %i", rv); return -EIO; @@ -1551,9 +1543,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); spin_lock_init(&priv->tx_lock); + mutex_init(&priv->cfg_lock); init_waitqueue_head(&priv->delta_msr_wait); - /* This will push the characters through immediately rather - than queue a task to deliver them */ + priv->flags = ASYNC_LOW_LATENCY; if (quirk && quirk->port_probe) @@ -1585,7 +1577,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) ftdi_determine_type(port); ftdi_set_max_packet_size(port); - read_latency_timer(port); + if (read_latency_timer(port) < 0) + priv->latency = 16; create_sysfs_attrs(port); return 0; } @@ -1630,8 +1623,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) { struct usb_device *udev = serial->dev; int latency = ndi_latency_timer; - int rv = 0; - char buf[1]; if (latency == 0) latency = 1; @@ -1641,10 +1632,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) dbg("%s setting NDI device latency to %d", __func__, latency); dev_info(&udev->dev, "NDI device with a latency value of %d", latency); - rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + /* FIXME: errors are not returned */ + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - latency, 0, buf, 0, WDR_TIMEOUT); + latency, 0, NULL, 0, WDR_TIMEOUT); return 0; } @@ -1720,7 +1712,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) urb->transfer_buffer_length, ftdi_read_bulk_callback, port); result = usb_submit_urb(urb, mem_flags); - if (result) + if (result && result != -EPERM) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); @@ -1732,16 +1724,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - - int result = 0; - char buf[1]; /* Needed for the usb_control_msg I think */ + int result; dbg("%s", __func__); - spin_lock_irqsave(&priv->tx_lock, flags); - priv->tx_bytes = 0; - spin_unlock_irqrestore(&priv->tx_lock, flags); - write_latency_timer(port); /* No error checking for this (will get errors later anyway) */ @@ -1749,7 +1735,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, FTDI_SIO_RESET_SIO, - priv->interface, buf, 0, WDR_TIMEOUT); + priv->interface, NULL, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change port->tty->termios - this would lose speed settings, etc. @@ -1777,7 +1763,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) static void ftdi_dtr_rts(struct usb_serial_port *port, int on) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { @@ -1786,7 +1771,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, + 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "error from flowcontrol urb\n"); } @@ -1847,7 +1832,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->tx_lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->tx_outstanding_urbs++; @@ -1927,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, } else { spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_outstanding_bytes += count; - priv->tx_bytes += count; spin_unlock_irqrestore(&priv->tx_lock, flags); } @@ -2154,8 +2138,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value = 0; - char buf[1]; + __u16 urb_value; /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ @@ -2171,7 +2154,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state " "(state was %d)\n", __func__, break_state); } @@ -2195,7 +2178,6 @@ static void ftdi_set_termios(struct tty_struct *tty, struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ - char buf[1]; /* Perhaps I should dynamically alloc this? */ /* Added for xon/xoff support */ unsigned int iflag = termios->c_iflag; @@ -2246,12 +2228,10 @@ static void ftdi_set_termios(struct tty_struct *tty, } if (cflag & CSIZE) { switch (cflag & CSIZE) { - case CS5: urb_value |= 5; dbg("Setting CS5"); break; - case CS6: urb_value |= 6; dbg("Setting CS6"); break; case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break; default: - dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n"); + dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n"); } } @@ -2263,7 +2243,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, - buf, 0, WDR_SHORT_TIMEOUT) < 0) { + NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to set " "databits/stopbits/parity\n", __func__); } @@ -2275,7 +2255,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s error from disable flowcontrol urb\n", __func__); @@ -2301,7 +2281,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to set to rts/cts flow control\n"); } @@ -2333,7 +2313,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, urb_value , (FTDI_SIO_XON_XOFF_HS | priv->interface), - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to set to " "xon/xoff flow control\n"); } @@ -2347,7 +2327,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to clear flow control\n"); } @@ -2361,21 +2341,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - unsigned char buf[2]; + unsigned char *buf; + int len; int ret; dbg("%s TIOCMGET", __func__); + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + /* + * The 8U232AM returns a two byte value (the SIO a 1 byte value) in + * the same format as the data returned from the in point. + */ switch (priv->chip_type) { case SIO: - /* Request the status from the device */ - ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, 0, - buf, 1, WDR_TIMEOUT); - if (ret < 0) - return ret; + len = 1; break; case FT8U232AM: case FT232BM: @@ -2383,27 +2364,30 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) case FT232RL: case FT2232H: case FT4232H: - /* the 8U232AM returns a two byte value (the sio is a 1 byte - value) - in the same format as the data returned from the in - point */ - ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, - buf, 2, WDR_TIMEOUT); - if (ret < 0) - return ret; + len = 2; break; default: - return -EFAULT; + ret = -EFAULT; + goto out; } - return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | + ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, priv->interface, + buf, len, WDR_TIMEOUT); + if (ret < 0) + goto out; + + ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | priv->last_dtr_rts; +out: + kfree(buf); + return ret; } static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, @@ -2508,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty) port->throttled = port->throttle_req = 0; spin_unlock_irqrestore(&port->lock, flags); - /* Resubmit urb if throttled and open. */ - if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + if (was_throttled) ftdi_submit_read_urb(port, GFP_KERNEL); } diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index b0e0d64f822e..ff9bf80327a3 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -28,13 +28,13 @@ #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ -#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ +#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */ #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ -/* Interface indicies for FT2232, FT2232H and FT4232H devices*/ +/* Interface indices for FT2232, FT2232H and FT4232H devices */ #define INTERFACE_A 1 #define INTERFACE_B 2 #define INTERFACE_C 3 @@ -270,7 +270,7 @@ typedef enum { * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_FLOW_CTRL * wValue: Xoff/Xon - * wIndex: Protocol/Port - hIndex is protocl / lIndex is port + * wIndex: Protocol/Port - hIndex is protocol / lIndex is port * wLength: 0 * Data: None * diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index c8951aeed983..0727e198503e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -22,7 +22,7 @@ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ @@ -49,7 +49,7 @@ #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 @@ -185,7 +185,7 @@ #define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ #define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ #define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ @@ -212,8 +212,8 @@ * drivers, or possibly the Comedi drivers in some cases. */ #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */ #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ /* @@ -320,7 +320,7 @@ /* * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices * and I'm not entirely sure which are used by which. */ #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 @@ -330,10 +330,10 @@ * Linx Technologies product ids */ #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ /* * Oceanic product ids @@ -494,6 +494,13 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Contec products (http://www.contec.com) + * Submitted by Daniel Sangorrin + */ +#define CONTEC_VID 0x06CE /* Vendor ID */ +#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ + +/* * Definitions for B&B Electronics products. */ #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ @@ -642,7 +649,7 @@ #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ -/* Larsen and Brusgaard AltiTrack/USBtrack */ +/* Larsen and Brusgaard AltiTrack/USBtrack */ #define LARSENBRUSGAARD_VID 0x0FD8 #define LB_ALTITRACK_PID 0x0001 @@ -971,7 +978,7 @@ #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* - * Dresden Elektronic Sensor Terminal Board + * Dresden Elektronik Sensor Terminal Board */ #define DE_VID 0x1cf1 /* Vendor ID */ #define STB_PID 0x0001 /* Sensor Terminal Board */ @@ -1002,3 +1009,11 @@ #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* + * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403) + */ +#define MJSG_GENERIC_PID 0x9378 +#define MJSG_SR_RADIO_PID 0x9379 +#define MJSG_XM_RADIO_PID 0x937A +#define MJSG_HD_RADIO_PID 0x937C diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index d30f736d2cc5..e21ce9ddfc63 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -18,7 +18,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, { }, }; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 5ac900e5a50e..a42b29a695b2 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -210,7 +210,7 @@ static unsigned char const PRIVATE_REQ[] -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { /* the same device id seems to be used by all usb enabled GPS devices */ { USB_DEVICE(GARMIN_VENDOR_ID, 3) }, @@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port, usb_serial_debug_data(debug, &port->dev, __func__, actual_length, data); - tty_buffer_request_room(tty, actual_length); tty_insert_flip_string(tty, data, actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 83443d6306d6..89fac36684c5 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -20,6 +20,7 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> #include <linux/kfifo.h> +#include <linux/serial.h> static int debug; @@ -41,7 +42,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* we want to look at all devices, as the vendor/product id can change * depending on the command line argument */ -static struct usb_device_id generic_serial_ids[] = { +static const struct usb_device_id generic_serial_ids[] = { {.driver_info = 42}, {} }; @@ -194,7 +195,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty, if (port->urbs_in_flight > port->serial->type->max_in_flight_urbs) { spin_unlock_irqrestore(&port->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return bwrite; } port->tx_bytes_flight += towrite; @@ -585,7 +586,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - if (!port->port.count) + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) continue; if (port->read_urb) { diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 431329275133..809379159b0e 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -29,7 +29,7 @@ #define HP_VENDOR_ID 0x03f0 #define HP49GP_PRODUCT_ID 0x0121 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index b97960ac92f2..3ef8df0ef888 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -364,42 +364,6 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) release_firmware(fw); } - -/************************************************************************ - * * - * Get string descriptor from device * - * * - ************************************************************************/ -static int get_string(struct usb_device *dev, int Id, char *string, int buflen) -{ - struct usb_string_descriptor StringDesc; - struct usb_string_descriptor *pStringDesc; - - dbg("%s - USB String ID = %d", __func__, Id); - - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, - &StringDesc, sizeof(StringDesc))) - return 0; - - pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); - if (!pStringDesc) - return 0; - - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, - pStringDesc, StringDesc.bLength)) { - kfree(pStringDesc); - return 0; - } - - unicode_to_ascii(string, buflen, - pStringDesc->wData, pStringDesc->bLength/2); - - kfree(pStringDesc); - dbg("%s - USB String %s", __func__, string); - return strlen(string); -} - - #if 0 /************************************************************************ * @@ -2007,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, return; case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3); + dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3); /* Port->RxCheckRsp = true; */ return; } @@ -2075,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, break; default: - dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); + dbg("%s - Unrecognized IOSP status code %u", __func__, code); break; } return; @@ -2091,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, { int cnt; - do { - cnt = tty_buffer_request_room(tty, length); - if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", - __func__, length - cnt); - if (cnt == 0) - break; - } - tty_insert_flip_string(tty, data, cnt); - data += cnt; - length -= cnt; - } while (length > 0); + cnt = tty_insert_flip_string(tty, data, length); + if (cnt < length) { + dev_err(dev, "%s - dropping data, %d bytes lost\n", + __func__, length - cnt); + } + data += cnt; + length -= cnt; tty_flip_buffer_push(tty); } @@ -2530,7 +2489,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) *divisor = custom; - dbg("%s - Baud %d = %d\n", __func__, baudrate, custom); + dbg("%s - Baud %d = %d", __func__, baudrate, custom); return 0; } @@ -2915,7 +2874,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) break; case EDGE_DOWNLOAD_FILE_NONE: - dbg ("No download file specified, skipping download\n"); + dbg("No download file specified, skipping download"); return; default: @@ -2997,10 +2956,12 @@ static int edge_startup(struct usb_serial *serial) usb_set_serial_data(serial, edge_serial); /* get the name for the device from the device */ - i = get_string(dev, dev->descriptor.iManufacturer, + i = usb_string(dev, dev->descriptor.iManufacturer, &edge_serial->name[0], MAX_NAME_LEN+1); + if (i < 0) + i = 0; edge_serial->name[i++] = ' '; - get_string(dev, dev->descriptor.iProduct, + usb_string(dev, dev->descriptor.iProduct, &edge_serial->name[i], MAX_NAME_LEN+2 - i); dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 9241d3147513..feb56a4ca799 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -14,7 +14,7 @@ #ifndef IO_TABLES_H #define IO_TABLES_H -static struct usb_device_id edgeport_2port_id_table [] = { +static const struct usb_device_id edgeport_2port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, @@ -23,7 +23,7 @@ static struct usb_device_id edgeport_2port_id_table [] = { { } }; -static struct usb_device_id edgeport_4port_id_table [] = { +static const struct usb_device_id edgeport_4port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, @@ -37,7 +37,7 @@ static struct usb_device_id edgeport_4port_id_table [] = { { } }; -static struct usb_device_id edgeport_8port_id_table [] = { +static const struct usb_device_id edgeport_8port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, @@ -47,7 +47,7 @@ static struct usb_device_id edgeport_8port_id_table [] = { { } }; -static struct usb_device_id Epic_port_id_table [] = { +static const struct usb_device_id Epic_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, @@ -60,7 +60,7 @@ static struct usb_device_id Epic_port_id_table [] = { }; /* Devices that this driver supports */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index d4cc0f7af400..aa876f71f228 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -134,7 +134,7 @@ struct edgeport_serial { /* Devices that this driver supports */ -static struct usb_device_id edgeport_1port_id_table [] = { +static const struct usb_device_id edgeport_1port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, @@ -154,7 +154,7 @@ static struct usb_device_id edgeport_1port_id_table [] = { { } }; -static struct usb_device_id edgeport_2port_id_table [] = { +static const struct usb_device_id edgeport_2port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) }, @@ -177,7 +177,7 @@ static struct usb_device_id edgeport_2port_id_table [] = { }; /* Devices that this driver supports */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, @@ -413,11 +413,18 @@ static int write_boot_mem(struct edgeport_serial *serial, { int status = 0; int i; - __u8 temp; + u8 *temp; /* Must do a read before write */ if (!serial->TiReadI2C) { - status = read_boot_mem(serial, 0, 1, &temp); + temp = kmalloc(1, GFP_KERNEL); + if (!temp) { + dev_err(&serial->serial->dev->dev, + "%s - out of memory\n", __func__); + return -ENOMEM; + } + status = read_boot_mem(serial, 0, 1, temp); + kfree(temp); if (status) return status; } @@ -935,37 +942,47 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) static int i2c_type_bootmode(struct edgeport_serial *serial) { int status; - __u8 data; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) { + dev_err(&serial->serial->dev->dev, + "%s - out of memory\n", __func__); + return -ENOMEM; + } /* Try to read type 2 */ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, - DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01); + DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); if (status) dbg("%s - read 2 status error = %d", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, data); - if ((!status) && (data == UMP5152 || data == UMP3410)) { + dbg("%s - read 2 data = 0x%x", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { dbg("%s - ROM_TYPE_II", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - return 0; + goto out; } /* Try to read type 3 */ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, - DTK_ADDR_SPACE_I2C_TYPE_III, 0, &data, 0x01); + DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); if (status) dbg("%s - read 3 status error = %d", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, data); - if ((!status) && (data == UMP5152 || data == UMP3410)) { + dbg("%s - read 2 data = 0x%x", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { dbg("%s - ROM_TYPE_III", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; - return 0; + goto out; } dbg("%s - Unknown", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - return -ENODEV; + status = -ENODEV; +out: + kfree(data); + return status; } static int bulk_xfer(struct usb_serial *serial, void *buffer, @@ -1113,7 +1130,7 @@ static int download_fw(struct edgeport_serial *serial) I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); if (start_address != 0) { struct ti_i2c_firmware_rec *firmware_version; - __u8 record; + u8 *record; dbg("%s - Found Type FIRMWARE (Type 2) record", __func__); @@ -1165,6 +1182,15 @@ static int download_fw(struct edgeport_serial *serial) OperationalMajorVersion, OperationalMinorVersion); + record = kmalloc(1, GFP_KERNEL); + if (!record) { + dev_err(dev, "%s - out of memory.\n", + __func__); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } /* In order to update the I2C firmware we must * change the type 2 record to type 0xF2. This * will force the UMP to come up in Boot Mode. @@ -1177,13 +1203,14 @@ static int download_fw(struct edgeport_serial *serial) * firmware will update the record type from * 0xf2 to 0x02. */ - record = I2C_DESC_TYPE_FIRMWARE_BLANK; + *record = I2C_DESC_TYPE_FIRMWARE_BLANK; /* Change the I2C Firmware record type to 0xf2 to trigger an update */ status = write_rom(serial, start_address, - sizeof(record), &record); + sizeof(*record), record); if (status) { + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1196,19 +1223,21 @@ static int download_fw(struct edgeport_serial *serial) */ status = read_rom(serial, start_address, - sizeof(record), - &record); + sizeof(*record), + record); if (status) { + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); return status; } - if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) { + if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { dev_err(dev, "%s - error resetting device\n", __func__); + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1226,6 +1255,7 @@ static int download_fw(struct edgeport_serial *serial) __func__, status); /* return an error on purpose. */ + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1686,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg("%s - ===== Port %u MSR Status = %02x ======\n", + dbg("%s - ===== Port %u MSR Status = %02x ======", __func__, port_number, msr); handle_new_msr(edge_port, msr); break; @@ -1790,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, { int queued; - tty_buffer_request_room(tty, length); queued = tty_insert_flip_string(tty, data, length); if (queued < length) dev_err(dev, "%s - dropping data, %d bytes lost\n", diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d6231c38813e..3fea9298eb15 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); bytes_in += urb->actual_length; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 727d323f092a..e1d07840cee6 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -134,7 +134,7 @@ enum { #define IPW_WANTS_TO_SEND 0x30 -static struct usb_device_id usb_ipw_ids[] = { +static const struct usb_device_id usb_ipw_ids[] = { { USB_DEVICE(IPW_VID, IPW_PID) }, { }, }; @@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 95d8d26b9a44..4a0f51974232 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -100,7 +100,7 @@ static u8 ir_baud; static u8 ir_xbof; static u8 ir_add_bof; -static struct usb_device_id ir_id_table[] = { +static const struct usb_device_id ir_id_table[] = { { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */ { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */ { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */ @@ -445,11 +445,6 @@ static void ir_read_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); - if (!port->port.count) { - dbg("%s - port closed.", __func__); - return; - } - switch (status) { case 0: /* Successful */ /* @@ -462,10 +457,8 @@ static void ir_read_bulk_callback(struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = tty_port_tty_get(&port->port); - if (tty_buffer_request_room(tty, urb->actual_length - 1)) { - tty_insert_flip_string(tty, data+1, urb->actual_length - 1); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data+1, urb->actual_length - 1); + tty_flip_buffer_push(tty); tty_kref_put(tty); /* diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index e6e02b178d2b..43f13cf2f016 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -43,7 +43,7 @@ static int debug; #define DRIVER_VERSION "v0.11" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)}, {} /* Terminating entry */ }; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index f8c4b07033ff..297163c3c610 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -464,13 +464,9 @@ static void usa26_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } - return; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } /* Outdat handling is common for all devices */ @@ -483,8 +479,7 @@ static void usa2x_outdat_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); - if (port->port.count) - usb_serial_port_softint(port); + usb_serial_port_softint(port); } static void usa26_inack_callback(struct urb *urb) @@ -615,12 +610,10 @@ static void usa28_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); p_priv->in_flip ^= 1; urb = p_priv->in_urbs[p_priv->in_flip]; @@ -856,12 +849,9 @@ static void usa49_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } static void usa49wg_indat_callback(struct urb *urb) @@ -904,11 +894,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* no error on any byte */ i++; for (x = 1; x < len ; ++x) - if (port->port.count) - tty_insert_flip_char(tty, - data[i++], 0); - else - i++; + tty_insert_flip_char(tty, data[i++], 0); } else { /* * some bytes had errors, every byte has status @@ -922,14 +908,12 @@ static void usa49wg_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - if (port->port.count) - tty_insert_flip_char(tty, + tty_insert_flip_char(tty, data[i+1], flag); i += 2; } } - if (port->port.count) - tty_flip_buffer_push(tty); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } @@ -1013,13 +997,9 @@ static void usa90_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } - return; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } @@ -2418,8 +2398,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, msg.portEnabled = 0; /* Sending intermediate configs */ else { - if (port->port.count) - msg.portEnabled = 1; + msg.portEnabled = 1; msg.txBreak = (p_priv->break_on); } diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 30771e5b3973..bf3297ddd186 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -456,7 +456,7 @@ static const struct keyspan_device_details *keyspan_devices[] = { NULL, }; -static struct usb_device_id keyspan_ids_combined[] = { +static const struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, @@ -497,7 +497,7 @@ static struct usb_driver keyspan_driver = { }; /* usb_device_id table for the pre-firmware download keyspan devices */ -static struct usb_device_id keyspan_pre_ids[] = { +static const struct usb_device_id keyspan_pre_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, @@ -513,7 +513,7 @@ static struct usb_device_id keyspan_pre_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_1port_ids[] = { +static const struct usb_device_id keyspan_1port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, @@ -524,7 +524,7 @@ static struct usb_device_id keyspan_1port_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_2port_ids[] = { +static const struct usb_device_id keyspan_2port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, @@ -532,7 +532,7 @@ static struct usb_device_id keyspan_2port_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_4port_ids[] = { +static const struct usb_device_id keyspan_4port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 1296a097f5c3..185fe9a7d4e0 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -125,7 +125,7 @@ struct keyspan_pda_private { #define ENTREGRA_VENDOR_ID 0x1645 #define ENTREGRA_FAKE_ID 0x8093 -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { #ifdef KEYSPAN { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, #endif @@ -147,20 +147,20 @@ static struct usb_driver keyspan_pda_driver = { .no_dynamic_id = 1, }; -static struct usb_device_id id_table_std [] = { +static const struct usb_device_id id_table_std[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, { } /* Terminating entry */ }; #ifdef KEYSPAN -static struct usb_device_id id_table_fake [] = { +static const struct usb_device_id id_table_fake[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, { } /* Terminating entry */ }; #endif #ifdef XIRCOM -static struct usb_device_id id_table_fake_xircom [] = { +static const struct usb_device_id id_table_fake_xircom[] = { { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, { } @@ -429,13 +429,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, unsigned char *value) { int rc; - unsigned char data; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, - 0, 0, &data, 1, 2000); + 0, 0, data, 1, 2000); if (rc >= 0) - *value = data; + *value = *data; + + kfree(data); return rc; } @@ -543,7 +550,14 @@ static int keyspan_pda_write(struct tty_struct *tty, device how much room it really has. This is done only on scheduler time, since usb_control_msg() sleeps. */ if (count > priv->tx_room && !in_interrupt()) { - unsigned char room; + u8 *room; + + room = kmalloc(1, GFP_KERNEL); + if (!room) { + rc = -ENOMEM; + goto exit; + } + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 6, /* write_room */ @@ -551,9 +565,14 @@ static int keyspan_pda_write(struct tty_struct *tty, | USB_DIR_IN, 0, /* value: 0 means "remaining room" */ 0, /* index */ - &room, + room, 1, 2000); + if (rc > 0) { + dbg(" roomquery says %d", *room); + priv->tx_room = *room; + } + kfree(room); if (rc < 0) { dbg(" roomquery failed"); goto exit; @@ -563,8 +582,6 @@ static int keyspan_pda_write(struct tty_struct *tty, rc = -EIO; /* device didn't return any data */ goto exit; } - dbg(" roomquery says %d", room); - priv->tx_room = room; } if (count > priv->tx_room) { /* we're about to completely fill the Tx buffer, so @@ -684,18 +701,22 @@ static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - unsigned char room; + u8 *room; int rc = 0; struct keyspan_pda_private *priv; /* find out how much room is in the Tx ring */ + room = kmalloc(1, GFP_KERNEL); + if (!room) + return -ENOMEM; + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 6, /* write_room */ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN, 0, /* value */ 0, /* index */ - &room, + room, 1, 2000); if (rc < 0) { @@ -708,8 +729,8 @@ static int keyspan_pda_open(struct tty_struct *tty, goto error; } priv = usb_get_serial_port_data(port); - priv->tx_room = room; - priv->tx_throttled = room ? 0 : 1; + priv->tx_room = *room; + priv->tx_throttled = *room ? 0 : 1; /*Start reading from the device*/ port->interrupt_in_urb->dev = serial->dev; @@ -718,8 +739,8 @@ static int keyspan_pda_open(struct tty_struct *tty, dbg("%s - usb_submit_urb(read int) failed", __func__); goto error; } - error: + kfree(room); return rc; } static void keyspan_pda_close(struct usb_serial_port *port) @@ -789,6 +810,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) return 1; } +#ifdef KEYSPAN +MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); +#endif +#ifdef XIRCOM +MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); +#endif + static int keyspan_pda_startup(struct usb_serial *serial) { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 3a7873806f46..8eef91ba4b1c 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -94,7 +94,7 @@ static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, /* * All of the device info needed for the KLSI converters. */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, { } /* Terminating entry */ @@ -212,10 +212,19 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, unsigned long *line_state_p) { int rc; - __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1}; + u8 *status_buf; __u16 status; dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); + + status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); + if (!status_buf) { + dev_err(&port->dev, "%s - out of memory for status buffer.\n", + __func__); + return -ENOMEM; + } + status_buf[0] = 0xff; + status_buf[1] = 0xff; rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_POLL, @@ -236,6 +245,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, *line_state_p = klsi_105_status2linestate(status); } + + kfree(status_buf); return rc; } @@ -364,7 +375,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) int rc; int i; unsigned long line_state; - struct klsi_105_port_settings cfg; + struct klsi_105_port_settings *cfg; unsigned long flags; dbg("%s port %d", __func__, port->number); @@ -376,12 +387,18 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) * Then read the modem line control and store values in * priv->line_state. */ - cfg.pktlen = 5; - cfg.baudrate = kl5kusb105a_sio_b9600; - cfg.databits = kl5kusb105a_dtb_8; - cfg.unknown1 = 0; - cfg.unknown2 = 1; - klsi_105_chg_port_settings(port, &cfg); + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) { + dev_err(&port->dev, "%s - out of memory for config buffer.\n", + __func__); + return -ENOMEM; + } + cfg->pktlen = 5; + cfg->baudrate = kl5kusb105a_sio_b9600; + cfg->databits = kl5kusb105a_dtb_8; + cfg->unknown1 = 0; + cfg->unknown2 = 1; + klsi_105_chg_port_settings(port, cfg); /* set up termios structure */ spin_lock_irqsave(&priv->lock, flags); @@ -391,11 +408,11 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) priv->termios.c_lflag = tty->termios->c_lflag; for (i = 0; i < NCCS; i++) priv->termios.c_cc[i] = tty->termios->c_cc[i]; - priv->cfg.pktlen = cfg.pktlen; - priv->cfg.baudrate = cfg.baudrate; - priv->cfg.databits = cfg.databits; - priv->cfg.unknown1 = cfg.unknown1; - priv->cfg.unknown2 = cfg.unknown2; + priv->cfg.pktlen = cfg->pktlen; + priv->cfg.baudrate = cfg->baudrate; + priv->cfg.databits = cfg->databits; + priv->cfg.unknown1 = cfg->unknown1; + priv->cfg.unknown2 = cfg->unknown2; spin_unlock_irqrestore(&priv->lock, flags); /* READ_ON and urb submission */ @@ -441,6 +458,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) retval = rc; exit: + kfree(cfg); return retval; } /* klsi_105_open */ @@ -681,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb) bytes_sent = urb->actual_length - 2; } - tty_buffer_request_room(tty, bytes_sent); tty_insert_flip_string(tty, data + 2, bytes_sent); tty_flip_buffer_push(tty); tty_kref_put(tty); @@ -714,10 +731,17 @@ static void klsi_105_set_termios(struct tty_struct *tty, unsigned int old_iflag = old_termios->c_iflag; unsigned int cflag = tty->termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; - struct klsi_105_port_settings cfg; + struct klsi_105_port_settings *cfg; unsigned long flags; speed_t baud; + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) { + dev_err(&port->dev, "%s - out of memory for config buffer.\n", + __func__); + return; + } + /* lock while we are modifying the settings */ spin_lock_irqsave(&priv->lock, flags); @@ -793,11 +817,11 @@ static void klsi_105_set_termios(struct tty_struct *tty, case CS5: dbg("%s - 5 bits/byte not supported", __func__); spin_unlock_irqrestore(&priv->lock, flags); - return ; + goto err; case CS6: dbg("%s - 6 bits/byte not supported", __func__); spin_unlock_irqrestore(&priv->lock, flags); - return ; + goto err; case CS7: priv->cfg.databits = kl5kusb105a_dtb_7; break; @@ -856,11 +880,13 @@ static void klsi_105_set_termios(struct tty_struct *tty, #endif ; } - memcpy(&cfg, &priv->cfg, sizeof(cfg)); + memcpy(cfg, &priv->cfg, sizeof(*cfg)); spin_unlock_irqrestore(&priv->lock, flags); /* now commit changes to device */ - klsi_105_chg_port_settings(port, &cfg); + klsi_105_chg_port_settings(port, cfg); +err: + kfree(cfg); } /* klsi_105_set_termios */ diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 45ea694b3ae6..c113a2a0e10c 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -86,7 +86,7 @@ static void kobil_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void kobil_init_termios(struct tty_struct *tty); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) }, { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) }, { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) }, @@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb) */ /* END DEBUG */ - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } @@ -624,7 +623,6 @@ static void kobil_set_termios(struct tty_struct *tty, unsigned short urb_val = 0; int c_cflag = tty->termios->c_cflag; speed_t speed; - void *settings; priv = usb_get_serial_port_data(port); if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || @@ -647,25 +645,13 @@ static void kobil_set_termios(struct tty_struct *tty, } urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit; - - settings = kzalloc(50, GFP_KERNEL); - if (!settings) - return; - - sprintf(settings, "%d ", speed); - if (c_cflag & PARENB) { - if (c_cflag & PARODD) { + if (c_cflag & PARODD) urb_val |= SUSBCR_SPASB_OddParity; - strcat(settings, "Odd Parity"); - } else { + else urb_val |= SUSBCR_SPASB_EvenParity; - strcat(settings, "Even Parity"); - } - } else { + } else urb_val |= SUSBCR_SPASB_NoParity; - strcat(settings, "No Parity"); - } tty->termios->c_cflag &= ~CMSPAR; tty_encode_baud_rate(tty, speed, speed); @@ -675,11 +661,10 @@ static void kobil_set_termios(struct tty_struct *tty, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, urb_val, 0, - settings, + NULL, 0, KOBIL_TIMEOUT ); - kfree(settings); } static int kobil_ioctl(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index cd009cb280a5..2849f8c32015 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -75,6 +75,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/uaccess.h> +#include <asm/unaligned.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "mct_u232.h" @@ -110,7 +111,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty); /* * All of the device info needed for the MCT USB-RS232 converter. */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, @@ -231,19 +232,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, static int mct_u232_set_baud_rate(struct tty_struct *tty, struct usb_serial *serial, struct usb_serial_port *port, speed_t value) { - __le32 divisor; + unsigned int divisor; int rc; - unsigned char zero_byte = 0; + unsigned char *buf; unsigned char cts_enable_byte = 0; speed_t speed; - divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, - &speed)); + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + divisor = mct_u232_calculate_baud_rate(serial, value, &speed); + put_unaligned_le32(cpu_to_le32(divisor), buf); rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_BAUD_RATE_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, + 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE, WDR_TIMEOUT); if (rc < 0) /*FIXME: What value speed results */ dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n", @@ -269,10 +273,11 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, a device which is not asserting 'CTS'. */ + buf[0] = 0; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_UNKNOWN1_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, + 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&port->dev, "Sending USB device request code %d " @@ -284,30 +289,40 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, dbg("set_baud_rate: send second control message, data = %02X", cts_enable_byte); + buf[0] = cts_enable_byte; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_CTS_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, + 0, 0, buf, MCT_U232_SET_CTS_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&port->dev, "Sending USB device request code %d " "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc); + kfree(buf); return rc; } /* mct_u232_set_baud_rate */ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) { int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + buf[0] = lcr; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_LINE_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, + 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&serial->dev->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); dbg("set_line_ctrl: 0x%x", lcr); + kfree(buf); return rc; } /* mct_u232_set_line_ctrl */ @@ -315,23 +330,31 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) { int rc; - unsigned char mcr = MCT_U232_MCR_NONE; + unsigned char mcr; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + mcr = MCT_U232_MCR_NONE; if (control_state & TIOCM_DTR) mcr |= MCT_U232_MCR_DTR; if (control_state & TIOCM_RTS) mcr |= MCT_U232_MCR_RTS; + buf[0] = mcr; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_MODEM_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, + 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&serial->dev->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); + kfree(buf); return rc; } /* mct_u232_set_modem_ctrl */ @@ -339,17 +362,27 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr) { int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) { + *msr = 0; + return -ENOMEM; + } rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCT_U232_GET_MODEM_STAT_REQUEST, MCT_U232_GET_REQUEST_TYPE, - 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, + 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, WDR_TIMEOUT); if (rc < 0) { dev_err(&serial->dev->dev, "Get MODEM STATus failed (error = %d)\n", rc); *msr = 0; + } else { + *msr = buf[0]; } dbg("get_modem_stat: 0x%x", *msr); + kfree(buf); return rc; } /* mct_u232_get_modem_stat */ diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index 07b6bec31dc8..7417d5ce1e23 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -73,6 +73,8 @@ #define MCT_U232_SET_CTS_REQUEST 12 #define MCT_U232_SET_CTS_SIZE 1 +#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */ + /* * Baud rate (divisor) * Actually, there are two of them, MCT website calls them "Philips solution" diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 763e32a44be0..0d47f2c4d59f 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -81,12 +81,15 @@ struct moschip_serial { static int debug; +static struct usb_serial_driver moschip7720_2port_driver; + #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 -static struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id moschip_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, { } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, moschip_port_id_table); @@ -106,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb) __u8 sp1; __u8 sp2; - dbg("%s", " : Entering\n"); + dbg(" : Entering"); switch (status) { case 0: @@ -186,6 +189,75 @@ exit: } /* + * mos7715_interrupt_callback + * this is the 7715's callback function for when we have received data on + * the interrupt endpoint. + */ +static void mos7715_interrupt_callback(struct urb *urb) +{ + int result; + int length; + int status = urb->status; + __u8 *data; + __u8 iir; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, + status); + return; + default: + dbg("%s - nonzero urb status received: %d", __func__, + status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Structure of data from 7715 device: + * Byte 1: IIR serial Port + * Byte 2: unused + * Byte 2: DSR parallel port + * Byte 4: FIFO status for both */ + + if (unlikely(length != 4)) { + dbg("Wrong data !!!"); + return; + } + + iir = data[0]; + if (!(iir & 0x01)) { /* serial port interrupt pending */ + switch (iir & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port: Receiver status error or address " + "bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port: Modem status change"); + break; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __func__, result); + return; +} + +/* * mos7720_bulk_in_callback * this is the callback function for when we have received data on the * bulk in endpoint. @@ -206,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) mos7720_port = urb->context; if (!mos7720_port) { - dbg("%s", "NULL mos7720_port pointer \n"); + dbg("NULL mos7720_port pointer"); return ; } @@ -218,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } @@ -275,17 +346,15 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) * this function will be used for sending command to device */ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, - __u16 index, void *data) + __u16 index, u8 *data) { int status; - unsigned int pipe; + u8 *buf; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - __u8 requesttype; - __u16 size = 0x0000; if (value < MOS_MAX_PORT) { if (product == MOSCHIP_DEVICE_ID_7715) - value = value*0x100+0x100; + value = 0x0200; /* identifies the 7715's serial port */ else value = value*0x100+0x200; } else { @@ -298,27 +367,58 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, } if (request == MOS_WRITE) { - request = (__u8)MOS_WRITE; - requesttype = (__u8)0x40; - value = value + (__u16)*((unsigned char *)data); - data = NULL; - pipe = usb_sndctrlpipe(serial->dev, 0); + value = value + *data; + status = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), MOS_WRITE, + 0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT); } else { - request = (__u8)MOS_READ; - requesttype = (__u8)0xC0; - size = 0x01; - pipe = usb_rcvctrlpipe(serial->dev, 0); + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + status = -ENOMEM; + goto out; + } + status = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MOS_READ, + 0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT); + *data = *buf; + kfree(buf); } - - status = usb_control_msg(serial->dev, pipe, request, requesttype, - value, index, data, size, MOS_WDR_TIMEOUT); - +out: if (status < 0) - dbg("Command Write failed Value %x index %x\n", value, index); + dbg("Command Write failed Value %x index %x", value, index); return status; } + +/* + * mos77xx_probe + * this function installs the appropriate read interrupt endpoint callback + * depending on whether the device is a 7720 or 7715, thus avoiding costly + * run-time checks in the high-frequency callback routine itself. + */ +static int mos77xx_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + if (id->idProduct == MOSCHIP_DEVICE_ID_7715) + moschip7720_2port_driver.read_int_callback = + mos7715_interrupt_callback; + else + moschip7720_2port_driver.read_int_callback = + mos7720_interrupt_callback; + + return 0; +} + +static int mos77xx_calc_num_ports(struct usb_serial *serial) +{ + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + if (product == MOSCHIP_DEVICE_ID_7715) + return 1; + + return 2; +} + static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial; @@ -390,7 +490,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) */ port_number = port->number - port->serial->minor; send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); - dbg("SS::%p LSR:%x\n", mos7720_port, data); + dbg("SS::%p LSR:%x", mos7720_port, data); dbg("Check:Sending Command .........."); @@ -729,7 +829,7 @@ static void mos7720_throttle(struct tty_struct *tty) struct moschip_port *mos7720_port; int status; - dbg("%s- port %d\n", __func__, port->number); + dbg("%s- port %d", __func__, port->number); mos7720_port = usb_get_serial_port_data(port); @@ -1208,7 +1308,7 @@ static void mos7720_set_termios(struct tty_struct *tty, return; } - dbg("%s\n", "setting termios - ASPIRE"); + dbg("setting termios - ASPIRE"); cflag = tty->termios->c_cflag; @@ -1226,7 +1326,7 @@ static void mos7720_set_termios(struct tty_struct *tty, change_port_settings(tty, mos7720_port, old_termios); if (!port->read_urb) { - dbg("%s", "URB KILLED !!!!!\n"); + dbg("URB KILLED !!!!!"); return; } @@ -1495,6 +1595,7 @@ static int mos7720_startup(struct usb_serial *serial) struct usb_device *dev; int i; char data; + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); dbg("%s: Entering ..........", __func__); @@ -1514,6 +1615,29 @@ static int mos7720_startup(struct usb_serial *serial) usb_set_serial_data(serial, mos7720_serial); + /* + * The 7715 uses the first bulk in/out endpoint pair for the parallel + * port, and the second for the serial port. Because the usbserial core + * assumes both pairs are serial ports, we must engage in a bit of + * subterfuge and swap the pointers for ports 0 and 1 in order to make + * port 0 point to the serial port. However, both moschip devices use a + * single interrupt-in endpoint for both ports (as mentioned a little + * further down), and this endpoint was assigned to port 0. So after + * the swap, we must copy the interrupt endpoint elements from port 1 + * (as newly assigned) to port 0, and null out port 1 pointers. + */ + if (product == MOSCHIP_DEVICE_ID_7715) { + struct usb_serial_port *tmp = serial->port[0]; + serial->port[0] = serial->port[1]; + serial->port[1] = tmp; + serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb; + serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer; + serial->port[0]->interrupt_in_endpointAddress = + tmp->interrupt_in_endpointAddress; + serial->port[1]->interrupt_in_urb = NULL; + serial->port[1]->interrupt_in_buffer = NULL; + } + /* we set up the pointers to the endpoints in the mos7720_open * * function, as the structures aren't created yet. */ @@ -1529,7 +1653,7 @@ static int mos7720_startup(struct usb_serial *serial) /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt endpoint - * comman to all ports */ + * common to all ports */ serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; @@ -1584,11 +1708,12 @@ static struct usb_serial_driver moschip7720_2port_driver = { .description = "Moschip 2 port adapter", .usb_driver = &usb_driver, .id_table = moschip_port_id_table, - .num_ports = 2, + .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, + .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .ioctl = mos7720_ioctl, @@ -1600,7 +1725,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = mos7720_interrupt_callback, + .read_int_callback = NULL /* dynamically assigned in probe() */ }; static int __init moschip7720_init(void) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2cfe2451ed97..2fda1c0182b7 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -181,7 +181,7 @@ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ -static struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, @@ -198,7 +198,7 @@ static struct usb_device_id moschip_port_id_table[] = { {} /* terminating entry */ }; -static __devinitdata struct usb_device_id moschip_id_table_combined[] = { +static const struct usb_device_id moschip_id_table_combined[] __devinitconst = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, @@ -283,12 +283,19 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, { struct usb_device *dev = port->serial->dev; int ret = 0; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, - MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, + MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + *val = buf[0]; dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val); - *val = (*val) & 0x00ff; + + kfree(buf); return ret; } @@ -341,6 +348,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, struct usb_device *dev = port->serial->dev; int ret = 0; __u16 Wval; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; /* dbg("application number is %4x", (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ @@ -364,9 +376,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, } } ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, - MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH, + MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); - *val = (*val) & 0x00ff; + *val = buf[0]; + + kfree(buf); return ret; } @@ -750,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb) if (urb->actual_length) { tty = tty_port_tty_get(&mos7840_port->port->port); if (tty) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); dbg(" %s ", data); tty_flip_buffer_push(tty); diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 99bd00f5188a..cf1718394e18 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -21,7 +21,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 5ceaa4c6be09..04a6cbbed2c0 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -22,7 +22,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ { }, }; @@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 062265038bf0..89c724c0ac0a 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -75,7 +75,7 @@ static void omninet_disconnect(struct usb_serial *serial); static void omninet_release(struct usb_serial *serial); static int omninet_attach(struct usb_serial *serial); -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ @@ -218,8 +218,8 @@ static void omninet_read_bulk_callback(struct urb *urb) if (debug && header->oh_xxx != 0x30) { if (urb->actual_length) { - printk(KERN_DEBUG __FILE__ - ": omninet_read %d: ", header->oh_len); + printk(KERN_DEBUG "%s: omninet_read %d: ", + __FILE__, header->oh_len); for (i = 0; i < (header->oh_len + OMNINET_HEADERLEN); i++) printk("%.2x ", data[i]); @@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s - port %0x\n", __func__, port->number); + dbg("%s - port %0x", __func__, port->number); port->write_urb_busy = 0; if (status) { diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4cdb975caa89..701452ae9197 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -22,7 +22,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, { }, }; @@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; int result; - int available_room = 0; int data_length; dbg("%s - port %d", __func__, port->number); @@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb) /* real data, send it to the tty layer */ tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - data_length); - if (available_room) { - tty_insert_flip_string(tty, data, - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data, + data_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } else { @@ -120,7 +115,7 @@ static void opticon_bulk_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } @@ -217,7 +212,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->outstanding_urbs++; @@ -288,7 +283,7 @@ static int opticon_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e94a6711f08..847b805d63a3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -336,15 +336,42 @@ static int option_resume(struct usb_serial *serial); #define AIRPLUS_VENDOR_ID 0x1011 #define AIRPLUS_PRODUCT_MCD650 0x3198 +/* Longcheer/Longsung vendor ID; makes whitelabel devices that + * many other vendors like 4G Systems, Alcatel, ChinaBird, + * Mobidata, etc sell under their own brand names. + */ +#define LONGCHEER_VENDOR_ID 0x1c9e + /* 4G Systems products */ -#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e +/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * + * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 /* Haier products */ #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 -static struct usb_device_id option_ids[] = { +/* some devices interfaces need special handling due to a number of reasons */ +enum option_blacklist_reason { + OPTION_BLACKLIST_NONE = 0, + OPTION_BLACKLIST_SENDSETUP = 1, + OPTION_BLACKLIST_RESERVED_IF = 2 +}; + +struct option_blacklist_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ + enum option_blacklist_reason reason; +}; + +static const u8 four_g_w14_no_sendsetup[] = { 0, 1 }; +static const struct option_blacklist_info four_g_w14_blacklist = { + .infolen = ARRAY_SIZE(four_g_w14_no_sendsetup), + .ifaceinfo = four_g_w14_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + +static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) }, @@ -644,7 +671,9 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, - { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), + .driver_info = (kernel_ulong_t)&four_g_w14_blacklist + }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; @@ -709,6 +738,7 @@ struct option_intf_private { spinlock_t susp_lock; unsigned int suspended:1; int in_flight; + struct option_blacklist_info *blacklist_info; }; struct option_port_private { @@ -778,9 +808,27 @@ static int option_probe(struct usb_serial *serial, if (!data) return -ENOMEM; spin_lock_init(&data->susp_lock); + data->blacklist_info = (struct option_blacklist_info*) id->driver_info; return 0; } +static enum option_blacklist_reason is_blacklisted(const u8 ifnum, + const struct option_blacklist_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return blacklist->reason; + } + } + return OPTION_BLACKLIST_NONE; +} + static void option_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -921,7 +969,6 @@ static void option_indat_callback(struct urb *urb) } else { tty = tty_port_tty_get(&port->port); if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } else @@ -929,9 +976,9 @@ static void option_indat_callback(struct urb *urb) tty_kref_put(tty); /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN) { + if (status != -ESHUTDOWN) { err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) printk(KERN_ERR "%s: resubmit read urb failed. " "(%d)", __func__, err); else @@ -985,7 +1032,7 @@ static void option_instat_callback(struct urb *urb) (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt\n", __func__); + dbg("%s: NULL req_pkt", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -1211,11 +1258,19 @@ static void option_setup_urbs(struct usb_serial *serial) static int option_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + struct option_intf_private *intfdata = + (struct option_intf_private *) serial->private; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; int val = 0; dbg("%s", __func__); + if (is_blacklisted(ifNum, intfdata->blacklist_info) == + OPTION_BLACKLIST_SENDSETUP) { + dbg("No send_setup on blacklisted interface #%d\n", ifNum); + return -EIO; + } + portdata = usb_get_serial_port_data(port); if (portdata->dtr_state) @@ -1401,7 +1456,7 @@ static int option_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port->interrupt_in_urb) { - dbg("%s: No interrupt URB for port %d\n", __func__, i); + dbg("%s: No interrupt URB for port %d", __func__, i); continue; } err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index c644e26394b4..deeacdea05db 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -58,7 +58,7 @@ #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" #define OTI6858_VERSION "0.1" -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, { } }; @@ -302,7 +302,7 @@ void send_data(struct work_struct *work) struct usb_serial_port *port = priv->port; int count = 0, result; unsigned long flags; - unsigned char allow; + u8 *allow; dbg("%s(port = %d)", __func__, port->number); @@ -321,13 +321,20 @@ void send_data(struct work_struct *work) count = port->bulk_out_size; if (count != 0) { + allow = kmalloc(1, GFP_KERNEL); + if (!allow) { + dev_err(&port->dev, "%s(): kmalloc failed\n", + __func__); + return; + } result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), OTI6858_REQ_T_CHECK_TXBUFF, OTI6858_REQ_CHECK_TXBUFF, - count, 0, &allow, 1, 100); - if (result != 1 || allow != 0) + count, 0, allow, 1, 100); + if (result != 1 || *allow != 0) count = 0; + kfree(allow); } if (count == 0) { @@ -578,9 +585,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); - if (port->port.count != 1) - return 0; - buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); if (buf == NULL) { dev_err(&port->dev, "%s(): out of memory!\n", __func__); @@ -927,10 +931,6 @@ static void oti6858_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); if (status != 0) { - if (!port->port.count) { - dbg("%s(): port is closed, exiting", __func__); - return; - } /* if (status == -EPROTO) { * PL2303 mysteriously fails with -EPROTO reschedule @@ -954,14 +954,12 @@ static void oti6858_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); - /* schedule the interrupt urb if we are still open */ - if (port->port.count != 0) { - port->interrupt_in_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed," - " error %d\n", __func__, result); - } + /* schedule the interrupt urb */ + port->interrupt_in_urb->dev = port->serial->dev; + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result != 0 && result != -EPERM) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed," + " error %d\n", __func__, result); } } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9ec1a49e2362..73d5f346d3e0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -50,7 +50,7 @@ struct pl2303_buf { char *buf_put; }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, @@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port) port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count; - port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting write urb," @@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) pl2303_set_termios(tty, port, &tmp_termios); dbg("%s - submitting read urb", __func__); - port->read_urb->dev = serial->dev; result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb," @@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) } dbg("%s - submitting interrupt urb", __func__); - port->interrupt_in_urb->dev = serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -895,10 +892,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) static int pl2303_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { + case TIOCGSERIAL: + memset(&ser, 0, sizeof ser); + ser.type = PORT_16654; + ser.line = port->serial->minor; + ser.port = port->number; + ser.baud_base = 460800; + + if (copy_to_user((void __user *)arg, &ser, sizeof ser)) + return -EFAULT; + + return 0; + case TIOCMIWAIT: dbg("%s (%d) TIOCMIWAIT", __func__, port->number); return wait_modem_info(port, arg); @@ -1042,7 +1052,6 @@ static void pl2303_push_data(struct tty_struct *tty, tty_flag = TTY_FRAME; dbg("%s - tty_flag = %d", __func__, tty_flag); - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -1072,16 +1081,11 @@ static void pl2303_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->port.count) { - dbg("%s - port is closed, exiting.", __func__); - return; - } if (status == -EPROTO) { /* PL2303 mysteriously fails with -EPROTO reschedule * the read */ dbg("%s - caught -EPROTO, resubmitting the urb", __func__); - urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed" @@ -1108,15 +1112,10 @@ static void pl2303_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - urb->dev = port->serial->dev; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting" - " read urb, error %d\n", __func__, result); - } - - return; + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result && result != -EPERM) + dev_err(&urb->dev->dev, "%s - failed resubmitting" + " read urb, error %d\n", __func__, result); } static void pl2303_write_bulk_callback(struct urb *urb) @@ -1146,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb) dbg("%s - nonzero write bulk status received: %d", __func__, status); port->write_urb->transfer_buffer_length = 1; - port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting write" diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c new file mode 100644 index 000000000000..0b9362061713 --- /dev/null +++ b/drivers/usb/serial/qcaux.c @@ -0,0 +1,96 @@ +/* + * Qualcomm USB Auxiliary Serial Port driver + * + * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2010 Dan Williams <dcbw@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Devices listed here usually provide a CDC ACM port on which normal modem + * AT commands and PPP can be used. But when that port is in-use by PPP it + * cannot be used simultaneously for status or signal strength. Instead, the + * ports here can be queried for that information using the Qualcomm DM + * protocol. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port + * for normal AT commands, but also provide secondary USB interfaces for the + * QCDM-capable ports. Devices that do not provide a CDC-ACM port should + * probably be driven by option.ko. + */ + +/* UTStarcom/Pantech/Curitel devices */ +#define UTSTARCOM_VENDOR_ID 0x106c +#define UTSTARCOM_PRODUCT_PC5740 0x3701 +#define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */ +#define UTSTARCOM_PRODUCT_UM150 0x3711 +#define UTSTARCOM_PRODUCT_UM175_V1 0x3712 +#define UTSTARCOM_PRODUCT_UM175_V2 0x3714 +#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 + +/* CMOTECH devices */ +#define CMOTECH_VENDOR_ID 0x16d8 +#define CMOTECH_PRODUCT_CDU550 0x5553 +#define CMOTECH_PRODUCT_CDX650 0x6512 + +static struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver qcaux_driver = { + .name = "qcaux", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver qcaux_device = { + .driver = { + .owner = THIS_MODULE, + .name = "qcaux", + }, + .id_table = id_table, + .num_ports = 1, +}; + +static int __init qcaux_init(void) +{ + int retval; + + retval = usb_serial_register(&qcaux_device); + if (retval) + return retval; + retval = usb_register(&qcaux_driver); + if (retval) + usb_serial_deregister(&qcaux_device); + return retval; +} + +static void __exit qcaux_exit(void) +{ + usb_deregister(&qcaux_driver); + usb_serial_deregister(&qcaux_device); +} + +module_init(qcaux_init); +module_exit(qcaux_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 7528b8d57f1c..310ff6ec6567 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -21,7 +21,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index 951ea0c6ba77..cb8195cabfde 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -22,7 +22,7 @@ #define DRIVER_DESC "Driver for Siemens USB/MPI adapter" -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { /* Vendor and product id for 6ES7-972-0CB20-0XA0 */ { USB_DEVICE(0x908, 0x0004) }, { }, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3eb6143bb646..34e6f894cba9 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -226,7 +226,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = { .ifaceinfo = direct_ip_non_serial_ifaces, }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */ @@ -304,16 +304,6 @@ static struct usb_device_id id_table [] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver sierra_driver = { - .name = "sierra", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .id_table = id_table, - .no_dynamic_id = 1, - .supports_autosuspend = 1, -}; struct sierra_port_private { spinlock_t lock; /* lock the structure */ @@ -477,7 +467,7 @@ static void sierra_outdat_callback(struct urb *urb) static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { - struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_port_private *portdata; struct sierra_intf_private *intfdata; struct usb_serial *serial = port->serial; unsigned long flags; @@ -604,14 +594,15 @@ static void sierra_indat_callback(struct urb *urb) } else { if (urb->actual_length) { tty = tty_port_tty_get(&port->port); - - tty_buffer_request_room(tty, urb->actual_length); - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - - tty_kref_put(tty); - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + if (tty) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + + tty_kref_put(tty); + usb_serial_debug_data(debug, &port->dev, + __func__, urb->actual_length, data); + } } else { dev_dbg(&port->dev, "%s: empty read urb" " received\n", __func__); @@ -619,10 +610,10 @@ static void sierra_indat_callback(struct urb *urb) } /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { + if (status != -ESHUTDOWN && status != -EPERM) { usb_mark_last_busy(port->serial->dev); err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) dev_err(&port->dev, "resubmit read urb failed." "(%d)\n", err); } @@ -681,11 +672,11 @@ static void sierra_instat_callback(struct urb *urb) dev_dbg(&port->dev, "%s: error %d\n", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ - if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { + if (status != -ESHUTDOWN && status != -ENOENT) { usb_mark_last_busy(serial->dev); urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) dev_err(&port->dev, "%s: resubmit intr urb " "failed. (%d)\n", __func__, err); } @@ -1061,11 +1052,31 @@ static int sierra_resume(struct usb_serial *serial) return ec ? -EIO : 0; } + +static int sierra_reset_resume(struct usb_interface *intf) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + dev_err(&serial->dev->dev, "%s\n", __func__); + return usb_serial_resume(intf); +} #else #define sierra_suspend NULL #define sierra_resume NULL +#define sierra_reset_resume NULL #endif +static struct usb_driver sierra_driver = { + .name = "sierra", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .reset_resume = sierra_reset_resume, + .id_table = id_table, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + static struct usb_serial_driver sierra_device = { .driver = { .owner = THIS_MODULE, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 1e58220403d1..5d39191e7244 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -45,7 +45,7 @@ static int debug; #define SPCP8x5_835_VID 0x04fc #define SPCP8x5_835_PID 0x0231 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, @@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (i < 0) dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", uartdata, i); - dbg("0x21:0x40:0:0 %d\n", i); + dbg("0x21:0x40:0:0 %d", i); if (cflag & CRTSCTS) { /* enable hardware flow control */ @@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; - int i; int result = urb->status; u8 status; char tty_flag; @@ -687,8 +686,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) /* check the urb status */ if (result) { - if (!port->port.count) - return; if (result == -EPROTO) { /* spcp8x5 mysteriously fails with -EPROTO */ /* reschedule the read */ @@ -726,26 +723,20 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); - for (i = 0; i < urb->actual_length; ++i) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_string_fixed_flag(tty, data, + urb->actual_length, tty_flag); tty_flip_buffer_push(tty); } tty_kref_put(tty); - /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - urb->dev = port->serial->dev; - result = usb_submit_urb(urb , GFP_ATOMIC); - if (result) - dev_dbg(&port->dev, "failed submitting read urb %d\n", - result); - } - - return; + /* Schedule the next read */ + urb->dev = port->serial->dev; + result = usb_submit_urb(urb , GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, "failed submitting read urb %d\n", result); } /* get data from ring buffer and then write to usb bus */ diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index b282c0f2d8e5..ee190cc1757c 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -21,7 +21,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, { }, }; @@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; int result; - int available_room = 0; int data_length; dbg("%s - port %d", __func__, port->number); @@ -89,18 +88,13 @@ static void symbol_int_callback(struct urb *urb) */ tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - data_length); - if (available_room) { - tty_insert_flip_string(tty, &data[1], - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, &data[1], data_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 1e9dc8821698..0afe5c71c17e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty, int cnt; do { - cnt = tty_buffer_request_room(tty, length); + cnt = tty_insert_flip_string(tty, data, length); if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); if (cnt == 0) break; } - tty_insert_flip_string(tty, data, cnt); tty_flip_buffer_push(tty); data += cnt; length -= cnt; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 33c85f7084f8..3873660d8217 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -358,10 +358,6 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - /* count is managed under the mutex lock for the tty so cannot - drop to zero until after the last close completes */ - WARN_ON(!port->port.count); - /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); @@ -373,7 +369,6 @@ static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ return port->serial->type->write_room(tty); } @@ -381,7 +376,7 @@ static int serial_write_room(struct tty_struct *tty) static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s = port %d", __func__, port->number); + dbg("%s - port %d", __func__, port->number); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ @@ -396,7 +391,6 @@ static void serial_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) port->serial->type->throttle(tty); @@ -407,7 +401,6 @@ static void serial_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) port->serial->type->unthrottle(tty); @@ -421,8 +414,6 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file, dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - WARN_ON(!port->port.count); - /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->ioctl) { @@ -437,7 +428,6 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->set_termios) @@ -452,7 +442,6 @@ static int serial_break(struct tty_struct *tty, int break_state) dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->break_ctl) @@ -513,7 +502,6 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty, file); return -EINVAL; @@ -526,7 +514,6 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, file, set, clear); return -EINVAL; diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index 7b5bfc4edd3d..252cc2d993b2 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -29,7 +29,7 @@ static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = { 0xff, }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0525, 0x127a) }, { }, }; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index ad1f9232292d..094942707c7d 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->outstanding_urbs++; @@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb) if (urb->actual_length) { tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - urb->actual_length); - if (available_room) { - tty_insert_flip_string(tty, data, - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } spin_lock(&priv->lock); @@ -807,10 +803,14 @@ static int clie_3_5_startup(struct usb_serial *serial) { struct device *dev = &serial->dev->dev; int result; - u8 data; + u8 *data; dbg("%s", __func__); + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + /* * Note that PEG-300 series devices expect the following two calls. */ @@ -818,36 +818,42 @@ static int clie_3_5_startup(struct usb_serial *serial) /* get the config number */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_CONFIGURATION, USB_DIR_IN, - 0, 0, &data, 1, 3000); + 0, 0, data, 1, 3000); if (result < 0) { dev_err(dev, "%s: get config number failed: %d\n", __func__, result); - return result; + goto out; } if (result != 1) { dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result); - return -EIO; + result = -EIO; + goto out; } /* get the interface number */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_INTERFACE, USB_DIR_IN | USB_RECIP_INTERFACE, - 0, 0, &data, 1, 3000); + 0, 0, data, 1, 3000); if (result < 0) { dev_err(dev, "%s: get interface number failed: %d\n", __func__, result); - return result; + goto out; } if (result != 1) { dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result); - return -EIO; + result = -EIO; + goto out; } - return generic_startup(serial); + result = generic_startup(serial); +out: + kfree(data); + + return result; } static int treo_attach(struct usb_serial *serial) diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c new file mode 100644 index 000000000000..f719d00972fc --- /dev/null +++ b/drivers/usb/serial/vivopay-serial.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2009 Outpost Embedded, LLC + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + + +#define DRIVER_VERSION "v1.0" +#define DRIVER_DESC "ViVOpay USB Serial Driver" + +#define VIVOPAY_VENDOR_ID 0x1d5f + + +static struct usb_device_id id_table [] = { + /* ViVOpay 8800 */ + { USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver vivopay_serial_driver = { + .name = "vivopay-serial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver vivopay_serial_device = { + .driver = { + .owner = THIS_MODULE, + .name = "vivopay-serial", + }, + .id_table = id_table, + .usb_driver = &vivopay_serial_driver, + .num_ports = 1, +}; + +static int __init vivopay_serial_init(void) +{ + int retval; + retval = usb_serial_register(&vivopay_serial_device); + if (retval) + goto failed_usb_serial_register; + retval = usb_register(&vivopay_serial_driver); + if (retval) + goto failed_usb_register; + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + return 0; +failed_usb_register: + usb_serial_deregister(&vivopay_serial_device); +failed_usb_serial_register: + return retval; +} + +static void __exit vivopay_serial_exit(void) +{ + usb_deregister(&vivopay_serial_driver); + usb_serial_deregister(&vivopay_serial_device); +} + +module_init(vivopay_serial_init); +module_exit(vivopay_serial_exit); + +MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 1093d2eb046a..12ed8209ca72 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -111,17 +111,17 @@ static int debug; separate ID tables, and then a third table that combines them just for the purpose of exporting the autoloading information. */ -static struct usb_device_id id_table_std [] = { +static const struct usb_device_id id_table_std[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_prerenumeration [] = { +static const struct usb_device_id id_table_prerenumeration[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ @@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work) wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; - if (tty && urb->actual_length) { - int len = tty_buffer_request_room(tty, - urb->actual_length); - /* This stuff can go away now I suspect */ - if (unlikely(len < urb->actual_length)) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urb_q); - spin_unlock_irqrestore(&info->lock, flags); - tty_flip_buffer_push(tty); - schedule_work(&info->rx_work); - goto out; - } - tty_insert_flip_string(tty, urb->transfer_buffer, len); - sent += len; - } + if (tty && urb->actual_length) + sent += tty_insert_flip_string(tty, + urb->transfer_buffer, urb->actual_length); urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 80e65f29921c..198bb3ed95b2 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -202,7 +202,7 @@ static int onetouch_connect_input(struct us_data *ss) goto fail1; onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, - GFP_ATOMIC, &onetouch->data_dma); + GFP_KERNEL, &onetouch->data_dma); if (!onetouch->data) goto fail1; diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index e5e6df39e737..4cc035562cc2 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -133,15 +133,15 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; - if (queue_max_sectors(sdev->request_queue) > max_sectors) - blk_queue_max_sectors(sdev->request_queue, + if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) + blk_queue_max_hw_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { /* Tapes need much higher max_sector limits, so just * raise it to the maximum possible (4 GB / 512) and * let the queue segment size sort out the real limit. */ - blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF); + blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); } /* Some USB host controllers can't do DMA; they have to use PIO. @@ -484,7 +484,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att { struct scsi_device *sdev = to_scsi_device(dev); - return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue)); + return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue)); } /* Input routine for the sysfs max_sectors file */ @@ -494,9 +494,9 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at struct scsi_device *sdev = to_scsi_device(dev); unsigned short ms; - if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) { - blk_queue_max_sectors(sdev->request_queue, ms); - return strlen(buf); + if (sscanf(buf, "%hu", &ms) > 0) { + blk_queue_max_hw_sectors(sdev->request_queue, ms); + return count; } return -EINVAL; } @@ -539,7 +539,7 @@ struct scsi_host_template usb_stor_host_template = { .slave_configure = slave_configure, /* lots of sg segments can be handled */ - .sg_tablesize = SG_ALL, + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, /* limit the total size of a transfer to 120 KB */ .max_sectors = 240, diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index b62a28814ebe..bd3f415893d8 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1628,10 +1628,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_ERROR; } - if ( (result = usbat_multiple_write(us, - registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) { + result = usbat_multiple_write(us, registers, data, 7); + + if (result != USB_STOR_TRANSPORT_GOOD) return result; - } /* * Write the 12-byte command header. @@ -1643,12 +1643,11 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) * AT SPEED 4 IS UNRELIABLE!!! */ - if ((result = usbat_write_block(us, - USBAT_ATA, srb->cmnd, 12, - (srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) != - USB_STOR_TRANSPORT_GOOD)) { + result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, + srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0); + + if (result != USB_STOR_TRANSPORT_GOOD) return result; - } /* If there is response data to be read in then do it here. */ diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index cc313d16d727..468038126e5e 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -47,6 +47,8 @@ #include <linux/errno.h> #include <linux/slab.h> +#include <linux/usb/quirks.h> + #include <scsi/scsi.h> #include <scsi/scsi_eh.h> #include <scsi/scsi_device.h> @@ -1297,6 +1299,10 @@ int usb_stor_port_reset(struct us_data *us) { int result; + /*for these devices we must use the class specific method */ + if (us->pusb_dev->quirks & USB_QUIRK_RESET_MORPHS) + return -EPERM; + result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); if (result < 0) US_DEBUGP("unable to lock device for reset: %d\n", result); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 49575fba3756..98b549b1cab2 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1147,8 +1147,8 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, 0 ), /* Reported by Jan Dumon <j.dumon@option.com> - * This device (wrongly) has a vendor-specific device descriptor. - * The entry is needed so usb-storage can bind to it's mass-storage + * These devices (wrongly) have a vendor-specific device descriptor. + * These entries are needed so usb-storage can bind to their mass-storage * interface as an interface driver */ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, "Option", @@ -1156,6 +1156,90 @@ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, 0 ), +UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000, + "Option", + "GI 0452 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, + "Option", + "GI 070x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000, + "Option", + "GI 1509 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000, + "Option", + "GI 1515 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000, + "Option", + "GI 1215 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + /* Reported by Ben Efros <ben@pc-doctor.com> */ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, "Seagate", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index e9f995486ec1..bbeeb92a2131 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -78,7 +78,7 @@ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); MODULE_LICENSE("GPL"); -static unsigned int delay_use = 5; +static unsigned int delay_use = 1; module_param(delay_use, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b1e579c5c97c..61522787f39c 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -28,7 +28,7 @@ #define USB_SKEL_PRODUCT_ID 0xfff0 /* table of devices that work with this driver */ -static struct usb_device_id skel_table[] = { +static const struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index 25eae405f622..51a8e0d5789d 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -641,7 +641,7 @@ static void cbaf_disconnect(struct usb_interface *iface) kzfree(cbaf); } -static struct usb_device_id cbaf_id_table[] = { +static const struct usb_device_id cbaf_id_table[] = { { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, { }, }; diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index dced419f7aba..1c918286159c 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -868,7 +868,7 @@ static struct usb_wireless_cap_descriptor wusb_cap_descr_default = { * reference that we'll drop. * * First we need to determine if the device is a WUSB device (else we - * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE) + * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS) * [FIXME: maybe we'd need something more definitive]. If so, we track * it's usb_busd and from there, the WUSB HC. * diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c index 3b52161e6e9c..2d827397e30b 100644 --- a/drivers/usb/wusbcore/mmc.c +++ b/drivers/usb/wusbcore/mmc.c @@ -263,7 +263,7 @@ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) { int result = 0; - if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0) + if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0) chid = NULL; mutex_lock(&wusbhc->mutex); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index fd2fd4e277e1..759cda55f7c3 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -198,7 +198,7 @@ struct wusb_port { * ports) this HC will take. Read-only. * * @port Array of port status for each fake root port. Guaranteed to - * always be the same lenght during device existence + * always be the same length during device existence * [this allows for some unlocked but referenced reading]. * * @mmcies_max Max number of Information Elements this HC can send |