diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/usb/class/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 90 | ||||
| -rw-r--r-- | drivers/usb/image/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/misc/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/serial/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/usb/storage/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/usb/usbip/Kconfig | 14 |
9 files changed, 82 insertions, 82 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 275568abc670..26475b409b53 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -30,7 +30,7 @@ menuconfig USB_SUPPORT bool "USB support" depends on HAS_IOMEM default y - ---help--- + help This option adds core support for Universal Serial Bus (USB). You will also need drivers from the following menu to make use of it. @@ -47,7 +47,7 @@ config USB select GENERIC_ALLOCATOR select USB_COMMON select NLS # for UTF-8 strings - ---help--- + help Universal Serial Bus (USB) is a specification for a serial bus subsystem which offers higher speeds and more features than the traditional PC serial port. The bus supplies power to peripherals @@ -83,7 +83,7 @@ config USB_PCI bool "PCI based USB host interface" depends on PCI default y - ---help--- + help Many embedded system SOCs (e.g. freescale T2080) have both PCI and USB modules with the USB module directly controlled by registers and having no relationship to the PCI module. @@ -133,7 +133,7 @@ config USB_USS720 tristate "USS720 parport driver" depends on PARPORT select PARPORT_NOT_PC - ---help--- + help This driver is for USB parallel port adapters that use the Lucent Technologies USS-720 chip. These cables are plugged into your USB port and provide USB compatibility to peripherals designed with diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index f8a798900093..d3f5162bd67e 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -7,7 +7,7 @@ comment "USB Device Class drivers" config USB_ACM tristate "USB Modem (CDC ACM) support" depends on TTY - ---help--- + help This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. Please read <file:Documentation/usb/acm.rst> for details. @@ -30,7 +30,7 @@ config USB_PRINTER config USB_WDM tristate "USB Wireless Device Management support" - ---help--- + help This driver supports the WMC Device Management functionality of cell phones compliant to the CDC WMC specification. You can use AT commands over this device. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 62c348062e48..1cb3004ea7b2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -20,7 +20,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -31,7 +31,7 @@ if USB_XHCI_HCD config USB_XHCI_DBGCAP bool "xHCI support for debug capability" depends on TTY - ---help--- + help Say 'Y' to enable the support for the xHCI debug capability. Make sure that your xHCI host supports the extended debug capability and you want a TTY serial device based on the xHCI debug capability @@ -45,7 +45,7 @@ config USB_XHCI_PCI config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - ---help--- + help Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device and installed on your system for this device to work. @@ -54,7 +54,7 @@ config USB_XHCI_PCI_RENESAS config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" select USB_XHCI_RCAR if ARCH_RENESAS - ---help--- + help Adds an xHCI host driver for a generic platform device, which provides a memory space and an irq. It is also a prerequisite for platform specific drivers that @@ -73,7 +73,7 @@ config USB_XHCI_MTK tristate "xHCI support for MediaTek SoCs" select MFD_SYSCON depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help Say 'Y' to enable the support for the xHCI host controller found in MediaTek SoCs. If unsure, say N. @@ -83,7 +83,7 @@ config USB_XHCI_MVEBU select USB_XHCI_PLATFORM depends on HAS_IOMEM depends on ARCH_MVEBU || COMPILE_TEST - ---help--- + help Say 'Y' to enable the support for the xHCI host controller found in Marvell Armada 375/38x/37xx ARM SOCs. @@ -91,7 +91,7 @@ config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" depends on USB_XHCI_PLATFORM depends on ARCH_RENESAS || COMPILE_TEST - ---help--- + help Say 'Y' to enable the support for the xHCI host controller found in Renesas R-Car ARM SoCs. @@ -100,7 +100,7 @@ config USB_XHCI_TEGRA depends on PHY_TEGRA_XUSB depends on RESET_CONTROLLER select FW_LOADER - ---help--- + help Say 'Y' to enable the support for the xHCI host controller found in NVIDIA Tegra124 and later SoCs. @@ -129,7 +129,7 @@ config USB_BRCMSTB config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to @@ -151,7 +151,7 @@ config USB_EHCI_HCD config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" depends on USB_EHCI_HCD - ---help--- + help Some EHCI chips have vendor-specific extensions to integrate transaction translators, so that no OHCI or UHCI companion controller is needed. It's safe to say "y" even if your @@ -164,7 +164,7 @@ config USB_EHCI_TT_NEWSCHED bool "Improved Transaction Translator scheduling" depends on USB_EHCI_HCD default y - ---help--- + help This changes the periodic scheduling code to fill more of the low and full speed bandwidth available from the Transaction Translator (TT) in USB 2.0 hubs. Without this, only one transfer will be @@ -192,7 +192,7 @@ config USB_EHCI_HCD_PMC_MSP depends on MSP_HAS_USB select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO - ---help--- + help Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. If unsure, say N. @@ -201,7 +201,7 @@ config XPS_USB_HCD_XILINX depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO - ---help--- + help Xilinx xps USB host controller core is EHCI compliant and has transaction translator built-in. It can be configured to either support both high speed and full speed devices, or high speed @@ -210,14 +210,14 @@ config XPS_USB_HCD_XILINX config USB_EHCI_FSL tristate "Support for Freescale on-chip EHCI USB controller" select USB_EHCI_ROOT_HUB_TT - ---help--- + help Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" depends on ARCH_MXC || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT - ---help--- + help Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_NPCM7XX @@ -233,7 +233,7 @@ config USB_EHCI_HCD_OMAP depends on ARCH_OMAP depends on NOP_USB_XCEIV default y - ---help--- + help Enables support for the on-chip EHCI controller on OMAP3 and later chips. @@ -241,7 +241,7 @@ config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST) default y if (PLAT_ORION || ARCH_MVEBU) - ---help--- + help Enables support for the on-chip EHCI controller on Marvell's embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, Armada 370. This is different from the EHCI implementation @@ -252,7 +252,7 @@ config USB_EHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip EHCI USB controller" depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) default y if PLAT_SPEAR - ---help--- + help Enables support for the on-chip EHCI controller on ST SPEAr chips. @@ -269,7 +269,7 @@ config USB_EHCI_HCD_AT91 tristate "Support for Atmel on-chip EHCI USB controller" depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST) default y if ARCH_AT91 - ---help--- + help Enables support for the on-chip EHCI controller on Atmel chips. @@ -286,14 +286,14 @@ config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" depends on PPC default y - ---help--- + help Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. config USB_EHCI_SH bool "EHCI support for SuperH USB controller" depends on SUPERH || COMPILE_TEST - ---help--- + help Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. @@ -307,7 +307,7 @@ config USB_EHCI_MV tristate "EHCI support for Marvell PXA/MMP USB controller" depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT - ---help--- + help Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. @@ -320,7 +320,7 @@ config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on ARCH_CNS3XXX || COMPILE_TEST select USB_EHCI_HCD_PLATFORM - ---help--- + help This option is deprecated now and the driver was removed, use USB_EHCI_HCD_PLATFORM instead. @@ -330,7 +330,7 @@ config USB_CNS3XXX_EHCI config USB_EHCI_HCD_PLATFORM tristate "Generic EHCI driver for a platform device" - ---help--- + help Adds an EHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -355,7 +355,7 @@ endif # USB_EHCI_HCD config USB_OXU210HP_HCD tristate "OXU210HP HCD support" depends on HAS_IOMEM - ---help--- + help The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -368,7 +368,7 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" depends on HAS_IOMEM - ---help--- + help The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -381,7 +381,7 @@ config USB_ISP1362_HCD tristate "ISP1362 HCD support" depends on HAS_IOMEM depends on COMPILE_TEST # nothing uses this - ---help--- + help Supports the Philips ISP1362 chip as a host controller This driver does not support isochronous transfers. @@ -392,7 +392,7 @@ config USB_ISP1362_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB && HAS_DMA && HAS_IOMEM - ---help--- + help Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification with minor modification. @@ -403,7 +403,7 @@ config USB_FOTG210_HCD config USB_MAX3421_HCD tristate "MAX3421 HCD (USB-over-SPI) support" depends on USB && SPI - ---help--- + help The Maxim MAX3421E chip supports standard USB 2.0-compliant full-speed devices either in host or peripheral mode. This driver supports the host-mode of the MAX3421E only. @@ -414,7 +414,7 @@ config USB_MAX3421_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's UHCI specification. If your USB host controller follows the OHCI spec, @@ -434,14 +434,14 @@ config USB_OHCI_HCD_OMAP1 depends on ARCH_OMAP1 depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y - ---help--- + help Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip OHCI USB controller" depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) default y if PLAT_SPEAR - ---help--- + help Enables support for the on-chip OHCI controller on ST SPEAr chips. @@ -458,7 +458,7 @@ config USB_OHCI_HCD_S3C2410 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) default y if (ARCH_S3C24XX || ARCH_S3C64XX) - ---help--- + help Enables support for the on-chip OHCI controller on S3C24xx/S3C64xx chips. @@ -468,7 +468,7 @@ config USB_OHCI_HCD_LPC32XX depends on ARCH_LPC32XX || COMPILE_TEST depends on USB_ISP1301 default y - ---help--- + help Enables support for the on-chip OHCI controller on NXP chips. @@ -476,7 +476,7 @@ config USB_OHCI_HCD_PXA27X tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" depends on USB_OHCI_HCD && (PXA27x || PXA3xx) default y - ---help--- + help Enables support for the on-chip OHCI controller on PXA27x/PXA3xx chips. @@ -484,7 +484,7 @@ config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF default y if ARCH_AT91 - ---help--- + help Enables support for the on-chip OHCI controller on Atmel chips. @@ -516,7 +516,7 @@ config USB_OHCI_HCD_PPC_OF_BE depends on PPC select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO - ---help--- + help Enables support for big-endian USB controllers present on the OpenFirmware platform bus. @@ -524,7 +524,7 @@ config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" depends on PPC select USB_OHCI_LITTLE_ENDIAN - ---help--- + help Enables support for little-endian USB controllers present on the OpenFirmware platform bus. @@ -538,7 +538,7 @@ config USB_OHCI_HCD_PCI depends on USB_PCI default y select USB_OHCI_LITTLE_ENDIAN - ---help--- + help Enables support for PCI-bus plug-in USB controller cards. If unsure, say Y. @@ -547,7 +547,7 @@ config USB_OHCI_HCD_SSB depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM - ---help--- + help This option is deprecated now and the driver was removed, use USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. @@ -563,7 +563,7 @@ config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" depends on SUPERH || COMPILE_TEST select USB_OHCI_HCD_PLATFORM - ---help--- + help This option is deprecated now and the driver was removed, use USB_OHCI_HCD_PLATFORM instead. @@ -580,7 +580,7 @@ config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" depends on ARCH_CNS3XXX || COMPILE_TEST select USB_OHCI_HCD_PLATFORM - ---help--- + help This option is deprecated now and the driver was removed, use USB_OHCI_HCD_PLATFORM instead. @@ -589,7 +589,7 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM tristate "Generic OHCI driver for a platform device" - ---help--- + help Adds an OHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -615,7 +615,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC - ---help--- + help The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB host controller). If your USB host controller conforms to this @@ -777,7 +777,7 @@ config USB_HCD_SSB config USB_HCD_TEST_MODE bool "HCD test mode support" - ---help--- + help Say 'Y' to enable additional software test modes that may be supported by the host controller drivers. diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig index 26c75f309da9..a65c638e7fc1 100644 --- a/drivers/usb/image/Kconfig +++ b/drivers/usb/image/Kconfig @@ -6,7 +6,7 @@ comment "USB Imaging devices" config USB_MDC800 tristate "USB Mustek MDC800 Digital Camera support" - ---help--- + help Say Y here if you want to connect this type of still camera to your computer's USB port. This driver can be used with gphoto 0.4.3 and higher (look at <http://www.gphoto.org/>). diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 833a460ee55a..4e48f8eed168 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -6,7 +6,7 @@ comment "USB Miscellaneous drivers" config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" - ---help--- + help This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. @@ -20,7 +20,7 @@ config USB_EMI62 config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" - ---help--- + help This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index c16121276a21..655d9cb0651a 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -4,7 +4,7 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" depends on (USB_MUSB_HDRC || USB_EHCI_HCD) select FONT_SUPPORT if USB_SISUSBVGA_CON - ---help--- + help Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. @@ -18,7 +18,7 @@ config USB_SISUSBVGA_CON bool "Text console and mode switching support" if USB_SISUSBVGA depends on VT select FONT_8x16 - ---help--- + help Say Y here if you want a VGA text console via the USB dongle or want to support userland applications that utilize the driver's display mode switching capabilities. diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 25d7e0c36d38..4007fa25a8ff 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -6,7 +6,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" depends on TTY - ---help--- + help Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to your USB bus. @@ -23,7 +23,7 @@ if USB_SERIAL config USB_SERIAL_CONSOLE bool "USB Serial Console device support" depends on USB_SERIAL=y - ---help--- + help If you say Y here, it will be possible to use a USB to serial converter port as the system console (the system console is the device which receives all kernel messages and warnings and which @@ -123,7 +123,7 @@ config USB_SERIAL_WHITEHEAT config USB_SERIAL_DIGI_ACCELEPORT tristate "USB Digi International AccelePort USB Serial Driver" - ---help--- + help Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 2 port (plus parallel port) and 4 port USB serial converters. The parallel port on the USB 2 appears as a third serial port on Linux. @@ -168,7 +168,7 @@ config USB_SERIAL_EMPEG config USB_SERIAL_FTDI_SIO tristate "USB FTDI Single Port Serial Driver" - ---help--- + help Say Y here if you want to use a FTDI SIO single port USB to serial converter device. The implementation I have is called the USC-1000. This driver has also been tested with the 245 and 232 devices. @@ -213,7 +213,7 @@ config USB_SERIAL_IR config USB_SERIAL_EDGEPORT tristate "USB Inside Out Edgeport Serial Driver" - ---help--- + help Say Y here if you want to use any of the following devices from Inside Out Networks (Digi): Edgeport/4 @@ -311,7 +311,7 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" select USB_EZUSB_FX2 - ---help--- + help Say Y here if you want to use Keyspan USB to serial converter devices. This driver makes use of Keyspan's official firmware and was developed with their support. You must also include @@ -324,7 +324,7 @@ config USB_SERIAL_KEYSPAN config USB_SERIAL_KLSI tristate "USB KL5KUSB105 (Palmconnect) Driver" - ---help--- + help Say Y here if you want to use a KL5KUSB105 - based single port serial adapter. The most widely known -- and currently the only tested -- device in this category is the PalmConnect USB Serial @@ -339,7 +339,7 @@ config USB_SERIAL_KLSI config USB_SERIAL_KOBIL_SCT tristate "USB KOBIL chipcard reader" - ---help--- + help Say Y here if you want to use one of the following KOBIL USB chipcard readers: @@ -356,7 +356,7 @@ config USB_SERIAL_KOBIL_SCT config USB_SERIAL_MCT_U232 tristate "USB MCT Single Port Serial Driver" - ---help--- + help Say Y here if you want to use a USB Serial single port adapter from Magic Control Technology Corp. (U232 is one of the model numbers). @@ -368,7 +368,7 @@ config USB_SERIAL_MCT_U232 config USB_SERIAL_METRO tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" - ---help--- + help Say Y here if you want to use a USB POS Metrologic barcode scanner. To compile this driver as a module, choose M here: the @@ -376,7 +376,7 @@ config USB_SERIAL_METRO config USB_SERIAL_MOS7720 tristate "USB Moschip 7720 Serial Driver" - ---help--- + help Say Y here if you want to use USB Serial single and double port adapters from Moschip Semiconductor Tech. @@ -388,14 +388,14 @@ config USB_SERIAL_MOS7715_PARPORT depends on USB_SERIAL_MOS7720 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 select PARPORT_NOT_PC - ---help--- + help Say Y if you have a Moschip 7715 device and would like to use the parallel port it provides. The port will register with the parport subsystem as a low-level driver. config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" - ---help--- + help Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 Dual-Serial port device from MosChip Semiconductor. @@ -409,7 +409,7 @@ config USB_SERIAL_MOS7840 config USB_SERIAL_MXUPORT tristate "USB Moxa UPORT Serial Driver" - ---help--- + help Say Y here if you want to use a MOXA UPort Serial hub. This driver supports: @@ -528,7 +528,7 @@ config USB_SERIAL_TI config USB_SERIAL_CYBERJACK tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" - ---help--- + help Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard reader. This is an interface to ISO 7816 compatible contact-based chipcards, e.g. GSM SIMs. diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 59aad38b490a..5335a7ff5d14 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -9,7 +9,7 @@ comment "also be needed; see USB_STORAGE Help for more info" config USB_STORAGE tristate "USB Mass Storage support" depends on SCSI - ---help--- + help Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, @@ -63,7 +63,7 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 tristate "ISD-200 USB/ATA Bridge support" - ---help--- + help Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. @@ -165,7 +165,7 @@ config USB_STORAGE_KARMA config USB_STORAGE_CYPRESS_ATACB tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" - ---help--- + help Say Y here if you want to use SAT (ata pass through) on devices based on the Cypress USB/ATA bridge supporting ATACB. This will allow you to use tools to tune and monitor your drive (like hdparm or smartctl). @@ -177,7 +177,7 @@ config USB_STORAGE_CYPRESS_ATACB config USB_STORAGE_ENE_UB6250 tristate "USB ENE card reader support" - ---help--- + help Say Y here if you wish to control a ENE SD/MS Card reader. Note that this driver does not support SM cards. diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig index 7bbae7a08642..b9f94e2e278d 100644 --- a/drivers/usb/usbip/Kconfig +++ b/drivers/usb/usbip/Kconfig @@ -5,7 +5,7 @@ config USBIP_CORE depends on NET select USB_COMMON select SGL_ALLOC - ---help--- + help This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the USB/IP core that is required by both drivers. @@ -21,7 +21,7 @@ config USBIP_CORE config USBIP_VHCI_HCD tristate "VHCI hcd" depends on USBIP_CORE && USB - ---help--- + help This enables the USB/IP virtual host controller driver, which is run on the remote machine. @@ -33,7 +33,7 @@ config USBIP_VHCI_HC_PORTS range 1 15 default 8 depends on USBIP_VHCI_HCD - ---help--- + help To increase number of ports available for USB/IP virtual host controller driver, this defines number of ports per USB/IP virtual host controller. @@ -43,7 +43,7 @@ config USBIP_VHCI_NR_HCS range 1 128 default 1 depends on USBIP_VHCI_HCD - ---help--- + help To increase number of ports available for USB/IP virtual host controller driver, this defines number of USB/IP virtual host controllers as if adding physical host @@ -52,7 +52,7 @@ config USBIP_VHCI_NR_HCS config USBIP_HOST tristate "Host driver" depends on USBIP_CORE && USB - ---help--- + help This enables the USB/IP host driver, which is run on the machine that is sharing the USB devices. @@ -62,7 +62,7 @@ config USBIP_HOST config USBIP_VUDC tristate "VUDC driver" depends on USBIP_CORE && USB_GADGET - ---help--- + help This enables the USB/IP virtual USB device controller driver, which is run on the host machine, allowing the machine itself to act as a device. @@ -73,5 +73,5 @@ config USBIP_VUDC config USBIP_DEBUG bool "Debug messages for USB/IP" depends on USBIP_CORE - ---help--- + help This enables the debug messages from the USB/IP drivers. |