summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/xhci-hub.c9
-rw-r--r--drivers/usb/host/xhci-plat.c4
-rw-r--r--drivers/usb/host/xhci-ring.c50
-rw-r--r--drivers/usb/host/xhci.c14
-rw-r--r--drivers/usb/host/xhci.h5
5 files changed, 64 insertions, 18 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 9eca1fe81061..f37316d2c8fa 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1571,6 +1571,8 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
}
if ((temp & PORT_RC))
reset_change = true;
+ if (temp & PORT_OC)
+ status = 1;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
@@ -1636,6 +1638,13 @@ retry:
port_index);
goto retry;
}
+ /* bail out if port detected a over-current condition */
+ if (t1 & PORT_OC) {
+ bus_state->bus_suspended = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+ return -EBUSY;
+ }
/* suspend ports in U0, or bail out for new connect changes */
if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
if ((t1 & PORT_CSC) && wake_enabled) {
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1d4f6f85f0fe..ea460b9682d5 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -362,6 +362,7 @@ static int xhci_plat_remove(struct platform_device *dev)
struct clk *reg_clk = xhci->reg_clk;
struct usb_hcd *shared_hcd = xhci->shared_hcd;
+ pm_runtime_get_sync(&dev->dev);
xhci->xhc_state |= XHCI_STATE_REMOVING;
usb_remove_hcd(shared_hcd);
@@ -375,8 +376,9 @@ static int xhci_plat_remove(struct platform_device *dev)
clk_disable_unprepare(reg_clk);
usb_put_hcd(hcd);
- pm_runtime_set_suspended(&dev->dev);
pm_runtime_disable(&dev->dev);
+ pm_runtime_put_noidle(&dev->dev);
+ pm_runtime_set_suspended(&dev->dev);
return 0;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a78787bb5133..2c255d0620b0 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -547,6 +547,23 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
stream_id);
return;
}
+ /*
+ * A cancelled TD can complete with a stall if HW cached the trb.
+ * In this case driver can't find cur_td, but if the ring is empty we
+ * can move the dequeue pointer to the current enqueue position.
+ */
+ if (!cur_td) {
+ if (list_empty(&ep_ring->td_list)) {
+ state->new_deq_seg = ep_ring->enq_seg;
+ state->new_deq_ptr = ep_ring->enqueue;
+ state->new_cycle_state = ep_ring->cycle_state;
+ goto done;
+ } else {
+ xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+ return;
+ }
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
@@ -592,6 +609,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
+done:
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
@@ -1856,8 +1874,8 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
if (reset_type == EP_HARD_RESET) {
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
- xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
- xhci_clear_hub_tt_buffer(xhci, td, ep);
+ xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+ td);
}
xhci_ring_cmd_db(xhci);
}
@@ -1978,11 +1996,18 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*
+ * xhci internal endpoint state will go to a "halt" state for
+ * any stall, including default control pipe protocol stall.
+ * To clear the host side halt we need to issue a reset endpoint
+ * command, followed by a set dequeue command to move past the
+ * TD.
+ * Class drivers clear the device side halt from a functional
+ * stall later. Hub TT buffer should only be cleared for FS/LS
+ * devices behind HS hubs for functional stalls.
*/
+ if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+ xhci_clear_hub_tt_buffer(xhci, td, ep);
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, EP_HARD_RESET);
} else {
@@ -2539,6 +2564,15 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
+ if (trb_comp_code == COMP_STALL_ERROR ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ xhci_cleanup_halted_endpoint(xhci, slot_id,
+ ep_index,
+ ep_ring->stream_id,
+ NULL,
+ EP_HARD_RESET);
+ }
goto cleanup;
}
@@ -3399,8 +3433,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* New sg entry */
--num_sgs;
sent_len -= block_len;
- if (num_sgs != 0) {
- sg = sg_next(sg);
+ sg = sg_next(sg);
+ if (num_sgs != 0 && sg) {
block_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
addr += sent_len;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fe38275363e0..bee5deccc83d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3031,19 +3031,19 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
added_ctxs, added_ctxs);
}
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td)
{
struct xhci_dequeue_state deq_state;
- struct usb_device *udev = td->urb->dev;
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Cleaning up stalled endpoint ring");
/* We need to move the HW's dequeue pointer past this TD,
* or it will attempt to resend it on the next doorbell ring.
*/
- xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, stream_id, td, &deq_state);
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+ &deq_state);
if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
return;
@@ -3054,7 +3054,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Queueing new dequeue state");
- xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+ xhci_queue_new_dequeue_state(xhci, slot_id,
ep_index, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
@@ -3065,7 +3065,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Setting up input context for "
"configure endpoint command");
- xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ xhci_setup_input_ctx_for_quirk(xhci, slot_id,
ep_index, &deq_state);
}
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3289bb516201..86cfefdd6632 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2116,8 +2116,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
void xhci_handle_command_timeout(struct work_struct *work);
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-28 22:05:27 +0000