diff options
Diffstat (limited to 'drivers/usb/host/ehci-pxa168.c')
| -rw-r--r-- | drivers/usb/host/ehci-pxa168.c | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c new file mode 100644 index 000000000000..ac0c16e8f539 --- /dev/null +++ b/drivers/usb/host/ehci-pxa168.c @@ -0,0 +1,363 @@ +/* + * drivers/usb/host/ehci-pxa168.c + * + * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> + * + * Based on drivers/usb/host/ehci-orion.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <mach/pxa168.h> + +#define USB_PHY_CTRL_REG 0x4 +#define USB_PHY_PLL_REG 0x8 +#define USB_PHY_TX_REG 0xc + +#define FBDIV_SHIFT 4 + +#define ICP_SHIFT 12 +#define ICP_15 2 +#define ICP_20 3 +#define ICP_25 4 + +#define KVCO_SHIFT 15 + +#define PLLCALI12_SHIFT 25 +#define CALI12_VDD 0 +#define CALI12_09 1 +#define CALI12_10 2 +#define CALI12_11 3 + +#define PLLVDD12_SHIFT 27 +#define VDD12_VDD 0 +#define VDD12_10 1 +#define VDD12_11 2 +#define VDD12_12 3 + +#define PLLVDD18_SHIFT 29 +#define VDD18_19 0 +#define VDD18_20 1 +#define VDD18_21 2 +#define VDD18_22 3 + + +#define PLL_READY (1 << 23) +#define VCOCAL_START (1 << 21) +#define REG_RCAL_START (1 << 12) + +struct pxa168_usb_drv_data { + struct ehci_hcd ehci; + struct clk *pxa168_usb_clk; + struct resource *usb_phy_res; + void __iomem *usb_phy_reg_base; +}; + +static int ehci_pxa168_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + ehci_reset(ehci); + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* + * data structure init + */ + retval = ehci_init(hcd); + if (retval) + return retval; + + hcd->has_tt = 1; + + ehci_port_power(ehci, 0); + + return retval; +} + +static const struct hc_driver ehci_pxa168_hc_driver = { + .description = hcd_name, + .product_desc = "Marvell PXA168 EHCI", + .hcd_priv_size = sizeof(struct pxa168_usb_drv_data), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pxa168_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int pxa168_usb_phy_init(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *usb_phy_reg_base; + struct pxa168_usb_pdata *pdata; + struct pxa168_usb_drv_data *drv_data; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + unsigned long reg_val; + int pll_retry_cont = 10000, err = 0; + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no PHY register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + return -EBUSY; + } + + usb_phy_reg_base = ioremap(res->start, resource_size(res)); + if (usb_phy_reg_base == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err1; + } + drv_data->usb_phy_reg_base = usb_phy_reg_base; + drv_data->usb_phy_res = res; + + /* If someone wants to init USB phy in board specific way */ + if (pdata && pdata->phy_init) + return pdata->phy_init(usb_phy_reg_base); + + /* Power up the PHY and PLL */ + writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3, + usb_phy_reg_base + USB_PHY_CTRL_REG); + + /* Configure PHY PLL */ + reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff); + reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT | + CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT | + ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb); + writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Make sure PHY PLL is ready */ + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */ + udelay(200); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */ + udelay(400); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + + /* Make sure PHY PLL is ready again */ + pll_retry_cont = 0; + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + return 0; +err2: + iounmap(usb_phy_reg_base); +err1: + release_mem_region(res->start, resource_size(res)); + return err; +} + +static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct pxa168_usb_drv_data *drv_data; + void __iomem *regs; + int irq, err = 0; + + if (usb_disabled()) + return -ENODEV; + + pr_debug("Initializing pxa168-SoC USB Host Controller\n"); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + err = -EBUSY; + goto err1; + } + + regs = ioremap(res->start, resource_size(res)); + if (regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err2; + } + + hcd = usb_create_hcd(&ehci_pxa168_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + err = -ENOMEM; + goto err3; + } + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + /* Enable USB clock */ + drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK"); + if (IS_ERR(drv_data->pxa168_usb_clk)) { + dev_err(&pdev->dev, "Couldn't get USB clock\n"); + err = PTR_ERR(drv_data->pxa168_usb_clk); + goto err4; + } + clk_enable(drv_data->pxa168_usb_clk); + + err = pxa168_usb_phy_init(pdev); + if (err) { + dev_err(&pdev->dev, "USB PHY initialization failed\n"); + goto err5; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs + 0x100; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + hcd->has_tt = 1; + ehci->sbrn = 0x20; + + err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + if (err) + goto err5; + + return 0; + +err5: + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); +err4: + usb_put_hcd(hcd); +err3: + iounmap(regs); +err2: + release_mem_region(res->start, resource_size(res)); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", + dev_name(&pdev->dev), err); + + return err; +} + +static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct pxa168_usb_drv_data *drv_data = + (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + usb_remove_hcd(hcd); + + /* Power down PHY & PLL */ + writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3), + drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG); + + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); + + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + + iounmap(drv_data->usb_phy_reg_base); + release_mem_region(drv_data->usb_phy_res->start, + resource_size(drv_data->usb_phy_res)); + + usb_put_hcd(hcd); + + return 0; +} + +MODULE_ALIAS("platform:pxa168-ehci"); + +static struct platform_driver ehci_pxa168_driver = { + .probe = ehci_pxa168_drv_probe, + .remove = __exit_p(ehci_pxa168_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "pxa168-ehci", +}; |