20 files changed, 206 insertions, 242 deletions

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 458bb1280ebf..5b97e420a95f 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -288,7 +288,7 @@ struct mxser_board {
 	enum mxser_must_hwid must_hwid;
 	speed_t max_baud;
 
-	struct mxser_port ports[] __counted_by(nports);
+	struct mxser_port ports[] /* __counted_by(nports) */;
 };
 
 static DECLARE_BITMAP(mxser_boards, MXSER_BOARDS);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f252d0b5a434..5e9ca4376d68 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1619,15 +1619,25 @@ static void __receive_buf(struct tty_struct *tty, const u8 *cp, const u8 *fp,
 	else if (ldata->raw || (L_EXTPROC(tty) && !preops))
 		n_tty_receive_buf_raw(tty, cp, fp, count);
 	else if (tty->closing && !L_EXTPROC(tty)) {
-		if (la_count > 0)
+		if (la_count > 0) {
 			n_tty_receive_buf_closing(tty, cp, fp, la_count, true);
-		if (count > la_count)
-			n_tty_receive_buf_closing(tty, cp, fp, count - la_count, false);
+			cp += la_count;
+			if (fp)
+				fp += la_count;
+			count -= la_count;
+		}
+		if (count > 0)
+			n_tty_receive_buf_closing(tty, cp, fp, count, false);
 	} else {
-		if (la_count > 0)
+		if (la_count > 0) {
 			n_tty_receive_buf_standard(tty, cp, fp, la_count, true);
-		if (count > la_count)
-			n_tty_receive_buf_standard(tty, cp, fp, count - la_count, false);
+			cp += la_count;
+			if (fp)
+				fp += la_count;
+			count -= la_count;
+		}
+		if (count > 0)
+			n_tty_receive_buf_standard(tty, cp, fp, count, false);
 
 		flush_echoes(tty);
 		if (tty->ops->flush_chars)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ff15022369e4..b0adafc44747 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/cleanup.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/ioport.h>
@@ -42,8 +41,6 @@
 
 #include <asm/irq.h>
 
-#include "../serial_base.h"	/* For serial_base_add_isa_preferred_console() */
-
 #include "8250.h"
 
 /*
@@ -563,8 +560,6 @@ static void __init serial8250_isa_init_ports(void)
 		port->irqflags |= irqflag;
 		if (serial8250_isa_config != NULL)
 			serial8250_isa_config(i, &up->port, &up->capabilities);
-
-		serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i);
 	}
 }
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ba9f4dc4e71d..fb809e32c6ae 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -55,6 +55,34 @@
 #define DW_UART_QUIRK_SKIP_SET_RATE	BIT(2)
 #define DW_UART_QUIRK_IS_DMA_FC		BIT(3)
 #define DW_UART_QUIRK_APMC0D08		BIT(4)
+#define DW_UART_QUIRK_CPR_VALUE		BIT(5)
+
+struct dw8250_platform_data {
+	u8 usr_reg;
+	u32 cpr_value;
+	unsigned int quirks;
+};
+
+struct dw8250_data {
+	struct dw8250_port_data	data;
+	const struct dw8250_platform_data *pdata;
+
+	int			msr_mask_on;
+	int			msr_mask_off;
+	struct clk		*clk;
+	struct clk		*pclk;
+	struct notifier_block	clk_notifier;
+	struct work_struct	clk_work;
+	struct reset_control	*rst;
+
+	unsigned int		skip_autocfg:1;
+	unsigned int		uart_16550_compatible:1;
+};
+
+static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
+{
+	return container_of(data, struct dw8250_data, data);
+}
 
 static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb)
 {
@@ -432,6 +460,10 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p)
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
 	unsigned int quirks = data->pdata ? data->pdata->quirks : 0;
+	u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0;
+
+	if (quirks & DW_UART_QUIRK_CPR_VALUE)
+		data->data.cpr_value = cpr_value;
 
 #ifdef CONFIG_64BIT
 	if (quirks & DW_UART_QUIRK_OCTEON) {
@@ -714,8 +746,8 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = {
 
 static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
 	.usr_reg = DW_UART_USR,
-	.cpr_val = 0x00012f32,
-	.quirks = DW_UART_QUIRK_IS_DMA_FC,
+	.cpr_value = 0x00012f32,
+	.quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC,
 };
 
 static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 3e33ddf7bc80..5a2520943dfd 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -242,7 +242,6 @@ static const struct serial_rs485 dw8250_rs485_supported = {
 void dw8250_setup_port(struct uart_port *p)
 {
 	struct dw8250_port_data *pd = p->private_data;
-	struct dw8250_data *data = to_dw8250_data(pd);
 	struct uart_8250_port *up = up_to_u8250p(p);
 	u32 reg, old_dlf;
 
@@ -278,7 +277,7 @@ void dw8250_setup_port(struct uart_port *p)
 
 	reg = dw8250_readl_ext(p, DW_UART_CPR);
 	if (!reg) {
-		reg = data->pdata->cpr_val;
+		reg = pd->cpr_value;
 		dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg);
 	}
 	if (!reg)
diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
index f13e91f2cace..7dd2a8e7b780 100644
--- a/drivers/tty/serial/8250/8250_dwlib.h
+++ b/drivers/tty/serial/8250/8250_dwlib.h
@@ -2,15 +2,10 @@
 /* Synopsys DesignWare 8250 library header file. */
 
 #include <linux/io.h>
-#include <linux/notifier.h>
 #include <linux/types.h>
-#include <linux/workqueue.h>
 
 #include "8250.h"
 
-struct clk;
-struct reset_control;
-
 struct dw8250_port_data {
 	/* Port properties */
 	int			line;
@@ -19,42 +14,16 @@ struct dw8250_port_data {
 	struct uart_8250_dma	dma;
 
 	/* Hardware configuration */
+	u32			cpr_value;
 	u8			dlf_size;
 
 	/* RS485 variables */
 	bool			hw_rs485_support;
 };
 
-struct dw8250_platform_data {
-	u8 usr_reg;
-	u32 cpr_val;
-	unsigned int quirks;
-};
-
-struct dw8250_data {
-	struct dw8250_port_data	data;
-	const struct dw8250_platform_data *pdata;
-
-	int			msr_mask_on;
-	int			msr_mask_off;
-	struct clk		*clk;
-	struct clk		*pclk;
-	struct notifier_block	clk_notifier;
-	struct work_struct	clk_work;
-	struct reset_control	*rst;
-
-	unsigned int		skip_autocfg:1;
-	unsigned int		uart_16550_compatible:1;
-};
-
 void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old);
 void dw8250_setup_port(struct uart_port *p);
 
-static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
-{
-	return container_of(data, struct dw8250_data, data);
-}
-
 static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
 {
 	if (p->iotype == UPIO_MEM32BE)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 170639d12b2a..1af9aed99c65 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -115,6 +115,10 @@
 /* RX FIFO occupancy indicator */
 #define UART_OMAP_RX_LVL		0x19
 
+/* Timeout low and High */
+#define UART_OMAP_TO_L                 0x26
+#define UART_OMAP_TO_H                 0x27
+
 /*
  * Copy of the genpd flags for the console.
  * Only used if console suspend is disabled
@@ -663,13 +667,25 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 
 	/*
 	 * On K3 SoCs, it is observed that RX TIMEOUT is signalled after
-	 * FIFO has been drained, in which case a dummy read of RX FIFO
-	 * is required to clear RX TIMEOUT condition.
+	 * FIFO has been drained or erroneously.
+	 * So apply solution of Errata i2310 as mentioned in
+	 * https://www.ti.com/lit/pdf/sprz536
 	 */
 	if (priv->habit & UART_RX_TIMEOUT_QUIRK &&
 	    (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT &&
 	    serial_port_in(port, UART_OMAP_RX_LVL) == 0) {
-		serial_port_in(port, UART_RX);
+		unsigned char efr2, timeout_h, timeout_l;
+
+		efr2 = serial_in(up, UART_OMAP_EFR2);
+		timeout_h = serial_in(up, UART_OMAP_TO_H);
+		timeout_l = serial_in(up, UART_OMAP_TO_L);
+		serial_out(up, UART_OMAP_TO_H, 0xFF);
+		serial_out(up, UART_OMAP_TO_L, 0xFF);
+		serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE);
+		serial_in(up, UART_IIR);
+		serial_out(up, UART_OMAP_EFR2, efr2);
+		serial_out(up, UART_OMAP_TO_H, timeout_h);
+		serial_out(up, UART_OMAP_TO_L, timeout_l);
 	}
 
 	/* Stop processing interrupts on input overrun */
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 40af74b55933..e1d7aa2fa347 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1985,6 +1985,17 @@ enum {
 	MOXA_SUPP_RS485 = BIT(2),
 };
 
+static unsigned short moxa_get_nports(unsigned short device)
+{
+	switch (device) {
+	case PCI_DEVICE_ID_MOXA_CP116E_A_A:
+	case PCI_DEVICE_ID_MOXA_CP116E_A_B:
+		return 8;
+	}
+
+	return FIELD_GET(0x00F0, device);
+}
+
 static bool pci_moxa_is_mini_pcie(unsigned short device)
 {
 	if (device == PCI_DEVICE_ID_MOXA_CP102N	||
@@ -2038,7 +2049,7 @@ static int pci_moxa_init(struct pci_dev *dev)
 {
 	unsigned short device = dev->device;
 	resource_size_t iobar_addr = pci_resource_start(dev, 2);
-	unsigned int num_ports = (device & 0x00F0) >> 4, i;
+	unsigned int i, num_ports = moxa_get_nports(device);
 	u8 val, init_mode = MOXA_RS232;
 
 	if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) {
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index f1a51b00b1b9..ba96fa913e7f 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -125,6 +125,7 @@ static int serial_pxa_probe(struct platform_device *pdev)
 	uart.port.iotype = UPIO_MEM32;
 	uart.port.regshift = 2;
 	uart.port.fifosize = 64;
+	uart.tx_loadsz = 32;
 	uart.dl_write = serial_pxa_dl_write;
 
 	ret = serial8250_register_8250_port(&uart);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4fdd7857ef4d..28e4beeabf8f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1023,8 +1023,9 @@ config SERIAL_SCCNXP_CONSOLE
 	help
 	  Support for console on SCCNXP serial ports.
 
-config SERIAL_SC16IS7XX_CORE
+config SERIAL_SC16IS7XX
 	tristate "NXP SC16IS7xx UART support"
+	depends on SPI_MASTER || I2C
 	select SERIAL_CORE
 	select SERIAL_SC16IS7XX_SPI if SPI_MASTER
 	select SERIAL_SC16IS7XX_I2C if I2C
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index faa45f2b8bb0..6ff74f0a9530 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -75,7 +75,7 @@ obj-$(CONFIG_SERIAL_SA1100)		+= sa1100.o
 obj-$(CONFIG_SERIAL_SAMSUNG)		+= samsung_tty.o
 obj-$(CONFIG_SERIAL_SB1250_DUART)	+= sb1250-duart.o
 obj-$(CONFIG_SERIAL_SCCNXP)		+= sccnxp.o
-obj-$(CONFIG_SERIAL_SC16IS7XX_CORE)	+= sc16is7xx.o
+obj-$(CONFIG_SERIAL_SC16IS7XX)		+= sc16is7xx.o
 obj-$(CONFIG_SERIAL_SC16IS7XX_SPI)	+= sc16is7xx_spi.o
 obj-$(CONFIG_SERIAL_SC16IS7XX_I2C)	+= sc16is7xx_i2c.o
 obj-$(CONFIG_SERIAL_SH_SCI)		+= sh-sci.o
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 34801a6f300b..b88cc28c94e3 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -308,8 +308,8 @@ static void bcm_uart_do_tx(struct uart_port *port)
 
 	val = bcm_uart_readl(port, UART_MCTL_REG);
 	val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
-
-	pending = uart_port_tx_limited(port, ch, port->fifosize - val,
+	pending = uart_port_tx_limited_flags(port, ch, UART_TX_NOSTOP,
+		port->fifosize - val,
 		true,
 		bcm_uart_writel(port, ch, UART_FIFO_REG),
 		({}));
@@ -320,6 +320,9 @@ static void bcm_uart_do_tx(struct uart_port *port)
 	val = bcm_uart_readl(port, UART_IR_REG);
 	val &= ~UART_TX_INT_MASK;
 	bcm_uart_writel(port, val, UART_IR_REG);
+
+	if (uart_tx_stopped(port))
+		bcm_uart_stop_tx(port);
 }
 
 /*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 2eb22594960f..ff32cd2d2863 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -120,6 +120,7 @@
 #define UCR4_OREN	(1<<1)	/* Receiver overrun interrupt enable */
 #define UCR4_DREN	(1<<0)	/* Recv data ready interrupt enable */
 #define UFCR_RXTL_SHF	0	/* Receiver trigger level shift */
+#define UFCR_RXTL_MASK	0x3F	/* Receiver trigger 6 bits wide */
 #define UFCR_DCEDTE	(1<<6)	/* DCE/DTE mode select */
 #define UFCR_RFDIV	(7<<7)	/* Reference freq divider mask */
 #define UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
@@ -1551,6 +1552,7 @@ static void imx_uart_shutdown(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long flags;
 	u32 ucr1, ucr2, ucr4, uts;
+	int loops;
 
 	if (sport->dma_is_enabled) {
 		dmaengine_terminate_sync(sport->dma_chan_tx);
@@ -1613,6 +1615,56 @@ static void imx_uart_shutdown(struct uart_port *port)
 	ucr4 &= ~UCR4_TCEN;
 	imx_uart_writel(sport, ucr4, UCR4);
 
+	/*
+	 * We have to ensure the tx state machine ends up in OFF. This
+	 * is especially important for rs485 where we must not leave
+	 * the RTS signal high, blocking the bus indefinitely.
+	 *
+	 * All interrupts are now disabled, so imx_uart_stop_tx() will
+	 * no longer be called from imx_uart_transmit_buffer(). It may
+	 * still be called via the hrtimers, and if those are in play,
+	 * we have to honour the delays.
+	 */
+	if (sport->tx_state == WAIT_AFTER_RTS || sport->tx_state == SEND)
+		imx_uart_stop_tx(port);
+
+	/*
+	 * In many cases (rs232 mode, or if tx_state was
+	 * WAIT_AFTER_RTS, or if tx_state was SEND and there is no
+	 * delay_rts_after_send), this will have moved directly to
+	 * OFF. In rs485 mode, tx_state might already have been
+	 * WAIT_AFTER_SEND and the hrtimer thus already started, or
+	 * the above imx_uart_stop_tx() call could have started it. In
+	 * those cases, we have to wait for the hrtimer to fire and
+	 * complete the transition to OFF.
+	 */
+	loops = port->rs485.flags & SER_RS485_ENABLED ?
+		port->rs485.delay_rts_after_send : 0;
+	while (sport->tx_state != OFF && loops--) {
+		uart_port_unlock_irqrestore(&sport->port, flags);
+		msleep(1);
+		uart_port_lock_irqsave(&sport->port, &flags);
+	}
+
+	if (sport->tx_state != OFF) {
+		dev_warn(sport->port.dev, "unexpected tx_state %d\n",
+			 sport->tx_state);
+		/*
+		 * This machine may be busted, but ensure the RTS
+		 * signal is inactive in order not to block other
+		 * devices.
+		 */
+		if (port->rs485.flags & SER_RS485_ENABLED) {
+			ucr2 = imx_uart_readl(sport, UCR2);
+			if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+				imx_uart_rts_active(sport, &ucr2);
+			else
+				imx_uart_rts_inactive(sport, &ucr2);
+			imx_uart_writel(sport, ucr2, UCR2);
+		}
+		sport->tx_state = OFF;
+	}
+
 	uart_port_unlock_irqrestore(&sport->port, flags);
 
 	clk_disable_unprepare(sport->clk_per);
@@ -1933,7 +1985,7 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio
 				 struct serial_rs485 *rs485conf)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	u32 ucr2;
+	u32 ucr2, ufcr;
 
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		/* Enable receiver if low-active RTS signal is requested */
@@ -1952,8 +2004,13 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio
 
 	/* Make sure Rx is enabled in case Tx is active with Rx disabled */
 	if (!(rs485conf->flags & SER_RS485_ENABLED) ||
-	    rs485conf->flags & SER_RS485_RX_DURING_TX)
+	    rs485conf->flags & SER_RS485_RX_DURING_TX) {
+		/* If the receiver trigger is 0, set it to a default value */
+		ufcr = imx_uart_readl(sport, UFCR);
+		if ((ufcr & UFCR_RXTL_MASK) == 0)
+			imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
 		imx_uart_start_rx(port);
+	}
 
 	return 0;
 }
diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c
index 19f0a305cc43..3b4206e815fe 100644
--- a/drivers/tty/serial/ma35d1_serial.c
+++ b/drivers/tty/serial/ma35d1_serial.c
@@ -688,12 +688,13 @@ static int ma35d1serial_probe(struct platform_device *pdev)
 	struct uart_ma35d1_port *up;
 	int ret = 0;
 
-	if (pdev->dev.of_node) {
-		ret = of_alias_get_id(pdev->dev.of_node, "serial");
-		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", ret);
-			return ret;
-		}
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	ret = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", ret);
+		return ret;
 	}
 	up = &ma35d1serial_ports[ret];
 	up->port.line = ret;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index b0604d6da025..58858dd352c5 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -462,7 +462,7 @@ static const struct uart_ops mcf_uart_ops = {
 	.verify_port	= mcf_verify_port,
 };
 
-static struct mcf_uart mcf_ports[4];
+static struct mcf_uart mcf_ports[10];
 
 #define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
 
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 2bd25afe0d92..69a632fefc41 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -649,15 +649,25 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
 
 static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport)
 {
+	unsigned char c;
 	u32 irq_en;
 
-	if (qcom_geni_serial_main_active(uport) ||
-	    !qcom_geni_serial_tx_empty(uport))
-		return;
+	/*
+	 * Start a new transfer in case the previous command was cancelled and
+	 * left data in the FIFO which may prevent the watermark interrupt
+	 * from triggering. Note that the stale data is discarded.
+	 */
+	if (!qcom_geni_serial_main_active(uport) &&
+	    !qcom_geni_serial_tx_empty(uport)) {
+		if (uart_fifo_out(uport, &c, 1) == 1) {
+			writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+			qcom_geni_serial_setup_tx(uport, 1);
+			writel(c, uport->membase + SE_GENI_TX_FIFOn);
+		}
+	}
 
 	irq_en = readl(uport->membase +	SE_GENI_M_IRQ_EN);
 	irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
-
 	writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
 	writel(irq_en, uport->membase +	SE_GENI_M_IRQ_EN);
 }
@@ -665,13 +675,17 @@ static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport)
 static void qcom_geni_serial_stop_tx_fifo(struct uart_port *uport)
 {
 	u32 irq_en;
-	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
 	irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
 	writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
 	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
-	/* Possible stop tx is called multiple times. */
+}
+
+static void qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+
 	if (!qcom_geni_serial_main_active(uport))
 		return;
 
@@ -684,6 +698,8 @@ static void qcom_geni_serial_stop_tx_fifo(struct uart_port *uport)
 		writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 	}
 	writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+
+	port->tx_remaining = 0;
 }
 
 static void qcom_geni_serial_handle_rx_fifo(struct uart_port *uport, bool drop)
@@ -862,7 +878,7 @@ static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
 		memset(buf, 0, sizeof(buf));
 		tx_bytes = min(remaining, BYTES_PER_FIFO_WORD);
 
-		tx_bytes = uart_fifo_out(uport, buf, tx_bytes);
+		uart_fifo_out(uport, buf, tx_bytes);
 
 		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
 
@@ -890,13 +906,17 @@ static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
 	else
 		pending = kfifo_len(&tport->xmit_fifo);
 
-	/* All data has been transmitted and acknowledged as received */
-	if (!pending && !status && done) {
+	/* All data has been transmitted or command has been cancelled */
+	if (!pending && done) {
 		qcom_geni_serial_stop_tx_fifo(uport);
 		goto out_write_wakeup;
 	}
 
-	avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
+	if (active)
+		avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
+	else
+		avail = port->tx_fifo_depth;
+
 	avail *= BYTES_PER_FIFO_WORD;
 
 	chunk = min(avail, pending);
@@ -1069,11 +1089,15 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 {
 	disable_irq(uport->irq);
 
-	if (uart_console(uport))
-		return;
-
 	qcom_geni_serial_stop_tx(uport);
 	qcom_geni_serial_stop_rx(uport);
+
+	qcom_geni_serial_cancel_tx_cmd(uport);
+}
+
+static void qcom_geni_serial_flush_buffer(struct uart_port *uport)
+{
+	qcom_geni_serial_cancel_tx_cmd(uport);
 }
 
 static int qcom_geni_serial_port_setup(struct uart_port *uport)
@@ -1532,6 +1556,7 @@ static const struct uart_ops qcom_geni_console_pops = {
 	.request_port = qcom_geni_serial_request_port,
 	.config_port = qcom_geni_serial_config_port,
 	.shutdown = qcom_geni_serial_shutdown,
+	.flush_buffer = qcom_geni_serial_flush_buffer,
 	.type = qcom_geni_serial_get_type,
 	.set_mctrl = qcom_geni_serial_set_mctrl,
 	.get_mctrl = qcom_geni_serial_get_mctrl,
diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h
index 743a72ac34f3..b6c38d2edfd4 100644
--- a/drivers/tty/serial/serial_base.h
+++ b/drivers/tty/serial/serial_base.h
@@ -49,33 +49,3 @@ void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port
 
 int serial_core_register_port(struct uart_driver *drv, struct uart_port *port);
 void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port);
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-
-int serial_base_add_preferred_console(struct uart_driver *drv,
-				      struct uart_port *port);
-
-#else
-
-static inline
-int serial_base_add_preferred_console(struct uart_driver *drv,
-				      struct uart_port *port)
-{
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-
-int serial_base_add_isa_preferred_console(const char *name, int idx);
-
-#else
-
-static inline
-int serial_base_add_isa_preferred_console(const char *name, int idx)
-{
-	return 0;
-}
-
-#endif
diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c
index 73c6ee540c83..4df2a4b10445 100644
--- a/drivers/tty/serial/serial_base_bus.c
+++ b/drivers/tty/serial/serial_base_bus.c
@@ -8,7 +8,6 @@
  * The serial core bus manages the serial core controller instances.
  */
 
-#include <linux/cleanup.h>
 #include <linux/container_of.h>
 #include <linux/device.h>
 #include <linux/idr.h>
@@ -205,134 +204,6 @@ void serial_base_port_device_remove(struct serial_port_device *port_dev)
 	put_device(&port_dev->dev);
 }
 
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-
-static int serial_base_add_one_prefcon(const char *match, const char *dev_name,
-				       int port_id)
-{
-	int ret;
-
-	ret = add_preferred_console_match(match, dev_name, port_id);
-	if (ret == -ENOENT)
-		return 0;
-
-	return ret;
-}
-
-#ifdef __sparc__
-
-/* Handle Sparc ttya and ttyb options as done in console_setup() */
-static int serial_base_add_sparc_console(const char *dev_name, int idx)
-{
-	const char *name;
-
-	switch (idx) {
-	case 0:
-		name = "ttya";
-		break;
-	case 1:
-		name = "ttyb";
-		break;
-	default:
-		return 0;
-	}
-
-	return serial_base_add_one_prefcon(name, dev_name, idx);
-}
-
-#else
-
-static inline int serial_base_add_sparc_console(const char *dev_name, int idx)
-{
-	return 0;
-}
-
-#endif
-
-static int serial_base_add_prefcon(const char *name, int idx)
-{
-	const char *char_match __free(kfree) = NULL;
-	const char *nmbr_match __free(kfree) = NULL;
-	int ret;
-
-	/* Handle ttyS specific options */
-	if (strstarts(name, "ttyS")) {
-		/* No name, just a number */
-		nmbr_match = kasprintf(GFP_KERNEL, "%i", idx);
-		if (!nmbr_match)
-			return -ENODEV;
-
-		ret = serial_base_add_one_prefcon(nmbr_match, name, idx);
-		if (ret)
-			return ret;
-
-		/* Sparc ttya and ttyb */
-		ret = serial_base_add_sparc_console(name, idx);
-		if (ret)
-			return ret;
-	}
-
-	/* Handle the traditional character device name style console=ttyS0 */
-	char_match = kasprintf(GFP_KERNEL, "%s%i", name, idx);
-	if (!char_match)
-		return -ENOMEM;
-
-	return serial_base_add_one_prefcon(char_match, name, idx);
-}
-
-/**
- * serial_base_add_preferred_console - Adds a preferred console
- * @drv: Serial port device driver
- * @port: Serial port instance
- *
- * Tries to add a preferred console for a serial port if specified in the
- * kernel command line. Supports both the traditional character device such
- * as console=ttyS0, and a hardware addressing based console=DEVNAME:0.0
- * style name.
- *
- * Translates the kernel command line option using a hardware based addressing
- * console=DEVNAME:0.0 to the serial port character device such as ttyS0.
- * Cannot be called early for ISA ports, depends on struct device.
- *
- * Note that duplicates are ignored by add_preferred_console().
- *
- * Return: 0 on success, negative error code on failure.
- */
-int serial_base_add_preferred_console(struct uart_driver *drv,
-				      struct uart_port *port)
-{
-	const char *port_match __free(kfree) = NULL;
-	int ret;
-
-	ret = serial_base_add_prefcon(drv->dev_name, port->line);
-	if (ret)
-		return ret;
-
-	port_match = kasprintf(GFP_KERNEL, "%s:%i.%i", dev_name(port->dev),
-			       port->ctrl_id, port->port_id);
-	if (!port_match)
-		return -ENOMEM;
-
-	/* Translate a hardware addressing style console=DEVNAME:0.0 */
-	return serial_base_add_one_prefcon(port_match, drv->dev_name, port->line);
-}
-
-#endif
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-
-/*
- * Early ISA ports initialize the console before there is no struct device.
- * This should be only called from serial8250_isa_init_preferred_console(),
- * other callers are likely wrong and should rely on earlycon instead.
- */
-int serial_base_add_isa_preferred_console(const char *name, int idx)
-{
-	return serial_base_add_prefcon(name, idx);
-}
-
-#endif
-
 static int serial_base_init(void)
 {
 	int ret;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2c1a0254d3f4..2a8006e3d687 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -622,7 +622,7 @@ static ssize_t uart_write(struct tty_struct *tty, const u8 *buf, size_t count)
 		return -EL3HLT;
 
 	port = uart_port_lock(state, flags);
-	if (WARN_ON_ONCE(!state->port.xmit_buf)) {
+	if (!state->port.xmit_buf) {
 		uart_port_unlock(port, flags);
 		return 0;
 	}
@@ -3422,10 +3422,6 @@ int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
 	if (ret)
 		goto err_unregister_ctrl_dev;
 
-	ret = serial_base_add_preferred_console(drv, port);
-	if (ret)
-		goto err_unregister_port_dev;
-
 	ret = serial_core_add_one_port(drv, port);
 	if (ret)
 		goto err_unregister_port_dev;
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 91a338d3cb34..d35f1d24156c 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -64,6 +64,13 @@ static int serial_port_runtime_suspend(struct device *dev)
 	if (port->flags & UPF_DEAD)
 		return 0;
 
+	/*
+	 * Nothing to do on pm_runtime_force_suspend(), see
+	 * DEFINE_RUNTIME_DEV_PM_OPS.
+	 */
+	if (!pm_runtime_enabled(dev))
+		return 0;
+
 	uart_port_lock_irqsave(port, &flags);
 	if (!port_dev->tx_enabled) {
 		uart_port_unlock_irqrestore(port, flags);