diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/n_hdlc.c | 5 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 5 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 1 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_linflexuart.c | 21 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/owl-uart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/rda-uart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/serial_mctrl_gpio.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/sh-sci.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/uartlite.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/xilinx_uartps.c | 8 |
13 files changed, 48 insertions, 18 deletions
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index e55c79eb6430..98361acd3053 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -968,6 +968,11 @@ static int __init n_hdlc_init(void) } /* end of init_module() */ +#ifdef CONFIG_SPARC +#undef __exitdata +#define __exitdata +#endif + static const char hdlc_unregister_ok[] __exitdata = KERN_INFO "N_HDLC: line discipline unregistered\n"; static const char hdlc_unregister_fail[] __exitdata = diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index c68e2b3a1634..836e736ae188 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -141,7 +141,7 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (!up->gpios) { + if (!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS)) { /* * Turn off autoRTS if RTS is lowered and restore autoRTS * setting if RTS is raised @@ -456,7 +456,8 @@ static void omap_8250_set_termios(struct uart_port *port, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW && - !up->gpios) { + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) && + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4789b5d62f63..67a9eb3f94ce 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1032,6 +1032,7 @@ config SERIAL_SIFIVE_CONSOLE bool "Console on SiFive UART" depends on SERIAL_SIFIVE=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Select this option if you would like to use a SiFive UART as the system console. diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 68d74f2b5106..a32f0d2afd59 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -3,7 +3,7 @@ * Freescale linflexuart serial port driver * * Copyright 2012-2016 Freescale Semiconductor, Inc. - * Copyright 2017-2018 NXP + * Copyright 2017-2019 NXP */ #if defined(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE) && \ @@ -246,12 +246,14 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id) struct tty_port *port = &sport->state->port; unsigned long flags, status; unsigned char rx; + bool brk; spin_lock_irqsave(&sport->lock, flags); status = readl(sport->membase + UARTSR); while (status & LINFLEXD_UARTSR_RMB) { rx = readb(sport->membase + BDRM); + brk = false; flg = TTY_NORMAL; sport->icount.rx++; @@ -261,8 +263,11 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id) status |= LINFLEXD_UARTSR_SZF; if (status & LINFLEXD_UARTSR_BOF) status |= LINFLEXD_UARTSR_BOF; - if (status & LINFLEXD_UARTSR_FEF) + if (status & LINFLEXD_UARTSR_FEF) { + if (!rx) + brk = true; status |= LINFLEXD_UARTSR_FEF; + } if (status & LINFLEXD_UARTSR_PE) status |= LINFLEXD_UARTSR_PE; } @@ -271,13 +276,15 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id) sport->membase + UARTSR); status = readl(sport->membase + UARTSR); - if (uart_handle_sysrq_char(sport, (unsigned char)rx)) - continue; - + if (brk) { + uart_handle_break(sport); + } else { #ifdef SUPPORT_SYSRQ - sport->sysrq = 0; + if (uart_handle_sysrq_char(sport, (unsigned char)rx)) + continue; #endif - tty_insert_flip_char(port, rx, flg); + tty_insert_flip_char(port, rx, flg); + } } spin_unlock_irqrestore(&sport->lock, flags); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 3e17bb8a0b16..537896c4d887 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -548,7 +548,7 @@ static void lpuart_flush_buffer(struct uart_port *port) val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; lpuart32_write(&sport->port, val, UARTFIFO); } else { - val = readb(sport->port.membase + UARTPFIFO); + val = readb(sport->port.membase + UARTCFIFO); val |= UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH; writeb(val, sport->port.membase + UARTCFIFO); } diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 87c58f9f6390..5e08f2657b90 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2222,8 +2222,8 @@ static int imx_uart_probe(struct platform_device *pdev) return PTR_ERR(base); rxirq = platform_get_irq(pdev, 0); - txirq = platform_get_irq(pdev, 1); - rtsirq = platform_get_irq(pdev, 2); + txirq = platform_get_irq_optional(pdev, 1); + rtsirq = platform_get_irq_optional(pdev, 2); sport->port.dev = &pdev->dev; sport->port.mapbase = res->start; diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 03963af77b15..d2d8b3494685 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -740,7 +740,7 @@ static int __init owl_uart_init(void) return ret; } -static void __init owl_uart_exit(void) +static void __exit owl_uart_exit(void) { platform_driver_unregister(&owl_uart_platform_driver); uart_unregister_driver(&owl_uart_driver); diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index c1b0d7662ef9..ff9a27d48bca 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -815,7 +815,7 @@ static int __init rda_uart_init(void) return ret; } -static void __init rda_uart_exit(void) +static void __exit rda_uart_exit(void) { platform_driver_unregister(&rda_uart_platform_driver); uart_unregister_driver(&rda_uart_driver); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 6e713be1d4e9..c4a414a46c7f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1964,8 +1964,10 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options> * * The optional form + * * earlycon=<name>,0x<addr>,<options> * console=<name>,0x<addr>,<options> + * * is also accepted; the returned @iotype will be UPIO_MEM. * * Returns 0 on success or -EINVAL on failure diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index d9074303c88e..fb4781292d40 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -66,6 +66,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set); struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx) { + if (gpios == NULL) + return NULL; + return gpios->gpio[gidx]; } EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 4e754a4850e6..22e5d4e13714 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2894,8 +2894,12 @@ static int sci_init_single(struct platform_device *dev, port->mapbase = res->start; sci_port->reg_size = resource_size(res); - for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) - sci_port->irqs[i] = platform_get_irq(dev, i); + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) { + if (i) + sci_port->irqs[i] = platform_get_irq_optional(dev, i); + else + sci_port->irqs[i] = platform_get_irq(dev, i); + } /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index b8b912b5a8b9..06e79c11141d 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -897,7 +897,8 @@ static int __init ulite_init(void) static void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); - uart_unregister_driver(&ulite_uart_driver); + if (ulite_uart_driver.state) + uart_unregister_driver(&ulite_uart_driver); } module_init(ulite_init); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index da4563aaaf5c..4e55bc327a54 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1550,7 +1550,6 @@ static int cdns_uart_probe(struct platform_device *pdev) goto err_out_id; } - uartps_major = cdns_uart_uart_driver->tty_driver->major; cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver; /* @@ -1680,6 +1679,7 @@ static int cdns_uart_probe(struct platform_device *pdev) console_port = NULL; #endif + uartps_major = cdns_uart_uart_driver->tty_driver->major; cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node, "cts-override"); return 0; @@ -1741,6 +1741,12 @@ static int cdns_uart_remove(struct platform_device *pdev) console_port = NULL; #endif + /* If this is last instance major number should be initialized */ + mutex_lock(&bitmap_lock); + if (bitmap_empty(bitmap, MAX_UART_INSTANCES)) + uartps_major = 0; + mutex_unlock(&bitmap_lock); + uart_unregister_driver(cdns_uart_data->cdns_uart_driver); return rc; } |