diff options
Diffstat (limited to 'drivers/tty/serial')
88 files changed, 611 insertions, 516 deletions
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 65d6af755567..c7d34823f715 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -243,7 +243,7 @@ static void serial21285_shutdown(struct uart_port *port) static void serial21285_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, quot, h_lcr, b; diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 8efdc271eb75..fa8ccf204d86 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -755,7 +755,7 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, static void brcmstb_set_termios(struct uart_port *up, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *p8250 = up_to_u8250p(up); struct brcmuart_priv *priv = up->private_data; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 2e83e7367441..94fbf0add2ce 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -298,10 +298,9 @@ static void serial8250_backup_timeout(struct timer_list *t) jiffies + uart_poll_timeout(&up->port) + HZ / 5); } -static int univ8250_setup_irq(struct uart_8250_port *up) +static void univ8250_setup_timer(struct uart_8250_port *up) { struct uart_port *port = &up->port; - int retval = 0; /* * The above check will only give an accurate result the first time @@ -322,10 +321,16 @@ static int univ8250_setup_irq(struct uart_8250_port *up) */ if (!port->irq) mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); - else - retval = serial_link_irq_chain(up); +} - return retval; +static int univ8250_setup_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + if (port->irq) + return serial_link_irq_chain(up); + + return 0; } static void univ8250_release_irq(struct uart_8250_port *up) @@ -381,6 +386,7 @@ static struct uart_ops univ8250_port_ops; static const struct uart_8250_ops univ8250_driver_ops = { .setup_irq = univ8250_setup_irq, .release_irq = univ8250_release_irq, + .setup_timer = univ8250_setup_timer, }; static struct uart_8250_port serial8250_ports[UART_NR]; diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index a8dba4a0a8fb..b85c82616e8c 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -26,9 +26,7 @@ static void __dma_tx_complete(void *param) dma->tx_running = 0; - xmit->tail += dma->tx_size; - xmit->tail &= UART_XMIT_SIZE - 1; - p->port.icount.tx += dma->tx_size; + uart_xmit_advance(&p->port, dma->tx_size); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&p->port); @@ -107,8 +105,7 @@ int serial8250_tx_dma(struct uart_8250_port *p) dma_async_issue_pending(dma->txchan); serial8250_clear_THRI(p); - if (dma->tx_err) - dma->tx_err = 0; + dma->tx_err = 0; return 0; err: diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a604b42e4458..7db51781289e 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -350,7 +350,7 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) } static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long newrate = tty_termios_baud_rate(termios) * 16; struct dw8250_data *d = to_dw8250_data(p->private_data); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index dbe4d44f60d4..75f32f054ebb 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -92,7 +92,8 @@ static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, serial8250_do_set_divisor(p, baud, quot, quot_frac); } -void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old) +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) { p->status &= ~UPSTAT_AUTOCTS; if (termios->c_cflag & CRTSCTS) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 055bfdc87985..f13e91f2cace 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -47,7 +47,7 @@ struct dw8250_data { unsigned int uart_16550_compatible:1; }; -void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old); +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old); void dw8250_setup_port(struct uart_port *p); static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 65b6b3cbaff6..e2aa2a1a02dd 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -278,7 +278,7 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) static void fintek_8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct fintek_8250 *pdata = port->private_data; unsigned int baud = tty_termios_baud_rate(termios); diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 4ba43bef9933..44cc755b1a29 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -70,7 +70,7 @@ static inline struct lpss8250 *to_lpss8250(struct dw8250_port_data *data) } static void byt_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct lpss8250 *lpss = to_lpss8250(p->private_data); diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c index 737c4c31e8a0..f46ca13ff4aa 100644 --- a/drivers/tty/serial/8250/8250_men_mcb.c +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -7,7 +7,6 @@ #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <uapi/linux/serial_core.h> #define MEN_UART_ID_Z025 0x19 #define MEN_UART_ID_Z057 0x39 diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index a2a03acb04ad..2cc78a4bf7a1 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -206,9 +206,8 @@ static void dnv_exit(struct mid8250 *mid) /*****************************************************************************/ -static void mid8250_set_termios(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old) +static void mid8250_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct mid8250 *mid = p->private_data; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 54051ec7b499..fb1d5ec0940e 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -291,7 +291,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) static void mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { static const unsigned short fraction_L_mapping[] = { 0, 1, 0x5, 0x15, 0x55, 0x57, 0x57, 0x77, 0x7F, 0xFF, 0xFF diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index f7fbef83583c..41b8c6b27136 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -342,6 +342,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up) omap8250_update_mdr1(up, priv); up->port.ops->set_mctrl(&up->port, up->port.mctrl); + + if (up->port.rs485.flags & SER_RS485_ENABLED) + serial8250_em485_stop_tx(up); } /* @@ -350,7 +353,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) */ static void omap_8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = up->port.private_data; @@ -984,9 +987,7 @@ static void omap_8250_dma_tx_complete(void *param) dma->tx_running = 0; - xmit->tail += dma->tx_size; - xmit->tail &= UART_XMIT_SIZE - 1; - p->port.icount.tx += dma->tx_size; + uart_xmit_advance(&p->port, dma->tx_size); if (priv->delayed_restore) { priv->delayed_restore = 0; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6f66dc2ebacc..8e9f247590bd 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1232,6 +1232,10 @@ static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port, serial8250_do_set_mctrl(port, mctrl); } +/* + * We require EFR features for clock programming, so set UPF_FULL_PROBE + * for full probing regardless of CONFIG_SERIAL_8250_16550A_VARIANTS setting. + */ static int pci_oxsemi_tornado_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *up, int idx) @@ -1239,6 +1243,7 @@ static int pci_oxsemi_tornado_setup(struct serial_private *priv, struct pci_dev *dev = priv->dev; if (pci_oxsemi_tornado_p(dev)) { + up->port.flags |= UPF_FULL_PROBE; up->port.get_divisor = pci_oxsemi_tornado_get_divisor; up->port.set_divisor = pci_oxsemi_tornado_set_divisor; up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl; @@ -1627,7 +1632,6 @@ static int pci_fintek_init(struct pci_dev *dev) resource_size_t bar_data[3]; u8 config_base; struct serial_private *priv = pci_get_drvdata(dev); - struct uart_8250_port *port; if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || @@ -1674,13 +1678,7 @@ static int pci_fintek_init(struct pci_dev *dev) pci_write_config_byte(dev, config_base + 0x06, dev->irq); - if (priv) { - /* re-apply RS232/485 mode when - * pciserial_resume_ports() - */ - port = serial8250_get_port(priv->line[i]); - uart_rs485_config(&port->port); - } else { + if (!priv) { /* First init without port data * force init to RS232 Mode */ diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 39b35a61958c..fe8662cd9402 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -600,7 +600,7 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put); static int serial8250_em485_init(struct uart_8250_port *p) { if (p->em485) - return 0; + goto deassert_rts; p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_ATOMIC); if (!p->em485) @@ -616,7 +616,9 @@ static int serial8250_em485_init(struct uart_8250_port *p) p->em485->active_timer = NULL; p->em485->tx_stopped = true; - p->rs485_stop_tx(p); +deassert_rts: + if (p->em485->tx_stopped) + p->rs485_stop_tx(p); return 0; } @@ -752,6 +754,14 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) serial8250_rpm_put(p); } +static void serial8250_clear_IER(struct uart_8250_port *up) +{ + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); +} + #ifdef CONFIG_SERIAL_8250_RSA /* * Attempts to turn on the RSA FIFO. Returns zero on failure. @@ -1021,7 +1031,8 @@ static void autoconfig_16550a(struct uart_8250_port *up) up->port.type = PORT_16550A; up->capabilities |= UART_CAP_FIFO; - if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS)) + if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS) && + !(up->port.flags & UPF_FULL_PROBE)) return; /* @@ -1133,7 +1144,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) * internal UARTs. * We're going to explicitly set the UUE bit to 0 before * trying to write and read a 1 just to make sure it's not - * already a 1 and maybe locked there before we even start start. + * already a 1 and maybe locked there before we even start. */ iersave = serial_in(up, UART_IER); serial_out(up, UART_IER, iersave & ~UART_IER_UUE); @@ -1329,10 +1340,7 @@ static void autoconfig(struct uart_8250_port *up) serial8250_out_MCR(up, save_mcr); serial8250_clear_fifos(up); serial_in(up, UART_RX); - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); + serial8250_clear_IER(up); out_unlock: spin_unlock_irqrestore(&port->lock, flags); @@ -2042,6 +2050,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { + if (port->rs485.flags & SER_RS485_ENABLED) + return; + if (port->set_mctrl) port->set_mctrl(port, mctrl); else @@ -2142,10 +2153,7 @@ static void serial8250_put_poll_char(struct uart_port *port, * First save the IER then disable the interrupts */ ier = serial_port_in(port, UART_IER); - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + serial8250_clear_IER(up); wait_for_xmitr(up, UART_LSR_BOTH_EMPTY); /* @@ -2294,6 +2302,10 @@ int serial8250_do_startup(struct uart_port *port) if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) up->port.irqflags |= IRQF_SHARED; + retval = up->ops->setup_irq(up); + if (retval) + goto out; + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; @@ -2336,9 +2348,7 @@ int serial8250_do_startup(struct uart_port *port) } } - retval = up->ops->setup_irq(up); - if (retval) - goto out; + up->ops->setup_timer(up); /* * Now, initialize the UART @@ -2651,7 +2661,7 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int tolerance = port->uartclk / 100; unsigned int min; @@ -2737,7 +2747,7 @@ EXPORT_SYMBOL_GPL(serial8250_update_uartclk); void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *up = up_to_u8250p(port); unsigned char cval; @@ -2875,7 +2885,7 @@ EXPORT_SYMBOL(serial8250_do_set_termios); static void serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { if (port->set_termios) port->set_termios(port, termios, old); @@ -3187,9 +3197,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up); - if (port->rs485.flags & SER_RS485_ENABLED) - uart_rs485_config(port); - /* if access method is AU, it is a 16550 with a quirk */ if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; @@ -3314,8 +3321,13 @@ static void serial8250_console_restore(struct uart_8250_port *up) unsigned int baud, quot, frac = 0; termios.c_cflag = port->cons->cflag; - if (port->state->port.tty && termios.c_cflag == 0) + termios.c_ispeed = port->cons->ispeed; + termios.c_ospeed = port->cons->ospeed; + if (port->state->port.tty && termios.c_cflag == 0) { termios.c_cflag = port->state->port.tty->termios.c_cflag; + termios.c_ispeed = port->state->port.tty->termios.c_ispeed; + termios.c_ospeed = port->state->port.tty->termios.c_ospeed; + } baud = serial8250_get_baud_rate(port, &termios, NULL); quot = serial8250_get_divisor(port, baud, &frac); @@ -3383,11 +3395,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, * First save the IER then disable the interrupts */ ier = serial_port_in(port, UART_IER); - - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + serial8250_clear_IER(up); /* check scratch reg to see if port powered off during system sleep */ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index ba4b63fd511e..13cdd9def087 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -127,6 +127,7 @@ config SERIAL_SB1250_DUART_CONSOLE config SERIAL_ATMEL bool "AT91 on-chip serial port support" + depends on COMMON_CLK depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB @@ -427,7 +428,7 @@ config SERIAL_PXA config SERIAL_PXA_NON8250 bool - depends on !SERIAL_8250 + depends on !SERIAL_8250 || COMPILE_TEST config SERIAL_PXA_CONSOLE bool "Console on PXA serial port (DEPRECATED)" @@ -1325,7 +1326,7 @@ config SERIAL_FSL_LPUART config SERIAL_FSL_LPUART_CONSOLE bool "Console on Freescale lpuart serial port" - depends on SERIAL_FSL_LPUART=y + depends on SERIAL_FSL_LPUART select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index cb791c5149a3..c2d154d78e54 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -9,6 +9,7 @@ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch> */ +#include <linux/bitfield.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -48,7 +49,6 @@ #define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 #define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 #define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 /* * Local per-uart structure. @@ -59,10 +59,19 @@ struct altera_jtaguart { unsigned long imr; /* Local IMR mirror */ }; +static unsigned int altera_jtaguart_tx_space(struct uart_port *port, u32 *ctlp) +{ + u32 ctl = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG); + + if (ctlp) + *ctlp = ctl; + + return FIELD_GET(ALTERA_JTAGUART_CONTROL_WSPACE_MSK, ctl); +} + static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) { - return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; + return altera_jtaguart_tx_space(port, NULL) ? TIOCSER_TEMT : 0; } static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) @@ -106,8 +115,8 @@ static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) } static void altera_jtaguart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { /* Just copy the old termios settings back */ if (old) @@ -150,9 +159,7 @@ static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) pending = uart_circ_chars_pending(xmit); if (pending > 0) { - count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> - ALTERA_JTAGUART_CONTROL_WSPACE_OFF; + count = altera_jtaguart_tx_space(port, NULL); if (count > pending) count = pending; if (count > 0) { @@ -298,17 +305,17 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c) { - unsigned long status; unsigned long flags; + u32 status; spin_lock_irqsave(&port->lock, flags); - while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + while (!altera_jtaguart_tx_space(port, &status)) { + spin_unlock_irqrestore(&port->lock, flags); + if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); return; /* no connection activity */ } - spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); spin_lock_irqsave(&port->lock, flags); } @@ -321,8 +328,7 @@ static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c unsigned long flags; spin_lock_irqsave(&port->lock, flags); - while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + while (!altera_jtaguart_tx_space(port, NULL)) { spin_unlock_irqrestore(&port->lock, flags); cpu_relax(); spin_lock_irqsave(&port->lock, flags); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 8b749ed557c6..82f2790de28d 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -175,7 +175,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state) static void altera_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; @@ -199,9 +199,8 @@ static void altera_uart_set_termios(struct uart_port *port, */ } -static void altera_uart_rx_chars(struct altera_uart *pp) +static void altera_uart_rx_chars(struct uart_port *port) { - struct uart_port *port = &pp->port; unsigned char ch, flag; unsigned short status; @@ -246,9 +245,8 @@ static void altera_uart_rx_chars(struct altera_uart *pp) tty_flip_buffer_push(&port->state->port); } -static void altera_uart_tx_chars(struct altera_uart *pp) +static void altera_uart_tx_chars(struct uart_port *port) { - struct uart_port *port = &pp->port; struct circ_buf *xmit = &port->state->xmit; if (port->x_char) { @@ -272,10 +270,8 @@ static void altera_uart_tx_chars(struct altera_uart *pp) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (xmit->head == xmit->tail) { - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_update_ctrl_reg(pp); - } + if (uart_circ_empty(xmit)) + altera_uart_stop_tx(port); } static irqreturn_t altera_uart_interrupt(int irq, void *data) @@ -288,9 +284,9 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data) spin_lock(&port->lock); if (isr & ALTERA_UART_STATUS_RRDY_MSK) - altera_uart_rx_chars(pp); + altera_uart_rx_chars(port); if (isr & ALTERA_UART_STATUS_TRDY_MSK) - altera_uart_tx_chars(pp); + altera_uart_tx_chars(port); spin_unlock(&port->lock); return IRQ_RETVAL(isr); diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index fae0b581ff42..af27fb8ec145 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -370,7 +370,7 @@ static void pl010_shutdown(struct uart_port *port) static void pl010_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int lcr_h, old_cr; unsigned long flags; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 15f0e4d88c5a..5cdced39eafd 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2030,7 +2030,7 @@ pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios) static void pl011_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2162,7 +2162,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, static void sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2777,6 +2777,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) struct uart_amba_port *uap; struct vendor_data *vendor = id->data; int portnr, ret; + u32 val; portnr = pl011_find_free_port(); if (portnr < 0) @@ -2801,6 +2802,21 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.rs485_supported = pl011_rs485_supported; snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + if (device_property_read_u32(&dev->dev, "reg-io-width", &val) == 0) { + switch (val) { + case 1: + uap->port.iotype = UPIO_MEM; + break; + case 4: + uap->port.iotype = UPIO_MEM32; + break; + default: + dev_warn(&dev->dev, "unsupported reg-io-width (%d)\n", + val); + return -EINVAL; + } + } + ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr); if (ret) return ret; diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 9ef82d870ff2..450f4edfda0f 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -228,7 +228,7 @@ static void apbuart_shutdown(struct uart_port *port) } static void apbuart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, const struct ktermios *old) { unsigned int cr; unsigned long flags; diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 32caeac12985..925484a42c82 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -283,7 +283,7 @@ static void ar933x_uart_get_scale_step(unsigned int clk, static void ar933x_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct ar933x_uart_port *up = container_of(port, struct ar933x_uart_port, port); @@ -583,6 +583,13 @@ static const struct uart_ops ar933x_uart_ops = { static int ar933x_config_rs485(struct uart_port *port, struct ktermios *termios, struct serial_rs485 *rs485conf) { + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + if (port->rs485.flags & SER_RS485_ENABLED) + gpiod_set_value(up->rts_gpiod, + !!(rs485conf->flags & SER_RS485_RTS_AFTER_SEND)); + return 0; } diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 2a09e92ef9ed..2a65ea2660e1 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -351,7 +351,7 @@ static void arc_serial_shutdown(struct uart_port *port) static void arc_serial_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct arc_uart_port *uart = to_arc_port(port); unsigned int baud, uartl, uarth, hw_val; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 7450d3853031..bd07f79a2df9 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/tty_flip.h> @@ -110,6 +111,7 @@ struct atmel_uart_char { struct atmel_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ + struct clk *gclk; /* uart generic clock */ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ @@ -150,6 +152,7 @@ struct atmel_uart_port { u32 rts_low; bool ms_irq_enabled; u32 rtor; /* address of receiver timeout register if it exists */ + bool is_usart; bool has_frac_baudrate; bool has_hw_timer; struct timer_list uart_timer; @@ -228,6 +231,11 @@ static inline int atmel_uart_is_half_duplex(struct uart_port *port) (port->iso7816.flags & SER_ISO7816_ENABLED); } +static inline int atmel_error_rate(int desired_value, int actual_value) +{ + return 100 - (desired_value * 100) / actual_value; +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -1825,6 +1833,7 @@ static void atmel_get_ip_name(struct uart_port *port) */ atmel_port->has_frac_baudrate = false; atmel_port->has_hw_timer = false; + atmel_port->is_usart = false; if (name == new_uart) { dev_dbg(port->dev, "Uart with hw timer"); @@ -1834,6 +1843,7 @@ static void atmel_get_ip_name(struct uart_port *port) dev_dbg(port->dev, "Usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; + atmel_port->is_usart = true; atmel_port->rtor = ATMEL_US_RTOR; version = atmel_uart_readl(port, ATMEL_US_VERSION); switch (version) { @@ -1863,6 +1873,7 @@ static void atmel_get_ip_name(struct uart_port *port) dev_dbg(port->dev, "This version is usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; + atmel_port->is_usart = true; atmel_port->rtor = ATMEL_US_RTOR; break; case 0x203: @@ -2113,6 +2124,8 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * This is called on uart_close() or a suspend event. */ clk_disable_unprepare(atmel_port->clk); + if (__clk_is_enabled(atmel_port->gclk)) + clk_disable_unprepare(atmel_port->gclk); break; default: dev_err(port->dev, "atmel_serial: unknown pm %d\n", state); @@ -2122,19 +2135,25 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, /* * Change the port parameters */ -static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void atmel_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned long flags; - unsigned int old_mode, mode, imr, quot, baud, div, cd, fp = 0; + unsigned int old_mode, mode, imr, quot, div, cd, fp = 0; + unsigned int baud, actual_baud, gclk_rate; + int ret; /* save the current mode register */ mode = old_mode = atmel_uart_readl(port, ATMEL_US_MR); /* reset the mode, clock divisor, parity, stop bits and data size */ - mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | - ATMEL_US_PAR | ATMEL_US_USMODE); + if (atmel_port->is_usart) + mode &= ~(ATMEL_US_NBSTOP | ATMEL_US_PAR | ATMEL_US_CHRL | + ATMEL_US_USCLKS | ATMEL_US_USMODE); + else + mode &= ~(ATMEL_UA_BRSRCCK | ATMEL_US_PAR | ATMEL_UA_FILTER); baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); @@ -2282,10 +2301,60 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, cd = uart_get_divisor(port, baud); } - if (cd > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + /* + * If the current value of the Clock Divisor surpasses the 16 bit + * ATMEL_US_CD mask and the IP is USART, switch to the Peripheral + * Clock implicitly divided by 8. + * If the IP is UART however, keep the highest possible value for + * the CD and avoid needless division of CD, since UART IP's do not + * support implicit division of the Peripheral Clock. + */ + if (atmel_port->is_usart && cd > ATMEL_US_CD) { cd /= 8; mode |= ATMEL_US_USCLKS_MCK_DIV8; + } else { + cd = min_t(unsigned int, cd, ATMEL_US_CD); + } + + /* + * If there is no Fractional Part, there is a high chance that + * we may be able to generate a baudrate closer to the desired one + * if we use the GCLK as the clock source driving the baudrate + * generator. + */ + if (!atmel_port->has_frac_baudrate) { + if (__clk_is_enabled(atmel_port->gclk)) + clk_disable_unprepare(atmel_port->gclk); + gclk_rate = clk_round_rate(atmel_port->gclk, 16 * baud); + actual_baud = clk_get_rate(atmel_port->clk) / (16 * cd); + if (gclk_rate && abs(atmel_error_rate(baud, actual_baud)) > + abs(atmel_error_rate(baud, gclk_rate / 16))) { + clk_set_rate(atmel_port->gclk, 16 * baud); + ret = clk_prepare_enable(atmel_port->gclk); + if (ret) + goto gclk_fail; + + if (atmel_port->is_usart) { + mode &= ~ATMEL_US_USCLKS; + mode |= ATMEL_US_USCLKS_GCLK; + } else { + mode |= ATMEL_UA_BRSRCCK; + } + + /* + * Set the Clock Divisor for GCLK to 1. + * Since we were able to generate the smallest + * multiple of the desired baudrate times 16, + * then we surely can generate a bigger multiple + * with the exact error rate for an equally increased + * CD. Thus no need to take into account + * a higher value for CD. + */ + cd = 1; + } } + +gclk_fail: quot = cd | fp << ATMEL_US_FP_OFFSET; if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) @@ -2881,6 +2950,12 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret) goto err; + atmel_port->gclk = devm_clk_get_optional(&pdev->dev, "gclk"); + if (IS_ERR(atmel_port->gclk)) { + ret = PTR_ERR(atmel_port->gclk); + goto err_clk_disable_unprepare; + } + ret = atmel_init_port(atmel_port, pdev); if (ret) goto err_clk_disable_unprepare; diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h index 0d8a0f9cc5c3..87f8f7996307 100644 --- a/drivers/tty/serial/atmel_serial.h +++ b/drivers/tty/serial/atmel_serial.h @@ -9,6 +9,8 @@ * Based on AT91RM9200 datasheet revision E. */ +#include <linux/bitfield.h> + #ifndef ATMEL_SERIAL_H #define ATMEL_SERIAL_H @@ -39,39 +41,42 @@ #define ATMEL_US_MR 0x04 /* Mode Register */ #define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 +#define ATMEL_US_USMODE_NORMAL FIELD_PREP(ATMEL_US_USMODE, 0) +#define ATMEL_US_USMODE_RS485 FIELD_PREP(ATMEL_US_USMODE, 1) +#define ATMEL_US_USMODE_HWHS FIELD_PREP(ATMEL_US_USMODE, 2) +#define ATMEL_US_USMODE_MODEM FIELD_PREP(ATMEL_US_USMODE, 3) +#define ATMEL_US_USMODE_ISO7816_T0 FIELD_PREP(ATMEL_US_USMODE, 4) +#define ATMEL_US_USMODE_ISO7816_T1 FIELD_PREP(ATMEL_US_USMODE, 6) +#define ATMEL_US_USMODE_IRDA FIELD_PREP(ATMEL_US_USMODE, 8) #define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) +#define ATMEL_US_USCLKS_MCK FIELD_PREP(ATMEL_US_USCLKS, 0) +#define ATMEL_US_USCLKS_MCK_DIV8 FIELD_PREP(ATMEL_US_USCLKS, 1) +#define ATMEL_US_USCLKS_GCLK FIELD_PREP(ATMEL_US_USCLKS, 2) +#define ATMEL_US_USCLKS_SCK FIELD_PREP(ATMEL_US_USCLKS, 3) +#define ATMEL_UA_FILTER BIT(4) #define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) +#define ATMEL_US_CHRL_5 FIELD_PREP(ATMEL_US_CHRL, 0) +#define ATMEL_US_CHRL_6 FIELD_PREP(ATMEL_US_CHRL, 1) +#define ATMEL_US_CHRL_7 FIELD_PREP(ATMEL_US_CHRL, 2) +#define ATMEL_US_CHRL_8 FIELD_PREP(ATMEL_US_CHRL, 3) #define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ #define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) +#define ATMEL_US_PAR_EVEN FIELD_PREP(ATMEL_US_PAR, 0) +#define ATMEL_US_PAR_ODD FIELD_PREP(ATMEL_US_PAR, 1) +#define ATMEL_US_PAR_SPACE FIELD_PREP(ATMEL_US_PAR, 2) +#define ATMEL_US_PAR_MARK FIELD_PREP(ATMEL_US_PAR, 3) +#define ATMEL_US_PAR_NONE FIELD_PREP(ATMEL_US_PAR, 4) +#define ATMEL_US_PAR_MULTI_DROP FIELD_PREP(ATMEL_US_PAR, 6) #define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) +#define ATMEL_US_NBSTOP_1 FIELD_PREP(ATMEL_US_NBSTOP, 0) +#define ATMEL_US_NBSTOP_1_5 FIELD_PREP(ATMEL_US_NBSTOP, 1) +#define ATMEL_US_NBSTOP_2 FIELD_PREP(ATMEL_US_NBSTOP, 2) +#define ATMEL_UA_BRSRCCK BIT(12) /* Clock Selection for UART */ #define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) +#define ATMEL_US_CHMODE_NORMAL FIELD_PREP(ATMEL_US_CHMODE, 0) +#define ATMEL_US_CHMODE_ECHO FIELD_PREP(ATMEL_US_CHMODE, 1) +#define ATMEL_US_CHMODE_LOC_LOOP FIELD_PREP(ATMEL_US_CHMODE, 2) +#define ATMEL_US_CHMODE_REM_LOOP FIELD_PREP(ATMEL_US_CHMODE, 3) #define ATMEL_US_MSBF BIT(16) /* Bit Order */ #define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ #define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ @@ -79,7 +84,7 @@ #define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ #define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ #define ATMEL_US_MAX_ITER_MASK GENMASK(26, 24) /* Max Iterations */ -#define ATMEL_US_MAX_ITER(n) (((n) << 24) & ATMEL_US_MAX_ITER_MASK) +#define ATMEL_US_MAX_ITER(n) FIELD_PREP(ATMEL_US_MAX_ITER_MASK, (n)) #define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ #define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ @@ -131,19 +136,19 @@ #define ATMEL_US_CMPR 0x90 /* Comparaison Register */ #define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ -#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ -#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ +#define ATMEL_US_TXRDYM(data) FIELD_PREP(GENMASK(1, 0), (data)) /* TX Ready Mode */ +#define ATMEL_US_RXRDYM(data) FIELD_PREP(GENMASK(5, 4), (data)) /* RX Ready Mode */ #define ATMEL_US_ONE_DATA 0x0 #define ATMEL_US_TWO_DATA 0x1 #define ATMEL_US_FOUR_DATA 0x2 #define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ -#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ -#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ -#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ +#define ATMEL_US_TXFTHRES(thr) FIELD_PREP(GENMASK(13, 8), (thr)) /* TX FIFO Threshold */ +#define ATMEL_US_RXFTHRES(thr) FIELD_PREP(GENMASK(21, 16), (thr)) /* RX FIFO Threshold */ +#define ATMEL_US_RXFTHRES2(thr) FIELD_PREP(GENMASK(29, 24), (thr)) /* RX FIFO Threshold2 */ #define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ -#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ -#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ +#define ATMEL_US_TXFL(reg) FIELD_GET(GENMASK(5, 0), (reg)) /* TX FIFO Level */ +#define ATMEL_US_RXFL(reg) FIELD_GET(GENMASK(21, 16), (reg)) /* RX FIFO Level */ #define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ #define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 53b43174aa40..5d9737c2d1f2 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -492,9 +492,8 @@ static void bcm_uart_shutdown(struct uart_port *port) /* * serial core request to change current uart setting */ -static void bcm_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) +static void bcm_uart_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { unsigned int ctl, baud, quot, ier; unsigned long flags; diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index b9b66ad31a08..404b43a5ae33 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -251,7 +251,7 @@ static void uart_clps711x_shutdown(struct uart_port *port) static void uart_clps711x_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { u32 ubrlcr; unsigned int baud, quot; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h index 8c582779cf22..0577618e78c0 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -87,7 +87,6 @@ struct uart_cpm_port { struct gpio_desc *gpios[NUM_GPIOS]; }; -extern int cpm_uart_nr; extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index db07d6a5d764..b4369ed45ae2 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -484,12 +484,11 @@ static void cpm_uart_shutdown(struct uart_port *port) static void cpm_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { int baud; unsigned long flags; u16 cval, scval, prev_mode; - int bits, sbits; struct uart_cpm_port *pinfo = container_of(port, struct uart_cpm_port, port); smc_t __iomem *smcp = pinfo->smcp; @@ -515,28 +514,17 @@ static void cpm_uart_set_termios(struct uart_port *port, if (maxidl > 0x10) maxidl = 0x10; - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ cval = 0; scval = 0; - /* byte size */ - bits = tty_get_char_size(termios->c_cflag); - sbits = bits - 5; - if (termios->c_cflag & CSTOPB) { cval |= SMCMR_SL; /* Two stops */ scval |= SCU_PSMR_SL; - bits++; } if (termios->c_cflag & PARENB) { cval |= SMCMR_PEN; scval |= SCU_PSMR_PEN; - bits++; if (!(termios->c_cflag & PARODD)) { cval |= SMCMR_PM_EVEN; scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); @@ -580,12 +568,9 @@ static void cpm_uart_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; if (IS_SMC(pinfo)) { + unsigned int bits = tty_get_frame_size(termios->c_cflag); + /* * MRBLR can be changed while an SMC/SCC is operating only * if it is done in a single bus cycle with one 16-bit move @@ -604,13 +589,17 @@ static void cpm_uart_set_termios(struct uart_port *port, */ prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); /* Output in *one* operation, so we don't interrupt RX/TX if they - * were already enabled. */ - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | - SMCMR_SM_UART | prev_mode); + * were already enabled. + * Character length programmed into the register is frame bits minus 1. + */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits - 1) | cval | + SMCMR_SM_UART | prev_mode); } else { + unsigned int bits = tty_get_char_size(termios->c_cflag); + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); out_be16(&pinfo->sccup->scc_maxidl, maxidl); - out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + out_be16(&sccp->scc_psmr, (UART_LCR_WLEN(bits) << 12) | scval); } if (pinfo->clk) @@ -1214,12 +1203,6 @@ static int cpm_uart_init_port(struct device_node *np, pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; spin_lock_init(&pinfo->port.lock); - pinfo->port.irq = irq_of_parse_and_map(np, 0); - if (pinfo->port.irq == NO_IRQ) { - ret = -EINVAL; - goto out_pram; - } - for (i = 0; i < NUM_GPIOS; i++) { struct gpio_desc *gpiod; @@ -1229,7 +1212,7 @@ static int cpm_uart_init_port(struct device_node *np, if (IS_ERR(gpiod)) { ret = PTR_ERR(gpiod); - goto out_irq; + goto out_pram; } if (gpiod) { @@ -1255,8 +1238,6 @@ static int cpm_uart_init_port(struct device_node *np, return cpm_uart_request_port(&pinfo->port); -out_irq: - irq_dispose_mapping(pinfo->port.irq); out_pram: cpm_uart_unmap_pram(pinfo, pram); out_mem: @@ -1436,11 +1417,17 @@ static int cpm_uart_probe(struct platform_device *ofdev) /* initialize the device pointer for the port */ pinfo->port.dev = &ofdev->dev; + pinfo->port.irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (!pinfo->port.irq) + return -EINVAL; + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); - if (ret) - return ret; + if (!ret) + return uart_add_one_port(&cpm_reg, &pinfo->port); + + irq_dispose_mapping(pinfo->port.irq); - return uart_add_one_port(&cpm_reg, &pinfo->port); + return ret; } static int cpm_uart_remove(struct platform_device *ofdev) diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index af951e6a2ef4..0c0a62346f23 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -287,7 +287,7 @@ static void digicolor_uart_shutdown(struct uart_port *port) static void digicolor_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, divisor; u8 config = 0; diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index 2e21acf39720..829b452daee9 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -559,7 +559,7 @@ static void dz_reset(struct dz_port *dport) } static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct dz_port *dport = to_dport(uport); unsigned long flags; @@ -592,9 +592,12 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Try to keep unchanged. */ - baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); - bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { + if (old_termios) { + /* Keep unchanged. */ + baud = tty_termios_baud_rate(old_termios); + bflag = dz_encode_baud_rate(baud); + } if (bflag < 0) { /* Resort to 9600. */ baud = 9600; bflag = DZ_B9600; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 88d08ba1ca83..a5f380584cda 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -67,7 +67,7 @@ static void __init earlycon_init(struct earlycon_device *device, if (*s) earlycon->index = simple_strtoul(s, NULL, 10); len = s - name; - strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name))); + strscpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name))); earlycon->data = &early_console_dev; } @@ -123,7 +123,7 @@ static int __init parse_options(struct earlycon_device *device, char *options) device->baud = simple_strtoul(options, NULL, 0); length = min(strcspn(options, " ") + 1, (size_t)(sizeof(device->options))); - strlcpy(device->options, options, length); + strscpy(device->options, options, length); } return 0; @@ -304,7 +304,7 @@ int __init of_setup_earlycon(const struct earlycon_id *match, if (options) { early_console_dev.baud = simple_strtoul(options, NULL, 0); - strlcpy(early_console_dev.options, options, + strscpy(early_console_dev.options, options, sizeof(early_console_dev.options)); } earlycon_init(&early_console_dev, match->name); diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 98bb0c315e13..84e8153e5420 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -401,7 +401,7 @@ static void linflex_shutdown(struct uart_port *port) static void linflex_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned long cr, old_cr, cr1; diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index fbc4b071b330..67fa113f77d4 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1284,17 +1284,12 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) struct dma_slave_config dma_rx_sconfig = {}; struct circ_buf *ring = &sport->rx_ring; int ret, nent; - int bits, baud; struct tty_port *port = &sport->port.state->port; struct tty_struct *tty = port->tty; struct ktermios *termios = &tty->termios; struct dma_chan *chan = sport->dma_rx_chan; - - baud = tty_get_baud_rate(tty); - - bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10; - if (termios->c_cflag & PARENB) - bits++; + unsigned int bits = tty_get_frame_size(termios->c_cflag); + unsigned int baud = tty_get_baud_rate(tty); /* * Calculate length of one DMA buffer size to keep latency below @@ -1776,6 +1771,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) if (sport->lpuart_dma_rx_use) { del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); + sport->lpuart_dma_rx_use = false; } if (sport->lpuart_dma_tx_use) { @@ -1784,6 +1780,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) sport->dma_tx_in_progress = false; dmaengine_terminate_all(sport->dma_tx_chan); } + sport->lpuart_dma_tx_use = false; } if (sport->dma_tx_chan) @@ -1833,7 +1830,7 @@ static void lpuart32_shutdown(struct uart_port *port) static void lpuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2073,7 +2070,7 @@ static void lpuart32_serial_setbrg(struct lpuart_port *sport, static void lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2729,15 +2726,13 @@ static int lpuart_probe(struct platform_device *pdev) if (ret) goto failed_reset; - ret = uart_add_one_port(&lpuart_reg, &sport->port); - if (ret) - goto failed_attach_port; - ret = uart_get_rs485_mode(&sport->port); if (ret) goto failed_get_rs485; - uart_rs485_config(&sport->port); + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) + goto failed_attach_port; ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0, DRIVER_NAME, sport); @@ -2747,9 +2742,9 @@ static int lpuart_probe(struct platform_device *pdev) return 0; failed_irq_request: -failed_get_rs485: uart_remove_one_port(&lpuart_reg, &sport->port); failed_attach_port: +failed_get_rs485: failed_reset: lpuart_disable_clks(sport); return ret; @@ -2800,7 +2795,7 @@ static int __maybe_unused lpuart_suspend(struct device *dev) * EDMA driver during suspend will forcefully release any * non-idle DMA channels. If port wakeup is enabled or if port * is console port or 'no_console_suspend' is set the Rx DMA - * cannot resume as as expected, hence gracefully release the + * cannot resume as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ if (irq_wake) { diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 45df29947fe8..819f957b6b84 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -1351,9 +1351,8 @@ static void icom_close(struct uart_port *port) kref_put(&icom_port->adapter->kref, icom_kref_release); } -static void icom_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) +static void icom_set_termios(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old_termios) { struct icom_port *icom_port = to_icom_port(port); int baud; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 522445a8f666..05b432dc7a85 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -380,8 +380,7 @@ static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2) { *ucr2 &= ~(UCR2_CTSC | UCR2_CTS); - sport->port.mctrl |= TIOCM_RTS; - mctrl_gpio_set(sport->gpios, sport->port.mctrl); + mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS); } /* called with port.lock taken and irqs caller dependent */ @@ -390,8 +389,7 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2) *ucr2 &= ~UCR2_CTSC; *ucr2 |= UCR2_CTS; - sport->port.mctrl &= ~TIOCM_RTS; - mctrl_gpio_set(sport->gpios, sport->port.mctrl); + mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS); } static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) @@ -1620,7 +1618,7 @@ static void imx_uart_flush_buffer(struct uart_port *port) static void imx_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; @@ -2347,8 +2345,6 @@ static int imx_uart_probe(struct platform_device *pdev) dev_err(&pdev->dev, "low-active RTS not possible when receiver is off, enabling receiver\n"); - uart_rs485_config(&sport->port); - /* Disable interrupts before requesting them */ ucr1 = imx_uart_readl(sport, UCR1); ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index 655e64b26852..dd0a8915ce4f 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -873,7 +873,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_ip22zilog_port *up = container_of(port, struct uart_ip22zilog_port, port); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 0ea799bf8dbb..417a5b6bffc3 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -211,7 +211,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) break; default: - return -ENXIO; + rc = -ENXIO; + goto out_kfree_brd; } rc = request_irq(brd->irq, brd->bd_ops->intr, IRQF_SHARED, "JSM", brd); diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index cb58bdec2f43..222afc270c88 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -300,8 +300,8 @@ static void jsm_tty_close(struct uart_port *port) } static void jsm_tty_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) + struct ktermios *termios, + const struct ktermios *old_termios) { unsigned long lock_flags; struct jsm_channel *channel = diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index a3120c3347dd..c892f3c7d1ab 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -8,6 +8,7 @@ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/console.h> #include <linux/device.h> @@ -93,7 +94,6 @@ #define ASCFSTAT_RXFFLMASK 0x003F #define ASCFSTAT_TXFFLMASK 0x3F00 #define ASCFSTAT_TXFREEMASK 0x3F000000 -#define ASCFSTAT_TXFREEOFF 24 static void lqasc_tx_chars(struct uart_port *port); static struct ltq_uart_port *lqasc_port[MAXPORTS]; @@ -139,6 +139,13 @@ lqasc_stop_tx(struct uart_port *port) return; } +static bool lqasc_tx_ready(struct uart_port *port) +{ + u32 fstat = __raw_readl(port->membase + LTQ_ASC_FSTAT); + + return FIELD_GET(ASCFSTAT_TXFREEMASK, fstat); +} + static void lqasc_start_tx(struct uart_port *port) { @@ -228,8 +235,7 @@ lqasc_tx_chars(struct uart_port *port) return; } - while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & - ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { + while (lqasc_tx_ready(port)) { if (port->x_char) { writeb(port->x_char, port->membase + LTQ_ASC_TBUF); port->icount.tx++; @@ -405,8 +411,8 @@ lqasc_shutdown(struct uart_port *port) } static void -lqasc_set_termios(struct uart_port *port, - struct ktermios *new, struct ktermios *old) +lqasc_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { unsigned int cflag; unsigned int iflag; @@ -600,15 +606,12 @@ static const struct uart_ops lqasc_pops = { static void lqasc_console_putchar(struct uart_port *port, unsigned char ch) { - int fifofree; - if (!port->membase) return; - do { - fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) - & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; - } while (fifofree == 0); + while (!lqasc_tx_ready(port)) + ; + writeb(ch, port->membase + LTQ_ASC_TBUF); } diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 328b50521f14..4c0604325ee9 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -178,7 +178,7 @@ static void liteuart_shutdown(struct uart_port *port) } static void liteuart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned long flags; diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 93140cac1ca1..ed47f4768338 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -278,6 +278,13 @@ static void __serial_lpc32xx_rx(struct uart_port *port) static void serial_lpc32xx_stop_tx(struct uart_port *port); +static bool serial_lpc32xx_tx_ready(struct uart_port *port) +{ + u32 level = readl(LPC32XX_HSUART_LEVEL(port->membase)); + + return LPC32XX_HSU_TX_LEV(level) < 64; +} + static void __serial_lpc32xx_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -293,8 +300,7 @@ static void __serial_lpc32xx_tx(struct uart_port *port) goto exit_tx; /* Transfer data */ - while (LPC32XX_HSU_TX_LEV(readl( - LPC32XX_HSUART_LEVEL(port->membase))) < 64) { + while (serial_lpc32xx_tx_ready(port)) { writel((u32) xmit->buf[xmit->tail], LPC32XX_HSUART_FIFO(port->membase)); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -493,7 +499,7 @@ static void serial_lpc32xx_shutdown(struct uart_port *port) /* port->lock is not held. */ static void serial_lpc32xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, quot; diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 0b5f21fbb53d..c69602f356fd 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -418,7 +418,7 @@ static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) static void max3100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct max3100_port *s = container_of(port, struct max3100_port, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 7cf81f692ac4..fbf6e2b3161c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -906,7 +906,7 @@ static void max310x_break_ctl(struct uart_port *port, int break_state) static void max310x_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int lcr = 0, flow = 0; int baud; diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index f4aaaadd0742..b1cd9a76dd93 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -192,7 +192,7 @@ static void mcf_shutdown(struct uart_port *port) /****************************************************************************/ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 12117b596e73..3690f5cf0f43 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -646,8 +646,8 @@ static void men_z135_shutdown(struct uart_port *port) } static void men_z135_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct men_z135_port *uart = to_men_z135(port); unsigned int baud; diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 6c8db19fd572..056243c12836 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -335,7 +335,7 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) static void meson_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int cflags, iflags, baud; unsigned long flags; @@ -667,29 +667,6 @@ static struct uart_driver meson_uart_driver = { .cons = MESON_SERIAL_CONSOLE, }; -static inline struct clk *meson_uart_probe_clock(struct device *dev, - const char *id) -{ - struct clk *clk = NULL; - int ret; - - clk = devm_clk_get(dev, id); - if (IS_ERR(clk)) - return clk; - - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(dev, "couldn't enable clk\n"); - return ERR_PTR(ret); - } - - devm_add_action_or_reset(dev, - (void(*)(void *))clk_disable_unprepare, - clk); - - return clk; -} - static int meson_uart_probe_clocks(struct platform_device *pdev, struct uart_port *port) { @@ -697,15 +674,15 @@ static int meson_uart_probe_clocks(struct platform_device *pdev, struct clk *clk_pclk = NULL; struct clk *clk_baud = NULL; - clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk"); + clk_pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); if (IS_ERR(clk_pclk)) return PTR_ERR(clk_pclk); - clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal"); + clk_xtal = devm_clk_get_enabled(&pdev->dev, "xtal"); if (IS_ERR(clk_xtal)) return PTR_ERR(clk_xtal); - clk_baud = meson_uart_probe_clock(&pdev->dev, "baud"); + clk_baud = devm_clk_get_enabled(&pdev->dev, "baud"); if (IS_ERR(clk_baud)) return PTR_ERR(clk_baud); diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index 347088bb380e..c15e0d84dc7e 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -298,7 +298,8 @@ static void mlb_usio_shutdown(struct uart_port *port) } static void mlb_usio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int escr, smr = MLB_USIO_SMR_SOE; unsigned long flags, baud, quot; diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 3f1986c89694..73362d4bc45d 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -101,7 +101,7 @@ struct psc_ops { void (*cw_restore_ints)(struct uart_port *port); unsigned int (*set_baudrate)(struct uart_port *port, struct ktermios *new, - struct ktermios *old); + const struct ktermios *old); int (*clock_alloc)(struct uart_port *port); void (*clock_relse)(struct uart_port *port); int (*clock)(struct uart_port *port, int enable); @@ -287,7 +287,7 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -305,7 +305,7 @@ static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -533,7 +533,7 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port) static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -880,7 +880,7 @@ static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc, static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -1167,7 +1167,7 @@ mpc52xx_uart_shutdown(struct uart_port *port) static void mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned char mr1, mr2; @@ -1364,7 +1364,7 @@ static const struct uart_ops mpc52xx_uart_ops = { /* Interrupt handling */ /* ======================================================================== */ -static inline unsigned int +static inline bool mpc52xx_uart_int_rx_chars(struct uart_port *port) { struct tty_port *tport = &port->state->port; @@ -1425,7 +1425,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) return psc_ops->raw_rx_rdy(port); } -static inline int +static inline bool mpc52xx_uart_int_tx_chars(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -1435,13 +1435,13 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) psc_ops->write_char(port, port->x_char); port->icount.tx++; port->x_char = 0; - return 1; + return true; } /* Nothing to do ? */ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { mpc52xx_uart_stop_tx(port); - return 0; + return false; } /* Send chars */ @@ -1460,23 +1460,23 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) /* Maybe we're done after all */ if (uart_circ_empty(xmit)) { mpc52xx_uart_stop_tx(port); - return 0; + return false; } - return 1; + return true; } static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port) { unsigned long pass = ISR_PASS_LIMIT; - unsigned int keepgoing; + bool keepgoing; u8 status; /* While we have stuff to do, we continue */ do { /* If we don't find anything to do, we stop */ - keepgoing = 0; + keepgoing = false; psc_ops->rx_clr_irq(port); if (psc_ops->rx_rdy(port)) @@ -1495,7 +1495,7 @@ mpc5xxx_uart_process_int(struct uart_port *port) /* Limit number of iteration */ if (!(--pass)) - keepgoing = 0; + keepgoing = false; } while (keepgoing); diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c index 5e9429dcc51f..2e3e6cf16817 100644 --- a/drivers/tty/serial/mps2-uart.c +++ b/drivers/tty/serial/mps2-uart.c @@ -358,7 +358,7 @@ static void mps2_uart_shutdown(struct uart_port *port) static void mps2_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, bauddiv; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 3159889ddae1..7dd19a281579 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1263,7 +1263,7 @@ static void msm_shutdown(struct uart_port *port) } static void msm_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct msm_port *msm_port = to_msm_port(port); struct msm_dma *dma = &msm_port->rx_dma; diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 0ba0f4d9459d..ed0e763f622a 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -289,7 +289,7 @@ static void mux_shutdown(struct uart_port *port) */ static void mux_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { } diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 65eaecd10b7c..ba16e1da6bd3 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -564,7 +564,7 @@ static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned in static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, min_baud, max_baud; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 1944daf8593a..d21a4f3ef2fe 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -959,7 +959,7 @@ err_out: #define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS) static void mxs_auart_settermios(struct uart_port *u, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct mxs_auart_port *s = to_auart_port(u); u32 ctrl, ctrl2, div; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0aa666e247d5..7d0d2718ef59 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -300,8 +300,7 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_OMAP_SCR, up->scr); res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0; - if (up->rts_gpiod && - gpiod_get_value(up->rts_gpiod) != res) { + if (gpiod_get_value(up->rts_gpiod) != res) { if (port->rs485.delay_rts_after_send > 0) mdelay( port->rs485.delay_rts_after_send); @@ -337,19 +336,24 @@ static void serial_omap_stop_rx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } +static void serial_omap_put_char(struct uart_omap_port *up, unsigned char ch) +{ + serial_out(up, UART_TX, ch); + + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; +} + static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) { struct circ_buf *xmit = &up->port.state->xmit; int count; if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); + serial_omap_put_char(up, up->port.x_char); up->port.icount.tx++; up->port.x_char = 0; - if ((up->port.rs485.flags & SER_RS485_ENABLED) && - !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) - up->rs485_tx_filter_count++; - return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { @@ -358,12 +362,9 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) } count = up->port.fifosize / 4; do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); + serial_omap_put_char(up, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; - if ((up->port.rs485.flags & SER_RS485_ENABLED) && - !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) - up->rs485_tx_filter_count++; if (uart_circ_empty(xmit)) break; @@ -397,7 +398,7 @@ static void serial_omap_start_tx(struct uart_port *port) /* if rts not already enabled */ res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; - if (up->rts_gpiod && gpiod_get_value(up->rts_gpiod) != res) { + if (gpiod_get_value(up->rts_gpiod) != res) { gpiod_set_value(up->rts_gpiod, res); if (port->rs485.delay_rts_before_send > 0) mdelay(port->rs485.delay_rts_before_send); @@ -802,7 +803,7 @@ static void serial_omap_uart_qos_work(struct work_struct *work) static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_omap_port *up = to_uart_omap_port(port); unsigned char cval = 0; @@ -1336,13 +1337,11 @@ serial_omap_config_rs485(struct uart_port *port, struct ktermios *termios, up->ier = 0; serial_out(up, UART_IER, 0); - if (up->rts_gpiod) { - /* enable / disable rts */ - val = (rs485->flags & SER_RS485_ENABLED) ? - SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; - val = (rs485->flags & val) ? 1 : 0; - gpiod_set_value(up->rts_gpiod, val); - } + /* enable / disable rts */ + val = (rs485->flags & SER_RS485_ENABLED) ? + SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; + val = (rs485->flags & val) ? 1 : 0; + gpiod_set_value(up->rts_gpiod, val); /* Enable interrupts */ up->ier = mode; @@ -1547,11 +1546,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, ret = PTR_ERR(up->rts_gpiod); if (ret == -EPROBE_DEFER) return ret; - /* - * FIXME: the code historically ignored any other error than - * -EPROBE_DEFER and just went on without GPIO. - */ + up->rts_gpiod = NULL; + up->port.rs485_supported = (const struct serial_rs485) { }; + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_err(dev, "disabling RS-485 (rts-gpio missing in device tree)\n"); + memset(rs485conf, 0, sizeof(*rs485conf)); + } } else { gpiod_set_consumer_name(up->rts_gpiod, "omap-serial"); } diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 888e17e3f25f..fde39cc1145d 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -328,7 +328,7 @@ static void owl_uart_change_baudrate(struct owl_uart_port *owl_port, static void owl_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct owl_uart_port *owl_port = to_owl_uart_port(port); unsigned int baud; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 8a9065e4a903..c59ce7886579 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -898,9 +898,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) fifo_size--; } - bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); + bytes = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (!bytes) { dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); @@ -1301,7 +1299,8 @@ static void pch_uart_shutdown(struct uart_port *port) *bits. Update read_status_mask and ignore_status_mask to indicate *the types of events we are interested in receiving. */ static void pch_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { int rtn; unsigned int baud, parity, bits, stb; diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index f418f1de66b3..2beada66c824 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -50,7 +50,7 @@ * @irq_rx_name: irq rx name * @irq_tx: virtual tx interrupt number * @irq_tx_name: irq tx name - * @cts_gpio: clear to send gpio + * @cts_gpiod: clear to send GPIO * @dev: device descriptor **/ struct pic32_sport { @@ -65,8 +65,7 @@ struct pic32_sport { const char *irq_tx_name; bool enable_tx_irq; - bool hw_flow_ctrl; - int cts_gpio; + struct gpio_desc *cts_gpiod; struct clk *clk; @@ -158,25 +157,16 @@ static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) PIC32_UART_MODE_LPBK); } -/* get the state of CTS input pin for this port */ -static unsigned int get_cts_state(struct pic32_sport *sport) -{ - /* read and invert UxCTS */ - if (gpio_is_valid(sport->cts_gpio)) - return !gpio_get_value(sport->cts_gpio); - - return 1; -} - /* serial core request to return the state of misc UART input pins */ static unsigned int pic32_uart_get_mctrl(struct uart_port *port) { struct pic32_sport *sport = to_pic32_sport(port); unsigned int mctrl = 0; - if (!sport->hw_flow_ctrl) + /* get the state of CTS input pin for this port */ + if (!sport->cts_gpiod) mctrl |= TIOCM_CTS; - else if (get_cts_state(sport)) + else if (gpiod_get_value(sport->cts_gpiod)) mctrl |= TIOCM_CTS; /* DSR and CD are not supported in PIC32, so return 1 @@ -609,7 +599,7 @@ static void pic32_uart_shutdown(struct uart_port *port) /* serial core request to change current uart setting */ static void pic32_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct pic32_sport *sport = to_pic32_sport(port); unsigned int baud; @@ -648,7 +638,7 @@ static void pic32_uart_set_termios(struct uart_port *port, PIC32_UART_MODE_PDSEL0); } /* if hw flow ctrl, then the pins must be specified in device tree */ - if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) { + if ((new->c_cflag & CRTSCTS) && sport->cts_gpiod) { /* enable hardware flow control */ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), PIC32_UART_MODE_UEN1); @@ -875,7 +865,8 @@ static struct uart_driver pic32_uart_driver = { static int pic32_uart_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; struct pic32_sport *sport; int uart_idx = 0; struct resource *res_mem; @@ -904,25 +895,10 @@ static int pic32_uart_probe(struct platform_device *pdev) /* Hardware flow control: gpios * !Note: Basically, CTS is needed for reading the status. */ - sport->hw_flow_ctrl = false; - sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0); - if (gpio_is_valid(sport->cts_gpio)) { - sport->hw_flow_ctrl = true; - - ret = devm_gpio_request(sport->dev, - sport->cts_gpio, "CTS"); - if (ret) { - dev_err(&pdev->dev, - "error requesting CTS GPIO\n"); - goto err; - } - - ret = gpio_direction_input(sport->cts_gpio); - if (ret) { - dev_err(&pdev->dev, "error setting CTS GPIO\n"); - goto err; - } - } + sport->cts_gpiod = devm_gpiod_get_optional(dev, "cts", GPIOD_IN); + if (IS_ERR(sport->cts_gpiod)) + return dev_err_probe(dev, PTR_ERR(sport->cts_gpiod), "error requesting CTS GPIO\n"); + gpiod_set_consumer_name(sport->cts_gpiod, "CTS"); pic32_sports[uart_idx] = sport; port = &sport->port; @@ -943,7 +919,7 @@ static int pic32_uart_probe(struct platform_device *pdev) } #ifdef CONFIG_SERIAL_PIC32_CONSOLE - if (uart_console(port) && (pic32_console.flags & CON_ENABLED)) { + if (uart_console_enabled(port)) { /* The peripheral clock has been enabled by console_setup, * so disable it till the port is used. */ diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index f63257b8e872..fe2e4ec423f7 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1202,7 +1202,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long baud; @@ -1244,7 +1244,7 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, /* The port lock is not held. */ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long flags; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 9309ffd87c8e..2d25231fad84 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -423,7 +423,7 @@ static void serial_pxa_shutdown(struct uart_port *port) static void serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char cval, fcr = 0; diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index f4698a064a4d..83b66b73303a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -22,6 +22,7 @@ #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <dt-bindings/interconnect/qcom,icc.h> /* UART specific GENI registers */ #define SE_UART_LOOPBACK_CFG 0x22c @@ -1005,7 +1006,8 @@ static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud, } static void qcom_geni_serial_set_termios(struct uart_port *uport, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int baud; u32 bits_per_char; @@ -1524,7 +1526,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev) * even with no_console_suspend */ if (uart_console(uport)) { - geni_icc_set_tag(&port->se, 0x3); + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ACTIVE_ONLY); geni_icc_set_bw(&port->se); } return uart_suspend_port(private_data->drv, uport); @@ -1539,7 +1541,7 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) ret = uart_resume_port(private_data->drv, uport); if (uart_console(uport)) { - geni_icc_set_tag(&port->se, 0x7); + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ALWAYS); geni_icc_set_bw(&port->se); } return ret; diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index feb2054aba37..0e387e2144fa 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -238,7 +238,7 @@ static void rda_uart_change_baudrate(struct rda_uart_port *rda_port, static void rda_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct rda_uart_port *rda_port = to_rda_uart_port(port); unsigned long flags; diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index 6689d8add8f7..b81afb06f1f4 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -370,9 +370,8 @@ static void __rp2_uart_set_termios(struct rp2_uart_port *up, up->ucode + RP2_RX_SWFLOW); } -static void rp2_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) +static void rp2_uart_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { struct rp2_uart_port *up = port_to_up(port); unsigned long flags; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index e64e42a19d1a..dd9e3253cab4 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -409,7 +409,7 @@ static void sa1100_shutdown(struct uart_port *port) static void sa1100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sa1100_port *sport = container_of(port, struct sa1100_port, port); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index b7a4b47ce74e..77d1363029f5 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -1530,7 +1530,7 @@ static const u16 udivslot_table[16] = { static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 2cf8533ef760..c5d2b6cdcb4a 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -531,7 +531,7 @@ static void sbd_init_port(struct sbd_port *sport) } static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct sbd_port *sport = to_sport(uport); unsigned int mode1 = 0, mode2 = 0, aux = 0; diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index d983692c59e0..524921360ca7 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1015,7 +1015,7 @@ static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) static void sc16is7xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index c56de2e104d4..dd98509f52e5 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -636,7 +636,8 @@ static void sccnxp_break_ctl(struct uart_port *port, int break_state) } static void sccnxp_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct sccnxp_port *s = dev_get_drvdata(port->dev); unsigned long flags; diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index a5748e41483b..b7170cb9a544 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1270,14 +1270,14 @@ static void tegra_uart_enable_ms(struct uart_port *u) } static void tegra_uart_set_termios(struct uart_port *u, - struct ktermios *termios, struct ktermios *oldtermios) + struct ktermios *termios, + const struct ktermios *oldtermios) { struct tegra_uart_port *tup = to_tegra_uport(u); unsigned int baud; unsigned long flags; unsigned int lcr; unsigned char char_bits; - int symb_bit = 1; struct clk *parent_clk = clk_get_parent(tup->uart_clk); unsigned long parent_clk_rate = clk_get_rate(parent_clk); int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; @@ -1304,7 +1304,6 @@ static void tegra_uart_set_termios(struct uart_port *u, termios->c_cflag &= ~CMSPAR; if ((termios->c_cflag & PARENB) == PARENB) { - symb_bit++; if (termios->c_cflag & PARODD) { lcr |= UART_LCR_PARITY; lcr &= ~UART_LCR_EPAR; @@ -1317,22 +1316,18 @@ static void tegra_uart_set_termios(struct uart_port *u, } char_bits = tty_get_char_size(termios->c_cflag); - symb_bit += char_bits; lcr &= ~UART_LCR_WLEN8; lcr |= UART_LCR_WLEN(char_bits); /* Stop bits */ - if (termios->c_cflag & CSTOPB) { + if (termios->c_cflag & CSTOPB) lcr |= UART_LCR_STOP; - symb_bit += 2; - } else { + else lcr &= ~UART_LCR_STOP; - symb_bit++; - } tegra_uart_write(tup, lcr, UART_LCR); tup->lcr_shadow = lcr; - tup->symb_bit = symb_bit; + tup->symb_bit = tty_get_frame_size(termios->c_cflag); /* Baud rate. */ baud = uart_get_baud_rate(u, termios, oldtermios, diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 12c87cd201a7..179ee199df34 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -49,7 +49,7 @@ static struct lock_class_key port_lock_key; #define RS485_MAX_RTS_DELAY 100 /* msecs */ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios); + const struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, enum uart_pm_state pm_state); @@ -158,15 +158,10 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) unsigned long flags; unsigned int old; - if (port->rs485.flags & SER_RS485_ENABLED) { - set &= ~TIOCM_RTS; - clear &= ~TIOCM_RTS; - } - spin_lock_irqsave(&port->lock, flags); old = port->mctrl; port->mctrl = (old & ~clear) | set; - if (old != port->mctrl) + if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED)) port->ops->set_mctrl(port, port->mctrl); spin_unlock_irqrestore(&port->lock, flags); } @@ -380,7 +375,7 @@ EXPORT_SYMBOL(uart_update_timeout); */ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old, unsigned int min, unsigned int max) + const struct ktermios *old, unsigned int min, unsigned int max) { unsigned int try; unsigned int baud; @@ -492,7 +487,7 @@ EXPORT_SYMBOL(uart_get_divisor); /* Caller holds port mutex */ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct uart_port *uport = uart_port_check(state); struct ktermios *termios; @@ -1391,7 +1386,7 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); } -int uart_rs485_config(struct uart_port *port) +static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; int ret; @@ -1405,7 +1400,6 @@ int uart_rs485_config(struct uart_port *port) return ret; } -EXPORT_SYMBOL_GPL(uart_rs485_config); static int uart_get_rs485_config(struct uart_port *port, struct serial_rs485 __user *rs485) @@ -1444,8 +1438,13 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, spin_lock_irqsave(&port->lock, flags); ret = port->rs485_config(port, &tty->termios, &rs485); - if (!ret) + if (!ret) { port->rs485 = rs485; + + /* Reset RTS and other mctrl lines when disabling RS485 */ + if (!(rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + } spin_unlock_irqrestore(&port->lock, flags); if (ret) return ret; @@ -1619,7 +1618,7 @@ static void uart_set_ldisc(struct tty_struct *tty) } static void uart_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct uart_state *state = tty->driver_data; struct uart_port *uport; @@ -2352,7 +2351,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->stop_tx(uport); - ops->set_mctrl(uport, 0); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); /* save mctrl so it can be restored on resume */ mctrl = uport->mctrl; uport->mctrl = 0; @@ -2440,7 +2440,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) uart_change_pm(state, UART_PM_STATE_ON); spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, 0); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); if (console_suspend_enabled || !uart_console(uport)) { /* Protected by port mutex for now */ @@ -2451,7 +2452,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (tty) uart_change_speed(tty, state, NULL); spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, uport->mctrl); + else + uart_rs485_config(uport); ops->start_tx(uport); spin_unlock_irq(&uport->lock); tty_port_set_initialized(port, 1); @@ -2497,7 +2501,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) "MMIO 0x%llx", (unsigned long long)port->mapbase); break; default: - strlcpy(address, "*unknown*", sizeof(address)); + strscpy(address, "*unknown*", sizeof(address)); break; } @@ -2558,10 +2562,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, */ spin_lock_irqsave(&port->lock, flags); port->mctrl &= TIOCM_DTR; - if (port->rs485.flags & SER_RS485_ENABLED && - !(port->rs485.flags & SER_RS485_RTS_AFTER_SEND)) - port->mctrl |= TIOCM_RTS; - port->ops->set_mctrl(port, port->mctrl); + if (!(port->rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + else + uart_rs485_config(port); spin_unlock_irqrestore(&port->lock, flags); /* diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 228e380db080..e12f1dc18c38 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -594,7 +594,7 @@ static void serial_txx9_shutdown(struct uart_port *up) static void serial_txx9_set_termios(struct uart_port *up, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int cval, fcr = 0; unsigned long flags; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 0075a1420005..62f773286d44 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1407,10 +1407,8 @@ static void sci_dma_tx_work_fn(struct work_struct *work) spin_lock_irq(&port->lock); head = xmit->head; tail = xmit->tail; - buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1)); - s->tx_dma_len = min_t(unsigned int, - CIRC_CNT(head, tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE)); + buf = s->tx_dma_addr + tail; + s->tx_dma_len = CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE); if (!s->tx_dma_len) { /* Transmit buffer has been flushed */ spin_unlock_irq(&port->lock); @@ -2367,7 +2365,7 @@ static void sci_reset(struct uart_port *port) } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, smr_val = SCSMR_ASYNC, scr_val = 0, i, bits; unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0; diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 4b1d4fe8458e..7fb6760b5c37 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -646,7 +646,7 @@ static int sifive_serial_clk_notifier(struct notifier_block *nb, static void sifive_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); unsigned long flags; diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 4329b9c9cbf0..342a87967631 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -771,9 +771,8 @@ static void sprd_shutdown(struct uart_port *port) devm_free_irq(port->dev, port->irq, port); } -static void sprd_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) +static void sprd_set_termios(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old) { unsigned int baud, quot; unsigned int lcr = 0, fc; diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index cce42f4c9bc2..fcecea689a0d 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -500,7 +500,7 @@ static void asc_pm(struct uart_port *port, unsigned int state, } static void asc_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct asc_port *ascport = to_asc_port(port); struct gpio_desc *gpiod; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 2c85dbf165c4..dfdbcf092fac 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -37,7 +37,7 @@ /* Register offsets */ -static struct stm32_usart_info stm32f4_info = { +static struct stm32_usart_info __maybe_unused stm32f4_info = { .ofs = { .isr = 0x00, .rdr = 0x04, @@ -58,7 +58,7 @@ static struct stm32_usart_info stm32f4_info = { } }; -static struct stm32_usart_info stm32f7_info = { +static struct stm32_usart_info __maybe_unused stm32f7_info = { .ofs = { .cr1 = 0x00, .cr2 = 0x04, @@ -80,7 +80,7 @@ static struct stm32_usart_info stm32f7_info = { } }; -static struct stm32_usart_info stm32h7_info = { +static struct stm32_usart_info __maybe_unused stm32h7_info = { .ofs = { .cr1 = 0x00, .cr2 = 0x04, @@ -131,6 +131,53 @@ static void stm32_usart_clr_bits(struct uart_port *port, u32 reg, u32 bits) writel_relaxed(val, port->membase + reg); } +static unsigned int stm32_usart_tx_empty(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) + return TIOCSER_TEMT; + + return 0; +} + +static void stm32_usart_rs485_rts_enable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } +} + +static void stm32_usart_rs485_rts_disable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } +} + static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, u32 delay_DDE, u32 baud) { @@ -214,6 +261,12 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + /* Adjust RTS polarity in case it's driven in software */ + if (stm32_usart_tx_empty(port)) + stm32_usart_rs485_rts_disable(port); + else + stm32_usart_rs485_rts_enable(port); + return 0; } @@ -529,42 +582,6 @@ static void stm32_usart_tc_interrupt_disable(struct uart_port *port) stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TCIE); } -static void stm32_usart_rs485_rts_enable(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; - - if (stm32_port->hw_flow_control || - !(rs485conf->flags & SER_RS485_ENABLED)) - return; - - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } -} - -static void stm32_usart_rs485_rts_disable(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; - - if (stm32_port->hw_flow_control || - !(rs485conf->flags & SER_RS485_ENABLED)) - return; - - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } -} - static void stm32_usart_transmit_chars_pio(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -807,17 +824,6 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) return IRQ_HANDLED; } -static unsigned int stm32_usart_tx_empty(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - - if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) - return TIOCSER_TEMT; - - return 0; -} - static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -1089,7 +1095,7 @@ static void stm32_usart_shutdown(struct uart_port *port) static void stm32_usart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index eafada8fb6fa..1938ba5e98c0 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -323,7 +323,7 @@ static void sunhv_shutdown(struct uart_port *port) /* port->lock is not held. */ static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); unsigned int quot = uart_get_divisor(port, baud); diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index 60c73662f955..7afe61a0e72e 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -333,7 +333,7 @@ static void sunplus_shutdown(struct uart_port *port) static void sunplus_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *oldtermios) + const struct ktermios *oldtermios) { u32 ext, div, div_l, div_h, baud, lcr; u32 clk = port->uartclk; diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 6ea52293d9f3..99608b2a2b74 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -681,27 +681,23 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla unsigned int quot) { unsigned char dafo; - int bits, n, m; + int n, m; /* Byte size and parity */ switch (cflag & CSIZE) { - case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; - case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; - case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + case CS5: dafo = SAB82532_DAFO_CHL5; break; + case CS6: dafo = SAB82532_DAFO_CHL6; break; + case CS7: dafo = SAB82532_DAFO_CHL7; break; + case CS8: dafo = SAB82532_DAFO_CHL8; break; /* Never happens, but GCC is too dumb to figure it out */ - default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + default: dafo = SAB82532_DAFO_CHL5; break; } - if (cflag & CSTOPB) { + if (cflag & CSTOPB) dafo |= SAB82532_DAFO_STOP; - bits++; - } - if (cflag & PARENB) { + if (cflag & PARENB) dafo |= SAB82532_DAFO_PARE; - bits++; - } if (cflag & PARODD) { dafo |= SAB82532_DAFO_PAR_ODD; @@ -776,7 +772,7 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla /* port->lock is not held. */ static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_sunsab_port *up = container_of(port, struct uart_sunsab_port, port); diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 84d545e5a8c7..9ea7e567540d 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -897,7 +897,7 @@ sunsu_change_speed(struct uart_port *port, unsigned int cflag, static void sunsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, quot; @@ -1217,13 +1217,13 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) serio->id.type = SERIO_RS232; if (up->su_type == SU_PORT_KBD) { serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "sukbd", sizeof(serio->name)); + strscpy(serio->name, "sukbd", sizeof(serio->name)); } else { serio->id.proto = SERIO_SUN; serio->id.extra = 1; - strlcpy(serio->name, "sums", sizeof(serio->name)); + strscpy(serio->name, "sums", sizeof(serio->name)); } - strlcpy(serio->phys, + strscpy(serio->phys, (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), sizeof(serio->phys)); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index c14275d83b0b..87425290687d 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -938,7 +938,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_sunzilog_port *up = container_of(port, struct uart_sunzilog_port, port); @@ -1307,13 +1307,13 @@ static void sunzilog_register_serio(struct uart_sunzilog_port *up) serio->id.type = SERIO_RS232; if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "zskbd", sizeof(serio->name)); + strscpy(serio->name, "zskbd", sizeof(serio->name)); } else { serio->id.proto = SERIO_SUN; serio->id.extra = 1; - strlcpy(serio->name, "zsms", sizeof(serio->name)); + strscpy(serio->name, "zsms", sizeof(serio->name)); } - strlcpy(serio->phys, + strscpy(serio->phys, ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? "zs/serio0" : "zs/serio1"), sizeof(serio->phys)); diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index 889b701ba7c6..23500b342da7 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -126,7 +126,7 @@ static void tegra_tcu_uart_shutdown(struct uart_port *port) static void tegra_tcu_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { } diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 08941eabe7b1..bb19ed012def 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -275,8 +275,8 @@ static int get_bindex(int baud) } static void timbuart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int baud; short bindex; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 880e2afbb97b..eca41ac5477c 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -314,8 +314,9 @@ static void ulite_shutdown(struct uart_port *port) clk_disable(pdata->clk); } -static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void ulite_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) { unsigned long flags; struct uartlite_data *pdata = port->private_data; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 3cc9ef08455c..82cf14dd3d43 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -843,7 +843,8 @@ static void qe_uart_shutdown(struct uart_port *port) * Set the serial port parameters. */ static void qe_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct uart_qe_port *qe_port = container_of(port, struct uart_qe_port, port); @@ -853,13 +854,6 @@ static void qe_uart_set_termios(struct uart_port *port, u16 upsmr = ioread16be(&uccp->upsmr); struct ucc_uart_pram __iomem *uccup = qe_port->uccup; u16 supsmr = ioread16be(&uccup->supsmr); - u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ /* byte size */ upsmr &= UCC_UART_UPSMR_CL_MASK; @@ -869,22 +863,18 @@ static void qe_uart_set_termios(struct uart_port *port, case CS5: upsmr |= UCC_UART_UPSMR_CL_5; supsmr |= UCC_UART_SUPSMR_CL_5; - char_length += 5; break; case CS6: upsmr |= UCC_UART_UPSMR_CL_6; supsmr |= UCC_UART_SUPSMR_CL_6; - char_length += 6; break; case CS7: upsmr |= UCC_UART_UPSMR_CL_7; supsmr |= UCC_UART_SUPSMR_CL_7; - char_length += 7; break; default: /* case CS8 */ upsmr |= UCC_UART_UPSMR_CL_8; supsmr |= UCC_UART_SUPSMR_CL_8; - char_length += 8; break; } @@ -892,13 +882,11 @@ static void qe_uart_set_termios(struct uart_port *port, if (termios->c_cflag & CSTOPB) { upsmr |= UCC_UART_UPSMR_SL; supsmr |= UCC_UART_SUPSMR_SL; - char_length++; /* + SL */ } if (termios->c_cflag & PARENB) { upsmr |= UCC_UART_UPSMR_PEN; supsmr |= UCC_UART_SUPSMR_PEN; - char_length++; /* + PEN */ if (!(termios->c_cflag & PARODD)) { upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | @@ -953,7 +941,7 @@ static void qe_uart_set_termios(struct uart_port *port, iowrite16be(upsmr, &uccp->upsmr); if (soft_uart) { iowrite16be(supsmr, &uccup->supsmr); - iowrite8(char_length, &uccup->rx_length); + iowrite8(tty_get_frame_size(termios->c_cflag), &uccup->rx_length); /* Soft-UART requires a 1X multiplier for TX */ qe_setbrg(qe_port->us_info.rx_clock, baud, 16); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 6f08136ce78a..10fbdb09965f 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -187,6 +187,13 @@ static void handle_rx(struct uart_port *port) tty_flip_buffer_push(tport); } +static unsigned int vt8500_tx_empty(struct uart_port *port) +{ + unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f; + + return idx < 16 ? TIOCSER_TEMT : 0; +} + static void handle_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -201,7 +208,7 @@ static void handle_tx(struct uart_port *port) return; } - while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { + while (vt8500_tx_empty(port)) { if (uart_circ_empty(xmit)) break; @@ -260,12 +267,6 @@ static irqreturn_t vt8500_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static unsigned int vt8500_tx_empty(struct uart_port *port) -{ - return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? - TIOCSER_TEMT : 0; -} - static unsigned int vt8500_get_mctrl(struct uart_port *port) { unsigned int usr; @@ -355,7 +356,7 @@ static void vt8500_shutdown(struct uart_port *port) static void vt8500_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct vt8500_port *vt8500_port = container_of(port, struct vt8500_port, uart); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 9e01fe6c0ab8..2eff7cff57c4 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -2,7 +2,7 @@ /* * Cadence UART driver (found in Xilinx Zynq) * - * 2011 - 2014 (C) Xilinx Inc. + * Copyright (c) 2011 - 2014 Xilinx, Inc. * * This driver has originally been pushed by Xilinx using a Zynq-branding. This * still shows in the naming of this file, the kconfig symbols and some symbols @@ -361,6 +361,8 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) isrstatus &= ~CDNS_UART_IXR_TXEMPTY; } + isrstatus &= port->read_status_mask; + isrstatus &= ~port->ignore_status_mask; /* * Skip RX processing if RX is disabled as RXEMPTY will never be set * as read bytes will not be removed from the FIFO. @@ -675,7 +677,8 @@ static void cdns_uart_break_ctl(struct uart_port *port, int ctl) * @old: Values of the previously saved termios structure */ static void cdns_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { u32 cval = 0; unsigned int baud, minbaud, maxbaud; @@ -1130,8 +1133,35 @@ static struct uart_driver cdns_uart_uart_driver; */ static void cdns_uart_console_putchar(struct uart_port *port, unsigned char ch) { - while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) + unsigned int ctrl_reg; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { + ctrl_reg = readl(port->membase + CDNS_UART_CR); + if (!(ctrl_reg & CDNS_UART_CR_TX_DIS)) + break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for Enable\n"); + return; + } + cpu_relax(); + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { + ctrl_reg = readl(port->membase + CDNS_UART_SR); + + if (!(ctrl_reg & CDNS_UART_SR_TXFULL)) + break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX fifo\n"); + return; + } cpu_relax(); + } writel(ch, port->membase + CDNS_UART_FIFO); } @@ -1329,12 +1359,20 @@ static int cdns_uart_resume(struct device *device) unsigned long flags; u32 ctrl_reg; int may_wake; + int ret; may_wake = device_may_wakeup(device); if (console_suspend_enabled && uart_console(port) && !may_wake) { - clk_enable(cdns_uart->pclk); - clk_enable(cdns_uart->uartclk); + ret = clk_enable(cdns_uart->pclk); + if (ret) + return ret; + + ret = clk_enable(cdns_uart->uartclk); + if (ret) { + clk_disable(cdns_uart->pclk); + return ret; + } spin_lock_irqsave(&port->lock, flags); @@ -1383,9 +1421,17 @@ static int __maybe_unused cdns_runtime_resume(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); struct cdns_uart *cdns_uart = port->private_data; + int ret; - clk_enable(cdns_uart->pclk); - clk_enable(cdns_uart->uartclk); + ret = clk_enable(cdns_uart->pclk); + if (ret) + return ret; + + ret = clk_enable(cdns_uart->uartclk); + if (ret) { + clk_disable(cdns_uart->pclk); + return ret; + } return 0; }; @@ -1551,6 +1597,8 @@ static int cdns_uart_probe(struct platform_device *pdev) port->dev = &pdev->dev; port->uartclk = clk_get_rate(cdns_uart_data->uartclk); port->private_data = cdns_uart_data; + port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT; cdns_uart_data->port = port; platform_set_drvdata(pdev, port); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 5bc58591665a..688db7d8b748 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -846,7 +846,7 @@ static void zs_reset(struct zs_port *zport) } static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct zs_port *zport = to_zport(uport); struct zs_scc *scc = zport->scc; |