diff options
Diffstat (limited to 'drivers/tty/serial/uartlite.c')
| -rw-r--r-- | drivers/tty/serial/uartlite.c | 91 |
1 files changed, 80 insertions, 11 deletions
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index dfc1ba4e1572..d3d9566e5dbd 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -8,6 +8,7 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/serial_core.h> @@ -63,9 +64,18 @@ static struct uart_port *console_port; #endif +/** + * struct uartlite_data: Driver private data + * reg_ops: Functions to read/write registers + * clk: Our parent clock, if present + * baud: The baud rate configured when this device was synthesized + * cflags: The cflags for parity and data bits + */ struct uartlite_data { const struct uartlite_reg_ops *reg_ops; struct clk *clk; + unsigned int baud; + tcflag_t cflags; }; struct uartlite_reg_ops { @@ -119,6 +129,8 @@ static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) static struct uart_port ulite_ports[ULITE_NR_UARTS]; +static struct uart_driver ulite_uart_driver; + /* --------------------------------------------------------------------- * Core UART driver operations */ @@ -306,7 +318,12 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int baud; + struct uartlite_data *pdata = port->private_data; + + /* Set termios to what the hardware supports */ + termios->c_cflag &= ~(BRKINT | CSTOPB | PARENB | PARODD | CSIZE); + termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE); + tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud); spin_lock_irqsave(&port->lock, flags); @@ -329,8 +346,7 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; /* update timeout */ - baud = uart_get_baud_rate(port, termios, old, 0, 460800); - uart_update_timeout(port, termios->c_cflag, baud); + uart_update_timeout(port, termios->c_cflag, pdata->baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -532,8 +548,6 @@ static int ulite_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct uart_driver ulite_uart_driver; - static struct console ulite_console = { .name = ULITE_NAME, .write = ulite_console_write, @@ -765,18 +779,73 @@ static int ulite_probe(struct platform_device *pdev) struct uartlite_data *pdata; int irq, ret; int id = pdev->id; -#ifdef CONFIG_OF - const __be32 *prop; - prop = of_get_property(pdev->dev.of_node, "port-number", NULL); - if (prop) - id = be32_to_cpup(prop); -#endif pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data), GFP_KERNEL); if (!pdata) return -ENOMEM; + if (IS_ENABLED(CONFIG_OF)) { + const char *prop; + struct device_node *np = pdev->dev.of_node; + u32 val = 0; + + prop = "port-number"; + ret = of_property_read_u32(np, prop, &id); + if (ret && ret != -EINVAL) +of_err: + return dev_err_probe(&pdev->dev, ret, + "could not read %s\n", prop); + + prop = "current-speed"; + ret = of_property_read_u32(np, prop, &pdata->baud); + if (ret) + goto of_err; + + prop = "xlnx,use-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + if (val) { + prop = "xlnx,odd-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret) + goto of_err; + + if (val) + pdata->cflags |= PARODD; + pdata->cflags |= PARENB; + } + + val = 8; + prop = "xlnx,data-bits"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + switch (val) { + case 5: + pdata->cflags |= CS5; + break; + case 6: + pdata->cflags |= CS6; + break; + case 7: + pdata->cflags |= CS7; + break; + case 8: + pdata->cflags |= CS8; + break; + default: + return dev_err_probe(&pdev->dev, -EINVAL, + "bad data bits %d\n", val); + } + } else { + pdata->baud = 9600; + pdata->cflags = CS8; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; |